drivers/cpufreq/amd-pstate-ut.c | 5 +++++ 1 file changed, 5 insertions(+)
The crash issue may occur when modprobe amd_pstate_ut on intel platform.
amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success!
amd_pstate_ut: 2 amd_pstate_ut_check_enabled success!
BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 0 PID: 20300 Comm: modprobe
Kdump: loaded Tainted: G O 6.6.0-0010.rc1.ctl4.x86_64 #1
Hardware name: FiberHome R2200 V5/Xeon Boards, BIOS 3.1a 02/24/2020
RIP: 0010:amd_pstate_ut_check_perf+0x141/0x280 [amd_pstate_ut]
Call Trace:
<TASK>
amd_pstate_ut_init+0x1b/0xff0 [amd_pstate_ut]
? __pfx_amd_pstate_ut_init+0x10/0x10 [amd_pstate_ut]
do_one_initcall+0x42/0x2e0
? kmalloc_trace+0x26/0x90
do_init_module+0x60/0x240
__se_sys_init_module+0x185/0x1c0
do_syscall_64+0x62/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Add state detection to amd pstate driver to prevent amd_pstate_ut driver
from testing on non-AMD platforms.
Fixes: 14eb1c96e3a3 ("cpufreq: amd-pstate: Add test module for amd-pstate driver")
Suggested-by: Li Xiong <xiongl24@chinatelecom.cn>
Suggested-by: Xibo Wang <wangxb12@chinatelecom.cn>
Signed-off-by: Qianheng Peng <pengqh1@chinatelecom.cn>
---
v3:
- Remove unnecessary NULL check
- Add detection to driver state instead of driver name
v2: https://lore.kernel.org/all/1784108124-19988-1-git-send-email-pengqh1@chinatelecom.cn
- Print policy->cpu instead of policy->kboj.name
- Add cpufreq driver name detection to amd_pstate_ut
v1: https://lore.kernel.org/all/1784015941-26535-1-git-send-email-pengqh1@chinatelecom.cn
---
drivers/cpufreq/amd-pstate-ut.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/cpufreq/amd-pstate-ut.c b/drivers/cpufreq/amd-pstate-ut.c
index 735b29f..2142838 100644
--- a/drivers/cpufreq/amd-pstate-ut.c
+++ b/drivers/cpufreq/amd-pstate-ut.c
@@ -560,6 +560,11 @@ static int amd_pstate_ut_check_freq_attrs(u32 index)
static int __init amd_pstate_ut_init(void)
{
u32 i = 0, arr_size = ARRAY_SIZE(amd_pstate_ut_cases);
+ enum amd_pstate_mode mode = amd_pstate_get_status();
+
+ /* don't test if no running amd-pstate driver */
+ if (mode == AMD_PSTATE_UNDEFINED || mode == AMD_PSTATE_DISABLE)
+ return -EOPNOTSUPP;
for (i = 0; i < arr_size; i++) {
int ret;
--
1.8.3.1
Hi Qianheng,
Thank you for your patience. It looks good to me overall, just a few
nits inline.
On 7/16/2026 4:51 PM, Qianheng Peng wrote:
> The crash issue may occur when modprobe amd_pstate_ut on intel platform.
>
It is better to start with:
"Loading the amd-pstate-ut module on a non-AMD platform triggers a NULL
pointer dereference:"
or
"A kernel NULL pointer dereference occurs when loading the amd-pstate-ut
module on a non-AMD (e.g. Intel) platform"
> amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success!
> amd_pstate_ut: 2 amd_pstate_ut_check_enabled success!
> BUG: kernel NULL pointer dereference, address: 0000000000000080
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD 0 P4D 0
> Oops: 0000 [#1] SMP NOPTI
> CPU: 0 PID: 20300 Comm: modprobe
> Kdump: loaded Tainted: G O 6.6.0-0010.rc1.ctl4.x86_64 #1
> Hardware name: FiberHome R2200 V5/Xeon Boards, BIOS 3.1a 02/24/2020
> RIP: 0010:amd_pstate_ut_check_perf+0x141/0x280 [amd_pstate_ut]
> Call Trace:
> <TASK>
> amd_pstate_ut_init+0x1b/0xff0 [amd_pstate_ut]
> ? __pfx_amd_pstate_ut_init+0x10/0x10 [amd_pstate_ut]
> do_one_initcall+0x42/0x2e0
> ? kmalloc_trace+0x26/0x90
> do_init_module+0x60/0x240
> __se_sys_init_module+0x185/0x1c0
> do_syscall_64+0x62/0x190
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
> </TASK>
>
> Add state detection to amd pstate driver to prevent amd_pstate_ut driver
This change fixes the amd-pstate-ut module rather than the amd-pstate
driver itself. Maybe something like:
"Add driver-state detection to the amd-pstate-ut module ..."
> from testing on non-AMD platforms.
It also covers the AMD_PSTATE_DISABLE case but not only non-AMD platforms.
And likewise, the subject may be changed as well, for example:
"cpufreq: amd-pstate-ut: Bail out early if the amd-pstate driver is not
running"
or
"cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not
active"
>
> Fixes: 14eb1c96e3a3 ("cpufreq: amd-pstate: Add test module for amd-pstate driver")
> Suggested-by: Li Xiong <xiongl24@chinatelecom.cn>
> Suggested-by: Xibo Wang <wangxb12@chinatelecom.cn>
> Signed-off-by: Qianheng Peng <pengqh1@chinatelecom.cn>
>
> ---
> v3:
> - Remove unnecessary NULL check
> - Add detection to driver state instead of driver name
>
> v2: https://lore.kernel.org/all/1784108124-19988-1-git-send-email-pengqh1@chinatelecom.cn
> - Print policy->cpu instead of policy->kboj.name
> - Add cpufreq driver name detection to amd_pstate_ut
>
> v1: https://lore.kernel.org/all/1784015941-26535-1-git-send-email-pengqh1@chinatelecom.cn
> ---
> drivers/cpufreq/amd-pstate-ut.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/cpufreq/amd-pstate-ut.c b/drivers/cpufreq/amd-pstate-ut.c
> index 735b29f..2142838 100644
> --- a/drivers/cpufreq/amd-pstate-ut.c
> +++ b/drivers/cpufreq/amd-pstate-ut.c
> @@ -560,6 +560,11 @@ static int amd_pstate_ut_check_freq_attrs(u32 index)
> static int __init amd_pstate_ut_init(void)
> {
> u32 i = 0, arr_size = ARRAY_SIZE(amd_pstate_ut_cases);
> + enum amd_pstate_mode mode = amd_pstate_get_status();
> +
> + /* don't test if no running amd-pstate driver */
How about:
"/* Do not run tests when the amd-pstate driver is not active. */"
> + if (mode == AMD_PSTATE_UNDEFINED || mode == AMD_PSTATE_DISABLE)
> + return -EOPNOTSUPP;
>
> for (i = 0; i < arr_size; i++) {
> int ret;
Anyone, please feel free to correct or ignore any of the nits above.
Regardless, the patch code looks good to me.
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
--
Thx and BRs,
Zhongqiu Han
© 2016 - 2026 Red Hat, Inc.