mt8183-kukui-jacuzzi has an anx7625 bridge connected to the output of
its DSI host. However, after commit fd0310b6fe7d ("drm/bridge: anx7625:
add MIPI DPI input feature"), a bus-type property started being required
in the endpoint node by the driver to indicate whether it is DSI or DPI.

Add the missing bus-type property and set it to 5
(V4L2_FWNODE_BUS_TYPE_PARALLEL) so that the driver has its input
configured to DSI and the display pipeline can probe correctly.

While at it, also set the data-lanes property that was also introduced
in that same commit, so that we don't rely on the default value.

Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---
v1: https://lore.kernel.org/all/20220120224204.773117-1-nfraprado@collabora.com

Changes in v2:
- (thanks Rob) Use proper format when refering to commit in commit
  message as pointed out by checkpatch

 arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 8f7bf33f607d..e8f133dc96b9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -171,6 +171,8 @@ port@0 {
 
 			anx7625_in: endpoint {
 				remote-endpoint = <&dsi_out>;
+				bus-type = <5>;
+				data-lanes = <0 1 2 3>;
 			};
 		};
 
-- 
2.35.1

Sorry, I forgot to add the reviewed-by from v1. Added below.

On Tue, Feb 01, 2022 at 12:46:43PM -0500, Nícolas F. R. A. Prado wrote:
> mt8183-kukui-jacuzzi has an anx7625 bridge connected to the output of
> its DSI host. However, after commit fd0310b6fe7d ("drm/bridge: anx7625:
> add MIPI DPI input feature"), a bus-type property started being required
> in the endpoint node by the driver to indicate whether it is DSI or DPI.
> 
> Add the missing bus-type property and set it to 5
> (V4L2_FWNODE_BUS_TYPE_PARALLEL) so that the driver has its input
> configured to DSI and the display pipeline can probe correctly.
> 
> While at it, also set the data-lanes property that was also introduced
> in that same commit, so that we don't rely on the default value.
> 
> Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

> 
> ---
> v1: https://lore.kernel.org/all/20220120224204.773117-1-nfraprado@collabora.com
> 
> Changes in v2:
> - (thanks Rob) Use proper format when refering to commit in commit
>   message as pointed out by checkpatch
> 
>  arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> index 8f7bf33f607d..e8f133dc96b9 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> @@ -171,6 +171,8 @@ port@0 {
>  
>  			anx7625_in: endpoint {
>  				remote-endpoint = <&dsi_out>;
> +				bus-type = <5>;
> +				data-lanes = <0 1 2 3>;
>  			};
>  		};
>  
> -- 
> 2.35.1
> 
> 
> -- 
> To unsubscribe, send mail to kernel-unsubscribe@lists.collabora.co.uk.

Hi,

(CC-ed DRM bridge maintainers and the dri-devel ML)

On Wed, Feb 2, 2022 at 1:47 AM Nícolas F. R. A. Prado
<nfraprado@collabora.com> wrote:
>
> mt8183-kukui-jacuzzi has an anx7625 bridge connected to the output of
> its DSI host. However, after commit fd0310b6fe7d ("drm/bridge: anx7625:
> add MIPI DPI input feature"), a bus-type property started being required
> in the endpoint node by the driver to indicate whether it is DSI or DPI.
>
> Add the missing bus-type property and set it to 5
> (V4L2_FWNODE_BUS_TYPE_PARALLEL) so that the driver has its input
> configured to DSI and the display pipeline can probe correctly.

Don't people find it odd that this is setting the bus-type to "parallel"
(5) for the device to use DSI? Instead of "MIPI CSI-2 D-PHY" (4) or even
"MIPI CSI-2 C-PHY" (1) which is specified in the binding? It's completely
backwards.

Would it be possible to fix the binding and driver at this point?


Thanks
ChenYu

> While at it, also set the data-lanes property that was also introduced
> in that same commit, so that we don't rely on the default value.
>
> Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>
> ---
> v1: https://lore.kernel.org/all/20220120224204.773117-1-nfraprado@collabora.com
>
> Changes in v2:
> - (thanks Rob) Use proper format when refering to commit in commit
>   message as pointed out by checkpatch
>
>  arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> index 8f7bf33f607d..e8f133dc96b9 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
> @@ -171,6 +171,8 @@ port@0 {
>
>                         anx7625_in: endpoint {
>                                 remote-endpoint = <&dsi_out>;
> +                               bus-type = <5>;
> +                               data-lanes = <0 1 2 3>;
>                         };
>                 };
>
> --
> 2.35.1
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek