Just flushing my target-arm queue since I won't be working next week :-) -- PMM The following changes since commit b3cd3b5a66f0dddfe3d5ba2bef13cd4f5b89cde9: Merge tag 'pull-riscv-to-apply-20220610' of github.com:alistair23/qemu into staging (2022-06-09 22:08:27 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220610 for you to fetch changes up to 90c072e063737e9e8f431489bbd334452f89056e: semihosting/config: Merge --semihosting-config option groups (2022-06-10 14:32:36 +0100) ---------------------------------------------------------------- * refactor exception routing code * fix SCR_EL3 RAO/RAZ bits * gdbstub: Don't use GDB syscalls if no GDB is attached * semihosting/config: Merge --semihosting-config option groups * tests/qtest: Reduce npcm7xx_sdhci test image size ---------------------------------------------------------------- Hao Wu (1): tests/qtest: Reduce npcm7xx_sdhci test image size Peter Maydell (2): gdbstub: Don't use GDB syscalls if no GDB is attached semihosting/config: Merge --semihosting-config option groups Richard Henderson (25): target/arm: Mark exception helpers as noreturn target/arm: Add coproc parameter to syn_fp_access_trap target/arm: Move exception_target_el out of line target/arm: Move arm_singlestep_active out of line target/arm: Move arm_generate_debug_exceptions out of line target/arm: Use is_a64 in arm_generate_debug_exceptions target/arm: Move exception_bkpt_insn to debug_helper.c target/arm: Move arm_debug_exception_fsr to debug_helper.c target/arm: Rename helper_exception_with_syndrome target/arm: Introduce gen_exception_insn_el_v target/arm: Rename gen_exception_insn to gen_exception_insn_el target/arm: Introduce gen_exception_insn target/arm: Create helper_exception_swstep target/arm: Remove TBFLAG_ANY.DEBUG_TARGET_EL target/arm: Move gen_exception to translate.c target/arm: Rename gen_exception to gen_exception_el target/arm: Introduce gen_exception target/arm: Introduce gen_exception_el_v target/arm: Introduce helper_exception_with_syndrome target/arm: Remove default_exception_el target/arm: Create raise_exception_debug target/arm: Move arm_debug_target_el to debug_helper.c target/arm: Fix Secure PL1 tests in fp_exception_el target/arm: Adjust format test in scr_write target/arm: SCR_EL3.RW is RAO/WI without AArch32 EL[12] target/arm/cpu.h | 133 ++--------------------- target/arm/helper.h | 8 +- target/arm/internals.h | 43 +------- target/arm/syndrome.h | 7 +- target/arm/translate.h | 43 ++------ gdbstub.c | 14 ++- semihosting/config.c | 1 + target/arm/debug_helper.c | 220 +++++++++++++++++++++++++++++++++++++-- target/arm/helper.c | 53 ++++------ target/arm/op_helper.c | 52 +++++---- target/arm/translate-a64.c | 34 +++--- target/arm/translate-m-nocp.c | 15 ++- target/arm/translate-mve.c | 3 +- target/arm/translate-vfp.c | 18 +++- target/arm/translate.c | 106 ++++++++++--------- tests/qtest/npcm7xx_sdhci-test.c | 2 +- 16 files changed, 390 insertions(+), 362 deletions(-) From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(usad8, TCG_CALL_NO_RWG_SE, i32, i32, i32) DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) -DEF_HELPER_2(exception_internal, void, env, i32) -DEF_HELPER_4(exception_with_syndrome, void, env, i32, i32, i32) -DEF_HELPER_2(exception_bkpt_insn, void, env, i32) +DEF_HELPER_2(exception_internal, noreturn, env, i32) +DEF_HELPER_4(exception_with_syndrome, noreturn, env, i32, i32, i32) +DEF_HELPER_2(exception_bkpt_insn, noreturn, env, i32) DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> With ARMv8, this field is always RES0. With ARMv7, targeting EL2 and TA=0, it is always 0xA. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/syndrome.h | 7 ++++--- target/arm/translate-a64.c | 3 ++- target/arm/translate-vfp.c | 14 ++++++++++++-- 3 files changed, 18 insertions(+), 6 deletions(-) diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_cp15_rrt_trap(int cv, int cond, int opc1, int crm, | (rt2 << 10) | (rt << 5) | (crm << 1) | isread; } -static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit) +static inline uint32_t syn_fp_access_trap(int cv, int cond, bool is_16bit, + int coproc) { - /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 coproc == 0xa */ + /* AArch32 FP trap or any AArch64 FP/SIMD trap: TA == 0 */ return (EC_ADVSIMDFPACCESSTRAP << ARM_EL_EC_SHIFT) | (is_16bit ? 0 : ARM_EL_IL) - | (cv << 24) | (cond << 20) | 0xa; + | (cv << 24) | (cond << 20) | coproc; } static inline uint32_t syn_simd_access_trap(int cv, int cond, bool is_16bit) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool fp_access_check(DisasContext *s) s->fp_access_checked = true; gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + syn_fp_access_trap(1, 0xe, false, 0), + s->fp_excp_el); return false; } s->fp_access_checked = true; diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static void gen_update_fp_context(DisasContext *s) static bool vfp_access_check_a(DisasContext *s, bool ignore_vfp_enabled) { if (s->fp_excp_el) { - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false), s->fp_excp_el); + /* + * The full syndrome is only used for HSR when HCPTR traps: + * For v8, when TA==0, coproc is RES0. + * For v7, any use of a Floating-point instruction or access + * to a Floating-point Extension register that is trapped to + * Hyp mode because of a trap configured in the HCPTR sets + * this field to 0xA. + */ + int coproc = arm_dc_feature(s, ARM_FEATURE_V8) ? 0 : 0xa; + uint32_t syn = syn_fp_access_trap(1, 0xe, false, coproc); + + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn, s->fp_excp_el); return false; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Move the function to op_helper.c, near raise_exception. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 16 +--------------- target/arm/op_helper.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx); int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx); -static inline int exception_target_el(CPUARMState *env) -{ - int target_el = MAX(1, arm_current_el(env)); - - /* - * No such thing as secure EL1 if EL3 is aarch32, - * so update the target EL to EL3 in this case. - */ - if (arm_is_secure(env) && !arm_el_is_aa64(env, 3) && target_el == 1) { - target_el = 3; - } - - return target_el; -} - /* Determine if allocation tags are available. */ static inline bool allocation_tag_access_enabled(CPUARMState *env, int el, uint64_t sctlr) @@ -XXX,XX +XXX,XX @@ void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); bool el_is_in_host(CPUARMState *env, int el); void aa32_max_features(ARMCPU *cpu); +int exception_target_el(CPUARMState *env); /* Powers of 2 for sve_vq_map et al. */ #define SVE_VQ_POW2_MAP \ diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ #define SIGNBIT (uint32_t)0x80000000 #define SIGNBIT64 ((uint64_t)1 << 63) +int exception_target_el(CPUARMState *env) +{ + int target_el = MAX(1, arm_current_el(env)); + + /* + * No such thing as secure EL1 if EL3 is aarch32, + * so update the target EL to EL3 in this case. + */ + if (arm_is_secure(env) && !arm_el_is_aa64(env, 3) && target_el == 1) { + target_el = 3; + } + + return target_el; +} + void raise_exception(CPUARMState *env, uint32_t excp, uint32_t syndrome, uint32_t target_el) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Move the function to debug_helper.c, and the declaration to internals.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 10 ---------- target/arm/internals.h | 1 + target/arm/debug_helper.c | 12 ++++++++++++ 3 files changed, 13 insertions(+), 10 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_generate_debug_exceptions(CPUARMState *env) } } -/* Is single-stepping active? (Note that the "is EL_D AArch64?" check - * implicitly means this always returns false in pre-v8 CPUs.) - */ -static inline bool arm_singlestep_active(CPUARMState *env) -{ - return extract32(env->cp15.mdscr_el1, 0, 1) - && arm_el_is_aa64(env, arm_debug_target_el(env)) - && arm_generate_debug_exceptions(env); -} - static inline bool arm_sctlr_b(CPUARMState *env) { return diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ bool el_is_in_host(CPUARMState *env, int el); void aa32_max_features(ARMCPU *cpu); int exception_target_el(CPUARMState *env); +bool arm_singlestep_active(CPUARMState *env); /* Powers of 2 for sve_vq_map et al. */ #define SVE_VQ_POW2_MAP \ diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/exec-all.h" #include "exec/helper-proto.h" + +/* + * Is single-stepping active? (Note that the "is EL_D AArch64?" check + * implicitly means this always returns false in pre-v8 CPUs.) + */ +bool arm_singlestep_active(CPUARMState *env) +{ + return extract32(env->cp15.mdscr_el1, 0, 1) + && arm_el_is_aa64(env, arm_debug_target_el(env)) + && arm_generate_debug_exceptions(env); +} + /* Return true if the linked breakpoint entry lbn passes its checks */ static bool linked_bp_matches(ARMCPU *cpu, int lbn) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Move arm_generate_debug_exceptions and its two subroutines, {aa32,aa64}_generate_debug_exceptions into debug_helper.c, and the one interface declaration to internals.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 91 ------------------------------------- target/arm/internals.h | 1 + target/arm/debug_helper.c | 94 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 95 insertions(+), 91 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool arm_v7m_csselr_razwi(ARMCPU *cpu) return (cpu->clidr & R_V7M_CLIDR_CTYPE_ALL_MASK) != 0; } -/* See AArch64.GenerateDebugExceptionsFrom() in ARM ARM pseudocode */ -static inline bool aa64_generate_debug_exceptions(CPUARMState *env) -{ - int cur_el = arm_current_el(env); - int debug_el; - - if (cur_el == 3) { - return false; - } - - /* MDCR_EL3.SDD disables debug events from Secure state */ - if (arm_is_secure_below_el3(env) - && extract32(env->cp15.mdcr_el3, 16, 1)) { - return false; - } - - /* - * Same EL to same EL debug exceptions need MDSCR_KDE enabled - * while not masking the (D)ebug bit in DAIF. - */ - debug_el = arm_debug_target_el(env); - - if (cur_el == debug_el) { - return extract32(env->cp15.mdscr_el1, 13, 1) - && !(env->daif & PSTATE_D); - } - - /* Otherwise the debug target needs to be a higher EL */ - return debug_el > cur_el; -} - -static inline bool aa32_generate_debug_exceptions(CPUARMState *env) -{ - int el = arm_current_el(env); - - if (el == 0 && arm_el_is_aa64(env, 1)) { - return aa64_generate_debug_exceptions(env); - } - - if (arm_is_secure(env)) { - int spd; - - if (el == 0 && (env->cp15.sder & 1)) { - /* SDER.SUIDEN means debug exceptions from Secure EL0 - * are always enabled. Otherwise they are controlled by - * SDCR.SPD like those from other Secure ELs. - */ - return true; - } - - spd = extract32(env->cp15.mdcr_el3, 14, 2); - switch (spd) { - case 1: - /* SPD == 0b01 is reserved, but behaves as 0b00. */ - case 0: - /* For 0b00 we return true if external secure invasive debug - * is enabled. On real hardware this is controlled by external - * signals to the core. QEMU always permits debug, and behaves - * as if DBGEN, SPIDEN, NIDEN and SPNIDEN are all tied high. - */ - return true; - case 2: - return false; - case 3: - return true; - } - } - - return el != 2; -} - -/* Return true if debugging exceptions are currently enabled. - * This corresponds to what in ARM ARM pseudocode would be - * if UsingAArch32() then - * return AArch32.GenerateDebugExceptions() - * else - * return AArch64.GenerateDebugExceptions() - * We choose to push the if() down into this function for clarity, - * since the pseudocode has it at all callsites except for the one in - * CheckSoftwareStep(), where it is elided because both branches would - * always return the same value. - */ -static inline bool arm_generate_debug_exceptions(CPUARMState *env) -{ - if (env->aarch64) { - return aa64_generate_debug_exceptions(env); - } else { - return aa32_generate_debug_exceptions(env); - } -} - static inline bool arm_sctlr_b(CPUARMState *env) { return diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ bool el_is_in_host(CPUARMState *env, int el); void aa32_max_features(ARMCPU *cpu); int exception_target_el(CPUARMState *env); bool arm_singlestep_active(CPUARMState *env); +bool arm_generate_debug_exceptions(CPUARMState *env); /* Powers of 2 for sve_vq_map et al. */ #define SVE_VQ_POW2_MAP \ diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/helper-proto.h" +/* See AArch64.GenerateDebugExceptionsFrom() in ARM ARM pseudocode */ +static bool aa64_generate_debug_exceptions(CPUARMState *env) +{ + int cur_el = arm_current_el(env); + int debug_el; + + if (cur_el == 3) { + return false; + } + + /* MDCR_EL3.SDD disables debug events from Secure state */ + if (arm_is_secure_below_el3(env) + && extract32(env->cp15.mdcr_el3, 16, 1)) { + return false; + } + + /* + * Same EL to same EL debug exceptions need MDSCR_KDE enabled + * while not masking the (D)ebug bit in DAIF. + */ + debug_el = arm_debug_target_el(env); + + if (cur_el == debug_el) { + return extract32(env->cp15.mdscr_el1, 13, 1) + && !(env->daif & PSTATE_D); + } + + /* Otherwise the debug target needs to be a higher EL */ + return debug_el > cur_el; +} + +static bool aa32_generate_debug_exceptions(CPUARMState *env) +{ + int el = arm_current_el(env); + + if (el == 0 && arm_el_is_aa64(env, 1)) { + return aa64_generate_debug_exceptions(env); + } + + if (arm_is_secure(env)) { + int spd; + + if (el == 0 && (env->cp15.sder & 1)) { + /* + * SDER.SUIDEN means debug exceptions from Secure EL0 + * are always enabled. Otherwise they are controlled by + * SDCR.SPD like those from other Secure ELs. + */ + return true; + } + + spd = extract32(env->cp15.mdcr_el3, 14, 2); + switch (spd) { + case 1: + /* SPD == 0b01 is reserved, but behaves as 0b00. */ + case 0: + /* + * For 0b00 we return true if external secure invasive debug + * is enabled. On real hardware this is controlled by external + * signals to the core. QEMU always permits debug, and behaves + * as if DBGEN, SPIDEN, NIDEN and SPNIDEN are all tied high. + */ + return true; + case 2: + return false; + case 3: + return true; + } + } + + return el != 2; +} + +/* + * Return true if debugging exceptions are currently enabled. + * This corresponds to what in ARM ARM pseudocode would be + * if UsingAArch32() then + * return AArch32.GenerateDebugExceptions() + * else + * return AArch64.GenerateDebugExceptions() + * We choose to push the if() down into this function for clarity, + * since the pseudocode has it at all callsites except for the one in + * CheckSoftwareStep(), where it is elided because both branches would + * always return the same value. + */ +bool arm_generate_debug_exceptions(CPUARMState *env) +{ + if (env->aarch64) { + return aa64_generate_debug_exceptions(env); + } else { + return aa32_generate_debug_exceptions(env); + } +} + /* * Is single-stepping active? (Note that the "is EL_D AArch64?" check * implicitly means this always returns false in pre-v8 CPUs.) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Use the accessor rather than the raw structure member. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ static bool aa32_generate_debug_exceptions(CPUARMState *env) */ bool arm_generate_debug_exceptions(CPUARMState *env) { - if (env->aarch64) { + if (is_a64(env)) { return aa64_generate_debug_exceptions(env); } else { return aa32_generate_debug_exceptions(env); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 31 +++++++++++++++++++++++++++++++ target/arm/op_helper.c | 29 ----------------------------- 2 files changed, 31 insertions(+), 29 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) } } +/* + * Raise an EXCP_BKPT with the specified syndrome register value, + * targeting the correct exception level for debug exceptions. + */ +void HELPER(exception_bkpt_insn)(CPUARMState *env, uint32_t syndrome) +{ + int debug_el = arm_debug_target_el(env); + int cur_el = arm_current_el(env); + + /* FSR will only be used if the debug target EL is AArch32. */ + env->exception.fsr = arm_debug_exception_fsr(env); + /* + * FAR is UNKNOWN: clear vaddress to avoid potentially exposing + * values to the guest that it shouldn't be able to see at its + * exception/security level. + */ + env->exception.vaddress = 0; + /* + * Other kinds of architectural debug exception are ignored if + * they target an exception level below the current one (in QEMU + * this is checked by arm_generate_debug_exceptions()). Breakpoint + * instructions are special because they always generate an exception + * to somewhere: if they can't go to the configured debug exception + * level they are taken to the current exception level. + */ + if (debug_el < cur_el) { + debug_el = cur_el; + } + raise_exception(env, EXCP_BKPT, syndrome, debug_el); +} + #if !defined(CONFIG_USER_ONLY) vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_with_syndrome)(CPUARMState *env, uint32_t excp, raise_exception(env, excp, syndrome, target_el); } -/* Raise an EXCP_BKPT with the specified syndrome register value, - * targeting the correct exception level for debug exceptions. - */ -void HELPER(exception_bkpt_insn)(CPUARMState *env, uint32_t syndrome) -{ - int debug_el = arm_debug_target_el(env); - int cur_el = arm_current_el(env); - - /* FSR will only be used if the debug target EL is AArch32. */ - env->exception.fsr = arm_debug_exception_fsr(env); - /* FAR is UNKNOWN: clear vaddress to avoid potentially exposing - * values to the guest that it shouldn't be able to see at its - * exception/security level. - */ - env->exception.vaddress = 0; - /* - * Other kinds of architectural debug exception are ignored if - * they target an exception level below the current one (in QEMU - * this is checked by arm_generate_debug_exceptions()). Breakpoint - * instructions are special because they always generate an exception - * to somewhere: if they can't go to the configured debug exception - * level they are taken to the current exception level. - */ - if (debug_el < cur_el) { - debug_el = cur_el; - } - raise_exception(env, EXCP_BKPT, syndrome, debug_el); -} - uint32_t HELPER(cpsr_read)(CPUARMState *env) { return cpsr_read(env) & ~CPSR_EXEC; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This function now now only used in debug_helper.c, so there is no reason to have a declaration in a header. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-9-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 25 ------------------------- target/arm/debug_helper.c | 26 ++++++++++++++++++++++++++ 2 files changed, 26 insertions(+), 25 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline TCR *regime_tcr(CPUARMState *env, ARMMMUIdx mmu_idx) return &env->cp15.tcr_el[regime_el(env, mmu_idx)]; } -/* Return the FSR value for a debug exception (watchpoint, hardware - * breakpoint or BKPT insn) targeting the specified exception level. - */ -static inline uint32_t arm_debug_exception_fsr(CPUARMState *env) -{ - ARMMMUFaultInfo fi = { .type = ARMFault_Debug }; - int target_el = arm_debug_target_el(env); - bool using_lpae = false; - - if (target_el == 2 || arm_el_is_aa64(env, target_el)) { - using_lpae = true; - } else { - if (arm_feature(env, ARM_FEATURE_LPAE) && - (env->cp15.tcr_el[target_el].raw_tcr & TTBCR_EAE)) { - using_lpae = true; - } - } - - if (using_lpae) { - return arm_fi_to_lfsc(&fi); - } else { - return arm_fi_to_sfsc(&fi); - } -} - /** * arm_num_brps: Return number of implemented breakpoints. * Note that the ID register BRPS field is "number of bps - 1", diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ bool arm_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) return check_watchpoints(cpu); } +/* + * Return the FSR value for a debug exception (watchpoint, hardware + * breakpoint or BKPT insn) targeting the specified exception level. + */ +static uint32_t arm_debug_exception_fsr(CPUARMState *env) +{ + ARMMMUFaultInfo fi = { .type = ARMFault_Debug }; + int target_el = arm_debug_target_el(env); + bool using_lpae = false; + + if (target_el == 2 || arm_el_is_aa64(env, target_el)) { + using_lpae = true; + } else { + if (arm_feature(env, ARM_FEATURE_LPAE) && + (env->cp15.tcr_el[target_el].raw_tcr & TTBCR_EAE)) { + using_lpae = true; + } + } + + if (using_lpae) { + return arm_fi_to_lfsc(&fi); + } else { + return arm_fi_to_sfsc(&fi); + } +} + void arm_debug_excp_handler(CPUState *cs) { /* -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Rename to helper_exception_with_syndrome_el, to emphasize that the target el is a parameter. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 2 +- target/arm/translate.h | 6 +++--- target/arm/op_helper.c | 6 +++--- target/arm/translate.c | 6 +++--- 4 files changed, 10 insertions(+), 10 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(usad8, TCG_CALL_NO_RWG_SE, i32, i32, i32) DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(exception_internal, noreturn, env, i32) -DEF_HELPER_4(exception_with_syndrome, noreturn, env, i32, i32, i32) +DEF_HELPER_4(exception_with_syndrome_el, noreturn, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, noreturn, env, i32) DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline void gen_ss_advance(DisasContext *s) static inline void gen_exception(int excp, uint32_t syndrome, uint32_t target_el) { - gen_helper_exception_with_syndrome(cpu_env, tcg_constant_i32(excp), - tcg_constant_i32(syndrome), - tcg_constant_i32(target_el)); + gen_helper_exception_with_syndrome_el(cpu_env, tcg_constant_i32(excp), + tcg_constant_i32(syndrome), + tcg_constant_i32(target_el)); } /* Generate an architectural singlestep exception */ diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(yield)(CPUARMState *env) * those EXCP values which are special cases for QEMU to interrupt * execution and not to be used for exceptions which are passed to * the guest (those must all have syndrome information and thus should - * use exception_with_syndrome). + * use exception_with_syndrome*). */ void HELPER(exception_internal)(CPUARMState *env, uint32_t excp) { @@ -XXX,XX +XXX,XX @@ void HELPER(exception_internal)(CPUARMState *env, uint32_t excp) } /* Raise an exception with the specified syndrome register value */ -void HELPER(exception_with_syndrome)(CPUARMState *env, uint32_t excp, - uint32_t syndrome, uint32_t target_el) +void HELPER(exception_with_syndrome_el)(CPUARMState *env, uint32_t excp, + uint32_t syndrome, uint32_t target_el) { raise_exception(env, excp, syndrome, target_el); } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_el(DisasContext *s, int excp, uint32_t syn, { gen_set_condexec(s); gen_set_pc_im(s, s->pc_curr); - gen_helper_exception_with_syndrome(cpu_env, - tcg_constant_i32(excp), - tcg_constant_i32(syn), tcg_el); + gen_helper_exception_with_syndrome_el(cpu_env, + tcg_constant_i32(excp), + tcg_constant_i32(syn), tcg_el); s->base.is_jmp = DISAS_NORETURN; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create a function below gen_exception_insn that takes the target_el as a TCGv_i32, replacing gen_exception_el. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_internal_insn(DisasContext *s, uint32_t pc, int excp) s->base.is_jmp = DISAS_NORETURN; } -void gen_exception_insn(DisasContext *s, uint64_t pc, int excp, - uint32_t syn, uint32_t target_el) +static void gen_exception_insn_el_v(DisasContext *s, uint64_t pc, int excp, + uint32_t syn, TCGv_i32 tcg_el) { if (s->aarch64) { gen_a64_set_pc_im(pc); @@ -XXX,XX +XXX,XX @@ void gen_exception_insn(DisasContext *s, uint64_t pc, int excp, gen_set_condexec(s); gen_set_pc_im(s, pc); } - gen_exception(excp, syn, target_el); + gen_helper_exception_with_syndrome_el(cpu_env, tcg_constant_i32(excp), + tcg_constant_i32(syn), tcg_el); s->base.is_jmp = DISAS_NORETURN; } +void gen_exception_insn(DisasContext *s, uint64_t pc, int excp, + uint32_t syn, uint32_t target_el) +{ + gen_exception_insn_el_v(s, pc, excp, syn, tcg_constant_i32(target_el)); +} + static void gen_exception_bkpt_insn(DisasContext *s, uint32_t syn) { gen_set_condexec(s); @@ -XXX,XX +XXX,XX @@ void unallocated_encoding(DisasContext *s) default_exception_el(s)); } -static void gen_exception_el(DisasContext *s, int excp, uint32_t syn, - TCGv_i32 tcg_el) -{ - gen_set_condexec(s); - gen_set_pc_im(s, s->pc_curr); - gen_helper_exception_with_syndrome_el(cpu_env, - tcg_constant_i32(excp), - tcg_constant_i32(syn), tcg_el); - s->base.is_jmp = DISAS_NORETURN; -} - /* Force a TB lookup after an instruction that changes the CPU state. */ void gen_lookup_tb(DisasContext *s) { @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, tcg_el = tcg_constant_i32(3); } - gen_exception_el(s, EXCP_UDEF, syn_uncategorized(), tcg_el); + gen_exception_insn_el_v(s, s->pc_curr, EXCP_UDEF, + syn_uncategorized(), tcg_el); tcg_temp_free_i32(tcg_el); return false; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-12-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 4 ++-- target/arm/translate-a64.c | 36 ++++++++++++++++---------------- target/arm/translate-m-nocp.c | 16 +++++++------- target/arm/translate-mve.c | 4 ++-- target/arm/translate-vfp.c | 6 +++--- target/arm/translate.c | 39 ++++++++++++++++++----------------- 6 files changed, 53 insertions(+), 52 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ void arm_jump_cc(DisasCompare *cmp, TCGLabel *label); void arm_gen_test_cc(int cc, TCGLabel *label); MemOp pow2_align(unsigned i); void unallocated_encoding(DisasContext *s); -void gen_exception_insn(DisasContext *s, uint64_t pc, int excp, - uint32_t syn, uint32_t target_el); +void gen_exception_insn_el(DisasContext *s, uint64_t pc, int excp, + uint32_t syn, uint32_t target_el); /* Return state of Alternate Half-precision flag, caller frees result */ static inline TCGv_i32 get_ahp_flag(void) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool fp_access_check(DisasContext *s) assert(!s->fp_access_checked); s->fp_access_checked = true; - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_fp_access_trap(1, 0xe, false, 0), - s->fp_excp_el); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, + syn_fp_access_trap(1, 0xe, false, 0), + s->fp_excp_el); return false; } s->fp_access_checked = true; @@ -XXX,XX +XXX,XX @@ bool sve_access_check(DisasContext *s) assert(!s->sve_access_checked); s->sve_access_checked = true; - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_sve_access_trap(), s->sve_excp_el); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, + syn_sve_access_trap(), s->sve_excp_el); return false; } s->sve_access_checked = true; @@ -XXX,XX +XXX,XX @@ static void gen_sysreg_undef(DisasContext *s, bool isread, } else { syndrome = syn_uncategorized(); } - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syndrome, - default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, syndrome, + default_exception_el(s)); } /* MRS - move from system register @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) switch (op2_ll) { case 1: /* SVC */ gen_ss_advance(s); - gen_exception_insn(s, s->base.pc_next, EXCP_SWI, - syn_aa64_svc(imm16), default_exception_el(s)); + gen_exception_insn_el(s, s->base.pc_next, EXCP_SWI, + syn_aa64_svc(imm16), default_exception_el(s)); break; case 2: /* HVC */ if (s->current_el == 0) { @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) gen_a64_set_pc_im(s->pc_curr); gen_helper_pre_hvc(cpu_env); gen_ss_advance(s); - gen_exception_insn(s, s->base.pc_next, EXCP_HVC, - syn_aa64_hvc(imm16), 2); + gen_exception_insn_el(s, s->base.pc_next, EXCP_HVC, + syn_aa64_hvc(imm16), 2); break; case 3: /* SMC */ if (s->current_el == 0) { @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) gen_a64_set_pc_im(s->pc_curr); gen_helper_pre_smc(cpu_env, tcg_constant_i32(syn_aa64_smc(imm16))); gen_ss_advance(s); - gen_exception_insn(s, s->base.pc_next, EXCP_SMC, - syn_aa64_smc(imm16), 3); + gen_exception_insn_el(s, s->base.pc_next, EXCP_SMC, + syn_aa64_smc(imm16), 3); break; default: unallocated_encoding(s); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) * Illegal execution state. This has priority over BTI * exceptions, but comes after instruction abort exceptions. */ - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_illegalstate(), default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, + syn_illegalstate(), default_exception_el(s)); return; } @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) if (s->btype != 0 && s->guarded_page && !btype_destination_ok(insn, s->bt, s->btype)) { - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_btitrap(s->btype), - default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, + syn_btitrap(s->btype), + default_exception_el(s)); return; } } else { diff --git a/target/arm/translate-m-nocp.c b/target/arm/translate-m-nocp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-m-nocp.c +++ b/target/arm/translate-m-nocp.c @@ -XXX,XX +XXX,XX @@ static bool trans_VSCCLRM(DisasContext *s, arg_VSCCLRM *a) tcg_gen_brcondi_i32(TCG_COND_EQ, sfpa, 0, s->condlabel); if (s->fp_excp_el != 0) { - gen_exception_insn(s, s->pc_curr, EXCP_NOCP, - syn_uncategorized(), s->fp_excp_el); + gen_exception_insn_el(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), s->fp_excp_el); return true; } @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_write(DisasContext *s, int regno, if (!vfp_access_check_m(s, true)) { /* * This was only a conditional exception, so override - * gen_exception_insn()'s default to DISAS_NORETURN + * gen_exception_insn_el()'s default to DISAS_NORETURN */ s->base.is_jmp = DISAS_NEXT; break; @@ -XXX,XX +XXX,XX @@ static bool gen_M_fp_sysreg_read(DisasContext *s, int regno, if (!vfp_access_check_m(s, true)) { /* * This was only a conditional exception, so override - * gen_exception_insn()'s default to DISAS_NORETURN + * gen_exception_insn_el()'s default to DISAS_NORETURN */ s->base.is_jmp = DISAS_NEXT; break; @@ -XXX,XX +XXX,XX @@ static bool trans_NOCP(DisasContext *s, arg_nocp *a) } if (a->cp != 10) { - gen_exception_insn(s, s->pc_curr, EXCP_NOCP, - syn_uncategorized(), default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), default_exception_el(s)); return true; } if (s->fp_excp_el != 0) { - gen_exception_insn(s, s->pc_curr, EXCP_NOCP, - syn_uncategorized(), s->fp_excp_el); + gen_exception_insn_el(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), s->fp_excp_el); return true; } diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ bool mve_eci_check(DisasContext *s) return true; default: /* Reserved value: INVSTATE UsageFault */ - gen_exception_insn(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), - default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), + default_exception_el(s)); return false; } } diff --git a/target/arm/translate-vfp.c b/target/arm/translate-vfp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-vfp.c +++ b/target/arm/translate-vfp.c @@ -XXX,XX +XXX,XX @@ static bool vfp_access_check_a(DisasContext *s, bool ignore_vfp_enabled) int coproc = arm_dc_feature(s, ARM_FEATURE_V8) ? 0 : 0xa; uint32_t syn = syn_fp_access_trap(1, 0xe, false, coproc); - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn, s->fp_excp_el); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, syn, s->fp_excp_el); return false; } @@ -XXX,XX +XXX,XX @@ bool vfp_access_check_m(DisasContext *s, bool skip_context_update) * the encoding space handled by the patterns in m-nocp.decode, * and for them we may need to raise NOCP here. */ - gen_exception_insn(s, s->pc_curr, EXCP_NOCP, - syn_uncategorized(), s->fp_excp_el); + gen_exception_insn_el(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), s->fp_excp_el); return false; } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_insn_el_v(DisasContext *s, uint64_t pc, int excp, s->base.is_jmp = DISAS_NORETURN; } -void gen_exception_insn(DisasContext *s, uint64_t pc, int excp, - uint32_t syn, uint32_t target_el) +void gen_exception_insn_el(DisasContext *s, uint64_t pc, int excp, + uint32_t syn, uint32_t target_el) { gen_exception_insn_el_v(s, pc, excp, syn, tcg_constant_i32(target_el)); } @@ -XXX,XX +XXX,XX @@ static void gen_exception_bkpt_insn(DisasContext *s, uint32_t syn) void unallocated_encoding(DisasContext *s) { /* Unallocated and reserved encodings are uncategorized */ - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn_uncategorized(), - default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, syn_uncategorized(), + default_exception_el(s)); } /* Force a TB lookup after an instruction that changes the CPU state. */ @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, undef: /* If we get here then some access check did not pass */ - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_uncategorized(), exc_target); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, + syn_uncategorized(), exc_target); return false; } @@ -XXX,XX +XXX,XX @@ static void gen_srs(DisasContext *s, * For the UNPREDICTABLE cases we choose to UNDEF. */ if (s->current_el == 1 && !s->ns && mode == ARM_CPU_MODE_MON) { - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn_uncategorized(), 3); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, + syn_uncategorized(), 3); return; } @@ -XXX,XX +XXX,XX @@ static bool trans_WLS(DisasContext *s, arg_WLS *a) * Do the check-and-raise-exception by hand. */ if (s->fp_excp_el) { - gen_exception_insn(s, s->pc_curr, EXCP_NOCP, - syn_uncategorized(), s->fp_excp_el); + gen_exception_insn_el(s, s->pc_curr, EXCP_NOCP, + syn_uncategorized(), s->fp_excp_el); return true; } } @@ -XXX,XX +XXX,XX @@ static bool trans_LE(DisasContext *s, arg_LE *a) tmp = load_cpu_field(v7m.ltpsize); tcg_gen_brcondi_i32(TCG_COND_EQ, tmp, 4, skipexc); tcg_temp_free_i32(tmp); - gen_exception_insn(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), - default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), + default_exception_el(s)); gen_set_label(skipexc); } @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) * UsageFault exception. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - gen_exception_insn(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), - default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), + default_exception_el(s)); return; } @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) * Illegal execution state. This has priority over BTI * exceptions, but comes after instruction abort exceptions. */ - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_illegalstate(), default_exception_el(s)); + gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, + syn_illegalstate(), default_exception_el(s)); return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) * Illegal execution state. This has priority over BTI * exceptions, but comes after instruction abort exceptions. */ - gen_exception_insn(dc, dc->pc_curr, EXCP_UDEF, - syn_illegalstate(), default_exception_el(dc)); + gen_exception_insn_el(dc, dc->pc_curr, EXCP_UDEF, + syn_illegalstate(), default_exception_el(dc)); return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) */ tcg_remove_ops_after(dc->insn_eci_rewind); dc->condjmp = 0; - gen_exception_insn(dc, dc->pc_curr, EXCP_INVSTATE, syn_uncategorized(), - default_exception_el(dc)); + gen_exception_insn_el(dc, dc->pc_curr, EXCP_INVSTATE, syn_uncategorized(), + default_exception_el(dc)); } arm_post_translate_insn(dc); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create a new wrapper function that passes the default exception target to gen_exception_insn_el. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-13-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 1 + target/arm/translate-a64.c | 15 ++++++--------- target/arm/translate-m-nocp.c | 3 +-- target/arm/translate-mve.c | 3 +-- target/arm/translate.c | 29 +++++++++++++---------------- 5 files changed, 22 insertions(+), 29 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ MemOp pow2_align(unsigned i); void unallocated_encoding(DisasContext *s); void gen_exception_insn_el(DisasContext *s, uint64_t pc, int excp, uint32_t syn, uint32_t target_el); +void gen_exception_insn(DisasContext *s, uint64_t pc, int excp, uint32_t syn); /* Return state of Alternate Half-precision flag, caller frees result */ static inline TCGv_i32 get_ahp_flag(void) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_sysreg_undef(DisasContext *s, bool isread, } else { syndrome = syn_uncategorized(); } - gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, syndrome, - default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syndrome); } /* MRS - move from system register @@ -XXX,XX +XXX,XX @@ static void disas_exc(DisasContext *s, uint32_t insn) switch (op2_ll) { case 1: /* SVC */ gen_ss_advance(s); - gen_exception_insn_el(s, s->base.pc_next, EXCP_SWI, - syn_aa64_svc(imm16), default_exception_el(s)); + gen_exception_insn(s, s->base.pc_next, EXCP_SWI, + syn_aa64_svc(imm16)); break; case 2: /* HVC */ if (s->current_el == 0) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) * Illegal execution state. This has priority over BTI * exceptions, but comes after instruction abort exceptions. */ - gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, - syn_illegalstate(), default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn_illegalstate()); return; } @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) if (s->btype != 0 && s->guarded_page && !btype_destination_ok(insn, s->bt, s->btype)) { - gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, - syn_btitrap(s->btype), - default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_btitrap(s->btype)); return; } } else { diff --git a/target/arm/translate-m-nocp.c b/target/arm/translate-m-nocp.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-m-nocp.c +++ b/target/arm/translate-m-nocp.c @@ -XXX,XX +XXX,XX @@ static bool trans_NOCP(DisasContext *s, arg_nocp *a) } if (a->cp != 10) { - gen_exception_insn_el(s, s->pc_curr, EXCP_NOCP, - syn_uncategorized(), default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_NOCP, syn_uncategorized()); return true; } diff --git a/target/arm/translate-mve.c b/target/arm/translate-mve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-mve.c +++ b/target/arm/translate-mve.c @@ -XXX,XX +XXX,XX @@ bool mve_eci_check(DisasContext *s) return true; default: /* Reserved value: INVSTATE UsageFault */ - gen_exception_insn_el(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), - default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized()); return false; } } diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ void gen_exception_insn_el(DisasContext *s, uint64_t pc, int excp, gen_exception_insn_el_v(s, pc, excp, syn, tcg_constant_i32(target_el)); } +void gen_exception_insn(DisasContext *s, uint64_t pc, int excp, uint32_t syn) +{ + gen_exception_insn_el(s, pc, excp, syn, default_exception_el(s)); +} + static void gen_exception_bkpt_insn(DisasContext *s, uint32_t syn) { gen_set_condexec(s); @@ -XXX,XX +XXX,XX @@ static void gen_exception_bkpt_insn(DisasContext *s, uint32_t syn) void unallocated_encoding(DisasContext *s) { /* Unallocated and reserved encodings are uncategorized */ - gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, syn_uncategorized(), - default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn_uncategorized()); } /* Force a TB lookup after an instruction that changes the CPU state. */ @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, * an exception and return false. Otherwise it will return true, * and set *tgtmode and *regno appropriately. */ - int exc_target = default_exception_el(s); - /* These instructions are present only in ARMv8, or in ARMv7 with the * Virtualization Extensions. */ @@ -XXX,XX +XXX,XX @@ static bool msr_banked_access_decode(DisasContext *s, int r, int sysm, int rn, undef: /* If we get here then some access check did not pass */ - gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, - syn_uncategorized(), exc_target); + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn_uncategorized()); return false; } @@ -XXX,XX +XXX,XX @@ static bool trans_LE(DisasContext *s, arg_LE *a) tmp = load_cpu_field(v7m.ltpsize); tcg_gen_brcondi_i32(TCG_COND_EQ, tmp, 4, skipexc); tcg_temp_free_i32(tmp); - gen_exception_insn_el(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), - default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized()); gen_set_label(skipexc); } @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) * UsageFault exception. */ if (arm_dc_feature(s, ARM_FEATURE_M)) { - gen_exception_insn_el(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized(), - default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_INVSTATE, syn_uncategorized()); return; } @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) * Illegal execution state. This has priority over BTI * exceptions, but comes after instruction abort exceptions. */ - gen_exception_insn_el(s, s->pc_curr, EXCP_UDEF, - syn_illegalstate(), default_exception_el(s)); + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, syn_illegalstate()); return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) * Illegal execution state. This has priority over BTI * exceptions, but comes after instruction abort exceptions. */ - gen_exception_insn_el(dc, dc->pc_curr, EXCP_UDEF, - syn_illegalstate(), default_exception_el(dc)); + gen_exception_insn(dc, dc->pc_curr, EXCP_UDEF, syn_illegalstate()); return; } @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) */ tcg_remove_ops_after(dc->insn_eci_rewind); dc->condjmp = 0; - gen_exception_insn_el(dc, dc->pc_curr, EXCP_INVSTATE, syn_uncategorized(), - default_exception_el(dc)); + gen_exception_insn(dc, dc->pc_curr, EXCP_INVSTATE, + syn_uncategorized()); } arm_post_translate_insn(dc); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Move the computation from gen_swstep_exception into a helper. This fixes a bug when: - MDSCR_EL1.KDE == 1 to enable debug exceptions within EL_D itself - we singlestep an ERET from EL_D to some lower EL Previously we were computing 'same el' based on the EL which executed the ERET instruction, whereas it ought to be computed based on the EL to which ERET returned. This happens naturally with the new helper, which runs after EL has been changed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-14-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/translate.h | 12 +++--------- target/arm/debug_helper.c | 16 ++++++++++++++++ 3 files changed, 20 insertions(+), 9 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, DEF_HELPER_2(exception_internal, noreturn, env, i32) DEF_HELPER_4(exception_with_syndrome_el, noreturn, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, noreturn, env, i32) +DEF_HELPER_2(exception_swstep, noreturn, env, i32) DEF_HELPER_2(exception_pc_alignment, noreturn, env, tl) DEF_HELPER_1(setend, void, env) DEF_HELPER_2(wfi, void, env, i32) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline void gen_exception(int excp, uint32_t syndrome, /* Generate an architectural singlestep exception */ static inline void gen_swstep_exception(DisasContext *s, int isv, int ex) { - bool same_el = (s->debug_target_el == s->current_el); - - /* - * If singlestep is targeting a lower EL than the current one, - * then s->ss_active must be false and we can never get here. - */ - assert(s->debug_target_el >= s->current_el); - - gen_exception(EXCP_UDEF, syn_swstep(same_el, isv, ex), s->debug_target_el); + /* Fill in the same_el field of the syndrome in the helper. */ + uint32_t syn = syn_swstep(false, isv, ex); + gen_helper_exception_swstep(cpu_env, tcg_constant_i32(syn)); } /* diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_bkpt_insn)(CPUARMState *env, uint32_t syndrome) raise_exception(env, EXCP_BKPT, syndrome, debug_el); } +void HELPER(exception_swstep)(CPUARMState *env, uint32_t syndrome) +{ + int debug_el = arm_debug_target_el(env); + int cur_el = arm_current_el(env); + + /* + * If singlestep is targeting a lower EL than the current one, then + * DisasContext.ss_active must be false and we can never get here. + */ + assert(debug_el >= cur_el); + if (debug_el == cur_el) { + syndrome |= 1 << ARM_EL_EC_SHIFT; + } + raise_exception(env, EXCP_UDEF, syndrome, debug_el); +} + #if !defined(CONFIG_USER_ONLY) vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We no longer need this value during translation, as it is now handled within the helpers. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-15-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 6 ++---- target/arm/translate.h | 2 -- target/arm/helper.c | 12 ++---------- target/arm/translate-a64.c | 1 - target/arm/translate.c | 1 - 5 files changed, 4 insertions(+), 18 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, BE_DATA, 3, 1) FIELD(TBFLAG_ANY, MMUIDX, 4, 4) /* Target EL if we take a floating-point-disabled exception */ FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2) -/* For A-profile only, target EL for debug exceptions. */ -FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 10, 2) /* Memory operations require alignment: SCTLR_ELx.A or CCR.UNALIGN_TRP */ -FIELD(TBFLAG_ANY, ALIGN_MEM, 12, 1) -FIELD(TBFLAG_ANY, PSTATE__IL, 13, 1) +FIELD(TBFLAG_ANY, ALIGN_MEM, 10, 1) +FIELD(TBFLAG_ANY, PSTATE__IL, 11, 1) /* * Bit usage when in AArch32 state, both A- and M-profile. diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { */ uint32_t svc_imm; int current_el; - /* Debug target exception level for single-step exceptions */ - int debug_target_el; GHashTable *cp_regs; uint64_t features; /* CPU features bits */ bool aarch64; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_m32(CPUARMState *env, int fp_el, return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } -static CPUARMTBFlags rebuild_hflags_aprofile(CPUARMState *env) -{ - CPUARMTBFlags flags = {}; - - DP_TBFLAG_ANY(flags, DEBUG_TARGET_EL, arm_debug_target_el(env)); - return flags; -} - static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, ARMMMUIdx mmu_idx) { - CPUARMTBFlags flags = rebuild_hflags_aprofile(env); + CPUARMTBFlags flags = {}; int el = arm_current_el(env); if (arm_sctlr(env, el) & SCTLR_A) { @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, ARMMMUIdx mmu_idx) { - CPUARMTBFlags flags = rebuild_hflags_aprofile(env); + CPUARMTBFlags flags = {}; ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; uint64_t sctlr; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->ss_active = EX_TBFLAG_ANY(tb_flags, SS_ACTIVE); dc->pstate_ss = EX_TBFLAG_ANY(tb_flags, PSTATE__SS); dc->is_ldex = false; - dc->debug_target_el = EX_TBFLAG_ANY(tb_flags, DEBUG_TARGET_EL); /* Bound the number of insns to execute to those left on the page. */ bound = -(dc->base.pc_first | TARGET_PAGE_MASK) / 4; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->v7m_lspact = EX_TBFLAG_M32(tb_flags, LSPACT); dc->mve_no_pred = EX_TBFLAG_M32(tb_flags, MVE_NO_PRED); } else { - dc->debug_target_el = EX_TBFLAG_ANY(tb_flags, DEBUG_TARGET_EL); dc->sctlr_b = EX_TBFLAG_A32(tb_flags, SCTLR__B); dc->hstr_active = EX_TBFLAG_A32(tb_flags, HSTR_ACTIVE); dc->ns = EX_TBFLAG_A32(tb_flags, NS); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This function is not required by any other translation file. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 8 -------- target/arm/translate.c | 7 +++++++ 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline void gen_ss_advance(DisasContext *s) } } -static inline void gen_exception(int excp, uint32_t syndrome, - uint32_t target_el) -{ - gen_helper_exception_with_syndrome_el(cpu_env, tcg_constant_i32(excp), - tcg_constant_i32(syndrome), - tcg_constant_i32(target_el)); -} - /* Generate an architectural singlestep exception */ static inline void gen_swstep_exception(DisasContext *s, int isv, int ex) { diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_internal_insn(DisasContext *s, uint32_t pc, int excp) s->base.is_jmp = DISAS_NORETURN; } +static void gen_exception(int excp, uint32_t syndrome, uint32_t target_el) +{ + gen_helper_exception_with_syndrome_el(cpu_env, tcg_constant_i32(excp), + tcg_constant_i32(syndrome), + tcg_constant_i32(target_el)); +} + static void gen_exception_insn_el_v(DisasContext *s, uint64_t pc, int excp, uint32_t syn, TCGv_i32 tcg_el) { -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_internal_insn(DisasContext *s, uint32_t pc, int excp) s->base.is_jmp = DISAS_NORETURN; } -static void gen_exception(int excp, uint32_t syndrome, uint32_t target_el) +static void gen_exception_el(int excp, uint32_t syndrome, uint32_t target_el) { gen_helper_exception_with_syndrome_el(cpu_env, tcg_constant_i32(excp), tcg_constant_i32(syndrome), @@ -XXX,XX +XXX,XX @@ static void arm_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) switch (dc->base.is_jmp) { case DISAS_SWI: gen_ss_advance(dc); - gen_exception(EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb), - default_exception_el(dc)); + gen_exception_el(EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb), + default_exception_el(dc)); break; case DISAS_HVC: gen_ss_advance(dc); - gen_exception(EXCP_HVC, syn_aa32_hvc(dc->svc_imm), 2); + gen_exception_el(EXCP_HVC, syn_aa32_hvc(dc->svc_imm), 2); break; case DISAS_SMC: gen_ss_advance(dc); - gen_exception(EXCP_SMC, syn_aa32_smc(), 3); + gen_exception_el(EXCP_SMC, syn_aa32_smc(), 3); break; case DISAS_NEXT: case DISAS_TOO_MANY: @@ -XXX,XX +XXX,XX @@ static void arm_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) gen_helper_yield(cpu_env); break; case DISAS_SWI: - gen_exception(EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb), - default_exception_el(dc)); + gen_exception_el(EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb), + default_exception_el(dc)); break; case DISAS_HVC: - gen_exception(EXCP_HVC, syn_aa32_hvc(dc->svc_imm), 2); + gen_exception_el(EXCP_HVC, syn_aa32_hvc(dc->svc_imm), 2); break; case DISAS_SMC: - gen_exception(EXCP_SMC, syn_aa32_smc(), 3); + gen_exception_el(EXCP_SMC, syn_aa32_smc(), 3); break; } } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Create a new wrapper function that passes the default exception target to gen_exception_el. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_el(int excp, uint32_t syndrome, uint32_t target_el) tcg_constant_i32(target_el)); } +static void gen_exception(DisasContext *s, int excp, uint32_t syndrome) +{ + gen_exception_el(excp, syndrome, default_exception_el(s)); +} + static void gen_exception_insn_el_v(DisasContext *s, uint64_t pc, int excp, uint32_t syn, TCGv_i32 tcg_el) { @@ -XXX,XX +XXX,XX @@ static void arm_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) switch (dc->base.is_jmp) { case DISAS_SWI: gen_ss_advance(dc); - gen_exception_el(EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb), - default_exception_el(dc)); + gen_exception(dc, EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb)); break; case DISAS_HVC: gen_ss_advance(dc); @@ -XXX,XX +XXX,XX @@ static void arm_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) gen_helper_yield(cpu_env); break; case DISAS_SWI: - gen_exception_el(EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb), - default_exception_el(dc)); + gen_exception(dc, EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb)); break; case DISAS_HVC: gen_exception_el(EXCP_HVC, syn_aa32_hvc(dc->svc_imm), 2); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Split out a common helper function for gen_exception_el and gen_exception_insn_el_v. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_internal_insn(DisasContext *s, uint32_t pc, int excp) s->base.is_jmp = DISAS_NORETURN; } -static void gen_exception_el(int excp, uint32_t syndrome, uint32_t target_el) +static void gen_exception_el_v(int excp, uint32_t syndrome, TCGv_i32 tcg_el) { gen_helper_exception_with_syndrome_el(cpu_env, tcg_constant_i32(excp), - tcg_constant_i32(syndrome), - tcg_constant_i32(target_el)); + tcg_constant_i32(syndrome), tcg_el); +} + +static void gen_exception_el(int excp, uint32_t syndrome, uint32_t target_el) +{ + gen_exception_el_v(excp, syndrome, tcg_constant_i32(target_el)); } static void gen_exception(DisasContext *s, int excp, uint32_t syndrome) @@ -XXX,XX +XXX,XX @@ static void gen_exception_insn_el_v(DisasContext *s, uint64_t pc, int excp, gen_set_condexec(s); gen_set_pc_im(s, pc); } - gen_helper_exception_with_syndrome_el(cpu_env, tcg_constant_i32(excp), - tcg_constant_i32(syn), tcg_el); + gen_exception_el_v(excp, syn, tcg_el); s->base.is_jmp = DISAS_NORETURN; } -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> With the helper we can use exception_target_el at runtime, instead of default_exception_el at translate time. While we're at it, remove the DisasContext parameter from gen_exception, as it is no longer used. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.h | 1 + target/arm/op_helper.c | 10 ++++++++++ target/arm/translate.c | 18 +++++++++++++----- 3 files changed, 24 insertions(+), 5 deletions(-) diff --git a/target/arm/helper.h b/target/arm/helper.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.h +++ b/target/arm/helper.h @@ -XXX,XX +XXX,XX @@ DEF_HELPER_FLAGS_2(usad8, TCG_CALL_NO_RWG_SE, i32, i32, i32) DEF_HELPER_FLAGS_3(sel_flags, TCG_CALL_NO_RWG_SE, i32, i32, i32, i32) DEF_HELPER_2(exception_internal, noreturn, env, i32) +DEF_HELPER_3(exception_with_syndrome, noreturn, env, i32, i32) DEF_HELPER_4(exception_with_syndrome_el, noreturn, env, i32, i32, i32) DEF_HELPER_2(exception_bkpt_insn, noreturn, env, i32) DEF_HELPER_2(exception_swstep, noreturn, env, i32) diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_with_syndrome_el)(CPUARMState *env, uint32_t excp, raise_exception(env, excp, syndrome, target_el); } +/* + * Raise an exception with the specified syndrome register value + * to the default target el. + */ +void HELPER(exception_with_syndrome)(CPUARMState *env, uint32_t excp, + uint32_t syndrome) +{ + raise_exception(env, excp, syndrome, exception_target_el(env)); +} + uint32_t HELPER(cpsr_read)(CPUARMState *env) { return cpsr_read(env) & ~CPSR_EXEC; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void gen_exception_el(int excp, uint32_t syndrome, uint32_t target_el) gen_exception_el_v(excp, syndrome, tcg_constant_i32(target_el)); } -static void gen_exception(DisasContext *s, int excp, uint32_t syndrome) +static void gen_exception(int excp, uint32_t syndrome) { - gen_exception_el(excp, syndrome, default_exception_el(s)); + gen_helper_exception_with_syndrome(cpu_env, tcg_constant_i32(excp), + tcg_constant_i32(syndrome)); } static void gen_exception_insn_el_v(DisasContext *s, uint64_t pc, int excp, @@ -XXX,XX +XXX,XX @@ void gen_exception_insn_el(DisasContext *s, uint64_t pc, int excp, void gen_exception_insn(DisasContext *s, uint64_t pc, int excp, uint32_t syn) { - gen_exception_insn_el(s, pc, excp, syn, default_exception_el(s)); + if (s->aarch64) { + gen_a64_set_pc_im(pc); + } else { + gen_set_condexec(s); + gen_set_pc_im(s, pc); + } + gen_exception(excp, syn); + s->base.is_jmp = DISAS_NORETURN; } static void gen_exception_bkpt_insn(DisasContext *s, uint32_t syn) @@ -XXX,XX +XXX,XX @@ static void arm_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) switch (dc->base.is_jmp) { case DISAS_SWI: gen_ss_advance(dc); - gen_exception(dc, EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb)); + gen_exception(EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb)); break; case DISAS_HVC: gen_ss_advance(dc); @@ -XXX,XX +XXX,XX @@ static void arm_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) gen_helper_yield(cpu_env); break; case DISAS_SWI: - gen_exception(dc, EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb)); + gen_exception(EXCP_SWI, syn_aa32_svc(dc->svc_imm, dc->thumb)); break; case DISAS_HVC: gen_exception_el(EXCP_HVC, syn_aa32_hvc(dc->svc_imm), 2); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This function is no longer used. At the same time, remove DisasContext.secure_routed_to_el3, as it in turn becomes unused. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.h | 16 ---------------- target/arm/translate-a64.c | 5 ----- target/arm/translate.c | 5 ----- 3 files changed, 26 deletions(-) diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int fp_excp_el; /* FP exception EL or 0 if enabled */ int sve_excp_el; /* SVE exception EL or 0 if enabled */ int vl; /* current vector length in bytes */ - /* Flag indicating that exceptions from secure mode are routed to EL3. */ - bool secure_routed_to_el3; bool vfp_enabled; /* FP enabled via FPSCR.EN */ int vec_len; int vec_stride; @@ -XXX,XX +XXX,XX @@ static inline int get_mem_index(DisasContext *s) return arm_to_core_mmu_idx(s->mmu_idx); } -/* Function used to determine the target exception EL when otherwise not known - * or default. - */ -static inline int default_exception_el(DisasContext *s) -{ - /* If we are coming from secure EL0 in a system with a 32-bit EL3, then - * there is no secure EL1, so we route exceptions to EL3. Otherwise, - * exceptions can only be routed to ELs above 1, so we target the higher of - * 1 or the current EL. - */ - return (s->mmu_idx == ARMMMUIdx_SE10_0 && s->secure_routed_to_el3) - ? 3 : MAX(1, s->current_el); -} - static inline void disas_set_insn_syndrome(DisasContext *s, uint32_t syn) { /* We don't need to save all of the syndrome so we mask and shift diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->condjmp = 0; dc->aarch64 = true; - /* If we are coming from secure EL0 in a system with a 32-bit EL3, then - * there is no secure EL1, so we route exceptions to EL3. - */ - dc->secure_routed_to_el3 = arm_feature(env, ARM_FEATURE_EL3) && - !arm_el_is_aa64(env, 3); dc->thumb = false; dc->sctlr_b = 0; dc->be_data = EX_TBFLAG_ANY(tb_flags, BE_DATA) ? MO_BE : MO_LE; diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) dc->condjmp = 0; dc->aarch64 = false; - /* If we are coming from secure EL0 in a system with a 32-bit EL3, then - * there is no secure EL1, so we route exceptions to EL3. - */ - dc->secure_routed_to_el3 = arm_feature(env, ARM_FEATURE_EL3) && - !arm_el_is_aa64(env, 3); dc->thumb = EX_TBFLAG_AM32(tb_flags, THUMB); dc->be_data = EX_TBFLAG_ANY(tb_flags, BE_DATA) ? MO_BE : MO_LE; condexec = EX_TBFLAG_AM32(tb_flags, CONDEXEC); -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Handle the debug vs current el exception test in one place. Leave EXCP_BKPT alone, since that treats debug < current differently. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/debug_helper.c | 44 +++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 20 deletions(-) diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/helper-proto.h" +/* + * Raise an exception to the debug target el. + * Modify syndrome to indicate when origin and target EL are the same. + */ +G_NORETURN static void +raise_exception_debug(CPUARMState *env, uint32_t excp, uint32_t syndrome) +{ + int debug_el = arm_debug_target_el(env); + int cur_el = arm_current_el(env); + + /* + * If singlestep is targeting a lower EL than the current one, then + * DisasContext.ss_active must be false and we can never get here. + * Similarly for watchpoint and breakpoint matches. + */ + assert(debug_el >= cur_el); + syndrome |= (debug_el == cur_el) << ARM_EL_EC_SHIFT; + raise_exception(env, excp, syndrome, debug_el); +} + /* See AArch64.GenerateDebugExceptionsFrom() in ARM ARM pseudocode */ static bool aa64_generate_debug_exceptions(CPUARMState *env) { @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) if (wp_hit) { if (wp_hit->flags & BP_CPU) { bool wnr = (wp_hit->flags & BP_WATCHPOINT_HIT_WRITE) != 0; - bool same_el = arm_debug_target_el(env) == arm_current_el(env); cs->watchpoint_hit = NULL; env->exception.fsr = arm_debug_exception_fsr(env); env->exception.vaddress = wp_hit->hitaddr; - raise_exception(env, EXCP_DATA_ABORT, - syn_watchpoint(same_el, 0, wnr), - arm_debug_target_el(env)); + raise_exception_debug(env, EXCP_DATA_ABORT, + syn_watchpoint(0, 0, wnr)); } } else { uint64_t pc = is_a64(env) ? env->pc : env->regs[15]; - bool same_el = (arm_debug_target_el(env) == arm_current_el(env)); /* * (1) GDB breakpoints should be handled first. @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) * exception/security level. */ env->exception.vaddress = 0; - raise_exception(env, EXCP_PREFETCH_ABORT, - syn_breakpoint(same_el), - arm_debug_target_el(env)); + raise_exception_debug(env, EXCP_PREFETCH_ABORT, syn_breakpoint(0)); } } @@ -XXX,XX +XXX,XX @@ void HELPER(exception_bkpt_insn)(CPUARMState *env, uint32_t syndrome) void HELPER(exception_swstep)(CPUARMState *env, uint32_t syndrome) { - int debug_el = arm_debug_target_el(env); - int cur_el = arm_current_el(env); - - /* - * If singlestep is targeting a lower EL than the current one, then - * DisasContext.ss_active must be false and we can never get here. - */ - assert(debug_el >= cur_el); - if (debug_el == cur_el) { - syndrome |= 1 << ARM_EL_EC_SHIFT; - } - raise_exception(env, EXCP_UDEF, syndrome, debug_el); + raise_exception_debug(env, EXCP_UDEF, syndrome); } #if !defined(CONFIG_USER_ONLY) -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> This function is no longer used outside debug_helper.c. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 21 --------------------- target/arm/debug_helper.c | 21 +++++++++++++++++++++ 2 files changed, 21 insertions(+), 21 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef enum ARMASIdx { ARMASIdx_TagS = 3, } ARMASIdx; -/* Return the Exception Level targeted by debug exceptions. */ -static inline int arm_debug_target_el(CPUARMState *env) -{ - bool secure = arm_is_secure(env); - bool route_to_el2 = false; - - if (arm_is_el2_enabled(env)) { - route_to_el2 = env->cp15.hcr_el2 & HCR_TGE || - env->cp15.mdcr_el2 & MDCR_TDE; - } - - if (route_to_el2) { - return 2; - } else if (arm_feature(env, ARM_FEATURE_EL3) && - !arm_el_is_aa64(env, 3) && secure) { - return 3; - } else { - return 1; - } -} - static inline bool arm_v7m_csselr_razwi(ARMCPU *cpu) { /* If all the CLIDR.Ctypem bits are 0 there are no caches, and diff --git a/target/arm/debug_helper.c b/target/arm/debug_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/debug_helper.c +++ b/target/arm/debug_helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/helper-proto.h" +/* Return the Exception Level targeted by debug exceptions. */ +static int arm_debug_target_el(CPUARMState *env) +{ + bool secure = arm_is_secure(env); + bool route_to_el2 = false; + + if (arm_is_el2_enabled(env)) { + route_to_el2 = env->cp15.hcr_el2 & HCR_TGE || + env->cp15.mdcr_el2 & MDCR_TDE; + } + + if (route_to_el2) { + return 2; + } else if (arm_feature(env, ARM_FEATURE_EL3) && + !arm_el_is_aa64(env, 3) && secure) { + return 3; + } else { + return 1; + } +} + /* * Raise an exception to the debug target el. * Modify syndrome to indicate when origin and target EL are the same. -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> We were using arm_is_secure and is_a64, which are tests against the current EL, as opposed to arm_el_is_aa64 and arm_is_secure_below_el3, which can be applied to a different EL than current. Consolidate the two tests. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609202901.1177572-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ int fp_exception_el(CPUARMState *env, int cur_el) int fpen = FIELD_EX64(env->cp15.cpacr_el1, CPACR_EL1, FPEN); switch (fpen) { + case 1: + if (cur_el != 0) { + break; + } + /* fall through */ case 0: case 2: - if (cur_el == 0 || cur_el == 1) { - /* Trap to PL1, which might be EL1 or EL3 */ - if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { - return 3; - } - return 1; - } - if (cur_el == 3 && !is_a64(env)) { - /* Secure PL1 running at EL3 */ + /* Trap from Secure PL0 or PL1 to Secure PL1. */ + if (!arm_el_is_aa64(env, 3) + && (cur_el == 3 || arm_is_secure_below_el3(env))) { return 3; } - break; - case 1: - if (cur_el == 0) { + if (cur_el <= 1) { return 1; } break; - case 3: - break; } } -- 2.25.1 From: Hao Wu <wuhaotsh@google.com> Creating 1GB image for a simple qtest is unnecessary and could lead to failures. We reduce the image size to 1MB to reduce the test overhead. Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20220609214125.4192212-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/npcm7xx_sdhci-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tests/qtest/npcm7xx_sdhci-test.c b/tests/qtest/npcm7xx_sdhci-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_sdhci-test.c +++ b/tests/qtest/npcm7xx_sdhci-test.c @@ -XXX,XX +XXX,XX @@ #define NPCM7XX_REG_SIZE 0x100 #define NPCM7XX_MMC_BA 0xF0842000 #define NPCM7XX_BLK_SIZE 512 -#define NPCM7XX_TEST_IMAGE_SIZE (1 << 30) +#define NPCM7XX_TEST_IMAGE_SIZE (1 << 20) char *sd_path; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Because reset always initializes the AA64 version, SCR_EL3, test the mode of EL3 instead of the type of the cpreg. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609214657.1217913-2-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) uint32_t valid_mask = 0x3fff; ARMCPU *cpu = env_archcpu(env); - if (ri->state == ARM_CP_STATE_AA64) { - if (arm_feature(env, ARM_FEATURE_AARCH64) && - !cpu_isar_feature(aa64_aa32_el1, cpu)) { - value |= SCR_FW | SCR_AW; /* these two bits are RES1. */ - } - valid_mask &= ~SCR_NET; + /* + * Because SCR_EL3 is the "real" cpreg and SCR is the alias, reset always + * passes the reginfo for SCR_EL3, which has type ARM_CP_STATE_AA64. + * Instead, choose the format based on the mode of EL3. + */ + if (arm_el_is_aa64(env, 3)) { + value |= SCR_FW | SCR_AW; /* RES1 */ + valid_mask &= ~SCR_NET; /* RES0 */ if (cpu_isar_feature(aa64_ras, cpu)) { valid_mask |= SCR_TERR; -- 2.25.1 From: Richard Henderson <richard.henderson@linaro.org> Since DDI0487F.a, the RW bit is RAO/WI. When specifically targeting such a cpu, e.g. cortex-a76, it is legitimate to ignore the bit within the secure monitor. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1062 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220609214657.1217913-3-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 5 +++++ target/arm/helper.c | 4 ++++ 2 files changed, 9 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ static inline bool isar_feature_aa64_aa32_el1(const ARMISARegisters *id) return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, EL1) >= 2; } +static inline bool isar_feature_aa64_aa32_el2(const ARMISARegisters *id) +{ + return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, EL2) >= 2; +} + static inline bool isar_feature_aa64_ras(const ARMISARegisters *id) { return FIELD_EX64(id->id_aa64pfr0, ID_AA64PFR0, RAS) != 0; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) value |= SCR_FW | SCR_AW; /* RES1 */ valid_mask &= ~SCR_NET; /* RES0 */ + if (!cpu_isar_feature(aa64_aa32_el1, cpu) && + !cpu_isar_feature(aa64_aa32_el2, cpu)) { + value |= SCR_RW; /* RAO/WI */ + } if (cpu_isar_feature(aa64_ras, cpu)) { valid_mask |= SCR_TERR; } -- 2.25.1 In two places in gdbstub.c we look at gdbserver_state.init to decide whether we're going to do a semihosting syscall via the gdb remote protocol: * when setting up, if the user didn't explicitly select either native semihosting or gdb semihosting, we autoselect, with the intended behaviour "use gdb if gdb is connected" * when the semihosting layer attempts to do a syscall via gdb, we silently ignore it if the gdbstub wasn't actually set up However, if the user's commandline sets up the gdbstub but tells QEMU to start rather than waiting for a GDB to connect (eg using '-s' but not '-S'), then we will have gdbserver_state.init true but no actual connection; an attempt to use gdb syscalls will then crash because we try to use gdbserver_state.c_cpu when it hasn't been set up: #0 0x00007ffff6803ba8 in qemu_cpu_kick (cpu=0x0) at ../../softmmu/cpus.c:457 #1 0x00007ffff6c03913 in gdb_do_syscallv (cb=0x7ffff6c19944 <common_semi_cb>, fmt=0x7ffff7573b7e "", va=0x7ffff56294c0) at ../../gdbstub.c:2946 #2 0x00007ffff6c19c3a in common_semi_gdb_syscall (cs=0x7ffff83fe060, cb=0x7ffff6c19944 <common_semi_cb>, fmt=0x7ffff7573b75 "isatty,%x") at ../../semihosting/arm-compat-semi.c:494 #3 0x00007ffff6c1a064 in gdb_isattyfn (cs=0x7ffff83fe060, gf=0x7ffff86a3690) at ../../semihosting/arm-compat-semi.c:636 #4 0x00007ffff6c1b20f in do_common_semihosting (cs=0x7ffff83fe060) at ../../semihosting/arm-compat-semi.c:967 #5 0x00007ffff693a037 in handle_semihosting (cs=0x7ffff83fe060) at ../../target/arm/helper.c:10316 You can probably also get into this state via some odd corner cases involving connecting a GDB and then telling it to detach from all the vCPUs. Abstract out the test into a new gdb_attached() function which returns true only if there's actually a GDB connected to the debug stub and attached to at least one vCPU. Reported-by: Liviu Ionescu <ilg@livius.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220526190053.521505-2-peter.maydell@linaro.org --- gdbstub.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/gdbstub.c b/gdbstub.c index XXXXXXX..XXXXXXX 100644 --- a/gdbstub.c +++ b/gdbstub.c @@ -XXX,XX +XXX,XX @@ static int get_char(void) } #endif +/* + * Return true if there is a GDB currently connected to the stub + * and attached to a CPU + */ +static bool gdb_attached(void) +{ + return gdbserver_state.init && gdbserver_state.c_cpu; +} + static enum { GDB_SYS_UNKNOWN, GDB_SYS_ENABLED, @@ -XXX,XX +XXX,XX @@ int use_gdb_syscalls(void) /* -semihosting-config target=auto */ /* On the first call check if gdb is connected and remember. */ if (gdb_syscall_mode == GDB_SYS_UNKNOWN) { - gdb_syscall_mode = gdbserver_state.init ? - GDB_SYS_ENABLED : GDB_SYS_DISABLED; + gdb_syscall_mode = gdb_attached() ? GDB_SYS_ENABLED : GDB_SYS_DISABLED; } return gdb_syscall_mode == GDB_SYS_ENABLED; } @@ -XXX,XX +XXX,XX @@ void gdb_do_syscallv(gdb_syscall_complete_cb cb, const char *fmt, va_list va) target_ulong addr; uint64_t i64; - if (!gdbserver_state.init) { + if (!gdb_attached()) { return; } -- 2.25.1 Currently we mishandle the --semihosting-config option if the user specifies it on the command line more than once. For example with: --semihosting-config target=gdb --semihosting-config arg=foo,arg=bar the function qemu_semihosting_config_options() is called twice, once for each argument. But that function expects to be called only once, and it always unconditionally sets the semihosting.enabled, semihost_chardev and semihosting.target variables. This means that if any of those options were set anywhere except the last --semihosting-config option on the command line, those settings are ignored. In the example above, 'target=gdb' in the first option is overridden by an implied default 'target=auto' in the second. The QemuOptsList machinery has a flag for handling this kind of "option group is setting global state": by setting .merge_lists = true; we make the machinery merge all the --semihosting-config arguments the user passes into a single set of options and call our qemu_semihosting_config_options() just once. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20220526190053.521505-3-peter.maydell@linaro.org --- semihosting/config.c | 1 + 1 file changed, 1 insertion(+) diff --git a/semihosting/config.c b/semihosting/config.c index XXXXXXX..XXXXXXX 100644 --- a/semihosting/config.c +++ b/semihosting/config.c @@ -XXX,XX +XXX,XX @@ QemuOptsList qemu_semihosting_config_opts = { .name = "semihosting-config", + .merge_lists = true, .implied_opt_name = "enable", .head = QTAILQ_HEAD_INITIALIZER(qemu_semihosting_config_opts.head), .desc = { -- 2.25.1 Hi; here's the latest round of arm patches. I have included also my patchset for the RTC devices to avoid keeping time_t and time_t diffs in 32-bit variables. thanks -- PMM The following changes since commit 156618d9ea67f2f2e31d9dedd97f2dcccbe6808c: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-08-30 09:20:27 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230831 for you to fetch changes up to e73b8bb8a3e9a162f70e9ffbf922d4fafc96bbfb: hw/arm: Set number of MPU regions correctly for an505, an521, an524 (2023-08-31 11:07:02 +0100) ---------------------------------------------------------------- target-arm queue: * Some of the preliminary patches for Cortex-A710 support * i.MX7 and i.MX6UL refactoring * Implement SRC device for i.MX7 * Catch illegal-exception-return from EL3 with bad NSE/NS * Use 64-bit offsets for holding time_t differences in RTC devices * Model correct number of MPU regions for an505, an521, an524 boards ---------------------------------------------------------------- Alex Bennée (1): target/arm: properly document FEAT_CRC32 Jean-Christophe Dubois (6): Remove i.MX7 IOMUX GPR device from i.MX6UL Refactor i.MX6UL processor code Add i.MX6UL missing devices. Refactor i.MX7 processor code Add i.MX7 missing TZ devices and memory regions Add i.MX7 SRC device implementation Peter Maydell (8): target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm() hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference rtc: Use time_t for passing and returning time offsets target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties hw/arm: Set number of MPU regions correctly for an505, an521, an524 Richard Henderson (9): target/arm: Reduce dcz_blocksize to uint8_t target/arm: Allow cpu to configure GM blocksize target/arm: Support more GM blocksizes target/arm: When tag memory is not present, set MTE=1 target/arm: Introduce make_ccsidr64 target/arm: Apply access checks to neoverse-n1 special registers target/arm: Apply access checks to neoverse-v1 special registers target/arm: Suppress FEAT_TRBE (Trace Buffer Extension) target/arm: Implement FEAT_HPDS2 as a no-op docs/system/arm/emulation.rst | 2 + include/hw/arm/armsse.h | 5 + include/hw/arm/armv7m.h | 8 + include/hw/arm/fsl-imx6ul.h | 158 ++++++++++++++++--- include/hw/arm/fsl-imx7.h | 338 ++++++++++++++++++++++++++++++----------- include/hw/misc/imx7_src.h | 66 ++++++++ include/hw/rtc/aspeed_rtc.h | 2 +- include/sysemu/rtc.h | 4 +- target/arm/cpregs.h | 2 + target/arm/cpu.h | 5 +- target/arm/internals.h | 6 - target/arm/tcg/translate.h | 2 + hw/arm/armsse.c | 16 ++ hw/arm/armv7m.c | 21 +++ hw/arm/fsl-imx6ul.c | 174 +++++++++++++-------- hw/arm/fsl-imx7.c | 201 +++++++++++++++++++----- hw/arm/mps2-tz.c | 29 ++++ hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++ hw/rtc/aspeed_rtc.c | 5 +- hw/rtc/m48t59.c | 2 +- hw/rtc/twl92230.c | 4 +- softmmu/rtc.c | 4 +- target/arm/cpu.c | 207 ++++++++++++++----------- target/arm/helper.c | 15 +- target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 102 +++++++++---- target/arm/tcg/helper-a64.c | 9 ++ target/arm/tcg/mte_helper.c | 90 ++++++++--- target/arm/tcg/translate-a64.c | 5 +- hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 31 files changed, 1393 insertions(+), 372 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c From: Richard Henderson <richard.henderson@linaro.org> This value is only 4 bits wide. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230811214031.171020-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool prop_lpa2; /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ - uint32_t dcz_blocksize; + uint8_t dcz_blocksize; + uint64_t rvbar_prop; /* Property/input signals. */ /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we hard-coded the blocksize with GMID_EL1_BS. But the value we choose for -cpu max does not match the value that cortex-a710 uses. Mirror the way we handle dcz_blocksize. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230811214031.171020-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 6 ----- target/arm/tcg/translate.h | 2 ++ target/arm/helper.c | 11 +++++--- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/mte_helper.c | 46 ++++++++++++++++++++++------------ target/arm/tcg/translate-a64.c | 5 ++-- 7 files changed, 45 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint8_t dcz_blocksize; + /* GM blocksize, in log_2(words), ie low 4 bits of GMID_EL0 */ + uint8_t gm_blocksize; uint64_t rvbar_prop; /* Property/input signals. */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs); #endif /* !CONFIG_USER_ONLY */ -/* - * The log2 of the words in the tag block, for GMID_EL1.BS. - * The is the maximum, 256 bytes, which manipulates 64-bits of tags. - */ -#define GMID_EL1_BS 6 - /* * SVE predicates are 1/8 the size of SVE vectors, and cannot use * the same simd_desc() encoding due to restrictions on size. diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.h +++ b/target/arm/tcg/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int8_t btype; /* A copy of cpu->dcz_blocksize. */ uint8_t dcz_blocksize; + /* A copy of cpu->gm_blocksize. */ + uint8_t gm_blocksize; /* True if this page is guarded. */ bool guarded_page; /* Bottom two bits of XScale c15_cpar coprocessor access control reg */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, .access = PL1_RW, .accessfn = access_mte, .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, - { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, - .access = PL1_R, .accessfn = access_aa64_tid5, - .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, { .name = "TCO", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, .type = ARM_CP_NO_RAW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * then define only a RAZ/WI version of PSTATE.TCO. */ if (cpu_isar_feature(aa64_mte, cpu)) { + ARMCPRegInfo gmid_reginfo = { + .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL1_R, .accessfn = access_aa64_tid5, + .type = ARM_CP_CONST, .resetvalue = cpu->gm_blocksize, + }; + define_one_arm_cp_reg(cpu, &gmid_reginfo); define_arm_cp_regs(cpu, mte_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + cpu->gm_blocksize = 6; /* 256 bytes */ cpu->sve_vq.supported = MAKE_64BIT_MASK(0, ARM_MAX_VQ); cpu->sme_vq.supported = SVE_VQ_POW2_MAP; diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(st2g_stub)(CPUARMState *env, uint64_t ptr) } } -#define LDGM_STGM_SIZE (4 << GMID_EL1_BS) - uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_LOAD, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* The tag is squashed to zero if the page does not support tags. */ if (!tag_mem) { return 0; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are loading 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - return ldq_le_p(tag_mem); + switch (gm_bs) { + case 6: + /* 256 bytes -> 16 tags -> 64 result bits */ + return ldq_le_p(tag_mem); + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_STORE, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* * Tag store only happens if the page support tags, @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are storing 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - stq_le_p(tag_mem, val); + switch (gm_bs) { + case 6: + stq_le_p(tag_mem, val); + break; + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STGM(DisasContext *s, arg_ldst_tag *a) gen_helper_stgm(cpu_env, addr, tcg_rt); } else { MMUAccessType acc = MMU_DATA_STORE; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static bool trans_LDGM(DisasContext *s, arg_ldst_tag *a) gen_helper_ldgm(tcg_rt, cpu_env, addr); } else { MMUAccessType acc = MMU_DATA_LOAD; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->cp_regs = arm_cpu->cp_regs; dc->features = env->features; dc->dcz_blocksize = arm_cpu->dcz_blocksize; + dc->gm_blocksize = arm_cpu->gm_blocksize; #ifdef CONFIG_USER_ONLY /* In sve_probe_page, we assume TBI is enabled. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Support all of the easy GM block sizes. Use direct memory operations, since the pointers are aligned. While BS=2 (16 bytes, 1 tag) is a legal setting, that requires an atomic store of one nibble. This is not difficult, but there is also no point in supporting it until required. Note that cortex-a710 sets GM blocksize to match its cacheline size of 64 bytes. I expect many implementations will also match the cacheline, which makes 16 bytes very unlikely. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 18 +++++++++--- target/arm/tcg/mte_helper.c | 56 +++++++++++++++++++++++++++++++------ 2 files changed, 62 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) ID_PFR1, VIRTUALIZATION, 0); } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* + * The architectural range of GM blocksize is 2-6, however qemu + * doesn't support blocksize of 2 (see HELPER(ldgm)). + */ + if (tcg_enabled()) { + assert(cpu->gm_blocksize >= 3 && cpu->gm_blocksize <= 6); + } + #ifndef CONFIG_USER_ONLY - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) { /* * Disable the MTE feature bits if we do not have tag-memory * provided by the machine. */ - cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); - } + if (cpu->tag_memory == NULL) { + cpu->isar.id_aa64pfr1 = + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + } #endif + } if (tcg_enabled()) { /* diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + uint64_t ret; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) /* * The ordering of elements within the word corresponds to - * a little-endian operation. + * a little-endian operation. Computation of shift comes from + * + * index = address<LOG2_TAG_GRANULE+3:LOG2_TAG_GRANULE> + * data<index*4+3:index*4> = tag + * + * Because of the alignment of ptr above, BS=6 has shift=0. + * All memory operations are aligned. Defer support for BS=2, + * requiring insertion or extraction of a nibble, until we + * support a cpu that requires it. */ switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + ret = *(uint8_t *)tag_mem; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + ret = cpu_to_le16(*(uint16_t *)tag_mem); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + ret = cpu_to_le32(*(uint32_t *)tag_mem); + break; case 6: /* 256 bytes -> 16 tags -> 64 result bits */ - return ldq_le_p(tag_mem); + return cpu_to_le64(*(uint64_t *)tag_mem); default: - /* cpu configured with unsupported gm blocksize. */ + /* + * CPU configured with unsupported/invalid gm blocksize. + * This is detected early in arm_cpu_realizefn. + */ g_assert_not_reached(); } + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + return ret << shift; } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - /* - * The ordering of elements within the word corresponds to - * a little-endian operation. - */ + /* See LDGM for comments on BS and on shift. */ + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + val >>= shift; switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + *(uint8_t *)tag_mem = val; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + *(uint16_t *)tag_mem = cpu_to_le16(val); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + *(uint32_t *)tag_mem = cpu_to_le32(val); + break; case 6: - stq_le_p(tag_mem, val); + /* 256 bytes -> 16 tags -> 64 result bits */ + *(uint64_t *)tag_mem = cpu_to_le64(val); break; default: /* cpu configured with unsupported gm blocksize. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When the cpu support MTE, but the system does not, reduce cpu support to user instructions at EL0 instead of completely disabling MTE. If we encounter a cpu implementation which does something else, we can revisit this setting. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) #ifndef CONFIG_USER_ONLY /* - * Disable the MTE feature bits if we do not have tag-memory - * provided by the machine. + * If we do not have tag-memory provided by the machine, + * reduce MTE support to instructions enabled at EL0. + * This matches Cortex-A710 BROADCASTMTE input being LOW. */ if (cpu->tag_memory == NULL) { cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 1); } #endif } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Do not hard-code the constants for Neoverse V1. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 48 ++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" +#include "qemu/units.h" #include "internals.h" #include "cpregs.h" +static uint64_t make_ccsidr64(unsigned assoc, unsigned linesize, + unsigned cachesize) +{ + unsigned lg_linesize = ctz32(linesize); + unsigned sets; + + /* + * The 64-bit CCSIDR_EL1 format is: + * [55:32] number of sets - 1 + * [23:3] associativity - 1 + * [2:0] log2(linesize) - 4 + * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc + */ + assert(assoc != 0); + assert(is_power_of_2(linesize)); + assert(lg_linesize >= 4 && lg_linesize <= 7 + 4); + + /* sets * associativity * linesize == cachesize. */ + sets = cachesize / (assoc * linesize); + assert(cachesize % (assoc * linesize) == 0); + + return ((uint64_t)(sets - 1) << 32) + | ((assoc - 1) << 3) + | (lg_linesize - 4); +} + static void aarch64_a35_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_neoverse_v1_initfn(Object *obj) * The Neoverse-V1 r1p2 TRM lists 32-bit format CCSIDR_EL1 values, * but also says it implements CCIDX, which means they should be * 64-bit format. So we here use values which are based on the textual - * information in chapter 2 of the TRM (and on the fact that - * sets * associativity * linesize == cachesize). - * - * The 64-bit CCSIDR_EL1 format is: - * [55:32] number of sets - 1 - * [23:3] associativity - 1 - * [2:0] log2(linesize) - 4 - * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc - * - * L1: 4-way set associative 64-byte line size, total size 64K, - * so sets is 256. + * information in chapter 2 of the TRM: * + * L1: 4-way set associative 64-byte line size, total size 64K. * L2: 8-way set associative, 64 byte line size, either 512K or 1MB. - * We pick 1MB, so this has 2048 sets. - * * L3: No L3 (this matches the CLIDR_EL1 value). */ - cpu->ccsidr[0] = 0x000000ff0000001aull; /* 64KB L1 dcache */ - cpu->ccsidr[1] = 0x000000ff0000001aull; /* 64KB L1 icache */ - cpu->ccsidr[2] = 0x000007ff0000003aull; /* 1MB L2 cache */ + cpu->ccsidr[0] = make_ccsidr64(4, 64, 64 * KiB); /* L1 dcache */ + cpu->ccsidr[1] = cpu->ccsidr[0]; /* L1 icache */ + cpu->ccsidr[2] = make_ccsidr64(8, 64, 1 * MiB); /* L2 cache */ /* From 3.2.115 SCTLR_EL3 */ cpu->reset_sctlr = 0x30c50838; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Access to many of the special registers is enabled or disabled by ACTLR_EL[23], which we implement as constant 0, which means that all writes outside EL3 should trap. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 2 ++ target/arm/helper.c | 4 ++-- target/arm/tcg/cpu64.c | 46 +++++++++++++++++++++++++++++++++--------- 3 files changed, 41 insertions(+), 11 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +CPAccessResult access_tvm_trvm(CPUARMState *, const ARMCPRegInfo *, bool); + #endif /* TARGET_ARM_CPREGS_H */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, } /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ -static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) +CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) { if (arm_current_el(env) == 1) { uint64_t trap = isread ? HCR_TRVM : HCR_TVM; diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a64fx_initfn(Object *obj) /* TODO: Add A64FX specific HPC extension registers */ } +static CPAccessResult access_actlr_w(CPUARMState *env, const ARMCPRegInfo *r, + bool read) +{ + if (!read) { + int el = arm_current_el(env); + + /* Because ACTLR_EL2 is constant 0, writes below EL2 trap to EL2. */ + if (el < 2 && arm_is_el2_enabled(env)) { + return CP_ACCESS_TRAP_EL2; + } + /* Because ACTLR_EL3 is constant 0, writes below EL3 trap to EL3. */ + if (el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + return CP_ACCESS_TRAP_EL3; + } + } + return CP_ACCESS_OK; +} + static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { { .name = "ATCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 7, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + /* Traps and enables are the same as for TCR_EL1. */ + .accessfn = access_tvm_trvm, .fgt = FGT_TCR_EL1, }, { .name = "ATCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 15, .crm = 7, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR3_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, /* * Report CPUCFR_EL1.SCU as 1, as we do not implement the DSU * (and in particular its system registers). @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 4 }, { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 4, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010, + .accessfn = access_actlr_w }, { .name = "CPUPCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 8, .opc2 = 1, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUPWRCTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCDN_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCTL_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGF_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, }; static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> There is only one additional EL1 register modeled, which also needs to use access_actlr_w. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) static const ARMCPRegInfo neoverse_v1_cp_reginfo[] = { { .name = "CPUECTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 5, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUPPMCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 2, .opc2 = 0, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing external to the cpu, which is out of scope for QEMU. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* FEAT_SPE (Statistical Profiling Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, PMSVER, 0); + /* FEAT_TRBE (Trace Buffer Extension) */ + cpu->isar.id_aa64dfr0 = + FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEBUFFER, 0); /* FEAT_TRF (Self-hosted Trace Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEFILT, 0); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This feature allows the operating system to set TCR_ELx.HWU* to allow the implementation to use the PBHA bits from the block and page descriptors for for IMPLEMENTATION DEFINED purposes. Since QEMU has no need to use these bits, we may simply ignore them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HAFDBS (Hardware management of the access flag and dirty bit state) - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) +- FEAT_HPDS2 (Translation table page-based hardware attributes) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR1, HAFDBS, 2); /* FEAT_HAFDBS */ t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 3); /* FEAT_PAN3 */ t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> This is a mandatory feature for Armv8.1 architectures but we don't state the feature clearly in our emulation list. Also include FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org Cc: qemu-stable@nongnu.org Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org> [PMM: pluralize 'instructions' in docs] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CRC32 (CRC32 instructions) - FEAT_CSV2 (Cache speculation variant 2) - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ - t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); /* FEAT_CRC32 */ t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> i.MX7 IOMUX GPR device is not equivalent to i.MX6UL IOMUXC GPR device. In particular, register 22 is not present on i.MX6UL and this is actualy The only register that is really emulated in the i.MX7 IOMUX GPR device. Note: The i.MX6UL code is actually also implementing the IOMUX GPR device as an unimplemented device at the same bus adress and the 2 instantiations were actualy colliding. So we go back to the unimplemented device for now. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 48681bf51ee97646479bb261bee19abebbc8074e.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 -- hw/arm/fsl-imx6ul.c | 11 ----------- 2 files changed, 13 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx6ul_ccm.h" #include "hw/misc/imx6_src.h" #include "hw/misc/imx7_snvs.h" -#include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX6SRCState src; IMX7SNVSState snvs; IMXGPCv2State gpcv2; - IMX7GPRState gpr; IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); - /* - * GPR - */ - object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); - /* * GPIOs 1 to 5 */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOGn_IRQ[i])); } - /* - * GPR - */ - sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); - /* * SDMA */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for most i.MX6UL devices in i.MX6UL header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: d579043fbd4e4b490370783fda43fc02c8e9be75.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 156 +++++++++++++++++++++++++++++++----- hw/arm/fsl-imx6ul.c | 147 ++++++++++++++++++++++----------- 2 files changed, 232 insertions(+), 71 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX6UL "fsl-imx6ul" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX6ULState, FSL_IMX6UL) @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_ADCS = 2, FSL_IMX6UL_NUM_USB_PHYS = 2, FSL_IMX6UL_NUM_USBS = 2, + FSL_IMX6UL_NUM_SAIS = 3, + FSL_IMX6UL_NUM_CANS = 2, + FSL_IMX6UL_NUM_PWMS = 4, }; struct FslIMX6ULState { @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { enum FslIMX6ULMemoryMap { FSL_IMX6UL_MMDC_ADDR = 0x80000000, - FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX6UL_MMDC_SIZE = (2 * GiB), FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, - FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, - FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, - FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, - FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_MEM_SIZE = (256 * MiB), - /* AIPS-2 */ + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_ALIAS_SIZE = (128 * MiB), + + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_EIM_CS_SIZE = (128 * MiB), + + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_AES_ENCRYPT_SIZE = (1 * MiB), + + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_RX_SIZE = (32 * MiB), + + /* AIPS-2 Begin */ FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, FSL_IMX6UL_UART4_ADDR = 0x021F0000, FSL_IMX6UL_UART3_ADDR = 0x021EC000, FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_QSPI_SIZE = 0x500, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CTRL_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_CMP_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_SYS_CNT_RD_SIZE = (16 * KiB), + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_TZASC_SIZE = (16 * KiB), + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_PXP_SIZE = (16 * KiB), + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSI_SIZE = 0x100, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_CSU_SIZE = (16 * KiB), + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_OCOTP_CTRL_SIZE = (4 * KiB), + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_EIM_SIZE = 0x100, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_MMDC_CFG_SIZE = (4 * KiB), + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_ROMCP_SIZE = 0x300, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, FSL_IMX6UL_I2C2_ADDR = 0x021A4000, FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_ADCn_SIZE = 0x100, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, FSL_IMX6UL_USDHC1_ADDR = 0x02190000, - FSL_IMX6UL_SIM1_ADDR = 0x0218C000, - FSL_IMX6UL_ENET1_ADDR = 0x02188000, - FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, - FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, - FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, - FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, - FSL_IMX6UL_CAAM_ADDR = 0x02140000, - FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, - /* AIPS-1 */ + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_SIMn_SIZE = (16 * KiB), + + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB1_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_USB2_ADDR = 0x02184200, + + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_USBO2_PL301_SIZE = (16 * KiB), + + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_AIPS2_CFG_SIZE = 0x100, + + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_CAAM_SIZE = (16 * KiB), + + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + FSL_IMX6UL_A7MPCORE_DAP_SIZE = (4 * KiB), + /* AIPS-2 End */ + + /* AIPS-1 Begin */ FSL_IMX6UL_PWM8_ADDR = 0x020FC000, FSL_IMX6UL_PWM7_ADDR = 0x020F8000, FSL_IMX6UL_PWM6_ADDR = 0x020F4000, FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_SDMA_SIZE = 0x300, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_GPR_SIZE = 0x40, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_IOMUXC_SIZE = 0x700, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_USBPHY2_ADDR = 0x020CA000, - FSL_IMX6UL_USBPHY2_SIZE = (4 * 1024), FSL_IMX6UL_USBPHY1_ADDR = 0x020C9000, - FSL_IMX6UL_USBPHY1_SIZE = (4 * 1024), + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_ANALOG_SIZE = 0x300, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_KPP_SIZE = 0x10, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_SNVS_LP_SIZE = (16 * KiB), + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_CANn_SIZE = (4 * KiB), + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, FSL_IMX6UL_PWM3_ADDR = 0x02088000, FSL_IMX6UL_PWM2_ADDR = 0x02084000, FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_PWMn_SIZE = 0x20, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_AIPS1_CFG_SIZE = (16 * KiB), + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_BEE_SIZE = (16 * KiB), + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_TOUCH_CTRL_SIZE = 0x100, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_SPBA_SIZE = 0x100, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_ASRC_SIZE = 0x100, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, FSL_IMX6UL_SAI2_ADDR = 0x0202C000, FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_SAIn_SIZE = 0x200, + FSL_IMX6UL_UART8_ADDR = 0x02024000, FSL_IMX6UL_UART1_ADDR = 0x02020000, FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + FSL_IMX6UL_SPDIF_SIZE = 0x100, + /* AIPS-1 End */ + + FSL_IMX6UL_BCH_ADDR = 0x01808000, + FSL_IMX6UL_BCH_SIZE = 0x200, + + FSL_IMX6UL_GPMI_ADDR = 0x01806000, + FSL_IMX6UL_GPMI_SIZE = 0x200, FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, - FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + FSL_IMX6UL_APBH_DMA_SIZE = (4 * KiB), FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, - FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = (384 * KiB), + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, - FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_OCRAM_MEM_SIZE = (128 * KiB), + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, - FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_CAAM_MEM_SIZE = (32 * KiB), + FSL_IMX6UL_ROM_ADDR = 0x00000000, - FSL_IMX6UL_ROM_SIZE = 0x00018000, + FSL_IMX6UL_ROM_SIZE = (96 * KiB), }; enum FslIMX6ULIRQs { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * GPIOs 1 to 5 + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { snprintf(name, NAME_SIZE, "epit%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * eCSPI + * eCSPIs */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { snprintf(name, NAME_SIZE, "usbphy%d", i); object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); } + + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX6UL_A7MPCORE_DAP_SIZE); /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * GPIO + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * IOMUXC and IOMUXC_GPR + * IOMUXC */ - for (i = 0; i < 1; i++) { - static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { - FSL_IMX6UL_IOMUXC_ADDR, - FSL_IMX6UL_IOMUXC_GPR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); - } + create_unimplemented_device("iomuxc", FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_gpr", FSL_IMX6UL_IOMUXC_GPR_ADDR, + FSL_IMX6UL_IOMUXC_GPR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { FSL_IMX6UL_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENETn_TIMER_IRQ[i])); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { + static const hwaddr + FSL_IMX6UL_USB_PHYn_ADDR[FSL_IMX6UL_NUM_USB_PHYS] = { + FSL_IMX6UL_USBPHY1_ADDR, + FSL_IMX6UL_USBPHY2_ADDR, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, - FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000); + FSL_IMX6UL_USB_PHYn_ADDR[i]); } + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { + static const hwaddr FSL_IMX6UL_USB02_USBn_ADDR[FSL_IMX6UL_NUM_USBS] = { + FSL_IMX6UL_USBO2_USB1_ADDR, + FSL_IMX6UL_USBO2_USB2_ADDR, + }; + static const int FSL_IMX6UL_USBn_IRQ[] = { FSL_IMX6UL_USB1_IRQ, FSL_IMX6UL_USB2_IRQ, }; + sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, - FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200); + FSL_IMX6UL_USB02_USBn_ADDR[i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX6UL_USBn_IRQ[i])); } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { FSL_IMX6UL_WDOG1_IRQ, FSL_IMX6UL_WDOG2_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * SDMA */ - create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, + FSL_IMX6UL_SDMA_SIZE); /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000); - create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000); - create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_SAIS; i++) { + static const hwaddr FSL_IMX6UL_SAIn_ADDR[FSL_IMX6UL_NUM_SAIS] = { + FSL_IMX6UL_SAI1_ADDR, + FSL_IMX6UL_SAI2_ADDR, + FSL_IMX6UL_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX6UL_SAIn_ADDR[i], + FSL_IMX6UL_SAIn_SIZE); + } /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000); - create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000); - create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000); - create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_PWMS; i++) { + static const hwaddr FSL_IMX6UL_PWMn_ADDR[FSL_IMX6UL_NUM_PWMS] = { + FSL_IMX6UL_PWM1_ADDR, + FSL_IMX6UL_PWM2_ADDR, + FSL_IMX6UL_PWM3_ADDR, + FSL_IMX6UL_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX6UL_PWMn_ADDR[i], + FSL_IMX6UL_PWMn_SIZE); + } /* * Audio ASRC (asynchronous sample rate converter) */ - create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000); + create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, + FSL_IMX6UL_ASRC_SIZE); /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000); - create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_CANS; i++) { + static const hwaddr FSL_IMX6UL_CANn_ADDR[FSL_IMX6UL_NUM_CANS] = { + FSL_IMX6UL_CAN1_ADDR, + FSL_IMX6UL_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX6UL_CANn_ADDR[i], + FSL_IMX6UL_CANn_SIZE); + } /* * APHB_DMA @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) }; snprintf(name, NAME_SIZE, "adc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], + FSL_IMX6UL_ADCn_SIZE); } /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, + FSL_IMX6UL_LCDIF_SIZE); /* * ROM memory -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add 4 missing PWM devices Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 59e4dc56e14eccfefd379275ec19048dff9c10b3.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 +- hw/arm/fsl-imx6ul.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_USBS = 2, FSL_IMX6UL_NUM_SAIS = 3, FSL_IMX6UL_NUM_CANS = 2, - FSL_IMX6UL_NUM_PWMS = 4, + FSL_IMX6UL_NUM_PWMS = 8, }; struct FslIMX6ULState { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_PWM2_ADDR, FSL_IMX6UL_PWM3_ADDR, FSL_IMX6UL_PWM4_ADDR, + FSL_IMX6UL_PWM5_ADDR, + FSL_IMX6UL_PWM6_ADDR, + FSL_IMX6UL_PWM7_ADDR, + FSL_IMX6UL_PWM8_ADDR, }; snprintf(name, NAME_SIZE, "pwm%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, FSL_IMX6UL_LCDIF_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX6UL_CSU_ADDR, + FSL_IMX6UL_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX6UL_TZASC_ADDR, + FSL_IMX6UL_TZASC_SIZE); + /* * ROM memory */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for all i.MX7 devices in i.MX7 header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 59e195d33e4d486a8d131392acd46633c8c10ed7.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 330 ++++++++++++++++++++++++++++---------- hw/arm/fsl-imx7.c | 130 ++++++++++----- 2 files changed, 335 insertions(+), 125 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" -#include "hw/misc/imx6_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ #include "hw/usb/chipidea.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX7 "fsl-imx7" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX7State, FSL_IMX7) @@ -XXX,XX +XXX,XX @@ enum FslIMX7Configuration { FSL_IMX7_NUM_ECSPIS = 4, FSL_IMX7_NUM_USBS = 3, FSL_IMX7_NUM_ADCS = 2, + FSL_IMX7_NUM_SAIS = 3, + FSL_IMX7_NUM_CANS = 2, + FSL_IMX7_NUM_PWMS = 4, }; struct FslIMX7State { @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { enum FslIMX7MemoryMap { FSL_IMX7_MMDC_ADDR = 0x80000000, - FSL_IMX7_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX7_MMDC_SIZE = (2 * GiB), - FSL_IMX7_GPIO1_ADDR = 0x30200000, - FSL_IMX7_GPIO2_ADDR = 0x30210000, - FSL_IMX7_GPIO3_ADDR = 0x30220000, - FSL_IMX7_GPIO4_ADDR = 0x30230000, - FSL_IMX7_GPIO5_ADDR = 0x30240000, - FSL_IMX7_GPIO6_ADDR = 0x30250000, - FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX7_QSPI1_MEM_SIZE = (256 * MiB), - FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + FSL_IMX7_PCIE1_MEM_ADDR = 0x40000000, + FSL_IMX7_PCIE1_MEM_SIZE = (256 * MiB), - FSL_IMX7_WDOG1_ADDR = 0x30280000, - FSL_IMX7_WDOG2_ADDR = 0x30290000, - FSL_IMX7_WDOG3_ADDR = 0x302A0000, - FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_QSPI1_RX_BUF_ADDR = 0x34000000, + FSL_IMX7_QSPI1_RX_BUF_SIZE = (32 * MiB), - FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + /* PCIe Peripherals */ + FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_GPT1_ADDR = 0x302D0000, - FSL_IMX7_GPT2_ADDR = 0x302E0000, - FSL_IMX7_GPT3_ADDR = 0x302F0000, - FSL_IMX7_GPT4_ADDR = 0x30300000, + /* MMAP Peripherals */ + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x8000, - FSL_IMX7_IOMUXC_ADDR = 0x30330000, - FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, - FSL_IMX7_IOMUXCn_SIZE = 0x1000, + /* GPV configuration */ + FSL_IMX7_GPV6_ADDR = 0x32600000, + FSL_IMX7_GPV5_ADDR = 0x32500000, + FSL_IMX7_GPV4_ADDR = 0x32400000, + FSL_IMX7_GPV3_ADDR = 0x32300000, + FSL_IMX7_GPV2_ADDR = 0x32200000, + FSL_IMX7_GPV1_ADDR = 0x32100000, + FSL_IMX7_GPV0_ADDR = 0x32000000, + FSL_IMX7_GPVn_SIZE = (1 * MiB), - FSL_IMX7_OCOTP_ADDR = 0x30350000, - FSL_IMX7_OCOTP_SIZE = 0x10000, + /* Arm Peripherals */ + FSL_IMX7_A7MPCORE_ADDR = 0x31000000, - FSL_IMX7_ANALOG_ADDR = 0x30360000, - FSL_IMX7_SNVS_ADDR = 0x30370000, - FSL_IMX7_CCM_ADDR = 0x30380000, + /* AIPS-3 Begin */ - FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = 0x1000, + FSL_IMX7_ENET2_ADDR = 0x30BF0000, + FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ADC1_ADDR = 0x30610000, - FSL_IMX7_ADC2_ADDR = 0x30620000, - FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_SDMA_ADDR = 0x30BD0000, + FSL_IMX7_SDMA_SIZE = (4 * KiB), - FSL_IMX7_PWM1_ADDR = 0x30660000, - FSL_IMX7_PWM2_ADDR = 0x30670000, - FSL_IMX7_PWM3_ADDR = 0x30680000, - FSL_IMX7_PWM4_ADDR = 0x30690000, - FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_EIM_ADDR = 0x30BC0000, + FSL_IMX7_EIM_SIZE = (4 * KiB), - FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, - FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_QSPI_ADDR = 0x30BB0000, + FSL_IMX7_QSPI_SIZE = 0x8000, - FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_SIM2_ADDR = 0x30BA0000, + FSL_IMX7_SIM1_ADDR = 0x30B90000, + FSL_IMX7_SIMn_SIZE = (4 * KiB), + + FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_USDHC2_ADDR = 0x30B50000, + FSL_IMX7_USDHC1_ADDR = 0x30B40000, + + FSL_IMX7_USB3_ADDR = 0x30B30000, + FSL_IMX7_USBMISC3_ADDR = 0x30B30200, + FSL_IMX7_USB2_ADDR = 0x30B20000, + FSL_IMX7_USBMISC2_ADDR = 0x30B20200, + FSL_IMX7_USB1_ADDR = 0x30B10000, + FSL_IMX7_USBMISC1_ADDR = 0x30B10200, + FSL_IMX7_USBMISCn_SIZE = 0x200, + + FSL_IMX7_USB_PL301_ADDR = 0x30AD0000, + FSL_IMX7_USB_PL301_SIZE = (64 * KiB), + + FSL_IMX7_SEMAPHORE_HS_ADDR = 0x30AC0000, + FSL_IMX7_SEMAPHORE_HS_SIZE = (64 * KiB), + + FSL_IMX7_MUB_ADDR = 0x30AB0000, + FSL_IMX7_MUA_ADDR = 0x30AA0000, + FSL_IMX7_MUn_SIZE = (KiB), + + FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART6_ADDR = 0x30A80000, + FSL_IMX7_UART5_ADDR = 0x30A70000, + FSL_IMX7_UART4_ADDR = 0x30A60000, + + FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_I2C3_ADDR = 0x30A40000, + FSL_IMX7_I2C2_ADDR = 0x30A30000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, + + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CANn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS3_CONF_ADDR = 0x309F0000, + FSL_IMX7_AIPS3_CONF_SIZE = (64 * KiB), FSL_IMX7_CAAM_ADDR = 0x30900000, - FSL_IMX7_CAAM_SIZE = 0x40000, + FSL_IMX7_CAAM_SIZE = (256 * KiB), - FSL_IMX7_CAN1_ADDR = 0x30A00000, - FSL_IMX7_CAN2_ADDR = 0x30A10000, - FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_SPBA_ADDR = 0x308F0000, + FSL_IMX7_SPBA_SIZE = (4 * KiB), - FSL_IMX7_I2C1_ADDR = 0x30A20000, - FSL_IMX7_I2C2_ADDR = 0x30A30000, - FSL_IMX7_I2C3_ADDR = 0x30A40000, - FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_SAI3_ADDR = 0x308C0000, + FSL_IMX7_SAI2_ADDR = 0x308B0000, + FSL_IMX7_SAI1_ADDR = 0x308A0000, + FSL_IMX7_SAIn_SIZE = (4 * KiB), - FSL_IMX7_ECSPI1_ADDR = 0x30820000, - FSL_IMX7_ECSPI2_ADDR = 0x30830000, - FSL_IMX7_ECSPI3_ADDR = 0x30840000, - FSL_IMX7_ECSPI4_ADDR = 0x30630000, - - FSL_IMX7_LCDIF_ADDR = 0x30730000, - FSL_IMX7_LCDIF_SIZE = 0x1000, - - FSL_IMX7_UART1_ADDR = 0x30860000, + FSL_IMX7_UART3_ADDR = 0x30880000, /* * Some versions of the reference manual claim that UART2 is @ * 0x30870000, but experiments with HW + DT files in upstream @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { * actually located @ 0x30890000 */ FSL_IMX7_UART2_ADDR = 0x30890000, - FSL_IMX7_UART3_ADDR = 0x30880000, - FSL_IMX7_UART4_ADDR = 0x30A60000, - FSL_IMX7_UART5_ADDR = 0x30A70000, - FSL_IMX7_UART6_ADDR = 0x30A80000, - FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART1_ADDR = 0x30860000, - FSL_IMX7_SAI1_ADDR = 0x308A0000, - FSL_IMX7_SAI2_ADDR = 0x308B0000, - FSL_IMX7_SAI3_ADDR = 0x308C0000, - FSL_IMX7_SAIn_SIZE = 0x10000, + FSL_IMX7_ECSPI3_ADDR = 0x30840000, + FSL_IMX7_ECSPI2_ADDR = 0x30830000, + FSL_IMX7_ECSPI1_ADDR = 0x30820000, + FSL_IMX7_ECSPIn_SIZE = (4 * KiB), - FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ENET2_ADDR = 0x30BF0000, + /* AIPS-3 End */ - FSL_IMX7_USB1_ADDR = 0x30B10000, - FSL_IMX7_USBMISC1_ADDR = 0x30B10200, - FSL_IMX7_USB2_ADDR = 0x30B20000, - FSL_IMX7_USBMISC2_ADDR = 0x30B20200, - FSL_IMX7_USB3_ADDR = 0x30B30000, - FSL_IMX7_USBMISC3_ADDR = 0x30B30200, - FSL_IMX7_USBMISCn_SIZE = 0x200, + /* AIPS-2 Begin */ - FSL_IMX7_USDHC1_ADDR = 0x30B40000, - FSL_IMX7_USDHC2_ADDR = 0x30B50000, - FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_AXI_DEBUG_MON_ADDR = 0x307E0000, + FSL_IMX7_AXI_DEBUG_MON_SIZE = (64 * KiB), - FSL_IMX7_SDMA_ADDR = 0x30BD0000, - FSL_IMX7_SDMA_SIZE = 0x1000, + FSL_IMX7_PERFMON2_ADDR = 0x307D0000, + FSL_IMX7_PERFMON1_ADDR = 0x307C0000, + FSL_IMX7_PERFMONn_SIZE = (64 * KiB), + + FSL_IMX7_DDRC_ADDR = 0x307A0000, + FSL_IMX7_DDRC_SIZE = (4 * KiB), + + FSL_IMX7_DDRC_PHY_ADDR = 0x30790000, + FSL_IMX7_DDRC_PHY_SIZE = (4 * KiB), + + FSL_IMX7_TZASC_ADDR = 0x30780000, + FSL_IMX7_TZASC_SIZE = (64 * KiB), + + FSL_IMX7_MIPI_DSI_ADDR = 0x30760000, + FSL_IMX7_MIPI_DSI_SIZE = (4 * KiB), + + FSL_IMX7_MIPI_CSI_ADDR = 0x30750000, + FSL_IMX7_MIPI_CSI_SIZE = 0x4000, + + FSL_IMX7_LCDIF_ADDR = 0x30730000, + FSL_IMX7_LCDIF_SIZE = 0x8000, + + FSL_IMX7_CSI_ADDR = 0x30710000, + FSL_IMX7_CSI_SIZE = (4 * KiB), + + FSL_IMX7_PXP_ADDR = 0x30700000, + FSL_IMX7_PXP_SIZE = 0x4000, + + FSL_IMX7_EPDC_ADDR = 0x306F0000, + FSL_IMX7_EPDC_SIZE = (4 * KiB), + + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = (4 * KiB), + + FSL_IMX7_SYSCNT_CTRL_ADDR = 0x306C0000, + FSL_IMX7_SYSCNT_CMP_ADDR = 0x306B0000, + FSL_IMX7_SYSCNT_RD_ADDR = 0x306A0000, + + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWMn_SIZE = (4 * KiB), + + FSL_IMX7_FlEXTIMER2_ADDR = 0x30650000, + FSL_IMX7_FlEXTIMER1_ADDR = 0x30640000, + FSL_IMX7_FLEXTIMERn_SIZE = (4 * KiB), + + FSL_IMX7_ECSPI4_ADDR = 0x30630000, + + FSL_IMX7_ADC2_ADDR = 0x30620000, + FSL_IMX7_ADC1_ADDR = 0x30610000, + FSL_IMX7_ADCn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS2_CONF_ADDR = 0x305F0000, + FSL_IMX7_AIPS2_CONF_SIZE = (64 * KiB), + + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + + FSL_IMX7_CSU_ADDR = 0x303E0000, + FSL_IMX7_CSU_SIZE = (64 * KiB), + + FSL_IMX7_RDC_ADDR = 0x303D0000, + FSL_IMX7_RDC_SIZE = (4 * KiB), + + FSL_IMX7_SEMAPHORE2_ADDR = 0x303C0000, + FSL_IMX7_SEMAPHORE1_ADDR = 0x303B0000, + FSL_IMX7_SEMAPHOREn_SIZE = (4 * KiB), + + FSL_IMX7_GPC_ADDR = 0x303A0000, + + FSL_IMX7_SRC_ADDR = 0x30390000, + FSL_IMX7_SRC_SIZE = (4 * KiB), + + FSL_IMX7_CCM_ADDR = 0x30380000, + + FSL_IMX7_SNVS_HP_ADDR = 0x30370000, + + FSL_IMX7_ANALOG_ADDR = 0x30360000, + + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + + FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, + FSL_IMX7_IOMUXC_GPR_SIZE = (4 * KiB), + + FSL_IMX7_IOMUXC_ADDR = 0x30330000, + FSL_IMX7_IOMUXC_SIZE = (4 * KiB), + + FSL_IMX7_KPP_ADDR = 0x30320000, + FSL_IMX7_KPP_SIZE = (4 * KiB), + + FSL_IMX7_ROMCP_ADDR = 0x30310000, + FSL_IMX7_ROMCP_SIZE = (4 * KiB), + + FSL_IMX7_GPT4_ADDR = 0x30300000, + FSL_IMX7_GPT3_ADDR = 0x302F0000, + FSL_IMX7_GPT2_ADDR = 0x302E0000, + FSL_IMX7_GPT1_ADDR = 0x302D0000, + + FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + FSL_IMX7_IOMUXC_LPSR_SIZE = (4 * KiB), + + FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_WDOG3_ADDR = 0x302A0000, + FSL_IMX7_WDOG2_ADDR = 0x30290000, + FSL_IMX7_WDOG1_ADDR = 0x30280000, + + FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + + FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_GPIO6_ADDR = 0x30250000, + FSL_IMX7_GPIO5_ADDR = 0x30240000, + FSL_IMX7_GPIO4_ADDR = 0x30230000, + FSL_IMX7_GPIO3_ADDR = 0x30220000, + FSL_IMX7_GPIO2_ADDR = 0x30210000, + FSL_IMX7_GPIO1_ADDR = 0x30200000, + + FSL_IMX7_AIPS1_CONF_ADDR = 0x301F0000, + FSL_IMX7_AIPS1_CONF_SIZE = (64 * KiB), - FSL_IMX7_A7MPCORE_ADDR = 0x31000000, FSL_IMX7_A7MPCORE_DAP_ADDR = 0x30000000, + FSL_IMX7_A7MPCORE_DAP_SIZE = (1 * MiB), - FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, + /* AIPS-1 End */ - FSL_IMX7_GPR_ADDR = 0x30340000, + FSL_IMX7_EIM_CS0_ADDR = 0x28000000, + FSL_IMX7_EIM_CS0_SIZE = (128 * MiB), - FSL_IMX7_DMA_APBH_ADDR = 0x33000000, - FSL_IMX7_DMA_APBH_SIZE = 0x2000, + FSL_IMX7_OCRAM_PXP_ADDR = 0x00940000, + FSL_IMX7_OCRAM_PXP_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_EPDC_ADDR = 0x00920000, + FSL_IMX7_OCRAM_EPDC_SIZE = (128 * KiB), + + FSL_IMX7_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX7_OCRAM_MEM_SIZE = (128 * KiB), + + FSL_IMX7_TCMU_ADDR = 0x00800000, + FSL_IMX7_TCMU_SIZE = (32 * KiB), + + FSL_IMX7_TCML_ADDR = 0x007F8000, + FSL_IMX7_TCML_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_S_ADDR = 0x00180000, + FSL_IMX7_OCRAM_S_SIZE = (32 * KiB), + + FSL_IMX7_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX7_CAAM_MEM_SIZE = (32 * KiB), + + FSL_IMX7_ROM_ADDR = 0x00000000, + FSL_IMX7_ROM_SIZE = (96 * KiB), }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) char name[NAME_SIZE]; int i; + /* + * CPUs + */ for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX7_NUM_CPUS); i++) { snprintf(name, NAME_SIZE, "cpu%d", i); object_initialize_child(obj, name, &s->cpu[i], @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) TYPE_A15MPCORE_PRIV); /* - * GPIOs 1 to 7 + * GPIOs */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } - + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); + /* + * PCIE + */ object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) return; } + /* + * CPUs + */ for (i = 0; i < smp_cpus; i++) { o = OBJECT(&s->cpu[i]); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX7_A7MPCORE_DAP_SIZE); /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPTn_IRQ[i])); } + /* + * GPIOs + */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = { FSL_IMX7_GPIO1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * IOMUXC and IOMUXC_LPSR */ - for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) { - static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = { - FSL_IMX7_IOMUXC_ADDR, - FSL_IMX7_IOMUXC_LPSR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i], - FSL_IMX7_IOMUXCn_SIZE); - } + create_unimplemented_device("iomuxc", FSL_IMX7_IOMUXC_ADDR, + FSL_IMX7_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_lspr", FSL_IMX7_IOMUXC_LPSR_ADDR, + FSL_IMX7_IOMUXC_LPSR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = { FSL_IMX7_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_SPIn_IRQ[i])); } + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = { FSL_IMX7_I2C1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * SNVS */ sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_HP_ADDR); /* * SRC @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_PWMS; i++) { + static const hwaddr FSL_IMX7_PWMn_ADDR[FSL_IMX7_NUM_PWMS] = { + FSL_IMX7_PWM1_ADDR, + FSL_IMX7_PWM2_ADDR, + FSL_IMX7_PWM3_ADDR, + FSL_IMX7_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX7_PWMn_ADDR[i], + FSL_IMX7_PWMn_SIZE); + } /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); - create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_CANS; i++) { + static const hwaddr FSL_IMX7_CANn_ADDR[FSL_IMX7_NUM_CANS] = { + FSL_IMX7_CAN1_ADDR, + FSL_IMX7_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX7_CANn_ADDR[i], + FSL_IMX7_CANn_SIZE); + } /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX7_SAI1_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI2_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI3_ADDR, FSL_IMX7_SAIn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_SAIS; i++) { + static const hwaddr FSL_IMX7_SAIn_ADDR[FSL_IMX7_NUM_SAIS] = { + FSL_IMX7_SAI1_ADDR, + FSL_IMX7_SAI2_ADDR, + FSL_IMX7_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX7_SAIn_ADDR[i], + FSL_IMX7_SAIn_SIZE); + } /* * OCOTP @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, FSL_IMX7_OCOTP_SIZE); + /* + * GPR + */ sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_IOMUXC_GPR_ADDR); + /* + * PCIE + */ sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ); sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq); - + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = { FSL_IMX7_USBMISC1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add various memory segments - OCRAM - OCRAM EPDC - OCRAM PXP - OCRAM S - ROM - CAAM Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: f887a3483996ba06d40bd62ffdfb0ecf68621987.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 7 +++++ hw/arm/fsl-imx7.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7GPRState gpr; ChipideaState usb[FSL_IMX7_NUM_USBS]; DesignwarePCIEHost pcie; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_epdc; + MemoryRegion ocram_pxp; + MemoryRegion ocram_s; + uint32_t phy_num[FSL_IMX7_NUM_ETHS]; bool phy_connected[FSL_IMX7_NUM_ETHS]; }; diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX7_CSU_ADDR, + FSL_IMX7_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX7_TZASC_ADDR, + FSL_IMX7_TZASC_SIZE); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx7.ocram", + FSL_IMX7_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * OCRAM EPDC memory + */ + memory_region_init_ram(&s->ocram_epdc, NULL, "imx7.ocram_epdc", + FSL_IMX7_OCRAM_EPDC_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_EPDC_ADDR, + &s->ocram_epdc); + + /* + * OCRAM PXP memory + */ + memory_region_init_ram(&s->ocram_pxp, NULL, "imx7.ocram_pxp", + FSL_IMX7_OCRAM_PXP_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_PXP_ADDR, + &s->ocram_pxp); + + /* + * OCRAM_S memory + */ + memory_region_init_ram(&s->ocram_s, NULL, "imx7.ocram_s", + FSL_IMX7_OCRAM_S_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_S_ADDR, + &s->ocram_s); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, OBJECT(dev), "imx7.rom", + FSL_IMX7_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, OBJECT(dev), "imx7.caam", + FSL_IMX7_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_CAAM_MEM_ADDR, + &s->caam); } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The SRC device is normally used to start the secondary CPU. When running Linux directly, QEMU is emulating a PSCI interface that UBOOT is installing at boot time and therefore the fact that the SRC device is unimplemented is hidden as Qemu respond directly to PSCI requets without using the SRC device. But if you try to run a more bare metal application (maybe uboot itself), then it is not possible to start the secondary CPU as the SRC is an unimplemented device. This patch adds the ability to start the secondary CPU through the SRC device so that you can use this feature in bare metal applications. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +- include/hw/misc/imx7_src.h | 66 +++++++++ hw/arm/fsl-imx7.c | 8 +- hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 6 files changed, 356 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" +#include "hw/misc/imx7_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7CCMState ccm; IMX7AnalogState analog; IMX7SNVSState snvs; + IMX7SRCState src; IMXGPCv2State gpcv2; IMXSPIState spi[FSL_IMX7_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX7_NUM_I2CS]; @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = (4 * KiB), FSL_IMX7_CCM_ADDR = 0x30380000, diff --git a/include/hw/misc/imx7_src.h b/include/hw/misc/imx7_src.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_src.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (C) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SRC_H +#define IMX7_SRC_H + +#include "hw/sysbus.h" +#include "qemu/bitops.h" +#include "qom/object.h" + +#define SRC_SCR 0 +#define SRC_A7RCR0 1 +#define SRC_A7RCR1 2 +#define SRC_M4RCR 3 +#define SRC_ERCR 5 +#define SRC_HSICPHY_RCR 7 +#define SRC_USBOPHY1_RCR 8 +#define SRC_USBOPHY2_RCR 9 +#define SRC_MPIPHY_RCR 10 +#define SRC_PCIEPHY_RCR 11 +#define SRC_SBMR1 22 +#define SRC_SRSR 23 +#define SRC_SISR 26 +#define SRC_SIMR 27 +#define SRC_SBMR2 28 +#define SRC_GPR1 29 +#define SRC_GPR2 30 +#define SRC_GPR3 31 +#define SRC_GPR4 32 +#define SRC_GPR5 33 +#define SRC_GPR6 34 +#define SRC_GPR7 35 +#define SRC_GPR8 36 +#define SRC_GPR9 37 +#define SRC_GPR10 38 +#define SRC_MAX 39 + +/* SRC_A7SCR1 */ +#define R_CORE1_ENABLE_SHIFT 1 +#define R_CORE1_ENABLE_LENGTH 1 +/* SRC_A7SCR0 */ +#define R_CORE1_RST_SHIFT 5 +#define R_CORE1_RST_LENGTH 1 +#define R_CORE0_RST_SHIFT 4 +#define R_CORE0_RST_LENGTH 1 + +#define TYPE_IMX7_SRC "imx7.src" +OBJECT_DECLARE_SIMPLE_TYPE(IMX7SRCState, IMX7_SRC) + +struct IMX7SRCState { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t regs[SRC_MAX]; +}; + +#endif /* IMX7_SRC_H */ diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * SRC + */ + object_initialize_child(obj, "src", &s->src, TYPE_IMX7_SRC); + /* * ECSPIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * SRC */ - create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX7_SRC_ADDR); /* * Watchdogs diff --git a/hw/misc/imx7_src.c b/hw/misc/imx7_src.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_src.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_src.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" +#include "qemu/module.h" +#include "target/arm/arm-powerctl.h" +#include "hw/core/cpu.h" +#include "hw/registerfields.h" + +#include "trace.h" + +static const char *imx7_src_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case SRC_SCR: + return "SRC_SCR"; + case SRC_A7RCR0: + return "SRC_A7RCR0"; + case SRC_A7RCR1: + return "SRC_A7RCR1"; + case SRC_M4RCR: + return "SRC_M4RCR"; + case SRC_ERCR: + return "SRC_ERCR"; + case SRC_HSICPHY_RCR: + return "SRC_HSICPHY_RCR"; + case SRC_USBOPHY1_RCR: + return "SRC_USBOPHY1_RCR"; + case SRC_USBOPHY2_RCR: + return "SRC_USBOPHY2_RCR"; + case SRC_PCIEPHY_RCR: + return "SRC_PCIEPHY_RCR"; + case SRC_SBMR1: + return "SRC_SBMR1"; + case SRC_SRSR: + return "SRC_SRSR"; + case SRC_SISR: + return "SRC_SISR"; + case SRC_SIMR: + return "SRC_SIMR"; + case SRC_SBMR2: + return "SRC_SBMR2"; + case SRC_GPR1: + return "SRC_GPR1"; + case SRC_GPR2: + return "SRC_GPR2"; + case SRC_GPR3: + return "SRC_GPR3"; + case SRC_GPR4: + return "SRC_GPR4"; + case SRC_GPR5: + return "SRC_GPR5"; + case SRC_GPR6: + return "SRC_GPR6"; + case SRC_GPR7: + return "SRC_GPR7"; + case SRC_GPR8: + return "SRC_GPR8"; + case SRC_GPR9: + return "SRC_GPR9"; + case SRC_GPR10: + return "SRC_GPR10"; + default: + sprintf(unknown, "%u ?", reg); + return unknown; + } +} + +static const VMStateDescription vmstate_imx7_src = { + .name = TYPE_IMX7_SRC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_src_reset(DeviceState *dev) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + /* Set reset values */ + s->regs[SRC_SCR] = 0xA0; + s->regs[SRC_SRSR] = 0x1; + s->regs[SRC_SIMR] = 0x1F; +} + +static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + + if (index < SRC_MAX) { + value = s->regs[index]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + } + + trace_imx7_src_read(imx7_src_reg_name(index), value); + + return value; +} + + +/* + * The reset is asynchronous so we need to defer clearing the reset + * bit until the work is completed. + */ + +struct SRCSCRResetInfo { + IMX7SRCState *s; + uint32_t reset_bit; +}; + +static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) +{ + struct SRCSCRResetInfo *ri = data.host_ptr; + IMX7SRCState *s = ri->s; + + assert(qemu_mutex_iothread_locked()); + + s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + g_free(ri); +} + +static void imx7_defer_clear_reset_bit(uint32_t cpuid, + IMX7SRCState *s, + uint32_t reset_shift) +{ + struct SRCSCRResetInfo *ri; + CPUState *cpu = arm_get_cpu_by_id(cpuid); + + if (!cpu) { + return; + } + + ri = g_new(struct SRCSCRResetInfo, 1); + ri->s = s; + ri->reset_bit = reset_shift; + + async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); +} + + +static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + long unsigned int change_mask; + uint32_t current_value = value; + + if (index >= SRC_MAX) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + return; + } + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + change_mask = s->regs[index] ^ (uint32_t)current_value; + + switch (index) { + case SRC_A7RCR0: + if (FIELD_EX32(change_mask, CORE0, RST)) { + arm_reset_cpu(0); + imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); + } + if (FIELD_EX32(change_mask, CORE1, RST)) { + arm_reset_cpu(1); + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + } + s->regs[index] = current_value; + break; + case SRC_A7RCR1: + /* + * On real hardware when the system reset controller starts a + * secondary CPU it runs through some boot ROM code which reads + * the SRC_GPRX registers controlling the start address and branches + * to it. + * Here we are taking a short cut and branching directly to the + * requested address (we don't want to run the boot ROM code inside + * QEMU) + */ + if (FIELD_EX32(change_mask, CORE1, ENABLE)) { + if (FIELD_EX32(current_value, CORE1, ENABLE)) { + /* CORE 1 is brought up */ + arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], + 3, false); + } else { + /* CORE 1 is shut down */ + arm_set_cpu_off(1); + } + /* We clear the reset bits as the processor changed state */ + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + clear_bit(R_CORE1_RST_SHIFT, &change_mask); + } + s->regs[index] = current_value; + break; + default: + s->regs[index] = current_value; + break; + } +} + +static const struct MemoryRegionOps imx7_src_ops = { + .read = imx7_src_read, + .write = imx7_src_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_src_realize(DeviceState *dev, Error **errp) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, + TYPE_IMX7_SRC, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); +} + +static void imx7_src_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx7_src_realize; + dc->reset = imx7_src_reset; + dc->vmsd = &vmstate_imx7_src; + dc->desc = "i.MX6 System Reset Controller"; +} + +static const TypeInfo imx7_src_info = { + .name = TYPE_IMX7_SRC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SRCState), + .class_init = imx7_src_class_init, +}; + +static void imx7_src_register_types(void) +{ + type_register_static(&imx7_src_info); +} + +type_init(imx7_src_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( 'imx6_src.c', 'imx6ul_ccm.c', 'imx7_ccm.c', + 'imx7_src.c', 'imx7_gpr.c', 'imx7_snvs.c', 'imx_ccm.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d" ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +# imx7_src.c +imx7_src_read(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +imx7_src_write(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 + # iotkit-sysinfo.c iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.34.1 The architecture requires (R_TYTWB) that an attempt to return from EL3 when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This enforces that the CPU can't ever be executing below EL3 with the NSE,NS bits indicating an invalid security state.) We were missing this check; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230807150618.101357-1-peter.maydell@linaro.org --- target/arm/tcg/helper-a64.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) spsr &= ~PSTATE_SS; } + /* + * FEAT_RME forbids return from EL3 with an invalid security state. + * We don't need an explicit check for FEAT_RME here because we enforce + * in scr_write() that you can't set the NSE bit without it. + */ + if (cur_el == 3 && (env->cp15.scr_el3 & (SCR_NS | SCR_NSE)) == SCR_NSE) { + goto illegal_return; + } + new_el = el_from_spsr(spsr); if (new_el == -1) { goto illegal_return; -- 2.34.1 In the m48t59 device we almost always use 64-bit arithmetic when dealing with time_t deltas. The one exception is in set_alarm(), which currently uses a plain 'int' to hold the difference between two time_t values. Switch to int64_t instead to avoid any possible overflow issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/m48t59.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/rtc/m48t59.c b/hw/rtc/m48t59.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/m48t59.c +++ b/hw/rtc/m48t59.c @@ -XXX,XX +XXX,XX @@ static void alarm_cb (void *opaque) static void set_alarm(M48t59State *NVRAM) { - int diff; + int64_t diff; if (NVRAM->alrm_timer != NULL) { timer_del(NVRAM->alrm_timer); diff = qemu_timedate_diff(&NVRAM->alarm) - NVRAM->time_offset; -- 2.34.1 In the twl92230 device, use int64_t for the two state fields sec_offset and alm_sec, because we set these to values that are either time_t or differences between two time_t values. These fields aren't saved in vmstate anywhere, so we can safely widen them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/twl92230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/rtc/twl92230.c b/hw/rtc/twl92230.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/twl92230.c +++ b/hw/rtc/twl92230.c @@ -XXX,XX +XXX,XX @@ struct MenelausState { struct tm tm; struct tm new; struct tm alm; - int sec_offset; - int alm_sec; + int64_t sec_offset; + int64_t alm_sec; int next_comp; } rtc; uint16_t rtc_next_vmstate; -- 2.34.1 In the aspeed_rtc device we store a difference between two time_t values in an 'int'. This is not really correct when time_t could be 64 bits. Enlarge the field to 'int64_t'. This is a migration compatibility break for the aspeed boards. While we are changing the vmstate, remove the accidental duplicate of the offset field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> --- include/hw/rtc/aspeed_rtc.h | 2 +- hw/rtc/aspeed_rtc.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/hw/rtc/aspeed_rtc.h b/include/hw/rtc/aspeed_rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/rtc/aspeed_rtc.h +++ b/include/hw/rtc/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ struct AspeedRtcState { qemu_irq irq; uint32_t reg[0x18]; - int offset; + int64_t offset; }; diff --git a/hw/rtc/aspeed_rtc.c b/hw/rtc/aspeed_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/aspeed_rtc.c +++ b/hw/rtc/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_rtc_ops = { static const VMStateDescription vmstate_aspeed_rtc = { .name = TYPE_ASPEED_RTC, - .version_id = 1, + .version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), - VMSTATE_INT32(offset, AspeedRtcState), - VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT64(offset, AspeedRtcState), VMSTATE_END_OF_LIST() } }; -- 2.34.1 The functions qemu_get_timedate() and qemu_timedate_diff() take and return a time offset as an integer. Coverity points out that means that when an RTC device implementation holds an offset as a time_t, as the m48t59 does, the time_t will get truncated. (CID 1507157, 1517772). The functions work with time_t internally, so make them use that type in their APIs. Note that this won't help any Y2038 issues where either the device model itself is keeping the offset in a 32-bit integer, or where the hardware under emulation has Y2038 or other rollover problems. If we missed any cases of the former then hopefully Coverity will warn us about them since after this patch we'd be truncating a time_t in assignments from qemu_timedate_diff().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- include/sysemu/rtc.h | 4 ++-- softmmu/rtc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sysemu/rtc.h b/include/sysemu/rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/rtc.h +++ b/include/sysemu/rtc.h @@ -XXX,XX +XXX,XX @@ * The behaviour of the clock whose value this function returns will * depend on the -rtc command line option passed by the user. */ -void qemu_get_timedate(struct tm *tm, int offset); +void qemu_get_timedate(struct tm *tm, time_t offset); /** * qemu_timedate_diff: Return difference between a struct tm and the RTC @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset); * a timestamp one hour further ahead than the current RTC time * then this function will return 3600. */ -int qemu_timedate_diff(struct tm *tm); +time_t qemu_timedate_diff(struct tm *tm); #endif diff --git a/softmmu/rtc.c b/softmmu/rtc.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/rtc.c +++ b/softmmu/rtc.c @@ -XXX,XX +XXX,XX @@ static time_t qemu_ref_timedate(QEMUClockType clock) return value; } -void qemu_get_timedate(struct tm *tm, int offset) +void qemu_get_timedate(struct tm *tm, time_t offset) { time_t ti = qemu_ref_timedate(rtc_clock); @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset) } } -int qemu_timedate_diff(struct tm *tm) +time_t qemu_timedate_diff(struct tm *tm) { time_t seconds; -- 2.34.1 Where architecturally one ARM_FEATURE_X flag implies another ARM_FEATURE_Y, we allow the CPU init function to only set X, and then set Y for it. Currently we do this in two places -- we set a few flags in arm_cpu_post_init() because we need them to decide which properties to create on the CPU object, and then we do the rest in arm_cpu_realizefn(). However, this is fragile, because it's easy to add a new property and not notice that this means that an X-implies-Y check now has to move from realize to post-init. As a specific example, the pmsav7-dregion property is conditional on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and rely on V8-implies-V7, which doesn't happen until the realizefn. Move all of these X-implies-Y checks into a new function, which we call at the top of arm_cpu_post_init(), so the feature bits are available at that point. This does now give us the reverse issue, that if there's a feature bit which is enabled or disabled by the setting of a property then then X-implies-Y features that are dependent on that property need to be in realize, not in this new function. But the only one of those is the "EL3 implies VBAR" which is already in the right place, so putting things this way round seems better to me. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org --- target/arm/cpu.c | 179 +++++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 82 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ unsigned int gt_cntfrq_period_ns(ARMCPU *cpu) NANOSECONDS_PER_SECOND / cpu->gt_cntfrq_hz : 1; } +static void arm_cpu_propagate_feature_implications(ARMCPU *cpu) +{ + CPUARMState *env = &cpu->env; + bool no_aa32 = false; + + /* + * Some features automatically imply others: set the feature + * bits explicitly for these cases. + */ + + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_PMSA); + } + + if (arm_feature(env, ARM_FEATURE_V8)) { + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V7); + } else { + set_feature(env, ARM_FEATURE_V7VE); + } + } + + /* + * There exist AArch64 cpus without AArch32 support. When KVM + * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. + * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. + * As a general principle, we also do not make ID register + * consistency checks anywhere unless using TCG, because only + * for TCG would a consistency-check failure be a QEMU bug. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); + } + + if (arm_feature(env, ARM_FEATURE_V7VE)) { + /* + * v7 Virtualization Extensions. In real hardware this implies + * EL2 and also the presence of the Security Extensions. + * For QEMU, for backwards-compatibility we implement some + * CPUs or CPU configs which have no actual EL2 or EL3 but do + * include the various other features that V7VE implies. + * Presence of EL2 itself is ARM_FEATURE_EL2, and of the + * Security Extensions is ARM_FEATURE_EL3. + */ + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_arm_div, cpu)); + set_feature(env, ARM_FEATURE_LPAE); + set_feature(env, ARM_FEATURE_V7); + } + if (arm_feature(env, ARM_FEATURE_V7)) { + set_feature(env, ARM_FEATURE_VAPA); + set_feature(env, ARM_FEATURE_THUMB2); + set_feature(env, ARM_FEATURE_MPIDR); + if (!arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V6K); + } else { + set_feature(env, ARM_FEATURE_V6); + } + + /* + * Always define VBAR for V7 CPUs even if it doesn't exist in + * non-EL3 configs. This is needed by some legacy boards. + */ + set_feature(env, ARM_FEATURE_VBAR); + } + if (arm_feature(env, ARM_FEATURE_V6K)) { + set_feature(env, ARM_FEATURE_V6); + set_feature(env, ARM_FEATURE_MVFR); + } + if (arm_feature(env, ARM_FEATURE_V6)) { + set_feature(env, ARM_FEATURE_V5); + if (!arm_feature(env, ARM_FEATURE_M)) { + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_jazelle, cpu)); + set_feature(env, ARM_FEATURE_AUXCR); + } + } + if (arm_feature(env, ARM_FEATURE_V5)) { + set_feature(env, ARM_FEATURE_V4T); + } + if (arm_feature(env, ARM_FEATURE_LPAE)) { + set_feature(env, ARM_FEATURE_V7MP); + } + if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { + set_feature(env, ARM_FEATURE_CBAR); + } + if (arm_feature(env, ARM_FEATURE_THUMB2) && + !arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_THUMB_DSP); + } +} + void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - /* M profile implies PMSA. We have to do this here rather than - * in realize with the other feature-implication checks because - * we look at the PMSA bit to see if we should add some properties. + /* + * Some features imply others. Figure this out now, because we + * are going to look at the feature bits in deciding which + * properties to add. */ - if (arm_feature(&cpu->env, ARM_FEATURE_M)) { - set_feature(&cpu->env, ARM_FEATURE_PMSA); - } + arm_cpu_propagate_feature_implications(cpu); if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) CPUARMState *env = &cpu->env; int pagebits; Error *local_err = NULL; - bool no_aa32 = false; /* Use pc-relative instructions in system-mode */ #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->isar.id_isar3 = u; } - /* Some features automatically imply others: */ - if (arm_feature(env, ARM_FEATURE_V8)) { - if (arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V7); - } else { - set_feature(env, ARM_FEATURE_V7VE); - } - } - - /* - * There exist AArch64 cpus without AArch32 support. When KVM - * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. - * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. - * As a general principle, we also do not make ID register - * consistency checks anywhere unless using TCG, because only - * for TCG would a consistency-check failure be a QEMU bug. - */ - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { - no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); - } - - if (arm_feature(env, ARM_FEATURE_V7VE)) { - /* v7 Virtualization Extensions. In real hardware this implies - * EL2 and also the presence of the Security Extensions. - * For QEMU, for backwards-compatibility we implement some - * CPUs or CPU configs which have no actual EL2 or EL3 but do - * include the various other features that V7VE implies. - * Presence of EL2 itself is ARM_FEATURE_EL2, and of the - * Security Extensions is ARM_FEATURE_EL3. - */ - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_arm_div, cpu)); - set_feature(env, ARM_FEATURE_LPAE); - set_feature(env, ARM_FEATURE_V7); - } - if (arm_feature(env, ARM_FEATURE_V7)) { - set_feature(env, ARM_FEATURE_VAPA); - set_feature(env, ARM_FEATURE_THUMB2); - set_feature(env, ARM_FEATURE_MPIDR); - if (!arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V6K); - } else { - set_feature(env, ARM_FEATURE_V6); - } - - /* Always define VBAR for V7 CPUs even if it doesn't exist in - * non-EL3 configs. This is needed by some legacy boards. - */ - set_feature(env, ARM_FEATURE_VBAR); - } - if (arm_feature(env, ARM_FEATURE_V6K)) { - set_feature(env, ARM_FEATURE_V6); - set_feature(env, ARM_FEATURE_MVFR); - } - if (arm_feature(env, ARM_FEATURE_V6)) { - set_feature(env, ARM_FEATURE_V5); - if (!arm_feature(env, ARM_FEATURE_M)) { - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_jazelle, cpu)); - set_feature(env, ARM_FEATURE_AUXCR); - } - } - if (arm_feature(env, ARM_FEATURE_V5)) { - set_feature(env, ARM_FEATURE_V4T); - } - if (arm_feature(env, ARM_FEATURE_LPAE)) { - set_feature(env, ARM_FEATURE_V7MP); - } - if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { - set_feature(env, ARM_FEATURE_CBAR); - } - if (arm_feature(env, ARM_FEATURE_THUMB2) && - !arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_THUMB_DSP); - } /* * We rely on no XScale CPU having VFP so we can use the same bits in the -- 2.34.1 M-profile CPUs generally allow configuration of the number of MPU regions that they have. We don't currently model this, so our implementations of some of the board models provide CPUs with the wrong number of regions. RTOSes like Zephyr that hardcode the expected number of regions may therefore not run on the model if they are set up to run on real hardware. Add properties mpu-ns-regions and mpu-s-regions to the ARMV7M object, matching the ability of hardware to configure the number of Secure and NonSecure regions separately. Our actual CPU implementation doesn't currently support that, and it happens that none of the MPS boards we model set the number of regions differently for Secure vs NonSecure, so we provide an interface to the boards and SoCs that won't need to change if we ever do add that functionality in future, but make it an error to configure the two properties to different values. (The property name on the CPU is the somewhat misnamed-for-M-profile "pmsav7-dregion", so we don't follow that naming convention for the properties here. The TRM doesn't say what the CPU configuration variable names are, so we pick something, and follow the lowercase convention we already have for properties here.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-3-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 8 ++++++++ hw/arm/armv7m.c | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ARMv7MState, ARMV7M) * + Property "vfp": enable VFP (forwarded to CPU object) * + Property "dsp": enable DSP (forwarded to CPU object) * + Property "enable-bitband": expose bitbanded IO + * + Property "mpu-ns-regions": number of Non-Secure MPU regions (forwarded + * to CPU object pmsav7-dregion property; default is whatever the default + * for the CPU is) + * + Property "mpu-s-regions": number of Secure MPU regions (default is + * whatever the default for the CPU is; must currently be set to the same + * value as mpu-ns-regions if the CPU implements the Security Extension) * + Clock input "refclk" is the external reference clock for the systick timers * + Clock input "cpuclk" is the main CPU clock */ @@ -XXX,XX +XXX,XX @@ struct ARMv7MState { Object *idau; uint32_t init_svtor; uint32_t init_nsvtor; + uint32_t mpu_ns_regions; + uint32_t mpu_s_regions; bool enable_bitband; bool start_powered_off; bool vfp; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) } } + /* + * Real M-profile hardware can be configured with a different number of + * MPU regions for Secure vs NonSecure. QEMU's CPU implementation doesn't + * support that yet, so catch attempts to select that. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + s->mpu_ns_regions != s->mpu_s_regions) { + error_setg(errp, + "mpu-ns-regions and mpu-s-regions properties must have the same value"); + return; + } + if (s->mpu_ns_regions != UINT_MAX && + object_property_find(OBJECT(s->cpu), "pmsav7-dregion")) { + if (!object_property_set_uint(OBJECT(s->cpu), "pmsav7-dregion", + s->mpu_ns_regions, errp)) { + return; + } + } + /* * Tell the CPU where the NVIC is; it will fail realize if it doesn't * have one. Similarly, tell the NVIC where its CPU is. @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { false), DEFINE_PROP_BOOL("vfp", ARMv7MState, vfp, true), DEFINE_PROP_BOOL("dsp", ARMv7MState, dsp, true), + DEFINE_PROP_UINT32("mpu-ns-regions", ARMv7MState, mpu_ns_regions, UINT_MAX), + DEFINE_PROP_UINT32("mpu-s-regions", ARMv7MState, mpu_s_regions, UINT_MAX), DEFINE_PROP_END_OF_LIST(), }; -- 2.34.1 The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The MPS2/MPS3 FPGA images don't override these except in the case of AN547, which uses 16 MPU regions. Define properties on the ARMSSE object for the MPU regions (using the same names as the documented RTL configuration settings, and following the pattern we already have for this device of using all-caps names as the RTL does), and set them in the board code. We don't actually need to override the default except on AN547, but it's simpler code to have the board code set them always rather than tracking which board subtypes want to set them to a non-default value separately from what that value is. Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524 we now correctly use 8 MPU regions, while mps3-an547 stays at its current 16 regions. It's possible some guest code wrongly depended on the previous incorrectly modeled number of memory regions. (Such guest code should ideally check the number of regions via the MPU_TYPE register.) The old behaviour can be obtained with additional -global arguments to QEMU: For mps2-an521 and mps2-an524: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16 For mps2-an505: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 NB that the way the implementation allows this use of -global is slightly fragile: if the board code explicitly sets the properties on the sse-200 object, this overrides the -global command line option. So we rely on: - the boards that need fixing all happen to use the SSE defaults - we can write the board code to only set the property if it is different from the default, rather than having all boards explicitly set the property - the board that does need to use a non-default value happens to need to set it to the same value (16) we previously used This works, but there are some kinds of refactoring of the mps2-tz.c code that would break the support for -global here. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 5 +++++ hw/arm/armsse.c | 16 ++++++++++++++++ hw/arm/mps2-tz.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an * SSE-200 both are present; CPU0 in an SSE-200 has neither. * Since the IoTKit has only one CPU, it does not have the CPU1_* properties. + * + QOM properties "CPU0_MPU_NS", "CPU0_MPU_S", "CPU1_MPU_NS" and "CPU1_MPU_S" + * which set the number of MPU regions on the CPUs. If there is only one + * CPU the CPU1 properties are not present. * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, * which are wired to its NVIC lines 32 .. n+32 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t exp_numirq; uint32_t sram_addr_width; uint32_t init_svtor; + uint32_t cpu_mpu_ns[SSE_MAX_CPUS]; + uint32_t cpu_mpu_s[SSE_MAX_CPUS]; bool cpu_fpu[SSE_MAX_CPUS]; bool cpu_dsp[SSE_MAX_CPUS]; }; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse200_properties[] = { DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], false), DEFINE_PROP_BOOL("CPU1_FPU", ARMSSE, cpu_fpu[1], true), DEFINE_PROP_BOOL("CPU1_DSP", ARMSSE, cpu_dsp[1], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), + DEFINE_PROP_UINT32("CPU1_MPU_NS", ARMSSE, cpu_mpu_ns[1], 8), + DEFINE_PROP_UINT32("CPU1_MPU_S", ARMSSE, cpu_mpu_s[1], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse300_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } } + if (!object_property_set_uint(cpuobj, "mpu-ns-regions", + s->cpu_mpu_ns[i], errp)) { + return; + } + if (!object_property_set_uint(cpuobj, "mpu-s-regions", + s->cpu_mpu_s[i], errp)) { + return; + } if (i > 0) { memory_region_add_subregion_overlap(&s->cpu_container[i], 0, diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineClass { int uart_overflow_irq; /* number of the combined UART overflow IRQ */ uint32_t init_svtor; /* init-svtor setting for SSE */ uint32_t sram_addr_width; /* SRAM_ADDR_WIDTH setting for SSE */ + uint32_t cpu0_mpu_ns; /* CPU0_MPU_NS setting for SSE */ + uint32_t cpu0_mpu_s; /* CPU0_MPU_S setting for SSE */ + uint32_t cpu1_mpu_ns; /* CPU1_MPU_NS setting for SSE */ + uint32_t cpu1_mpu_s; /* CPU1_MPU_S setting for SSE */ const RAMInfo *raminfo; const char *armsse_type; uint32_t boot_ram_size; /* size of ram at address 0; 0 == find in raminfo */ @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) #define MPS3_DDR_SIZE (2 * GiB) #endif +/* For cpu{0,1}_mpu_{ns,s}, means "leave at SSE's default value" */ +#define MPU_REGION_DEFAULT UINT32_MAX + static const uint32_t an505_oscclk[] = { 40000000, 24580000, @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq); qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor); + if (mmc->cpu0_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_NS", mmc->cpu0_mpu_ns); + } + if (mmc->cpu0_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_S", mmc->cpu0_mpu_s); + } + if (object_property_find(OBJECT(iotkitdev), "CPU1_MPU_NS")) { + if (mmc->cpu1_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_NS", mmc->cpu1_mpu_ns); + } + if (mmc->cpu1_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_S", mmc->cpu1_mpu_s); + } + } qdev_prop_set_uint32(iotkitdev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); @@ -XXX,XX +XXX,XX @@ static void mps2tz_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); mc->init = mps2tz_common_init; mc->reset = mps2_machine_reset; iic->check = mps2_tz_idau_check; + + /* Most machines leave these at the SSE defaults */ + mmc->cpu0_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu0_mpu_s = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_s = MPU_REGION_DEFAULT; } static void mps2tz_set_default_ram_info(MPS2TZMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3tz_an547_class_init(ObjectClass *oc, void *data) mmc->numirq = 96; mmc->uart_overflow_irq = 48; mmc->init_svtor = 0x00000000; + mmc->cpu0_mpu_s = mmc->cpu0_mpu_ns = 16; mmc->sram_addr_width = 21; mmc->raminfo = an547_raminfo; mmc->armsse_type = TYPE_SSE300; -- 2.34.1