The following changes since commit 3db29dcac23da85486704ef9e7a8e7217f7829cd: Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging (2023-01-12 13:51:36 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230113 for you to fetch changes up to 08899b5c68a55a3780d707e2464073c8f2670d31: target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled (2023-01-13 13:19:36 +0000) ---------------------------------------------------------------- target-arm queue: hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 board cubieboard: Support booting from an SD card image with u-boot on it target/arm: Fix sve_probe_page target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled various code cleanups ---------------------------------------------------------------- Evgeny Iakovlev (1): target/arm: allow writes to SCR_EL3.HXEn bit when FEAT_HCX is enabled Felipe Balbi (2): hw/arm/stm32f405: correctly describe the memory layout hw/arm: Add Olimex H405 Philippe Mathieu-Daudé (27): hw/arm/pxa2xx: Simplify pxa255_init() hw/arm/pxa2xx: Simplify pxa270_init() hw/arm/collie: Use the IEC binary prefix definitions hw/arm/collie: Simplify flash creation using for() loop hw/arm/gumstix: Improve documentation hw/arm/gumstix: Use the IEC binary prefix definitions hw/arm/mainstone: Use the IEC binary prefix definitions hw/arm/musicpal: Use the IEC binary prefix definitions hw/arm/omap_sx1: Remove unused 'total_ram' definitions hw/arm/omap_sx1: Use the IEC binary prefix definitions hw/arm/z2: Use the IEC binary prefix definitions hw/arm/vexpress: Remove dead code in vexpress_common_init() hw/arm: Remove unreachable code calling pflash_cfi01_register() hw/arm/pxa: Avoid forward-declaring PXA2xxI2CState hw/gpio/omap_gpio: Add local variable to avoid embedded cast hw/arm/omap: Drop useless casts from void * to pointer hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP1_GPIO type name hw/gpio/omap_gpio: Use CamelCase for TYPE_OMAP2_GPIO type name hw/intc/omap_intc: Use CamelCase for TYPE_OMAP_INTC type name hw/arm/stellaris: Drop useless casts from void * to pointer hw/arm/stellaris: Use CamelCase for STELLARIS_ADC type name hw/arm/bcm2836: Remove definitions generated by OBJECT_DECLARE_TYPE() hw/arm/npcm7xx: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/misc/sbsa_ec: Rename TYPE_SBSA_EC -> TYPE_SBSA_SECURE_EC hw/misc/sbsa_ec: Declare QOM macros using OBJECT_DECLARE_SIMPLE_TYPE() hw/intc/xilinx_intc: Use 'XpsIntc' typedef instead of 'struct xlx_pic' hw/timer/xilinx_timer: Use XpsTimerState instead of 'struct timerblock' Richard Henderson (1): target/arm: Fix sve_probe_page Strahinja Jankovic (7): hw/misc: Allwinner-A10 Clock Controller Module Emulation hw/misc: Allwinner A10 DRAM Controller Emulation {hw/i2c,docs/system/arm}: Allwinner TWI/I2C Emulation hw/misc: AXP209 PMU Emulation hw/arm: Add AXP209 to Cubieboard hw/arm: Allwinner A10 enable SPL load from MMC tests/avocado: Add SD boot test to Cubieboard docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + include/hw/adc/npcm7xx_adc.h | 7 +- include/hw/arm/allwinner-a10.h | 27 ++ include/hw/arm/allwinner-h3.h | 3 + include/hw/arm/npcm7xx.h | 18 +- include/hw/arm/omap.h | 24 +- include/hw/arm/pxa.h | 11 +- include/hw/arm/stm32f405_soc.h | 5 +- include/hw/i2c/allwinner-i2c.h | 55 ++++ include/hw/i2c/npcm7xx_smbus.h | 7 +- include/hw/misc/allwinner-a10-ccm.h | 67 +++++ include/hw/misc/allwinner-a10-dramc.h | 68 +++++ include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +- include/hw/misc/npcm7xx_mft.h | 7 +- include/hw/misc/npcm7xx_pwm.h | 3 +- include/hw/misc/npcm7xx_rng.h | 6 +- include/hw/net/npcm7xx_emc.h | 5 +- include/hw/sd/npcm7xx_sdhci.h | 4 +- hw/arm/allwinner-a10.c | 40 +++ hw/arm/allwinner-h3.c | 11 +- hw/arm/bcm2836.c | 9 +- hw/arm/collie.c | 25 +- hw/arm/cubieboard.c | 11 + hw/arm/gumstix.c | 45 ++-- hw/arm/mainstone.c | 37 ++- hw/arm/musicpal.c | 9 +- hw/arm/olimex-stm32-h405.c | 69 +++++ hw/arm/omap1.c | 115 ++++---- hw/arm/omap2.c | 40 ++- hw/arm/omap_sx1.c | 53 ++-- hw/arm/palm.c | 2 +- hw/arm/pxa2xx.c | 8 +- hw/arm/spitz.c | 6 +- hw/arm/stellaris.c | 73 +++-- hw/arm/stm32f405_soc.c | 8 + hw/arm/tosa.c | 2 +- hw/arm/versatilepb.c | 6 +- hw/arm/vexpress.c | 10 +- hw/arm/z2.c | 16 +- hw/char/omap_uart.c | 7 +- hw/display/omap_dss.c | 15 +- hw/display/omap_lcdc.c | 9 +- hw/dma/omap_dma.c | 15 +- hw/gpio/omap_gpio.c | 48 ++-- hw/i2c/allwinner-i2c.c | 459 ++++++++++++++++++++++++++++++++ hw/intc/omap_intc.c | 38 +-- hw/intc/xilinx_intc.c | 28 +- hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++ hw/misc/allwinner-a10-dramc.c | 179 +++++++++++++ hw/misc/axp209.c | 238 +++++++++++++++++ hw/misc/omap_gpmc.c | 12 +- hw/misc/omap_l4.c | 7 +- hw/misc/omap_sdrc.c | 7 +- hw/misc/omap_tap.c | 5 +- hw/misc/sbsa_ec.c | 12 +- hw/sd/omap_mmc.c | 9 +- hw/ssi/omap_spi.c | 7 +- hw/timer/omap_gptimer.c | 22 +- hw/timer/omap_synctimer.c | 4 +- hw/timer/xilinx_timer.c | 27 +- target/arm/helper.c | 3 + target/arm/sve_helper.c | 14 +- MAINTAINERS | 8 + hw/arm/Kconfig | 9 + hw/arm/meson.build | 1 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + hw/misc/Kconfig | 10 + hw/misc/meson.build | 3 + hw/misc/trace-events | 5 + tests/avocado/boot_linux_console.py | 47 ++++ 76 files changed, 1951 insertions(+), 455 deletions(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/arm/olimex-stm32-h405.c create mode 100644 hw/i2c/allwinner-i2c.c create mode 100644 hw/misc/allwinner-a10-ccm.c create mode 100644 hw/misc/allwinner-a10-dramc.c create mode 100644 hw/misc/axp209.c From: Felipe Balbi <balbi@kernel.org> STM32F405 has 128K of SRAM and another 64K of CCM (Core-coupled Memory) at a different base address. Correctly describe the memory layout to give existing FW images a chance to run unmodified. Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Message-id: 20221230145733.200496-2-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/stm32f405_soc.h | 5 ++++- hw/arm/stm32f405_soc.c | 8 ++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/stm32f405_soc.h b/include/hw/arm/stm32f405_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/stm32f405_soc.h +++ b/include/hw/arm/stm32f405_soc.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(STM32F405State, STM32F405_SOC) #define FLASH_BASE_ADDRESS 0x08000000 #define FLASH_SIZE (1024 * 1024) #define SRAM_BASE_ADDRESS 0x20000000 -#define SRAM_SIZE (192 * 1024) +#define SRAM_SIZE (128 * 1024) +#define CCM_BASE_ADDRESS 0x10000000 +#define CCM_SIZE (64 * 1024) struct STM32F405State { /*< private >*/ @@ -XXX,XX +XXX,XX @@ struct STM32F405State { STM32F2XXADCState adc[STM_NUM_ADCS]; STM32F2XXSPIState spi[STM_NUM_SPIS]; + MemoryRegion ccm; MemoryRegion sram; MemoryRegion flash; MemoryRegion flash_alias; diff --git a/hw/arm/stm32f405_soc.c b/hw/arm/stm32f405_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stm32f405_soc.c +++ b/hw/arm/stm32f405_soc.c @@ -XXX,XX +XXX,XX @@ static void stm32f405_soc_realize(DeviceState *dev_soc, Error **errp) } memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, &s->sram); + memory_region_init_ram(&s->ccm, NULL, "STM32F405.ccm", CCM_SIZE, + &err); + if (err != NULL) { + error_propagate(errp, err); + return; + } + memory_region_add_subregion(system_memory, CCM_BASE_ADDRESS, &s->ccm); + armv7m = DEVICE(&s->armv7m); qdev_prop_set_uint32(armv7m, "num-irq", 96); qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type); -- 2.34.1 From: Felipe Balbi <balbi@kernel.org> Olimex makes a series of low-cost STM32 boards. This commit introduces the minimum setup to support SMT32-H405. See [1] for details [1] https://www.olimex.com/Products/ARM/ST/STM32-H405/ Signed-off-by: Felipe Balbi <balbi@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20221230145733.200496-3-balbi@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/stm32.rst | 1 + configs/devices/arm-softmmu/default.mak | 1 + hw/arm/olimex-stm32-h405.c | 69 +++++++++++++++++++++++++ MAINTAINERS | 6 +++ hw/arm/Kconfig | 4 ++ hw/arm/meson.build | 1 + 6 files changed, 82 insertions(+) create mode 100644 hw/arm/olimex-stm32-h405.c diff --git a/docs/system/arm/stm32.rst b/docs/system/arm/stm32.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/stm32.rst +++ b/docs/system/arm/stm32.rst @@ -XXX,XX +XXX,XX @@ The STM32F4 series is based on ARM Cortex-M4F core. This series is pin-to-pin compatible with STM32F2 series. The following machines are based on this chip : - ``netduinoplus2`` Netduino Plus 2 board with STM32F405RGT6 microcontroller +- ``olimex-stm32-h405`` Olimex STM32 H405 board with STM32F405RGT6 microcontroller There are many other STM32 series that are currently not supported by QEMU. diff --git a/configs/devices/arm-softmmu/default.mak b/configs/devices/arm-softmmu/default.mak index XXXXXXX..XXXXXXX 100644 --- a/configs/devices/arm-softmmu/default.mak +++ b/configs/devices/arm-softmmu/default.mak @@ -XXX,XX +XXX,XX @@ CONFIG_COLLIE=y CONFIG_ASPEED_SOC=y CONFIG_NETDUINO2=y CONFIG_NETDUINOPLUS2=y +CONFIG_OLIMEX_STM32_H405=y CONFIG_MPS2=y CONFIG_RASPI=y CONFIG_DIGIC=y diff --git a/hw/arm/olimex-stm32-h405.c b/hw/arm/olimex-stm32-h405.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/olimex-stm32-h405.c @@ -XXX,XX +XXX,XX @@ +/* + * ST STM32VLDISCOVERY machine + * Olimex STM32-H405 machine + * + * Copyright (c) 2022 Felipe Balbi <balbi@kernel.org> + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "hw/boards.h" +#include "hw/qdev-properties.h" +#include "hw/qdev-clock.h" +#include "qemu/error-report.h" +#include "hw/arm/stm32f405_soc.h" +#include "hw/arm/boot.h" + +/* olimex-stm32-h405 implementation is derived from netduinoplus2 */ + +/* Main SYSCLK frequency in Hz (168MHz) */ +#define SYSCLK_FRQ 168000000ULL + +static void olimex_stm32_h405_init(MachineState *machine) +{ + DeviceState *dev; + Clock *sysclk; + + /* This clock doesn't need migration because it is fixed-frequency */ + sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(sysclk, SYSCLK_FRQ); + + dev = qdev_new(TYPE_STM32F405_SOC); + qdev_prop_set_string(dev, "cpu-type", ARM_CPU_TYPE_NAME("cortex-m4")); + qdev_connect_clock_in(dev, "sysclk", sysclk); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + + armv7m_load_kernel(ARM_CPU(first_cpu), + machine->kernel_filename, + 0, FLASH_SIZE); +} + +static void olimex_stm32_h405_machine_init(MachineClass *mc) +{ + mc->desc = "Olimex STM32-H405 (Cortex-M4)"; + mc->init = olimex_stm32_h405_init; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4"); + + /* SRAM pre-allocated as part of the SoC instantiation */ + mc->default_ram_size = 0; +} + +DEFINE_MACHINE("olimex-stm32-h405", olimex_stm32_h405_machine_init) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ L: qemu-arm@nongnu.org S: Maintained F: hw/arm/netduinoplus2.c +Olimex STM32 H405 +M: Felipe Balbi <balbi@kernel.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/olimex-stm32-h405.c + SmartFusion2 M: Subbaraya Sundeep <sundeep.lkml@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config NETDUINOPLUS2 bool select STM32F405_SOC +config OLIMEX_STM32_H405 + bool + select STM32F405_SOC + config NSERIES bool select OMAP diff --git a/hw/arm/meson.build b/hw/arm/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/meson.build +++ b/hw/arm/meson.build @@ -XXX,XX +XXX,XX @@ arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c')) arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c')) arm_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c')) arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c')) +arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c')) arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c')) arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c')) arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several Clock Controller Module (CCM) registers are read, most important are PLL and Tuning, as well as divisor registers. This patch adds these registers and initializes reset values from user's guide. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-2-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-ccm.h | 67 +++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-ccm.c | 224 ++++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 305 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-ccm.h create mode 100644 hw/misc/allwinner-a10-ccm.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/misc/allwinner-a10-ccm.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { /*< public >*/ ARMCPU cpu; + AwA10ClockCtlState ccm; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-ccm.h b/include/hw/misc/allwinner-a10-ccm.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-ccm.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_CCM_H +#define HW_MISC_ALLWINNER_A10_CCM_H + +#include "qom/object.h" +#include "hw/sysbus.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by CCM device */ +#define AW_A10_CCM_IOSIZE (0x400) + +/** Total number of known registers */ +#define AW_A10_CCM_REGS_NUM (AW_A10_CCM_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_CCM "allwinner-a10-ccm" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10ClockCtlState, AW_A10_CCM) + +/** @} */ + +/** + * Allwinner A10 CCM object instance state. + */ +struct AwA10ClockCtlState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_CCM_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_H3_CCU_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ohci.h" #define AW_A10_MMC0_BASE 0x01c0f000 +#define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 #define AW_A10_PIT_REG_BASE 0x01c20c00 #define AW_A10_UART0_REG_BASE 0x01c28000 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "timer", &s->timer, TYPE_AW_A10_PIT); + object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) memory_region_add_subregion(get_system_memory(), 0x00000000, &s->sram_a); create_unimplemented_device("a10-sram-ctrl", 0x01c00000, 4 * KiB); + /* Clock Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-ccm.c b/hw/misc/allwinner-a10-ccm.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-ccm.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 Clock Control Module emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 CCU, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-ccm.h" + +/* CCM register offsets */ +enum { + REG_PLL1_CFG = 0x0000, /* PLL1 Control */ + REG_PLL1_TUN = 0x0004, /* PLL1 Tuning */ + REG_PLL2_CFG = 0x0008, /* PLL2 Control */ + REG_PLL2_TUN = 0x000C, /* PLL2 Tuning */ + REG_PLL3_CFG = 0x0010, /* PLL3 Control */ + REG_PLL4_CFG = 0x0018, /* PLL4 Control */ + REG_PLL5_CFG = 0x0020, /* PLL5 Control */ + REG_PLL5_TUN = 0x0024, /* PLL5 Tuning */ + REG_PLL6_CFG = 0x0028, /* PLL6 Control */ + REG_PLL6_TUN = 0x002C, /* PLL6 Tuning */ + REG_PLL7_CFG = 0x0030, /* PLL7 Control */ + REG_PLL1_TUN2 = 0x0038, /* PLL1 Tuning2 */ + REG_PLL5_TUN2 = 0x003C, /* PLL5 Tuning2 */ + REG_PLL8_CFG = 0x0040, /* PLL8 Control */ + REG_OSC24M_CFG = 0x0050, /* OSC24M Control */ + REG_CPU_AHB_APB0_CFG = 0x0054, /* CPU, AHB and APB0 Divide Ratio */ +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* CCM register reset values */ +enum { + REG_PLL1_CFG_RST = 0x21005000, + REG_PLL1_TUN_RST = 0x0A101000, + REG_PLL2_CFG_RST = 0x08100010, + REG_PLL2_TUN_RST = 0x00000000, + REG_PLL3_CFG_RST = 0x0010D063, + REG_PLL4_CFG_RST = 0x21009911, + REG_PLL5_CFG_RST = 0x11049280, + REG_PLL5_TUN_RST = 0x14888000, + REG_PLL6_CFG_RST = 0x21009911, + REG_PLL6_TUN_RST = 0x00000000, + REG_PLL7_CFG_RST = 0x0010D063, + REG_PLL1_TUN2_RST = 0x00000000, + REG_PLL5_TUN2_RST = 0x00000000, + REG_PLL8_CFG_RST = 0x21009911, + REG_OSC24M_CFG_RST = 0x00138013, + REG_CPU_AHB_APB0_CFG_RST = 0x00010010, +}; + +static uint64_t allwinner_a10_ccm_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_ccm_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10ClockCtlState *s = AW_A10_CCM(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_PLL1_CFG: + case REG_PLL1_TUN: + case REG_PLL2_CFG: + case REG_PLL2_TUN: + case REG_PLL3_CFG: + case REG_PLL4_CFG: + case REG_PLL5_CFG: + case REG_PLL5_TUN: + case REG_PLL6_CFG: + case REG_PLL6_TUN: + case REG_PLL7_CFG: + case REG_PLL1_TUN2: + case REG_PLL5_TUN2: + case REG_PLL8_CFG: + case REG_OSC24M_CFG: + case REG_CPU_AHB_APB0_CFG: + break; + case 0x158 ... AW_A10_CCM_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_ccm_ops = { + .read = allwinner_a10_ccm_read, + .write = allwinner_a10_ccm_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_ccm_reset_enter(Object *obj, ResetType type) +{ + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_PLL1_CFG)] = REG_PLL1_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN)] = REG_PLL1_TUN_RST; + s->regs[REG_INDEX(REG_PLL2_CFG)] = REG_PLL2_CFG_RST; + s->regs[REG_INDEX(REG_PLL2_TUN)] = REG_PLL2_TUN_RST; + s->regs[REG_INDEX(REG_PLL3_CFG)] = REG_PLL3_CFG_RST; + s->regs[REG_INDEX(REG_PLL4_CFG)] = REG_PLL4_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_CFG)] = REG_PLL5_CFG_RST; + s->regs[REG_INDEX(REG_PLL5_TUN)] = REG_PLL5_TUN_RST; + s->regs[REG_INDEX(REG_PLL6_CFG)] = REG_PLL6_CFG_RST; + s->regs[REG_INDEX(REG_PLL6_TUN)] = REG_PLL6_TUN_RST; + s->regs[REG_INDEX(REG_PLL7_CFG)] = REG_PLL7_CFG_RST; + s->regs[REG_INDEX(REG_PLL1_TUN2)] = REG_PLL1_TUN2_RST; + s->regs[REG_INDEX(REG_PLL5_TUN2)] = REG_PLL5_TUN2_RST; + s->regs[REG_INDEX(REG_PLL8_CFG)] = REG_PLL8_CFG_RST; + s->regs[REG_INDEX(REG_OSC24M_CFG)] = REG_OSC24M_CFG_RST; + s->regs[REG_INDEX(REG_CPU_AHB_APB0_CFG)] = REG_CPU_AHB_APB0_CFG_RST; +} + +static void allwinner_a10_ccm_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10ClockCtlState *s = AW_A10_CCM(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_ccm_ops, s, + TYPE_AW_A10_CCM, AW_A10_CCM_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_ccm_vmstate = { + .name = "allwinner-a10-ccm", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10ClockCtlState, AW_A10_CCM_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_ccm_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_ccm_reset_enter; + dc->vmsd = &allwinner_a10_ccm_vmstate; +} + +static const TypeInfo allwinner_a10_ccm_info = { + .name = TYPE_AW_A10_CCM, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_ccm_init, + .instance_size = sizeof(AwA10ClockCtlState), + .class_init = allwinner_a10_ccm_class_init, +}; + +static void allwinner_a10_ccm_register(void) +{ + type_register_static(&allwinner_a10_ccm_info); +} + +type_init(allwinner_a10_ccm_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select AHCI select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC + select ALLWINNER_A10_CCM select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config VIRT_CTRL config LASI bool +config ALLWINNER_A10_CCM + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> During SPL boot several DRAM Controller registers are used. Most important registers are those related to DRAM initialization and calibration, where SPL initiates process and waits until certain bit is set/cleared. This patch adds these registers, initializes reset values from user's guide and updates state of registers as SPL expects it. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-3-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 2 + include/hw/misc/allwinner-a10-dramc.h | 68 ++++++++++ hw/arm/allwinner-a10.c | 7 + hw/misc/allwinner-a10-dramc.c | 179 ++++++++++++++++++++++++++ hw/arm/Kconfig | 1 + hw/misc/Kconfig | 3 + hw/misc/meson.build | 1 + 7 files changed, 261 insertions(+) create mode 100644 include/hw/misc/allwinner-a10-dramc.h create mode 100644 hw/misc/allwinner-a10-dramc.c diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/usb/hcd-ehci.h" #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" +#include "hw/misc/allwinner-a10-dramc.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { ARMCPU cpu; AwA10ClockCtlState ccm; + AwA10DramControllerState dramc; AwA10PITState timer; AwA10PICState intc; AwEmacState emac; diff --git a/include/hw/misc/allwinner-a10-dramc.h b/include/hw/misc/allwinner-a10-dramc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/allwinner-a10-dramc.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_MISC_ALLWINNER_A10_DRAMC_H +#define HW_MISC_ALLWINNER_A10_DRAMC_H + +#include "qom/object.h" +#include "hw/sysbus.h" +#include "hw/register.h" + +/** + * @name Constants + * @{ + */ + +/** Size of register I/O address space used by DRAMC device */ +#define AW_A10_DRAMC_IOSIZE (0x1000) + +/** Total number of known registers */ +#define AW_A10_DRAMC_REGS_NUM (AW_A10_DRAMC_IOSIZE / sizeof(uint32_t)) + +/** @} */ + +/** + * @name Object model + * @{ + */ + +#define TYPE_AW_A10_DRAMC "allwinner-a10-dramc" +OBJECT_DECLARE_SIMPLE_TYPE(AwA10DramControllerState, AW_A10_DRAMC) + +/** @} */ + +/** + * Allwinner A10 DRAMC object instance state. + */ +struct AwA10DramControllerState { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + /** Maps I/O registers in physical memory */ + MemoryRegion iomem; + + /** Array of hardware registers */ + uint32_t regs[AW_A10_DRAMC_REGS_NUM]; +}; + +#endif /* HW_MISC_ALLWINNER_A10_DRAMC_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 #define AW_A10_PIC_REG_BASE 0x01c20400 @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "ccm", &s->ccm, TYPE_AW_A10_CCM); + object_initialize_child(obj, "dramc", &s->dramc, TYPE_AW_A10_DRAMC); + object_initialize_child(obj, "emac", &s->emac, TYPE_AW_EMAC); object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, AW_A10_CCM_BASE); + /* DRAM Control Module */ + sysbus_realize(SYS_BUS_DEVICE(&s->dramc), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->dramc), 0, AW_A10_DRAMC_BASE); + /* FIXME use qdev NIC properties instead of nd_table[] */ if (nd_table[0].used) { qemu_check_nic_model(&nd_table[0], TYPE_AW_EMAC); diff --git a/hw/misc/allwinner-a10-dramc.c b/hw/misc/allwinner-a10-dramc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/allwinner-a10-dramc.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner A10 DRAM Controller emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from Allwinner H3 DRAMC, + * by Niek Linnenbank. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "hw/sysbus.h" +#include "migration/vmstate.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "hw/misc/allwinner-a10-dramc.h" + +/* DRAMC register offsets */ +enum { + REG_SDR_CCR = 0x0000, + REG_SDR_ZQCR0 = 0x00a8, + REG_SDR_ZQSR = 0x00b0 +}; + +#define REG_INDEX(offset) (offset / sizeof(uint32_t)) + +/* DRAMC register flags */ +enum { + REG_SDR_CCR_DATA_TRAINING = (1 << 30), + REG_SDR_CCR_DRAM_INIT = (1 << 31), +}; +enum { + REG_SDR_ZQSR_ZCAL = (1 << 31), +}; + +/* DRAMC register reset values */ +enum { + REG_SDR_CCR_RESET = 0x80020000, + REG_SDR_ZQCR0_RESET = 0x07b00000, + REG_SDR_ZQSR_RESET = 0x80000000 +}; + +static uint64_t allwinner_a10_dramc_read(void *opaque, hwaddr offset, + unsigned size) +{ + const AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + case REG_SDR_ZQCR0: + case REG_SDR_ZQSR: + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented read offset 0x%04x\n", + __func__, (uint32_t)offset); + return 0; + } + + return s->regs[idx]; +} + +static void allwinner_a10_dramc_write(void *opaque, hwaddr offset, + uint64_t val, unsigned size) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(opaque); + const uint32_t idx = REG_INDEX(offset); + + switch (offset) { + case REG_SDR_CCR: + if (val & REG_SDR_CCR_DRAM_INIT) { + /* Clear DRAM_INIT to indicate process is done. */ + val &= ~REG_SDR_CCR_DRAM_INIT; + } + if (val & REG_SDR_CCR_DATA_TRAINING) { + /* Clear DATA_TRAINING to indicate process is done. */ + val &= ~REG_SDR_CCR_DATA_TRAINING; + } + break; + case REG_SDR_ZQCR0: + /* Set ZCAL in ZQSR to indicate calibration is done. */ + s->regs[REG_INDEX(REG_SDR_ZQSR)] |= REG_SDR_ZQSR_ZCAL; + break; + case 0x2e4 ... AW_A10_DRAMC_IOSIZE: + qemu_log_mask(LOG_GUEST_ERROR, "%s: out-of-bounds offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + default: + qemu_log_mask(LOG_UNIMP, "%s: unimplemented write offset 0x%04x\n", + __func__, (uint32_t)offset); + break; + } + + s->regs[idx] = (uint32_t) val; +} + +static const MemoryRegionOps allwinner_a10_dramc_ops = { + .read = allwinner_a10_dramc_read, + .write = allwinner_a10_dramc_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, + .impl.min_access_size = 4, +}; + +static void allwinner_a10_dramc_reset_enter(Object *obj, ResetType type) +{ + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Set default values for registers */ + s->regs[REG_INDEX(REG_SDR_CCR)] = REG_SDR_CCR_RESET; + s->regs[REG_INDEX(REG_SDR_ZQCR0)] = REG_SDR_ZQCR0_RESET; + s->regs[REG_INDEX(REG_SDR_ZQSR)] = REG_SDR_ZQSR_RESET; +} + +static void allwinner_a10_dramc_init(Object *obj) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + AwA10DramControllerState *s = AW_A10_DRAMC(obj); + + /* Memory mapping */ + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_a10_dramc_ops, s, + TYPE_AW_A10_DRAMC, AW_A10_DRAMC_IOSIZE); + sysbus_init_mmio(sbd, &s->iomem); +} + +static const VMStateDescription allwinner_a10_dramc_vmstate = { + .name = "allwinner-a10-dramc", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AwA10DramControllerState, + AW_A10_DRAMC_REGS_NUM), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_a10_dramc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.enter = allwinner_a10_dramc_reset_enter; + dc->vmsd = &allwinner_a10_dramc_vmstate; +} + +static const TypeInfo allwinner_a10_dramc_info = { + .name = TYPE_AW_A10_DRAMC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = allwinner_a10_dramc_init, + .instance_size = sizeof(AwA10DramControllerState), + .class_init = allwinner_a10_dramc_class_init, +}; + +static void allwinner_a10_dramc_register(void) +{ + type_register_static(&allwinner_a10_dramc_info); +} + +type_init(allwinner_a10_dramc_register) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_PIT select ALLWINNER_A10_PIC select ALLWINNER_A10_CCM + select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select SERIAL select UNIMP diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config LASI config ALLWINNER_A10_CCM bool +config ALLWINNER_A10_DRAMC + bool + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ subdir('macio') softmmu_ss.add(when: 'CONFIG_IVSHMEM_DEVICE', if_true: files('ivshmem.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_CCM', if_true: files('allwinner-a10-ccm.c')) +softmmu_ss.add(when: 'CONFIG_ALLWINNER_A10_DRAMC', if_true: files('allwinner-a10-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-ccu.c')) specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch implements Allwinner TWI/I2C controller emulation. Only master-mode functionality is implemented. The SPL boot for Cubieboard expects AXP209 PMIC on TWI0/I2C0 bus, so this is first part enabling the TWI/I2C bus operation. Since both Allwinner A10 and H3 use the same module, it is added for both boards. Docs are also updated for Cubieboard and Orangepi-PC board to indicate I2C availability. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-4-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/cubieboard.rst | 1 + docs/system/arm/orangepi.rst | 1 + include/hw/arm/allwinner-a10.h | 2 + include/hw/arm/allwinner-h3.h | 3 + include/hw/i2c/allwinner-i2c.h | 55 ++++ hw/arm/allwinner-a10.c | 8 + hw/arm/allwinner-h3.c | 11 +- hw/i2c/allwinner-i2c.c | 459 +++++++++++++++++++++++++++++++++ hw/arm/Kconfig | 2 + hw/i2c/Kconfig | 4 + hw/i2c/meson.build | 1 + hw/i2c/trace-events | 5 + 12 files changed, 551 insertions(+), 1 deletion(-) create mode 100644 include/hw/i2c/allwinner-i2c.h create mode 100644 hw/i2c/allwinner-i2c.c diff --git a/docs/system/arm/cubieboard.rst b/docs/system/arm/cubieboard.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/cubieboard.rst +++ b/docs/system/arm/cubieboard.rst @@ -XXX,XX +XXX,XX @@ Emulated devices: - SDHCI - USB controller - SATA controller +- TWI (I2C) controller diff --git a/docs/system/arm/orangepi.rst b/docs/system/arm/orangepi.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/orangepi.rst +++ b/docs/system/arm/orangepi.rst @@ -XXX,XX +XXX,XX @@ The Orange Pi PC machine supports the following devices: * Clock Control Unit * System Control module * Security Identifier device + * TWI (I2C) Limitations """"""""""" diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/rtc/allwinner-rtc.h" #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { AwEmacState emac; AllwinnerAHCIState sata; AwSdHostState mmc0; + AWI2CState i2c0; AwRtcState rtc; MemoryRegion sram_a; EHCISysBusState ehci[AW_A10_NUM_USB]; diff --git a/include/hw/arm/allwinner-h3.h b/include/hw/arm/allwinner-h3.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-h3.h +++ b/include/hw/arm/allwinner-h3.h @@ -XXX,XX +XXX,XX @@ #include "hw/sd/allwinner-sdhost.h" #include "hw/net/allwinner-sun8i-emac.h" #include "hw/rtc/allwinner-rtc.h" +#include "hw/i2c/allwinner-i2c.h" #include "target/arm/cpu.h" #include "sysemu/block-backend.h" @@ -XXX,XX +XXX,XX @@ enum { AW_H3_DEV_UART2, AW_H3_DEV_UART3, AW_H3_DEV_EMAC, + AW_H3_DEV_TWI0, AW_H3_DEV_DRAMCOM, AW_H3_DEV_DRAMCTL, AW_H3_DEV_DRAMPHY, @@ -XXX,XX +XXX,XX @@ struct AwH3State { AwH3SysCtrlState sysctrl; AwSidState sid; AwSdHostState mmc0; + AWI2CState i2c0; AwSun8iEmacState emac; AwRtcState rtc; GICState gic; diff --git a/include/hw/i2c/allwinner-i2c.h b/include/hw/i2c/allwinner-i2c.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/i2c/allwinner-i2c.h @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface registers definition + * + * Copyright (C) 2022 Strahinja Jankovic. <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + */ + +#ifndef ALLWINNER_I2C_H +#define ALLWINNER_I2C_H + +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_AW_I2C "allwinner.i2c" +OBJECT_DECLARE_SIMPLE_TYPE(AWI2CState, AW_I2C) + +#define AW_I2C_MEM_SIZE 0x24 + +struct AWI2CState { + /*< private >*/ + SysBusDevice parent_obj; + + /*< public >*/ + MemoryRegion iomem; + I2CBus *bus; + qemu_irq irq; + + uint8_t addr; + uint8_t xaddr; + uint8_t data; + uint8_t cntr; + uint8_t stat; + uint8_t ccr; + uint8_t srst; + uint8_t efr; + uint8_t lcr; +}; + +#endif /* ALLWINNER_I2C_H */ diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #define AW_A10_OHCI_BASE 0x01c14400 #define AW_A10_SATA_BASE 0x01c18000 #define AW_A10_RTC_BASE 0x01c20d00 +#define AW_A10_I2C0_BASE 0x01c2ac00 static void aw_a10_init(Object *obj) { @@ -XXX,XX +XXX,XX @@ static void aw_a10_init(Object *obj) object_initialize_child(obj, "sata", &s->sata, TYPE_ALLWINNER_AHCI); + object_initialize_child(obj, "i2c0", &s->i2c0, TYPE_AW_I2C); + if (machine_usb(current_machine)) { int i; @@ -XXX,XX +XXX,XX @@ static void aw_a10_realize(DeviceState *dev, Error **errp) /* RTC */ sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->rtc), 0, AW_A10_RTC_BASE, 10); + + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, AW_A10_I2C0_BASE); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, qdev_get_gpio_in(dev, 7)); } static void aw_a10_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/allwinner-h3.c b/hw/arm/allwinner-h3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-h3.c +++ b/hw/arm/allwinner-h3.c @@ -XXX,XX +XXX,XX @@ const hwaddr allwinner_h3_memmap[] = { [AW_H3_DEV_UART1] = 0x01c28400, [AW_H3_DEV_UART2] = 0x01c28800, [AW_H3_DEV_UART3] = 0x01c28c00, + [AW_H3_DEV_TWI0] = 0x01c2ac00, [AW_H3_DEV_EMAC] = 0x01c30000, [AW_H3_DEV_DRAMCOM] = 0x01c62000, [AW_H3_DEV_DRAMCTL] = 0x01c63000, @@ -XXX,XX +XXX,XX @@ struct AwH3Unimplemented { { "uart1", 0x01c28400, 1 * KiB }, { "uart2", 0x01c28800, 1 * KiB }, { "uart3", 0x01c28c00, 1 * KiB }, - { "twi0", 0x01c2ac00, 1 * KiB }, { "twi1", 0x01c2b000, 1 * KiB }, { "twi2", 0x01c2b400, 1 * KiB }, { "scr", 0x01c2c400, 1 * KiB }, @@ -XXX,XX +XXX,XX @@ enum { AW_H3_GIC_SPI_UART1 = 1, AW_H3_GIC_SPI_UART2 = 2, AW_H3_GIC_SPI_UART3 = 3, + AW_H3_GIC_SPI_TWI0 = 6, AW_H3_GIC_SPI_TIMER0 = 18, AW_H3_GIC_SPI_TIMER1 = 19, AW_H3_GIC_SPI_MMC0 = 60, @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_init(Object *obj) "ram-size"); object_initialize_child(obj, "rtc", &s->rtc, TYPE_AW_RTC_SUN6I); + + object_initialize_child(obj, "twi0", &s->i2c0, TYPE_AW_I2C); } static void allwinner_h3_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void allwinner_h3_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->rtc), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, s->memmap[AW_H3_DEV_RTC]); + /* I2C */ + sysbus_realize(SYS_BUS_DEVICE(&s->i2c0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c0), 0, s->memmap[AW_H3_DEV_TWI0]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c0), 0, + qdev_get_gpio_in(DEVICE(&s->gic), AW_H3_GIC_SPI_TWI0)); + /* Unimplemented devices */ for (i = 0; i < ARRAY_SIZE(unimplemented); i++) { create_unimplemented_device(unimplemented[i].device_name, diff --git a/hw/i2c/allwinner-i2c.c b/hw/i2c/allwinner-i2c.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/i2c/allwinner-i2c.c @@ -XXX,XX +XXX,XX @@ +/* + * Allwinner I2C Bus Serial Interface Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * This file is derived from IMX I2C controller, + * by Jean-Christophe DUBOIS . + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "hw/i2c/allwinner-i2c.h" +#include "hw/irq.h" +#include "migration/vmstate.h" +#include "hw/i2c/i2c.h" +#include "qemu/log.h" +#include "trace.h" +#include "qemu/module.h" + +/* Allwinner I2C memory map */ +#define TWI_ADDR_REG 0x00 /* slave address register */ +#define TWI_XADDR_REG 0x04 /* extended slave address register */ +#define TWI_DATA_REG 0x08 /* data register */ +#define TWI_CNTR_REG 0x0c /* control register */ +#define TWI_STAT_REG 0x10 /* status register */ +#define TWI_CCR_REG 0x14 /* clock control register */ +#define TWI_SRST_REG 0x18 /* software reset register */ +#define TWI_EFR_REG 0x1c /* enhance feature register */ +#define TWI_LCR_REG 0x20 /* line control register */ + +/* Used only in slave mode, do not set */ +#define TWI_ADDR_RESET 0 +#define TWI_XADDR_RESET 0 + +/* Data register */ +#define TWI_DATA_MASK 0xFF +#define TWI_DATA_RESET 0 + +/* Control register */ +#define TWI_CNTR_INT_EN (1 << 7) +#define TWI_CNTR_BUS_EN (1 << 6) +#define TWI_CNTR_M_STA (1 << 5) +#define TWI_CNTR_M_STP (1 << 4) +#define TWI_CNTR_INT_FLAG (1 << 3) +#define TWI_CNTR_A_ACK (1 << 2) +#define TWI_CNTR_MASK 0xFC +#define TWI_CNTR_RESET 0 + +/* Status register */ +#define TWI_STAT_MASK 0xF8 +#define TWI_STAT_RESET 0xF8 + +/* Clock register */ +#define TWI_CCR_CLK_M_MASK 0x78 +#define TWI_CCR_CLK_N_MASK 0x07 +#define TWI_CCR_MASK 0x7F +#define TWI_CCR_RESET 0 + +/* Soft reset */ +#define TWI_SRST_MASK 0x01 +#define TWI_SRST_RESET 0 + +/* Enhance feature */ +#define TWI_EFR_MASK 0x03 +#define TWI_EFR_RESET 0 + +/* Line control */ +#define TWI_LCR_SCL_STATE (1 << 5) +#define TWI_LCR_SDA_STATE (1 << 4) +#define TWI_LCR_SCL_CTL (1 << 3) +#define TWI_LCR_SCL_CTL_EN (1 << 2) +#define TWI_LCR_SDA_CTL (1 << 1) +#define TWI_LCR_SDA_CTL_EN (1 << 0) +#define TWI_LCR_MASK 0x3F +#define TWI_LCR_RESET 0x3A + +/* Status value in STAT register is shifted by 3 bits */ +#define TWI_STAT_SHIFT 3 +#define STAT_FROM_STA(x) ((x) << TWI_STAT_SHIFT) +#define STAT_TO_STA(x) ((x) >> TWI_STAT_SHIFT) + +enum { + STAT_BUS_ERROR = 0, + /* Master mode */ + STAT_M_STA_TX, + STAT_M_RSTA_TX, + STAT_M_ADDR_WR_ACK, + STAT_M_ADDR_WR_NACK, + STAT_M_DATA_TX_ACK, + STAT_M_DATA_TX_NACK, + STAT_M_ARB_LOST, + STAT_M_ADDR_RD_ACK, + STAT_M_ADDR_RD_NACK, + STAT_M_DATA_RX_ACK, + STAT_M_DATA_RX_NACK, + /* Slave mode */ + STAT_S_ADDR_WR_ACK, + STAT_S_ARB_LOST_AW_ACK, + STAT_S_GCA_ACK, + STAT_S_ARB_LOST_GCA_ACK, + STAT_S_DATA_RX_SA_ACK, + STAT_S_DATA_RX_SA_NACK, + STAT_S_DATA_RX_GCA_ACK, + STAT_S_DATA_RX_GCA_NACK, + STAT_S_STP_RSTA, + STAT_S_ADDR_RD_ACK, + STAT_S_ARB_LOST_AR_ACK, + STAT_S_DATA_TX_ACK, + STAT_S_DATA_TX_NACK, + STAT_S_LB_TX_ACK, + /* Master mode, 10-bit */ + STAT_M_2ND_ADDR_WR_ACK, + STAT_M_2ND_ADDR_WR_NACK, + /* Idle */ + STAT_IDLE = 0x1f +} TWI_STAT_STA; + +static const char *allwinner_i2c_get_regname(unsigned offset) +{ + switch (offset) { + case TWI_ADDR_REG: + return "ADDR"; + case TWI_XADDR_REG: + return "XADDR"; + case TWI_DATA_REG: + return "DATA"; + case TWI_CNTR_REG: + return "CNTR"; + case TWI_STAT_REG: + return "STAT"; + case TWI_CCR_REG: + return "CCR"; + case TWI_SRST_REG: + return "SRST"; + case TWI_EFR_REG: + return "EFR"; + case TWI_LCR_REG: + return "LCR"; + default: + return "[?]"; + } +} + +static inline bool allwinner_i2c_is_reset(AWI2CState *s) +{ + return s->srst & TWI_SRST_MASK; +} + +static inline bool allwinner_i2c_bus_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_BUS_EN; +} + +static inline bool allwinner_i2c_interrupt_is_enabled(AWI2CState *s) +{ + return s->cntr & TWI_CNTR_INT_EN; +} + +static void allwinner_i2c_reset_hold(Object *obj) +{ + AWI2CState *s = AW_I2C(obj); + + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + i2c_end_transfer(s->bus); + } + + s->addr = TWI_ADDR_RESET; + s->xaddr = TWI_XADDR_RESET; + s->data = TWI_DATA_RESET; + s->cntr = TWI_CNTR_RESET; + s->stat = TWI_STAT_RESET; + s->ccr = TWI_CCR_RESET; + s->srst = TWI_SRST_RESET; + s->efr = TWI_EFR_RESET; + s->lcr = TWI_LCR_RESET; +} + +static inline void allwinner_i2c_raise_interrupt(AWI2CState *s) +{ + /* + * Raise an interrupt if the device is not reset and it is configured + * to generate some interrupts. + */ + if (!allwinner_i2c_is_reset(s) && allwinner_i2c_bus_is_enabled(s)) { + if (STAT_TO_STA(s->stat) != STAT_IDLE) { + s->cntr |= TWI_CNTR_INT_FLAG; + if (allwinner_i2c_interrupt_is_enabled(s)) { + qemu_irq_raise(s->irq); + } + } + } +} + +static uint64_t allwinner_i2c_read(void *opaque, hwaddr offset, + unsigned size) +{ + uint16_t value; + AWI2CState *s = AW_I2C(opaque); + + switch (offset) { + case TWI_ADDR_REG: + value = s->addr; + break; + case TWI_XADDR_REG: + value = s->xaddr; + break; + case TWI_DATA_REG: + if ((STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) || + (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK)) { + /* Get the next byte */ + s->data = i2c_recv(s->bus); + + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + value = s->data; + break; + case TWI_CNTR_REG: + value = s->cntr; + break; + case TWI_STAT_REG: + value = s->stat; + /* + * If polling when reading then change state to indicate data + * is available + */ + if (STAT_TO_STA(s->stat) == STAT_M_ADDR_RD_ACK) { + if (s->cntr & TWI_CNTR_A_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case TWI_CCR_REG: + value = s->ccr; + break; + case TWI_SRST_REG: + value = s->srst; + break; + case TWI_EFR_REG: + value = s->efr; + break; + case TWI_LCR_REG: + value = s->lcr; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + value = 0; + break; + } + + trace_allwinner_i2c_read(allwinner_i2c_get_regname(offset), offset, value); + + return (uint64_t)value; +} + +static void allwinner_i2c_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size) +{ + AWI2CState *s = AW_I2C(opaque); + + value &= 0xff; + + trace_allwinner_i2c_write(allwinner_i2c_get_regname(offset), offset, value); + + switch (offset) { + case TWI_ADDR_REG: + s->addr = (uint8_t)value; + break; + case TWI_XADDR_REG: + s->xaddr = (uint8_t)value; + break; + case TWI_DATA_REG: + /* If the device is in reset or not enabled, nothing to do */ + if (allwinner_i2c_is_reset(s) || (!allwinner_i2c_bus_is_enabled(s))) { + break; + } + + s->data = value & TWI_DATA_MASK; + + switch (STAT_TO_STA(s->stat)) { + case STAT_M_STA_TX: + case STAT_M_RSTA_TX: + /* Send address */ + if (i2c_start_transfer(s->bus, extract32(s->data, 1, 7), + extract32(s->data, 0, 1))) { + /* If non zero is returned, the address is not valid */ + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_NACK); + } else { + /* Determine if read of write */ + if (extract32(s->data, 0, 1)) { + s->stat = STAT_FROM_STA(STAT_M_ADDR_RD_ACK); + } else { + s->stat = STAT_FROM_STA(STAT_M_ADDR_WR_ACK); + } + allwinner_i2c_raise_interrupt(s); + } + break; + case STAT_M_ADDR_WR_ACK: + case STAT_M_DATA_TX_ACK: + if (i2c_send(s->bus, s->data)) { + /* If the target return non zero then end the transfer */ + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_NACK); + i2c_end_transfer(s->bus); + } else { + s->stat = STAT_FROM_STA(STAT_M_DATA_TX_ACK); + allwinner_i2c_raise_interrupt(s); + } + break; + default: + break; + } + break; + case TWI_CNTR_REG: + if (!allwinner_i2c_is_reset(s)) { + /* Do something only if not in software reset */ + s->cntr = value & TWI_CNTR_MASK; + + /* Check if start condition should be sent */ + if (s->cntr & TWI_CNTR_M_STA) { + /* Update status */ + if (STAT_TO_STA(s->stat) == STAT_IDLE) { + /* Send start condition */ + s->stat = STAT_FROM_STA(STAT_M_STA_TX); + } else { + /* Send repeated start condition */ + s->stat = STAT_FROM_STA(STAT_M_RSTA_TX); + } + /* Clear start condition */ + s->cntr &= ~TWI_CNTR_M_STA; + } + if (s->cntr & TWI_CNTR_M_STP) { + /* Update status */ + i2c_end_transfer(s->bus); + s->stat = STAT_FROM_STA(STAT_IDLE); + s->cntr &= ~TWI_CNTR_M_STP; + } + if ((s->cntr & TWI_CNTR_INT_FLAG) == 0) { + /* Interrupt flag cleared */ + qemu_irq_lower(s->irq); + } + if ((s->cntr & TWI_CNTR_A_ACK) == 0) { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_ACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_NACK); + } + } else { + if (STAT_TO_STA(s->stat) == STAT_M_DATA_RX_NACK) { + s->stat = STAT_FROM_STA(STAT_M_DATA_RX_ACK); + } + } + allwinner_i2c_raise_interrupt(s); + + } + break; + case TWI_CCR_REG: + s->ccr = value & TWI_CCR_MASK; + break; + case TWI_SRST_REG: + if (((value & TWI_SRST_MASK) == 0) && (s->srst & TWI_SRST_MASK)) { + /* Perform reset */ + allwinner_i2c_reset_hold(OBJECT(s)); + } + s->srst = value & TWI_SRST_MASK; + break; + case TWI_EFR_REG: + s->efr = value & TWI_EFR_MASK; + break; + case TWI_LCR_REG: + s->lcr = value & TWI_LCR_MASK; + break; + default: + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad address at offset 0x%" + HWADDR_PRIx "\n", TYPE_AW_I2C, __func__, offset); + break; + } +} + +static const MemoryRegionOps allwinner_i2c_ops = { + .read = allwinner_i2c_read, + .write = allwinner_i2c_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription allwinner_i2c_vmstate = { + .name = TYPE_AW_I2C, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8(addr, AWI2CState), + VMSTATE_UINT8(xaddr, AWI2CState), + VMSTATE_UINT8(data, AWI2CState), + VMSTATE_UINT8(cntr, AWI2CState), + VMSTATE_UINT8(ccr, AWI2CState), + VMSTATE_UINT8(srst, AWI2CState), + VMSTATE_UINT8(efr, AWI2CState), + VMSTATE_UINT8(lcr, AWI2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void allwinner_i2c_realize(DeviceState *dev, Error **errp) +{ + AWI2CState *s = AW_I2C(dev); + + memory_region_init_io(&s->iomem, OBJECT(s), &allwinner_i2c_ops, s, + TYPE_AW_I2C, AW_I2C_MEM_SIZE); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); + sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq); + s->bus = i2c_init_bus(dev, "i2c"); +} + +static void allwinner_i2c_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + rc->phases.hold = allwinner_i2c_reset_hold; + dc->vmsd = &allwinner_i2c_vmstate; + dc->realize = allwinner_i2c_realize; + dc->desc = "Allwinner I2C Controller"; +} + +static const TypeInfo allwinner_i2c_type_info = { + .name = TYPE_AW_I2C, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AWI2CState), + .class_init = allwinner_i2c_class_init, +}; + +static void allwinner_i2c_register_types(void) +{ + type_register_static(&allwinner_i2c_type_info); +} + +type_init(allwinner_i2c_register_types) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_CCM select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC + select ALLWINNER_I2C select SERIAL select UNIMP @@ -XXX,XX +XXX,XX @@ config ALLWINNER_H3 bool select ALLWINNER_A10_PIT select ALLWINNER_SUN8I_EMAC + select ALLWINNER_I2C select SERIAL select ARM_TIMER select ARM_GIC diff --git a/hw/i2c/Kconfig b/hw/i2c/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/Kconfig +++ b/hw/i2c/Kconfig @@ -XXX,XX +XXX,XX @@ config MPC_I2C bool select I2C +config ALLWINNER_I2C + bool + select I2C + config PCA954X bool select I2C diff --git a/hw/i2c/meson.build b/hw/i2c/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/meson.build +++ b/hw/i2c/meson.build @@ -XXX,XX +XXX,XX @@ i2c_ss.add(when: 'CONFIG_BITBANG_I2C', if_true: files('bitbang_i2c.c')) i2c_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210_i2c.c')) i2c_ss.add(when: 'CONFIG_IMX_I2C', if_true: files('imx_i2c.c')) i2c_ss.add(when: 'CONFIG_MPC_I2C', if_true: files('mpc_i2c.c')) +i2c_ss.add(when: 'CONFIG_ALLWINNER_I2C', if_true: files('allwinner-i2c.c')) i2c_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('microbit_i2c.c')) i2c_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx_smbus.c')) i2c_ss.add(when: 'CONFIG_SMBUS_EEPROM', if_true: files('smbus_eeprom.c')) diff --git a/hw/i2c/trace-events b/hw/i2c/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/i2c/trace-events +++ b/hw/i2c/trace-events @@ -XXX,XX +XXX,XX @@ i2c_send_async(uint8_t address, uint8_t data) "send_async(addr:0x%02x) data:0x%0 i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x" i2c_ack(void) "" +# allwinner_i2c.c + +allwinner_i2c_read(const char* reg_name, uint64_t offset, uint64_t value) "read %s [0x%" PRIx64 "]: -> 0x%" PRIx64 +allwinner_i2c_write(const char* reg_name, uint64_t offset, uint64_t value) "write %s [0x%" PRIx64 "]: <- 0x%" PRIx64 + # aspeed_i2c.c aspeed_i2c_bus_cmd(uint32_t cmd, const char *cmd_flags, uint32_t count, uint32_t intr_status) "handling cmd=0x%x %s count=%d intr=0x%x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch adds minimal support for AXP-209 PMU. Most important is chip ID since U-Boot SPL expects version 0x1. Besides the chip ID register, reset values for two more registers used by A10 U-Boot SPL are covered. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Message-id: 20221226220303.14420-5-strahinja.p.jankovic@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/axp209.c | 238 +++++++++++++++++++++++++++++++++++++++++++ MAINTAINERS | 2 + hw/misc/Kconfig | 4 + hw/misc/meson.build | 1 + hw/misc/trace-events | 5 + 5 files changed, 250 insertions(+) create mode 100644 hw/misc/axp209.c diff --git a/hw/misc/axp209.c b/hw/misc/axp209.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/axp209.c @@ -XXX,XX +XXX,XX @@ +/* + * AXP-209 PMU Emulation + * + * Copyright (C) 2022 Strahinja Jankovic <strahinja.p.jankovic@gmail.com> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * SPDX-License-Identifier: MIT + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "trace.h" +#include "hw/i2c/i2c.h" +#include "migration/vmstate.h" + +#define TYPE_AXP209_PMU "axp209_pmu" + +#define AXP209(obj) \ + OBJECT_CHECK(AXP209I2CState, (obj), TYPE_AXP209_PMU) + +/* registers */ +enum { + REG_POWER_STATUS = 0x0u, + REG_OPERATING_MODE, + REG_OTG_VBUS_STATUS, + REG_CHIP_VERSION, + REG_DATA_CACHE_0, + REG_DATA_CACHE_1, + REG_DATA_CACHE_2, + REG_DATA_CACHE_3, + REG_DATA_CACHE_4, + REG_DATA_CACHE_5, + REG_DATA_CACHE_6, + REG_DATA_CACHE_7, + REG_DATA_CACHE_8, + REG_DATA_CACHE_9, + REG_DATA_CACHE_A, + REG_DATA_CACHE_B, + REG_POWER_OUTPUT_CTRL = 0x12u, + REG_DC_DC2_OUT_V_CTRL = 0x23u, + REG_DC_DC2_DVS_CTRL = 0x25u, + REG_DC_DC3_OUT_V_CTRL = 0x27u, + REG_LDO2_4_OUT_V_CTRL, + REG_LDO3_OUT_V_CTRL, + REG_VBUS_CH_MGMT = 0x30u, + REG_SHUTDOWN_V_CTRL, + REG_SHUTDOWN_CTRL, + REG_CHARGE_CTRL_1, + REG_CHARGE_CTRL_2, + REG_SPARE_CHARGE_CTRL, + REG_PEK_KEY_CTRL, + REG_DC_DC_FREQ_SET, + REG_CHR_TEMP_TH_SET, + REG_CHR_HIGH_TEMP_TH_CTRL, + REG_IPSOUT_WARN_L1, + REG_IPSOUT_WARN_L2, + REG_DISCHR_TEMP_TH_SET, + REG_DISCHR_HIGH_TEMP_TH_CTRL, + REG_IRQ_BANK_1_CTRL = 0x40u, + REG_IRQ_BANK_2_CTRL, + REG_IRQ_BANK_3_CTRL, + REG_IRQ_BANK_4_CTRL, + REG_IRQ_BANK_5_CTRL, + REG_IRQ_BANK_1_STAT = 0x48u, + REG_IRQ_BANK_2_STAT, + REG_IRQ_BANK_3_STAT, + REG_IRQ_BANK_4_STAT, + REG_IRQ_BANK_5_STAT, + REG_ADC_ACIN_V_H = 0x56u, + REG_ADC_ACIN_V_L, + REG_ADC_ACIN_CURR_H, + REG_ADC_ACIN_CURR_L, + REG_ADC_VBUS_V_H, + REG_ADC_VBUS_V_L, + REG_ADC_VBUS_CURR_H, + REG_ADC_VBUS_CURR_L, + REG_ADC_INT_TEMP_H, + REG_ADC_INT_TEMP_L, + REG_ADC_TEMP_SENS_V_H = 0x62u, + REG_ADC_TEMP_SENS_V_L, + REG_ADC_BAT_V_H = 0x78u, + REG_ADC_BAT_V_L, + REG_ADC_BAT_DISCHR_CURR_H, + REG_ADC_BAT_DISCHR_CURR_L, + REG_ADC_BAT_CHR_CURR_H, + REG_ADC_BAT_CHR_CURR_L, + REG_ADC_IPSOUT_V_H, + REG_ADC_IPSOUT_V_L, + REG_DC_DC_MOD_SEL = 0x80u, + REG_ADC_EN_1, + REG_ADC_EN_2, + REG_ADC_SR_CTRL, + REG_ADC_IN_RANGE, + REG_GPIO1_ADC_IRQ_RISING_TH, + REG_GPIO1_ADC_IRQ_FALLING_TH, + REG_TIMER_CTRL = 0x8au, + REG_VBUS_CTRL_MON_SRP, + REG_OVER_TEMP_SHUTDOWN = 0x8fu, + REG_GPIO0_FEAT_SET, + REG_GPIO_OUT_HIGH_SET, + REG_GPIO1_FEAT_SET, + REG_GPIO2_FEAT_SET, + REG_GPIO_SIG_STATE_SET_MON, + REG_GPIO3_SET, + REG_COULOMB_CNTR_CTRL = 0xb8u, + REG_POWER_MEAS_RES, + NR_REGS +}; + +#define AXP209_CHIP_VERSION_ID (0x01) +#define AXP209_DC_DC2_OUT_V_CTRL_RESET (0x16) +#define AXP209_IRQ_BANK_1_CTRL_RESET (0xd8) + +/* A simple I2C slave which returns values of ID or CNT register. */ +typedef struct AXP209I2CState { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + uint8_t regs[NR_REGS]; /* peripheral registers */ + uint8_t ptr; /* current register index */ + uint8_t count; /* counter used for tx/rx */ +} AXP209I2CState; + +/* Reset all counters and load ID register */ +static void axp209_reset_enter(Object *obj, ResetType type) +{ + AXP209I2CState *s = AXP209(obj); + + memset(s->regs, 0, NR_REGS); + s->ptr = 0; + s->count = 0; + s->regs[REG_CHIP_VERSION] = AXP209_CHIP_VERSION_ID; + s->regs[REG_DC_DC2_OUT_V_CTRL] = AXP209_DC_DC2_OUT_V_CTRL_RESET; + s->regs[REG_IRQ_BANK_1_CTRL] = AXP209_IRQ_BANK_1_CTRL_RESET; +} + +/* Handle events from master. */ +static int axp209_event(I2CSlave *i2c, enum i2c_event event) +{ + AXP209I2CState *s = AXP209(i2c); + + s->count = 0; + + return 0; +} + +/* Called when master requests read */ +static uint8_t axp209_rx(I2CSlave *i2c) +{ + AXP209I2CState *s = AXP209(i2c); + uint8_t ret = 0xff; + + if (s->ptr < NR_REGS) { + ret = s->regs[s->ptr++]; + } + + trace_axp209_rx(s->ptr - 1, ret); + + return ret; +} + +/* + * Called when master sends write. + * Update ptr with byte 0, then perform write with second byte. + */ +static int axp209_tx(I2CSlave *i2c, uint8_t data) +{ + AXP209I2CState *s = AXP209(i2c); + + if (s->count == 0) { + /* Store register address */ + s->ptr = data; + s->count++; + trace_axp209_select(data); + } else { + trace_axp209_tx(s->ptr, data); + if (s->ptr == REG_DC_DC2_OUT_V_CTRL) { + s->regs[s->ptr++] = data; + } + } + + return 0; +} + +static const VMStateDescription vmstate_axp209 = { + .name = TYPE_AXP209_PMU, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT8_ARRAY(regs, AXP209I2CState, NR_REGS), + VMSTATE_UINT8(count, AXP209I2CState), + VMSTATE_UINT8(ptr, AXP209I2CState), + VMSTATE_END_OF_LIST() + } +}; + +static void axp209_class_init(ObjectClass *oc, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(oc); + I2CSlaveClass *isc = I2C_SLAVE_CLASS(oc); + ResettableClass *rc = RESETTABLE_CLASS(oc); + + rc->phases.enter = axp209_reset_enter; + dc->vmsd = &vmstate_axp209; + isc->event = axp209_event; + isc->recv = axp209_rx; + isc->send = axp209_tx; +} + +static const TypeInfo axp209_info = { + .name = TYPE_AXP209_PMU, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(AXP209I2CState), + .class_init = axp209_class_init +}; + +static void axp209_register_devices(void) +{ + type_register_static(&axp209_info); +} + +type_init(axp209_register_devices); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ ARM Machines Allwinner-a10 M: Beniamino Galvani <b.galvani@gmail.com> M: Peter Maydell <peter.maydell@linaro.org> +R: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/*/allwinner* F: include/hw/*/allwinner* F: hw/arm/cubieboard.c F: docs/system/arm/cubieboard.rst +F: hw/misc/axp209.c Allwinner-h3 M: Niek Linnenbank <nieklinnenbank@gmail.com> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10_CCM config ALLWINNER_A10_DRAMC bool +config AXP209_PMU + bool + depends on I2C + source macio/Kconfig diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ specific_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-cpucfg.c' softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-dramc.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3-sysctrl.c')) softmmu_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-sid.c')) +softmmu_ss.add(when: 'CONFIG_AXP209_PMU', if_true: files('axp209.c')) softmmu_ss.add(when: 'CONFIG_REALVIEW', if_true: files('arm_sysctl.c')) softmmu_ss.add(when: 'CONFIG_NSERIES', if_true: files('cbus.c')) softmmu_ss.add(when: 'CONFIG_ECCMEMCTL', if_true: files('eccmemctl.c')) diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ allwinner_sid_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" avr_power_read(uint8_t value) "power_reduc read value:%u" avr_power_write(uint8_t value) "power_reduc write value:%u" +# axp209.c +axp209_rx(uint8_t reg, uint8_t data) "Read reg 0x%" PRIx8 " : 0x%" PRIx8 +axp209_select(uint8_t reg) "Accessing reg 0x%" PRIx8 +axp209_tx(uint8_t reg, uint8_t data) "Write reg 0x%" PRIx8 " : 0x%" PRIx8 + # eccmemctl.c ecc_mem_writel_mer(uint32_t val) "Write memory enable 0x%08x" ecc_mem_writel_mdr(uint32_t val) "Write memory delay 0x%08x" -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> SPL Boot for Cubieboard expects AXP209 connected to I2C0 bus. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20221226220303.14420-6-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/cubieboard.c | 6 ++++++ hw/arm/Kconfig | 1 + 2 files changed, 7 insertions(+) diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/qdev-properties.h" #include "hw/arm/allwinner-a10.h" +#include "hw/i2c/i2c.h" static struct arm_boot_info cubieboard_binfo = { .loader_start = AW_A10_SDRAM_BASE, @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) BlockBackend *blk; BusState *bus; DeviceState *carddev; + I2CBus *i2c; /* BIOS is not supported by this board */ if (machine->firmware) { @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) exit(1); } + /* Connect AXP 209 */ + i2c = I2C_BUS(qdev_get_child_bus(DEVICE(&a10->i2c0), "i2c")); + i2c_slave_create_simple(i2c, "axp209_pmu", 0x34); + /* Retrieve SD bus */ di = drive_get(IF_SD, 0, 0); blk = di ? blk_by_legacy_dinfo(di) : NULL; diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ALLWINNER_A10 select ALLWINNER_A10_DRAMC select ALLWINNER_EMAC select ALLWINNER_I2C + select AXP209_PMU select SERIAL select UNIMP -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> This patch enables copying of SPL from MMC if `-kernel` parameter is not passed when starting QEMU. SPL is copied to SRAM_A. The approach is reused from Allwinner H3 implementation. Tested with Armbian and custom Yocto image. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-7-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/allwinner-a10.h | 21 +++++++++++++++++++++ hw/arm/allwinner-a10.c | 18 ++++++++++++++++++ hw/arm/cubieboard.c | 5 +++++ 3 files changed, 44 insertions(+) diff --git a/include/hw/arm/allwinner-a10.h b/include/hw/arm/allwinner-a10.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/allwinner-a10.h +++ b/include/hw/arm/allwinner-a10.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/allwinner-a10-ccm.h" #include "hw/misc/allwinner-a10-dramc.h" #include "hw/i2c/allwinner-i2c.h" +#include "sysemu/block-backend.h" #include "target/arm/cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct AwA10State { OHCISysBusState ohci[AW_A10_NUM_USB]; }; +/** + * Emulate Boot ROM firmware setup functionality. + * + * A real Allwinner A10 SoC contains a Boot ROM + * which is the first code that runs right after + * the SoC is powered on. The Boot ROM is responsible + * for loading user code (e.g. a bootloader) from any + * of the supported external devices and writing the + * downloaded code to internal SRAM. After loading the SoC + * begins executing the code written to SRAM. + * + * This function emulates the Boot ROM by copying 32 KiB + * of data at offset 8 KiB from the given block device and writes it to + * the start of the first internal SRAM memory. + * + * @s: Allwinner A10 state object pointer + * @blk: Block backend device object pointer + */ +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk); + #endif diff --git a/hw/arm/allwinner-a10.c b/hw/arm/allwinner-a10.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/allwinner-a10.c +++ b/hw/arm/allwinner-a10.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "hw/boards.h" #include "hw/usb/hcd-ohci.h" +#include "hw/loader.h" +#define AW_A10_SRAM_A_BASE 0x00000000 #define AW_A10_DRAMC_BASE 0x01c01000 #define AW_A10_MMC0_BASE 0x01c0f000 #define AW_A10_CCM_BASE 0x01c20000 @@ -XXX,XX +XXX,XX @@ #define AW_A10_RTC_BASE 0x01c20d00 #define AW_A10_I2C0_BASE 0x01c2ac00 +void allwinner_a10_bootrom_setup(AwA10State *s, BlockBackend *blk) +{ + const int64_t rom_size = 32 * KiB; + g_autofree uint8_t *buffer = g_new0(uint8_t, rom_size); + + if (blk_pread(blk, 8 * KiB, rom_size, buffer, 0) < 0) { + error_setg(&error_fatal, "%s: failed to read BlockBackend data", + __func__); + return; + } + + rom_add_blob("allwinner-a10.bootrom", buffer, rom_size, + rom_size, AW_A10_SRAM_A_BASE, + NULL, NULL, NULL, NULL, false); +} + static void aw_a10_init(Object *obj) { AwA10State *s = AW_A10(obj); diff --git a/hw/arm/cubieboard.c b/hw/arm/cubieboard.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/cubieboard.c +++ b/hw/arm/cubieboard.c @@ -XXX,XX +XXX,XX @@ static void cubieboard_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), AW_A10_SDRAM_BASE, machine->ram); + /* Load target kernel or start using BootROM */ + if (!machine->kernel_filename && blk && blk_is_available(blk)) { + /* Use Boot ROM to copy data from SD card to SRAM */ + allwinner_a10_bootrom_setup(a10, blk); + } /* TODO create and connect IDE devices for ide_drive_get() */ cubieboard_binfo.ram_size = machine->ram_size; -- 2.34.1 From: Strahinja Jankovic <strahinjapjankovic@gmail.com> Cubieboard now can boot directly from SD card, without the need to pass `-kernel` parameter. Update Avocado tests to cover this functionality. Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20221226220303.14420-8-strahinja.p.jankovic@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/avocado/boot_linux_console.py | 47 +++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/tests/avocado/boot_linux_console.py b/tests/avocado/boot_linux_console.py index XXXXXXX..XXXXXXX 100644 --- a/tests/avocado/boot_linux_console.py +++ b/tests/avocado/boot_linux_console.py @@ -XXX,XX +XXX,XX @@ def test_arm_cubieboard_sata(self): 'sda') # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_ALLOW_LARGE_STORAGE'), 'storage limited') + def test_arm_cubieboard_openwrt_22_03_2(self): + """ + :avocado: tags=arch:arm + :avocado: tags=machine:cubieboard + :avocado: tags=device:sd + """ + + # This test download a 7.5 MiB compressed image and expand it + # to 126 MiB. + image_url = ('https://downloads.openwrt.org/releases/22.03.2/targets/' + 'sunxi/cortexa8/openwrt-22.03.2-sunxi-cortexa8-' + 'cubietech_a10-cubieboard-ext4-sdcard.img.gz') + image_hash = ('94b5ecbfbc0b3b56276e5146b899eafa' + '2ac5dc2d08733d6705af9f144f39f554') + image_path_gz = self.fetch_asset(image_url, asset_hash=image_hash, + algorithm='sha256') + image_path = archive.extract(image_path_gz, self.workdir) + image_pow2ceil_expand(image_path) + + self.vm.set_console() + self.vm.add_args('-drive', 'file=' + image_path + ',if=sd,format=raw', + '-nic', 'user', + '-no-reboot') + self.vm.launch() + + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE + + 'usbcore.nousb ' + 'noreboot') + + self.wait_for_console_pattern('U-Boot SPL') + + interrupt_interactive_console_until_pattern( + self, 'Hit any key to stop autoboot:', '=>') + exec_command_and_wait_for_pattern(self, "setenv extraargs '" + + kernel_command_line + "'", '=>') + exec_command_and_wait_for_pattern(self, 'boot', 'Starting kernel ...'); + + self.wait_for_console_pattern( + 'Please press Enter to activate this console.') + + exec_command_and_wait_for_pattern(self, ' ', 'root@') + + exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo', + 'Allwinner sun4i/sun5i') + # cubieboard's reboot is not functioning; omit reboot test. + @skipUnless(os.getenv('AVOCADO_TIMEOUT_EXPECTED'), 'Test might timeout') def test_arm_quanta_gsj(self): """ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Don't dereference CPUTLBEntryFull until we verify that the page is valid. Move the other user-only info field updates after the valid check to match. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1412 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230104190056.305143-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/sve_helper.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/sve_helper.c +++ b/target/arm/sve_helper.c @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, #ifdef CONFIG_USER_ONLY flags = probe_access_flags(env, addr, access_type, mmu_idx, nofault, &info->host, retaddr); - memset(&info->attrs, 0, sizeof(info->attrs)); - /* Require both ANON and MTE; see allocation_tag_mem(). */ - info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); #else CPUTLBEntryFull *full; flags = probe_access_full(env, addr, access_type, mmu_idx, nofault, &info->host, &full, retaddr); - info->attrs = full->attrs; - info->tagged = full->pte_attrs == 0xf0; #endif info->flags = flags; @@ -XXX,XX +XXX,XX @@ bool sve_probe_page(SVEHostPage *info, bool nofault, CPUARMState *env, return false; } +#ifdef CONFIG_USER_ONLY + memset(&info->attrs, 0, sizeof(info->attrs)); + /* Require both ANON and MTE; see allocation_tag_mem(). */ + info->tagged = (flags & PAGE_ANON) && (flags & PAGE_MTE); +#else + info->attrs = full->attrs; + info->tagged = full->pte_attrs == 0xf0; +#endif + /* Ensure that info->host[] is relative to addr, not addr + mem_off. */ info->host -= mem_off; return true; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa255_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 2 +- hw/arm/gumstix.c | 3 +-- hw/arm/pxa2xx.c | 4 +++- hw/arm/tosa.c | 2 +- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, const char *revision); -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size); +PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t connex_rom = 0x01000000; uint32_t connex_ram = 0x04000000; - cpu = pxa255_init(address_space_mem, connex_ram); + cpu = pxa255_init(connex_ram); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ #include "qemu/error-report.h" #include "qemu/module.h" #include "qapi/error.h" +#include "exec/address-spaces.h" #include "cpu.h" #include "hw/sysbus.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ PXA2xxState *pxa270_init(MemoryRegion *address_space, } /* Initialise a PXA255 integrated chip (ARM based core). */ -PXA2xxState *pxa255_init(MemoryRegion *address_space, unsigned int sdram_size) +PXA2xxState *pxa255_init(unsigned int sdram_size) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/tosa.c +++ b/hw/arm/tosa.c @@ -XXX,XX +XXX,XX @@ static void tosa_init(MachineState *machine) TC6393xbState *tmio; DeviceState *scp0, *scp1; - mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size); + mpu = pxa255_init(tosa_binfo.ram_size); memory_region_init_rom(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal); memory_region_add_subregion(address_space_mem, 0, rom); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since pxa270_init() must map the device in the system memory, there is no point in passing get_system_memory() by argument. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 3 +-- hw/arm/gumstix.c | 3 +-- hw/arm/mainstone.c | 10 ++++------ hw/arm/pxa2xx.c | 4 ++-- hw/arm/spitz.c | 6 ++---- hw/arm/z2.c | 3 +-- 6 files changed, 11 insertions(+), 18 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { # define PA_FMT "0x%08lx" -PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, - const char *revision); +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *revision); PXA2xxState *pxa255_init(unsigned int sdram_size); #endif /* PXA_H */ diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - MemoryRegion *address_space_mem = get_system_memory(); uint32_t verdex_rom = 0x02000000; uint32_t verdex_ram = 0x10000000; - cpu = pxa270_init(address_space_mem, verdex_ram, machine->cpu_type); + cpu = pxa270_init(verdex_ram, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info mainstone_binfo = { .ram_size = 0x04000000, }; -static void mainstone_common_init(MemoryRegion *address_space_mem, - MachineState *machine, +static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { uint32_t sector_len = 256 * 1024; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0x00000000, rom); /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MemoryRegion *address_space_mem, static void mainstone_init(MachineState *machine) { - mainstone_common_init(get_system_memory(), machine, mainstone, 0x196); + mainstone_common_init(machine, mainstone, 0x196); } static void mainstone2_machine_init(MachineClass *mc) diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx.c +++ b/hw/arm/pxa2xx.c @@ -XXX,XX +XXX,XX @@ static void pxa2xx_reset(void *opaque, int line, int level) } /* Initialise a PXA270 integrated chip (ARM based core). */ -PXA2xxState *pxa270_init(MemoryRegion *address_space, - unsigned int sdram_size, const char *cpu_type) +PXA2xxState *pxa270_init(unsigned int sdram_size, const char *cpu_type) { + MemoryRegion *address_space = get_system_memory(); PXA2xxState *s; int i; DriveInfo *dinfo; diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; - MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, - machine->cpu_type); + mpu = pxa270_init(spitz_binfo.ram_size, machine->cpu_type); sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); memory_region_init_rom(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); - memory_region_add_subregion(address_space_mem, 0, rom); + memory_region_add_subregion(get_system_memory(), 0, rom); /* Setup peripherals */ spitz_keyboard_register(mpu); diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { static void z2_init(MachineState *machine) { - MemoryRegion *address_space_mem = get_system_memory(); uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) DeviceState *wm; /* Setup CPU & memory */ - mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, machine->cpu_type); + mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #include "qom/object.h" +#define RAM_SIZE (512 * MiB) +#define FLASH_SIZE (32 * MiB) +#define FLASH_SECTOR_SIZE (64 * KiB) + struct CollieMachineState { MachineState parent; @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CollieMachineState, COLLIE_MACHINE) static struct arm_boot_info collie_binfo = { .loader_start = SA_SDCS0, - .ram_size = 0x20000000, + .ram_size = RAM_SIZE, }; static void collie_init(MachineState *machine) @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", 0x02000000, + pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", 0x02000000, + pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - 64 * KiB, 4, 0x00, 0x00, 0x00, 0x00, 0); + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); sysbus_create_simple("scoop", 0x40800000, NULL); @@ -XXX,XX +XXX,XX @@ static void collie_machine_class_init(ObjectClass *oc, void *data) mc->init = collie_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("sa1110"); - mc->default_ram_size = 0x20000000; + mc->default_ram_size = RAM_SIZE; mc->default_ram_id = "strongarm.sdram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/collie.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/hw/arm/collie.c b/hw/arm/collie.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/collie.c +++ b/hw/arm/collie.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info collie_binfo = { static void collie_init(MachineState *machine) { - DriveInfo *dinfo; MachineClass *mc = MACHINE_GET_CLASS(machine); CollieMachineState *cms = COLLIE_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void collie_init(MachineState *machine) memory_region_add_subregion(get_system_memory(), SA_SDCS0, machine->ram); - dinfo = drive_get(IF_PFLASH, 0, 0); - pflash_cfi01_register(SA_CS0, "collie.fl1", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); - - dinfo = drive_get(IF_PFLASH, 0, 1); - pflash_cfi01_register(SA_CS1, "collie.fl2", FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + for (unsigned i = 0; i < 2; i++) { + DriveInfo *dinfo = drive_get(IF_PFLASH, 0, i); + pflash_cfi01_register(i ? SA_CS1 : SA_CS0, + i ? "collie.fl2" : "collie.fl1", FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0x00, 0x00, 0x00, 0x00, 0); + } sysbus_create_simple("scoop", 0x40800000, NULL); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Add a comment describing the Connex uses a Numonyx RC28F128J3F75 flash, and the Verdex uses a Micron RC28F256P30TFA. Correct the Verdex machine description (we model the 'Pro' board). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-6-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ * Contributions after 2012-01-13 are licensed under the terms of the * GNU GPL, version 2 or (at your option) any later version. */ - + /* * Example usage: * @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) exit(1); } + /* Numonyx RC28F128J3F75 */ if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) exit(1); } + /* Micron RC28F256P30TFA */ if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, sector_len, 2, 0, 0, 0, 0, 0)) { @@ -XXX,XX +XXX,XX @@ static void verdex_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); - mc->desc = "Gumstix Verdex (PXA270)"; + mc->desc = "Gumstix Verdex Pro XL6P COMs (PXA270)"; mc->init = verdex_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); -- 2.34.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> IEC binary prefixes ease code review: the unit is explicit. Add definitions for RAM / Flash / Flash blocksize. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-7-philmd@linaro.org Message-Id: <20200223231044.8003-3-philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "hw/arm/pxa.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "cpu.h" -static const int sector_len = 128 * 1024; +#define CONNEX_FLASH_SIZE (16 * MiB) +#define CONNEX_RAM_SIZE (64 * MiB) + +#define VERDEX_FLASH_SIZE (32 * MiB) +#define VERDEX_RAM_SIZE (256 * MiB) + +#define FLASH_SECTOR_SIZE (128 * KiB) static void connex_init(MachineState *machine) { PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t connex_rom = 0x01000000; - uint32_t connex_ram = 0x04000000; - - cpu = pxa255_init(connex_ram); + cpu = pxa255_init(CONNEX_RAM_SIZE); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", connex_rom, + if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) PXA2xxState *cpu; DriveInfo *dinfo; - uint32_t verdex_rom = 0x02000000; - uint32_t verdex_ram = 0x10000000; - - cpu = pxa270_init(verdex_ram, machine->cpu_type); + cpu = pxa270_init(VERDEX_RAM_SIZE, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); if (!dinfo && !qtest_enabled()) { @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", verdex_rom, + if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 2, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mainstone.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ * GNU GPL, version 2 or (at your option) any later version. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/error-report.h" #include "qapi/error.h" #include "hw/arm/pxa.h" @@ -XXX,XX +XXX,XX @@ static const struct keymap map[0xE0] = { enum mainstone_model_e { mainstone }; -#define MAINSTONE_RAM 0x04000000 -#define MAINSTONE_ROM 0x00800000 -#define MAINSTONE_FLASH 0x02000000 +#define MAINSTONE_RAM_SIZE (64 * MiB) +#define MAINSTONE_ROM_SIZE (8 * MiB) +#define MAINSTONE_FLASH_SIZE (32 * MiB) static struct arm_boot_info mainstone_binfo = { .loader_start = PXA2XX_SDRAM_BASE, - .ram_size = 0x04000000, + .ram_size = MAINSTONE_RAM_SIZE, }; +#define FLASH_SECTOR_SIZE (256 * KiB) + static void mainstone_common_init(MachineState *machine, enum mainstone_model_e model, int arm_id) { - uint32_t sector_len = 256 * 1024; hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 }; PXA2xxState *mpu; DeviceState *mst_irq; @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* Setup CPU & memory */ mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type); - memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM, + memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM_SIZE, &error_fatal); memory_region_add_subregion(get_system_memory(), 0x00000000, rom); @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, dinfo = drive_get(IF_PFLASH, 0, i); if (!pflash_cfi01_register(mainstone_flash_base[i], i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH, + MAINSTONE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/musicpal.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "cpu.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo musicpal_key_info = { .class_init = musicpal_key_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static struct arm_boot_info musicpal_binfo = { .loader_start = 0x0, .board_id = 0x20e, @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) BlockBackend *blk = blk_by_legacy_dinfo(dinfo); flash_size = blk_getlength(blk); - if (flash_size != 8*1024*1024 && flash_size != 16*1024*1024 && - flash_size != 32*1024*1024) { + if (flash_size != 8 * MiB && flash_size != 16 * MiB && + flash_size != 32 * MiB) { error_report("Invalid flash image size"); exit(1); } @@ -XXX,XX +XXX,XX @@ static void musicpal_init(MachineState *machine) */ pflash_cfi02_register(0x100000000ULL - MP_FLASH_SIZE_MAX, "musicpal.flash", flash_size, - blk, 0x10000, + blk, FLASH_SECTOR_SIZE, MP_FLASH_SIZE_MAX / flash_size, 2, 0x00BF, 0x236D, 0x0000, 0x0000, 0x5555, 0x2AAA, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The total_ram_v1/total_ram_v2 definitions were never used. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { #define flash0_size (16 * 1024 * 1024) #define flash1_size ( 8 * 1024 * 1024) #define flash2_size (32 * 1024 * 1024) -#define total_ram_v1 (sdram_size + flash0_size + flash1_size + OMAP15XX_SRAM_SIZE) -#define total_ram_v2 (sdram_size + flash2_size + OMAP15XX_SRAM_SIZE) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap_sx1.c | 33 +++++++++++++++++---------------- 1 file changed, 17 insertions(+), 16 deletions(-) diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ * with this program; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qapi/error.h" #include "ui/console.h" #include "hw/arm/omap.h" @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps static_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -#define sdram_size 0x02000000 -#define sector_size (128 * 1024) -#define flash0_size (16 * 1024 * 1024) -#define flash1_size ( 8 * 1024 * 1024) -#define flash2_size (32 * 1024 * 1024) +#define SDRAM_SIZE (32 * MiB) +#define SECTOR_SIZE (128 * KiB) +#define FLASH0_SIZE (16 * MiB) +#define FLASH1_SIZE (8 * MiB) +#define FLASH2_SIZE (32 * MiB) static struct arm_boot_info sx1_binfo = { .loader_start = OMAP_EMIFF_BASE, - .ram_size = sdram_size, + .ram_size = SDRAM_SIZE, .board_id = 0x265, }; @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) static uint32_t cs3val = 0x00001139; DriveInfo *dinfo; int fl_idx; - uint32_t flash_size = flash0_size; + uint32_t flash_size = FLASH0_SIZE; if (machine->ram_size != mc->default_ram_size) { char *sz = size_to_str(mc->default_ram_size); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) } if (version == 2) { - flash_size = flash2_size; + flash_size = FLASH2_SIZE; } memory_region_add_subregion(address_space, OMAP_EMIFF_BASE, machine->ram); @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) if (!pflash_cfi01_register(OMAP_CS0_BASE, "omap_sx1.flash0-1", flash_size, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) (dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { MemoryRegion *flash_1 = g_new(MemoryRegion, 1); memory_region_init_rom(flash_1, NULL, "omap_sx1.flash1-0", - flash1_size, &error_fatal); + FLASH1_SIZE, &error_fatal); memory_region_add_subregion(address_space, OMAP_CS1_BASE, flash_1); memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, - "sx1.cs1", OMAP_CS1_SIZE - flash1_size); + "sx1.cs1", OMAP_CS1_SIZE - FLASH1_SIZE); memory_region_add_subregion(address_space, - OMAP_CS1_BASE + flash1_size, &cs[1]); + OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", flash1_size, + "omap_sx1.flash1-1", FLASH1_SIZE, blk_by_legacy_dinfo(dinfo), - sector_size, 4, 0, 0, 0, 0, 0)) { + SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { fprintf(stderr, "qemu: Error registering flash memory %d.\n", fl_idx); } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v2_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v2; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } @@ -XXX,XX +XXX,XX @@ static void sx1_machine_v1_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v1; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t"); - mc->default_ram_size = sdram_size; + mc->default_ram_size = SDRAM_SIZE; mc->default_ram_id = "omap1.dram"; } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> IEC binary prefixes ease code review: the unit is explicit. Add the FLASH_SECTOR_SIZE definition. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/z2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "hw/arm/pxa.h" #include "hw/arm/boot.h" #include "hw/i2c/i2c.h" @@ -XXX,XX +XXX,XX @@ static const TypeInfo aer915_info = { .class_init = aer915_class_init, }; +#define FLASH_SECTOR_SIZE (64 * KiB) + static void z2_init(MachineState *machine) { - uint32_t sector_len = 0x10000; PXA2xxState *mpu; DriveInfo *dinfo; void *z2_lcd; @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - sector_len, 4, 0, 0, 0, 0, 0)) { + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { error_report("Error registering flash memory"); exit(1); } -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Upon introduction in commit b8433303fb ("Set proper device-width for vexpress flash"), ve_pflash_cfi01_register() was calling qdev_init_nofail() which can not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/vexpress.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) dinfo = drive_get(IF_PFLASH, 0, 0); pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0", dinfo); - if (!pflash0) { - error_report("vexpress: error registering flash 0"); - exit(1); - } if (map[VE_NORFLASHALIAS] != -1) { /* Map flash 0 as an alias into low memory */ @@ -XXX,XX +XXX,XX @@ static void vexpress_common_init(MachineState *machine) } dinfo = drive_get(IF_PFLASH, 0, 1); - if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", - dinfo)) { - error_report("vexpress: error registering flash 1"); - exit(1); - } + ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1", dinfo); sram_size = 0x2000000; memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Since its QOM'ification in commit 368a354f02 ("pflash_cfi0x: QOMified") the pflash_cfi01_register() function does not fail. This call was later converted with a script to use &error_fatal, still unable to fail. Remove the unreachable code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109115316.2235-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/gumstix.c | 18 ++++++------------ hw/arm/mainstone.c | 13 +++++-------- hw/arm/omap_sx1.c | 22 ++++++++-------------- hw/arm/versatilepb.c | 6 ++---- hw/arm/z2.c | 9 +++------ 5 files changed, 24 insertions(+), 44 deletions(-) diff --git a/hw/arm/gumstix.c b/hw/arm/gumstix.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/gumstix.c +++ b/hw/arm/gumstix.c @@ -XXX,XX +XXX,XX @@ static void connex_init(MachineState *machine) } /* Numonyx RC28F128J3F75 */ - if (!pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 36 */ smc91c111_init(&nd_table[0], 0x04000300, @@ -XXX,XX +XXX,XX @@ static void verdex_init(MachineState *machine) } /* Micron RC28F256P30TFA */ - if (!pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0); /* Interrupt line of NIC is connected to GPIO line 99 */ smc91c111_init(&nd_table[0], 0x04000300, diff --git a/hw/arm/mainstone.c b/hw/arm/mainstone.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mainstone.c +++ b/hw/arm/mainstone.c @@ -XXX,XX +XXX,XX @@ static void mainstone_common_init(MachineState *machine, /* There are two 32MiB flash devices on the board */ for (i = 0; i < 2; i ++) { dinfo = drive_get(IF_PFLASH, 0, i); - if (!pflash_cfi01_register(mainstone_flash_base[i], - i ? "mainstone.flash1" : "mainstone.flash0", - MAINSTONE_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(mainstone_flash_base[i], + i ? "mainstone.flash1" : "mainstone.flash0", + MAINSTONE_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); } mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS, diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) fl_idx = 0; if ((dinfo = drive_get(IF_PFLASH, 0, fl_idx)) != NULL) { - if (!pflash_cfi01_register(OMAP_CS0_BASE, - "omap_sx1.flash0-1", flash_size, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS0_BASE, + "omap_sx1.flash0-1", flash_size, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } @@ -XXX,XX +XXX,XX @@ static void sx1_init(MachineState *machine, const int version) memory_region_add_subregion(address_space, OMAP_CS1_BASE + FLASH1_SIZE, &cs[1]); - if (!pflash_cfi01_register(OMAP_CS1_BASE, - "omap_sx1.flash1-1", FLASH1_SIZE, - blk_by_legacy_dinfo(dinfo), - SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory %d.\n", - fl_idx); - } + pflash_cfi01_register(OMAP_CS1_BASE, + "omap_sx1.flash1-1", FLASH1_SIZE, + blk_by_legacy_dinfo(dinfo), + SECTOR_SIZE, 4, 0, 0, 0, 0, 0); fl_idx++; } else { memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -XXX,XX +XXX,XX @@ static void versatile_init(MachineState *machine, int board_id) /* 0x34000000 NOR Flash */ dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", + pflash_cfi01_register(VERSATILE_FLASH_ADDR, "versatile.flash", VERSATILE_FLASH_SIZE, dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, VERSATILE_FLASH_SECT_SIZE, - 4, 0x0089, 0x0018, 0x0000, 0x0, 0)) { - fprintf(stderr, "qemu: Error registering flash memory.\n"); - } + 4, 0x0089, 0x0018, 0x0000, 0x0, 0); versatile_binfo.ram_size = machine->ram_size; versatile_binfo.board_id = board_id; diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type); dinfo = drive_get(IF_PFLASH, 0, 0); - if (!pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, - dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, - FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0)) { - error_report("Error registering flash memory"); - exit(1); - } + pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE, + dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, + FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0); /* setup keypad */ pxa27x_register_keypad(mpu->kp, map, 0x100); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> To avoid forward-declaring PXA2xxI2CState, declare PXA2XX_I2C before its use in pxa2xx_i2c_init() prototype. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-2-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/pxa.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ void pxa27x_register_keypad(PXA2xxKeyPadState *kp, const struct keymap *map, int size); /* pxa2xx.c */ -typedef struct PXA2xxI2CState PXA2xxI2CState; +#define TYPE_PXA2XX_I2C "pxa2xx_i2c" +OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) + PXA2xxI2CState *pxa2xx_i2c_init(hwaddr base, qemu_irq irq, uint32_t page_size); I2CBus *pxa2xx_i2c_bus(PXA2xxI2CState *s); -#define TYPE_PXA2XX_I2C "pxa2xx_i2c" typedef struct PXA2xxI2SState PXA2xxI2SState; -OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxI2CState, PXA2XX_I2C) #define TYPE_PXA2XX_FIR "pxa2xx-fir" OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxFIrState, PXA2XX_FIR) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Add a local 'struct omap_gpif_s *' variable to improve readability. (This also eases next commit conversion). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-3-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/omap_gpio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpio_s *s = &((struct omap_gpif_s *) opaque)->omap1; + struct omap_gpif_s *p = opaque; + struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; if (level) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-4-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/omap1.c | 115 ++++++++++++++++++-------------------- hw/arm/omap2.c | 40 ++++++------- hw/arm/omap_sx1.c | 2 +- hw/arm/palm.c | 2 +- hw/char/omap_uart.c | 7 +-- hw/display/omap_dss.c | 15 +++-- hw/display/omap_lcdc.c | 9 ++- hw/dma/omap_dma.c | 15 +++-- hw/gpio/omap_gpio.c | 15 +++-- hw/intc/omap_intc.c | 12 ++-- hw/misc/omap_gpmc.c | 12 ++-- hw/misc/omap_l4.c | 7 +-- hw/misc/omap_sdrc.c | 7 +-- hw/misc/omap_tap.c | 5 +- hw/sd/omap_mmc.c | 9 ++- hw/ssi/omap_spi.c | 7 +-- hw/timer/omap_gptimer.c | 22 ++++---- hw/timer/omap_synctimer.c | 4 +- 18 files changed, 142 insertions(+), 163 deletions(-) diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -XXX,XX +XXX,XX @@ static void omap_timer_fire(void *opaque) static void omap_timer_tick(void *opaque) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); omap_timer_fire(timer); @@ -XXX,XX +XXX,XX @@ static void omap_timer_tick(void *opaque) static void omap_timer_clk_update(void *opaque, int line, int on) { - struct omap_mpu_timer_s *timer = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *timer = opaque; omap_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ static void omap_timer_clk_setup(struct omap_mpu_timer_s *timer) static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpu_timer_read(void *opaque, hwaddr addr, static void omap_mpu_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_timer_s *s = (struct omap_mpu_timer_s *) opaque; + struct omap_mpu_timer_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_watchdog_timer_s { static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_wd_timer_read(void *opaque, hwaddr addr, static void omap_wd_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_watchdog_timer_s *s = (struct omap_watchdog_timer_s *) opaque; + struct omap_watchdog_timer_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_32khz_timer_s { static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_os_timer_read(void *opaque, hwaddr addr, static void omap_os_timer_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_32khz_timer_s *s = (struct omap_32khz_timer_s *) opaque; + struct omap_32khz_timer_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static struct omap_32khz_timer_s *omap_os_timer_init(MemoryRegion *memory, static uint64_t omap_ulpd_pm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_ulpd_req_update(struct omap_mpu_state_s *s, static void omap_ulpd_pm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; int64_t now, ticks; int div, mult; static const int bypass_div[4] = { 1, 2, 4, 4 }; @@ -XXX,XX +XXX,XX @@ static void omap_ulpd_pm_init(MemoryRegion *system_memory, static uint64_t omap_pin_cfg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_pin_modconf1_update(struct omap_mpu_state_s *s, static void omap_pin_cfg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t diff; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_pin_cfg_init(MemoryRegion *system_memory, static uint64_t omap_id_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static void omap_id_init(MemoryRegion *memory, struct omap_mpu_state_s *mpu) static uint64_t omap_mpui_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpui_read(void *opaque, hwaddr addr, static void omap_mpui_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_tipb_bridge_s { static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tipb_bridge_read(void *opaque, hwaddr addr, static void omap_tipb_bridge_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_tipb_bridge_s *s = (struct omap_tipb_bridge_s *) opaque; + struct omap_tipb_bridge_s *s = opaque; if (size < 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static struct omap_tipb_bridge_s *omap_tipb_bridge_init( static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_tcmi_read(void *opaque, hwaddr addr, static void omap_tcmi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct dpll_ctl_s { static uint64_t omap_dpll_read(void *opaque, hwaddr addr, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dpll_read(void *opaque, hwaddr addr, static void omap_dpll_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct dpll_ctl_s *s = (struct dpll_ctl_s *) opaque; + struct dpll_ctl_s *s = opaque; uint16_t diff; static const int bypass_div[4] = { 1, 2, 4, 4 }; int div, mult; @@ -XXX,XX +XXX,XX @@ static struct dpll_ctl_s *omap_dpll_init(MemoryRegion *memory, static uint64_t omap_clkm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static inline void omap_clkm_ckout1_update(struct omap_mpu_state_s *s, static void omap_clkm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; omap_clk clk; static const char *clkschemename[8] = { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_clkm_ops = { static uint64_t omap_clkdsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; CPUState *cpu = CPU(s->cpu); if (size != 2) { @@ -XXX,XX +XXX,XX @@ static inline void omap_clkdsp_idlect2_update(struct omap_mpu_state_s *s, static void omap_clkdsp_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; uint16_t diff; if (size != 2) { @@ -XXX,XX +XXX,XX @@ struct omap_mpuio_s { static void omap_mpuio_set(void *opaque, int line, int level) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; uint16_t prev = s->inputs; if (level) @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_kbd_update(struct omap_mpuio_s *s) static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mpuio_read(void *opaque, hwaddr addr, static void omap_mpuio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap_mpuio_reset(struct omap_mpuio_s *s) static void omap_mpuio_onoff(void *opaque, int line, int on) { - struct omap_mpuio_s *s = (struct omap_mpuio_s *) opaque; + struct omap_mpuio_s *s = opaque; s->clk = on; if (on) @@ -XXX,XX +XXX,XX @@ static void omap_uwire_transfer_start(struct omap_uwire_s *s) } } -static uint64_t omap_uwire_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uwire_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uwire_read(void *opaque, hwaddr addr, static void omap_uwire_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uwire_s *s = (struct omap_uwire_s *) opaque; + struct omap_uwire_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_update(struct omap_pwl_s *s) } } -static uint64_t omap_pwl_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwl_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwl_read(void *opaque, hwaddr addr, static void omap_pwl_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_pwl_reset(struct omap_pwl_s *s) static void omap_pwl_clk_update(void *opaque, int line, int on) { - struct omap_pwl_s *s = (struct omap_pwl_s *) opaque; + struct omap_pwl_s *s = opaque; s->clk = on; omap_pwl_update(s); @@ -XXX,XX +XXX,XX @@ struct omap_pwt_s { omap_clk clk; }; -static uint64_t omap_pwt_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_pwt_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_pwt_read(void *opaque, hwaddr addr, static void omap_pwt_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_pwt_s *s = (struct omap_pwt_s *) opaque; + struct omap_pwt_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static void omap_rtc_alarm_update(struct omap_rtc_s *s) printf("%s: conversion failed\n", __func__); } -static uint64_t omap_rtc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rtc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint8_t i; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rtc_read(void *opaque, hwaddr addr, static void omap_rtc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_rtc_s *s = (struct omap_rtc_s *) opaque; + struct omap_rtc_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; struct tm new_tm; time_t ti[2]; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_rx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_source_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->rx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_tx_newdata(struct omap_mcbsp_s *s) static void omap_mcbsp_sink_tick(void *opaque) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; static const int bps[8] = { 0, 1, 1, 2, 2, 2, -255, -255 }; if (!s->tx_rate) @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_req_update(struct omap_mcbsp_s *s) static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, static void omap_mcbsp_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; switch (offset) { @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr, static void omap_mcbsp_writew(void *opaque, hwaddr addr, uint32_t value) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (offset == 0x04) { /* DXR */ @@ -XXX,XX +XXX,XX @@ static struct omap_mcbsp_s *omap_mcbsp_init(MemoryRegion *system_memory, static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->rx_rate) { s->rx_req = s->codec->in.len; @@ -XXX,XX +XXX,XX @@ static void omap_mcbsp_i2s_swallow(void *opaque, int line, int level) static void omap_mcbsp_i2s_start(void *opaque, int line, int level) { - struct omap_mcbsp_s *s = (struct omap_mcbsp_s *) opaque; + struct omap_mcbsp_s *s = opaque; if (s->tx_rate) { s->tx_req = s->codec->out.size; @@ -XXX,XX +XXX,XX @@ static void omap_lpg_reset(struct omap_lpg_s *s) omap_lpg_update(s); } -static uint64_t omap_lpg_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lpg_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lpg_read(void *opaque, hwaddr addr, static void omap_lpg_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 1) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_lpg_ops = { static void omap_lpg_clk_update(void *opaque, int line, int on) { - struct omap_lpg_s *s = (struct omap_lpg_s *) opaque; + struct omap_lpg_s *s = opaque; s->clk = on; omap_lpg_update(s); @@ -XXX,XX +XXX,XX @@ static void omap_setup_mpui_io(MemoryRegion *system_memory, /* General chip reset */ static void omap1_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_mpu_timer_reset(mpu->timer[0]); @@ -XXX,XX +XXX,XX @@ static void omap_setup_dsp_mapping(MemoryRegion *system_memory, void omap_mpu_wakeup(void *opaque, int irq, int req) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; CPUState *cpu = CPU(mpu->cpu); if (cpu->halted) { diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -XXX,XX +XXX,XX @@ static inline void omap_eac_out_empty(struct omap_eac_s *s) static void omap_eac_in_cb(void *opaque, int avail_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.rxavail = avail_b >> 2; omap_eac_in_refill(s); @@ -XXX,XX +XXX,XX @@ static void omap_eac_in_cb(void *opaque, int avail_b) static void omap_eac_out_cb(void *opaque, int free_b) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; s->codec.txavail = free_b >> 2; if (s->codec.txlen) @@ -XXX,XX +XXX,XX @@ static void omap_eac_reset(struct omap_eac_s *s) omap_eac_interrupt_update(s); } -static uint64_t omap_eac_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_eac_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; uint32_t ret; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_eac_read(void *opaque, hwaddr addr, static void omap_eac_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_eac_s *s = (struct omap_eac_s *) opaque; + struct omap_eac_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_sti_reset(struct omap_sti_s *s) static uint64_t omap_sti_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_read(void *opaque, hwaddr addr, static void omap_sti_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_sti_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, unsigned size) { OMAP_BAD_REG(addr); return 0; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, static void omap_sti_fifo_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sti_s *s = (struct omap_sti_s *) opaque; + struct omap_sti_s *s = opaque; int ch = addr >> 6; uint8_t byte = value; @@ -XXX,XX +XXX,XX @@ static void omap_prcm_int_update(struct omap_prcm_s *s, int dom) static uint64_t omap_prcm_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; uint32_t ret; if (size != 4) { @@ -XXX,XX +XXX,XX @@ static void omap_prcm_dpll_update(struct omap_prcm_s *s) static void omap_prcm_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; + struct omap_prcm_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ struct omap_sysctl_s { static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int value; @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) return 0; } -static void omap_sysctl_write8(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write8(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; int pad_offset, byte_offset; int prev_value; @@ -XXX,XX +XXX,XX @@ static void omap_sysctl_write8(void *opaque, hwaddr addr, } } -static void omap_sysctl_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_sysctl_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; + struct omap_sysctl_s *s = opaque; switch (addr) { case 0x000: /* CONTROL_REVISION */ @@ -XXX,XX +XXX,XX @@ static struct omap_sysctl_s *omap_sysctl_init(struct omap_target_agent_s *ta, /* General chip reset */ static void omap2_mpu_reset(void *opaque) { - struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *mpu = opaque; omap_dma_reset(mpu->dma); omap_prcm_reset(mpu->prcm); diff --git a/hw/arm/omap_sx1.c b/hw/arm/omap_sx1.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/omap_sx1.c +++ b/hw/arm/omap_sx1.c @@ -XXX,XX +XXX,XX @@ static uint64_t static_read(void *opaque, hwaddr offset, unsigned size) { - uint32_t *val = (uint32_t *) opaque; + uint32_t *val = opaque; uint32_t mask = (4 / size) - 1; return *val >> ((offset & mask) << 3); diff --git a/hw/arm/palm.c b/hw/arm/palm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/palm.c +++ b/hw/arm/palm.c @@ -XXX,XX +XXX,XX @@ static struct { static void palmte_button_event(void *opaque, int keycode) { - struct omap_mpu_state_s *cpu = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *cpu = opaque; if (palmte_keymap[keycode & 0x7f].row != -1) omap_mpuio_key(cpu->mpuio, diff --git a/hw/char/omap_uart.c b/hw/char/omap_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/omap_uart.c +++ b/hw/char/omap_uart.c @@ -XXX,XX +XXX,XX @@ struct omap_uart_s *omap_uart_init(hwaddr base, return s; } -static uint64_t omap_uart_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_uart_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { return omap_badwidth_read8(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_uart_read(void *opaque, hwaddr addr, static void omap_uart_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_uart_s *s = (struct omap_uart_s *) opaque; + struct omap_uart_s *s = opaque; if (size == 4) { omap_badwidth_write8(opaque, addr, value); diff --git a/hw/display/omap_dss.c b/hw/display/omap_dss.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_dss.c +++ b/hw/display/omap_dss.c @@ -XXX,XX +XXX,XX @@ void omap_dss_reset(struct omap_dss_s *s) static uint64_t omap_diss_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_diss_read(void *opaque, hwaddr addr, static void omap_diss_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_diss_ops = { static uint64_t omap_disc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_disc_read(void *opaque, hwaddr addr, static void omap_disc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); @@ -XXX,XX +XXX,XX @@ static void omap_rfbi_transfer_start(struct omap_dss_s *s) omap_dispc_interrupt_update(s); } -static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_rfbi_read(void *opaque, hwaddr addr, static void omap_rfbi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dss_s *s = (struct omap_dss_s *) opaque; + struct omap_dss_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/display/omap_lcdc.c b/hw/display/omap_lcdc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/omap_lcdc.c +++ b/hw/display/omap_lcdc.c @@ -XXX,XX +XXX,XX @@ static void draw_line16_32(void *opaque, uint8_t *d, const uint8_t *s, static void omap_update_display(void *opaque) { - struct omap_lcd_panel_s *omap_lcd = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *omap_lcd = opaque; DisplaySurface *surface; drawfn draw_line; int size, height, first, last; @@ -XXX,XX +XXX,XX @@ static void omap_lcd_update(struct omap_lcd_panel_s *s) { } } -static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap_lcdc_read(void *opaque, hwaddr addr, static void omap_lcdc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; + struct omap_lcd_panel_s *s = opaque; switch (addr) { case 0x00: /* LCD_CONTROL */ diff --git a/hw/dma/omap_dma.c b/hw/dma/omap_dma.c index XXXXXXX..XXXXXXX 100644 --- a/hw/dma/omap_dma.c +++ b/hw/dma/omap_dma.c @@ -XXX,XX +XXX,XX @@ static int omap_dma_sys_read(struct omap_dma_s *s, int offset, return 0; } -static uint64_t omap_dma_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_dma_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; uint16_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma_read(void *opaque, hwaddr addr, static void omap_dma_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int reg, ch; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_dma_ops = { static void omap_dma_request(void *opaque, int drq, int req) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; /* The request pins are level triggered in QEMU. */ if (req) { if (~s->dma->drqbmp & (1ULL << drq)) { @@ -XXX,XX +XXX,XX @@ static void omap_dma_request(void *opaque, int drq, int req) /* XXX: this won't be needed once soc_dma knows about clocks. */ static void omap_dma_clk_update(void *opaque, int line, int on) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int i; s->dma->freq = omap_clk_getrate(s->clk); @@ -XXX,XX +XXX,XX @@ static void omap_dma_interrupts_4_update(struct omap_dma_s *s) static uint64_t omap_dma4_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int irqn = 0, chnum; struct omap_dma_channel_s *ch; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_dma4_read(void *opaque, hwaddr addr, static void omap_dma4_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_dma_s *s = (struct omap_dma_s *) opaque; + struct omap_dma_s *s = opaque; int chnum, irqn = 0; struct omap_dma_channel_s *ch; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ static void omap_gpio_set(void *opaque, int line, int level) static uint64_t omap_gpio_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; if (size != 2) { @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpio_read(void *opaque, hwaddr addr, static void omap_gpio_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpio_s *s = (struct omap_gpio_s *) opaque; + struct omap_gpio_s *s = opaque; int offset = addr & OMAP_MPUI_REG_MASK; uint16_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_module_reset(struct omap2_gpio_s *s) static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; switch (addr) { case 0x00: /* GPIO_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap2_gpio_module_read(void *opaque, hwaddr addr) static void omap2_gpio_module_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap2_gpio_s *s = (struct omap2_gpio_s *) opaque; + struct omap2_gpio_s *s = opaque; uint32_t diff; int ln; @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) s->gpo = 0; } -static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = (struct omap2_gpif_s *) opaque; + struct omap2_gpif_s *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque; + struct omap_intr_handler_s *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; diff --git a/hw/misc/omap_gpmc.c b/hw/misc/omap_gpmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_gpmc.c +++ b/hw/misc/omap_gpmc.c @@ -XXX,XX +XXX,XX @@ static void omap_gpmc_dma_update(struct omap_gpmc_s *s, int value) static uint64_t omap_nand_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; uint64_t v; nand_setpins(f->dev, 0, 0, 0, 1, 0); switch (omap_gpmc_devsize(f)) { @@ -XXX,XX +XXX,XX @@ static void omap_nand_setio(DeviceState *dev, uint64_t value, static void omap_nand_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_cs_file_s *f = (struct omap_gpmc_cs_file_s *)opaque; + struct omap_gpmc_cs_file_s *f = opaque; nand_setpins(f->dev, 0, 0, 0, 1, 0); omap_nand_setio(f->dev, value, omap_gpmc_devsize(f), size); } @@ -XXX,XX +XXX,XX @@ static void fill_prefetch_fifo(struct omap_gpmc_s *s) static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; uint32_t data; if (s->prefetch.config1 & 1) { /* The TRM doesn't define the behaviour if you read from the @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_prefetch_read(void *opaque, hwaddr addr, static void omap_gpmc_prefetch_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs = prefetch_cs(s->prefetch.config1); if ((s->prefetch.config1 & 1) == 0) { /* The TRM doesn't define the behaviour of writing to the @@ -XXX,XX +XXX,XX @@ static int gpmc_wordaccess_only(hwaddr addr) static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_gpmc_read(void *opaque, hwaddr addr, static void omap_gpmc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_gpmc_s *s = (struct omap_gpmc_s *) opaque; + struct omap_gpmc_s *s = opaque; int cs; struct omap_gpmc_cs_file_s *f; diff --git a/hw/misc/omap_l4.c b/hw/misc/omap_l4.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_l4.c +++ b/hw/misc/omap_l4.c @@ -XXX,XX +XXX,XX @@ hwaddr omap_l4_region_size(struct omap_target_agent_s *ta, return ta->start[region].size; } -static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_l4ta_read(void *opaque, hwaddr addr, static void omap_l4ta_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_target_agent_s *s = (struct omap_target_agent_s *) opaque; + struct omap_target_agent_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_sdrc.c b/hw/misc/omap_sdrc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_sdrc.c +++ b/hw/misc/omap_sdrc.c @@ -XXX,XX +XXX,XX @@ void omap_sdrc_reset(struct omap_sdrc_s *s) s->config = 0x10; } -static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); @@ -XXX,XX +XXX,XX @@ static uint64_t omap_sdrc_read(void *opaque, hwaddr addr, static void omap_sdrc_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_sdrc_s *s = (struct omap_sdrc_s *) opaque; + struct omap_sdrc_s *s = opaque; if (size != 4) { omap_badwidth_write32(opaque, addr, value); diff --git a/hw/misc/omap_tap.c b/hw/misc/omap_tap.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/omap_tap.c +++ b/hw/misc/omap_tap.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/omap.h" /* TEST-Chip-level TAP */ -static uint64_t omap_tap_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_tap_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) opaque; + struct omap_mpu_state_s *s = opaque; if (size != 4) { return omap_badwidth_read32(opaque, addr); diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ void omap_mmc_reset(struct omap_mmc_s *host) device_cold_reset(DEVICE(host->card)); } -static uint64_t omap_mmc_read(void *opaque, hwaddr offset, - unsigned size) +static uint64_t omap_mmc_read(void *opaque, hwaddr offset, unsigned size) { uint16_t i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { return omap_badwidth_read16(opaque, offset); @@ -XXX,XX +XXX,XX @@ static void omap_mmc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { int i; - struct omap_mmc_s *s = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *s = opaque; if (size != 2) { omap_badwidth_write16(opaque, offset, value); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_mmc_ops = { static void omap_mmc_cover_cb(void *opaque, int line, int level) { - struct omap_mmc_s *host = (struct omap_mmc_s *) opaque; + struct omap_mmc_s *host = opaque; if (!host->cdet_state && level) { host->status |= 0x0002; diff --git a/hw/ssi/omap_spi.c b/hw/ssi/omap_spi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/omap_spi.c +++ b/hw/ssi/omap_spi.c @@ -XXX,XX +XXX,XX @@ void omap_mcspi_reset(struct omap_mcspi_s *s) omap_mcspi_interrupt_update(s); } -static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, - unsigned size) +static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; uint32_t ret; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_mcspi_read(void *opaque, hwaddr addr, static void omap_mcspi_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_mcspi_s *s = (struct omap_mcspi_s *) opaque; + struct omap_mcspi_s *s = opaque; int ch = 0; if (size != 4) { diff --git a/hw/timer/omap_gptimer.c b/hw/timer/omap_gptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_gptimer.c +++ b/hw/timer/omap_gptimer.c @@ -XXX,XX +XXX,XX @@ static inline void omap_gp_timer_trigger(struct omap_gp_timer_s *timer) static void omap_gp_timer_tick(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (!timer->ar) { timer->st = 0; @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_tick(void *opaque) static void omap_gp_timer_match(void *opaque) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; if (timer->trigger == gpt_trigger_both) omap_gp_timer_trigger(timer); @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_match(void *opaque) static void omap_gp_timer_input(void *opaque, int line, int on) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; int trigger; switch (s->capture) { @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_input(void *opaque, int line, int on) static void omap_gp_timer_clk_update(void *opaque, int line, int on) { - struct omap_gp_timer_s *timer = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *timer = opaque; omap_gp_timer_sync(timer); timer->rate = on ? omap_clk_getrate(timer->clk) : 0; @@ -XXX,XX +XXX,XX @@ void omap_gp_timer_reset(struct omap_gp_timer_s *s) static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readw(void *opaque, hwaddr addr) static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; uint32_t ret; if (addr & 2) @@ -XXX,XX +XXX,XX @@ static uint32_t omap_gp_timer_readh(void *opaque, hwaddr addr) } } -static void omap_gp_timer_write(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_write(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; switch (addr) { case 0x00: /* TIDR */ @@ -XXX,XX +XXX,XX @@ static void omap_gp_timer_write(void *opaque, hwaddr addr, } } -static void omap_gp_timer_writeh(void *opaque, hwaddr addr, - uint32_t value) +static void omap_gp_timer_writeh(void *opaque, hwaddr addr, uint32_t value) { - struct omap_gp_timer_s *s = (struct omap_gp_timer_s *) opaque; + struct omap_gp_timer_s *s = opaque; if (addr & 2) omap_gp_timer_write(opaque, addr, (value << 16) | s->writeh); diff --git a/hw/timer/omap_synctimer.c b/hw/timer/omap_synctimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/omap_synctimer.c +++ b/hw/timer/omap_synctimer.c @@ -XXX,XX +XXX,XX @@ void omap_synctimer_reset(struct omap_synctimer_s *s) static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; switch (addr) { case 0x00: /* 32KSYNCNT_REV */ @@ -XXX,XX +XXX,XX @@ static uint32_t omap_synctimer_readw(void *opaque, hwaddr addr) static uint32_t omap_synctimer_readh(void *opaque, hwaddr addr) { - struct omap_synctimer_s *s = (struct omap_synctimer_s *) opaque; + struct omap_synctimer_s *s = opaque; uint32_t ret; if (addr & 2) -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_gpif_s -> Omap1GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-5-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 6 +++--- hw/gpio/omap_gpio.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_i2c_set_fclk(OMAPI2CState *i2c, omap_clk clk); /* omap_gpio.c */ #define TYPE_OMAP1_GPIO "omap-gpio" -DECLARE_INSTANCE_CHECKER(struct omap_gpif_s, OMAP1_GPIO, +typedef struct Omap1GpioState Omap1GpioState; +DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap_gpif_s omap_gpif; typedef struct omap2_gpif_s omap2_gpif; /* TODO: clock framework (see above) */ -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk); +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap_gpio_s { uint16_t pins; }; -struct omap_gpif_s { +struct Omap1GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ struct omap_gpif_s { /* General-Purpose I/O of OMAP1 */ static void omap_gpio_set(void *opaque, int line, int level) { - struct omap_gpif_s *p = opaque; + Omap1GpioState *p = opaque; struct omap_gpio_s *s = &p->omap1; uint16_t prev = s->inputs; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpio_module_ops = { static void omap_gpif_reset(DeviceState *dev) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); omap_gpio_reset(&s->omap1); } @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_gpif_top_ops = { static void omap_gpio_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_gpif_s *s = OMAP1_GPIO(obj); + Omap1GpioState *s = OMAP1_GPIO(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); qdev_init_gpio_in(dev, omap_gpio_set, 16); @@ -XXX,XX +XXX,XX @@ static void omap_gpio_init(Object *obj) static void omap_gpio_realize(DeviceState *dev, Error **errp) { - struct omap_gpif_s *s = OMAP1_GPIO(dev); + Omap1GpioState *s = OMAP1_GPIO(dev); if (!s->clk) { error_setg(errp, "omap-gpio: clk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_realize(DeviceState *dev, Error **errp) } } -void omap_gpio_set_clk(omap_gpif *gpio, omap_clk clk) +void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk) { gpio->clk = clk; } static Property omap_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap1GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap_gpio_info = { .name = TYPE_OMAP1_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap_gpif_s), + .instance_size = sizeof(Omap1GpioState), .instance_init = omap_gpio_init, .class_init = omap_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap2_gpif_s -> Omap2GpioState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-6-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/gpio/omap_gpio.c | 20 ++++++++++---------- 2 files changed, 14 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(Omap1GpioState, OMAP1_GPIO, TYPE_OMAP1_GPIO) #define TYPE_OMAP2_GPIO "omap2-gpio" -DECLARE_INSTANCE_CHECKER(struct omap2_gpif_s, OMAP2_GPIO, +typedef struct Omap2GpioState Omap2GpioState; +DECLARE_INSTANCE_CHECKER(Omap2GpioState, OMAP2_GPIO, TYPE_OMAP2_GPIO) -typedef struct omap2_gpif_s omap2_gpif; - /* TODO: clock framework (see above) */ void omap_gpio_set_clk(Omap1GpioState *gpio, omap_clk clk); -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk); -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk); +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk); +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk); /* OMAP2 l4 Interconnect */ struct omap_l4_s; diff --git a/hw/gpio/omap_gpio.c b/hw/gpio/omap_gpio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/omap_gpio.c +++ b/hw/gpio/omap_gpio.c @@ -XXX,XX +XXX,XX @@ struct omap2_gpio_s { uint8_t delay; }; -struct omap2_gpif_s { +struct Omap2GpioState { SysBusDevice parent_obj; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ static inline void omap2_gpio_module_int(struct omap2_gpio_s *s, int line) static void omap2_gpio_set(void *opaque, int line, int level) { - struct omap2_gpif_s *p = opaque; + Omap2GpioState *p = opaque; struct omap2_gpio_s *s = &p->modules[line >> 5]; line &= 31; @@ -XXX,XX +XXX,XX @@ static void omap_gpif_reset(DeviceState *dev) static void omap2_gpif_reset(DeviceState *dev) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); int i; for (i = 0; i < s->modulecount; i++) { @@ -XXX,XX +XXX,XX @@ static void omap2_gpif_reset(DeviceState *dev) static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_gpif_top_read(void *opaque, hwaddr addr, unsigned size) static void omap2_gpif_top_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap2_gpif_s *s = opaque; + Omap2GpioState *s = opaque; switch (addr) { case 0x00: /* IPGENERICOCPSPL_REVISION */ @@ -XXX,XX +XXX,XX @@ static void omap_gpio_realize(DeviceState *dev, Error **errp) static void omap2_gpio_realize(DeviceState *dev, Error **errp) { - struct omap2_gpif_s *s = OMAP2_GPIO(dev); + Omap2GpioState *s = OMAP2_GPIO(dev); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); int i; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_gpio_info = { .class_init = omap_gpio_class_init, }; -void omap2_gpio_set_iclk(omap2_gpif *gpio, omap_clk clk) +void omap2_gpio_set_iclk(Omap2GpioState *gpio, omap_clk clk) { gpio->iclk = clk; } -void omap2_gpio_set_fclk(omap2_gpif *gpio, uint8_t i, omap_clk clk) +void omap2_gpio_set_fclk(Omap2GpioState *gpio, uint8_t i, omap_clk clk) { assert(i <= 5); gpio->fclk[i] = clk; } static Property omap2_gpio_properties[] = { - DEFINE_PROP_INT32("mpu_model", struct omap2_gpif_s, mpu_model, 0), + DEFINE_PROP_INT32("mpu_model", Omap2GpioState, mpu_model, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void omap2_gpio_class_init(ObjectClass *klass, void *data) static const TypeInfo omap2_gpio_info = { .name = TYPE_OMAP2_GPIO, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct omap2_gpif_s), + .instance_size = sizeof(Omap2GpioState), .class_init = omap2_gpio_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename omap_intr_handler_s -> OMAPIntcState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-7-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/omap.h | 9 ++++----- hw/intc/omap_intc.c | 38 +++++++++++++++++++------------------- 2 files changed, 23 insertions(+), 24 deletions(-) diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/omap.h +++ b/include/hw/arm/omap.h @@ -XXX,XX +XXX,XX @@ void omap_clk_reparent(omap_clk clk, omap_clk parent); /* omap_intc.c */ #define TYPE_OMAP_INTC "common-omap-intc" -typedef struct omap_intr_handler_s omap_intr_handler; -DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, - TYPE_OMAP_INTC) +typedef struct OMAPIntcState OMAPIntcState; +DECLARE_INSTANCE_CHECKER(OMAPIntcState, OMAP_INTC, TYPE_OMAP_INTC) /* @@ -XXX,XX +XXX,XX @@ DECLARE_INSTANCE_CHECKER(omap_intr_handler, OMAP_INTC, * (ie the struct omap_mpu_state_s*) to do the clockname to pointer * translation.) */ -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk); -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk); +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk); +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk); /* omap_i2c.c */ #define TYPE_OMAP_I2C "omap_i2c" diff --git a/hw/intc/omap_intc.c b/hw/intc/omap_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/omap_intc.c +++ b/hw/intc/omap_intc.c @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_bank_s { unsigned char priority[32]; }; -struct omap_intr_handler_s { +struct OMAPIntcState { SysBusDevice parent_obj; qemu_irq *pins; @@ -XXX,XX +XXX,XX @@ struct omap_intr_handler_s { struct omap_intr_handler_bank_s bank[3]; }; -static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) +static void omap_inth_sir_update(OMAPIntcState *s, int is_fiq) { int i, j, sir_intr, p_intr, p; uint32_t level; @@ -XXX,XX +XXX,XX @@ static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq) s->sir_intr[is_fiq] = sir_intr; } -static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) +static inline void omap_inth_update(OMAPIntcState *s, int is_fiq) { int i; uint32_t has_intr = 0; @@ -XXX,XX +XXX,XX @@ static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq) static void omap_set_intr(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr(void *opaque, int irq, int req) /* Simplified version with no edge detection */ static void omap_set_intr_noedge(void *opaque, int irq, int req) { - struct omap_intr_handler_s *ih = opaque; + OMAPIntcState *ih = opaque; uint32_t rise; struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5]; @@ -XXX,XX +XXX,XX @@ static void omap_set_intr_noedge(void *opaque, int irq, int req) static uint64_t omap_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; int line_no; @@ -XXX,XX +XXX,XX @@ static uint64_t omap_inth_read(void *opaque, hwaddr addr, static void omap_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int i, offset = addr; int bank_no = offset >> 8; struct omap_intr_handler_bank_s *bank = &s->bank[bank_no]; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap_inth_mem_ops = { static void omap_inth_reset(DeviceState *dev) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); int i; for (i = 0; i < s->nbanks; ++i){ @@ -XXX,XX +XXX,XX @@ static void omap_inth_reset(DeviceState *dev) static void omap_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->nbanks = 1; @@ -XXX,XX +XXX,XX @@ static void omap_intc_init(Object *obj) static void omap_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap-intc: clk not connected"); } } -void omap_intc_set_iclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_iclk(OMAPIntcState *intc, omap_clk clk) { intc->iclk = clk; } -void omap_intc_set_fclk(omap_intr_handler *intc, omap_clk clk) +void omap_intc_set_fclk(OMAPIntcState *intc, omap_clk clk) { intc->fclk = clk; } static Property omap_intc_properties[] = { - DEFINE_PROP_UINT32("size", struct omap_intr_handler_s, size, 0x100), + DEFINE_PROP_UINT32("size", OMAPIntcState, size, 0x100), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap_intc_info = { static uint64_t omap2_inth_read(void *opaque, hwaddr addr, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static uint64_t omap2_inth_read(void *opaque, hwaddr addr, static void omap2_inth_write(void *opaque, hwaddr addr, uint64_t value, unsigned size) { - struct omap_intr_handler_s *s = opaque; + OMAPIntcState *s = opaque; int offset = addr; int bank_no, line_no; struct omap_intr_handler_bank_s *bank = NULL; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps omap2_inth_mem_ops = { static void omap2_intc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - struct omap_intr_handler_s *s = OMAP_INTC(obj); + OMAPIntcState *s = OMAP_INTC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); s->level_only = 1; @@ -XXX,XX +XXX,XX @@ static void omap2_intc_init(Object *obj) static void omap2_intc_realize(DeviceState *dev, Error **errp) { - struct omap_intr_handler_s *s = OMAP_INTC(dev); + OMAPIntcState *s = OMAP_INTC(dev); if (!s->iclk) { error_setg(errp, "omap2-intc: iclk not connected"); @@ -XXX,XX +XXX,XX @@ static void omap2_intc_realize(DeviceState *dev, Error **errp) } static Property omap2_intc_properties[] = { - DEFINE_PROP_UINT8("revision", struct omap_intr_handler_s, + DEFINE_PROP_UINT8("revision", OMAPIntcState, revision, 0x21), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static const TypeInfo omap2_intc_info = { static const TypeInfo omap_intc_type_info = { .name = TYPE_OMAP_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(omap_intr_handler), + .instance_size = sizeof(OMAPIntcState), .abstract = true, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-8-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = (stellaris_adc_state *)opaque; + stellaris_adc_state *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> Following docs/devel/style.rst guidelines, rename stellaris_adc_state -> StellarisADCState. This also remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-9-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 73 +++++++++++++++++++++++----------------------- 1 file changed, 36 insertions(+), 37 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_i2c_init(Object *obj) #define STELLARIS_ADC_FIFO_FULL 0x1000 #define TYPE_STELLARIS_ADC "stellaris-adc" -typedef struct StellarisADCState stellaris_adc_state; -DECLARE_INSTANCE_CHECKER(stellaris_adc_state, STELLARIS_ADC, - TYPE_STELLARIS_ADC) +typedef struct StellarisADCState StellarisADCState; +DECLARE_INSTANCE_CHECKER(StellarisADCState, STELLARIS_ADC, TYPE_STELLARIS_ADC) struct StellarisADCState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct StellarisADCState { qemu_irq irq[4]; }; -static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) +static uint32_t stellaris_adc_fifo_read(StellarisADCState *s, int n) { int tail; @@ -XXX,XX +XXX,XX @@ static uint32_t stellaris_adc_fifo_read(stellaris_adc_state *s, int n) return s->fifo[n].data[tail]; } -static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, +static void stellaris_adc_fifo_write(StellarisADCState *s, int n, uint32_t value) { int head; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_fifo_write(stellaris_adc_state *s, int n, s->fifo[n].state |= STELLARIS_ADC_FIFO_FULL; } -static void stellaris_adc_update(stellaris_adc_state *s) +static void stellaris_adc_update(StellarisADCState *s) { int level; int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_update(stellaris_adc_state *s) static void stellaris_adc_trigger(void *opaque, int irq, int level) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; int n; for (n = 0; n < 4; n++) { @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_trigger(void *opaque, int irq, int level) } } -static void stellaris_adc_reset(stellaris_adc_state *s) +static void stellaris_adc_reset(StellarisADCState *s) { int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_reset(stellaris_adc_state *s) static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static uint64_t stellaris_adc_read(void *opaque, hwaddr offset, static void stellaris_adc_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - stellaris_adc_state *s = opaque; + StellarisADCState *s = opaque; /* TODO: Implement this. */ if (offset >= 0x40 && offset < 0xc0) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_UINT32(actss, stellaris_adc_state), - VMSTATE_UINT32(ris, stellaris_adc_state), - VMSTATE_UINT32(im, stellaris_adc_state), - VMSTATE_UINT32(emux, stellaris_adc_state), - VMSTATE_UINT32(ostat, stellaris_adc_state), - VMSTATE_UINT32(ustat, stellaris_adc_state), - VMSTATE_UINT32(sspri, stellaris_adc_state), - VMSTATE_UINT32(sac, stellaris_adc_state), - VMSTATE_UINT32(fifo[0].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[0].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[0], stellaris_adc_state), - VMSTATE_UINT32(ssctl[0], stellaris_adc_state), - VMSTATE_UINT32(fifo[1].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[1].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[1], stellaris_adc_state), - VMSTATE_UINT32(ssctl[1], stellaris_adc_state), - VMSTATE_UINT32(fifo[2].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[2].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[2], stellaris_adc_state), - VMSTATE_UINT32(ssctl[2], stellaris_adc_state), - VMSTATE_UINT32(fifo[3].state, stellaris_adc_state), - VMSTATE_UINT32_ARRAY(fifo[3].data, stellaris_adc_state, 16), - VMSTATE_UINT32(ssmux[3], stellaris_adc_state), - VMSTATE_UINT32(ssctl[3], stellaris_adc_state), - VMSTATE_UINT32(noise, stellaris_adc_state), + VMSTATE_UINT32(actss, StellarisADCState), + VMSTATE_UINT32(ris, StellarisADCState), + VMSTATE_UINT32(im, StellarisADCState), + VMSTATE_UINT32(emux, StellarisADCState), + VMSTATE_UINT32(ostat, StellarisADCState), + VMSTATE_UINT32(ustat, StellarisADCState), + VMSTATE_UINT32(sspri, StellarisADCState), + VMSTATE_UINT32(sac, StellarisADCState), + VMSTATE_UINT32(fifo[0].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[0].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[0], StellarisADCState), + VMSTATE_UINT32(ssctl[0], StellarisADCState), + VMSTATE_UINT32(fifo[1].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[1].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[1], StellarisADCState), + VMSTATE_UINT32(ssctl[1], StellarisADCState), + VMSTATE_UINT32(fifo[2].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[2].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[2], StellarisADCState), + VMSTATE_UINT32(ssctl[2], StellarisADCState), + VMSTATE_UINT32(fifo[3].state, StellarisADCState), + VMSTATE_UINT32_ARRAY(fifo[3].data, StellarisADCState, 16), + VMSTATE_UINT32(ssmux[3], StellarisADCState), + VMSTATE_UINT32(ssctl[3], StellarisADCState), + VMSTATE_UINT32(noise, StellarisADCState), VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_adc = { static void stellaris_adc_init(Object *obj) { DeviceState *dev = DEVICE(obj); - stellaris_adc_state *s = STELLARIS_ADC(obj); + StellarisADCState *s = STELLARIS_ADC(obj); SysBusDevice *sbd = SYS_BUS_DEVICE(obj); int n; @@ -XXX,XX +XXX,XX @@ static void stellaris_adc_class_init(ObjectClass *klass, void *data) static const TypeInfo stellaris_adc_info = { .name = TYPE_STELLARIS_ADC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(stellaris_adc_state), + .instance_size = sizeof(StellarisADCState), .instance_init = stellaris_adc_init, .class_init = stellaris_adc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The typedef and definitions are generated by the OBJECT_DECLARE_TYPE macro in "hw/arm/bcm2836.h": 20 #define TYPE_BCM283X "bcm283x" 21 OBJECT_DECLARE_TYPE(BCM283XState, BCM283XClass, BCM283X) The script ran in commit a489d1951c ("Use OBJECT_DECLARE_TYPE when possible") missed them because they are declared in a different file unit. Remove them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-10-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/bcm2836.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/bcm2836.c +++ b/hw/arm/bcm2836.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/raspi_platform.h" #include "hw/sysbus.h" -typedef struct BCM283XClass { +struct BCM283XClass { /*< private >*/ DeviceClass parent_class; /*< public >*/ @@ -XXX,XX +XXX,XX @@ typedef struct BCM283XClass { hwaddr peri_base; /* Peripheral base address seen by the CPU */ hwaddr ctrl_base; /* Interrupt controller and mailboxes etc. */ int clusterid; -} BCM283XClass; - -#define BCM283X_CLASS(klass) \ - OBJECT_CLASS_CHECK(BCM283XClass, (klass), TYPE_BCM283X) -#define BCM283X_GET_CLASS(obj) \ - OBJECT_GET_CLASS(BCM283XClass, (obj), TYPE_BCM283X) +}; static Property bcm2836_enabled_cores_property = DEFINE_PROP_UINT32("enabled-cpus", BCM283XState, enabled_cpus, 0); -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> NPCM7XX models have been commited after the conversion from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible"). Manually convert them. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-11-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/adc/npcm7xx_adc.h | 7 +++---- include/hw/arm/npcm7xx.h | 18 ++++++------------ include/hw/i2c/npcm7xx_smbus.h | 7 +++---- include/hw/misc/npcm7xx_clk.h | 2 +- include/hw/misc/npcm7xx_gcr.h | 6 +++--- include/hw/misc/npcm7xx_mft.h | 7 +++---- include/hw/misc/npcm7xx_pwm.h | 3 +-- include/hw/misc/npcm7xx_rng.h | 6 +++--- include/hw/net/npcm7xx_emc.h | 5 +---- include/hw/sd/npcm7xx_sdhci.h | 4 ++-- 10 files changed, 26 insertions(+), 39 deletions(-) diff --git a/include/hw/adc/npcm7xx_adc.h b/include/hw/adc/npcm7xx_adc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/adc/npcm7xx_adc.h +++ b/include/hw/adc/npcm7xx_adc.h @@ -XXX,XX +XXX,XX @@ * @iref: The internal reference voltage, initialized at launch time. * @rv: The calibrated output values of 0.5V and 1.5V for the ADC. */ -typedef struct { +struct NPCM7xxADCState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t iref; uint16_t calibration_r_values[NPCM7XX_ADC_NUM_CALIB]; -} NPCM7xxADCState; +}; #define TYPE_NPCM7XX_ADC "npcm7xx-adc" -#define NPCM7XX_ADC(obj) \ - OBJECT_CHECK(NPCM7xxADCState, (obj), TYPE_NPCM7XX_ADC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxADCState, NPCM7XX_ADC) #endif /* NPCM7XX_ADC_H */ diff --git a/include/hw/arm/npcm7xx.h b/include/hw/arm/npcm7xx.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/npcm7xx.h +++ b/include/hw/arm/npcm7xx.h @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_NR_PWM_MODULES 2 -typedef struct NPCM7xxMachine { +struct NPCM7xxMachine { MachineState parent; /* * PWM fan splitter. each splitter connects to one PWM output and @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachine { */ SplitIRQ fan_splitter[NPCM7XX_NR_PWM_MODULES * NPCM7XX_PWM_PER_MODULE]; -} NPCM7xxMachine; +}; #define TYPE_NPCM7XX_MACHINE MACHINE_TYPE_NAME("npcm7xx") -#define NPCM7XX_MACHINE(obj) \ - OBJECT_CHECK(NPCM7xxMachine, (obj), TYPE_NPCM7XX_MACHINE) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMachine, NPCM7XX_MACHINE) typedef struct NPCM7xxMachineClass { MachineClass parent; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMachineClass { #define NPCM7XX_MACHINE_GET_CLASS(obj) \ OBJECT_GET_CLASS(NPCM7xxMachineClass, (obj), TYPE_NPCM7XX_MACHINE) -typedef struct NPCM7xxState { +struct NPCM7xxState { DeviceState parent; ARMCPU cpu[NPCM7XX_MAX_NUM_CPUS]; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxState { NPCM7xxFIUState fiu[2]; NPCM7xxEMCState emc[2]; NPCM7xxSDHCIState mmc; -} NPCM7xxState; +}; #define TYPE_NPCM7XX "npcm7xx" -#define NPCM7XX(obj) OBJECT_CHECK(NPCM7xxState, (obj), TYPE_NPCM7XX) +OBJECT_DECLARE_TYPE(NPCM7xxState, NPCM7xxClass, NPCM7XX) #define TYPE_NPCM730 "npcm730" #define TYPE_NPCM750 "npcm750" @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxClass { uint32_t num_cpus; } NPCM7xxClass; -#define NPCM7XX_CLASS(klass) \ - OBJECT_CLASS_CHECK(NPCM7xxClass, (klass), TYPE_NPCM7XX) -#define NPCM7XX_GET_CLASS(obj) \ - OBJECT_GET_CLASS(NPCM7xxClass, (obj), TYPE_NPCM7XX) - /** * npcm7xx_load_kernel - Loads memory with everything needed to boot * @machine - The machine containing the SoC to be booted. diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/i2c/npcm7xx_smbus.h +++ b/include/hw/i2c/npcm7xx_smbus.h @@ -XXX,XX +XXX,XX @@ typedef enum NPCM7xxSMBusStatus { * @rx_cur: The current position of rx_fifo. * @status: The current status of the SMBus. */ -typedef struct NPCM7xxSMBusState { +struct NPCM7xxSMBusState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSMBusState { uint8_t rx_cur; NPCM7xxSMBusStatus status; -} NPCM7xxSMBusState; +}; #define TYPE_NPCM7XX_SMBUS "npcm7xx-smbus" -#define NPCM7XX_SMBUS(obj) OBJECT_CHECK(NPCM7xxSMBusState, (obj), \ - TYPE_NPCM7XX_SMBUS) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxSMBusState, NPCM7XX_SMBUS) #endif /* NPCM7XX_SMBUS_H */ diff --git a/include/hw/misc/npcm7xx_clk.h b/include/hw/misc/npcm7xx_clk.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_clk.h +++ b/include/hw/misc/npcm7xx_clk.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxCLKState { }; #define TYPE_NPCM7XX_CLK "npcm7xx-clk" -#define NPCM7XX_CLK(obj) OBJECT_CHECK(NPCM7xxCLKState, (obj), TYPE_NPCM7XX_CLK) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxCLKState, NPCM7XX_CLK) #endif /* NPCM7XX_CLK_H */ diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -XXX,XX +XXX,XX @@ */ #define NPCM7XX_GCR_NR_REGS (0x148 / sizeof(uint32_t)) -typedef struct NPCM7xxGCRState { +struct NPCM7xxGCRState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxGCRState { uint32_t reset_pwron; uint32_t reset_mdlr; uint32_t reset_intcr3; -} NPCM7xxGCRState; +}; #define TYPE_NPCM7XX_GCR "npcm7xx-gcr" -#define NPCM7XX_GCR(obj) OBJECT_CHECK(NPCM7xxGCRState, (obj), TYPE_NPCM7XX_GCR) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxGCRState, NPCM7XX_GCR) #endif /* NPCM7XX_GCR_H */ diff --git a/include/hw/misc/npcm7xx_mft.h b/include/hw/misc/npcm7xx_mft.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_mft.h +++ b/include/hw/misc/npcm7xx_mft.h @@ -XXX,XX +XXX,XX @@ * @max_rpm: The maximum rpm for fans. Order: A0, B0, A1, B1. * @duty: The duty cycles for fans, relative to NPCM7XX_PWM_MAX_DUTY. */ -typedef struct NPCM7xxMFTState { +struct NPCM7xxMFTState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxMFTState { uint32_t max_rpm[NPCM7XX_MFT_FANIN_COUNT]; uint32_t duty[NPCM7XX_MFT_FANIN_COUNT]; -} NPCM7xxMFTState; +}; #define TYPE_NPCM7XX_MFT "npcm7xx-mft" -#define NPCM7XX_MFT(obj) \ - OBJECT_CHECK(NPCM7xxMFTState, (obj), TYPE_NPCM7XX_MFT) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxMFTState, NPCM7XX_MFT) #endif /* NPCM7XX_MFT_H */ diff --git a/include/hw/misc/npcm7xx_pwm.h b/include/hw/misc/npcm7xx_pwm.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_pwm.h +++ b/include/hw/misc/npcm7xx_pwm.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxPWMState { }; #define TYPE_NPCM7XX_PWM "npcm7xx-pwm" -#define NPCM7XX_PWM(obj) \ - OBJECT_CHECK(NPCM7xxPWMState, (obj), TYPE_NPCM7XX_PWM) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxPWMState, NPCM7XX_PWM) #endif /* NPCM7XX_PWM_H */ diff --git a/include/hw/misc/npcm7xx_rng.h b/include/hw/misc/npcm7xx_rng.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_rng.h +++ b/include/hw/misc/npcm7xx_rng.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" -typedef struct NPCM7xxRNGState { +struct NPCM7xxRNGState { SysBusDevice parent; MemoryRegion iomem; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRNGState { uint8_t rngcs; uint8_t rngd; uint8_t rngmode; -} NPCM7xxRNGState; +}; #define TYPE_NPCM7XX_RNG "npcm7xx-rng" -#define NPCM7XX_RNG(obj) OBJECT_CHECK(NPCM7xxRNGState, (obj), TYPE_NPCM7XX_RNG) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxRNGState, NPCM7XX_RNG) #endif /* NPCM7XX_RNG_H */ diff --git a/include/hw/net/npcm7xx_emc.h b/include/hw/net/npcm7xx_emc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/npcm7xx_emc.h +++ b/include/hw/net/npcm7xx_emc.h @@ -XXX,XX +XXX,XX @@ struct NPCM7xxEMCState { bool rx_active; }; -typedef struct NPCM7xxEMCState NPCM7xxEMCState; - #define TYPE_NPCM7XX_EMC "npcm7xx-emc" -#define NPCM7XX_EMC(obj) \ - OBJECT_CHECK(NPCM7xxEMCState, (obj), TYPE_NPCM7XX_EMC) +OBJECT_DECLARE_SIMPLE_TYPE(NPCM7xxEMCState, NPCM7XX_EMC) #endif /* NPCM7XX_EMC_H */ diff --git a/include/hw/sd/npcm7xx_sdhci.h b/include/hw/sd/npcm7xx_sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/npcm7xx_sdhci.h +++ b/include/hw/sd/npcm7xx_sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxRegs { uint32_t boottoctrl; } NPCM7xxRegisters; -typedef struct NPCM7xxSDHCIState { +struct NPCM7xxSDHCIState { SysBusDevice parent; MemoryRegion container; @@ -XXX,XX +XXX,XX @@ typedef struct NPCM7xxSDHCIState { NPCM7xxRegisters regs; SDHCIState sdhci; -} NPCM7xxSDHCIState; +}; #endif /* NPCM7XX_SDHCI_H */ -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> The structure is named SECUREECState. Rename the type accordingly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-12-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "sysemu/runstate.h" -typedef struct { +typedef struct SECUREECState { SysBusDevice parent_obj; MemoryRegion iomem; } SECUREECState; -#define TYPE_SBSA_EC "sbsa-ec" -#define SECURE_EC(obj) OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_EC) +#define TYPE_SBSA_SECURE_EC "sbsa-ec" +#define SBSA_SECURE_EC(obj) \ + OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, @@ -XXX,XX +XXX,XX @@ static uint64_t sbsa_ec_read(void *opaque, hwaddr offset, unsigned size) } static void sbsa_ec_write(void *opaque, hwaddr offset, - uint64_t value, unsigned size) + uint64_t value, unsigned size) { if (offset == 0) { /* PSCI machine power command register */ switch (value) { @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps sbsa_ec_ops = { static void sbsa_ec_init(Object *obj) { - SECUREECState *s = SECURE_EC(obj); + SECUREECState *s = SBSA_SECURE_EC(obj); SysBusDevice *dev = SYS_BUS_DEVICE(obj); memory_region_init_io(&s->iomem, obj, &sbsa_ec_ops, s, "sbsa-ec", @@ -XXX,XX +XXX,XX @@ static void sbsa_ec_class_init(ObjectClass *klass, void *data) } static const TypeInfo sbsa_ec_info = { - .name = TYPE_SBSA_EC, + .name = TYPE_SBSA_SECURE_EC, .parent = TYPE_SYS_BUS_DEVICE, .instance_size = sizeof(SECUREECState), .instance_init = sbsa_ec_init, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This model was merged few days before the QOM cleanup from commit 8063396bf3 ("Use OBJECT_DECLARE_SIMPLE_TYPE when possible") was pulled and merged. Manually adapt. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230109140306.23161-13-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/sbsa_ec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/misc/sbsa_ec.c b/hw/misc/sbsa_ec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/sbsa_ec.c +++ b/hw/misc/sbsa_ec.c @@ -XXX,XX +XXX,XX @@ typedef struct SECUREECState { } SECUREECState; #define TYPE_SBSA_SECURE_EC "sbsa-ec" -#define SBSA_SECURE_EC(obj) \ - OBJECT_CHECK(SECUREECState, (obj), TYPE_SBSA_SECURE_EC) +OBJECT_DECLARE_SIMPLE_TYPE(SECUREECState, SBSA_SECURE_EC) enum sbsa_ec_powerstates { SBSA_EC_CMD_POWEROFF = 0x01, -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/intc/xilinx_intc.c:45:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-14-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/xilinx_intc.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/hw/intc/xilinx_intc.c b/hw/intc/xilinx_intc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xilinx_intc.c +++ b/hw/intc/xilinx_intc.c @@ -XXX,XX +XXX,XX @@ #define R_MAX 8 #define TYPE_XILINX_INTC "xlnx.xps-intc" -DECLARE_INSTANCE_CHECKER(struct xlx_pic, XILINX_INTC, - TYPE_XILINX_INTC) +typedef struct XpsIntc XpsIntc; +DECLARE_INSTANCE_CHECKER(XpsIntc, XILINX_INTC, TYPE_XILINX_INTC) -struct xlx_pic +struct XpsIntc { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct xlx_pic uint32_t irq_pin_state; }; -static void update_irq(struct xlx_pic *p) +static void update_irq(XpsIntc *p) { uint32_t i; @@ -XXX,XX +XXX,XX @@ static void update_irq(struct xlx_pic *p) qemu_set_irq(p->parent_irq, (p->regs[R_MER] & 1) && p->regs[R_IPR]); } -static uint64_t -pic_read(void *opaque, hwaddr addr, unsigned int size) +static uint64_t pic_read(void *opaque, hwaddr addr, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t r = 0; addr >>= 2; @@ -XXX,XX +XXX,XX @@ pic_read(void *opaque, hwaddr addr, unsigned int size) return r; } -static void -pic_write(void *opaque, hwaddr addr, - uint64_t val64, unsigned int size) +static void pic_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; uint32_t value = val64; addr >>= 2; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps pic_ops = { static void irq_handler(void *opaque, int irq, int level) { - struct xlx_pic *p = opaque; + XpsIntc *p = opaque; /* edge triggered interrupt */ if (p->c_kind_of_intr & (1 << irq) && p->regs[R_MER] & 2) { @@ -XXX,XX +XXX,XX @@ static void irq_handler(void *opaque, int irq, int level) static void xilinx_intc_init(Object *obj) { - struct xlx_pic *p = XILINX_INTC(obj); + XpsIntc *p = XILINX_INTC(obj); qdev_init_gpio_in(DEVICE(obj), irq_handler, 32); sysbus_init_irq(SYS_BUS_DEVICE(obj), &p->parent_irq); @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_init(Object *obj) } static Property xilinx_intc_properties[] = { - DEFINE_PROP_UINT32("kind-of-intr", struct xlx_pic, c_kind_of_intr, 0), + DEFINE_PROP_UINT32("kind-of-intr", XpsIntc, c_kind_of_intr, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_intc_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_intc_info = { .name = TYPE_XILINX_INTC, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct xlx_pic), + .instance_size = sizeof(XpsIntc), .instance_init = xilinx_intc_init, .class_init = xilinx_intc_class_init, }; -- 2.34.1 From: Philippe Mathieu-Daudé <philmd@linaro.org> This remove a use of 'struct' in the DECLARE_INSTANCE_CHECKER() macro call, to avoid after a QOM refactor: hw/timer/xilinx_timer.c:65:1: error: declaration of anonymous struct must be a definition DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, ^ Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com> Message-id: 20230109140306.23161-15-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/xilinx_timer.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/xilinx_timer.c +++ b/hw/timer/xilinx_timer.c @@ -XXX,XX +XXX,XX @@ struct xlx_timer }; #define TYPE_XILINX_TIMER "xlnx.xps-timer" -DECLARE_INSTANCE_CHECKER(struct timerblock, XILINX_TIMER, - TYPE_XILINX_TIMER) +typedef struct XpsTimerState XpsTimerState; +DECLARE_INSTANCE_CHECKER(XpsTimerState, XILINX_TIMER, TYPE_XILINX_TIMER) -struct timerblock +struct XpsTimerState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct timerblock struct xlx_timer *timers; }; -static inline unsigned int num_timers(struct timerblock *t) +static inline unsigned int num_timers(XpsTimerState *t) { return 2 - t->one_timer_only; } @@ -XXX,XX +XXX,XX @@ static inline unsigned int timer_from_addr(hwaddr addr) return addr >> 2; } -static void timer_update_irq(struct timerblock *t) +static void timer_update_irq(XpsTimerState *t) { unsigned int i, irq = 0; uint32_t csr; @@ -XXX,XX +XXX,XX @@ static void timer_update_irq(struct timerblock *t) static uint64_t timer_read(void *opaque, hwaddr addr, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; uint32_t r = 0; unsigned int timer; @@ -XXX,XX +XXX,XX @@ static void timer_write(void *opaque, hwaddr addr, uint64_t val64, unsigned int size) { - struct timerblock *t = opaque; + XpsTimerState *t = opaque; struct xlx_timer *xt; unsigned int timer; uint32_t value = val64; @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps timer_ops = { static void timer_hit(void *opaque) { struct xlx_timer *xt = opaque; - struct timerblock *t = xt->parent; + XpsTimerState *t = xt->parent; D(fprintf(stderr, "%s %d\n", __func__, xt->nr)); xt->regs[R_TCSR] |= TCSR_TINT; @@ -XXX,XX +XXX,XX @@ static void timer_hit(void *opaque) static void xilinx_timer_realize(DeviceState *dev, Error **errp) { - struct timerblock *t = XILINX_TIMER(dev); + XpsTimerState *t = XILINX_TIMER(dev); unsigned int i; /* Init all the ptimers. */ @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_realize(DeviceState *dev, Error **errp) static void xilinx_timer_init(Object *obj) { - struct timerblock *t = XILINX_TIMER(obj); + XpsTimerState *t = XILINX_TIMER(obj); /* All timers share a single irq line. */ sysbus_init_irq(SYS_BUS_DEVICE(obj), &t->irq); } static Property xilinx_timer_properties[] = { - DEFINE_PROP_UINT32("clock-frequency", struct timerblock, freq_hz, - 62 * 1000000), - DEFINE_PROP_UINT8("one-timer-only", struct timerblock, one_timer_only, 0), + DEFINE_PROP_UINT32("clock-frequency", XpsTimerState, freq_hz, 62 * 1000000), + DEFINE_PROP_UINT8("one-timer-only", XpsTimerState, one_timer_only, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void xilinx_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo xilinx_timer_info = { .name = TYPE_XILINX_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(struct timerblock), + .instance_size = sizeof(XpsTimerState), .instance_init = xilinx_timer_init, .class_init = xilinx_timer_class_init, }; -- 2.34.1 From: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> ARM trusted firmware, when built with FEAT_HCX support, sets SCR_EL3.HXEn bit to allow EL2 to modify HCRX_EL2 register without trapping it in EL3. Qemu uses a valid mask to clear unsupported SCR_EL3 bits when emulating SCR_EL3 write, and that mask doesn't include SCR_EL3.HXEn bit even if FEAT_HCX is enabled and exposed to the guest. As a result EL3 writes of that bit are ignored. Cc: qemu-stable@nongnu.org Signed-off-by: Evgeny Iakovlev <eiakovlev@linux.microsoft.com> Message-id: 20230105221251.17896-4-eiakovlev@linux.microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) if (cpu_isar_feature(aa64_sme, cpu)) { valid_mask |= SCR_ENTP2; } + if (cpu_isar_feature(aa64_hcx, cpu)) { + valid_mask |= SCR_HXEN; + } } else { valid_mask &= ~(SCR_RW | SCR_ST); if (cpu_isar_feature(aa32_ras, cpu)) { -- 2.34.1 Hi; here's the latest round of arm patches. I have included also my patchset for the RTC devices to avoid keeping time_t and time_t diffs in 32-bit variables. thanks -- PMM The following changes since commit 156618d9ea67f2f2e31d9dedd97f2dcccbe6808c: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-08-30 09:20:27 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230831 for you to fetch changes up to e73b8bb8a3e9a162f70e9ffbf922d4fafc96bbfb: hw/arm: Set number of MPU regions correctly for an505, an521, an524 (2023-08-31 11:07:02 +0100) ---------------------------------------------------------------- target-arm queue: * Some of the preliminary patches for Cortex-A710 support * i.MX7 and i.MX6UL refactoring * Implement SRC device for i.MX7 * Catch illegal-exception-return from EL3 with bad NSE/NS * Use 64-bit offsets for holding time_t differences in RTC devices * Model correct number of MPU regions for an505, an521, an524 boards ---------------------------------------------------------------- Alex Bennée (1): target/arm: properly document FEAT_CRC32 Jean-Christophe Dubois (6): Remove i.MX7 IOMUX GPR device from i.MX6UL Refactor i.MX6UL processor code Add i.MX6UL missing devices. Refactor i.MX7 processor code Add i.MX7 missing TZ devices and memory regions Add i.MX7 SRC device implementation Peter Maydell (8): target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm() hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference rtc: Use time_t for passing and returning time offsets target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties hw/arm: Set number of MPU regions correctly for an505, an521, an524 Richard Henderson (9): target/arm: Reduce dcz_blocksize to uint8_t target/arm: Allow cpu to configure GM blocksize target/arm: Support more GM blocksizes target/arm: When tag memory is not present, set MTE=1 target/arm: Introduce make_ccsidr64 target/arm: Apply access checks to neoverse-n1 special registers target/arm: Apply access checks to neoverse-v1 special registers target/arm: Suppress FEAT_TRBE (Trace Buffer Extension) target/arm: Implement FEAT_HPDS2 as a no-op docs/system/arm/emulation.rst | 2 + include/hw/arm/armsse.h | 5 + include/hw/arm/armv7m.h | 8 + include/hw/arm/fsl-imx6ul.h | 158 ++++++++++++++++--- include/hw/arm/fsl-imx7.h | 338 ++++++++++++++++++++++++++++++----------- include/hw/misc/imx7_src.h | 66 ++++++++ include/hw/rtc/aspeed_rtc.h | 2 +- include/sysemu/rtc.h | 4 +- target/arm/cpregs.h | 2 + target/arm/cpu.h | 5 +- target/arm/internals.h | 6 - target/arm/tcg/translate.h | 2 + hw/arm/armsse.c | 16 ++ hw/arm/armv7m.c | 21 +++ hw/arm/fsl-imx6ul.c | 174 +++++++++++++-------- hw/arm/fsl-imx7.c | 201 +++++++++++++++++++----- hw/arm/mps2-tz.c | 29 ++++ hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++ hw/rtc/aspeed_rtc.c | 5 +- hw/rtc/m48t59.c | 2 +- hw/rtc/twl92230.c | 4 +- softmmu/rtc.c | 4 +- target/arm/cpu.c | 207 ++++++++++++++----------- target/arm/helper.c | 15 +- target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 102 +++++++++---- target/arm/tcg/helper-a64.c | 9 ++ target/arm/tcg/mte_helper.c | 90 ++++++++--- target/arm/tcg/translate-a64.c | 5 +- hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 31 files changed, 1393 insertions(+), 372 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c From: Richard Henderson <richard.henderson@linaro.org> This value is only 4 bits wide. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230811214031.171020-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool prop_lpa2; /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ - uint32_t dcz_blocksize; + uint8_t dcz_blocksize; + uint64_t rvbar_prop; /* Property/input signals. */ /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we hard-coded the blocksize with GMID_EL1_BS. But the value we choose for -cpu max does not match the value that cortex-a710 uses. Mirror the way we handle dcz_blocksize. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230811214031.171020-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 6 ----- target/arm/tcg/translate.h | 2 ++ target/arm/helper.c | 11 +++++--- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/mte_helper.c | 46 ++++++++++++++++++++++------------ target/arm/tcg/translate-a64.c | 5 ++-- 7 files changed, 45 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint8_t dcz_blocksize; + /* GM blocksize, in log_2(words), ie low 4 bits of GMID_EL0 */ + uint8_t gm_blocksize; uint64_t rvbar_prop; /* Property/input signals. */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs); #endif /* !CONFIG_USER_ONLY */ -/* - * The log2 of the words in the tag block, for GMID_EL1.BS. - * The is the maximum, 256 bytes, which manipulates 64-bits of tags. - */ -#define GMID_EL1_BS 6 - /* * SVE predicates are 1/8 the size of SVE vectors, and cannot use * the same simd_desc() encoding due to restrictions on size. diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.h +++ b/target/arm/tcg/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int8_t btype; /* A copy of cpu->dcz_blocksize. */ uint8_t dcz_blocksize; + /* A copy of cpu->gm_blocksize. */ + uint8_t gm_blocksize; /* True if this page is guarded. */ bool guarded_page; /* Bottom two bits of XScale c15_cpar coprocessor access control reg */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, .access = PL1_RW, .accessfn = access_mte, .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, - { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, - .access = PL1_R, .accessfn = access_aa64_tid5, - .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, { .name = "TCO", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, .type = ARM_CP_NO_RAW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * then define only a RAZ/WI version of PSTATE.TCO. */ if (cpu_isar_feature(aa64_mte, cpu)) { + ARMCPRegInfo gmid_reginfo = { + .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL1_R, .accessfn = access_aa64_tid5, + .type = ARM_CP_CONST, .resetvalue = cpu->gm_blocksize, + }; + define_one_arm_cp_reg(cpu, &gmid_reginfo); define_arm_cp_regs(cpu, mte_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + cpu->gm_blocksize = 6; /* 256 bytes */ cpu->sve_vq.supported = MAKE_64BIT_MASK(0, ARM_MAX_VQ); cpu->sme_vq.supported = SVE_VQ_POW2_MAP; diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(st2g_stub)(CPUARMState *env, uint64_t ptr) } } -#define LDGM_STGM_SIZE (4 << GMID_EL1_BS) - uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_LOAD, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* The tag is squashed to zero if the page does not support tags. */ if (!tag_mem) { return 0; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are loading 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - return ldq_le_p(tag_mem); + switch (gm_bs) { + case 6: + /* 256 bytes -> 16 tags -> 64 result bits */ + return ldq_le_p(tag_mem); + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_STORE, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* * Tag store only happens if the page support tags, @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are storing 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - stq_le_p(tag_mem, val); + switch (gm_bs) { + case 6: + stq_le_p(tag_mem, val); + break; + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STGM(DisasContext *s, arg_ldst_tag *a) gen_helper_stgm(cpu_env, addr, tcg_rt); } else { MMUAccessType acc = MMU_DATA_STORE; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static bool trans_LDGM(DisasContext *s, arg_ldst_tag *a) gen_helper_ldgm(tcg_rt, cpu_env, addr); } else { MMUAccessType acc = MMU_DATA_LOAD; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->cp_regs = arm_cpu->cp_regs; dc->features = env->features; dc->dcz_blocksize = arm_cpu->dcz_blocksize; + dc->gm_blocksize = arm_cpu->gm_blocksize; #ifdef CONFIG_USER_ONLY /* In sve_probe_page, we assume TBI is enabled. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Support all of the easy GM block sizes. Use direct memory operations, since the pointers are aligned. While BS=2 (16 bytes, 1 tag) is a legal setting, that requires an atomic store of one nibble. This is not difficult, but there is also no point in supporting it until required. Note that cortex-a710 sets GM blocksize to match its cacheline size of 64 bytes. I expect many implementations will also match the cacheline, which makes 16 bytes very unlikely. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 18 +++++++++--- target/arm/tcg/mte_helper.c | 56 +++++++++++++++++++++++++++++++------ 2 files changed, 62 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) ID_PFR1, VIRTUALIZATION, 0); } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* + * The architectural range of GM blocksize is 2-6, however qemu + * doesn't support blocksize of 2 (see HELPER(ldgm)). + */ + if (tcg_enabled()) { + assert(cpu->gm_blocksize >= 3 && cpu->gm_blocksize <= 6); + } + #ifndef CONFIG_USER_ONLY - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) { /* * Disable the MTE feature bits if we do not have tag-memory * provided by the machine. */ - cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); - } + if (cpu->tag_memory == NULL) { + cpu->isar.id_aa64pfr1 = + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + } #endif + } if (tcg_enabled()) { /* diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + uint64_t ret; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) /* * The ordering of elements within the word corresponds to - * a little-endian operation. + * a little-endian operation. Computation of shift comes from + * + * index = address<LOG2_TAG_GRANULE+3:LOG2_TAG_GRANULE> + * data<index*4+3:index*4> = tag + * + * Because of the alignment of ptr above, BS=6 has shift=0. + * All memory operations are aligned. Defer support for BS=2, + * requiring insertion or extraction of a nibble, until we + * support a cpu that requires it. */ switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + ret = *(uint8_t *)tag_mem; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + ret = cpu_to_le16(*(uint16_t *)tag_mem); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + ret = cpu_to_le32(*(uint32_t *)tag_mem); + break; case 6: /* 256 bytes -> 16 tags -> 64 result bits */ - return ldq_le_p(tag_mem); + return cpu_to_le64(*(uint64_t *)tag_mem); default: - /* cpu configured with unsupported gm blocksize. */ + /* + * CPU configured with unsupported/invalid gm blocksize. + * This is detected early in arm_cpu_realizefn. + */ g_assert_not_reached(); } + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + return ret << shift; } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - /* - * The ordering of elements within the word corresponds to - * a little-endian operation. - */ + /* See LDGM for comments on BS and on shift. */ + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + val >>= shift; switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + *(uint8_t *)tag_mem = val; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + *(uint16_t *)tag_mem = cpu_to_le16(val); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + *(uint32_t *)tag_mem = cpu_to_le32(val); + break; case 6: - stq_le_p(tag_mem, val); + /* 256 bytes -> 16 tags -> 64 result bits */ + *(uint64_t *)tag_mem = cpu_to_le64(val); break; default: /* cpu configured with unsupported gm blocksize. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When the cpu support MTE, but the system does not, reduce cpu support to user instructions at EL0 instead of completely disabling MTE. If we encounter a cpu implementation which does something else, we can revisit this setting. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) #ifndef CONFIG_USER_ONLY /* - * Disable the MTE feature bits if we do not have tag-memory - * provided by the machine. + * If we do not have tag-memory provided by the machine, + * reduce MTE support to instructions enabled at EL0. + * This matches Cortex-A710 BROADCASTMTE input being LOW. */ if (cpu->tag_memory == NULL) { cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 1); } #endif } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Do not hard-code the constants for Neoverse V1. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 48 ++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" +#include "qemu/units.h" #include "internals.h" #include "cpregs.h" +static uint64_t make_ccsidr64(unsigned assoc, unsigned linesize, + unsigned cachesize) +{ + unsigned lg_linesize = ctz32(linesize); + unsigned sets; + + /* + * The 64-bit CCSIDR_EL1 format is: + * [55:32] number of sets - 1 + * [23:3] associativity - 1 + * [2:0] log2(linesize) - 4 + * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc + */ + assert(assoc != 0); + assert(is_power_of_2(linesize)); + assert(lg_linesize >= 4 && lg_linesize <= 7 + 4); + + /* sets * associativity * linesize == cachesize. */ + sets = cachesize / (assoc * linesize); + assert(cachesize % (assoc * linesize) == 0); + + return ((uint64_t)(sets - 1) << 32) + | ((assoc - 1) << 3) + | (lg_linesize - 4); +} + static void aarch64_a35_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_neoverse_v1_initfn(Object *obj) * The Neoverse-V1 r1p2 TRM lists 32-bit format CCSIDR_EL1 values, * but also says it implements CCIDX, which means they should be * 64-bit format. So we here use values which are based on the textual - * information in chapter 2 of the TRM (and on the fact that - * sets * associativity * linesize == cachesize). - * - * The 64-bit CCSIDR_EL1 format is: - * [55:32] number of sets - 1 - * [23:3] associativity - 1 - * [2:0] log2(linesize) - 4 - * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc - * - * L1: 4-way set associative 64-byte line size, total size 64K, - * so sets is 256. + * information in chapter 2 of the TRM: * + * L1: 4-way set associative 64-byte line size, total size 64K. * L2: 8-way set associative, 64 byte line size, either 512K or 1MB. - * We pick 1MB, so this has 2048 sets. - * * L3: No L3 (this matches the CLIDR_EL1 value). */ - cpu->ccsidr[0] = 0x000000ff0000001aull; /* 64KB L1 dcache */ - cpu->ccsidr[1] = 0x000000ff0000001aull; /* 64KB L1 icache */ - cpu->ccsidr[2] = 0x000007ff0000003aull; /* 1MB L2 cache */ + cpu->ccsidr[0] = make_ccsidr64(4, 64, 64 * KiB); /* L1 dcache */ + cpu->ccsidr[1] = cpu->ccsidr[0]; /* L1 icache */ + cpu->ccsidr[2] = make_ccsidr64(8, 64, 1 * MiB); /* L2 cache */ /* From 3.2.115 SCTLR_EL3 */ cpu->reset_sctlr = 0x30c50838; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Access to many of the special registers is enabled or disabled by ACTLR_EL[23], which we implement as constant 0, which means that all writes outside EL3 should trap. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 2 ++ target/arm/helper.c | 4 ++-- target/arm/tcg/cpu64.c | 46 +++++++++++++++++++++++++++++++++--------- 3 files changed, 41 insertions(+), 11 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +CPAccessResult access_tvm_trvm(CPUARMState *, const ARMCPRegInfo *, bool); + #endif /* TARGET_ARM_CPREGS_H */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, } /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ -static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) +CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) { if (arm_current_el(env) == 1) { uint64_t trap = isread ? HCR_TRVM : HCR_TVM; diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a64fx_initfn(Object *obj) /* TODO: Add A64FX specific HPC extension registers */ } +static CPAccessResult access_actlr_w(CPUARMState *env, const ARMCPRegInfo *r, + bool read) +{ + if (!read) { + int el = arm_current_el(env); + + /* Because ACTLR_EL2 is constant 0, writes below EL2 trap to EL2. */ + if (el < 2 && arm_is_el2_enabled(env)) { + return CP_ACCESS_TRAP_EL2; + } + /* Because ACTLR_EL3 is constant 0, writes below EL3 trap to EL3. */ + if (el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + return CP_ACCESS_TRAP_EL3; + } + } + return CP_ACCESS_OK; +} + static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { { .name = "ATCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 7, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + /* Traps and enables are the same as for TCR_EL1. */ + .accessfn = access_tvm_trvm, .fgt = FGT_TCR_EL1, }, { .name = "ATCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 15, .crm = 7, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR3_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, /* * Report CPUCFR_EL1.SCU as 1, as we do not implement the DSU * (and in particular its system registers). @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 4 }, { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 4, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010, + .accessfn = access_actlr_w }, { .name = "CPUPCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 8, .opc2 = 1, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUPWRCTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCDN_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCTL_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGF_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, }; static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> There is only one additional EL1 register modeled, which also needs to use access_actlr_w. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) static const ARMCPRegInfo neoverse_v1_cp_reginfo[] = { { .name = "CPUECTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 5, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUPPMCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 2, .opc2 = 0, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing external to the cpu, which is out of scope for QEMU. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* FEAT_SPE (Statistical Profiling Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, PMSVER, 0); + /* FEAT_TRBE (Trace Buffer Extension) */ + cpu->isar.id_aa64dfr0 = + FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEBUFFER, 0); /* FEAT_TRF (Self-hosted Trace Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEFILT, 0); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This feature allows the operating system to set TCR_ELx.HWU* to allow the implementation to use the PBHA bits from the block and page descriptors for for IMPLEMENTATION DEFINED purposes. Since QEMU has no need to use these bits, we may simply ignore them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HAFDBS (Hardware management of the access flag and dirty bit state) - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) +- FEAT_HPDS2 (Translation table page-based hardware attributes) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR1, HAFDBS, 2); /* FEAT_HAFDBS */ t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 3); /* FEAT_PAN3 */ t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> This is a mandatory feature for Armv8.1 architectures but we don't state the feature clearly in our emulation list. Also include FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org Cc: qemu-stable@nongnu.org Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org> [PMM: pluralize 'instructions' in docs] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CRC32 (CRC32 instructions) - FEAT_CSV2 (Cache speculation variant 2) - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ - t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); /* FEAT_CRC32 */ t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> i.MX7 IOMUX GPR device is not equivalent to i.MX6UL IOMUXC GPR device. In particular, register 22 is not present on i.MX6UL and this is actualy The only register that is really emulated in the i.MX7 IOMUX GPR device. Note: The i.MX6UL code is actually also implementing the IOMUX GPR device as an unimplemented device at the same bus adress and the 2 instantiations were actualy colliding. So we go back to the unimplemented device for now. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 48681bf51ee97646479bb261bee19abebbc8074e.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 -- hw/arm/fsl-imx6ul.c | 11 ----------- 2 files changed, 13 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx6ul_ccm.h" #include "hw/misc/imx6_src.h" #include "hw/misc/imx7_snvs.h" -#include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX6SRCState src; IMX7SNVSState snvs; IMXGPCv2State gpcv2; - IMX7GPRState gpr; IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); - /* - * GPR - */ - object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); - /* * GPIOs 1 to 5 */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOGn_IRQ[i])); } - /* - * GPR - */ - sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); - /* * SDMA */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for most i.MX6UL devices in i.MX6UL header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: d579043fbd4e4b490370783fda43fc02c8e9be75.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 156 +++++++++++++++++++++++++++++++----- hw/arm/fsl-imx6ul.c | 147 ++++++++++++++++++++++----------- 2 files changed, 232 insertions(+), 71 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX6UL "fsl-imx6ul" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX6ULState, FSL_IMX6UL) @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_ADCS = 2, FSL_IMX6UL_NUM_USB_PHYS = 2, FSL_IMX6UL_NUM_USBS = 2, + FSL_IMX6UL_NUM_SAIS = 3, + FSL_IMX6UL_NUM_CANS = 2, + FSL_IMX6UL_NUM_PWMS = 4, }; struct FslIMX6ULState { @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { enum FslIMX6ULMemoryMap { FSL_IMX6UL_MMDC_ADDR = 0x80000000, - FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX6UL_MMDC_SIZE = (2 * GiB), FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, - FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, - FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, - FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, - FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_MEM_SIZE = (256 * MiB), - /* AIPS-2 */ + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_ALIAS_SIZE = (128 * MiB), + + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_EIM_CS_SIZE = (128 * MiB), + + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_AES_ENCRYPT_SIZE = (1 * MiB), + + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_RX_SIZE = (32 * MiB), + + /* AIPS-2 Begin */ FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, FSL_IMX6UL_UART4_ADDR = 0x021F0000, FSL_IMX6UL_UART3_ADDR = 0x021EC000, FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_QSPI_SIZE = 0x500, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CTRL_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_CMP_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_SYS_CNT_RD_SIZE = (16 * KiB), + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_TZASC_SIZE = (16 * KiB), + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_PXP_SIZE = (16 * KiB), + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSI_SIZE = 0x100, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_CSU_SIZE = (16 * KiB), + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_OCOTP_CTRL_SIZE = (4 * KiB), + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_EIM_SIZE = 0x100, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_MMDC_CFG_SIZE = (4 * KiB), + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_ROMCP_SIZE = 0x300, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, FSL_IMX6UL_I2C2_ADDR = 0x021A4000, FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_ADCn_SIZE = 0x100, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, FSL_IMX6UL_USDHC1_ADDR = 0x02190000, - FSL_IMX6UL_SIM1_ADDR = 0x0218C000, - FSL_IMX6UL_ENET1_ADDR = 0x02188000, - FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, - FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, - FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, - FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, - FSL_IMX6UL_CAAM_ADDR = 0x02140000, - FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, - /* AIPS-1 */ + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_SIMn_SIZE = (16 * KiB), + + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB1_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_USB2_ADDR = 0x02184200, + + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_USBO2_PL301_SIZE = (16 * KiB), + + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_AIPS2_CFG_SIZE = 0x100, + + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_CAAM_SIZE = (16 * KiB), + + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + FSL_IMX6UL_A7MPCORE_DAP_SIZE = (4 * KiB), + /* AIPS-2 End */ + + /* AIPS-1 Begin */ FSL_IMX6UL_PWM8_ADDR = 0x020FC000, FSL_IMX6UL_PWM7_ADDR = 0x020F8000, FSL_IMX6UL_PWM6_ADDR = 0x020F4000, FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_SDMA_SIZE = 0x300, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_GPR_SIZE = 0x40, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_IOMUXC_SIZE = 0x700, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_USBPHY2_ADDR = 0x020CA000, - FSL_IMX6UL_USBPHY2_SIZE = (4 * 1024), FSL_IMX6UL_USBPHY1_ADDR = 0x020C9000, - FSL_IMX6UL_USBPHY1_SIZE = (4 * 1024), + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_ANALOG_SIZE = 0x300, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_KPP_SIZE = 0x10, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_SNVS_LP_SIZE = (16 * KiB), + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_CANn_SIZE = (4 * KiB), + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, FSL_IMX6UL_PWM3_ADDR = 0x02088000, FSL_IMX6UL_PWM2_ADDR = 0x02084000, FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_PWMn_SIZE = 0x20, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_AIPS1_CFG_SIZE = (16 * KiB), + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_BEE_SIZE = (16 * KiB), + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_TOUCH_CTRL_SIZE = 0x100, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_SPBA_SIZE = 0x100, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_ASRC_SIZE = 0x100, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, FSL_IMX6UL_SAI2_ADDR = 0x0202C000, FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_SAIn_SIZE = 0x200, + FSL_IMX6UL_UART8_ADDR = 0x02024000, FSL_IMX6UL_UART1_ADDR = 0x02020000, FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + FSL_IMX6UL_SPDIF_SIZE = 0x100, + /* AIPS-1 End */ + + FSL_IMX6UL_BCH_ADDR = 0x01808000, + FSL_IMX6UL_BCH_SIZE = 0x200, + + FSL_IMX6UL_GPMI_ADDR = 0x01806000, + FSL_IMX6UL_GPMI_SIZE = 0x200, FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, - FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + FSL_IMX6UL_APBH_DMA_SIZE = (4 * KiB), FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, - FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = (384 * KiB), + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, - FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_OCRAM_MEM_SIZE = (128 * KiB), + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, - FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_CAAM_MEM_SIZE = (32 * KiB), + FSL_IMX6UL_ROM_ADDR = 0x00000000, - FSL_IMX6UL_ROM_SIZE = 0x00018000, + FSL_IMX6UL_ROM_SIZE = (96 * KiB), }; enum FslIMX6ULIRQs { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * GPIOs 1 to 5 + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { snprintf(name, NAME_SIZE, "epit%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * eCSPI + * eCSPIs */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { snprintf(name, NAME_SIZE, "usbphy%d", i); object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); } + + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX6UL_A7MPCORE_DAP_SIZE); /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * GPIO + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * IOMUXC and IOMUXC_GPR + * IOMUXC */ - for (i = 0; i < 1; i++) { - static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { - FSL_IMX6UL_IOMUXC_ADDR, - FSL_IMX6UL_IOMUXC_GPR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); - } + create_unimplemented_device("iomuxc", FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_gpr", FSL_IMX6UL_IOMUXC_GPR_ADDR, + FSL_IMX6UL_IOMUXC_GPR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { FSL_IMX6UL_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENETn_TIMER_IRQ[i])); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { + static const hwaddr + FSL_IMX6UL_USB_PHYn_ADDR[FSL_IMX6UL_NUM_USB_PHYS] = { + FSL_IMX6UL_USBPHY1_ADDR, + FSL_IMX6UL_USBPHY2_ADDR, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, - FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000); + FSL_IMX6UL_USB_PHYn_ADDR[i]); } + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { + static const hwaddr FSL_IMX6UL_USB02_USBn_ADDR[FSL_IMX6UL_NUM_USBS] = { + FSL_IMX6UL_USBO2_USB1_ADDR, + FSL_IMX6UL_USBO2_USB2_ADDR, + }; + static const int FSL_IMX6UL_USBn_IRQ[] = { FSL_IMX6UL_USB1_IRQ, FSL_IMX6UL_USB2_IRQ, }; + sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, - FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200); + FSL_IMX6UL_USB02_USBn_ADDR[i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX6UL_USBn_IRQ[i])); } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { FSL_IMX6UL_WDOG1_IRQ, FSL_IMX6UL_WDOG2_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * SDMA */ - create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, + FSL_IMX6UL_SDMA_SIZE); /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000); - create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000); - create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_SAIS; i++) { + static const hwaddr FSL_IMX6UL_SAIn_ADDR[FSL_IMX6UL_NUM_SAIS] = { + FSL_IMX6UL_SAI1_ADDR, + FSL_IMX6UL_SAI2_ADDR, + FSL_IMX6UL_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX6UL_SAIn_ADDR[i], + FSL_IMX6UL_SAIn_SIZE); + } /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000); - create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000); - create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000); - create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_PWMS; i++) { + static const hwaddr FSL_IMX6UL_PWMn_ADDR[FSL_IMX6UL_NUM_PWMS] = { + FSL_IMX6UL_PWM1_ADDR, + FSL_IMX6UL_PWM2_ADDR, + FSL_IMX6UL_PWM3_ADDR, + FSL_IMX6UL_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX6UL_PWMn_ADDR[i], + FSL_IMX6UL_PWMn_SIZE); + } /* * Audio ASRC (asynchronous sample rate converter) */ - create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000); + create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, + FSL_IMX6UL_ASRC_SIZE); /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000); - create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_CANS; i++) { + static const hwaddr FSL_IMX6UL_CANn_ADDR[FSL_IMX6UL_NUM_CANS] = { + FSL_IMX6UL_CAN1_ADDR, + FSL_IMX6UL_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX6UL_CANn_ADDR[i], + FSL_IMX6UL_CANn_SIZE); + } /* * APHB_DMA @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) }; snprintf(name, NAME_SIZE, "adc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], + FSL_IMX6UL_ADCn_SIZE); } /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, + FSL_IMX6UL_LCDIF_SIZE); /* * ROM memory -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add 4 missing PWM devices Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 59e4dc56e14eccfefd379275ec19048dff9c10b3.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 +- hw/arm/fsl-imx6ul.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_USBS = 2, FSL_IMX6UL_NUM_SAIS = 3, FSL_IMX6UL_NUM_CANS = 2, - FSL_IMX6UL_NUM_PWMS = 4, + FSL_IMX6UL_NUM_PWMS = 8, }; struct FslIMX6ULState { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_PWM2_ADDR, FSL_IMX6UL_PWM3_ADDR, FSL_IMX6UL_PWM4_ADDR, + FSL_IMX6UL_PWM5_ADDR, + FSL_IMX6UL_PWM6_ADDR, + FSL_IMX6UL_PWM7_ADDR, + FSL_IMX6UL_PWM8_ADDR, }; snprintf(name, NAME_SIZE, "pwm%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, FSL_IMX6UL_LCDIF_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX6UL_CSU_ADDR, + FSL_IMX6UL_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX6UL_TZASC_ADDR, + FSL_IMX6UL_TZASC_SIZE); + /* * ROM memory */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for all i.MX7 devices in i.MX7 header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 59e195d33e4d486a8d131392acd46633c8c10ed7.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 330 ++++++++++++++++++++++++++++---------- hw/arm/fsl-imx7.c | 130 ++++++++++----- 2 files changed, 335 insertions(+), 125 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" -#include "hw/misc/imx6_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ #include "hw/usb/chipidea.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX7 "fsl-imx7" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX7State, FSL_IMX7) @@ -XXX,XX +XXX,XX @@ enum FslIMX7Configuration { FSL_IMX7_NUM_ECSPIS = 4, FSL_IMX7_NUM_USBS = 3, FSL_IMX7_NUM_ADCS = 2, + FSL_IMX7_NUM_SAIS = 3, + FSL_IMX7_NUM_CANS = 2, + FSL_IMX7_NUM_PWMS = 4, }; struct FslIMX7State { @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { enum FslIMX7MemoryMap { FSL_IMX7_MMDC_ADDR = 0x80000000, - FSL_IMX7_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX7_MMDC_SIZE = (2 * GiB), - FSL_IMX7_GPIO1_ADDR = 0x30200000, - FSL_IMX7_GPIO2_ADDR = 0x30210000, - FSL_IMX7_GPIO3_ADDR = 0x30220000, - FSL_IMX7_GPIO4_ADDR = 0x30230000, - FSL_IMX7_GPIO5_ADDR = 0x30240000, - FSL_IMX7_GPIO6_ADDR = 0x30250000, - FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX7_QSPI1_MEM_SIZE = (256 * MiB), - FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + FSL_IMX7_PCIE1_MEM_ADDR = 0x40000000, + FSL_IMX7_PCIE1_MEM_SIZE = (256 * MiB), - FSL_IMX7_WDOG1_ADDR = 0x30280000, - FSL_IMX7_WDOG2_ADDR = 0x30290000, - FSL_IMX7_WDOG3_ADDR = 0x302A0000, - FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_QSPI1_RX_BUF_ADDR = 0x34000000, + FSL_IMX7_QSPI1_RX_BUF_SIZE = (32 * MiB), - FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + /* PCIe Peripherals */ + FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_GPT1_ADDR = 0x302D0000, - FSL_IMX7_GPT2_ADDR = 0x302E0000, - FSL_IMX7_GPT3_ADDR = 0x302F0000, - FSL_IMX7_GPT4_ADDR = 0x30300000, + /* MMAP Peripherals */ + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x8000, - FSL_IMX7_IOMUXC_ADDR = 0x30330000, - FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, - FSL_IMX7_IOMUXCn_SIZE = 0x1000, + /* GPV configuration */ + FSL_IMX7_GPV6_ADDR = 0x32600000, + FSL_IMX7_GPV5_ADDR = 0x32500000, + FSL_IMX7_GPV4_ADDR = 0x32400000, + FSL_IMX7_GPV3_ADDR = 0x32300000, + FSL_IMX7_GPV2_ADDR = 0x32200000, + FSL_IMX7_GPV1_ADDR = 0x32100000, + FSL_IMX7_GPV0_ADDR = 0x32000000, + FSL_IMX7_GPVn_SIZE = (1 * MiB), - FSL_IMX7_OCOTP_ADDR = 0x30350000, - FSL_IMX7_OCOTP_SIZE = 0x10000, + /* Arm Peripherals */ + FSL_IMX7_A7MPCORE_ADDR = 0x31000000, - FSL_IMX7_ANALOG_ADDR = 0x30360000, - FSL_IMX7_SNVS_ADDR = 0x30370000, - FSL_IMX7_CCM_ADDR = 0x30380000, + /* AIPS-3 Begin */ - FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = 0x1000, + FSL_IMX7_ENET2_ADDR = 0x30BF0000, + FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ADC1_ADDR = 0x30610000, - FSL_IMX7_ADC2_ADDR = 0x30620000, - FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_SDMA_ADDR = 0x30BD0000, + FSL_IMX7_SDMA_SIZE = (4 * KiB), - FSL_IMX7_PWM1_ADDR = 0x30660000, - FSL_IMX7_PWM2_ADDR = 0x30670000, - FSL_IMX7_PWM3_ADDR = 0x30680000, - FSL_IMX7_PWM4_ADDR = 0x30690000, - FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_EIM_ADDR = 0x30BC0000, + FSL_IMX7_EIM_SIZE = (4 * KiB), - FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, - FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_QSPI_ADDR = 0x30BB0000, + FSL_IMX7_QSPI_SIZE = 0x8000, - FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_SIM2_ADDR = 0x30BA0000, + FSL_IMX7_SIM1_ADDR = 0x30B90000, + FSL_IMX7_SIMn_SIZE = (4 * KiB), + + FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_USDHC2_ADDR = 0x30B50000, + FSL_IMX7_USDHC1_ADDR = 0x30B40000, + + FSL_IMX7_USB3_ADDR = 0x30B30000, + FSL_IMX7_USBMISC3_ADDR = 0x30B30200, + FSL_IMX7_USB2_ADDR = 0x30B20000, + FSL_IMX7_USBMISC2_ADDR = 0x30B20200, + FSL_IMX7_USB1_ADDR = 0x30B10000, + FSL_IMX7_USBMISC1_ADDR = 0x30B10200, + FSL_IMX7_USBMISCn_SIZE = 0x200, + + FSL_IMX7_USB_PL301_ADDR = 0x30AD0000, + FSL_IMX7_USB_PL301_SIZE = (64 * KiB), + + FSL_IMX7_SEMAPHORE_HS_ADDR = 0x30AC0000, + FSL_IMX7_SEMAPHORE_HS_SIZE = (64 * KiB), + + FSL_IMX7_MUB_ADDR = 0x30AB0000, + FSL_IMX7_MUA_ADDR = 0x30AA0000, + FSL_IMX7_MUn_SIZE = (KiB), + + FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART6_ADDR = 0x30A80000, + FSL_IMX7_UART5_ADDR = 0x30A70000, + FSL_IMX7_UART4_ADDR = 0x30A60000, + + FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_I2C3_ADDR = 0x30A40000, + FSL_IMX7_I2C2_ADDR = 0x30A30000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, + + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CANn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS3_CONF_ADDR = 0x309F0000, + FSL_IMX7_AIPS3_CONF_SIZE = (64 * KiB), FSL_IMX7_CAAM_ADDR = 0x30900000, - FSL_IMX7_CAAM_SIZE = 0x40000, + FSL_IMX7_CAAM_SIZE = (256 * KiB), - FSL_IMX7_CAN1_ADDR = 0x30A00000, - FSL_IMX7_CAN2_ADDR = 0x30A10000, - FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_SPBA_ADDR = 0x308F0000, + FSL_IMX7_SPBA_SIZE = (4 * KiB), - FSL_IMX7_I2C1_ADDR = 0x30A20000, - FSL_IMX7_I2C2_ADDR = 0x30A30000, - FSL_IMX7_I2C3_ADDR = 0x30A40000, - FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_SAI3_ADDR = 0x308C0000, + FSL_IMX7_SAI2_ADDR = 0x308B0000, + FSL_IMX7_SAI1_ADDR = 0x308A0000, + FSL_IMX7_SAIn_SIZE = (4 * KiB), - FSL_IMX7_ECSPI1_ADDR = 0x30820000, - FSL_IMX7_ECSPI2_ADDR = 0x30830000, - FSL_IMX7_ECSPI3_ADDR = 0x30840000, - FSL_IMX7_ECSPI4_ADDR = 0x30630000, - - FSL_IMX7_LCDIF_ADDR = 0x30730000, - FSL_IMX7_LCDIF_SIZE = 0x1000, - - FSL_IMX7_UART1_ADDR = 0x30860000, + FSL_IMX7_UART3_ADDR = 0x30880000, /* * Some versions of the reference manual claim that UART2 is @ * 0x30870000, but experiments with HW + DT files in upstream @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { * actually located @ 0x30890000 */ FSL_IMX7_UART2_ADDR = 0x30890000, - FSL_IMX7_UART3_ADDR = 0x30880000, - FSL_IMX7_UART4_ADDR = 0x30A60000, - FSL_IMX7_UART5_ADDR = 0x30A70000, - FSL_IMX7_UART6_ADDR = 0x30A80000, - FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART1_ADDR = 0x30860000, - FSL_IMX7_SAI1_ADDR = 0x308A0000, - FSL_IMX7_SAI2_ADDR = 0x308B0000, - FSL_IMX7_SAI3_ADDR = 0x308C0000, - FSL_IMX7_SAIn_SIZE = 0x10000, + FSL_IMX7_ECSPI3_ADDR = 0x30840000, + FSL_IMX7_ECSPI2_ADDR = 0x30830000, + FSL_IMX7_ECSPI1_ADDR = 0x30820000, + FSL_IMX7_ECSPIn_SIZE = (4 * KiB), - FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ENET2_ADDR = 0x30BF0000, + /* AIPS-3 End */ - FSL_IMX7_USB1_ADDR = 0x30B10000, - FSL_IMX7_USBMISC1_ADDR = 0x30B10200, - FSL_IMX7_USB2_ADDR = 0x30B20000, - FSL_IMX7_USBMISC2_ADDR = 0x30B20200, - FSL_IMX7_USB3_ADDR = 0x30B30000, - FSL_IMX7_USBMISC3_ADDR = 0x30B30200, - FSL_IMX7_USBMISCn_SIZE = 0x200, + /* AIPS-2 Begin */ - FSL_IMX7_USDHC1_ADDR = 0x30B40000, - FSL_IMX7_USDHC2_ADDR = 0x30B50000, - FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_AXI_DEBUG_MON_ADDR = 0x307E0000, + FSL_IMX7_AXI_DEBUG_MON_SIZE = (64 * KiB), - FSL_IMX7_SDMA_ADDR = 0x30BD0000, - FSL_IMX7_SDMA_SIZE = 0x1000, + FSL_IMX7_PERFMON2_ADDR = 0x307D0000, + FSL_IMX7_PERFMON1_ADDR = 0x307C0000, + FSL_IMX7_PERFMONn_SIZE = (64 * KiB), + + FSL_IMX7_DDRC_ADDR = 0x307A0000, + FSL_IMX7_DDRC_SIZE = (4 * KiB), + + FSL_IMX7_DDRC_PHY_ADDR = 0x30790000, + FSL_IMX7_DDRC_PHY_SIZE = (4 * KiB), + + FSL_IMX7_TZASC_ADDR = 0x30780000, + FSL_IMX7_TZASC_SIZE = (64 * KiB), + + FSL_IMX7_MIPI_DSI_ADDR = 0x30760000, + FSL_IMX7_MIPI_DSI_SIZE = (4 * KiB), + + FSL_IMX7_MIPI_CSI_ADDR = 0x30750000, + FSL_IMX7_MIPI_CSI_SIZE = 0x4000, + + FSL_IMX7_LCDIF_ADDR = 0x30730000, + FSL_IMX7_LCDIF_SIZE = 0x8000, + + FSL_IMX7_CSI_ADDR = 0x30710000, + FSL_IMX7_CSI_SIZE = (4 * KiB), + + FSL_IMX7_PXP_ADDR = 0x30700000, + FSL_IMX7_PXP_SIZE = 0x4000, + + FSL_IMX7_EPDC_ADDR = 0x306F0000, + FSL_IMX7_EPDC_SIZE = (4 * KiB), + + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = (4 * KiB), + + FSL_IMX7_SYSCNT_CTRL_ADDR = 0x306C0000, + FSL_IMX7_SYSCNT_CMP_ADDR = 0x306B0000, + FSL_IMX7_SYSCNT_RD_ADDR = 0x306A0000, + + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWMn_SIZE = (4 * KiB), + + FSL_IMX7_FlEXTIMER2_ADDR = 0x30650000, + FSL_IMX7_FlEXTIMER1_ADDR = 0x30640000, + FSL_IMX7_FLEXTIMERn_SIZE = (4 * KiB), + + FSL_IMX7_ECSPI4_ADDR = 0x30630000, + + FSL_IMX7_ADC2_ADDR = 0x30620000, + FSL_IMX7_ADC1_ADDR = 0x30610000, + FSL_IMX7_ADCn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS2_CONF_ADDR = 0x305F0000, + FSL_IMX7_AIPS2_CONF_SIZE = (64 * KiB), + + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + + FSL_IMX7_CSU_ADDR = 0x303E0000, + FSL_IMX7_CSU_SIZE = (64 * KiB), + + FSL_IMX7_RDC_ADDR = 0x303D0000, + FSL_IMX7_RDC_SIZE = (4 * KiB), + + FSL_IMX7_SEMAPHORE2_ADDR = 0x303C0000, + FSL_IMX7_SEMAPHORE1_ADDR = 0x303B0000, + FSL_IMX7_SEMAPHOREn_SIZE = (4 * KiB), + + FSL_IMX7_GPC_ADDR = 0x303A0000, + + FSL_IMX7_SRC_ADDR = 0x30390000, + FSL_IMX7_SRC_SIZE = (4 * KiB), + + FSL_IMX7_CCM_ADDR = 0x30380000, + + FSL_IMX7_SNVS_HP_ADDR = 0x30370000, + + FSL_IMX7_ANALOG_ADDR = 0x30360000, + + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + + FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, + FSL_IMX7_IOMUXC_GPR_SIZE = (4 * KiB), + + FSL_IMX7_IOMUXC_ADDR = 0x30330000, + FSL_IMX7_IOMUXC_SIZE = (4 * KiB), + + FSL_IMX7_KPP_ADDR = 0x30320000, + FSL_IMX7_KPP_SIZE = (4 * KiB), + + FSL_IMX7_ROMCP_ADDR = 0x30310000, + FSL_IMX7_ROMCP_SIZE = (4 * KiB), + + FSL_IMX7_GPT4_ADDR = 0x30300000, + FSL_IMX7_GPT3_ADDR = 0x302F0000, + FSL_IMX7_GPT2_ADDR = 0x302E0000, + FSL_IMX7_GPT1_ADDR = 0x302D0000, + + FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + FSL_IMX7_IOMUXC_LPSR_SIZE = (4 * KiB), + + FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_WDOG3_ADDR = 0x302A0000, + FSL_IMX7_WDOG2_ADDR = 0x30290000, + FSL_IMX7_WDOG1_ADDR = 0x30280000, + + FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + + FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_GPIO6_ADDR = 0x30250000, + FSL_IMX7_GPIO5_ADDR = 0x30240000, + FSL_IMX7_GPIO4_ADDR = 0x30230000, + FSL_IMX7_GPIO3_ADDR = 0x30220000, + FSL_IMX7_GPIO2_ADDR = 0x30210000, + FSL_IMX7_GPIO1_ADDR = 0x30200000, + + FSL_IMX7_AIPS1_CONF_ADDR = 0x301F0000, + FSL_IMX7_AIPS1_CONF_SIZE = (64 * KiB), - FSL_IMX7_A7MPCORE_ADDR = 0x31000000, FSL_IMX7_A7MPCORE_DAP_ADDR = 0x30000000, + FSL_IMX7_A7MPCORE_DAP_SIZE = (1 * MiB), - FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, + /* AIPS-1 End */ - FSL_IMX7_GPR_ADDR = 0x30340000, + FSL_IMX7_EIM_CS0_ADDR = 0x28000000, + FSL_IMX7_EIM_CS0_SIZE = (128 * MiB), - FSL_IMX7_DMA_APBH_ADDR = 0x33000000, - FSL_IMX7_DMA_APBH_SIZE = 0x2000, + FSL_IMX7_OCRAM_PXP_ADDR = 0x00940000, + FSL_IMX7_OCRAM_PXP_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_EPDC_ADDR = 0x00920000, + FSL_IMX7_OCRAM_EPDC_SIZE = (128 * KiB), + + FSL_IMX7_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX7_OCRAM_MEM_SIZE = (128 * KiB), + + FSL_IMX7_TCMU_ADDR = 0x00800000, + FSL_IMX7_TCMU_SIZE = (32 * KiB), + + FSL_IMX7_TCML_ADDR = 0x007F8000, + FSL_IMX7_TCML_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_S_ADDR = 0x00180000, + FSL_IMX7_OCRAM_S_SIZE = (32 * KiB), + + FSL_IMX7_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX7_CAAM_MEM_SIZE = (32 * KiB), + + FSL_IMX7_ROM_ADDR = 0x00000000, + FSL_IMX7_ROM_SIZE = (96 * KiB), }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) char name[NAME_SIZE]; int i; + /* + * CPUs + */ for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX7_NUM_CPUS); i++) { snprintf(name, NAME_SIZE, "cpu%d", i); object_initialize_child(obj, name, &s->cpu[i], @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) TYPE_A15MPCORE_PRIV); /* - * GPIOs 1 to 7 + * GPIOs */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } - + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); + /* + * PCIE + */ object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) return; } + /* + * CPUs + */ for (i = 0; i < smp_cpus; i++) { o = OBJECT(&s->cpu[i]); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX7_A7MPCORE_DAP_SIZE); /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPTn_IRQ[i])); } + /* + * GPIOs + */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = { FSL_IMX7_GPIO1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * IOMUXC and IOMUXC_LPSR */ - for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) { - static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = { - FSL_IMX7_IOMUXC_ADDR, - FSL_IMX7_IOMUXC_LPSR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i], - FSL_IMX7_IOMUXCn_SIZE); - } + create_unimplemented_device("iomuxc", FSL_IMX7_IOMUXC_ADDR, + FSL_IMX7_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_lspr", FSL_IMX7_IOMUXC_LPSR_ADDR, + FSL_IMX7_IOMUXC_LPSR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = { FSL_IMX7_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_SPIn_IRQ[i])); } + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = { FSL_IMX7_I2C1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * SNVS */ sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_HP_ADDR); /* * SRC @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_PWMS; i++) { + static const hwaddr FSL_IMX7_PWMn_ADDR[FSL_IMX7_NUM_PWMS] = { + FSL_IMX7_PWM1_ADDR, + FSL_IMX7_PWM2_ADDR, + FSL_IMX7_PWM3_ADDR, + FSL_IMX7_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX7_PWMn_ADDR[i], + FSL_IMX7_PWMn_SIZE); + } /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); - create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_CANS; i++) { + static const hwaddr FSL_IMX7_CANn_ADDR[FSL_IMX7_NUM_CANS] = { + FSL_IMX7_CAN1_ADDR, + FSL_IMX7_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX7_CANn_ADDR[i], + FSL_IMX7_CANn_SIZE); + } /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX7_SAI1_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI2_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI3_ADDR, FSL_IMX7_SAIn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_SAIS; i++) { + static const hwaddr FSL_IMX7_SAIn_ADDR[FSL_IMX7_NUM_SAIS] = { + FSL_IMX7_SAI1_ADDR, + FSL_IMX7_SAI2_ADDR, + FSL_IMX7_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX7_SAIn_ADDR[i], + FSL_IMX7_SAIn_SIZE); + } /* * OCOTP @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, FSL_IMX7_OCOTP_SIZE); + /* + * GPR + */ sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_IOMUXC_GPR_ADDR); + /* + * PCIE + */ sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ); sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq); - + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = { FSL_IMX7_USBMISC1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add various memory segments - OCRAM - OCRAM EPDC - OCRAM PXP - OCRAM S - ROM - CAAM Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: f887a3483996ba06d40bd62ffdfb0ecf68621987.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 7 +++++ hw/arm/fsl-imx7.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7GPRState gpr; ChipideaState usb[FSL_IMX7_NUM_USBS]; DesignwarePCIEHost pcie; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_epdc; + MemoryRegion ocram_pxp; + MemoryRegion ocram_s; + uint32_t phy_num[FSL_IMX7_NUM_ETHS]; bool phy_connected[FSL_IMX7_NUM_ETHS]; }; diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX7_CSU_ADDR, + FSL_IMX7_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX7_TZASC_ADDR, + FSL_IMX7_TZASC_SIZE); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx7.ocram", + FSL_IMX7_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * OCRAM EPDC memory + */ + memory_region_init_ram(&s->ocram_epdc, NULL, "imx7.ocram_epdc", + FSL_IMX7_OCRAM_EPDC_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_EPDC_ADDR, + &s->ocram_epdc); + + /* + * OCRAM PXP memory + */ + memory_region_init_ram(&s->ocram_pxp, NULL, "imx7.ocram_pxp", + FSL_IMX7_OCRAM_PXP_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_PXP_ADDR, + &s->ocram_pxp); + + /* + * OCRAM_S memory + */ + memory_region_init_ram(&s->ocram_s, NULL, "imx7.ocram_s", + FSL_IMX7_OCRAM_S_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_S_ADDR, + &s->ocram_s); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, OBJECT(dev), "imx7.rom", + FSL_IMX7_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, OBJECT(dev), "imx7.caam", + FSL_IMX7_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_CAAM_MEM_ADDR, + &s->caam); } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The SRC device is normally used to start the secondary CPU. When running Linux directly, QEMU is emulating a PSCI interface that UBOOT is installing at boot time and therefore the fact that the SRC device is unimplemented is hidden as Qemu respond directly to PSCI requets without using the SRC device. But if you try to run a more bare metal application (maybe uboot itself), then it is not possible to start the secondary CPU as the SRC is an unimplemented device. This patch adds the ability to start the secondary CPU through the SRC device so that you can use this feature in bare metal applications. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +- include/hw/misc/imx7_src.h | 66 +++++++++ hw/arm/fsl-imx7.c | 8 +- hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 6 files changed, 356 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" +#include "hw/misc/imx7_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7CCMState ccm; IMX7AnalogState analog; IMX7SNVSState snvs; + IMX7SRCState src; IMXGPCv2State gpcv2; IMXSPIState spi[FSL_IMX7_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX7_NUM_I2CS]; @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = (4 * KiB), FSL_IMX7_CCM_ADDR = 0x30380000, diff --git a/include/hw/misc/imx7_src.h b/include/hw/misc/imx7_src.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_src.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (C) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SRC_H +#define IMX7_SRC_H + +#include "hw/sysbus.h" +#include "qemu/bitops.h" +#include "qom/object.h" + +#define SRC_SCR 0 +#define SRC_A7RCR0 1 +#define SRC_A7RCR1 2 +#define SRC_M4RCR 3 +#define SRC_ERCR 5 +#define SRC_HSICPHY_RCR 7 +#define SRC_USBOPHY1_RCR 8 +#define SRC_USBOPHY2_RCR 9 +#define SRC_MPIPHY_RCR 10 +#define SRC_PCIEPHY_RCR 11 +#define SRC_SBMR1 22 +#define SRC_SRSR 23 +#define SRC_SISR 26 +#define SRC_SIMR 27 +#define SRC_SBMR2 28 +#define SRC_GPR1 29 +#define SRC_GPR2 30 +#define SRC_GPR3 31 +#define SRC_GPR4 32 +#define SRC_GPR5 33 +#define SRC_GPR6 34 +#define SRC_GPR7 35 +#define SRC_GPR8 36 +#define SRC_GPR9 37 +#define SRC_GPR10 38 +#define SRC_MAX 39 + +/* SRC_A7SCR1 */ +#define R_CORE1_ENABLE_SHIFT 1 +#define R_CORE1_ENABLE_LENGTH 1 +/* SRC_A7SCR0 */ +#define R_CORE1_RST_SHIFT 5 +#define R_CORE1_RST_LENGTH 1 +#define R_CORE0_RST_SHIFT 4 +#define R_CORE0_RST_LENGTH 1 + +#define TYPE_IMX7_SRC "imx7.src" +OBJECT_DECLARE_SIMPLE_TYPE(IMX7SRCState, IMX7_SRC) + +struct IMX7SRCState { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t regs[SRC_MAX]; +}; + +#endif /* IMX7_SRC_H */ diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * SRC + */ + object_initialize_child(obj, "src", &s->src, TYPE_IMX7_SRC); + /* * ECSPIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * SRC */ - create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX7_SRC_ADDR); /* * Watchdogs diff --git a/hw/misc/imx7_src.c b/hw/misc/imx7_src.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_src.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_src.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" +#include "qemu/module.h" +#include "target/arm/arm-powerctl.h" +#include "hw/core/cpu.h" +#include "hw/registerfields.h" + +#include "trace.h" + +static const char *imx7_src_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case SRC_SCR: + return "SRC_SCR"; + case SRC_A7RCR0: + return "SRC_A7RCR0"; + case SRC_A7RCR1: + return "SRC_A7RCR1"; + case SRC_M4RCR: + return "SRC_M4RCR"; + case SRC_ERCR: + return "SRC_ERCR"; + case SRC_HSICPHY_RCR: + return "SRC_HSICPHY_RCR"; + case SRC_USBOPHY1_RCR: + return "SRC_USBOPHY1_RCR"; + case SRC_USBOPHY2_RCR: + return "SRC_USBOPHY2_RCR"; + case SRC_PCIEPHY_RCR: + return "SRC_PCIEPHY_RCR"; + case SRC_SBMR1: + return "SRC_SBMR1"; + case SRC_SRSR: + return "SRC_SRSR"; + case SRC_SISR: + return "SRC_SISR"; + case SRC_SIMR: + return "SRC_SIMR"; + case SRC_SBMR2: + return "SRC_SBMR2"; + case SRC_GPR1: + return "SRC_GPR1"; + case SRC_GPR2: + return "SRC_GPR2"; + case SRC_GPR3: + return "SRC_GPR3"; + case SRC_GPR4: + return "SRC_GPR4"; + case SRC_GPR5: + return "SRC_GPR5"; + case SRC_GPR6: + return "SRC_GPR6"; + case SRC_GPR7: + return "SRC_GPR7"; + case SRC_GPR8: + return "SRC_GPR8"; + case SRC_GPR9: + return "SRC_GPR9"; + case SRC_GPR10: + return "SRC_GPR10"; + default: + sprintf(unknown, "%u ?", reg); + return unknown; + } +} + +static const VMStateDescription vmstate_imx7_src = { + .name = TYPE_IMX7_SRC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_src_reset(DeviceState *dev) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + /* Set reset values */ + s->regs[SRC_SCR] = 0xA0; + s->regs[SRC_SRSR] = 0x1; + s->regs[SRC_SIMR] = 0x1F; +} + +static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + + if (index < SRC_MAX) { + value = s->regs[index]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + } + + trace_imx7_src_read(imx7_src_reg_name(index), value); + + return value; +} + + +/* + * The reset is asynchronous so we need to defer clearing the reset + * bit until the work is completed. + */ + +struct SRCSCRResetInfo { + IMX7SRCState *s; + uint32_t reset_bit; +}; + +static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) +{ + struct SRCSCRResetInfo *ri = data.host_ptr; + IMX7SRCState *s = ri->s; + + assert(qemu_mutex_iothread_locked()); + + s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + g_free(ri); +} + +static void imx7_defer_clear_reset_bit(uint32_t cpuid, + IMX7SRCState *s, + uint32_t reset_shift) +{ + struct SRCSCRResetInfo *ri; + CPUState *cpu = arm_get_cpu_by_id(cpuid); + + if (!cpu) { + return; + } + + ri = g_new(struct SRCSCRResetInfo, 1); + ri->s = s; + ri->reset_bit = reset_shift; + + async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); +} + + +static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + long unsigned int change_mask; + uint32_t current_value = value; + + if (index >= SRC_MAX) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + return; + } + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + change_mask = s->regs[index] ^ (uint32_t)current_value; + + switch (index) { + case SRC_A7RCR0: + if (FIELD_EX32(change_mask, CORE0, RST)) { + arm_reset_cpu(0); + imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); + } + if (FIELD_EX32(change_mask, CORE1, RST)) { + arm_reset_cpu(1); + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + } + s->regs[index] = current_value; + break; + case SRC_A7RCR1: + /* + * On real hardware when the system reset controller starts a + * secondary CPU it runs through some boot ROM code which reads + * the SRC_GPRX registers controlling the start address and branches + * to it. + * Here we are taking a short cut and branching directly to the + * requested address (we don't want to run the boot ROM code inside + * QEMU) + */ + if (FIELD_EX32(change_mask, CORE1, ENABLE)) { + if (FIELD_EX32(current_value, CORE1, ENABLE)) { + /* CORE 1 is brought up */ + arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], + 3, false); + } else { + /* CORE 1 is shut down */ + arm_set_cpu_off(1); + } + /* We clear the reset bits as the processor changed state */ + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + clear_bit(R_CORE1_RST_SHIFT, &change_mask); + } + s->regs[index] = current_value; + break; + default: + s->regs[index] = current_value; + break; + } +} + +static const struct MemoryRegionOps imx7_src_ops = { + .read = imx7_src_read, + .write = imx7_src_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_src_realize(DeviceState *dev, Error **errp) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, + TYPE_IMX7_SRC, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); +} + +static void imx7_src_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx7_src_realize; + dc->reset = imx7_src_reset; + dc->vmsd = &vmstate_imx7_src; + dc->desc = "i.MX6 System Reset Controller"; +} + +static const TypeInfo imx7_src_info = { + .name = TYPE_IMX7_SRC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SRCState), + .class_init = imx7_src_class_init, +}; + +static void imx7_src_register_types(void) +{ + type_register_static(&imx7_src_info); +} + +type_init(imx7_src_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( 'imx6_src.c', 'imx6ul_ccm.c', 'imx7_ccm.c', + 'imx7_src.c', 'imx7_gpr.c', 'imx7_snvs.c', 'imx_ccm.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d" ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +# imx7_src.c +imx7_src_read(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +imx7_src_write(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 + # iotkit-sysinfo.c iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.34.1 The architecture requires (R_TYTWB) that an attempt to return from EL3 when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This enforces that the CPU can't ever be executing below EL3 with the NSE,NS bits indicating an invalid security state.) We were missing this check; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230807150618.101357-1-peter.maydell@linaro.org --- target/arm/tcg/helper-a64.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) spsr &= ~PSTATE_SS; } + /* + * FEAT_RME forbids return from EL3 with an invalid security state. + * We don't need an explicit check for FEAT_RME here because we enforce + * in scr_write() that you can't set the NSE bit without it. + */ + if (cur_el == 3 && (env->cp15.scr_el3 & (SCR_NS | SCR_NSE)) == SCR_NSE) { + goto illegal_return; + } + new_el = el_from_spsr(spsr); if (new_el == -1) { goto illegal_return; -- 2.34.1 In the m48t59 device we almost always use 64-bit arithmetic when dealing with time_t deltas. The one exception is in set_alarm(), which currently uses a plain 'int' to hold the difference between two time_t values. Switch to int64_t instead to avoid any possible overflow issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/m48t59.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/rtc/m48t59.c b/hw/rtc/m48t59.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/m48t59.c +++ b/hw/rtc/m48t59.c @@ -XXX,XX +XXX,XX @@ static void alarm_cb (void *opaque) static void set_alarm(M48t59State *NVRAM) { - int diff; + int64_t diff; if (NVRAM->alrm_timer != NULL) { timer_del(NVRAM->alrm_timer); diff = qemu_timedate_diff(&NVRAM->alarm) - NVRAM->time_offset; -- 2.34.1 In the twl92230 device, use int64_t for the two state fields sec_offset and alm_sec, because we set these to values that are either time_t or differences between two time_t values. These fields aren't saved in vmstate anywhere, so we can safely widen them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/twl92230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/rtc/twl92230.c b/hw/rtc/twl92230.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/twl92230.c +++ b/hw/rtc/twl92230.c @@ -XXX,XX +XXX,XX @@ struct MenelausState { struct tm tm; struct tm new; struct tm alm; - int sec_offset; - int alm_sec; + int64_t sec_offset; + int64_t alm_sec; int next_comp; } rtc; uint16_t rtc_next_vmstate; -- 2.34.1 In the aspeed_rtc device we store a difference between two time_t values in an 'int'. This is not really correct when time_t could be 64 bits. Enlarge the field to 'int64_t'. This is a migration compatibility break for the aspeed boards. While we are changing the vmstate, remove the accidental duplicate of the offset field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> --- include/hw/rtc/aspeed_rtc.h | 2 +- hw/rtc/aspeed_rtc.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/hw/rtc/aspeed_rtc.h b/include/hw/rtc/aspeed_rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/rtc/aspeed_rtc.h +++ b/include/hw/rtc/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ struct AspeedRtcState { qemu_irq irq; uint32_t reg[0x18]; - int offset; + int64_t offset; }; diff --git a/hw/rtc/aspeed_rtc.c b/hw/rtc/aspeed_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/aspeed_rtc.c +++ b/hw/rtc/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_rtc_ops = { static const VMStateDescription vmstate_aspeed_rtc = { .name = TYPE_ASPEED_RTC, - .version_id = 1, + .version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), - VMSTATE_INT32(offset, AspeedRtcState), - VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT64(offset, AspeedRtcState), VMSTATE_END_OF_LIST() } }; -- 2.34.1 The functions qemu_get_timedate() and qemu_timedate_diff() take and return a time offset as an integer. Coverity points out that means that when an RTC device implementation holds an offset as a time_t, as the m48t59 does, the time_t will get truncated. (CID 1507157, 1517772). The functions work with time_t internally, so make them use that type in their APIs. Note that this won't help any Y2038 issues where either the device model itself is keeping the offset in a 32-bit integer, or where the hardware under emulation has Y2038 or other rollover problems. If we missed any cases of the former then hopefully Coverity will warn us about them since after this patch we'd be truncating a time_t in assignments from qemu_timedate_diff().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- include/sysemu/rtc.h | 4 ++-- softmmu/rtc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sysemu/rtc.h b/include/sysemu/rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/rtc.h +++ b/include/sysemu/rtc.h @@ -XXX,XX +XXX,XX @@ * The behaviour of the clock whose value this function returns will * depend on the -rtc command line option passed by the user. */ -void qemu_get_timedate(struct tm *tm, int offset); +void qemu_get_timedate(struct tm *tm, time_t offset); /** * qemu_timedate_diff: Return difference between a struct tm and the RTC @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset); * a timestamp one hour further ahead than the current RTC time * then this function will return 3600. */ -int qemu_timedate_diff(struct tm *tm); +time_t qemu_timedate_diff(struct tm *tm); #endif diff --git a/softmmu/rtc.c b/softmmu/rtc.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/rtc.c +++ b/softmmu/rtc.c @@ -XXX,XX +XXX,XX @@ static time_t qemu_ref_timedate(QEMUClockType clock) return value; } -void qemu_get_timedate(struct tm *tm, int offset) +void qemu_get_timedate(struct tm *tm, time_t offset) { time_t ti = qemu_ref_timedate(rtc_clock); @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset) } } -int qemu_timedate_diff(struct tm *tm) +time_t qemu_timedate_diff(struct tm *tm) { time_t seconds; -- 2.34.1 Where architecturally one ARM_FEATURE_X flag implies another ARM_FEATURE_Y, we allow the CPU init function to only set X, and then set Y for it. Currently we do this in two places -- we set a few flags in arm_cpu_post_init() because we need them to decide which properties to create on the CPU object, and then we do the rest in arm_cpu_realizefn(). However, this is fragile, because it's easy to add a new property and not notice that this means that an X-implies-Y check now has to move from realize to post-init. As a specific example, the pmsav7-dregion property is conditional on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and rely on V8-implies-V7, which doesn't happen until the realizefn. Move all of these X-implies-Y checks into a new function, which we call at the top of arm_cpu_post_init(), so the feature bits are available at that point. This does now give us the reverse issue, that if there's a feature bit which is enabled or disabled by the setting of a property then then X-implies-Y features that are dependent on that property need to be in realize, not in this new function. But the only one of those is the "EL3 implies VBAR" which is already in the right place, so putting things this way round seems better to me. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org --- target/arm/cpu.c | 179 +++++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 82 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ unsigned int gt_cntfrq_period_ns(ARMCPU *cpu) NANOSECONDS_PER_SECOND / cpu->gt_cntfrq_hz : 1; } +static void arm_cpu_propagate_feature_implications(ARMCPU *cpu) +{ + CPUARMState *env = &cpu->env; + bool no_aa32 = false; + + /* + * Some features automatically imply others: set the feature + * bits explicitly for these cases. + */ + + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_PMSA); + } + + if (arm_feature(env, ARM_FEATURE_V8)) { + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V7); + } else { + set_feature(env, ARM_FEATURE_V7VE); + } + } + + /* + * There exist AArch64 cpus without AArch32 support. When KVM + * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. + * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. + * As a general principle, we also do not make ID register + * consistency checks anywhere unless using TCG, because only + * for TCG would a consistency-check failure be a QEMU bug. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); + } + + if (arm_feature(env, ARM_FEATURE_V7VE)) { + /* + * v7 Virtualization Extensions. In real hardware this implies + * EL2 and also the presence of the Security Extensions. + * For QEMU, for backwards-compatibility we implement some + * CPUs or CPU configs which have no actual EL2 or EL3 but do + * include the various other features that V7VE implies. + * Presence of EL2 itself is ARM_FEATURE_EL2, and of the + * Security Extensions is ARM_FEATURE_EL3. + */ + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_arm_div, cpu)); + set_feature(env, ARM_FEATURE_LPAE); + set_feature(env, ARM_FEATURE_V7); + } + if (arm_feature(env, ARM_FEATURE_V7)) { + set_feature(env, ARM_FEATURE_VAPA); + set_feature(env, ARM_FEATURE_THUMB2); + set_feature(env, ARM_FEATURE_MPIDR); + if (!arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V6K); + } else { + set_feature(env, ARM_FEATURE_V6); + } + + /* + * Always define VBAR for V7 CPUs even if it doesn't exist in + * non-EL3 configs. This is needed by some legacy boards. + */ + set_feature(env, ARM_FEATURE_VBAR); + } + if (arm_feature(env, ARM_FEATURE_V6K)) { + set_feature(env, ARM_FEATURE_V6); + set_feature(env, ARM_FEATURE_MVFR); + } + if (arm_feature(env, ARM_FEATURE_V6)) { + set_feature(env, ARM_FEATURE_V5); + if (!arm_feature(env, ARM_FEATURE_M)) { + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_jazelle, cpu)); + set_feature(env, ARM_FEATURE_AUXCR); + } + } + if (arm_feature(env, ARM_FEATURE_V5)) { + set_feature(env, ARM_FEATURE_V4T); + } + if (arm_feature(env, ARM_FEATURE_LPAE)) { + set_feature(env, ARM_FEATURE_V7MP); + } + if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { + set_feature(env, ARM_FEATURE_CBAR); + } + if (arm_feature(env, ARM_FEATURE_THUMB2) && + !arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_THUMB_DSP); + } +} + void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - /* M profile implies PMSA. We have to do this here rather than - * in realize with the other feature-implication checks because - * we look at the PMSA bit to see if we should add some properties. + /* + * Some features imply others. Figure this out now, because we + * are going to look at the feature bits in deciding which + * properties to add. */ - if (arm_feature(&cpu->env, ARM_FEATURE_M)) { - set_feature(&cpu->env, ARM_FEATURE_PMSA); - } + arm_cpu_propagate_feature_implications(cpu); if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) CPUARMState *env = &cpu->env; int pagebits; Error *local_err = NULL; - bool no_aa32 = false; /* Use pc-relative instructions in system-mode */ #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->isar.id_isar3 = u; } - /* Some features automatically imply others: */ - if (arm_feature(env, ARM_FEATURE_V8)) { - if (arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V7); - } else { - set_feature(env, ARM_FEATURE_V7VE); - } - } - - /* - * There exist AArch64 cpus without AArch32 support. When KVM - * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. - * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. - * As a general principle, we also do not make ID register - * consistency checks anywhere unless using TCG, because only - * for TCG would a consistency-check failure be a QEMU bug. - */ - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { - no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); - } - - if (arm_feature(env, ARM_FEATURE_V7VE)) { - /* v7 Virtualization Extensions. In real hardware this implies - * EL2 and also the presence of the Security Extensions. - * For QEMU, for backwards-compatibility we implement some - * CPUs or CPU configs which have no actual EL2 or EL3 but do - * include the various other features that V7VE implies. - * Presence of EL2 itself is ARM_FEATURE_EL2, and of the - * Security Extensions is ARM_FEATURE_EL3. - */ - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_arm_div, cpu)); - set_feature(env, ARM_FEATURE_LPAE); - set_feature(env, ARM_FEATURE_V7); - } - if (arm_feature(env, ARM_FEATURE_V7)) { - set_feature(env, ARM_FEATURE_VAPA); - set_feature(env, ARM_FEATURE_THUMB2); - set_feature(env, ARM_FEATURE_MPIDR); - if (!arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V6K); - } else { - set_feature(env, ARM_FEATURE_V6); - } - - /* Always define VBAR for V7 CPUs even if it doesn't exist in - * non-EL3 configs. This is needed by some legacy boards. - */ - set_feature(env, ARM_FEATURE_VBAR); - } - if (arm_feature(env, ARM_FEATURE_V6K)) { - set_feature(env, ARM_FEATURE_V6); - set_feature(env, ARM_FEATURE_MVFR); - } - if (arm_feature(env, ARM_FEATURE_V6)) { - set_feature(env, ARM_FEATURE_V5); - if (!arm_feature(env, ARM_FEATURE_M)) { - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_jazelle, cpu)); - set_feature(env, ARM_FEATURE_AUXCR); - } - } - if (arm_feature(env, ARM_FEATURE_V5)) { - set_feature(env, ARM_FEATURE_V4T); - } - if (arm_feature(env, ARM_FEATURE_LPAE)) { - set_feature(env, ARM_FEATURE_V7MP); - } - if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { - set_feature(env, ARM_FEATURE_CBAR); - } - if (arm_feature(env, ARM_FEATURE_THUMB2) && - !arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_THUMB_DSP); - } /* * We rely on no XScale CPU having VFP so we can use the same bits in the -- 2.34.1 M-profile CPUs generally allow configuration of the number of MPU regions that they have. We don't currently model this, so our implementations of some of the board models provide CPUs with the wrong number of regions. RTOSes like Zephyr that hardcode the expected number of regions may therefore not run on the model if they are set up to run on real hardware. Add properties mpu-ns-regions and mpu-s-regions to the ARMV7M object, matching the ability of hardware to configure the number of Secure and NonSecure regions separately. Our actual CPU implementation doesn't currently support that, and it happens that none of the MPS boards we model set the number of regions differently for Secure vs NonSecure, so we provide an interface to the boards and SoCs that won't need to change if we ever do add that functionality in future, but make it an error to configure the two properties to different values. (The property name on the CPU is the somewhat misnamed-for-M-profile "pmsav7-dregion", so we don't follow that naming convention for the properties here. The TRM doesn't say what the CPU configuration variable names are, so we pick something, and follow the lowercase convention we already have for properties here.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-3-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 8 ++++++++ hw/arm/armv7m.c | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ARMv7MState, ARMV7M) * + Property "vfp": enable VFP (forwarded to CPU object) * + Property "dsp": enable DSP (forwarded to CPU object) * + Property "enable-bitband": expose bitbanded IO + * + Property "mpu-ns-regions": number of Non-Secure MPU regions (forwarded + * to CPU object pmsav7-dregion property; default is whatever the default + * for the CPU is) + * + Property "mpu-s-regions": number of Secure MPU regions (default is + * whatever the default for the CPU is; must currently be set to the same + * value as mpu-ns-regions if the CPU implements the Security Extension) * + Clock input "refclk" is the external reference clock for the systick timers * + Clock input "cpuclk" is the main CPU clock */ @@ -XXX,XX +XXX,XX @@ struct ARMv7MState { Object *idau; uint32_t init_svtor; uint32_t init_nsvtor; + uint32_t mpu_ns_regions; + uint32_t mpu_s_regions; bool enable_bitband; bool start_powered_off; bool vfp; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) } } + /* + * Real M-profile hardware can be configured with a different number of + * MPU regions for Secure vs NonSecure. QEMU's CPU implementation doesn't + * support that yet, so catch attempts to select that. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + s->mpu_ns_regions != s->mpu_s_regions) { + error_setg(errp, + "mpu-ns-regions and mpu-s-regions properties must have the same value"); + return; + } + if (s->mpu_ns_regions != UINT_MAX && + object_property_find(OBJECT(s->cpu), "pmsav7-dregion")) { + if (!object_property_set_uint(OBJECT(s->cpu), "pmsav7-dregion", + s->mpu_ns_regions, errp)) { + return; + } + } + /* * Tell the CPU where the NVIC is; it will fail realize if it doesn't * have one. Similarly, tell the NVIC where its CPU is. @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { false), DEFINE_PROP_BOOL("vfp", ARMv7MState, vfp, true), DEFINE_PROP_BOOL("dsp", ARMv7MState, dsp, true), + DEFINE_PROP_UINT32("mpu-ns-regions", ARMv7MState, mpu_ns_regions, UINT_MAX), + DEFINE_PROP_UINT32("mpu-s-regions", ARMv7MState, mpu_s_regions, UINT_MAX), DEFINE_PROP_END_OF_LIST(), }; -- 2.34.1 The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The MPS2/MPS3 FPGA images don't override these except in the case of AN547, which uses 16 MPU regions. Define properties on the ARMSSE object for the MPU regions (using the same names as the documented RTL configuration settings, and following the pattern we already have for this device of using all-caps names as the RTL does), and set them in the board code. We don't actually need to override the default except on AN547, but it's simpler code to have the board code set them always rather than tracking which board subtypes want to set them to a non-default value separately from what that value is. Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524 we now correctly use 8 MPU regions, while mps3-an547 stays at its current 16 regions. It's possible some guest code wrongly depended on the previous incorrectly modeled number of memory regions. (Such guest code should ideally check the number of regions via the MPU_TYPE register.) The old behaviour can be obtained with additional -global arguments to QEMU: For mps2-an521 and mps2-an524: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16 For mps2-an505: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 NB that the way the implementation allows this use of -global is slightly fragile: if the board code explicitly sets the properties on the sse-200 object, this overrides the -global command line option. So we rely on: - the boards that need fixing all happen to use the SSE defaults - we can write the board code to only set the property if it is different from the default, rather than having all boards explicitly set the property - the board that does need to use a non-default value happens to need to set it to the same value (16) we previously used This works, but there are some kinds of refactoring of the mps2-tz.c code that would break the support for -global here. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 5 +++++ hw/arm/armsse.c | 16 ++++++++++++++++ hw/arm/mps2-tz.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an * SSE-200 both are present; CPU0 in an SSE-200 has neither. * Since the IoTKit has only one CPU, it does not have the CPU1_* properties. + * + QOM properties "CPU0_MPU_NS", "CPU0_MPU_S", "CPU1_MPU_NS" and "CPU1_MPU_S" + * which set the number of MPU regions on the CPUs. If there is only one + * CPU the CPU1 properties are not present. * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, * which are wired to its NVIC lines 32 .. n+32 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t exp_numirq; uint32_t sram_addr_width; uint32_t init_svtor; + uint32_t cpu_mpu_ns[SSE_MAX_CPUS]; + uint32_t cpu_mpu_s[SSE_MAX_CPUS]; bool cpu_fpu[SSE_MAX_CPUS]; bool cpu_dsp[SSE_MAX_CPUS]; }; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse200_properties[] = { DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], false), DEFINE_PROP_BOOL("CPU1_FPU", ARMSSE, cpu_fpu[1], true), DEFINE_PROP_BOOL("CPU1_DSP", ARMSSE, cpu_dsp[1], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), + DEFINE_PROP_UINT32("CPU1_MPU_NS", ARMSSE, cpu_mpu_ns[1], 8), + DEFINE_PROP_UINT32("CPU1_MPU_S", ARMSSE, cpu_mpu_s[1], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse300_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } } + if (!object_property_set_uint(cpuobj, "mpu-ns-regions", + s->cpu_mpu_ns[i], errp)) { + return; + } + if (!object_property_set_uint(cpuobj, "mpu-s-regions", + s->cpu_mpu_s[i], errp)) { + return; + } if (i > 0) { memory_region_add_subregion_overlap(&s->cpu_container[i], 0, diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineClass { int uart_overflow_irq; /* number of the combined UART overflow IRQ */ uint32_t init_svtor; /* init-svtor setting for SSE */ uint32_t sram_addr_width; /* SRAM_ADDR_WIDTH setting for SSE */ + uint32_t cpu0_mpu_ns; /* CPU0_MPU_NS setting for SSE */ + uint32_t cpu0_mpu_s; /* CPU0_MPU_S setting for SSE */ + uint32_t cpu1_mpu_ns; /* CPU1_MPU_NS setting for SSE */ + uint32_t cpu1_mpu_s; /* CPU1_MPU_S setting for SSE */ const RAMInfo *raminfo; const char *armsse_type; uint32_t boot_ram_size; /* size of ram at address 0; 0 == find in raminfo */ @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) #define MPS3_DDR_SIZE (2 * GiB) #endif +/* For cpu{0,1}_mpu_{ns,s}, means "leave at SSE's default value" */ +#define MPU_REGION_DEFAULT UINT32_MAX + static const uint32_t an505_oscclk[] = { 40000000, 24580000, @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq); qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor); + if (mmc->cpu0_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_NS", mmc->cpu0_mpu_ns); + } + if (mmc->cpu0_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_S", mmc->cpu0_mpu_s); + } + if (object_property_find(OBJECT(iotkitdev), "CPU1_MPU_NS")) { + if (mmc->cpu1_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_NS", mmc->cpu1_mpu_ns); + } + if (mmc->cpu1_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_S", mmc->cpu1_mpu_s); + } + } qdev_prop_set_uint32(iotkitdev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); @@ -XXX,XX +XXX,XX @@ static void mps2tz_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); mc->init = mps2tz_common_init; mc->reset = mps2_machine_reset; iic->check = mps2_tz_idau_check; + + /* Most machines leave these at the SSE defaults */ + mmc->cpu0_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu0_mpu_s = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_s = MPU_REGION_DEFAULT; } static void mps2tz_set_default_ram_info(MPS2TZMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3tz_an547_class_init(ObjectClass *oc, void *data) mmc->numirq = 96; mmc->uart_overflow_irq = 48; mmc->init_svtor = 0x00000000; + mmc->cpu0_mpu_s = mmc->cpu0_mpu_ns = 16; mmc->sram_addr_width = 21; mmc->raminfo = an547_raminfo; mmc->armsse_type = TYPE_SSE300; -- 2.34.1