First arm pullreq for 7.1. The bulk of this is the qemu_split_irq removal. I have enough stuff in my to-review queue that I expect to do another pullreq early next week, but 31 patches is enough to not hang on to. thanks -- PMM The following changes since commit 9c125d17e9402c232c46610802e5931b3639d77b: Merge tag 'pull-tcg-20220420' of https://gitlab.com/rth7680/qemu into staging (2022-04-20 16:43:11 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220421 for you to fetch changes up to 5b415dd61bdbf61fb4be0e9f1a7172b8bce682c6: hw/arm: Use bit fields for NPCM7XX PWRON STRAPs (2022-04-21 11:37:05 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF * versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem * versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s * xlnx-zynqmp: Connect 4 TTC timers * exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq * realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' * stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' * hw/core/irq: remove unused 'qemu_irq_split' function * npcm7xx: use symbolic constants for PWRON STRAP bit fields * virt: document impact of gic-version on max CPUs ---------------------------------------------------------------- Edgar E. Iglesias (6): timer: cadence_ttc: Break out header file to allow embedding hw/arm/xlnx-zynqmp: Connect 4 TTC timers hw/arm: versal: Create an APU CPU Cluster hw/arm: versal: Add the Cortex-R5Fs hw/misc: Add a model of the Xilinx Versal CRL hw/arm: versal: Connect the CRL Hao Wu (2): hw/misc: Add PWRON STRAP bit fields in GCR module hw/arm: Use bit fields for NPCM7XX PWRON STRAPs Heinrich Schuchardt (1): hw/arm/virt: impact of gic-version on max CPUs Peter Maydell (19): hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF hw/arm/exynos4210: Use TYPE_OR_IRQ instead of custom OR-gate device hw/intc/exynos4210_gic: Remove unused TYPE_EXYNOS4210_IRQ_GATE hw/arm/exynos4210: Put a9mpcore device into state struct hw/arm/exynos4210: Drop int_gic_irq[] from Exynos4210Irq struct hw/arm/exynos4210: Coalesce board_irqs and irq_table hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[] hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c hw/arm/exynos4210: Put external GIC into state struct hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c hw/arm/exynos4210: Delete unused macro definitions hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs() hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs() hw/arm/exynos4210: Put combiners into state struct hw/arm/exynos4210: Drop Exynos4210Irq struct Zongyuan Li (3): hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' hw/core/irq: remove unused 'qemu_irq_split' function docs/system/arm/virt.rst | 4 +- include/hw/arm/exynos4210.h | 50 ++-- include/hw/arm/xlnx-versal.h | 16 ++ include/hw/arm/xlnx-zynqmp.h | 4 + include/hw/intc/exynos4210_combiner.h | 57 +++++ include/hw/intc/exynos4210_gic.h | 43 ++++ include/hw/irq.h | 5 - include/hw/misc/npcm7xx_gcr.h | 30 +++ include/hw/misc/xlnx-versal-crl.h | 235 +++++++++++++++++++ include/hw/timer/cadence_ttc.h | 54 +++++ hw/arm/exynos4210.c | 430 ++++++++++++++++++++++++++++++---- hw/arm/npcm7xx_boards.c | 24 +- hw/arm/realview.c | 33 ++- hw/arm/stellaris.c | 15 +- hw/arm/virt.c | 7 + hw/arm/xlnx-versal-virt.c | 6 +- hw/arm/xlnx-versal.c | 99 +++++++- hw/arm/xlnx-zynqmp.c | 22 ++ hw/core/irq.c | 15 -- hw/intc/exynos4210_combiner.c | 108 +-------- hw/intc/exynos4210_gic.c | 344 +-------------------------- hw/misc/xlnx-versal-crl.c | 421 +++++++++++++++++++++++++++++++++ hw/timer/cadence_ttc.c | 32 +-- MAINTAINERS | 2 +- hw/misc/meson.build | 1 + 25 files changed, 1457 insertions(+), 600 deletions(-) create mode 100644 include/hw/intc/exynos4210_combiner.h create mode 100644 include/hw/intc/exynos4210_gic.h create mode 100644 include/hw/misc/xlnx-versal-crl.h create mode 100644 include/hw/timer/cadence_ttc.h create mode 100644 hw/misc/xlnx-versal-crl.c It's not possible to provide the guest with the Security extensions (TrustZone) when using KVM or HVF, because the hardware virtualization extensions don't permit running EL3 guest code. However, we weren't checking for this combination, with the result that QEMU would assert if you tried it: $ qemu-system-aarch64 -enable-kvm -machine virt,secure=on -cpu host -display none Unexpected error in object_property_find_err() at ../../qom/object.c:1304: qemu-system-aarch64: Property 'host-arm-cpu.secure-memory' not found Aborted Check for this combination of options and report an error, in the same way we already do for attempts to give a KVM or HVF guest the Virtualization or MTE extensions. Now we will report: qemu-system-aarch64: mach-virt: KVM does not support providing Security extensions (TrustZone) to the guest CPU Resolves: https://gitlab.com/qemu-project/qemu/-/issues/961 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404155301.566542-1-peter.maydell@linaro.org --- hw/arm/virt.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } + if (vms->secure && (kvm_enabled() || hvf_enabled())) { + error_report("mach-virt: %s does not support providing " + "Security extensions (TrustZone) to the guest CPU", + kvm_enabled() ? "KVM" : "HVF"); + exit(1); + } + if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Break out header file to allow embedding of the the TTC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220331222017.2914409-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/cadence_ttc.h | 54 ++++++++++++++++++++++++++++++++++ hw/timer/cadence_ttc.c | 32 ++------------------ 2 files changed, 56 insertions(+), 30 deletions(-) create mode 100644 include/hw/timer/cadence_ttc.h diff --git a/include/hw/timer/cadence_ttc.h b/include/hw/timer/cadence_ttc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/cadence_ttc.h @@ -XXX,XX +XXX,XX @@ +/* + * Xilinx Zynq cadence TTC model + * + * Copyright (c) 2011 Xilinx Inc. + * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) + * Copyright (c) 2012 PetaLogix Pty Ltd. + * Written By Haibing Ma + * M. Habib + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HW_TIMER_CADENCE_TTC_H +#define HW_TIMER_CADENCE_TTC_H + +#include "hw/sysbus.h" +#include "qemu/timer.h" + +typedef struct { + QEMUTimer *timer; + int freq; + + uint32_t reg_clock; + uint32_t reg_count; + uint32_t reg_value; + uint16_t reg_interval; + uint16_t reg_match[3]; + uint32_t reg_intr; + uint32_t reg_intr_en; + uint32_t reg_event_ctrl; + uint32_t reg_event; + + uint64_t cpu_time; + unsigned int cpu_time_valid; + + qemu_irq irq; +} CadenceTimerState; + +#define TYPE_CADENCE_TTC "cadence_ttc" +OBJECT_DECLARE_SIMPLE_TYPE(CadenceTTCState, CADENCE_TTC) + +struct CadenceTTCState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + CadenceTimerState timer[3]; +}; + +#endif diff --git a/hw/timer/cadence_ttc.c b/hw/timer/cadence_ttc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cadence_ttc.c +++ b/hw/timer/cadence_ttc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qom/object.h" +#include "hw/timer/cadence_ttc.h" + #ifdef CADENCE_TTC_ERR_DEBUG #define DB_PRINT(...) do { \ fprintf(stderr, ": %s: ", __func__); \ @@ -XXX,XX +XXX,XX @@ #define CLOCK_CTRL_PS_EN 0x00000001 #define CLOCK_CTRL_PS_V 0x0000001e -typedef struct { - QEMUTimer *timer; - int freq; - - uint32_t reg_clock; - uint32_t reg_count; - uint32_t reg_value; - uint16_t reg_interval; - uint16_t reg_match[3]; - uint32_t reg_intr; - uint32_t reg_intr_en; - uint32_t reg_event_ctrl; - uint32_t reg_event; - - uint64_t cpu_time; - unsigned int cpu_time_valid; - - qemu_irq irq; -} CadenceTimerState; - -#define TYPE_CADENCE_TTC "cadence_ttc" -OBJECT_DECLARE_SIMPLE_TYPE(CadenceTTCState, CADENCE_TTC) - -struct CadenceTTCState { - SysBusDevice parent_obj; - - MemoryRegion iomem; - CadenceTimerState timer[3]; -}; - static void cadence_timer_update(CadenceTimerState *s) { qemu_set_irq(s->irq, !!(s->reg_intr & s->reg_intr_en)); -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Connect the 4 TTC timers on the ZynqMP. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220331222017.2914409-3-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 4 ++++ hw/arm/xlnx-zynqmp.c | 22 ++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/misc/xlnx-zynqmp-apu-ctrl.h" #include "hw/misc/xlnx-zynqmp-crf.h" +#include "hw/timer/cadence_ttc.h" #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp" OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) #define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \ XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE) +#define XLNX_ZYNQMP_NUM_TTC 4 + /* * Unimplemented mmio regions needed to boot some images. */ @@ -XXX,XX +XXX,XX @@ struct XlnxZynqMPState { qemu_or_irq qspi_irq_orgate; XlnxZynqMPAPUCtrl apu_ctrl; XlnxZynqMPCRF crf; + CadenceTTCState ttc[XLNX_ZYNQMP_NUM_TTC]; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define APU_ADDR 0xfd5c0000 #define APU_IRQ 153 +#define TTC0_ADDR 0xFF110000 +#define TTC0_IRQ 36 + #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_create_crf(XlnxZynqMPState *s, qemu_irq *gic) sysbus_connect_irq(sbd, 0, gic[CRF_IRQ]); } +static void xlnx_zynqmp_create_ttc(XlnxZynqMPState *s, qemu_irq *gic) +{ + SysBusDevice *sbd; + int i, irq; + + for (i = 0; i < XLNX_ZYNQMP_NUM_TTC; i++) { + object_initialize_child(OBJECT(s), "ttc[*]", &s->ttc[i], + TYPE_CADENCE_TTC); + sbd = SYS_BUS_DEVICE(&s->ttc[i]); + + sysbus_realize(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, TTC0_ADDR + i * 0x10000); + for (irq = 0; irq < 3; irq++) { + sysbus_connect_irq(sbd, irq, gic[TTC0_IRQ + i * 3 + irq]); + } + } +} + static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s) { static const struct UnimpInfo { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) xlnx_zynqmp_create_efuse(s, gic_spi); xlnx_zynqmp_create_apu_ctrl(s, gic_spi); xlnx_zynqmp_create_crf(s, gic_spi); + xlnx_zynqmp_create_ttc(s, gic_spi); xlnx_zynqmp_create_unimp_mmio(s); for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) { -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Create an APU CPU Cluster. This is in preparation to add the RPU. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-2-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 2 ++ hw/arm/xlnx-versal.c | 9 ++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/boot.h" +#include "hw/cpu/cluster.h" #include "hw/or-irq.h" #include "hw/sd/sdhci.h" #include "hw/intc/arm_gicv3.h" @@ -XXX,XX +XXX,XX @@ struct Versal { struct { struct { MemoryRegion mr; + CPUClusterState cluster; ARMCPU cpu[XLNX_VERSAL_NR_ACPUS]; GICv3State gic; } apu; diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_cpus(Versal *s) { int i; + object_initialize_child(OBJECT(s), "apu-cluster", &s->fpd.apu.cluster, + TYPE_CPU_CLUSTER); + qdev_prop_set_uint32(DEVICE(&s->fpd.apu.cluster), "cluster-id", 0); + for (i = 0; i < ARRAY_SIZE(s->fpd.apu.cpu); i++) { Object *obj; - object_initialize_child(OBJECT(s), "apu-cpu[*]", &s->fpd.apu.cpu[i], + object_initialize_child(OBJECT(&s->fpd.apu.cluster), + "apu-cpu[*]", &s->fpd.apu.cpu[i], XLNX_VERSAL_ACPU_TYPE); obj = OBJECT(&s->fpd.apu.cpu[i]); if (i) { @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_cpus(Versal *s) &error_abort); qdev_realize(DEVICE(obj), NULL, &error_fatal); } + + qdev_realize(DEVICE(&s->fpd.apu.cluster), NULL, &error_fatal); } static void versal_create_apu_gic(Versal *s, qemu_irq *pic) -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Add the Cortex-R5Fs of the Versal RPU (Real-time Processing Unit) subsystem. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-3-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 10 ++++++++++ hw/arm/xlnx-versal-virt.c | 6 +++--- hw/arm/xlnx-versal.c | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 49 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL) #define XLNX_VERSAL_NR_ACPUS 2 +#define XLNX_VERSAL_NR_RCPUS 2 #define XLNX_VERSAL_NR_UARTS 2 #define XLNX_VERSAL_NR_GEMS 2 #define XLNX_VERSAL_NR_ADMAS 8 @@ -XXX,XX +XXX,XX @@ struct Versal { VersalUsb2 usb; } iou; + /* Real-time Processing Unit. */ + struct { + MemoryRegion mr; + MemoryRegion mr_ps_alias; + + CPUClusterState cluster; + ARMCPU cpu[XLNX_VERSAL_NR_RCPUS]; + } rpu; + struct { qemu_or_irq irq_orgate; XlnxXramCtrl ctrl[XLNX_VERSAL_NR_XRAM]; diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void versal_virt_machine_class_init(ObjectClass *oc, void *data) mc->desc = "Xilinx Versal Virtual development board"; mc->init = versal_virt_init; - mc->min_cpus = XLNX_VERSAL_NR_ACPUS; - mc->max_cpus = XLNX_VERSAL_NR_ACPUS; - mc->default_cpus = XLNX_VERSAL_NR_ACPUS; + mc->min_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; + mc->max_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; + mc->default_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; mc->no_cdrom = true; mc->default_ram_id = "ddr"; } diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #define XLNX_VERSAL_ACPU_TYPE ARM_CPU_TYPE_NAME("cortex-a72") +#define XLNX_VERSAL_RCPU_TYPE ARM_CPU_TYPE_NAME("cortex-r5f") #define GEM_REVISION 0x40070106 #define VERSAL_NUM_PMC_APB_IRQS 3 @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_gic(Versal *s, qemu_irq *pic) } } +static void versal_create_rpu_cpus(Versal *s) +{ + int i; + + object_initialize_child(OBJECT(s), "rpu-cluster", &s->lpd.rpu.cluster, + TYPE_CPU_CLUSTER); + qdev_prop_set_uint32(DEVICE(&s->lpd.rpu.cluster), "cluster-id", 1); + + for (i = 0; i < ARRAY_SIZE(s->lpd.rpu.cpu); i++) { + Object *obj; + + object_initialize_child(OBJECT(&s->lpd.rpu.cluster), + "rpu-cpu[*]", &s->lpd.rpu.cpu[i], + XLNX_VERSAL_RCPU_TYPE); + obj = OBJECT(&s->lpd.rpu.cpu[i]); + object_property_set_bool(obj, "start-powered-off", true, + &error_abort); + + object_property_set_int(obj, "mp-affinity", 0x100 | i, &error_abort); + object_property_set_int(obj, "core-count", ARRAY_SIZE(s->lpd.rpu.cpu), + &error_abort); + object_property_set_link(obj, "memory", OBJECT(&s->lpd.rpu.mr), + &error_abort); + qdev_realize(DEVICE(obj), NULL, &error_fatal); + } + + qdev_realize(DEVICE(&s->lpd.rpu.cluster), NULL, &error_fatal); +} + static void versal_create_uarts(Versal *s, qemu_irq *pic) { int i; @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_apu_cpus(s); versal_create_apu_gic(s, pic); + versal_create_rpu_cpus(s); versal_create_uarts(s, pic); versal_create_usbs(s, pic); versal_create_gems(s, pic); @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) memory_region_add_subregion_overlap(&s->mr_ps, MM_OCM, &s->lpd.mr_ocm, 0); memory_region_add_subregion_overlap(&s->fpd.apu.mr, 0, &s->mr_ps, 0); + memory_region_add_subregion_overlap(&s->lpd.rpu.mr, 0, + &s->lpd.rpu.mr_ps_alias, 0); } static void versal_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void versal_init(Object *obj) Versal *s = XLNX_VERSAL(obj); memory_region_init(&s->fpd.apu.mr, obj, "mr-apu", UINT64_MAX); + memory_region_init(&s->lpd.rpu.mr, obj, "mr-rpu", UINT64_MAX); memory_region_init(&s->mr_ps, obj, "mr-ps-switch", UINT64_MAX); + memory_region_init_alias(&s->lpd.rpu.mr_ps_alias, OBJECT(s), + "mr-rpu-ps-alias", &s->mr_ps, 0, UINT64_MAX); } static Property versal_properties[] = { -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Add a model of the Xilinx Versal CRL. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/xlnx-versal-crl.h | 235 +++++++++++++++++ hw/misc/xlnx-versal-crl.c | 421 ++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + 3 files changed, 657 insertions(+) create mode 100644 include/hw/misc/xlnx-versal-crl.h create mode 100644 hw/misc/xlnx-versal-crl.c diff --git a/include/hw/misc/xlnx-versal-crl.h b/include/hw/misc/xlnx-versal-crl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/xlnx-versal-crl.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Clock-Reset-LPD (CRL). + * + * Copyright (c) 2022 Xilinx Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Edgar E. Iglesias <edgar.iglesias@xilinx.com> + */ +#ifndef HW_MISC_XLNX_VERSAL_CRL_H +#define HW_MISC_XLNX_VERSAL_CRL_H + +#include "hw/sysbus.h" +#include "hw/register.h" +#include "target/arm/cpu.h" + +#define TYPE_XLNX_VERSAL_CRL "xlnx,versal-crl" +OBJECT_DECLARE_SIMPLE_TYPE(XlnxVersalCRL, XLNX_VERSAL_CRL) + +REG32(ERR_CTRL, 0x0) + FIELD(ERR_CTRL, SLVERR_ENABLE, 0, 1) +REG32(IR_STATUS, 0x4) + FIELD(IR_STATUS, ADDR_DECODE_ERR, 0, 1) +REG32(IR_MASK, 0x8) + FIELD(IR_MASK, ADDR_DECODE_ERR, 0, 1) +REG32(IR_ENABLE, 0xc) + FIELD(IR_ENABLE, ADDR_DECODE_ERR, 0, 1) +REG32(IR_DISABLE, 0x10) + FIELD(IR_DISABLE, ADDR_DECODE_ERR, 0, 1) +REG32(WPROT, 0x1c) + FIELD(WPROT, ACTIVE, 0, 1) +REG32(PLL_CLK_OTHER_DMN, 0x20) + FIELD(PLL_CLK_OTHER_DMN, APLL_BYPASS, 0, 1) +REG32(RPLL_CTRL, 0x40) + FIELD(RPLL_CTRL, POST_SRC, 24, 3) + FIELD(RPLL_CTRL, PRE_SRC, 20, 3) + FIELD(RPLL_CTRL, CLKOUTDIV, 16, 2) + FIELD(RPLL_CTRL, FBDIV, 8, 8) + FIELD(RPLL_CTRL, BYPASS, 3, 1) + FIELD(RPLL_CTRL, RESET, 0, 1) +REG32(RPLL_CFG, 0x44) + FIELD(RPLL_CFG, LOCK_DLY, 25, 7) + FIELD(RPLL_CFG, LOCK_CNT, 13, 10) + FIELD(RPLL_CFG, LFHF, 10, 2) + FIELD(RPLL_CFG, CP, 5, 4) + FIELD(RPLL_CFG, RES, 0, 4) +REG32(RPLL_FRAC_CFG, 0x48) + FIELD(RPLL_FRAC_CFG, ENABLED, 31, 1) + FIELD(RPLL_FRAC_CFG, SEED, 22, 3) + FIELD(RPLL_FRAC_CFG, ALGRTHM, 19, 1) + FIELD(RPLL_FRAC_CFG, ORDER, 18, 1) + FIELD(RPLL_FRAC_CFG, DATA, 0, 16) +REG32(PLL_STATUS, 0x50) + FIELD(PLL_STATUS, RPLL_STABLE, 2, 1) + FIELD(PLL_STATUS, RPLL_LOCK, 0, 1) +REG32(RPLL_TO_XPD_CTRL, 0x100) + FIELD(RPLL_TO_XPD_CTRL, CLKACT, 25, 1) + FIELD(RPLL_TO_XPD_CTRL, DIVISOR0, 8, 10) +REG32(LPD_TOP_SWITCH_CTRL, 0x104) + FIELD(LPD_TOP_SWITCH_CTRL, CLKACT_ADMA, 26, 1) + FIELD(LPD_TOP_SWITCH_CTRL, CLKACT, 25, 1) + FIELD(LPD_TOP_SWITCH_CTRL, DIVISOR0, 8, 10) + FIELD(LPD_TOP_SWITCH_CTRL, SRCSEL, 0, 3) +REG32(LPD_LSBUS_CTRL, 0x108) + FIELD(LPD_LSBUS_CTRL, CLKACT, 25, 1) + FIELD(LPD_LSBUS_CTRL, DIVISOR0, 8, 10) + FIELD(LPD_LSBUS_CTRL, SRCSEL, 0, 3) +REG32(CPU_R5_CTRL, 0x10c) + FIELD(CPU_R5_CTRL, CLKACT_OCM2, 28, 1) + FIELD(CPU_R5_CTRL, CLKACT_OCM, 27, 1) + FIELD(CPU_R5_CTRL, CLKACT_CORE, 26, 1) + FIELD(CPU_R5_CTRL, CLKACT, 25, 1) + FIELD(CPU_R5_CTRL, DIVISOR0, 8, 10) + FIELD(CPU_R5_CTRL, SRCSEL, 0, 3) +REG32(IOU_SWITCH_CTRL, 0x114) + FIELD(IOU_SWITCH_CTRL, CLKACT, 25, 1) + FIELD(IOU_SWITCH_CTRL, DIVISOR0, 8, 10) + FIELD(IOU_SWITCH_CTRL, SRCSEL, 0, 3) +REG32(GEM0_REF_CTRL, 0x118) + FIELD(GEM0_REF_CTRL, CLKACT_RX, 27, 1) + FIELD(GEM0_REF_CTRL, CLKACT_TX, 26, 1) + FIELD(GEM0_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM0_REF_CTRL, SRCSEL, 0, 3) +REG32(GEM1_REF_CTRL, 0x11c) + FIELD(GEM1_REF_CTRL, CLKACT_RX, 27, 1) + FIELD(GEM1_REF_CTRL, CLKACT_TX, 26, 1) + FIELD(GEM1_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM1_REF_CTRL, SRCSEL, 0, 3) +REG32(GEM_TSU_REF_CTRL, 0x120) + FIELD(GEM_TSU_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM_TSU_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM_TSU_REF_CTRL, SRCSEL, 0, 3) +REG32(USB0_BUS_REF_CTRL, 0x124) + FIELD(USB0_BUS_REF_CTRL, CLKACT, 25, 1) + FIELD(USB0_BUS_REF_CTRL, DIVISOR0, 8, 10) + FIELD(USB0_BUS_REF_CTRL, SRCSEL, 0, 3) +REG32(UART0_REF_CTRL, 0x128) + FIELD(UART0_REF_CTRL, CLKACT, 25, 1) + FIELD(UART0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(UART0_REF_CTRL, SRCSEL, 0, 3) +REG32(UART1_REF_CTRL, 0x12c) + FIELD(UART1_REF_CTRL, CLKACT, 25, 1) + FIELD(UART1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(UART1_REF_CTRL, SRCSEL, 0, 3) +REG32(SPI0_REF_CTRL, 0x130) + FIELD(SPI0_REF_CTRL, CLKACT, 25, 1) + FIELD(SPI0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(SPI0_REF_CTRL, SRCSEL, 0, 3) +REG32(SPI1_REF_CTRL, 0x134) + FIELD(SPI1_REF_CTRL, CLKACT, 25, 1) + FIELD(SPI1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(SPI1_REF_CTRL, SRCSEL, 0, 3) +REG32(CAN0_REF_CTRL, 0x138) + FIELD(CAN0_REF_CTRL, CLKACT, 25, 1) + FIELD(CAN0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CAN0_REF_CTRL, SRCSEL, 0, 3) +REG32(CAN1_REF_CTRL, 0x13c) + FIELD(CAN1_REF_CTRL, CLKACT, 25, 1) + FIELD(CAN1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CAN1_REF_CTRL, SRCSEL, 0, 3) +REG32(I2C0_REF_CTRL, 0x140) + FIELD(I2C0_REF_CTRL, CLKACT, 25, 1) + FIELD(I2C0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(I2C0_REF_CTRL, SRCSEL, 0, 3) +REG32(I2C1_REF_CTRL, 0x144) + FIELD(I2C1_REF_CTRL, CLKACT, 25, 1) + FIELD(I2C1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(I2C1_REF_CTRL, SRCSEL, 0, 3) +REG32(DBG_LPD_CTRL, 0x148) + FIELD(DBG_LPD_CTRL, CLKACT, 25, 1) + FIELD(DBG_LPD_CTRL, DIVISOR0, 8, 10) + FIELD(DBG_LPD_CTRL, SRCSEL, 0, 3) +REG32(TIMESTAMP_REF_CTRL, 0x14c) + FIELD(TIMESTAMP_REF_CTRL, CLKACT, 25, 1) + FIELD(TIMESTAMP_REF_CTRL, DIVISOR0, 8, 10) + FIELD(TIMESTAMP_REF_CTRL, SRCSEL, 0, 3) +REG32(CRL_SAFETY_CHK, 0x150) +REG32(PSM_REF_CTRL, 0x154) + FIELD(PSM_REF_CTRL, DIVISOR0, 8, 10) + FIELD(PSM_REF_CTRL, SRCSEL, 0, 3) +REG32(DBG_TSTMP_CTRL, 0x158) + FIELD(DBG_TSTMP_CTRL, CLKACT, 25, 1) + FIELD(DBG_TSTMP_CTRL, DIVISOR0, 8, 10) + FIELD(DBG_TSTMP_CTRL, SRCSEL, 0, 3) +REG32(CPM_TOPSW_REF_CTRL, 0x15c) + FIELD(CPM_TOPSW_REF_CTRL, CLKACT, 25, 1) + FIELD(CPM_TOPSW_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CPM_TOPSW_REF_CTRL, SRCSEL, 0, 3) +REG32(USB3_DUAL_REF_CTRL, 0x160) + FIELD(USB3_DUAL_REF_CTRL, CLKACT, 25, 1) + FIELD(USB3_DUAL_REF_CTRL, DIVISOR0, 8, 10) + FIELD(USB3_DUAL_REF_CTRL, SRCSEL, 0, 3) +REG32(RST_CPU_R5, 0x300) + FIELD(RST_CPU_R5, RESET_PGE, 4, 1) + FIELD(RST_CPU_R5, RESET_AMBA, 2, 1) + FIELD(RST_CPU_R5, RESET_CPU1, 1, 1) + FIELD(RST_CPU_R5, RESET_CPU0, 0, 1) +REG32(RST_ADMA, 0x304) + FIELD(RST_ADMA, RESET, 0, 1) +REG32(RST_GEM0, 0x308) + FIELD(RST_GEM0, RESET, 0, 1) +REG32(RST_GEM1, 0x30c) + FIELD(RST_GEM1, RESET, 0, 1) +REG32(RST_SPARE, 0x310) + FIELD(RST_SPARE, RESET, 0, 1) +REG32(RST_USB0, 0x314) + FIELD(RST_USB0, RESET, 0, 1) +REG32(RST_UART0, 0x318) + FIELD(RST_UART0, RESET, 0, 1) +REG32(RST_UART1, 0x31c) + FIELD(RST_UART1, RESET, 0, 1) +REG32(RST_SPI0, 0x320) + FIELD(RST_SPI0, RESET, 0, 1) +REG32(RST_SPI1, 0x324) + FIELD(RST_SPI1, RESET, 0, 1) +REG32(RST_CAN0, 0x328) + FIELD(RST_CAN0, RESET, 0, 1) +REG32(RST_CAN1, 0x32c) + FIELD(RST_CAN1, RESET, 0, 1) +REG32(RST_I2C0, 0x330) + FIELD(RST_I2C0, RESET, 0, 1) +REG32(RST_I2C1, 0x334) + FIELD(RST_I2C1, RESET, 0, 1) +REG32(RST_DBG_LPD, 0x338) + FIELD(RST_DBG_LPD, RPU_DBG1_RESET, 5, 1) + FIELD(RST_DBG_LPD, RPU_DBG0_RESET, 4, 1) + FIELD(RST_DBG_LPD, RESET_HSDP, 1, 1) + FIELD(RST_DBG_LPD, RESET, 0, 1) +REG32(RST_GPIO, 0x33c) + FIELD(RST_GPIO, RESET, 0, 1) +REG32(RST_TTC, 0x344) + FIELD(RST_TTC, TTC3_RESET, 3, 1) + FIELD(RST_TTC, TTC2_RESET, 2, 1) + FIELD(RST_TTC, TTC1_RESET, 1, 1) + FIELD(RST_TTC, TTC0_RESET, 0, 1) +REG32(RST_TIMESTAMP, 0x348) + FIELD(RST_TIMESTAMP, RESET, 0, 1) +REG32(RST_SWDT, 0x34c) + FIELD(RST_SWDT, RESET, 0, 1) +REG32(RST_OCM, 0x350) + FIELD(RST_OCM, RESET, 0, 1) +REG32(RST_IPI, 0x354) + FIELD(RST_IPI, RESET, 0, 1) +REG32(RST_SYSMON, 0x358) + FIELD(RST_SYSMON, SEQ_RST, 1, 1) + FIELD(RST_SYSMON, CFG_RST, 0, 1) +REG32(RST_FPD, 0x360) + FIELD(RST_FPD, SRST, 1, 1) + FIELD(RST_FPD, POR, 0, 1) +REG32(PSM_RST_MODE, 0x370) + FIELD(PSM_RST_MODE, WAKEUP, 2, 1) + FIELD(PSM_RST_MODE, RST_MODE, 0, 2) + +#define CRL_R_MAX (R_PSM_RST_MODE + 1) + +#define RPU_MAX_CPU 2 + +struct XlnxVersalCRL { + SysBusDevice parent_obj; + qemu_irq irq; + + struct { + ARMCPU *cpu_r5[RPU_MAX_CPU]; + DeviceState *adma[8]; + DeviceState *uart[2]; + DeviceState *gem[2]; + DeviceState *usb; + } cfg; + + RegisterInfoArray *reg_array; + uint32_t regs[CRL_R_MAX]; + RegisterInfo regs_info[CRL_R_MAX]; +}; +#endif diff --git a/hw/misc/xlnx-versal-crl.c b/hw/misc/xlnx-versal-crl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/xlnx-versal-crl.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Clock-Reset-LPD (CRL). + * + * Copyright (c) 2022 Advanced Micro Devices, Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Edgar E. Iglesias <edgar.iglesias@amd.com> + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "qemu/bitops.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/register.h" +#include "hw/resettable.h" + +#include "target/arm/arm-powerctl.h" +#include "hw/misc/xlnx-versal-crl.h" + +#ifndef XLNX_VERSAL_CRL_ERR_DEBUG +#define XLNX_VERSAL_CRL_ERR_DEBUG 0 +#endif + +static void crl_update_irq(XlnxVersalCRL *s) +{ + bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK]; + qemu_set_irq(s->irq, pending); +} + +static void crl_status_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + crl_update_irq(s); +} + +static uint64_t crl_enable_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] &= ~val; + crl_update_irq(s); + return 0; +} + +static uint64_t crl_disable_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] |= val; + crl_update_irq(s); + return 0; +} + +static void crl_reset_dev(XlnxVersalCRL *s, DeviceState *dev, + bool rst_old, bool rst_new) +{ + device_cold_reset(dev); +} + +static void crl_reset_cpu(XlnxVersalCRL *s, ARMCPU *armcpu, + bool rst_old, bool rst_new) +{ + if (rst_new) { + arm_set_cpu_off(armcpu->mp_affinity); + } else { + arm_set_cpu_on_and_reset(armcpu->mp_affinity); + } +} + +#define REGFIELD_RESET(type, s, reg, f, new_val, dev) { \ + bool old_f = ARRAY_FIELD_EX32((s)->regs, reg, f); \ + bool new_f = FIELD_EX32(new_val, reg, f); \ + \ + /* Detect edges. */ \ + if (dev && old_f != new_f) { \ + crl_reset_ ## type(s, dev, old_f, new_f); \ + } \ +} + +static uint64_t crl_rst_r5_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(cpu, s, RST_CPU_R5, RESET_CPU0, val64, s->cfg.cpu_r5[0]); + REGFIELD_RESET(cpu, s, RST_CPU_R5, RESET_CPU1, val64, s->cfg.cpu_r5[1]); + return val64; +} + +static uint64_t crl_rst_adma_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + int i; + + /* A single register fans out to all ADMA reset inputs. */ + for (i = 0; i < ARRAY_SIZE(s->cfg.adma); i++) { + REGFIELD_RESET(dev, s, RST_ADMA, RESET, val64, s->cfg.adma[i]); + } + return val64; +} + +static uint64_t crl_rst_uart0_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_UART0, RESET, val64, s->cfg.uart[0]); + return val64; +} + +static uint64_t crl_rst_uart1_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_UART1, RESET, val64, s->cfg.uart[1]); + return val64; +} + +static uint64_t crl_rst_gem0_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_GEM0, RESET, val64, s->cfg.gem[0]); + return val64; +} + +static uint64_t crl_rst_gem1_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_GEM1, RESET, val64, s->cfg.gem[1]); + return val64; +} + +static uint64_t crl_rst_usb_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_USB0, RESET, val64, s->cfg.usb); + return val64; +} + +static const RegisterAccessInfo crl_regs_info[] = { + { .name = "ERR_CTRL", .addr = A_ERR_CTRL, + },{ .name = "IR_STATUS", .addr = A_IR_STATUS, + .w1c = 0x1, + .post_write = crl_status_postw, + },{ .name = "IR_MASK", .addr = A_IR_MASK, + .reset = 0x1, + .ro = 0x1, + },{ .name = "IR_ENABLE", .addr = A_IR_ENABLE, + .pre_write = crl_enable_prew, + },{ .name = "IR_DISABLE", .addr = A_IR_DISABLE, + .pre_write = crl_disable_prew, + },{ .name = "WPROT", .addr = A_WPROT, + },{ .name = "PLL_CLK_OTHER_DMN", .addr = A_PLL_CLK_OTHER_DMN, + .reset = 0x1, + .rsvd = 0xe, + },{ .name = "RPLL_CTRL", .addr = A_RPLL_CTRL, + .reset = 0x24809, + .rsvd = 0xf88c00f6, + },{ .name = "RPLL_CFG", .addr = A_RPLL_CFG, + .reset = 0x2000000, + .rsvd = 0x1801210, + },{ .name = "RPLL_FRAC_CFG", .addr = A_RPLL_FRAC_CFG, + .rsvd = 0x7e330000, + },{ .name = "PLL_STATUS", .addr = A_PLL_STATUS, + .reset = R_PLL_STATUS_RPLL_STABLE_MASK | + R_PLL_STATUS_RPLL_LOCK_MASK, + .rsvd = 0xfa, + .ro = 0x5, + },{ .name = "RPLL_TO_XPD_CTRL", .addr = A_RPLL_TO_XPD_CTRL, + .reset = 0x2000100, + .rsvd = 0xfdfc00ff, + },{ .name = "LPD_TOP_SWITCH_CTRL", .addr = A_LPD_TOP_SWITCH_CTRL, + .reset = 0x6000300, + .rsvd = 0xf9fc00f8, + },{ .name = "LPD_LSBUS_CTRL", .addr = A_LPD_LSBUS_CTRL, + .reset = 0x2000800, + .rsvd = 0xfdfc00f8, + },{ .name = "CPU_R5_CTRL", .addr = A_CPU_R5_CTRL, + .reset = 0xe000300, + .rsvd = 0xe1fc00f8, + },{ .name = "IOU_SWITCH_CTRL", .addr = A_IOU_SWITCH_CTRL, + .reset = 0x2000500, + .rsvd = 0xfdfc00f8, + },{ .name = "GEM0_REF_CTRL", .addr = A_GEM0_REF_CTRL, + .reset = 0xe000a00, + .rsvd = 0xf1fc00f8, + },{ .name = "GEM1_REF_CTRL", .addr = A_GEM1_REF_CTRL, + .reset = 0xe000a00, + .rsvd = 0xf1fc00f8, + },{ .name = "GEM_TSU_REF_CTRL", .addr = A_GEM_TSU_REF_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "USB0_BUS_REF_CTRL", .addr = A_USB0_BUS_REF_CTRL, + .reset = 0x2001900, + .rsvd = 0xfdfc00f8, + },{ .name = "UART0_REF_CTRL", .addr = A_UART0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "UART1_REF_CTRL", .addr = A_UART1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "SPI0_REF_CTRL", .addr = A_SPI0_REF_CTRL, + .reset = 0x600, + .rsvd = 0xfdfc00f8, + },{ .name = "SPI1_REF_CTRL", .addr = A_SPI1_REF_CTRL, + .reset = 0x600, + .rsvd = 0xfdfc00f8, + },{ .name = "CAN0_REF_CTRL", .addr = A_CAN0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "CAN1_REF_CTRL", .addr = A_CAN1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "I2C0_REF_CTRL", .addr = A_I2C0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "I2C1_REF_CTRL", .addr = A_I2C1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "DBG_LPD_CTRL", .addr = A_DBG_LPD_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "TIMESTAMP_REF_CTRL", .addr = A_TIMESTAMP_REF_CTRL, + .reset = 0x2000c00, + .rsvd = 0xfdfc00f8, + },{ .name = "CRL_SAFETY_CHK", .addr = A_CRL_SAFETY_CHK, + },{ .name = "PSM_REF_CTRL", .addr = A_PSM_REF_CTRL, + .reset = 0xf04, + .rsvd = 0xfffc00f8, + },{ .name = "DBG_TSTMP_CTRL", .addr = A_DBG_TSTMP_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "CPM_TOPSW_REF_CTRL", .addr = A_CPM_TOPSW_REF_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "USB3_DUAL_REF_CTRL", .addr = A_USB3_DUAL_REF_CTRL, + .reset = 0x3c00, + .rsvd = 0xfdfc00f8, + },{ .name = "RST_CPU_R5", .addr = A_RST_CPU_R5, + .reset = 0x17, + .rsvd = 0x8, + .pre_write = crl_rst_r5_prew, + },{ .name = "RST_ADMA", .addr = A_RST_ADMA, + .reset = 0x1, + .pre_write = crl_rst_adma_prew, + },{ .name = "RST_GEM0", .addr = A_RST_GEM0, + .reset = 0x1, + .pre_write = crl_rst_gem0_prew, + },{ .name = "RST_GEM1", .addr = A_RST_GEM1, + .reset = 0x1, + .pre_write = crl_rst_gem1_prew, + },{ .name = "RST_SPARE", .addr = A_RST_SPARE, + .reset = 0x1, + },{ .name = "RST_USB0", .addr = A_RST_USB0, + .reset = 0x1, + .pre_write = crl_rst_usb_prew, + },{ .name = "RST_UART0", .addr = A_RST_UART0, + .reset = 0x1, + .pre_write = crl_rst_uart0_prew, + },{ .name = "RST_UART1", .addr = A_RST_UART1, + .reset = 0x1, + .pre_write = crl_rst_uart1_prew, + },{ .name = "RST_SPI0", .addr = A_RST_SPI0, + .reset = 0x1, + },{ .name = "RST_SPI1", .addr = A_RST_SPI1, + .reset = 0x1, + },{ .name = "RST_CAN0", .addr = A_RST_CAN0, + .reset = 0x1, + },{ .name = "RST_CAN1", .addr = A_RST_CAN1, + .reset = 0x1, + },{ .name = "RST_I2C0", .addr = A_RST_I2C0, + .reset = 0x1, + },{ .name = "RST_I2C1", .addr = A_RST_I2C1, + .reset = 0x1, + },{ .name = "RST_DBG_LPD", .addr = A_RST_DBG_LPD, + .reset = 0x33, + .rsvd = 0xcc, + },{ .name = "RST_GPIO", .addr = A_RST_GPIO, + .reset = 0x1, + },{ .name = "RST_TTC", .addr = A_RST_TTC, + .reset = 0xf, + },{ .name = "RST_TIMESTAMP", .addr = A_RST_TIMESTAMP, + .reset = 0x1, + },{ .name = "RST_SWDT", .addr = A_RST_SWDT, + .reset = 0x1, + },{ .name = "RST_OCM", .addr = A_RST_OCM, + },{ .name = "RST_IPI", .addr = A_RST_IPI, + },{ .name = "RST_FPD", .addr = A_RST_FPD, + .reset = 0x3, + },{ .name = "PSM_RST_MODE", .addr = A_PSM_RST_MODE, + .reset = 0x1, + .rsvd = 0xf8, + } +}; + +static void crl_reset_enter(Object *obj, ResetType type) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } +} + +static void crl_reset_hold(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + + crl_update_irq(s); +} + +static const MemoryRegionOps crl_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void crl_init(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + int i; + + s->reg_array = + register_init_block32(DEVICE(obj), crl_regs_info, + ARRAY_SIZE(crl_regs_info), + s->regs_info, s->regs, + &crl_ops, + XLNX_VERSAL_CRL_ERR_DEBUG, + CRL_R_MAX * 4); + sysbus_init_mmio(sbd, &s->reg_array->mem); + sysbus_init_irq(sbd, &s->irq); + + for (i = 0; i < ARRAY_SIZE(s->cfg.cpu_r5); ++i) { + object_property_add_link(obj, "cpu_r5[*]", TYPE_ARM_CPU, + (Object **)&s->cfg.cpu_r5[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.adma); ++i) { + object_property_add_link(obj, "adma[*]", TYPE_DEVICE, + (Object **)&s->cfg.adma[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.uart); ++i) { + object_property_add_link(obj, "uart[*]", TYPE_DEVICE, + (Object **)&s->cfg.uart[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.gem); ++i) { + object_property_add_link(obj, "gem[*]", TYPE_DEVICE, + (Object **)&s->cfg.gem[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + object_property_add_link(obj, "usb", TYPE_DEVICE, + (Object **)&s->cfg.gem[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); +} + +static void crl_finalize(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + register_finalize_block(s->reg_array); +} + +static const VMStateDescription vmstate_crl = { + .name = TYPE_XLNX_VERSAL_CRL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, XlnxVersalCRL, CRL_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void crl_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_crl; + + rc->phases.enter = crl_reset_enter; + rc->phases.hold = crl_reset_hold; +} + +static const TypeInfo crl_info = { + .name = TYPE_XLNX_VERSAL_CRL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxVersalCRL), + .class_init = crl_class_init, + .instance_init = crl_init, + .instance_finalize = crl_finalize, +}; + +static void crl_register_types(void) +{ + type_register_static(&crl_info); +} + +type_init(crl_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c')) softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c')) specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-crf.c')) specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-apu-ctrl.c')) +specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-crl.c')) softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files( 'xlnx-versal-xramc.c', 'xlnx-versal-pmc-iou-slcr.c', -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Connect the CRL (Clock Reset LPD) to the Versal SoC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-5-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 4 +++ hw/arm/xlnx-versal.c | 54 ++++++++++++++++++++++++++++++++++-- 2 files changed, 56 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/xlnx-versal-efuse.h" #include "hw/ssi/xlnx-versal-ospi.h" #include "hw/dma/xlnx_csu_dma.h" +#include "hw/misc/xlnx-versal-crl.h" #include "hw/misc/xlnx-versal-pmc-iou-slcr.h" #define TYPE_XLNX_VERSAL "xlnx-versal" @@ -XXX,XX +XXX,XX @@ struct Versal { qemu_or_irq irq_orgate; XlnxXramCtrl ctrl[XLNX_VERSAL_NR_XRAM]; } xram; + + XlnxVersalCRL crl; } lpd; /* The Platform Management Controller subsystem. */ @@ -XXX,XX +XXX,XX @@ struct Versal { #define VERSAL_TIMER_NS_EL1_IRQ 14 #define VERSAL_TIMER_NS_EL2_IRQ 10 +#define VERSAL_CRL_IRQ 10 #define VERSAL_UART0_IRQ_0 18 #define VERSAL_UART1_IRQ_0 19 #define VERSAL_USB0_IRQ_0 22 diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_ospi(Versal *s, qemu_irq *pic) qdev_connect_gpio_out(orgate, 0, pic[VERSAL_OSPI_IRQ]); } +static void versal_create_crl(Versal *s, qemu_irq *pic) +{ + SysBusDevice *sbd; + int i; + + object_initialize_child(OBJECT(s), "crl", &s->lpd.crl, + TYPE_XLNX_VERSAL_CRL); + sbd = SYS_BUS_DEVICE(&s->lpd.crl); + + for (i = 0; i < ARRAY_SIZE(s->lpd.rpu.cpu); i++) { + g_autofree gchar *name = g_strdup_printf("cpu_r5[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.rpu.cpu[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.gem); i++) { + g_autofree gchar *name = g_strdup_printf("gem[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.gem[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.adma); i++) { + g_autofree gchar *name = g_strdup_printf("adma[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.adma[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.uart); i++) { + g_autofree gchar *name = g_strdup_printf("uart[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.uart[i]), + &error_abort); + } + + object_property_set_link(OBJECT(&s->lpd.crl), + "usb", OBJECT(&s->lpd.iou.usb), + &error_abort); + + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(&s->mr_ps, MM_CRL, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, pic[VERSAL_CRL_IRQ]); +} + /* This takes the board allocated linear DDR memory and creates aliases * for each split DDR range/aperture on the Versal address map. */ @@ -XXX,XX +XXX,XX @@ static void versal_unimp(Versal *s) versal_unimp_area(s, "psm", &s->mr_ps, MM_PSM_START, MM_PSM_END - MM_PSM_START); - versal_unimp_area(s, "crl", &s->mr_ps, - MM_CRL, MM_CRL_SIZE); versal_unimp_area(s, "crf", &s->mr_ps, MM_FPD_CRF, MM_FPD_CRF_SIZE); versal_unimp_area(s, "apu", &s->mr_ps, @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_efuse(s, pic); versal_create_pmc_iou_slcr(s, pic); versal_create_ospi(s, pic); + versal_create_crl(s, pic); versal_map_ddr(s); versal_unimp(s); -- 2.25.1 The Exynos4210 SoC device currently uses a custom device "exynos4210.irq_gate" to model the OR gate that feeds each CPU's IRQ line. We have a standard TYPE_OR_IRQ device for this now, so use that instead. (This is a migration compatibility break, but that is OK for this machine type.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-2-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 + hw/arm/exynos4210.c | 31 ++++++++++++++++--------------- 2 files changed, 17 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { MemoryRegion bootreg_mem; I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER]; qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; + qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) { Exynos4210State *s = EXYNOS4210_SOC(socdev); MemoryRegion *system_mem = get_system_memory(); - qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS]; SysBusDevice *busdev; DeviceState *dev, *uart[4], *pl330[3]; int i, n; @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) /* IRQ Gate */ for (i = 0; i < EXYNOS4210_NCPUS; i++) { - dev = qdev_new("exynos4210.irq_gate"); - qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS); - sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); - /* Get IRQ Gate input in gate_irq */ - for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) { - gate_irq[i][n] = qdev_get_gpio_in(dev, n); - } - busdev = SYS_BUS_DEVICE(dev); - - /* Connect IRQ Gate output to CPU's IRQ line */ - sysbus_connect_irq(busdev, 0, - qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); + DeviceState *orgate = DEVICE(&s->cpu_irq_orgate[i]); + object_property_set_int(OBJECT(orgate), "num-lines", + EXYNOS4210_IRQ_GATE_NINPUTS, + &error_abort); + qdev_realize(orgate, NULL, &error_abort); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); } /* Private memory region and Internal GIC */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { - sysbus_connect_irq(busdev, n, gate_irq[n][0]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) /* Map Distributer interface */ sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { - sysbus_connect_irq(busdev, n, gate_irq[n][1]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n); @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, name, orgate, TYPE_OR_IRQ); g_free(name); } + + for (i = 0; i < ARRAY_SIZE(s->cpu_irq_orgate); i++) { + g_autofree char *name = g_strdup_printf("cpu-irq-orgate%d", i); + object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); + } } static void exynos4210_class_init(ObjectClass *klass, void *data) -- 2.25.1 Now we have removed the only use of TYPE_EXYNOS4210_IRQ_GATE we can delete the device entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220404154658.565020-3-peter.maydell@linaro.org --- hw/intc/exynos4210_gic.c | 107 --------------------------------------- 1 file changed, 107 deletions(-) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_gic_register_types(void) } type_init(exynos4210_gic_register_types) - -/* IRQ OR Gate struct. - * - * This device models an OR gate. There are n_in input qdev gpio lines and one - * output sysbus IRQ line. The output IRQ level is formed as OR between all - * gpio inputs. - */ - -#define TYPE_EXYNOS4210_IRQ_GATE "exynos4210.irq_gate" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210IRQGateState, EXYNOS4210_IRQ_GATE) - -struct Exynos4210IRQGateState { - SysBusDevice parent_obj; - - uint32_t n_in; /* inputs amount */ - uint32_t *level; /* input levels */ - qemu_irq out; /* output IRQ */ -}; - -static Property exynos4210_irq_gate_properties[] = { - DEFINE_PROP_UINT32("n_in", Exynos4210IRQGateState, n_in, 1), - DEFINE_PROP_END_OF_LIST(), -}; - -static const VMStateDescription vmstate_exynos4210_irq_gate = { - .name = "exynos4210.irq_gate", - .version_id = 2, - .minimum_version_id = 2, - .fields = (VMStateField[]) { - VMSTATE_VBUFFER_UINT32(level, Exynos4210IRQGateState, 1, NULL, n_in), - VMSTATE_END_OF_LIST() - } -}; - -/* Process a change in IRQ input. */ -static void exynos4210_irq_gate_handler(void *opaque, int irq, int level) -{ - Exynos4210IRQGateState *s = (Exynos4210IRQGateState *)opaque; - uint32_t i; - - assert(irq < s->n_in); - - s->level[irq] = level; - - for (i = 0; i < s->n_in; i++) { - if (s->level[i] >= 1) { - qemu_irq_raise(s->out); - return; - } - } - - qemu_irq_lower(s->out); -} - -static void exynos4210_irq_gate_reset(DeviceState *d) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(d); - - memset(s->level, 0, s->n_in * sizeof(*s->level)); -} - -/* - * IRQ Gate initialization. - */ -static void exynos4210_irq_gate_init(Object *obj) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(obj); - SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - - sysbus_init_irq(sbd, &s->out); -} - -static void exynos4210_irq_gate_realize(DeviceState *dev, Error **errp) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(dev); - - /* Allocate general purpose input signals and connect a handler to each of - * them */ - qdev_init_gpio_in(dev, exynos4210_irq_gate_handler, s->n_in); - - s->level = g_malloc0(s->n_in * sizeof(*s->level)); -} - -static void exynos4210_irq_gate_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->reset = exynos4210_irq_gate_reset; - dc->vmsd = &vmstate_exynos4210_irq_gate; - device_class_set_props(dc, exynos4210_irq_gate_properties); - dc->realize = exynos4210_irq_gate_realize; -} - -static const TypeInfo exynos4210_irq_gate_info = { - .name = TYPE_EXYNOS4210_IRQ_GATE, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(Exynos4210IRQGateState), - .instance_init = exynos4210_irq_gate_init, - .class_init = exynos4210_irq_gate_class_init, -}; - -static void exynos4210_irq_gate_register_types(void) -{ - type_register_static(&exynos4210_irq_gate_info); -} - -type_init(exynos4210_irq_gate_register_types) -- 2.25.1 The exynos4210 SoC mostly creates its child devices as if it were board code. This includes the a9mpcore object. Switch that to a new-style "embedded in the state struct" creation, because in the next commit we're going to want to refer to the object again further down in the exynos4210_realize() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-4-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 ++ hw/arm/exynos4210.c | 11 ++++++----- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/sysbus.h" +#include "hw/cpu/a9mpcore.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER]; qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; + A9MPPrivState a9mpcore; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) } /* Private memory region and Internal GIC */ - dev = qdev_new(TYPE_A9MPCORE_PRIV); - qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->a9mpcore), "num-cpu", EXYNOS4210_NCPUS); + busdev = SYS_BUS_DEVICE(&s->a9mpcore); + sysbus_realize(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { - s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n); + s->irqs.int_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->a9mpcore), n); } /* Cache controller */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) g_autofree char *name = g_strdup_printf("cpu-irq-orgate%d", i); object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); } + + object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); } static void exynos4210_class_init(ObjectClass *klass, void *data) -- 2.25.1 The only time we use the int_gic_irq[] array in the Exynos4210Irq struct is in the exynos4210_realize() function: we initialize it with the GPIO inputs of the a9mpcore device, and then a bit later on we connect those to the outputs of the internal combiner. Now that the a9mpcore object is easily accessible as s->a9mpcore we can make the connection directly from one device to the other without going via this array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-5-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 - hw/arm/exynos4210.c | 6 ++---- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; - qemu_irq int_gic_irq[EXYNOS4210_INT_GIC_NIRQ]; qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; } Exynos4210Irq; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } - for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { - s->irqs.int_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->a9mpcore), n); - } /* Cache controller */ sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { - sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } exynos4210_combiner_get_gpioin(&s->irqs, dev, 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); -- 2.25.1 The exynos4210 code currently has two very similar arrays of IRQs: * board_irqs is a field of the Exynos4210Irq struct which is filled in by exynos4210_init_board_irqs() with the appropriate qemu_irqs for each IRQ the board/SoC can assert * irq_table is a set of qemu_irqs pointed to from the Exynos4210State struct. It's allocated in exynos4210_init_irq, and the only behaviour these irqs have is that they pass on the level to the equivalent board_irqs[] irq The extra indirection through irq_table is unnecessary, so coalesce these into a single irq_table[] array as a direct field in Exynos4210State which exynos4210_init_board_irqs() fills in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-6-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 8 ++------ hw/arm/exynos4210.c | 6 +----- hw/intc/exynos4210_gic.c | 32 ++++++++------------------------ 3 files changed, 11 insertions(+), 35 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; - qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; } Exynos4210Irq; struct Exynos4210State { @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { /*< public >*/ ARMCPU *cpu[EXYNOS4210_NCPUS]; Exynos4210Irq irqs; - qemu_irq *irq_table; + qemu_irq irq_table[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; MemoryRegion chipid_mem; MemoryRegion iram_mem; @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210State, EXYNOS4210_SOC) void exynos4210_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info); -/* Initialize exynos4210 IRQ subsystem stub */ -qemu_irq *exynos4210_init_irq(Exynos4210Irq *env); - /* Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs */ -void exynos4210_init_board_irqs(Exynos4210Irq *s); +void exynos4210_init_board_irqs(Exynos4210State *s); /* Get IRQ number from exynos4210 IRQ subsystem stub. * To identify IRQ source use internal combiner group and bit number diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); } - /*** IRQs ***/ - - s->irq_table = exynos4210_init_irq(&s->irqs); - /* IRQ Gate */ for (i = 0; i < EXYNOS4210_NCPUS; i++) { DeviceState *orgate = DEVICE(&s->cpu_irq_orgate[i]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ - exynos4210_init_board_irqs(&s->irqs); + exynos4210_init_board_irqs(s); /*** Memory ***/ diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64-EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -static void exynos4210_irq_handler(void *opaque, int irq, int level) -{ - Exynos4210Irq *s = (Exynos4210Irq *)opaque; - - /* Bypass */ - qemu_set_irq(s->board_irqs[irq], level); -} - -/* - * Initialize exynos4210 IRQ subsystem stub. - */ -qemu_irq *exynos4210_init_irq(Exynos4210Irq *s) -{ - return qemu_allocate_irqs(exynos4210_irq_handler, s, - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ); -} - /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. */ -void exynos4210_init_board_irqs(Exynos4210Irq *s) +void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; + Exynos4210Irq *is = &s->irqs; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ void exynos4210_init_board_irqs(Exynos4210Irq *s) irq_id = EXT_GIC_ID_MCT_G1; } if (irq_id) { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_gic_irq[irq_id-32]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); } else { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_combiner_irq[n]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { @@ -XXX,XX +XXX,XX @@ void exynos4210_init_board_irqs(Exynos4210Irq *s) EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; if (irq_id) { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_gic_irq[irq_id-32]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); } } } -- 2.25.1 Fix a missing set of spaces around '-' in the definition of combiner_grp_to_gic_id[]. We're about to move this code, so fix the style issue first to keep checkpatch happy with the code-motion patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-7-peter.maydell@linaro.org --- hw/intc/exynos4210_gic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ enum ExtInt { */ static const uint32_t -combiner_grp_to_gic_id[64-EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { +combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* int combiner groups 16-19 */ { }, { }, { }, { }, /* int combiner group 20 */ -- 2.25.1 The function exynos4210_init_board_irqs() currently lives in exynos4210_gic.c, but it isn't really part of the exynos4210.gic device -- it is a function that implements (some of) the wiring up of interrupts between the SoC's GIC and combiner components. This means it fits better in exynos4210.c, which is the SoC-level code. Move it there. Similarly, exynos4210_git_irq() is used almost only in the SoC-level code, so move it too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-8-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 4 - hw/arm/exynos4210.c | 202 +++++++++++++++++++++++++++++++++++ hw/intc/exynos4210_gic.c | 204 ------------------------------------ 3 files changed, 202 insertions(+), 208 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210State, EXYNOS4210_SOC) void exynos4210_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info); -/* Initialize board IRQs. - * These IRQs contain splitted Int/External Combiner and External Gic IRQs */ -void exynos4210_init_board_irqs(Exynos4210State *s); - /* Get IRQ number from exynos4210 IRQ subsystem stub. * To identify IRQ source use internal combiner group and bit number * grp - group number diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_PL330_BASE1_ADDR 0x12690000 #define EXYNOS4210_PL330_BASE2_ADDR 0x12850000 +enum ExtGicId { + EXT_GIC_ID_MDMA_LCD0 = 66, + EXT_GIC_ID_PDMA0, + EXT_GIC_ID_PDMA1, + EXT_GIC_ID_TIMER0, + EXT_GIC_ID_TIMER1, + EXT_GIC_ID_TIMER2, + EXT_GIC_ID_TIMER3, + EXT_GIC_ID_TIMER4, + EXT_GIC_ID_MCT_L0, + EXT_GIC_ID_WDT, + EXT_GIC_ID_RTC_ALARM, + EXT_GIC_ID_RTC_TIC, + EXT_GIC_ID_GPIO_XB, + EXT_GIC_ID_GPIO_XA, + EXT_GIC_ID_MCT_L1, + EXT_GIC_ID_IEM_APC, + EXT_GIC_ID_IEM_IEC, + EXT_GIC_ID_NFC, + EXT_GIC_ID_UART0, + EXT_GIC_ID_UART1, + EXT_GIC_ID_UART2, + EXT_GIC_ID_UART3, + EXT_GIC_ID_UART4, + EXT_GIC_ID_MCT_G0, + EXT_GIC_ID_I2C0, + EXT_GIC_ID_I2C1, + EXT_GIC_ID_I2C2, + EXT_GIC_ID_I2C3, + EXT_GIC_ID_I2C4, + EXT_GIC_ID_I2C5, + EXT_GIC_ID_I2C6, + EXT_GIC_ID_I2C7, + EXT_GIC_ID_SPI0, + EXT_GIC_ID_SPI1, + EXT_GIC_ID_SPI2, + EXT_GIC_ID_MCT_G1, + EXT_GIC_ID_USB_HOST, + EXT_GIC_ID_USB_DEVICE, + EXT_GIC_ID_MODEMIF, + EXT_GIC_ID_HSMMC0, + EXT_GIC_ID_HSMMC1, + EXT_GIC_ID_HSMMC2, + EXT_GIC_ID_HSMMC3, + EXT_GIC_ID_SDMMC, + EXT_GIC_ID_MIPI_CSI_4LANE, + EXT_GIC_ID_MIPI_DSI_4LANE, + EXT_GIC_ID_MIPI_CSI_2LANE, + EXT_GIC_ID_MIPI_DSI_2LANE, + EXT_GIC_ID_ONENAND_AUDI, + EXT_GIC_ID_ROTATOR, + EXT_GIC_ID_FIMC0, + EXT_GIC_ID_FIMC1, + EXT_GIC_ID_FIMC2, + EXT_GIC_ID_FIMC3, + EXT_GIC_ID_JPEG, + EXT_GIC_ID_2D, + EXT_GIC_ID_PCIe, + EXT_GIC_ID_MIXER, + EXT_GIC_ID_HDMI, + EXT_GIC_ID_HDMI_I2C, + EXT_GIC_ID_MFC, + EXT_GIC_ID_TVENC, +}; + +enum ExtInt { + EXT_GIC_ID_EXTINT0 = 48, + EXT_GIC_ID_EXTINT1, + EXT_GIC_ID_EXTINT2, + EXT_GIC_ID_EXTINT3, + EXT_GIC_ID_EXTINT4, + EXT_GIC_ID_EXTINT5, + EXT_GIC_ID_EXTINT6, + EXT_GIC_ID_EXTINT7, + EXT_GIC_ID_EXTINT8, + EXT_GIC_ID_EXTINT9, + EXT_GIC_ID_EXTINT10, + EXT_GIC_ID_EXTINT11, + EXT_GIC_ID_EXTINT12, + EXT_GIC_ID_EXTINT13, + EXT_GIC_ID_EXTINT14, + EXT_GIC_ID_EXTINT15 +}; + +/* + * External GIC sources which are not from External Interrupt Combiner or + * External Interrupts are starting from EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ, + * which is INTG16 in Internal Interrupt Combiner. + */ + +static const uint32_t +combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { + /* int combiner groups 16-19 */ + { }, { }, { }, { }, + /* int combiner group 20 */ + { 0, EXT_GIC_ID_MDMA_LCD0 }, + /* int combiner group 21 */ + { EXT_GIC_ID_PDMA0, EXT_GIC_ID_PDMA1 }, + /* int combiner group 22 */ + { EXT_GIC_ID_TIMER0, EXT_GIC_ID_TIMER1, EXT_GIC_ID_TIMER2, + EXT_GIC_ID_TIMER3, EXT_GIC_ID_TIMER4 }, + /* int combiner group 23 */ + { EXT_GIC_ID_RTC_ALARM, EXT_GIC_ID_RTC_TIC }, + /* int combiner group 24 */ + { EXT_GIC_ID_GPIO_XB, EXT_GIC_ID_GPIO_XA }, + /* int combiner group 25 */ + { EXT_GIC_ID_IEM_APC, EXT_GIC_ID_IEM_IEC }, + /* int combiner group 26 */ + { EXT_GIC_ID_UART0, EXT_GIC_ID_UART1, EXT_GIC_ID_UART2, EXT_GIC_ID_UART3, + EXT_GIC_ID_UART4 }, + /* int combiner group 27 */ + { EXT_GIC_ID_I2C0, EXT_GIC_ID_I2C1, EXT_GIC_ID_I2C2, EXT_GIC_ID_I2C3, + EXT_GIC_ID_I2C4, EXT_GIC_ID_I2C5, EXT_GIC_ID_I2C6, + EXT_GIC_ID_I2C7 }, + /* int combiner group 28 */ + { EXT_GIC_ID_SPI0, EXT_GIC_ID_SPI1, EXT_GIC_ID_SPI2 , EXT_GIC_ID_USB_HOST}, + /* int combiner group 29 */ + { EXT_GIC_ID_HSMMC0, EXT_GIC_ID_HSMMC1, EXT_GIC_ID_HSMMC2, + EXT_GIC_ID_HSMMC3, EXT_GIC_ID_SDMMC }, + /* int combiner group 30 */ + { EXT_GIC_ID_MIPI_CSI_4LANE, EXT_GIC_ID_MIPI_CSI_2LANE }, + /* int combiner group 31 */ + { EXT_GIC_ID_MIPI_DSI_4LANE, EXT_GIC_ID_MIPI_DSI_2LANE }, + /* int combiner group 32 */ + { EXT_GIC_ID_FIMC0, EXT_GIC_ID_FIMC1 }, + /* int combiner group 33 */ + { EXT_GIC_ID_FIMC2, EXT_GIC_ID_FIMC3 }, + /* int combiner group 34 */ + { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, + /* int combiner group 35 */ + { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* int combiner group 36 */ + { EXT_GIC_ID_MIXER }, + /* int combiner group 37 */ + { EXT_GIC_ID_EXTINT4, EXT_GIC_ID_EXTINT5, EXT_GIC_ID_EXTINT6, + EXT_GIC_ID_EXTINT7 }, + /* groups 38-50 */ + { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, + /* int combiner group 51 */ + { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* group 52 */ + { }, + /* int combiner group 53 */ + { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* groups 54-63 */ + { }, { }, { }, { }, { }, { }, { }, { }, { }, { } +}; + +/* + * Initialize board IRQs. + * These IRQs contain splitted Int/External Combiner and External Gic IRQs. + */ +static void exynos4210_init_board_irqs(Exynos4210State *s) +{ + uint32_t grp, bit, irq_id, n; + Exynos4210Irq *is = &s->irqs; + + for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { + irq_id = 0; + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || + n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { + /* MCT_G0 is passed to External GIC */ + irq_id = EXT_GIC_ID_MCT_G0; + } + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || + n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { + /* MCT_G1 is passed to External and GIC */ + irq_id = EXT_GIC_ID_MCT_G1; + } + if (irq_id) { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); + } else { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_combiner_irq[n]); + } + } + for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { + /* these IDs are passed to Internal Combiner and External GIC */ + grp = EXYNOS4210_COMBINER_GET_GRP_NUM(n); + bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); + irq_id = combiner_grp_to_gic_id[grp - + EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; + + if (irq_id) { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); + } + } +} + +/* + * Get IRQ number from exynos4210 IRQ subsystem stub. + * To identify IRQ source use internal combiner group and bit number + * grp - group number + * bit - bit number inside group + */ +uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) +{ + return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); +} + static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/exynos4210.h" #include "qom/object.h" -enum ExtGicId { - EXT_GIC_ID_MDMA_LCD0 = 66, - EXT_GIC_ID_PDMA0, - EXT_GIC_ID_PDMA1, - EXT_GIC_ID_TIMER0, - EXT_GIC_ID_TIMER1, - EXT_GIC_ID_TIMER2, - EXT_GIC_ID_TIMER3, - EXT_GIC_ID_TIMER4, - EXT_GIC_ID_MCT_L0, - EXT_GIC_ID_WDT, - EXT_GIC_ID_RTC_ALARM, - EXT_GIC_ID_RTC_TIC, - EXT_GIC_ID_GPIO_XB, - EXT_GIC_ID_GPIO_XA, - EXT_GIC_ID_MCT_L1, - EXT_GIC_ID_IEM_APC, - EXT_GIC_ID_IEM_IEC, - EXT_GIC_ID_NFC, - EXT_GIC_ID_UART0, - EXT_GIC_ID_UART1, - EXT_GIC_ID_UART2, - EXT_GIC_ID_UART3, - EXT_GIC_ID_UART4, - EXT_GIC_ID_MCT_G0, - EXT_GIC_ID_I2C0, - EXT_GIC_ID_I2C1, - EXT_GIC_ID_I2C2, - EXT_GIC_ID_I2C3, - EXT_GIC_ID_I2C4, - EXT_GIC_ID_I2C5, - EXT_GIC_ID_I2C6, - EXT_GIC_ID_I2C7, - EXT_GIC_ID_SPI0, - EXT_GIC_ID_SPI1, - EXT_GIC_ID_SPI2, - EXT_GIC_ID_MCT_G1, - EXT_GIC_ID_USB_HOST, - EXT_GIC_ID_USB_DEVICE, - EXT_GIC_ID_MODEMIF, - EXT_GIC_ID_HSMMC0, - EXT_GIC_ID_HSMMC1, - EXT_GIC_ID_HSMMC2, - EXT_GIC_ID_HSMMC3, - EXT_GIC_ID_SDMMC, - EXT_GIC_ID_MIPI_CSI_4LANE, - EXT_GIC_ID_MIPI_DSI_4LANE, - EXT_GIC_ID_MIPI_CSI_2LANE, - EXT_GIC_ID_MIPI_DSI_2LANE, - EXT_GIC_ID_ONENAND_AUDI, - EXT_GIC_ID_ROTATOR, - EXT_GIC_ID_FIMC0, - EXT_GIC_ID_FIMC1, - EXT_GIC_ID_FIMC2, - EXT_GIC_ID_FIMC3, - EXT_GIC_ID_JPEG, - EXT_GIC_ID_2D, - EXT_GIC_ID_PCIe, - EXT_GIC_ID_MIXER, - EXT_GIC_ID_HDMI, - EXT_GIC_ID_HDMI_I2C, - EXT_GIC_ID_MFC, - EXT_GIC_ID_TVENC, -}; - -enum ExtInt { - EXT_GIC_ID_EXTINT0 = 48, - EXT_GIC_ID_EXTINT1, - EXT_GIC_ID_EXTINT2, - EXT_GIC_ID_EXTINT3, - EXT_GIC_ID_EXTINT4, - EXT_GIC_ID_EXTINT5, - EXT_GIC_ID_EXTINT6, - EXT_GIC_ID_EXTINT7, - EXT_GIC_ID_EXTINT8, - EXT_GIC_ID_EXTINT9, - EXT_GIC_ID_EXTINT10, - EXT_GIC_ID_EXTINT11, - EXT_GIC_ID_EXTINT12, - EXT_GIC_ID_EXTINT13, - EXT_GIC_ID_EXTINT14, - EXT_GIC_ID_EXTINT15 -}; - -/* - * External GIC sources which are not from External Interrupt Combiner or - * External Interrupts are starting from EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ, - * which is INTG16 in Internal Interrupt Combiner. - */ - -static const uint32_t -combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { - /* int combiner groups 16-19 */ - { }, { }, { }, { }, - /* int combiner group 20 */ - { 0, EXT_GIC_ID_MDMA_LCD0 }, - /* int combiner group 21 */ - { EXT_GIC_ID_PDMA0, EXT_GIC_ID_PDMA1 }, - /* int combiner group 22 */ - { EXT_GIC_ID_TIMER0, EXT_GIC_ID_TIMER1, EXT_GIC_ID_TIMER2, - EXT_GIC_ID_TIMER3, EXT_GIC_ID_TIMER4 }, - /* int combiner group 23 */ - { EXT_GIC_ID_RTC_ALARM, EXT_GIC_ID_RTC_TIC }, - /* int combiner group 24 */ - { EXT_GIC_ID_GPIO_XB, EXT_GIC_ID_GPIO_XA }, - /* int combiner group 25 */ - { EXT_GIC_ID_IEM_APC, EXT_GIC_ID_IEM_IEC }, - /* int combiner group 26 */ - { EXT_GIC_ID_UART0, EXT_GIC_ID_UART1, EXT_GIC_ID_UART2, EXT_GIC_ID_UART3, - EXT_GIC_ID_UART4 }, - /* int combiner group 27 */ - { EXT_GIC_ID_I2C0, EXT_GIC_ID_I2C1, EXT_GIC_ID_I2C2, EXT_GIC_ID_I2C3, - EXT_GIC_ID_I2C4, EXT_GIC_ID_I2C5, EXT_GIC_ID_I2C6, - EXT_GIC_ID_I2C7 }, - /* int combiner group 28 */ - { EXT_GIC_ID_SPI0, EXT_GIC_ID_SPI1, EXT_GIC_ID_SPI2 , EXT_GIC_ID_USB_HOST}, - /* int combiner group 29 */ - { EXT_GIC_ID_HSMMC0, EXT_GIC_ID_HSMMC1, EXT_GIC_ID_HSMMC2, - EXT_GIC_ID_HSMMC3, EXT_GIC_ID_SDMMC }, - /* int combiner group 30 */ - { EXT_GIC_ID_MIPI_CSI_4LANE, EXT_GIC_ID_MIPI_CSI_2LANE }, - /* int combiner group 31 */ - { EXT_GIC_ID_MIPI_DSI_4LANE, EXT_GIC_ID_MIPI_DSI_2LANE }, - /* int combiner group 32 */ - { EXT_GIC_ID_FIMC0, EXT_GIC_ID_FIMC1 }, - /* int combiner group 33 */ - { EXT_GIC_ID_FIMC2, EXT_GIC_ID_FIMC3 }, - /* int combiner group 34 */ - { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, - /* int combiner group 35 */ - { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* int combiner group 36 */ - { EXT_GIC_ID_MIXER }, - /* int combiner group 37 */ - { EXT_GIC_ID_EXTINT4, EXT_GIC_ID_EXTINT5, EXT_GIC_ID_EXTINT6, - EXT_GIC_ID_EXTINT7 }, - /* groups 38-50 */ - { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, - /* int combiner group 51 */ - { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* group 52 */ - { }, - /* int combiner group 53 */ - { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* groups 54-63 */ - { }, { }, { }, { }, { }, { }, { }, { }, { }, { } -}; - #define EXYNOS4210_GIC_NIRQ 160 #define EXYNOS4210_EXT_GIC_CPU_REGION_SIZE 0x10000 @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -/* - * Initialize board IRQs. - * These IRQs contain splitted Int/External Combiner and External Gic IRQs. - */ -void exynos4210_init_board_irqs(Exynos4210State *s) -{ - uint32_t grp, bit, irq_id, n; - Exynos4210Irq *is = &s->irqs; - - for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { - irq_id = 0; - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { - /* MCT_G0 is passed to External GIC */ - irq_id = EXT_GIC_ID_MCT_G0; - } - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { - /* MCT_G1 is passed to External and GIC */ - irq_id = EXT_GIC_ID_MCT_G1; - } - if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); - } else { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_combiner_irq[n]); - } - } - for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { - /* these IDs are passed to Internal Combiner and External GIC */ - grp = EXYNOS4210_COMBINER_GET_GRP_NUM(n); - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - irq_id = combiner_grp_to_gic_id[grp - - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; - - if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); - } - } -} - -/* - * Get IRQ number from exynos4210 IRQ subsystem stub. - * To identify IRQ source use internal combiner group and bit number - * grp - group number - * bit - bit number inside group - */ -uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) -{ - return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); -} - -/********* GIC part *********/ - #define TYPE_EXYNOS4210_GIC "exynos4210.gic" OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) -- 2.25.1 Switch the creation of the external GIC to the new-style "embedded in state struct" approach, so we can easily refer to the object elsewhere during realize. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-9-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 ++ include/hw/intc/exynos4210_gic.h | 43 ++++++++++++++++++++++++++++++++ hw/arm/exynos4210.c | 10 ++++---- hw/intc/exynos4210_gic.c | 17 ++----------- MAINTAINERS | 2 +- 5 files changed, 53 insertions(+), 21 deletions(-) create mode 100644 include/hw/intc/exynos4210_gic.h diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" +#include "hw/intc/exynos4210_gic.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; + Exynos4210GicState ext_gic; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/include/hw/intc/exynos4210_gic.h b/include/hw/intc/exynos4210_gic.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/intc/exynos4210_gic.h @@ -XXX,XX +XXX,XX @@ +/* + * Samsung exynos4210 GIC implementation. Based on hw/arm_gic.c + * + * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. + * All rights reserved. + * + * Evgeny Voevodin <e.voevodin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HW_INTC_EXYNOS4210_GIC_H +#define HW_INTC_EXYNOS4210_GIC_H + +#include "hw/sysbus.h" + +#define TYPE_EXYNOS4210_GIC "exynos4210.gic" +OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) + +#define EXYNOS4210_GIC_NCPUS 2 + +struct Exynos4210GicState { + SysBusDevice parent_obj; + + MemoryRegion cpu_container; + MemoryRegion dist_container; + MemoryRegion cpu_alias[EXYNOS4210_GIC_NCPUS]; + MemoryRegion dist_alias[EXYNOS4210_GIC_NCPUS]; + uint32_t num_cpu; + DeviceState *gic; +}; + +#endif diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL); /* External GIC */ - dev = qdev_new("exynos4210.gic"); - qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->ext_gic), "num-cpu", EXYNOS4210_NCPUS); + busdev = SYS_BUS_DEVICE(&s->ext_gic); + sysbus_realize(busdev, &error_fatal); /* Map CPU interface */ sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR); /* Map Distributer interface */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { - s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n); + s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->ext_gic), n); } /* Internal Interrupt Combiner */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) } object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); + object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); } static void exynos4210_class_init(ObjectClass *klass, void *data) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "hw/irq.h" #include "hw/qdev-properties.h" +#include "hw/intc/exynos4210_gic.h" #include "hw/arm/exynos4210.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -#define TYPE_EXYNOS4210_GIC "exynos4210.gic" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) - -struct Exynos4210GicState { - SysBusDevice parent_obj; - - MemoryRegion cpu_container; - MemoryRegion dist_container; - MemoryRegion cpu_alias[EXYNOS4210_NCPUS]; - MemoryRegion dist_alias[EXYNOS4210_NCPUS]; - uint32_t num_cpu; - DeviceState *gic; -}; - static void exynos4210_gic_set_irq(void *opaque, int irq, int level) { Exynos4210GicState *s = (Exynos4210GicState *)opaque; @@ -XXX,XX +XXX,XX @@ static void exynos4210_gic_realize(DeviceState *dev, Error **errp) * enough room for the cpu numbers. gcc 9.2.1 on 32-bit x86 * doesn't figure this out, otherwise and gives spurious warnings. */ - assert(n <= EXYNOS4210_NCPUS); + assert(n <= EXYNOS4210_GIC_NCPUS); for (i = 0; i < n; i++) { /* Map CPU interface per SMP Core */ sprintf(cpu_alias_name, "%s%x", cpu_prefix, i); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/*/exynos* -F: include/hw/arm/exynos4210.h +F: include/hw/*/exynos* Calxeda Highbank M: Rob Herring <robh@kernel.org> -- 2.25.1 The only time we use the ext_gic_irq[] array in the Exynos4210Irq struct is during realize of the SoC -- we initialize it with the input IRQs of the external GIC device, and then connect those to outputs of other devices further on in realize (including in the exynos4210_init_board_irqs() function). Now that the ext_gic object is easily accessible as s->ext_gic we can make the connections directly from one device to the other without going via this array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-10-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 - hw/arm/exynos4210.c | 12 ++++++------ 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; - qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; } Exynos4210Irq; struct Exynos4210State { diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; Exynos4210Irq *is = &s->irqs; + DeviceState *extgicdev = DEVICE(&s->ext_gic); for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) } if (irq_id) { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); + qdev_get_gpio_in(extgicdev, + irq_id - 32)); } else { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], is->ext_combiner_irq[n]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) if (irq_id) { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); + qdev_get_gpio_in(extgicdev, + irq_id - 32)); } } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } - for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { - s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->ext_gic), n); - } /* Internal Interrupt Combiner */ dev = qdev_new("exynos4210.combiner"); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { - sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]); + sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } exynos4210_combiner_get_gpioin(&s->irqs, dev, 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); -- 2.25.1 The function exynos4210_combiner_get_gpioin() currently lives in exynos4210_combiner.c, but it isn't really part of the combiner device itself -- it is a function that implements the wiring up of some interrupt sources to multiple combiner inputs. Move it to live with the other SoC-level code in exynos4210.c, along with a few macros previously defined in exynos4210.h which are now used only in exynos4210.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-11-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 11 ----- hw/arm/exynos4210.c | 82 +++++++++++++++++++++++++++++++++++ hw/intc/exynos4210_combiner.c | 77 -------------------------------- 3 files changed, 82 insertions(+), 88 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \ (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8) -#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp)*8 + (bit)) -#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) -#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ - ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) - /* IRQs number for external and internal GIC */ #define EXYNOS4210_EXT_GIC_NIRQ (160-32) #define EXYNOS4210_INT_GIC_NIRQ 64 @@ -XXX,XX +XXX,XX @@ void exynos4210_write_secondary(ARMCPU *cpu, * bit - bit number inside group */ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit); -/* - * Get Combiner input GPIO into irqs structure - */ -void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, - int ext); - /* * exynos4210 UART */ diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { { }, { }, { }, { }, { }, { }, { }, { }, { }, { } }; +#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp) * 8 + (bit)) +#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) +#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ + ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) + /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. @@ -XXX,XX +XXX,XX @@ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); } +/* + * Get Combiner input GPIO into irqs structure + */ +static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, + DeviceState *dev, int ext) +{ + int n; + int bit; + int max; + qemu_irq *irq; + + max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : + EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; + irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; + + /* + * Some IRQs of Int/External Combiner are going to two Combiners groups, + * so let split them. + */ + for (n = 0; n < max; n++) { + + bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); + + switch (n) { + /* MDNIE_LCD1 INTG1 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); + continue; + + /* TMU INTG3 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); + continue; + + /* LCD1 INTG12 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); + continue; + + /* Multi-Core Timer INTG12 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG35 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG51 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG53 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + } + + irq[n] = qdev_get_gpio_in(dev, n); + } +} + static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; diff --git a/hw/intc/exynos4210_combiner.c b/hw/intc/exynos4210_combiner.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_combiner.c +++ b/hw/intc/exynos4210_combiner.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_exynos4210_combiner = { } }; -/* - * Get Combiner input GPIO into irqs structure - */ -void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, - int ext) -{ - int n; - int bit; - int max; - qemu_irq *irq; - - max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; - irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - - /* - * Some IRQs of Int/External Combiner are going to two Combiners groups, - * so let split them. - */ - for (n = 0; n < max; n++) { - - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - - switch (n) { - /* MDNIE_LCD1 INTG1 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); - continue; - - /* TMU INTG3 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); - continue; - - /* LCD1 INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); - continue; - - /* Multi-Core Timer INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG35 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG51 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG53 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - } - - irq[n] = qdev_get_gpio_in(dev, n); - } -} - static uint64_t exynos4210_combiner_read(void *opaque, hwaddr offset, unsigned size) { -- 2.25.1 Delete a couple of #defines which are never used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-12-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \ (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8) -/* IRQs number for external and internal GIC */ -#define EXYNOS4210_EXT_GIC_NIRQ (160-32) -#define EXYNOS4210_INT_GIC_NIRQ 64 - #define EXYNOS4210_I2C_NUMBER 9 #define EXYNOS4210_NUM_DMA 3 -- 2.25.1 In exynos4210_init_board_irqs(), use the TYPE_SPLIT_IRQ device instead of qemu_irq_split(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-13-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 9 ++++++++ hw/arm/exynos4210.c | 41 +++++++++++++++++++++++++++++-------- 2 files changed, 42 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" #include "hw/intc/exynos4210_gic.h" +#include "hw/core/split-irq.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_NUM_DMA 3 +/* + * We need one splitter for every external combiner input, plus + * one for every non-zero entry in combiner_grp_to_gic_id[]. + * We'll assert in exynos4210_init_board_irqs() if this is wrong. + */ +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 60) + typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; Exynos4210GicState ext_gic; + SplitIRQ splitter[EXYNOS4210_NUM_SPLITTERS]; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) uint32_t grp, bit, irq_id, n; Exynos4210Irq *is = &s->irqs; DeviceState *extgicdev = DEVICE(&s->ext_gic); + int splitcount = 0; + DeviceState *splitter; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) /* MCT_G1 is passed to External and GIC */ irq_id = EXT_GIC_ID_MCT_G1; } + + assert(splitcount < EXYNOS4210_NUM_SPLITTERS); + splitter = DEVICE(&s->splitter[splitcount]); + qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_realize(splitter, NULL, &error_abort); + splitcount++; + s->irq_table[n] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - qdev_get_gpio_in(extgicdev, - irq_id - 32)); + qdev_connect_gpio_out(splitter, 1, + qdev_get_gpio_in(extgicdev, irq_id - 32)); } else { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - qdev_get_gpio_in(extgicdev, - irq_id - 32)); + assert(splitcount < EXYNOS4210_NUM_SPLITTERS); + splitter = DEVICE(&s->splitter[splitcount]); + qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_realize(splitter, NULL, &error_abort); + splitcount++; + s->irq_table[n] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, + qdev_get_gpio_in(extgicdev, irq_id - 32)); } } + /* + * We check this here to avoid a more obscure assert later when + * qdev_assert_realized_properly() checks that we realized every + * child object we initialized. + */ + assert(splitcount == EXYNOS4210_NUM_SPLITTERS); } /* @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); } + for (i = 0; i < ARRAY_SIZE(s->splitter); i++) { + g_autofree char *name = g_strdup_printf("irq-splitter%d", i); + object_initialize_child(obj, name, &s->splitter[i], TYPE_SPLIT_IRQ); + } + object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); } -- 2.25.1 In exynos4210_init_board_irqs(), the loop that handles IRQ lines that are in a range that applies to the internal combiner only creates a splitter for those interrupts which go to both the internal combiner and to the external GIC, but it does nothing at all for the interrupts which don't go to the external GIC, leaving the irq_table[] array element empty for those. (This will result in those interrupts simply being lost, not in a QEMU crash.) I don't have a reliable datasheet for this SoC, but since we do wire up one interrupt line in this category (the HDMI I2C device on interrupt 16,1), this seems like it must be a bug in the existing QEMU code. Fill in the irq_table[] entries where we're not splitting the IRQ to both the internal combiner and the external GIC with the IRQ line of the internal combiner. (That is, these IRQ lines go to just one device, not multiple.) This bug didn't have any visible guest effects because the only implemented device that was affected was the HDMI I2C controller, and we never connect any I2C devices to that bus. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-14-peter.maydell@linaro.org --- hw/arm/exynos4210.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); qdev_connect_gpio_out(splitter, 1, qdev_get_gpio_in(extgicdev, irq_id - 32)); + } else { + s->irq_table[n] = is->int_combiner_irq[n]; } } /* -- 2.25.1 Currently for the interrupts MCT_G0 and MCT_G1 which are the only ones in the input range of the external combiner and which are also wired to the external GIC, we connect them only to the internal combiner and the external GIC. This seems likely to be a bug, as all other interrupts which are in the input range of both combiners are connected to both combiners. (The fact that the code in exynos4210_combiner_get_gpioin() is also trying to wire up these inputs on both combiners also suggests this.) Wire these interrupts up to both combiners, like the rest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-15-peter.maydell@linaro.org --- hw/arm/exynos4210.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); - qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_prop_set_uint16(splitter, "num-lines", irq_id ? 3 : 2); qdev_realize(splitter, NULL, &error_abort); splitcount++; s->irq_table[n] = qdev_get_gpio_in(splitter, 0); qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); if (irq_id) { - qdev_connect_gpio_out(splitter, 1, + qdev_connect_gpio_out(splitter, 2, qdev_get_gpio_in(extgicdev, irq_id - 32)); - } else { - qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { -- 2.25.1 The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0 and EXT_GIC_ID_MCT_G1 multiple times. This means that we will connect multiple IRQs up to the same external GIC input, which is not permitted. We do the same thing in the code in exynos4210_init_board_irqs() because the conditionals selecting an irq_id in the first loop match multiple interrupt IDs. Overall we do this for interrupt IDs (1, 4), (12, 4), (35, 4), (51, 4), (53, 4) for EXT_GIC_ID_MCT_G0 and (1, 5), (12, 5), (35, 5), (51, 5), (53, 5) for EXT_GIC_ID_MCT_G1 These correspond to the cases for the multi-core timer that we are wiring up to multiple inputs on the combiner in exynos4210_combiner_get_gpioin(). That code already deals with all these interrupt IDs being the same input source, so we don't need to connect the external GIC interrupt for any of them except the first (1, 4) and (1, 5). Remove the array entries and conditionals which were incorrectly causing us to wire up extra lines. This bug didn't cause any visible effects, because we only connect up a device to the "primary" ID values (1, 4) and (1, 5), so the extra lines would never be set to a level. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-16-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 +- hw/arm/exynos4210.c | 12 +++++------- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ * one for every non-zero entry in combiner_grp_to_gic_id[]. * We'll assert in exynos4210_init_board_irqs() if this is wrong. */ -#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 60) +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 54) typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* int combiner group 34 */ { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, /* int combiner group 35 */ - { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { 0, 0, 0, EXT_GIC_ID_MCT_L1 }, /* int combiner group 36 */ { EXT_GIC_ID_MIXER }, /* int combiner group 37 */ @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* groups 38-50 */ { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, /* int combiner group 51 */ - { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { EXT_GIC_ID_MCT_L0 }, /* group 52 */ { }, /* int combiner group 53 */ - { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { EXT_GIC_ID_WDT }, /* groups 54-63 */ { }, { }, { }, { }, { }, { }, { }, { }, { }, { } }; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4)) { /* MCT_G0 is passed to External GIC */ irq_id = EXT_GIC_ID_MCT_G0; } - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5)) { /* MCT_G1 is passed to External and GIC */ irq_id = EXT_GIC_ID_MCT_G1; } -- 2.25.1 At this point, the function exynos4210_init_board_irqs() splits input IRQ lines to connect them to the input combiner, output combiner and external GIC. The function exynos4210_combiner_get_gpioin() splits some of the combiner input lines further to connect them to multiple different inputs on the combiner. Because (unlike qemu_irq_split()) the TYPE_SPLIT_IRQ device has a configurable number of outputs, we can do all this in one place, by making exynos4210_init_board_irqs() add extra outputs to the splitter device when it must be connected to more than one input on each combiner. We do this with a new data structure, the combinermap, which is an array each of whose elements is a list of the interrupt IDs on the combiner which must be tied together. As we loop through each interrupt ID, if we find that it is the first one in one of these lists, we configure the splitter device with eonugh extra outputs and wire them up to the other interrupt IDs in the list. Conveniently, for all the cases where this is necessary, the lowest-numbered interrupt ID in each group is in the range of the external combiner, so we only need to code for this in the first of the two loops in exynos4210_init_board_irqs(). The old code in exynos4210_combiner_get_gpioin() which is being deleted here had several problems which don't exist in the new code in its handling of the multi-core timer interrupts: (1) the case labels specified bits 4 ... 8, but bit '8' doesn't exist; these should have been 4 ... 7 (2) it used the input irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)] multiple times as the input of several different splitters, which isn't allowed (3) in an apparent cut-and-paste error, the cases for all the multi-core timer inputs used "bit + 4" even though the bit range for the case was (intended to be) 4 ... 7, which meant it was looking at non-existent bits 8 ... 11. None of these exist in the new code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-17-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 6 +- hw/arm/exynos4210.c | 178 +++++++++++++++++++++++------------- 2 files changed, 119 insertions(+), 65 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ /* * We need one splitter for every external combiner input, plus - * one for every non-zero entry in combiner_grp_to_gic_id[]. + * one for every non-zero entry in combiner_grp_to_gic_id[], + * minus one for every external combiner ID in second or later + * places in a combinermap[] line. * We'll assert in exynos4210_init_board_irqs() if this is wrong. */ -#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 54) +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 38) typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) +/* + * Some interrupt lines go to multiple combiner inputs. + * This data structure defines those: each array element is + * a list of combiner inputs which are connected together; + * the one with the smallest interrupt ID value must be first. + * As with combiner_grp_to_gic_id[], we rely on (0, 0) not being + * wired to anything so we can use 0 as a terminator. + */ +#define IRQNO(G, B) EXYNOS4210_COMBINER_GET_IRQ_NUM(G, B) +#define IRQNONE 0 + +#define COMBINERMAP_SIZE 16 + +static const int combinermap[COMBINERMAP_SIZE][6] = { + /* MDNIE_LCD1 */ + { IRQNO(0, 4), IRQNO(1, 0), IRQNONE }, + { IRQNO(0, 5), IRQNO(1, 1), IRQNONE }, + { IRQNO(0, 6), IRQNO(1, 2), IRQNONE }, + { IRQNO(0, 7), IRQNO(1, 3), IRQNONE }, + /* TMU */ + { IRQNO(2, 4), IRQNO(3, 4), IRQNONE }, + { IRQNO(2, 5), IRQNO(3, 5), IRQNONE }, + { IRQNO(2, 6), IRQNO(3, 6), IRQNONE }, + { IRQNO(2, 7), IRQNO(3, 7), IRQNONE }, + /* LCD1 */ + { IRQNO(11, 4), IRQNO(12, 0), IRQNONE }, + { IRQNO(11, 5), IRQNO(12, 1), IRQNONE }, + { IRQNO(11, 6), IRQNO(12, 2), IRQNONE }, + { IRQNO(11, 7), IRQNO(12, 3), IRQNONE }, + /* Multi-core timer */ + { IRQNO(1, 4), IRQNO(12, 4), IRQNO(35, 4), IRQNO(51, 4), IRQNO(53, 4), IRQNONE }, + { IRQNO(1, 5), IRQNO(12, 5), IRQNO(35, 5), IRQNO(51, 5), IRQNO(53, 5), IRQNONE }, + { IRQNO(1, 6), IRQNO(12, 6), IRQNO(35, 6), IRQNO(51, 6), IRQNO(53, 6), IRQNONE }, + { IRQNO(1, 7), IRQNO(12, 7), IRQNO(35, 7), IRQNO(51, 7), IRQNO(53, 7), IRQNONE }, +}; + +#undef IRQNO + +static const int *combinermap_entry(int irq) +{ + /* + * If the interrupt number passed in is the first entry in some + * line of the combinermap, return a pointer to that line; + * otherwise return NULL. + */ + int i; + for (i = 0; i < COMBINERMAP_SIZE; i++) { + if (combinermap[i][0] == irq) { + return combinermap[i]; + } + } + return NULL; +} + +static int mapline_size(const int *mapline) +{ + /* Return number of entries in this mapline in total */ + int i = 0; + + if (!mapline) { + /* Not in the map? IRQ goes to exactly one combiner input */ + return 1; + } + while (*mapline != IRQNONE) { + mapline++; + i++; + } + return i; +} + /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) DeviceState *extgicdev = DEVICE(&s->ext_gic); int splitcount = 0; DeviceState *splitter; + const int *mapline; + int numlines, splitin, in; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) irq_id = EXT_GIC_ID_MCT_G1; } + if (s->irq_table[n]) { + /* + * This must be some non-first entry in a combinermap line, + * and we've already filled it in. + */ + continue; + } + mapline = combinermap_entry(n); + /* + * We need to connect the IRQ to multiple inputs on both combiners + * and possibly also to the external GIC. + */ + numlines = 2 * mapline_size(mapline); + if (irq_id) { + numlines++; + } assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); - qdev_prop_set_uint16(splitter, "num-lines", irq_id ? 3 : 2); + qdev_prop_set_uint16(splitter, "num-lines", numlines); qdev_realize(splitter, NULL, &error_abort); splitcount++; - s->irq_table[n] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); - qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); + + in = n; + splitin = 0; + for (;;) { + s->irq_table[in] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, splitin, is->int_combiner_irq[in]); + qdev_connect_gpio_out(splitter, splitin + 1, is->ext_combiner_irq[in]); + splitin += 2; + if (!mapline) { + break; + } + mapline++; + in = *mapline; + if (in == IRQNONE) { + break; + } + } if (irq_id) { - qdev_connect_gpio_out(splitter, 2, + qdev_connect_gpio_out(splitter, splitin, qdev_get_gpio_in(extgicdev, irq_id - 32)); } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) irq_id = combiner_grp_to_gic_id[grp - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; + if (s->irq_table[n]) { + /* + * This must be some non-first entry in a combinermap line, + * and we've already filled it in. + */ + continue; + } + if (irq_id) { assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, int ext) { int n; - int bit; int max; qemu_irq *irq; @@ -XXX,XX +XXX,XX @@ static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - /* - * Some IRQs of Int/External Combiner are going to two Combiners groups, - * so let split them. - */ for (n = 0; n < max; n++) { - - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - - switch (n) { - /* MDNIE_LCD1 INTG1 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); - continue; - - /* TMU INTG3 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); - continue; - - /* LCD1 INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); - continue; - - /* Multi-Core Timer INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG35 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG51 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG53 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - } - irq[n] = qdev_get_gpio_in(dev, n); } } -- 2.25.1 Switch the creation of the combiner devices to the new-style "embedded in state struct" approach, so we can easily refer to the object elsewhere during realize. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-18-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 3 ++ include/hw/intc/exynos4210_combiner.h | 57 +++++++++++++++++++++++++++ hw/arm/exynos4210.c | 20 +++++----- hw/intc/exynos4210_combiner.c | 31 +-------------- 4 files changed, 72 insertions(+), 39 deletions(-) create mode 100644 include/hw/intc/exynos4210_combiner.h diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" #include "hw/intc/exynos4210_gic.h" +#include "hw/intc/exynos4210_combiner.h" #include "hw/core/split-irq.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; Exynos4210GicState ext_gic; + Exynos4210CombinerState int_combiner; + Exynos4210CombinerState ext_combiner; SplitIRQ splitter[EXYNOS4210_NUM_SPLITTERS]; }; diff --git a/include/hw/intc/exynos4210_combiner.h b/include/hw/intc/exynos4210_combiner.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/intc/exynos4210_combiner.h @@ -XXX,XX +XXX,XX @@ +/* + * Samsung exynos4210 Interrupt Combiner + * + * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. + * All rights reserved. + * + * Evgeny Voevodin <e.voevodin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_INTC_EXYNOS4210_COMBINER +#define HW_INTC_EXYNOS4210_COMBINER + +#include "hw/sysbus.h" + +/* + * State for each output signal of internal combiner + */ +typedef struct CombinerGroupState { + uint8_t src_mask; /* 1 - source enabled, 0 - disabled */ + uint8_t src_pending; /* Pending source interrupts before masking */ +} CombinerGroupState; + +#define TYPE_EXYNOS4210_COMBINER "exynos4210.combiner" +OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210CombinerState, EXYNOS4210_COMBINER) + +/* Number of groups and total number of interrupts for the internal combiner */ +#define IIC_NGRP 64 +#define IIC_NIRQ (IIC_NGRP * 8) +#define IIC_REGSET_SIZE 0x41 + +struct Exynos4210CombinerState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + struct CombinerGroupState group[IIC_NGRP]; + uint32_t reg_set[IIC_REGSET_SIZE]; + uint32_t icipsr[2]; + uint32_t external; /* 1 means that this combiner is external */ + + qemu_irq output_irq[IIC_NGRP]; +}; + +#endif diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) } /* Internal Interrupt Combiner */ - dev = qdev_new("exynos4210.combiner"); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + busdev = SYS_BUS_DEVICE(&s->int_combiner); + sysbus_realize(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, dev, 0); + exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->int_combiner), 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); /* External Interrupt Combiner */ - dev = qdev_new("exynos4210.combiner"); - qdev_prop_set_uint32(dev, "external", 1); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->ext_combiner), "external", 1); + busdev = SYS_BUS_DEVICE(&s->ext_combiner); + sysbus_realize(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, dev, 1); + exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->ext_combiner), 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); + object_initialize_child(obj, "int-combiner", &s->int_combiner, + TYPE_EXYNOS4210_COMBINER); + object_initialize_child(obj, "ext-combiner", &s->ext_combiner, + TYPE_EXYNOS4210_COMBINER); } static void exynos4210_class_init(ObjectClass *klass, void *data) diff --git a/hw/intc/exynos4210_combiner.c b/hw/intc/exynos4210_combiner.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_combiner.c +++ b/hw/intc/exynos4210_combiner.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/module.h" - +#include "hw/intc/exynos4210_combiner.h" #include "hw/arm/exynos4210.h" #include "hw/hw.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ #define DPRINTF(fmt, ...) do {} while (0) #endif -#define IIC_NGRP 64 /* Internal Interrupt Combiner - Groups number */ -#define IIC_NIRQ (IIC_NGRP * 8)/* Internal Interrupt Combiner - Interrupts number */ #define IIC_REGION_SIZE 0x108 /* Size of memory mapped region */ -#define IIC_REGSET_SIZE 0x41 - -/* - * State for each output signal of internal combiner - */ -typedef struct CombinerGroupState { - uint8_t src_mask; /* 1 - source enabled, 0 - disabled */ - uint8_t src_pending; /* Pending source interrupts before masking */ -} CombinerGroupState; - -#define TYPE_EXYNOS4210_COMBINER "exynos4210.combiner" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210CombinerState, EXYNOS4210_COMBINER) - -struct Exynos4210CombinerState { - SysBusDevice parent_obj; - - MemoryRegion iomem; - - struct CombinerGroupState group[IIC_NGRP]; - uint32_t reg_set[IIC_REGSET_SIZE]; - uint32_t icipsr[2]; - uint32_t external; /* 1 means that this combiner is external */ - - qemu_irq output_irq[IIC_NGRP]; -}; static const VMStateDescription vmstate_exynos4210_combiner_group_state = { .name = "exynos4210.combiner.groupstate", -- 2.25.1 The only time we use the int_combiner_irq[] and ext_combiner_irq[] arrays in the Exynos4210Irq struct is during realize of the SoC -- we initialize them with the input IRQs of the combiner devices, and then connect those to outputs of other devices in exynos4210_init_board_irqs(). Now that the combiner objects are easily accessible as s->int_combiner and s->ext_combiner we can make the connections directly from one device to the other without going via these arrays. Since these are the only two remaining elements of Exynos4210Irq, we can remove that struct entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-19-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 6 ------ hw/arm/exynos4210.c | 34 ++++++++-------------------------- 2 files changed, 8 insertions(+), 32 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ */ #define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 38) -typedef struct Exynos4210Irq { - qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; - qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; -} Exynos4210Irq; - struct Exynos4210State { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ ARMCPU *cpu[EXYNOS4210_NCPUS]; - Exynos4210Irq irqs; qemu_irq irq_table[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; MemoryRegion chipid_mem; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static int mapline_size(const int *mapline) static void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; - Exynos4210Irq *is = &s->irqs; DeviceState *extgicdev = DEVICE(&s->ext_gic); + DeviceState *intcdev = DEVICE(&s->int_combiner); + DeviceState *extcdev = DEVICE(&s->ext_combiner); int splitcount = 0; DeviceState *splitter; const int *mapline; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) splitin = 0; for (;;) { s->irq_table[in] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, splitin, is->int_combiner_irq[in]); - qdev_connect_gpio_out(splitter, splitin + 1, is->ext_combiner_irq[in]); + qdev_connect_gpio_out(splitter, splitin, + qdev_get_gpio_in(intcdev, in)); + qdev_connect_gpio_out(splitter, splitin + 1, + qdev_get_gpio_in(extcdev, in)); splitin += 2; if (!mapline) { break; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) qdev_realize(splitter, NULL, &error_abort); splitcount++; s->irq_table[n] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 0, qdev_get_gpio_in(intcdev, n)); qdev_connect_gpio_out(splitter, 1, qdev_get_gpio_in(extgicdev, irq_id - 32)); } else { - s->irq_table[n] = is->int_combiner_irq[n]; + s->irq_table[n] = qdev_get_gpio_in(intcdev, n); } } /* @@ -XXX,XX +XXX,XX @@ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); } -/* - * Get Combiner input GPIO into irqs structure - */ -static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, - DeviceState *dev, int ext) -{ - int n; - int max; - qemu_irq *irq; - - max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; - irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - - for (n = 0; n < max; n++) { - irq[n] = qdev_get_gpio_in(dev, n); - } -} - static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->int_combiner), 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); /* External Interrupt Combiner */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->ext_combiner), 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-2-zongyuan.li@smartx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/realview.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/boot.h" #include "hw/arm/primecell.h" +#include "hw/core/split-irq.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" +#include "hw/qdev-core.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ static const int realview_board_id[] = { 0x76d }; +static void split_irq_from_named(DeviceState *src, const char* outname, + qemu_irq out1, qemu_irq out2) { + DeviceState *splitter = qdev_new(TYPE_SPLIT_IRQ); + + qdev_prop_set_uint32(splitter, "num-lines", 2); + + qdev_realize_and_unref(splitter, NULL, &error_fatal); + + qdev_connect_gpio_out(splitter, 0, out1); + qdev_connect_gpio_out(splitter, 1, out2); + qdev_connect_gpio_out_named(src, outname, 0, + qdev_get_gpio_in(splitter, 0)); +} + static void realview_init(MachineState *machine, enum realview_board_type board_type) { @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, DeviceState *dev, *sysctl, *gpio2, *pl041; SysBusDevice *busdev; qemu_irq pic[64]; - qemu_irq mmc_irq[2]; PCIBus *pci_bus = NULL; NICInfo *nd; DriveInfo *dinfo; @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, * and the PL061 has them the other way about. Also the card * detect line is inverted. */ - mmc_irq[0] = qemu_irq_split( - qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), - qdev_get_gpio_in(gpio2, 1)); - mmc_irq[1] = qemu_irq_split( - qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), - qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); - qdev_connect_gpio_out_named(dev, "card-read-only", 0, mmc_irq[0]); - qdev_connect_gpio_out_named(dev, "card-inserted", 0, mmc_irq[1]); + split_irq_from_named(dev, "card-read-only", + qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), + qdev_get_gpio_in(gpio2, 1)); + + split_irq_from_named(dev, "card-inserted", + qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), + qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); + dinfo = drive_get(IF_SD, 0, 0); if (dinfo) { DeviceState *card; -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-3-zongyuan.li@smartx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" +#include "hw/core/split-irq.h" #include "hw/sysbus.h" #include "hw/sd/sd.h" #include "hw/ssi/ssi.h" @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *ssddev; DriveInfo *dinfo; DeviceState *carddev; + DeviceState *gpio_d_splitter; BlockBackend *blk; /* @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) &error_fatal); ssddev = ssi_create_peripheral(bus, "ssd0323"); - gpio_out[GPIO_D][0] = qemu_irq_split( - qdev_get_gpio_in_named(sddev, SSI_GPIO_CS, 0), + + gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ); + qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2); + qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal); + qdev_connect_gpio_out( + gpio_d_splitter, 0, + qdev_get_gpio_in_named(sddev, SSI_GPIO_CS, 0)); + qdev_connect_gpio_out( + gpio_d_splitter, 1, qdev_get_gpio_in_named(ssddev, SSI_GPIO_CS, 0)); + gpio_out[GPIO_D][0] = qdev_get_gpio_in(gpio_d_splitter, 0); + gpio_out[GPIO_C][7] = qdev_get_gpio_in(ssddev, 0); /* Make sure the select pin is high. */ -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-5-zongyuan.li@smartx.com Resolves: https://gitlab.com/qemu-project/qemu/-/issues/811 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/irq.h | 5 ----- hw/core/irq.c | 15 --------------- 2 files changed, 20 deletions(-) diff --git a/include/hw/irq.h b/include/hw/irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -XXX,XX +XXX,XX @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs. - * It's probably better to use the TYPE_SPLIT_IRQ device instead. - */ -qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); - /* For internal use in qtest. Similar to qemu_irq_split, but operating on an existing vector of qemu_irq. */ void qemu_irq_intercept_in(qemu_irq *gpio_in, qemu_irq_handler handler, int n); diff --git a/hw/core/irq.c b/hw/core/irq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/irq.c +++ b/hw/core/irq.c @@ -XXX,XX +XXX,XX @@ qemu_irq qemu_irq_invert(qemu_irq irq) return qemu_allocate_irq(qemu_notirq, irq, 0); } -static void qemu_splitirq(void *opaque, int line, int level) -{ - struct IRQState **irq = opaque; - irq[0]->handler(irq[0]->opaque, irq[0]->n, level); - irq[1]->handler(irq[1]->opaque, irq[1]->n, level); -} - -qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2) -{ - qemu_irq *s = g_new0(qemu_irq, 2); - s[0] = irq1; - s[1] = irq2; - return qemu_allocate_irq(qemu_splitirq, s, 0); -} - void qemu_irq_intercept_in(qemu_irq *gpio_in, qemu_irq_handler handler, int n) { int i; -- 2.25.1 From: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Describe that the gic-version influences the maximum number of CPUs. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Message-id: 20220413231456.35811-1-heinrich.schuchardt@canonical.com [PMM: minor punctuation tweaks] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ gic-version Valid values are: ``2`` - GICv2 + GICv2. Note that this limits the number of CPUs to 8. ``3`` - GICv3 + GICv3. This allows up to 512 CPUs. ``host`` Use the same GIC version the host provides, when using KVM ``max`` -- 2.25.1 From: Hao Wu <wuhaotsh@google.com> Similar to the Aspeed code in include/misc/aspeed_scu.h, we define the PWRON STRAP fields in their corresponding module for NPCM7XX. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20220411165842.3912945-2-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm7xx_gcr.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "hw/sysbus.h" +/* + * NPCM7XX PWRON STRAP bit fields + * 12: SPI0 powered by VSBV3 at 1.8V + * 11: System flash attached to BMC + * 10: BSP alternative pins. + * 9:8: Flash UART command route enabled. + * 7: Security enabled. + * 6: HI-Z state control. + * 5: ECC disabled. + * 4: Reserved + * 3: JTAG2 enabled. + * 2:0: CPU and DRAM clock frequency. + */ +#define NPCM7XX_PWRON_STRAP_SPI0F18 BIT(12) +#define NPCM7XX_PWRON_STRAP_SFAB BIT(11) +#define NPCM7XX_PWRON_STRAP_BSPA BIT(10) +#define NPCM7XX_PWRON_STRAP_FUP(x) ((x) << 8) +#define FUP_NORM_UART2 3 +#define FUP_PROG_UART3 2 +#define FUP_PROG_UART2 1 +#define FUP_NORM_UART3 0 +#define NPCM7XX_PWRON_STRAP_SECEN BIT(7) +#define NPCM7XX_PWRON_STRAP_HIZ BIT(6) +#define NPCM7XX_PWRON_STRAP_ECC BIT(5) +#define NPCM7XX_PWRON_STRAP_RESERVE1 BIT(4) +#define NPCM7XX_PWRON_STRAP_J2EN BIT(3) +#define NPCM7XX_PWRON_STRAP_CKFRQ(x) (x) +#define CKFRQ_SKIPINIT 0x000 +#define CKFRQ_DEFAULT 0x111 + /* * Number of registers in our device state structure. Don't change this without * incrementing the version_id in the vmstate. -- 2.25.1 From: Hao Wu <wuhaotsh@google.com> This patch uses the defined fields to describe PWRON STRAPs for better readability. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20220411165842.3912945-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/npcm7xx_boards.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "sysemu/block-backend.h" -#define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7 -#define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff -#define QUANTA_GBS_POWER_ON_STRAPS 0x000017ff -#define KUDO_BMC_POWER_ON_STRAPS 0x00001fff -#define MORI_BMC_POWER_ON_STRAPS 0x00001fff +#define NPCM7XX_POWER_ON_STRAPS_DEFAULT ( \ + NPCM7XX_PWRON_STRAP_SPI0F18 | \ + NPCM7XX_PWRON_STRAP_SFAB | \ + NPCM7XX_PWRON_STRAP_BSPA | \ + NPCM7XX_PWRON_STRAP_FUP(FUP_NORM_UART2) | \ + NPCM7XX_PWRON_STRAP_SECEN | \ + NPCM7XX_PWRON_STRAP_HIZ | \ + NPCM7XX_PWRON_STRAP_ECC | \ + NPCM7XX_PWRON_STRAP_RESERVE1 | \ + NPCM7XX_PWRON_STRAP_J2EN | \ + NPCM7XX_PWRON_STRAP_CKFRQ(CKFRQ_DEFAULT)) + +#define NPCM750_EVB_POWER_ON_STRAPS ( \ + NPCM7XX_POWER_ON_STRAPS_DEFAULT & ~NPCM7XX_PWRON_STRAP_J2EN) +#define QUANTA_GSJ_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT +#define QUANTA_GBS_POWER_ON_STRAPS ( \ + NPCM7XX_POWER_ON_STRAPS_DEFAULT & ~NPCM7XX_PWRON_STRAP_SFAB) +#define KUDO_BMC_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT +#define MORI_BMC_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT static const char npcm7xx_default_bootrom[] = "npcm7xx_bootrom.bin"; -- 2.25.1 I might squeeze in another pullreq before softfreeze, but the queue was already big enough that I wanted to send this lot out now. -- PMM The following changes since commit 4abf70a661a5df3886ac9d7c19c3617fa92b922a: Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-06-24' into staging (2020-07-03 15:34:45 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200703 for you to fetch changes up to 0f10bf84a9d489259a5b11c6aa1b05c1175b76ea: Deprecate TileGX port (2020-07-03 16:59:46 +0100) ---------------------------------------------------------------- target-arm queue: * i.MX6UL EVK board: put PHYs in the correct places * hw/arm/virt: Let the virtio-iommu bypass MSIs * target/arm: kvm: Handle DABT with no valid ISS * hw/arm/virt-acpi-build: Only expose flash on older machine types * target/arm: Fix temp double-free in sve ldr/str * hw/display/bcm2835_fb.c: Initialize all fields of struct * hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak * Deprecate TileGX port ---------------------------------------------------------------- Andrew Jones (4): tests/acpi: remove stale allowed tables tests/acpi: virt: allow DSDT acpi table changes hw/arm/virt-acpi-build: Only expose flash on older machine types tests/acpi: virt: update golden masters for DSDT Beata Michalska (2): target/arm: kvm: Handle DABT with no valid ISS target/arm: kvm: Handle misconfigured dabt injection Eric Auger (5): qdev: Introduce DEFINE_PROP_RESERVED_REGION virtio-iommu: Implement RESV_MEM probe request virtio-iommu: Handle reserved regions in the translation process virtio-iommu-pci: Add array of Interval properties hw/arm/virt: Let the virtio-iommu bypass MSIs Jean-Christophe Dubois (3): Add a phy-num property to the i.MX FEC emulator Add the ability to select a different PHY for each i.MX6UL FEC interface Select MDIO device 2 and 1 as PHY devices for i.MX6UL EVK board. Peter Maydell (19): hw/display/bcm2835_fb.c: Initialize all fields of struct hw/arm/spitz: Detabify hw/arm/spitz: Create SpitzMachineClass abstract base class hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals hw/misc/max111x: provide QOM properties for setting initial values hw/misc/max111x: Don't use vmstate_register() ssi: Add ssi_realize_and_unref() hw/arm/spitz: Use max111x properties to set initial values hw/misc/max111x: Use GPIO lines rather than max111x_set_input() hw/misc/max111x: Create header file for documentation, TYPE_ macros hw/arm/spitz: Encapsulate misc GPIO handling in a device hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg Replace uses of FROM_SSI_SLAVE() macro with QOM casts Deprecate TileGX port Richard Henderson (1): target/arm: Fix temp double-free in sve ldr/str docs/system/deprecated.rst | 11 + include/exec/memory.h | 6 + include/hw/arm/fsl-imx6ul.h | 2 + include/hw/arm/pxa.h | 1 - include/hw/arm/sharpsl.h | 3 - include/hw/arm/virt.h | 8 + include/hw/misc/max111x.h | 56 +++ include/hw/net/imx_fec.h | 1 + include/hw/qdev-properties.h | 3 + include/hw/ssi/ssi.h | 31 +- include/hw/virtio/virtio-iommu.h | 2 + include/qemu/typedefs.h | 1 + target/arm/cpu.h | 2 + target/arm/kvm_arm.h | 10 + target/arm/translate-a64.h | 1 + tests/qtest/bios-tables-test-allowed-diff.h | 18 - hw/arm/fsl-imx6ul.c | 10 + hw/arm/mcimx6ul-evk.c | 2 + hw/arm/pxa2xx_pic.c | 9 +- hw/arm/spitz.c | 507 ++++++++++++++++------------ hw/arm/virt-acpi-build.c | 5 +- hw/arm/virt.c | 33 ++ hw/arm/z2.c | 11 +- hw/core/qdev-properties.c | 89 +++++ hw/display/ads7846.c | 9 +- hw/display/bcm2835_fb.c | 4 + hw/display/ssd0323.c | 10 +- hw/gpio/zaurus.c | 12 +- hw/misc/max111x.c | 86 +++-- hw/net/imx_fec.c | 24 +- hw/sd/ssi-sd.c | 4 +- hw/ssi/ssi.c | 7 +- hw/virtio/virtio-iommu-pci.c | 11 + hw/virtio/virtio-iommu.c | 114 ++++++- target/arm/kvm.c | 80 +++++ target/arm/kvm32.c | 34 ++ target/arm/kvm64.c | 49 +++ target/arm/translate-a64.c | 6 + target/arm/translate-sve.c | 8 +- MAINTAINERS | 1 + hw/net/trace-events | 4 +- hw/virtio/trace-events | 1 + tests/data/acpi/virt/DSDT | Bin 5307 -> 5205 bytes tests/data/acpi/virt/DSDT.memhp | Bin 6668 -> 6566 bytes tests/data/acpi/virt/DSDT.numamem | Bin 5307 -> 5205 bytes 45 files changed, 974 insertions(+), 312 deletions(-) create mode 100644 include/hw/misc/max111x.h From: Jean-Christophe Dubois <jcd@tribudubois.net> We need a solution to use an Ethernet PHY that is not the first device on the MDIO bus (device 0 on MDIO bus). As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but only one MDIO bus on which the 2 related PHY are connected but at unique addresses. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/net/imx_fec.h | 1 + hw/net/imx_fec.c | 24 +++++++++++++++++------- hw/net/trace-events | 4 ++-- 3 files changed, 20 insertions(+), 9 deletions(-) diff --git a/include/hw/net/imx_fec.h b/include/hw/net/imx_fec.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/net/imx_fec.h +++ b/include/hw/net/imx_fec.h @@ -XXX,XX +XXX,XX @@ typedef struct IMXFECState { uint32_t phy_advertise; uint32_t phy_int; uint32_t phy_int_mask; + uint32_t phy_num; bool is_fec; diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/imx_fec.c +++ b/hw/net/imx_fec.c @@ -XXX,XX +XXX,XX @@ static void imx_phy_reset(IMXFECState *s) static uint32_t imx_phy_read(IMXFECState *s, int reg) { uint32_t val; + uint32_t phy = reg / 32; - if (reg > 31) { - /* we only advertise one phy */ + if (phy != s->phy_num) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n", + TYPE_IMX_FEC, __func__, phy); return 0; } + reg %= 32; + switch (reg) { case 0: /* Basic Control */ val = s->phy_control; @@ -XXX,XX +XXX,XX @@ static uint32_t imx_phy_read(IMXFECState *s, int reg) break; } - trace_imx_phy_read(val, reg); + trace_imx_phy_read(val, phy, reg); return val; } static void imx_phy_write(IMXFECState *s, int reg, uint32_t val) { - trace_imx_phy_write(val, reg); + uint32_t phy = reg / 32; - if (reg > 31) { - /* we only advertise one phy */ + if (phy != s->phy_num) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s.phy]%s: Bad phy num %u\n", + TYPE_IMX_FEC, __func__, phy); return; } + reg %= 32; + + trace_imx_phy_write(val, phy, reg); + switch (reg) { case 0: /* Basic Control */ if (val & 0x8000) { @@ -XXX,XX +XXX,XX @@ static void imx_eth_write(void *opaque, hwaddr offset, uint64_t value, extract32(value, 18, 10))); } else { - /* This a write operation */ + /* This is a write operation */ imx_phy_write(s, extract32(value, 18, 10), extract32(value, 0, 16)); } /* raise the interrupt as the PHY operation is done */ @@ -XXX,XX +XXX,XX @@ static void imx_eth_realize(DeviceState *dev, Error **errp) static Property imx_eth_properties[] = { DEFINE_NIC_PROPERTIES(IMXFECState, conf), DEFINE_PROP_UINT32("tx-ring-num", IMXFECState, tx_ring_num, 1), + DEFINE_PROP_UINT32("phy-num", IMXFECState, phy_num, 0), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/net/trace-events b/hw/net/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/net/trace-events +++ b/hw/net/trace-events @@ -XXX,XX +XXX,XX @@ i82596_set_multicast(uint16_t count) "Added %d multicast entries" i82596_channel_attention(void *s) "%p: Received CHANNEL ATTENTION" # imx_fec.c -imx_phy_read(uint32_t val, int reg) "0x%04"PRIx32" <= reg[%d]" -imx_phy_write(uint32_t val, int reg) "0x%04"PRIx32" => reg[%d]" +imx_phy_read(uint32_t val, int phy, int reg) "0x%04"PRIx32" <= phy[%d].reg[%d]" +imx_phy_write(uint32_t val, int phy, int reg) "0x%04"PRIx32" => phy[%d].reg[%d]" imx_phy_update_link(const char *s) "%s" imx_phy_reset(void) "" imx_fec_read_bd(uint64_t addr, int flags, int len, int data) "tx_bd 0x%"PRIx64" flags 0x%04x len %d data 0x%08x" -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> Add properties to the i.MX6UL processor to be able to select a particular PHY on the MDIO bus for each FEC device. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: ea1d604198b6b73ea6521676e45bacfc597aba53.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 ++ hw/arm/fsl-imx6ul.c | 10 ++++++++++ 2 files changed, 12 insertions(+) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ typedef struct FslIMX6ULState { MemoryRegion caam; MemoryRegion ocram; MemoryRegion ocram_alias; + + uint32_t phy_num[FSL_IMX6UL_NUM_ETHS]; } FslIMX6ULState; enum FslIMX6ULMemoryMap { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENET2_TIMER_IRQ, }; + object_property_set_uint(OBJECT(&s->eth[i]), + s->phy_num[i], + "phy-num", &error_abort); object_property_set_uint(OBJECT(&s->eth[i]), FSL_IMX6UL_ETH_NUM_TX_RINGS, "tx-ring-num", &error_abort); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias); } +static Property fsl_imx6ul_properties[] = { + DEFINE_PROP_UINT32("fec1-phy-num", FslIMX6ULState, phy_num[0], 0), + DEFINE_PROP_UINT32("fec2-phy-num", FslIMX6ULState, phy_num[1], 1), + DEFINE_PROP_END_OF_LIST(), +}; + static void fsl_imx6ul_class_init(ObjectClass *oc, void *data) { DeviceClass *dc = DEVICE_CLASS(oc); + device_class_set_props(dc, fsl_imx6ul_properties); dc->realize = fsl_imx6ul_realize; dc->desc = "i.MX6UL SOC"; /* Reason: Uses serial_hds and nd_table in realize() directly */ -- 2.20.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The i.MX6UL EVK 14x14 board uses: - PHY 2 for FEC 1 - PHY 1 for FEC 2 Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: fb41992126c091a71d76ab3d1898959091f60583.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/mcimx6ul-evk.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/mcimx6ul-evk.c b/hw/arm/mcimx6ul-evk.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mcimx6ul-evk.c +++ b/hw/arm/mcimx6ul-evk.c @@ -XXX,XX +XXX,XX @@ static void mcimx6ul_evk_init(MachineState *machine) s = FSL_IMX6UL(object_new(TYPE_FSL_IMX6UL)); object_property_add_child(OBJECT(machine), "soc", OBJECT(s)); + object_property_set_uint(OBJECT(s), 2, "fec1-phy-num", &error_fatal); + object_property_set_uint(OBJECT(s), 1, "fec2-phy-num", &error_fatal); qdev_realize(DEVICE(s), NULL, &error_fatal); memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_MMDC_ADDR, -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> Introduce a new property defining a reserved region: <low address>:<high address>:<type>. This will be used to encode reserved IOVA regions. For instance, in virtio-iommu use case, reserved IOVA regions will be passed by the machine code to the virtio-iommu-pci device (an array of those). The type of the reserved region will match the virtio_iommu_probe_resv_mem subtype value: - VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0) - VIRTIO_IOMMU_RESV_MEM_T_MSI (1) on PC/Q35 machine, this will be used to inform the virtio-iommu-pci device it should bypass the MSI region. The reserved region will be: 0xfee00000:0xfeefffff:1. On ARM, we can declare the ITS MSI doorbell as an MSI region to prevent MSIs from being mapped on guest side. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/exec/memory.h | 6 +++ include/hw/qdev-properties.h | 3 ++ include/qemu/typedefs.h | 1 + hw/core/qdev-properties.c | 89 ++++++++++++++++++++++++++++++++++++ 4 files changed, 99 insertions(+) diff --git a/include/exec/memory.h b/include/exec/memory.h index XXXXXXX..XXXXXXX 100644 --- a/include/exec/memory.h +++ b/include/exec/memory.h @@ -XXX,XX +XXX,XX @@ extern bool global_dirty_log; typedef struct MemoryRegionOps MemoryRegionOps; +struct ReservedRegion { + hwaddr low; + hwaddr high; + unsigned type; +}; + typedef struct IOMMUTLBEntry IOMMUTLBEntry; /* See address_space_translate: bit 0 is read, bit 1 is write. */ diff --git a/include/hw/qdev-properties.h b/include/hw/qdev-properties.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-properties.h +++ b/include/hw/qdev-properties.h @@ -XXX,XX +XXX,XX @@ extern const PropertyInfo qdev_prop_string; extern const PropertyInfo qdev_prop_chr; extern const PropertyInfo qdev_prop_tpm; extern const PropertyInfo qdev_prop_macaddr; +extern const PropertyInfo qdev_prop_reserved_region; extern const PropertyInfo qdev_prop_on_off_auto; extern const PropertyInfo qdev_prop_multifd_compression; extern const PropertyInfo qdev_prop_losttickpolicy; @@ -XXX,XX +XXX,XX @@ extern const PropertyInfo qdev_prop_pcie_link_width; DEFINE_PROP(_n, _s, _f, qdev_prop_drive_iothread, BlockBackend *) #define DEFINE_PROP_MACADDR(_n, _s, _f) \ DEFINE_PROP(_n, _s, _f, qdev_prop_macaddr, MACAddr) +#define DEFINE_PROP_RESERVED_REGION(_n, _s, _f) \ + DEFINE_PROP(_n, _s, _f, qdev_prop_reserved_region, ReservedRegion) #define DEFINE_PROP_ON_OFF_AUTO(_n, _s, _f, _d) \ DEFINE_PROP_SIGNED(_n, _s, _f, _d, qdev_prop_on_off_auto, OnOffAuto) #define DEFINE_PROP_MULTIFD_COMPRESSION(_n, _s, _f, _d) \ diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct ISABus ISABus; typedef struct ISADevice ISADevice; typedef struct IsaDma IsaDma; typedef struct MACAddr MACAddr; +typedef struct ReservedRegion ReservedRegion; typedef struct MachineClass MachineClass; typedef struct MachineState MachineState; typedef struct MemoryListener MemoryListener; diff --git a/hw/core/qdev-properties.c b/hw/core/qdev-properties.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev-properties.c +++ b/hw/core/qdev-properties.c @@ -XXX,XX +XXX,XX @@ #include "chardev/char.h" #include "qemu/uuid.h" #include "qemu/units.h" +#include "qemu/cutils.h" void qdev_prop_set_after_realize(DeviceState *dev, const char *name, Error **errp) @@ -XXX,XX +XXX,XX @@ const PropertyInfo qdev_prop_macaddr = { .set = set_mac, }; +/* --- Reserved Region --- */ + +/* + * Accepted syntax: + * <low address>:<high address>:<type> + * where low/high addresses are uint64_t in hexadecimal + * and type is a non-negative decimal integer + */ +static void get_reserved_region(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + DeviceState *dev = DEVICE(obj); + Property *prop = opaque; + ReservedRegion *rr = qdev_get_prop_ptr(dev, prop); + char buffer[64]; + char *p = buffer; + int rc; + + rc = snprintf(buffer, sizeof(buffer), "0x%"PRIx64":0x%"PRIx64":%u", + rr->low, rr->high, rr->type); + assert(rc < sizeof(buffer)); + + visit_type_str(v, name, &p, errp); +} + +static void set_reserved_region(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + DeviceState *dev = DEVICE(obj); + Property *prop = opaque; + ReservedRegion *rr = qdev_get_prop_ptr(dev, prop); + Error *local_err = NULL; + const char *endptr; + char *str; + int ret; + + if (dev->realized) { + qdev_prop_set_after_realize(dev, name, errp); + return; + } + + visit_type_str(v, name, &str, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + + ret = qemu_strtou64(str, &endptr, 16, &rr->low); + if (ret) { + error_setg(errp, "start address of '%s'" + " must be a hexadecimal integer", name); + goto out; + } + if (*endptr != ':') { + goto separator_error; + } + + ret = qemu_strtou64(endptr + 1, &endptr, 16, &rr->high); + if (ret) { + error_setg(errp, "end address of '%s'" + " must be a hexadecimal integer", name); + goto out; + } + if (*endptr != ':') { + goto separator_error; + } + + ret = qemu_strtoui(endptr + 1, &endptr, 10, &rr->type); + if (ret) { + error_setg(errp, "type of '%s'" + " must be a non-negative decimal integer", name); + } + goto out; + +separator_error: + error_setg(errp, "reserved region fields must be separated with ':'"); +out: + g_free(str); + return; +} + +const PropertyInfo qdev_prop_reserved_region = { + .name = "reserved_region", + .description = "Reserved Region, example: 0xFEE00000:0xFEEFFFFF:0", + .get = get_reserved_region, + .set = set_reserved_region, +}; + /* --- on/off/auto --- */ const PropertyInfo qdev_prop_on_off_auto = { -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> This patch implements the PROBE request. At the moment, only THE RESV_MEM property is handled. The first goal is to report iommu wide reserved regions such as the MSI regions set by the machine code. On x86 this will be the IOAPIC MSI region, [0xFEE00000 - 0xFEEFFFFF], on ARM this may be the ITS doorbell. In the future we may introduce per device reserved regions. This will be useful when protecting host assigned devices which may expose their own reserved regions Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/virtio/virtio-iommu.h | 2 + hw/virtio/virtio-iommu.c | 94 ++++++++++++++++++++++++++++++-- hw/virtio/trace-events | 1 + 3 files changed, 93 insertions(+), 4 deletions(-) diff --git a/include/hw/virtio/virtio-iommu.h b/include/hw/virtio/virtio-iommu.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/virtio/virtio-iommu.h +++ b/include/hw/virtio/virtio-iommu.h @@ -XXX,XX +XXX,XX @@ typedef struct VirtIOIOMMU { GHashTable *as_by_busptr; IOMMUPciBus *iommu_pcibus_by_bus_num[PCI_BUS_MAX]; PCIBus *primary_bus; + ReservedRegion *reserved_regions; + uint32_t nb_reserved_regions; GTree *domains; QemuMutex mutex; GTree *endpoints; diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu.c +++ b/hw/virtio/virtio-iommu.c @@ -XXX,XX +XXX,XX @@ /* Max size */ #define VIOMMU_DEFAULT_QUEUE_SIZE 256 +#define VIOMMU_PROBE_SIZE 512 typedef struct VirtIOIOMMUDomain { uint32_t id; @@ -XXX,XX +XXX,XX @@ static int virtio_iommu_unmap(VirtIOIOMMU *s, return ret; } +static ssize_t virtio_iommu_fill_resv_mem_prop(VirtIOIOMMU *s, uint32_t ep, + uint8_t *buf, size_t free) +{ + struct virtio_iommu_probe_resv_mem prop = {}; + size_t size = sizeof(prop), length = size - sizeof(prop.head), total; + int i; + + total = size * s->nb_reserved_regions; + + if (total > free) { + return -ENOSPC; + } + + for (i = 0; i < s->nb_reserved_regions; i++) { + unsigned subtype = s->reserved_regions[i].type; + + assert(subtype == VIRTIO_IOMMU_RESV_MEM_T_RESERVED || + subtype == VIRTIO_IOMMU_RESV_MEM_T_MSI); + prop.head.type = cpu_to_le16(VIRTIO_IOMMU_PROBE_T_RESV_MEM); + prop.head.length = cpu_to_le16(length); + prop.subtype = subtype; + prop.start = cpu_to_le64(s->reserved_regions[i].low); + prop.end = cpu_to_le64(s->reserved_regions[i].high); + + memcpy(buf, &prop, size); + + trace_virtio_iommu_fill_resv_property(ep, prop.subtype, + prop.start, prop.end); + buf += size; + } + return total; +} + +/** + * virtio_iommu_probe - Fill the probe request buffer with + * the properties the device is able to return + */ +static int virtio_iommu_probe(VirtIOIOMMU *s, + struct virtio_iommu_req_probe *req, + uint8_t *buf) +{ + uint32_t ep_id = le32_to_cpu(req->endpoint); + size_t free = VIOMMU_PROBE_SIZE; + ssize_t count; + + if (!virtio_iommu_mr(s, ep_id)) { + return VIRTIO_IOMMU_S_NOENT; + } + + count = virtio_iommu_fill_resv_mem_prop(s, ep_id, buf, free); + if (count < 0) { + return VIRTIO_IOMMU_S_INVAL; + } + buf += count; + free -= count; + + return VIRTIO_IOMMU_S_OK; +} + static int virtio_iommu_iov_to_req(struct iovec *iov, unsigned int iov_cnt, void *req, size_t req_sz) @@ -XXX,XX +XXX,XX @@ virtio_iommu_handle_req(detach) virtio_iommu_handle_req(map) virtio_iommu_handle_req(unmap) +static int virtio_iommu_handle_probe(VirtIOIOMMU *s, + struct iovec *iov, + unsigned int iov_cnt, + uint8_t *buf) +{ + struct virtio_iommu_req_probe req; + int ret = virtio_iommu_iov_to_req(iov, iov_cnt, &req, sizeof(req)); + + return ret ? ret : virtio_iommu_probe(s, &req, buf); +} + static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) { VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); struct virtio_iommu_req_head head; struct virtio_iommu_req_tail tail = {}; + size_t output_size = sizeof(tail), sz; VirtQueueElement *elem; unsigned int iov_cnt; struct iovec *iov; - size_t sz; + void *buf = NULL; for (;;) { elem = virtqueue_pop(vq, sizeof(VirtQueueElement)); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) case VIRTIO_IOMMU_T_UNMAP: tail.status = virtio_iommu_handle_unmap(s, iov, iov_cnt); break; + case VIRTIO_IOMMU_T_PROBE: + { + struct virtio_iommu_req_tail *ptail; + + output_size = s->config.probe_size + sizeof(tail); + buf = g_malloc0(output_size); + + ptail = (struct virtio_iommu_req_tail *) + (buf + s->config.probe_size); + ptail->status = virtio_iommu_handle_probe(s, iov, iov_cnt, buf); + } default: tail.status = VIRTIO_IOMMU_S_UNSUPP; } @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_handle_command(VirtIODevice *vdev, VirtQueue *vq) out: sz = iov_from_buf(elem->in_sg, elem->in_num, 0, - &tail, sizeof(tail)); - assert(sz == sizeof(tail)); + buf ? buf : &tail, output_size); + assert(sz == output_size); - virtqueue_push(vq, elem, sizeof(tail)); + virtqueue_push(vq, elem, sz); virtio_notify(vdev, vq); g_free(elem); + g_free(buf); } } @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_device_realize(DeviceState *dev, Error **errp) s->config.page_size_mask = TARGET_PAGE_MASK; s->config.input_range.end = -1UL; s->config.domain_range.end = 32; + s->config.probe_size = VIOMMU_PROBE_SIZE; virtio_add_feature(&s->features, VIRTIO_RING_F_EVENT_IDX); virtio_add_feature(&s->features, VIRTIO_RING_F_INDIRECT_DESC); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_device_realize(DeviceState *dev, Error **errp) virtio_add_feature(&s->features, VIRTIO_IOMMU_F_MAP_UNMAP); virtio_add_feature(&s->features, VIRTIO_IOMMU_F_BYPASS); virtio_add_feature(&s->features, VIRTIO_IOMMU_F_MMIO); + virtio_add_feature(&s->features, VIRTIO_IOMMU_F_PROBE); qemu_mutex_init(&s->mutex); diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/trace-events +++ b/hw/virtio/trace-events @@ -XXX,XX +XXX,XX @@ virtio_iommu_get_domain(uint32_t domain_id) "Alloc domain=%d" virtio_iommu_put_domain(uint32_t domain_id) "Free domain=%d" virtio_iommu_translate_out(uint64_t virt_addr, uint64_t phys_addr, uint32_t sid) "0x%"PRIx64" -> 0x%"PRIx64 " for sid=%d" virtio_iommu_report_fault(uint8_t reason, uint32_t flags, uint32_t endpoint, uint64_t addr) "FAULT reason=%d flags=%d endpoint=%d address =0x%"PRIx64 +virtio_iommu_fill_resv_property(uint32_t devid, uint8_t subtype, uint64_t start, uint64_t end) "dev= %d, type=%d start=0x%"PRIx64" end=0x%"PRIx64 -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> When translating an address we need to check if it belongs to a reserved virtual address range. If it does, there are 2 cases: - it belongs to a RESERVED region: the guest should neither use this address in a MAP not instruct the end-point to DMA on them. We report an error - It belongs to an MSI region: we bypass the translation. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20200629070404.10969-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/virtio/virtio-iommu.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/hw/virtio/virtio-iommu.c b/hw/virtio/virtio-iommu.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu.c +++ b/hw/virtio/virtio-iommu.c @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry virtio_iommu_translate(IOMMUMemoryRegion *mr, hwaddr addr, uint32_t sid, flags; bool bypass_allowed; bool found; + int i; interval.low = addr; interval.high = addr + 1; @@ -XXX,XX +XXX,XX @@ static IOMMUTLBEntry virtio_iommu_translate(IOMMUMemoryRegion *mr, hwaddr addr, goto unlock; } + for (i = 0; i < s->nb_reserved_regions; i++) { + ReservedRegion *reg = &s->reserved_regions[i]; + + if (addr >= reg->low && addr <= reg->high) { + switch (reg->type) { + case VIRTIO_IOMMU_RESV_MEM_T_MSI: + entry.perm = flag; + break; + case VIRTIO_IOMMU_RESV_MEM_T_RESERVED: + default: + virtio_iommu_report_fault(s, VIRTIO_IOMMU_FAULT_R_MAPPING, + VIRTIO_IOMMU_FAULT_F_ADDRESS, + sid, addr); + break; + } + goto unlock; + } + } + if (!ep->domain) { if (!bypass_allowed) { error_report_once("%s %02x:%02x.%01x not attached to any domain", -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> The machine may need to pass reserved regions to the virtio-iommu-pci device (such as the MSI window on x86 or the MSI doorbells on ARM). So let's add an array of Interval properties. Note: if some reserved regions are already set by the machine code - which should be the case in general -, the length of the property array is already set and prevents the end-user from modifying them. For example, attempting to use: -device virtio-iommu-pci,\ len-reserved-regions=1,reserved-regions[0]=0xfee00000:0xfeefffff:1 would result in the following error message: qemu-system-aarch64: -device virtio-iommu-pci,addr=0xa, len-reserved-regions=1,reserved-regions[0]=0xfee00000:0xfeefffff:1: array size property len-reserved-regions may not be set more than once Otherwise, for example, adding two reserved regions is achieved using the following options: -device virtio-iommu-pci,addr=0xa,len-reserved-regions=2,\ reserved-regions[0]=0xfee00000:0xfeefffff:1,\ reserved-regions[1]=0x1000000:100ffff:1 Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20200629070404.10969-5-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/virtio/virtio-iommu-pci.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/virtio/virtio-iommu-pci.c +++ b/hw/virtio/virtio-iommu-pci.c @@ -XXX,XX +XXX,XX @@ struct VirtIOIOMMUPCI { static Property virtio_iommu_pci_properties[] = { DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0), + DEFINE_PROP_ARRAY("reserved-regions", VirtIOIOMMUPCI, + vdev.nb_reserved_regions, vdev.reserved_regions, + qdev_prop_reserved_region, ReservedRegion), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) { VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(vpci_dev); DeviceState *vdev = DEVICE(&dev->vdev); + VirtIOIOMMU *s = VIRTIO_IOMMU(vdev); if (!qdev_get_machine_hotplug_handler(DEVICE(vpci_dev))) { MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); @@ -XXX,XX +XXX,XX @@ static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp) "-no-acpi\n"); return; } + for (int i = 0; i < s->nb_reserved_regions; i++) { + if (s->reserved_regions[i].type != VIRTIO_IOMMU_RESV_MEM_T_RESERVED && + s->reserved_regions[i].type != VIRTIO_IOMMU_RESV_MEM_T_MSI) { + error_setg(errp, "reserved region %d has an invalid type", i); + error_append_hint(errp, "Valid values are 0 and 1\n"); + } + } object_property_set_link(OBJECT(dev), OBJECT(pci_get_bus(&vpci_dev->pci_dev)), "primary-bus", &error_abort); -- 2.20.1 From: Eric Auger <eric.auger@redhat.com> At the moment the virtio-iommu translates MSI transactions. This behavior is inherited from ARM SMMU. The virt machine code knows where the guest MSI doorbells are so we can easily declare those regions as VIRTIO_IOMMU_RESV_MEM_T_MSI. With that setting the guest will not map MSIs through the IOMMU and those transactions will be simply bypassed. Depending on which MSI controller is in use (ITS or GICV2M), we declare either: - the ITS interrupt translation space (ITS_base + 0x10000), containing the GITS_TRANSLATOR or - The GICV2M single frame, containing the MSI_SETSP_NS register. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629070404.10969-6-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 7 +++++++ hw/arm/virt.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef enum VirtIOMMUType { VIRT_IOMMU_VIRTIO, } VirtIOMMUType; +typedef enum VirtMSIControllerType { + VIRT_MSI_CTRL_NONE, + VIRT_MSI_CTRL_GICV2M, + VIRT_MSI_CTRL_ITS, +} VirtMSIControllerType; + typedef enum VirtGICType { VIRT_GIC_VERSION_MAX, VIRT_GIC_VERSION_HOST, @@ -XXX,XX +XXX,XX @@ typedef struct { OnOffAuto acpi; VirtGICType gic_version; VirtIOMMUType iommu; + VirtMSIControllerType msi_controller; uint16_t virtio_iommu_bdf; struct arm_boot_info bootinfo; MemMapEntry *memmap; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_its(VirtMachineState *vms) sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, vms->memmap[VIRT_GIC_ITS].base); fdt_add_its_gic_node(vms); + vms->msi_controller = VIRT_MSI_CTRL_ITS; } static void create_v2m(VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void create_v2m(VirtMachineState *vms) } fdt_add_v2m_gic_node(vms); + vms->msi_controller = VIRT_MSI_CTRL_GICV2M; } static void create_gic(VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ out: static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) { + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev); + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { virt_memory_pre_plug(hotplug_dev, dev, errp); + } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { + hwaddr db_start = 0, db_end = 0; + char *resv_prop_str; + + switch (vms->msi_controller) { + case VIRT_MSI_CTRL_NONE: + return; + case VIRT_MSI_CTRL_ITS: + /* GITS_TRANSLATER page */ + db_start = base_memmap[VIRT_GIC_ITS].base + 0x10000; + db_end = base_memmap[VIRT_GIC_ITS].base + + base_memmap[VIRT_GIC_ITS].size - 1; + break; + case VIRT_MSI_CTRL_GICV2M: + /* MSI_SETSPI_NS page */ + db_start = base_memmap[VIRT_GIC_V2M].base; + db_end = db_start + base_memmap[VIRT_GIC_V2M].size - 1; + break; + } + resv_prop_str = g_strdup_printf("0x%"PRIx64":0x%"PRIx64":%u", + db_start, db_end, + VIRTIO_IOMMU_RESV_MEM_T_MSI); + + qdev_prop_set_uint32(dev, "len-reserved-regions", 1); + qdev_prop_set_string(dev, "reserved-regions[0]", resv_prop_str); + g_free(resv_prop_str); } } -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> On ARMv7 & ARMv8 some load/store instructions might trigger a data abort exception with no valid ISS info to be decoded. The lack of decode info makes it at least tricky to emulate those instruction which is one of the (many) reasons why KVM will not even try to do so. Add support for handling those by requesting KVM to inject external dabt into the quest. Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20200629114110.30723-2-beata.michalska@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ const KVMCapabilityInfo kvm_arch_required_capabilities[] = { static bool cap_has_mp_state; static bool cap_has_inject_serror_esr; +static bool cap_has_inject_ext_dabt; static ARMHostCPUFeatures arm_host_cpu_features; @@ -XXX,XX +XXX,XX @@ int kvm_arch_init(MachineState *ms, KVMState *s) ret = -EINVAL; } + if (kvm_check_extension(s, KVM_CAP_ARM_NISV_TO_USER)) { + if (kvm_vm_enable_cap(s, KVM_CAP_ARM_NISV_TO_USER, 0)) { + error_report("Failed to enable KVM_CAP_ARM_NISV_TO_USER cap"); + } else { + /* Set status for supporting the external dabt injection */ + cap_has_inject_ext_dabt = kvm_check_extension(s, + KVM_CAP_ARM_INJECT_EXT_DABT); + } + } + return ret; } @@ -XXX,XX +XXX,XX @@ void kvm_arm_vm_state_change(void *opaque, int running, RunState state) } } +/** + * kvm_arm_handle_dabt_nisv: + * @cs: CPUState + * @esr_iss: ISS encoding (limited) for the exception from Data Abort + * ISV bit set to '0b0' -> no valid instruction syndrome + * @fault_ipa: faulting address for the synchronous data abort + * + * Returns: 0 if the exception has been handled, < 0 otherwise + */ +static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, + uint64_t fault_ipa) +{ + /* + * Request KVM to inject the external data abort into the guest + */ + if (cap_has_inject_ext_dabt) { + struct kvm_vcpu_events events = { }; + /* + * The external data abort event will be handled immediately by KVM + * using the address fault that triggered the exit on given VCPU. + * Requesting injection of the external data abort does not rely + * on any other VCPU state. Therefore, in this particular case, the VCPU + * synchronization can be exceptionally skipped. + */ + events.exception.ext_dabt_pending = 1; + /* KVM_CAP_ARM_INJECT_EXT_DABT implies KVM_CAP_VCPU_EVENTS */ + return kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events); + } else { + error_report("Data abort exception triggered by guest memory access " + "at physical address: 0x" TARGET_FMT_lx, + (target_ulong)fault_ipa); + error_printf("KVM unable to emulate faulting instruction.\n"); + } + return -1; +} + int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) { int ret = 0; @@ -XXX,XX +XXX,XX @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) ret = EXCP_DEBUG; } /* otherwise return to guest */ break; + case KVM_EXIT_ARM_NISV: + /* External DABT with no valid iss to decode */ + ret = kvm_arm_handle_dabt_nisv(cs, run->arm_nisv.esr_iss, + run->arm_nisv.fault_ipa); + break; default: qemu_log_mask(LOG_UNIMP, "%s: un-handled exit reason %d\n", __func__, run->exit_reason); -- 2.20.1 From: Beata Michalska <beata.michalska@linaro.org> Injecting external data abort through KVM might trigger an issue on kernels that do not get updated to include the KVM fix. For those and aarch32 guests, the injected abort gets misconfigured to be an implementation defined exception. This leads to the guest repeatedly re-running the faulting instruction. Add support for handling that case. [ Fixed-by: 018f22f95e8a ('KVM: arm: Fix DFSR setting for non-LPAE aarch32 guests') Fixed-by: 21aecdbd7f3a ('KVM: arm: Make inject_abt32() inject an external abort instead') ] Signed-off-by: Beata Michalska <beata.michalska@linaro.org> Acked-by: Andrew Jones <drjones@redhat.com> Message-id: 20200629114110.30723-3-beata.michalska@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/kvm_arm.h | 10 +++++++++ target/arm/kvm.c | 30 ++++++++++++++++++++++++++- target/arm/kvm32.c | 34 ++++++++++++++++++++++++++++++ target/arm/kvm64.c | 49 ++++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 124 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint64_t esr; } serror; + uint8_t ext_dabt_raised; /* Tracking/verifying injection of ext DABT */ + /* State of our input IRQ/FIQ/VIRQ/VFIQ lines */ uint32_t irq_line_state; diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ bool kvm_arm_hw_debug_active(CPUState *cs); struct kvm_guest_debug_arch; void kvm_arm_copy_hw_debug_data(struct kvm_guest_debug_arch *ptr); +/** + * kvm_arm_verify_ext_dabt_pending: + * @cs: CPUState + * + * Verify the fault status code wrt the Ext DABT injection + * + * Returns: true if the fault status code is as expected, false otherwise + */ +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs); + /** * its_class_name: * diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ int kvm_get_vcpu_events(ARMCPU *cpu) void kvm_arch_pre_run(CPUState *cs, struct kvm_run *run) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + + if (unlikely(env->ext_dabt_raised)) { + /* + * Verifying that the ext DABT has been properly injected, + * otherwise risking indefinitely re-running the faulting instruction + * Covering a very narrow case for kernels 5.5..5.5.4 + * when injected abort was misconfigured to be + * an IMPLEMENTATION DEFINED exception (for 32-bit EL1) + */ + if (!arm_feature(env, ARM_FEATURE_AARCH64) && + unlikely(!kvm_arm_verify_ext_dabt_pending(cs))) { + + error_report("Data abort exception with no valid ISS generated by " + "guest memory access. KVM unable to emulate faulting " + "instruction. Failed to inject an external data abort " + "into the guest."); + abort(); + } + /* Clear the status */ + env->ext_dabt_raised = 0; + } } MemTxAttrs kvm_arch_post_run(CPUState *cs, struct kvm_run *run) @@ -XXX,XX +XXX,XX @@ void kvm_arm_vm_state_change(void *opaque, int running, RunState state) static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, uint64_t fault_ipa) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; /* * Request KVM to inject the external data abort into the guest */ @@ -XXX,XX +XXX,XX @@ static int kvm_arm_handle_dabt_nisv(CPUState *cs, uint64_t esr_iss, */ events.exception.ext_dabt_pending = 1; /* KVM_CAP_ARM_INJECT_EXT_DABT implies KVM_CAP_VCPU_EVENTS */ - return kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events); + if (!kvm_vcpu_ioctl(cs, KVM_SET_VCPU_EVENTS, &events)) { + env->ext_dabt_raised = 1; + return 0; + } } else { error_report("Data abort exception triggered by guest memory access " "at physical address: 0x" TARGET_FMT_lx, diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ void kvm_arm_pmu_init(CPUState *cs) { qemu_log_mask(LOG_UNIMP, "%s: not implemented\n", __func__); } + +#define ARM_REG_DFSR ARM_CP15_REG32(0, 5, 0, 0) +#define ARM_REG_TTBCR ARM_CP15_REG32(0, 2, 0, 2) +/* + *DFSR: + * TTBCR.EAE == 0 + * FS[4] - DFSR[10] + * FS[3:0] - DFSR[3:0] + * TTBCR.EAE == 1 + * FS, bits [5:0] + */ +#define DFSR_FSC(lpae, v) \ + ((lpae) ? ((v) & 0x3F) : (((v) >> 6) | ((v) & 0x1F))) + +#define DFSC_EXTABT(lpae) ((lpae) ? 0x10 : 0x08) + +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs) +{ + uint32_t dfsr_val; + + if (!kvm_get_one_reg(cs, ARM_REG_DFSR, &dfsr_val)) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + uint32_t ttbcr; + int lpae = 0; + + if (!kvm_get_one_reg(cs, ARM_REG_TTBCR, &ttbcr)) { + lpae = arm_feature(env, ARM_FEATURE_LPAE) && (ttbcr & TTBCR_EAE); + } + /* The verification is based on FS filed of the DFSR reg only*/ + return (DFSR_FSC(lpae, dfsr_val) == DFSC_EXTABT(lpae)); + } + return false; +} diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit) return false; } + +#define ARM64_REG_ESR_EL1 ARM64_SYS_REG(3, 0, 5, 2, 0) +#define ARM64_REG_TCR_EL1 ARM64_SYS_REG(3, 0, 2, 0, 2) + +/* + * ESR_EL1 + * ISS encoding + * AARCH64: DFSC, bits [5:0] + * AARCH32: + * TTBCR.EAE == 0 + * FS[4] - DFSR[10] + * FS[3:0] - DFSR[3:0] + * TTBCR.EAE == 1 + * FS, bits [5:0] + */ +#define ESR_DFSC(aarch64, lpae, v) \ + ((aarch64 || (lpae)) ? ((v) & 0x3F) \ + : (((v) >> 6) | ((v) & 0x1F))) + +#define ESR_DFSC_EXTABT(aarch64, lpae) \ + ((aarch64) ? 0x10 : (lpae) ? 0x10 : 0x8) + +bool kvm_arm_verify_ext_dabt_pending(CPUState *cs) +{ + uint64_t dfsr_val; + + if (!kvm_get_one_reg(cs, ARM64_REG_ESR_EL1, &dfsr_val)) { + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + int aarch64_mode = arm_feature(env, ARM_FEATURE_AARCH64); + int lpae = 0; + + if (!aarch64_mode) { + uint64_t ttbcr; + + if (!kvm_get_one_reg(cs, ARM64_REG_TCR_EL1, &ttbcr)) { + lpae = arm_feature(env, ARM_FEATURE_LPAE) + && (ttbcr & TTBCR_EAE); + } + } + /* + * The verification here is based on the DFSC bits + * of the ESR_EL1 reg only + */ + return (ESR_DFSC(aarch64_mode, lpae, dfsr_val) == + ESR_DFSC_EXTABT(aarch64_mode, lpae)); + } + return false; +} -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Fixes: 93dd625f8bf7 ("tests/acpi: update expected data files") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629140938.17566-2-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,19 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/pc/DSDT", -"tests/data/acpi/pc/DSDT.acpihmat", -"tests/data/acpi/pc/DSDT.bridge", -"tests/data/acpi/pc/DSDT.cphp", -"tests/data/acpi/pc/DSDT.dimmpxm", -"tests/data/acpi/pc/DSDT.ipmikcs", -"tests/data/acpi/pc/DSDT.memhp", -"tests/data/acpi/pc/DSDT.numamem", -"tests/data/acpi/q35/DSDT", -"tests/data/acpi/q35/DSDT.acpihmat", -"tests/data/acpi/q35/DSDT.bridge", -"tests/data/acpi/q35/DSDT.cphp", -"tests/data/acpi/q35/DSDT.dimmpxm", -"tests/data/acpi/q35/DSDT.ipmibt", -"tests/data/acpi/q35/DSDT.memhp", -"tests/data/acpi/q35/DSDT.mmio64", -"tests/data/acpi/q35/DSDT.numamem", -"tests/data/acpi/q35/DSDT.tis", -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20200629140938.17566-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,4 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/DSDT", +"tests/data/acpi/virt/DSDT.memhp", +"tests/data/acpi/virt/DSDT.numamem", -- 2.20.1 From: Andrew Jones <drjones@redhat.com> The flash device is exclusively for the host-controlled firmware, so we should not expose it to the OS. Exposing it risks the OS messing with it, which could break firmware runtime services and surprise the OS when all its changes disappear after reboot. As firmware needs the device and uses DT, we leave the device exposed there. It's up to firmware to remove the nodes from DT before sending it on to the OS. However, there's no need to force firmware to remove tables from ACPI (which it doesn't know how to do anyway), so we simply don't add the tables in the first place. But, as we've been adding the tables for quite some time and don't want to change the default hardware exposed to versioned machines, then we only stop exposing the flash device tables for 5.1 and later machine types. Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com> Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20200629140938.17566-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + hw/arm/virt-acpi-build.c | 5 ++++- hw/arm/virt.c | 3 +++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef struct { bool no_highmem_ecam; bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */ bool kvm_no_adjvtime; + bool acpi_expose_flash; } VirtMachineClass; typedef struct { diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -XXX,XX +XXX,XX @@ static void build_fadt_rev5(GArray *table_data, BIOSLinker *linker, static void build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) { + VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms); Aml *scope, *dsdt; MachineState *ms = MACHINE(vms); const MemMapEntry *memmap = vms->memmap; @@ -XXX,XX +XXX,XX @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) acpi_dsdt_add_cpus(scope, vms->smp_cpus); acpi_dsdt_add_uart(scope, &memmap[VIRT_UART], (irqmap[VIRT_UART] + ARM_SPI_BASE)); - acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]); + if (vmc->acpi_expose_flash) { + acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]); + } acpi_dsdt_add_fw_cfg(scope, &memmap[VIRT_FW_CFG]); acpi_dsdt_add_virtio(scope, &memmap[VIRT_MMIO], (irqmap[VIRT_MMIO] + ARM_SPI_BASE), NUM_VIRTIO_TRANSPORTS); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 1) static void virt_machine_5_0_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_5_1_options(mc); compat_props_add(mc->compat_props, hw_compat_5_0, hw_compat_5_0_len); mc->numa_mem_supported = true; + vmc->acpi_expose_flash = true; } DEFINE_VIRT_MACHINE(5, 0) -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Differences between disassembled ASL files for DSDT: @@ -XXX,XX +XXX,XX @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of a, Mon Jun 29 09:50:01 2020 + * Disassembly of b, Mon Jun 29 09:50:03 2020 * * Original Table Header: * Signature "DSDT" - * Length 0x000014BB (5307) + * Length 0x00001455 (5205) * Revision 0x02 - * Checksum 0xD1 + * Checksum 0xE1 * OEM ID "BOCHS " * OEM Table ID "BXPCDSDT" * OEM Revision 0x00000001 (1) @@ -XXX,XX +XXX,XX @@ }) } - Device (FLS0) - { - Name (_HID, "LNRO0015") // _HID: Hardware ID - Name (_UID, Zero) // _UID: Unique ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - Memory32Fixed (ReadWrite, - 0x00000000, // Address Base - 0x04000000, // Address Length - ) - }) - } - - Device (FLS1) - { - Name (_HID, "LNRO0015") // _HID: Hardware ID - Name (_UID, One) // _UID: Unique ID - Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings - { - Memory32Fixed (ReadWrite, - 0x04000000, // Address Base - 0x04000000, // Address Length - ) - }) - } - Device (FWCF) { Name (_HID, "QEMU0002") // _HID: Hardware ID The other two binaries have the same changes (the removal of the flash devices). Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 20200629140938.17566-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 3 --- tests/data/acpi/virt/DSDT | Bin 5307 -> 5205 bytes tests/data/acpi/virt/DSDT.memhp | Bin 6668 -> 6566 bytes tests/data/acpi/virt/DSDT.numamem | Bin 5307 -> 5205 bytes 4 files changed, 3 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,4 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/DSDT", -"tests/data/acpi/virt/DSDT.memhp", -"tests/data/acpi/virt/DSDT.numamem", diff --git a/tests/data/acpi/virt/DSDT b/tests/data/acpi/virt/DSDT index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmdn3c~yhUCD<h-RD^+n>ET2!X{H9}iRuX(-<}f&0DgxFc>n+a delta 156 zcmcbrv0IbNCD<iow+I6R)5VEg(oAih6V(&y4c&Z#4LIUGJY9Hw{DS-q3=B;fIO0P+ zU4W!>P_UpN7hfAE10w?juv9WcH-WSmV$;Hiu7w4t3#`S$E!^1+q9xGPH`KtuzzAr5 LaERl^1zUvy_;n(J diff --git a/tests/data/acpi/virt/DSDT.memhp b/tests/data/acpi/virt/DSDT.memhp index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmeA%S!T@T66_MPOp<|tiD@F2G*jb@iRuX(-^xn@0CHUjRR910 delta 156 zcmZ2x++)J!66_MfBgMeL^l>7WG*kP$iRuaUhHgH=1|0Doo-VvTenI{Q28N~#9Py!^ zE<n;bC|FRCi?5B7fsp|MSSlH!n?PC&v1wsM*TMqS1=eEW7Vhi@(GuwD8){%+U<5Qj LIK*+|0yaqism~!^ diff --git a/tests/data/acpi/virt/DSDT.numamem b/tests/data/acpi/virt/DSDT.numamem index XXXXXXX..XXXXXXX 100644 GIT binary patch delta 28 kcmdn3c~yhUCD<h-RD^+n>ET2!X{H9}iRuX(-<}f&0DgxFc>n+a delta 156 zcmcbrv0IbNCD<iow+I6R)5VEg(oAih6V(&y4c&Z#4LIUGJY9Hw{DS-q3=B;fIO0P+ zU4W!>P_UpN7hfAE10w?juv9WcH-WSmV$;Hiu7w4t3#`S$E!^1+q9xGPH`KtuzzAr5 LaERl^1zUvy_;n(J -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> The temp that gets assigned to clean_addr has been allocated with new_tmp_a64, which means that it will be freed at the end of the instruction. Freeing it earlier leads to assertion failure. The loop creates a complication, in which we allocate a new local temp, which does need freeing, and the final code path is shared between the loop and non-loop. Fix this complication by adding new_tmp_a64_local so that the new local temp is freed at the end, and can be treated exactly like the non-loop path. Fixes: bba87d0a0f4 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200702175605.1987125-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.h | 1 + target/arm/translate-a64.c | 6 ++++++ target/arm/translate-sve.c | 8 ++------ 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/target/arm/translate-a64.h b/target/arm/translate-a64.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.h +++ b/target/arm/translate-a64.h @@ -XXX,XX +XXX,XX @@ void unallocated_encoding(DisasContext *s); } while (0) TCGv_i64 new_tmp_a64(DisasContext *s); +TCGv_i64 new_tmp_a64_local(DisasContext *s); TCGv_i64 new_tmp_a64_zero(DisasContext *s); TCGv_i64 cpu_reg(DisasContext *s, int reg); TCGv_i64 cpu_reg_sp(DisasContext *s, int reg); diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ TCGv_i64 new_tmp_a64(DisasContext *s) return s->tmp_a64[s->tmp_a64_count++] = tcg_temp_new_i64(); } +TCGv_i64 new_tmp_a64_local(DisasContext *s) +{ + assert(s->tmp_a64_count < TMP_A64_MAX); + return s->tmp_a64[s->tmp_a64_count++] = tcg_temp_local_new_i64(); +} + TCGv_i64 new_tmp_a64_zero(DisasContext *s) { TCGv_i64 t = new_tmp_a64(s); diff --git a/target/arm/translate-sve.c b/target/arm/translate-sve.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-sve.c +++ b/target/arm/translate-sve.c @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) /* Copy the clean address into a local temp, live across the loop. */ t0 = clean_addr; - clean_addr = tcg_temp_local_new_i64(); + clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); - tcg_temp_free_i64(t0); gen_set_label(loop); @@ -XXX,XX +XXX,XX @@ static void do_ldr(DisasContext *s, uint32_t vofs, int len, int rn, int imm) tcg_gen_st_i64(t0, cpu_env, vofs + len_align); tcg_temp_free_i64(t0); } - tcg_temp_free_i64(clean_addr); } /* Similarly for stores. */ @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) /* Copy the clean address into a local temp, live across the loop. */ t0 = clean_addr; - clean_addr = tcg_temp_local_new_i64(); + clean_addr = new_tmp_a64_local(s); tcg_gen_mov_i64(clean_addr, t0); - tcg_temp_free_i64(t0); gen_set_label(loop); @@ -XXX,XX +XXX,XX @@ static void do_str(DisasContext *s, uint32_t vofs, int len, int rn, int imm) } tcg_temp_free_i64(t0); } - tcg_temp_free_i64(clean_addr); } static bool trans_LDR_zri(DisasContext *s, arg_rri *a) -- 2.20.1 In bcm2835_fb_mbox_push(), Coverity complains (CID 1429989) that we pass a pointer to a local struct to another function without initializing all its fields. This is a real bug: bcm2835_fb_reconfigure() copies the whole of our new BCM2385FBConfig struct into s->config, so any fields we don't initialize will corrupt the state of the device. Copy the two fields which we don't want to update (pixo and alpha) from the existing config so we don't accidentally change them. Fixes: cfb7ba983857e40e88 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628195436.27582-1-peter.maydell@linaro.org --- hw/display/bcm2835_fb.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/hw/display/bcm2835_fb.c b/hw/display/bcm2835_fb.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/bcm2835_fb.c +++ b/hw/display/bcm2835_fb.c @@ -XXX,XX +XXX,XX @@ static void bcm2835_fb_mbox_push(BCM2835FBState *s, uint32_t value) newconf.base = s->vcram_base | (value & 0xc0000000); newconf.base += BCM2835_FB_OFFSET; + /* Copy fields which we don't want to change from the existing config */ + newconf.pixo = s->config.pixo; + newconf.alpha = s->config.alpha; + bcm2835_fb_validate_config(&newconf); pitch = bcm2835_fb_get_pitch(&newconf); -- 2.20.1 The spitz board has been around a long time, and still has a fair number of hard-coded tab characters in it. We're about to do some work on this source file, so start out by expanding out the tabs. This commit is a pure whitespace only change. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-2-peter.maydell@linaro.org --- hw/arm/spitz.c | 156 ++++++++++++++++++++++++------------------------- 1 file changed, 78 insertions(+), 78 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "cpu.h" #undef REG_FMT -#define REG_FMT "0x%02lx" +#define REG_FMT "0x%02lx" /* Spitz Flash */ -#define FLASH_BASE 0x0c000000 -#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ -#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ -#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ -#define FLASH_ECCCNTR 0x0c /* ECC byte counter */ -#define FLASH_ECCCLRR 0x10 /* Clear ECC */ -#define FLASH_FLASHIO 0x14 /* Flash I/O */ -#define FLASH_FLASHCTL 0x18 /* Flash Control */ +#define FLASH_BASE 0x0c000000 +#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ +#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ +#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ +#define FLASH_ECCCNTR 0x0c /* ECC byte counter */ +#define FLASH_ECCCLRR 0x10 /* Clear ECC */ +#define FLASH_FLASHIO 0x14 /* Flash I/O */ +#define FLASH_FLASHCTL 0x18 /* Flash Control */ -#define FLASHCTL_CE0 (1 << 0) -#define FLASHCTL_CLE (1 << 1) -#define FLASHCTL_ALE (1 << 2) -#define FLASHCTL_WP (1 << 3) -#define FLASHCTL_CE1 (1 << 4) -#define FLASHCTL_RYBY (1 << 5) -#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) +#define FLASHCTL_CE0 (1 << 0) +#define FLASHCTL_CLE (1 << 1) +#define FLASHCTL_ALE (1 << 2) +#define FLASHCTL_WP (1 << 3) +#define FLASHCTL_CE1 (1 << 4) +#define FLASHCTL_RYBY (1 << 5) +#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) #define TYPE_SL_NAND "sl-nand" #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND) @@ -XXX,XX +XXX,XX @@ static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) int ryby; switch (addr) { -#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) +#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) case FLASH_ECCLPLB: return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) | BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7); -#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) +#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) case FLASH_ECCLPUB: return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) | BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7); @@ -XXX,XX +XXX,XX @@ static void sl_nand_realize(DeviceState *dev, Error **errp) /* Spitz Keyboard */ -#define SPITZ_KEY_STROBE_NUM 11 -#define SPITZ_KEY_SENSE_NUM 7 +#define SPITZ_KEY_STROBE_NUM 11 +#define SPITZ_KEY_SENSE_NUM 7 static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = { 12, 17, 91, 34, 36, 38, 39 @@ -XXX,XX +XXX,XX @@ static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = { { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 }, }; -#define SPITZ_GPIO_AK_INT 13 /* Remote control */ -#define SPITZ_GPIO_SYNC 16 /* Sync button */ -#define SPITZ_GPIO_ON_KEY 95 /* Power button */ -#define SPITZ_GPIO_SWA 97 /* Lid */ -#define SPITZ_GPIO_SWB 96 /* Tablet mode */ +#define SPITZ_GPIO_AK_INT 13 /* Remote control */ +#define SPITZ_GPIO_SYNC 16 /* Sync button */ +#define SPITZ_GPIO_ON_KEY 95 /* Power button */ +#define SPITZ_GPIO_SWA 97 /* Lid */ +#define SPITZ_GPIO_SWB 96 /* Tablet mode */ /* The special buttons are mapped to unused keys */ static const int spitz_gpiomap[5] = { @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode) #define SPITZ_MOD_CTRL (1 << 8) #define SPITZ_MOD_FN (1 << 9) -#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c +#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c static void spitz_keyboard_handler(void *opaque, int keycode) { @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_handler(void *opaque, int keycode) uint16_t code; int mapcode; switch (keycode) { - case 0x2a: /* Left Shift */ + case 0x2a: /* Left Shift */ s->modifiers |= 1; break; case 0xaa: s->modifiers &= ~1; break; - case 0x36: /* Right Shift */ + case 0x36: /* Right Shift */ s->modifiers |= 2; break; case 0xb6: s->modifiers &= ~2; break; - case 0x1d: /* Control */ + case 0x1d: /* Control */ s->modifiers |= 4; break; case 0x9d: s->modifiers &= ~4; break; - case 0x38: /* Alt */ + case 0x38: /* Alt */ s->modifiers |= 8; break; case 0xb8: @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_realize(DeviceState *dev, Error **errp) /* LCD backlight controller */ -#define LCDTG_RESCTL 0x00 -#define LCDTG_PHACTRL 0x01 -#define LCDTG_DUTYCTRL 0x02 -#define LCDTG_POWERREG0 0x03 -#define LCDTG_POWERREG1 0x04 -#define LCDTG_GPOR3 0x05 -#define LCDTG_PICTRL 0x06 -#define LCDTG_POLCTRL 0x07 +#define LCDTG_RESCTL 0x00 +#define LCDTG_PHACTRL 0x01 +#define LCDTG_DUTYCTRL 0x02 +#define LCDTG_POWERREG0 0x03 +#define LCDTG_POWERREG1 0x04 +#define LCDTG_GPOR3 0x05 +#define LCDTG_PICTRL 0x06 +#define LCDTG_POLCTRL 0x07 typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *dev, Error **errp) /* SSP devices */ -#define CORGI_SSP_PORT 2 +#define CORGI_SSP_PORT 2 -#define SPITZ_GPIO_LCDCON_CS 53 -#define SPITZ_GPIO_ADS7846_CS 14 -#define SPITZ_GPIO_MAX1111_CS 20 -#define SPITZ_GPIO_TP_INT 11 +#define SPITZ_GPIO_LCDCON_CS 53 +#define SPITZ_GPIO_ADS7846_CS 14 +#define SPITZ_GPIO_MAX1111_CS 20 +#define SPITZ_GPIO_TP_INT 11 static DeviceState *max1111; @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) s->enable[line] = !level; } -#define MAX1111_BATT_VOLT 1 -#define MAX1111_BATT_TEMP 2 -#define MAX1111_ACIN_VOLT 3 +#define MAX1111_BATT_VOLT 1 +#define MAX1111_BATT_TEMP 2 +#define MAX1111_ACIN_VOLT 3 -#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ -#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ -#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ +#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ +#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ +#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ static void spitz_adc_temp_on(void *opaque, int line, int level) { @@ -XXX,XX +XXX,XX @@ static void spitz_microdrive_attach(PXA2xxState *cpu, int slot) /* Wm8750 and Max7310 on I2C */ -#define AKITA_MAX_ADDR 0x18 -#define SPITZ_WM_ADDRL 0x1b -#define SPITZ_WM_ADDRH 0x1a +#define AKITA_MAX_ADDR 0x18 +#define SPITZ_WM_ADDRL 0x1b +#define SPITZ_WM_ADDRH 0x1a -#define SPITZ_GPIO_WM 5 +#define SPITZ_GPIO_WM 5 static void spitz_wm8750_addr(void *opaque, int line, int level) { @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) } } -#define SPITZ_SCP_LED_GREEN 1 -#define SPITZ_SCP_JK_B 2 -#define SPITZ_SCP_CHRG_ON 3 -#define SPITZ_SCP_MUTE_L 4 -#define SPITZ_SCP_MUTE_R 5 -#define SPITZ_SCP_CF_POWER 6 -#define SPITZ_SCP_LED_ORANGE 7 -#define SPITZ_SCP_JK_A 8 -#define SPITZ_SCP_ADC_TEMP_ON 9 -#define SPITZ_SCP2_IR_ON 1 -#define SPITZ_SCP2_AKIN_PULLUP 2 -#define SPITZ_SCP2_BACKLIGHT_CONT 7 -#define SPITZ_SCP2_BACKLIGHT_ON 8 -#define SPITZ_SCP2_MIC_BIAS 9 +#define SPITZ_SCP_LED_GREEN 1 +#define SPITZ_SCP_JK_B 2 +#define SPITZ_SCP_CHRG_ON 3 +#define SPITZ_SCP_MUTE_L 4 +#define SPITZ_SCP_MUTE_R 5 +#define SPITZ_SCP_CF_POWER 6 +#define SPITZ_SCP_LED_ORANGE 7 +#define SPITZ_SCP_JK_A 8 +#define SPITZ_SCP_ADC_TEMP_ON 9 +#define SPITZ_SCP2_IR_ON 1 +#define SPITZ_SCP2_AKIN_PULLUP 2 +#define SPITZ_SCP2_BACKLIGHT_CONT 7 +#define SPITZ_SCP2_BACKLIGHT_ON 8 +#define SPITZ_SCP2_MIC_BIAS 9 static void spitz_scoop_gpio_setup(PXA2xxState *cpu, DeviceState *scp0, DeviceState *scp1) @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(PXA2xxState *cpu, qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } -#define SPITZ_GPIO_HSYNC 22 -#define SPITZ_GPIO_SD_DETECT 9 -#define SPITZ_GPIO_SD_WP 81 -#define SPITZ_GPIO_ON_RESET 89 -#define SPITZ_GPIO_BAT_COVER 90 -#define SPITZ_GPIO_CF1_IRQ 105 -#define SPITZ_GPIO_CF1_CD 94 -#define SPITZ_GPIO_CF2_IRQ 106 -#define SPITZ_GPIO_CF2_CD 93 +#define SPITZ_GPIO_HSYNC 22 +#define SPITZ_GPIO_SD_DETECT 9 +#define SPITZ_GPIO_SD_WP 81 +#define SPITZ_GPIO_ON_RESET 89 +#define SPITZ_GPIO_BAT_COVER 90 +#define SPITZ_GPIO_CF1_IRQ 105 +#define SPITZ_GPIO_CF1_CD 94 +#define SPITZ_GPIO_CF2_IRQ 106 +#define SPITZ_GPIO_CF2_CD 93 static int spitz_hsync; @@ -XXX,XX +XXX,XX @@ static void spitz_gpio_setup(PXA2xxState *cpu, int slots) /* Board init. */ enum spitz_model_e { spitz, akita, borzoi, terrier }; -#define SPITZ_RAM 0x04000000 -#define SPITZ_ROM 0x00800000 +#define SPITZ_RAM 0x04000000 +#define SPITZ_ROM 0x00800000 static struct arm_boot_info spitz_binfo = { .loader_start = PXA2XX_SDRAM_BASE, -- 2.20.1 For the four Spitz-family machines (akita, borzoi, spitz, terrier) create a proper abstract class SpitzMachineClass which encapsulates the common behaviour, rather than having them all derive directly from TYPE_MACHINE: * instead of each machine class setting mc->init to a wrapper function which calls spitz_common_init() with parameters, put that data in the SpitzMachineClass and make spitz_common_init the SpitzMachineClass machine-init function * move the settings of mc->block_default_type and mc->ignore_memory_transaction_failures into the SpitzMachineClass class init rather than repeating them in each machine's class init (The motivation is that we're going to want to keep some state in the SpitzMachineState so we can connect GPIOs between devices created in one sub-function of the machine init to devices created in a different sub-function.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-3-peter.maydell@linaro.org --- hw/arm/spitz.c | 91 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 55 insertions(+), 36 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "cpu.h" +enum spitz_model_e { spitz, akita, borzoi, terrier }; + +typedef struct { + MachineClass parent; + enum spitz_model_e model; + int arm_id; +} SpitzMachineClass; + +typedef struct { + MachineState parent; +} SpitzMachineState; + +#define TYPE_SPITZ_MACHINE "spitz-common" +#define SPITZ_MACHINE(obj) \ + OBJECT_CHECK(SpitzMachineState, obj, TYPE_SPITZ_MACHINE) +#define SPITZ_MACHINE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(SpitzMachineClass, obj, TYPE_SPITZ_MACHINE) +#define SPITZ_MACHINE_CLASS(klass) \ + OBJECT_CLASS_CHECK(SpitzMachineClass, klass, TYPE_SPITZ_MACHINE) + #undef REG_FMT #define REG_FMT "0x%02lx" @@ -XXX,XX +XXX,XX @@ static void spitz_gpio_setup(PXA2xxState *cpu, int slots) } /* Board init. */ -enum spitz_model_e { spitz, akita, borzoi, terrier }; - #define SPITZ_RAM 0x04000000 #define SPITZ_ROM 0x00800000 @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info spitz_binfo = { .ram_size = 0x04000000, }; -static void spitz_common_init(MachineState *machine, - enum spitz_model_e model, int arm_id) +static void spitz_common_init(MachineState *machine) { + SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine); + enum spitz_model_e model = smc->model; PXA2xxState *mpu; DeviceState *scp0, *scp1 = NULL; MemoryRegion *address_space_mem = get_system_memory(); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine, /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ spitz_microdrive_attach(mpu, 0); - spitz_binfo.board_id = arm_id; + spitz_binfo.board_id = smc->arm_id; arm_load_kernel(mpu->cpu, machine, &spitz_binfo); sl_bootparam_write(SL_PXA_PARAM_BASE); } -static void spitz_init(MachineState *machine) +static void spitz_common_class_init(ObjectClass *oc, void *data) { - spitz_common_init(machine, spitz, 0x2c9); + MachineClass *mc = MACHINE_CLASS(oc); + + mc->block_default_type = IF_IDE; + mc->ignore_memory_transaction_failures = true; + mc->init = spitz_common_init; } -static void borzoi_init(MachineState *machine) -{ - spitz_common_init(machine, borzoi, 0x33f); -} - -static void akita_init(MachineState *machine) -{ - spitz_common_init(machine, akita, 0x2e8); -} - -static void terrier_init(MachineState *machine) -{ - spitz_common_init(machine, terrier, 0x33f); -} +static const TypeInfo spitz_common_info = { + .name = TYPE_SPITZ_MACHINE, + .parent = TYPE_MACHINE, + .abstract = true, + .instance_size = sizeof(SpitzMachineState), + .class_size = sizeof(SpitzMachineClass), + .class_init = spitz_common_class_init, +}; static void akitapda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C1000 (Akita) PDA (PXA270)"; - mc->init = akita_init; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = akita; + smc->arm_id = 0x2e8; } static const TypeInfo akitapda_type = { .name = MACHINE_TYPE_NAME("akita"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = akitapda_class_init, }; static void spitzpda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3000 (Spitz) PDA (PXA270)"; - mc->init = spitz_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = spitz; + smc->arm_id = 0x2c9; } static const TypeInfo spitzpda_type = { .name = MACHINE_TYPE_NAME("spitz"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = spitzpda_class_init, }; static void borzoipda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3100 (Borzoi) PDA (PXA270)"; - mc->init = borzoi_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); + smc->model = borzoi; + smc->arm_id = 0x33f; } static const TypeInfo borzoipda_type = { .name = MACHINE_TYPE_NAME("borzoi"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = borzoipda_class_init, }; static void terrierpda_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); + SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); mc->desc = "Sharp SL-C3200 (Terrier) PDA (PXA270)"; - mc->init = terrier_init; - mc->block_default_type = IF_IDE; - mc->ignore_memory_transaction_failures = true; mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5"); + smc->model = terrier; + smc->arm_id = 0x33f; } static const TypeInfo terrierpda_type = { .name = MACHINE_TYPE_NAME("terrier"), - .parent = TYPE_MACHINE, + .parent = TYPE_SPITZ_MACHINE, .class_init = terrierpda_class_init, }; static void spitz_machine_init(void) { + type_register_static(&spitz_common_info); type_register_static(&akitapda_type); type_register_static(&spitzpda_type); type_register_static(&borzoipda_type); -- 2.20.1 Keep pointers to the MPU and the SSI devices in SpitzMachineState. We're going to want to make GPIO connections between some of the SSI devices and the SCPs, so we want to keep hold of a pointer to those; putting the MPU into the struct allows us to pass just one thing to spitz_ssp_attach() rather than two. We have to retain the setting of the global "max1111" variable for the moment as it is used in spitz_adc_temp_on(); later in this series of commits we will be able to remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-4-peter.maydell@linaro.org --- hw/arm/spitz.c | 50 ++++++++++++++++++++++++++++---------------------- 1 file changed, 28 insertions(+), 22 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { typedef struct { MachineState parent; + PXA2xxState *mpu; + DeviceState *mux; + DeviceState *lcdtg; + DeviceState *ads7846; + DeviceState *max1111; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_realize(SSISlave *d, Error **errp) s->bus[2] = ssi_create_bus(dev, "ssi2"); } -static void spitz_ssp_attach(PXA2xxState *cpu) +static void spitz_ssp_attach(SpitzMachineState *sms) { - DeviceState *mux; - DeviceState *dev; void *bus; - mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); + sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); - bus = qdev_get_child_bus(mux, "ssi0"); - ssi_create_slave(bus, "spitz-lcdtg"); + bus = qdev_get_child_bus(sms->mux, "ssi0"); + sms->lcdtg = ssi_create_slave(bus, "spitz-lcdtg"); - bus = qdev_get_child_bus(mux, "ssi1"); - dev = ssi_create_slave(bus, "ads7846"); - qdev_connect_gpio_out(dev, 0, - qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT)); + bus = qdev_get_child_bus(sms->mux, "ssi1"); + sms->ads7846 = ssi_create_slave(bus, "ads7846"); + qdev_connect_gpio_out(sms->ads7846, 0, + qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); - bus = qdev_get_child_bus(mux, "ssi2"); - max1111 = ssi_create_slave(bus, "max1111"); - max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); - max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); - max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); + bus = qdev_get_child_bus(sms->mux, "ssi2"); + sms->max1111 = ssi_create_slave(bus, "max1111"); + max1111 = sms->max1111; + max111x_set_input(sms->max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); + max111x_set_input(sms->max1111, MAX1111_BATT_TEMP, 0); + max111x_set_input(sms->max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS, - qdev_get_gpio_in(mux, 0)); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS, - qdev_get_gpio_in(mux, 1)); - qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS, - qdev_get_gpio_in(mux, 2)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS, + qdev_get_gpio_in(sms->mux, 0)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_ADS7846_CS, + qdev_get_gpio_in(sms->mux, 1)); + qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_MAX1111_CS, + qdev_get_gpio_in(sms->mux, 2)); } /* CF Microdrive */ @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info spitz_binfo = { static void spitz_common_init(MachineState *machine) { SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine); + SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; DeviceState *scp0, *scp1 = NULL; @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) /* Setup CPU & memory */ mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, machine->cpu_type); + sms->mpu = mpu; sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) /* Setup peripherals */ spitz_keyboard_register(mpu); - spitz_ssp_attach(mpu); + spitz_ssp_attach(sms); scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); if (model != akita) { -- 2.20.1 Keep pointers to scp0, scp1 in SpitzMachineState, and just pass that to spitz_scoop_gpio_setup(). (We'll want to use some of the other fields in SpitzMachineState in that function in the next commit.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-5-peter.maydell@linaro.org --- hw/arm/spitz.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { DeviceState *lcdtg; DeviceState *ads7846; DeviceState *max1111; + DeviceState *scp0; + DeviceState *scp1; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) #define SPITZ_SCP2_BACKLIGHT_ON 8 #define SPITZ_SCP2_MIC_BIAS 9 -static void spitz_scoop_gpio_setup(PXA2xxState *cpu, - DeviceState *scp0, DeviceState *scp1) +static void spitz_scoop_gpio_setup(SpitzMachineState *sms) { - qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8); + qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, sms->mpu, 8); - qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); - qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, outsignals[1]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); - if (scp1) { - qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]); - qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]); + if (sms->scp1) { + qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, + outsignals[4]); + qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, + outsignals[5]); } - qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } #define SPITZ_GPIO_HSYNC 22 @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) SpitzMachineState *sms = SPITZ_MACHINE(machine); enum spitz_model_e model = smc->model; PXA2xxState *mpu; - DeviceState *scp0, *scp1 = NULL; MemoryRegion *address_space_mem = get_system_memory(); MemoryRegion *rom = g_new(MemoryRegion, 1); @@ -XXX,XX +XXX,XX @@ static void spitz_common_init(MachineState *machine) spitz_ssp_attach(sms); - scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); + sms->scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); if (model != akita) { - scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); + sms->scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); + } else { + sms->scp1 = NULL; } - spitz_scoop_gpio_setup(mpu, scp0, scp1); + spitz_scoop_gpio_setup(sms); spitz_gpio_setup(mpu, (model == akita) ? 1 : 2); -- 2.20.1 Currently the Spitz board uses a nasty hack for the GPIO lines that pass "bit5" and "power" information to the LCD controller: the lcdtg realize function sets a global variable to point to the instance it just realized, and then the functions spitz_bl_power() and spitz_bl_bit5() use that to find the device they are changing the internal state of. There is a comment reading: FIXME: Implement GPIO properly and remove this hack. which was added in 2009. Implement GPIO properly and remove this hack. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-6-peter.maydell@linaro.org --- hw/arm/spitz.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_bl_update(SpitzLCDTG *s) zaurus_printf("LCD Backlight now off\n"); } -/* FIXME: Implement GPIO properly and remove this hack. */ -static SpitzLCDTG *spitz_lcdtg; - static inline void spitz_bl_bit5(void *opaque, int line, int level) { - SpitzLCDTG *s = spitz_lcdtg; + SpitzLCDTG *s = opaque; int prev = s->bl_intensity; if (level) @@ -XXX,XX +XXX,XX @@ static inline void spitz_bl_bit5(void *opaque, int line, int level) static inline void spitz_bl_power(void *opaque, int line, int level) { - SpitzLCDTG *s = spitz_lcdtg; + SpitzLCDTG *s = opaque; s->bl_power = !!level; spitz_bl_update(s); } @@ -XXX,XX +XXX,XX @@ static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) return 0; } -static void spitz_lcdtg_realize(SSISlave *dev, Error **errp) +static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); + SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, ssi); + DeviceState *dev = DEVICE(s); - spitz_lcdtg = s; s->bl_power = 0; s->bl_intensity = 0x20; + + qdev_init_gpio_in_named(dev, spitz_bl_bit5, "bl_bit5", 1); + qdev_init_gpio_in_named(dev, spitz_bl_power, "bl_power", 1); } /* SSP devices */ @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) case 3: zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); break; - case 4: - spitz_bl_bit5(opaque, line, level); - break; - case 5: - spitz_bl_power(opaque, line, level); - break; case 6: spitz_adc_temp_on(opaque, line, level); break; + default: + g_assert_not_reached(); } } @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(SpitzMachineState *sms) if (sms->scp1) { qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, - outsignals[4]); + qdev_get_gpio_in_named(sms->lcdtg, "bl_bit5", 0)); qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, - outsignals[5]); + qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0)); } qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); -- 2.20.1 Add some QOM properties to the max111x ADC device to allow the initial values to be configured. Currently this is done by board code calling max111x_set_input() after it creates the device, which doesn't work on system reset. This requires us to implement a reset method for this device, so while we're doing that make sure we reset the other parts of the device state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-7-peter.maydell@linaro.org --- hw/misc/max111x.c | 57 ++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 10 deletions(-) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ #include "hw/ssi/ssi.h" #include "migration/vmstate.h" #include "qemu/module.h" +#include "hw/qdev-properties.h" typedef struct { SSISlave parent_obj; qemu_irq interrupt; + /* Values of inputs at system reset (settable by QOM property) */ + uint8_t reset_input[8]; + uint8_t tb1, rb2, rb3; int cycle; @@ -XXX,XX +XXX,XX @@ static int max111x_init(SSISlave *d, int inputs) qdev_init_gpio_out(dev, &s->interrupt, 1); s->inputs = inputs; - /* TODO: add a user interface for setting these */ - s->input[0] = 0xf0; - s->input[1] = 0xe0; - s->input[2] = 0xd0; - s->input[3] = 0xc0; - s->input[4] = 0xb0; - s->input[5] = 0xa0; - s->input[6] = 0x90; - s->input[7] = 0x80; - s->com = 0; vmstate_register(VMSTATE_IF(dev), VMSTATE_INSTANCE_ID_ANY, &vmstate_max111x, s); @@ -XXX,XX +XXX,XX @@ void max111x_set_input(DeviceState *dev, int line, uint8_t value) s->input[line] = value; } +static void max111x_reset(DeviceState *dev) +{ + MAX111xState *s = MAX_111X(dev); + int i; + + for (i = 0; i < s->inputs; i++) { + s->input[i] = s->reset_input[i]; + } + s->com = 0; + s->tb1 = 0; + s->rb2 = 0; + s->rb3 = 0; + s->cycle = 0; +} + +static Property max1110_properties[] = { + /* Reset values for ADC inputs */ + DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), + DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), + DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), + DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), + DEFINE_PROP_END_OF_LIST(), +}; + +static Property max1111_properties[] = { + /* Reset values for ADC inputs */ + DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0), + DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0), + DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0), + DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0), + DEFINE_PROP_UINT8("input4", MAX111xState, reset_input[4], 0xb0), + DEFINE_PROP_UINT8("input5", MAX111xState, reset_input[5], 0xa0), + DEFINE_PROP_UINT8("input6", MAX111xState, reset_input[6], 0x90), + DEFINE_PROP_UINT8("input7", MAX111xState, reset_input[7], 0x80), + DEFINE_PROP_END_OF_LIST(), +}; + static void max111x_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->transfer = max111x_transfer; + dc->reset = max111x_reset; } static const TypeInfo max111x_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo max111x_info = { static void max1110_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->realize = max1110_realize; + device_class_set_props(dc, max1110_properties); } static const TypeInfo max1110_info = { @@ -XXX,XX +XXX,XX @@ static const TypeInfo max1110_info = { static void max1111_class_init(ObjectClass *klass, void *data) { SSISlaveClass *k = SSI_SLAVE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); k->realize = max1111_realize; + device_class_set_props(dc, max1111_properties); } static const TypeInfo max1111_info = { -- 2.20.1 The max111x is a proper qdev device; we can use dc->vmsd rather than directly calling vmstate_register(). It's possible that this is a migration compat break, but the only boards that use this device are the spitz-family ('akita', 'borzoi', 'spitz', 'terrier'). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-8-peter.maydell@linaro.org --- hw/misc/max111x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ static int max111x_init(SSISlave *d, int inputs) s->inputs = inputs; - vmstate_register(VMSTATE_IF(dev), VMSTATE_INSTANCE_ID_ANY, - &vmstate_max111x, s); return 0; } @@ -XXX,XX +XXX,XX @@ static void max111x_class_init(ObjectClass *klass, void *data) k->transfer = max111x_transfer; dc->reset = max111x_reset; + dc->vmsd = &vmstate_max111x; } static const TypeInfo max111x_info = { -- 2.20.1 Add an ssi_realize_and_unref(), for the benefit of callers who want to be able to create an SSI device, set QOM properties on it, and then do the realize-and-unref afterwards. The API works on the same principle as the recently added qdev_realize_and_undef(), sysbus_realize_and_undef(), etc. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-9-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 26 ++++++++++++++++++++++++++ hw/ssi/ssi.c | 7 ++++++- 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ extern const VMStateDescription vmstate_ssi_slave; } DeviceState *ssi_create_slave(SSIBus *bus, const char *name); +/** + * ssi_realize_and_unref: realize and unref an SSI slave device + * @dev: SSI slave device to realize + * @bus: SSI bus to put it on + * @errp: error pointer + * + * Call 'realize' on @dev, put it on the specified @bus, and drop the + * reference to it. Errors are reported via @errp and by returning + * false. + * + * This function is useful if you have created @dev via qdev_new() + * (which takes a reference to the device it returns to you), so that + * you can set properties on it before realizing it. If you don't need + * to set properties then ssi_create_slave() is probably better (as it + * does the create, init and realize in one step). + * + * If you are embedding the SSI slave into another QOM device and + * initialized it via some variant on object_initialize_child() then + * do not use this function, because that family of functions arrange + * for the only reference to the child device to be held by the parent + * via the child<> property, and so the reference-count-drop done here + * would be incorrect. (Instead you would want ssi_realize(), which + * doesn't currently exist but would be trivial to create if we had + * any code that wanted it.) + */ +bool ssi_realize_and_unref(DeviceState *dev, SSIBus *bus, Error **errp); /* Master interface. */ SSIBus *ssi_create_bus(DeviceState *parent, const char *name); diff --git a/hw/ssi/ssi.c b/hw/ssi/ssi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/ssi.c +++ b/hw/ssi/ssi.c @@ -XXX,XX +XXX,XX @@ static const TypeInfo ssi_slave_info = { .abstract = true, }; +bool ssi_realize_and_unref(DeviceState *dev, SSIBus *bus, Error **errp) +{ + return qdev_realize_and_unref(dev, &bus->parent_obj, errp); +} + DeviceState *ssi_create_slave(SSIBus *bus, const char *name) { DeviceState *dev = qdev_new(name); - qdev_realize_and_unref(dev, &bus->parent_obj, &error_fatal); + ssi_realize_and_unref(dev, bus, &error_fatal); return dev; } -- 2.20.1 Use the new max111x qdev properties to set the initial input values rather than calling max111x_set_input(); this means that on system reset the inputs will correctly return to their initial values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-10-peter.maydell@linaro.org --- hw/arm/spitz.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); bus = qdev_get_child_bus(sms->mux, "ssi2"); - sms->max1111 = ssi_create_slave(bus, "max1111"); + sms->max1111 = qdev_new("max1111"); max1111 = sms->max1111; - max111x_set_input(sms->max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT); - max111x_set_input(sms->max1111, MAX1111_BATT_TEMP, 0); - max111x_set_input(sms->max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN); + qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, + SPITZ_BATTERY_VOLT); + qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0); + qdev_prop_set_uint8(sms->max1111, "input3" /* ACIN_VOLT */, + SPITZ_CHARGEON_ACIN); + ssi_realize_and_unref(sms->max1111, bus, &error_fatal); qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS, qdev_get_gpio_in(sms->mux, 0)); -- 2.20.1 The max111x ADC device model allows other code to set the level on the 8 ADC inputs using the max111x_set_input() function. Replace this with generic qdev GPIO inputs, which also allow inputs to be set to arbitrary values. Using GPIO lines will make it easier for board code to wire things up, so that if device A wants to set the ADC input it doesn't need to have a direct pointer to the max111x but can just set that value on its output GPIO, which is then wired up by the board to the appropriate max111x input. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-11-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 3 --- hw/arm/spitz.c | 9 +++++---- hw/misc/max111x.c | 16 +++++++++------- 3 files changed, 14 insertions(+), 14 deletions(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ SSIBus *ssi_create_bus(DeviceState *parent, const char *name); uint32_t ssi_transfer(SSIBus *bus, uint32_t val); -/* max111x.c */ -void max111x_set_input(DeviceState *dev, int line, uint8_t value); - #endif diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) static void spitz_adc_temp_on(void *opaque, int line, int level) { + int batt_temp; + if (!max1111) return; - if (level) - max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP); - else - max111x_set_input(max1111, MAX1111_BATT_TEMP, 0); + batt_temp = level ? SPITZ_BATTERY_TEMP : 0; + + qemu_set_irq(qdev_get_gpio_in(max1111, MAX1111_BATT_TEMP), batt_temp); } static void corgi_ssp_realize(SSISlave *d, Error **errp) diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_max111x = { } }; +static void max111x_input_set(void *opaque, int line, int value) +{ + MAX111xState *s = MAX_111X(opaque); + + assert(line >= 0 && line < s->inputs); + s->input[line] = value; +} + static int max111x_init(SSISlave *d, int inputs) { DeviceState *dev = DEVICE(d); MAX111xState *s = MAX_111X(dev); qdev_init_gpio_out(dev, &s->interrupt, 1); + qdev_init_gpio_in(dev, max111x_input_set, inputs); s->inputs = inputs; @@ -XXX,XX +XXX,XX @@ static void max1111_realize(SSISlave *dev, Error **errp) max111x_init(dev, 4); } -void max111x_set_input(DeviceState *dev, int line, uint8_t value) -{ - MAX111xState *s = MAX_111X(dev); - assert(line >= 0 && line < s->inputs); - s->input[line] = value; -} - static void max111x_reset(DeviceState *dev) { MAX111xState *s = MAX_111X(dev); -- 2.20.1 Create a header file for the hw/misc/max111x device, in the usual modern style for QOM devices: * definition of the TYPE_ constants and macros * definition of the device's state struct so that it can be embedded in other structs if desired * documentation of the interface This allows us to use TYPE_MAX_1111 in the spitz.c code rather than the string "max1111". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200628142429.17111-12-peter.maydell@linaro.org --- include/hw/misc/max111x.h | 56 +++++++++++++++++++++++++++++++++++++++ hw/arm/spitz.c | 3 ++- hw/misc/max111x.c | 24 +---------------- MAINTAINERS | 1 + 4 files changed, 60 insertions(+), 24 deletions(-) create mode 100644 include/hw/misc/max111x.h diff --git a/include/hw/misc/max111x.h b/include/hw/misc/max111x.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/max111x.h @@ -XXX,XX +XXX,XX @@ +/* + * Maxim MAX1110/1111 ADC chip emulation. + * + * Copyright (c) 2006 Openedhand Ltd. + * Written by Andrzej Zaborowski <balrog@zabor.org> + * + * This code is licensed under the GNU GPLv2. + * + * Contributions after 2012-01-13 are licensed under the terms of the + * GNU GPL, version 2 or (at your option) any later version. + */ + +#ifndef HW_MISC_MAX111X_H +#define HW_MISC_MAX111X_H + +#include "hw/ssi/ssi.h" + +/* + * This is a model of the Maxim MAX1110/1111 ADC chip, which for QEMU + * is an SSI slave device. It has either 4 (max1110) or 8 (max1111) + * 8-bit ADC channels. + * + * QEMU interface: + * + GPIO inputs 0..3 (for max1110) or 0..7 (for max1111): set the value + * of each ADC input, as an unsigned 8-bit value + * + GPIO output 0: interrupt line + * + Properties "input0" to "input3" (max1110) or "input0" to "input7" + * (max1111): initial reset values for ADC inputs. + * + * Known bugs: + * + the interrupt line is not correctly implemented, and will never + * be lowered once it has been asserted. + */ +typedef struct { + SSISlave parent_obj; + + qemu_irq interrupt; + /* Values of inputs at system reset (settable by QOM property) */ + uint8_t reset_input[8]; + + uint8_t tb1, rb2, rb3; + int cycle; + + uint8_t input[8]; + int inputs, com; +} MAX111xState; + +#define TYPE_MAX_111X "max111x" + +#define MAX_111X(obj) \ + OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X) + +#define TYPE_MAX_1110 "max1110" +#define TYPE_MAX_1111 "max1111" + +#endif diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "audio/audio.h" #include "hw/boards.h" #include "hw/sysbus.h" +#include "hw/misc/max111x.h" #include "migration/vmstate.h" #include "exec/address-spaces.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); bus = qdev_get_child_bus(sms->mux, "ssi2"); - sms->max1111 = qdev_new("max1111"); + sms->max1111 = qdev_new(TYPE_MAX_1111); max1111 = sms->max1111; qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, SPITZ_BATTERY_VOLT); diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/max111x.c +++ b/hw/misc/max111x.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "hw/misc/max111x.h" #include "hw/irq.h" -#include "hw/ssi/ssi.h" #include "migration/vmstate.h" #include "qemu/module.h" #include "hw/qdev-properties.h" -typedef struct { - SSISlave parent_obj; - - qemu_irq interrupt; - /* Values of inputs at system reset (settable by QOM property) */ - uint8_t reset_input[8]; - - uint8_t tb1, rb2, rb3; - int cycle; - - uint8_t input[8]; - int inputs, com; -} MAX111xState; - -#define TYPE_MAX_111X "max111x" - -#define MAX_111X(obj) \ - OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X) - -#define TYPE_MAX_1110 "max1110" -#define TYPE_MAX_1111 "max1111" - /* Control-byte bitfields */ #define CB_PD0 (1 << 0) #define CB_PD1 (1 << 1) diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/gpio/max7310.c F: hw/gpio/zaurus.c F: hw/misc/mst_fpga.c F: hw/misc/max111x.c +F: include/hw/misc/max111x.h F: include/hw/arm/pxa.h F: include/hw/arm/sharpsl.h F: include/hw/display/tc6393xb.h -- 2.20.1 Currently we have a free-floating set of IRQs and a function spitz_out_switch() which handle some miscellaneous GPIO lines for the spitz board. Encapsulate this behaviour in a simple QOM device. At this point we can finally remove the 'max1111' global, because the ADC battery-temperature value is now handled by the misc-gpio device writing the value to its outbound "adc-temp" GPIO, which the board code wires up to the appropriate inbound GPIO line on the max1111. This commit also fixes Coverity issue CID 1421913 (which pointed out that the 'outsignals' in spitz_scoop_gpio_setup() were leaked), because it removes the use of the qemu_allocate_irqs() API from this code entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-13-peter.maydell@linaro.org --- hw/arm/spitz.c | 129 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 87 insertions(+), 42 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { DeviceState *max1111; DeviceState *scp0; DeviceState *scp1; + DeviceState *misc_gpio; } SpitzMachineState; #define TYPE_SPITZ_MACHINE "spitz-common" @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) #define SPITZ_GPIO_MAX1111_CS 20 #define SPITZ_GPIO_TP_INT 11 -static DeviceState *max1111; - /* "Demux" the signal based on current chipselect */ typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ -static void spitz_adc_temp_on(void *opaque, int line, int level) -{ - int batt_temp; - - if (!max1111) - return; - - batt_temp = level ? SPITZ_BATTERY_TEMP : 0; - - qemu_set_irq(qdev_get_gpio_in(max1111, MAX1111_BATT_TEMP), batt_temp); -} - static void corgi_ssp_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) bus = qdev_get_child_bus(sms->mux, "ssi2"); sms->max1111 = qdev_new(TYPE_MAX_1111); - max1111 = sms->max1111; qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, SPITZ_BATTERY_VOLT); qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0); @@ -XXX,XX +XXX,XX @@ static void spitz_akita_i2c_setup(PXA2xxState *cpu) /* Other peripherals */ -static void spitz_out_switch(void *opaque, int line, int level) +/* + * Encapsulation of some miscellaneous GPIO line behaviour for the Spitz boards. + * + * QEMU interface: + * + named GPIO inputs "green-led", "orange-led", "charging", "discharging": + * these currently just print messages that the line has been signalled + * + named GPIO input "adc-temp-on": set to cause the battery-temperature + * value to be passed to the max111x ADC + * + named GPIO output "adc-temp": the ADC value, to be wired up to the max111x + */ +#define TYPE_SPITZ_MISC_GPIO "spitz-misc-gpio" +#define SPITZ_MISC_GPIO(obj) \ + OBJECT_CHECK(SpitzMiscGPIOState, (obj), TYPE_SPITZ_MISC_GPIO) + +typedef struct SpitzMiscGPIOState { + SysBusDevice parent_obj; + + qemu_irq adc_value; +} SpitzMiscGPIOState; + +static void spitz_misc_charging(void *opaque, int n, int level) { - switch (line) { - case 0: - zaurus_printf("Charging %s.\n", level ? "off" : "on"); - break; - case 1: - zaurus_printf("Discharging %s.\n", level ? "on" : "off"); - break; - case 2: - zaurus_printf("Green LED %s.\n", level ? "on" : "off"); - break; - case 3: - zaurus_printf("Orange LED %s.\n", level ? "on" : "off"); - break; - case 6: - spitz_adc_temp_on(opaque, line, level); - break; - default: - g_assert_not_reached(); - } + zaurus_printf("Charging %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_discharging(void *opaque, int n, int level) +{ + zaurus_printf("Discharging %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_green_led(void *opaque, int n, int level) +{ + zaurus_printf("Green LED %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_orange_led(void *opaque, int n, int level) +{ + zaurus_printf("Orange LED %s.\n", level ? "off" : "on"); +} + +static void spitz_misc_adc_temp(void *opaque, int n, int level) +{ + SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(opaque); + int batt_temp = level ? SPITZ_BATTERY_TEMP : 0; + + qemu_set_irq(s->adc_value, batt_temp); +} + +static void spitz_misc_gpio_init(Object *obj) +{ + SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(obj); + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, spitz_misc_charging, "charging", 1); + qdev_init_gpio_in_named(dev, spitz_misc_discharging, "discharging", 1); + qdev_init_gpio_in_named(dev, spitz_misc_green_led, "green-led", 1); + qdev_init_gpio_in_named(dev, spitz_misc_orange_led, "orange-led", 1); + qdev_init_gpio_in_named(dev, spitz_misc_adc_temp, "adc-temp-on", 1); + + qdev_init_gpio_out_named(dev, &s->adc_value, "adc-temp", 1); } #define SPITZ_SCP_LED_GREEN 1 @@ -XXX,XX +XXX,XX @@ static void spitz_out_switch(void *opaque, int line, int level) static void spitz_scoop_gpio_setup(SpitzMachineState *sms) { - qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, sms->mpu, 8); + DeviceState *miscdev = sysbus_create_simple(TYPE_SPITZ_MISC_GPIO, -1, NULL); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, outsignals[0]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, outsignals[1]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, outsignals[2]); - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]); + sms->misc_gpio = miscdev; + + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, + qdev_get_gpio_in_named(miscdev, "charging", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, + qdev_get_gpio_in_named(miscdev, "discharging", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, + qdev_get_gpio_in_named(miscdev, "green-led", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, + qdev_get_gpio_in_named(miscdev, "orange-led", 0)); + qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, + qdev_get_gpio_in_named(miscdev, "adc-temp-on", 0)); + qdev_connect_gpio_out_named(miscdev, "adc-temp", 0, + qdev_get_gpio_in(sms->max1111, MAX1111_BATT_TEMP)); if (sms->scp1) { qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, @@ -XXX,XX +XXX,XX @@ static void spitz_scoop_gpio_setup(SpitzMachineState *sms) qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0)); } - - qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]); } #define SPITZ_GPIO_HSYNC 22 @@ -XXX,XX +XXX,XX @@ static const TypeInfo spitz_lcdtg_info = { .class_init = spitz_lcdtg_class_init, }; +static const TypeInfo spitz_misc_gpio_info = { + .name = TYPE_SPITZ_MISC_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(SpitzMiscGPIOState), + .instance_init = spitz_misc_gpio_init, + /* + * No class_init required: device has no internal state so does not + * need to set up reset or vmstate, and does not have a realize method. + */ +}; + static void spitz_register_types(void) { type_register_static(&corgi_ssp_info); type_register_static(&spitz_lcdtg_info); type_register_static(&spitz_keyboard_info); type_register_static(&sl_nand_info); + type_register_static(&spitz_misc_gpio_info); } type_init(spitz_register_types) -- 2.20.1 Instead of logging guest accesses to invalid register offsets in this device using zaurus_printf() (which just prints to stderr), use the usual qemu_log_mask(LOG_GUEST_ERROR,...). Since this was the only use of the zaurus_printf() macro outside spitz.c, we can move the definition of that macro from sharpsl.h to spitz.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-14-peter.maydell@linaro.org --- include/hw/arm/sharpsl.h | 3 --- hw/arm/spitz.c | 3 +++ hw/gpio/zaurus.c | 12 +++++++----- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/sharpsl.h b/include/hw/arm/sharpsl.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/sharpsl.h +++ b/include/hw/arm/sharpsl.h @@ -XXX,XX +XXX,XX @@ #include "exec/hwaddr.h" -#define zaurus_printf(format, ...) \ - fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) - /* zaurus.c */ #define SL_PXA_PARAM_BASE 0xa0000a00 diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ typedef struct { #define SPITZ_MACHINE_CLASS(klass) \ OBJECT_CLASS_CHECK(SpitzMachineClass, klass, TYPE_SPITZ_MACHINE) +#define zaurus_printf(format, ...) \ + fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) + #undef REG_FMT #define REG_FMT "0x%02lx" diff --git a/hw/gpio/zaurus.c b/hw/gpio/zaurus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/zaurus.c +++ b/hw/gpio/zaurus.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/module.h" - -#undef REG_FMT -#define REG_FMT "0x%02lx" +#include "qemu/log.h" /* SCOOP devices */ @@ -XXX,XX +XXX,XX @@ static uint64_t scoop_read(void *opaque, hwaddr addr, case SCOOP_GPRR: return s->gpio_level; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "scoop_read: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } return 0; @@ -XXX,XX +XXX,XX @@ static void scoop_write(void *opaque, hwaddr addr, scoop_gpio_handler_update(s); break; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "scoop_write: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } } -- 2.20.1 Instead of logging guest accesses to invalid register offsets in the Spitz flash device with zaurus_printf() (which just prints to stderr), use the usual qemu_log_mask(LOG_GUEST_ERROR,...). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-15-peter.maydell@linaro.org --- hw/arm/spitz.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ #include "hw/ssi/ssi.h" #include "hw/block/flash.h" #include "qemu/timer.h" +#include "qemu/log.h" #include "hw/arm/sharpsl.h" #include "ui/console.h" #include "hw/audio/wm8750.h" @@ -XXX,XX +XXX,XX @@ typedef struct { #define zaurus_printf(format, ...) \ fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) -#undef REG_FMT -#define REG_FMT "0x%02lx" - /* Spitz Flash */ #define FLASH_BASE 0x0c000000 #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ @@ -XXX,XX +XXX,XX @@ static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) return ecc_digest(&s->ecc, nand_getio(s->nand)); default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "sl_read: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } return 0; } @@ -XXX,XX +XXX,XX @@ static void sl_write(void *opaque, hwaddr addr, break; default: - zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr); + qemu_log_mask(LOG_GUEST_ERROR, + "sl_write: bad register offset 0x%02" HWADDR_PRIx "\n", + addr); } } -- 2.20.1 Instead of using printf() for logging guest accesses to invalid register offsets in the pxa2xx PIC device, use the usual qemu_log_mask(LOG_GUEST_ERROR,...). This was the only user of the REG_FMT macro in pxa.h, so we can remove that. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-16-peter.maydell@linaro.org --- include/hw/arm/pxa.h | 1 - hw/arm/pxa2xx_pic.c | 9 +++++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/pxa.h b/include/hw/arm/pxa.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/pxa.h +++ b/include/hw/arm/pxa.h @@ -XXX,XX +XXX,XX @@ struct PXA2xxI2SState { }; # define PA_FMT "0x%08lx" -# define REG_FMT "0x" TARGET_FMT_plx PXA2xxState *pxa270_init(MemoryRegion *address_space, unsigned int sdram_size, const char *revision); diff --git a/hw/arm/pxa2xx_pic.c b/hw/arm/pxa2xx_pic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/pxa2xx_pic.c +++ b/hw/arm/pxa2xx_pic.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" #include "qemu/module.h" +#include "qemu/log.h" #include "cpu.h" #include "hw/arm/pxa.h" #include "hw/sysbus.h" @@ -XXX,XX +XXX,XX @@ static uint64_t pxa2xx_pic_mem_read(void *opaque, hwaddr offset, case ICHP: /* Highest Priority register */ return pxa2xx_pic_highest(s); default: - printf("%s: Bad register offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "pxa2xx_pic_mem_read: bad register offset 0x%" HWADDR_PRIx + "\n", offset); return 0; } } @@ -XXX,XX +XXX,XX @@ static void pxa2xx_pic_mem_write(void *opaque, hwaddr offset, s->priority[32 + ((offset - IPR32) >> 2)] = value & 0x8000003f; break; default: - printf("%s: Bad register offset " REG_FMT "\n", __func__, offset); + qemu_log_mask(LOG_GUEST_ERROR, + "pxa2xx_pic_mem_write: bad register offset 0x%" + HWADDR_PRIx "\n", offset); return; } pxa2xx_pic_update(opaque); -- 2.20.1 The QOM types "spitz-lcdtg" and "corgi-ssp" are missing the usual QOM TYPE and casting macros; provide and use them. In particular, we can safely use the QOM cast macros instead of FROM_SSI_SLAVE() because in both cases the 'ssidev' field of the instance state struct is the first field in it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-17-peter.maydell@linaro.org --- hw/arm/spitz.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/hw/arm/spitz.c b/hw/arm/spitz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/spitz.c +++ b/hw/arm/spitz.c @@ -XXX,XX +XXX,XX @@ static void spitz_keyboard_realize(DeviceState *dev, Error **errp) #define LCDTG_PICTRL 0x06 #define LCDTG_POLCTRL 0x07 +#define TYPE_SPITZ_LCDTG "spitz-lcdtg" +#define SPITZ_LCDTG(obj) OBJECT_CHECK(SpitzLCDTG, (obj), TYPE_SPITZ_LCDTG) + typedef struct { SSISlave ssidev; uint32_t bl_intensity; @@ -XXX,XX +XXX,XX @@ static inline void spitz_bl_power(void *opaque, int line, int level) static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev); + SpitzLCDTG *s = SPITZ_LCDTG(dev); int addr; addr = value >> 5; value &= 0x1f; @@ -XXX,XX +XXX,XX @@ static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) { - SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, ssi); + SpitzLCDTG *s = SPITZ_LCDTG(ssi); DeviceState *dev = DEVICE(s); s->bl_power = 0; @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) #define SPITZ_GPIO_MAX1111_CS 20 #define SPITZ_GPIO_TP_INT 11 +#define TYPE_CORGI_SSP "corgi-ssp" +#define CORGI_SSP(obj) OBJECT_CHECK(CorgiSSPState, (obj), TYPE_CORGI_SSP) + /* "Demux" the signal based on current chipselect */ typedef struct { SSISlave ssidev; @@ -XXX,XX +XXX,XX @@ typedef struct { static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value) { - CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev); + CorgiSSPState *s = CORGI_SSP(dev); int i; for (i = 0; i < 3; i++) { @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level) static void corgi_ssp_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, d); + CorgiSSPState *s = CORGI_SSP(d); qdev_init_gpio_in(dev, corgi_ssp_gpio_cs, 3); s->bus[0] = ssi_create_bus(dev, "ssi0"); @@ -XXX,XX +XXX,XX @@ static void spitz_ssp_attach(SpitzMachineState *sms) { void *bus; - sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp"); + sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], + TYPE_CORGI_SSP); bus = qdev_get_child_bus(sms->mux, "ssi0"); - sms->lcdtg = ssi_create_slave(bus, "spitz-lcdtg"); + sms->lcdtg = ssi_create_slave(bus, TYPE_SPITZ_LCDTG); bus = qdev_get_child_bus(sms->mux, "ssi1"); sms->ads7846 = ssi_create_slave(bus, "ads7846"); @@ -XXX,XX +XXX,XX @@ static void corgi_ssp_class_init(ObjectClass *klass, void *data) } static const TypeInfo corgi_ssp_info = { - .name = "corgi-ssp", + .name = TYPE_CORGI_SSP, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(CorgiSSPState), .class_init = corgi_ssp_class_init, @@ -XXX,XX +XXX,XX @@ static void spitz_lcdtg_class_init(ObjectClass *klass, void *data) } static const TypeInfo spitz_lcdtg_info = { - .name = "spitz-lcdtg", + .name = TYPE_SPITZ_LCDTG, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(SpitzLCDTG), .class_init = spitz_lcdtg_class_init, -- 2.20.1 The FROM_SSI_SLAVE() macro predates QOM and is used as a typesafe way to cast from an SSISlave* to the instance struct of a subtype of TYPE_SSI_SLAVE. Switch to using the QOM cast macros instead, which have the same effect (by writing the QOM macros if the types were previously missing them.) (The FROM_SSI_SLAVE() macro allows the SSISlave member of the subtype's struct to be anywhere as long as it is named "ssidev", whereas a QOM cast macro insists that it is the first thing in the subtype's struct. This is true for all the types we convert here.) This removes all the uses of FROM_SSI_SLAVE() so we can delete the definition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200628142429.17111-18-peter.maydell@linaro.org --- include/hw/ssi/ssi.h | 2 -- hw/arm/z2.c | 11 +++++++---- hw/display/ads7846.c | 9 ++++++--- hw/display/ssd0323.c | 10 +++++++--- hw/sd/ssi-sd.c | 4 ++-- 5 files changed, 22 insertions(+), 14 deletions(-) diff --git a/include/hw/ssi/ssi.h b/include/hw/ssi/ssi.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/ssi.h +++ b/include/hw/ssi/ssi.h @@ -XXX,XX +XXX,XX @@ struct SSISlave { bool cs; }; -#define FROM_SSI_SLAVE(type, dev) DO_UPCAST(type, ssidev, dev) - extern const VMStateDescription vmstate_ssi_slave; #define VMSTATE_SSI_SLAVE(_field, _state) { \ diff --git a/hw/arm/z2.c b/hw/arm/z2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/z2.c +++ b/hw/arm/z2.c @@ -XXX,XX +XXX,XX @@ typedef struct { int pos; } ZipitLCD; +#define TYPE_ZIPIT_LCD "zipit-lcd" +#define ZIPIT_LCD(obj) OBJECT_CHECK(ZipitLCD, (obj), TYPE_ZIPIT_LCD) + static uint32_t zipit_lcd_transfer(SSISlave *dev, uint32_t value) { - ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev); + ZipitLCD *z = ZIPIT_LCD(dev); uint16_t val; if (z->selected) { z->buf[z->pos] = value & 0xff; @@ -XXX,XX +XXX,XX @@ static void z2_lcd_cs(void *opaque, int line, int level) static void zipit_lcd_realize(SSISlave *dev, Error **errp) { - ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev); + ZipitLCD *z = ZIPIT_LCD(dev); z->selected = 0; z->enabled = 0; z->pos = 0; @@ -XXX,XX +XXX,XX @@ static void zipit_lcd_class_init(ObjectClass *klass, void *data) } static const TypeInfo zipit_lcd_info = { - .name = "zipit-lcd", + .name = TYPE_ZIPIT_LCD, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ZipitLCD), .class_init = zipit_lcd_class_init, @@ -XXX,XX +XXX,XX @@ static void z2_init(MachineState *machine) type_register_static(&zipit_lcd_info); type_register_static(&aer915_info); - z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd"); + z2_lcd = ssi_create_slave(mpu->ssp[1], TYPE_ZIPIT_LCD); bus = pxa2xx_i2c_bus(mpu->i2c[0]); i2c_create_slave(bus, TYPE_AER915, 0x55); wm = i2c_create_slave(bus, TYPE_WM8750, 0x1b); diff --git a/hw/display/ads7846.c b/hw/display/ads7846.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/ads7846.c +++ b/hw/display/ads7846.c @@ -XXX,XX +XXX,XX @@ typedef struct { int output; } ADS7846State; +#define TYPE_ADS7846 "ads7846" +#define ADS7846(obj) OBJECT_CHECK(ADS7846State, (obj), TYPE_ADS7846) + /* Control-byte bitfields */ #define CB_PD0 (1 << 0) #define CB_PD1 (1 << 1) @@ -XXX,XX +XXX,XX @@ static void ads7846_int_update(ADS7846State *s) static uint32_t ads7846_transfer(SSISlave *dev, uint32_t value) { - ADS7846State *s = FROM_SSI_SLAVE(ADS7846State, dev); + ADS7846State *s = ADS7846(dev); switch (s->cycle ++) { case 0: @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ads7846 = { static void ads7846_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - ADS7846State *s = FROM_SSI_SLAVE(ADS7846State, d); + ADS7846State *s = ADS7846(d); qdev_init_gpio_out(dev, &s->interrupt, 1); @@ -XXX,XX +XXX,XX @@ static void ads7846_class_init(ObjectClass *klass, void *data) } static const TypeInfo ads7846_info = { - .name = "ads7846", + .name = TYPE_ADS7846, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ADS7846State), .class_init = ads7846_class_init, diff --git a/hw/display/ssd0323.c b/hw/display/ssd0323.c index XXXXXXX..XXXXXXX 100644 --- a/hw/display/ssd0323.c +++ b/hw/display/ssd0323.c @@ -XXX,XX +XXX,XX @@ typedef struct { uint8_t framebuffer[128 * 80 / 2]; } ssd0323_state; +#define TYPE_SSD0323 "ssd0323" +#define SSD0323(obj) OBJECT_CHECK(ssd0323_state, (obj), TYPE_SSD0323) + + static uint32_t ssd0323_transfer(SSISlave *dev, uint32_t data) { - ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, dev); + ssd0323_state *s = SSD0323(dev); switch (s->mode) { case SSD0323_DATA: @@ -XXX,XX +XXX,XX @@ static const GraphicHwOps ssd0323_ops = { static void ssd0323_realize(SSISlave *d, Error **errp) { DeviceState *dev = DEVICE(d); - ssd0323_state *s = FROM_SSI_SLAVE(ssd0323_state, d); + ssd0323_state *s = SSD0323(d); s->col_end = 63; s->row_end = 79; @@ -XXX,XX +XXX,XX @@ static void ssd0323_class_init(ObjectClass *klass, void *data) } static const TypeInfo ssd0323_info = { - .name = "ssd0323", + .name = TYPE_SSD0323, .parent = TYPE_SSI_SLAVE, .instance_size = sizeof(ssd0323_state), .class_init = ssd0323_class_init, diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/ssi-sd.c +++ b/hw/sd/ssi-sd.c @@ -XXX,XX +XXX,XX @@ typedef struct { static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) { - ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev); + ssi_sd_state *s = SSI_SD(dev); /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */ if (s->mode == SSI_SD_DATA_READ && val == 0x4d) { @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_ssi_sd = { static void ssi_sd_realize(SSISlave *d, Error **errp) { - ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, d); + ssi_sd_state *s = SSI_SD(d); DeviceState *carddev; DriveInfo *dinfo; Error *err = NULL; -- 2.20.1 Deprecate our TileGX target support: * we have no active maintainer for it * it has had essentially no contributions (other than tree-wide cleanups and similar) since it was first added * the Linux kernel dropped support in 2018, as has glibc Note the deprecation in the manual, but don't try to print a warning when QEMU runs -- printing unsuppressable messages is more obtrusive for linux-user mode than it would be for system-emulation mode, and it doesn't seem worth trying to invent a new suppressible-error system for linux-user just for this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20200619154831.26319-1-peter.maydell@linaro.org --- docs/system/deprecated.rst | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/docs/system/deprecated.rst b/docs/system/deprecated.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/deprecated.rst +++ b/docs/system/deprecated.rst @@ -XXX,XX +XXX,XX @@ The above, converted to the current supported format:: json:{"file.driver":"rbd", "file.pool":"rbd", "file.image":"name"} +linux-user mode CPUs +-------------------- + +``tilegx`` CPUs (since 5.1.0) +''''''''''''''''''''''''''''' + +The ``tilegx`` guest CPU support (which was only implemented in +linux-user mode) is deprecated and will be removed in a future version +of QEMU. Support for this CPU was removed from the upstream Linux +kernel in 2018, and has also been dropped from glibc. + Related binaries ---------------- -- 2.20.1