drivers/pwm/pwm-mtk-disp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
From: xinlei lee <xinlei.lee@mediatek.com>
In the original mtk_disp_pwm_get_state() function, the result of reading
con0 & BIT(0) is enabled as disp_pwm.
In order to conform to the register table, we should use the disp_pwm
base address as the enabled judgment.
Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: xinlei lee <xinlei.lee@mediatek.com>
---
Base on the branch of Linux-next/master.
change since v2:
1. Modify the code for readability.
change since v1:
1. Modify the way to set disp_pwm enbale.
---
---
drivers/pwm/pwm-mtk-disp.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index c605013e4114..3fbb4bae93a4 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -178,7 +178,7 @@ static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
{
struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
u64 rate, period, high_width;
- u32 clk_div, con0, con1;
+ u32 clk_div, pwm_en, con0, con1;
int err;
err = clk_prepare_enable(mdp->clk_main);
@@ -197,7 +197,8 @@ static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
rate = clk_get_rate(mdp->clk_main);
con0 = readl(mdp->base + mdp->data->con0);
con1 = readl(mdp->base + mdp->data->con1);
- state->enabled = !!(con0 & BIT(0));
+ pwm_en = readl(mdp->base + DISP_PWM_EN);
+ state->enabled = !!(pwm_en & mdp->data->enable_mask);
clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0);
period = FIELD_GET(PWM_PERIOD_MASK, con1);
/*
--
2.18.0
Hello, On Thu, Sep 29, 2022 at 06:26:49PM +0800, xinlei.lee@mediatek.com wrote: > From: xinlei lee <xinlei.lee@mediatek.com> > > In the original mtk_disp_pwm_get_state() function, the result of reading > con0 & BIT(0) is enabled as disp_pwm. > In order to conform to the register table, we should use the disp_pwm > base address as the enabled judgment. I assume the change is fine. However I don't understand the commit log. My guess is you mean: mtk_disp_pwm_get_state() wrongly uses bit 0 of CON0 to judge if the PWM is enabled. However that is indicated by a bit (at a machine dependent position) in the DISP_PWM_EN register. Fix this accordingly. > Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()") > > Signed-off-by: xinlei lee <xinlei.lee@mediatek.com> Nitpick: There is no empty line between Fixes: and S-o-b. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
© 2016 - 2024 Red Hat, Inc.