From: Sergey Kambalin <serg.oker@gmail.com>
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
Message-id: 20240226000259.2752893-37-sergey.kambalin@auriga.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
tests/qtest/bcm2838-mailbox.c | 1 -
tests/qtest/bcm2838-mbox-property-test.c | 207 +++++++++++++++++++++++
tests/qtest/meson.build | 2 +-
3 files changed, 208 insertions(+), 2 deletions(-)
create mode 100644 tests/qtest/bcm2838-mbox-property-test.c
diff --git a/tests/qtest/bcm2838-mailbox.c b/tests/qtest/bcm2838-mailbox.c
index 1efd3c628a9..0928a3dff8e 100644
--- a/tests/qtest/bcm2838-mailbox.c
+++ b/tests/qtest/bcm2838-mailbox.c
@@ -11,7 +11,6 @@
#include "hw/registerfields.h"
#include "libqtest-single.h"
#include "bcm2838-mailbox.h"
-#include "hw/arm/raspberrypi-fw-defs.h"
REG32(MBOX_EXCHNG_REG, 0)
FIELD(MBOX_EXCHNG_REG, CHANNEL, 0, 4)
diff --git a/tests/qtest/bcm2838-mbox-property-test.c b/tests/qtest/bcm2838-mbox-property-test.c
new file mode 100644
index 00000000000..1361e84a988
--- /dev/null
+++ b/tests/qtest/bcm2838-mbox-property-test.c
@@ -0,0 +1,207 @@
+/*
+ * Tests set for BCM2838 mailbox property interface.
+ *
+ * Copyright (c) 2022 Auriga
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/registerfields.h"
+#include "libqtest-single.h"
+#include "bcm2838-mailbox.h"
+#include "hw/arm/raspberrypi-fw-defs.h"
+
+REG32(MBOX_SIZE_STAT, 0)
+FIELD(MBOX_SIZE_STAT, SIZE, 0, 31)
+FIELD(MBOX_SIZE_STAT, SUCCESS, 31, 1)
+
+REG32(SET_POWER_STATE_CMD, 0)
+FIELD(SET_POWER_STATE_CMD, EN, 0, 1)
+FIELD(SET_POWER_STATE_CMD, WAIT, 1, 1)
+
+REG32(GET_CLOCK_STATE_CMD, 0)
+FIELD(GET_CLOCK_STATE_CMD, EN, 0, 1)
+FIELD(GET_CLOCK_STATE_CMD, NPRES, 1, 1)
+
+#define MBOX_TEST_MESSAGE_ADDRESS 0x10000000
+
+#define TEST_TAG(x) RPI_FWREQ_ ## x
+#define TEST_TAG_TYPE(x) TAG_##x##_t
+
+#define TEST_FN_NAME(test, subtest) \
+ test ## _ ## subtest ## _test
+
+#define SETUP_FN_NAME(test, subtest) \
+ test ## _ ## subtest ## _setup
+
+#define CHECK_FN_NAME(test, subtest) \
+ test ## _ ## subtest ## _spec_check
+
+#define DECLARE_TEST_CASE_SETUP(testname, ...) \
+ void SETUP_FN_NAME(testname, __VA_ARGS__) \
+ (TEST_TAG_TYPE(testname) * tag)
+
+/*----------------------------------------------------------------------------*/
+#define DECLARE_TEST_CASE(testname, ...) \
+ __attribute__((weak)) \
+ void SETUP_FN_NAME(testname, __VA_ARGS__) \
+ (TEST_TAG_TYPE(testname) * tag); \
+ static void CHECK_FN_NAME(testname, __VA_ARGS__) \
+ (TEST_TAG_TYPE(testname) *tag); \
+ static void TEST_FN_NAME(testname, __VA_ARGS__)(void) { \
+ struct { \
+ MboxBufHeader header; \
+ TEST_TAG_TYPE(testname) tag; \
+ uint32_t end_tag; \
+ } mailbox_buffer = { 0 }; \
+ \
+ QTestState *qts = qtest_init("-machine raspi4b"); \
+ \
+ mailbox_buffer.header.size = sizeof(mailbox_buffer); \
+ mailbox_buffer.header.req_resp_code = MBOX_PROCESS_REQUEST; \
+ \
+ mailbox_buffer.tag.id = TEST_TAG(testname); \
+ mailbox_buffer.tag.value_buffer_size = MAX( \
+ sizeof(mailbox_buffer.tag.request.value), \
+ sizeof(mailbox_buffer.tag.response.value)); \
+ mailbox_buffer.tag.request.zero = 0; \
+ \
+ mailbox_buffer.end_tag = RPI_FWREQ_PROPERTY_END; \
+ \
+ if (SETUP_FN_NAME(testname, __VA_ARGS__)) { \
+ SETUP_FN_NAME(testname, __VA_ARGS__)(&mailbox_buffer.tag); \
+ } \
+ \
+ qtest_memwrite(qts, MBOX_TEST_MESSAGE_ADDRESS, \
+ &mailbox_buffer, sizeof(mailbox_buffer)); \
+ qtest_mbox1_write_message(qts, MBOX_CHANNEL_ID_PROPERTY, \
+ MBOX_TEST_MESSAGE_ADDRESS); \
+ \
+ qtest_mbox0_read_message(qts, MBOX_CHANNEL_ID_PROPERTY, \
+ &mailbox_buffer, sizeof(mailbox_buffer)); \
+ \
+ g_assert_cmphex(mailbox_buffer.header.req_resp_code, ==, MBOX_SUCCESS);\
+ \
+ g_assert_cmphex(mailbox_buffer.tag.id, ==, TEST_TAG(testname)); \
+ \
+ uint32_t size = FIELD_EX32(mailbox_buffer.tag.response.size_stat, \
+ MBOX_SIZE_STAT, SIZE); \
+ uint32_t success = FIELD_EX32(mailbox_buffer.tag.response.size_stat, \
+ MBOX_SIZE_STAT, SUCCESS); \
+ g_assert_cmpint(size, ==, sizeof(mailbox_buffer.tag.response.value)); \
+ g_assert_cmpint(success, ==, 1); \
+ \
+ CHECK_FN_NAME(testname, __VA_ARGS__)(&mailbox_buffer.tag); \
+ \
+ qtest_quit(qts); \
+ } \
+ static void CHECK_FN_NAME(testname, __VA_ARGS__) \
+ (TEST_TAG_TYPE(testname) * tag)
+
+/*----------------------------------------------------------------------------*/
+
+#define QTEST_ADD_TEST_CASE(testname, ...) \
+ qtest_add_func(stringify(/bcm2838/mbox/property/ \
+ TEST_FN_NAME(testname, __VA_ARGS__)-test), \
+ TEST_FN_NAME(testname, __VA_ARGS__))
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_FIRMWARE_REVISION) {
+ g_assert_cmpint(tag->response.value.revision, ==, FIRMWARE_REVISION);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_BOARD_REVISION) {
+ g_assert_cmpint(tag->response.value.revision, ==, BOARD_REVISION);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_ARM_MEMORY) {
+ g_assert_cmphex(tag->response.value.base, ==, ARM_MEMORY_BASE);
+ g_assert_cmphex(tag->response.value.size, ==, ARM_MEMORY_SIZE);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_VC_MEMORY) {
+ g_assert_cmphex(tag->response.value.base, ==, VC_MEMORY_BASE);
+ g_assert_cmphex(tag->response.value.size, ==, VC_MEMORY_SIZE);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(SET_POWER_STATE) {
+ uint32_t enabled =
+ FIELD_EX32(tag->response.value.cmd, SET_POWER_STATE_CMD, EN);
+ uint32_t wait =
+ FIELD_EX32(tag->response.value.cmd, SET_POWER_STATE_CMD, WAIT);
+ g_assert_cmphex(tag->response.value.device_id, ==, DEVICE_ID_UART0);
+ g_assert_cmpint(enabled, ==, 1);
+ g_assert_cmpint(wait, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(SET_POWER_STATE) {
+ tag->request.value.device_id = DEVICE_ID_UART0;
+ tag->response.value.cmd =
+ FIELD_DP32(tag->response.value.cmd, SET_POWER_STATE_CMD, EN, 1);
+ tag->response.value.cmd =
+ FIELD_DP32(tag->response.value.cmd, SET_POWER_STATE_CMD, WAIT, 1);
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_STATE) {
+ uint32_t enabled =
+ FIELD_EX32(tag->response.value.cmd, GET_CLOCK_STATE_CMD, EN);
+ uint32_t not_present =
+ FIELD_EX32(tag->response.value.cmd, GET_CLOCK_STATE_CMD, NPRES);
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_CORE);
+ g_assert_cmphex(enabled, ==, 1);
+ g_assert_cmphex(not_present, ==, 0);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_STATE) {
+ tag->request.value.clock_id = CLOCK_ID_CORE;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_CLOCK_RATE, EMMC) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_EMMC);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_EMMC);
+}
+DECLARE_TEST_CASE_SETUP(GET_CLOCK_RATE, EMMC) {
+ tag->request.value.clock_id = CLOCK_ID_EMMC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MAX_CLOCK_RATE, EMMC) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_EMMC);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_EMMC);
+}
+DECLARE_TEST_CASE_SETUP(GET_MAX_CLOCK_RATE, EMMC) {
+ tag->request.value.clock_id = CLOCK_ID_EMMC;
+}
+
+/*----------------------------------------------------------------------------*/
+DECLARE_TEST_CASE(GET_MIN_CLOCK_RATE, EMMC) {
+ g_assert_cmphex(tag->response.value.clock_id, ==, CLOCK_ID_EMMC);
+ g_assert_cmphex(tag->response.value.rate, ==, CLOCK_RATE_EMMC);
+}
+DECLARE_TEST_CASE_SETUP(GET_MIN_CLOCK_RATE, EMMC) {
+ tag->request.value.clock_id = CLOCK_ID_EMMC;
+}
+
+/*----------------------------------------------------------------------------*/
+int main(int argc, char **argv)
+{
+ g_test_init(&argc, &argv, NULL);
+
+ QTEST_ADD_TEST_CASE(GET_FIRMWARE_REVISION);
+ QTEST_ADD_TEST_CASE(GET_BOARD_REVISION);
+ QTEST_ADD_TEST_CASE(GET_ARM_MEMORY);
+ QTEST_ADD_TEST_CASE(GET_VC_MEMORY);
+ QTEST_ADD_TEST_CASE(SET_POWER_STATE);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_STATE);
+ QTEST_ADD_TEST_CASE(GET_CLOCK_RATE, EMMC);
+ QTEST_ADD_TEST_CASE(GET_MAX_CLOCK_RATE, EMMC);
+ QTEST_ADD_TEST_CASE(GET_MIN_CLOCK_RATE, EMMC);
+
+ return g_test_run();
+}
diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index e49ce4f0929..194ddf35103 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -230,7 +230,7 @@ qtests_aarch64 = \
['tpm-tis-device-test', 'tpm-tis-device-swtpm-test'] : []) + \
(config_all_devices.has_key('CONFIG_XLNX_ZYNQMP_ARM') ? ['xlnx-can-test', 'fuzz-xlnx-dp-test'] : []) + \
(config_all_devices.has_key('CONFIG_XLNX_VERSAL') ? ['xlnx-canfd-test', 'xlnx-versal-trng-test'] : []) + \
- (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test'] : []) + \
+ (config_all_devices.has_key('CONFIG_RASPI') ? ['bcm2835-dma-test', 'bcm2838-mbox-property-test'] : []) + \
(config_all_accel.has_key('CONFIG_TCG') and \
config_all_devices.has_key('CONFIG_TPM_TIS_I2C') ? ['tpm-tis-i2c-test'] : []) + \
['arm-cpu-features',
--
2.34.1