jh71x0_clk_mux_determine_rate() is the same as __clk_mux_determine_rate(),
so use the latter to save some LoC.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
 drivers/clk/starfive/clk-starfive-jh71x0.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
index b372083d11c3..aebc99264a0b 100644
--- a/drivers/clk/starfive/clk-starfive-jh71x0.c
+++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
@@ -174,12 +174,6 @@ static int jh71x0_clk_set_parent(struct clk_hw *hw, u8 index)
 	return 0;
 }
 
-static int jh71x0_clk_mux_determine_rate(struct clk_hw *hw,
-					 struct clk_rate_request *req)
-{
-	return clk_mux_determine_rate_flags(hw, req, 0);
-}
-
 static int jh71x0_clk_get_phase(struct clk_hw *hw)
 {
 	struct jh71x0_clk *clk = jh71x0_clk_from(hw);
@@ -261,7 +255,7 @@ static const struct clk_ops jh71x0_clk_gdiv_ops = {
 };
 
 static const struct clk_ops jh71x0_clk_mux_ops = {
-	.determine_rate = jh71x0_clk_mux_determine_rate,
+	.determine_rate = __clk_mux_determine_rate,
 	.set_parent = jh71x0_clk_set_parent,
 	.get_parent = jh71x0_clk_get_parent,
 	.debug_init = jh71x0_clk_debug_init,
@@ -271,7 +265,7 @@ static const struct clk_ops jh71x0_clk_gmux_ops = {
 	.enable = jh71x0_clk_enable,
 	.disable = jh71x0_clk_disable,
 	.is_enabled = jh71x0_clk_is_enabled,
-	.determine_rate = jh71x0_clk_mux_determine_rate,
+	.determine_rate = __clk_mux_determine_rate,
 	.set_parent = jh71x0_clk_set_parent,
 	.get_parent = jh71x0_clk_get_parent,
 	.debug_init = jh71x0_clk_debug_init,
-- 
2.34.1

Quoting Christophe JAILLET (2023-07-07 13:02:18)
> jh71x0_clk_mux_determine_rate() is the same as __clk_mux_determine_rate(),
> so use the latter to save some LoC.
> 
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---

Applied to clk-next

On Fri, 7 Jul 2023 at 22:02, Christophe JAILLET
<christophe.jaillet@wanadoo.fr> wrote:
>
> jh71x0_clk_mux_determine_rate() is the same as __clk_mux_determine_rate(),
> so use the latter to save some LoC.
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

Thanks!
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>

> ---
>  drivers/clk/starfive/clk-starfive-jh71x0.c | 10 ++--------
>  1 file changed, 2 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.c b/drivers/clk/starfive/clk-starfive-jh71x0.c
> index b372083d11c3..aebc99264a0b 100644
> --- a/drivers/clk/starfive/clk-starfive-jh71x0.c
> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.c
> @@ -174,12 +174,6 @@ static int jh71x0_clk_set_parent(struct clk_hw *hw, u8 index)
>         return 0;
>  }
>
> -static int jh71x0_clk_mux_determine_rate(struct clk_hw *hw,
> -                                        struct clk_rate_request *req)
> -{
> -       return clk_mux_determine_rate_flags(hw, req, 0);
> -}
> -
>  static int jh71x0_clk_get_phase(struct clk_hw *hw)
>  {
>         struct jh71x0_clk *clk = jh71x0_clk_from(hw);
> @@ -261,7 +255,7 @@ static const struct clk_ops jh71x0_clk_gdiv_ops = {
>  };
>
>  static const struct clk_ops jh71x0_clk_mux_ops = {
> -       .determine_rate = jh71x0_clk_mux_determine_rate,
> +       .determine_rate = __clk_mux_determine_rate,
>         .set_parent = jh71x0_clk_set_parent,
>         .get_parent = jh71x0_clk_get_parent,
>         .debug_init = jh71x0_clk_debug_init,
> @@ -271,7 +265,7 @@ static const struct clk_ops jh71x0_clk_gmux_ops = {
>         .enable = jh71x0_clk_enable,
>         .disable = jh71x0_clk_disable,
>         .is_enabled = jh71x0_clk_is_enabled,
> -       .determine_rate = jh71x0_clk_mux_determine_rate,
> +       .determine_rate = __clk_mux_determine_rate,
>         .set_parent = jh71x0_clk_set_parent,
>         .get_parent = jh71x0_clk_get_parent,
>         .debug_init = jh71x0_clk_debug_init,
> --
> 2.34.1
>