[PATCH v3 01/12] qtest/e1000e|igb: Clear interrupt-cause and msix pending bits after irq

Nicholas Piggin posted 12 patches 6 months, 2 weeks ago
Maintainers: Dmitry Fleytman <dmitry.fleytman@gmail.com>, Akihiko Odaki <akihiko.odaki@daynix.com>, Jason Wang <jasowang@redhat.com>, Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>, Fabiano Rosas <farosas@suse.de>, Laurent Vivier <lvivier@redhat.com>, Paolo Bonzini <pbonzini@redhat.com>
[PATCH v3 01/12] qtest/e1000e|igb: Clear interrupt-cause and msix pending bits after irq
Posted by Nicholas Piggin 6 months, 2 weeks ago
The e1000e and igb tests do not clear the ICR/EICR cause bits (or
set auto-clear) on seeing queue interrupts, which inhibits the
triggering of a new interrupt. The msix pending bit which is used
to test for the interrupt is also not cleared (the vector is masked).

Fix this by clearing the ICR/EICR cause bits, and the msix pending
bit using the PBACLR device register.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Dmitry Fleytman <dmitry.fleytman@gmail.com>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 tests/qtest/e1000e-test.c | 9 ++++++++-
 tests/qtest/igb-test.c    | 8 ++++++++
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/tests/qtest/e1000e-test.c b/tests/qtest/e1000e-test.c
index de9738fdb74..746d26cfb67 100644
--- a/tests/qtest/e1000e-test.c
+++ b/tests/qtest/e1000e-test.c
@@ -66,6 +66,10 @@ static void e1000e_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *a
 
     /* Wait for TX WB interrupt */
     e1000e_wait_isr(d, E1000E_TX0_MSG_ID);
+    /* Read ICR to make it ready for next interrupt, assert TXQ0 cause */
+    g_assert(e1000e_macreg_read(d, E1000_ICR) & E1000_ICR_TXQ0);
+    /* Write PBACLR to clear the MSIX pending bit */
+    e1000e_macreg_write(d, E1000_PBACLR, (1 << E1000E_TX0_MSG_ID));
 
     /* Check DD bit */
     g_assert_cmphex(le32_to_cpu(descr.upper.data) & E1000_TXD_STAT_DD, ==,
@@ -117,7 +121,10 @@ static void e1000e_receive_verify(QE1000E *d, int *test_sockets, QGuestAllocator
 
     /* Wait for TX WB interrupt */
     e1000e_wait_isr(d, E1000E_RX0_MSG_ID);
-
+    /* Read ICR to make it ready for next interrupt, assert RXQ0 cause */
+    g_assert(e1000e_macreg_read(d, E1000_ICR) & E1000_ICR_RXQ0);
+    /* Write PBACLR to clear the MSIX pending bit */
+    e1000e_macreg_write(d, E1000_PBACLR, (1 << E1000E_RX0_MSG_ID));
     /* Check DD bit */
     g_assert_cmphex(le32_to_cpu(descr.wb.upper.status_error) &
         E1000_RXD_STAT_DD, ==, E1000_RXD_STAT_DD);
diff --git a/tests/qtest/igb-test.c b/tests/qtest/igb-test.c
index 3d397ea6973..cf8b4131cf2 100644
--- a/tests/qtest/igb-test.c
+++ b/tests/qtest/igb-test.c
@@ -69,6 +69,10 @@ static void igb_send_verify(QE1000E *d, int *test_sockets, QGuestAllocator *allo
 
     /* Wait for TX WB interrupt */
     e1000e_wait_isr(d, E1000E_TX0_MSG_ID);
+    /* Read EICR which clears it ready for next interrupt, assert TXQ0 cause */
+    g_assert(e1000e_macreg_read(d, E1000_EICR) & (1 << E1000E_TX0_MSG_ID));
+    /* Write PBACLR to clear the MSIX pending bit */
+    e1000e_macreg_write(d, E1000_PBACLR, (1 << E1000E_TX0_MSG_ID));
 
     /* Check DD bit */
     g_assert_cmphex(le32_to_cpu(descr.wb.status) & E1000_TXD_STAT_DD, ==,
@@ -120,6 +124,10 @@ static void igb_receive_verify(QE1000E *d, int *test_sockets, QGuestAllocator *a
 
     /* Wait for TX WB interrupt */
     e1000e_wait_isr(d, E1000E_RX0_MSG_ID);
+    /* Read EICR which clears it ready for next interrupt, assert RXQ0 cause */
+    g_assert(e1000e_macreg_read(d, E1000_EICR) & (1 << E1000E_RX0_MSG_ID));
+    /* Write PBACLR to clear the MSIX pending bit */
+    e1000e_macreg_write(d, E1000_PBACLR, (1 << E1000E_RX0_MSG_ID));
 
     /* Check DD bit */
     g_assert_cmphex(le32_to_cpu(descr.wb.upper.status_error) &
-- 
2.47.1
Re: [PATCH v3 01/12] qtest/e1000e|igb: Clear interrupt-cause and msix pending bits after irq
Posted by Fabiano Rosas 6 months ago
Nicholas Piggin <npiggin@gmail.com> writes:

> The e1000e and igb tests do not clear the ICR/EICR cause bits (or
> set auto-clear) on seeing queue interrupts, which inhibits the
> triggering of a new interrupt. The msix pending bit which is used
> to test for the interrupt is also not cleared (the vector is masked).
>
> Fix this by clearing the ICR/EICR cause bits, and the msix pending
> bit using the PBACLR device register.
>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
> Cc: Dmitry Fleytman <dmitry.fleytman@gmail.com>
> Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
> Cc: Sriram Yagnaraman <sriram.yagnaraman@ericsson.com>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>

Reviewed-by: Fabiano Rosas <farosas@suse.de>