drivers/pwm/pwm-mtk-disp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
From: xinlei lee <xinlei.lee@mediatek.com>
In the original mtk_disp_pwm_get_state() function, the result of reading
con0 & BIT(0) is enabled as disp_pwm.
In order to conform to the register table, we should use the disp_pwm
base address as the enabled judgment.
Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()")
Signed-off-by: xinlei lee <xinlei.lee@mediatek.com>
---
drivers/pwm/pwm-mtk-disp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index c605013e4114..50425cd1de61 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -197,7 +197,7 @@ static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
rate = clk_get_rate(mdp->clk_main);
con0 = readl(mdp->base + mdp->data->con0);
con1 = readl(mdp->base + mdp->data->con1);
- state->enabled = !!(con0 & BIT(0));
+ state->enabled = !!(readl(mdp->base) & BIT(0));
clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0);
period = FIELD_GET(PWM_PERIOD_MASK, con1);
/*
--
2.18.0
> In the original mtk_disp_pwm_get_state() function, the result of reading > con0 & BIT(0) is enabled as disp_pwm. > In order to conform to the register table, we should use the disp_pwm > base address as the enabled judgment. > > Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()") > Signed-off-by: xinlei lee <xinlei.lee@mediatek.com> > --- > drivers/pwm/pwm-mtk-disp.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c > index c605013e4114..50425cd1de61 100644 > --- a/drivers/pwm/pwm-mtk-disp.c > +++ b/drivers/pwm/pwm-mtk-disp.c > @@ -197,7 +197,7 @@ static void mtk_disp_pwm_get_state(struct pwm_chip *chip, > rate = clk_get_rate(mdp->clk_main); > con0 = readl(mdp->base + mdp->data->con0); > con1 = readl(mdp->base + mdp->data->con1); > - state->enabled = !!(con0 & BIT(0)); > + state->enabled = !!(readl(mdp->base) & BIT(0)); > clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0); > period = FIELD_GET(PWM_PERIOD_MASK, con1); > /* Reviewed-by: Miles Chen <miles.chen@mediatek.com>
On 23/08/2022 10:31, xinlei.lee@mediatek.com wrote: > From: xinlei lee <xinlei.lee@mediatek.com> > > In the original mtk_disp_pwm_get_state() function, the result of reading > con0 & BIT(0) is enabled as disp_pwm. > In order to conform to the register table, we should use the disp_pwm > base address as the enabled judgment. > > Fixes: 3f2b16734914 ("pwm: mtk-disp: Implement atomic API .get_state()") > Signed-off-by: xinlei lee <xinlei.lee@mediatek.com> This is a fix so not really related with the change adding new device. Send them separately in the future. Best regards, Krzysztof
© 2016 - 2024 Red Hat, Inc.