Add SPMI node to SDX75 dtsi.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sdx75.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
index 21d5d55..6e2d07f 100644
--- a/arch/arm64/boot/dts/qcom/sdx75.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
@@ -469,6 +469,29 @@
 			interrupt-controller;
 		};
 
+		spmi_bus: spmi@c400000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x0 0x0c400000 0x0 0x3000>,
+			      <0x0 0x0c500000 0x0 0x400000>,
+			      <0x0 0x0c440000 0x0 0x80000>,
+			      <0x0 0x0c4c0000 0x0 0x10000>,
+			      <0x0 0x0c42d000 0x0 0x4000>;
+			reg-names = "core",
+				    "chnls",
+				    "obsrvr",
+				    "intr",
+				    "cnfg";
+			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "periph_irq";
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			qcom,bus-id = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
 		tlmm: pinctrl@f000000 {
 			compatible = "qcom,sdx75-tlmm";
 			reg = <0x0 0x0f000000 0x0 0x400000>;
-- 
2.7.4

On 7.08.2023 15:38, Rohit Agarwal wrote:
> Add SPMI node to SDX75 dtsi.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad