Add property "qcom,cmb_msr_num" to support CMB MSR(mux select register)
for TPDM. It specifies the number of CMB MSR registers supported by
the TDPM.

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
---
 .../devicetree/bindings/arm/qcom,coresight-tpdm.yaml   | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
index 507a5f887097..75190318b253 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -70,6 +70,15 @@ properties:
     minimum: 0
     maximum: 32
 
+  qcom,cmb-msrs-num:
+    description:
+      Specifies the number of CMB MSR(mux select register) registers supported
+      by the monitor. If this property is not configured or set to 0, it means
+      this TPDM doesn't support CMB MSR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 32
+
   clocks:
     maxItems: 1
 
@@ -124,6 +133,7 @@ examples:
       reg = <0x06c29000 0x1000>;
 
       qcom,cmb-element-size = /bits/ 8 <64>;
+      qcom,cmb-msrs-num = <32>;
 
       clocks = <&aoss_qmp>;
       clock-names = "apb_pclk";
-- 
2.17.1

On 19/01/2024 04:23, Tao Zhang wrote:
> Add property "qcom,cmb_msr_num" to support CMB MSR(mux select register)
> for TPDM. It specifies the number of CMB MSR registers supported by
> the TDPM.

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.

Missing "qcom,coresight-tpdm:" prefix.

With this fixed:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof