arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++ .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 + arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++ 6 files changed, 679 insertions(+)
This patch set is to add bolero digital macros, WCD and maxim codecs nodes
for audio on sc7280 based platforms.
This patch set depends on:
[LPASS DTS: wcd related pinmux reorg]
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389
[Clock DTS: reset control changes]
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002
[Clock: External MCLK and reset control driver changes]
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267
[Clock DTS: lpasscc node disable and lpasscore node name changes]
-- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325
Changes Since V13:
-- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches.
-- Remove redundant output high setting in wcd reset node.
-- Revert external mclk name.
-- Update dependency list.
-- Rebase as per latest kernel repository.
Changes Since V12:
-- Update 'lpasscore' clock node name to lpass_core to match latest clock patches.
-- Update external mclk0 name and it's source node.
-- Move sound node to separate wcd specific dtsi file.
-- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file.
-- Update dependency list.
Changes Since V11:
-- Remove output-low pinconf setting in wcd-reset-n-sleep node.
-- Update dependency list.
Changes Since V10:
-- Modify digital macro codecs pin control labels.
-- Updated dependency list.
Changes Since V9:
-- Move wcd codec and digital codec nodes to sc7280-qcard file.
-- Modify the reg property as per link number in sound node.
-- Fix the us-euro pin control usage in wcd codec node.
-- Move wcd pin control nodes to specific crd board files.
-- Sort max98360a codec node in alphabetical order.
-- Modify the commit messages.
Changes Since V8:
-- Split patches as per sc7280 CRD revision 3, 4 and 5 boards.
-- Add corresponding dt nodes for herobrine crd boards.
-- Update dai-link node names as per dt-bindings in sound node.
-- Add reg property in sound node as per dt-bindings which was removed in previous series.
-- Fix typo errors.
-- Update wcd codec pin control properties in board specific files.
Changes Since V7:
-- Remove redundant interrupt names in soundwire node.
-- Fix typo errors.
-- Remove redundant reg property in sound node.
-- Rebased on top of latest kernel tip.
Changes Since V6:
-- Modify link-names and audio routing in a sound node.
-- Move amp_en pin control node to appropriate consumer patch.
-- Split patches as per digital macro codecs and board specific codecs and sort it.
-- Modify label and node names to lpass specific.
Changes Since V5:
-- Move soc specific bolero digital codec nodes to soc specific file.
-- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series.
-- Change node name and remove redundant status property in sound node.
Changes Since V4:
-- Update nodes in sorting order.
-- Update DTS node names as per dt-bindings.
-- Update Node properties in proper order.
-- Update missing pinctrl properties like US/EURO HS selection, wcd reset control.
-- Remove redundant labels.
-- Remove unused size cells and address cells in tx macro node.
-- Keep all same nodes at one place, which are defined in same file.
-- Add max98360a codec node to herobrine board specific targets.
Changes Since V3:
-- Move digital codec macro nodes to board specific dtsi file.
-- Update pin controls in lpass cpu node.
-- Update dependency patch list.
-- Create patches on latest kernel.
Changes Since V2:
-- Add power domains to digital codec macro nodes.
-- Change clock node usage in lpass cpu node.
-- Add codec mem clock to lpass cpu node.
-- Modify the node names to be generic.
-- Move sound and codec nodes to root node.
-- sort dai links as per reg.
-- Fix typo errors.
Changes Since V1:
-- Update the commit message of cpu node patch.
-- Add gpio control property to support Euro headset in wcd938x node.
-- Fix clock properties in lpass cpu and digital codec macro node.
Srinivasa Rao Mandadapu (12):
arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital
macro codecs
arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
1.0/2.0 and IDP boards
arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD
3.0/3.1
arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and
IDP boards
arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP
boards
arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
arm64: dts: qcom: sc7280: Add lpass cpu node
arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and
IDP boards.
arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP
boards
arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++
.../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 +
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++
arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++
6 files changed, 679 insertions(+)
--
2.7.4
On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote: > This patch set is to add bolero digital macros, WCD and maxim codecs nodes > for audio on sc7280 based platforms. > > This patch set depends on: > [LPASS DTS: wcd related pinmux reorg] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389 > [Clock DTS: reset control changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 > [Clock: External MCLK and reset control driver changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267 As far as I understand I can't apply this series until Taniya's clock patches has been picked up? > [Clock DTS: lpasscc node disable and lpasscore node name changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325 You're the author of these 3 other patch sets, so why are you asking me to stitch them together, instead of just sending me one series that I can easily apply. If you want your patches merged, make it easy for the maintainer to merge them! Regards, Bjorn > > Changes Since V13: > -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches. > -- Remove redundant output high setting in wcd reset node. > -- Revert external mclk name. > -- Update dependency list. > -- Rebase as per latest kernel repository. > Changes Since V12: > -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches. > -- Update external mclk0 name and it's source node. > -- Move sound node to separate wcd specific dtsi file. > -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file. > -- Update dependency list. > Changes Since V11: > -- Remove output-low pinconf setting in wcd-reset-n-sleep node. > -- Update dependency list. > Changes Since V10: > -- Modify digital macro codecs pin control labels. > -- Updated dependency list. > Changes Since V9: > -- Move wcd codec and digital codec nodes to sc7280-qcard file. > -- Modify the reg property as per link number in sound node. > -- Fix the us-euro pin control usage in wcd codec node. > -- Move wcd pin control nodes to specific crd board files. > -- Sort max98360a codec node in alphabetical order. > -- Modify the commit messages. > Changes Since V8: > -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards. > -- Add corresponding dt nodes for herobrine crd boards. > -- Update dai-link node names as per dt-bindings in sound node. > -- Add reg property in sound node as per dt-bindings which was removed in previous series. > -- Fix typo errors. > -- Update wcd codec pin control properties in board specific files. > Changes Since V7: > -- Remove redundant interrupt names in soundwire node. > -- Fix typo errors. > -- Remove redundant reg property in sound node. > -- Rebased on top of latest kernel tip. > Changes Since V6: > -- Modify link-names and audio routing in a sound node. > -- Move amp_en pin control node to appropriate consumer patch. > -- Split patches as per digital macro codecs and board specific codecs and sort it. > -- Modify label and node names to lpass specific. > Changes Since V5: > -- Move soc specific bolero digital codec nodes to soc specific file. > -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series. > -- Change node name and remove redundant status property in sound node. > Changes Since V4: > -- Update nodes in sorting order. > -- Update DTS node names as per dt-bindings. > -- Update Node properties in proper order. > -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control. > -- Remove redundant labels. > -- Remove unused size cells and address cells in tx macro node. > -- Keep all same nodes at one place, which are defined in same file. > -- Add max98360a codec node to herobrine board specific targets. > Changes Since V3: > -- Move digital codec macro nodes to board specific dtsi file. > -- Update pin controls in lpass cpu node. > -- Update dependency patch list. > -- Create patches on latest kernel. > Changes Since V2: > -- Add power domains to digital codec macro nodes. > -- Change clock node usage in lpass cpu node. > -- Add codec mem clock to lpass cpu node. > -- Modify the node names to be generic. > -- Move sound and codec nodes to root node. > -- sort dai links as per reg. > -- Fix typo errors. > Changes Since V1: > -- Update the commit message of cpu node patch. > -- Add gpio control property to support Euro headset in wcd938x node. > -- Fix clock properties in lpass cpu and digital codec macro node. > > Srinivasa Rao Mandadapu (12): > arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital > macro codecs > arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD > 1.0/2.0 and IDP boards > arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD > 3.0/3.1 > arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and > IDP boards > arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 > arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP > boards > arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node > arm64: dts: qcom: sc7280: Add lpass cpu node > arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and > IDP boards. > arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 > arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP > boards > arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 > > arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++ > .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++ > arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 + > arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++ > arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++ > arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++ > 6 files changed, 679 insertions(+) > > -- > 2.7.4 >
On 7/7/2022 8:58 PM, Bjorn Andersson wrote: Thanks for your time Bjorn!!! > On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote: > >> This patch set is to add bolero digital macros, WCD and maxim codecs nodes >> for audio on sc7280 based platforms. >> >> This patch set depends on: >> [LPASS DTS: wcd related pinmux reorg] >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389 >> [Clock DTS: reset control changes] >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 >> [Clock: External MCLK and reset control driver changes] >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267 > As far as I understand I can't apply this series until Taniya's clock > patches has been picked up? Okay. It seems Taniya's patches also in final stage of review. > >> [Clock DTS: lpasscc node disable and lpasscore node name changes] >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325 > You're the author of these 3 other patch sets, so why are you asking me > to stitch them together, instead of just sending me one series that I > can easily apply. Here 3 dependent patch series are of Clock Teams patches. only patch from me is [ LPASS DTS: wcd related pinmux reorg] patch. Which is not dependent on any other patch and can be applied directly as it's reviewed by. Will take care next time and will combine patches wherever is possible. > > If you want your patches merged, make it easy for the maintainer to > merge them! Sure. Will take care next time. For Now will keep it as it is, as it's independent patch and only one. > > Regards, > Bjorn > >> Changes Since V13: >> -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches. >> -- Remove redundant output high setting in wcd reset node. >> -- Revert external mclk name. >> -- Update dependency list. >> -- Rebase as per latest kernel repository. >> Changes Since V12: >> -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches. >> -- Update external mclk0 name and it's source node. >> -- Move sound node to separate wcd specific dtsi file. >> -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file. >> -- Update dependency list. >> Changes Since V11: >> -- Remove output-low pinconf setting in wcd-reset-n-sleep node. >> -- Update dependency list. >> Changes Since V10: >> -- Modify digital macro codecs pin control labels. >> -- Updated dependency list. >> Changes Since V9: >> -- Move wcd codec and digital codec nodes to sc7280-qcard file. >> -- Modify the reg property as per link number in sound node. >> -- Fix the us-euro pin control usage in wcd codec node. >> -- Move wcd pin control nodes to specific crd board files. >> -- Sort max98360a codec node in alphabetical order. >> -- Modify the commit messages. >> Changes Since V8: >> -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards. >> -- Add corresponding dt nodes for herobrine crd boards. >> -- Update dai-link node names as per dt-bindings in sound node. >> -- Add reg property in sound node as per dt-bindings which was removed in previous series. >> -- Fix typo errors. >> -- Update wcd codec pin control properties in board specific files. >> Changes Since V7: >> -- Remove redundant interrupt names in soundwire node. >> -- Fix typo errors. >> -- Remove redundant reg property in sound node. >> -- Rebased on top of latest kernel tip. >> Changes Since V6: >> -- Modify link-names and audio routing in a sound node. >> -- Move amp_en pin control node to appropriate consumer patch. >> -- Split patches as per digital macro codecs and board specific codecs and sort it. >> -- Modify label and node names to lpass specific. >> Changes Since V5: >> -- Move soc specific bolero digital codec nodes to soc specific file. >> -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series. >> -- Change node name and remove redundant status property in sound node. >> Changes Since V4: >> -- Update nodes in sorting order. >> -- Update DTS node names as per dt-bindings. >> -- Update Node properties in proper order. >> -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control. >> -- Remove redundant labels. >> -- Remove unused size cells and address cells in tx macro node. >> -- Keep all same nodes at one place, which are defined in same file. >> -- Add max98360a codec node to herobrine board specific targets. >> Changes Since V3: >> -- Move digital codec macro nodes to board specific dtsi file. >> -- Update pin controls in lpass cpu node. >> -- Update dependency patch list. >> -- Create patches on latest kernel. >> Changes Since V2: >> -- Add power domains to digital codec macro nodes. >> -- Change clock node usage in lpass cpu node. >> -- Add codec mem clock to lpass cpu node. >> -- Modify the node names to be generic. >> -- Move sound and codec nodes to root node. >> -- sort dai links as per reg. >> -- Fix typo errors. >> Changes Since V1: >> -- Update the commit message of cpu node patch. >> -- Add gpio control property to support Euro headset in wcd938x node. >> -- Fix clock properties in lpass cpu and digital codec macro node. >> >> Srinivasa Rao Mandadapu (12): >> arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital >> macro codecs >> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD >> 1.0/2.0 and IDP boards >> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD >> 3.0/3.1 >> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and >> IDP boards >> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 >> arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP >> boards >> arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node >> arm64: dts: qcom: sc7280: Add lpass cpu node >> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and >> IDP boards. >> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 >> arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP >> boards >> arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 >> >> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++ >> .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++ >> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 + >> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++ >> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++ >> arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++ >> 6 files changed, 679 insertions(+) >> >> -- >> 2.7.4 >>
On Thu, 7 Jul 2022 18:52:52 +0530, Srinivasa Rao Mandadapu wrote:
> This patch set is to add bolero digital macros, WCD and maxim codecs nodes
> for audio on sc7280 based platforms.
>
> This patch set depends on:
> [LPASS DTS: wcd related pinmux reorg]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389
> [Clock DTS: reset control changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002
> [Clock: External MCLK and reset control driver changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267
> [Clock DTS: lpasscc node disable and lpasscore node name changes]
> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325
>
> [...]
Applied, thanks!
[01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs
commit: 12ef689f09abb50f0862c8e08138dd45cbf27233
[02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards
commit: d3219de8bcebe4057696a2f99ce90c8812114c78
[03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1
commit: d5a959f96be1b27c81d6197d66624cd6cc146fe6
[04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards
commit: f8b4eb64f2003e0a1fa5011009955d46f90af285
[05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1
commit: 0a3a56a93fd96cb3e3d42778f275e91750c242a7
[06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards
commit: d6c006f510d9f29ff78761bb3ef50f14ebc05b7b
[07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node
commit: 14afeaf917375967bb84b4347cd8e4156b84c470
[08/12] arm64: dts: qcom: sc7280: Add lpass cpu node
commit: aee6873edb93a3919706f70884e55880d8c727a5
[09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards.
commit: 8cf4133bc1fbb6fbc695e4398b940caf3ec59ba5
[10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1
commit: f10c73ac6e90ca2343fc4f06b61ce8c1824c9bfd
[11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards
commit: ece7d81f2447f4fd4f5d5345e921036871babf2b
[12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
commit: 29e0b604f040ef794cd36d43b97bd9c040ed99e6
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
© 2016 - 2026 Red Hat, Inc.