If the initialization is not finished, then filling input data to
the FIFO may fail. So it is better to add initialization finishing
check in the runtime resume for suspend & resume case.

And consider the case of three instances working in parallel,
increase the retry times to 50 for more initialization time.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_asrc.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index aa5edf32d988..bae263b90ac1 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -20,6 +20,7 @@
 
 #define IDEAL_RATIO_DECIMAL_DEPTH 26
 #define DIVIDER_NUM  64
+#define INIT_TRY_NUM 50
 
 #define pair_err(fmt, ...) \
 	dev_err(&asrc->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
@@ -579,7 +580,7 @@ static void fsl_asrc_start_pair(struct fsl_asrc_pair *pair)
 {
 	struct fsl_asrc *asrc = pair->asrc;
 	enum asrc_pair_index index = pair->index;
-	int reg, retry = 10, i;
+	int reg, retry = INIT_TRY_NUM, i;
 
 	/* Enable the current pair */
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
@@ -592,6 +593,10 @@ static void fsl_asrc_start_pair(struct fsl_asrc_pair *pair)
 		reg &= ASRCFG_INIRQi_MASK(index);
 	} while (!reg && --retry);
 
+	/* FIXME: Doesn't treat initialization timeout as error */
+	if (!retry)
+		dev_warn(&asrc->pdev->dev, "initialization isn't finished\n");
+
 	/* Make the input fifo to ASRC STALL level */
 	regmap_read(asrc->regmap, REG_ASRCNCR, &reg);
 	for (i = 0; i < pair->channels * 4; i++)
@@ -1257,6 +1262,7 @@ static int fsl_asrc_runtime_resume(struct device *dev)
 {
 	struct fsl_asrc *asrc = dev_get_drvdata(dev);
 	struct fsl_asrc_priv *asrc_priv = asrc->private;
+	int reg, retry = INIT_TRY_NUM;
 	int i, ret;
 	u32 asrctr;
 
@@ -1295,6 +1301,17 @@ static int fsl_asrc_runtime_resume(struct device *dev)
 	regmap_update_bits(asrc->regmap, REG_ASRCTR,
 			   ASRCTR_ASRCEi_ALL_MASK, asrctr);
 
+	/* Wait for status of initialization for every enabled pairs */
+	do {
+		udelay(5);
+		regmap_read(asrc->regmap, REG_ASRCFG, &reg);
+		reg = (reg >> ASRCFG_INIRQi_SHIFT(0)) & 0x7;
+	} while ((reg != ((asrctr >> ASRCTR_ASRCEi_SHIFT(0)) & 0x7)) && --retry);
+
+	/* FIXME: Doesn't treat initialization timeout as error */
+	if (!retry)
+		dev_warn(dev, "initialization isn't finished\n");
+
 	return 0;
 
 disable_asrck_clk:
-- 
2.34.1

On Mon, Sep 5, 2022 at 3:47 AM Shengjiu Wang <shengjiu.wang@nxp.com> wrote:
> @@ -1295,6 +1301,17 @@ static int fsl_asrc_runtime_resume(struct device *dev)
>         regmap_update_bits(asrc->regmap, REG_ASRCTR,
>                            ASRCTR_ASRCEi_ALL_MASK, asrctr);
>
> +       /* Wait for status of initialization for every enabled pairs */
> +       do {
> +               udelay(5);
> +               regmap_read(asrc->regmap, REG_ASRCFG, &reg);
> +               reg = (reg >> ASRCFG_INIRQi_SHIFT(0)) & 0x7;
> +       } while ((reg != ((asrctr >> ASRCTR_ASRCEi_SHIFT(0)) & 0x7)) && --retry);
> +
> +       /* FIXME: Doesn't treat initialization timeout as error */
> +       if (!retry)
> +               dev_warn(dev, "initialization isn't finished\n");

Any reason why not just dev_err?