Refactors the existing GIC create code to extract common code to wire the
vcpu<->gic interrupts. This function could be used with cold-plug case and also
used when vCPU is hot-plugged. It also introduces a new function to unwire the
vcpu<->gic interrupts for the vCPU hot-unplug cases.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reported-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
[4/05/2024: Issue with total number of PPI available during create GIC]
Suggested-by: Miguel Luis <miguel.luis@oracle.com>
[5/05/2024: Fix the total number of PPIs available as per ARM BSA to avoid overflow]
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
hw/arm/virt.c | 154 ++++++++++++++++++++++++++++-------------
hw/core/gpio.c | 2 +-
include/hw/qdev-core.h | 2 +
target/arm/cpu-qom.h | 18 +++--
4 files changed, 118 insertions(+), 58 deletions(-)
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index d4bcaedb8f..0a912919ec 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -765,6 +765,107 @@ static bool gicv3_nmi_present(VirtMachineState *vms)
(vms->gic_version != VIRT_GIC_VERSION_2);
}
+/*
+ * Mapping from the output timer irq lines from the CPU to the GIC PPI inputs
+ * we use for the virt board.
+ */
+const int timer_irq[] = {
+ [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
+ [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
+ [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ,
+ [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ,
+};
+
+static void unwire_gic_cpu_irqs(VirtMachineState *vms, CPUState *cs)
+{
+ MachineState *ms = MACHINE(vms);
+ unsigned int max_cpus = ms->smp.max_cpus;
+ DeviceState *cpudev = DEVICE(cs);
+ DeviceState *gicdev = vms->gic;
+ int cpu = CPU(cs)->cpu_index;
+ int type = vms->gic_version;
+ int irq, num_gpio_in;
+
+ for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
+ qdev_disconnect_gpio_out_named(cpudev, NULL, irq);
+ }
+
+ if (type != VIRT_GIC_VERSION_2) {
+ qdev_disconnect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+ 0);
+ } else if (vms->virt) {
+ qdev_disconnect_gpio_out_named(gicdev, SYSBUS_DEVICE_GPIO_IRQ,
+ cpu + 4 * max_cpus);
+ }
+
+ /*
+ * RFC: Question: This currently does not takes care of intimating the
+ * devices which might be sitting on system bus. Do we need a
+ * sysbus_disconnect_irq() which also does the job of notification beside
+ * disconnection?
+ */
+ qdev_disconnect_gpio_out_named(cpudev, "pmu-interrupt", 0);
+
+ /* Unwire GIC's IRQ/FIQ/VIRQ/VFIQ/NMI/VINMI interrupt outputs to CPU */
+ num_gpio_in = (vms->gic_version != VIRT_GIC_VERSION_2) ?
+ NUM_GPIO_IN : NUM_GICV2_GPIO_IN;
+ for (irq = 0; irq < num_gpio_in; irq++) {
+ qdev_disconnect_gpio_out_named(gicdev, SYSBUS_DEVICE_GPIO_IRQ,
+ cpu + irq * max_cpus);
+ }
+}
+
+static void wire_gic_cpu_irqs(VirtMachineState *vms, CPUState *cs)
+{
+ MachineState *ms = MACHINE(vms);
+ unsigned int max_cpus = ms->smp.max_cpus;
+ DeviceState *cpudev = DEVICE(cs);
+ DeviceState *gicdev = vms->gic;
+ int cpu = CPU(cs)->cpu_index;
+ int type = vms->gic_version;
+ SysBusDevice *gicbusdev;
+ int intidbase;
+ int irqn;
+
+ intidbase = NUM_IRQS + cpu * GIC_INTERNAL;
+
+ for (irqn = 0; irqn < ARRAY_SIZE(timer_irq); irqn++) {
+ qdev_connect_gpio_out(cpudev, irqn,
+ qdev_get_gpio_in(gicdev,
+ intidbase + timer_irq[irqn]));
+ }
+
+ gicbusdev = SYS_BUS_DEVICE(gicdev);
+ if (type != VIRT_GIC_VERSION_2) {
+ qemu_irq irq = qdev_get_gpio_in(gicdev,
+ intidbase + ARCH_GIC_MAINT_IRQ);
+ qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+ 0, irq);
+ } else if (vms->virt) {
+ qemu_irq irq = qdev_get_gpio_in(gicdev,
+ intidbase + ARCH_GIC_MAINT_IRQ);
+ sysbus_connect_irq(gicbusdev, cpu + 4 * max_cpus, irq);
+ }
+
+ qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+ qdev_get_gpio_in(gicdev,
+ intidbase + VIRTUAL_PMU_IRQ));
+
+ sysbus_connect_irq(gicbusdev, cpu, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+ sysbus_connect_irq(gicbusdev, cpu + max_cpus,
+ qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+ sysbus_connect_irq(gicbusdev, cpu + 2 * max_cpus,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+ sysbus_connect_irq(gicbusdev, cpu + 3 * max_cpus,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+ if (vms->gic_version != VIRT_GIC_VERSION_2) {
+ sysbus_connect_irq(gicbusdev, cpu + 4 * max_cpus,
+ qdev_get_gpio_in(cpudev, ARM_CPU_NMI));
+ sysbus_connect_irq(gicbusdev, cpu + 5 * max_cpus,
+ qdev_get_gpio_in(cpudev, ARM_CPU_VINMI));
+ }
+}
+
static void create_gic(VirtMachineState *vms, MemoryRegion *mem)
{
MachineState *ms = MACHINE(vms);
@@ -868,54 +969,7 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem)
* CPU's inputs.
*/
for (i = 0; i < smp_cpus; i++) {
- DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
- int intidbase = NUM_IRQS + i * GIC_INTERNAL;
- /* Mapping from the output timer irq lines from the CPU to the
- * GIC PPI inputs we use for the virt board.
- */
- const int timer_irq[] = {
- [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
- [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
- [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ,
- [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ,
- [GTIMER_HYPVIRT] = ARCH_TIMER_NS_EL2_VIRT_IRQ,
- };
-
- for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
- qdev_connect_gpio_out(cpudev, irq,
- qdev_get_gpio_in(vms->gic,
- intidbase + timer_irq[irq]));
- }
-
- if (vms->gic_version != VIRT_GIC_VERSION_2) {
- qemu_irq irq = qdev_get_gpio_in(vms->gic,
- intidbase + ARCH_GIC_MAINT_IRQ);
- qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
- 0, irq);
- } else if (vms->virt) {
- qemu_irq irq = qdev_get_gpio_in(vms->gic,
- intidbase + ARCH_GIC_MAINT_IRQ);
- sysbus_connect_irq(gicbusdev, i + 4 * max_cpus, irq);
- }
-
- qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
- qdev_get_gpio_in(vms->gic, intidbase
- + VIRTUAL_PMU_IRQ));
-
- sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
- sysbus_connect_irq(gicbusdev, i + max_cpus,
- qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
- sysbus_connect_irq(gicbusdev, i + 2 * max_cpus,
- qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
- sysbus_connect_irq(gicbusdev, i + 3 * max_cpus,
- qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
-
- if (vms->gic_version != VIRT_GIC_VERSION_2) {
- sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus,
- qdev_get_gpio_in(cpudev, ARM_CPU_NMI));
- sysbus_connect_irq(gicbusdev, i + 5 * smp_cpus,
- qdev_get_gpio_in(cpudev, ARM_CPU_VINMI));
- }
+ wire_gic_cpu_irqs(vms, qemu_get_cpu(i));
}
fdt_add_gic_node(vms);
@@ -3089,7 +3143,7 @@ static void virt_cpu_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
*/
if (vms->acpi_dev) {
/* TODO: update GIC about this hotplug change here */
- /* TODO: wire the GIC<->CPU irqs */
+ wire_gic_cpu_irqs(vms, cs);
}
}
@@ -3172,7 +3226,7 @@ static void virt_cpu_unplug(HotplugHandler *hotplug_dev, DeviceState *dev,
/* TODO: update the acpi cpu hotplug state for cpu hot-unplug */
- /* TODO: unwire the gic-cpu irqs here */
+ unwire_gic_cpu_irqs(vms, cs);
/* TODO: update the GIC about this hot unplug change */
/* TODO: unregister cpu for reset & update F/W info for the next boot */
diff --git a/hw/core/gpio.c b/hw/core/gpio.c
index 80d07a6ec9..abb164d5c0 100644
--- a/hw/core/gpio.c
+++ b/hw/core/gpio.c
@@ -143,7 +143,7 @@ qemu_irq qdev_get_gpio_out_connector(DeviceState *dev, const char *name, int n)
/* disconnect a GPIO output, returning the disconnected input (if any) */
-static qemu_irq qdev_disconnect_gpio_out_named(DeviceState *dev,
+qemu_irq qdev_disconnect_gpio_out_named(DeviceState *dev,
const char *name, int n)
{
char *propname = g_strdup_printf("%s[%d]",
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index aa97c34a4b..71f169718c 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -739,6 +739,8 @@ qemu_irq qdev_get_gpio_out_connector(DeviceState *dev, const char *name, int n);
*/
qemu_irq qdev_intercept_gpio_out(DeviceState *dev, qemu_irq icpt,
const char *name, int n);
+qemu_irq qdev_disconnect_gpio_out_named(DeviceState *dev,
+ const char *name, int n);
BusState *qdev_get_child_bus(DeviceState *dev, const char *name);
diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h
index b497667d61..e49fb096de 100644
--- a/target/arm/cpu-qom.h
+++ b/target/arm/cpu-qom.h
@@ -37,13 +37,17 @@ DECLARE_CLASS_CHECKERS(AArch64CPUClass, AARCH64_CPU,
#define ARM_CPU_TYPE_NAME(name) (name ARM_CPU_TYPE_SUFFIX)
/* Meanings of the ARMCPU object's seven inbound GPIO lines */
-#define ARM_CPU_IRQ 0
-#define ARM_CPU_FIQ 1
-#define ARM_CPU_VIRQ 2
-#define ARM_CPU_VFIQ 3
-#define ARM_CPU_NMI 4
-#define ARM_CPU_VINMI 5
-#define ARM_CPU_VFNMI 6
+enum {
+ ARM_CPU_IRQ = 0,
+ ARM_CPU_FIQ = 1,
+ ARM_CPU_VIRQ = 2,
+ ARM_CPU_VFIQ = 3,
+ NUM_GICV2_GPIO_IN = (ARM_CPU_VFIQ+1),
+ ARM_CPU_NMI = 4,
+ ARM_CPU_VINMI = 5,
+ /* ARM_CPU_VFNMI = 6, */ /* not used? */
+ NUM_GPIO_IN = (ARM_CPU_VINMI+1),
+};
/* For M profile, some registers are banked secure vs non-secure;
* these are represented as a 2-element array where the first element
--
2.34.1