Link to branch: https://github.com/mediouni-m/qemu whpx (tag for this submission: whpx-v10)

Missing features:
- PSCI state sync with Hyper-V
- Interrupt controller save-restore: As such, save/restore of VM state is currently blocked.
- SVE register sync: I didn't have the time to test this on pre-release hardware with SVE2 support yet.

Known bugs:
- reboots are currently broken
- U-Boot still doesn't work (hangs when trying to parse firmware) but EDK2 does.

Note:

"target/arm/kvm: add constants for new PSCI versions" taken from the mailing list.

"accel/system: Introduce hwaccel_enabled() helper" taken from the mailing list, added here
as part of this series to make it compilable as a whole.

"hw/arm: virt: add GICv2m for the case when ITS is not available" present in both the HVF
vGIC and this series.

And another note:
Seems that unlike HVF there isn't direct correspondence between WHv registers and the actual register layout,
so didn't do changes there to a sysreg.inc.

And yet another note:

Would it be acceptable to have reboots handled as shutdowns for the initial merge? Looks to me that due to Qemu changes,
reboots regressed further and don't work even for single-core VMs now...

Updates since v9:
- v9 and v8 were not submitted properly because of my MTA not behaving, sorry for that.
- v10 introduces a new argument, -M msi=, to handle MSI-X configuration more granularly.
- That surfaced what I think is a bug (?), with vms->its=1 on GICv2 configurations... or I did understand everything wrong.

Updates since v8:
- Oopsie due to email provider ratelimiting.

Updates since v7:
- Oops, fixing bug in "hw/arm: virt: cleanly fail on attempt to use the platform vGIC together with ITS".
Other commits are unchanged.

Updates since v6:
- Rebasing
- Fixing a bug in the GICv3+GICv2m case for ACPI table generation
- getting rid of the slots infrastructure for memory management
- Place the docs commit right after the "cleanly fail on attempt to run GICv3+GICv2m on an unsupported config" one
as that's what switches ITS to a tristate.
- Fixing a build issue when getting rid of the arch-specific arm64 hvf-stub.

Updates since v5:
- Rebasing
- Address review comments
- Rework ITS enablement to a tristate
- On x86: move away from deprecated APIs to get/set APIC state

Updates since v4:
- Taking into account review comments
- Add migration blocker in the vGICv3 code due to missing interrupt controller save/restore
- Debug register sync

Updates since v3:
- Disabling SVE on WHPX
- Taking into account review comments incl:

- fixing x86 support
- reduce the amount of __x86_64__ checks in common code to the minimum (winhvemulation)
which can be reduced even further down the road.
- generalize get_physical_address_range into something common between hvf and whpx

Updates since v2:
- Fixed up a rebase screwup for whpx-internal.h
- Fixed ID_AA64ISAR1_EL1 and ID_AA64ISAR2_EL1 feature probe for -cpu host
- Switched to ID_AA64PFR1_EL1/ID_AA64DFR0_EL1 instead of their non-AA64 variant

Updates since v1:
- Shutdowns and reboots
- MPIDR_EL1 register sync
- Fixing GICD_TYPER_LPIS value
- IPA size clamping
- -cpu host now implemented

Mohamed Mediouni (25):
  qtest: hw/arm: virt: skip ACPI test for ITS off
  hw/arm: virt: add GICv2m for the case when ITS is not available
  tests: data: update AArch64 ACPI tables
  whpx: Move around files before introducing AArch64 support
  whpx: reshuffle common code
  whpx: ifdef out winhvemulation on non-x86_64
  whpx: common: add WHPX_INTERCEPT_DEBUG_TRAPS define
  hw, target, accel: whpx: change apic_in_platform to kernel_irqchip
  whpx: interrupt controller support
  whpx: add arm64 support
  whpx: change memory management logic
  target/arm: cpu: mark WHPX as supporting PSCI 1.3
  hw/arm: virt: cleanly fail on attempt to use the platform vGIC
    together with ITS
  hw: arm: virt: rework MSI-X configuration
  hw: arm: virt-acpi-build: add hack
  docs: arm: update virt machine model description
  whpx: arm64: clamp down IPA size
  hw/arm, accel/hvf, whpx: unify get_physical_address_range between WHPX
    and HVF
  whpx: arm64: implement -cpu host
  target/arm: whpx: instantiate GIC early
  whpx: arm64: gicv3: add migration blocker
  whpx: enable arm64 builds
  MAINTAINERS: update maintainers for WHPX
  whpx: apic: use non-deprecated APIs to control interrupt controller
    state
  whpx: arm64: check for physical address width after WHPX availability

Philippe Mathieu-Daudé (1):
  accel/system: Introduce hwaccel_enabled() helper

Sebastian Ott (1):
  target/arm/kvm: add constants for new PSCI versions

 MAINTAINERS                                   |   11 +-
 accel/hvf/hvf-all.c                           |    7 +-
 accel/meson.build                             |    1 +
 accel/whpx/meson.build                        |    7 +
 {target/i386 => accel}/whpx/whpx-accel-ops.c  |    6 +-
 accel/whpx/whpx-common.c                      |  548 +++++++++
 docs/system/arm/virt.rst                      |   10 +-
 hw/arm/virt-acpi-build.c                      |   16 +-
 hw/arm/virt.c                                 |  132 ++-
 hw/i386/x86-cpu.c                             |    4 +-
 hw/intc/arm_gicv3_common.c                    |    3 +
 hw/intc/arm_gicv3_whpx.c                      |  249 ++++
 hw/intc/meson.build                           |    1 +
 include/hw/arm/virt.h                         |    8 +-
 include/hw/boards.h                           |    3 +-
 include/hw/intc/arm_gicv3_common.h            |    3 +
 include/system/hvf_int.h                      |    2 +
 include/system/hw_accel.h                     |   13 +
 .../whpx => include/system}/whpx-accel-ops.h  |    4 +-
 include/system/whpx-all.h                     |   20 +
 include/system/whpx-common.h                  |   26 +
 .../whpx => include/system}/whpx-internal.h   |   23 +-
 include/system/whpx.h                         |    4 +-
 meson.build                                   |   20 +-
 target/arm/cpu.c                              |    3 +
 target/arm/cpu64.c                            |   19 +-
 target/arm/hvf-stub.c                         |   20 -
 target/arm/hvf/hvf.c                          |    6 +-
 target/arm/hvf_arm.h                          |    3 -
 target/arm/kvm-consts.h                       |    2 +
 target/arm/meson.build                        |    2 +-
 target/arm/whpx/meson.build                   |    5 +
 target/arm/whpx/whpx-all.c                    | 1018 +++++++++++++++++
 target/arm/whpx/whpx-stub.c                   |   15 +
 target/arm/whpx_arm.h                         |   17 +
 target/i386/cpu-apic.c                        |    2 +-
 target/i386/hvf/hvf.c                         |   11 +
 target/i386/whpx/meson.build                  |    1 -
 target/i386/whpx/whpx-all.c                   |  569 +--------
 target/i386/whpx/whpx-apic.c                  |   48 +-
 tests/data/acpi/aarch64/virt/APIC.its_off     |  Bin 164 -> 188 bytes
 41 files changed, 2212 insertions(+), 650 deletions(-)
 create mode 100644 accel/whpx/meson.build
 rename {target/i386 => accel}/whpx/whpx-accel-ops.c (96%)
 create mode 100644 accel/whpx/whpx-common.c
 create mode 100644 hw/intc/arm_gicv3_whpx.c
 rename {target/i386/whpx => include/system}/whpx-accel-ops.h (92%)
 create mode 100644 include/system/whpx-all.h
 create mode 100644 include/system/whpx-common.h
 rename {target/i386/whpx => include/system}/whpx-internal.h (89%)
 delete mode 100644 target/arm/hvf-stub.c
 create mode 100644 target/arm/whpx/meson.build
 create mode 100644 target/arm/whpx/whpx-all.c
 create mode 100644 target/arm/whpx/whpx-stub.c
 create mode 100644 target/arm/whpx_arm.h

-- 
2.50.1 (Apple Git-155)

> On 29. Oct 2025, at 00:47, Mohamed Mediouni <mohamed@unpredictable.fr> wrote:
> 
> Link to branch: https://github.com/mediouni-m/qemu whpx (tag for this submission: whpx-v10)
> 
Erratum: the tag (and the patchset) is whpx-v9, not v10