arch/riscv/configs/defconfig | 1 +- include/linux/timekeeper_internal.h | 16 +-- kernel/time/timekeeping.c | 108 +----------- lib/Kconfig.debug | 13 +- tools/testing/selftests/wireguard/qemu/debug.config | 1 +- 5 files changed, 3 insertions(+), 136 deletions(-)
The following commit has been merged into the timers/core branch of tip:
Commit-ID: d44d26987bb3df6d76556827097fc9ce17565cb8
Gitweb: https://git.kernel.org/tip/d44d26987bb3df6d76556827097fc9ce17565cb8
Author: Thomas Gleixner <tglx@linutronix.de>
AuthorDate: Thu, 31 Oct 2024 13:04:07 +01:00
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Sat, 02 Nov 2024 10:14:31 +01:00
timekeeping: Remove CONFIG_DEBUG_TIMEKEEPING
Since 135225a363ae timekeeping_cycles_to_ns() handles large offsets which
would lead to 64bit multiplication overflows correctly. It's also protected
against negative motion of the clocksource unconditionally, which was
exclusive to x86 before.
timekeeping_advance() handles large offsets already correctly.
That means the value of CONFIG_DEBUG_TIMEKEEPING which analyzed these cases
is very close to zero. Remove all of it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241031120328.536010148@linutronix.de
---
arch/riscv/configs/defconfig | 1 +-
include/linux/timekeeper_internal.h | 16 +--
kernel/time/timekeeping.c | 108 +-----------
lib/Kconfig.debug | 13 +-
tools/testing/selftests/wireguard/qemu/debug.config | 1 +-
5 files changed, 3 insertions(+), 136 deletions(-)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 2341393..26c01b9 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -301,7 +301,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_WQ_WATCHDOG=y
-CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h
index a3b6380..e39d4d5 100644
--- a/include/linux/timekeeper_internal.h
+++ b/include/linux/timekeeper_internal.h
@@ -76,9 +76,6 @@ struct tk_read_base {
* ntp shifted nano seconds.
* @ntp_err_mult: Multiplication factor for scaled math conversion
* @skip_second_overflow: Flag used to avoid updating NTP twice with same second
- * @last_warning: Warning ratelimiter (DEBUG_TIMEKEEPING)
- * @underflow_seen: Underflow warning flag (DEBUG_TIMEKEEPING)
- * @overflow_seen: Overflow warning flag (DEBUG_TIMEKEEPING)
*
* Note: For timespec(64) based interfaces wall_to_monotonic is what
* we need to add to xtime (or xtime corrected for sub jiffy times)
@@ -147,19 +144,6 @@ struct timekeeper {
u32 ntp_error_shift;
u32 ntp_err_mult;
u32 skip_second_overflow;
-
-#ifdef CONFIG_DEBUG_TIMEKEEPING
- long last_warning;
- /*
- * These simple flag variables are managed
- * without locks, which is racy, but they are
- * ok since we don't really care about being
- * super precise about how many events were
- * seen, just that a problem was observed.
- */
- int underflow_seen;
- int overflow_seen;
-#endif
};
#ifdef CONFIG_GENERIC_TIME_VSYSCALL
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 17cae88..d115ade 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -226,97 +226,6 @@ static inline u64 tk_clock_read(const struct tk_read_base *tkr)
return clock->read(clock);
}
-#ifdef CONFIG_DEBUG_TIMEKEEPING
-#define WARNING_FREQ (HZ*300) /* 5 minute rate-limiting */
-
-static void timekeeping_check_update(struct timekeeper *tk, u64 offset)
-{
-
- u64 max_cycles = tk->tkr_mono.clock->max_cycles;
- const char *name = tk->tkr_mono.clock->name;
-
- if (offset > max_cycles) {
- printk_deferred("WARNING: timekeeping: Cycle offset (%lld) is larger than allowed by the '%s' clock's max_cycles value (%lld): time overflow danger\n",
- offset, name, max_cycles);
- printk_deferred(" timekeeping: Your kernel is sick, but tries to cope by capping time updates\n");
- } else {
- if (offset > (max_cycles >> 1)) {
- printk_deferred("INFO: timekeeping: Cycle offset (%lld) is larger than the '%s' clock's 50%% safety margin (%lld)\n",
- offset, name, max_cycles >> 1);
- printk_deferred(" timekeeping: Your kernel is still fine, but is feeling a bit nervous\n");
- }
- }
-
- if (tk->underflow_seen) {
- if (jiffies - tk->last_warning > WARNING_FREQ) {
- printk_deferred("WARNING: Underflow in clocksource '%s' observed, time update ignored.\n", name);
- printk_deferred(" Please report this, consider using a different clocksource, if possible.\n");
- printk_deferred(" Your kernel is probably still fine.\n");
- tk->last_warning = jiffies;
- }
- tk->underflow_seen = 0;
- }
-
- if (tk->overflow_seen) {
- if (jiffies - tk->last_warning > WARNING_FREQ) {
- printk_deferred("WARNING: Overflow in clocksource '%s' observed, time update capped.\n", name);
- printk_deferred(" Please report this, consider using a different clocksource, if possible.\n");
- printk_deferred(" Your kernel is probably still fine.\n");
- tk->last_warning = jiffies;
- }
- tk->overflow_seen = 0;
- }
-}
-
-static inline u64 timekeeping_cycles_to_ns(const struct tk_read_base *tkr, u64 cycles);
-
-static inline u64 timekeeping_debug_get_ns(const struct tk_read_base *tkr)
-{
- struct timekeeper *tk = &tk_core.timekeeper;
- u64 now, last, mask, max, delta;
- unsigned int seq;
-
- /*
- * Since we're called holding a seqcount, the data may shift
- * under us while we're doing the calculation. This can cause
- * false positives, since we'd note a problem but throw the
- * results away. So nest another seqcount here to atomically
- * grab the points we are checking with.
- */
- do {
- seq = read_seqcount_begin(&tk_core.seq);
- now = tk_clock_read(tkr);
- last = tkr->cycle_last;
- mask = tkr->mask;
- max = tkr->clock->max_cycles;
- } while (read_seqcount_retry(&tk_core.seq, seq));
-
- delta = clocksource_delta(now, last, mask);
-
- /*
- * Try to catch underflows by checking if we are seeing small
- * mask-relative negative values.
- */
- if (unlikely((~delta & mask) < (mask >> 3)))
- tk->underflow_seen = 1;
-
- /* Check for multiplication overflows */
- if (unlikely(delta > max))
- tk->overflow_seen = 1;
-
- /* timekeeping_cycles_to_ns() handles both under and overflow */
- return timekeeping_cycles_to_ns(tkr, now);
-}
-#else
-static inline void timekeeping_check_update(struct timekeeper *tk, u64 offset)
-{
-}
-static inline u64 timekeeping_debug_get_ns(const struct tk_read_base *tkr)
-{
- BUG();
-}
-#endif
-
/**
* tk_setup_internals - Set up internals to use clocksource clock.
*
@@ -421,19 +330,11 @@ static inline u64 timekeeping_cycles_to_ns(const struct tk_read_base *tkr, u64 c
return ((delta * tkr->mult) + tkr->xtime_nsec) >> tkr->shift;
}
-static __always_inline u64 __timekeeping_get_ns(const struct tk_read_base *tkr)
+static __always_inline u64 timekeeping_get_ns(const struct tk_read_base *tkr)
{
return timekeeping_cycles_to_ns(tkr, tk_clock_read(tkr));
}
-static inline u64 timekeeping_get_ns(const struct tk_read_base *tkr)
-{
- if (IS_ENABLED(CONFIG_DEBUG_TIMEKEEPING))
- return timekeeping_debug_get_ns(tkr);
-
- return __timekeeping_get_ns(tkr);
-}
-
/**
* update_fast_timekeeper - Update the fast and NMI safe monotonic timekeeper.
* @tkr: Timekeeping readout base from which we take the update
@@ -477,7 +378,7 @@ static __always_inline u64 __ktime_get_fast_ns(struct tk_fast *tkf)
seq = raw_read_seqcount_latch(&tkf->seq);
tkr = tkf->base + (seq & 0x01);
now = ktime_to_ns(tkr->base);
- now += __timekeeping_get_ns(tkr);
+ now += timekeeping_get_ns(tkr);
} while (raw_read_seqcount_latch_retry(&tkf->seq, seq));
return now;
@@ -593,7 +494,7 @@ static __always_inline u64 __ktime_get_real_fast(struct tk_fast *tkf, u64 *mono)
tkr = tkf->base + (seq & 0x01);
basem = ktime_to_ns(tkr->base);
baser = ktime_to_ns(tkr->base_real);
- delta = __timekeeping_get_ns(tkr);
+ delta = timekeeping_get_ns(tkr);
} while (raw_read_seqcount_latch_retry(&tkf->seq, seq));
if (mono)
@@ -2333,9 +2234,6 @@ static bool timekeeping_advance(enum timekeeping_adv_mode mode)
if (offset < real_tk->cycle_interval && mode == TK_ADV_TICK)
return false;
- /* Do some additional sanity checking */
- timekeeping_check_update(tk, offset);
-
/*
* With NO_HZ we may have to accumulate many cycle_intervals
* (think "ticks") worth of time at once. To do this efficiently,
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 7315f64..14977b9 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1328,19 +1328,6 @@ config SCHEDSTATS
endmenu
-config DEBUG_TIMEKEEPING
- bool "Enable extra timekeeping sanity checking"
- help
- This option will enable additional timekeeping sanity checks
- which may be helpful when diagnosing issues where timekeeping
- problems are suspected.
-
- This may include checks in the timekeeping hotpaths, so this
- option may have a (very small) performance impact to some
- workloads.
-
- If unsure, say N.
-
config DEBUG_PREEMPT
bool "Debug preemptible kernel"
depends on DEBUG_KERNEL && PREEMPTION && TRACE_IRQFLAGS_SUPPORT
diff --git a/tools/testing/selftests/wireguard/qemu/debug.config b/tools/testing/selftests/wireguard/qemu/debug.config
index 9d17221..139fd9a 100644
--- a/tools/testing/selftests/wireguard/qemu/debug.config
+++ b/tools/testing/selftests/wireguard/qemu/debug.config
@@ -31,7 +31,6 @@ CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
CONFIG_SCHED_STACK_END_CHECK=y
-CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
© 2016 - 2024 Red Hat, Inc.