Hi; here's the latest round of arm patches. I have included also my patchset for the RTC devices to avoid keeping time_t and time_t diffs in 32-bit variables. thanks -- PMM The following changes since commit 156618d9ea67f2f2e31d9dedd97f2dcccbe6808c: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-08-30 09:20:27 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230831 for you to fetch changes up to e73b8bb8a3e9a162f70e9ffbf922d4fafc96bbfb: hw/arm: Set number of MPU regions correctly for an505, an521, an524 (2023-08-31 11:07:02 +0100) ---------------------------------------------------------------- target-arm queue: * Some of the preliminary patches for Cortex-A710 support * i.MX7 and i.MX6UL refactoring * Implement SRC device for i.MX7 * Catch illegal-exception-return from EL3 with bad NSE/NS * Use 64-bit offsets for holding time_t differences in RTC devices * Model correct number of MPU regions for an505, an521, an524 boards ---------------------------------------------------------------- Alex Bennée (1): target/arm: properly document FEAT_CRC32 Jean-Christophe Dubois (6): Remove i.MX7 IOMUX GPR device from i.MX6UL Refactor i.MX6UL processor code Add i.MX6UL missing devices. Refactor i.MX7 processor code Add i.MX7 missing TZ devices and memory regions Add i.MX7 SRC device implementation Peter Maydell (8): target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm() hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference rtc: Use time_t for passing and returning time offsets target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties hw/arm: Set number of MPU regions correctly for an505, an521, an524 Richard Henderson (9): target/arm: Reduce dcz_blocksize to uint8_t target/arm: Allow cpu to configure GM blocksize target/arm: Support more GM blocksizes target/arm: When tag memory is not present, set MTE=1 target/arm: Introduce make_ccsidr64 target/arm: Apply access checks to neoverse-n1 special registers target/arm: Apply access checks to neoverse-v1 special registers target/arm: Suppress FEAT_TRBE (Trace Buffer Extension) target/arm: Implement FEAT_HPDS2 as a no-op docs/system/arm/emulation.rst | 2 + include/hw/arm/armsse.h | 5 + include/hw/arm/armv7m.h | 8 + include/hw/arm/fsl-imx6ul.h | 158 ++++++++++++++++--- include/hw/arm/fsl-imx7.h | 338 ++++++++++++++++++++++++++++++----------- include/hw/misc/imx7_src.h | 66 ++++++++ include/hw/rtc/aspeed_rtc.h | 2 +- include/sysemu/rtc.h | 4 +- target/arm/cpregs.h | 2 + target/arm/cpu.h | 5 +- target/arm/internals.h | 6 - target/arm/tcg/translate.h | 2 + hw/arm/armsse.c | 16 ++ hw/arm/armv7m.c | 21 +++ hw/arm/fsl-imx6ul.c | 174 +++++++++++++-------- hw/arm/fsl-imx7.c | 201 +++++++++++++++++++----- hw/arm/mps2-tz.c | 29 ++++ hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++ hw/rtc/aspeed_rtc.c | 5 +- hw/rtc/m48t59.c | 2 +- hw/rtc/twl92230.c | 4 +- softmmu/rtc.c | 4 +- target/arm/cpu.c | 207 ++++++++++++++----------- target/arm/helper.c | 15 +- target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 102 +++++++++---- target/arm/tcg/helper-a64.c | 9 ++ target/arm/tcg/mte_helper.c | 90 ++++++++--- target/arm/tcg/translate-a64.c | 5 +- hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 31 files changed, 1393 insertions(+), 372 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c From: Richard Henderson <richard.henderson@linaro.org> This value is only 4 bits wide. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230811214031.171020-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool prop_lpa2; /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ - uint32_t dcz_blocksize; + uint8_t dcz_blocksize; + uint64_t rvbar_prop; /* Property/input signals. */ /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we hard-coded the blocksize with GMID_EL1_BS. But the value we choose for -cpu max does not match the value that cortex-a710 uses. Mirror the way we handle dcz_blocksize. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230811214031.171020-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 6 ----- target/arm/tcg/translate.h | 2 ++ target/arm/helper.c | 11 +++++--- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/mte_helper.c | 46 ++++++++++++++++++++++------------ target/arm/tcg/translate-a64.c | 5 ++-- 7 files changed, 45 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint8_t dcz_blocksize; + /* GM blocksize, in log_2(words), ie low 4 bits of GMID_EL0 */ + uint8_t gm_blocksize; uint64_t rvbar_prop; /* Property/input signals. */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs); #endif /* !CONFIG_USER_ONLY */ -/* - * The log2 of the words in the tag block, for GMID_EL1.BS. - * The is the maximum, 256 bytes, which manipulates 64-bits of tags. - */ -#define GMID_EL1_BS 6 - /* * SVE predicates are 1/8 the size of SVE vectors, and cannot use * the same simd_desc() encoding due to restrictions on size. diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.h +++ b/target/arm/tcg/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int8_t btype; /* A copy of cpu->dcz_blocksize. */ uint8_t dcz_blocksize; + /* A copy of cpu->gm_blocksize. */ + uint8_t gm_blocksize; /* True if this page is guarded. */ bool guarded_page; /* Bottom two bits of XScale c15_cpar coprocessor access control reg */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, .access = PL1_RW, .accessfn = access_mte, .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, - { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, - .access = PL1_R, .accessfn = access_aa64_tid5, - .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, { .name = "TCO", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, .type = ARM_CP_NO_RAW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * then define only a RAZ/WI version of PSTATE.TCO. */ if (cpu_isar_feature(aa64_mte, cpu)) { + ARMCPRegInfo gmid_reginfo = { + .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL1_R, .accessfn = access_aa64_tid5, + .type = ARM_CP_CONST, .resetvalue = cpu->gm_blocksize, + }; + define_one_arm_cp_reg(cpu, &gmid_reginfo); define_arm_cp_regs(cpu, mte_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + cpu->gm_blocksize = 6; /* 256 bytes */ cpu->sve_vq.supported = MAKE_64BIT_MASK(0, ARM_MAX_VQ); cpu->sme_vq.supported = SVE_VQ_POW2_MAP; diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(st2g_stub)(CPUARMState *env, uint64_t ptr) } } -#define LDGM_STGM_SIZE (4 << GMID_EL1_BS) - uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_LOAD, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* The tag is squashed to zero if the page does not support tags. */ if (!tag_mem) { return 0; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are loading 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - return ldq_le_p(tag_mem); + switch (gm_bs) { + case 6: + /* 256 bytes -> 16 tags -> 64 result bits */ + return ldq_le_p(tag_mem); + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_STORE, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* * Tag store only happens if the page support tags, @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are storing 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - stq_le_p(tag_mem, val); + switch (gm_bs) { + case 6: + stq_le_p(tag_mem, val); + break; + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STGM(DisasContext *s, arg_ldst_tag *a) gen_helper_stgm(cpu_env, addr, tcg_rt); } else { MMUAccessType acc = MMU_DATA_STORE; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static bool trans_LDGM(DisasContext *s, arg_ldst_tag *a) gen_helper_ldgm(tcg_rt, cpu_env, addr); } else { MMUAccessType acc = MMU_DATA_LOAD; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->cp_regs = arm_cpu->cp_regs; dc->features = env->features; dc->dcz_blocksize = arm_cpu->dcz_blocksize; + dc->gm_blocksize = arm_cpu->gm_blocksize; #ifdef CONFIG_USER_ONLY /* In sve_probe_page, we assume TBI is enabled. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Support all of the easy GM block sizes. Use direct memory operations, since the pointers are aligned. While BS=2 (16 bytes, 1 tag) is a legal setting, that requires an atomic store of one nibble. This is not difficult, but there is also no point in supporting it until required. Note that cortex-a710 sets GM blocksize to match its cacheline size of 64 bytes. I expect many implementations will also match the cacheline, which makes 16 bytes very unlikely. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 18 +++++++++--- target/arm/tcg/mte_helper.c | 56 +++++++++++++++++++++++++++++++------ 2 files changed, 62 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) ID_PFR1, VIRTUALIZATION, 0); } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* + * The architectural range of GM blocksize is 2-6, however qemu + * doesn't support blocksize of 2 (see HELPER(ldgm)). + */ + if (tcg_enabled()) { + assert(cpu->gm_blocksize >= 3 && cpu->gm_blocksize <= 6); + } + #ifndef CONFIG_USER_ONLY - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) { /* * Disable the MTE feature bits if we do not have tag-memory * provided by the machine. */ - cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); - } + if (cpu->tag_memory == NULL) { + cpu->isar.id_aa64pfr1 = + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + } #endif + } if (tcg_enabled()) { /* diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + uint64_t ret; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) /* * The ordering of elements within the word corresponds to - * a little-endian operation. + * a little-endian operation. Computation of shift comes from + * + * index = address<LOG2_TAG_GRANULE+3:LOG2_TAG_GRANULE> + * data<index*4+3:index*4> = tag + * + * Because of the alignment of ptr above, BS=6 has shift=0. + * All memory operations are aligned. Defer support for BS=2, + * requiring insertion or extraction of a nibble, until we + * support a cpu that requires it. */ switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + ret = *(uint8_t *)tag_mem; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + ret = cpu_to_le16(*(uint16_t *)tag_mem); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + ret = cpu_to_le32(*(uint32_t *)tag_mem); + break; case 6: /* 256 bytes -> 16 tags -> 64 result bits */ - return ldq_le_p(tag_mem); + return cpu_to_le64(*(uint64_t *)tag_mem); default: - /* cpu configured with unsupported gm blocksize. */ + /* + * CPU configured with unsupported/invalid gm blocksize. + * This is detected early in arm_cpu_realizefn. + */ g_assert_not_reached(); } + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + return ret << shift; } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - /* - * The ordering of elements within the word corresponds to - * a little-endian operation. - */ + /* See LDGM for comments on BS and on shift. */ + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + val >>= shift; switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + *(uint8_t *)tag_mem = val; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + *(uint16_t *)tag_mem = cpu_to_le16(val); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + *(uint32_t *)tag_mem = cpu_to_le32(val); + break; case 6: - stq_le_p(tag_mem, val); + /* 256 bytes -> 16 tags -> 64 result bits */ + *(uint64_t *)tag_mem = cpu_to_le64(val); break; default: /* cpu configured with unsupported gm blocksize. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When the cpu support MTE, but the system does not, reduce cpu support to user instructions at EL0 instead of completely disabling MTE. If we encounter a cpu implementation which does something else, we can revisit this setting. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) #ifndef CONFIG_USER_ONLY /* - * Disable the MTE feature bits if we do not have tag-memory - * provided by the machine. + * If we do not have tag-memory provided by the machine, + * reduce MTE support to instructions enabled at EL0. + * This matches Cortex-A710 BROADCASTMTE input being LOW. */ if (cpu->tag_memory == NULL) { cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 1); } #endif } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Do not hard-code the constants for Neoverse V1. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 48 ++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" +#include "qemu/units.h" #include "internals.h" #include "cpregs.h" +static uint64_t make_ccsidr64(unsigned assoc, unsigned linesize, + unsigned cachesize) +{ + unsigned lg_linesize = ctz32(linesize); + unsigned sets; + + /* + * The 64-bit CCSIDR_EL1 format is: + * [55:32] number of sets - 1 + * [23:3] associativity - 1 + * [2:0] log2(linesize) - 4 + * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc + */ + assert(assoc != 0); + assert(is_power_of_2(linesize)); + assert(lg_linesize >= 4 && lg_linesize <= 7 + 4); + + /* sets * associativity * linesize == cachesize. */ + sets = cachesize / (assoc * linesize); + assert(cachesize % (assoc * linesize) == 0); + + return ((uint64_t)(sets - 1) << 32) + | ((assoc - 1) << 3) + | (lg_linesize - 4); +} + static void aarch64_a35_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_neoverse_v1_initfn(Object *obj) * The Neoverse-V1 r1p2 TRM lists 32-bit format CCSIDR_EL1 values, * but also says it implements CCIDX, which means they should be * 64-bit format. So we here use values which are based on the textual - * information in chapter 2 of the TRM (and on the fact that - * sets * associativity * linesize == cachesize). - * - * The 64-bit CCSIDR_EL1 format is: - * [55:32] number of sets - 1 - * [23:3] associativity - 1 - * [2:0] log2(linesize) - 4 - * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc - * - * L1: 4-way set associative 64-byte line size, total size 64K, - * so sets is 256. + * information in chapter 2 of the TRM: * + * L1: 4-way set associative 64-byte line size, total size 64K. * L2: 8-way set associative, 64 byte line size, either 512K or 1MB. - * We pick 1MB, so this has 2048 sets. - * * L3: No L3 (this matches the CLIDR_EL1 value). */ - cpu->ccsidr[0] = 0x000000ff0000001aull; /* 64KB L1 dcache */ - cpu->ccsidr[1] = 0x000000ff0000001aull; /* 64KB L1 icache */ - cpu->ccsidr[2] = 0x000007ff0000003aull; /* 1MB L2 cache */ + cpu->ccsidr[0] = make_ccsidr64(4, 64, 64 * KiB); /* L1 dcache */ + cpu->ccsidr[1] = cpu->ccsidr[0]; /* L1 icache */ + cpu->ccsidr[2] = make_ccsidr64(8, 64, 1 * MiB); /* L2 cache */ /* From 3.2.115 SCTLR_EL3 */ cpu->reset_sctlr = 0x30c50838; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Access to many of the special registers is enabled or disabled by ACTLR_EL[23], which we implement as constant 0, which means that all writes outside EL3 should trap. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 2 ++ target/arm/helper.c | 4 ++-- target/arm/tcg/cpu64.c | 46 +++++++++++++++++++++++++++++++++--------- 3 files changed, 41 insertions(+), 11 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +CPAccessResult access_tvm_trvm(CPUARMState *, const ARMCPRegInfo *, bool); + #endif /* TARGET_ARM_CPREGS_H */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, } /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ -static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) +CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) { if (arm_current_el(env) == 1) { uint64_t trap = isread ? HCR_TRVM : HCR_TVM; diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a64fx_initfn(Object *obj) /* TODO: Add A64FX specific HPC extension registers */ } +static CPAccessResult access_actlr_w(CPUARMState *env, const ARMCPRegInfo *r, + bool read) +{ + if (!read) { + int el = arm_current_el(env); + + /* Because ACTLR_EL2 is constant 0, writes below EL2 trap to EL2. */ + if (el < 2 && arm_is_el2_enabled(env)) { + return CP_ACCESS_TRAP_EL2; + } + /* Because ACTLR_EL3 is constant 0, writes below EL3 trap to EL3. */ + if (el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + return CP_ACCESS_TRAP_EL3; + } + } + return CP_ACCESS_OK; +} + static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { { .name = "ATCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 7, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + /* Traps and enables are the same as for TCR_EL1. */ + .accessfn = access_tvm_trvm, .fgt = FGT_TCR_EL1, }, { .name = "ATCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 15, .crm = 7, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR3_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, /* * Report CPUCFR_EL1.SCU as 1, as we do not implement the DSU * (and in particular its system registers). @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 4 }, { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 4, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010, + .accessfn = access_actlr_w }, { .name = "CPUPCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 8, .opc2 = 1, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUPWRCTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCDN_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCTL_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGF_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, }; static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> There is only one additional EL1 register modeled, which also needs to use access_actlr_w. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) static const ARMCPRegInfo neoverse_v1_cp_reginfo[] = { { .name = "CPUECTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 5, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUPPMCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 2, .opc2 = 0, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing external to the cpu, which is out of scope for QEMU. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* FEAT_SPE (Statistical Profiling Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, PMSVER, 0); + /* FEAT_TRBE (Trace Buffer Extension) */ + cpu->isar.id_aa64dfr0 = + FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEBUFFER, 0); /* FEAT_TRF (Self-hosted Trace Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEFILT, 0); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This feature allows the operating system to set TCR_ELx.HWU* to allow the implementation to use the PBHA bits from the block and page descriptors for for IMPLEMENTATION DEFINED purposes. Since QEMU has no need to use these bits, we may simply ignore them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HAFDBS (Hardware management of the access flag and dirty bit state) - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) +- FEAT_HPDS2 (Translation table page-based hardware attributes) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR1, HAFDBS, 2); /* FEAT_HAFDBS */ t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 3); /* FEAT_PAN3 */ t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> This is a mandatory feature for Armv8.1 architectures but we don't state the feature clearly in our emulation list. Also include FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org Cc: qemu-stable@nongnu.org Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org> [PMM: pluralize 'instructions' in docs] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CRC32 (CRC32 instructions) - FEAT_CSV2 (Cache speculation variant 2) - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ - t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); /* FEAT_CRC32 */ t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> i.MX7 IOMUX GPR device is not equivalent to i.MX6UL IOMUXC GPR device. In particular, register 22 is not present on i.MX6UL and this is actualy The only register that is really emulated in the i.MX7 IOMUX GPR device. Note: The i.MX6UL code is actually also implementing the IOMUX GPR device as an unimplemented device at the same bus adress and the 2 instantiations were actualy colliding. So we go back to the unimplemented device for now. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 48681bf51ee97646479bb261bee19abebbc8074e.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 -- hw/arm/fsl-imx6ul.c | 11 ----------- 2 files changed, 13 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx6ul_ccm.h" #include "hw/misc/imx6_src.h" #include "hw/misc/imx7_snvs.h" -#include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX6SRCState src; IMX7SNVSState snvs; IMXGPCv2State gpcv2; - IMX7GPRState gpr; IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); - /* - * GPR - */ - object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); - /* * GPIOs 1 to 5 */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOGn_IRQ[i])); } - /* - * GPR - */ - sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); - /* * SDMA */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for most i.MX6UL devices in i.MX6UL header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: d579043fbd4e4b490370783fda43fc02c8e9be75.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 156 +++++++++++++++++++++++++++++++----- hw/arm/fsl-imx6ul.c | 147 ++++++++++++++++++++++----------- 2 files changed, 232 insertions(+), 71 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX6UL "fsl-imx6ul" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX6ULState, FSL_IMX6UL) @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_ADCS = 2, FSL_IMX6UL_NUM_USB_PHYS = 2, FSL_IMX6UL_NUM_USBS = 2, + FSL_IMX6UL_NUM_SAIS = 3, + FSL_IMX6UL_NUM_CANS = 2, + FSL_IMX6UL_NUM_PWMS = 4, }; struct FslIMX6ULState { @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { enum FslIMX6ULMemoryMap { FSL_IMX6UL_MMDC_ADDR = 0x80000000, - FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX6UL_MMDC_SIZE = (2 * GiB), FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, - FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, - FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, - FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, - FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_MEM_SIZE = (256 * MiB), - /* AIPS-2 */ + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_ALIAS_SIZE = (128 * MiB), + + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_EIM_CS_SIZE = (128 * MiB), + + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_AES_ENCRYPT_SIZE = (1 * MiB), + + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_RX_SIZE = (32 * MiB), + + /* AIPS-2 Begin */ FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, FSL_IMX6UL_UART4_ADDR = 0x021F0000, FSL_IMX6UL_UART3_ADDR = 0x021EC000, FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_QSPI_SIZE = 0x500, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CTRL_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_CMP_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_SYS_CNT_RD_SIZE = (16 * KiB), + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_TZASC_SIZE = (16 * KiB), + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_PXP_SIZE = (16 * KiB), + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSI_SIZE = 0x100, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_CSU_SIZE = (16 * KiB), + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_OCOTP_CTRL_SIZE = (4 * KiB), + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_EIM_SIZE = 0x100, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_MMDC_CFG_SIZE = (4 * KiB), + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_ROMCP_SIZE = 0x300, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, FSL_IMX6UL_I2C2_ADDR = 0x021A4000, FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_ADCn_SIZE = 0x100, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, FSL_IMX6UL_USDHC1_ADDR = 0x02190000, - FSL_IMX6UL_SIM1_ADDR = 0x0218C000, - FSL_IMX6UL_ENET1_ADDR = 0x02188000, - FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, - FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, - FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, - FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, - FSL_IMX6UL_CAAM_ADDR = 0x02140000, - FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, - /* AIPS-1 */ + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_SIMn_SIZE = (16 * KiB), + + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB1_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_USB2_ADDR = 0x02184200, + + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_USBO2_PL301_SIZE = (16 * KiB), + + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_AIPS2_CFG_SIZE = 0x100, + + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_CAAM_SIZE = (16 * KiB), + + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + FSL_IMX6UL_A7MPCORE_DAP_SIZE = (4 * KiB), + /* AIPS-2 End */ + + /* AIPS-1 Begin */ FSL_IMX6UL_PWM8_ADDR = 0x020FC000, FSL_IMX6UL_PWM7_ADDR = 0x020F8000, FSL_IMX6UL_PWM6_ADDR = 0x020F4000, FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_SDMA_SIZE = 0x300, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_GPR_SIZE = 0x40, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_IOMUXC_SIZE = 0x700, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_USBPHY2_ADDR = 0x020CA000, - FSL_IMX6UL_USBPHY2_SIZE = (4 * 1024), FSL_IMX6UL_USBPHY1_ADDR = 0x020C9000, - FSL_IMX6UL_USBPHY1_SIZE = (4 * 1024), + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_ANALOG_SIZE = 0x300, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_KPP_SIZE = 0x10, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_SNVS_LP_SIZE = (16 * KiB), + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_CANn_SIZE = (4 * KiB), + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, FSL_IMX6UL_PWM3_ADDR = 0x02088000, FSL_IMX6UL_PWM2_ADDR = 0x02084000, FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_PWMn_SIZE = 0x20, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_AIPS1_CFG_SIZE = (16 * KiB), + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_BEE_SIZE = (16 * KiB), + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_TOUCH_CTRL_SIZE = 0x100, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_SPBA_SIZE = 0x100, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_ASRC_SIZE = 0x100, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, FSL_IMX6UL_SAI2_ADDR = 0x0202C000, FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_SAIn_SIZE = 0x200, + FSL_IMX6UL_UART8_ADDR = 0x02024000, FSL_IMX6UL_UART1_ADDR = 0x02020000, FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + FSL_IMX6UL_SPDIF_SIZE = 0x100, + /* AIPS-1 End */ + + FSL_IMX6UL_BCH_ADDR = 0x01808000, + FSL_IMX6UL_BCH_SIZE = 0x200, + + FSL_IMX6UL_GPMI_ADDR = 0x01806000, + FSL_IMX6UL_GPMI_SIZE = 0x200, FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, - FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + FSL_IMX6UL_APBH_DMA_SIZE = (4 * KiB), FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, - FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = (384 * KiB), + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, - FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_OCRAM_MEM_SIZE = (128 * KiB), + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, - FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_CAAM_MEM_SIZE = (32 * KiB), + FSL_IMX6UL_ROM_ADDR = 0x00000000, - FSL_IMX6UL_ROM_SIZE = 0x00018000, + FSL_IMX6UL_ROM_SIZE = (96 * KiB), }; enum FslIMX6ULIRQs { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * GPIOs 1 to 5 + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { snprintf(name, NAME_SIZE, "epit%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * eCSPI + * eCSPIs */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { snprintf(name, NAME_SIZE, "usbphy%d", i); object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); } + + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX6UL_A7MPCORE_DAP_SIZE); /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * GPIO + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * IOMUXC and IOMUXC_GPR + * IOMUXC */ - for (i = 0; i < 1; i++) { - static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { - FSL_IMX6UL_IOMUXC_ADDR, - FSL_IMX6UL_IOMUXC_GPR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); - } + create_unimplemented_device("iomuxc", FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_gpr", FSL_IMX6UL_IOMUXC_GPR_ADDR, + FSL_IMX6UL_IOMUXC_GPR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { FSL_IMX6UL_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENETn_TIMER_IRQ[i])); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { + static const hwaddr + FSL_IMX6UL_USB_PHYn_ADDR[FSL_IMX6UL_NUM_USB_PHYS] = { + FSL_IMX6UL_USBPHY1_ADDR, + FSL_IMX6UL_USBPHY2_ADDR, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, - FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000); + FSL_IMX6UL_USB_PHYn_ADDR[i]); } + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { + static const hwaddr FSL_IMX6UL_USB02_USBn_ADDR[FSL_IMX6UL_NUM_USBS] = { + FSL_IMX6UL_USBO2_USB1_ADDR, + FSL_IMX6UL_USBO2_USB2_ADDR, + }; + static const int FSL_IMX6UL_USBn_IRQ[] = { FSL_IMX6UL_USB1_IRQ, FSL_IMX6UL_USB2_IRQ, }; + sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, - FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200); + FSL_IMX6UL_USB02_USBn_ADDR[i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX6UL_USBn_IRQ[i])); } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { FSL_IMX6UL_WDOG1_IRQ, FSL_IMX6UL_WDOG2_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * SDMA */ - create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, + FSL_IMX6UL_SDMA_SIZE); /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000); - create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000); - create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_SAIS; i++) { + static const hwaddr FSL_IMX6UL_SAIn_ADDR[FSL_IMX6UL_NUM_SAIS] = { + FSL_IMX6UL_SAI1_ADDR, + FSL_IMX6UL_SAI2_ADDR, + FSL_IMX6UL_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX6UL_SAIn_ADDR[i], + FSL_IMX6UL_SAIn_SIZE); + } /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000); - create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000); - create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000); - create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_PWMS; i++) { + static const hwaddr FSL_IMX6UL_PWMn_ADDR[FSL_IMX6UL_NUM_PWMS] = { + FSL_IMX6UL_PWM1_ADDR, + FSL_IMX6UL_PWM2_ADDR, + FSL_IMX6UL_PWM3_ADDR, + FSL_IMX6UL_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX6UL_PWMn_ADDR[i], + FSL_IMX6UL_PWMn_SIZE); + } /* * Audio ASRC (asynchronous sample rate converter) */ - create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000); + create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, + FSL_IMX6UL_ASRC_SIZE); /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000); - create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_CANS; i++) { + static const hwaddr FSL_IMX6UL_CANn_ADDR[FSL_IMX6UL_NUM_CANS] = { + FSL_IMX6UL_CAN1_ADDR, + FSL_IMX6UL_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX6UL_CANn_ADDR[i], + FSL_IMX6UL_CANn_SIZE); + } /* * APHB_DMA @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) }; snprintf(name, NAME_SIZE, "adc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], + FSL_IMX6UL_ADCn_SIZE); } /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, + FSL_IMX6UL_LCDIF_SIZE); /* * ROM memory -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add 4 missing PWM devices Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 59e4dc56e14eccfefd379275ec19048dff9c10b3.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 +- hw/arm/fsl-imx6ul.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_USBS = 2, FSL_IMX6UL_NUM_SAIS = 3, FSL_IMX6UL_NUM_CANS = 2, - FSL_IMX6UL_NUM_PWMS = 4, + FSL_IMX6UL_NUM_PWMS = 8, }; struct FslIMX6ULState { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_PWM2_ADDR, FSL_IMX6UL_PWM3_ADDR, FSL_IMX6UL_PWM4_ADDR, + FSL_IMX6UL_PWM5_ADDR, + FSL_IMX6UL_PWM6_ADDR, + FSL_IMX6UL_PWM7_ADDR, + FSL_IMX6UL_PWM8_ADDR, }; snprintf(name, NAME_SIZE, "pwm%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, FSL_IMX6UL_LCDIF_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX6UL_CSU_ADDR, + FSL_IMX6UL_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX6UL_TZASC_ADDR, + FSL_IMX6UL_TZASC_SIZE); + /* * ROM memory */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for all i.MX7 devices in i.MX7 header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 59e195d33e4d486a8d131392acd46633c8c10ed7.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 330 ++++++++++++++++++++++++++++---------- hw/arm/fsl-imx7.c | 130 ++++++++++----- 2 files changed, 335 insertions(+), 125 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" -#include "hw/misc/imx6_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ #include "hw/usb/chipidea.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX7 "fsl-imx7" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX7State, FSL_IMX7) @@ -XXX,XX +XXX,XX @@ enum FslIMX7Configuration { FSL_IMX7_NUM_ECSPIS = 4, FSL_IMX7_NUM_USBS = 3, FSL_IMX7_NUM_ADCS = 2, + FSL_IMX7_NUM_SAIS = 3, + FSL_IMX7_NUM_CANS = 2, + FSL_IMX7_NUM_PWMS = 4, }; struct FslIMX7State { @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { enum FslIMX7MemoryMap { FSL_IMX7_MMDC_ADDR = 0x80000000, - FSL_IMX7_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX7_MMDC_SIZE = (2 * GiB), - FSL_IMX7_GPIO1_ADDR = 0x30200000, - FSL_IMX7_GPIO2_ADDR = 0x30210000, - FSL_IMX7_GPIO3_ADDR = 0x30220000, - FSL_IMX7_GPIO4_ADDR = 0x30230000, - FSL_IMX7_GPIO5_ADDR = 0x30240000, - FSL_IMX7_GPIO6_ADDR = 0x30250000, - FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX7_QSPI1_MEM_SIZE = (256 * MiB), - FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + FSL_IMX7_PCIE1_MEM_ADDR = 0x40000000, + FSL_IMX7_PCIE1_MEM_SIZE = (256 * MiB), - FSL_IMX7_WDOG1_ADDR = 0x30280000, - FSL_IMX7_WDOG2_ADDR = 0x30290000, - FSL_IMX7_WDOG3_ADDR = 0x302A0000, - FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_QSPI1_RX_BUF_ADDR = 0x34000000, + FSL_IMX7_QSPI1_RX_BUF_SIZE = (32 * MiB), - FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + /* PCIe Peripherals */ + FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_GPT1_ADDR = 0x302D0000, - FSL_IMX7_GPT2_ADDR = 0x302E0000, - FSL_IMX7_GPT3_ADDR = 0x302F0000, - FSL_IMX7_GPT4_ADDR = 0x30300000, + /* MMAP Peripherals */ + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x8000, - FSL_IMX7_IOMUXC_ADDR = 0x30330000, - FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, - FSL_IMX7_IOMUXCn_SIZE = 0x1000, + /* GPV configuration */ + FSL_IMX7_GPV6_ADDR = 0x32600000, + FSL_IMX7_GPV5_ADDR = 0x32500000, + FSL_IMX7_GPV4_ADDR = 0x32400000, + FSL_IMX7_GPV3_ADDR = 0x32300000, + FSL_IMX7_GPV2_ADDR = 0x32200000, + FSL_IMX7_GPV1_ADDR = 0x32100000, + FSL_IMX7_GPV0_ADDR = 0x32000000, + FSL_IMX7_GPVn_SIZE = (1 * MiB), - FSL_IMX7_OCOTP_ADDR = 0x30350000, - FSL_IMX7_OCOTP_SIZE = 0x10000, + /* Arm Peripherals */ + FSL_IMX7_A7MPCORE_ADDR = 0x31000000, - FSL_IMX7_ANALOG_ADDR = 0x30360000, - FSL_IMX7_SNVS_ADDR = 0x30370000, - FSL_IMX7_CCM_ADDR = 0x30380000, + /* AIPS-3 Begin */ - FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = 0x1000, + FSL_IMX7_ENET2_ADDR = 0x30BF0000, + FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ADC1_ADDR = 0x30610000, - FSL_IMX7_ADC2_ADDR = 0x30620000, - FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_SDMA_ADDR = 0x30BD0000, + FSL_IMX7_SDMA_SIZE = (4 * KiB), - FSL_IMX7_PWM1_ADDR = 0x30660000, - FSL_IMX7_PWM2_ADDR = 0x30670000, - FSL_IMX7_PWM3_ADDR = 0x30680000, - FSL_IMX7_PWM4_ADDR = 0x30690000, - FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_EIM_ADDR = 0x30BC0000, + FSL_IMX7_EIM_SIZE = (4 * KiB), - FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, - FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_QSPI_ADDR = 0x30BB0000, + FSL_IMX7_QSPI_SIZE = 0x8000, - FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_SIM2_ADDR = 0x30BA0000, + FSL_IMX7_SIM1_ADDR = 0x30B90000, + FSL_IMX7_SIMn_SIZE = (4 * KiB), + + FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_USDHC2_ADDR = 0x30B50000, + FSL_IMX7_USDHC1_ADDR = 0x30B40000, + + FSL_IMX7_USB3_ADDR = 0x30B30000, + FSL_IMX7_USBMISC3_ADDR = 0x30B30200, + FSL_IMX7_USB2_ADDR = 0x30B20000, + FSL_IMX7_USBMISC2_ADDR = 0x30B20200, + FSL_IMX7_USB1_ADDR = 0x30B10000, + FSL_IMX7_USBMISC1_ADDR = 0x30B10200, + FSL_IMX7_USBMISCn_SIZE = 0x200, + + FSL_IMX7_USB_PL301_ADDR = 0x30AD0000, + FSL_IMX7_USB_PL301_SIZE = (64 * KiB), + + FSL_IMX7_SEMAPHORE_HS_ADDR = 0x30AC0000, + FSL_IMX7_SEMAPHORE_HS_SIZE = (64 * KiB), + + FSL_IMX7_MUB_ADDR = 0x30AB0000, + FSL_IMX7_MUA_ADDR = 0x30AA0000, + FSL_IMX7_MUn_SIZE = (KiB), + + FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART6_ADDR = 0x30A80000, + FSL_IMX7_UART5_ADDR = 0x30A70000, + FSL_IMX7_UART4_ADDR = 0x30A60000, + + FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_I2C3_ADDR = 0x30A40000, + FSL_IMX7_I2C2_ADDR = 0x30A30000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, + + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CANn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS3_CONF_ADDR = 0x309F0000, + FSL_IMX7_AIPS3_CONF_SIZE = (64 * KiB), FSL_IMX7_CAAM_ADDR = 0x30900000, - FSL_IMX7_CAAM_SIZE = 0x40000, + FSL_IMX7_CAAM_SIZE = (256 * KiB), - FSL_IMX7_CAN1_ADDR = 0x30A00000, - FSL_IMX7_CAN2_ADDR = 0x30A10000, - FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_SPBA_ADDR = 0x308F0000, + FSL_IMX7_SPBA_SIZE = (4 * KiB), - FSL_IMX7_I2C1_ADDR = 0x30A20000, - FSL_IMX7_I2C2_ADDR = 0x30A30000, - FSL_IMX7_I2C3_ADDR = 0x30A40000, - FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_SAI3_ADDR = 0x308C0000, + FSL_IMX7_SAI2_ADDR = 0x308B0000, + FSL_IMX7_SAI1_ADDR = 0x308A0000, + FSL_IMX7_SAIn_SIZE = (4 * KiB), - FSL_IMX7_ECSPI1_ADDR = 0x30820000, - FSL_IMX7_ECSPI2_ADDR = 0x30830000, - FSL_IMX7_ECSPI3_ADDR = 0x30840000, - FSL_IMX7_ECSPI4_ADDR = 0x30630000, - - FSL_IMX7_LCDIF_ADDR = 0x30730000, - FSL_IMX7_LCDIF_SIZE = 0x1000, - - FSL_IMX7_UART1_ADDR = 0x30860000, + FSL_IMX7_UART3_ADDR = 0x30880000, /* * Some versions of the reference manual claim that UART2 is @ * 0x30870000, but experiments with HW + DT files in upstream @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { * actually located @ 0x30890000 */ FSL_IMX7_UART2_ADDR = 0x30890000, - FSL_IMX7_UART3_ADDR = 0x30880000, - FSL_IMX7_UART4_ADDR = 0x30A60000, - FSL_IMX7_UART5_ADDR = 0x30A70000, - FSL_IMX7_UART6_ADDR = 0x30A80000, - FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART1_ADDR = 0x30860000, - FSL_IMX7_SAI1_ADDR = 0x308A0000, - FSL_IMX7_SAI2_ADDR = 0x308B0000, - FSL_IMX7_SAI3_ADDR = 0x308C0000, - FSL_IMX7_SAIn_SIZE = 0x10000, + FSL_IMX7_ECSPI3_ADDR = 0x30840000, + FSL_IMX7_ECSPI2_ADDR = 0x30830000, + FSL_IMX7_ECSPI1_ADDR = 0x30820000, + FSL_IMX7_ECSPIn_SIZE = (4 * KiB), - FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ENET2_ADDR = 0x30BF0000, + /* AIPS-3 End */ - FSL_IMX7_USB1_ADDR = 0x30B10000, - FSL_IMX7_USBMISC1_ADDR = 0x30B10200, - FSL_IMX7_USB2_ADDR = 0x30B20000, - FSL_IMX7_USBMISC2_ADDR = 0x30B20200, - FSL_IMX7_USB3_ADDR = 0x30B30000, - FSL_IMX7_USBMISC3_ADDR = 0x30B30200, - FSL_IMX7_USBMISCn_SIZE = 0x200, + /* AIPS-2 Begin */ - FSL_IMX7_USDHC1_ADDR = 0x30B40000, - FSL_IMX7_USDHC2_ADDR = 0x30B50000, - FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_AXI_DEBUG_MON_ADDR = 0x307E0000, + FSL_IMX7_AXI_DEBUG_MON_SIZE = (64 * KiB), - FSL_IMX7_SDMA_ADDR = 0x30BD0000, - FSL_IMX7_SDMA_SIZE = 0x1000, + FSL_IMX7_PERFMON2_ADDR = 0x307D0000, + FSL_IMX7_PERFMON1_ADDR = 0x307C0000, + FSL_IMX7_PERFMONn_SIZE = (64 * KiB), + + FSL_IMX7_DDRC_ADDR = 0x307A0000, + FSL_IMX7_DDRC_SIZE = (4 * KiB), + + FSL_IMX7_DDRC_PHY_ADDR = 0x30790000, + FSL_IMX7_DDRC_PHY_SIZE = (4 * KiB), + + FSL_IMX7_TZASC_ADDR = 0x30780000, + FSL_IMX7_TZASC_SIZE = (64 * KiB), + + FSL_IMX7_MIPI_DSI_ADDR = 0x30760000, + FSL_IMX7_MIPI_DSI_SIZE = (4 * KiB), + + FSL_IMX7_MIPI_CSI_ADDR = 0x30750000, + FSL_IMX7_MIPI_CSI_SIZE = 0x4000, + + FSL_IMX7_LCDIF_ADDR = 0x30730000, + FSL_IMX7_LCDIF_SIZE = 0x8000, + + FSL_IMX7_CSI_ADDR = 0x30710000, + FSL_IMX7_CSI_SIZE = (4 * KiB), + + FSL_IMX7_PXP_ADDR = 0x30700000, + FSL_IMX7_PXP_SIZE = 0x4000, + + FSL_IMX7_EPDC_ADDR = 0x306F0000, + FSL_IMX7_EPDC_SIZE = (4 * KiB), + + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = (4 * KiB), + + FSL_IMX7_SYSCNT_CTRL_ADDR = 0x306C0000, + FSL_IMX7_SYSCNT_CMP_ADDR = 0x306B0000, + FSL_IMX7_SYSCNT_RD_ADDR = 0x306A0000, + + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWMn_SIZE = (4 * KiB), + + FSL_IMX7_FlEXTIMER2_ADDR = 0x30650000, + FSL_IMX7_FlEXTIMER1_ADDR = 0x30640000, + FSL_IMX7_FLEXTIMERn_SIZE = (4 * KiB), + + FSL_IMX7_ECSPI4_ADDR = 0x30630000, + + FSL_IMX7_ADC2_ADDR = 0x30620000, + FSL_IMX7_ADC1_ADDR = 0x30610000, + FSL_IMX7_ADCn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS2_CONF_ADDR = 0x305F0000, + FSL_IMX7_AIPS2_CONF_SIZE = (64 * KiB), + + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + + FSL_IMX7_CSU_ADDR = 0x303E0000, + FSL_IMX7_CSU_SIZE = (64 * KiB), + + FSL_IMX7_RDC_ADDR = 0x303D0000, + FSL_IMX7_RDC_SIZE = (4 * KiB), + + FSL_IMX7_SEMAPHORE2_ADDR = 0x303C0000, + FSL_IMX7_SEMAPHORE1_ADDR = 0x303B0000, + FSL_IMX7_SEMAPHOREn_SIZE = (4 * KiB), + + FSL_IMX7_GPC_ADDR = 0x303A0000, + + FSL_IMX7_SRC_ADDR = 0x30390000, + FSL_IMX7_SRC_SIZE = (4 * KiB), + + FSL_IMX7_CCM_ADDR = 0x30380000, + + FSL_IMX7_SNVS_HP_ADDR = 0x30370000, + + FSL_IMX7_ANALOG_ADDR = 0x30360000, + + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + + FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, + FSL_IMX7_IOMUXC_GPR_SIZE = (4 * KiB), + + FSL_IMX7_IOMUXC_ADDR = 0x30330000, + FSL_IMX7_IOMUXC_SIZE = (4 * KiB), + + FSL_IMX7_KPP_ADDR = 0x30320000, + FSL_IMX7_KPP_SIZE = (4 * KiB), + + FSL_IMX7_ROMCP_ADDR = 0x30310000, + FSL_IMX7_ROMCP_SIZE = (4 * KiB), + + FSL_IMX7_GPT4_ADDR = 0x30300000, + FSL_IMX7_GPT3_ADDR = 0x302F0000, + FSL_IMX7_GPT2_ADDR = 0x302E0000, + FSL_IMX7_GPT1_ADDR = 0x302D0000, + + FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + FSL_IMX7_IOMUXC_LPSR_SIZE = (4 * KiB), + + FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_WDOG3_ADDR = 0x302A0000, + FSL_IMX7_WDOG2_ADDR = 0x30290000, + FSL_IMX7_WDOG1_ADDR = 0x30280000, + + FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + + FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_GPIO6_ADDR = 0x30250000, + FSL_IMX7_GPIO5_ADDR = 0x30240000, + FSL_IMX7_GPIO4_ADDR = 0x30230000, + FSL_IMX7_GPIO3_ADDR = 0x30220000, + FSL_IMX7_GPIO2_ADDR = 0x30210000, + FSL_IMX7_GPIO1_ADDR = 0x30200000, + + FSL_IMX7_AIPS1_CONF_ADDR = 0x301F0000, + FSL_IMX7_AIPS1_CONF_SIZE = (64 * KiB), - FSL_IMX7_A7MPCORE_ADDR = 0x31000000, FSL_IMX7_A7MPCORE_DAP_ADDR = 0x30000000, + FSL_IMX7_A7MPCORE_DAP_SIZE = (1 * MiB), - FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, + /* AIPS-1 End */ - FSL_IMX7_GPR_ADDR = 0x30340000, + FSL_IMX7_EIM_CS0_ADDR = 0x28000000, + FSL_IMX7_EIM_CS0_SIZE = (128 * MiB), - FSL_IMX7_DMA_APBH_ADDR = 0x33000000, - FSL_IMX7_DMA_APBH_SIZE = 0x2000, + FSL_IMX7_OCRAM_PXP_ADDR = 0x00940000, + FSL_IMX7_OCRAM_PXP_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_EPDC_ADDR = 0x00920000, + FSL_IMX7_OCRAM_EPDC_SIZE = (128 * KiB), + + FSL_IMX7_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX7_OCRAM_MEM_SIZE = (128 * KiB), + + FSL_IMX7_TCMU_ADDR = 0x00800000, + FSL_IMX7_TCMU_SIZE = (32 * KiB), + + FSL_IMX7_TCML_ADDR = 0x007F8000, + FSL_IMX7_TCML_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_S_ADDR = 0x00180000, + FSL_IMX7_OCRAM_S_SIZE = (32 * KiB), + + FSL_IMX7_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX7_CAAM_MEM_SIZE = (32 * KiB), + + FSL_IMX7_ROM_ADDR = 0x00000000, + FSL_IMX7_ROM_SIZE = (96 * KiB), }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) char name[NAME_SIZE]; int i; + /* + * CPUs + */ for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX7_NUM_CPUS); i++) { snprintf(name, NAME_SIZE, "cpu%d", i); object_initialize_child(obj, name, &s->cpu[i], @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) TYPE_A15MPCORE_PRIV); /* - * GPIOs 1 to 7 + * GPIOs */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } - + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); + /* + * PCIE + */ object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) return; } + /* + * CPUs + */ for (i = 0; i < smp_cpus; i++) { o = OBJECT(&s->cpu[i]); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX7_A7MPCORE_DAP_SIZE); /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPTn_IRQ[i])); } + /* + * GPIOs + */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = { FSL_IMX7_GPIO1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * IOMUXC and IOMUXC_LPSR */ - for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) { - static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = { - FSL_IMX7_IOMUXC_ADDR, - FSL_IMX7_IOMUXC_LPSR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i], - FSL_IMX7_IOMUXCn_SIZE); - } + create_unimplemented_device("iomuxc", FSL_IMX7_IOMUXC_ADDR, + FSL_IMX7_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_lspr", FSL_IMX7_IOMUXC_LPSR_ADDR, + FSL_IMX7_IOMUXC_LPSR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = { FSL_IMX7_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_SPIn_IRQ[i])); } + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = { FSL_IMX7_I2C1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * SNVS */ sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_HP_ADDR); /* * SRC @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_PWMS; i++) { + static const hwaddr FSL_IMX7_PWMn_ADDR[FSL_IMX7_NUM_PWMS] = { + FSL_IMX7_PWM1_ADDR, + FSL_IMX7_PWM2_ADDR, + FSL_IMX7_PWM3_ADDR, + FSL_IMX7_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX7_PWMn_ADDR[i], + FSL_IMX7_PWMn_SIZE); + } /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); - create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_CANS; i++) { + static const hwaddr FSL_IMX7_CANn_ADDR[FSL_IMX7_NUM_CANS] = { + FSL_IMX7_CAN1_ADDR, + FSL_IMX7_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX7_CANn_ADDR[i], + FSL_IMX7_CANn_SIZE); + } /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX7_SAI1_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI2_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI3_ADDR, FSL_IMX7_SAIn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_SAIS; i++) { + static const hwaddr FSL_IMX7_SAIn_ADDR[FSL_IMX7_NUM_SAIS] = { + FSL_IMX7_SAI1_ADDR, + FSL_IMX7_SAI2_ADDR, + FSL_IMX7_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX7_SAIn_ADDR[i], + FSL_IMX7_SAIn_SIZE); + } /* * OCOTP @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, FSL_IMX7_OCOTP_SIZE); + /* + * GPR + */ sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_IOMUXC_GPR_ADDR); + /* + * PCIE + */ sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ); sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq); - + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = { FSL_IMX7_USBMISC1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add various memory segments - OCRAM - OCRAM EPDC - OCRAM PXP - OCRAM S - ROM - CAAM Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: f887a3483996ba06d40bd62ffdfb0ecf68621987.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 7 +++++ hw/arm/fsl-imx7.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7GPRState gpr; ChipideaState usb[FSL_IMX7_NUM_USBS]; DesignwarePCIEHost pcie; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_epdc; + MemoryRegion ocram_pxp; + MemoryRegion ocram_s; + uint32_t phy_num[FSL_IMX7_NUM_ETHS]; bool phy_connected[FSL_IMX7_NUM_ETHS]; }; diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX7_CSU_ADDR, + FSL_IMX7_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX7_TZASC_ADDR, + FSL_IMX7_TZASC_SIZE); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx7.ocram", + FSL_IMX7_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * OCRAM EPDC memory + */ + memory_region_init_ram(&s->ocram_epdc, NULL, "imx7.ocram_epdc", + FSL_IMX7_OCRAM_EPDC_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_EPDC_ADDR, + &s->ocram_epdc); + + /* + * OCRAM PXP memory + */ + memory_region_init_ram(&s->ocram_pxp, NULL, "imx7.ocram_pxp", + FSL_IMX7_OCRAM_PXP_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_PXP_ADDR, + &s->ocram_pxp); + + /* + * OCRAM_S memory + */ + memory_region_init_ram(&s->ocram_s, NULL, "imx7.ocram_s", + FSL_IMX7_OCRAM_S_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_S_ADDR, + &s->ocram_s); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, OBJECT(dev), "imx7.rom", + FSL_IMX7_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, OBJECT(dev), "imx7.caam", + FSL_IMX7_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_CAAM_MEM_ADDR, + &s->caam); } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The SRC device is normally used to start the secondary CPU. When running Linux directly, QEMU is emulating a PSCI interface that UBOOT is installing at boot time and therefore the fact that the SRC device is unimplemented is hidden as Qemu respond directly to PSCI requets without using the SRC device. But if you try to run a more bare metal application (maybe uboot itself), then it is not possible to start the secondary CPU as the SRC is an unimplemented device. This patch adds the ability to start the secondary CPU through the SRC device so that you can use this feature in bare metal applications. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +- include/hw/misc/imx7_src.h | 66 +++++++++ hw/arm/fsl-imx7.c | 8 +- hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 6 files changed, 356 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" +#include "hw/misc/imx7_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7CCMState ccm; IMX7AnalogState analog; IMX7SNVSState snvs; + IMX7SRCState src; IMXGPCv2State gpcv2; IMXSPIState spi[FSL_IMX7_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX7_NUM_I2CS]; @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = (4 * KiB), FSL_IMX7_CCM_ADDR = 0x30380000, diff --git a/include/hw/misc/imx7_src.h b/include/hw/misc/imx7_src.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_src.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (C) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SRC_H +#define IMX7_SRC_H + +#include "hw/sysbus.h" +#include "qemu/bitops.h" +#include "qom/object.h" + +#define SRC_SCR 0 +#define SRC_A7RCR0 1 +#define SRC_A7RCR1 2 +#define SRC_M4RCR 3 +#define SRC_ERCR 5 +#define SRC_HSICPHY_RCR 7 +#define SRC_USBOPHY1_RCR 8 +#define SRC_USBOPHY2_RCR 9 +#define SRC_MPIPHY_RCR 10 +#define SRC_PCIEPHY_RCR 11 +#define SRC_SBMR1 22 +#define SRC_SRSR 23 +#define SRC_SISR 26 +#define SRC_SIMR 27 +#define SRC_SBMR2 28 +#define SRC_GPR1 29 +#define SRC_GPR2 30 +#define SRC_GPR3 31 +#define SRC_GPR4 32 +#define SRC_GPR5 33 +#define SRC_GPR6 34 +#define SRC_GPR7 35 +#define SRC_GPR8 36 +#define SRC_GPR9 37 +#define SRC_GPR10 38 +#define SRC_MAX 39 + +/* SRC_A7SCR1 */ +#define R_CORE1_ENABLE_SHIFT 1 +#define R_CORE1_ENABLE_LENGTH 1 +/* SRC_A7SCR0 */ +#define R_CORE1_RST_SHIFT 5 +#define R_CORE1_RST_LENGTH 1 +#define R_CORE0_RST_SHIFT 4 +#define R_CORE0_RST_LENGTH 1 + +#define TYPE_IMX7_SRC "imx7.src" +OBJECT_DECLARE_SIMPLE_TYPE(IMX7SRCState, IMX7_SRC) + +struct IMX7SRCState { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t regs[SRC_MAX]; +}; + +#endif /* IMX7_SRC_H */ diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * SRC + */ + object_initialize_child(obj, "src", &s->src, TYPE_IMX7_SRC); + /* * ECSPIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * SRC */ - create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX7_SRC_ADDR); /* * Watchdogs diff --git a/hw/misc/imx7_src.c b/hw/misc/imx7_src.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_src.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_src.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" +#include "qemu/module.h" +#include "target/arm/arm-powerctl.h" +#include "hw/core/cpu.h" +#include "hw/registerfields.h" + +#include "trace.h" + +static const char *imx7_src_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case SRC_SCR: + return "SRC_SCR"; + case SRC_A7RCR0: + return "SRC_A7RCR0"; + case SRC_A7RCR1: + return "SRC_A7RCR1"; + case SRC_M4RCR: + return "SRC_M4RCR"; + case SRC_ERCR: + return "SRC_ERCR"; + case SRC_HSICPHY_RCR: + return "SRC_HSICPHY_RCR"; + case SRC_USBOPHY1_RCR: + return "SRC_USBOPHY1_RCR"; + case SRC_USBOPHY2_RCR: + return "SRC_USBOPHY2_RCR"; + case SRC_PCIEPHY_RCR: + return "SRC_PCIEPHY_RCR"; + case SRC_SBMR1: + return "SRC_SBMR1"; + case SRC_SRSR: + return "SRC_SRSR"; + case SRC_SISR: + return "SRC_SISR"; + case SRC_SIMR: + return "SRC_SIMR"; + case SRC_SBMR2: + return "SRC_SBMR2"; + case SRC_GPR1: + return "SRC_GPR1"; + case SRC_GPR2: + return "SRC_GPR2"; + case SRC_GPR3: + return "SRC_GPR3"; + case SRC_GPR4: + return "SRC_GPR4"; + case SRC_GPR5: + return "SRC_GPR5"; + case SRC_GPR6: + return "SRC_GPR6"; + case SRC_GPR7: + return "SRC_GPR7"; + case SRC_GPR8: + return "SRC_GPR8"; + case SRC_GPR9: + return "SRC_GPR9"; + case SRC_GPR10: + return "SRC_GPR10"; + default: + sprintf(unknown, "%u ?", reg); + return unknown; + } +} + +static const VMStateDescription vmstate_imx7_src = { + .name = TYPE_IMX7_SRC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_src_reset(DeviceState *dev) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + /* Set reset values */ + s->regs[SRC_SCR] = 0xA0; + s->regs[SRC_SRSR] = 0x1; + s->regs[SRC_SIMR] = 0x1F; +} + +static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + + if (index < SRC_MAX) { + value = s->regs[index]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + } + + trace_imx7_src_read(imx7_src_reg_name(index), value); + + return value; +} + + +/* + * The reset is asynchronous so we need to defer clearing the reset + * bit until the work is completed. + */ + +struct SRCSCRResetInfo { + IMX7SRCState *s; + uint32_t reset_bit; +}; + +static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) +{ + struct SRCSCRResetInfo *ri = data.host_ptr; + IMX7SRCState *s = ri->s; + + assert(qemu_mutex_iothread_locked()); + + s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + g_free(ri); +} + +static void imx7_defer_clear_reset_bit(uint32_t cpuid, + IMX7SRCState *s, + uint32_t reset_shift) +{ + struct SRCSCRResetInfo *ri; + CPUState *cpu = arm_get_cpu_by_id(cpuid); + + if (!cpu) { + return; + } + + ri = g_new(struct SRCSCRResetInfo, 1); + ri->s = s; + ri->reset_bit = reset_shift; + + async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); +} + + +static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + long unsigned int change_mask; + uint32_t current_value = value; + + if (index >= SRC_MAX) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + return; + } + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + change_mask = s->regs[index] ^ (uint32_t)current_value; + + switch (index) { + case SRC_A7RCR0: + if (FIELD_EX32(change_mask, CORE0, RST)) { + arm_reset_cpu(0); + imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); + } + if (FIELD_EX32(change_mask, CORE1, RST)) { + arm_reset_cpu(1); + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + } + s->regs[index] = current_value; + break; + case SRC_A7RCR1: + /* + * On real hardware when the system reset controller starts a + * secondary CPU it runs through some boot ROM code which reads + * the SRC_GPRX registers controlling the start address and branches + * to it. + * Here we are taking a short cut and branching directly to the + * requested address (we don't want to run the boot ROM code inside + * QEMU) + */ + if (FIELD_EX32(change_mask, CORE1, ENABLE)) { + if (FIELD_EX32(current_value, CORE1, ENABLE)) { + /* CORE 1 is brought up */ + arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], + 3, false); + } else { + /* CORE 1 is shut down */ + arm_set_cpu_off(1); + } + /* We clear the reset bits as the processor changed state */ + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + clear_bit(R_CORE1_RST_SHIFT, &change_mask); + } + s->regs[index] = current_value; + break; + default: + s->regs[index] = current_value; + break; + } +} + +static const struct MemoryRegionOps imx7_src_ops = { + .read = imx7_src_read, + .write = imx7_src_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_src_realize(DeviceState *dev, Error **errp) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, + TYPE_IMX7_SRC, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); +} + +static void imx7_src_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx7_src_realize; + dc->reset = imx7_src_reset; + dc->vmsd = &vmstate_imx7_src; + dc->desc = "i.MX6 System Reset Controller"; +} + +static const TypeInfo imx7_src_info = { + .name = TYPE_IMX7_SRC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SRCState), + .class_init = imx7_src_class_init, +}; + +static void imx7_src_register_types(void) +{ + type_register_static(&imx7_src_info); +} + +type_init(imx7_src_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( 'imx6_src.c', 'imx6ul_ccm.c', 'imx7_ccm.c', + 'imx7_src.c', 'imx7_gpr.c', 'imx7_snvs.c', 'imx_ccm.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d" ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +# imx7_src.c +imx7_src_read(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +imx7_src_write(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 + # iotkit-sysinfo.c iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.34.1 The architecture requires (R_TYTWB) that an attempt to return from EL3 when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This enforces that the CPU can't ever be executing below EL3 with the NSE,NS bits indicating an invalid security state.) We were missing this check; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230807150618.101357-1-peter.maydell@linaro.org --- target/arm/tcg/helper-a64.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) spsr &= ~PSTATE_SS; } + /* + * FEAT_RME forbids return from EL3 with an invalid security state. + * We don't need an explicit check for FEAT_RME here because we enforce + * in scr_write() that you can't set the NSE bit without it. + */ + if (cur_el == 3 && (env->cp15.scr_el3 & (SCR_NS | SCR_NSE)) == SCR_NSE) { + goto illegal_return; + } + new_el = el_from_spsr(spsr); if (new_el == -1) { goto illegal_return; -- 2.34.1 In the m48t59 device we almost always use 64-bit arithmetic when dealing with time_t deltas. The one exception is in set_alarm(), which currently uses a plain 'int' to hold the difference between two time_t values. Switch to int64_t instead to avoid any possible overflow issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/m48t59.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/rtc/m48t59.c b/hw/rtc/m48t59.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/m48t59.c +++ b/hw/rtc/m48t59.c @@ -XXX,XX +XXX,XX @@ static void alarm_cb (void *opaque) static void set_alarm(M48t59State *NVRAM) { - int diff; + int64_t diff; if (NVRAM->alrm_timer != NULL) { timer_del(NVRAM->alrm_timer); diff = qemu_timedate_diff(&NVRAM->alarm) - NVRAM->time_offset; -- 2.34.1 In the twl92230 device, use int64_t for the two state fields sec_offset and alm_sec, because we set these to values that are either time_t or differences between two time_t values. These fields aren't saved in vmstate anywhere, so we can safely widen them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/twl92230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/rtc/twl92230.c b/hw/rtc/twl92230.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/twl92230.c +++ b/hw/rtc/twl92230.c @@ -XXX,XX +XXX,XX @@ struct MenelausState { struct tm tm; struct tm new; struct tm alm; - int sec_offset; - int alm_sec; + int64_t sec_offset; + int64_t alm_sec; int next_comp; } rtc; uint16_t rtc_next_vmstate; -- 2.34.1 In the aspeed_rtc device we store a difference between two time_t values in an 'int'. This is not really correct when time_t could be 64 bits. Enlarge the field to 'int64_t'. This is a migration compatibility break for the aspeed boards. While we are changing the vmstate, remove the accidental duplicate of the offset field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> --- include/hw/rtc/aspeed_rtc.h | 2 +- hw/rtc/aspeed_rtc.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/hw/rtc/aspeed_rtc.h b/include/hw/rtc/aspeed_rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/rtc/aspeed_rtc.h +++ b/include/hw/rtc/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ struct AspeedRtcState { qemu_irq irq; uint32_t reg[0x18]; - int offset; + int64_t offset; }; diff --git a/hw/rtc/aspeed_rtc.c b/hw/rtc/aspeed_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/aspeed_rtc.c +++ b/hw/rtc/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_rtc_ops = { static const VMStateDescription vmstate_aspeed_rtc = { .name = TYPE_ASPEED_RTC, - .version_id = 1, + .version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), - VMSTATE_INT32(offset, AspeedRtcState), - VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT64(offset, AspeedRtcState), VMSTATE_END_OF_LIST() } }; -- 2.34.1 The functions qemu_get_timedate() and qemu_timedate_diff() take and return a time offset as an integer. Coverity points out that means that when an RTC device implementation holds an offset as a time_t, as the m48t59 does, the time_t will get truncated. (CID 1507157, 1517772). The functions work with time_t internally, so make them use that type in their APIs. Note that this won't help any Y2038 issues where either the device model itself is keeping the offset in a 32-bit integer, or where the hardware under emulation has Y2038 or other rollover problems. If we missed any cases of the former then hopefully Coverity will warn us about them since after this patch we'd be truncating a time_t in assignments from qemu_timedate_diff().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- include/sysemu/rtc.h | 4 ++-- softmmu/rtc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sysemu/rtc.h b/include/sysemu/rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/rtc.h +++ b/include/sysemu/rtc.h @@ -XXX,XX +XXX,XX @@ * The behaviour of the clock whose value this function returns will * depend on the -rtc command line option passed by the user. */ -void qemu_get_timedate(struct tm *tm, int offset); +void qemu_get_timedate(struct tm *tm, time_t offset); /** * qemu_timedate_diff: Return difference between a struct tm and the RTC @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset); * a timestamp one hour further ahead than the current RTC time * then this function will return 3600. */ -int qemu_timedate_diff(struct tm *tm); +time_t qemu_timedate_diff(struct tm *tm); #endif diff --git a/softmmu/rtc.c b/softmmu/rtc.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/rtc.c +++ b/softmmu/rtc.c @@ -XXX,XX +XXX,XX @@ static time_t qemu_ref_timedate(QEMUClockType clock) return value; } -void qemu_get_timedate(struct tm *tm, int offset) +void qemu_get_timedate(struct tm *tm, time_t offset) { time_t ti = qemu_ref_timedate(rtc_clock); @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset) } } -int qemu_timedate_diff(struct tm *tm) +time_t qemu_timedate_diff(struct tm *tm) { time_t seconds; -- 2.34.1 Where architecturally one ARM_FEATURE_X flag implies another ARM_FEATURE_Y, we allow the CPU init function to only set X, and then set Y for it. Currently we do this in two places -- we set a few flags in arm_cpu_post_init() because we need them to decide which properties to create on the CPU object, and then we do the rest in arm_cpu_realizefn(). However, this is fragile, because it's easy to add a new property and not notice that this means that an X-implies-Y check now has to move from realize to post-init. As a specific example, the pmsav7-dregion property is conditional on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and rely on V8-implies-V7, which doesn't happen until the realizefn. Move all of these X-implies-Y checks into a new function, which we call at the top of arm_cpu_post_init(), so the feature bits are available at that point. This does now give us the reverse issue, that if there's a feature bit which is enabled or disabled by the setting of a property then then X-implies-Y features that are dependent on that property need to be in realize, not in this new function. But the only one of those is the "EL3 implies VBAR" which is already in the right place, so putting things this way round seems better to me. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org --- target/arm/cpu.c | 179 +++++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 82 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ unsigned int gt_cntfrq_period_ns(ARMCPU *cpu) NANOSECONDS_PER_SECOND / cpu->gt_cntfrq_hz : 1; } +static void arm_cpu_propagate_feature_implications(ARMCPU *cpu) +{ + CPUARMState *env = &cpu->env; + bool no_aa32 = false; + + /* + * Some features automatically imply others: set the feature + * bits explicitly for these cases. + */ + + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_PMSA); + } + + if (arm_feature(env, ARM_FEATURE_V8)) { + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V7); + } else { + set_feature(env, ARM_FEATURE_V7VE); + } + } + + /* + * There exist AArch64 cpus without AArch32 support. When KVM + * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. + * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. + * As a general principle, we also do not make ID register + * consistency checks anywhere unless using TCG, because only + * for TCG would a consistency-check failure be a QEMU bug. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); + } + + if (arm_feature(env, ARM_FEATURE_V7VE)) { + /* + * v7 Virtualization Extensions. In real hardware this implies + * EL2 and also the presence of the Security Extensions. + * For QEMU, for backwards-compatibility we implement some + * CPUs or CPU configs which have no actual EL2 or EL3 but do + * include the various other features that V7VE implies. + * Presence of EL2 itself is ARM_FEATURE_EL2, and of the + * Security Extensions is ARM_FEATURE_EL3. + */ + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_arm_div, cpu)); + set_feature(env, ARM_FEATURE_LPAE); + set_feature(env, ARM_FEATURE_V7); + } + if (arm_feature(env, ARM_FEATURE_V7)) { + set_feature(env, ARM_FEATURE_VAPA); + set_feature(env, ARM_FEATURE_THUMB2); + set_feature(env, ARM_FEATURE_MPIDR); + if (!arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V6K); + } else { + set_feature(env, ARM_FEATURE_V6); + } + + /* + * Always define VBAR for V7 CPUs even if it doesn't exist in + * non-EL3 configs. This is needed by some legacy boards. + */ + set_feature(env, ARM_FEATURE_VBAR); + } + if (arm_feature(env, ARM_FEATURE_V6K)) { + set_feature(env, ARM_FEATURE_V6); + set_feature(env, ARM_FEATURE_MVFR); + } + if (arm_feature(env, ARM_FEATURE_V6)) { + set_feature(env, ARM_FEATURE_V5); + if (!arm_feature(env, ARM_FEATURE_M)) { + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_jazelle, cpu)); + set_feature(env, ARM_FEATURE_AUXCR); + } + } + if (arm_feature(env, ARM_FEATURE_V5)) { + set_feature(env, ARM_FEATURE_V4T); + } + if (arm_feature(env, ARM_FEATURE_LPAE)) { + set_feature(env, ARM_FEATURE_V7MP); + } + if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { + set_feature(env, ARM_FEATURE_CBAR); + } + if (arm_feature(env, ARM_FEATURE_THUMB2) && + !arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_THUMB_DSP); + } +} + void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - /* M profile implies PMSA. We have to do this here rather than - * in realize with the other feature-implication checks because - * we look at the PMSA bit to see if we should add some properties. + /* + * Some features imply others. Figure this out now, because we + * are going to look at the feature bits in deciding which + * properties to add. */ - if (arm_feature(&cpu->env, ARM_FEATURE_M)) { - set_feature(&cpu->env, ARM_FEATURE_PMSA); - } + arm_cpu_propagate_feature_implications(cpu); if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) CPUARMState *env = &cpu->env; int pagebits; Error *local_err = NULL; - bool no_aa32 = false; /* Use pc-relative instructions in system-mode */ #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->isar.id_isar3 = u; } - /* Some features automatically imply others: */ - if (arm_feature(env, ARM_FEATURE_V8)) { - if (arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V7); - } else { - set_feature(env, ARM_FEATURE_V7VE); - } - } - - /* - * There exist AArch64 cpus without AArch32 support. When KVM - * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. - * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. - * As a general principle, we also do not make ID register - * consistency checks anywhere unless using TCG, because only - * for TCG would a consistency-check failure be a QEMU bug. - */ - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { - no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); - } - - if (arm_feature(env, ARM_FEATURE_V7VE)) { - /* v7 Virtualization Extensions. In real hardware this implies - * EL2 and also the presence of the Security Extensions. - * For QEMU, for backwards-compatibility we implement some - * CPUs or CPU configs which have no actual EL2 or EL3 but do - * include the various other features that V7VE implies. - * Presence of EL2 itself is ARM_FEATURE_EL2, and of the - * Security Extensions is ARM_FEATURE_EL3. - */ - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_arm_div, cpu)); - set_feature(env, ARM_FEATURE_LPAE); - set_feature(env, ARM_FEATURE_V7); - } - if (arm_feature(env, ARM_FEATURE_V7)) { - set_feature(env, ARM_FEATURE_VAPA); - set_feature(env, ARM_FEATURE_THUMB2); - set_feature(env, ARM_FEATURE_MPIDR); - if (!arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V6K); - } else { - set_feature(env, ARM_FEATURE_V6); - } - - /* Always define VBAR for V7 CPUs even if it doesn't exist in - * non-EL3 configs. This is needed by some legacy boards. - */ - set_feature(env, ARM_FEATURE_VBAR); - } - if (arm_feature(env, ARM_FEATURE_V6K)) { - set_feature(env, ARM_FEATURE_V6); - set_feature(env, ARM_FEATURE_MVFR); - } - if (arm_feature(env, ARM_FEATURE_V6)) { - set_feature(env, ARM_FEATURE_V5); - if (!arm_feature(env, ARM_FEATURE_M)) { - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_jazelle, cpu)); - set_feature(env, ARM_FEATURE_AUXCR); - } - } - if (arm_feature(env, ARM_FEATURE_V5)) { - set_feature(env, ARM_FEATURE_V4T); - } - if (arm_feature(env, ARM_FEATURE_LPAE)) { - set_feature(env, ARM_FEATURE_V7MP); - } - if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { - set_feature(env, ARM_FEATURE_CBAR); - } - if (arm_feature(env, ARM_FEATURE_THUMB2) && - !arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_THUMB_DSP); - } /* * We rely on no XScale CPU having VFP so we can use the same bits in the -- 2.34.1 M-profile CPUs generally allow configuration of the number of MPU regions that they have. We don't currently model this, so our implementations of some of the board models provide CPUs with the wrong number of regions. RTOSes like Zephyr that hardcode the expected number of regions may therefore not run on the model if they are set up to run on real hardware. Add properties mpu-ns-regions and mpu-s-regions to the ARMV7M object, matching the ability of hardware to configure the number of Secure and NonSecure regions separately. Our actual CPU implementation doesn't currently support that, and it happens that none of the MPS boards we model set the number of regions differently for Secure vs NonSecure, so we provide an interface to the boards and SoCs that won't need to change if we ever do add that functionality in future, but make it an error to configure the two properties to different values. (The property name on the CPU is the somewhat misnamed-for-M-profile "pmsav7-dregion", so we don't follow that naming convention for the properties here. The TRM doesn't say what the CPU configuration variable names are, so we pick something, and follow the lowercase convention we already have for properties here.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-3-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 8 ++++++++ hw/arm/armv7m.c | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ARMv7MState, ARMV7M) * + Property "vfp": enable VFP (forwarded to CPU object) * + Property "dsp": enable DSP (forwarded to CPU object) * + Property "enable-bitband": expose bitbanded IO + * + Property "mpu-ns-regions": number of Non-Secure MPU regions (forwarded + * to CPU object pmsav7-dregion property; default is whatever the default + * for the CPU is) + * + Property "mpu-s-regions": number of Secure MPU regions (default is + * whatever the default for the CPU is; must currently be set to the same + * value as mpu-ns-regions if the CPU implements the Security Extension) * + Clock input "refclk" is the external reference clock for the systick timers * + Clock input "cpuclk" is the main CPU clock */ @@ -XXX,XX +XXX,XX @@ struct ARMv7MState { Object *idau; uint32_t init_svtor; uint32_t init_nsvtor; + uint32_t mpu_ns_regions; + uint32_t mpu_s_regions; bool enable_bitband; bool start_powered_off; bool vfp; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) } } + /* + * Real M-profile hardware can be configured with a different number of + * MPU regions for Secure vs NonSecure. QEMU's CPU implementation doesn't + * support that yet, so catch attempts to select that. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + s->mpu_ns_regions != s->mpu_s_regions) { + error_setg(errp, + "mpu-ns-regions and mpu-s-regions properties must have the same value"); + return; + } + if (s->mpu_ns_regions != UINT_MAX && + object_property_find(OBJECT(s->cpu), "pmsav7-dregion")) { + if (!object_property_set_uint(OBJECT(s->cpu), "pmsav7-dregion", + s->mpu_ns_regions, errp)) { + return; + } + } + /* * Tell the CPU where the NVIC is; it will fail realize if it doesn't * have one. Similarly, tell the NVIC where its CPU is. @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { false), DEFINE_PROP_BOOL("vfp", ARMv7MState, vfp, true), DEFINE_PROP_BOOL("dsp", ARMv7MState, dsp, true), + DEFINE_PROP_UINT32("mpu-ns-regions", ARMv7MState, mpu_ns_regions, UINT_MAX), + DEFINE_PROP_UINT32("mpu-s-regions", ARMv7MState, mpu_s_regions, UINT_MAX), DEFINE_PROP_END_OF_LIST(), }; -- 2.34.1 The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The MPS2/MPS3 FPGA images don't override these except in the case of AN547, which uses 16 MPU regions. Define properties on the ARMSSE object for the MPU regions (using the same names as the documented RTL configuration settings, and following the pattern we already have for this device of using all-caps names as the RTL does), and set them in the board code. We don't actually need to override the default except on AN547, but it's simpler code to have the board code set them always rather than tracking which board subtypes want to set them to a non-default value separately from what that value is. Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524 we now correctly use 8 MPU regions, while mps3-an547 stays at its current 16 regions. It's possible some guest code wrongly depended on the previous incorrectly modeled number of memory regions. (Such guest code should ideally check the number of regions via the MPU_TYPE register.) The old behaviour can be obtained with additional -global arguments to QEMU: For mps2-an521 and mps2-an524: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16 For mps2-an505: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 NB that the way the implementation allows this use of -global is slightly fragile: if the board code explicitly sets the properties on the sse-200 object, this overrides the -global command line option. So we rely on: - the boards that need fixing all happen to use the SSE defaults - we can write the board code to only set the property if it is different from the default, rather than having all boards explicitly set the property - the board that does need to use a non-default value happens to need to set it to the same value (16) we previously used This works, but there are some kinds of refactoring of the mps2-tz.c code that would break the support for -global here. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 5 +++++ hw/arm/armsse.c | 16 ++++++++++++++++ hw/arm/mps2-tz.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an * SSE-200 both are present; CPU0 in an SSE-200 has neither. * Since the IoTKit has only one CPU, it does not have the CPU1_* properties. + * + QOM properties "CPU0_MPU_NS", "CPU0_MPU_S", "CPU1_MPU_NS" and "CPU1_MPU_S" + * which set the number of MPU regions on the CPUs. If there is only one + * CPU the CPU1 properties are not present. * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, * which are wired to its NVIC lines 32 .. n+32 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t exp_numirq; uint32_t sram_addr_width; uint32_t init_svtor; + uint32_t cpu_mpu_ns[SSE_MAX_CPUS]; + uint32_t cpu_mpu_s[SSE_MAX_CPUS]; bool cpu_fpu[SSE_MAX_CPUS]; bool cpu_dsp[SSE_MAX_CPUS]; }; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse200_properties[] = { DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], false), DEFINE_PROP_BOOL("CPU1_FPU", ARMSSE, cpu_fpu[1], true), DEFINE_PROP_BOOL("CPU1_DSP", ARMSSE, cpu_dsp[1], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), + DEFINE_PROP_UINT32("CPU1_MPU_NS", ARMSSE, cpu_mpu_ns[1], 8), + DEFINE_PROP_UINT32("CPU1_MPU_S", ARMSSE, cpu_mpu_s[1], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse300_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } } + if (!object_property_set_uint(cpuobj, "mpu-ns-regions", + s->cpu_mpu_ns[i], errp)) { + return; + } + if (!object_property_set_uint(cpuobj, "mpu-s-regions", + s->cpu_mpu_s[i], errp)) { + return; + } if (i > 0) { memory_region_add_subregion_overlap(&s->cpu_container[i], 0, diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineClass { int uart_overflow_irq; /* number of the combined UART overflow IRQ */ uint32_t init_svtor; /* init-svtor setting for SSE */ uint32_t sram_addr_width; /* SRAM_ADDR_WIDTH setting for SSE */ + uint32_t cpu0_mpu_ns; /* CPU0_MPU_NS setting for SSE */ + uint32_t cpu0_mpu_s; /* CPU0_MPU_S setting for SSE */ + uint32_t cpu1_mpu_ns; /* CPU1_MPU_NS setting for SSE */ + uint32_t cpu1_mpu_s; /* CPU1_MPU_S setting for SSE */ const RAMInfo *raminfo; const char *armsse_type; uint32_t boot_ram_size; /* size of ram at address 0; 0 == find in raminfo */ @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) #define MPS3_DDR_SIZE (2 * GiB) #endif +/* For cpu{0,1}_mpu_{ns,s}, means "leave at SSE's default value" */ +#define MPU_REGION_DEFAULT UINT32_MAX + static const uint32_t an505_oscclk[] = { 40000000, 24580000, @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq); qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor); + if (mmc->cpu0_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_NS", mmc->cpu0_mpu_ns); + } + if (mmc->cpu0_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_S", mmc->cpu0_mpu_s); + } + if (object_property_find(OBJECT(iotkitdev), "CPU1_MPU_NS")) { + if (mmc->cpu1_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_NS", mmc->cpu1_mpu_ns); + } + if (mmc->cpu1_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_S", mmc->cpu1_mpu_s); + } + } qdev_prop_set_uint32(iotkitdev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); @@ -XXX,XX +XXX,XX @@ static void mps2tz_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); mc->init = mps2tz_common_init; mc->reset = mps2_machine_reset; iic->check = mps2_tz_idau_check; + + /* Most machines leave these at the SSE defaults */ + mmc->cpu0_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu0_mpu_s = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_s = MPU_REGION_DEFAULT; } static void mps2tz_set_default_ram_info(MPS2TZMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3tz_an547_class_init(ObjectClass *oc, void *data) mmc->numirq = 96; mmc->uart_overflow_irq = 48; mmc->init_svtor = 0x00000000; + mmc->cpu0_mpu_s = mmc->cpu0_mpu_ns = 16; mmc->sram_addr_width = 21; mmc->raminfo = an547_raminfo; mmc->armsse_type = TYPE_SSE300; -- 2.34.1 Hi; here's the first arm pullreq for 9.1. This includes the reset method function signature change, so it has some chance of compile failures due to merge conflicts if some other pullreq added a device reset method and that pullreq got applied before this one. If so, the changes needed to fix those up can be created by running the spatch rune described in the commit message of the "hw, target: Add ResetType argument to hold and exit phase methods" commit. thanks -- PMM The following changes since commit 5da72194df36535d773c8bdc951529ecd5e31707: Merge tag 'pull-tcg-20240424' of https://gitlab.com/rth7680/qemu into staging (2024-04-24 15:51:49 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20240425 for you to fetch changes up to 214652da123e3821657a64691ee556281e9f6238: tests/qtest: Add tests for the STM32L4x5 USART (2024-04-25 10:21:59 +0100) ---------------------------------------------------------------- target-arm queue: * Implement FEAT_NMI and NMI support in the GICv3 * hw/dma: avoid apparent overflow in soc_dma_set_request * linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code * Add ResetType argument to Resettable hold and exit phase methods * Add RESET_TYPE_SNAPSHOT_LOAD ResetType * Implement STM32L4x5 USART ---------------------------------------------------------------- Anastasia Belova (1): hw/dma: avoid apparent overflow in soc_dma_set_request Arnaud Minier (5): hw/char: Implement STM32L4x5 USART skeleton hw/char/stm32l4x5_usart: Enable serial read and write hw/char/stm32l4x5_usart: Add options for serial parameters setting hw/arm: Add the USART to the stm32l4x5 SoC tests/qtest: Add tests for the STM32L4x5 USART Jinjie Ruan (22): target/arm: Handle HCR_EL2 accesses for bits introduced with FEAT_NMI target/arm: Add PSTATE.ALLINT target/arm: Add support for FEAT_NMI, Non-maskable Interrupt target/arm: Implement ALLINT MSR (immediate) target/arm: Support MSR access to ALLINT target/arm: Add support for Non-maskable Interrupt target/arm: Add support for NMI in arm_phys_excp_target_el() target/arm: Handle IS/FS in ISR_EL1 for NMI, VINMI and VFNMI target/arm: Handle PSTATE.ALLINT on taking an exception hw/intc/arm_gicv3: Add external IRQ lines for NMI hw/arm/virt: Wire NMI and VINMI irq lines from GIC to CPU target/arm: Handle NMI in arm_cpu_do_interrupt_aarch64() hw/intc/arm_gicv3: Add has-nmi property to GICv3 device hw/intc/arm_gicv3_kvm: Not set has-nmi=true for the KVM GICv3 hw/intc/arm_gicv3: Add irq non-maskable property hw/intc/arm_gicv3_redist: Implement GICR_INMIR0 hw/intc/arm_gicv3: Implement GICD_INMIR hw/intc/arm_gicv3: Implement NMI interrupt priority hw/intc/arm_gicv3: Report the NMI interrupt in gicv3_cpuif_update() hw/intc/arm_gicv3: Report the VINMI interrupt target/arm: Add FEAT_NMI to max hw/arm/virt: Enable NMI support in the GIC if the CPU has FEAT_NMI Peter Maydell (9): hw/intc/arm_gicv3: Add NMI handling CPU interface registers hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read() linux-user/flatload.c: Remove unused bFLT shared-library and ZFLAT code hw/misc: Don't special case RESET_TYPE_COLD in npcm7xx_clk, gcr allwinner-i2c, adm1272: Use device_cold_reset() for software-triggered reset scripts/coccinelle: New script to add ResetType to hold and exit phases hw, target: Add ResetType argument to hold and exit phase methods docs/devel/reset: Update to new API for hold and exit phase methods reset: Add RESET_TYPE_SNAPSHOT_LOAD MAINTAINERS | 1 + docs/devel/reset.rst | 25 +- docs/system/arm/b-l475e-iot01a.rst | 2 +- docs/system/arm/emulation.rst | 1 + scripts/coccinelle/reset-type.cocci | 133 ++++++++ hw/intc/gicv3_internal.h | 13 + include/hw/arm/stm32l4x5_soc.h | 7 + include/hw/char/stm32l4x5_usart.h | 67 ++++ include/hw/intc/arm_gic_common.h | 2 + include/hw/intc/arm_gicv3_common.h | 14 + include/hw/resettable.h | 5 +- linux-user/flat.h | 5 +- target/arm/cpu-features.h | 5 + target/arm/cpu-qom.h | 5 +- target/arm/cpu.h | 9 + target/arm/internals.h | 21 ++ target/arm/tcg/helper-a64.h | 1 + target/arm/tcg/a64.decode | 1 + hw/adc/npcm7xx_adc.c | 2 +- hw/arm/pxa2xx_pic.c | 2 +- hw/arm/smmu-common.c | 2 +- hw/arm/smmuv3.c | 4 +- hw/arm/stellaris.c | 10 +- hw/arm/stm32l4x5_soc.c | 83 ++++- hw/arm/virt.c | 29 +- hw/audio/asc.c | 2 +- hw/char/cadence_uart.c | 2 +- hw/char/sifive_uart.c | 2 +- hw/char/stm32l4x5_usart.c | 637 ++++++++++++++++++++++++++++++++++++ hw/core/cpu-common.c | 2 +- hw/core/qdev.c | 4 +- hw/core/reset.c | 17 +- hw/core/resettable.c | 8 +- hw/display/virtio-vga.c | 4 +- hw/dma/soc_dma.c | 4 +- hw/gpio/npcm7xx_gpio.c | 2 +- hw/gpio/pl061.c | 2 +- hw/gpio/stm32l4x5_gpio.c | 2 +- hw/hyperv/vmbus.c | 2 +- hw/i2c/allwinner-i2c.c | 5 +- hw/i2c/npcm7xx_smbus.c | 2 +- hw/input/adb.c | 2 +- hw/input/ps2.c | 12 +- hw/intc/arm_gic_common.c | 2 +- hw/intc/arm_gic_kvm.c | 4 +- hw/intc/arm_gicv3.c | 67 +++- hw/intc/arm_gicv3_common.c | 50 ++- hw/intc/arm_gicv3_cpuif.c | 268 ++++++++++++++- hw/intc/arm_gicv3_dist.c | 36 ++ hw/intc/arm_gicv3_its.c | 4 +- hw/intc/arm_gicv3_its_common.c | 2 +- hw/intc/arm_gicv3_its_kvm.c | 4 +- hw/intc/arm_gicv3_kvm.c | 9 +- hw/intc/arm_gicv3_redist.c | 22 ++ hw/intc/xics.c | 2 +- hw/m68k/q800-glue.c | 2 +- hw/misc/djmemc.c | 2 +- hw/misc/iosb.c | 2 +- hw/misc/mac_via.c | 8 +- hw/misc/macio/cuda.c | 4 +- hw/misc/macio/pmu.c | 4 +- hw/misc/mos6522.c | 2 +- hw/misc/npcm7xx_clk.c | 13 +- hw/misc/npcm7xx_gcr.c | 12 +- hw/misc/npcm7xx_mft.c | 2 +- hw/misc/npcm7xx_pwm.c | 2 +- hw/misc/stm32l4x5_exti.c | 2 +- hw/misc/stm32l4x5_rcc.c | 10 +- hw/misc/stm32l4x5_syscfg.c | 2 +- hw/misc/xlnx-versal-cframe-reg.c | 2 +- hw/misc/xlnx-versal-crl.c | 2 +- hw/misc/xlnx-versal-pmc-iou-slcr.c | 2 +- hw/misc/xlnx-versal-trng.c | 2 +- hw/misc/xlnx-versal-xramc.c | 2 +- hw/misc/xlnx-zynqmp-apu-ctrl.c | 2 +- hw/misc/xlnx-zynqmp-crf.c | 2 +- hw/misc/zynq_slcr.c | 4 +- hw/net/can/xlnx-zynqmp-can.c | 2 +- hw/net/e1000.c | 2 +- hw/net/e1000e.c | 2 +- hw/net/igb.c | 2 +- hw/net/igbvf.c | 2 +- hw/nvram/xlnx-bbram.c | 2 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 2 +- hw/nvram/xlnx-zynqmp-efuse.c | 2 +- hw/pci-bridge/cxl_root_port.c | 4 +- hw/pci-bridge/pcie_root_port.c | 2 +- hw/pci-host/bonito.c | 2 +- hw/pci-host/pnv_phb.c | 4 +- hw/pci-host/pnv_phb3_msi.c | 4 +- hw/pci/pci.c | 4 +- hw/rtc/mc146818rtc.c | 2 +- hw/s390x/css-bridge.c | 2 +- hw/sensor/adm1266.c | 2 +- hw/sensor/adm1272.c | 4 +- hw/sensor/isl_pmbus_vr.c | 10 +- hw/sensor/max31785.c | 2 +- hw/sensor/max34451.c | 2 +- hw/ssi/npcm7xx_fiu.c | 2 +- hw/timer/etraxfs_timer.c | 2 +- hw/timer/npcm7xx_timer.c | 2 +- hw/usb/hcd-dwc2.c | 8 +- hw/usb/xlnx-versal-usb2-ctrl-regs.c | 2 +- hw/virtio/virtio-pci.c | 2 +- linux-user/flatload.c | 293 +---------------- target/arm/cpu.c | 151 ++++++++- target/arm/helper.c | 101 +++++- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/helper-a64.c | 16 +- target/arm/tcg/translate-a64.c | 19 ++ target/avr/cpu.c | 4 +- target/cris/cpu.c | 4 +- target/hexagon/cpu.c | 4 +- target/i386/cpu.c | 4 +- target/loongarch/cpu.c | 4 +- target/m68k/cpu.c | 4 +- target/microblaze/cpu.c | 4 +- target/mips/cpu.c | 4 +- target/openrisc/cpu.c | 4 +- target/ppc/cpu_init.c | 4 +- target/riscv/cpu.c | 4 +- target/rx/cpu.c | 4 +- target/sh4/cpu.c | 4 +- target/sparc/cpu.c | 4 +- target/tricore/cpu.c | 4 +- target/xtensa/cpu.c | 4 +- tests/qtest/stm32l4x5_usart-test.c | 315 ++++++++++++++++++ hw/arm/Kconfig | 1 + hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 12 + hw/intc/trace-events | 2 + tests/qtest/meson.build | 4 +- 133 files changed, 2239 insertions(+), 537 deletions(-) create mode 100644 scripts/coccinelle/reset-type.cocci create mode 100644 include/hw/char/stm32l4x5_usart.h create mode 100644 hw/char/stm32l4x5_usart.c create mode 100644 tests/qtest/stm32l4x5_usart-test.c From: Jinjie Ruan <ruanjinjie@huawei.com> FEAT_NMI defines another three new bits in HCRX_EL2: TALLINT, HCRX_VINMI and HCRX_VFNMI. When the feature is enabled, allow these bits to be written in HCRX_EL2. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-2-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu-features.h | 5 +++++ target/arm/helper.c | 8 +++++++- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu-features.h b/target/arm/cpu-features.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-features.h +++ b/target/arm/cpu-features.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_sme(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, SME) != 0; } +static inline bool isar_feature_aa64_nmi(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64pfr1, ID_AA64PFR1, NMI) != 0; +} + static inline bool isar_feature_aa64_tgran4_lpa2(const ARMISARegisters *id) { return FIELD_SEX64(id->id_aa64mmfr0, ID_AA64MMFR0, TGRAN4) >= 1; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool el_is_in_host(CPUARMState *env, int el) static void hcrx_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { + ARMCPU *cpu = env_archcpu(env); uint64_t valid_mask = 0; /* FEAT_MOPS adds MSCEn and MCE2 */ - if (cpu_isar_feature(aa64_mops, env_archcpu(env))) { + if (cpu_isar_feature(aa64_mops, cpu)) { valid_mask |= HCRX_MSCEN | HCRX_MCE2; } + /* FEAT_NMI adds TALLINT, VINMI and VFNMI */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + valid_mask |= HCRX_TALLINT | HCRX_VINMI | HCRX_VFNMI; + } + /* Clear RES0 bits. */ env->cp15.hcrx_el2 = value & valid_mask; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> When PSTATE.ALLINT is set, an IRQ or FIQ interrupt that is targeted to ELx, with or without superpriority is masked. As Richard suggested, place ALLINT bit in PSTATE in env->pstate. In the pseudocode, AArch64.ExceptionReturn() calls SetPSTATEFromPSR(), which treats PSTATE.ALLINT as one of the bits which are reinstated from SPSR to PSTATE regardless of whether this is an illegal exception return or not. So handle PSTATE.ALLINT the same way as PSTATE.DAIF in the illegal_return exit path of the exception_return helper. With the change, exception entry and return are automatically handled. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-3-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/tcg/helper-a64.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define PSTATE_D (1U << 9) #define PSTATE_BTYPE (3U << 10) #define PSTATE_SSBS (1U << 12) +#define PSTATE_ALLINT (1U << 13) #define PSTATE_IL (1U << 20) #define PSTATE_SS (1U << 21) #define PSTATE_PAN (1U << 22) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ illegal_return: */ env->pstate |= PSTATE_IL; env->pc = new_pc; - spsr &= PSTATE_NZCV | PSTATE_DAIF; - spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF); + spsr &= PSTATE_NZCV | PSTATE_DAIF | PSTATE_ALLINT; + spsr |= pstate_read(env) & ~(PSTATE_NZCV | PSTATE_DAIF | PSTATE_ALLINT); pstate_write(env, spsr); if (!arm_singlestep_active(env)) { env->pstate &= ~PSTATE_SS; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add support for FEAT_NMI. NMI (FEAT_NMI) is an mandatory feature in ARMv8.8-A and ARM v9.3-A. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-4-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t aarch64_pstate_valid_mask(const ARMISARegisters *id) if (isar_feature_aa64_mte(id)) { valid |= PSTATE_TCO; } + if (isar_feature_aa64_nmi(id)) { + valid |= PSTATE_ALLINT; + } return valid; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add ALLINT MSR (immediate) to decodetree, in which the CRm is 0b000x. The EL0 check is necessary to ALLINT, and the EL1 check is necessary when imm == 1. So implement it inline for EL2/3, or EL1 with imm==0. Avoid the unconditional write to pc and use raise_exception_ra to unwind. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-5-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/helper-a64.h | 1 + target/arm/tcg/a64.decode | 1 + target/arm/tcg/helper-a64.c | 12 ++++++++++++ target/arm/tcg/translate-a64.c | 19 +++++++++++++++++++ 4 files changed, 33 insertions(+) diff --git a/target/arm/tcg/helper-a64.h b/target/arm/tcg/helper-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.h +++ b/target/arm/tcg/helper-a64.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_1(rbit64, TCG_CALL_NO_RWG_SE, i64, i64) DEF_HELPER_2(msr_i_spsel, void, env, i32) DEF_HELPER_2(msr_i_daifset, void, env, i32) DEF_HELPER_2(msr_i_daifclear, void, env, i32) +DEF_HELPER_1(msr_set_allint_el1, void, env) DEF_HELPER_3(vfp_cmph_a64, i64, f16, f16, ptr) DEF_HELPER_3(vfp_cmpeh_a64, i64, f16, f16, ptr) DEF_HELPER_3(vfp_cmps_a64, i64, f32, f32, ptr) diff --git a/target/arm/tcg/a64.decode b/target/arm/tcg/a64.decode index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/a64.decode +++ b/target/arm/tcg/a64.decode @@ -XXX,XX +XXX,XX @@ MSR_i_DIT 1101 0101 0000 0 011 0100 .... 010 11111 @msr_i MSR_i_TCO 1101 0101 0000 0 011 0100 .... 100 11111 @msr_i MSR_i_DAIFSET 1101 0101 0000 0 011 0100 .... 110 11111 @msr_i MSR_i_DAIFCLEAR 1101 0101 0000 0 011 0100 .... 111 11111 @msr_i +MSR_i_ALLINT 1101 0101 0000 0 001 0100 000 imm:1 000 11111 MSR_i_SVCR 1101 0101 0000 0 011 0100 0 mask:2 imm:1 011 11111 # MRS, MSR (register), SYS, SYSL. These are all essentially the diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(msr_i_spsel)(CPUARMState *env, uint32_t imm) update_spsel(env, imm); } +void HELPER(msr_set_allint_el1)(CPUARMState *env) +{ + /* ALLINT update to PSTATE. */ + if (arm_hcrx_el2_eff(env) & HCRX_TALLINT) { + raise_exception_ra(env, EXCP_UDEF, + syn_aa64_sysregtrap(0, 1, 0, 4, 1, 0x1f, 0), 2, + GETPC()); + } + + env->pstate |= PSTATE_ALLINT; +} + static void daif_check(CPUARMState *env, uint32_t op, uint32_t imm, uintptr_t ra) { diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_MSR_i_DAIFCLEAR(DisasContext *s, arg_i *a) return true; } +static bool trans_MSR_i_ALLINT(DisasContext *s, arg_i *a) +{ + if (!dc_isar_feature(aa64_nmi, s) || s->current_el == 0) { + return false; + } + + if (a->imm == 0) { + clear_pstate_bits(PSTATE_ALLINT); + } else if (s->current_el > 1) { + set_pstate_bits(PSTATE_ALLINT); + } else { + gen_helper_msr_set_allint_el1(tcg_env); + } + + /* Exit the cpu loop to re-evaluate pending IRQs. */ + s->base.is_jmp = DISAS_UPDATE_EXIT; + return true; +} + static bool trans_MSR_i_SVCR(DisasContext *s, arg_MSR_i_SVCR *a) { if (!dc_isar_feature(aa64_sme, s) || a->mask == 0) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Support ALLINT msr access as follow: mrs <xt>, ALLINT // read allint msr ALLINT, <xt> // write allint with imm Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-6-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo rme_mte_reginfo[] = { .opc0 = 1, .opc1 = 6, .crn = 7, .crm = 14, .opc2 = 5, .access = PL3_W, .type = ARM_CP_NOP }, }; + +static void aa64_allint_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + env->pstate = (env->pstate & ~PSTATE_ALLINT) | (value & PSTATE_ALLINT); +} + +static uint64_t aa64_allint_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + return env->pstate & PSTATE_ALLINT; +} + +static CPAccessResult aa64_allint_access(CPUARMState *env, + const ARMCPRegInfo *ri, bool isread) +{ + if (!isread && arm_current_el(env) == 1 && + (arm_hcrx_el2_eff(env) & HCRX_TALLINT)) { + return CP_ACCESS_TRAP_EL2; + } + return CP_ACCESS_OK; +} + +static const ARMCPRegInfo nmi_reginfo[] = { + { .name = "ALLINT", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 0, .opc2 = 0, .crn = 4, .crm = 3, + .type = ARM_CP_NO_RAW, + .access = PL1_RW, .accessfn = aa64_allint_access, + .fieldoffset = offsetof(CPUARMState, pstate), + .writefn = aa64_allint_write, .readfn = aa64_allint_read, + .resetfn = arm_cp_reset_ignore }, +}; #endif /* TARGET_AARCH64 */ static void define_pmu_regs(ARMCPU *cpu) @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) if (cpu_isar_feature(aa64_nv2, cpu)) { define_arm_cp_regs(cpu, nv2_reginfo); } + + if (cpu_isar_feature(aa64_nmi, cpu)) { + define_arm_cp_regs(cpu, nmi_reginfo); + } #endif if (cpu_isar_feature(any_predinv, cpu)) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> This only implements the external delivery method via the GICv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-7-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu-qom.h | 5 +- target/arm/cpu.h | 6 ++ target/arm/internals.h | 18 +++++ target/arm/cpu.c | 147 ++++++++++++++++++++++++++++++++++++++--- target/arm/helper.c | 33 +++++++-- 5 files changed, 193 insertions(+), 16 deletions(-) diff --git a/target/arm/cpu-qom.h b/target/arm/cpu-qom.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu-qom.h +++ b/target/arm/cpu-qom.h @@ -XXX,XX +XXX,XX @@ DECLARE_CLASS_CHECKERS(AArch64CPUClass, AARCH64_CPU, #define ARM_CPU_TYPE_SUFFIX "-" TYPE_ARM_CPU #define ARM_CPU_TYPE_NAME(name) (name ARM_CPU_TYPE_SUFFIX) -/* Meanings of the ARMCPU object's four inbound GPIO lines */ +/* Meanings of the ARMCPU object's seven inbound GPIO lines */ #define ARM_CPU_IRQ 0 #define ARM_CPU_FIQ 1 #define ARM_CPU_VIRQ 2 #define ARM_CPU_VFIQ 3 +#define ARM_CPU_NMI 4 +#define ARM_CPU_VINMI 5 +#define ARM_CPU_VFNMI 6 /* For M profile, some registers are banked secure vs non-secure; * these are represented as a 2-element array where the first element diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ #define EXCP_DIVBYZERO 23 /* v7M DIVBYZERO UsageFault */ #define EXCP_VSERR 24 #define EXCP_GPC 25 /* v9 Granule Protection Check Fault */ +#define EXCP_NMI 26 +#define EXCP_VINMI 27 +#define EXCP_VFNMI 28 /* NB: add new EXCP_ defines to the array in arm_log_exception() too */ #define ARMV7M_EXCP_RESET 1 @@ -XXX,XX +XXX,XX @@ #define CPU_INTERRUPT_VIRQ CPU_INTERRUPT_TGT_EXT_2 #define CPU_INTERRUPT_VFIQ CPU_INTERRUPT_TGT_EXT_3 #define CPU_INTERRUPT_VSERR CPU_INTERRUPT_TGT_INT_0 +#define CPU_INTERRUPT_NMI CPU_INTERRUPT_TGT_EXT_4 +#define CPU_INTERRUPT_VINMI CPU_INTERRUPT_TGT_EXT_0 +#define CPU_INTERRUPT_VFNMI CPU_INTERRUPT_TGT_INT_1 /* The usual mapping for an AArch64 system register to its AArch32 * counterpart is for the 32 bit world to have access to the lower diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu); */ void arm_cpu_update_vfiq(ARMCPU *cpu); +/** + * arm_cpu_update_vinmi: Update CPU_INTERRUPT_VINMI bit in cs->interrupt_request + * + * Update the CPU_INTERRUPT_VINMI bit in cs->interrupt_request, following + * a change to either the input VNMI line from the GIC or the HCRX_EL2.VINMI. + * Must be called with the BQL held. + */ +void arm_cpu_update_vinmi(ARMCPU *cpu); + +/** + * arm_cpu_update_vfnmi: Update CPU_INTERRUPT_VFNMI bit in cs->interrupt_request + * + * Update the CPU_INTERRUPT_VFNMI bit in cs->interrupt_request, following + * a change to the HCRX_EL2.VFNMI. + * Must be called with the BQL held. + */ +void arm_cpu_update_vfnmi(ARMCPU *cpu); + /** * arm_cpu_update_vserr: Update CPU_INTERRUPT_VSERR bit * diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ void arm_restore_state_to_opc(CPUState *cs, } #endif /* CONFIG_TCG */ +/* + * With SCTLR_ELx.NMI == 0, IRQ with Superpriority is masked identically with + * IRQ without Superpriority. Moreover, if the GIC is configured so that + * FEAT_GICv3_NMI is only set if FEAT_NMI is set, then we won't ever see + * CPU_INTERRUPT_*NMI anyway. So we might as well accept NMI here + * unconditionally. + */ static bool arm_cpu_has_work(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_has_work(CPUState *cs) return (cpu->power_state != PSCI_OFF) && cs->interrupt_request & (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD + | CPU_INTERRUPT_NMI | CPU_INTERRUPT_VINMI | CPU_INTERRUPT_VFNMI | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ | CPU_INTERRUPT_VSERR | CPU_INTERRUPT_EXITTB); } @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, CPUARMState *env = cpu_env(cs); bool pstate_unmasked; bool unmasked = false; + bool allIntMask = false; /* * Don't take exceptions if they target a lower EL. @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, return false; } + if (cpu_isar_feature(aa64_nmi, env_archcpu(env)) && + env->cp15.sctlr_el[target_el] & SCTLR_NMI && cur_el == target_el) { + allIntMask = env->pstate & PSTATE_ALLINT || + ((env->cp15.sctlr_el[target_el] & SCTLR_SPINTMASK) && + (env->pstate & PSTATE_SP)); + } + switch (excp_idx) { + case EXCP_NMI: + pstate_unmasked = !allIntMask; + break; + + case EXCP_VINMI: + if (!(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) { + /* VINMIs are only taken when hypervized. */ + return false; + } + return !allIntMask; + case EXCP_VFNMI: + if (!(hcr_el2 & HCR_FMO) || (hcr_el2 & HCR_TGE)) { + /* VFNMIs are only taken when hypervized. */ + return false; + } + return !allIntMask; case EXCP_FIQ: - pstate_unmasked = !(env->daif & PSTATE_F); + pstate_unmasked = (!(env->daif & PSTATE_F)) && (!allIntMask); break; case EXCP_IRQ: - pstate_unmasked = !(env->daif & PSTATE_I); + pstate_unmasked = (!(env->daif & PSTATE_I)) && (!allIntMask); break; case EXCP_VFIQ: @@ -XXX,XX +XXX,XX @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx, /* VFIQs are only taken when hypervized. */ return false; } - return !(env->daif & PSTATE_F); + return !(env->daif & PSTATE_F) && (!allIntMask); case EXCP_VIRQ: if (!(hcr_el2 & HCR_IMO) || (hcr_el2 & HCR_TGE)) { /* VIRQs are only taken when hypervized. */ return false; } - return !(env->daif & PSTATE_I); + return !(env->daif & PSTATE_I) && (!allIntMask); case EXCP_VSERR: if (!(hcr_el2 & HCR_AMO) || (hcr_el2 & HCR_TGE)) { /* VIRQs are only taken when hypervized. */ @@ -XXX,XX +XXX,XX @@ static bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) /* The prioritization of interrupts is IMPLEMENTATION DEFINED. */ + if (cpu_isar_feature(aa64_nmi, env_archcpu(env)) && + (arm_sctlr(env, cur_el) & SCTLR_NMI)) { + if (interrupt_request & CPU_INTERRUPT_NMI) { + excp_idx = EXCP_NMI; + target_el = arm_phys_excp_target_el(cs, excp_idx, cur_el, secure); + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + if (interrupt_request & CPU_INTERRUPT_VINMI) { + excp_idx = EXCP_VINMI; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + if (interrupt_request & CPU_INTERRUPT_VFNMI) { + excp_idx = EXCP_VFNMI; + target_el = 1; + if (arm_excp_unmasked(cs, excp_idx, target_el, + cur_el, secure, hcr_el2)) { + goto found; + } + } + } else { + /* + * NMI disabled: interrupts with superpriority are handled + * as if they didn't have it + */ + if (interrupt_request & CPU_INTERRUPT_NMI) { + interrupt_request |= CPU_INTERRUPT_HARD; + } + if (interrupt_request & CPU_INTERRUPT_VINMI) { + interrupt_request |= CPU_INTERRUPT_VIRQ; + } + if (interrupt_request & CPU_INTERRUPT_VFNMI) { + interrupt_request |= CPU_INTERRUPT_VFIQ; + } + } + if (interrupt_request & CPU_INTERRUPT_FIQ) { excp_idx = EXCP_FIQ; target_el = arm_phys_excp_target_el(cs, excp_idx, cur_el, secure); @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_virq(ARMCPU *cpu) CPUARMState *env = &cpu->env; CPUState *cs = CPU(cpu); - bool new_state = (env->cp15.hcr_el2 & HCR_VI) || + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VI) && + !(arm_hcrx_el2_eff(env) & HCRX_VINMI)) || (env->irq_line_state & CPU_INTERRUPT_VIRQ); if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VIRQ) != 0)) { @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) CPUARMState *env = &cpu->env; CPUState *cs = CPU(cpu); - bool new_state = (env->cp15.hcr_el2 & HCR_VF) || + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VF) && + !(arm_hcrx_el2_eff(env) & HCRX_VFNMI)) || (env->irq_line_state & CPU_INTERRUPT_VFIQ); if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VFIQ) != 0)) { @@ -XXX,XX +XXX,XX @@ void arm_cpu_update_vfiq(ARMCPU *cpu) } } +void arm_cpu_update_vinmi(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VINMI, which is the logical OR of + * the HCRX_EL2.VINMI bit and the input line level from the GIC. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = ((arm_hcr_el2_eff(env) & HCR_VI) && + (arm_hcrx_el2_eff(env) & HCRX_VINMI)) || + (env->irq_line_state & CPU_INTERRUPT_VINMI); + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VINMI) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VINMI); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VINMI); + } + } +} + +void arm_cpu_update_vfnmi(ARMCPU *cpu) +{ + /* + * Update the interrupt level for VFNMI, which is the HCRX_EL2.VFNMI bit. + */ + CPUARMState *env = &cpu->env; + CPUState *cs = CPU(cpu); + + bool new_state = (arm_hcr_el2_eff(env) & HCR_VF) && + (arm_hcrx_el2_eff(env) & HCRX_VFNMI); + + if (new_state != ((cs->interrupt_request & CPU_INTERRUPT_VFNMI) != 0)) { + if (new_state) { + cpu_interrupt(cs, CPU_INTERRUPT_VFNMI); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_VFNMI); + } + } +} + void arm_cpu_update_vserr(ARMCPU *cpu) { /* @@ -XXX,XX +XXX,XX @@ static void arm_cpu_set_irq(void *opaque, int irq, int level) [ARM_CPU_IRQ] = CPU_INTERRUPT_HARD, [ARM_CPU_FIQ] = CPU_INTERRUPT_FIQ, [ARM_CPU_VIRQ] = CPU_INTERRUPT_VIRQ, - [ARM_CPU_VFIQ] = CPU_INTERRUPT_VFIQ + [ARM_CPU_VFIQ] = CPU_INTERRUPT_VFIQ, + [ARM_CPU_NMI] = CPU_INTERRUPT_NMI, + [ARM_CPU_VINMI] = CPU_INTERRUPT_VINMI, }; if (!arm_feature(env, ARM_FEATURE_EL2) && @@ -XXX,XX +XXX,XX @@ static void arm_cpu_set_irq(void *opaque, int irq, int level) case ARM_CPU_VFIQ: arm_cpu_update_vfiq(cpu); break; + case ARM_CPU_VINMI: + arm_cpu_update_vinmi(cpu); + break; case ARM_CPU_IRQ: case ARM_CPU_FIQ: + case ARM_CPU_NMI: if (level) { cpu_interrupt(cs, mask[irq]); } else { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_initfn(Object *obj) #else /* Our inbound IRQ and FIQ lines */ if (kvm_enabled()) { - /* VIRQ and VFIQ are unused with KVM but we add them to maintain - * the same interface as non-KVM CPUs. + /* + * VIRQ, VFIQ, NMI, VINMI are unused with KVM but we add + * them to maintain the same interface as non-KVM CPUs. */ - qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 4); + qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 6); } else { - qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 4); + qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 6); } qdev_init_gpio_out(DEVICE(cpu), cpu->gt_timer_outputs, diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) * and the state of the input lines from the GIC. (This requires * that we have the BQL, which is done by marking the * reginfo structs as ARM_CP_IO.) - * Note that if a write to HCR pends a VIRQ or VFIQ it is never - * possible for it to be taken immediately, because VIRQ and - * VFIQ are masked unless running at EL0 or EL1, and HCR - * can only be written at EL2. + * Note that if a write to HCR pends a VIRQ or VFIQ or VINMI or + * VFNMI, it is never possible for it to be taken immediately + * because VIRQ, VFIQ, VINMI and VFNMI are masked unless running + * at EL0 or EL1, and HCR can only be written at EL2. */ g_assert(bql_locked()); arm_cpu_update_virq(cpu); arm_cpu_update_vfiq(cpu); arm_cpu_update_vserr(cpu); + if (cpu_isar_feature(aa64_nmi, cpu)) { + arm_cpu_update_vinmi(cpu); + arm_cpu_update_vfnmi(cpu); + } } static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) @@ -XXX,XX +XXX,XX @@ static void hcrx_write(CPUARMState *env, const ARMCPRegInfo *ri, /* Clear RES0 bits. */ env->cp15.hcrx_el2 = value & valid_mask; + + /* + * Updates to VINMI and VFNMI require us to update the status of + * virtual NMI, which are the logical OR of these bits + * and the state of the input lines from the GIC. (This requires + * that we have the BQL, which is done by marking the + * reginfo structs as ARM_CP_IO.) + * Note that if a write to HCRX pends a VINMI or VFNMI it is never + * possible for it to be taken immediately, because VINMI and + * VFNMI are masked unless running at EL0 or EL1, and HCRX + * can only be written at EL2. + */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + g_assert(bql_locked()); + arm_cpu_update_vinmi(cpu); + arm_cpu_update_vfnmi(cpu); + } } static CPAccessResult access_hxen(CPUARMState *env, const ARMCPRegInfo *ri, @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_hxen(CPUARMState *env, const ARMCPRegInfo *ri, static const ARMCPRegInfo hcrx_el2_reginfo = { .name = "HCRX_EL2", .state = ARM_CP_STATE_AA64, + .type = ARM_CP_IO, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 2, .access = PL2_RW, .writefn = hcrx_write, .accessfn = access_hxen, .nv2_redirect_offset = 0xa0, @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs) [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", [EXCP_VSERR] = "Virtual SERR", [EXCP_GPC] = "Granule Protection Check", + [EXCP_NMI] = "NMI", + [EXCP_VINMI] = "Virtual IRQ NMI", + [EXCP_VFNMI] = "Virtual FIQ NMI", }; if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt with superpriority is always IRQ, never FIQ, so handle NMI same as IRQ in arm_phys_excp_target_el(). Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-8-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, hcr_el2 = arm_hcr_el2_eff(env); switch (excp_idx) { case EXCP_IRQ: + case EXCP_NMI: scr = ((env->cp15.scr_el3 & SCR_IRQ) == SCR_IRQ); hcr = hcr_el2 & HCR_IMO; break; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add IS and FS bit in ISR_EL1 and handle the read. With CPU_INTERRUPT_NMI or CPU_INTERRUPT_VINMI, both CPSR_I and ISR_IS must be set. With CPU_INTERRUPT_VFNMI, both CPSR_F and ISR_FS must be set. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-9-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/helper.c | 13 +++++++++++++ 2 files changed, 15 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void pmu_init(ARMCPU *cpu); #define CPSR_N (1U << 31) #define CPSR_NZCV (CPSR_N | CPSR_Z | CPSR_C | CPSR_V) #define CPSR_AIF (CPSR_A | CPSR_I | CPSR_F) +#define ISR_FS (1U << 9) +#define ISR_IS (1U << 10) #define CPSR_IT (CPSR_IT_0_1 | CPSR_IT_2_7) #define CACHED_CPSR_BITS (CPSR_T | CPSR_AIF | CPSR_GE | CPSR_IT | CPSR_Q \ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) { ret |= CPSR_I; } + if (cs->interrupt_request & CPU_INTERRUPT_VINMI) { + ret |= ISR_IS; + ret |= CPSR_I; + } } else { if (cs->interrupt_request & CPU_INTERRUPT_HARD) { ret |= CPSR_I; } + + if (cs->interrupt_request & CPU_INTERRUPT_NMI) { + ret |= ISR_IS; + ret |= CPSR_I; + } } if (hcr_el2 & HCR_FMO) { if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) { ret |= CPSR_F; } + if (cs->interrupt_request & CPU_INTERRUPT_VFNMI) { + ret |= ISR_FS; + ret |= CPSR_F; + } } else { if (cs->interrupt_request & CPU_INTERRUPT_FIQ) { ret |= CPSR_F; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Set or clear PSTATE.ALLINT on taking an exception to ELx according to the SCTLR_ELx.SPINTMASK bit. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-10-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) } } + if (cpu_isar_feature(aa64_nmi, cpu)) { + if (!(env->cp15.sctlr_el[new_el] & SCTLR_SPINTMASK)) { + new_mode |= PSTATE_ALLINT; + } else { + new_mode &= ~PSTATE_ALLINT; + } + } + pstate_write(env, PSTATE_DAIF | new_mode); env->aarch64 = true; aarch64_restore_sp(env, new_el); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Augment the GICv3's QOM device interface by adding one new set of sysbus IRQ line, to signal NMI to each CPU. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-11-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gic_common.h | 2 ++ include/hw/intc/arm_gicv3_common.h | 2 ++ hw/intc/arm_gicv3_common.c | 6 ++++++ 3 files changed, 10 insertions(+) diff --git a/include/hw/intc/arm_gic_common.h b/include/hw/intc/arm_gic_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gic_common.h +++ b/include/hw/intc/arm_gic_common.h @@ -XXX,XX +XXX,XX @@ struct GICState { qemu_irq parent_fiq[GIC_NCPU]; qemu_irq parent_virq[GIC_NCPU]; qemu_irq parent_vfiq[GIC_NCPU]; + qemu_irq parent_nmi[GIC_NCPU]; + qemu_irq parent_vnmi[GIC_NCPU]; qemu_irq maintenance_irq[GIC_NCPU]; /* GICD_CTLR; for a GIC with the security extensions the NS banked version diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { qemu_irq parent_fiq; qemu_irq parent_virq; qemu_irq parent_vfiq; + qemu_irq parent_nmi; + qemu_irq parent_vnmi; /* Redistributor */ uint32_t level; /* Current IRQ level */ diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler, for (i = 0; i < s->num_cpu; i++) { sysbus_init_irq(sbd, &s->cpu[i].parent_vfiq); } + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->cpu[i].parent_nmi); + } + for (i = 0; i < s->num_cpu; i++) { + sysbus_init_irq(sbd, &s->cpu[i].parent_vnmi); + } memory_region_init_io(&s->iomem_dist, OBJECT(s), ops, s, "gicv3_dist", 0x10000); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Wire the new NMI and VINMI interrupt line from the GIC to each CPU if it is not GICv2. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240407081733.3231820-12-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) /* Wire the outputs from each CPU's generic timer and the GICv3 * maintenance interrupt signal to the appropriate GIC PPI inputs, - * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + * and the GIC's IRQ/FIQ/VIRQ/VFIQ/NMI/VINMI interrupt outputs to the + * CPU's inputs. */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus, qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + + if (vms->gic_version != VIRT_GIC_VERSION_2) { + sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_NMI)); + sysbus_connect_irq(gicbusdev, i + 5 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VINMI)); + } } fdt_add_gic_node(vms); -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> According to Arm GIC section 4.6.3 Interrupt superpriority, the interrupt with superpriority is always IRQ, never FIQ, so the NMI exception trap entry behave like IRQ. And VINMI(vIRQ with Superpriority) can be raised from the GIC or come from the hcrx_el2.HCRX_VINMI bit, VFNMI(vFIQ with Superpriority) come from the hcrx_el2.HCRX_VFNMI bit. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-13-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_do_interrupt_aarch64(CPUState *cs) break; case EXCP_IRQ: case EXCP_VIRQ: + case EXCP_NMI: + case EXCP_VINMI: addr += 0x80; break; case EXCP_FIQ: case EXCP_VFIQ: + case EXCP_VFNMI: addr += 0x100; break; case EXCP_VSERR: -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add a property has-nmi to the GICv3 device, and use this to set the NMI bit in the GICD_TYPER register. This isn't visible to guests yet because the property defaults to false and we won't set it in the board code until we've landed all of the changes needed to implement FEAT_GICV3_NMI. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-14-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 1 + hw/intc/arm_gicv3_dist.c | 2 ++ 4 files changed, 5 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICD_CTLR_E1NWF (1U << 7) #define GICD_CTLR_RWP (1U << 31) +#define GICD_TYPER_NMI_SHIFT 9 #define GICD_TYPER_LPIS_SHIFT 17 /* 16 bits EventId */ diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3State { uint32_t num_irq; uint32_t revision; bool lpi_enable; + bool nmi_support; bool security_extn; bool force_8bit_prio; bool irq_reset_nonsecure; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static Property arm_gicv3_common_properties[] = { DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32), DEFINE_PROP_UINT32("revision", GICv3State, revision, 3), DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0), + DEFINE_PROP_BOOL("has-nmi", GICv3State, nmi_support, 0), DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0), /* * Compatibility property: force 8 bits of physical priority, even diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_dist.c +++ b/hw/intc/arm_gicv3_dist.c @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, * by GICD_TYPER.IDbits) * MBIS == 0 (message-based SPIs not supported) * SecurityExtn == 1 if security extns supported + * NMI = 1 if Non-maskable interrupt property is supported * CPUNumber == 0 since for us ARE is always 1 * ITLinesNumber == (((max SPI IntID + 1) / 32) - 1) */ @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, bool dvis = s->revision >= 4; *data = (1 << 25) | (1 << 24) | (dvis << 18) | (sec_extn << 10) | + (s->nmi_support << GICD_TYPER_NMI_SHIFT) | (s->lpi_enable << GICD_TYPER_LPIS_SHIFT) | (0xf << 19) | itlinesnumber; return true; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> So far, there is no FEAT_GICv3_NMI support in the in-kernel GIC, so make it an error to try to set has-nmi=true for the KVM GICv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Message-id: 20240407081733.3231820-15-ruanjinjie@huawei.com Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error **errp) return; } + if (s->nmi_support) { + error_setg(errp, "NMI is not supported with the in-kernel GIC"); + return; + } + gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL); for (i = 0; i < s->num_cpu; i++) { -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> A SPI, PPI or SGI interrupt can have non-maskable property. So maintain non-maskable property in PendingIrq and GICR/GICD. Since add new device state, it also needs to be migrated, so also save NMI info in vmstate_gicv3_cpu and vmstate_gicv3. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-16-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/intc/arm_gicv3_common.h | 4 ++++ hw/intc/arm_gicv3_common.c | 38 ++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ typedef struct { int irq; uint8_t prio; int grp; + bool nmi; } PendingIrq; struct GICv3CPUState { @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { uint32_t gicr_ienabler0; uint32_t gicr_ipendr0; uint32_t gicr_iactiver0; + uint32_t gicr_inmir0; uint32_t edge_trigger; /* ICFGR0 and ICFGR1 even bits */ uint32_t gicr_igrpmodr0; uint32_t gicr_nsacr; @@ -XXX,XX +XXX,XX @@ struct GICv3State { GIC_DECLARE_BITMAP(active); /* GICD_ISACTIVER */ GIC_DECLARE_BITMAP(level); /* Current level */ GIC_DECLARE_BITMAP(edge_trigger); /* GICD_ICFGR even bits */ + GIC_DECLARE_BITMAP(nmi); /* GICD_INMIR */ uint8_t gicd_ipriority[GICV3_MAXIRQ]; uint64_t gicd_irouter[GICV3_MAXIRQ]; /* Cached information: pointer to the cpu i/f for the CPUs specified @@ -XXX,XX +XXX,XX @@ GICV3_BITMAP_ACCESSORS(pending) GICV3_BITMAP_ACCESSORS(active) GICV3_BITMAP_ACCESSORS(level) GICV3_BITMAP_ACCESSORS(edge_trigger) +GICV3_BITMAP_ACCESSORS(nmi) #define TYPE_ARM_GICV3_COMMON "arm-gicv3-common" typedef struct ARMGICv3CommonClass ARMGICv3CommonClass; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_gicv3_gicv4 = { } }; +static bool gicv3_cpu_nmi_needed(void *opaque) +{ + GICv3CPUState *cs = opaque; + + return cs->gic->nmi_support; +} + +static const VMStateDescription vmstate_gicv3_cpu_nmi = { + .name = "arm_gicv3_cpu/nmi", + .version_id = 1, + .minimum_version_id = 1, + .needed = gicv3_cpu_nmi_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32(gicr_inmir0, GICv3CPUState), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3_cpu = { .name = "arm_gicv3_cpu", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3_cpu = { &vmstate_gicv3_cpu_virt, &vmstate_gicv3_cpu_sre_el1, &vmstate_gicv3_gicv4, + &vmstate_gicv3_cpu_nmi, NULL } }; @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_gicv3_gicd_no_migration_shift_bug = { } }; +static bool gicv3_nmi_needed(void *opaque) +{ + GICv3State *cs = opaque; + + return cs->nmi_support; +} + +const VMStateDescription vmstate_gicv3_gicd_nmi = { + .name = "arm_gicv3/gicd_nmi", + .version_id = 1, + .minimum_version_id = 1, + .needed = gicv3_nmi_needed, + .fields = (const VMStateField[]) { + VMSTATE_UINT32_ARRAY(nmi, GICv3State, GICV3_BMP_SIZE), + VMSTATE_END_OF_LIST() + } +}; + static const VMStateDescription vmstate_gicv3 = { .name = "arm_gicv3", .version_id = 1, @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_gicv3 = { }, .subsections = (const VMStateDescription * const []) { &vmstate_gicv3_gicd_no_migration_shift_bug, + &vmstate_gicv3_gicd_nmi, NULL } }; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add GICR_INMIR0 register and support access GICR_INMIR0. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-17-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 1 + hw/intc/arm_gicv3_redist.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICR_ICFGR1 (GICR_SGI_OFFSET + 0x0C04) #define GICR_IGRPMODR0 (GICR_SGI_OFFSET + 0x0D00) #define GICR_NSACR (GICR_SGI_OFFSET + 0x0E00) +#define GICR_INMIR0 (GICR_SGI_OFFSET + 0x0F80) /* VLPI redistributor registers, offsets from VLPI_base */ #define GICR_VPROPBASER (GICR_VLPI_OFFSET + 0x70) diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ static int gicr_ns_access(GICv3CPUState *cs, int irq) return extract32(cs->gicr_nsacr, irq * 2, 2); } +static void gicr_write_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs, + uint32_t *reg, uint32_t val) +{ + /* Helper routine to implement writing to a "set" register */ + val &= mask_group(cs, attrs); + *reg = val; + gicv3_redist_update(cs); +} + static void gicr_write_set_bitmap_reg(GICv3CPUState *cs, MemTxAttrs attrs, uint32_t *reg, uint32_t val) { @@ -XXX,XX +XXX,XX @@ static MemTxResult gicr_readl(GICv3CPUState *cs, hwaddr offset, *data = value; return MEMTX_OK; } + case GICR_INMIR0: + *data = cs->gic->nmi_support ? + gicr_read_bitmap_reg(cs, attrs, cs->gicr_inmir0) : 0; + return MEMTX_OK; case GICR_ICFGR0: case GICR_ICFGR1: { @@ -XXX,XX +XXX,XX @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset, gicv3_redist_update(cs); return MEMTX_OK; } + case GICR_INMIR0: + if (cs->gic->nmi_support) { + gicr_write_bitmap_reg(cs, attrs, &cs->gicr_inmir0, value); + } + return MEMTX_OK; + case GICR_ICFGR0: /* Register is all RAZ/WI or RAO/WI bits */ return MEMTX_OK; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Add GICD_INMIR, GICD_INMIRnE register and support access GICD_INMIR0. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-18-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 2 ++ hw/intc/arm_gicv3_dist.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICD_SGIR 0x0F00 #define GICD_CPENDSGIR 0x0F10 #define GICD_SPENDSGIR 0x0F20 +#define GICD_INMIR 0x0F80 +#define GICD_INMIRnE 0x3B00 #define GICD_IROUTER 0x6000 #define GICD_IDREGS 0xFFD0 diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_dist.c +++ b/hw/intc/arm_gicv3_dist.c @@ -XXX,XX +XXX,XX @@ static int gicd_ns_access(GICv3State *s, int irq) return extract32(s->gicd_nsacr[irq / 16], (irq % 16) * 2, 2); } +static void gicd_write_bitmap_reg(GICv3State *s, MemTxAttrs attrs, + uint32_t *bmp, maskfn *maskfn, + int offset, uint32_t val) +{ + /* + * Helper routine to implement writing to a "set" register + * (GICD_INMIR, etc). + * Semantics implemented here: + * RAZ/WI for SGIs, PPIs, unimplemented IRQs + * Bits corresponding to Group 0 or Secure Group 1 interrupts RAZ/WI. + * offset should be the offset in bytes of the register from the start + * of its group. + */ + int irq = offset * 8; + + if (irq < GIC_INTERNAL || irq >= s->num_irq) { + return; + } + val &= mask_group_and_nsacr(s, attrs, maskfn, irq); + *gic_bmp_ptr32(bmp, irq) = val; + gicv3_update(s, irq, 32); +} + static void gicd_write_set_bitmap_reg(GICv3State *s, MemTxAttrs attrs, uint32_t *bmp, maskfn *maskfn, @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, /* RAZ/WI since affinity routing is always enabled */ *data = 0; return true; + case GICD_INMIR ... GICD_INMIR + 0x7f: + *data = (!s->nmi_support) ? 0 : + gicd_read_bitmap_reg(s, attrs, s->nmi, NULL, + offset - GICD_INMIR); + return true; case GICD_IROUTER ... GICD_IROUTER + 0x1fdf: { uint64_t r; @@ -XXX,XX +XXX,XX @@ static bool gicd_writel(GICv3State *s, hwaddr offset, case GICD_SPENDSGIR ... GICD_SPENDSGIR + 0xf: /* RAZ/WI since affinity routing is always enabled */ return true; + case GICD_INMIR ... GICD_INMIR + 0x7f: + if (s->nmi_support) { + gicd_write_bitmap_reg(s, attrs, s->nmi, NULL, + offset - GICD_INMIR, value); + } + return true; case GICD_IROUTER ... GICD_IROUTER + 0x1fdf: { uint64_t r; -- 2.34.1 Add the NMIAR CPU interface registers which deal with acknowledging NMI. When introduce NMI interrupt, there are some updates to the semantics for the register ICC_IAR1_EL1 and ICC_HPPIR1_EL1. For ICC_IAR1_EL1 register, it should return 1022 if the intid has non-maskable property. And for ICC_NMIAR1_EL1 register, it should return 1023 if the intid do not have non-maskable property. Howerever, these are not necessary for ICC_HPPIR1_EL1 register. And the APR and RPR has NMI bits which should be handled correctly. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: Separate out whether cpuif supports NMI from whether the GIC proper (IRI) supports NMI] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-19-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 5 + include/hw/intc/arm_gicv3_common.h | 7 ++ hw/intc/arm_gicv3_cpuif.c | 147 ++++++++++++++++++++++++++++- hw/intc/trace-events | 1 + 4 files changed, 155 insertions(+), 5 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICC_CTLR_EL3_A3V (1U << 15) #define ICC_CTLR_EL3_NDS (1U << 17) +#define ICC_AP1R_EL1_NMI (1ULL << 63) +#define ICC_RPR_EL1_NSNMI (1ULL << 62) +#define ICC_RPR_EL1_NMI (1ULL << 63) + #define ICH_VMCR_EL2_VENG0_SHIFT 0 #define ICH_VMCR_EL2_VENG0 (1U << ICH_VMCR_EL2_VENG0_SHIFT) #define ICH_VMCR_EL2_VENG1_SHIFT 1 @@ -XXX,XX +XXX,XX @@ FIELD(VTE, RDBASE, 42, RDBASE_PROCNUM_LENGTH) /* Special interrupt IDs */ #define INTID_SECURE 1020 #define INTID_NONSECURE 1021 +#define INTID_NMI 1022 #define INTID_SPURIOUS 1023 /* Functions internal to the emulated GICv3 */ diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { /* This is temporary working state, to avoid a malloc in gicv3_update() */ bool seenbetter; + + /* + * Whether the CPU interface has NMI support (FEAT_GICv3_NMI). The + * CPU interface may support NMIs even when the GIC proper (what the + * spec calls the IRI; the redistributors and distributor) does not. + */ + bool nmi_support; }; /* diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "cpu.h" #include "target/arm/cpregs.h" +#include "target/arm/cpu-features.h" #include "sysemu/tcg.h" #include "sysemu/qtest.h" @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) return intid; } +static uint64_t icv_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + /* todo */ + uint64_t intid = INTID_SPURIOUS; + return intid; +} + static uint32_t icc_fullprio_mask(GICv3CPUState *cs) { /* @@ -XXX,XX +XXX,XX @@ static int icc_highest_active_prio(GICv3CPUState *cs) */ int i; + if (cs->nmi_support) { + /* + * If an NMI is active this takes precedence over anything else + * for priority purposes; the NMI bit is only in the AP1R0 bit. + * We return here the effective priority of the NMI, which is + * either 0x0 or 0x80. Callers will need to check NMI again for + * purposes of either setting the RPR register bits or for + * prioritization of NMI vs non-NMI. + */ + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + return 0; + } + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + return (cs->gic->gicd_ctlr & GICD_CTLR_DS) ? 0 : 0x80; + } + } + for (i = 0; i < icc_num_aprs(cs); i++) { uint32_t apr = cs->icc_apr[GICV3_G0][i] | cs->icc_apr[GICV3_G1][i] | cs->icc_apr[GICV3_G1NS][i]; @@ -XXX,XX +XXX,XX @@ static bool icc_hppi_can_preempt(GICv3CPUState *cs) */ int rprio; uint32_t mask; + ARMCPU *cpu = ARM_CPU(cs->cpu); + CPUARMState *env = &cpu->env; if (icc_no_enabled_hppi(cs)) { return false; } - if (cs->hppi.prio >= cs->icc_pmr_el1) { + if (cs->hppi.nmi) { + if (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) && + cs->hppi.grp == GICV3_G1NS) { + if (cs->icc_pmr_el1 < 0x80) { + return false; + } + if (arm_is_secure(env) && cs->icc_pmr_el1 == 0x80) { + return false; + } + } + } else if (cs->hppi.prio >= cs->icc_pmr_el1) { /* Priority mask masks this interrupt */ return false; } @@ -XXX,XX +XXX,XX @@ static bool icc_hppi_can_preempt(GICv3CPUState *cs) return true; } + if (cs->hppi.nmi && (cs->hppi.prio & mask) == (rprio & mask)) { + if (!(cs->icc_apr[cs->hppi.grp][0] & ICC_AP1R_EL1_NMI)) { + return true; + } + } + return false; } @@ -XXX,XX +XXX,XX @@ static void icc_activate_irq(GICv3CPUState *cs, int irq) int aprbit = prio >> (8 - cs->prebits); int regno = aprbit / 32; int regbit = aprbit % 32; + bool nmi = cs->hppi.nmi; - cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit); + if (nmi) { + cs->icc_apr[cs->hppi.grp][regno] |= ICC_AP1R_EL1_NMI; + } else { + cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit); + } if (irq < GIC_INTERNAL) { cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_iar0_read(CPUARMState *env, const ARMCPRegInfo *ri) static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); + int el = arm_current_el(env); uint64_t intid; if (icv_access(env, HCR_IMO)) { @@ -XXX,XX +XXX,XX @@ static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri) } if (!gicv3_intid_is_special(intid)) { - icc_activate_irq(cs, intid); + if (cs->hppi.nmi && env->cp15.sctlr_el[el] & SCTLR_NMI) { + intid = INTID_NMI; + } else { + icc_activate_irq(cs, intid); + } } trace_gicv3_icc_iar1_read(gicv3_redist_affid(cs), intid); return intid; } +static uint64_t icc_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) +{ + GICv3CPUState *cs = icc_cs_from_env(env); + uint64_t intid; + + if (icv_access(env, HCR_IMO)) { + return icv_nmiar1_read(env, ri); + } + + if (!icc_hppi_can_preempt(cs)) { + intid = INTID_SPURIOUS; + } else { + intid = icc_hppir1_value(cs, env); + } + + if (!gicv3_intid_is_special(intid)) { + if (!cs->hppi.nmi) { + intid = INTID_SPURIOUS; + } else { + icc_activate_irq(cs, intid); + } + } + + trace_gicv3_icc_nmiar1_read(gicv3_redist_affid(cs), intid); + return intid; +} + static void icc_drop_prio(GICv3CPUState *cs, int grp) { /* Drop the priority of the currently active interrupt in @@ -XXX,XX +XXX,XX @@ static void icc_drop_prio(GICv3CPUState *cs, int grp) if (!*papr) { continue; } + + if (i == 0 && cs->nmi_support && (*papr & ICC_AP1R_EL1_NMI)) { + *papr &= (~ICC_AP1R_EL1_NMI); + break; + } + /* Clear the lowest set bit */ *papr &= *papr - 1; break; @@ -XXX,XX +XXX,XX @@ static int icc_highest_active_group(GICv3CPUState *cs) */ int i; + if (cs->nmi_support) { + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + return GICV3_G1; + } + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + return GICV3_G1NS; + } + } + for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) { int g0ctz = ctz32(cs->icc_apr[GICV3_G0][i]); int g1ctz = ctz32(cs->icc_apr[GICV3_G1][i]); @@ -XXX,XX +XXX,XX @@ static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, return; } - cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->icc_apr[grp][regno] = value & (0xFFFFFFFFU | ICC_AP1R_EL1_NMI); + } else { + cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_update(cs); } @@ -XXX,XX +XXX,XX @@ static void icc_dir_write(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); - int prio; + uint64_t prio; if (icv_access(env, HCR_FMO | HCR_IMO)) { return icv_rpr_read(env, ri); @@ -XXX,XX +XXX,XX @@ static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) } } + if (cs->nmi_support) { + /* NMI info is reported in the high bits of RPR */ + if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env)) { + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NMI; + } + } else { + if (cs->icc_apr[GICV3_G1NS][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NSNMI; + } + if (cs->icc_apr[GICV3_G1][0] & ICC_AP1R_EL1_NMI) { + prio |= ICC_RPR_EL1_NMI; + } + } + } + trace_gicv3_icc_rpr_read(gicv3_redist_affid(cs), prio); return prio; } @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo gicv3_cpuif_icc_apxr23_reginfo[] = { }, }; +static const ARMCPRegInfo gicv3_cpuif_gicv3_nmi_reginfo[] = { + { .name = "ICC_NMIAR1_EL1", .state = ARM_CP_STATE_BOTH, + .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 5, + .type = ARM_CP_IO | ARM_CP_NO_RAW, + .access = PL1_R, .accessfn = gicv3_irq_access, + .readfn = icc_nmiar1_read, + }, +}; + static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); @@ -XXX,XX +XXX,XX @@ void gicv3_init_cpuif(GICv3State *s) */ define_arm_cp_regs(cpu, gicv3_cpuif_reginfo); + /* + * If the CPU implements FEAT_NMI and FEAT_GICv3 it must also + * implement FEAT_GICv3_NMI, which is the CPU interface part + * of NMI support. This is distinct from whether the GIC proper + * (redistributors and distributor) have NMI support. In QEMU + * that is a property of the GIC device in s->nmi_support; + * cs->nmi_support indicates the CPU interface's support. + */ + if (cpu_isar_feature(aa64_nmi, cpu)) { + cs->nmi_support = true; + define_arm_cp_regs(cpu, gicv3_cpuif_gicv3_nmi_reginfo); + } + /* * The CPU implementation specifies the number of supported * bits of physical priority. For backwards compatibility diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_cpuif_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel) "GICv3 CPU i/f gicv3_icc_generate_sgi(uint32_t cpuid, int irq, int irm, uint32_t aff, uint32_t targetlist) "GICv3 CPU i/f 0x%x generating SGI %d IRM %d target affinity 0x%xxx targetlist 0x%x" gicv3_icc_iar0_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IAR0 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_iar1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_IAR1 read cpu 0x%x value 0x%" PRIx64 +gicv3_icc_nmiar1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_NMIAR1 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_eoir_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICC_EOIR%d write cpu 0x%x value 0x%" PRIx64 gicv3_icc_hppir0_read(uint32_t cpu, uint64_t val) "GICv3 ICC_HPPIR0 read cpu 0x%x value 0x%" PRIx64 gicv3_icc_hppir1_read(uint32_t cpu, uint64_t val) "GICv3 ICC_HPPIR1 read cpu 0x%x value 0x%" PRIx64 -- 2.34.1 Implement icv_nmiar1_read() for icc_nmiar1_read(), so add definition for ICH_LR_EL2.NMI and ICH_AP1R_EL2.NMI bit. If FEAT_GICv3_NMI is supported, ich_ap_write() should consider ICV_AP1R_EL1.NMI bit. In icv_activate_irq() and icv_eoir_write(), the ICV_AP1R_EL1.NMI bit should be set or clear according to the Non-maskable property. And the RPR priority should also update the NMI bit according to the APR priority NMI bit. By the way, add gicv3_icv_nmiar1_read trace event. If the hpp irq is a NMI, the icv iar read should return 1022 and trap for NMI again Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [PMM: use cs->nmi_support instead of cs->gic->nmi_support] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-20-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 4 ++ hw/intc/arm_gicv3_cpuif.c | 105 +++++++++++++++++++++++++++++++++----- hw/intc/trace-events | 1 + 3 files changed, 98 insertions(+), 12 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICH_LR_EL2_PRIORITY_SHIFT 48 #define ICH_LR_EL2_PRIORITY_LENGTH 8 #define ICH_LR_EL2_PRIORITY_MASK (0xffULL << ICH_LR_EL2_PRIORITY_SHIFT) +#define ICH_LR_EL2_NMI (1ULL << 59) #define ICH_LR_EL2_GROUP (1ULL << 60) #define ICH_LR_EL2_HW (1ULL << 61) #define ICH_LR_EL2_STATE_SHIFT 62 @@ -XXX,XX +XXX,XX @@ FIELD(GICR_VPENDBASER, VALID, 63, 1) #define ICH_VTR_EL2_PREBITS_SHIFT 26 #define ICH_VTR_EL2_PRIBITS_SHIFT 29 +#define ICV_AP1R_EL1_NMI (1ULL << 63) +#define ICV_RPR_EL1_NMI (1ULL << 63) + /* ITS Registers */ FIELD(GITS_BASER, SIZE, 0, 8) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static int ich_highest_active_virt_prio(GICv3CPUState *cs) int i; int aprmax = ich_num_aprs(cs); + if (cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI) { + return 0x0; + } + for (i = 0; i < aprmax; i++) { uint32_t apr = cs->ich_apr[GICV3_G0][i] | cs->ich_apr[GICV3_G1NS][i]; @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) * correct behaviour. */ int prio = 0xff; + bool nmi = false; if (!(cs->ich_vmcr_el2 & (ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1))) { /* Both groups disabled, definitely nothing to do */ @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) for (i = 0; i < cs->num_list_regs; i++) { uint64_t lr = cs->ich_lr_el2[i]; + bool thisnmi; int thisprio; if (ich_lr_state(lr) != ICH_LR_EL2_STATE_PENDING) { @@ -XXX,XX +XXX,XX @@ static int hppvi_index(GICv3CPUState *cs) } } + thisnmi = lr & ICH_LR_EL2_NMI; thisprio = ich_lr_prio(lr); - if (thisprio < prio) { + if ((thisprio < prio) || ((thisprio == prio) && (thisnmi & (!nmi)))) { prio = thisprio; + nmi = thisnmi; idx = i; } } @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) * equivalent of these checks. */ int grp; + bool is_nmi; uint32_t mask, prio, rprio, vpmr; if (!(cs->ich_hcr_el2 & ICH_HCR_EL2_EN)) { @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) */ prio = ich_lr_prio(lr); + is_nmi = lr & ICH_LR_EL2_NMI; vpmr = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT, ICH_VMCR_EL2_VPMR_LENGTH); - if (prio >= vpmr) { + if (!is_nmi && prio >= vpmr) { /* Priority mask masks this interrupt */ return false; } @@ -XXX,XX +XXX,XX @@ static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr) return true; } + if ((prio & mask) == (rprio & mask) && is_nmi && + !(cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI)) { + return true; + } + return false; } @@ -XXX,XX +XXX,XX @@ static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); - cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->ich_apr[grp][regno] = value & (0xFFFFFFFFU | ICV_AP1R_EL1_NMI); + } else { + cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_virt_irq_fiq_update(cs); return; @@ -XXX,XX +XXX,XX @@ static void icv_ctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t icv_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri) { GICv3CPUState *cs = icc_cs_from_env(env); - int prio = ich_highest_active_virt_prio(cs); + uint64_t prio = ich_highest_active_virt_prio(cs); + + if (cs->ich_apr[GICV3_G1NS][0] & ICV_AP1R_EL1_NMI) { + prio |= ICV_RPR_EL1_NMI; + } trace_gicv3_icv_rpr_read(gicv3_redist_affid(cs), prio); return prio; @@ -XXX,XX +XXX,XX @@ static void icv_activate_irq(GICv3CPUState *cs, int idx, int grp) */ uint32_t mask = icv_gprio_mask(cs, grp); int prio = ich_lr_prio(cs->ich_lr_el2[idx]) & mask; + bool nmi = cs->ich_lr_el2[idx] & ICH_LR_EL2_NMI; int aprbit = prio >> (8 - cs->vprebits); int regno = aprbit / 32; int regbit = aprbit % 32; cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; cs->ich_lr_el2[idx] |= ICH_LR_EL2_STATE_ACTIVE_BIT; - cs->ich_apr[grp][regno] |= (1 << regbit); + + if (nmi) { + cs->ich_apr[grp][regno] |= ICV_AP1R_EL1_NMI; + } else { + cs->ich_apr[grp][regno] |= (1 << regbit); + } } static void icv_activate_vlpi(GICv3CPUState *cs) @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS; int idx = hppvi_index(cs); uint64_t intid = INTID_SPURIOUS; + int el = arm_current_el(env); if (idx == HPPVI_INDEX_VLPI) { if (cs->hppvlpi.grp == grp && icv_hppvlpi_can_preempt(cs)) { @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) } else if (idx >= 0) { uint64_t lr = cs->ich_lr_el2[idx]; int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; + bool nmi = env->cp15.sctlr_el[el] & SCTLR_NMI && lr & ICH_LR_EL2_NMI; if (thisgrp == grp && icv_hppi_can_preempt(cs, lr)) { intid = ich_lr_vintid(lr); if (!gicv3_intid_is_special(intid)) { - icv_activate_irq(cs, idx, grp); + if (!nmi) { + icv_activate_irq(cs, idx, grp); + } else { + intid = INTID_NMI; + } } else { /* Interrupt goes from Pending to Invalid */ cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; @@ -XXX,XX +XXX,XX @@ static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri) static uint64_t icv_nmiar1_read(CPUARMState *env, const ARMCPRegInfo *ri) { - /* todo */ + GICv3CPUState *cs = icc_cs_from_env(env); + int idx = hppvi_index(cs); uint64_t intid = INTID_SPURIOUS; + + if (idx >= 0 && idx != HPPVI_INDEX_VLPI) { + uint64_t lr = cs->ich_lr_el2[idx]; + int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; + + if ((thisgrp == GICV3_G1NS) && icv_hppi_can_preempt(cs, lr)) { + intid = ich_lr_vintid(lr); + if (!gicv3_intid_is_special(intid)) { + if (lr & ICH_LR_EL2_NMI) { + icv_activate_irq(cs, idx, GICV3_G1NS); + } else { + intid = INTID_SPURIOUS; + } + } else { + /* Interrupt goes from Pending to Invalid */ + cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT; + /* + * We will now return the (bogus) ID from the list register, + * as per the pseudocode. + */ + } + } + } + + trace_gicv3_icv_nmiar1_read(gicv3_redist_affid(cs), intid); + + gicv3_cpuif_virt_update(cs); + return intid; } @@ -XXX,XX +XXX,XX @@ static void icv_increment_eoicount(GICv3CPUState *cs) ICH_HCR_EL2_EOICOUNT_LENGTH, eoicount + 1); } -static int icv_drop_prio(GICv3CPUState *cs) +static int icv_drop_prio(GICv3CPUState *cs, bool *nmi) { /* Drop the priority of the currently active virtual interrupt * (favouring group 0 if there is a set active bit at @@ -XXX,XX +XXX,XX @@ static int icv_drop_prio(GICv3CPUState *cs) continue; } + if (i == 0 && cs->nmi_support && (*papr1 & ICV_AP1R_EL1_NMI)) { + *papr1 &= (~ICV_AP1R_EL1_NMI); + *nmi = true; + return 0xff; + } + /* We can't just use the bit-twiddling hack icc_drop_prio() does * because we need to return the bit number we cleared so * it can be compared against the list register's priority field. @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, int irq = value & 0xffffff; int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS; int idx, dropprio; + bool nmi = false; trace_gicv3_icv_eoir_write(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), value); @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, * error checks" (because that lets us avoid scanning the AP * registers twice). */ - dropprio = icv_drop_prio(cs); - if (dropprio == 0xff) { + dropprio = icv_drop_prio(cs, &nmi); + if (dropprio == 0xff && !nmi) { /* No active interrupt. It is CONSTRAINED UNPREDICTABLE * whether the list registers are checked in this * situation; we choose not to. @@ -XXX,XX +XXX,XX @@ static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t lr = cs->ich_lr_el2[idx]; int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0; int lr_gprio = ich_lr_prio(lr) & icv_gprio_mask(cs, grp); + bool thisnmi = lr & ICH_LR_EL2_NMI; - if (thisgrp == grp && lr_gprio == dropprio) { + if (thisgrp == grp && (lr_gprio == dropprio || (thisnmi & nmi))) { if (!icv_eoi_split(env, cs) || irq >= GICV3_LPI_INTID_START) { /* * Priority drop and deactivate not split: deactivate irq now. @@ -XXX,XX +XXX,XX @@ static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value); - cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + if (cs->nmi_support) { + cs->ich_apr[grp][regno] = value & (0xFFFFFFFFU | ICV_AP1R_EL1_NMI); + } else { + cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU; + } gicv3_cpuif_virt_irq_fiq_update(cs); } @@ -XXX,XX +XXX,XX @@ static void ich_lr_write(CPUARMState *env, const ARMCPRegInfo *ri, 8 - cs->vpribits, 0); } + /* Enforce RES0 bit in NMI field when FEAT_GICv3_NMI is not implemented */ + if (!cs->nmi_support) { + value &= ~ICH_LR_EL2_NMI; + } + cs->ich_lr_el2[regno] = value; gicv3_cpuif_virt_update(cs); } diff --git a/hw/intc/trace-events b/hw/intc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/trace-events +++ b/hw/intc/trace-events @@ -XXX,XX +XXX,XX @@ gicv3_icv_rpr_read(uint32_t cpu, uint64_t val) "GICv3 ICV_RPR read cpu 0x%x valu gicv3_icv_hppir_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_HPPIR%d read cpu 0x%x value 0x%" PRIx64 gicv3_icv_dir_write(uint32_t cpu, uint64_t val) "GICv3 ICV_DIR write cpu 0x%x value 0x%" PRIx64 gicv3_icv_iar_read(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_IAR%d read cpu 0x%x value 0x%" PRIx64 +gicv3_icv_nmiar1_read(uint32_t cpu, uint64_t val) "GICv3 ICV_NMIAR1 read cpu 0x%x value 0x%" PRIx64 gicv3_icv_eoir_write(int grp, uint32_t cpu, uint64_t val) "GICv3 ICV_EOIR%d write cpu 0x%x value 0x%" PRIx64 gicv3_cpuif_virt_update(uint32_t cpuid, int idx, int hppvlpi, int grp, int prio) "GICv3 CPU i/f 0x%x virt HPPI update LR index %d HPPVLPI %d grp %d prio %d" gicv3_cpuif_virt_set_irqs(uint32_t cpuid, int fiqlevel, int irqlevel) "GICv3 CPU i/f 0x%x virt HPPI update: setting FIQ %d IRQ %d" -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> If GICD_CTLR_DS bit is zero and the NMI is non-secure, the NMI priority is higher than 0x80, otherwise it is higher than 0x0. And save the interrupt non-maskable property in hppi.nmi to deliver NMI exception. Since both GICR and GICD can deliver NMI, it is both necessary to check whether the pending irq is NMI in gicv3_redist_update_noirqset and gicv3_update_noirqset. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-21-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3.c | 67 +++++++++++++++++++++++++++++++++----- hw/intc/arm_gicv3_common.c | 3 ++ hw/intc/arm_gicv3_redist.c | 3 ++ 3 files changed, 64 insertions(+), 9 deletions(-) diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gicv3.h" #include "gicv3_internal.h" -static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio) +static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio, bool nmi) { /* Return true if this IRQ at this priority should take * precedence over the current recorded highest priority @@ -XXX,XX +XXX,XX @@ static bool irqbetter(GICv3CPUState *cs, int irq, uint8_t prio) * is the same as this one (a property which the calling code * relies on). */ - if (prio < cs->hppi.prio) { - return true; + if (prio != cs->hppi.prio) { + return prio < cs->hppi.prio; } + + /* + * The same priority IRQ with non-maskable property should signal to + * the CPU as it have the priority higher than the labelled 0x80 or 0x00. + */ + if (nmi != cs->hppi.nmi) { + return nmi; + } + /* If multiple pending interrupts have the same priority then it is an * IMPDEF choice which of them to signal to the CPU. We choose to * signal the one with the lowest interrupt number. */ - if (prio == cs->hppi.prio && irq <= cs->hppi.irq) { + if (irq <= cs->hppi.irq) { return true; } return false; @@ -XXX,XX +XXX,XX @@ static uint32_t gicr_int_pending(GICv3CPUState *cs) return pend; } +static bool gicv3_get_priority(GICv3CPUState *cs, bool is_redist, int irq, + uint8_t *prio) +{ + uint32_t nmi = 0x0; + + if (is_redist) { + nmi = extract32(cs->gicr_inmir0, irq, 1); + } else { + nmi = *gic_bmp_ptr32(cs->gic->nmi, irq); + nmi = nmi & (1 << (irq & 0x1f)); + } + + if (nmi) { + /* DS = 0 & Non-secure NMI */ + if (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) && + ((is_redist && extract32(cs->gicr_igroupr0, irq, 1)) || + (!is_redist && gicv3_gicd_group_test(cs->gic, irq)))) { + *prio = 0x80; + } else { + *prio = 0x0; + } + + return true; + } + + if (is_redist) { + *prio = cs->gicr_ipriorityr[irq]; + } else { + *prio = cs->gic->gicd_ipriority[irq]; + } + + return false; +} + /* Update the interrupt status after state in a redistributor * or CPU interface has changed, but don't tell the CPU i/f. */ @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) uint8_t prio; int i; uint32_t pend; + bool nmi = false; /* Find out which redistributor interrupts are eligible to be * signaled to the CPU interface. @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) if (!(pend & (1 << i))) { continue; } - prio = cs->gicr_ipriorityr[i]; - if (irqbetter(cs, i, prio)) { + nmi = gicv3_get_priority(cs, true, i, &prio); + if (irqbetter(cs, i, prio, nmi)) { cs->hppi.irq = i; cs->hppi.prio = prio; + cs->hppi.nmi = nmi; seenbetter = true; } } @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable && (cs->gic->gicd_ctlr & GICD_CTLR_EN_GRP1NS) && (cs->hpplpi.prio != 0xff)) { - if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) { + if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio, cs->hpplpi.nmi)) { cs->hppi.irq = cs->hpplpi.irq; cs->hppi.prio = cs->hpplpi.prio; + cs->hppi.nmi = cs->hpplpi.nmi; cs->hppi.grp = cs->hpplpi.grp; seenbetter = true; } @@ -XXX,XX +XXX,XX @@ static void gicv3_update_noirqset(GICv3State *s, int start, int len) int i; uint8_t prio; uint32_t pend = 0; + bool nmi = false; assert(start >= GIC_INTERNAL); assert(len > 0); @@ -XXX,XX +XXX,XX @@ static void gicv3_update_noirqset(GICv3State *s, int start, int len) */ continue; } - prio = s->gicd_ipriority[i]; - if (irqbetter(cs, i, prio)) { + nmi = gicv3_get_priority(cs, false, i, &prio); + if (irqbetter(cs, i, prio, nmi)) { cs->hppi.irq = i; cs->hppi.prio = prio; + cs->hppi.nmi = nmi; cs->seenbetter = true; } } @@ -XXX,XX +XXX,XX @@ void gicv3_full_update_noirqset(GICv3State *s) for (i = 0; i < s->num_cpu; i++) { s->cpu[i].hppi.prio = 0xff; + s->cpu[i].hppi.nmi = false; } /* Note that we can guarantee that these functions will not diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_reset_hold(Object *obj) memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr)); cs->hppi.prio = 0xff; + cs->hppi.nmi = false; cs->hpplpi.prio = 0xff; + cs->hpplpi.nmi = false; cs->hppvlpi.prio = 0xff; + cs->hppvlpi.nmi = false; /* State in the CPU interface must *not* be reset here, because it * is part of the CPU's reset domain, not the GIC device's. diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ static void update_for_one_lpi(GICv3CPUState *cs, int irq, ((prio == hpp->prio) && (irq <= hpp->irq))) { hpp->irq = irq; hpp->prio = prio; + hpp->nmi = false; /* LPIs and vLPIs are always non-secure Grp1 interrupts */ hpp->grp = GICV3_G1NS; } @@ -XXX,XX +XXX,XX @@ static void update_for_all_lpis(GICv3CPUState *cs, uint64_t ptbase, int i, bit; hpp->prio = 0xff; + hpp->nmi = false; for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) { address_space_read(as, ptbase + i, MEMTXATTRS_UNSPECIFIED, &pend, 1); @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_vlpi_only(GICv3CPUState *cs) if (!FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID)) { cs->hppvlpi.prio = 0xff; + cs->hppvlpi.nmi = false; return; } -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> In CPU Interface, if the IRQ has the non-maskable property, report NMI to the corresponding PE. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-22-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) /* Tell the CPU about its highest priority pending interrupt */ int irqlevel = 0; int fiqlevel = 0; + int nmilevel = 0; ARMCPU *cpu = ARM_CPU(cs->cpu); CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) if (isfiq) { fiqlevel = 1; + } else if (cs->hppi.nmi) { + nmilevel = 1; } else { irqlevel = 1; } @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_update(GICv3CPUState *cs) qemu_set_irq(cs->parent_fiq, fiqlevel); qemu_set_irq(cs->parent_irq, irqlevel); + qemu_set_irq(cs->parent_nmi, nmilevel); } static uint64_t icc_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri) -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> In vCPU Interface, if the vIRQ has the non-maskable property, report vINMI to the corresponding vPE. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-23-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_cpuif.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) int idx; int irqlevel = 0; int fiqlevel = 0; + int nmilevel = 0; idx = hppvi_index(cs); trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx, @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) uint64_t lr = cs->ich_lr_el2[idx]; if (icv_hppi_can_preempt(cs, lr)) { - /* Virtual interrupts are simple: G0 are always FIQ, and G1 IRQ */ + /* + * Virtual interrupts are simple: G0 are always FIQ, and G1 are + * IRQ or NMI which depends on the ICH_LR<n>_EL2.NMI to have + * non-maskable property. + */ if (lr & ICH_LR_EL2_GROUP) { - irqlevel = 1; + if (lr & ICH_LR_EL2_NMI) { + nmilevel = 1; + } else { + irqlevel = 1; + } } else { fiqlevel = 1; } @@ -XXX,XX +XXX,XX @@ void gicv3_cpuif_virt_irq_fiq_update(GICv3CPUState *cs) trace_gicv3_cpuif_virt_set_irqs(gicv3_redist_affid(cs), fiqlevel, irqlevel); qemu_set_irq(cs->parent_vfiq, fiqlevel); qemu_set_irq(cs->parent_virq, irqlevel); + qemu_set_irq(cs->parent_vnmi, nmilevel); } static void gicv3_cpuif_virt_update(GICv3CPUState *cs) -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> Enable FEAT_NMI on the 'max' CPU. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240407081733.3231820-24-ruanjinjie@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_MTE (Memory Tagging Extension) - FEAT_MTE2 (Memory Tagging Extension) - FEAT_MTE3 (MTE Asymmetric Fault Handling) +- FEAT_NMI (Non-maskable Interrupt) - FEAT_NV (Nested Virtualization) - FEAT_NV2 (Enhanced nested virtualization support) - FEAT_PACIMP (Pointer authentication - IMPLEMENTATION DEFINED algorithm) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64PFR1, RAS_FRAC, 0); /* FEAT_RASv1p1 + FEAT_DoubleFault */ t = FIELD_DP64(t, ID_AA64PFR1, SME, 1); /* FEAT_SME */ t = FIELD_DP64(t, ID_AA64PFR1, CSV2_FRAC, 0); /* FEAT_CSV2_2 */ + t = FIELD_DP64(t, ID_AA64PFR1, NMI, 1); /* FEAT_NMI */ cpu->isar.id_aa64pfr1 = t; t = cpu->isar.id_aa64mmfr0; -- 2.34.1 From: Jinjie Ruan <ruanjinjie@huawei.com> If the CPU implements FEAT_NMI, then turn on the NMI support in the GICv3 too. It's permitted to have a configuration with FEAT_NMI in the CPU (and thus NMI support in the CPU interfaces too) but no NMI support in the distributor and redistributor, but this isn't a very useful setup as it's close to having no NMI support at all. We don't need to gate the enabling of NMI in the GIC behind a machine version property, because none of our current CPUs implement FEAT_NMI, and '-cpu max' is not something we maintain migration compatibility across versions for. So we can always enable the GIC NMI support when the CPU has it. Neither hvf nor KVM support NMI in the GIC yet, so we don't enable it unless we're using TCG. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240407081733.3231820-25-ruanjinjie@huawei.com [PMM: Update comment and commit message] Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_v2m(VirtMachineState *vms) vms->msi_controller = VIRT_MSI_CTRL_GICV2M; } +/* + * If the CPU has FEAT_NMI, then turn on the NMI support in the GICv3 too. + * It's permitted to have a configuration with NMI in the CPU (and thus the + * GICv3 CPU interface) but not in the distributor/redistributors, but it's + * not very useful. + */ +static bool gicv3_nmi_present(VirtMachineState *vms) +{ + ARMCPU *cpu = ARM_CPU(qemu_get_cpu(0)); + + return tcg_enabled() && cpu_isar_feature(aa64_nmi, cpu) && + (vms->gic_version != VIRT_GIC_VERSION_2); +} + static void create_gic(VirtMachineState *vms, MemoryRegion *mem) { MachineState *ms = MACHINE(vms); @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) vms->virt); } } + + if (gicv3_nmi_present(vms)) { + qdev_prop_set_bit(vms->gic, "has-nmi", true); + } + gicbusdev = SYS_BUS_DEVICE(vms->gic); sysbus_realize_and_unref(gicbusdev, &error_fatal); sysbus_mmio_map(gicbusdev, 0, vms->memmap[VIRT_GIC_DIST].base); -- 2.34.1 From: Anastasia Belova <abelova@astralinux.ru> In soc_dma_set_request() we try to set a bit in a uint64_t, but we do it with "1 << ch->num", which can't set any bits past 31; any use for a channel number of 32 or more would fail due to integer overflow. This doesn't happen in practice for our current use of this code, because the worst case is when we call soc_dma_init() with an argument of 32 for the number of channels, and QEMU builds with -fwrapv so the shift into the sign bit is well-defined. However, it's obviously not the intended behaviour of the code. Add casts to force the shift to be done as 64-bit arithmetic, allowing up to 64 channels. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: afbb5194d4 ("Handle on-chip DMA controllers in one place, convert OMAP DMA to use it.") Signed-off-by: Anastasia Belova <abelova@astralinux.ru> Message-id: 20240409115301.21829-1-abelova@astralinux.ru [PMM: Edit commit message to clarify that this doesn't actually bite us in our current usage of this code.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/dma/soc_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/dma/soc_dma.c b/hw/dma/soc_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/soc_dma.c +++ b/hw/dma/soc_dma.c @@ -XXX,XX +XXX,XX @@ void soc_dma_set_request(struct soc_dma_ch_s *ch, int level) dma->enabled_count += level - ch->enable; if (level) - dma->ch_enable_mask |= 1 << ch->num; + dma->ch_enable_mask |= (uint64_t)1 << ch->num; else - dma->ch_enable_mask &= ~(1 << ch->num); + dma->ch_enable_mask &= ~((uint64_t)1 << ch->num); if (level != ch->enable) { soc_dma_ch_freq_update(dma); -- 2.34.1 Ever since the bFLT format support was added in 2006, there has been a chunk of code in the file guarded by CONFIG_BINFMT_SHARED_FLAT which is supposedly for shared library support. This is not enabled and it's not possible to enable it, because if you do you'll run into the "#error needs checking" in the calc_reloc() function. Similarly, CONFIG_BINFMT_ZFLAT exists but can't be enabled because of an "#error code needs checking" in load_flat_file(). This code is obviously unfinished and has never been used; nobody in the intervening 18 years has complained about this or fixed it, so just delete the dead code. If anybody ever wants the feature they can always pull it out of git, or (perhaps better) write it from scratch based on the current Linux bFLT loader rather than the one of 18 years ago. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240411115313.680433-1-peter.maydell@linaro.org --- linux-user/flat.h | 5 +- linux-user/flatload.c | 293 ++---------------------------------------- 2 files changed, 11 insertions(+), 287 deletions(-) diff --git a/linux-user/flat.h b/linux-user/flat.h index XXXXXXX..XXXXXXX 100644 --- a/linux-user/flat.h +++ b/linux-user/flat.h @@ -XXX,XX +XXX,XX @@ #define FLAT_VERSION 0x00000004L -#ifdef CONFIG_BINFMT_SHARED_FLAT -#define MAX_SHARED_LIBS (4) -#else +/* QEMU doesn't support bflt shared libraries */ #define MAX_SHARED_LIBS (1) -#endif /* * To make everything easier to port and manage cross platform diff --git a/linux-user/flatload.c b/linux-user/flatload.c index XXXXXXX..XXXXXXX 100644 --- a/linux-user/flatload.c +++ b/linux-user/flatload.c @@ -XXX,XX +XXX,XX @@ * JAN/99 -- coded full program relocation (gerg@snapgear.com) */ -/* ??? ZFLAT and shared library support is currently disabled. */ - /****************************************************************************/ #include "qemu/osdep.h" @@ -XXX,XX +XXX,XX @@ struct lib_info { short loaded; /* Has this library been loaded? */ }; -#ifdef CONFIG_BINFMT_SHARED_FLAT -static int load_flat_shared_library(int id, struct lib_info *p); -#endif - struct linux_binprm; /****************************************************************************/ @@ -XXX,XX +XXX,XX @@ static int target_pread(int fd, abi_ulong ptr, abi_ulong len, unlock_user(buf, ptr, len); return ret; } -/****************************************************************************/ - -#ifdef CONFIG_BINFMT_ZFLAT - -#include <linux/zlib.h> - -#define LBUFSIZE 4000 - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -static int decompress_exec( - struct linux_binprm *bprm, - unsigned long offset, - char *dst, - long len, - int fd) -{ - unsigned char *buf; - z_stream strm; - loff_t fpos; - int ret, retval; - - DBG_FLT("decompress_exec(offset=%x,buf=%x,len=%x)\n",(int)offset, (int)dst, (int)len); - - memset(&strm, 0, sizeof(strm)); - strm.workspace = kmalloc(zlib_inflate_workspacesize(), GFP_KERNEL); - if (strm.workspace == NULL) { - DBG_FLT("binfmt_flat: no memory for decompress workspace\n"); - return -ENOMEM; - } - buf = kmalloc(LBUFSIZE, GFP_KERNEL); - if (buf == NULL) { - DBG_FLT("binfmt_flat: no memory for read buffer\n"); - retval = -ENOMEM; - goto out_free; - } - - /* Read in first chunk of data and parse gzip header. */ - fpos = offset; - ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos); - - strm.next_in = buf; - strm.avail_in = ret; - strm.total_in = 0; - - retval = -ENOEXEC; - - /* Check minimum size -- gzip header */ - if (ret < 10) { - DBG_FLT("binfmt_flat: file too small?\n"); - goto out_free_buf; - } - - /* Check gzip magic number */ - if ((buf[0] != 037) || ((buf[1] != 0213) && (buf[1] != 0236))) { - DBG_FLT("binfmt_flat: unknown compression magic?\n"); - goto out_free_buf; - } - - /* Check gzip method */ - if (buf[2] != 8) { - DBG_FLT("binfmt_flat: unknown compression method?\n"); - goto out_free_buf; - } - /* Check gzip flags */ - if ((buf[3] & ENCRYPTED) || (buf[3] & CONTINUATION) || - (buf[3] & RESERVED)) { - DBG_FLT("binfmt_flat: unknown flags?\n"); - goto out_free_buf; - } - - ret = 10; - if (buf[3] & EXTRA_FIELD) { - ret += 2 + buf[10] + (buf[11] << 8); - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (EXTRA)?\n"); - goto out_free_buf; - } - } - if (buf[3] & ORIG_NAME) { - for (; ret < LBUFSIZE && (buf[ret] != 0); ret++) - ; - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (ORIG_NAME)?\n"); - goto out_free_buf; - } - } - if (buf[3] & COMMENT) { - for (; ret < LBUFSIZE && (buf[ret] != 0); ret++) - ; - if (unlikely(LBUFSIZE == ret)) { - DBG_FLT("binfmt_flat: buffer overflow (COMMENT)?\n"); - goto out_free_buf; - } - } - - strm.next_in += ret; - strm.avail_in -= ret; - - strm.next_out = dst; - strm.avail_out = len; - strm.total_out = 0; - - if (zlib_inflateInit2(&strm, -MAX_WBITS) != Z_OK) { - DBG_FLT("binfmt_flat: zlib init failed?\n"); - goto out_free_buf; - } - - while ((ret = zlib_inflate(&strm, Z_NO_FLUSH)) == Z_OK) { - ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos); - if (ret <= 0) - break; - if (is_error(ret)) { - break; - } - len -= ret; - - strm.next_in = buf; - strm.avail_in = ret; - strm.total_in = 0; - } - - if (ret < 0) { - DBG_FLT("binfmt_flat: decompression failed (%d), %s\n", - ret, strm.msg); - goto out_zlib; - } - - retval = 0; -out_zlib: - zlib_inflateEnd(&strm); -out_free_buf: - kfree(buf); -out_free: - kfree(strm.workspace); -out: - return retval; -} - -#endif /* CONFIG_BINFMT_ZFLAT */ /****************************************************************************/ @@ -XXX,XX +XXX,XX @@ calc_reloc(abi_ulong r, struct lib_info *p, int curid, int internalp) abi_ulong text_len; abi_ulong start_code; -#ifdef CONFIG_BINFMT_SHARED_FLAT -#error needs checking - if (r == 0) - id = curid; /* Relocs of 0 are always self referring */ - else { - id = (r >> 24) & 0xff; /* Find ID for this reloc */ - r &= 0x00ffffff; /* Trim ID off here */ - } - if (id >= MAX_SHARED_LIBS) { - fprintf(stderr, "BINFMT_FLAT: reference 0x%x to shared library %d\n", - (unsigned) r, id); - goto failed; - } - if (curid != id) { - if (internalp) { - fprintf(stderr, "BINFMT_FLAT: reloc address 0x%x not " - "in same module (%d != %d)\n", - (unsigned) r, curid, id); - goto failed; - } else if (!p[id].loaded && is_error(load_flat_shared_library(id, p))) { - fprintf(stderr, "BINFMT_FLAT: failed to load library %d\n", id); - goto failed; - } - /* Check versioning information (i.e. time stamps) */ - if (p[id].build_date && p[curid].build_date - && p[curid].build_date < p[id].build_date) { - fprintf(stderr, "BINFMT_FLAT: library %d is younger than %d\n", - id, curid); - goto failed; - } - } -#else id = 0; -#endif start_brk = p[id].start_brk; start_data = p[id].start_data; @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, if (rev == OLD_FLAT_VERSION && flat_old_ram_flag(flags)) flags = FLAT_FLAG_RAM; -#ifndef CONFIG_BINFMT_ZFLAT if (flags & (FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA)) { - fprintf(stderr, "Support for ZFLAT executables is not enabled\n"); + fprintf(stderr, "ZFLAT executables are not supported\n"); return -ENOEXEC; } -#endif /* * calculate the extra space we need to map in @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, (int)(data_len + bss_len + stack_len), (int)datapos); fpos = ntohl(hdr->data_start); -#ifdef CONFIG_BINFMT_ZFLAT - if (flags & FLAT_FLAG_GZDATA) { - result = decompress_exec(bprm, fpos, (char *) datapos, - data_len + (relocs * sizeof(abi_ulong))) - } else -#endif - { - result = target_pread(bprm->src.fd, datapos, - data_len + (relocs * sizeof(abi_ulong)), - fpos); - } + result = target_pread(bprm->src.fd, datapos, + data_len + (relocs * sizeof(abi_ulong)), + fpos); if (result < 0) { fprintf(stderr, "Unable to read data+bss\n"); return result; @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, datapos = realdatastart + indx_len; reloc = (textpos + ntohl(hdr->reloc_start) + indx_len); -#ifdef CONFIG_BINFMT_ZFLAT -#error code needs checking - /* - * load it all in and treat it like a RAM load from now on - */ - if (flags & FLAT_FLAG_GZIP) { - result = decompress_exec(bprm, sizeof (struct flat_hdr), - (((char *) textpos) + sizeof (struct flat_hdr)), - (text_len + data_len + (relocs * sizeof(unsigned long)) - - sizeof (struct flat_hdr)), - 0); - memmove((void *) datapos, (void *) realdatastart, - data_len + (relocs * sizeof(unsigned long))); - } else if (flags & FLAT_FLAG_GZDATA) { - fpos = 0; - result = bprm->file->f_op->read(bprm->file, - (char *) textpos, text_len, &fpos); - if (!is_error(result)) { - result = decompress_exec(bprm, text_len, (char *) datapos, - data_len + (relocs * sizeof(unsigned long)), 0); - } - } - else -#endif - { - result = target_pread(bprm->src.fd, textpos, - text_len, 0); - if (result >= 0) { - result = target_pread(bprm->src.fd, datapos, - data_len + (relocs * sizeof(abi_ulong)), - ntohl(hdr->data_start)); - } + result = target_pread(bprm->src.fd, textpos, + text_len, 0); + if (result >= 0) { + result = target_pread(bprm->src.fd, datapos, + data_len + (relocs * sizeof(abi_ulong)), + ntohl(hdr->data_start)); } if (result < 0) { fprintf(stderr, "Unable to read code+data+bss\n"); @@ -XXX,XX +XXX,XX @@ static int load_flat_file(struct linux_binprm * bprm, /****************************************************************************/ -#ifdef CONFIG_BINFMT_SHARED_FLAT - -/* - * Load a shared library into memory. The library gets its own data - * segment (including bss) but not argv/argc/environ. - */ - -static int load_flat_shared_library(int id, struct lib_info *libs) -{ - struct linux_binprm bprm; - int res; - char buf[16]; - - /* Create the file name */ - sprintf(buf, "/lib/lib%d.so", id); - - /* Open the file up */ - bprm.filename = buf; - bprm.file = open_exec(bprm.filename); - res = PTR_ERR(bprm.file); - if (IS_ERR(bprm.file)) - return res; - - res = prepare_binprm(&bprm); - - if (!is_error(res)) { - res = load_flat_file(&bprm, libs, id, NULL); - } - if (bprm.file) { - allow_write_access(bprm.file); - fput(bprm.file); - bprm.file = NULL; - } - return(res); -} - -#endif /* CONFIG_BINFMT_SHARED_FLAT */ - int load_flt_binary(struct linux_binprm *bprm, struct image_info *info) { struct lib_info libinfo[MAX_SHARED_LIBS]; @@ -XXX,XX +XXX,XX @@ int load_flt_binary(struct linux_binprm *bprm, struct image_info *info) */ start_addr = libinfo[0].entry; -#ifdef CONFIG_BINFMT_SHARED_FLAT -#error here - for (i = MAX_SHARED_LIBS-1; i>0; i--) { - if (libinfo[i].loaded) { - /* Push previous first to call address */ - --sp; - if (put_user_ual(start_addr, sp)) - return -EFAULT; - start_addr = libinfo[i].entry; - } - } -#endif - /* Stash our initial stack pointer into the mm structure */ info->start_code = libinfo[0].start_code; info->end_code = libinfo[0].start_code + libinfo[0].text_len; -- 2.34.1 The npcm7xx_clk and npcm7xx_gcr device reset methods look at the ResetType argument and only handle RESET_TYPE_COLD, producing a warning if another reset type is passed. This is different from how every other three-phase-reset method we have works, and makes it difficult to add new reset types. A better pattern is "assume that any reset type you don't know about should be handled like RESET_TYPE_COLD"; switch these devices to do that. Then adding a new reset type will only need to touch those devices where its behaviour really needs to be different from the standard cold reset. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-2-peter.maydell@linaro.org --- hw/misc/npcm7xx_clk.c | 13 +++---------- hw/misc/npcm7xx_gcr.c | 12 ++++-------- 2 files changed, 7 insertions(+), 18 deletions(-) diff --git a/hw/misc/npcm7xx_clk.c b/hw/misc/npcm7xx_clk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_clk.c +++ b/hw/misc/npcm7xx_clk.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_clk_enter_reset(Object *obj, ResetType type) QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); - switch (type) { - case RESET_TYPE_COLD: - memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); - s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - npcm7xx_clk_update_all_clocks(s); - return; - } - + memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); + s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + npcm7xx_clk_update_all_clocks(s); /* * A small number of registers need to be reset on a core domain reset, * but no such reset type exists yet. */ - qemu_log_mask(LOG_UNIMP, "%s: reset type %d not implemented.", - __func__, type); } static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s) diff --git a/hw/misc/npcm7xx_gcr.c b/hw/misc/npcm7xx_gcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_gcr.c +++ b/hw/misc/npcm7xx_gcr.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gcr_enter_reset(Object *obj, ResetType type) QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); - switch (type) { - case RESET_TYPE_COLD: - memcpy(s->regs, cold_reset_values, sizeof(s->regs)); - s->regs[NPCM7XX_GCR_PWRON] = s->reset_pwron; - s->regs[NPCM7XX_GCR_MDLR] = s->reset_mdlr; - s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; - break; - } + memcpy(s->regs, cold_reset_values, sizeof(s->regs)); + s->regs[NPCM7XX_GCR_PWRON] = s->reset_pwron; + s->regs[NPCM7XX_GCR_MDLR] = s->reset_mdlr; + s->regs[NPCM7XX_GCR_INTCR3] = s->reset_intcr3; } static void npcm7xx_gcr_realize(DeviceState *dev, Error **errp) -- 2.34.1 Rather than directly calling the device's implementation of its 'hold' reset phase, call device_cold_reset(). This means we don't have to adjust this callsite when we add another argument to the function signature for the hold and exit reset methods. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-3-peter.maydell@linaro.org --- hw/i2c/allwinner-i2c.c | 3 +-- hw/sensor/adm1272.c | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/allwinner-i2c.c +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ static void allwinner_i2c_write(void *opaque, hwaddr offset, break; case TWI_SRST_REG: if (((value & TWI_SRST_MASK) == 0) && (s->srst & TWI_SRST_MASK)) { - /* Perform reset */ - allwinner_i2c_reset_hold(OBJECT(s)); + device_cold_reset(DEVICE(s)); } s->srst = value & TWI_SRST_MASK; break; diff --git a/hw/sensor/adm1272.c b/hw/sensor/adm1272.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1272.c +++ b/hw/sensor/adm1272.c @@ -XXX,XX +XXX,XX @@ static int adm1272_write_data(PMBusDevice *pmdev, const uint8_t *buf, break; case ADM1272_MFR_POWER_CYCLE: - adm1272_exit_reset((Object *)s); + device_cold_reset(DEVICE(s)); break; case ADM1272_HYSTERESIS_LOW: -- 2.34.1 We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. We should pass the type to all three of the phase methods to avoid having to do that. This coccinelle script adds the ResetType argument to the hold and exit phases of the Resettable interface. The first part of the script (rules holdfn_assigned, holdfn_defined, exitfn_assigned, exitfn_defined) update implementations of the interface within device models, both to change the signature of their method implementations and to pass on the reset type when they invoke reset on some other device. The second part of the script is various special cases: * method callsites in resettable_phase_hold(), resettable_phase_exit() and device_phases_reset() * updating the typedefs for the methods * isl_pmbus_vr.c has some code where one device's reset method directly calls the implementation of a different device's method Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-4-peter.maydell@linaro.org --- scripts/coccinelle/reset-type.cocci | 133 ++++++++++++++++++++++++++++ 1 file changed, 133 insertions(+) create mode 100644 scripts/coccinelle/reset-type.cocci diff --git a/scripts/coccinelle/reset-type.cocci b/scripts/coccinelle/reset-type.cocci new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/coccinelle/reset-type.cocci @@ -XXX,XX +XXX,XX @@ +// Convert device code using three-phase reset to add a ResetType +// argument to implementations of ResettableHoldPhase and +// ResettableEnterPhase methods. +// +// Copyright Linaro Ltd 2024 +// SPDX-License-Identifier: GPL-2.0-or-later +// +// for dir in include hw target; do \ +// spatch --macro-file scripts/cocci-macro-file.h \ +// --sp-file scripts/coccinelle/reset-type.cocci \ +// --keep-comments --smpl-spacing --in-place --include-headers \ +// --dir $dir; done +// +// This coccinelle script aims to produce a complete change that needs +// no human interaction, so as well as the generic "update device +// implementations of the hold and exit phase methods" it includes +// the special-case transformations needed for the core code and for +// one device model that does something a bit nonstandard. Those +// special cases are at the end of the file. + +// Look for where we use a function as a ResettableHoldPhase method, +// either by directly assigning it to phases.hold or by calling +// resettable_class_set_parent_phases, and remember the function name. +@ holdfn_assigned @ +identifier enterfn, holdfn, exitfn; +identifier rc; +expression e; +@@ +ResettableClass *rc; +... +( + rc->phases.hold = holdfn; +| + resettable_class_set_parent_phases(rc, enterfn, holdfn, exitfn, e); +) + +// Look for the definition of the function we found in holdfn_assigned, +// and add the new argument. If the function calls a hold function +// itself (probably chaining to the parent class reset) then add the +// new argument there too. +@ holdfn_defined @ +identifier holdfn_assigned.holdfn; +typedef Object; +identifier obj; +expression parent; +@@ +-holdfn(Object *obj) ++holdfn(Object *obj, ResetType type) +{ + <... +- parent.hold(obj) ++ parent.hold(obj, type) + ...> +} + +// Similarly for ResettableExitPhase. +@ exitfn_assigned @ +identifier enterfn, holdfn, exitfn; +identifier rc; +expression e; +@@ +ResettableClass *rc; +... +( + rc->phases.exit = exitfn; +| + resettable_class_set_parent_phases(rc, enterfn, holdfn, exitfn, e); +) +@ exitfn_defined @ +identifier exitfn_assigned.exitfn; +typedef Object; +identifier obj; +expression parent; +@@ +-exitfn(Object *obj) ++exitfn(Object *obj, ResetType type) +{ + <... +- parent.exit(obj) ++ parent.exit(obj, type) + ...> +} + +// SPECIAL CASES ONLY BELOW HERE +// We use a python scripted constraint on the position of the match +// to ensure that they only match in a particular function. See +// https://public-inbox.org/git/alpine.DEB.2.21.1808240652370.2344@hadrien/ +// which recommends this as the way to do "match only in this function". + +// Special case: isl_pmbus_vr.c has some reset methods calling others directly +@ isl_pmbus_vr @ +identifier obj; +@@ +- isl_pmbus_vr_exit_reset(obj); ++ isl_pmbus_vr_exit_reset(obj, type); + +// Special case: device_phases_reset() needs to pass RESET_TYPE_COLD +@ device_phases_reset_hold @ +expression obj; +identifier rc; +identifier phase; +position p : script:python() { p[0].current_element == "device_phases_reset" }; +@@ +- rc->phases.phase(obj)@p ++ rc->phases.phase(obj, RESET_TYPE_COLD) + +// Special case: in resettable_phase_hold() and resettable_phase_exit() +// we need to pass through the ResetType argument to the method being called +@ resettable_phase_hold @ +expression obj; +identifier rc; +position p : script:python() { p[0].current_element == "resettable_phase_hold" }; +@@ +- rc->phases.hold(obj)@p ++ rc->phases.hold(obj, type) +@ resettable_phase_exit @ +expression obj; +identifier rc; +position p : script:python() { p[0].current_element == "resettable_phase_exit" }; +@@ +- rc->phases.exit(obj)@p ++ rc->phases.exit(obj, type) +// Special case: the typedefs for the methods need to declare the new argument +@ phase_typedef_hold @ +identifier obj; +@@ +- typedef void (*ResettableHoldPhase)(Object *obj); ++ typedef void (*ResettableHoldPhase)(Object *obj, ResetType type); +@ phase_typedef_exit @ +identifier obj; +@@ +- typedef void (*ResettableExitPhase)(Object *obj); ++ typedef void (*ResettableExitPhase)(Object *obj, ResetType type); -- 2.34.1 We pass a ResetType argument to the Resettable class enter phase method, but we don't pass it to hold and exit, even though the callsites have it readily available. This means that if a device cared about the ResetType it would need to record it in the enter phase method to use later on. Pass the type to all three of the phase methods to avoid having to do that. Commit created with for dir in hw target include; do \ spatch --macro-file scripts/cocci-macro-file.h \ --sp-file scripts/coccinelle/reset-type.cocci \ --keep-comments --smpl-spacing --in-place \ --include-headers --dir $dir; done and no manual edits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-5-peter.maydell@linaro.org --- include/hw/resettable.h | 4 ++-- hw/adc/npcm7xx_adc.c | 2 +- hw/arm/pxa2xx_pic.c | 2 +- hw/arm/smmu-common.c | 2 +- hw/arm/smmuv3.c | 4 ++-- hw/arm/stellaris.c | 10 +++++----- hw/audio/asc.c | 2 +- hw/char/cadence_uart.c | 2 +- hw/char/sifive_uart.c | 2 +- hw/core/cpu-common.c | 2 +- hw/core/qdev.c | 4 ++-- hw/core/reset.c | 2 +- hw/core/resettable.c | 4 ++-- hw/display/virtio-vga.c | 4 ++-- hw/gpio/npcm7xx_gpio.c | 2 +- hw/gpio/pl061.c | 2 +- hw/gpio/stm32l4x5_gpio.c | 2 +- hw/hyperv/vmbus.c | 2 +- hw/i2c/allwinner-i2c.c | 2 +- hw/i2c/npcm7xx_smbus.c | 2 +- hw/input/adb.c | 2 +- hw/input/ps2.c | 12 ++++++------ hw/intc/arm_gic_common.c | 2 +- hw/intc/arm_gic_kvm.c | 4 ++-- hw/intc/arm_gicv3_common.c | 2 +- hw/intc/arm_gicv3_its.c | 4 ++-- hw/intc/arm_gicv3_its_common.c | 2 +- hw/intc/arm_gicv3_its_kvm.c | 4 ++-- hw/intc/arm_gicv3_kvm.c | 4 ++-- hw/intc/xics.c | 2 +- hw/m68k/q800-glue.c | 2 +- hw/misc/djmemc.c | 2 +- hw/misc/iosb.c | 2 +- hw/misc/mac_via.c | 8 ++++---- hw/misc/macio/cuda.c | 4 ++-- hw/misc/macio/pmu.c | 4 ++-- hw/misc/mos6522.c | 2 +- hw/misc/npcm7xx_mft.c | 2 +- hw/misc/npcm7xx_pwm.c | 2 +- hw/misc/stm32l4x5_exti.c | 2 +- hw/misc/stm32l4x5_rcc.c | 10 +++++----- hw/misc/stm32l4x5_syscfg.c | 2 +- hw/misc/xlnx-versal-cframe-reg.c | 2 +- hw/misc/xlnx-versal-crl.c | 2 +- hw/misc/xlnx-versal-pmc-iou-slcr.c | 2 +- hw/misc/xlnx-versal-trng.c | 2 +- hw/misc/xlnx-versal-xramc.c | 2 +- hw/misc/xlnx-zynqmp-apu-ctrl.c | 2 +- hw/misc/xlnx-zynqmp-crf.c | 2 +- hw/misc/zynq_slcr.c | 4 ++-- hw/net/can/xlnx-zynqmp-can.c | 2 +- hw/net/e1000.c | 2 +- hw/net/e1000e.c | 2 +- hw/net/igb.c | 2 +- hw/net/igbvf.c | 2 +- hw/nvram/xlnx-bbram.c | 2 +- hw/nvram/xlnx-versal-efuse-ctrl.c | 2 +- hw/nvram/xlnx-zynqmp-efuse.c | 2 +- hw/pci-bridge/cxl_root_port.c | 4 ++-- hw/pci-bridge/pcie_root_port.c | 2 +- hw/pci-host/bonito.c | 2 +- hw/pci-host/pnv_phb.c | 4 ++-- hw/pci-host/pnv_phb3_msi.c | 4 ++-- hw/pci/pci.c | 4 ++-- hw/rtc/mc146818rtc.c | 2 +- hw/s390x/css-bridge.c | 2 +- hw/sensor/adm1266.c | 2 +- hw/sensor/adm1272.c | 2 +- hw/sensor/isl_pmbus_vr.c | 10 +++++----- hw/sensor/max31785.c | 2 +- hw/sensor/max34451.c | 2 +- hw/ssi/npcm7xx_fiu.c | 2 +- hw/timer/etraxfs_timer.c | 2 +- hw/timer/npcm7xx_timer.c | 2 +- hw/usb/hcd-dwc2.c | 8 ++++---- hw/usb/xlnx-versal-usb2-ctrl-regs.c | 2 +- hw/virtio/virtio-pci.c | 2 +- target/arm/cpu.c | 4 ++-- target/avr/cpu.c | 4 ++-- target/cris/cpu.c | 4 ++-- target/hexagon/cpu.c | 4 ++-- target/i386/cpu.c | 4 ++-- target/loongarch/cpu.c | 4 ++-- target/m68k/cpu.c | 4 ++-- target/microblaze/cpu.c | 4 ++-- target/mips/cpu.c | 4 ++-- target/openrisc/cpu.c | 4 ++-- target/ppc/cpu_init.c | 4 ++-- target/riscv/cpu.c | 4 ++-- target/rx/cpu.c | 4 ++-- target/sh4/cpu.c | 4 ++-- target/sparc/cpu.c | 4 ++-- target/tricore/cpu.c | 4 ++-- target/xtensa/cpu.c | 4 ++-- 94 files changed, 150 insertions(+), 150 deletions(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ typedef enum ResetType { * the callback. */ typedef void (*ResettableEnterPhase)(Object *obj, ResetType type); -typedef void (*ResettableHoldPhase)(Object *obj); -typedef void (*ResettableExitPhase)(Object *obj); +typedef void (*ResettableHoldPhase)(Object *obj, ResetType type); +typedef void (*ResettableExitPhase)(Object *obj, ResetType type); typedef ResettableState * (*ResettableGetState)(Object *obj); typedef void (*ResettableTrFunction)(Object *obj); typedef ResettableTrFunction (*ResettableGetTrFunction)(Object *obj); diff --git a/hw/adc/npcm7xx_adc.c b/hw/adc/npcm7xx_adc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/adc/npcm7xx_adc.c +++ b/hw/adc/npcm7xx_adc.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_adc_enter_reset(Object *obj, ResetType type) npcm7xx_adc_reset(s); } -static void npcm7xx_adc_hold_reset(Object *obj) +static void npcm7xx_adc_hold_reset(Object *obj, ResetType type) { NPCM7xxADCState *s = NPCM7XX_ADC(obj); diff --git a/hw/arm/pxa2xx_pic.c b/hw/arm/pxa2xx_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_pic.c +++ b/hw/arm/pxa2xx_pic.c @@ -XXX,XX +XXX,XX @@ static int pxa2xx_pic_post_load(void *opaque, int version_id) return 0; } -static void pxa2xx_pic_reset_hold(Object *obj) +static void pxa2xx_pic_reset_hold(Object *obj, ResetType type) { PXA2xxPICState *s = PXA2XX_PIC(obj); diff --git a/hw/arm/smmu-common.c b/hw/arm/smmu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmu-common.c +++ b/hw/arm/smmu-common.c @@ -XXX,XX +XXX,XX @@ static void smmu_base_realize(DeviceState *dev, Error **errp) } } -static void smmu_base_reset_hold(Object *obj) +static void smmu_base_reset_hold(Object *obj, ResetType type) { SMMUState *s = ARM_SMMU(obj); diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -XXX,XX +XXX,XX @@ static void smmu_init_irq(SMMUv3State *s, SysBusDevice *dev) } } -static void smmu_reset_hold(Object *obj) +static void smmu_reset_hold(Object *obj, ResetType type) { SMMUv3State *s = ARM_SMMUV3(obj); SMMUv3Class *c = ARM_SMMUV3_GET_CLASS(s); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } smmuv3_init_regs(s); diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_enter(Object *obj, ResetType type) s->dcgc[0] = 1; } -static void stellaris_sys_reset_hold(Object *obj) +static void stellaris_sys_reset_hold(Object *obj, ResetType type) { ssys_state *s = STELLARIS_SYS(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) ssys_calculate_system_clock(s, true); } -static void stellaris_sys_reset_exit(Object *obj) +static void stellaris_sys_reset_exit(Object *obj, ResetType type) { } @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset_enter(Object *obj, ResetType type) i2c_end_transfer(s->bus); } -static void stellaris_i2c_reset_hold(Object *obj) +static void stellaris_i2c_reset_hold(Object *obj, ResetType type) { stellaris_i2c_state *s = STELLARIS_I2C(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_reset_hold(Object *obj) s->mcr = 0; } -static void stellaris_i2c_reset_exit(Object *obj) +static void stellaris_i2c_reset_exit(Object *obj, ResetType type) { stellaris_i2c_state *s = STELLARIS_I2C(obj); @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset_hold(Object *obj) +static void stellaris_adc_reset_hold(Object *obj, ResetType type) { StellarisADCState *s = STELLARIS_ADC(obj); int n; diff --git a/hw/audio/asc.c b/hw/audio/asc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/audio/asc.c +++ b/hw/audio/asc.c @@ -XXX,XX +XXX,XX @@ static void asc_fifo_init(ASCFIFOState *fs, int index) g_free(name); } -static void asc_reset_hold(Object *obj) +static void asc_reset_hold(Object *obj, ResetType type) { ASCState *s = ASC(obj); diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ static void cadence_uart_reset_init(Object *obj, ResetType type) s->r[R_TTRIG] = 0x00000020; } -static void cadence_uart_reset_hold(Object *obj) +static void cadence_uart_reset_hold(Object *obj, ResetType type) { CadenceUARTState *s = CADENCE_UART(obj); diff --git a/hw/char/sifive_uart.c b/hw/char/sifive_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/sifive_uart.c +++ b/hw/char/sifive_uart.c @@ -XXX,XX +XXX,XX @@ static void sifive_uart_reset_enter(Object *obj, ResetType type) s->rx_fifo_len = 0; } -static void sifive_uart_reset_hold(Object *obj) +static void sifive_uart_reset_hold(Object *obj, ResetType type) { SiFiveUARTState *s = SIFIVE_UART(obj); qemu_irq_lower(s->irq); diff --git a/hw/core/cpu-common.c b/hw/core/cpu-common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/cpu-common.c +++ b/hw/core/cpu-common.c @@ -XXX,XX +XXX,XX @@ void cpu_reset(CPUState *cpu) trace_cpu_reset(cpu->cpu_index); } -static void cpu_common_reset_hold(Object *obj) +static void cpu_common_reset_hold(Object *obj, ResetType type) { CPUState *cpu = CPU(obj); CPUClass *cc = CPU_GET_CLASS(cpu); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void device_phases_reset(DeviceState *dev) rc->phases.enter(OBJECT(dev), RESET_TYPE_COLD); } if (rc->phases.hold) { - rc->phases.hold(OBJECT(dev)); + rc->phases.hold(OBJECT(dev), RESET_TYPE_COLD); } if (rc->phases.exit) { - rc->phases.exit(OBJECT(dev)); + rc->phases.exit(OBJECT(dev), RESET_TYPE_COLD); } } diff --git a/hw/core/reset.c b/hw/core/reset.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/reset.c +++ b/hw/core/reset.c @@ -XXX,XX +XXX,XX @@ static ResettableState *legacy_reset_get_state(Object *obj) return &lr->reset_state; } -static void legacy_reset_hold(Object *obj) +static void legacy_reset_hold(Object *obj, ResetType type) { LegacyReset *lr = LEGACY_RESET(obj); diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ static void resettable_phase_hold(Object *obj, void *opaque, ResetType type) trace_resettable_transitional_function(obj, obj_typename); tr_func(obj); } else if (rc->phases.hold) { - rc->phases.hold(obj); + rc->phases.hold(obj, type); } } trace_resettable_phase_hold_end(obj, obj_typename, s->count); @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) if (--s->count == 0) { trace_resettable_phase_exit_exec(obj, obj_typename, !!rc->phases.exit); if (rc->phases.exit && !resettable_get_tr_func(rc, obj)) { - rc->phases.exit(obj); + rc->phases.exit(obj, type); } } s->exit_phase_in_progress = false; diff --git a/hw/display/virtio-vga.c b/hw/display/virtio-vga.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/virtio-vga.c +++ b/hw/display/virtio-vga.c @@ -XXX,XX +XXX,XX @@ static void virtio_vga_base_realize(VirtIOPCIProxy *vpci_dev, Error **errp) } } -static void virtio_vga_base_reset_hold(Object *obj) +static void virtio_vga_base_reset_hold(Object *obj, ResetType type) { VirtIOVGABaseClass *klass = VIRTIO_VGA_BASE_GET_CLASS(obj); VirtIOVGABase *vvga = VIRTIO_VGA_BASE(obj); /* reset virtio-gpu */ if (klass->parent_phases.hold) { - klass->parent_phases.hold(obj); + klass->parent_phases.hold(obj, type); } /* reset vga */ diff --git a/hw/gpio/npcm7xx_gpio.c b/hw/gpio/npcm7xx_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/npcm7xx_gpio.c +++ b/hw/gpio/npcm7xx_gpio.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_gpio_enter_reset(Object *obj, ResetType type) s->regs[NPCM7XX_GPIO_ODSC] = s->reset_odsc; } -static void npcm7xx_gpio_hold_reset(Object *obj) +static void npcm7xx_gpio_hold_reset(Object *obj, ResetType type) { NPCM7xxGPIOState *s = NPCM7XX_GPIO(obj); diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/pl061.c +++ b/hw/gpio/pl061.c @@ -XXX,XX +XXX,XX @@ static void pl061_enter_reset(Object *obj, ResetType type) s->amsel = 0; } -static void pl061_hold_reset(Object *obj) +static void pl061_hold_reset(Object *obj, ResetType type) { PL061State *s = PL061(obj); int i, level; diff --git a/hw/gpio/stm32l4x5_gpio.c b/hw/gpio/stm32l4x5_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/stm32l4x5_gpio.c +++ b/hw/gpio/stm32l4x5_gpio.c @@ -XXX,XX +XXX,XX @@ static bool is_push_pull(Stm32l4x5GpioState *s, unsigned pin) return extract32(s->otyper, pin, 1) == 0; } -static void stm32l4x5_gpio_reset_hold(Object *obj) +static void stm32l4x5_gpio_reset_hold(Object *obj, ResetType type) { Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); diff --git a/hw/hyperv/vmbus.c b/hw/hyperv/vmbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hyperv/vmbus.c +++ b/hw/hyperv/vmbus.c @@ -XXX,XX +XXX,XX @@ static void vmbus_unrealize(BusState *bus) qemu_mutex_destroy(&vmbus->rx_queue_lock); } -static void vmbus_reset_hold(Object *obj) +static void vmbus_reset_hold(Object *obj, ResetType type) { vmbus_deinit(VMBUS(obj)); } diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/allwinner-i2c.c +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ static inline bool allwinner_i2c_interrupt_is_enabled(AWI2CState *s) return s->cntr & TWI_CNTR_INT_EN; } -static void allwinner_i2c_reset_hold(Object *obj) +static void allwinner_i2c_reset_hold(Object *obj, ResetType type) { AWI2CState *s = AW_I2C(obj); diff --git a/hw/i2c/npcm7xx_smbus.c b/hw/i2c/npcm7xx_smbus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/npcm7xx_smbus.c +++ b/hw/i2c/npcm7xx_smbus.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_smbus_enter_reset(Object *obj, ResetType type) s->rx_cur = 0; } -static void npcm7xx_smbus_hold_reset(Object *obj) +static void npcm7xx_smbus_hold_reset(Object *obj, ResetType type) { NPCM7xxSMBusState *s = NPCM7XX_SMBUS(obj); diff --git a/hw/input/adb.c b/hw/input/adb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/adb.c +++ b/hw/input/adb.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_adb_bus = { } }; -static void adb_bus_reset_hold(Object *obj) +static void adb_bus_reset_hold(Object *obj, ResetType type) { ADBBusState *adb_bus = ADB_BUS(obj); diff --git a/hw/input/ps2.c b/hw/input/ps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/input/ps2.c +++ b/hw/input/ps2.c @@ -XXX,XX +XXX,XX @@ void ps2_write_mouse(PS2MouseState *s, int val) } } -static void ps2_reset_hold(Object *obj) +static void ps2_reset_hold(Object *obj, ResetType type) { PS2State *s = PS2_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_reset_hold(Object *obj) ps2_reset_queue(s); } -static void ps2_reset_exit(Object *obj) +static void ps2_reset_exit(Object *obj, ResetType type) { PS2State *s = PS2_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_common_post_load(PS2State *s) q->cwptr = ccount ? (q->rptr + ccount) & (PS2_BUFFER_SIZE - 1) : -1; } -static void ps2_kbd_reset_hold(Object *obj) +static void ps2_kbd_reset_hold(Object *obj, ResetType type) { PS2DeviceClass *ps2dc = PS2_DEVICE_GET_CLASS(obj); PS2KbdState *s = PS2_KBD_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_kbd_reset_hold(Object *obj) trace_ps2_kbd_reset(s); if (ps2dc->parent_phases.hold) { - ps2dc->parent_phases.hold(obj); + ps2dc->parent_phases.hold(obj, type); } s->scan_enabled = 1; @@ -XXX,XX +XXX,XX @@ static void ps2_kbd_reset_hold(Object *obj) s->modifiers = 0; } -static void ps2_mouse_reset_hold(Object *obj) +static void ps2_mouse_reset_hold(Object *obj, ResetType type) { PS2DeviceClass *ps2dc = PS2_DEVICE_GET_CLASS(obj); PS2MouseState *s = PS2_MOUSE_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void ps2_mouse_reset_hold(Object *obj) trace_ps2_mouse_reset(s); if (ps2dc->parent_phases.hold) { - ps2dc->parent_phases.hold(obj); + ps2dc->parent_phases.hold(obj, type); } s->mouse_status = 0; diff --git a/hw/intc/arm_gic_common.c b/hw/intc/arm_gic_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_common.c +++ b/hw/intc/arm_gic_common.c @@ -XXX,XX +XXX,XX @@ static inline void arm_gic_common_reset_irq_state(GICState *s, int cidx, } } -static void arm_gic_common_reset_hold(Object *obj) +static void arm_gic_common_reset_hold(Object *obj, ResetType type) { GICState *s = ARM_GIC_COMMON(obj); int i, j; diff --git a/hw/intc/arm_gic_kvm.c b/hw/intc/arm_gic_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gic_kvm.c +++ b/hw/intc/arm_gic_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gic_get(GICState *s) } } -static void kvm_arm_gic_reset_hold(Object *obj) +static void kvm_arm_gic_reset_hold(Object *obj, ResetType type) { GICState *s = ARM_GIC_COMMON(obj); KVMARMGICClass *kgc = KVM_ARM_GIC_GET_CLASS(s); if (kgc->parent_phases.hold) { - kgc->parent_phases.hold(obj); + kgc->parent_phases.hold(obj, type); } if (kvm_arm_gic_can_save_restore(s)) { diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_finalize(Object *obj) g_free(s->redist_region_count); } -static void arm_gicv3_common_reset_hold(Object *obj) +static void arm_gicv3_common_reset_hold(Object *obj, ResetType type) { GICv3State *s = ARM_GICV3_COMMON(obj); int i; diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static void gicv3_arm_its_realize(DeviceState *dev, Error **errp) } } -static void gicv3_its_reset_hold(Object *obj) +static void gicv3_its_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } /* Quiescent bit reset to 1 */ diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its_common.c +++ b/hw/intc/arm_gicv3_its_common.c @@ -XXX,XX +XXX,XX @@ void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops, msi_nonbroken = true; } -static void gicv3_its_common_reset_hold(Object *obj) +static void gicv3_its_common_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its_kvm.c +++ b/hw/intc/arm_gicv3_its_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_its_post_load(GICv3ITSState *s) GITS_CTLR, &s->ctlr, true, &error_abort); } -static void kvm_arm_its_reset_hold(Object *obj) +static void kvm_arm_its_reset_hold(Object *obj, ResetType type) { GICv3ITSState *s = ARM_GICV3_ITS_COMMON(obj); KVMARMITSClass *c = KVM_ARM_ITS_GET_CLASS(s); int i; if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } if (kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL, diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_icc_reset(CPUARMState *env, const ARMCPRegInfo *ri) c->icc_ctlr_el1[GICV3_S] = c->icc_ctlr_el1[GICV3_NS]; } -static void kvm_arm_gicv3_reset_hold(Object *obj) +static void kvm_arm_gicv3_reset_hold(Object *obj, ResetType type) { GICv3State *s = ARM_GICV3_COMMON(obj); KVMARMGICv3Class *kgc = KVM_ARM_GICV3_GET_CLASS(s); @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_reset_hold(Object *obj) DPRINTF("Reset\n"); if (kgc->parent_phases.hold) { - kgc->parent_phases.hold(obj); + kgc->parent_phases.hold(obj, type); } if (s->migration_blocker) { diff --git a/hw/intc/xics.c b/hw/intc/xics.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xics.c +++ b/hw/intc/xics.c @@ -XXX,XX +XXX,XX @@ static void ics_reset_irq(ICSIRQState *irq) irq->saved_priority = 0xff; } -static void ics_reset_hold(Object *obj) +static void ics_reset_hold(Object *obj, ResetType type) { ICSState *ics = ICS(obj); g_autofree uint8_t *flags = g_malloc(ics->nr_irqs); diff --git a/hw/m68k/q800-glue.c b/hw/m68k/q800-glue.c index XXXXXXX..XXXXXXX 100644 --- a/hw/m68k/q800-glue.c +++ b/hw/m68k/q800-glue.c @@ -XXX,XX +XXX,XX @@ static void glue_nmi_release(void *opaque) GLUE_set_irq(s, GLUE_IRQ_IN_NMI, 0); } -static void glue_reset_hold(Object *obj) +static void glue_reset_hold(Object *obj, ResetType type) { GLUEState *s = GLUE(obj); diff --git a/hw/misc/djmemc.c b/hw/misc/djmemc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/djmemc.c +++ b/hw/misc/djmemc.c @@ -XXX,XX +XXX,XX @@ static void djmemc_init(Object *obj) sysbus_init_mmio(sbd, &s->mem_regs); } -static void djmemc_reset_hold(Object *obj) +static void djmemc_reset_hold(Object *obj, ResetType type) { DJMEMCState *s = DJMEMC(obj); diff --git a/hw/misc/iosb.c b/hw/misc/iosb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/iosb.c +++ b/hw/misc/iosb.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps iosb_mmio_ops = { .endianness = DEVICE_BIG_ENDIAN, }; -static void iosb_reset_hold(Object *obj) +static void iosb_reset_hold(Object *obj, ResetType type) { IOSBState *s = IOSB(obj); diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mac_via.c +++ b/hw/misc/mac_via.c @@ -XXX,XX +XXX,XX @@ static int via1_post_load(void *opaque, int version_id) } /* VIA 1 */ -static void mos6522_q800_via1_reset_hold(Object *obj) +static void mos6522_q800_via1_reset_hold(Object *obj, ResetType type) { MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(obj); MOS6522State *ms = MOS6522(v1s); @@ -XXX,XX +XXX,XX @@ static void mos6522_q800_via1_reset_hold(Object *obj) ADBBusState *adb_bus = &v1s->adb_bus; if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; @@ -XXX,XX +XXX,XX @@ static void mos6522_q800_via2_portB_write(MOS6522State *s) } } -static void mos6522_q800_via2_reset_hold(Object *obj) +static void mos6522_q800_via2_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; diff --git a/hw/misc/macio/cuda.c b/hw/misc/macio/cuda.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/macio/cuda.c +++ b/hw/misc/macio/cuda.c @@ -XXX,XX +XXX,XX @@ static void mos6522_cuda_portB_write(MOS6522State *s) cuda_update(cs); } -static void mos6522_cuda_reset_hold(Object *obj) +static void mos6522_cuda_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = CUDA_TIMER_FREQ; diff --git a/hw/misc/macio/pmu.c b/hw/misc/macio/pmu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/macio/pmu.c +++ b/hw/misc/macio/pmu.c @@ -XXX,XX +XXX,XX @@ static void mos6522_pmu_portB_write(MOS6522State *s) pmu_update(ps); } -static void mos6522_pmu_reset_hold(Object *obj) +static void mos6522_pmu_reset_hold(Object *obj, ResetType type) { MOS6522State *ms = MOS6522(obj); MOS6522PMUState *mps = container_of(ms, MOS6522PMUState, parent_obj); @@ -XXX,XX +XXX,XX @@ static void mos6522_pmu_reset_hold(Object *obj) MOS6522DeviceClass *mdc = MOS6522_GET_CLASS(ms); if (mdc->parent_phases.hold) { - mdc->parent_phases.hold(obj); + mdc->parent_phases.hold(obj, type); } ms->timers[0].frequency = VIA_TIMER_FREQ; diff --git a/hw/misc/mos6522.c b/hw/misc/mos6522.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/mos6522.c +++ b/hw/misc/mos6522.c @@ -XXX,XX +XXX,XX @@ const VMStateDescription vmstate_mos6522 = { } }; -static void mos6522_reset_hold(Object *obj) +static void mos6522_reset_hold(Object *obj, ResetType type) { MOS6522State *s = MOS6522(obj); diff --git a/hw/misc/npcm7xx_mft.c b/hw/misc/npcm7xx_mft.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_mft.c +++ b/hw/misc/npcm7xx_mft.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_mft_enter_reset(Object *obj, ResetType type) npcm7xx_mft_reset(s); } -static void npcm7xx_mft_hold_reset(Object *obj) +static void npcm7xx_mft_hold_reset(Object *obj, ResetType type) { NPCM7xxMFTState *s = NPCM7XX_MFT(obj); diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_enter_reset(Object *obj, ResetType type) s->piir = 0x00000000; } -static void npcm7xx_pwm_hold_reset(Object *obj) +static void npcm7xx_pwm_hold_reset(Object *obj, ResetType type) { NPCM7xxPWMState *s = NPCM7XX_PWM(obj); int i; diff --git a/hw/misc/stm32l4x5_exti.c b/hw/misc/stm32l4x5_exti.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_exti.c +++ b/hw/misc/stm32l4x5_exti.c @@ -XXX,XX +XXX,XX @@ static unsigned configurable_mask(unsigned bank) return valid_mask(bank) & ~exti_romask[bank]; } -static void stm32l4x5_exti_reset_hold(Object *obj) +static void stm32l4x5_exti_reset_hold(Object *obj, ResetType type) { Stm32l4x5ExtiState *s = STM32L4X5_EXTI(obj); diff --git a/hw/misc/stm32l4x5_rcc.c b/hw/misc/stm32l4x5_rcc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_rcc.c +++ b/hw/misc/stm32l4x5_rcc.c @@ -XXX,XX +XXX,XX @@ static void clock_mux_reset_enter(Object *obj, ResetType type) set_clock_mux_init_info(s, s->id); } -static void clock_mux_reset_hold(Object *obj) +static void clock_mux_reset_hold(Object *obj, ResetType type) { RccClockMuxState *s = RCC_CLOCK_MUX(obj); clock_mux_update(s, true); } -static void clock_mux_reset_exit(Object *obj) +static void clock_mux_reset_exit(Object *obj, ResetType type) { RccClockMuxState *s = RCC_CLOCK_MUX(obj); clock_mux_update(s, false); @@ -XXX,XX +XXX,XX @@ static void pll_reset_enter(Object *obj, ResetType type) set_pll_init_info(s, s->id); } -static void pll_reset_hold(Object *obj) +static void pll_reset_hold(Object *obj, ResetType type) { RccPllState *s = RCC_PLL(obj); pll_update(s, true); } -static void pll_reset_exit(Object *obj) +static void pll_reset_exit(Object *obj, ResetType type) { RccPllState *s = RCC_PLL(obj); pll_update(s, false); @@ -XXX,XX +XXX,XX @@ static void rcc_update_csr(Stm32l4x5RccState *s) rcc_update_irq(s); } -static void stm32l4x5_rcc_reset_hold(Object *obj) +static void stm32l4x5_rcc_reset_hold(Object *obj, ResetType type) { Stm32l4x5RccState *s = STM32L4X5_RCC(obj); s->cr = 0x00000063; diff --git a/hw/misc/stm32l4x5_syscfg.c b/hw/misc/stm32l4x5_syscfg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/stm32l4x5_syscfg.c +++ b/hw/misc/stm32l4x5_syscfg.c @@ -XXX,XX +XXX,XX @@ #define NUM_LINES_PER_EXTICR_REG 4 -static void stm32l4x5_syscfg_hold_reset(Object *obj) +static void stm32l4x5_syscfg_hold_reset(Object *obj, ResetType type) { Stm32l4x5SyscfgState *s = STM32L4X5_SYSCFG(obj); diff --git a/hw/misc/xlnx-versal-cframe-reg.c b/hw/misc/xlnx-versal-cframe-reg.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-cframe-reg.c +++ b/hw/misc/xlnx-versal-cframe-reg.c @@ -XXX,XX +XXX,XX @@ static void cframe_reg_reset_enter(Object *obj, ResetType type) } } -static void cframe_reg_reset_hold(Object *obj) +static void cframe_reg_reset_hold(Object *obj, ResetType type) { XlnxVersalCFrameReg *s = XLNX_VERSAL_CFRAME_REG(obj); diff --git a/hw/misc/xlnx-versal-crl.c b/hw/misc/xlnx-versal-crl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-crl.c +++ b/hw/misc/xlnx-versal-crl.c @@ -XXX,XX +XXX,XX @@ static void crl_reset_enter(Object *obj, ResetType type) } } -static void crl_reset_hold(Object *obj) +static void crl_reset_hold(Object *obj, ResetType type) { XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); diff --git a/hw/misc/xlnx-versal-pmc-iou-slcr.c b/hw/misc/xlnx-versal-pmc-iou-slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-pmc-iou-slcr.c +++ b/hw/misc/xlnx-versal-pmc-iou-slcr.c @@ -XXX,XX +XXX,XX @@ static void xlnx_versal_pmc_iou_slcr_reset_init(Object *obj, ResetType type) } } -static void xlnx_versal_pmc_iou_slcr_reset_hold(Object *obj) +static void xlnx_versal_pmc_iou_slcr_reset_hold(Object *obj, ResetType type) { XlnxVersalPmcIouSlcr *s = XILINX_VERSAL_PMC_IOU_SLCR(obj); diff --git a/hw/misc/xlnx-versal-trng.c b/hw/misc/xlnx-versal-trng.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-trng.c +++ b/hw/misc/xlnx-versal-trng.c @@ -XXX,XX +XXX,XX @@ static void trng_unrealize(DeviceState *dev) s->prng = NULL; } -static void trng_reset_hold(Object *obj) +static void trng_reset_hold(Object *obj, ResetType type) { trng_reset(XLNX_VERSAL_TRNG(obj)); } diff --git a/hw/misc/xlnx-versal-xramc.c b/hw/misc/xlnx-versal-xramc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-versal-xramc.c +++ b/hw/misc/xlnx-versal-xramc.c @@ -XXX,XX +XXX,XX @@ static void xram_ctrl_reset_enter(Object *obj, ResetType type) ARRAY_FIELD_DP32(s->regs, XRAM_IMP, SIZE, s->cfg.encoded_size); } -static void xram_ctrl_reset_hold(Object *obj) +static void xram_ctrl_reset_hold(Object *obj, ResetType type) { XlnxXramCtrl *s = XLNX_XRAM_CTRL(obj); diff --git a/hw/misc/xlnx-zynqmp-apu-ctrl.c b/hw/misc/xlnx-zynqmp-apu-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-zynqmp-apu-ctrl.c +++ b/hw/misc/xlnx-zynqmp-apu-ctrl.c @@ -XXX,XX +XXX,XX @@ static void zynqmp_apu_reset_enter(Object *obj, ResetType type) s->cpu_in_wfi = 0; } -static void zynqmp_apu_reset_hold(Object *obj) +static void zynqmp_apu_reset_hold(Object *obj, ResetType type) { XlnxZynqMPAPUCtrl *s = XLNX_ZYNQMP_APU_CTRL(obj); diff --git a/hw/misc/xlnx-zynqmp-crf.c b/hw/misc/xlnx-zynqmp-crf.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/xlnx-zynqmp-crf.c +++ b/hw/misc/xlnx-zynqmp-crf.c @@ -XXX,XX +XXX,XX @@ static void crf_reset_enter(Object *obj, ResetType type) } } -static void crf_reset_hold(Object *obj) +static void crf_reset_hold(Object *obj, ResetType type) { XlnxZynqMPCRF *s = XLNX_ZYNQMP_CRF(obj); ir_update_irq(s); diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/zynq_slcr.c +++ b/hw/misc/zynq_slcr.c @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset_init(Object *obj, ResetType type) s->regs[R_DDRIOB + 12] = 0x00000021; } -static void zynq_slcr_reset_hold(Object *obj) +static void zynq_slcr_reset_hold(Object *obj, ResetType type) { ZynqSLCRState *s = ZYNQ_SLCR(obj); @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset_hold(Object *obj) zynq_slcr_propagate_clocks(s); } -static void zynq_slcr_reset_exit(Object *obj) +static void zynq_slcr_reset_exit(Object *obj, ResetType type) { ZynqSLCRState *s = ZYNQ_SLCR(obj); diff --git a/hw/net/can/xlnx-zynqmp-can.c b/hw/net/can/xlnx-zynqmp-can.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/can/xlnx-zynqmp-can.c +++ b/hw/net/can/xlnx-zynqmp-can.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_can_reset_init(Object *obj, ResetType type) ptimer_transaction_commit(s->can_timer); } -static void xlnx_zynqmp_can_reset_hold(Object *obj) +static void xlnx_zynqmp_can_reset_hold(Object *obj, ResetType type) { XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj); unsigned int i; diff --git a/hw/net/e1000.c b/hw/net/e1000.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000.c +++ b/hw/net/e1000.c @@ -XXX,XX +XXX,XX @@ static bool e1000_vet_init_need(void *opaque) return chkflag(VET); } -static void e1000_reset_hold(Object *obj) +static void e1000_reset_hold(Object *obj, ResetType type) { E1000State *d = E1000(obj); E1000BaseClass *edc = E1000_GET_CLASS(d); diff --git a/hw/net/e1000e.c b/hw/net/e1000e.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e.c +++ b/hw/net/e1000e.c @@ -XXX,XX +XXX,XX @@ static void e1000e_pci_uninit(PCIDevice *pci_dev) msi_uninit(pci_dev); } -static void e1000e_qdev_reset_hold(Object *obj) +static void e1000e_qdev_reset_hold(Object *obj, ResetType type) { E1000EState *s = E1000E(obj); diff --git a/hw/net/igb.c b/hw/net/igb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/igb.c +++ b/hw/net/igb.c @@ -XXX,XX +XXX,XX @@ static void igb_pci_uninit(PCIDevice *pci_dev) msi_uninit(pci_dev); } -static void igb_qdev_reset_hold(Object *obj) +static void igb_qdev_reset_hold(Object *obj, ResetType type) { IGBState *s = IGB(obj); diff --git a/hw/net/igbvf.c b/hw/net/igbvf.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/igbvf.c +++ b/hw/net/igbvf.c @@ -XXX,XX +XXX,XX @@ static void igbvf_pci_realize(PCIDevice *dev, Error **errp) pcie_ari_init(dev, 0x150); } -static void igbvf_qdev_reset_hold(Object *obj) +static void igbvf_qdev_reset_hold(Object *obj, ResetType type) { PCIDevice *vf = PCI_DEVICE(obj); diff --git a/hw/nvram/xlnx-bbram.c b/hw/nvram/xlnx-bbram.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-bbram.c +++ b/hw/nvram/xlnx-bbram.c @@ -XXX,XX +XXX,XX @@ static RegisterAccessInfo bbram_ctrl_regs_info[] = { } }; -static void bbram_ctrl_reset_hold(Object *obj) +static void bbram_ctrl_reset_hold(Object *obj, ResetType type) { XlnxBBRam *s = XLNX_BBRAM(obj); unsigned int i; diff --git a/hw/nvram/xlnx-versal-efuse-ctrl.c b/hw/nvram/xlnx-versal-efuse-ctrl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-versal-efuse-ctrl.c +++ b/hw/nvram/xlnx-versal-efuse-ctrl.c @@ -XXX,XX +XXX,XX @@ static void efuse_ctrl_register_reset(RegisterInfo *reg) register_reset(reg); } -static void efuse_ctrl_reset_hold(Object *obj) +static void efuse_ctrl_reset_hold(Object *obj, ResetType type) { XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(obj); unsigned int i; diff --git a/hw/nvram/xlnx-zynqmp-efuse.c b/hw/nvram/xlnx-zynqmp-efuse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/nvram/xlnx-zynqmp-efuse.c +++ b/hw/nvram/xlnx-zynqmp-efuse.c @@ -XXX,XX +XXX,XX @@ static void zynqmp_efuse_register_reset(RegisterInfo *reg) register_reset(reg); } -static void zynqmp_efuse_reset_hold(Object *obj) +static void zynqmp_efuse_reset_hold(Object *obj, ResetType type) { XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(obj); unsigned int i; diff --git a/hw/pci-bridge/cxl_root_port.c b/hw/pci-bridge/cxl_root_port.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-bridge/cxl_root_port.c +++ b/hw/pci-bridge/cxl_root_port.c @@ -XXX,XX +XXX,XX @@ static void cxl_rp_realize(DeviceState *dev, Error **errp) component_bar); } -static void cxl_rp_reset_hold(Object *obj) +static void cxl_rp_reset_hold(Object *obj, ResetType type) { PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(obj); CXLRootPort *crp = CXL_ROOT_PORT(obj); if (rpc->parent_phases.hold) { - rpc->parent_phases.hold(obj); + rpc->parent_phases.hold(obj, type); } latch_registers(crp); diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-bridge/pcie_root_port.c +++ b/hw/pci-bridge/pcie_root_port.c @@ -XXX,XX +XXX,XX @@ static void rp_write_config(PCIDevice *d, uint32_t address, pcie_aer_root_write_config(d, address, val, len, root_cmd); } -static void rp_reset_hold(Object *obj) +static void rp_reset_hold(Object *obj, ResetType type) { PCIDevice *d = PCI_DEVICE(obj); DeviceState *qdev = DEVICE(obj); diff --git a/hw/pci-host/bonito.c b/hw/pci-host/bonito.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/bonito.c +++ b/hw/pci-host/bonito.c @@ -XXX,XX +XXX,XX @@ static int pci_bonito_map_irq(PCIDevice *pci_dev, int irq_num) } } -static void bonito_reset_hold(Object *obj) +static void bonito_reset_hold(Object *obj, ResetType type) { PCIBonitoState *s = PCI_BONITO(obj); uint32_t val = 0; diff --git a/hw/pci-host/pnv_phb.c b/hw/pci-host/pnv_phb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/pnv_phb.c +++ b/hw/pci-host/pnv_phb.c @@ -XXX,XX +XXX,XX @@ static void pnv_phb_class_init(ObjectClass *klass, void *data) dc->user_creatable = true; } -static void pnv_phb_root_port_reset_hold(Object *obj) +static void pnv_phb_root_port_reset_hold(Object *obj, ResetType type) { PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(obj); PnvPHBRootPort *phb_rp = PNV_PHB_ROOT_PORT(obj); @@ -XXX,XX +XXX,XX @@ static void pnv_phb_root_port_reset_hold(Object *obj) uint8_t *conf = d->config; if (rpc->parent_phases.hold) { - rpc->parent_phases.hold(obj); + rpc->parent_phases.hold(obj, type); } if (phb_rp->version == 3) { diff --git a/hw/pci-host/pnv_phb3_msi.c b/hw/pci-host/pnv_phb3_msi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/pnv_phb3_msi.c +++ b/hw/pci-host/pnv_phb3_msi.c @@ -XXX,XX +XXX,XX @@ static void phb3_msi_resend(ICSState *ics) } } -static void phb3_msi_reset_hold(Object *obj) +static void phb3_msi_reset_hold(Object *obj, ResetType type) { Phb3MsiState *msi = PHB3_MSI(obj); ICSStateClass *icsc = ICS_GET_CLASS(obj); if (icsc->parent_phases.hold) { - icsc->parent_phases.hold(obj); + icsc->parent_phases.hold(obj, type); } memset(msi->rba, 0, sizeof(msi->rba)); diff --git a/hw/pci/pci.c b/hw/pci/pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci/pci.c +++ b/hw/pci/pci.c @@ -XXX,XX +XXX,XX @@ bool pci_available = true; static char *pcibus_get_dev_path(DeviceState *dev); static char *pcibus_get_fw_dev_path(DeviceState *dev); -static void pcibus_reset_hold(Object *obj); +static void pcibus_reset_hold(Object *obj, ResetType type); static bool pcie_has_upstream_port(PCIDevice *dev); static Property pci_props[] = { @@ -XXX,XX +XXX,XX @@ void pci_device_reset(PCIDevice *dev) * Called via bus_cold_reset on RST# assert, after the devices * have been reset device_cold_reset-ed already. */ -static void pcibus_reset_hold(Object *obj) +static void pcibus_reset_hold(Object *obj, ResetType type) { PCIBus *bus = PCI_BUS(obj); int i; diff --git a/hw/rtc/mc146818rtc.c b/hw/rtc/mc146818rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/mc146818rtc.c +++ b/hw/rtc/mc146818rtc.c @@ -XXX,XX +XXX,XX @@ static void rtc_reset_enter(Object *obj, ResetType type) } } -static void rtc_reset_hold(Object *obj) +static void rtc_reset_hold(Object *obj, ResetType type) { MC146818RtcState *s = MC146818_RTC(obj); diff --git a/hw/s390x/css-bridge.c b/hw/s390x/css-bridge.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/css-bridge.c +++ b/hw/s390x/css-bridge.c @@ -XXX,XX +XXX,XX @@ static void ccw_device_unplug(HotplugHandler *hotplug_dev, qdev_unrealize(dev); } -static void virtual_css_bus_reset_hold(Object *obj) +static void virtual_css_bus_reset_hold(Object *obj, ResetType type) { /* This should actually be modelled via the generic css */ css_reset(); diff --git a/hw/sensor/adm1266.c b/hw/sensor/adm1266.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1266.c +++ b/hw/sensor/adm1266.c @@ -XXX,XX +XXX,XX @@ static const uint8_t adm1266_ic_device_id[] = {0x03, 0x41, 0x12, 0x66}; static const uint8_t adm1266_ic_device_rev[] = {0x08, 0x01, 0x08, 0x07, 0x0, 0x0, 0x07, 0x41, 0x30}; -static void adm1266_exit_reset(Object *obj) +static void adm1266_exit_reset(Object *obj, ResetType type) { ADM1266State *s = ADM1266(obj); PMBusDevice *pmdev = PMBUS_DEVICE(obj); diff --git a/hw/sensor/adm1272.c b/hw/sensor/adm1272.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/adm1272.c +++ b/hw/sensor/adm1272.c @@ -XXX,XX +XXX,XX @@ static uint32_t adm1272_direct_to_watts(uint16_t value) return pmbus_direct_mode2data(c, value); } -static void adm1272_exit_reset(Object *obj) +static void adm1272_exit_reset(Object *obj, ResetType type) { ADM1272State *s = ADM1272(obj); PMBusDevice *pmdev = PMBUS_DEVICE(obj); diff --git a/hw/sensor/isl_pmbus_vr.c b/hw/sensor/isl_pmbus_vr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/isl_pmbus_vr.c +++ b/hw/sensor/isl_pmbus_vr.c @@ -XXX,XX +XXX,XX @@ static void isl_pmbus_vr_set(Object *obj, Visitor *v, const char *name, pmbus_check_limits(pmdev); } -static void isl_pmbus_vr_exit_reset(Object *obj) +static void isl_pmbus_vr_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void isl_pmbus_vr_exit_reset(Object *obj) } /* The raa228000 uses different direct mode coefficients from most isl devices */ -static void raa228000_exit_reset(Object *obj) +static void raa228000_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); - isl_pmbus_vr_exit_reset(obj); + isl_pmbus_vr_exit_reset(obj, type); pmdev->pages[0].read_iout = 0; pmdev->pages[0].read_pout = 0; @@ -XXX,XX +XXX,XX @@ static void raa228000_exit_reset(Object *obj) pmdev->pages[0].read_temperature_3 = 0; } -static void isl69259_exit_reset(Object *obj) +static void isl69259_exit_reset(Object *obj, ResetType type) { ISLState *s = ISL69260(obj); static const uint8_t ic_device_id[] = {0x04, 0x00, 0x81, 0xD2, 0x49, 0x3c}; g_assert(sizeof(ic_device_id) <= sizeof(s->ic_device_id)); - isl_pmbus_vr_exit_reset(obj); + isl_pmbus_vr_exit_reset(obj, type); s->ic_device_id_len = sizeof(ic_device_id); memcpy(s->ic_device_id, ic_device_id, sizeof(ic_device_id)); diff --git a/hw/sensor/max31785.c b/hw/sensor/max31785.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/max31785.c +++ b/hw/sensor/max31785.c @@ -XXX,XX +XXX,XX @@ static int max31785_write_data(PMBusDevice *pmdev, const uint8_t *buf, return 0; } -static void max31785_exit_reset(Object *obj) +static void max31785_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); MAX31785State *s = MAX31785(obj); diff --git a/hw/sensor/max34451.c b/hw/sensor/max34451.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sensor/max34451.c +++ b/hw/sensor/max34451.c @@ -XXX,XX +XXX,XX @@ static inline void *memset_word(void *s, uint16_t c, size_t n) return s; } -static void max34451_exit_reset(Object *obj) +static void max34451_exit_reset(Object *obj, ResetType type) { PMBusDevice *pmdev = PMBUS_DEVICE(obj); MAX34451State *s = MAX34451(obj); diff --git a/hw/ssi/npcm7xx_fiu.c b/hw/ssi/npcm7xx_fiu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/npcm7xx_fiu.c +++ b/hw/ssi/npcm7xx_fiu.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_fiu_enter_reset(Object *obj, ResetType type) s->regs[NPCM7XX_FIU_CFG] = 0x0000000b; } -static void npcm7xx_fiu_hold_reset(Object *obj) +static void npcm7xx_fiu_hold_reset(Object *obj, ResetType type) { NPCM7xxFIUState *s = NPCM7XX_FIU(obj); int i; diff --git a/hw/timer/etraxfs_timer.c b/hw/timer/etraxfs_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/etraxfs_timer.c +++ b/hw/timer/etraxfs_timer.c @@ -XXX,XX +XXX,XX @@ static void etraxfs_timer_reset_enter(Object *obj, ResetType type) t->rw_intr_mask = 0; } -static void etraxfs_timer_reset_hold(Object *obj) +static void etraxfs_timer_reset_hold(Object *obj, ResetType type) { ETRAXTimerState *t = ETRAX_TIMER(obj); diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -XXX,XX +XXX,XX @@ static void npcm7xx_watchdog_timer_expired(void *opaque) } } -static void npcm7xx_timer_hold_reset(Object *obj) +static void npcm7xx_timer_hold_reset(Object *obj, ResetType type) { NPCM7xxTimerCtrlState *s = NPCM7XX_TIMER(obj); int i; diff --git a/hw/usb/hcd-dwc2.c b/hw/usb/hcd-dwc2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-dwc2.c +++ b/hw/usb/hcd-dwc2.c @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_enter(Object *obj, ResetType type) } } -static void dwc2_reset_hold(Object *obj) +static void dwc2_reset_hold(Object *obj, ResetType type) { DWC2Class *c = DWC2_USB_GET_CLASS(obj); DWC2State *s = DWC2_USB(obj); @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_hold(Object *obj) trace_usb_dwc2_reset_hold(); if (c->parent_phases.hold) { - c->parent_phases.hold(obj); + c->parent_phases.hold(obj, type); } dwc2_update_irq(s); } -static void dwc2_reset_exit(Object *obj) +static void dwc2_reset_exit(Object *obj, ResetType type) { DWC2Class *c = DWC2_USB_GET_CLASS(obj); DWC2State *s = DWC2_USB(obj); @@ -XXX,XX +XXX,XX @@ static void dwc2_reset_exit(Object *obj) trace_usb_dwc2_reset_exit(); if (c->parent_phases.exit) { - c->parent_phases.exit(obj); + c->parent_phases.exit(obj, type); } s->hprt0 = HPRT0_PWR; diff --git a/hw/usb/xlnx-versal-usb2-ctrl-regs.c b/hw/usb/xlnx-versal-usb2-ctrl-regs.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/xlnx-versal-usb2-ctrl-regs.c +++ b/hw/usb/xlnx-versal-usb2-ctrl-regs.c @@ -XXX,XX +XXX,XX @@ static void usb2_ctrl_regs_reset_init(Object *obj, ResetType type) } } -static void usb2_ctrl_regs_reset_hold(Object *obj) +static void usb2_ctrl_regs_reset_hold(Object *obj, ResetType type) { VersalUsb2CtrlRegs *s = XILINX_VERSAL_USB2_CTRL_REGS(obj); diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-pci.c +++ b/hw/virtio/virtio-pci.c @@ -XXX,XX +XXX,XX @@ static void virtio_pci_reset(DeviceState *qdev) } } -static void virtio_pci_bus_reset_hold(Object *obj) +static void virtio_pci_bus_reset_hold(Object *obj, ResetType type) { PCIDevice *dev = PCI_DEVICE(obj); DeviceState *qdev = DEVICE(obj); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void cp_reg_check_reset(gpointer key, gpointer value, gpointer opaque) assert(oldvalue == newvalue); } -static void arm_cpu_reset_hold(Object *obj) +static void arm_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset_hold(Object *obj) CPUARMState *env = &cpu->env; if (acc->parent_phases.hold) { - acc->parent_phases.hold(obj); + acc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUARMState, end_reset_fields)); diff --git a/target/avr/cpu.c b/target/avr/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/avr/cpu.c +++ b/target/avr/cpu.c @@ -XXX,XX +XXX,XX @@ static void avr_restore_state_to_opc(CPUState *cs, cpu_env(cs)->pc_w = data[0]; } -static void avr_cpu_reset_hold(Object *obj) +static void avr_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); AVRCPU *cpu = AVR_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void avr_cpu_reset_hold(Object *obj) CPUAVRState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } env->pc_w = 0; diff --git a/target/cris/cpu.c b/target/cris/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/cris/cpu.c +++ b/target/cris/cpu.c @@ -XXX,XX +XXX,XX @@ static int cris_cpu_mmu_index(CPUState *cs, bool ifetch) return !!(cpu_env(cs)->pregs[PR_CCS] & U_FLAG); } -static void cris_cpu_reset_hold(Object *obj) +static void cris_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); CRISCPUClass *ccc = CRIS_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void cris_cpu_reset_hold(Object *obj) uint32_t vr; if (ccc->parent_phases.hold) { - ccc->parent_phases.hold(obj); + ccc->parent_phases.hold(obj, type); } vr = env->pregs[PR_VR]; diff --git a/target/hexagon/cpu.c b/target/hexagon/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/hexagon/cpu.c +++ b/target/hexagon/cpu.c @@ -XXX,XX +XXX,XX @@ static void hexagon_restore_state_to_opc(CPUState *cs, cpu_env(cs)->gpr[HEX_REG_PC] = data[0]; } -static void hexagon_cpu_reset_hold(Object *obj) +static void hexagon_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); HexagonCPUClass *mcc = HEXAGON_CPU_GET_CLASS(obj); CPUHexagonState *env = cpu_env(cs); if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } set_default_nan_mode(1, &env->fp_status); diff --git a/target/i386/cpu.c b/target/i386/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/i386/cpu.c +++ b/target/i386/cpu.c @@ -XXX,XX +XXX,XX @@ static void x86_cpu_set_sgxlepubkeyhash(CPUX86State *env) #endif } -static void x86_cpu_reset_hold(Object *obj) +static void x86_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); X86CPU *cpu = X86_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void x86_cpu_reset_hold(Object *obj) int i; if (xcc->parent_phases.hold) { - xcc->parent_phases.hold(obj); + xcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUX86State, end_reset_fields)); diff --git a/target/loongarch/cpu.c b/target/loongarch/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/loongarch/cpu.c +++ b/target/loongarch/cpu.c @@ -XXX,XX +XXX,XX @@ static void loongarch_max_initfn(Object *obj) loongarch_la464_initfn(obj); } -static void loongarch_cpu_reset_hold(Object *obj) +static void loongarch_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); LoongArchCPUClass *lacc = LOONGARCH_CPU_GET_CLASS(obj); CPULoongArchState *env = cpu_env(cs); if (lacc->parent_phases.hold) { - lacc->parent_phases.hold(obj); + lacc->parent_phases.hold(obj, type); } env->fcsr0_mask = FCSR0_M1 | FCSR0_M2 | FCSR0_M3; diff --git a/target/m68k/cpu.c b/target/m68k/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/m68k/cpu.c +++ b/target/m68k/cpu.c @@ -XXX,XX +XXX,XX @@ static void m68k_unset_feature(CPUM68KState *env, int feature) env->features &= ~BIT_ULL(feature); } -static void m68k_cpu_reset_hold(Object *obj) +static void m68k_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); M68kCPUClass *mcc = M68K_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void m68k_cpu_reset_hold(Object *obj) int i; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUM68KState, end_reset_fields)); diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/microblaze/cpu.c +++ b/target/microblaze/cpu.c @@ -XXX,XX +XXX,XX @@ static void microblaze_cpu_set_irq(void *opaque, int irq, int level) } #endif -static void mb_cpu_reset_hold(Object *obj) +static void mb_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void mb_cpu_reset_hold(Object *obj) CPUMBState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUMBState, end_reset_fields)); diff --git a/target/mips/cpu.c b/target/mips/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/mips/cpu.c +++ b/target/mips/cpu.c @@ -XXX,XX +XXX,XX @@ static int mips_cpu_mmu_index(CPUState *cs, bool ifunc) #include "cpu-defs.c.inc" -static void mips_cpu_reset_hold(Object *obj) +static void mips_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); MIPSCPU *cpu = MIPS_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void mips_cpu_reset_hold(Object *obj) CPUMIPSState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUMIPSState, end_reset_fields)); diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/openrisc/cpu.c +++ b/target/openrisc/cpu.c @@ -XXX,XX +XXX,XX @@ static void openrisc_disas_set_info(CPUState *cpu, disassemble_info *info) info->print_insn = print_insn_or1k; } -static void openrisc_cpu_reset_hold(Object *obj) +static void openrisc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); OpenRISCCPU *cpu = OPENRISC_CPU(cs); OpenRISCCPUClass *occ = OPENRISC_CPU_GET_CLASS(obj); if (occ->parent_phases.hold) { - occ->parent_phases.hold(obj); + occ->parent_phases.hold(obj, type); } memset(&cpu->env, 0, offsetof(CPUOpenRISCState, end_reset_fields)); diff --git a/target/ppc/cpu_init.c b/target/ppc/cpu_init.c index XXXXXXX..XXXXXXX 100644 --- a/target/ppc/cpu_init.c +++ b/target/ppc/cpu_init.c @@ -XXX,XX +XXX,XX @@ static int ppc_cpu_mmu_index(CPUState *cs, bool ifetch) return ppc_env_mmu_index(cpu_env(cs), ifetch); } -static void ppc_cpu_reset_hold(Object *obj) +static void ppc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); PowerPCCPU *cpu = POWERPC_CPU(cs); @@ -XXX,XX +XXX,XX @@ static void ppc_cpu_reset_hold(Object *obj) int i; if (pcc->parent_phases.hold) { - pcc->parent_phases.hold(obj); + pcc->parent_phases.hold(obj, type); } msr = (target_ulong)0; diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -XXX,XX +XXX,XX @@ static int riscv_cpu_mmu_index(CPUState *cs, bool ifetch) return riscv_env_mmu_index(cpu_env(cs), ifetch); } -static void riscv_cpu_reset_hold(Object *obj) +static void riscv_cpu_reset_hold(Object *obj, ResetType type) { #ifndef CONFIG_USER_ONLY uint8_t iprio; @@ -XXX,XX +XXX,XX @@ static void riscv_cpu_reset_hold(Object *obj) CPURISCVState *env = &cpu->env; if (mcc->parent_phases.hold) { - mcc->parent_phases.hold(obj); + mcc->parent_phases.hold(obj, type); } #ifndef CONFIG_USER_ONLY env->misa_mxl = mcc->misa_mxl_max; diff --git a/target/rx/cpu.c b/target/rx/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/rx/cpu.c +++ b/target/rx/cpu.c @@ -XXX,XX +XXX,XX @@ static int riscv_cpu_mmu_index(CPUState *cs, bool ifunc) return 0; } -static void rx_cpu_reset_hold(Object *obj) +static void rx_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); RXCPUClass *rcc = RX_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void rx_cpu_reset_hold(Object *obj) uint32_t *resetvec; if (rcc->parent_phases.hold) { - rcc->parent_phases.hold(obj); + rcc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPURXState, end_reset_fields)); diff --git a/target/sh4/cpu.c b/target/sh4/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sh4/cpu.c +++ b/target/sh4/cpu.c @@ -XXX,XX +XXX,XX @@ static int sh4_cpu_mmu_index(CPUState *cs, bool ifetch) } } -static void superh_cpu_reset_hold(Object *obj) +static void superh_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); SuperHCPUClass *scc = SUPERH_CPU_GET_CLASS(obj); CPUSH4State *env = cpu_env(cs); if (scc->parent_phases.hold) { - scc->parent_phases.hold(obj); + scc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUSH4State, end_reset_fields)); diff --git a/target/sparc/cpu.c b/target/sparc/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/sparc/cpu.c +++ b/target/sparc/cpu.c @@ -XXX,XX +XXX,XX @@ //#define DEBUG_FEATURES -static void sparc_cpu_reset_hold(Object *obj) +static void sparc_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); SPARCCPUClass *scc = SPARC_CPU_GET_CLASS(obj); CPUSPARCState *env = cpu_env(cs); if (scc->parent_phases.hold) { - scc->parent_phases.hold(obj); + scc->parent_phases.hold(obj, type); } memset(env, 0, offsetof(CPUSPARCState, end_reset_fields)); diff --git a/target/tricore/cpu.c b/target/tricore/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/tricore/cpu.c +++ b/target/tricore/cpu.c @@ -XXX,XX +XXX,XX @@ static void tricore_restore_state_to_opc(CPUState *cs, cpu_env(cs)->PC = data[0]; } -static void tricore_cpu_reset_hold(Object *obj) +static void tricore_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); TriCoreCPUClass *tcc = TRICORE_CPU_GET_CLASS(obj); if (tcc->parent_phases.hold) { - tcc->parent_phases.hold(obj); + tcc->parent_phases.hold(obj, type); } cpu_state_reset(cpu_env(cs)); diff --git a/target/xtensa/cpu.c b/target/xtensa/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/xtensa/cpu.c +++ b/target/xtensa/cpu.c @@ -XXX,XX +XXX,XX @@ bool xtensa_abi_call0(void) } #endif -static void xtensa_cpu_reset_hold(Object *obj) +static void xtensa_cpu_reset_hold(Object *obj, ResetType type) { CPUState *cs = CPU(obj); XtensaCPUClass *xcc = XTENSA_CPU_GET_CLASS(obj); @@ -XXX,XX +XXX,XX @@ static void xtensa_cpu_reset_hold(Object *obj) XTENSA_OPTION_DFP_COPROCESSOR); if (xcc->parent_phases.hold) { - xcc->parent_phases.hold(obj); + xcc->parent_phases.hold(obj, type); } env->pc = env->config->exception_vector[EXC_RESET0 + env->static_vectors]; -- 2.34.1 Update the reset documentation's example code to match the new API for the hold and exit phase method APIs where they take a ResetType argument. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-6-peter.maydell@linaro.org --- docs/devel/reset.rst | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/reset.rst +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ in reset. mydev->var = 0; } - static void mydev_reset_hold(Object *obj) + static void mydev_reset_hold(Object *obj, ResetType type) { MyDevClass *myclass = MYDEV_GET_CLASS(obj); MyDevState *mydev = MYDEV(obj); /* call parent class hold phase */ if (myclass->parent_phases.hold) { - myclass->parent_phases.hold(obj); + myclass->parent_phases.hold(obj, type); } /* set an IO */ qemu_set_irq(mydev->irq, 1); } - static void mydev_reset_exit(Object *obj) + static void mydev_reset_exit(Object *obj, ResetType type) { MyDevClass *myclass = MYDEV_GET_CLASS(obj); MyDevState *mydev = MYDEV(obj); /* call parent class exit phase */ if (myclass->parent_phases.exit) { - myclass->parent_phases.exit(obj); + myclass->parent_phases.exit(obj, type); } /* clear an IO */ qemu_set_irq(mydev->irq, 0); -- 2.34.1 Some devices and machines need to handle the reset before a vmsave snapshot is loaded differently -- the main user is the handling of RNG seed information, which does not want to put a new RNG seed into a ROM blob when we are doing a snapshot load. Currently this kind of reset handling is supported only for: * TYPE_MACHINE reset methods, which take a ShutdownCause argument * reset functions registered with qemu_register_reset_nosnapshotload To allow a three-phase-reset device to also distinguish "snapshot load" reset from the normal kind, add a new ResetType RESET_TYPE_SNAPSHOT_LOAD. All our existing reset methods ignore the reset type, so we don't need to update any device code. Add the enum type, and make qemu_devices_reset() use the right reset type for the ShutdownCause it is passed. This allows us to get rid of the device_reset_reason global we were using to implement qemu_register_reset_nosnapshotload(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Luc Michel <luc.michel@amd.com> Message-id: 20240412160809.1260625-7-peter.maydell@linaro.org --- docs/devel/reset.rst | 17 ++++++++++++++--- include/hw/resettable.h | 1 + hw/core/reset.c | 15 ++++----------- hw/core/resettable.c | 4 ---- 4 files changed, 19 insertions(+), 18 deletions(-) diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/reset.rst +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ instantly reset an object, without keeping it in reset state, just call ``resettable_reset()``. These functions take two parameters: a pointer to the object to reset and a reset type. -Several types of reset will be supported. For now only cold reset is defined; -others may be added later. The Resettable interface handles reset types with an -enum: +The Resettable interface handles reset types with an enum ``ResetType``: ``RESET_TYPE_COLD`` Cold reset is supported by every resettable object. In QEMU, it means we reset @@ -XXX,XX +XXX,XX @@ enum: from what is a real hardware cold reset. It differs from other resets (like warm or bus resets) which may keep certain parts untouched. +``RESET_TYPE_SNAPSHOT_LOAD`` + This is called for a reset which is being done to put the system into a + clean state prior to loading a snapshot. (This corresponds to a reset + with ``SHUTDOWN_CAUSE_SNAPSHOT_LOAD``.) Almost all devices should treat + this the same as ``RESET_TYPE_COLD``. The main exception is devices which + have some non-deterministic state they want to reinitialize to a different + value on each cold reset, such as RNG seed information, and which they + must not reinitialize on a snapshot-load reset. + +Devices which implement reset methods must treat any unknown ``ResetType`` +as equivalent to ``RESET_TYPE_COLD``; this will reduce the amount of +existing code we need to change if we add more types in future. + Calling ``resettable_reset()`` is equivalent to calling ``resettable_assert_reset()`` then ``resettable_release_reset()``. It is possible to interleave multiple calls to these three functions. There may diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ typedef struct ResettableState ResettableState; */ typedef enum ResetType { RESET_TYPE_COLD, + RESET_TYPE_SNAPSHOT_LOAD, } ResetType; /* diff --git a/hw/core/reset.c b/hw/core/reset.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/reset.c +++ b/hw/core/reset.c @@ -XXX,XX +XXX,XX @@ static ResettableContainer *get_root_reset_container(void) return root_reset_container; } -/* - * Reason why the currently in-progress qemu_devices_reset() was called. - * If we made at least SHUTDOWN_CAUSE_SNAPSHOT_LOAD have a corresponding - * ResetType we could perhaps avoid the need for this global. - */ -static ShutdownCause device_reset_reason; - /* * This is an Object which implements Resettable simply to call the * callback function in the hold phase. @@ -XXX,XX +XXX,XX @@ static void legacy_reset_hold(Object *obj, ResetType type) { LegacyReset *lr = LEGACY_RESET(obj); - if (device_reset_reason == SHUTDOWN_CAUSE_SNAPSHOT_LOAD && - lr->skip_on_snapshot_load) { + if (type == RESET_TYPE_SNAPSHOT_LOAD && lr->skip_on_snapshot_load) { return; } lr->func(lr->opaque); @@ -XXX,XX +XXX,XX @@ void qemu_unregister_resettable(Object *obj) void qemu_devices_reset(ShutdownCause reason) { - device_reset_reason = reason; + ResetType type = (reason == SHUTDOWN_CAUSE_SNAPSHOT_LOAD) ? + RESET_TYPE_SNAPSHOT_LOAD : RESET_TYPE_COLD; /* Reset the simulation */ - resettable_reset(OBJECT(get_root_reset_container()), RESET_TYPE_COLD); + resettable_reset(OBJECT(get_root_reset_container()), type); } diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ void resettable_reset(Object *obj, ResetType type) void resettable_assert_reset(Object *obj, ResetType type) { - /* TODO: change this assert when adding support for other reset types */ - assert(type == RESET_TYPE_COLD); trace_resettable_reset_assert_begin(obj, type); assert(!enter_phase_in_progress); @@ -XXX,XX +XXX,XX @@ void resettable_assert_reset(Object *obj, ResetType type) void resettable_release_reset(Object *obj, ResetType type) { - /* TODO: change this assert when adding support for other reset types */ - assert(type == RESET_TYPE_COLD); trace_resettable_reset_release_begin(obj, type); assert(!enter_phase_in_progress); -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add the basic infrastructure (register read/write, type...) to implement the STM32L4x5 USART. Also create different types for the USART, UART and LPUART of the STM32L4x5 to deduplicate code and enable the implementation of different behaviors depending on the type. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-2-arnaud.minier@telecom-paris.fr [PMM: update to new reset hold method signature; fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 1 + include/hw/char/stm32l4x5_usart.h | 66 +++++ hw/char/stm32l4x5_usart.c | 396 ++++++++++++++++++++++++++++++ hw/char/Kconfig | 3 + hw/char/meson.build | 1 + hw/char/trace-events | 4 + 6 files changed, 471 insertions(+) create mode 100644 include/hw/char/stm32l4x5_usart.h create mode 100644 hw/char/stm32l4x5_usart.c diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Inès Varhol <ines.varhol@telecom-paris.fr> L: qemu-arm@nongnu.org S: Maintained F: hw/arm/stm32l4x5_soc.c +F: hw/char/stm32l4x5_usart.c F: hw/misc/stm32l4x5_exti.c F: hw/misc/stm32l4x5_syscfg.c F: hw/misc/stm32l4x5_rcc.c diff --git a/include/hw/char/stm32l4x5_usart.h b/include/hw/char/stm32l4x5_usart.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/char/stm32l4x5_usart.h @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart + * by Alistair Francis. + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + */ + +#ifndef HW_STM32L4X5_USART_H +#define HW_STM32L4X5_USART_H + +#include "hw/sysbus.h" +#include "chardev/char-fe.h" +#include "qom/object.h" + +#define TYPE_STM32L4X5_USART_BASE "stm32l4x5-usart-base" +#define TYPE_STM32L4X5_USART "stm32l4x5-usart" +#define TYPE_STM32L4X5_UART "stm32l4x5-uart" +#define TYPE_STM32L4X5_LPUART "stm32l4x5-lpuart" +OBJECT_DECLARE_TYPE(Stm32l4x5UsartBaseState, Stm32l4x5UsartBaseClass, + STM32L4X5_USART_BASE) + +typedef enum { + STM32L4x5_USART, + STM32L4x5_UART, + STM32L4x5_LPUART, +} Stm32l4x5UsartType; + +struct Stm32l4x5UsartBaseState { + SysBusDevice parent_obj; + + MemoryRegion mmio; + + uint32_t cr1; + uint32_t cr2; + uint32_t cr3; + uint32_t brr; + uint32_t gtpr; + uint32_t rtor; + /* rqr is write-only */ + uint32_t isr; + /* icr is a clear register */ + uint32_t rdr; + uint32_t tdr; + + Clock *clk; + CharBackend chr; + qemu_irq irq; +}; + +struct Stm32l4x5UsartBaseClass { + SysBusDeviceClass parent_class; + + Stm32l4x5UsartType type; +}; + +#endif /* HW_STM32L4X5_USART_H */ diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ +/* + * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter) + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart + * by Alistair Francis. + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "qapi/error.h" +#include "chardev/char-fe.h" +#include "chardev/char-serial.h" +#include "migration/vmstate.h" +#include "hw/char/stm32l4x5_usart.h" +#include "hw/clock.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-properties-system.h" +#include "hw/registerfields.h" +#include "trace.h" + + +REG32(CR1, 0x00) + FIELD(CR1, M1, 28, 1) /* Word length (part 2, see M0) */ + FIELD(CR1, EOBIE, 27, 1) /* End of Block interrupt enable */ + FIELD(CR1, RTOIE, 26, 1) /* Receiver timeout interrupt enable */ + FIELD(CR1, DEAT, 21, 5) /* Driver Enable assertion time */ + FIELD(CR1, DEDT, 16, 5) /* Driver Enable de-assertion time */ + FIELD(CR1, OVER8, 15, 1) /* Oversampling mode */ + FIELD(CR1, CMIE, 14, 1) /* Character match interrupt enable */ + FIELD(CR1, MME, 13, 1) /* Mute mode enable */ + FIELD(CR1, M0, 12, 1) /* Word length (part 1, see M1) */ + FIELD(CR1, WAKE, 11, 1) /* Receiver wakeup method */ + FIELD(CR1, PCE, 10, 1) /* Parity control enable */ + FIELD(CR1, PS, 9, 1) /* Parity selection */ + FIELD(CR1, PEIE, 8, 1) /* PE interrupt enable */ + FIELD(CR1, TXEIE, 7, 1) /* TXE interrupt enable */ + FIELD(CR1, TCIE, 6, 1) /* Transmission complete interrupt enable */ + FIELD(CR1, RXNEIE, 5, 1) /* RXNE interrupt enable */ + FIELD(CR1, IDLEIE, 4, 1) /* IDLE interrupt enable */ + FIELD(CR1, TE, 3, 1) /* Transmitter enable */ + FIELD(CR1, RE, 2, 1) /* Receiver enable */ + FIELD(CR1, UESM, 1, 1) /* USART enable in Stop mode */ + FIELD(CR1, UE, 0, 1) /* USART enable */ +REG32(CR2, 0x04) + FIELD(CR2, ADD_1, 28, 4) /* ADD[7:4] */ + FIELD(CR2, ADD_0, 24, 1) /* ADD[3:0] */ + FIELD(CR2, RTOEN, 23, 1) /* Receiver timeout enable */ + FIELD(CR2, ABRMOD, 21, 2) /* Auto baud rate mode */ + FIELD(CR2, ABREN, 20, 1) /* Auto baud rate enable */ + FIELD(CR2, MSBFIRST, 19, 1) /* Most significant bit first */ + FIELD(CR2, DATAINV, 18, 1) /* Binary data inversion */ + FIELD(CR2, TXINV, 17, 1) /* TX pin active level inversion */ + FIELD(CR2, RXINV, 16, 1) /* RX pin active level inversion */ + FIELD(CR2, SWAP, 15, 1) /* Swap RX/TX pins */ + FIELD(CR2, LINEN, 14, 1) /* LIN mode enable */ + FIELD(CR2, STOP, 12, 2) /* STOP bits */ + FIELD(CR2, CLKEN, 11, 1) /* Clock enable */ + FIELD(CR2, CPOL, 10, 1) /* Clock polarity */ + FIELD(CR2, CPHA, 9, 1) /* Clock phase */ + FIELD(CR2, LBCL, 8, 1) /* Last bit clock pulse */ + FIELD(CR2, LBDIE, 6, 1) /* LIN break detection interrupt enable */ + FIELD(CR2, LBDL, 5, 1) /* LIN break detection length */ + FIELD(CR2, ADDM7, 4, 1) /* 7-bit / 4-bit Address Detection */ + +REG32(CR3, 0x08) + /* TCBGTIE only on STM32L496xx/4A6xx devices */ + FIELD(CR3, UCESM, 23, 1) /* USART Clock Enable in Stop Mode */ + FIELD(CR3, WUFIE, 22, 1) /* Wakeup from Stop mode interrupt enable */ + FIELD(CR3, WUS, 20, 2) /* Wakeup from Stop mode interrupt flag selection */ + FIELD(CR3, SCARCNT, 17, 3) /* Smartcard auto-retry count */ + FIELD(CR3, DEP, 15, 1) /* Driver enable polarity selection */ + FIELD(CR3, DEM, 14, 1) /* Driver enable mode */ + FIELD(CR3, DDRE, 13, 1) /* DMA Disable on Reception Error */ + FIELD(CR3, OVRDIS, 12, 1) /* Overrun Disable */ + FIELD(CR3, ONEBIT, 11, 1) /* One sample bit method enable */ + FIELD(CR3, CTSIE, 10, 1) /* CTS interrupt enable */ + FIELD(CR3, CTSE, 9, 1) /* CTS enable */ + FIELD(CR3, RTSE, 8, 1) /* RTS enable */ + FIELD(CR3, DMAT, 7, 1) /* DMA enable transmitter */ + FIELD(CR3, DMAR, 6, 1) /* DMA enable receiver */ + FIELD(CR3, SCEN, 5, 1) /* Smartcard mode enable */ + FIELD(CR3, NACK, 4, 1) /* Smartcard NACK enable */ + FIELD(CR3, HDSEL, 3, 1) /* Half-duplex selection */ + FIELD(CR3, IRLP, 2, 1) /* IrDA low-power */ + FIELD(CR3, IREN, 1, 1) /* IrDA mode enable */ + FIELD(CR3, EIE, 0, 1) /* Error interrupt enable */ +REG32(BRR, 0x0C) + FIELD(BRR, BRR, 0, 16) +REG32(GTPR, 0x10) + FIELD(GTPR, GT, 8, 8) /* Guard time value */ + FIELD(GTPR, PSC, 0, 8) /* Prescaler value */ +REG32(RTOR, 0x14) + FIELD(RTOR, BLEN, 24, 8) /* Block Length */ + FIELD(RTOR, RTO, 0, 24) /* Receiver timeout value */ +REG32(RQR, 0x18) + FIELD(RQR, TXFRQ, 4, 1) /* Transmit data flush request */ + FIELD(RQR, RXFRQ, 3, 1) /* Receive data flush request */ + FIELD(RQR, MMRQ, 2, 1) /* Mute mode request */ + FIELD(RQR, SBKRQ, 1, 1) /* Send break request */ + FIELD(RQR, ABBRRQ, 0, 1) /* Auto baud rate request */ +REG32(ISR, 0x1C) + /* TCBGT only for STM32L475xx/476xx/486xx devices */ + FIELD(ISR, REACK, 22, 1) /* Receive enable acknowledge flag */ + FIELD(ISR, TEACK, 21, 1) /* Transmit enable acknowledge flag */ + FIELD(ISR, WUF, 20, 1) /* Wakeup from Stop mode flag */ + FIELD(ISR, RWU, 19, 1) /* Receiver wakeup from Mute mode */ + FIELD(ISR, SBKF, 18, 1) /* Send break flag */ + FIELD(ISR, CMF, 17, 1) /* Character match flag */ + FIELD(ISR, BUSY, 16, 1) /* Busy flag */ + FIELD(ISR, ABRF, 15, 1) /* Auto Baud rate flag */ + FIELD(ISR, ABRE, 14, 1) /* Auto Baud rate error */ + FIELD(ISR, EOBF, 12, 1) /* End of block flag */ + FIELD(ISR, RTOF, 11, 1) /* Receiver timeout */ + FIELD(ISR, CTS, 10, 1) /* CTS flag */ + FIELD(ISR, CTSIF, 9, 1) /* CTS interrupt flag */ + FIELD(ISR, LBDF, 8, 1) /* LIN break detection flag */ + FIELD(ISR, TXE, 7, 1) /* Transmit data register empty */ + FIELD(ISR, TC, 6, 1) /* Transmission complete */ + FIELD(ISR, RXNE, 5, 1) /* Read data register not empty */ + FIELD(ISR, IDLE, 4, 1) /* Idle line detected */ + FIELD(ISR, ORE, 3, 1) /* Overrun error */ + FIELD(ISR, NF, 2, 1) /* START bit Noise detection flag */ + FIELD(ISR, FE, 1, 1) /* Framing Error */ + FIELD(ISR, PE, 0, 1) /* Parity Error */ +REG32(ICR, 0x20) + FIELD(ICR, WUCF, 20, 1) /* Wakeup from Stop mode clear flag */ + FIELD(ICR, CMCF, 17, 1) /* Character match clear flag */ + FIELD(ICR, EOBCF, 12, 1) /* End of block clear flag */ + FIELD(ICR, RTOCF, 11, 1) /* Receiver timeout clear flag */ + FIELD(ICR, CTSCF, 9, 1) /* CTS clear flag */ + FIELD(ICR, LBDCF, 8, 1) /* LIN break detection clear flag */ + /* TCBGTCF only on STM32L496xx/4A6xx devices */ + FIELD(ICR, TCCF, 6, 1) /* Transmission complete clear flag */ + FIELD(ICR, IDLECF, 4, 1) /* Idle line detected clear flag */ + FIELD(ICR, ORECF, 3, 1) /* Overrun error clear flag */ + FIELD(ICR, NCF, 2, 1) /* Noise detected clear flag */ + FIELD(ICR, FECF, 1, 1) /* Framing error clear flag */ + FIELD(ICR, PECF, 0, 1) /* Parity error clear flag */ +REG32(RDR, 0x24) + FIELD(RDR, RDR, 0, 9) +REG32(TDR, 0x28) + FIELD(TDR, TDR, 0, 9) + +static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); + + s->cr1 = 0x00000000; + s->cr2 = 0x00000000; + s->cr3 = 0x00000000; + s->brr = 0x00000000; + s->gtpr = 0x00000000; + s->rtor = 0x00000000; + s->isr = 0x020000C0; + s->rdr = 0x00000000; + s->tdr = 0x00000000; +} + +static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + uint64_t retvalue = 0; + + switch (addr) { + case A_CR1: + retvalue = s->cr1; + break; + case A_CR2: + retvalue = s->cr2; + break; + case A_CR3: + retvalue = s->cr3; + break; + case A_BRR: + retvalue = FIELD_EX32(s->brr, BRR, BRR); + break; + case A_GTPR: + retvalue = s->gtpr; + break; + case A_RTOR: + retvalue = s->rtor; + break; + case A_RQR: + /* RQR is a write only register */ + retvalue = 0x00000000; + break; + case A_ISR: + retvalue = s->isr; + break; + case A_ICR: + /* ICR is a clear register */ + retvalue = 0x00000000; + break; + case A_RDR: + retvalue = FIELD_EX32(s->rdr, RDR, RDR); + /* Reset RXNE flag */ + s->isr &= ~R_ISR_RXNE_MASK; + break; + case A_TDR: + retvalue = FIELD_EX32(s->tdr, TDR, TDR); + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + break; + } + + trace_stm32l4x5_usart_read(addr, retvalue); + + return retvalue; +} + +static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + const uint32_t value = val64; + + trace_stm32l4x5_usart_write(addr, value); + + switch (addr) { + case A_CR1: + s->cr1 = value; + return; + case A_CR2: + s->cr2 = value; + return; + case A_CR3: + s->cr3 = value; + return; + case A_BRR: + s->brr = value; + return; + case A_GTPR: + s->gtpr = value; + return; + case A_RTOR: + s->rtor = value; + return; + case A_RQR: + return; + case A_ISR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: ISR is read only !\n", __func__); + return; + case A_ICR: + /* Clear the status flags */ + s->isr &= ~value; + return; + case A_RDR: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: RDR is read only !\n", __func__); + return; + case A_TDR: + s->tdr = value; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); + } +} + +static const MemoryRegionOps stm32l4x5_usart_base_ops = { + .read = stm32l4x5_usart_base_read, + .write = stm32l4x5_usart_base_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .max_access_size = 4, + .min_access_size = 4, + .unaligned = false + }, + .impl = { + .max_access_size = 4, + .min_access_size = 4, + .unaligned = false + }, +}; + +static Property stm32l4x5_usart_base_properties[] = { + DEFINE_PROP_CHR("chardev", Stm32l4x5UsartBaseState, chr), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32l4x5_usart_base_init(Object *obj) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); + + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_usart_base_ops, s, + TYPE_STM32L4X5_USART_BASE, 0x400); + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); +} + +static const VMStateDescription vmstate_stm32l4x5_usart_base = { + .name = TYPE_STM32L4X5_USART_BASE, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32(cr1, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(cr2, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(cr3, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(brr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(gtpr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(rtor, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(isr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(rdr, Stm32l4x5UsartBaseState), + VMSTATE_UINT32(tdr, Stm32l4x5UsartBaseState), + VMSTATE_CLOCK(clk, Stm32l4x5UsartBaseState), + VMSTATE_END_OF_LIST() + } +}; + + +static void stm32l4x5_usart_base_realize(DeviceState *dev, Error **errp) +{ + ERRP_GUARD(); + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(dev); + if (!clock_has_source(s->clk)) { + error_setg(errp, "USART clock must be wired up by SoC code"); + return; + } +} + +static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = stm32l4x5_usart_base_reset_hold; + device_class_set_props(dc, stm32l4x5_usart_base_properties); + dc->realize = stm32l4x5_usart_base_realize; + dc->vmsd = &vmstate_stm32l4x5_usart_base; +} + +static void stm32l4x5_usart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_USART; +} + +static void stm32l4x5_uart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_UART; +} + +static void stm32l4x5_lpuart_class_init(ObjectClass *oc, void *data) +{ + Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); + + subc->type = STM32L4x5_LPUART; +} + +static const TypeInfo stm32l4x5_usart_types[] = { + { + .name = TYPE_STM32L4X5_USART_BASE, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Stm32l4x5UsartBaseState), + .instance_init = stm32l4x5_usart_base_init, + .class_init = stm32l4x5_usart_base_class_init, + .abstract = true, + }, { + .name = TYPE_STM32L4X5_USART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_usart_class_init, + }, { + .name = TYPE_STM32L4X5_UART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_uart_class_init, + }, { + .name = TYPE_STM32L4X5_LPUART, + .parent = TYPE_STM32L4X5_USART_BASE, + .class_init = stm32l4x5_lpuart_class_init, + } +}; + +DEFINE_TYPES(stm32l4x5_usart_types) diff --git a/hw/char/Kconfig b/hw/char/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/char/Kconfig +++ b/hw/char/Kconfig @@ -XXX,XX +XXX,XX @@ config VIRTIO_SERIAL config STM32F2XX_USART bool +config STM32L4X5_USART + bool + config CMSDK_APB_UART bool diff --git a/hw/char/meson.build b/hw/char/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/char/meson.build +++ b/hw/char/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_RENESAS_SCI', if_true: files('renesas_sci.c')) system_ss.add(when: 'CONFIG_SIFIVE_UART', if_true: files('sifive_uart.c')) system_ss.add(when: 'CONFIG_SH_SCI', if_true: files('sh_serial.c')) system_ss.add(when: 'CONFIG_STM32F2XX_USART', if_true: files('stm32f2xx_usart.c')) +system_ss.add(when: 'CONFIG_STM32L4X5_USART', if_true: files('stm32l4x5_usart.c')) system_ss.add(when: 'CONFIG_MCHP_PFSOC_MMUART', if_true: files('mchp_pfsoc_mmuart.c')) system_ss.add(when: 'CONFIG_HTIF', if_true: files('riscv_htif.c')) system_ss.add(when: 'CONFIG_GOLDFISH_TTY', if_true: files('goldfish_tty.c')) diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ cadence_uart_baudrate(unsigned baudrate) "baudrate %u" sh_serial_read(char *id, unsigned size, uint64_t offs, uint64_t val) " %s size %d offs 0x%02" PRIx64 " -> 0x%02" PRIx64 sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size %d offs 0x%02" PRIx64 " <- 0x%02" PRIx64 +# stm32l4x5_usart.c +stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 "> -> 0x%" PRIx32 "" +stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 "> <- 0x%" PRIx32 "" + # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" xen_console_disconnect(unsigned int idx) "idx %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Implement the ability to read and write characters to the usart using the serial port. The character transmission is based on the cmsdk-apb-uart implementation. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-3-arnaud.minier@telecom-paris.fr [PMM: fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/char/stm32l4x5_usart.h | 1 + hw/char/stm32l4x5_usart.c | 143 ++++++++++++++++++++++++++++++ hw/char/trace-events | 7 ++ 3 files changed, 151 insertions(+) diff --git a/include/hw/char/stm32l4x5_usart.h b/include/hw/char/stm32l4x5_usart.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/char/stm32l4x5_usart.h +++ b/include/hw/char/stm32l4x5_usart.h @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5UsartBaseState { Clock *clk; CharBackend chr; qemu_irq irq; + guint watch_tag; }; struct Stm32l4x5UsartBaseClass { diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32l4x5_usart.c +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ REG32(RDR, 0x24) REG32(TDR, 0x28) FIELD(TDR, TDR, 0, 9) +static void stm32l4x5_update_irq(Stm32l4x5UsartBaseState *s) +{ + if (((s->isr & R_ISR_WUF_MASK) && (s->cr3 & R_CR3_WUFIE_MASK)) || + ((s->isr & R_ISR_CMF_MASK) && (s->cr1 & R_CR1_CMIE_MASK)) || + ((s->isr & R_ISR_ABRF_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK)) || + ((s->isr & R_ISR_EOBF_MASK) && (s->cr1 & R_CR1_EOBIE_MASK)) || + ((s->isr & R_ISR_RTOF_MASK) && (s->cr1 & R_CR1_RTOIE_MASK)) || + ((s->isr & R_ISR_CTSIF_MASK) && (s->cr3 & R_CR3_CTSIE_MASK)) || + ((s->isr & R_ISR_LBDF_MASK) && (s->cr2 & R_CR2_LBDIE_MASK)) || + ((s->isr & R_ISR_TXE_MASK) && (s->cr1 & R_CR1_TXEIE_MASK)) || + ((s->isr & R_ISR_TC_MASK) && (s->cr1 & R_CR1_TCIE_MASK)) || + ((s->isr & R_ISR_RXNE_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK)) || + ((s->isr & R_ISR_IDLE_MASK) && (s->cr1 & R_CR1_IDLEIE_MASK)) || + ((s->isr & R_ISR_ORE_MASK) && + ((s->cr1 & R_CR1_RXNEIE_MASK) || (s->cr3 & R_CR3_EIE_MASK))) || + /* TODO: Handle NF ? */ + ((s->isr & R_ISR_FE_MASK) && (s->cr3 & R_CR3_EIE_MASK)) || + ((s->isr & R_ISR_PE_MASK) && (s->cr1 & R_CR1_PEIE_MASK))) { + qemu_irq_raise(s->irq); + trace_stm32l4x5_usart_irq_raised(s->isr); + } else { + qemu_irq_lower(s->irq); + trace_stm32l4x5_usart_irq_lowered(); + } +} + +static int stm32l4x5_usart_base_can_receive(void *opaque) +{ + Stm32l4x5UsartBaseState *s = opaque; + + if (!(s->isr & R_ISR_RXNE_MASK)) { + return 1; + } + + return 0; +} + +static void stm32l4x5_usart_base_receive(void *opaque, const uint8_t *buf, + int size) +{ + Stm32l4x5UsartBaseState *s = opaque; + + if (!((s->cr1 & R_CR1_UE_MASK) && (s->cr1 & R_CR1_RE_MASK))) { + trace_stm32l4x5_usart_receiver_not_enabled( + FIELD_EX32(s->cr1, CR1, UE), FIELD_EX32(s->cr1, CR1, RE)); + return; + } + + /* Check if overrun detection is enabled and if there is an overrun */ + if (!(s->cr3 & R_CR3_OVRDIS_MASK) && (s->isr & R_ISR_RXNE_MASK)) { + /* + * A character has been received while + * the previous has not been read = Overrun. + */ + s->isr |= R_ISR_ORE_MASK; + trace_stm32l4x5_usart_overrun_detected(s->rdr, *buf); + } else { + /* No overrun */ + s->rdr = *buf; + s->isr |= R_ISR_RXNE_MASK; + trace_stm32l4x5_usart_rx(s->rdr); + } + + stm32l4x5_update_irq(s); +} + +/* + * Try to send tx data, and arrange to be called back later if + * we can't (ie the char backend is busy/blocking). + */ +static gboolean usart_transmit(void *do_not_use, GIOCondition cond, + void *opaque) +{ + Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(opaque); + int ret; + /* TODO: Handle 9 bits transmission */ + uint8_t ch = s->tdr; + + s->watch_tag = 0; + + if (!(s->cr1 & R_CR1_TE_MASK) || (s->isr & R_ISR_TXE_MASK)) { + return G_SOURCE_REMOVE; + } + + ret = qemu_chr_fe_write(&s->chr, &ch, 1); + if (ret <= 0) { + s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP, + usart_transmit, s); + if (!s->watch_tag) { + /* + * Most common reason to be here is "no chardev backend": + * just insta-drain the buffer, so the serial output + * goes into a void, rather than blocking the guest. + */ + goto buffer_drained; + } + /* Transmit pending */ + trace_stm32l4x5_usart_tx_pending(); + return G_SOURCE_REMOVE; + } + +buffer_drained: + /* Character successfully sent */ + trace_stm32l4x5_usart_tx(ch); + s->isr |= R_ISR_TC_MASK | R_ISR_TXE_MASK; + stm32l4x5_update_irq(s); + return G_SOURCE_REMOVE; +} + +static void usart_cancel_transmit(Stm32l4x5UsartBaseState *s) +{ + if (s->watch_tag) { + g_source_remove(s->watch_tag); + s->watch_tag = 0; + } +} + static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) { Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) s->isr = 0x020000C0; s->rdr = 0x00000000; s->tdr = 0x00000000; + + usart_cancel_transmit(s); + stm32l4x5_update_irq(s); +} + +static void usart_update_rqr(Stm32l4x5UsartBaseState *s, uint32_t value) +{ + /* TXFRQ */ + /* Reset RXNE flag */ + if (value & R_RQR_RXFRQ_MASK) { + s->isr &= ~R_ISR_RXNE_MASK; + } + /* MMRQ */ + /* SBKRQ */ + /* ABRRQ */ + stm32l4x5_update_irq(s); } static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, @@ -XXX,XX +XXX,XX @@ static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, retvalue = FIELD_EX32(s->rdr, RDR, RDR); /* Reset RXNE flag */ s->isr &= ~R_ISR_RXNE_MASK; + stm32l4x5_update_irq(s); break; case A_TDR: retvalue = FIELD_EX32(s->tdr, TDR, TDR); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, switch (addr) { case A_CR1: s->cr1 = value; + stm32l4x5_update_irq(s); return; case A_CR2: s->cr2 = value; @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, s->rtor = value; return; case A_RQR: + usart_update_rqr(s, value); return; case A_ISR: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, case A_ICR: /* Clear the status flags */ s->isr &= ~value; + stm32l4x5_update_irq(s); return; case A_RDR: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, return; case A_TDR: s->tdr = value; + s->isr &= ~R_ISR_TXE_MASK; + usart_transmit(NULL, G_IO_OUT, s); return; default: qemu_log_mask(LOG_GUEST_ERROR, @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_realize(DeviceState *dev, Error **errp) error_setg(errp, "USART clock must be wired up by SoC code"); return; } + + qemu_chr_fe_set_handlers(&s->chr, stm32l4x5_usart_base_can_receive, + stm32l4x5_usart_base_receive, NULL, NULL, + s, NULL, true); } static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data) diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ sh_serial_write(char *id, unsigned size, uint64_t offs, uint64_t val) "%s size % # stm32l4x5_usart.c stm32l4x5_usart_read(uint64_t addr, uint32_t data) "USART: Read <0x%" PRIx64 "> -> 0x%" PRIx32 "" stm32l4x5_usart_write(uint64_t addr, uint32_t data) "USART: Write <0x%" PRIx64 "> <- 0x%" PRIx32 "" +stm32l4x5_usart_rx(uint8_t c) "USART: got character 0x%x from backend" +stm32l4x5_usart_tx(uint8_t c) "USART: character 0x%x sent to backend" +stm32l4x5_usart_tx_pending(void) "USART: character send to backend pending" +stm32l4x5_usart_irq_raised(uint32_t reg) "USART: IRQ raised: 0x%08"PRIx32 +stm32l4x5_usart_irq_lowered(void) "USART: IRQ lowered" +stm32l4x5_usart_overrun_detected(uint8_t current, uint8_t received) "USART: Overrun detected, RDR='0x%x', received 0x%x" +stm32l4x5_usart_receiver_not_enabled(uint8_t ue_bit, uint8_t re_bit) "USART: Receiver not enabled, UE=0x%x, RE=0x%x" # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add a function to change the settings of the serial connection. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-4-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/stm32l4x5_usart.c | 98 +++++++++++++++++++++++++++++++++++++++ hw/char/trace-events | 1 + 2 files changed, 99 insertions(+) diff --git a/hw/char/stm32l4x5_usart.c b/hw/char/stm32l4x5_usart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/stm32l4x5_usart.c +++ b/hw/char/stm32l4x5_usart.c @@ -XXX,XX +XXX,XX @@ static void usart_cancel_transmit(Stm32l4x5UsartBaseState *s) } } +static void stm32l4x5_update_params(Stm32l4x5UsartBaseState *s) +{ + int speed, parity, data_bits, stop_bits; + uint32_t value, usart_div; + QEMUSerialSetParams ssp; + + /* Select the parity type */ + if (s->cr1 & R_CR1_PCE_MASK) { + if (s->cr1 & R_CR1_PS_MASK) { + parity = 'O'; + } else { + parity = 'E'; + } + } else { + parity = 'N'; + } + + /* Select the number of stop bits */ + switch (FIELD_EX32(s->cr2, CR2, STOP)) { + case 0: + stop_bits = 1; + break; + case 2: + stop_bits = 2; + break; + default: + qemu_log_mask(LOG_UNIMP, + "UNIMPLEMENTED: fractionnal stop bits; CR2[13:12] = %u", + FIELD_EX32(s->cr2, CR2, STOP)); + return; + } + + /* Select the length of the word */ + switch ((FIELD_EX32(s->cr1, CR1, M1) << 1) | FIELD_EX32(s->cr1, CR1, M0)) { + case 0: + data_bits = 8; + break; + case 1: + data_bits = 9; + break; + case 2: + data_bits = 7; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "UNDEFINED: invalid word length, CR1.M = 0b11"); + return; + } + + /* Select the baud rate */ + value = FIELD_EX32(s->brr, BRR, BRR); + if (value < 16) { + qemu_log_mask(LOG_GUEST_ERROR, + "UNDEFINED: BRR less than 16: %u", value); + return; + } + + if (FIELD_EX32(s->cr1, CR1, OVER8) == 0) { + /* + * Oversampling by 16 + * BRR = USARTDIV + */ + usart_div = value; + } else { + /* + * Oversampling by 8 + * - BRR[2:0] = USARTDIV[3:0] shifted 1 bit to the right. + * - BRR[3] must be kept cleared. + * - BRR[15:4] = USARTDIV[15:4] + * - The frequency is multiplied by 2 + */ + usart_div = ((value & 0xFFF0) | ((value & 0x0007) << 1)) / 2; + } + + speed = clock_get_hz(s->clk) / usart_div; + + ssp.speed = speed; + ssp.parity = parity; + ssp.data_bits = data_bits; + ssp.stop_bits = stop_bits; + + qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); + + trace_stm32l4x5_usart_update_params(speed, parity, data_bits, stop_bits); +} + static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) { Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, switch (addr) { case A_CR1: s->cr1 = value; + stm32l4x5_update_params(s); stm32l4x5_update_irq(s); return; case A_CR2: s->cr2 = value; + stm32l4x5_update_params(s); return; case A_CR3: s->cr3 = value; return; case A_BRR: s->brr = value; + stm32l4x5_update_params(s); return; case A_GTPR: s->gtpr = value; @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_usart_base_init(Object *obj) s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); } +static int stm32l4x5_usart_base_post_load(void *opaque, int version_id) +{ + Stm32l4x5UsartBaseState *s = (Stm32l4x5UsartBaseState *)opaque; + + stm32l4x5_update_params(s); + return 0; +} + static const VMStateDescription vmstate_stm32l4x5_usart_base = { .name = TYPE_STM32L4X5_USART_BASE, .version_id = 1, .minimum_version_id = 1, + .post_load = stm32l4x5_usart_base_post_load, .fields = (VMStateField[]) { VMSTATE_UINT32(cr1, Stm32l4x5UsartBaseState), VMSTATE_UINT32(cr2, Stm32l4x5UsartBaseState), diff --git a/hw/char/trace-events b/hw/char/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/char/trace-events +++ b/hw/char/trace-events @@ -XXX,XX +XXX,XX @@ stm32l4x5_usart_irq_raised(uint32_t reg) "USART: IRQ raised: 0x%08"PRIx32 stm32l4x5_usart_irq_lowered(void) "USART: IRQ lowered" stm32l4x5_usart_overrun_detected(uint8_t current, uint8_t received) "USART: Overrun detected, RDR='0x%x', received 0x%x" stm32l4x5_usart_receiver_not_enabled(uint8_t ue_bit, uint8_t re_bit) "USART: Receiver not enabled, UE=0x%x, RE=0x%x" +stm32l4x5_usart_update_params(int speed, uint8_t parity, int data, int stop) "USART: speed: %d, parity: %c, data bits: %d, stop bits: %d" # xen_console.c xen_console_connect(unsigned int idx, unsigned int ring_ref, unsigned int port, unsigned int limit) "idx %u ring_ref %u port %u limit %u" -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Add the USART to the SoC and connect it to the other implemented devices. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-5-arnaud.minier@telecom-paris.fr [PMM: fixed a few checkpatch nits] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/b-l475e-iot01a.rst | 2 +- include/hw/arm/stm32l4x5_soc.h | 7 +++ hw/arm/stm32l4x5_soc.c | 83 +++++++++++++++++++++++++++--- hw/arm/Kconfig | 1 + 4 files changed, 86 insertions(+), 7 deletions(-) diff --git a/docs/system/arm/b-l475e-iot01a.rst b/docs/system/arm/b-l475e-iot01a.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/b-l475e-iot01a.rst +++ b/docs/system/arm/b-l475e-iot01a.rst @@ -XXX,XX +XXX,XX @@ Currently B-L475E-IOT01A machine's only supports the following devices: - STM32L4x5 SYSCFG (System configuration controller) - STM32L4x5 RCC (Reset and clock control) - STM32L4x5 GPIOs (General-purpose I/Os) +- STM32L4x5 USARTs, UARTs and LPUART (Serial ports) Missing devices """"""""""""""" The B-L475E-IOT01A does *not* support the following devices: -- Serial ports (UART) - Analog to Digital Converter (ADC) - SPI controller - Timer controller (TIMER) diff --git a/include/hw/arm/stm32l4x5_soc.h b/include/hw/arm/stm32l4x5_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32l4x5_soc.h +++ b/include/hw/arm/stm32l4x5_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/stm32l4x5_exti.h" #include "hw/misc/stm32l4x5_rcc.h" #include "hw/gpio/stm32l4x5_gpio.h" +#include "hw/char/stm32l4x5_usart.h" #include "qom/object.h" #define TYPE_STM32L4X5_SOC "stm32l4x5-soc" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(Stm32l4x5SocState, Stm32l4x5SocClass, STM32L4X5_SOC) #define NUM_EXTI_OR_GATES 4 +#define STM_NUM_USARTS 3 +#define STM_NUM_UARTS 2 + struct Stm32l4x5SocState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct Stm32l4x5SocState { Stm32l4x5SyscfgState syscfg; Stm32l4x5RccState rcc; Stm32l4x5GpioState gpio[NUM_GPIOS]; + Stm32l4x5UsartBaseState usart[STM_NUM_USARTS]; + Stm32l4x5UsartBaseState uart[STM_NUM_UARTS]; + Stm32l4x5UsartBaseState lpuart; MemoryRegion sram1; MemoryRegion sram2; diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32l4x5_soc.c +++ b/hw/arm/stm32l4x5_soc.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/or-irq.h" #include "hw/arm/stm32l4x5_soc.h" +#include "hw/char/stm32l4x5_usart.h" #include "hw/gpio/stm32l4x5_gpio.h" #include "hw/qdev-clock.h" #include "hw/misc/unimp.h" @@ -XXX,XX +XXX,XX @@ static const struct { { 0x48001C00, 0x0000000F, 0x00000000, 0x00000000 }, }; +static const hwaddr usart_addr[] = { + 0x40013800, /* "USART1", 0x400 */ + 0x40004400, /* "USART2", 0x400 */ + 0x40004800, /* "USART3", 0x400 */ +}; +static const hwaddr uart_addr[] = { + 0x40004C00, /* "UART4" , 0x400 */ + 0x40005000 /* "UART5" , 0x400 */ +}; + +#define LPUART_BASE_ADDRESS 0x40008000 + +static const int usart_irq[] = { 37, 38, 39 }; +static const int uart_irq[] = { 52, 53 }; +#define LPUART_IRQ 70 + static void stm32l4x5_soc_initfn(Object *obj) { Stm32l4x5SocState *s = STM32L4X5_SOC(obj); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_initfn(Object *obj) g_autofree char *name = g_strdup_printf("gpio%c", 'a' + i); object_initialize_child(obj, name, &s->gpio[i], TYPE_STM32L4X5_GPIO); } + + for (int i = 0; i < STM_NUM_USARTS; i++) { + object_initialize_child(obj, "usart[*]", &s->usart[i], + TYPE_STM32L4X5_USART); + } + + for (int i = 0; i < STM_NUM_UARTS; i++) { + object_initialize_child(obj, "uart[*]", &s->uart[i], + TYPE_STM32L4X5_UART); + } + object_initialize_child(obj, "lpuart1", &s->lpuart, + TYPE_STM32L4X5_LPUART); } static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) sysbus_mmio_map(busdev, 0, RCC_BASE_ADDRESS); sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, RCC_IRQ)); + /* USART devices */ + for (int i = 0; i < STM_NUM_USARTS; i++) { + g_autofree char *name = g_strdup_printf("usart%d-out", i + 1); + dev = DEVICE(&(s->usart[i])); + qdev_prop_set_chr(dev, "chardev", serial_hd(i)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), name)); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, usart_addr[i]); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i])); + } + + /* + * TODO: Connect the USARTs, UARTs and LPUART to the EXTI once the EXTI + * can handle other gpio-in than the gpios. (e.g. Direct Lines for the + * usarts) + */ + + /* UART devices */ + for (int i = 0; i < STM_NUM_UARTS; i++) { + g_autofree char *name = g_strdup_printf("uart%d-out", STM_NUM_USARTS + i + 1); + dev = DEVICE(&(s->uart[i])); + qdev_prop_set_chr(dev, "chardev", serial_hd(STM_NUM_USARTS + i)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), name)); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, uart_addr[i]); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, uart_irq[i])); + } + + /* LPUART device*/ + dev = DEVICE(&(s->lpuart)); + qdev_prop_set_chr(dev, "chardev", serial_hd(STM_NUM_USARTS + STM_NUM_UARTS)); + qdev_connect_clock_in(dev, "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), "lpuart1-out")); + busdev = SYS_BUS_DEVICE(dev); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, LPUART_BASE_ADDRESS); + sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, LPUART_IRQ)); + /* APB1 BUS */ create_unimplemented_device("TIM2", 0x40000000, 0x400); create_unimplemented_device("TIM3", 0x40000400, 0x400); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("SPI2", 0x40003800, 0x400); create_unimplemented_device("SPI3", 0x40003C00, 0x400); /* RESERVED: 0x40004000, 0x400 */ - create_unimplemented_device("USART2", 0x40004400, 0x400); - create_unimplemented_device("USART3", 0x40004800, 0x400); - create_unimplemented_device("UART4", 0x40004C00, 0x400); - create_unimplemented_device("UART5", 0x40005000, 0x400); create_unimplemented_device("I2C1", 0x40005400, 0x400); create_unimplemented_device("I2C2", 0x40005800, 0x400); create_unimplemented_device("I2C3", 0x40005C00, 0x400); @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("DAC1", 0x40007400, 0x400); create_unimplemented_device("OPAMP", 0x40007800, 0x400); create_unimplemented_device("LPTIM1", 0x40007C00, 0x400); - create_unimplemented_device("LPUART1", 0x40008000, 0x400); /* RESERVED: 0x40008400, 0x400 */ create_unimplemented_device("SWPMI1", 0x40008800, 0x400); /* RESERVED: 0x40008C00, 0x800 */ @@ -XXX,XX +XXX,XX @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) create_unimplemented_device("TIM1", 0x40012C00, 0x400); create_unimplemented_device("SPI1", 0x40013000, 0x400); create_unimplemented_device("TIM8", 0x40013400, 0x400); - create_unimplemented_device("USART1", 0x40013800, 0x400); /* RESERVED: 0x40013C00, 0x400 */ create_unimplemented_device("TIM15", 0x40014000, 0x400); create_unimplemented_device("TIM16", 0x40014400, 0x400); diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config STM32L4X5_SOC select STM32L4X5_SYSCFG select STM32L4X5_RCC select STM32L4X5_GPIO + select STM32L4X5_USART config XLNX_ZYNQMP_ARM bool -- 2.34.1 From: Arnaud Minier <arnaud.minier@telecom-paris.fr> Test: - read/write from/to the usart registers - send/receive a character/string over the serial port Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240329174402.60382-6-arnaud.minier@telecom-paris.fr [PMM: fix checkpatch nits, remove commented out code] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/stm32l4x5_usart-test.c | 315 +++++++++++++++++++++++++++++ tests/qtest/meson.build | 4 +- 2 files changed, 318 insertions(+), 1 deletion(-) create mode 100644 tests/qtest/stm32l4x5_usart-test.c diff --git a/tests/qtest/stm32l4x5_usart-test.c b/tests/qtest/stm32l4x5_usart-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/stm32l4x5_usart-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for STML4X5_USART + * + * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "libqtest.h" +#include "hw/misc/stm32l4x5_rcc_internals.h" +#include "hw/registerfields.h" + +#define RCC_BASE_ADDR 0x40021000 +/* Use USART 1 ADDR, assume the others work the same */ +#define USART1_BASE_ADDR 0x40013800 + +/* See stm32l4x5_usart for definitions */ +REG32(CR1, 0x00) + FIELD(CR1, M1, 28, 1) + FIELD(CR1, OVER8, 15, 1) + FIELD(CR1, M0, 12, 1) + FIELD(CR1, PCE, 10, 1) + FIELD(CR1, TXEIE, 7, 1) + FIELD(CR1, RXNEIE, 5, 1) + FIELD(CR1, TE, 3, 1) + FIELD(CR1, RE, 2, 1) + FIELD(CR1, UE, 0, 1) +REG32(CR2, 0x04) +REG32(CR3, 0x08) + FIELD(CR3, OVRDIS, 12, 1) +REG32(BRR, 0x0C) +REG32(GTPR, 0x10) +REG32(RTOR, 0x14) +REG32(RQR, 0x18) +REG32(ISR, 0x1C) + FIELD(ISR, TXE, 7, 1) + FIELD(ISR, RXNE, 5, 1) + FIELD(ISR, ORE, 3, 1) +REG32(ICR, 0x20) +REG32(RDR, 0x24) +REG32(TDR, 0x28) + +#define NVIC_ISPR1 0XE000E204 +#define NVIC_ICPR1 0xE000E284 +#define USART1_IRQ 37 + +static bool check_nvic_pending(QTestState *qts, unsigned int n) +{ + /* No USART interrupts are less than 32 */ + assert(n > 32); + n -= 32; + return qtest_readl(qts, NVIC_ISPR1) & (1 << n); +} + +static bool clear_nvic_pending(QTestState *qts, unsigned int n) +{ + /* No USART interrupts are less than 32 */ + assert(n > 32); + n -= 32; + qtest_writel(qts, NVIC_ICPR1, (1 << n)); + return true; +} + +/* + * Wait indefinitely for the flag to be updated. + * If this is run on a slow CI runner, + * the meson harness will timeout after 10 minutes for us. + */ +static bool usart_wait_for_flag(QTestState *qts, uint32_t event_addr, + uint32_t flag) +{ + while (true) { + if ((qtest_readl(qts, event_addr) & flag)) { + return true; + } + g_usleep(1000); + } + + return false; +} + +static void usart_receive_string(QTestState *qts, int sock_fd, const char *in, + char *out) +{ + int i, in_len = strlen(in); + + g_assert_true(send(sock_fd, in, in_len, 0) == in_len); + for (i = 0; i < in_len; i++) { + g_assert_true(usart_wait_for_flag(qts, + USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK)); + out[i] = qtest_readl(qts, USART1_BASE_ADDR + A_RDR); + } + out[i] = '\0'; +} + +static void usart_send_string(QTestState *qts, const char *in) +{ + int i, in_len = strlen(in); + + for (i = 0; i < in_len; i++) { + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, in[i]); + g_assert_true(usart_wait_for_flag(qts, + USART1_BASE_ADDR + A_ISR, R_ISR_TXE_MASK)); + } +} + +/* Init the RCC clocks to run at 80 MHz */ +static void init_clocks(QTestState *qts) +{ + uint32_t value; + + /* MSIRANGE can be set only when MSI is OFF or READY */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CR), R_CR_MSION_MASK); + + /* Clocking from MSI, in case MSI was not the default source */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), 0); + + /* + * Update PLL and set MSI as the source clock. + * PLLM = 1 --> 000 + * PLLN = 40 --> 40 + * PPLLR = 2 --> 00 + * PLLDIV = unused, PLLP = unused (SAI3), PLLQ = unused (48M1) + * SRC = MSI --> 01 + */ + qtest_writel(qts, (RCC_BASE_ADDR + A_PLLCFGR), R_PLLCFGR_PLLREN_MASK | + (40 << R_PLLCFGR_PLLN_SHIFT) | + (0b01 << R_PLLCFGR_PLLSRC_SHIFT)); + + /* PLL activation */ + + value = qtest_readl(qts, (RCC_BASE_ADDR + A_CR)); + qtest_writel(qts, (RCC_BASE_ADDR + A_CR), value | R_CR_PLLON_MASK); + + /* RCC_CFGR is OK by defaut */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), 0); + + /* CCIPR : no periph clock by default */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CCIPR), 0); + + /* Switches on the PLL clock source */ + value = qtest_readl(qts, (RCC_BASE_ADDR + A_CFGR)); + qtest_writel(qts, (RCC_BASE_ADDR + A_CFGR), (value & ~R_CFGR_SW_MASK) | + (0b11 << R_CFGR_SW_SHIFT)); + + /* Enable SYSCFG clock enabled */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2ENR), R_APB2ENR_SYSCFGEN_MASK); + + /* Enable the IO port B clock (See p.252) */ + qtest_writel(qts, (RCC_BASE_ADDR + A_AHB2ENR), R_AHB2ENR_GPIOBEN_MASK); + + /* Enable the clock for USART1 (cf p.259) */ + /* We rewrite SYSCFGEN to not disable it */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2ENR), + R_APB2ENR_SYSCFGEN_MASK | R_APB2ENR_USART1EN_MASK); + + /* TODO: Enable usart via gpio */ + + /* Set PCLK as the clock for USART1(cf p.272) i.e. reset both bits */ + qtest_writel(qts, (RCC_BASE_ADDR + A_CCIPR), 0); + + /* Reset USART1 (see p.249) */ + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2RSTR), 1 << 14); + qtest_writel(qts, (RCC_BASE_ADDR + A_APB2RSTR), 0); +} + +static void init_uart(QTestState *qts) +{ + uint32_t cr1; + + init_clocks(qts); + + /* + * For 115200 bauds, see p.1349. + * The clock has a frequency of 80Mhz, + * for 115200, we have to put a divider of 695 = 0x2B7. + */ + qtest_writel(qts, (USART1_BASE_ADDR + A_BRR), 0x2B7); + + /* + * Set the oversampling by 16, + * disable the parity control and + * set the word length to 8. (cf p.1377) + */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 &= ~(R_CR1_M1_MASK | R_CR1_M0_MASK | R_CR1_OVER8_MASK | R_CR1_PCE_MASK); + qtest_writel(qts, (USART1_BASE_ADDR + A_CR1), cr1); + + /* Enable the transmitter, the receiver and the USART. */ + qtest_writel(qts, (USART1_BASE_ADDR + A_CR1), + R_CR1_UE_MASK | R_CR1_RE_MASK | R_CR1_TE_MASK); +} + +static void test_write_read(void) +{ + QTestState *qts = qtest_init("-M b-l475e-iot01a"); + + /* Test that we can write and retrieve a value from the device */ + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 0xFFFFFFFF); + const uint32_t tdr = qtest_readl(qts, USART1_BASE_ADDR + A_TDR); + g_assert_cmpuint(tdr, ==, 0x000001FF); +} + +static void test_receive_char(void) +{ + int sock_fd; + uint32_t cr1; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + /* Try without initializing IRQ */ + g_assert_true(send(sock_fd, "a", 1, 0) == 1); + usart_wait_for_flag(qts, USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK); + g_assert_cmphex(qtest_readl(qts, USART1_BASE_ADDR + A_RDR), ==, 'a'); + g_assert_false(check_nvic_pending(qts, USART1_IRQ)); + + /* Now with the IRQ */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 |= R_CR1_RXNEIE_MASK; + qtest_writel(qts, USART1_BASE_ADDR + A_CR1, cr1); + g_assert_true(send(sock_fd, "b", 1, 0) == 1); + usart_wait_for_flag(qts, USART1_BASE_ADDR + A_ISR, R_ISR_RXNE_MASK); + g_assert_cmphex(qtest_readl(qts, USART1_BASE_ADDR + A_RDR), ==, 'b'); + g_assert_true(check_nvic_pending(qts, USART1_IRQ)); + clear_nvic_pending(qts, USART1_IRQ); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_send_char(void) +{ + int sock_fd; + char s[1]; + uint32_t cr1; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + /* Try without initializing IRQ */ + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 'c'); + g_assert_true(recv(sock_fd, s, 1, 0) == 1); + g_assert_cmphex(s[0], ==, 'c'); + g_assert_false(check_nvic_pending(qts, USART1_IRQ)); + + /* Now with the IRQ */ + cr1 = qtest_readl(qts, (USART1_BASE_ADDR + A_CR1)); + cr1 |= R_CR1_TXEIE_MASK; + qtest_writel(qts, USART1_BASE_ADDR + A_CR1, cr1); + qtest_writel(qts, USART1_BASE_ADDR + A_TDR, 'd'); + g_assert_true(recv(sock_fd, s, 1, 0) == 1); + g_assert_cmphex(s[0], ==, 'd'); + g_assert_true(check_nvic_pending(qts, USART1_IRQ)); + clear_nvic_pending(qts, USART1_IRQ); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_receive_str(void) +{ + int sock_fd; + char s[10]; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + usart_receive_string(qts, sock_fd, "hello", s); + g_assert_true(memcmp(s, "hello", 5) == 0); + + close(sock_fd); + + qtest_quit(qts); +} + +static void test_send_str(void) +{ + int sock_fd; + char s[10]; + QTestState *qts = qtest_init_with_serial("-M b-l475e-iot01a", &sock_fd); + + init_uart(qts); + + usart_send_string(qts, "world"); + g_assert_true(recv(sock_fd, s, 10, 0) == 5); + g_assert_true(memcmp(s, "world", 5) == 0); + + close(sock_fd); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); + + qtest_add_func("stm32l4x5/usart/write_read", test_write_read); + qtest_add_func("stm32l4x5/usart/receive_char", test_receive_char); + qtest_add_func("stm32l4x5/usart/send_char", test_send_char); + qtest_add_func("stm32l4x5/usart/receive_str", test_receive_str); + qtest_add_func("stm32l4x5/usart/send_str", test_send_str); + ret = g_test_run(); + + return ret; +} + diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ slow_qtests = { 'npcm7xx_pwm-test': 300, 'npcm7xx_watchdog_timer-test': 120, 'qom-test' : 900, + 'stm32l4x5_usart-test' : 600, 'test-hmp' : 240, 'pxe-test': 610, 'prom-env-test': 360, @@ -XXX,XX +XXX,XX @@ qtests_stm32l4x5 = \ ['stm32l4x5_exti-test', 'stm32l4x5_syscfg-test', 'stm32l4x5_rcc-test', - 'stm32l4x5_gpio-test'] + 'stm32l4x5_gpio-test', + 'stm32l4x5_usart-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \ -- 2.34.1