From: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Assign SBDF to the PCI devices being passed through with bus 0.
The resulting topology is where PCIe devices reside on the bus 0 of the
root complex itself (embedded endpoints).
This implementation is limited to 32 devices which are allowed on
a single PCI bus.
Please note, that at the moment only function 0 of a multifunction
device can be passed through.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
---
In v13:
- s/depends on/select/ in Kconfig
- check pdev->sbdf.fn instead of two booleans in add_virtual_device()
- comment #endifs in sched.h
- clarify comment about limits in vpci.h with seg/bus limit
In v11:
- Fixed code formatting
- Removed bogus write_unlock() call
- Fixed type for new_dev_number
In v10:
- Removed ASSERT(pcidevs_locked())
- Removed redundant code (local sbdf variable, clearing sbdf during
device removal, etc)
- Added __maybe_unused attribute to "out:" label
- Introduced HAS_VPCI_GUEST_SUPPORT Kconfig option, as this is the
first patch where it is used (previously was in "vpci: add hooks for
PCI device assign/de-assign")
In v9:
- Lock in add_virtual_device() replaced with ASSERT (thanks, Stewart)
In v8:
- Added write lock in add_virtual_device
Since v6:
- re-work wrt new locking scheme
- OT: add ASSERT(pcidevs_write_locked()); to add_virtual_device()
Since v5:
- s/vpci_add_virtual_device/add_virtual_device and make it static
- call add_virtual_device from vpci_assign_device and do not use
REGISTER_VPCI_INIT machinery
- add pcidevs_locked ASSERT
- use DECLARE_BITMAP for vpci_dev_assigned_map
Since v4:
- moved and re-worked guest sbdf initializers
- s/set_bit/__set_bit
- s/clear_bit/__clear_bit
- minor comment fix s/Virtual/Guest/
- added VPCI_MAX_VIRT_DEV constant (PCI_SLOT(~0) + 1) which will be used
later for counting the number of MMIO handlers required for a guest
(Julien)
Since v3:
- make use of VPCI_INIT
- moved all new code to vpci.c which belongs to it
- changed open-coded 31 to PCI_SLOT(~0)
- added comments and code to reject multifunction devices with
functions other than 0
- updated comment about vpci_dev_next and made it unsigned int
- implement roll back in case of error while assigning/deassigning devices
- s/dom%pd/%pd
Since v2:
- remove casts that are (a) malformed and (b) unnecessary
- add new line for better readability
- remove CONFIG_HAS_VPCI_GUEST_SUPPORT ifdef's as the relevant vPCI
functions are now completely gated with this config
- gate common code with CONFIG_HAS_VPCI_GUEST_SUPPORT
New in v2
---
xen/drivers/Kconfig | 4 +++
xen/drivers/vpci/vpci.c | 57 +++++++++++++++++++++++++++++++++++++++++
xen/include/xen/sched.h | 10 +++++++-
xen/include/xen/vpci.h | 12 +++++++++
4 files changed, 82 insertions(+), 1 deletion(-)
diff --git a/xen/drivers/Kconfig b/xen/drivers/Kconfig
index db94393f47a6..20050e9bb8b3 100644
--- a/xen/drivers/Kconfig
+++ b/xen/drivers/Kconfig
@@ -15,4 +15,8 @@ source "drivers/video/Kconfig"
config HAS_VPCI
bool
+config HAS_VPCI_GUEST_SUPPORT
+ bool
+ select HAS_VPCI
+
endmenu
diff --git a/xen/drivers/vpci/vpci.c b/xen/drivers/vpci/vpci.c
index 260b72875ee1..3cd142068f4e 100644
--- a/xen/drivers/vpci/vpci.c
+++ b/xen/drivers/vpci/vpci.c
@@ -40,6 +40,49 @@ extern vpci_register_init_t *const __start_vpci_array[];
extern vpci_register_init_t *const __end_vpci_array[];
#define NUM_VPCI_INIT (__end_vpci_array - __start_vpci_array)
+#ifdef CONFIG_HAS_VPCI_GUEST_SUPPORT
+static int add_virtual_device(struct pci_dev *pdev)
+{
+ struct domain *d = pdev->domain;
+ unsigned int new_dev_number;
+
+ if ( is_hardware_domain(d) )
+ return 0;
+
+ ASSERT(rw_is_write_locked(&pdev->domain->pci_lock));
+
+ /*
+ * Each PCI bus supports 32 devices/slots at max or up to 256 when
+ * there are multi-function ones which are not yet supported.
+ */
+ if ( pdev->sbdf.fn )
+ {
+ gdprintk(XENLOG_ERR, "%pp: only function 0 passthrough supported\n",
+ &pdev->sbdf);
+ return -EOPNOTSUPP;
+ }
+ new_dev_number = find_first_zero_bit(d->vpci_dev_assigned_map,
+ VPCI_MAX_VIRT_DEV);
+ if ( new_dev_number == VPCI_MAX_VIRT_DEV )
+ return -ENOSPC;
+
+ __set_bit(new_dev_number, &d->vpci_dev_assigned_map);
+
+ /*
+ * Both segment and bus number are 0:
+ * - we emulate a single host bridge for the guest, e.g. segment 0
+ * - with bus 0 the virtual devices are seen as embedded
+ * endpoints behind the root complex
+ *
+ * TODO: add support for multi-function devices.
+ */
+ pdev->vpci->guest_sbdf = PCI_SBDF(0, 0, new_dev_number, 0);
+
+ return 0;
+}
+
+#endif /* CONFIG_HAS_VPCI_GUEST_SUPPORT */
+
void vpci_deassign_device(struct pci_dev *pdev)
{
unsigned int i;
@@ -49,6 +92,12 @@ void vpci_deassign_device(struct pci_dev *pdev)
if ( !has_vpci(pdev->domain) || !pdev->vpci )
return;
+#ifdef CONFIG_HAS_VPCI_GUEST_SUPPORT
+ if ( pdev->vpci->guest_sbdf.sbdf != ~0 )
+ __clear_bit(pdev->vpci->guest_sbdf.dev,
+ &pdev->domain->vpci_dev_assigned_map);
+#endif
+
spin_lock(&pdev->vpci->lock);
while ( !list_empty(&pdev->vpci->handlers) )
{
@@ -105,6 +154,13 @@ int vpci_assign_device(struct pci_dev *pdev)
INIT_LIST_HEAD(&pdev->vpci->handlers);
spin_lock_init(&pdev->vpci->lock);
+#ifdef CONFIG_HAS_VPCI_GUEST_SUPPORT
+ pdev->vpci->guest_sbdf.sbdf = ~0;
+ rc = add_virtual_device(pdev);
+ if ( rc )
+ goto out;
+#endif
+
for ( i = 0; i < NUM_VPCI_INIT; i++ )
{
rc = __start_vpci_array[i](pdev);
@@ -112,6 +168,7 @@ int vpci_assign_device(struct pci_dev *pdev)
break;
}
+ out: __maybe_unused;
if ( rc )
vpci_deassign_device(pdev);
diff --git a/xen/include/xen/sched.h b/xen/include/xen/sched.h
index c3adec1aca3c..daa3c1743047 100644
--- a/xen/include/xen/sched.h
+++ b/xen/include/xen/sched.h
@@ -484,7 +484,15 @@ struct domain
* 2. pdev->vpci->lock
*/
rwlock_t pci_lock;
-#endif
+#ifdef CONFIG_HAS_VPCI_GUEST_SUPPORT
+ /*
+ * The bitmap which shows which device numbers are already used by the
+ * virtual PCI bus topology and is used to assign a unique SBDF to the
+ * next passed through virtual PCI device.
+ */
+ DECLARE_BITMAP(vpci_dev_assigned_map, VPCI_MAX_VIRT_DEV);
+#endif /* CONFIG_HAS_VPCI_GUEST_SUPPORT */
+#endif /* CONFIG_HAS_PCI */
#ifdef CONFIG_HAS_PASSTHROUGH
struct domain_iommu iommu;
diff --git a/xen/include/xen/vpci.h b/xen/include/xen/vpci.h
index 77320a667e55..a69c640d065a 100644
--- a/xen/include/xen/vpci.h
+++ b/xen/include/xen/vpci.h
@@ -21,6 +21,14 @@ typedef int vpci_register_init_t(struct pci_dev *dev);
#define VPCI_ECAM_BDF(addr) (((addr) & 0x0ffff000) >> 12)
+/*
+ * Maximum number of devices supported by the virtual bus topology:
+ * each PCI bus supports 32 devices/slots at max or up to 256 when
+ * there are multi-function ones which are not yet supported.
+ * This limit implies only segment 0, bus 0 is supported.
+ */
+#define VPCI_MAX_VIRT_DEV (PCI_SLOT(~0) + 1)
+
#define REGISTER_VPCI_INIT(x, p) \
static vpci_register_init_t *const x##_entry \
__used_section(".data.vpci." p) = x
@@ -175,6 +183,10 @@ struct vpci {
struct vpci_arch_msix_entry arch;
} entries[];
} *msix;
+#ifdef CONFIG_HAS_VPCI_GUEST_SUPPORT
+ /* Guest SBDF of the device. */
+ pci_sbdf_t guest_sbdf;
+#endif
#endif
};
--
2.43.0