Hi; this pullreq contains mainly a chunk of RTH's refactoring of the Arm pagetable walk code, plus a series from me fixing configure checkpatch warnings, and some old patches to various files all over the tree getting rid of dynamic stack allocation. thanks -- PMM The following changes since commit 6338c30111d596d955e6bc933a82184a0b910c43: Merge tag 'm68k-for-7.2-pull-request' of https://github.com/vivier/qemu-m68k into staging (2022-09-21 13:12:36 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220922 for you to fetch changes up to b3b5472db0ab7a53499441c1fe1dedec05b1e285: configure: Avoid use of 'local' as it is non-POSIX (2022-09-22 16:38:29 +0100) ---------------------------------------------------------------- target-arm queue: * hw/net/can: fix Xilinx ZynqMP CAN RX FIFO logic * Fix alignment for Neon VLD4.32 * Refactoring of page-table-walk code * hw/acpi: Add ospm_status hook implementation for acpi-ged * hw/net/lan9118: Signal TSFL_INT flag when TX FIFO reaches specified level * chardev/baum: avoid variable-length arrays * io/channel-websock: avoid variable-length arrays * hw/net/e1000e_core: Use definition to avoid dynamic stack allocation * hw/ppc/pnv: Avoid dynamic stack allocation * hw/intc/xics: Avoid dynamic stack allocation * hw/i386/multiboot: Avoid dynamic stack allocation * hw/usb/hcd-ohci: Use definition to avoid dynamic stack allocation * ui/curses: Avoid dynamic stack allocation * tests/unit/test-vmstate: Avoid dynamic stack allocation * configure: fix various shellcheck-spotted issues and nits ---------------------------------------------------------------- Anton Kochkov (1): hw/net/can: fix Xilinx ZynqMP CAN RX FIFO logic Clément Chigot (1): target/arm: Fix alignment for VLD4.32 Keqian Zhu (1): hw/acpi: Add ospm_status hook implementation for acpi-ged Lucas Dietrich (1): hw/net/lan9118: Signal TSFL_INT flag when TX FIFO reaches specified level Peter Maydell (7): configure: Remove unused python_version variable configure: Remove unused meson_args variable configure: Add missing quoting for some easy cases configure: Add './' on front of glob of */config-devices.mak.d configure: Remove use of backtick `...` syntax configure: Check mkdir result directly, not via $? configure: Avoid use of 'local' as it is non-POSIX Philippe Mathieu-Daudé (11): chardev/baum: Replace magic values by X_MAX / Y_MAX definitions chardev/baum: Use definitions to avoid dynamic stack allocation chardev/baum: Avoid dynamic stack allocation io/channel-websock: Replace strlen(const_str) by sizeof(const_str) - 1 hw/net/e1000e_core: Use definition to avoid dynamic stack allocation hw/ppc/pnv: Avoid dynamic stack allocation hw/intc/xics: Avoid dynamic stack allocation hw/i386/multiboot: Avoid dynamic stack allocation hw/usb/hcd-ohci: Use definition to avoid dynamic stack allocation ui/curses: Avoid dynamic stack allocation tests/unit/test-vmstate: Avoid dynamic stack allocation Richard Henderson (17): target/arm: Create GetPhysAddrResult target/arm: Use GetPhysAddrResult in get_phys_addr_lpae target/arm: Use GetPhysAddrResult in get_phys_addr_v6 target/arm: Use GetPhysAddrResult in get_phys_addr_v5 target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav5 target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav7 target/arm: Use GetPhysAddrResult in get_phys_addr_pmsav8 target/arm: Use GetPhysAddrResult in pmsav8_mpu_lookup target/arm: Remove is_subpage argument to pmsav8_mpu_lookup target/arm: Add is_secure parameter to v8m_security_lookup target/arm: Add secure parameter to pmsav8_mpu_lookup target/arm: Add is_secure parameter to get_phys_addr_v5 target/arm: Add is_secure parameter to get_phys_addr_v6 target/arm: Add secure parameter to get_phys_addr_pmsav8 target/arm: Add is_secure parameter to pmsav7_use_background_region target/arm: Add secure parameter to get_phys_addr_pmsav7 target/arm: Add is_secure parameter to get_phys_addr_pmsav5 configure | 82 +++++----- target/arm/internals.h | 26 +-- chardev/baum.c | 22 ++- hw/acpi/generic_event_device.c | 8 + hw/i386/multiboot.c | 5 +- hw/intc/xics.c | 2 +- hw/net/can/xlnx-zynqmp-can.c | 32 ++-- hw/net/e1000e_core.c | 7 +- hw/net/lan9118.c | 8 + hw/ppc/pnv.c | 4 +- hw/ppc/spapr.c | 8 +- hw/ppc/spapr_pci_nvlink2.c | 2 +- hw/usb/hcd-ohci.c | 7 +- io/channel-websock.c | 2 +- target/arm/helper.c | 27 ++- target/arm/m_helper.c | 78 ++++----- target/arm/ptw.c | 364 +++++++++++++++++++---------------------- target/arm/tlb_helper.c | 22 +-- target/arm/translate-neon.c | 6 +- tests/unit/test-vmstate.c | 7 +- ui/curses.c | 2 +- 21 files changed, 347 insertions(+), 374 deletions(-) From: Anton Kochkov <anton.kochkov@proton.me> For consistency, function "update_rx_fifo()" should use the RX FIFO register field names, not the TX FIFO ones, even if they refer to the same bit positions in the register. Signed-off-by: Anton Kochkov <anton.kochkov@proton.me> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220817141754.2105981-1-anton.kochkov@proton.me Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1123 [PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/can/xlnx-zynqmp-can.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/hw/net/can/xlnx-zynqmp-can.c b/hw/net/can/xlnx-zynqmp-can.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/can/xlnx-zynqmp-can.c +++ b/hw/net/can/xlnx-zynqmp-can.c @@ -XXX,XX +XXX,XX @@ static void update_rx_fifo(XlnxZynqMPCANState *s, const qemu_can_frame *frame) timestamp)); /* First 32 bit of the data. */ - fifo32_push(&s->rx_fifo, deposit32(0, R_TXFIFO_DATA1_DB3_SHIFT, - R_TXFIFO_DATA1_DB3_LENGTH, + fifo32_push(&s->rx_fifo, deposit32(0, R_RXFIFO_DATA1_DB3_SHIFT, + R_RXFIFO_DATA1_DB3_LENGTH, frame->data[0]) | - deposit32(0, R_TXFIFO_DATA1_DB2_SHIFT, - R_TXFIFO_DATA1_DB2_LENGTH, + deposit32(0, R_RXFIFO_DATA1_DB2_SHIFT, + R_RXFIFO_DATA1_DB2_LENGTH, frame->data[1]) | - deposit32(0, R_TXFIFO_DATA1_DB1_SHIFT, - R_TXFIFO_DATA1_DB1_LENGTH, + deposit32(0, R_RXFIFO_DATA1_DB1_SHIFT, + R_RXFIFO_DATA1_DB1_LENGTH, frame->data[2]) | - deposit32(0, R_TXFIFO_DATA1_DB0_SHIFT, - R_TXFIFO_DATA1_DB0_LENGTH, + deposit32(0, R_RXFIFO_DATA1_DB0_SHIFT, + R_RXFIFO_DATA1_DB0_LENGTH, frame->data[3])); /* Last 32 bit of the data. */ - fifo32_push(&s->rx_fifo, deposit32(0, R_TXFIFO_DATA2_DB7_SHIFT, - R_TXFIFO_DATA2_DB7_LENGTH, + fifo32_push(&s->rx_fifo, deposit32(0, R_RXFIFO_DATA2_DB7_SHIFT, + R_RXFIFO_DATA2_DB7_LENGTH, frame->data[4]) | - deposit32(0, R_TXFIFO_DATA2_DB6_SHIFT, - R_TXFIFO_DATA2_DB6_LENGTH, + deposit32(0, R_RXFIFO_DATA2_DB6_SHIFT, + R_RXFIFO_DATA2_DB6_LENGTH, frame->data[5]) | - deposit32(0, R_TXFIFO_DATA2_DB5_SHIFT, - R_TXFIFO_DATA2_DB5_LENGTH, + deposit32(0, R_RXFIFO_DATA2_DB5_SHIFT, + R_RXFIFO_DATA2_DB5_LENGTH, frame->data[6]) | - deposit32(0, R_TXFIFO_DATA2_DB4_SHIFT, - R_TXFIFO_DATA2_DB4_LENGTH, + deposit32(0, R_RXFIFO_DATA2_DB4_SHIFT, + R_RXFIFO_DATA2_DB4_LENGTH, frame->data[7])); ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 1); -- 2.25.1 From: Clément Chigot <chigot@adacore.com> When requested, the alignment for VLD4.32 is 8 and not 16. See ARM documentation about VLD4 encoding: ebytes = 1 << UInt(size); if size == '10' then alignment = if a == '0' then 1 else 8; else alignment = if a == '0' then 1 else 4*ebytes; Signed-off-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220914105058.2787404-1-chigot@adacore.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-neon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/translate-neon.c b/target/arm/translate-neon.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-neon.c +++ b/target/arm/translate-neon.c @@ -XXX,XX +XXX,XX @@ static bool trans_VLD_all_lanes(DisasContext *s, arg_VLD_all_lanes *a) case 3: return false; case 4: - align = pow2_align(size + 2); + if (size == 2) { + align = pow2_align(3); + } else { + align = pow2_align(size + 2); + } break; default: g_assert_not_reached(); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Combine 5 output pointer arguments from get_phys_addr into a single struct. Adjust all callers. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 13 ++++- target/arm/helper.c | 27 ++++----- target/arm/m_helper.c | 52 ++++++----------- target/arm/ptw.c | 120 +++++++++++++++++++++------------------- target/arm/tlb_helper.c | 22 +++----- 5 files changed, 109 insertions(+), 125 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ typedef struct ARMCacheAttrs { bool is_s2_format:1; } ARMCacheAttrs; +/* Fields that are valid upon success. */ +typedef struct GetPhysAddrResult { + hwaddr phys; + target_ulong page_size; + int prot; + MemTxAttrs attrs; + ARMCacheAttrs cacheattrs; +} GetPhysAddrResult; + bool get_phys_addr(CPUARMState *env, target_ulong address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, - target_ulong *page_size, - ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) + GetPhysAddrResult *result, ARMMMUFaultInfo *fi) __attribute__((nonnull)); void arm_log_exception(CPUState *cs); diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, static uint64_t do_ats_write(CPUARMState *env, uint64_t value, MMUAccessType access_type, ARMMMUIdx mmu_idx) { - hwaddr phys_addr; - target_ulong page_size; - int prot; bool ret; uint64_t par64; bool format64 = false; - MemTxAttrs attrs = {}; ARMMMUFaultInfo fi = {}; - ARMCacheAttrs cacheattrs = {}; + GetPhysAddrResult res = {}; - ret = get_phys_addr(env, value, access_type, mmu_idx, &phys_addr, &attrs, - &prot, &page_size, &fi, &cacheattrs); + ret = get_phys_addr(env, value, access_type, mmu_idx, &res, &fi); /* * ATS operations only do S1 or S1+S2 translations, so we never * have to deal with the ARMCacheAttrs format for S2 only. */ - assert(!cacheattrs.is_s2_format); + assert(!res.cacheattrs.is_s2_format); if (ret) { /* @@ -XXX,XX +XXX,XX @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value, /* Create a 64-bit PAR */ par64 = (1 << 11); /* LPAE bit always set */ if (!ret) { - par64 |= phys_addr & ~0xfffULL; - if (!attrs.secure) { + par64 |= res.phys & ~0xfffULL; + if (!res.attrs.secure) { par64 |= (1 << 9); /* NS */ } - par64 |= (uint64_t)cacheattrs.attrs << 56; /* ATTR */ - par64 |= cacheattrs.shareability << 7; /* SH */ + par64 |= (uint64_t)res.cacheattrs.attrs << 56; /* ATTR */ + par64 |= res.cacheattrs.shareability << 7; /* SH */ } else { uint32_t fsr = arm_fi_to_lfsc(&fi); @@ -XXX,XX +XXX,XX @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value, */ if (!ret) { /* We do not set any attribute bits in the PAR */ - if (page_size == (1 << 24) + if (res.page_size == (1 << 24) && arm_feature(env, ARM_FEATURE_V7)) { - par64 = (phys_addr & 0xff000000) | (1 << 1); + par64 = (res.phys & 0xff000000) | (1 << 1); } else { - par64 = phys_addr & 0xfffff000; + par64 = res.phys & 0xfffff000; } - if (!attrs.secure) { + if (!res.attrs.secure) { par64 |= (1 << 9); /* NS */ } } else { diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; - MemTxAttrs attrs = {}; MemTxResult txres; - target_ulong page_size; - hwaddr physaddr; - int prot; + GetPhysAddrResult res = {}; ARMMMUFaultInfo fi = {}; - ARMCacheAttrs cacheattrs = {}; bool secure = mmu_idx & ARM_MMU_IDX_M_S; int exc; bool exc_secure; - if (get_phys_addr(env, addr, MMU_DATA_STORE, mmu_idx, &physaddr, - &attrs, &prot, &page_size, &fi, &cacheattrs)) { + if (get_phys_addr(env, addr, MMU_DATA_STORE, mmu_idx, &res, &fi)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { if (mode == STACK_LAZYFP) { @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, } goto pend_fault; } - address_space_stl_le(arm_addressspace(cs, attrs), physaddr, value, - attrs, &txres); + address_space_stl_le(arm_addressspace(cs, res.attrs), res.phys, value, + res.attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to write the data */ if (mode == STACK_LAZYFP) { @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_read(ARMCPU *cpu, uint32_t *dest, uint32_t addr, { CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; - MemTxAttrs attrs = {}; MemTxResult txres; - target_ulong page_size; - hwaddr physaddr; - int prot; + GetPhysAddrResult res = {}; ARMMMUFaultInfo fi = {}; - ARMCacheAttrs cacheattrs = {}; bool secure = mmu_idx & ARM_MMU_IDX_M_S; int exc; bool exc_secure; uint32_t value; - if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &physaddr, - &attrs, &prot, &page_size, &fi, &cacheattrs)) { + if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &res, &fi)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { qemu_log_mask(CPU_LOG_INT, @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_read(ARMCPU *cpu, uint32_t *dest, uint32_t addr, goto pend_fault; } - value = address_space_ldl(arm_addressspace(cs, attrs), physaddr, - attrs, &txres); + value = address_space_ldl(arm_addressspace(cs, res.attrs), res.phys, + res.attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to read the data */ qemu_log_mask(CPU_LOG_INT, "...BusFault with BFSR.UNSTKERR\n"); @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; V8M_SAttributes sattrs = {}; - MemTxAttrs attrs = {}; + GetPhysAddrResult res = {}; ARMMMUFaultInfo fi = {}; - ARMCacheAttrs cacheattrs = {}; MemTxResult txres; - target_ulong page_size; - hwaddr physaddr; - int prot; v8m_security_lookup(env, addr, MMU_INST_FETCH, mmu_idx, &sattrs); if (!sattrs.nsc || sattrs.ns) { @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, "...really SecureFault with SFSR.INVEP\n"); return false; } - if (get_phys_addr(env, addr, MMU_INST_FETCH, mmu_idx, &physaddr, - &attrs, &prot, &page_size, &fi, &cacheattrs)) { + if (get_phys_addr(env, addr, MMU_INST_FETCH, mmu_idx, &res, &fi)) { /* the MPU lookup failed */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_IACCVIOL_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_MEM, env->v7m.secure); qemu_log_mask(CPU_LOG_INT, "...really MemManage with CFSR.IACCVIOL\n"); return false; } - *insn = address_space_lduw_le(arm_addressspace(cs, attrs), physaddr, - attrs, &txres); + *insn = address_space_lduw_le(arm_addressspace(cs, res.attrs), res.phys, + res.attrs, &txres); if (txres != MEMTX_OK) { env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_IBUSERR_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); @@ -XXX,XX +XXX,XX @@ static bool v7m_read_sg_stack_word(ARMCPU *cpu, ARMMMUIdx mmu_idx, */ CPUState *cs = CPU(cpu); CPUARMState *env = &cpu->env; - MemTxAttrs attrs = {}; MemTxResult txres; - target_ulong page_size; - hwaddr physaddr; - int prot; + GetPhysAddrResult res = {}; ARMMMUFaultInfo fi = {}; - ARMCacheAttrs cacheattrs = {}; uint32_t value; - if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &physaddr, - &attrs, &prot, &page_size, &fi, &cacheattrs)) { + if (get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &res, &fi)) { /* MPU/SAU lookup failed */ if (fi.type == ARMFault_QEMU_SFault) { qemu_log_mask(CPU_LOG_INT, @@ -XXX,XX +XXX,XX @@ static bool v7m_read_sg_stack_word(ARMCPU *cpu, ARMMMUIdx mmu_idx, } return false; } - value = address_space_ldl(arm_addressspace(cs, attrs), physaddr, - attrs, &txres); + value = address_space_ldl(arm_addressspace(cs, res.attrs), res.phys, + res.attrs, &txres); if (txres != MEMTX_OK) { /* BusFault trying to read the data */ qemu_log_mask(CPU_LOG_INT, diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static ARMCacheAttrs combine_cacheattrs(CPUARMState *env, * @address: virtual address to get physical address for * @access_type: 0 for read, 1 for write, 2 for execute * @mmu_idx: MMU index indicating required translation regime - * @phys_ptr: set to the physical address corresponding to the virtual address - * @attrs: set to the memory transaction attributes to use - * @prot: set to the permissions for the page containing phys_ptr - * @page_size: set to the size of the page containing phys_ptr + * @result: set on translation success. * @fi: set to fault info if the translation fails - * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes */ bool get_phys_addr(CPUARMState *env, target_ulong address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, - target_ulong *page_size, - ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) + GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { ARMMMUIdx s1_mmu_idx = stage_1_mmu_idx(mmu_idx); @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, */ if (arm_feature(env, ARM_FEATURE_EL2)) { hwaddr ipa; - int s2_prot; + int s1_prot; int ret; bool ipa_secure; - ARMCacheAttrs cacheattrs2 = {}; + ARMCacheAttrs cacheattrs1; ARMMMUIdx s2_mmu_idx; bool is_el0; - ret = get_phys_addr(env, address, access_type, s1_mmu_idx, &ipa, - attrs, prot, page_size, fi, cacheattrs); + ret = get_phys_addr(env, address, access_type, s1_mmu_idx, + result, fi); /* If S1 fails or S2 is disabled, return early. */ if (ret || regime_translation_disabled(env, ARMMMUIdx_Stage2)) { - *phys_ptr = ipa; return ret; } - ipa_secure = attrs->secure; + ipa = result->phys; + ipa_secure = result->attrs.secure; if (arm_is_secure_below_el3(env)) { if (ipa_secure) { - attrs->secure = !(env->cp15.vstcr_el2 & VSTCR_SW); + result->attrs.secure = !(env->cp15.vstcr_el2 & VSTCR_SW); } else { - attrs->secure = !(env->cp15.vtcr_el2 & VTCR_NSW); + result->attrs.secure = !(env->cp15.vtcr_el2 & VTCR_NSW); } } else { assert(!ipa_secure); } - s2_mmu_idx = attrs->secure ? ARMMMUIdx_Stage2_S : ARMMMUIdx_Stage2; + s2_mmu_idx = (result->attrs.secure + ? ARMMMUIdx_Stage2_S : ARMMMUIdx_Stage2); is_el0 = mmu_idx == ARMMMUIdx_E10_0 || mmu_idx == ARMMMUIdx_SE10_0; - /* S1 is done. Now do S2 translation. */ + /* + * S1 is done, now do S2 translation. + * Save the stage1 results so that we may merge + * prot and cacheattrs later. + */ + s1_prot = result->prot; + cacheattrs1 = result->cacheattrs; + memset(result, 0, sizeof(*result)); + ret = get_phys_addr_lpae(env, ipa, access_type, s2_mmu_idx, is_el0, - phys_ptr, attrs, &s2_prot, - page_size, fi, &cacheattrs2); + &result->phys, &result->attrs, + &result->prot, &result->page_size, + fi, &result->cacheattrs); fi->s2addr = ipa; + /* Combine the S1 and S2 perms. */ - *prot &= s2_prot; + result->prot &= s1_prot; /* If S2 fails, return early. */ if (ret) { @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, * Outer Write-Back Read-Allocate Write-Allocate. * Do not overwrite Tagged within attrs. */ - if (cacheattrs->attrs != 0xf0) { - cacheattrs->attrs = 0xff; + if (cacheattrs1.attrs != 0xf0) { + cacheattrs1.attrs = 0xff; } - cacheattrs->shareability = 0; + cacheattrs1.shareability = 0; } - *cacheattrs = combine_cacheattrs(env, *cacheattrs, cacheattrs2); + result->cacheattrs = combine_cacheattrs(env, cacheattrs1, + result->cacheattrs); /* Check if IPA translates to secure or non-secure PA space. */ if (arm_is_secure_below_el3(env)) { if (ipa_secure) { - attrs->secure = + result->attrs.secure = !(env->cp15.vstcr_el2 & (VSTCR_SA | VSTCR_SW)); } else { - attrs->secure = + result->attrs.secure = !((env->cp15.vtcr_el2 & (VTCR_NSA | VTCR_NSW)) || (env->cp15.vstcr_el2 & (VSTCR_SA | VSTCR_SW))); } @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, * cannot upgrade an non-secure translation regime's attributes * to secure. */ - attrs->secure = regime_is_secure(env, mmu_idx); - attrs->user = regime_is_user(env, mmu_idx); + result->attrs.secure = regime_is_secure(env, mmu_idx); + result->attrs.user = regime_is_user(env, mmu_idx); /* * Fast Context Switch Extension. This doesn't exist at all in v8. @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, if (arm_feature(env, ARM_FEATURE_PMSA)) { bool ret; - *page_size = TARGET_PAGE_SIZE; + result->page_size = TARGET_PAGE_SIZE; if (arm_feature(env, ARM_FEATURE_V8)) { /* PMSAv8 */ ret = get_phys_addr_pmsav8(env, address, access_type, mmu_idx, - phys_ptr, attrs, prot, page_size, fi); + &result->phys, &result->attrs, + &result->prot, &result->page_size, fi); } else if (arm_feature(env, ARM_FEATURE_V7)) { /* PMSAv7 */ ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, - phys_ptr, prot, page_size, fi); + &result->phys, &result->prot, + &result->page_size, fi); } else { /* Pre-v7 MPU */ ret = get_phys_addr_pmsav5(env, address, access_type, mmu_idx, - phys_ptr, prot, fi); + &result->phys, &result->prot, fi); } qemu_log_mask(CPU_LOG_MMU, "PMSA MPU lookup for %s at 0x%08" PRIx32 " mmu_idx %u -> %s (prot %c%c%c)\n", @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, (access_type == MMU_DATA_STORE ? "writing" : "execute"), (uint32_t)address, mmu_idx, ret ? "Miss" : "Hit", - *prot & PAGE_READ ? 'r' : '-', - *prot & PAGE_WRITE ? 'w' : '-', - *prot & PAGE_EXEC ? 'x' : '-'); + result->prot & PAGE_READ ? 'r' : '-', + result->prot & PAGE_WRITE ? 'w' : '-', + result->prot & PAGE_EXEC ? 'x' : '-'); return ret; } @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, address = extract64(address, 0, 52); } } - *phys_ptr = address; - *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; - *page_size = TARGET_PAGE_SIZE; + result->phys = address; + result->prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; + result->page_size = TARGET_PAGE_SIZE; /* Fill in cacheattr a-la AArch64.TranslateAddressS1Off. */ hcr = arm_hcr_el2_eff(env); - cacheattrs->shareability = 0; - cacheattrs->is_s2_format = false; + result->cacheattrs.shareability = 0; + result->cacheattrs.is_s2_format = false; if (hcr & HCR_DC) { if (hcr & HCR_DCT) { memattr = 0xf0; /* Tagged, Normal, WB, RWA */ @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, } else { memattr = 0x44; /* Normal, NC, No */ } - cacheattrs->shareability = 2; /* outer sharable */ + result->cacheattrs.shareability = 2; /* outer sharable */ } else { memattr = 0x00; /* Device, nGnRnE */ } - cacheattrs->attrs = memattr; + result->cacheattrs.attrs = memattr; return 0; } if (regime_using_lpae_format(env, mmu_idx)) { return get_phys_addr_lpae(env, address, access_type, mmu_idx, false, - phys_ptr, attrs, prot, page_size, - fi, cacheattrs); + &result->phys, &result->attrs, + &result->prot, &result->page_size, + fi, &result->cacheattrs); } else if (regime_sctlr(env, mmu_idx) & SCTLR_XP) { return get_phys_addr_v6(env, address, access_type, mmu_idx, - phys_ptr, attrs, prot, page_size, fi); + &result->phys, &result->attrs, + &result->prot, &result->page_size, fi); } else { return get_phys_addr_v5(env, address, access_type, mmu_idx, - phys_ptr, prot, page_size, fi); + &result->phys, &result->prot, + &result->page_size, fi); } } @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, { ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; - hwaddr phys_addr; - target_ulong page_size; - int prot; - bool ret; + GetPhysAddrResult res = {}; ARMMMUFaultInfo fi = {}; ARMMMUIdx mmu_idx = arm_mmu_idx(env); - ARMCacheAttrs cacheattrs = {}; + bool ret; - *attrs = (MemTxAttrs) {}; - - ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, - attrs, &prot, &page_size, &fi, &cacheattrs); + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &res, &fi); + *attrs = res.attrs; if (ret) { return -1; } - return phys_addr; + return res.phys; } diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tlb_helper.c +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, { ARMCPU *cpu = ARM_CPU(cs); ARMMMUFaultInfo fi = {}; - hwaddr phys_addr; - target_ulong page_size; - int prot, ret; - MemTxAttrs attrs = {}; - ARMCacheAttrs cacheattrs = {}; + GetPhysAddrResult res = {}; + int ret; /* * Walk the page table and (if the mapping exists) add the page @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, */ ret = get_phys_addr(&cpu->env, address, access_type, core_to_arm_mmu_idx(&cpu->env, mmu_idx), - &phys_addr, &attrs, &prot, &page_size, - &fi, &cacheattrs); + &res, &fi); if (likely(!ret)) { /* * Map a single [sub]page. Regions smaller than our declared * target page size are handled specially, so for those we * pass in the exact addresses. */ - if (page_size >= TARGET_PAGE_SIZE) { - phys_addr &= TARGET_PAGE_MASK; + if (res.page_size >= TARGET_PAGE_SIZE) { + res.phys &= TARGET_PAGE_MASK; address &= TARGET_PAGE_MASK; } /* Notice and record tagged memory. */ - if (cpu_isar_feature(aa64_mte, cpu) && cacheattrs.attrs == 0xf0) { - arm_tlb_mte_tagged(&attrs) = true; + if (cpu_isar_feature(aa64_mte, cpu) && res.cacheattrs.attrs == 0xf0) { + arm_tlb_mte_tagged(&res.attrs) = true; } - tlb_set_page_with_attrs(cs, address, phys_addr, attrs, - prot, mmu_idx, page_size); + tlb_set_page_with_attrs(cs, address, res.phys, res.attrs, + res.prot, mmu_idx, res.page_size); return true; } else if (probe) { return false; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-4-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 69 ++++++++++++++++++------------------------------ 1 file changed, 26 insertions(+), 43 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - bool s1_is_el0, hwaddr *phys_ptr, - MemTxAttrs *txattrs, int *prot, - target_ulong *page_size_ptr, - ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) + bool s1_is_el0, GetPhysAddrResult *result, + ARMMMUFaultInfo *fi) __attribute__((nonnull)); /* This mapping is common between ID_AA64MMFR0.PARANGE and TCR_ELx.{I}PS. */ @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, { if (arm_mmu_idx_is_stage1_of_2(mmu_idx) && !regime_translation_disabled(env, ARMMMUIdx_Stage2)) { - target_ulong s2size; - hwaddr s2pa; - int s2prot; - int ret; ARMMMUIdx s2_mmu_idx = *is_secure ? ARMMMUIdx_Stage2_S : ARMMMUIdx_Stage2; - ARMCacheAttrs cacheattrs = {}; - MemTxAttrs txattrs = {}; + GetPhysAddrResult s2 = {}; + int ret; ret = get_phys_addr_lpae(env, addr, MMU_DATA_LOAD, s2_mmu_idx, false, - &s2pa, &txattrs, &s2prot, &s2size, fi, - &cacheattrs); + &s2, fi); if (ret) { assert(fi->type != ARMFault_None); fi->s2addr = addr; @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, return ~0; } if ((arm_hcr_el2_eff(env) & HCR_PTW) && - ptw_attrs_are_device(env, cacheattrs)) { + ptw_attrs_are_device(env, s2.cacheattrs)) { /* * PTW set and S1 walk touched S2 Device memory: * generate Permission fault. @@ -XXX,XX +XXX,XX @@ static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, assert(!*is_secure); } - addr = s2pa; + addr = s2.phys; } return addr; } @@ -XXX,XX +XXX,XX @@ static bool check_s2_mmu_setup(ARMCPU *cpu, bool is_aa64, int level, * table walk), must be true if this is stage 2 of a stage 1+2 * walk for an EL0 access. If @mmu_idx is anything else, * @s1_is_el0 is ignored. - * @phys_ptr: set to the physical address corresponding to the virtual address - * @attrs: set to the memory transaction attributes to use - * @prot: set to the permissions for the page containing phys_ptr - * @page_size_ptr: set to the size of the page containing phys_ptr + * @result: set on translation success, * @fi: set to fault info if the translation fails - * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes */ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - bool s1_is_el0, hwaddr *phys_ptr, - MemTxAttrs *txattrs, int *prot, - target_ulong *page_size_ptr, - ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) + bool s1_is_el0, GetPhysAddrResult *result, + ARMMMUFaultInfo *fi) { ARMCPU *cpu = env_archcpu(env); /* Read an LPAE long-descriptor translation table. */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { ns = mmu_idx == ARMMMUIdx_Stage2; xn = extract32(attrs, 11, 2); - *prot = get_S2prot(env, ap, xn, s1_is_el0); + result->prot = get_S2prot(env, ap, xn, s1_is_el0); } else { ns = extract32(attrs, 3, 1); xn = extract32(attrs, 12, 1); pxn = extract32(attrs, 11, 1); - *prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn); + result->prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn); } fault_type = ARMFault_Permission; - if (!(*prot & (1 << access_type))) { + if (!(result->prot & (1 << access_type))) { goto do_fault; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, * the CPU doesn't support TZ or this is a non-secure translation * regime, because the attribute will already be non-secure. */ - txattrs->secure = false; + result->attrs.secure = false; } /* When in aarch64 mode, and BTI is enabled, remember GP in the IOTLB. */ if (aarch64 && guarded && cpu_isar_feature(aa64_bti, cpu)) { - arm_tlb_bti_gp(txattrs) = true; + arm_tlb_bti_gp(&result->attrs) = true; } if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { - cacheattrs->is_s2_format = true; - cacheattrs->attrs = extract32(attrs, 0, 4); + result->cacheattrs.is_s2_format = true; + result->cacheattrs.attrs = extract32(attrs, 0, 4); } else { /* Index into MAIR registers for cache attributes */ uint8_t attrindx = extract32(attrs, 0, 3); uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)]; assert(attrindx <= 7); - cacheattrs->is_s2_format = false; - cacheattrs->attrs = extract64(mair, attrindx * 8, 8); + result->cacheattrs.is_s2_format = false; + result->cacheattrs.attrs = extract64(mair, attrindx * 8, 8); } /* @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, * that case comes from TCR_ELx, which we extracted earlier. */ if (param.ds) { - cacheattrs->shareability = param.sh; + result->cacheattrs.shareability = param.sh; } else { - cacheattrs->shareability = extract32(attrs, 6, 2); + result->cacheattrs.shareability = extract32(attrs, 6, 2); } - *phys_ptr = descaddr; - *page_size_ptr = page_size; + result->phys = descaddr; + result->page_size = page_size; return false; do_fault: @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, cacheattrs1 = result->cacheattrs; memset(result, 0, sizeof(*result)); - ret = get_phys_addr_lpae(env, ipa, access_type, s2_mmu_idx, is_el0, - &result->phys, &result->attrs, - &result->prot, &result->page_size, - fi, &result->cacheattrs); + ret = get_phys_addr_lpae(env, ipa, access_type, s2_mmu_idx, + is_el0, result, fi); fi->s2addr = ipa; /* Combine the S1 and S2 perms. */ @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, if (regime_using_lpae_format(env, mmu_idx)) { return get_phys_addr_lpae(env, address, access_type, mmu_idx, false, - &result->phys, &result->attrs, - &result->prot, &result->page_size, - fi, &result->cacheattrs); + result, fi); } else if (regime_sctlr(env, mmu_idx) & SCTLR_XP) { return get_phys_addr_v6(env, address, access_type, mmu_idx, &result->phys, &result->attrs, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-5-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 30 ++++++++++++++---------------- 1 file changed, 14 insertions(+), 16 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ do_fault: static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, - target_ulong *page_size, ARMMMUFaultInfo *fi) + GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { ARMCPU *cpu = env_archcpu(env); int level = 1; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, phys_addr = (desc & 0xff000000) | (address & 0x00ffffff); phys_addr |= (uint64_t)extract32(desc, 20, 4) << 32; phys_addr |= (uint64_t)extract32(desc, 5, 4) << 36; - *page_size = 0x1000000; + result->page_size = 0x1000000; } else { /* Section. */ phys_addr = (desc & 0xfff00000) | (address & 0x000fffff); - *page_size = 0x100000; + result->page_size = 0x100000; } ap = ((desc >> 10) & 3) | ((desc >> 13) & 4); xn = desc & (1 << 4); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, case 1: /* 64k page. */ phys_addr = (desc & 0xffff0000) | (address & 0xffff); xn = desc & (1 << 15); - *page_size = 0x10000; + result->page_size = 0x10000; break; case 2: case 3: /* 4k page. */ phys_addr = (desc & 0xfffff000) | (address & 0xfff); xn = desc & 1; - *page_size = 0x1000; + result->page_size = 0x1000; break; default: /* Never happens, but compiler isn't smart enough to tell. */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, } } if (domain_prot == 3) { - *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; + result->prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; } else { if (pxn && !regime_is_user(env, mmu_idx)) { xn = 1; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, fi->type = ARMFault_AccessFlag; goto do_fault; } - *prot = simple_ap_to_rw_prot(env, mmu_idx, ap >> 1); + result->prot = simple_ap_to_rw_prot(env, mmu_idx, ap >> 1); } else { - *prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot); + result->prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot); } - if (*prot && !xn) { - *prot |= PAGE_EXEC; + if (result->prot && !xn) { + result->prot |= PAGE_EXEC; } - if (!(*prot & (1 << access_type))) { + if (!(result->prot & (1 << access_type))) { /* Access permission fault. */ fi->type = ARMFault_Permission; goto do_fault; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, * the CPU doesn't support TZ or this is a non-secure translation * regime, because the attribute will already be non-secure. */ - attrs->secure = false; + result->attrs.secure = false; } - *phys_ptr = phys_addr; + result->phys = phys_addr; return false; do_fault: fi->domain = domain; @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, result, fi); } else if (regime_sctlr(env, mmu_idx) & SCTLR_XP) { return get_phys_addr_v6(env, address, access_type, mmu_idx, - &result->phys, &result->attrs, - &result->prot, &result->page_size, fi); + result, fi); } else { return get_phys_addr_v5(env, address, access_type, mmu_idx, &result->phys, &result->prot, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-6-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static int simple_ap_to_rw_prot(CPUARMState *env, ARMMMUIdx mmu_idx, int ap) static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, int *prot, - target_ulong *page_size, - ARMMMUFaultInfo *fi) + GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { int level = 1; uint32_t table; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, /* 1Mb section. */ phys_addr = (desc & 0xfff00000) | (address & 0x000fffff); ap = (desc >> 10) & 3; - *page_size = 1024 * 1024; + result->page_size = 1024 * 1024; } else { /* Lookup l2 entry. */ if (type == 1) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, case 1: /* 64k page. */ phys_addr = (desc & 0xffff0000) | (address & 0xffff); ap = (desc >> (4 + ((address >> 13) & 6))) & 3; - *page_size = 0x10000; + result->page_size = 0x10000; break; case 2: /* 4k page. */ phys_addr = (desc & 0xfffff000) | (address & 0xfff); ap = (desc >> (4 + ((address >> 9) & 6))) & 3; - *page_size = 0x1000; + result->page_size = 0x1000; break; case 3: /* 1k page, or ARMv6/XScale "extended small (4k) page" */ if (type == 1) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, if (arm_feature(env, ARM_FEATURE_XSCALE) || arm_feature(env, ARM_FEATURE_V6)) { phys_addr = (desc & 0xfffff000) | (address & 0xfff); - *page_size = 0x1000; + result->page_size = 0x1000; } else { /* * UNPREDICTABLE in ARMv5; we choose to take a @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, } } else { phys_addr = (desc & 0xfffffc00) | (address & 0x3ff); - *page_size = 0x400; + result->page_size = 0x400; } ap = (desc >> 4) & 3; break; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, g_assert_not_reached(); } } - *prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot); - *prot |= *prot ? PAGE_EXEC : 0; - if (!(*prot & (1 << access_type))) { + result->prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot); + result->prot |= result->prot ? PAGE_EXEC : 0; + if (!(result->prot & (1 << access_type))) { /* Access permission fault. */ fi->type = ARMFault_Permission; goto do_fault; } - *phys_ptr = phys_addr; + result->phys = phys_addr; return false; do_fault: fi->domain = domain; @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, result, fi); } else { return get_phys_addr_v5(env, address, access_type, mmu_idx, - &result->phys, &result->prot, - &result->page_size, fi); + result, fi); } } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-7-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ do_fault: static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, int *prot, + GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { int n; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address, if (regime_translation_disabled(env, mmu_idx)) { /* MPU disabled. */ - *phys_ptr = address; - *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; + result->phys = address; + result->prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; return false; } - *phys_ptr = address; + result->phys = address; for (n = 7; n >= 0; n--) { base = env->cp15.c6_region[n]; if ((base & 1) == 0) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address, fi->level = 1; return true; } - *prot = PAGE_READ | PAGE_WRITE; + result->prot = PAGE_READ | PAGE_WRITE; break; case 2: - *prot = PAGE_READ; + result->prot = PAGE_READ; if (!is_user) { - *prot |= PAGE_WRITE; + result->prot |= PAGE_WRITE; } break; case 3: - *prot = PAGE_READ | PAGE_WRITE; + result->prot = PAGE_READ | PAGE_WRITE; break; case 5: if (is_user) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address, fi->level = 1; return true; } - *prot = PAGE_READ; + result->prot = PAGE_READ; break; case 6: - *prot = PAGE_READ; + result->prot = PAGE_READ; break; default: /* Bad permission. */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address, fi->level = 1; return true; } - *prot |= PAGE_EXEC; + result->prot |= PAGE_EXEC; return false; } @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, } else { /* Pre-v7 MPU */ ret = get_phys_addr_pmsav5(env, address, access_type, mmu_idx, - &result->phys, &result->prot, fi); + result, fi); } qemu_log_mask(CPU_LOG_MMU, "PMSA MPU lookup for %s at 0x%08" PRIx32 " mmu_idx %u -> %s (prot %c%c%c)\n", -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-8-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx, static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, int *prot, - target_ulong *page_size, + GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { ARMCPU *cpu = env_archcpu(env); int n; bool is_user = regime_is_user(env, mmu_idx); - *phys_ptr = address; - *page_size = TARGET_PAGE_SIZE; - *prot = 0; + result->phys = address; + result->page_size = TARGET_PAGE_SIZE; + result->prot = 0; if (regime_translation_disabled(env, mmu_idx) || m_is_ppb_region(env, address)) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, * which always does a direct read using address_space_ldl(), rather * than going via this function, so we don't need to check that here. */ - get_phys_addr_pmsav7_default(env, mmu_idx, address, prot); + get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->prot); } else { /* MPU enabled */ for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) { /* region search */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, if (ranges_overlap(base, rmask, address & TARGET_PAGE_MASK, TARGET_PAGE_SIZE)) { - *page_size = 1; + result->page_size = 1; } continue; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, continue; } if (rsize < TARGET_PAGE_BITS) { - *page_size = 1 << rsize; + result->page_size = 1 << rsize; } break; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, fi->type = ARMFault_Background; return true; } - get_phys_addr_pmsav7_default(env, mmu_idx, address, prot); + get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->prot); } else { /* a MPU hit! */ uint32_t ap = extract32(env->pmsav7.dracr[n], 8, 3); uint32_t xn = extract32(env->pmsav7.dracr[n], 12, 1); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, case 5: break; /* no access */ case 3: - *prot |= PAGE_WRITE; + result->prot |= PAGE_WRITE; /* fall through */ case 2: case 6: - *prot |= PAGE_READ | PAGE_EXEC; + result->prot |= PAGE_READ | PAGE_EXEC; break; case 7: /* for v7M, same as 6; for R profile a reserved value */ if (arm_feature(env, ARM_FEATURE_M)) { - *prot |= PAGE_READ | PAGE_EXEC; + result->prot |= PAGE_READ | PAGE_EXEC; break; } /* fall through */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, case 1: case 2: case 3: - *prot |= PAGE_WRITE; + result->prot |= PAGE_WRITE; /* fall through */ case 5: case 6: - *prot |= PAGE_READ | PAGE_EXEC; + result->prot |= PAGE_READ | PAGE_EXEC; break; case 7: /* for v7M, same as 6; for R profile a reserved value */ if (arm_feature(env, ARM_FEATURE_M)) { - *prot |= PAGE_READ | PAGE_EXEC; + result->prot |= PAGE_READ | PAGE_EXEC; break; } /* fall through */ @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, /* execute never */ if (xn) { - *prot &= ~PAGE_EXEC; + result->prot &= ~PAGE_EXEC; } } } fi->type = ARMFault_Permission; fi->level = 1; - return !(*prot & (1 << access_type)); + return !(result->prot & (1 << access_type)); } bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, } else if (arm_feature(env, ARM_FEATURE_V7)) { /* PMSAv7 */ ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, - &result->phys, &result->prot, - &result->page_size, fi); + result, fi); } else { /* Pre-v7 MPU */ ret = get_phys_addr_pmsav5(env, address, access_type, mmu_idx, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-9-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ void v8m_security_lookup(CPUARMState *env, uint32_t address, static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *txattrs, - int *prot, target_ulong *page_size, + GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { uint32_t secure = regime_is_secure(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, } else { fi->type = ARMFault_QEMU_SFault; } - *page_size = sattrs.subpage ? 1 : TARGET_PAGE_SIZE; - *phys_ptr = address; - *prot = 0; + result->page_size = sattrs.subpage ? 1 : TARGET_PAGE_SIZE; + result->phys = address; + result->prot = 0; return true; } } else { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, * might downgrade a secure access to nonsecure. */ if (sattrs.ns) { - txattrs->secure = false; + result->attrs.secure = false; } else if (!secure) { /* * NS access to S memory must fault. @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, * for M_FAKE_FSR_SFAULT in arm_v7m_cpu_do_interrupt(). */ fi->type = ARMFault_QEMU_SFault; - *page_size = sattrs.subpage ? 1 : TARGET_PAGE_SIZE; - *phys_ptr = address; - *prot = 0; + result->page_size = sattrs.subpage ? 1 : TARGET_PAGE_SIZE; + result->phys = address; + result->prot = 0; return true; } } } - ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, phys_ptr, - txattrs, prot, &mpu_is_subpage, fi, NULL); - *page_size = sattrs.subpage || mpu_is_subpage ? 1 : TARGET_PAGE_SIZE; + ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, + &result->phys, &result->attrs, &result->prot, + &mpu_is_subpage, fi, NULL); + result->page_size = + sattrs.subpage || mpu_is_subpage ? 1 : TARGET_PAGE_SIZE; return ret; } @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, if (arm_feature(env, ARM_FEATURE_V8)) { /* PMSAv8 */ ret = get_phys_addr_pmsav8(env, address, access_type, mmu_idx, - &result->phys, &result->attrs, - &result->prot, &result->page_size, fi); + result, fi); } else if (arm_feature(env, ARM_FEATURE_V7)) { /* PMSAv7 */ ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-10-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 11 +++++------ target/arm/m_helper.c | 16 +++++++--------- target/arm/ptw.c | 20 +++++++++----------- 3 files changed, 21 insertions(+), 26 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void v8m_security_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, V8M_SAttributes *sattrs); -bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, - MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *txattrs, - int *prot, bool *is_subpage, - ARMMMUFaultInfo *fi, uint32_t *mregion); - /* Cacheability and shareability attributes for a memory access */ typedef struct ARMCacheAttrs { /* @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, GetPhysAddrResult *result, ARMMMUFaultInfo *fi) __attribute__((nonnull)); +bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + GetPhysAddrResult *result, bool *is_subpage, + ARMMMUFaultInfo *fi, uint32_t *mregion); + void arm_log_exception(CPUState *cs); #endif /* !CONFIG_USER_ONLY */ diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) V8M_SAttributes sattrs = {}; uint32_t tt_resp; bool r, rw, nsr, nsrw, mrvalid; - int prot; - ARMMMUFaultInfo fi = {}; - MemTxAttrs attrs = {}; - hwaddr phys_addr; ARMMMUIdx mmu_idx; uint32_t mregion; bool targetpriv; bool targetsec = env->v7m.secure; - bool is_subpage; /* * Work out what the security state and privilege level we're @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) * inspecting the other MPU state. */ if (arm_current_el(env) != 0 || alt) { + GetPhysAddrResult res = {}; + ARMMMUFaultInfo fi = {}; + bool is_subpage; + /* We can ignore the return value as prot is always set */ pmsav8_mpu_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, - &phys_addr, &attrs, &prot, &is_subpage, - &fi, &mregion); + &res, &is_subpage, &fi, &mregion); if (mregion == -1) { mrvalid = false; mregion = 0; } else { mrvalid = true; } - r = prot & PAGE_READ; - rw = prot & PAGE_WRITE; + r = res.prot & PAGE_READ; + rw = res.prot & PAGE_WRITE; } else { r = false; rw = false; diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *txattrs, - int *prot, bool *is_subpage, + GetPhysAddrResult *result, bool *is_subpage, ARMMMUFaultInfo *fi, uint32_t *mregion) { /* @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1); *is_subpage = false; - *phys_ptr = address; - *prot = 0; + result->phys = address; + result->prot = 0; if (mregion) { *mregion = -1; } @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, if (matchregion == -1) { /* hit using the background region */ - get_phys_addr_pmsav7_default(env, mmu_idx, address, prot); + get_phys_addr_pmsav7_default(env, mmu_idx, address, &result->prot); } else { uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2); uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1); @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, xn = 1; } - *prot = simple_ap_to_rw_prot(env, mmu_idx, ap); - if (*prot && !xn && !(pxn && !is_user)) { - *prot |= PAGE_EXEC; + result->prot = simple_ap_to_rw_prot(env, mmu_idx, ap); + if (result->prot && !xn && !(pxn && !is_user)) { + result->prot |= PAGE_EXEC; } /* * We don't need to look the attribute up in the MAIR0/MAIR1 @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, fi->type = ARMFault_Permission; fi->level = 1; - return !(*prot & (1 << access_type)); + return !(result->prot & (1 << access_type)); } static bool v8m_is_sau_exempt(CPUARMState *env, @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, } ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, - &result->phys, &result->attrs, &result->prot, - &mpu_is_subpage, fi, NULL); + result, &mpu_is_subpage, fi, NULL); result->page_size = sattrs.subpage || mpu_is_subpage ? 1 : TARGET_PAGE_SIZE; return ret; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This can be made redundant with result->page_size, by moving the basic set of page_size from get_phys_addr_pmsav8. We still need to overwrite page_size when v8m_security_lookup signals a subpage. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-11-richard.henderson@linaro.org [PMM: Update a comment that used to refer to is_subpage] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 4 ++-- target/arm/m_helper.c | 3 +-- target/arm/ptw.c | 23 ++++++++++++----------- 3 files changed, 15 insertions(+), 15 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, bool *is_subpage, - ARMMMUFaultInfo *fi, uint32_t *mregion); + GetPhysAddrResult *result, ARMMMUFaultInfo *fi, + uint32_t *mregion); void arm_log_exception(CPUState *cs); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) if (arm_current_el(env) != 0 || alt) { GetPhysAddrResult res = {}; ARMMMUFaultInfo fi = {}; - bool is_subpage; /* We can ignore the return value as prot is always set */ pmsav8_mpu_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, - &res, &is_subpage, &fi, &mregion); + &res, &fi, &mregion); if (mregion == -1) { mrvalid = false; mregion = 0; diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, bool *is_subpage, - ARMMMUFaultInfo *fi, uint32_t *mregion) + GetPhysAddrResult *result, ARMMMUFaultInfo *fi, + uint32_t *mregion) { /* * Perform a PMSAv8 MPU lookup (without also doing the SAU check @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, * mregion is (if not NULL) set to the region number which matched, * or -1 if no region number is returned (MPU off, address did not * hit a region, address hit in multiple regions). - * We set is_subpage to true if the region hit doesn't cover the - * entire TARGET_PAGE the address is within. + * If the region hit doesn't cover the entire TARGET_PAGE the address + * is within, then we set the result page_size to 1 to force the + * memory system to use a subpage. */ ARMCPU *cpu = env_archcpu(env); bool is_user = regime_is_user(env, mmu_idx); @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, uint32_t addr_page_base = address & TARGET_PAGE_MASK; uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1); - *is_subpage = false; + result->page_size = TARGET_PAGE_SIZE; result->phys = address; result->prot = 0; if (mregion) { @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, ranges_overlap(base, limit - base + 1, addr_page_base, TARGET_PAGE_SIZE)) { - *is_subpage = true; + result->page_size = 1; } continue; } if (base > addr_page_base || limit < addr_page_limit) { - *is_subpage = true; + result->page_size = 1; } if (matchregion != -1) { @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, uint32_t secure = regime_is_secure(env, mmu_idx); V8M_SAttributes sattrs = {}; bool ret; - bool mpu_is_subpage; if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { v8m_security_lookup(env, address, access_type, mmu_idx, &sattrs); @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, } ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, - result, &mpu_is_subpage, fi, NULL); - result->page_size = - sattrs.subpage || mpu_is_subpage ? 1 : TARGET_PAGE_SIZE; + result, fi, NULL); + if (sattrs.subpage) { + result->page_size = 1; + } return ret; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove the use of regime_is_secure from v8m_security_lookup, passing the new parameter to the lookup instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-12-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 +- target/arm/m_helper.c | 9 ++++++--- target/arm/ptw.c | 9 +++++---- 3 files changed, 12 insertions(+), 8 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ typedef struct V8M_SAttributes { void v8m_security_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - V8M_SAttributes *sattrs); + bool secure, V8M_SAttributes *sattrs); /* Cacheability and shareability attributes for a memory access */ typedef struct ARMCacheAttrs { diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure, if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { V8M_SAttributes sattrs = {}; - v8m_security_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, &sattrs); + v8m_security_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, + targets_secure, &sattrs); if (sattrs.ns) { attrs.secure = false; } else if (!targets_secure) { @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, ARMMMUFaultInfo fi = {}; MemTxResult txres; - v8m_security_lookup(env, addr, MMU_INST_FETCH, mmu_idx, &sattrs); + v8m_security_lookup(env, addr, MMU_INST_FETCH, mmu_idx, + regime_is_secure(env, mmu_idx), &sattrs); if (!sattrs.nsc || sattrs.ns) { /* * This must be the second half of the insn, and it straddles a @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) } if (env->v7m.secure) { - v8m_security_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, &sattrs); + v8m_security_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, + targetsec, &sattrs); nsr = sattrs.ns && r; nsrw = sattrs.ns && rw; } else { diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool v8m_is_sau_exempt(CPUARMState *env, } void v8m_security_lookup(CPUARMState *env, uint32_t address, - MMUAccessType access_type, ARMMMUIdx mmu_idx, - V8M_SAttributes *sattrs) + MMUAccessType access_type, ARMMMUIdx mmu_idx, + bool is_secure, V8M_SAttributes *sattrs) { /* * Look up the security attributes for this address. Compare the @@ -XXX,XX +XXX,XX @@ void v8m_security_lookup(CPUARMState *env, uint32_t address, } if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) { - sattrs->ns = !regime_is_secure(env, mmu_idx); + sattrs->ns = !is_secure; return; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, bool ret; if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - v8m_security_lookup(env, address, access_type, mmu_idx, &sattrs); + v8m_security_lookup(env, address, access_type, mmu_idx, + secure, &sattrs); if (access_type == MMU_INST_FETCH) { /* * Instruction fetches always use the MMU bank and the -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove the use of regime_is_secure from pmsav8_mpu_lookup, passing the new parameter to the lookup instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-13-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 4 ++-- target/arm/m_helper.c | 2 +- target/arm/ptw.c | 7 +++---- 3 files changed, 6 insertions(+), 7 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, ARMMMUFaultInfo *fi, - uint32_t *mregion); + bool is_secure, GetPhysAddrResult *result, + ARMMMUFaultInfo *fi, uint32_t *mregion); void arm_log_exception(CPUState *cs); diff --git a/target/arm/m_helper.c b/target/arm/m_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/m_helper.c +++ b/target/arm/m_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) ARMMMUFaultInfo fi = {}; /* We can ignore the return value as prot is always set */ - pmsav8_mpu_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, + pmsav8_mpu_lookup(env, addr, MMU_DATA_LOAD, mmu_idx, targetsec, &res, &fi, &mregion); if (mregion == -1) { mrvalid = false; diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, ARMMMUFaultInfo *fi, - uint32_t *mregion) + bool secure, GetPhysAddrResult *result, + ARMMMUFaultInfo *fi, uint32_t *mregion) { /* * Perform a PMSAv8 MPU lookup (without also doing the SAU check @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, */ ARMCPU *cpu = env_archcpu(env); bool is_user = regime_is_user(env, mmu_idx); - uint32_t secure = regime_is_secure(env, mmu_idx); int n; int matchregion = -1; bool hit = false; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, } } - ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, + ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, secure, result, fi, NULL); if (sattrs.subpage) { result->page_size = 1; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove the use of regime_is_secure from get_phys_addr_v5, passing the new parameter to the lookup instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> [PMM: Folded in definition of local is_secure in get_phys_addr(), since I dropped the earlier patch that would have provided it] Message-id: 20220822152741.1617527-14-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static int simple_ap_to_rw_prot(CPUARMState *env, ARMMMUIdx mmu_idx, int ap) static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, ARMMMUFaultInfo *fi) + bool is_secure, GetPhysAddrResult *result, + ARMMMUFaultInfo *fi) { int level = 1; uint32_t table; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, fi->type = ARMFault_Translation; goto do_fault; } - desc = arm_ldl_ptw(env, table, regime_is_secure(env, mmu_idx), - mmu_idx, fi); + desc = arm_ldl_ptw(env, table, is_secure, mmu_idx, fi); if (fi->type != ARMFault_None) { goto do_fault; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, /* Fine pagetable. */ table = (desc & 0xfffff000) | ((address >> 8) & 0xffc); } - desc = arm_ldl_ptw(env, table, regime_is_secure(env, mmu_idx), - mmu_idx, fi); + desc = arm_ldl_ptw(env, table, is_secure, mmu_idx, fi); if (fi->type != ARMFault_None) { goto do_fault; } @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { ARMMMUIdx s1_mmu_idx = stage_1_mmu_idx(mmu_idx); + bool is_secure = regime_is_secure(env, mmu_idx); if (mmu_idx != s1_mmu_idx) { /* @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, * cannot upgrade an non-secure translation regime's attributes * to secure. */ - result->attrs.secure = regime_is_secure(env, mmu_idx); + result->attrs.secure = is_secure; result->attrs.user = regime_is_user(env, mmu_idx); /* @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, result, fi); } else { return get_phys_addr_v5(env, address, access_type, mmu_idx, - result, fi); + is_secure, result, fi); } } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove the use of regime_is_secure from get_phys_addr_v6, passing the new parameter to the lookup instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-15-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ do_fault: static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, ARMMMUFaultInfo *fi) + bool is_secure, GetPhysAddrResult *result, + ARMMMUFaultInfo *fi) { ARMCPU *cpu = env_archcpu(env); int level = 1; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, fi->type = ARMFault_Translation; goto do_fault; } - desc = arm_ldl_ptw(env, table, regime_is_secure(env, mmu_idx), - mmu_idx, fi); + desc = arm_ldl_ptw(env, table, is_secure, mmu_idx, fi); if (fi->type != ARMFault_None) { goto do_fault; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, ns = extract32(desc, 3, 1); /* Lookup l2 entry. */ table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc); - desc = arm_ldl_ptw(env, table, regime_is_secure(env, mmu_idx), - mmu_idx, fi); + desc = arm_ldl_ptw(env, table, is_secure, mmu_idx, fi); if (fi->type != ARMFault_None) { goto do_fault; } @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, result, fi); } else if (regime_sctlr(env, mmu_idx) & SCTLR_XP) { return get_phys_addr_v6(env, address, access_type, mmu_idx, - result, fi); + is_secure, result, fi); } else { return get_phys_addr_v5(env, address, access_type, mmu_idx, is_secure, result, fi); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove the use of regime_is_secure from get_phys_addr_pmsav8. Since we already had a local variable named secure, use that. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-16-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ void v8m_security_lookup(CPUARMState *env, uint32_t address, static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, + bool secure, GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { - uint32_t secure = regime_is_secure(env, mmu_idx); V8M_SAttributes sattrs = {}; bool ret; @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, if (arm_feature(env, ARM_FEATURE_V8)) { /* PMSAv8 */ ret = get_phys_addr_pmsav8(env, address, access_type, mmu_idx, - result, fi); + is_secure, result, fi); } else if (arm_feature(env, ARM_FEATURE_V7)) { /* PMSAv7 */ ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove the use of regime_is_secure from pmsav7_use_background_region, using the new parameter instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-17-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool m_is_system_region(CPUARMState *env, uint32_t address) } static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx, - bool is_user) + bool is_secure, bool is_user) { /* * Return true if we should use the default memory map as a @@ -XXX,XX +XXX,XX @@ static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx, } if (arm_feature(env, ARM_FEATURE_M)) { - return env->v7m.mpu_ctrl[regime_is_secure(env, mmu_idx)] - & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; + return env->v7m.mpu_ctrl[is_secure] & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; } else { return regime_sctlr(env, mmu_idx) & SCTLR_BR; } @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, { ARMCPU *cpu = env_archcpu(env); int n; + bool secure = regime_is_secure(env, mmu_idx); bool is_user = regime_is_user(env, mmu_idx); result->phys = address; @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, } if (n == -1) { /* no hits */ - if (!pmsav7_use_background_region(cpu, mmu_idx, is_user)) { + if (!pmsav7_use_background_region(cpu, mmu_idx, secure, is_user)) { /* background fault */ fi->type = ARMFault_Background; return true; @@ -XXX,XX +XXX,XX @@ bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, } else if (m_is_ppb_region(env, address)) { hit = true; } else { - if (pmsav7_use_background_region(cpu, mmu_idx, is_user)) { + if (pmsav7_use_background_region(cpu, mmu_idx, secure, is_user)) { hit = true; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove the use of regime_is_secure from get_phys_addr_pmsav7, using the new parameter instead. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-19-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ static bool pmsav7_use_background_region(ARMCPU *cpu, ARMMMUIdx mmu_idx, static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, + bool secure, GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { ARMCPU *cpu = env_archcpu(env); int n; - bool secure = regime_is_secure(env, mmu_idx); bool is_user = regime_is_user(env, mmu_idx); result->phys = address; @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, } else if (arm_feature(env, ARM_FEATURE_V7)) { /* PMSAv7 */ ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, - result, fi); + is_secure, result, fi); } else { /* Pre-v7 MPU */ ret = get_phys_addr_pmsav5(env, address, access_type, mmu_idx, -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Remove the use of regime_is_secure from get_phys_addr_pmsav5. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220822152741.1617527-21-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/ptw.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/ptw.c b/target/arm/ptw.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/ptw.c +++ b/target/arm/ptw.c @@ -XXX,XX +XXX,XX @@ do_fault: static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, - GetPhysAddrResult *result, + bool is_secure, GetPhysAddrResult *result, ARMMMUFaultInfo *fi) { int n; @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, } else { /* Pre-v7 MPU */ ret = get_phys_addr_pmsav5(env, address, access_type, mmu_idx, - result, fi); + is_secure, result, fi); } qemu_log_mask(CPU_LOG_MMU, "PMSA MPU lookup for %s at 0x%08" PRIx32 " mmu_idx %u -> %s (prot %c%c%c)\n", -- 2.25.1 From: Keqian Zhu <zhukeqian1@huawei.com> Setup an ARM virtual machine of machine virt and execute qmp "query-acpi-ospm-status" causes segmentation fault with following dumpstack: #1 0x0000aaaaab64235c in qmp_query_acpi_ospm_status (errp=errp@entry=0xfffffffff030) at ../monitor/qmp-cmds.c:312 #2 0x0000aaaaabfc4e20 in qmp_marshal_query_acpi_ospm_status (args=<optimized out>, ret=0xffffea4ffe90, errp=0xffffea4ffe88) at qapi/qapi-commands-acpi.c:63 #3 0x0000aaaaabff8ba0 in do_qmp_dispatch_bh (opaque=0xffffea4ffe98) at ../qapi/qmp-dispatch.c:128 #4 0x0000aaaaac02e594 in aio_bh_call (bh=0xffffe0004d80) at ../util/async.c:150 #5 aio_bh_poll (ctx=ctx@entry=0xaaaaad0f6040) at ../util/async.c:178 #6 0x0000aaaaac00bd40 in aio_dispatch (ctx=ctx@entry=0xaaaaad0f6040) at ../util/aio-posix.c:421 #7 0x0000aaaaac02e010 in aio_ctx_dispatch (source=0xaaaaad0f6040, callback=<optimized out>, user_data=<optimized out>) at ../util/async.c:320 #8 0x0000fffff76f6884 in g_main_context_dispatch () at /usr/lib64/libglib-2.0.so.0 #9 0x0000aaaaac0452d4 in glib_pollfds_poll () at ../util/main-loop.c:297 #10 os_host_main_loop_wait (timeout=0) at ../util/main-loop.c:320 #11 main_loop_wait (nonblocking=nonblocking@entry=0) at ../util/main-loop.c:596 #12 0x0000aaaaab5c9e50 in qemu_main_loop () at ../softmmu/runstate.c:734 #13 0x0000aaaaab185370 in qemu_main (argc=argc@entry=47, argv=argv@entry=0xfffffffff518, envp=envp@entry=0x0) at ../softmmu/main.c:38 #14 0x0000aaaaab16f99c in main (argc=47, argv=0xfffffffff518) at ../softmmu/main.c:47 Fixes: ebb62075021a ("hw/acpi: Add ACPI Generic Event Device Support") Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20220816094957.31700-1-zhukeqian1@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/acpi/generic_event_device.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/acpi/generic_event_device.c b/hw/acpi/generic_event_device.c index XXXXXXX..XXXXXXX 100644 --- a/hw/acpi/generic_event_device.c +++ b/hw/acpi/generic_event_device.c @@ -XXX,XX +XXX,XX @@ static void acpi_ged_unplug_cb(HotplugHandler *hotplug_dev, } } +static void acpi_ged_ospm_status(AcpiDeviceIf *adev, ACPIOSTInfoList ***list) +{ + AcpiGedState *s = ACPI_GED(adev); + + acpi_memory_ospm_status(&s->memhp_state, list); +} + static void acpi_ged_send_event(AcpiDeviceIf *adev, AcpiEventStatusBits ev) { AcpiGedState *s = ACPI_GED(adev); @@ -XXX,XX +XXX,XX @@ static void acpi_ged_class_init(ObjectClass *class, void *data) hc->unplug_request = acpi_ged_unplug_request_cb; hc->unplug = acpi_ged_unplug_cb; + adevc->ospm_status = acpi_ged_ospm_status; adevc->send_event = acpi_ged_send_event; } -- 2.25.1 From: Lucas Dietrich <ld.adecy@gmail.com> The LAN9118 allows the guest to specify a level for both the TX and RX FIFOs at which an interrupt will be generated. We implement the RSFL_INT interrupt for the RX FIFO but are missing the handling of the equivalent TSFL_INT for the TX FIFO. Add the missing test to set the interrupt if the TX FIFO has exceeded the guest-specified level. This flag is required for Micrium lan911x ethernet driver to work. Signed-off-by: Lucas Dietrich <ld.adecy@gmail.com> [PMM: Tweaked commit message and comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/lan9118.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/net/lan9118.c b/hw/net/lan9118.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/lan9118.c +++ b/hw/net/lan9118.c @@ -XXX,XX +XXX,XX @@ static void do_tx_packet(lan9118_state *s) n = (s->tx_status_fifo_head + s->tx_status_fifo_used) & 511; s->tx_status_fifo[n] = status; s->tx_status_fifo_used++; + + /* + * Generate TSFL interrupt if TX FIFO level exceeds the level + * specified in the FIFO_INT TX Status Level field. + */ + if (s->tx_status_fifo_used > ((s->fifo_int >> 16) & 0xff)) { + s->int_sts |= TSFL_INT; + } if (s->tx_status_fifo_used == 512) { s->int_sts |= TSFF_INT; /* TODO: Stop transmission. */ -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Replace '84' magic value by the X_MAX definition, and '1' by Y_MAX. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-2-peter.maydell@linaro.org --- chardev/baum.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/chardev/baum.c b/chardev/baum.c index XXXXXXX..XXXXXXX 100644 --- a/chardev/baum.c +++ b/chardev/baum.c @@ -XXX,XX +XXX,XX @@ #define BUF_SIZE 256 +#define X_MAX 84 +#define Y_MAX 1 + struct BaumChardev { Chardev parent; @@ -XXX,XX +XXX,XX @@ static int baum_deferred_init(BaumChardev *baum) brlapi_perror("baum: brlapi__getDisplaySize"); return 0; } - if (baum->y > 1) { - baum->y = 1; + if (baum->y > Y_MAX) { + baum->y = Y_MAX; } - if (baum->x > 84) { - baum->x = 84; + if (baum->x > X_MAX) { + baum->x = X_MAX; } con = qemu_console_lookup_by_index(0); -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> We know 'x * y' will be at most 'X_MAX * Y_MAX' (which is not a big value, it is actually 84). Instead of having the compiler use variable-length array, declare an array able to hold the maximum 'x * y'. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-3-peter.maydell@linaro.org --- chardev/baum.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/chardev/baum.c b/chardev/baum.c index XXXXXXX..XXXXXXX 100644 --- a/chardev/baum.c +++ b/chardev/baum.c @@ -XXX,XX +XXX,XX @@ static int baum_eat_packet(BaumChardev *baum, const uint8_t *buf, int len) switch (req) { case BAUM_REQ_DisplayData: { - uint8_t cells[baum->x * baum->y], c; - uint8_t text[baum->x * baum->y]; - uint8_t zero[baum->x * baum->y]; + uint8_t cells[X_MAX * Y_MAX], c; + uint8_t text[X_MAX * Y_MAX]; + uint8_t zero[X_MAX * Y_MAX]; int cursor = BRLAPI_CURSOR_OFF; int i; @@ -XXX,XX +XXX,XX @@ static int baum_eat_packet(BaumChardev *baum, const uint8_t *buf, int len) } timer_del(baum->cellCount_timer); - memset(zero, 0, sizeof(zero)); + memset(zero, 0, baum->x * baum->y); brlapi_writeArguments_t wa = { .displayNumber = BRLAPI_DISPLAY_DEFAULT, -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Use autofree heap allocation instead of variable-length array on the stack. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-4-peter.maydell@linaro.org --- chardev/baum.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/chardev/baum.c b/chardev/baum.c index XXXXXXX..XXXXXXX 100644 --- a/chardev/baum.c +++ b/chardev/baum.c @@ -XXX,XX +XXX,XX @@ static void baum_chr_accept_input(struct Chardev *chr) static void baum_write_packet(BaumChardev *baum, const uint8_t *buf, int len) { Chardev *chr = CHARDEV(baum); - uint8_t io_buf[1 + 2 * len], *cur = io_buf; + g_autofree uint8_t *io_buf = g_malloc(1 + 2 * len); + uint8_t *cur = io_buf; int room; *cur++ = ESC; while (len--) -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The combined_key[... QIO_CHANNEL_WEBSOCK_GUID_LEN ...] array in qio_channel_websock_handshake_send_res_ok() expands to a call to strlen(QIO_CHANNEL_WEBSOCK_GUID), and the compiler doesn't realize the string is const, so consider combined_key[] being a variable-length array. To remove the variable-length array, we provide it a hint to the compiler by using sizeof() - 1 instead of strlen(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-5-peter.maydell@linaro.org --- io/channel-websock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/io/channel-websock.c b/io/channel-websock.c index XXXXXXX..XXXXXXX 100644 --- a/io/channel-websock.c +++ b/io/channel-websock.c @@ -XXX,XX +XXX,XX @@ #define QIO_CHANNEL_WEBSOCK_CLIENT_KEY_LEN 24 #define QIO_CHANNEL_WEBSOCK_GUID "258EAFA5-E914-47DA-95CA-C5AB0DC85B11" -#define QIO_CHANNEL_WEBSOCK_GUID_LEN strlen(QIO_CHANNEL_WEBSOCK_GUID) +#define QIO_CHANNEL_WEBSOCK_GUID_LEN (sizeof(QIO_CHANNEL_WEBSOCK_GUID) - 1) #define QIO_CHANNEL_WEBSOCK_HEADER_PROTOCOL "sec-websocket-protocol" #define QIO_CHANNEL_WEBSOCK_HEADER_VERSION "sec-websocket-version" -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The compiler isn't clever enough to figure 'min_buf_size' is a constant, so help it by using a definitions instead. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-6-peter.maydell@linaro.org --- hw/net/e1000e_core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/hw/net/e1000e_core.c b/hw/net/e1000e_core.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/e1000e_core.c +++ b/hw/net/e1000e_core.c @@ -XXX,XX +XXX,XX @@ e1000e_rx_fix_l4_csum(E1000ECore *core, struct NetRxPkt *pkt) } } +/* Min. octets in an ethernet frame sans FCS */ +#define MIN_BUF_SIZE 60 + ssize_t e1000e_receive_iov(E1000ECore *core, const struct iovec *iov, int iovcnt) { static const int maximum_ethernet_hdr_len = (14 + 4); - /* Min. octets in an ethernet frame sans FCS */ - static const int min_buf_size = 60; uint32_t n = 0; - uint8_t min_buf[min_buf_size]; + uint8_t min_buf[MIN_BUF_SIZE]; struct iovec min_iov; uint8_t *filter_buf; size_t size, orig_size; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Use autofree heap allocation instead of variable-length array on the stack. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-id: 20220819153931.3147384-7-peter.maydell@linaro.org --- hw/ppc/pnv.c | 4 ++-- hw/ppc/spapr.c | 8 ++++---- hw/ppc/spapr_pci_nvlink2.c | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv.c +++ b/hw/ppc/pnv.c @@ -XXX,XX +XXX,XX @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt) int smt_threads = CPU_CORE(pc)->nr_threads; CPUPPCState *env = &cpu->env; PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cs); - uint32_t servers_prop[smt_threads]; + g_autofree uint32_t *servers_prop = g_new(uint32_t, smt_threads); int i; uint32_t segs[] = {cpu_to_be32(28), cpu_to_be32(40), 0xffffffff, 0xffffffff}; @@ -XXX,XX +XXX,XX @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt) servers_prop[i] = cpu_to_be32(pc->pir + i); } _FDT((fdt_setprop(fdt, offset, "ibm,ppc-interrupt-server#s", - servers_prop, sizeof(servers_prop)))); + servers_prop, sizeof(*servers_prop) * smt_threads))); } static void pnv_dt_icp(PnvChip *chip, void *fdt, uint32_t pir, diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr.c +++ b/hw/ppc/spapr.c @@ -XXX,XX +XXX,XX @@ static int spapr_fixup_cpu_smt_dt(void *fdt, int offset, PowerPCCPU *cpu, int smt_threads) { int i, ret = 0; - uint32_t servers_prop[smt_threads]; - uint32_t gservers_prop[smt_threads * 2]; + g_autofree uint32_t *servers_prop = g_new(uint32_t, smt_threads); + g_autofree uint32_t *gservers_prop = g_new(uint32_t, smt_threads * 2); int index = spapr_get_vcpu_id(cpu); if (cpu->compat_pvr) { @@ -XXX,XX +XXX,XX @@ static int spapr_fixup_cpu_smt_dt(void *fdt, int offset, PowerPCCPU *cpu, gservers_prop[i*2 + 1] = 0; } ret = fdt_setprop(fdt, offset, "ibm,ppc-interrupt-server#s", - servers_prop, sizeof(servers_prop)); + servers_prop, sizeof(*servers_prop) * smt_threads); if (ret < 0) { return ret; } ret = fdt_setprop(fdt, offset, "ibm,ppc-interrupt-gserver#s", - gservers_prop, sizeof(gservers_prop)); + gservers_prop, sizeof(*gservers_prop) * smt_threads * 2); return ret; } diff --git a/hw/ppc/spapr_pci_nvlink2.c b/hw/ppc/spapr_pci_nvlink2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr_pci_nvlink2.c +++ b/hw/ppc/spapr_pci_nvlink2.c @@ -XXX,XX +XXX,XX @@ void spapr_phb_nvgpu_populate_pcidev_dt(PCIDevice *dev, void *fdt, int offset, continue; } if (dev == nvslot->gpdev) { - uint32_t npus[nvslot->linknum]; + g_autofree uint32_t *npus = g_new(uint32_t, nvslot->linknum); for (j = 0; j < nvslot->linknum; ++j) { PCIDevice *npdev = nvslot->links[j].npdev; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Use autofree heap allocation instead of variable-length array on the stack. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-8-peter.maydell@linaro.org --- hw/intc/xics.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/xics.c b/hw/intc/xics.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/xics.c +++ b/hw/intc/xics.c @@ -XXX,XX +XXX,XX @@ static void ics_reset_irq(ICSIRQState *irq) static void ics_reset(DeviceState *dev) { ICSState *ics = ICS(dev); + g_autofree uint8_t *flags = g_malloc(ics->nr_irqs); int i; - uint8_t flags[ics->nr_irqs]; for (i = 0; i < ics->nr_irqs; i++) { flags[i] = ics->irqs[i].flags; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Use autofree heap allocation instead of variable-length array on the stack. Replace the snprintf() call by g_strdup_printf(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-9-peter.maydell@linaro.org --- hw/i386/multiboot.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/i386/multiboot.c b/hw/i386/multiboot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/multiboot.c +++ b/hw/i386/multiboot.c @@ -XXX,XX +XXX,XX @@ int load_multiboot(X86MachineState *x86ms, uint8_t *mb_bootinfo_data; uint32_t cmdline_len; GList *mods = NULL; + g_autofree char *kcmdline = NULL; /* Ok, let's see if it is a multiboot image. The header is 12x32bit long, so the latest entry may be 8192 - 48. */ @@ -XXX,XX +XXX,XX @@ int load_multiboot(X86MachineState *x86ms, } /* Commandline support */ - char kcmdline[strlen(kernel_filename) + strlen(kernel_cmdline) + 2]; - snprintf(kcmdline, sizeof(kcmdline), "%s %s", - kernel_filename, kernel_cmdline); + kcmdline = g_strdup_printf("%s %s", kernel_filename, kernel_cmdline); stl_p(bootinfo + MBI_CMDLINE, mb_add_cmdline(&mbs, kcmdline)); stl_p(bootinfo + MBI_BOOTLOADER, mb_add_bootloader(&mbs, bootloader_name)); -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The compiler isn't clever enough to figure 'width' is a constant, so help it by using a definitions instead. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-10-peter.maydell@linaro.org --- hw/usb/hcd-ohci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/hw/usb/hcd-ohci.c b/hw/usb/hcd-ohci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/usb/hcd-ohci.c +++ b/hw/usb/hcd-ohci.c @@ -XXX,XX +XXX,XX @@ static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed) return 1; } +#define HEX_CHAR_PER_LINE 16 + static void ohci_td_pkt(const char *msg, const uint8_t *buf, size_t len) { bool print16; bool printall; - const int width = 16; int i; - char tmp[3 * width + 1]; + char tmp[3 * HEX_CHAR_PER_LINE + 1]; char *p = tmp; print16 = !!trace_event_get_state_backends(TRACE_USB_OHCI_TD_PKT_SHORT); @@ -XXX,XX +XXX,XX @@ static void ohci_td_pkt(const char *msg, const uint8_t *buf, size_t len) } for (i = 0; ; i++) { - if (i && (!(i % width) || (i == len))) { + if (i && (!(i % HEX_CHAR_PER_LINE) || (i == len))) { if (!printall) { trace_usb_ohci_td_pkt_short(msg, tmp); break; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Use autofree heap allocation instead of variable-length array on the stack. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-11-peter.maydell@linaro.org --- ui/curses.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ui/curses.c b/ui/curses.c index XXXXXXX..XXXXXXX 100644 --- a/ui/curses.c +++ b/ui/curses.c @@ -XXX,XX +XXX,XX @@ static void curses_update(DisplayChangeListener *dcl, int x, int y, int w, int h) { console_ch_t *line; - cchar_t curses_line[width]; + g_autofree cchar_t *curses_line = g_new(cchar_t, width); wchar_t wch[CCHARW_MAX]; attr_t attrs; short colors; -- 2.25.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Use autofree heap allocation instead of variable-length array on the stack. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220819153931.3147384-12-peter.maydell@linaro.org --- tests/unit/test-vmstate.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/tests/unit/test-vmstate.c b/tests/unit/test-vmstate.c index XXXXXXX..XXXXXXX 100644 --- a/tests/unit/test-vmstate.c +++ b/tests/unit/test-vmstate.c @@ -XXX,XX +XXX,XX @@ static void save_buffer(const uint8_t *buf, size_t buf_size) static void compare_vmstate(const uint8_t *wire, size_t size) { QEMUFile *f = open_test_file(false); - uint8_t result[size]; + g_autofree uint8_t *result = g_malloc(size); /* read back as binary */ - g_assert_cmpint(qemu_get_buffer(f, result, sizeof(result)), ==, - sizeof(result)); + g_assert_cmpint(qemu_get_buffer(f, result, size), ==, size); g_assert(!qemu_file_get_error(f)); /* Compare that what is on the file is the same that what we expected to be there */ - SUCCESS(memcmp(result, wire, sizeof(result))); + SUCCESS(memcmp(result, wire, size)); /* Must reach EOF */ qemu_get_byte(f); -- 2.25.1 Shellcheck correctly reports that we set python_version and never use it. This is a leftover from commit f9332757898a7: we used to use python_version purely to as part of the summary information printed at the end of a configure run, and that commit changed to printing the information from meson (which looks up the python version itself). Remove the unused variable. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220825150703.4074125-2-peter.maydell@linaro.org --- configure | 3 --- 1 file changed, 3 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if ! $python -c 'import sys; sys.exit(sys.version_info < (3,6))'; then "Use --python=/path/to/python to specify a supported Python." fi -# Preserve python version since some functionality is dependent on it -python_version=$($python -c 'import sys; print("%d.%d.%d" % (sys.version_info[0], sys.version_info[1], sys.version_info[2]))' 2>/dev/null) - # Suppress writing compiled files python="$python -B" -- 2.25.1 The meson_args variable was added in commit 3b4da13293482134b, but was not used in that commit and isn't used today. Delete the unnecessary assignment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220825150703.4074125-3-peter.maydell@linaro.org --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ pie="" coroutine="" plugins="$default_feature" meson="" -meson_args="" ninja="" bindir="bin" skip_meson=no -- 2.25.1 This commit adds quotes in some places which: * are spotted by shellcheck * are obviously incorrect * are easy to fix just by adding the quotes It doesn't attempt fix all of the places shellcheck finds errors, or even all the ones which are easy to fix. It's just a random sampling which is hopefully easy to review and which cuts down the size of the problem for next time somebody wants to try to look at shellcheck errors. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220825150703.4074125-4-peter.maydell@linaro.org --- configure | 64 +++++++++++++++++++++++++++---------------------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ GNUmakefile: ; EOF cd build - exec $source_path/configure "$@" + exec "$source_path/configure" "$@" fi # Temporary directory used for files created while @@ -XXX,XX +XXX,XX @@ meson_option_build_array() { printf ']\n' } -. $source_path/scripts/meson-buildoptions.sh +. "$source_path/scripts/meson-buildoptions.sh" meson_options= meson_option_add() { @@ -XXX,XX +XXX,XX @@ for opt do case "$opt" in --help|-h) show_help=yes ;; - --version|-V) exec cat $source_path/VERSION + --version|-V) exec cat "$source_path/VERSION" ;; --prefix=*) prefix="$optarg" ;; @@ -XXX,XX +XXX,XX @@ default_target_list="" mak_wilds="" if [ "$linux_user" != no ]; then - if [ "$targetos" = linux ] && [ -d $source_path/linux-user/include/host/$cpu ]; then + if [ "$targetos" = linux ] && [ -d "$source_path/linux-user/include/host/$cpu" ]; then linux_user=yes elif [ "$linux_user" = yes ]; then error_exit "linux-user not supported on this architecture" @@ -XXX,XX +XXX,XX @@ if [ "$bsd_user" != no ]; then if [ "$bsd_user" = "" ]; then test $targetos = freebsd && bsd_user=yes fi - if [ "$bsd_user" = yes ] && ! [ -d $source_path/bsd-user/$targetos ]; then + if [ "$bsd_user" = yes ] && ! [ -d "$source_path/bsd-user/$targetos" ]; then error_exit "bsd-user not supported on this host OS" fi fi @@ -XXX,XX +XXX,XX @@ python="$python -B" if test -z "$meson"; then if test "$explicit_python" = no && has meson && version_ge "$(meson --version)" 0.59.3; then meson=meson - elif test $git_submodules_action != 'ignore' ; then + elif test "$git_submodules_action" != 'ignore' ; then meson=git elif test -e "${source_path}/meson/meson.py" ; then meson=internal @@ -XXX,XX +XXX,XX @@ esac container="no" if test $use_containers = "yes"; then if has "docker" || has "podman"; then - container=$($python $source_path/tests/docker/docker.py probe) + container=$($python "$source_path"/tests/docker/docker.py probe) fi fi @@ -XXX,XX +XXX,XX @@ if test "$QEMU_GA_DISTRO" = ""; then QEMU_GA_DISTRO=Linux fi if test "$QEMU_GA_VERSION" = ""; then - QEMU_GA_VERSION=$(cat $source_path/VERSION) + QEMU_GA_VERSION=$(cat "$source_path"/VERSION) fi @@ -XXX,XX +XXX,XX @@ fi for target in $target_list; do target_dir="$target" target_name=$(echo $target | cut -d '-' -f 1)$EXESUF - mkdir -p $target_dir + mkdir -p "$target_dir" case $target in *-user) symlink "../qemu-$target_name" "$target_dir/qemu-$target_name" ;; *) symlink "../qemu-system-$target_name" "$target_dir/qemu-system-$target_name" ;; @@ -XXX,XX +XXX,XX @@ for target in $target_list; do config_target_mak=tests/tcg/config-$target.mak echo "# Automatically generated by configure - do not modify" > $config_target_mak - echo "TARGET_NAME=$arch" >> $config_target_mak + echo "TARGET_NAME=$arch" >> "$config_target_mak" case $target in xtensa*-linux-user) # the toolchain is not complete with headers, only build softmmu tests continue ;; *-softmmu) - test -f $source_path/tests/tcg/$arch/Makefile.softmmu-target || continue + test -f "$source_path/tests/tcg/$arch/Makefile.softmmu-target" || continue qemu="qemu-system-$arch" ;; *-linux-user|*-bsd-user) @@ -XXX,XX +XXX,XX @@ for target in $target_list; do # compilers is a requirememt for adding a new test that needs a # compiler feature. - echo "BUILD_STATIC=$build_static" >> $config_target_mak - write_target_makefile >> $config_target_mak + echo "BUILD_STATIC=$build_static" >> "$config_target_mak" + write_target_makefile >> "$config_target_mak" case $target in aarch64-*) if do_compiler "$target_cc" $target_cflags \ -march=armv8.1-a+sve -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_SVE=y" >> $config_target_mak + echo "CROSS_CC_HAS_SVE=y" >> "$config_target_mak" fi if do_compiler "$target_cc" $target_cflags \ -march=armv8.1-a+sve2 -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_SVE2=y" >> $config_target_mak + echo "CROSS_CC_HAS_SVE2=y" >> "$config_target_mak" fi if do_compiler "$target_cc" $target_cflags \ -march=armv8.3-a -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak + echo "CROSS_CC_HAS_ARMV8_3=y" >> "$config_target_mak" fi if do_compiler "$target_cc" $target_cflags \ -mbranch-protection=standard -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak + echo "CROSS_CC_HAS_ARMV8_BTI=y" >> "$config_target_mak" fi if do_compiler "$target_cc" $target_cflags \ -march=armv8.5-a+memtag -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_ARMV8_MTE=y" >> $config_target_mak + echo "CROSS_CC_HAS_ARMV8_MTE=y" >> "$config_target_mak" fi ;; ppc*) if do_compiler "$target_cc" $target_cflags \ -mpower8-vector -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> $config_target_mak + echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> "$config_target_mak" fi if do_compiler "$target_cc" $target_cflags \ -mpower10 -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_POWER10=y" >> $config_target_mak + echo "CROSS_CC_HAS_POWER10=y" >> "$config_target_mak" fi ;; i386-linux-user) if do_compiler "$target_cc" $target_cflags \ -Werror -fno-pie -o $TMPE $TMPC; then - echo "CROSS_CC_HAS_I386_NOPIE=y" >> $config_target_mak + echo "CROSS_CC_HAS_I386_NOPIE=y" >> "$config_target_mak" fi ;; esac elif test -n "$container_image"; then echo "build-tcg-tests-$target: docker-image-$container_image" >> $makefile - echo "BUILD_STATIC=y" >> $config_target_mak - write_container_target_makefile >> $config_target_mak + echo "BUILD_STATIC=y" >> "$config_target_mak" + write_container_target_makefile >> "$config_target_mak" case $target in aarch64-*) - echo "CROSS_CC_HAS_SVE=y" >> $config_target_mak - echo "CROSS_CC_HAS_SVE2=y" >> $config_target_mak - echo "CROSS_CC_HAS_ARMV8_3=y" >> $config_target_mak - echo "CROSS_CC_HAS_ARMV8_BTI=y" >> $config_target_mak - echo "CROSS_CC_HAS_ARMV8_MTE=y" >> $config_target_mak + echo "CROSS_CC_HAS_SVE=y" >> "$config_target_mak" + echo "CROSS_CC_HAS_SVE2=y" >> "$config_target_mak" + echo "CROSS_CC_HAS_ARMV8_3=y" >> "$config_target_mak" + echo "CROSS_CC_HAS_ARMV8_BTI=y" >> "$config_target_mak" + echo "CROSS_CC_HAS_ARMV8_MTE=y" >> "$config_target_mak" ;; ppc*) - echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> $config_target_mak - echo "CROSS_CC_HAS_POWER10=y" >> $config_target_mak + echo "CROSS_CC_HAS_POWER8_VECTOR=y" >> "$config_target_mak" + echo "CROSS_CC_HAS_POWER10=y" >> "$config_target_mak" ;; i386-linux-user) - echo "CROSS_CC_HAS_I386_NOPIE=y" >> $config_target_mak + echo "CROSS_CC_HAS_I386_NOPIE=y" >> "$config_target_mak" ;; esac got_cross_cc=yes fi if test $got_cross_cc = yes; then mkdir -p tests/tcg/$target - echo "QEMU=$PWD/$qemu" >> $config_target_mak + echo "QEMU=$PWD/$qemu" >> "$config_target_mak" echo "run-tcg-tests-$target: $qemu\$(EXESUF)" >> $makefile tcg_tests_targets="$tcg_tests_targets $target" fi -- 2.25.1 Shellcheck warns that in rm -f */config-devices.mak.d the glob might expand to something with a '-' in it, which would then be misinterpreted as an option to rm. Fix this by adding './'. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220825150703.4074125-5-peter.maydell@linaro.org --- configure | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ exit 0 fi # Remove old dependency files to make sure that they get properly regenerated -rm -f */config-devices.mak.d +rm -f ./*/config-devices.mak.d if test -z "$python" then -- 2.25.1 There's only one place in configure where we use `...` to execute a command and capture the result. Switch to $() to match the rest of the script. This silences a shellcheck warning. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220825150703.4074125-6-peter.maydell@linaro.org --- configure | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ LINKS="$LINKS python" LINKS="$LINKS contrib/plugins/Makefile " for f in $LINKS ; do if [ -e "$source_path/$f" ]; then - mkdir -p `dirname ./$f` + mkdir -p "$(dirname ./"$f")" symlink "$source_path/$f" "$f" fi done -- 2.25.1 Shellcheck warns that we have one place where we run a command and then check if it failed using $?; this is better written to simply check the command in the 'if' statement directly. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220825150703.4074125-7-peter.maydell@linaro.org --- configure | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # it when configure exits.) TMPDIR1="config-temp" rm -rf "${TMPDIR1}" -mkdir -p "${TMPDIR1}" -if [ $? -ne 0 ]; then +if ! mkdir -p "${TMPDIR1}"; then echo "ERROR: failed to create temporary directory" exit 1 fi -- 2.25.1 We use the non-POSIX 'local' keyword in just two places in configure; rewrite to avoid it. In do_compiler(), just drop the 'local' keyword. The variable 'compiler' is only used elsewhere in the do_compiler_werror() function, which already uses the variable as a normal non-local one. In probe_target_compiler(), $try and $t are both local; make them normal variables and use a more obviously distinct variable name for $t. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20220825150703.4074125-8-peter.maydell@linaro.org --- configure | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ error_exit() { do_compiler() { # Run the compiler, capturing its output to the log. First argument # is compiler binary to execute. - local compiler="$1" + compiler="$1" shift if test -n "$BASH_VERSION"; then eval ' echo >>config.log " @@ -XXX,XX +XXX,XX @@ probe_target_compiler() { : ${container_cross_strip:=${container_cross_prefix}strip} done - local t try try=cross case "$target_arch:$cpu" in aarch64_be:aarch64 | \ @@ -XXX,XX +XXX,XX @@ probe_target_compiler() { try='native cross' ;; esac eval "target_cflags=\${cross_cc_cflags_$target_arch}" - for t in $try; do - case $t in + for thistry in $try; do + case $thistry in native) target_cc=$cc target_ccas=$ccas -- 2.25.1 Hi; here's the latest round of arm patches. I have included also my patchset for the RTC devices to avoid keeping time_t and time_t diffs in 32-bit variables. thanks -- PMM The following changes since commit 156618d9ea67f2f2e31d9dedd97f2dcccbe6808c: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-08-30 09:20:27 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230831 for you to fetch changes up to e73b8bb8a3e9a162f70e9ffbf922d4fafc96bbfb: hw/arm: Set number of MPU regions correctly for an505, an521, an524 (2023-08-31 11:07:02 +0100) ---------------------------------------------------------------- target-arm queue: * Some of the preliminary patches for Cortex-A710 support * i.MX7 and i.MX6UL refactoring * Implement SRC device for i.MX7 * Catch illegal-exception-return from EL3 with bad NSE/NS * Use 64-bit offsets for holding time_t differences in RTC devices * Model correct number of MPU regions for an505, an521, an524 boards ---------------------------------------------------------------- Alex Bennée (1): target/arm: properly document FEAT_CRC32 Jean-Christophe Dubois (6): Remove i.MX7 IOMUX GPR device from i.MX6UL Refactor i.MX6UL processor code Add i.MX6UL missing devices. Refactor i.MX7 processor code Add i.MX7 missing TZ devices and memory regions Add i.MX7 SRC device implementation Peter Maydell (8): target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm() hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference rtc: Use time_t for passing and returning time offsets target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties hw/arm: Set number of MPU regions correctly for an505, an521, an524 Richard Henderson (9): target/arm: Reduce dcz_blocksize to uint8_t target/arm: Allow cpu to configure GM blocksize target/arm: Support more GM blocksizes target/arm: When tag memory is not present, set MTE=1 target/arm: Introduce make_ccsidr64 target/arm: Apply access checks to neoverse-n1 special registers target/arm: Apply access checks to neoverse-v1 special registers target/arm: Suppress FEAT_TRBE (Trace Buffer Extension) target/arm: Implement FEAT_HPDS2 as a no-op docs/system/arm/emulation.rst | 2 + include/hw/arm/armsse.h | 5 + include/hw/arm/armv7m.h | 8 + include/hw/arm/fsl-imx6ul.h | 158 ++++++++++++++++--- include/hw/arm/fsl-imx7.h | 338 ++++++++++++++++++++++++++++++----------- include/hw/misc/imx7_src.h | 66 ++++++++ include/hw/rtc/aspeed_rtc.h | 2 +- include/sysemu/rtc.h | 4 +- target/arm/cpregs.h | 2 + target/arm/cpu.h | 5 +- target/arm/internals.h | 6 - target/arm/tcg/translate.h | 2 + hw/arm/armsse.c | 16 ++ hw/arm/armv7m.c | 21 +++ hw/arm/fsl-imx6ul.c | 174 +++++++++++++-------- hw/arm/fsl-imx7.c | 201 +++++++++++++++++++----- hw/arm/mps2-tz.c | 29 ++++ hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++ hw/rtc/aspeed_rtc.c | 5 +- hw/rtc/m48t59.c | 2 +- hw/rtc/twl92230.c | 4 +- softmmu/rtc.c | 4 +- target/arm/cpu.c | 207 ++++++++++++++----------- target/arm/helper.c | 15 +- target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 102 +++++++++---- target/arm/tcg/helper-a64.c | 9 ++ target/arm/tcg/mte_helper.c | 90 ++++++++--- target/arm/tcg/translate-a64.c | 5 +- hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 31 files changed, 1393 insertions(+), 372 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c From: Richard Henderson <richard.henderson@linaro.org> This value is only 4 bits wide. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230811214031.171020-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool prop_lpa2; /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ - uint32_t dcz_blocksize; + uint8_t dcz_blocksize; + uint64_t rvbar_prop; /* Property/input signals. */ /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we hard-coded the blocksize with GMID_EL1_BS. But the value we choose for -cpu max does not match the value that cortex-a710 uses. Mirror the way we handle dcz_blocksize. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230811214031.171020-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 6 ----- target/arm/tcg/translate.h | 2 ++ target/arm/helper.c | 11 +++++--- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/mte_helper.c | 46 ++++++++++++++++++++++------------ target/arm/tcg/translate-a64.c | 5 ++-- 7 files changed, 45 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint8_t dcz_blocksize; + /* GM blocksize, in log_2(words), ie low 4 bits of GMID_EL0 */ + uint8_t gm_blocksize; uint64_t rvbar_prop; /* Property/input signals. */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs); #endif /* !CONFIG_USER_ONLY */ -/* - * The log2 of the words in the tag block, for GMID_EL1.BS. - * The is the maximum, 256 bytes, which manipulates 64-bits of tags. - */ -#define GMID_EL1_BS 6 - /* * SVE predicates are 1/8 the size of SVE vectors, and cannot use * the same simd_desc() encoding due to restrictions on size. diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.h +++ b/target/arm/tcg/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int8_t btype; /* A copy of cpu->dcz_blocksize. */ uint8_t dcz_blocksize; + /* A copy of cpu->gm_blocksize. */ + uint8_t gm_blocksize; /* True if this page is guarded. */ bool guarded_page; /* Bottom two bits of XScale c15_cpar coprocessor access control reg */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, .access = PL1_RW, .accessfn = access_mte, .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, - { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, - .access = PL1_R, .accessfn = access_aa64_tid5, - .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, { .name = "TCO", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, .type = ARM_CP_NO_RAW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * then define only a RAZ/WI version of PSTATE.TCO. */ if (cpu_isar_feature(aa64_mte, cpu)) { + ARMCPRegInfo gmid_reginfo = { + .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL1_R, .accessfn = access_aa64_tid5, + .type = ARM_CP_CONST, .resetvalue = cpu->gm_blocksize, + }; + define_one_arm_cp_reg(cpu, &gmid_reginfo); define_arm_cp_regs(cpu, mte_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + cpu->gm_blocksize = 6; /* 256 bytes */ cpu->sve_vq.supported = MAKE_64BIT_MASK(0, ARM_MAX_VQ); cpu->sme_vq.supported = SVE_VQ_POW2_MAP; diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(st2g_stub)(CPUARMState *env, uint64_t ptr) } } -#define LDGM_STGM_SIZE (4 << GMID_EL1_BS) - uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_LOAD, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* The tag is squashed to zero if the page does not support tags. */ if (!tag_mem) { return 0; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are loading 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - return ldq_le_p(tag_mem); + switch (gm_bs) { + case 6: + /* 256 bytes -> 16 tags -> 64 result bits */ + return ldq_le_p(tag_mem); + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_STORE, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* * Tag store only happens if the page support tags, @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are storing 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - stq_le_p(tag_mem, val); + switch (gm_bs) { + case 6: + stq_le_p(tag_mem, val); + break; + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STGM(DisasContext *s, arg_ldst_tag *a) gen_helper_stgm(cpu_env, addr, tcg_rt); } else { MMUAccessType acc = MMU_DATA_STORE; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static bool trans_LDGM(DisasContext *s, arg_ldst_tag *a) gen_helper_ldgm(tcg_rt, cpu_env, addr); } else { MMUAccessType acc = MMU_DATA_LOAD; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->cp_regs = arm_cpu->cp_regs; dc->features = env->features; dc->dcz_blocksize = arm_cpu->dcz_blocksize; + dc->gm_blocksize = arm_cpu->gm_blocksize; #ifdef CONFIG_USER_ONLY /* In sve_probe_page, we assume TBI is enabled. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Support all of the easy GM block sizes. Use direct memory operations, since the pointers are aligned. While BS=2 (16 bytes, 1 tag) is a legal setting, that requires an atomic store of one nibble. This is not difficult, but there is also no point in supporting it until required. Note that cortex-a710 sets GM blocksize to match its cacheline size of 64 bytes. I expect many implementations will also match the cacheline, which makes 16 bytes very unlikely. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 18 +++++++++--- target/arm/tcg/mte_helper.c | 56 +++++++++++++++++++++++++++++++------ 2 files changed, 62 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) ID_PFR1, VIRTUALIZATION, 0); } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* + * The architectural range of GM blocksize is 2-6, however qemu + * doesn't support blocksize of 2 (see HELPER(ldgm)). + */ + if (tcg_enabled()) { + assert(cpu->gm_blocksize >= 3 && cpu->gm_blocksize <= 6); + } + #ifndef CONFIG_USER_ONLY - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) { /* * Disable the MTE feature bits if we do not have tag-memory * provided by the machine. */ - cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); - } + if (cpu->tag_memory == NULL) { + cpu->isar.id_aa64pfr1 = + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + } #endif + } if (tcg_enabled()) { /* diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + uint64_t ret; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) /* * The ordering of elements within the word corresponds to - * a little-endian operation. + * a little-endian operation. Computation of shift comes from + * + * index = address<LOG2_TAG_GRANULE+3:LOG2_TAG_GRANULE> + * data<index*4+3:index*4> = tag + * + * Because of the alignment of ptr above, BS=6 has shift=0. + * All memory operations are aligned. Defer support for BS=2, + * requiring insertion or extraction of a nibble, until we + * support a cpu that requires it. */ switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + ret = *(uint8_t *)tag_mem; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + ret = cpu_to_le16(*(uint16_t *)tag_mem); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + ret = cpu_to_le32(*(uint32_t *)tag_mem); + break; case 6: /* 256 bytes -> 16 tags -> 64 result bits */ - return ldq_le_p(tag_mem); + return cpu_to_le64(*(uint64_t *)tag_mem); default: - /* cpu configured with unsupported gm blocksize. */ + /* + * CPU configured with unsupported/invalid gm blocksize. + * This is detected early in arm_cpu_realizefn. + */ g_assert_not_reached(); } + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + return ret << shift; } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - /* - * The ordering of elements within the word corresponds to - * a little-endian operation. - */ + /* See LDGM for comments on BS and on shift. */ + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + val >>= shift; switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + *(uint8_t *)tag_mem = val; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + *(uint16_t *)tag_mem = cpu_to_le16(val); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + *(uint32_t *)tag_mem = cpu_to_le32(val); + break; case 6: - stq_le_p(tag_mem, val); + /* 256 bytes -> 16 tags -> 64 result bits */ + *(uint64_t *)tag_mem = cpu_to_le64(val); break; default: /* cpu configured with unsupported gm blocksize. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When the cpu support MTE, but the system does not, reduce cpu support to user instructions at EL0 instead of completely disabling MTE. If we encounter a cpu implementation which does something else, we can revisit this setting. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) #ifndef CONFIG_USER_ONLY /* - * Disable the MTE feature bits if we do not have tag-memory - * provided by the machine. + * If we do not have tag-memory provided by the machine, + * reduce MTE support to instructions enabled at EL0. + * This matches Cortex-A710 BROADCASTMTE input being LOW. */ if (cpu->tag_memory == NULL) { cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 1); } #endif } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Do not hard-code the constants for Neoverse V1. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 48 ++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" +#include "qemu/units.h" #include "internals.h" #include "cpregs.h" +static uint64_t make_ccsidr64(unsigned assoc, unsigned linesize, + unsigned cachesize) +{ + unsigned lg_linesize = ctz32(linesize); + unsigned sets; + + /* + * The 64-bit CCSIDR_EL1 format is: + * [55:32] number of sets - 1 + * [23:3] associativity - 1 + * [2:0] log2(linesize) - 4 + * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc + */ + assert(assoc != 0); + assert(is_power_of_2(linesize)); + assert(lg_linesize >= 4 && lg_linesize <= 7 + 4); + + /* sets * associativity * linesize == cachesize. */ + sets = cachesize / (assoc * linesize); + assert(cachesize % (assoc * linesize) == 0); + + return ((uint64_t)(sets - 1) << 32) + | ((assoc - 1) << 3) + | (lg_linesize - 4); +} + static void aarch64_a35_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_neoverse_v1_initfn(Object *obj) * The Neoverse-V1 r1p2 TRM lists 32-bit format CCSIDR_EL1 values, * but also says it implements CCIDX, which means they should be * 64-bit format. So we here use values which are based on the textual - * information in chapter 2 of the TRM (and on the fact that - * sets * associativity * linesize == cachesize). - * - * The 64-bit CCSIDR_EL1 format is: - * [55:32] number of sets - 1 - * [23:3] associativity - 1 - * [2:0] log2(linesize) - 4 - * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc - * - * L1: 4-way set associative 64-byte line size, total size 64K, - * so sets is 256. + * information in chapter 2 of the TRM: * + * L1: 4-way set associative 64-byte line size, total size 64K. * L2: 8-way set associative, 64 byte line size, either 512K or 1MB. - * We pick 1MB, so this has 2048 sets. - * * L3: No L3 (this matches the CLIDR_EL1 value). */ - cpu->ccsidr[0] = 0x000000ff0000001aull; /* 64KB L1 dcache */ - cpu->ccsidr[1] = 0x000000ff0000001aull; /* 64KB L1 icache */ - cpu->ccsidr[2] = 0x000007ff0000003aull; /* 1MB L2 cache */ + cpu->ccsidr[0] = make_ccsidr64(4, 64, 64 * KiB); /* L1 dcache */ + cpu->ccsidr[1] = cpu->ccsidr[0]; /* L1 icache */ + cpu->ccsidr[2] = make_ccsidr64(8, 64, 1 * MiB); /* L2 cache */ /* From 3.2.115 SCTLR_EL3 */ cpu->reset_sctlr = 0x30c50838; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Access to many of the special registers is enabled or disabled by ACTLR_EL[23], which we implement as constant 0, which means that all writes outside EL3 should trap. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 2 ++ target/arm/helper.c | 4 ++-- target/arm/tcg/cpu64.c | 46 +++++++++++++++++++++++++++++++++--------- 3 files changed, 41 insertions(+), 11 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +CPAccessResult access_tvm_trvm(CPUARMState *, const ARMCPRegInfo *, bool); + #endif /* TARGET_ARM_CPREGS_H */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, } /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ -static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) +CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) { if (arm_current_el(env) == 1) { uint64_t trap = isread ? HCR_TRVM : HCR_TVM; diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a64fx_initfn(Object *obj) /* TODO: Add A64FX specific HPC extension registers */ } +static CPAccessResult access_actlr_w(CPUARMState *env, const ARMCPRegInfo *r, + bool read) +{ + if (!read) { + int el = arm_current_el(env); + + /* Because ACTLR_EL2 is constant 0, writes below EL2 trap to EL2. */ + if (el < 2 && arm_is_el2_enabled(env)) { + return CP_ACCESS_TRAP_EL2; + } + /* Because ACTLR_EL3 is constant 0, writes below EL3 trap to EL3. */ + if (el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + return CP_ACCESS_TRAP_EL3; + } + } + return CP_ACCESS_OK; +} + static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { { .name = "ATCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 7, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + /* Traps and enables are the same as for TCR_EL1. */ + .accessfn = access_tvm_trvm, .fgt = FGT_TCR_EL1, }, { .name = "ATCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 15, .crm = 7, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR3_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, /* * Report CPUCFR_EL1.SCU as 1, as we do not implement the DSU * (and in particular its system registers). @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 4 }, { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 4, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010, + .accessfn = access_actlr_w }, { .name = "CPUPCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 8, .opc2 = 1, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUPWRCTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCDN_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCTL_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGF_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, }; static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> There is only one additional EL1 register modeled, which also needs to use access_actlr_w. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) static const ARMCPRegInfo neoverse_v1_cp_reginfo[] = { { .name = "CPUECTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 5, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUPPMCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 2, .opc2 = 0, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing external to the cpu, which is out of scope for QEMU. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* FEAT_SPE (Statistical Profiling Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, PMSVER, 0); + /* FEAT_TRBE (Trace Buffer Extension) */ + cpu->isar.id_aa64dfr0 = + FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEBUFFER, 0); /* FEAT_TRF (Self-hosted Trace Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEFILT, 0); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This feature allows the operating system to set TCR_ELx.HWU* to allow the implementation to use the PBHA bits from the block and page descriptors for for IMPLEMENTATION DEFINED purposes. Since QEMU has no need to use these bits, we may simply ignore them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HAFDBS (Hardware management of the access flag and dirty bit state) - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) +- FEAT_HPDS2 (Translation table page-based hardware attributes) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR1, HAFDBS, 2); /* FEAT_HAFDBS */ t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 3); /* FEAT_PAN3 */ t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> This is a mandatory feature for Armv8.1 architectures but we don't state the feature clearly in our emulation list. Also include FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org Cc: qemu-stable@nongnu.org Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org> [PMM: pluralize 'instructions' in docs] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CRC32 (CRC32 instructions) - FEAT_CSV2 (Cache speculation variant 2) - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ - t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); /* FEAT_CRC32 */ t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> i.MX7 IOMUX GPR device is not equivalent to i.MX6UL IOMUXC GPR device. In particular, register 22 is not present on i.MX6UL and this is actualy The only register that is really emulated in the i.MX7 IOMUX GPR device. Note: The i.MX6UL code is actually also implementing the IOMUX GPR device as an unimplemented device at the same bus adress and the 2 instantiations were actualy colliding. So we go back to the unimplemented device for now. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 48681bf51ee97646479bb261bee19abebbc8074e.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 -- hw/arm/fsl-imx6ul.c | 11 ----------- 2 files changed, 13 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx6ul_ccm.h" #include "hw/misc/imx6_src.h" #include "hw/misc/imx7_snvs.h" -#include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX6SRCState src; IMX7SNVSState snvs; IMXGPCv2State gpcv2; - IMX7GPRState gpr; IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); - /* - * GPR - */ - object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); - /* * GPIOs 1 to 5 */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOGn_IRQ[i])); } - /* - * GPR - */ - sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); - /* * SDMA */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for most i.MX6UL devices in i.MX6UL header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: d579043fbd4e4b490370783fda43fc02c8e9be75.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 156 +++++++++++++++++++++++++++++++----- hw/arm/fsl-imx6ul.c | 147 ++++++++++++++++++++++----------- 2 files changed, 232 insertions(+), 71 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX6UL "fsl-imx6ul" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX6ULState, FSL_IMX6UL) @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_ADCS = 2, FSL_IMX6UL_NUM_USB_PHYS = 2, FSL_IMX6UL_NUM_USBS = 2, + FSL_IMX6UL_NUM_SAIS = 3, + FSL_IMX6UL_NUM_CANS = 2, + FSL_IMX6UL_NUM_PWMS = 4, }; struct FslIMX6ULState { @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { enum FslIMX6ULMemoryMap { FSL_IMX6UL_MMDC_ADDR = 0x80000000, - FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX6UL_MMDC_SIZE = (2 * GiB), FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, - FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, - FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, - FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, - FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_MEM_SIZE = (256 * MiB), - /* AIPS-2 */ + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_ALIAS_SIZE = (128 * MiB), + + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_EIM_CS_SIZE = (128 * MiB), + + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_AES_ENCRYPT_SIZE = (1 * MiB), + + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_RX_SIZE = (32 * MiB), + + /* AIPS-2 Begin */ FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, FSL_IMX6UL_UART4_ADDR = 0x021F0000, FSL_IMX6UL_UART3_ADDR = 0x021EC000, FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_QSPI_SIZE = 0x500, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CTRL_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_CMP_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_SYS_CNT_RD_SIZE = (16 * KiB), + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_TZASC_SIZE = (16 * KiB), + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_PXP_SIZE = (16 * KiB), + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSI_SIZE = 0x100, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_CSU_SIZE = (16 * KiB), + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_OCOTP_CTRL_SIZE = (4 * KiB), + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_EIM_SIZE = 0x100, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_MMDC_CFG_SIZE = (4 * KiB), + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_ROMCP_SIZE = 0x300, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, FSL_IMX6UL_I2C2_ADDR = 0x021A4000, FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_ADCn_SIZE = 0x100, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, FSL_IMX6UL_USDHC1_ADDR = 0x02190000, - FSL_IMX6UL_SIM1_ADDR = 0x0218C000, - FSL_IMX6UL_ENET1_ADDR = 0x02188000, - FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, - FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, - FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, - FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, - FSL_IMX6UL_CAAM_ADDR = 0x02140000, - FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, - /* AIPS-1 */ + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_SIMn_SIZE = (16 * KiB), + + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB1_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_USB2_ADDR = 0x02184200, + + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_USBO2_PL301_SIZE = (16 * KiB), + + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_AIPS2_CFG_SIZE = 0x100, + + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_CAAM_SIZE = (16 * KiB), + + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + FSL_IMX6UL_A7MPCORE_DAP_SIZE = (4 * KiB), + /* AIPS-2 End */ + + /* AIPS-1 Begin */ FSL_IMX6UL_PWM8_ADDR = 0x020FC000, FSL_IMX6UL_PWM7_ADDR = 0x020F8000, FSL_IMX6UL_PWM6_ADDR = 0x020F4000, FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_SDMA_SIZE = 0x300, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_GPR_SIZE = 0x40, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_IOMUXC_SIZE = 0x700, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_USBPHY2_ADDR = 0x020CA000, - FSL_IMX6UL_USBPHY2_SIZE = (4 * 1024), FSL_IMX6UL_USBPHY1_ADDR = 0x020C9000, - FSL_IMX6UL_USBPHY1_SIZE = (4 * 1024), + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_ANALOG_SIZE = 0x300, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_KPP_SIZE = 0x10, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_SNVS_LP_SIZE = (16 * KiB), + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_CANn_SIZE = (4 * KiB), + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, FSL_IMX6UL_PWM3_ADDR = 0x02088000, FSL_IMX6UL_PWM2_ADDR = 0x02084000, FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_PWMn_SIZE = 0x20, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_AIPS1_CFG_SIZE = (16 * KiB), + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_BEE_SIZE = (16 * KiB), + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_TOUCH_CTRL_SIZE = 0x100, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_SPBA_SIZE = 0x100, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_ASRC_SIZE = 0x100, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, FSL_IMX6UL_SAI2_ADDR = 0x0202C000, FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_SAIn_SIZE = 0x200, + FSL_IMX6UL_UART8_ADDR = 0x02024000, FSL_IMX6UL_UART1_ADDR = 0x02020000, FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + FSL_IMX6UL_SPDIF_SIZE = 0x100, + /* AIPS-1 End */ + + FSL_IMX6UL_BCH_ADDR = 0x01808000, + FSL_IMX6UL_BCH_SIZE = 0x200, + + FSL_IMX6UL_GPMI_ADDR = 0x01806000, + FSL_IMX6UL_GPMI_SIZE = 0x200, FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, - FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + FSL_IMX6UL_APBH_DMA_SIZE = (4 * KiB), FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, - FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = (384 * KiB), + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, - FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_OCRAM_MEM_SIZE = (128 * KiB), + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, - FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_CAAM_MEM_SIZE = (32 * KiB), + FSL_IMX6UL_ROM_ADDR = 0x00000000, - FSL_IMX6UL_ROM_SIZE = 0x00018000, + FSL_IMX6UL_ROM_SIZE = (96 * KiB), }; enum FslIMX6ULIRQs { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * GPIOs 1 to 5 + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { snprintf(name, NAME_SIZE, "epit%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * eCSPI + * eCSPIs */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { snprintf(name, NAME_SIZE, "usbphy%d", i); object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); } + + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX6UL_A7MPCORE_DAP_SIZE); /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * GPIO + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * IOMUXC and IOMUXC_GPR + * IOMUXC */ - for (i = 0; i < 1; i++) { - static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { - FSL_IMX6UL_IOMUXC_ADDR, - FSL_IMX6UL_IOMUXC_GPR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); - } + create_unimplemented_device("iomuxc", FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_gpr", FSL_IMX6UL_IOMUXC_GPR_ADDR, + FSL_IMX6UL_IOMUXC_GPR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { FSL_IMX6UL_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENETn_TIMER_IRQ[i])); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { + static const hwaddr + FSL_IMX6UL_USB_PHYn_ADDR[FSL_IMX6UL_NUM_USB_PHYS] = { + FSL_IMX6UL_USBPHY1_ADDR, + FSL_IMX6UL_USBPHY2_ADDR, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, - FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000); + FSL_IMX6UL_USB_PHYn_ADDR[i]); } + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { + static const hwaddr FSL_IMX6UL_USB02_USBn_ADDR[FSL_IMX6UL_NUM_USBS] = { + FSL_IMX6UL_USBO2_USB1_ADDR, + FSL_IMX6UL_USBO2_USB2_ADDR, + }; + static const int FSL_IMX6UL_USBn_IRQ[] = { FSL_IMX6UL_USB1_IRQ, FSL_IMX6UL_USB2_IRQ, }; + sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, - FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200); + FSL_IMX6UL_USB02_USBn_ADDR[i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX6UL_USBn_IRQ[i])); } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { FSL_IMX6UL_WDOG1_IRQ, FSL_IMX6UL_WDOG2_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * SDMA */ - create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, + FSL_IMX6UL_SDMA_SIZE); /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000); - create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000); - create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_SAIS; i++) { + static const hwaddr FSL_IMX6UL_SAIn_ADDR[FSL_IMX6UL_NUM_SAIS] = { + FSL_IMX6UL_SAI1_ADDR, + FSL_IMX6UL_SAI2_ADDR, + FSL_IMX6UL_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX6UL_SAIn_ADDR[i], + FSL_IMX6UL_SAIn_SIZE); + } /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000); - create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000); - create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000); - create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_PWMS; i++) { + static const hwaddr FSL_IMX6UL_PWMn_ADDR[FSL_IMX6UL_NUM_PWMS] = { + FSL_IMX6UL_PWM1_ADDR, + FSL_IMX6UL_PWM2_ADDR, + FSL_IMX6UL_PWM3_ADDR, + FSL_IMX6UL_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX6UL_PWMn_ADDR[i], + FSL_IMX6UL_PWMn_SIZE); + } /* * Audio ASRC (asynchronous sample rate converter) */ - create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000); + create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, + FSL_IMX6UL_ASRC_SIZE); /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000); - create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_CANS; i++) { + static const hwaddr FSL_IMX6UL_CANn_ADDR[FSL_IMX6UL_NUM_CANS] = { + FSL_IMX6UL_CAN1_ADDR, + FSL_IMX6UL_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX6UL_CANn_ADDR[i], + FSL_IMX6UL_CANn_SIZE); + } /* * APHB_DMA @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) }; snprintf(name, NAME_SIZE, "adc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], + FSL_IMX6UL_ADCn_SIZE); } /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, + FSL_IMX6UL_LCDIF_SIZE); /* * ROM memory -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add 4 missing PWM devices Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 59e4dc56e14eccfefd379275ec19048dff9c10b3.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 +- hw/arm/fsl-imx6ul.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_USBS = 2, FSL_IMX6UL_NUM_SAIS = 3, FSL_IMX6UL_NUM_CANS = 2, - FSL_IMX6UL_NUM_PWMS = 4, + FSL_IMX6UL_NUM_PWMS = 8, }; struct FslIMX6ULState { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_PWM2_ADDR, FSL_IMX6UL_PWM3_ADDR, FSL_IMX6UL_PWM4_ADDR, + FSL_IMX6UL_PWM5_ADDR, + FSL_IMX6UL_PWM6_ADDR, + FSL_IMX6UL_PWM7_ADDR, + FSL_IMX6UL_PWM8_ADDR, }; snprintf(name, NAME_SIZE, "pwm%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, FSL_IMX6UL_LCDIF_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX6UL_CSU_ADDR, + FSL_IMX6UL_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX6UL_TZASC_ADDR, + FSL_IMX6UL_TZASC_SIZE); + /* * ROM memory */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for all i.MX7 devices in i.MX7 header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 59e195d33e4d486a8d131392acd46633c8c10ed7.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 330 ++++++++++++++++++++++++++++---------- hw/arm/fsl-imx7.c | 130 ++++++++++----- 2 files changed, 335 insertions(+), 125 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" -#include "hw/misc/imx6_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ #include "hw/usb/chipidea.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX7 "fsl-imx7" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX7State, FSL_IMX7) @@ -XXX,XX +XXX,XX @@ enum FslIMX7Configuration { FSL_IMX7_NUM_ECSPIS = 4, FSL_IMX7_NUM_USBS = 3, FSL_IMX7_NUM_ADCS = 2, + FSL_IMX7_NUM_SAIS = 3, + FSL_IMX7_NUM_CANS = 2, + FSL_IMX7_NUM_PWMS = 4, }; struct FslIMX7State { @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { enum FslIMX7MemoryMap { FSL_IMX7_MMDC_ADDR = 0x80000000, - FSL_IMX7_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX7_MMDC_SIZE = (2 * GiB), - FSL_IMX7_GPIO1_ADDR = 0x30200000, - FSL_IMX7_GPIO2_ADDR = 0x30210000, - FSL_IMX7_GPIO3_ADDR = 0x30220000, - FSL_IMX7_GPIO4_ADDR = 0x30230000, - FSL_IMX7_GPIO5_ADDR = 0x30240000, - FSL_IMX7_GPIO6_ADDR = 0x30250000, - FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX7_QSPI1_MEM_SIZE = (256 * MiB), - FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + FSL_IMX7_PCIE1_MEM_ADDR = 0x40000000, + FSL_IMX7_PCIE1_MEM_SIZE = (256 * MiB), - FSL_IMX7_WDOG1_ADDR = 0x30280000, - FSL_IMX7_WDOG2_ADDR = 0x30290000, - FSL_IMX7_WDOG3_ADDR = 0x302A0000, - FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_QSPI1_RX_BUF_ADDR = 0x34000000, + FSL_IMX7_QSPI1_RX_BUF_SIZE = (32 * MiB), - FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + /* PCIe Peripherals */ + FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_GPT1_ADDR = 0x302D0000, - FSL_IMX7_GPT2_ADDR = 0x302E0000, - FSL_IMX7_GPT3_ADDR = 0x302F0000, - FSL_IMX7_GPT4_ADDR = 0x30300000, + /* MMAP Peripherals */ + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x8000, - FSL_IMX7_IOMUXC_ADDR = 0x30330000, - FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, - FSL_IMX7_IOMUXCn_SIZE = 0x1000, + /* GPV configuration */ + FSL_IMX7_GPV6_ADDR = 0x32600000, + FSL_IMX7_GPV5_ADDR = 0x32500000, + FSL_IMX7_GPV4_ADDR = 0x32400000, + FSL_IMX7_GPV3_ADDR = 0x32300000, + FSL_IMX7_GPV2_ADDR = 0x32200000, + FSL_IMX7_GPV1_ADDR = 0x32100000, + FSL_IMX7_GPV0_ADDR = 0x32000000, + FSL_IMX7_GPVn_SIZE = (1 * MiB), - FSL_IMX7_OCOTP_ADDR = 0x30350000, - FSL_IMX7_OCOTP_SIZE = 0x10000, + /* Arm Peripherals */ + FSL_IMX7_A7MPCORE_ADDR = 0x31000000, - FSL_IMX7_ANALOG_ADDR = 0x30360000, - FSL_IMX7_SNVS_ADDR = 0x30370000, - FSL_IMX7_CCM_ADDR = 0x30380000, + /* AIPS-3 Begin */ - FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = 0x1000, + FSL_IMX7_ENET2_ADDR = 0x30BF0000, + FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ADC1_ADDR = 0x30610000, - FSL_IMX7_ADC2_ADDR = 0x30620000, - FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_SDMA_ADDR = 0x30BD0000, + FSL_IMX7_SDMA_SIZE = (4 * KiB), - FSL_IMX7_PWM1_ADDR = 0x30660000, - FSL_IMX7_PWM2_ADDR = 0x30670000, - FSL_IMX7_PWM3_ADDR = 0x30680000, - FSL_IMX7_PWM4_ADDR = 0x30690000, - FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_EIM_ADDR = 0x30BC0000, + FSL_IMX7_EIM_SIZE = (4 * KiB), - FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, - FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_QSPI_ADDR = 0x30BB0000, + FSL_IMX7_QSPI_SIZE = 0x8000, - FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_SIM2_ADDR = 0x30BA0000, + FSL_IMX7_SIM1_ADDR = 0x30B90000, + FSL_IMX7_SIMn_SIZE = (4 * KiB), + + FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_USDHC2_ADDR = 0x30B50000, + FSL_IMX7_USDHC1_ADDR = 0x30B40000, + + FSL_IMX7_USB3_ADDR = 0x30B30000, + FSL_IMX7_USBMISC3_ADDR = 0x30B30200, + FSL_IMX7_USB2_ADDR = 0x30B20000, + FSL_IMX7_USBMISC2_ADDR = 0x30B20200, + FSL_IMX7_USB1_ADDR = 0x30B10000, + FSL_IMX7_USBMISC1_ADDR = 0x30B10200, + FSL_IMX7_USBMISCn_SIZE = 0x200, + + FSL_IMX7_USB_PL301_ADDR = 0x30AD0000, + FSL_IMX7_USB_PL301_SIZE = (64 * KiB), + + FSL_IMX7_SEMAPHORE_HS_ADDR = 0x30AC0000, + FSL_IMX7_SEMAPHORE_HS_SIZE = (64 * KiB), + + FSL_IMX7_MUB_ADDR = 0x30AB0000, + FSL_IMX7_MUA_ADDR = 0x30AA0000, + FSL_IMX7_MUn_SIZE = (KiB), + + FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART6_ADDR = 0x30A80000, + FSL_IMX7_UART5_ADDR = 0x30A70000, + FSL_IMX7_UART4_ADDR = 0x30A60000, + + FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_I2C3_ADDR = 0x30A40000, + FSL_IMX7_I2C2_ADDR = 0x30A30000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, + + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CANn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS3_CONF_ADDR = 0x309F0000, + FSL_IMX7_AIPS3_CONF_SIZE = (64 * KiB), FSL_IMX7_CAAM_ADDR = 0x30900000, - FSL_IMX7_CAAM_SIZE = 0x40000, + FSL_IMX7_CAAM_SIZE = (256 * KiB), - FSL_IMX7_CAN1_ADDR = 0x30A00000, - FSL_IMX7_CAN2_ADDR = 0x30A10000, - FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_SPBA_ADDR = 0x308F0000, + FSL_IMX7_SPBA_SIZE = (4 * KiB), - FSL_IMX7_I2C1_ADDR = 0x30A20000, - FSL_IMX7_I2C2_ADDR = 0x30A30000, - FSL_IMX7_I2C3_ADDR = 0x30A40000, - FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_SAI3_ADDR = 0x308C0000, + FSL_IMX7_SAI2_ADDR = 0x308B0000, + FSL_IMX7_SAI1_ADDR = 0x308A0000, + FSL_IMX7_SAIn_SIZE = (4 * KiB), - FSL_IMX7_ECSPI1_ADDR = 0x30820000, - FSL_IMX7_ECSPI2_ADDR = 0x30830000, - FSL_IMX7_ECSPI3_ADDR = 0x30840000, - FSL_IMX7_ECSPI4_ADDR = 0x30630000, - - FSL_IMX7_LCDIF_ADDR = 0x30730000, - FSL_IMX7_LCDIF_SIZE = 0x1000, - - FSL_IMX7_UART1_ADDR = 0x30860000, + FSL_IMX7_UART3_ADDR = 0x30880000, /* * Some versions of the reference manual claim that UART2 is @ * 0x30870000, but experiments with HW + DT files in upstream @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { * actually located @ 0x30890000 */ FSL_IMX7_UART2_ADDR = 0x30890000, - FSL_IMX7_UART3_ADDR = 0x30880000, - FSL_IMX7_UART4_ADDR = 0x30A60000, - FSL_IMX7_UART5_ADDR = 0x30A70000, - FSL_IMX7_UART6_ADDR = 0x30A80000, - FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART1_ADDR = 0x30860000, - FSL_IMX7_SAI1_ADDR = 0x308A0000, - FSL_IMX7_SAI2_ADDR = 0x308B0000, - FSL_IMX7_SAI3_ADDR = 0x308C0000, - FSL_IMX7_SAIn_SIZE = 0x10000, + FSL_IMX7_ECSPI3_ADDR = 0x30840000, + FSL_IMX7_ECSPI2_ADDR = 0x30830000, + FSL_IMX7_ECSPI1_ADDR = 0x30820000, + FSL_IMX7_ECSPIn_SIZE = (4 * KiB), - FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ENET2_ADDR = 0x30BF0000, + /* AIPS-3 End */ - FSL_IMX7_USB1_ADDR = 0x30B10000, - FSL_IMX7_USBMISC1_ADDR = 0x30B10200, - FSL_IMX7_USB2_ADDR = 0x30B20000, - FSL_IMX7_USBMISC2_ADDR = 0x30B20200, - FSL_IMX7_USB3_ADDR = 0x30B30000, - FSL_IMX7_USBMISC3_ADDR = 0x30B30200, - FSL_IMX7_USBMISCn_SIZE = 0x200, + /* AIPS-2 Begin */ - FSL_IMX7_USDHC1_ADDR = 0x30B40000, - FSL_IMX7_USDHC2_ADDR = 0x30B50000, - FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_AXI_DEBUG_MON_ADDR = 0x307E0000, + FSL_IMX7_AXI_DEBUG_MON_SIZE = (64 * KiB), - FSL_IMX7_SDMA_ADDR = 0x30BD0000, - FSL_IMX7_SDMA_SIZE = 0x1000, + FSL_IMX7_PERFMON2_ADDR = 0x307D0000, + FSL_IMX7_PERFMON1_ADDR = 0x307C0000, + FSL_IMX7_PERFMONn_SIZE = (64 * KiB), + + FSL_IMX7_DDRC_ADDR = 0x307A0000, + FSL_IMX7_DDRC_SIZE = (4 * KiB), + + FSL_IMX7_DDRC_PHY_ADDR = 0x30790000, + FSL_IMX7_DDRC_PHY_SIZE = (4 * KiB), + + FSL_IMX7_TZASC_ADDR = 0x30780000, + FSL_IMX7_TZASC_SIZE = (64 * KiB), + + FSL_IMX7_MIPI_DSI_ADDR = 0x30760000, + FSL_IMX7_MIPI_DSI_SIZE = (4 * KiB), + + FSL_IMX7_MIPI_CSI_ADDR = 0x30750000, + FSL_IMX7_MIPI_CSI_SIZE = 0x4000, + + FSL_IMX7_LCDIF_ADDR = 0x30730000, + FSL_IMX7_LCDIF_SIZE = 0x8000, + + FSL_IMX7_CSI_ADDR = 0x30710000, + FSL_IMX7_CSI_SIZE = (4 * KiB), + + FSL_IMX7_PXP_ADDR = 0x30700000, + FSL_IMX7_PXP_SIZE = 0x4000, + + FSL_IMX7_EPDC_ADDR = 0x306F0000, + FSL_IMX7_EPDC_SIZE = (4 * KiB), + + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = (4 * KiB), + + FSL_IMX7_SYSCNT_CTRL_ADDR = 0x306C0000, + FSL_IMX7_SYSCNT_CMP_ADDR = 0x306B0000, + FSL_IMX7_SYSCNT_RD_ADDR = 0x306A0000, + + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWMn_SIZE = (4 * KiB), + + FSL_IMX7_FlEXTIMER2_ADDR = 0x30650000, + FSL_IMX7_FlEXTIMER1_ADDR = 0x30640000, + FSL_IMX7_FLEXTIMERn_SIZE = (4 * KiB), + + FSL_IMX7_ECSPI4_ADDR = 0x30630000, + + FSL_IMX7_ADC2_ADDR = 0x30620000, + FSL_IMX7_ADC1_ADDR = 0x30610000, + FSL_IMX7_ADCn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS2_CONF_ADDR = 0x305F0000, + FSL_IMX7_AIPS2_CONF_SIZE = (64 * KiB), + + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + + FSL_IMX7_CSU_ADDR = 0x303E0000, + FSL_IMX7_CSU_SIZE = (64 * KiB), + + FSL_IMX7_RDC_ADDR = 0x303D0000, + FSL_IMX7_RDC_SIZE = (4 * KiB), + + FSL_IMX7_SEMAPHORE2_ADDR = 0x303C0000, + FSL_IMX7_SEMAPHORE1_ADDR = 0x303B0000, + FSL_IMX7_SEMAPHOREn_SIZE = (4 * KiB), + + FSL_IMX7_GPC_ADDR = 0x303A0000, + + FSL_IMX7_SRC_ADDR = 0x30390000, + FSL_IMX7_SRC_SIZE = (4 * KiB), + + FSL_IMX7_CCM_ADDR = 0x30380000, + + FSL_IMX7_SNVS_HP_ADDR = 0x30370000, + + FSL_IMX7_ANALOG_ADDR = 0x30360000, + + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + + FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, + FSL_IMX7_IOMUXC_GPR_SIZE = (4 * KiB), + + FSL_IMX7_IOMUXC_ADDR = 0x30330000, + FSL_IMX7_IOMUXC_SIZE = (4 * KiB), + + FSL_IMX7_KPP_ADDR = 0x30320000, + FSL_IMX7_KPP_SIZE = (4 * KiB), + + FSL_IMX7_ROMCP_ADDR = 0x30310000, + FSL_IMX7_ROMCP_SIZE = (4 * KiB), + + FSL_IMX7_GPT4_ADDR = 0x30300000, + FSL_IMX7_GPT3_ADDR = 0x302F0000, + FSL_IMX7_GPT2_ADDR = 0x302E0000, + FSL_IMX7_GPT1_ADDR = 0x302D0000, + + FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + FSL_IMX7_IOMUXC_LPSR_SIZE = (4 * KiB), + + FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_WDOG3_ADDR = 0x302A0000, + FSL_IMX7_WDOG2_ADDR = 0x30290000, + FSL_IMX7_WDOG1_ADDR = 0x30280000, + + FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + + FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_GPIO6_ADDR = 0x30250000, + FSL_IMX7_GPIO5_ADDR = 0x30240000, + FSL_IMX7_GPIO4_ADDR = 0x30230000, + FSL_IMX7_GPIO3_ADDR = 0x30220000, + FSL_IMX7_GPIO2_ADDR = 0x30210000, + FSL_IMX7_GPIO1_ADDR = 0x30200000, + + FSL_IMX7_AIPS1_CONF_ADDR = 0x301F0000, + FSL_IMX7_AIPS1_CONF_SIZE = (64 * KiB), - FSL_IMX7_A7MPCORE_ADDR = 0x31000000, FSL_IMX7_A7MPCORE_DAP_ADDR = 0x30000000, + FSL_IMX7_A7MPCORE_DAP_SIZE = (1 * MiB), - FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, + /* AIPS-1 End */ - FSL_IMX7_GPR_ADDR = 0x30340000, + FSL_IMX7_EIM_CS0_ADDR = 0x28000000, + FSL_IMX7_EIM_CS0_SIZE = (128 * MiB), - FSL_IMX7_DMA_APBH_ADDR = 0x33000000, - FSL_IMX7_DMA_APBH_SIZE = 0x2000, + FSL_IMX7_OCRAM_PXP_ADDR = 0x00940000, + FSL_IMX7_OCRAM_PXP_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_EPDC_ADDR = 0x00920000, + FSL_IMX7_OCRAM_EPDC_SIZE = (128 * KiB), + + FSL_IMX7_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX7_OCRAM_MEM_SIZE = (128 * KiB), + + FSL_IMX7_TCMU_ADDR = 0x00800000, + FSL_IMX7_TCMU_SIZE = (32 * KiB), + + FSL_IMX7_TCML_ADDR = 0x007F8000, + FSL_IMX7_TCML_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_S_ADDR = 0x00180000, + FSL_IMX7_OCRAM_S_SIZE = (32 * KiB), + + FSL_IMX7_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX7_CAAM_MEM_SIZE = (32 * KiB), + + FSL_IMX7_ROM_ADDR = 0x00000000, + FSL_IMX7_ROM_SIZE = (96 * KiB), }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) char name[NAME_SIZE]; int i; + /* + * CPUs + */ for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX7_NUM_CPUS); i++) { snprintf(name, NAME_SIZE, "cpu%d", i); object_initialize_child(obj, name, &s->cpu[i], @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) TYPE_A15MPCORE_PRIV); /* - * GPIOs 1 to 7 + * GPIOs */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } - + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); + /* + * PCIE + */ object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) return; } + /* + * CPUs + */ for (i = 0; i < smp_cpus; i++) { o = OBJECT(&s->cpu[i]); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX7_A7MPCORE_DAP_SIZE); /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPTn_IRQ[i])); } + /* + * GPIOs + */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = { FSL_IMX7_GPIO1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * IOMUXC and IOMUXC_LPSR */ - for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) { - static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = { - FSL_IMX7_IOMUXC_ADDR, - FSL_IMX7_IOMUXC_LPSR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i], - FSL_IMX7_IOMUXCn_SIZE); - } + create_unimplemented_device("iomuxc", FSL_IMX7_IOMUXC_ADDR, + FSL_IMX7_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_lspr", FSL_IMX7_IOMUXC_LPSR_ADDR, + FSL_IMX7_IOMUXC_LPSR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = { FSL_IMX7_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_SPIn_IRQ[i])); } + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = { FSL_IMX7_I2C1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * SNVS */ sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_HP_ADDR); /* * SRC @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_PWMS; i++) { + static const hwaddr FSL_IMX7_PWMn_ADDR[FSL_IMX7_NUM_PWMS] = { + FSL_IMX7_PWM1_ADDR, + FSL_IMX7_PWM2_ADDR, + FSL_IMX7_PWM3_ADDR, + FSL_IMX7_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX7_PWMn_ADDR[i], + FSL_IMX7_PWMn_SIZE); + } /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); - create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_CANS; i++) { + static const hwaddr FSL_IMX7_CANn_ADDR[FSL_IMX7_NUM_CANS] = { + FSL_IMX7_CAN1_ADDR, + FSL_IMX7_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX7_CANn_ADDR[i], + FSL_IMX7_CANn_SIZE); + } /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX7_SAI1_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI2_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI3_ADDR, FSL_IMX7_SAIn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_SAIS; i++) { + static const hwaddr FSL_IMX7_SAIn_ADDR[FSL_IMX7_NUM_SAIS] = { + FSL_IMX7_SAI1_ADDR, + FSL_IMX7_SAI2_ADDR, + FSL_IMX7_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX7_SAIn_ADDR[i], + FSL_IMX7_SAIn_SIZE); + } /* * OCOTP @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, FSL_IMX7_OCOTP_SIZE); + /* + * GPR + */ sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_IOMUXC_GPR_ADDR); + /* + * PCIE + */ sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ); sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq); - + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = { FSL_IMX7_USBMISC1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add various memory segments - OCRAM - OCRAM EPDC - OCRAM PXP - OCRAM S - ROM - CAAM Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: f887a3483996ba06d40bd62ffdfb0ecf68621987.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 7 +++++ hw/arm/fsl-imx7.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7GPRState gpr; ChipideaState usb[FSL_IMX7_NUM_USBS]; DesignwarePCIEHost pcie; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_epdc; + MemoryRegion ocram_pxp; + MemoryRegion ocram_s; + uint32_t phy_num[FSL_IMX7_NUM_ETHS]; bool phy_connected[FSL_IMX7_NUM_ETHS]; }; diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX7_CSU_ADDR, + FSL_IMX7_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX7_TZASC_ADDR, + FSL_IMX7_TZASC_SIZE); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx7.ocram", + FSL_IMX7_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * OCRAM EPDC memory + */ + memory_region_init_ram(&s->ocram_epdc, NULL, "imx7.ocram_epdc", + FSL_IMX7_OCRAM_EPDC_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_EPDC_ADDR, + &s->ocram_epdc); + + /* + * OCRAM PXP memory + */ + memory_region_init_ram(&s->ocram_pxp, NULL, "imx7.ocram_pxp", + FSL_IMX7_OCRAM_PXP_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_PXP_ADDR, + &s->ocram_pxp); + + /* + * OCRAM_S memory + */ + memory_region_init_ram(&s->ocram_s, NULL, "imx7.ocram_s", + FSL_IMX7_OCRAM_S_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_S_ADDR, + &s->ocram_s); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, OBJECT(dev), "imx7.rom", + FSL_IMX7_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, OBJECT(dev), "imx7.caam", + FSL_IMX7_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_CAAM_MEM_ADDR, + &s->caam); } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The SRC device is normally used to start the secondary CPU. When running Linux directly, QEMU is emulating a PSCI interface that UBOOT is installing at boot time and therefore the fact that the SRC device is unimplemented is hidden as Qemu respond directly to PSCI requets without using the SRC device. But if you try to run a more bare metal application (maybe uboot itself), then it is not possible to start the secondary CPU as the SRC is an unimplemented device. This patch adds the ability to start the secondary CPU through the SRC device so that you can use this feature in bare metal applications. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +- include/hw/misc/imx7_src.h | 66 +++++++++ hw/arm/fsl-imx7.c | 8 +- hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 6 files changed, 356 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" +#include "hw/misc/imx7_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7CCMState ccm; IMX7AnalogState analog; IMX7SNVSState snvs; + IMX7SRCState src; IMXGPCv2State gpcv2; IMXSPIState spi[FSL_IMX7_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX7_NUM_I2CS]; @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = (4 * KiB), FSL_IMX7_CCM_ADDR = 0x30380000, diff --git a/include/hw/misc/imx7_src.h b/include/hw/misc/imx7_src.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_src.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (C) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SRC_H +#define IMX7_SRC_H + +#include "hw/sysbus.h" +#include "qemu/bitops.h" +#include "qom/object.h" + +#define SRC_SCR 0 +#define SRC_A7RCR0 1 +#define SRC_A7RCR1 2 +#define SRC_M4RCR 3 +#define SRC_ERCR 5 +#define SRC_HSICPHY_RCR 7 +#define SRC_USBOPHY1_RCR 8 +#define SRC_USBOPHY2_RCR 9 +#define SRC_MPIPHY_RCR 10 +#define SRC_PCIEPHY_RCR 11 +#define SRC_SBMR1 22 +#define SRC_SRSR 23 +#define SRC_SISR 26 +#define SRC_SIMR 27 +#define SRC_SBMR2 28 +#define SRC_GPR1 29 +#define SRC_GPR2 30 +#define SRC_GPR3 31 +#define SRC_GPR4 32 +#define SRC_GPR5 33 +#define SRC_GPR6 34 +#define SRC_GPR7 35 +#define SRC_GPR8 36 +#define SRC_GPR9 37 +#define SRC_GPR10 38 +#define SRC_MAX 39 + +/* SRC_A7SCR1 */ +#define R_CORE1_ENABLE_SHIFT 1 +#define R_CORE1_ENABLE_LENGTH 1 +/* SRC_A7SCR0 */ +#define R_CORE1_RST_SHIFT 5 +#define R_CORE1_RST_LENGTH 1 +#define R_CORE0_RST_SHIFT 4 +#define R_CORE0_RST_LENGTH 1 + +#define TYPE_IMX7_SRC "imx7.src" +OBJECT_DECLARE_SIMPLE_TYPE(IMX7SRCState, IMX7_SRC) + +struct IMX7SRCState { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t regs[SRC_MAX]; +}; + +#endif /* IMX7_SRC_H */ diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * SRC + */ + object_initialize_child(obj, "src", &s->src, TYPE_IMX7_SRC); + /* * ECSPIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * SRC */ - create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX7_SRC_ADDR); /* * Watchdogs diff --git a/hw/misc/imx7_src.c b/hw/misc/imx7_src.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_src.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_src.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" +#include "qemu/module.h" +#include "target/arm/arm-powerctl.h" +#include "hw/core/cpu.h" +#include "hw/registerfields.h" + +#include "trace.h" + +static const char *imx7_src_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case SRC_SCR: + return "SRC_SCR"; + case SRC_A7RCR0: + return "SRC_A7RCR0"; + case SRC_A7RCR1: + return "SRC_A7RCR1"; + case SRC_M4RCR: + return "SRC_M4RCR"; + case SRC_ERCR: + return "SRC_ERCR"; + case SRC_HSICPHY_RCR: + return "SRC_HSICPHY_RCR"; + case SRC_USBOPHY1_RCR: + return "SRC_USBOPHY1_RCR"; + case SRC_USBOPHY2_RCR: + return "SRC_USBOPHY2_RCR"; + case SRC_PCIEPHY_RCR: + return "SRC_PCIEPHY_RCR"; + case SRC_SBMR1: + return "SRC_SBMR1"; + case SRC_SRSR: + return "SRC_SRSR"; + case SRC_SISR: + return "SRC_SISR"; + case SRC_SIMR: + return "SRC_SIMR"; + case SRC_SBMR2: + return "SRC_SBMR2"; + case SRC_GPR1: + return "SRC_GPR1"; + case SRC_GPR2: + return "SRC_GPR2"; + case SRC_GPR3: + return "SRC_GPR3"; + case SRC_GPR4: + return "SRC_GPR4"; + case SRC_GPR5: + return "SRC_GPR5"; + case SRC_GPR6: + return "SRC_GPR6"; + case SRC_GPR7: + return "SRC_GPR7"; + case SRC_GPR8: + return "SRC_GPR8"; + case SRC_GPR9: + return "SRC_GPR9"; + case SRC_GPR10: + return "SRC_GPR10"; + default: + sprintf(unknown, "%u ?", reg); + return unknown; + } +} + +static const VMStateDescription vmstate_imx7_src = { + .name = TYPE_IMX7_SRC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_src_reset(DeviceState *dev) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + /* Set reset values */ + s->regs[SRC_SCR] = 0xA0; + s->regs[SRC_SRSR] = 0x1; + s->regs[SRC_SIMR] = 0x1F; +} + +static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + + if (index < SRC_MAX) { + value = s->regs[index]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + } + + trace_imx7_src_read(imx7_src_reg_name(index), value); + + return value; +} + + +/* + * The reset is asynchronous so we need to defer clearing the reset + * bit until the work is completed. + */ + +struct SRCSCRResetInfo { + IMX7SRCState *s; + uint32_t reset_bit; +}; + +static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) +{ + struct SRCSCRResetInfo *ri = data.host_ptr; + IMX7SRCState *s = ri->s; + + assert(qemu_mutex_iothread_locked()); + + s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + g_free(ri); +} + +static void imx7_defer_clear_reset_bit(uint32_t cpuid, + IMX7SRCState *s, + uint32_t reset_shift) +{ + struct SRCSCRResetInfo *ri; + CPUState *cpu = arm_get_cpu_by_id(cpuid); + + if (!cpu) { + return; + } + + ri = g_new(struct SRCSCRResetInfo, 1); + ri->s = s; + ri->reset_bit = reset_shift; + + async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); +} + + +static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + long unsigned int change_mask; + uint32_t current_value = value; + + if (index >= SRC_MAX) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + return; + } + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + change_mask = s->regs[index] ^ (uint32_t)current_value; + + switch (index) { + case SRC_A7RCR0: + if (FIELD_EX32(change_mask, CORE0, RST)) { + arm_reset_cpu(0); + imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); + } + if (FIELD_EX32(change_mask, CORE1, RST)) { + arm_reset_cpu(1); + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + } + s->regs[index] = current_value; + break; + case SRC_A7RCR1: + /* + * On real hardware when the system reset controller starts a + * secondary CPU it runs through some boot ROM code which reads + * the SRC_GPRX registers controlling the start address and branches + * to it. + * Here we are taking a short cut and branching directly to the + * requested address (we don't want to run the boot ROM code inside + * QEMU) + */ + if (FIELD_EX32(change_mask, CORE1, ENABLE)) { + if (FIELD_EX32(current_value, CORE1, ENABLE)) { + /* CORE 1 is brought up */ + arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], + 3, false); + } else { + /* CORE 1 is shut down */ + arm_set_cpu_off(1); + } + /* We clear the reset bits as the processor changed state */ + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + clear_bit(R_CORE1_RST_SHIFT, &change_mask); + } + s->regs[index] = current_value; + break; + default: + s->regs[index] = current_value; + break; + } +} + +static const struct MemoryRegionOps imx7_src_ops = { + .read = imx7_src_read, + .write = imx7_src_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_src_realize(DeviceState *dev, Error **errp) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, + TYPE_IMX7_SRC, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); +} + +static void imx7_src_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx7_src_realize; + dc->reset = imx7_src_reset; + dc->vmsd = &vmstate_imx7_src; + dc->desc = "i.MX6 System Reset Controller"; +} + +static const TypeInfo imx7_src_info = { + .name = TYPE_IMX7_SRC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SRCState), + .class_init = imx7_src_class_init, +}; + +static void imx7_src_register_types(void) +{ + type_register_static(&imx7_src_info); +} + +type_init(imx7_src_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( 'imx6_src.c', 'imx6ul_ccm.c', 'imx7_ccm.c', + 'imx7_src.c', 'imx7_gpr.c', 'imx7_snvs.c', 'imx_ccm.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d" ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +# imx7_src.c +imx7_src_read(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +imx7_src_write(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 + # iotkit-sysinfo.c iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.34.1 The architecture requires (R_TYTWB) that an attempt to return from EL3 when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This enforces that the CPU can't ever be executing below EL3 with the NSE,NS bits indicating an invalid security state.) We were missing this check; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230807150618.101357-1-peter.maydell@linaro.org --- target/arm/tcg/helper-a64.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) spsr &= ~PSTATE_SS; } + /* + * FEAT_RME forbids return from EL3 with an invalid security state. + * We don't need an explicit check for FEAT_RME here because we enforce + * in scr_write() that you can't set the NSE bit without it. + */ + if (cur_el == 3 && (env->cp15.scr_el3 & (SCR_NS | SCR_NSE)) == SCR_NSE) { + goto illegal_return; + } + new_el = el_from_spsr(spsr); if (new_el == -1) { goto illegal_return; -- 2.34.1 In the m48t59 device we almost always use 64-bit arithmetic when dealing with time_t deltas. The one exception is in set_alarm(), which currently uses a plain 'int' to hold the difference between two time_t values. Switch to int64_t instead to avoid any possible overflow issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/m48t59.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/rtc/m48t59.c b/hw/rtc/m48t59.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/m48t59.c +++ b/hw/rtc/m48t59.c @@ -XXX,XX +XXX,XX @@ static void alarm_cb (void *opaque) static void set_alarm(M48t59State *NVRAM) { - int diff; + int64_t diff; if (NVRAM->alrm_timer != NULL) { timer_del(NVRAM->alrm_timer); diff = qemu_timedate_diff(&NVRAM->alarm) - NVRAM->time_offset; -- 2.34.1 In the twl92230 device, use int64_t for the two state fields sec_offset and alm_sec, because we set these to values that are either time_t or differences between two time_t values. These fields aren't saved in vmstate anywhere, so we can safely widen them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/twl92230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/rtc/twl92230.c b/hw/rtc/twl92230.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/twl92230.c +++ b/hw/rtc/twl92230.c @@ -XXX,XX +XXX,XX @@ struct MenelausState { struct tm tm; struct tm new; struct tm alm; - int sec_offset; - int alm_sec; + int64_t sec_offset; + int64_t alm_sec; int next_comp; } rtc; uint16_t rtc_next_vmstate; -- 2.34.1 In the aspeed_rtc device we store a difference between two time_t values in an 'int'. This is not really correct when time_t could be 64 bits. Enlarge the field to 'int64_t'. This is a migration compatibility break for the aspeed boards. While we are changing the vmstate, remove the accidental duplicate of the offset field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> --- include/hw/rtc/aspeed_rtc.h | 2 +- hw/rtc/aspeed_rtc.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/hw/rtc/aspeed_rtc.h b/include/hw/rtc/aspeed_rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/rtc/aspeed_rtc.h +++ b/include/hw/rtc/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ struct AspeedRtcState { qemu_irq irq; uint32_t reg[0x18]; - int offset; + int64_t offset; }; diff --git a/hw/rtc/aspeed_rtc.c b/hw/rtc/aspeed_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/aspeed_rtc.c +++ b/hw/rtc/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_rtc_ops = { static const VMStateDescription vmstate_aspeed_rtc = { .name = TYPE_ASPEED_RTC, - .version_id = 1, + .version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), - VMSTATE_INT32(offset, AspeedRtcState), - VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT64(offset, AspeedRtcState), VMSTATE_END_OF_LIST() } }; -- 2.34.1 The functions qemu_get_timedate() and qemu_timedate_diff() take and return a time offset as an integer. Coverity points out that means that when an RTC device implementation holds an offset as a time_t, as the m48t59 does, the time_t will get truncated. (CID 1507157, 1517772). The functions work with time_t internally, so make them use that type in their APIs. Note that this won't help any Y2038 issues where either the device model itself is keeping the offset in a 32-bit integer, or where the hardware under emulation has Y2038 or other rollover problems. If we missed any cases of the former then hopefully Coverity will warn us about them since after this patch we'd be truncating a time_t in assignments from qemu_timedate_diff().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- include/sysemu/rtc.h | 4 ++-- softmmu/rtc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sysemu/rtc.h b/include/sysemu/rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/rtc.h +++ b/include/sysemu/rtc.h @@ -XXX,XX +XXX,XX @@ * The behaviour of the clock whose value this function returns will * depend on the -rtc command line option passed by the user. */ -void qemu_get_timedate(struct tm *tm, int offset); +void qemu_get_timedate(struct tm *tm, time_t offset); /** * qemu_timedate_diff: Return difference between a struct tm and the RTC @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset); * a timestamp one hour further ahead than the current RTC time * then this function will return 3600. */ -int qemu_timedate_diff(struct tm *tm); +time_t qemu_timedate_diff(struct tm *tm); #endif diff --git a/softmmu/rtc.c b/softmmu/rtc.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/rtc.c +++ b/softmmu/rtc.c @@ -XXX,XX +XXX,XX @@ static time_t qemu_ref_timedate(QEMUClockType clock) return value; } -void qemu_get_timedate(struct tm *tm, int offset) +void qemu_get_timedate(struct tm *tm, time_t offset) { time_t ti = qemu_ref_timedate(rtc_clock); @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset) } } -int qemu_timedate_diff(struct tm *tm) +time_t qemu_timedate_diff(struct tm *tm) { time_t seconds; -- 2.34.1 Where architecturally one ARM_FEATURE_X flag implies another ARM_FEATURE_Y, we allow the CPU init function to only set X, and then set Y for it. Currently we do this in two places -- we set a few flags in arm_cpu_post_init() because we need them to decide which properties to create on the CPU object, and then we do the rest in arm_cpu_realizefn(). However, this is fragile, because it's easy to add a new property and not notice that this means that an X-implies-Y check now has to move from realize to post-init. As a specific example, the pmsav7-dregion property is conditional on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and rely on V8-implies-V7, which doesn't happen until the realizefn. Move all of these X-implies-Y checks into a new function, which we call at the top of arm_cpu_post_init(), so the feature bits are available at that point. This does now give us the reverse issue, that if there's a feature bit which is enabled or disabled by the setting of a property then then X-implies-Y features that are dependent on that property need to be in realize, not in this new function. But the only one of those is the "EL3 implies VBAR" which is already in the right place, so putting things this way round seems better to me. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org --- target/arm/cpu.c | 179 +++++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 82 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ unsigned int gt_cntfrq_period_ns(ARMCPU *cpu) NANOSECONDS_PER_SECOND / cpu->gt_cntfrq_hz : 1; } +static void arm_cpu_propagate_feature_implications(ARMCPU *cpu) +{ + CPUARMState *env = &cpu->env; + bool no_aa32 = false; + + /* + * Some features automatically imply others: set the feature + * bits explicitly for these cases. + */ + + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_PMSA); + } + + if (arm_feature(env, ARM_FEATURE_V8)) { + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V7); + } else { + set_feature(env, ARM_FEATURE_V7VE); + } + } + + /* + * There exist AArch64 cpus without AArch32 support. When KVM + * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. + * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. + * As a general principle, we also do not make ID register + * consistency checks anywhere unless using TCG, because only + * for TCG would a consistency-check failure be a QEMU bug. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); + } + + if (arm_feature(env, ARM_FEATURE_V7VE)) { + /* + * v7 Virtualization Extensions. In real hardware this implies + * EL2 and also the presence of the Security Extensions. + * For QEMU, for backwards-compatibility we implement some + * CPUs or CPU configs which have no actual EL2 or EL3 but do + * include the various other features that V7VE implies. + * Presence of EL2 itself is ARM_FEATURE_EL2, and of the + * Security Extensions is ARM_FEATURE_EL3. + */ + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_arm_div, cpu)); + set_feature(env, ARM_FEATURE_LPAE); + set_feature(env, ARM_FEATURE_V7); + } + if (arm_feature(env, ARM_FEATURE_V7)) { + set_feature(env, ARM_FEATURE_VAPA); + set_feature(env, ARM_FEATURE_THUMB2); + set_feature(env, ARM_FEATURE_MPIDR); + if (!arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V6K); + } else { + set_feature(env, ARM_FEATURE_V6); + } + + /* + * Always define VBAR for V7 CPUs even if it doesn't exist in + * non-EL3 configs. This is needed by some legacy boards. + */ + set_feature(env, ARM_FEATURE_VBAR); + } + if (arm_feature(env, ARM_FEATURE_V6K)) { + set_feature(env, ARM_FEATURE_V6); + set_feature(env, ARM_FEATURE_MVFR); + } + if (arm_feature(env, ARM_FEATURE_V6)) { + set_feature(env, ARM_FEATURE_V5); + if (!arm_feature(env, ARM_FEATURE_M)) { + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_jazelle, cpu)); + set_feature(env, ARM_FEATURE_AUXCR); + } + } + if (arm_feature(env, ARM_FEATURE_V5)) { + set_feature(env, ARM_FEATURE_V4T); + } + if (arm_feature(env, ARM_FEATURE_LPAE)) { + set_feature(env, ARM_FEATURE_V7MP); + } + if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { + set_feature(env, ARM_FEATURE_CBAR); + } + if (arm_feature(env, ARM_FEATURE_THUMB2) && + !arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_THUMB_DSP); + } +} + void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - /* M profile implies PMSA. We have to do this here rather than - * in realize with the other feature-implication checks because - * we look at the PMSA bit to see if we should add some properties. + /* + * Some features imply others. Figure this out now, because we + * are going to look at the feature bits in deciding which + * properties to add. */ - if (arm_feature(&cpu->env, ARM_FEATURE_M)) { - set_feature(&cpu->env, ARM_FEATURE_PMSA); - } + arm_cpu_propagate_feature_implications(cpu); if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) CPUARMState *env = &cpu->env; int pagebits; Error *local_err = NULL; - bool no_aa32 = false; /* Use pc-relative instructions in system-mode */ #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->isar.id_isar3 = u; } - /* Some features automatically imply others: */ - if (arm_feature(env, ARM_FEATURE_V8)) { - if (arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V7); - } else { - set_feature(env, ARM_FEATURE_V7VE); - } - } - - /* - * There exist AArch64 cpus without AArch32 support. When KVM - * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. - * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. - * As a general principle, we also do not make ID register - * consistency checks anywhere unless using TCG, because only - * for TCG would a consistency-check failure be a QEMU bug. - */ - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { - no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); - } - - if (arm_feature(env, ARM_FEATURE_V7VE)) { - /* v7 Virtualization Extensions. In real hardware this implies - * EL2 and also the presence of the Security Extensions. - * For QEMU, for backwards-compatibility we implement some - * CPUs or CPU configs which have no actual EL2 or EL3 but do - * include the various other features that V7VE implies. - * Presence of EL2 itself is ARM_FEATURE_EL2, and of the - * Security Extensions is ARM_FEATURE_EL3. - */ - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_arm_div, cpu)); - set_feature(env, ARM_FEATURE_LPAE); - set_feature(env, ARM_FEATURE_V7); - } - if (arm_feature(env, ARM_FEATURE_V7)) { - set_feature(env, ARM_FEATURE_VAPA); - set_feature(env, ARM_FEATURE_THUMB2); - set_feature(env, ARM_FEATURE_MPIDR); - if (!arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V6K); - } else { - set_feature(env, ARM_FEATURE_V6); - } - - /* Always define VBAR for V7 CPUs even if it doesn't exist in - * non-EL3 configs. This is needed by some legacy boards. - */ - set_feature(env, ARM_FEATURE_VBAR); - } - if (arm_feature(env, ARM_FEATURE_V6K)) { - set_feature(env, ARM_FEATURE_V6); - set_feature(env, ARM_FEATURE_MVFR); - } - if (arm_feature(env, ARM_FEATURE_V6)) { - set_feature(env, ARM_FEATURE_V5); - if (!arm_feature(env, ARM_FEATURE_M)) { - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_jazelle, cpu)); - set_feature(env, ARM_FEATURE_AUXCR); - } - } - if (arm_feature(env, ARM_FEATURE_V5)) { - set_feature(env, ARM_FEATURE_V4T); - } - if (arm_feature(env, ARM_FEATURE_LPAE)) { - set_feature(env, ARM_FEATURE_V7MP); - } - if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { - set_feature(env, ARM_FEATURE_CBAR); - } - if (arm_feature(env, ARM_FEATURE_THUMB2) && - !arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_THUMB_DSP); - } /* * We rely on no XScale CPU having VFP so we can use the same bits in the -- 2.34.1 M-profile CPUs generally allow configuration of the number of MPU regions that they have. We don't currently model this, so our implementations of some of the board models provide CPUs with the wrong number of regions. RTOSes like Zephyr that hardcode the expected number of regions may therefore not run on the model if they are set up to run on real hardware. Add properties mpu-ns-regions and mpu-s-regions to the ARMV7M object, matching the ability of hardware to configure the number of Secure and NonSecure regions separately. Our actual CPU implementation doesn't currently support that, and it happens that none of the MPS boards we model set the number of regions differently for Secure vs NonSecure, so we provide an interface to the boards and SoCs that won't need to change if we ever do add that functionality in future, but make it an error to configure the two properties to different values. (The property name on the CPU is the somewhat misnamed-for-M-profile "pmsav7-dregion", so we don't follow that naming convention for the properties here. The TRM doesn't say what the CPU configuration variable names are, so we pick something, and follow the lowercase convention we already have for properties here.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-3-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 8 ++++++++ hw/arm/armv7m.c | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ARMv7MState, ARMV7M) * + Property "vfp": enable VFP (forwarded to CPU object) * + Property "dsp": enable DSP (forwarded to CPU object) * + Property "enable-bitband": expose bitbanded IO + * + Property "mpu-ns-regions": number of Non-Secure MPU regions (forwarded + * to CPU object pmsav7-dregion property; default is whatever the default + * for the CPU is) + * + Property "mpu-s-regions": number of Secure MPU regions (default is + * whatever the default for the CPU is; must currently be set to the same + * value as mpu-ns-regions if the CPU implements the Security Extension) * + Clock input "refclk" is the external reference clock for the systick timers * + Clock input "cpuclk" is the main CPU clock */ @@ -XXX,XX +XXX,XX @@ struct ARMv7MState { Object *idau; uint32_t init_svtor; uint32_t init_nsvtor; + uint32_t mpu_ns_regions; + uint32_t mpu_s_regions; bool enable_bitband; bool start_powered_off; bool vfp; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) } } + /* + * Real M-profile hardware can be configured with a different number of + * MPU regions for Secure vs NonSecure. QEMU's CPU implementation doesn't + * support that yet, so catch attempts to select that. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + s->mpu_ns_regions != s->mpu_s_regions) { + error_setg(errp, + "mpu-ns-regions and mpu-s-regions properties must have the same value"); + return; + } + if (s->mpu_ns_regions != UINT_MAX && + object_property_find(OBJECT(s->cpu), "pmsav7-dregion")) { + if (!object_property_set_uint(OBJECT(s->cpu), "pmsav7-dregion", + s->mpu_ns_regions, errp)) { + return; + } + } + /* * Tell the CPU where the NVIC is; it will fail realize if it doesn't * have one. Similarly, tell the NVIC where its CPU is. @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { false), DEFINE_PROP_BOOL("vfp", ARMv7MState, vfp, true), DEFINE_PROP_BOOL("dsp", ARMv7MState, dsp, true), + DEFINE_PROP_UINT32("mpu-ns-regions", ARMv7MState, mpu_ns_regions, UINT_MAX), + DEFINE_PROP_UINT32("mpu-s-regions", ARMv7MState, mpu_s_regions, UINT_MAX), DEFINE_PROP_END_OF_LIST(), }; -- 2.34.1 The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The MPS2/MPS3 FPGA images don't override these except in the case of AN547, which uses 16 MPU regions. Define properties on the ARMSSE object for the MPU regions (using the same names as the documented RTL configuration settings, and following the pattern we already have for this device of using all-caps names as the RTL does), and set them in the board code. We don't actually need to override the default except on AN547, but it's simpler code to have the board code set them always rather than tracking which board subtypes want to set them to a non-default value separately from what that value is. Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524 we now correctly use 8 MPU regions, while mps3-an547 stays at its current 16 regions. It's possible some guest code wrongly depended on the previous incorrectly modeled number of memory regions. (Such guest code should ideally check the number of regions via the MPU_TYPE register.) The old behaviour can be obtained with additional -global arguments to QEMU: For mps2-an521 and mps2-an524: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16 For mps2-an505: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 NB that the way the implementation allows this use of -global is slightly fragile: if the board code explicitly sets the properties on the sse-200 object, this overrides the -global command line option. So we rely on: - the boards that need fixing all happen to use the SSE defaults - we can write the board code to only set the property if it is different from the default, rather than having all boards explicitly set the property - the board that does need to use a non-default value happens to need to set it to the same value (16) we previously used This works, but there are some kinds of refactoring of the mps2-tz.c code that would break the support for -global here. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 5 +++++ hw/arm/armsse.c | 16 ++++++++++++++++ hw/arm/mps2-tz.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an * SSE-200 both are present; CPU0 in an SSE-200 has neither. * Since the IoTKit has only one CPU, it does not have the CPU1_* properties. + * + QOM properties "CPU0_MPU_NS", "CPU0_MPU_S", "CPU1_MPU_NS" and "CPU1_MPU_S" + * which set the number of MPU regions on the CPUs. If there is only one + * CPU the CPU1 properties are not present. * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, * which are wired to its NVIC lines 32 .. n+32 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t exp_numirq; uint32_t sram_addr_width; uint32_t init_svtor; + uint32_t cpu_mpu_ns[SSE_MAX_CPUS]; + uint32_t cpu_mpu_s[SSE_MAX_CPUS]; bool cpu_fpu[SSE_MAX_CPUS]; bool cpu_dsp[SSE_MAX_CPUS]; }; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse200_properties[] = { DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], false), DEFINE_PROP_BOOL("CPU1_FPU", ARMSSE, cpu_fpu[1], true), DEFINE_PROP_BOOL("CPU1_DSP", ARMSSE, cpu_dsp[1], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), + DEFINE_PROP_UINT32("CPU1_MPU_NS", ARMSSE, cpu_mpu_ns[1], 8), + DEFINE_PROP_UINT32("CPU1_MPU_S", ARMSSE, cpu_mpu_s[1], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse300_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } } + if (!object_property_set_uint(cpuobj, "mpu-ns-regions", + s->cpu_mpu_ns[i], errp)) { + return; + } + if (!object_property_set_uint(cpuobj, "mpu-s-regions", + s->cpu_mpu_s[i], errp)) { + return; + } if (i > 0) { memory_region_add_subregion_overlap(&s->cpu_container[i], 0, diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineClass { int uart_overflow_irq; /* number of the combined UART overflow IRQ */ uint32_t init_svtor; /* init-svtor setting for SSE */ uint32_t sram_addr_width; /* SRAM_ADDR_WIDTH setting for SSE */ + uint32_t cpu0_mpu_ns; /* CPU0_MPU_NS setting for SSE */ + uint32_t cpu0_mpu_s; /* CPU0_MPU_S setting for SSE */ + uint32_t cpu1_mpu_ns; /* CPU1_MPU_NS setting for SSE */ + uint32_t cpu1_mpu_s; /* CPU1_MPU_S setting for SSE */ const RAMInfo *raminfo; const char *armsse_type; uint32_t boot_ram_size; /* size of ram at address 0; 0 == find in raminfo */ @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) #define MPS3_DDR_SIZE (2 * GiB) #endif +/* For cpu{0,1}_mpu_{ns,s}, means "leave at SSE's default value" */ +#define MPU_REGION_DEFAULT UINT32_MAX + static const uint32_t an505_oscclk[] = { 40000000, 24580000, @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq); qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor); + if (mmc->cpu0_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_NS", mmc->cpu0_mpu_ns); + } + if (mmc->cpu0_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_S", mmc->cpu0_mpu_s); + } + if (object_property_find(OBJECT(iotkitdev), "CPU1_MPU_NS")) { + if (mmc->cpu1_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_NS", mmc->cpu1_mpu_ns); + } + if (mmc->cpu1_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_S", mmc->cpu1_mpu_s); + } + } qdev_prop_set_uint32(iotkitdev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); @@ -XXX,XX +XXX,XX @@ static void mps2tz_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); mc->init = mps2tz_common_init; mc->reset = mps2_machine_reset; iic->check = mps2_tz_idau_check; + + /* Most machines leave these at the SSE defaults */ + mmc->cpu0_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu0_mpu_s = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_s = MPU_REGION_DEFAULT; } static void mps2tz_set_default_ram_info(MPS2TZMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3tz_an547_class_init(ObjectClass *oc, void *data) mmc->numirq = 96; mmc->uart_overflow_irq = 48; mmc->init_svtor = 0x00000000; + mmc->cpu0_mpu_s = mmc->cpu0_mpu_ns = 16; mmc->sram_addr_width = 21; mmc->raminfo = an547_raminfo; mmc->armsse_type = TYPE_SSE300; -- 2.34.1