1. Patchew
  2. linux
  3. View series

[PATCH] drm: adv7511: override i2c address of cec before accessing it

Antonio Borneo posted 1 patch 4 years, 6 months ago
There is a newer version of this series
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
[PATCH] drm: adv7511: override i2c address of cec before accessing it
Posted by Antonio Borneo 4 years, 6 months ago 
Commit 680532c50bca ("drm: adv7511: Add support for
i2c_new_secondary_device") allows a device tree node to override
the default addresses of the secondary i2c devices. This is useful
for solving address conflicts on the i2c bus.

In adv7511_init_cec_regmap() the new i2c address of cec device is
read from device tree and immediately accessed, well before it is
written in the proper register to override the default address.
This can cause an i2c error during probe and a consequent probe
failure.

Once the new i2c address is read from the device tree, override
the default address before any attempt to access the cec.

Tested with adv7533 and stm32mp157f.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes: 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device")
---
To: Andrzej Hajda <a.hajda@samsung.com>
To: Neil Armstrong <narmstrong@baylibre.com>
To: Robert Foss <robert.foss@linaro.org>
To: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
To: Jonas Karlman <jonas@kwiboo.se>
To: Jernej Skrabec <jernej.skrabec@gmail.com>
To: David Airlie <airlied@linux.ie>
To: Daniel Vetter <daniel@ffwll.ch>
To: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 76555ae64e9c..629e05286fd9 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -1048,6 +1048,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
 						ADV7511_CEC_I2C_ADDR_DEFAULT);
 	if (IS_ERR(adv->i2c_cec))
 		return PTR_ERR(adv->i2c_cec);
+
+	regmap_write(adv->regmap, ADV7511_REG_CEC_I2C_ADDR,
+		     adv->i2c_cec->addr << 1);
+
 	i2c_set_clientdata(adv->i2c_cec, adv);
 
 	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
@@ -1252,9 +1256,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	if (ret)
 		goto err_i2c_unregister_packet;
 
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
-		     adv7511->i2c_cec->addr << 1);
-
 	INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
 
 	if (i2c->irq) {

base-commit: fc74881c28d314b10efac016ef49df4ff40b8b97
-- 
2.34.1
Re: [PATCH] drm: adv7511: override i2c address of cec before accessing it
Posted by Kieran Bingham 4 years, 6 months ago 
Hi Antonio,

Quoting Antonio Borneo (2021-12-18 18:28:04)
> Commit 680532c50bca ("drm: adv7511: Add support for
> i2c_new_secondary_device") allows a device tree node to override
> the default addresses of the secondary i2c devices. This is useful
> for solving address conflicts on the i2c bus.
> 
> In adv7511_init_cec_regmap() the new i2c address of cec device is
> read from device tree and immediately accessed, well before it is
> written in the proper register to override the default address.
> This can cause an i2c error during probe and a consequent probe
> failure.

Ouch, it does seem that way. I guess no one has used the CEC for quite
some time, as it must have been like this for a while?

> Once the new i2c address is read from the device tree, override
> the default address before any attempt to access the cec.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> Tested with adv7533 and stm32mp157f.
> 
> Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
> Fixes: 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device")
> ---
> To: Andrzej Hajda <a.hajda@samsung.com>
> To: Neil Armstrong <narmstrong@baylibre.com>
> To: Robert Foss <robert.foss@linaro.org>
> To: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> To: Jonas Karlman <jonas@kwiboo.se>
> To: Jernej Skrabec <jernej.skrabec@gmail.com>
> To: David Airlie <airlied@linux.ie>
> To: Daniel Vetter <daniel@ffwll.ch>
> To: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> To: dri-devel@lists.freedesktop.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> ---
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 76555ae64e9c..629e05286fd9 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1048,6 +1048,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
>                                                 ADV7511_CEC_I2C_ADDR_DEFAULT);
>         if (IS_ERR(adv->i2c_cec))
>                 return PTR_ERR(adv->i2c_cec);
> +
> +       regmap_write(adv->regmap, ADV7511_REG_CEC_I2C_ADDR,
> +                    adv->i2c_cec->addr << 1);
> +
>         i2c_set_clientdata(adv->i2c_cec, adv);
>  
>         adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
> @@ -1252,9 +1256,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
>         if (ret)
>                 goto err_i2c_unregister_packet;
>  
> -       regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
> -                    adv7511->i2c_cec->addr << 1);
> -
>         INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
>  
>         if (i2c->irq) {
> 
> base-commit: fc74881c28d314b10efac016ef49df4ff40b8b97
> -- 
> 2.34.1
>
Re: [PATCH] drm: adv7511: override i2c address of cec before accessing it
Posted by Antonio Borneo 4 years, 6 months ago 
On Mon, 2021-12-20 at 14:54 +0000, Kieran Bingham wrote:
> Hi Antonio,
> 
> Quoting Antonio Borneo (2021-12-18 18:28:04)
> > Commit 680532c50bca ("drm: adv7511: Add support for
> > i2c_new_secondary_device") allows a device tree node to override
> > the default addresses of the secondary i2c devices. This is useful
> > for solving address conflicts on the i2c bus.
> > 
> > In adv7511_init_cec_regmap() the new i2c address of cec device is
> > read from device tree and immediately accessed, well before it is
> > written in the proper register to override the default address.
> > This can cause an i2c error during probe and a consequent probe
> > failure.
> 
> Ouch, it does seem that way. I guess no one has used the CEC for
> quite
> some time, as it must have been like this for a while?

Using the default i2c address for cec works without problem; apparently
everyone is happy with such default. The issue appears only when you
have to override the default cec address.
The commit 680532c50bca landed in v4.18.

> > Once the new i2c address is read from the device tree, override
> > the default address before any attempt to access the cec.
> 
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Thanks!
Antonio

> > Tested with adv7533 and stm32mp157f.
> > 
> > Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
> > Fixes: 680532c50bca ("drm: adv7511: Add support for
> > i2c_new_secondary_device")
> > ---
> > To: Andrzej Hajda <a.hajda@samsung.com>
> > To: Neil Armstrong <narmstrong@baylibre.com>
> > To: Robert Foss <robert.foss@linaro.org>
> > To: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> > To: Jonas Karlman <jonas@kwiboo.se>
> > To: Jernej Skrabec <jernej.skrabec@gmail.com>
> > To: David Airlie <airlied@linux.ie>
> > To: Daniel Vetter <daniel@ffwll.ch>
> > To: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > To: dri-devel@lists.freedesktop.org
> > Cc: linux-kernel@vger.kernel.org
> > Cc: linux-stm32@st-md-mailman.stormreply.com
> > ---
> >  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 7 ++++---
> >  1 file changed, 4 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > index 76555ae64e9c..629e05286fd9 100644
> > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > @@ -1048,6 +1048,10 @@ static int adv7511_init_cec_regmap(struct
> > adv7511 *adv)
> >                                                
> > ADV7511_CEC_I2C_ADDR_DEFAULT);
> >         if (IS_ERR(adv->i2c_cec))
> >                 return PTR_ERR(adv->i2c_cec);
> > +
> > +       regmap_write(adv->regmap, ADV7511_REG_CEC_I2C_ADDR,
> > +                    adv->i2c_cec->addr << 1);
> > +
> >         i2c_set_clientdata(adv->i2c_cec, adv);
> >  
> >         adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
> > @@ -1252,9 +1256,6 @@ static int adv7511_probe(struct i2c_client
> > *i2c, const struct i2c_device_id *id)
> >         if (ret)
> >                 goto err_i2c_unregister_packet;
> >  
> > -       regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
> > -                    adv7511->i2c_cec->addr << 1);
> > -
> >         INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
> >  
> >         if (i2c->irq) {
> > 
> > base-commit: fc74881c28d314b10efac016ef49df4ff40b8b97
> > -- 
> > 2.34.1
> >
Re: [PATCH] drm: adv7511: override i2c address of cec before accessing it
Posted by Kieran Bingham 4 years, 6 months ago 
Quoting Antonio Borneo (2021-12-20 15:53:12)
> On Mon, 2021-12-20 at 14:54 +0000, Kieran Bingham wrote:
> > Hi Antonio,
> > 
> > Quoting Antonio Borneo (2021-12-18 18:28:04)
> > > Commit 680532c50bca ("drm: adv7511: Add support for
> > > i2c_new_secondary_device") allows a device tree node to override
> > > the default addresses of the secondary i2c devices. This is useful
> > > for solving address conflicts on the i2c bus.
> > > 
> > > In adv7511_init_cec_regmap() the new i2c address of cec device is
> > > read from device tree and immediately accessed, well before it is
> > > written in the proper register to override the default address.
> > > This can cause an i2c error during probe and a consequent probe
> > > failure.
> > 
> > Ouch, it does seem that way. I guess no one has used the CEC for
> > quite
> > some time, as it must have been like this for a while?
> 
> Using the default i2c address for cec works without problem; apparently
> everyone is happy with such default. The issue appears only when you
> have to override the default cec address.
> The commit 680532c50bca landed in v4.18.

Ok, phew - so the 'normal' case still worked. That makes sense.

Sorry for getting it wrong, and I hope it didn't take too long to find
and fix. I'm sure we'll see it percolate down the stable trees once
integrated.

--
Kieran

> > > Once the new i2c address is read from the device tree, override
> > > the default address before any attempt to access the cec.
> > 
> > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> 
> Thanks!
> Antonio
> 
> > > Tested with adv7533 and stm32mp157f.
> > > 
> > > Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
> > > Fixes: 680532c50bca ("drm: adv7511: Add support for
> > > i2c_new_secondary_device")
> > > ---
> > > To: Andrzej Hajda <a.hajda@samsung.com>
> > > To: Neil Armstrong <narmstrong@baylibre.com>
> > > To: Robert Foss <robert.foss@linaro.org>
> > > To: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> > > To: Jonas Karlman <jonas@kwiboo.se>
> > > To: Jernej Skrabec <jernej.skrabec@gmail.com>
> > > To: David Airlie <airlied@linux.ie>
> > > To: Daniel Vetter <daniel@ffwll.ch>
> > > To: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > > To: dri-devel@lists.freedesktop.org
> > > Cc: linux-kernel@vger.kernel.org
> > > Cc: linux-stm32@st-md-mailman.stormreply.com
> > > ---
> > >  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 7 ++++---
> > >  1 file changed, 4 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > > b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > > index 76555ae64e9c..629e05286fd9 100644
> > > --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > > +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> > > @@ -1048,6 +1048,10 @@ static int adv7511_init_cec_regmap(struct
> > > adv7511 *adv)
> > >                                                
> > > ADV7511_CEC_I2C_ADDR_DEFAULT);
> > >         if (IS_ERR(adv->i2c_cec))
> > >                 return PTR_ERR(adv->i2c_cec);
> > > +
> > > +       regmap_write(adv->regmap, ADV7511_REG_CEC_I2C_ADDR,
> > > +                    adv->i2c_cec->addr << 1);
> > > +
> > >         i2c_set_clientdata(adv->i2c_cec, adv);
> > >  
> > >         adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
> > > @@ -1252,9 +1256,6 @@ static int adv7511_probe(struct i2c_client
> > > *i2c, const struct i2c_device_id *id)
> > >         if (ret)
> > >                 goto err_i2c_unregister_packet;
> > >  
> > > -       regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
> > > -                    adv7511->i2c_cec->addr << 1);
> > > -
> > >         INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
> > >  
> > >         if (i2c->irq) {
> > > 
> > > base-commit: fc74881c28d314b10efac016ef49df4ff40b8b97
> > > -- 
> > > 2.34.1
> > > 
>
[PATCH RESEND] drm: adv7511: override i2c address of cec before accessing it
Posted by Antonio Borneo 4 years ago 
Commit 680532c50bca ("drm: adv7511: Add support for
i2c_new_secondary_device") allows a device tree node to override
the default addresses of the secondary i2c devices. This is useful
for solving address conflicts on the i2c bus.

In adv7511_init_cec_regmap() the new i2c address of cec device is
read from device tree and immediately accessed, well before it is
written in the proper register to override the default address.
This can cause an i2c error during probe and a consequent probe
failure.

Once the new i2c address is read from the device tree, override
the default address before any attempt to access the cec.

Tested with adv7533 and stm32mp157f.

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Fixes: 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

---

This patch got somehow lost, I'm resending it.
Added reviewed by Kieran Bingham.
Rebased on drm-misc-next.

---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 5bb9300040dd..074c2e650cae 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -1065,6 +1065,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
 						ADV7511_CEC_I2C_ADDR_DEFAULT);
 	if (IS_ERR(adv->i2c_cec))
 		return PTR_ERR(adv->i2c_cec);
+
+	regmap_write(adv->regmap, ADV7511_REG_CEC_I2C_ADDR,
+		     adv->i2c_cec->addr << 1);
+
 	i2c_set_clientdata(adv->i2c_cec, adv);
 
 	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
@@ -1271,9 +1275,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	if (ret)
 		goto err_i2c_unregister_packet;
 
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
-		     adv7511->i2c_cec->addr << 1);
-
 	INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
 
 	if (i2c->irq) {

base-commit: dfa687bffc8a4a21ed929c7dececf01b8f1f52ee
-- 
2.36.1
Re: [PATCH RESEND] drm: adv7511: override i2c address of cec before accessing it
Posted by Robert Foss 4 years ago 
On Tue, 7 Jun 2022 at 23:32, Antonio Borneo <antonio.borneo@foss.st.com> wrote:
>
> Commit 680532c50bca ("drm: adv7511: Add support for
> i2c_new_secondary_device") allows a device tree node to override
> the default addresses of the secondary i2c devices. This is useful
> for solving address conflicts on the i2c bus.
>
> In adv7511_init_cec_regmap() the new i2c address of cec device is
> read from device tree and immediately accessed, well before it is
> written in the proper register to override the default address.
> This can cause an i2c error during probe and a consequent probe
> failure.
>
> Once the new i2c address is read from the device tree, override
> the default address before any attempt to access the cec.
>
> Tested with adv7533 and stm32mp157f.
>
> Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
> Fixes: 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device")
> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
>
> ---
>
> This patch got somehow lost, I'm resending it.
> Added reviewed by Kieran Bingham.
> Rebased on drm-misc-next.
>
> ---
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index 5bb9300040dd..074c2e650cae 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -1065,6 +1065,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
>                                                 ADV7511_CEC_I2C_ADDR_DEFAULT);
>         if (IS_ERR(adv->i2c_cec))
>                 return PTR_ERR(adv->i2c_cec);
> +
> +       regmap_write(adv->regmap, ADV7511_REG_CEC_I2C_ADDR,
> +                    adv->i2c_cec->addr << 1);
> +
>         i2c_set_clientdata(adv->i2c_cec, adv);
>
>         adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
> @@ -1271,9 +1275,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
>         if (ret)
>                 goto err_i2c_unregister_packet;
>
> -       regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
> -                    adv7511->i2c_cec->addr << 1);
> -
>         INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
>
>         if (i2c->irq) {
>
> base-commit: dfa687bffc8a4a21ed929c7dececf01b8f1f52ee
> --
> 2.36.1
>

Applied to drm-misc-next.

Patchew 2.1-devel-ea86937

© 2016 - 2026 Red Hat, Inc.