drivers/memory/mtk-smi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
We add the ostd setting for mt8195. It introduces a abort for the
previous SoC which doesn't have ostd setting. This is the log:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000080
...
pc : mtk_smi_larb_config_port_gen2_general+0x64/0x130
lr : mtk_smi_larb_resume+0x54/0x98
...
Call trace:
mtk_smi_larb_config_port_gen2_general+0x64/0x130
pm_generic_runtime_resume+0x2c/0x48
__genpd_runtime_resume+0x30/0xa8
genpd_runtime_resume+0x94/0x2c8
__rpm_callback+0x44/0x150
rpm_callback+0x6c/0x78
rpm_resume+0x310/0x558
__pm_runtime_resume+0x3c/0x88
In the code: larbostd = larb->larb_gen->ostd[larb->larbid],
if "larb->larb_gen->ostd" is null, the "larbostd" is the offset, it is
also a valid value, thus, use the larb->larb_gen->ostd as the condition
inside the "for" loop.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
Hi Krzysztof,
Could you help review and conside this as a fix for the mt8195 patchset?
The mt8195 patchset are not in mainline, thus, I don't know its sha-id,
and don't add Fixes tag.
Thanks
---
drivers/memory/mtk-smi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index b883dcc0bbfa..0262a59a2d6e 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -257,7 +257,7 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_SW_FLAG))
writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + SMI_LARB_SW_FLAG);
- for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && !!larbostd[i]; i++)
+ for (i = 0; i < SMI_LARB_PORT_NR_MAX && larb->larb_gen->ostd && !!larbostd[i]; i++)
writel_relaxed(larbostd[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
--
2.18.0
On Thu, Oct 28, 2021 at 1:51 PM Yong Wu <yong.wu@mediatek.com> wrote: > > We add the ostd setting for mt8195. It introduces a abort for the > previous SoC which doesn't have ostd setting. This is the log: > > Unable to handle kernel NULL pointer dereference at virtual address > 0000000000000080 > ... > pc : mtk_smi_larb_config_port_gen2_general+0x64/0x130 > lr : mtk_smi_larb_resume+0x54/0x98 > ... > Call trace: > mtk_smi_larb_config_port_gen2_general+0x64/0x130 > pm_generic_runtime_resume+0x2c/0x48 > __genpd_runtime_resume+0x30/0xa8 > genpd_runtime_resume+0x94/0x2c8 > __rpm_callback+0x44/0x150 > rpm_callback+0x6c/0x78 > rpm_resume+0x310/0x558 > __pm_runtime_resume+0x3c/0x88 > > In the code: larbostd = larb->larb_gen->ostd[larb->larbid], > if "larb->larb_gen->ostd" is null, the "larbostd" is the offset, it is > also a valid value, thus, use the larb->larb_gen->ostd as the condition > inside the "for" loop. > > Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> After applying this patch, mt8183 is no longer crashing. > --- > Hi Krzysztof, > Could you help review and conside this as a fix for the mt8195 patchset? > The mt8195 patchset are not in mainline, thus, I don't know its sha-id, > and don't add Fixes tag. > Thanks > --- > drivers/memory/mtk-smi.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c > index b883dcc0bbfa..0262a59a2d6e 100644 > --- a/drivers/memory/mtk-smi.c > +++ b/drivers/memory/mtk-smi.c > @@ -257,7 +257,7 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev) > if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_SW_FLAG)) > writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + SMI_LARB_SW_FLAG); > > - for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && !!larbostd[i]; i++) > + for (i = 0; i < SMI_LARB_PORT_NR_MAX && larb->larb_gen->ostd && !!larbostd[i]; i++) > writel_relaxed(larbostd[i], larb->base + SMI_LARB_OSTDL_PORTx(i)); > > for_each_set_bit(i, (unsigned long *)larb->mmu, 32) { > -- > 2.18.0 > > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek
On 28/10/2021 07:50, Yong Wu wrote: > We add the ostd setting for mt8195. It introduces a abort for the > previous SoC which doesn't have ostd setting. This is the log: > > Unable to handle kernel NULL pointer dereference at virtual address > 0000000000000080 > ... > pc : mtk_smi_larb_config_port_gen2_general+0x64/0x130 > lr : mtk_smi_larb_resume+0x54/0x98 > ... > Call trace: > mtk_smi_larb_config_port_gen2_general+0x64/0x130 > pm_generic_runtime_resume+0x2c/0x48 > __genpd_runtime_resume+0x30/0xa8 > genpd_runtime_resume+0x94/0x2c8 > __rpm_callback+0x44/0x150 > rpm_callback+0x6c/0x78 > rpm_resume+0x310/0x558 > __pm_runtime_resume+0x3c/0x88 > > In the code: larbostd = larb->larb_gen->ostd[larb->larbid], > if "larb->larb_gen->ostd" is null, the "larbostd" is the offset, it is > also a valid value, thus, use the larb->larb_gen->ostd as the condition > inside the "for" loop. You need to write more clearly, what you are fixing here. > > Signed-off-by: Yong Wu <yong.wu@mediatek.com> > --- > Hi Krzysztof, > Could you help review and conside this as a fix for the mt8195 patchset? > The mt8195 patchset are not in mainline, thus, I don't know its sha-id, > and don't add Fixes tag. > Thanks > --- > drivers/memory/mtk-smi.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c > index b883dcc0bbfa..0262a59a2d6e 100644 > --- a/drivers/memory/mtk-smi.c > +++ b/drivers/memory/mtk-smi.c > @@ -257,7 +257,7 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev) > if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_SW_FLAG)) > writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + SMI_LARB_SW_FLAG); > > - for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && !!larbostd[i]; i++) > + for (i = 0; i < SMI_LARB_PORT_NR_MAX && larb->larb_gen->ostd && !!larbostd[i]; i++) > writel_relaxed(larbostd[i], larb->base + SMI_LARB_OSTDL_PORTx(i)); The code does not look good. You have already a dereference at line 244: const u8 *larbostd = larb->larb_gen->ostd[larb->larbid]; You are not fixing the NULL pointer dereference. > > for_each_set_bit(i, (unsigned long *)larb->mmu, 32) { > Best regards, Krzysztof
On Fri, 2021-10-29 at 19:35 +0200, Krzysztof Kozlowski wrote: > On 28/10/2021 07:50, Yong Wu wrote: > > We add the ostd setting for mt8195. It introduces a abort for the > > previous SoC which doesn't have ostd setting. This is the log: > > > > Unable to handle kernel NULL pointer dereference at virtual address > > 0000000000000080 > > ... > > pc : mtk_smi_larb_config_port_gen2_general+0x64/0x130 > > lr : mtk_smi_larb_resume+0x54/0x98 > > ... > > Call trace: > > mtk_smi_larb_config_port_gen2_general+0x64/0x130 > > pm_generic_runtime_resume+0x2c/0x48 > > __genpd_runtime_resume+0x30/0xa8 > > genpd_runtime_resume+0x94/0x2c8 > > __rpm_callback+0x44/0x150 > > rpm_callback+0x6c/0x78 > > rpm_resume+0x310/0x558 > > __pm_runtime_resume+0x3c/0x88 > > > > In the code: larbostd = larb->larb_gen->ostd[larb->larbid], > > if "larb->larb_gen->ostd" is null, the "larbostd" is the offset, it > > is > > also a valid value, thus, use the larb->larb_gen->ostd as the > > condition > > inside the "for" loop. > > You need to write more clearly, what you are fixing here. > > > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com> > > --- > > Hi Krzysztof, > > Could you help review and conside this as a fix for the mt8195 > > patchset? > > The mt8195 patchset are not in mainline, thus, I don't know its > > sha-id, > > and don't add Fixes tag. > > Thanks > > --- > > drivers/memory/mtk-smi.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c > > index b883dcc0bbfa..0262a59a2d6e 100644 > > --- a/drivers/memory/mtk-smi.c > > +++ b/drivers/memory/mtk-smi.c > > @@ -257,7 +257,7 @@ static void > > mtk_smi_larb_config_port_gen2_general(struct device *dev) > > if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_SW_FLAG)) > > writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + > > SMI_LARB_SW_FLAG); > > > > - for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && > > !!larbostd[i]; i++) > > + for (i = 0; i < SMI_LARB_PORT_NR_MAX && larb->larb_gen->ostd && > > !!larbostd[i]; i++) > > writel_relaxed(larbostd[i], larb->base + > > SMI_LARB_OSTDL_PORTx(i)); > > The code does not look good. You have already a dereference at line > 244: > > const u8 *larbostd = larb->larb_gen->ostd[larb->larbid]; if larb->larb_gen->ostd is null, larbostd is the offset, e.g. 0x80 in the log above. thus, we can not use "larbostd[i]" in the "for" loop. sorry for the unreadable. In this case, is the change ok? or like this: -const u8 *larbostd = larb->larb_gen->ostd[larb->larbid]; +const u8 *larbostd = larb->larb_gen->ostd ? larb->larb_gen-ostd[larb- >larbid] : NULL; or add a explicit "if": if (larb->larb_gen->ostd) larbostd = xxx. Which one do you prefer? Thanks. > > You are not fixing the NULL pointer dereference. > > > > > for_each_set_bit(i, (unsigned long *)larb->mmu, 32) { > > > > > Best regards, > Krzysztof
On 01/11/2021 07:09, Yong Wu wrote: > On Fri, 2021-10-29 at 19:35 +0200, Krzysztof Kozlowski wrote: >> On 28/10/2021 07:50, Yong Wu wrote: >>> We add the ostd setting for mt8195. It introduces a abort for the >>> previous SoC which doesn't have ostd setting. This is the log: >>> >>> Unable to handle kernel NULL pointer dereference at virtual address >>> 0000000000000080 >>> ... >>> pc : mtk_smi_larb_config_port_gen2_general+0x64/0x130 >>> lr : mtk_smi_larb_resume+0x54/0x98 >>> ... >>> Call trace: >>> mtk_smi_larb_config_port_gen2_general+0x64/0x130 >>> pm_generic_runtime_resume+0x2c/0x48 >>> __genpd_runtime_resume+0x30/0xa8 >>> genpd_runtime_resume+0x94/0x2c8 >>> __rpm_callback+0x44/0x150 >>> rpm_callback+0x6c/0x78 >>> rpm_resume+0x310/0x558 >>> __pm_runtime_resume+0x3c/0x88 >>> >>> In the code: larbostd = larb->larb_gen->ostd[larb->larbid], >>> if "larb->larb_gen->ostd" is null, the "larbostd" is the offset, it >>> is >>> also a valid value, thus, use the larb->larb_gen->ostd as the >>> condition >>> inside the "for" loop. >> >> You need to write more clearly, what you are fixing here. >> >>> >>> Signed-off-by: Yong Wu <yong.wu@mediatek.com> >>> --- >>> Hi Krzysztof, >>> Could you help review and conside this as a fix for the mt8195 >>> patchset? >>> The mt8195 patchset are not in mainline, thus, I don't know its >>> sha-id, >>> and don't add Fixes tag. >>> Thanks >>> --- >>> drivers/memory/mtk-smi.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c >>> index b883dcc0bbfa..0262a59a2d6e 100644 >>> --- a/drivers/memory/mtk-smi.c >>> +++ b/drivers/memory/mtk-smi.c >>> @@ -257,7 +257,7 @@ static void >>> mtk_smi_larb_config_port_gen2_general(struct device *dev) >>> if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_SW_FLAG)) >>> writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + >>> SMI_LARB_SW_FLAG); >>> >>> - for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && >>> !!larbostd[i]; i++) >>> + for (i = 0; i < SMI_LARB_PORT_NR_MAX && larb->larb_gen->ostd && >>> !!larbostd[i]; i++) >>> writel_relaxed(larbostd[i], larb->base + >>> SMI_LARB_OSTDL_PORTx(i)); >> >> The code does not look good. You have already a dereference at line >> 244: >> >> const u8 *larbostd = larb->larb_gen->ostd[larb->larbid]; > > if larb->larb_gen->ostd is null, larbostd is the offset, e.g. 0x80 in > the log above. thus, we can not use "larbostd[i]" in the "for" loop. > > sorry for the unreadable. In this case, is the change ok? No, it's ok, I did not check the type of ostd and it's confusing a bit that it is defined as a pointer to an array but you actually use it as array of pointers to 32-elemenet arrays... Anyway I was mistaken and there will be indeed no dereference at the assignment, but for code clarity I would still prefer to do the check earlier, so: > > or like this: > > -const u8 *larbostd = larb->larb_gen->ostd[larb->larbid]; > +const u8 *larbostd = larb->larb_gen->ostd ? larb->larb_gen-ostd[larb- >> larbid] : NULL; Although I think now the proper type should be explicit. mtk_smi_larb_mt8195_ostd is an 28-element array of SMI_LARB_PORT_NR_MAX-element u8 arrays, therefore struct mtk_smi_larb_gen should be: const u8 (*ostd)[][SMI_LARB_PORT_NR_MAX]; Right? Best regards, Krzysztof
On Mon, 2021-11-01 at 09:45 +0100, Krzysztof Kozlowski wrote: > On 01/11/2021 07:09, Yong Wu wrote: > > On Fri, 2021-10-29 at 19:35 +0200, Krzysztof Kozlowski wrote: > > > On 28/10/2021 07:50, Yong Wu wrote: > > > > We add the ostd setting for mt8195. It introduces a abort for > > > > the > > > > previous SoC which doesn't have ostd setting. This is the log: > > > > > > > > Unable to handle kernel NULL pointer dereference at virtual > > > > address > > > > 0000000000000080 > > > > ... > > > > pc : mtk_smi_larb_config_port_gen2_general+0x64/0x130 > > > > lr : mtk_smi_larb_resume+0x54/0x98 > > > > ... > > > > Call trace: > > > > mtk_smi_larb_config_port_gen2_general+0x64/0x130 > > > > pm_generic_runtime_resume+0x2c/0x48 > > > > __genpd_runtime_resume+0x30/0xa8 > > > > genpd_runtime_resume+0x94/0x2c8 > > > > __rpm_callback+0x44/0x150 > > > > rpm_callback+0x6c/0x78 > > > > rpm_resume+0x310/0x558 > > > > __pm_runtime_resume+0x3c/0x88 > > > > > > > > In the code: larbostd = larb->larb_gen->ostd[larb->larbid], > > > > if "larb->larb_gen->ostd" is null, the "larbostd" is the > > > > offset, it > > > > is > > > > also a valid value, thus, use the larb->larb_gen->ostd as the > > > > condition > > > > inside the "for" loop. > > > > > > You need to write more clearly, what you are fixing here. > > > > > > > > > > > Signed-off-by: Yong Wu <yong.wu@mediatek.com> > > > > --- > > > > Hi Krzysztof, > > > > Could you help review and conside this as a fix for the mt8195 > > > > patchset? > > > > The mt8195 patchset are not in mainline, thus, I don't know its > > > > sha-id, > > > > and don't add Fixes tag. > > > > Thanks > > > > --- > > > > drivers/memory/mtk-smi.c | 2 +- > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk- > > > > smi.c > > > > index b883dcc0bbfa..0262a59a2d6e 100644 > > > > --- a/drivers/memory/mtk-smi.c > > > > +++ b/drivers/memory/mtk-smi.c > > > > @@ -257,7 +257,7 @@ static void > > > > mtk_smi_larb_config_port_gen2_general(struct device *dev) > > > > if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_SW_FLAG)) > > > > writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + > > > > SMI_LARB_SW_FLAG); > > > > > > > > - for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && > > > > !!larbostd[i]; i++) > > > > + for (i = 0; i < SMI_LARB_PORT_NR_MAX && larb->larb_gen- > > > > >ostd && > > > > !!larbostd[i]; i++) > > > > writel_relaxed(larbostd[i], larb->base + > > > > SMI_LARB_OSTDL_PORTx(i)); > > > > > > The code does not look good. You have already a dereference at > > > line > > > 244: > > > > > > const u8 *larbostd = larb->larb_gen->ostd[larb->larbid]; > > > > if larb->larb_gen->ostd is null, larbostd is the offset, e.g. 0x80 > > in > > the log above. thus, we can not use "larbostd[i]" in the "for" > > loop. > > > > sorry for the unreadable. In this case, is the change ok? > > No, it's ok, I did not check the type of ostd and it's confusing a > bit > that it is defined as a pointer to an array but you actually use it > as > array of pointers to 32-elemenet arrays... Anyway I was mistaken and > there will be indeed no dereference at the assignment, but for code > clarity I would still prefer to do the check earlier, so: > > > > > or like this: > > > > -const u8 *larbostd = larb->larb_gen->ostd[larb->larbid]; > > +const u8 *larbostd = larb->larb_gen->ostd ? larb->larb_gen- > > ostd[larb- > > > larbid] : NULL; > > Although I think now the proper type should be explicit. > mtk_smi_larb_mt8195_ostd is an 28-element array of > SMI_LARB_PORT_NR_MAX-element u8 arrays, therefore struct > mtk_smi_larb_gen should be: > const u8 (*ostd)[][SMI_LARB_PORT_NR_MAX]; mt8195_ostd only is a 2 dimensional array, static const u8 mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX]; If using this, it will cause build fail: .../drivers/memory/mtk-smi.c:359:23: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] .ostd = mtk_smi_larb_mt8195_ostd, ^~~~~~~~~~~~~~~~~~~~~~~~ More background about this 2 dimensional array: The platform have many larbs(up to MTK_LARB_NR_MAX), each a larb have many ports(up to SMI_LARB_PORT_NR_MAX). In the function(*_config_port_gen2_general), we will update the value for each a port inside a larb, thus we need a pointer point to the line of that larb. If I miss something, please tell me. or how to manage this will be better. Thanks. > > Right? > > > Best regards, > Krzysztof
© 2016 - 2024 Red Hat, Inc.