Add support for the ethtool get_link and get_link_ksettings
operations. Display standard port information using ethtool.

Before the change:
$ethtool enP30832s1
> No data available

After the change:
$ethtool enP30832s1
> Settings for enP30832s1:
        Supported ports: [  ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: Unknown!
        Duplex: Full
        Auto-negotiation: off
        Port: Other
        PHYAD: 0
        Transceiver: internal
        Link detected: yes

Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
---
Changes in v2:
* Remove support for displaying auto-negotiation details
* Change PORT_DA to PORT_OTHER
---
 drivers/net/ethernet/microsoft/mana/mana_ethtool.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
index dc3864377538..349f11bf8e64 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
@@ -443,6 +443,15 @@ static int mana_set_ringparam(struct net_device *ndev,
 	return err;
 }
 
+static int mana_get_link_ksettings(struct net_device *ndev,
+				   struct ethtool_link_ksettings *cmd)
+{
+	cmd->base.duplex = DUPLEX_FULL;
+	cmd->base.port = PORT_OTHER;
+
+	return 0;
+}
+
 const struct ethtool_ops mana_ethtool_ops = {
 	.get_ethtool_stats	= mana_get_ethtool_stats,
 	.get_sset_count		= mana_get_sset_count,
@@ -456,4 +465,6 @@ const struct ethtool_ops mana_ethtool_ops = {
 	.set_channels		= mana_set_channels,
 	.get_ringparam          = mana_get_ringparam,
 	.set_ringparam          = mana_set_ringparam,
+	.get_link_ksettings	= mana_get_link_ksettings,
+	.get_link		= ethtool_op_get_link,
 };
-- 
2.34.1

On Sun, Sep 29, 2024 at 10:42:14PM -0700, Erni Sri Satya Vennela wrote:
> Add support for the ethtool get_link and get_link_ksettings
> operations. Display standard port information using ethtool.
> 
> Before the change:
> $ethtool enP30832s1
> > No data available
> 
> After the change:
> $ethtool enP30832s1
> > Settings for enP30832s1:
>         Supported ports: [  ]
>         Supported link modes:   Not reported
>         Supported pause frame use: No
>         Supports auto-negotiation: No
>         Supported FEC modes: Not reported
>         Advertised link modes:  Not reported
>         Advertised pause frame use: No
>         Advertised auto-negotiation: No
>         Advertised FEC modes: Not reported
>         Speed: Unknown!
>         Duplex: Full
>         Auto-negotiation: off
>         Port: Other
>         PHYAD: 0
>         Transceiver: internal
>         Link detected: yes
> 
> Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
> Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
> ---
> Changes in v2:
> * Remove support for displaying auto-negotiation details
> * Change PORT_DA to PORT_OTHER

Thanks, this version looks good to me.

Reviewed-by: Simon Horman <horms@kernel.org>