The following changes since commit eae587e8e3694b1aceab23239493fb4c7e1a80f5: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-09-13' into staging (2021-09-13 11:00:30 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210913 for you to fetch changes up to 9a2b2ecf4d25a3943918c95d2db4508b304161b5: hw/arm/mps2.c: Mark internal-only I2C buses as 'full' (2021-09-13 17:09:28 +0100) ---------------------------------------------------------------- target-arm queue: * mark MPS2/MPS3 board-internal i2c buses as 'full' so that command line user-created devices are not plugged into them * Take an exception if PSTATE.IL is set * Support an emulated ITS in the virt board * Add support for kudo-bmc board * Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM * cadence_uart: Fix clock handling issues that prevented u-boot from running ---------------------------------------------------------------- Bin Meng (6): hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase hw/char: cadence_uart: Disable transmit when input clock is disabled hw/char: cadence_uart: Move clock/reset check to uart_can_receive() hw/char: cadence_uart: Convert to memop_with_attrs() ops hw/char: cadence_uart: Ignore access when unclocked or in reset for uart_{read, write}() hw/char: cadence_uart: Log a guest error when device is unclocked or in reset Chris Rauer (1): hw/arm: Add support for kudo-bmc board. Marc Zyngier (1): hw/arm/virt: KVM: Probe for KVM_CAP_ARM_VM_IPA_SIZE when creating scratch VM Peter Maydell (5): target/arm: Take an exception if PSTATE.IL is set qdev: Support marking individual buses as 'full' hw/arm/mps2-tz.c: Add extra data parameter to MakeDevFn hw/arm/mps2-tz.c: Mark internal-only I2C buses as 'full' hw/arm/mps2.c: Mark internal-only I2C buses as 'full' Richard Henderson (1): target/arm: Merge disas_a64_insn into aarch64_tr_translate_insn Shashi Mallela (9): hw/intc: GICv3 ITS initial framework hw/intc: GICv3 ITS register definitions added hw/intc: GICv3 ITS command queue framework hw/intc: GICv3 ITS Command processing hw/intc: GICv3 ITS Feature enablement hw/intc: GICv3 redistributor ITS processing tests/data/acpi/virt: Add IORT files for ITS hw/arm/virt: add ITS support in virt GIC tests/data/acpi/virt: Update IORT files for ITS docs/system/arm/nuvoton.rst | 1 + hw/intc/gicv3_internal.h | 188 ++++- include/hw/arm/virt.h | 2 + include/hw/intc/arm_gicv3_common.h | 13 + include/hw/intc/arm_gicv3_its_common.h | 32 +- include/hw/qdev-core.h | 24 + target/arm/cpu.h | 1 + target/arm/kvm_arm.h | 4 +- target/arm/syndrome.h | 5 + target/arm/translate.h | 2 + hw/arm/mps2-tz.c | 92 ++- hw/arm/mps2.c | 12 +- hw/arm/npcm7xx_boards.c | 34 + hw/arm/virt.c | 29 +- hw/char/cadence_uart.c | 61 +- hw/intc/arm_gicv3.c | 14 + hw/intc/arm_gicv3_common.c | 13 + hw/intc/arm_gicv3_cpuif.c | 7 +- hw/intc/arm_gicv3_dist.c | 5 +- hw/intc/arm_gicv3_its.c | 1322 ++++++++++++++++++++++++++++++++ hw/intc/arm_gicv3_its_common.c | 7 +- hw/intc/arm_gicv3_its_kvm.c | 2 +- hw/intc/arm_gicv3_redist.c | 153 +++- hw/misc/zynq_slcr.c | 31 +- softmmu/qdev-monitor.c | 7 +- target/arm/helper-a64.c | 1 + target/arm/helper.c | 8 + target/arm/kvm.c | 7 +- target/arm/translate-a64.c | 255 +++--- target/arm/translate.c | 21 + hw/intc/meson.build | 1 + tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes 35 files changed, 2144 insertions(+), 210 deletions(-) create mode 100644 hw/intc/arm_gicv3_its.c create mode 100644 tests/data/acpi/virt/IORT create mode 100644 tests/data/acpi/virt/IORT.memhp create mode 100644 tests/data/acpi/virt/IORT.numamem create mode 100644 tests/data/acpi/virt/IORT.pxb From: Bin Meng <bmeng.cn@gmail.com> As of today, when booting upstream U-Boot for Xilinx Zynq, the UART does not receive anything. Debugging shows that the UART input clock frequency is zero which prevents the UART from receiving anything as per the logic in uart_receive(). From zynq_slcr_reset_exit() comment, it intends to compute output clocks according to ps_clk and registers. zynq_slcr_compute_clocks() is called to accomplish the task, inside which device_is_in_reset() is called to actually make the attempt in vain. Rework reset_hold() and reset_exit() so that in the reset exit phase, the logic can really compute output clocks in reset_exit(). With this change, upstream U-Boot boots properly again with: $ qemu-system-arm -M xilinx-zynq-a9 -m 1G -display none -serial null -serial stdio \ -device loader,file=u-boot-dtb.bin,addr=0x4000000,cpu-num=0 Fixes: 38867cb7ec90 ("hw/misc/zynq_slcr: add clock generation for uarts") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210901124521.30599-2-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/zynq_slcr.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/zynq_slcr.c +++ b/hw/misc/zynq_slcr.c @@ -XXX,XX +XXX,XX @@ static uint64_t zynq_slcr_compute_clock(const uint64_t periods[], zynq_slcr_compute_clock((plls), (state)->regs[reg], \ reg ## _ ## enable_field ## _SHIFT) +static void zynq_slcr_compute_clocks_internal(ZynqSLCRState *s, uint64_t ps_clk) +{ + uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]); + uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]); + uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]); + + uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll}; + + /* compute uartX reference clocks */ + clock_set(s->uart0_ref_clk, + ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0)); + clock_set(s->uart1_ref_clk, + ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1)); +} + /** * Compute and set the ouputs clocks periods. * But do not propagate them further. Connected clocks @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_compute_clocks(ZynqSLCRState *s) ps_clk = 0; } - uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]); - uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]); - uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]); - - uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll}; - - /* compute uartX reference clocks */ - clock_set(s->uart0_ref_clk, - ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0)); - clock_set(s->uart1_ref_clk, - ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1)); + zynq_slcr_compute_clocks_internal(s, ps_clk); } /** @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset_hold(Object *obj) ZynqSLCRState *s = ZYNQ_SLCR(obj); /* will disable all output clocks */ - zynq_slcr_compute_clocks(s); + zynq_slcr_compute_clocks_internal(s, 0); zynq_slcr_propagate_clocks(s); } @@ -XXX,XX +XXX,XX @@ static void zynq_slcr_reset_exit(Object *obj) ZynqSLCRState *s = ZYNQ_SLCR(obj); /* will compute output clocks according to ps_clk and registers */ - zynq_slcr_compute_clocks(s); + zynq_slcr_compute_clocks_internal(s, clock_get(s->ps_clk)); zynq_slcr_propagate_clocks(s); } -- 2.20.1 From: Bin Meng <bmeng.cn@gmail.com> At present when input clock is disabled, any character transmitted to tx fifo can still show on the serial line, which is wrong. Fixes: b636db306e06 ("hw/char/cadence_uart: add clock support") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210901124521.30599-3-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/cadence_uart.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ static gboolean cadence_uart_xmit(void *do_not_use, GIOCondition cond, static void uart_write_tx_fifo(CadenceUARTState *s, const uint8_t *buf, int size) { + /* ignore characters when unclocked or in reset */ + if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + return; + } + if ((s->r[R_CR] & UART_CR_TX_DIS) || !(s->r[R_CR] & UART_CR_TX_EN)) { return; } -- 2.20.1 From: Bin Meng <bmeng.cn@gmail.com> Currently the clock/reset check is done in uart_receive(), but we can move the check to uart_can_receive() which is earlier. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210901124521.30599-4-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/cadence_uart.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ static void uart_parameters_setup(CadenceUARTState *s) static int uart_can_receive(void *opaque) { CadenceUARTState *s = opaque; - int ret = MAX(CADENCE_UART_RX_FIFO_SIZE, CADENCE_UART_TX_FIFO_SIZE); - uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE; + int ret; + uint32_t ch_mode; + + /* ignore characters when unclocked or in reset */ + if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + return 0; + } + + ret = MAX(CADENCE_UART_RX_FIFO_SIZE, CADENCE_UART_TX_FIFO_SIZE); + ch_mode = s->r[R_MR] & UART_MR_CHMODE; if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) { ret = MIN(ret, CADENCE_UART_RX_FIFO_SIZE - s->rx_count); @@ -XXX,XX +XXX,XX @@ static void uart_receive(void *opaque, const uint8_t *buf, int size) CadenceUARTState *s = opaque; uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE; - /* ignore characters when unclocked or in reset */ - if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { - return; - } - if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) { uart_write_rx_fifo(opaque, buf, size); } -- 2.20.1 From: Bin Meng <bmeng.cn@gmail.com> This converts uart_read() and uart_write() to memop_with_attrs() ops. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210901124521.30599-5-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/cadence_uart.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ static void uart_read_rx_fifo(CadenceUARTState *s, uint32_t *c) uart_update_status(s); } -static void uart_write(void *opaque, hwaddr offset, - uint64_t value, unsigned size) +static MemTxResult uart_write(void *opaque, hwaddr offset, + uint64_t value, unsigned size, MemTxAttrs attrs) { CadenceUARTState *s = opaque; DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value); offset >>= 2; if (offset >= CADENCE_UART_R_MAX) { - return; + return MEMTX_DECODE_ERROR; } switch (offset) { case R_IER: /* ier (wts imr) */ @@ -XXX,XX +XXX,XX @@ static void uart_write(void *opaque, hwaddr offset, break; } uart_update_status(s); + + return MEMTX_OK; } -static uint64_t uart_read(void *opaque, hwaddr offset, - unsigned size) +static MemTxResult uart_read(void *opaque, hwaddr offset, + uint64_t *value, unsigned size, MemTxAttrs attrs) { CadenceUARTState *s = opaque; uint32_t c = 0; offset >>= 2; if (offset >= CADENCE_UART_R_MAX) { - c = 0; - } else if (offset == R_TX_RX) { + return MEMTX_DECODE_ERROR; + } + if (offset == R_TX_RX) { uart_read_rx_fifo(s, &c); } else { - c = s->r[offset]; + c = s->r[offset]; } DB_PRINT(" offset:%x data:%08x\n", (unsigned)(offset << 2), (unsigned)c); - return c; + *value = c; + return MEMTX_OK; } static const MemoryRegionOps uart_ops = { - .read = uart_read, - .write = uart_write, + .read_with_attrs = uart_read, + .write_with_attrs = uart_write, .endianness = DEVICE_NATIVE_ENDIAN, }; -- 2.20.1 From: Bin Meng <bmeng.cn@gmail.com> Read or write to uart registers when unclocked or in reset should be ignored. Add the check there, and as a result of this, the check in uart_write_tx_fifo() is now unnecessary. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210901124521.30599-6-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/cadence_uart.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ static gboolean cadence_uart_xmit(void *do_not_use, GIOCondition cond, static void uart_write_tx_fifo(CadenceUARTState *s, const uint8_t *buf, int size) { - /* ignore characters when unclocked or in reset */ - if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { - return; - } - if ((s->r[R_CR] & UART_CR_TX_DIS) || !(s->r[R_CR] & UART_CR_TX_EN)) { return; } @@ -XXX,XX +XXX,XX @@ static MemTxResult uart_write(void *opaque, hwaddr offset, { CadenceUARTState *s = opaque; + /* ignore access when unclocked or in reset */ + if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + return MEMTX_ERROR; + } + DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value); offset >>= 2; if (offset >= CADENCE_UART_R_MAX) { @@ -XXX,XX +XXX,XX @@ static MemTxResult uart_read(void *opaque, hwaddr offset, CadenceUARTState *s = opaque; uint32_t c = 0; + /* ignore access when unclocked or in reset */ + if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + return MEMTX_ERROR; + } + offset >>= 2; if (offset >= CADENCE_UART_R_MAX) { return MEMTX_DECODE_ERROR; -- 2.20.1 From: Bin Meng <bmeng.cn@gmail.com> We've got SW that expects FSBL (Bootlooader) to setup clocks and resets. It's quite common that users run that SW on QEMU without FSBL (FSBL typically requires the Xilinx tools installed). That's fine, since users can stil use -device loader to enable clocks etc. To help folks understand what's going, a log (guest-error) message would be helpful here. In particular with the serial port since things will go very quiet if they get things wrong. Suggested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210901124521.30599-7-bmeng.cn@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/char/cadence_uart.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/hw/char/cadence_uart.c b/hw/char/cadence_uart.c index XXXXXXX..XXXXXXX 100644 --- a/hw/char/cadence_uart.c +++ b/hw/char/cadence_uart.c @@ -XXX,XX +XXX,XX @@ static int uart_can_receive(void *opaque) /* ignore characters when unclocked or in reset */ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n", + __func__); return 0; } @@ -XXX,XX +XXX,XX @@ static void uart_event(void *opaque, QEMUChrEvent event) /* ignore characters when unclocked or in reset */ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n", + __func__); return; } @@ -XXX,XX +XXX,XX @@ static MemTxResult uart_write(void *opaque, hwaddr offset, /* ignore access when unclocked or in reset */ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n", + __func__); return MEMTX_ERROR; } @@ -XXX,XX +XXX,XX @@ static MemTxResult uart_read(void *opaque, hwaddr offset, /* ignore access when unclocked or in reset */ if (!clock_is_enabled(s->refclk) || device_is_in_reset(DEVICE(s))) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: uart is unclocked or in reset\n", + __func__); return MEMTX_ERROR; } -- 2.20.1 From: Marc Zyngier <maz@kernel.org> Although we probe for the IPA limits imposed by KVM (and the hardware) when computing the memory map, we still use the old style '0' when creating a scratch VM in kvm_arm_create_scratch_host_vcpu(). On systems that are severely IPA challenged (such as the Apple M1), this results in a failure as KVM cannot use the default 40bit that '0' represents. Instead, probe for the extension and use the reported IPA limit if available. Cc: Andrew Jones <drjones@redhat.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20210822144441.1290891-2-maz@kernel.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try, struct kvm_vcpu_init *init) { int ret = 0, kvmfd = -1, vmfd = -1, cpufd = -1; + int max_vm_pa_size; kvmfd = qemu_open_old("/dev/kvm", O_RDWR); if (kvmfd < 0) { goto err; } - vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0); + max_vm_pa_size = ioctl(kvmfd, KVM_CHECK_EXTENSION, KVM_CAP_ARM_VM_IPA_SIZE); + if (max_vm_pa_size < 0) { + max_vm_pa_size = 0; + } + vmfd = ioctl(kvmfd, KVM_CREATE_VM, max_vm_pa_size); if (vmfd < 0) { goto err; } -- 2.20.1 From: Chris Rauer <crauer@google.com> kudo-bmc is a board supported by OpenBMC. https://github.com/openbmc/openbmc/tree/master/meta-fii/meta-kudo Since v1: - hyphenated Cortex-A9 Tested: Booted kudo firmware. Signed-off-by: Chris Rauer <crauer@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20210907223234.1165705-1-crauer@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/nuvoton.rst | 1 + hw/arm/npcm7xx_boards.c | 34 ++++++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+) diff --git a/docs/system/arm/nuvoton.rst b/docs/system/arm/nuvoton.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/nuvoton.rst +++ b/docs/system/arm/nuvoton.rst @@ -XXX,XX +XXX,XX @@ Hyperscale applications. The following machines are based on this chip : - ``quanta-gbs-bmc`` Quanta GBS server BMC - ``quanta-gsj`` Quanta GSJ server BMC +- ``kudo-bmc`` Fii USA Kudo server BMC There are also two more SoCs, NPCM710 and NPCM705, which are single-core variants of NPCM750 and NPCM730, respectively. These are currently not diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7 #define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff #define QUANTA_GBS_POWER_ON_STRAPS 0x000017ff +#define KUDO_BMC_POWER_ON_STRAPS 0x00001fff static const char npcm7xx_default_bootrom[] = "npcm7xx_bootrom.bin"; @@ -XXX,XX +XXX,XX @@ static void quanta_gbs_init(MachineState *machine) npcm7xx_load_kernel(machine, soc); } +static void kudo_bmc_init(MachineState *machine) +{ + NPCM7xxState *soc; + + soc = npcm7xx_create_soc(machine, KUDO_BMC_POWER_ON_STRAPS); + npcm7xx_connect_dram(soc, machine->ram); + qdev_realize(DEVICE(soc), NULL, &error_fatal); + + npcm7xx_load_bootrom(machine, soc); + npcm7xx_connect_flash(&soc->fiu[0], 0, "mx66u51235f", + drive_get(IF_MTD, 0, 0)); + npcm7xx_connect_flash(&soc->fiu[1], 0, "mx66u51235f", + drive_get(IF_MTD, 3, 0)); + + npcm7xx_load_kernel(machine, soc); +} + static void npcm7xx_set_soc_type(NPCM7xxMachineClass *nmc, const char *type) { NPCM7xxClass *sc = NPCM7XX_CLASS(object_class_by_name(type)); @@ -XXX,XX +XXX,XX @@ static void gbs_bmc_machine_class_init(ObjectClass *oc, void *data) mc->default_ram_size = 1 * GiB; } +static void kudo_bmc_machine_class_init(ObjectClass *oc, void *data) +{ + NPCM7xxMachineClass *nmc = NPCM7XX_MACHINE_CLASS(oc); + MachineClass *mc = MACHINE_CLASS(oc); + + npcm7xx_set_soc_type(nmc, TYPE_NPCM730); + + mc->desc = "Kudo BMC (Cortex-A9)"; + mc->init = kudo_bmc_init; + mc->default_ram_size = 1 * GiB; +}; + static const TypeInfo npcm7xx_machine_types[] = { { .name = TYPE_NPCM7XX_MACHINE, @@ -XXX,XX +XXX,XX @@ static const TypeInfo npcm7xx_machine_types[] = { .name = MACHINE_TYPE_NAME("quanta-gbs-bmc"), .parent = TYPE_NPCM7XX_MACHINE, .class_init = gbs_bmc_machine_class_init, + }, { + .name = MACHINE_TYPE_NAME("kudo-bmc"), + .parent = TYPE_NPCM7XX_MACHINE, + .class_init = kudo_bmc_machine_class_init, }, }; -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Added register definitions relevant to ITS,implemented overall ITS device framework with stubs for ITS control and translater regions read/write,extended ITS common to handle mmio init between existing kvm device and newer qemu device. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Message-id: 20210910143951.92242-2-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 96 +++++++++- include/hw/intc/arm_gicv3_its_common.h | 9 +- hw/intc/arm_gicv3_its.c | 241 +++++++++++++++++++++++++ hw/intc/arm_gicv3_its_common.c | 7 +- hw/intc/arm_gicv3_its_kvm.c | 2 +- hw/intc/meson.build | 1 + 6 files changed, 342 insertions(+), 14 deletions(-) create mode 100644 hw/intc/arm_gicv3_its.c diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #ifndef QEMU_ARM_GICV3_INTERNAL_H #define QEMU_ARM_GICV3_INTERNAL_H +#include "hw/registerfields.h" #include "hw/intc/arm_gicv3_common.h" /* Distributor registers, as offsets from the distributor base address */ @@ -XXX,XX +XXX,XX @@ #define GICD_CTLR_E1NWF (1U << 7) #define GICD_CTLR_RWP (1U << 31) +/* 16 bits EventId */ +#define GICD_TYPER_IDBITS 0xf + /* * Redistributor frame offsets from RD_base */ @@ -XXX,XX +XXX,XX @@ #define GICR_WAKER_ProcessorSleep (1U << 1) #define GICR_WAKER_ChildrenAsleep (1U << 2) -#define GICR_PROPBASER_OUTER_CACHEABILITY_MASK (7ULL << 56) -#define GICR_PROPBASER_ADDR_MASK (0xfffffffffULL << 12) -#define GICR_PROPBASER_SHAREABILITY_MASK (3U << 10) -#define GICR_PROPBASER_CACHEABILITY_MASK (7U << 7) -#define GICR_PROPBASER_IDBITS_MASK (0x1f) +FIELD(GICR_PROPBASER, IDBITS, 0, 5) +FIELD(GICR_PROPBASER, INNERCACHE, 7, 3) +FIELD(GICR_PROPBASER, SHAREABILITY, 10, 2) +FIELD(GICR_PROPBASER, PHYADDR, 12, 40) +FIELD(GICR_PROPBASER, OUTERCACHE, 56, 3) -#define GICR_PENDBASER_PTZ (1ULL << 62) -#define GICR_PENDBASER_OUTER_CACHEABILITY_MASK (7ULL << 56) -#define GICR_PENDBASER_ADDR_MASK (0xffffffffULL << 16) -#define GICR_PENDBASER_SHAREABILITY_MASK (3U << 10) -#define GICR_PENDBASER_CACHEABILITY_MASK (7U << 7) +FIELD(GICR_PENDBASER, INNERCACHE, 7, 3) +FIELD(GICR_PENDBASER, SHAREABILITY, 10, 2) +FIELD(GICR_PENDBASER, PHYADDR, 16, 36) +FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3) +FIELD(GICR_PENDBASER, PTZ, 62, 1) #define ICC_CTLR_EL1_CBPR (1U << 0) #define ICC_CTLR_EL1_EOIMODE (1U << 1) @@ -XXX,XX +XXX,XX @@ #define ICH_VTR_EL2_PREBITS_SHIFT 26 #define ICH_VTR_EL2_PRIBITS_SHIFT 29 +/* ITS Registers */ + +FIELD(GITS_BASER, SIZE, 0, 8) +FIELD(GITS_BASER, PAGESIZE, 8, 2) +FIELD(GITS_BASER, SHAREABILITY, 10, 2) +FIELD(GITS_BASER, PHYADDR, 12, 36) +FIELD(GITS_BASER, PHYADDRL_64K, 16, 32) +FIELD(GITS_BASER, PHYADDRH_64K, 12, 4) +FIELD(GITS_BASER, ENTRYSIZE, 48, 5) +FIELD(GITS_BASER, OUTERCACHE, 53, 3) +FIELD(GITS_BASER, TYPE, 56, 3) +FIELD(GITS_BASER, INNERCACHE, 59, 3) +FIELD(GITS_BASER, INDIRECT, 62, 1) +FIELD(GITS_BASER, VALID, 63, 1) + +FIELD(GITS_CTLR, QUIESCENT, 31, 1) + +FIELD(GITS_TYPER, PHYSICAL, 0, 1) +FIELD(GITS_TYPER, ITT_ENTRY_SIZE, 4, 4) +FIELD(GITS_TYPER, IDBITS, 8, 5) +FIELD(GITS_TYPER, DEVBITS, 13, 5) +FIELD(GITS_TYPER, SEIS, 18, 1) +FIELD(GITS_TYPER, PTA, 19, 1) +FIELD(GITS_TYPER, CIDBITS, 32, 4) +FIELD(GITS_TYPER, CIL, 36, 1) + +#define GITS_BASER_PAGESIZE_4K 0 +#define GITS_BASER_PAGESIZE_16K 1 +#define GITS_BASER_PAGESIZE_64K 2 + +#define GITS_BASER_TYPE_DEVICE 1ULL +#define GITS_BASER_TYPE_COLLECTION 4ULL + +/** + * Default features advertised by this version of ITS + */ +/* Physical LPIs supported */ +#define GITS_TYPE_PHYSICAL (1U << 0) + +/* + * 12 bytes Interrupt translation Table Entry size + * as per Table 5.3 in GICv3 spec + * ITE Lower 8 Bytes + * Bits: | 49 ... 26 | 25 ... 2 | 1 | 0 | + * Values: | 1023 | IntNum | IntType | Valid | + * ITE Higher 4 Bytes + * Bits: | 31 ... 16 | 15 ...0 | + * Values: | vPEID | ICID | + */ +#define ITS_ITT_ENTRY_SIZE 0xC + +/* 16 bits EventId */ +#define ITS_IDBITS GICD_TYPER_IDBITS + +/* 16 bits DeviceId */ +#define ITS_DEVBITS 0xF + +/* 16 bits CollectionId */ +#define ITS_CIDBITS 0xF + +/* + * 8 bytes Device Table Entry size + * Valid = 1 bit,ITTAddr = 44 bits,Size = 5 bits + */ +#define GITS_DTE_SIZE (0x8ULL) + +/* + * 8 bytes Collection Table Entry size + * Valid = 1 bit,RDBase = 36 bits(considering max RDBASE) + */ +#define GITS_CTE_SIZE (0x8ULL) + /* Special interrupt IDs */ #define INTID_SECURE 1020 #define INTID_NONSECURE 1021 diff --git a/include/hw/intc/arm_gicv3_its_common.h b/include/hw/intc/arm_gicv3_its_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_its_common.h +++ b/include/hw/intc/arm_gicv3_its_common.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/arm_gicv3_common.h" #include "qom/object.h" +#define TYPE_ARM_GICV3_ITS "arm-gicv3-its" + #define ITS_CONTROL_SIZE 0x10000 #define ITS_TRANS_SIZE 0x10000 #define ITS_SIZE (ITS_CONTROL_SIZE + ITS_TRANS_SIZE) #define GITS_CTLR 0x0 #define GITS_IIDR 0x4 +#define GITS_TYPER 0x8 #define GITS_CBASER 0x80 #define GITS_CWRITER 0x88 #define GITS_CREADR 0x90 #define GITS_BASER 0x100 +#define GITS_TRANSLATER 0x0040 + struct GICv3ITSState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct GICv3ITSState { /* Registers */ uint32_t ctlr; uint32_t iidr; + uint64_t typer; uint64_t cbaser; uint64_t cwriter; uint64_t creadr; @@ -XXX,XX +XXX,XX @@ struct GICv3ITSState { typedef struct GICv3ITSState GICv3ITSState; -void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops); +void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops, + const MemoryRegionOps *tops); #define TYPE_ARM_GICV3_ITS_COMMON "arm-gicv3-its-common" typedef struct GICv3ITSCommonClass GICv3ITSCommonClass; diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ +/* + * ITS emulation for a GICv3-based system + * + * Copyright Linaro.org 2021 + * + * Authors: + * Shashi Mallela <shashi.mallela@linaro.org> + * + * This work is licensed under the terms of the GNU GPL, version 2 or (at your + * option) any later version. See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/qdev-properties.h" +#include "hw/intc/arm_gicv3_its_common.h" +#include "gicv3_internal.h" +#include "qom/object.h" +#include "qapi/error.h" + +typedef struct GICv3ITSClass GICv3ITSClass; +/* This is reusing the GICv3ITSState typedef from ARM_GICV3_ITS_COMMON */ +DECLARE_OBJ_CHECKERS(GICv3ITSState, GICv3ITSClass, + ARM_GICV3_ITS, TYPE_ARM_GICV3_ITS) + +struct GICv3ITSClass { + GICv3ITSCommonClass parent_class; + void (*parent_reset)(DeviceState *dev); +}; + +static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset, + uint64_t data, unsigned size, + MemTxAttrs attrs) +{ + return MEMTX_OK; +} + +static bool its_writel(GICv3ITSState *s, hwaddr offset, + uint64_t value, MemTxAttrs attrs) +{ + bool result = true; + + return result; +} + +static bool its_readl(GICv3ITSState *s, hwaddr offset, + uint64_t *data, MemTxAttrs attrs) +{ + bool result = true; + + return result; +} + +static bool its_writell(GICv3ITSState *s, hwaddr offset, + uint64_t value, MemTxAttrs attrs) +{ + bool result = true; + + return result; +} + +static bool its_readll(GICv3ITSState *s, hwaddr offset, + uint64_t *data, MemTxAttrs attrs) +{ + bool result = true; + + return result; +} + +static MemTxResult gicv3_its_read(void *opaque, hwaddr offset, uint64_t *data, + unsigned size, MemTxAttrs attrs) +{ + GICv3ITSState *s = (GICv3ITSState *)opaque; + bool result; + + switch (size) { + case 4: + result = its_readl(s, offset, data, attrs); + break; + case 8: + result = its_readll(s, offset, data, attrs); + break; + default: + result = false; + break; + } + + if (!result) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid guest read at offset " TARGET_FMT_plx + "size %u\n", __func__, offset, size); + /* + * The spec requires that reserved registers are RAZ/WI; + * so use false returns from leaf functions as a way to + * trigger the guest-error logging but don't return it to + * the caller, or we'll cause a spurious guest data abort. + */ + *data = 0; + } + return MEMTX_OK; +} + +static MemTxResult gicv3_its_write(void *opaque, hwaddr offset, uint64_t data, + unsigned size, MemTxAttrs attrs) +{ + GICv3ITSState *s = (GICv3ITSState *)opaque; + bool result; + + switch (size) { + case 4: + result = its_writel(s, offset, data, attrs); + break; + case 8: + result = its_writell(s, offset, data, attrs); + break; + default: + result = false; + break; + } + + if (!result) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid guest write at offset " TARGET_FMT_plx + "size %u\n", __func__, offset, size); + /* + * The spec requires that reserved registers are RAZ/WI; + * so use false returns from leaf functions as a way to + * trigger the guest-error logging but don't return it to + * the caller, or we'll cause a spurious guest data abort. + */ + } + return MEMTX_OK; +} + +static const MemoryRegionOps gicv3_its_control_ops = { + .read_with_attrs = gicv3_its_read, + .write_with_attrs = gicv3_its_write, + .valid.min_access_size = 4, + .valid.max_access_size = 8, + .impl.min_access_size = 4, + .impl.max_access_size = 8, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const MemoryRegionOps gicv3_its_translation_ops = { + .write_with_attrs = gicv3_its_translation_write, + .valid.min_access_size = 2, + .valid.max_access_size = 4, + .impl.min_access_size = 2, + .impl.max_access_size = 4, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static void gicv3_arm_its_realize(DeviceState *dev, Error **errp) +{ + GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev); + int i; + + for (i = 0; i < s->gicv3->num_cpu; i++) { + if (!(s->gicv3->cpu[i].gicr_typer & GICR_TYPER_PLPIS)) { + error_setg(errp, "Physical LPI not supported by CPU %d", i); + return; + } + } + + gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops); + + /* set the ITS default features supported */ + s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL, + GITS_TYPE_PHYSICAL); + s->typer = FIELD_DP64(s->typer, GITS_TYPER, ITT_ENTRY_SIZE, + ITS_ITT_ENTRY_SIZE - 1); + s->typer = FIELD_DP64(s->typer, GITS_TYPER, IDBITS, ITS_IDBITS); + s->typer = FIELD_DP64(s->typer, GITS_TYPER, DEVBITS, ITS_DEVBITS); + s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIL, 1); + s->typer = FIELD_DP64(s->typer, GITS_TYPER, CIDBITS, ITS_CIDBITS); +} + +static void gicv3_its_reset(DeviceState *dev) +{ + GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev); + GICv3ITSClass *c = ARM_GICV3_ITS_GET_CLASS(s); + + c->parent_reset(dev); + + /* Quiescent bit reset to 1 */ + s->ctlr = FIELD_DP32(s->ctlr, GITS_CTLR, QUIESCENT, 1); + + /* + * setting GITS_BASER0.Type = 0b001 (Device) + * GITS_BASER1.Type = 0b100 (Collection Table) + * GITS_BASER<n>.Type,where n = 3 to 7 are 0b00 (Unimplemented) + * GITS_BASER<0,1>.Page_Size = 64KB + * and default translation table entry size to 16 bytes + */ + s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, TYPE, + GITS_BASER_TYPE_DEVICE); + s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, PAGESIZE, + GITS_BASER_PAGESIZE_64K); + s->baser[0] = FIELD_DP64(s->baser[0], GITS_BASER, ENTRYSIZE, + GITS_DTE_SIZE - 1); + + s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, TYPE, + GITS_BASER_TYPE_COLLECTION); + s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, PAGESIZE, + GITS_BASER_PAGESIZE_64K); + s->baser[1] = FIELD_DP64(s->baser[1], GITS_BASER, ENTRYSIZE, + GITS_CTE_SIZE - 1); +} + +static Property gicv3_its_props[] = { + DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3", + GICv3State *), + DEFINE_PROP_END_OF_LIST(), +}; + +static void gicv3_its_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass); + + dc->realize = gicv3_arm_its_realize; + device_class_set_props(dc, gicv3_its_props); + device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset); +} + +static const TypeInfo gicv3_its_info = { + .name = TYPE_ARM_GICV3_ITS, + .parent = TYPE_ARM_GICV3_ITS_COMMON, + .instance_size = sizeof(GICv3ITSState), + .class_init = gicv3_its_class_init, + .class_size = sizeof(GICv3ITSClass), +}; + +static void gicv3_its_register_types(void) +{ + type_register_static(&gicv3_its_info); +} + +type_init(gicv3_its_register_types) diff --git a/hw/intc/arm_gicv3_its_common.c b/hw/intc/arm_gicv3_its_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its_common.c +++ b/hw/intc/arm_gicv3_its_common.c @@ -XXX,XX +XXX,XX @@ static int gicv3_its_post_load(void *opaque, int version_id) static const VMStateDescription vmstate_its = { .name = "arm_gicv3_its", + .version_id = 1, + .minimum_version_id = 1, .pre_save = gicv3_its_pre_save, .post_load = gicv3_its_post_load, .priority = MIG_PRI_GICV3_ITS, @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps gicv3_its_trans_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops) +void gicv3_its_init_mmio(GICv3ITSState *s, const MemoryRegionOps *ops, + const MemoryRegionOps *tops) { SysBusDevice *sbd = SYS_BUS_DEVICE(s); memory_region_init_io(&s->iomem_its_cntrl, OBJECT(s), ops, s, "control", ITS_CONTROL_SIZE); memory_region_init_io(&s->iomem_its_translation, OBJECT(s), - &gicv3_its_trans_ops, s, + tops ? tops : &gicv3_its_trans_ops, s, "translation", ITS_TRANS_SIZE); /* Our two regions are always adjacent, therefore we now combine them diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its_kvm.c +++ b/hw/intc/arm_gicv3_its_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_its_realize(DeviceState *dev, Error **errp) kvm_arm_register_device(&s->iomem_its_cntrl, -1, KVM_DEV_ARM_VGIC_GRP_ADDR, KVM_VGIC_ITS_ADDR_TYPE, s->dev_fd, 0); - gicv3_its_init_mmio(s, NULL); + gicv3_its_init_mmio(s, NULL, NULL); if (!kvm_device_check_attr(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_ITS_REGS, GITS_CTLR)) { diff --git a/hw/intc/meson.build b/hw/intc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/meson.build +++ b/hw/intc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARM_GIC', if_true: files( 'arm_gicv3_dist.c', 'arm_gicv3_its_common.c', 'arm_gicv3_redist.c', + 'arm_gicv3_its.c', )) softmmu_ss.add(when: 'CONFIG_ETRAXFS', if_true: files('etraxfs_pic.c')) softmmu_ss.add(when: 'CONFIG_HEATHROW_PIC', if_true: files('heathrow_pic.c')) -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Defined descriptors for ITS device table,collection table and ITS command queue entities.Implemented register read/write functions, extract ITS table parameters and command queue parameters,extended gicv3 common to capture qemu address space(which host the ITS table platform memories required for subsequent ITS processing) and initialize the same in ITS device. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Message-id: 20210910143951.92242-3-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 29 ++ include/hw/intc/arm_gicv3_common.h | 3 + include/hw/intc/arm_gicv3_its_common.h | 23 ++ hw/intc/arm_gicv3_its.c | 376 +++++++++++++++++++++++++ 4 files changed, 431 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GITS_BASER, INNERCACHE, 59, 3) FIELD(GITS_BASER, INDIRECT, 62, 1) FIELD(GITS_BASER, VALID, 63, 1) +FIELD(GITS_CBASER, SIZE, 0, 8) +FIELD(GITS_CBASER, SHAREABILITY, 10, 2) +FIELD(GITS_CBASER, PHYADDR, 12, 40) +FIELD(GITS_CBASER, OUTERCACHE, 53, 3) +FIELD(GITS_CBASER, INNERCACHE, 59, 3) +FIELD(GITS_CBASER, VALID, 63, 1) + +FIELD(GITS_CREADR, STALLED, 0, 1) +FIELD(GITS_CREADR, OFFSET, 5, 15) + +FIELD(GITS_CWRITER, RETRY, 0, 1) +FIELD(GITS_CWRITER, OFFSET, 5, 15) + +FIELD(GITS_CTLR, ENABLED, 0, 1) FIELD(GITS_CTLR, QUIESCENT, 31, 1) FIELD(GITS_TYPER, PHYSICAL, 0, 1) @@ -XXX,XX +XXX,XX @@ FIELD(GITS_TYPER, PTA, 19, 1) FIELD(GITS_TYPER, CIDBITS, 32, 4) FIELD(GITS_TYPER, CIL, 36, 1) +#define GITS_IDREGS 0xFFD0 + +#define ITS_CTLR_ENABLED (1U) /* ITS Enabled */ + +#define GITS_BASER_RO_MASK (R_GITS_BASER_ENTRYSIZE_MASK | \ + R_GITS_BASER_TYPE_MASK) + #define GITS_BASER_PAGESIZE_4K 0 #define GITS_BASER_PAGESIZE_16K 1 #define GITS_BASER_PAGESIZE_64K 2 @@ -XXX,XX +XXX,XX @@ FIELD(GITS_TYPER, CIL, 36, 1) #define GITS_BASER_TYPE_DEVICE 1ULL #define GITS_BASER_TYPE_COLLECTION 4ULL +#define GITS_PAGE_SIZE_4K 0x1000 +#define GITS_PAGE_SIZE_16K 0x4000 +#define GITS_PAGE_SIZE_64K 0x10000 + +#define L1TABLE_ENTRY_SIZE 8 + +#define GITS_CMDQ_ENTRY_SIZE 32 + /** * Default features advertised by this version of ITS */ diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3State { int dev_fd; /* kvm device fd if backed by kvm vgic support */ Error *migration_blocker; + MemoryRegion *dma; + AddressSpace dma_as; + /* Distributor */ /* for a GIC with the security extensions the NS banked version of this diff --git a/include/hw/intc/arm_gicv3_its_common.h b/include/hw/intc/arm_gicv3_its_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_its_common.h +++ b/include/hw/intc/arm_gicv3_its_common.h @@ -XXX,XX +XXX,XX @@ #define GITS_TRANSLATER 0x0040 +typedef struct { + bool valid; + bool indirect; + uint16_t entry_sz; + uint32_t page_sz; + uint32_t max_entries; + union { + uint32_t max_devids; + uint32_t max_collids; + } maxids; + uint64_t base_addr; +} TableDesc; + +typedef struct { + bool valid; + uint32_t max_entries; + uint64_t base_addr; +} CmdQDesc; + struct GICv3ITSState { SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct GICv3ITSState { uint64_t creadr; uint64_t baser[8]; + TableDesc dt; + TableDesc ct; + CmdQDesc cq; + Error *migration_blocker; }; diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ struct GICv3ITSClass { void (*parent_reset)(DeviceState *dev); }; +static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz) +{ + uint64_t result = 0; + + switch (page_sz) { + case GITS_PAGE_SIZE_4K: + case GITS_PAGE_SIZE_16K: + result = FIELD_EX64(value, GITS_BASER, PHYADDR) << 12; + break; + + case GITS_PAGE_SIZE_64K: + result = FIELD_EX64(value, GITS_BASER, PHYADDRL_64K) << 16; + result |= FIELD_EX64(value, GITS_BASER, PHYADDRH_64K) << 48; + break; + + default: + break; + } + return result; +} + +/* + * This function extracts the ITS Device and Collection table specific + * parameters (like base_addr, size etc) from GITS_BASER register. + * It is called during ITS enable and also during post_load migration + */ +static void extract_table_params(GICv3ITSState *s) +{ + uint16_t num_pages = 0; + uint8_t page_sz_type; + uint8_t type; + uint32_t page_sz = 0; + uint64_t value; + + for (int i = 0; i < 8; i++) { + value = s->baser[i]; + + if (!value) { + continue; + } + + page_sz_type = FIELD_EX64(value, GITS_BASER, PAGESIZE); + + switch (page_sz_type) { + case 0: + page_sz = GITS_PAGE_SIZE_4K; + break; + + case 1: + page_sz = GITS_PAGE_SIZE_16K; + break; + + case 2: + case 3: + page_sz = GITS_PAGE_SIZE_64K; + break; + + default: + g_assert_not_reached(); + } + + num_pages = FIELD_EX64(value, GITS_BASER, SIZE) + 1; + + type = FIELD_EX64(value, GITS_BASER, TYPE); + + switch (type) { + + case GITS_BASER_TYPE_DEVICE: + memset(&s->dt, 0 , sizeof(s->dt)); + s->dt.valid = FIELD_EX64(value, GITS_BASER, VALID); + + if (!s->dt.valid) { + return; + } + + s->dt.page_sz = page_sz; + s->dt.indirect = FIELD_EX64(value, GITS_BASER, INDIRECT); + s->dt.entry_sz = FIELD_EX64(value, GITS_BASER, ENTRYSIZE); + + if (!s->dt.indirect) { + s->dt.max_entries = (num_pages * page_sz) / s->dt.entry_sz; + } else { + s->dt.max_entries = (((num_pages * page_sz) / + L1TABLE_ENTRY_SIZE) * + (page_sz / s->dt.entry_sz)); + } + + s->dt.maxids.max_devids = (1UL << (FIELD_EX64(s->typer, GITS_TYPER, + DEVBITS) + 1)); + + s->dt.base_addr = baser_base_addr(value, page_sz); + + break; + + case GITS_BASER_TYPE_COLLECTION: + memset(&s->ct, 0 , sizeof(s->ct)); + s->ct.valid = FIELD_EX64(value, GITS_BASER, VALID); + + /* + * GITS_TYPER.HCC is 0 for this implementation + * hence writes are discarded if ct.valid is 0 + */ + if (!s->ct.valid) { + return; + } + + s->ct.page_sz = page_sz; + s->ct.indirect = FIELD_EX64(value, GITS_BASER, INDIRECT); + s->ct.entry_sz = FIELD_EX64(value, GITS_BASER, ENTRYSIZE); + + if (!s->ct.indirect) { + s->ct.max_entries = (num_pages * page_sz) / s->ct.entry_sz; + } else { + s->ct.max_entries = (((num_pages * page_sz) / + L1TABLE_ENTRY_SIZE) * + (page_sz / s->ct.entry_sz)); + } + + if (FIELD_EX64(s->typer, GITS_TYPER, CIL)) { + s->ct.maxids.max_collids = (1UL << (FIELD_EX64(s->typer, + GITS_TYPER, CIDBITS) + 1)); + } else { + /* 16-bit CollectionId supported when CIL == 0 */ + s->ct.maxids.max_collids = (1UL << 16); + } + + s->ct.base_addr = baser_base_addr(value, page_sz); + + break; + + default: + break; + } + } +} + +static void extract_cmdq_params(GICv3ITSState *s) +{ + uint16_t num_pages = 0; + uint64_t value = s->cbaser; + + num_pages = FIELD_EX64(value, GITS_CBASER, SIZE) + 1; + + memset(&s->cq, 0 , sizeof(s->cq)); + s->cq.valid = FIELD_EX64(value, GITS_CBASER, VALID); + + if (s->cq.valid) { + s->cq.max_entries = (num_pages * GITS_PAGE_SIZE_4K) / + GITS_CMDQ_ENTRY_SIZE; + s->cq.base_addr = FIELD_EX64(value, GITS_CBASER, PHYADDR); + s->cq.base_addr <<= R_GITS_CBASER_PHYADDR_SHIFT; + } +} + static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset, uint64_t data, unsigned size, MemTxAttrs attrs) @@ -XXX,XX +XXX,XX @@ static bool its_writel(GICv3ITSState *s, hwaddr offset, uint64_t value, MemTxAttrs attrs) { bool result = true; + int index; + switch (offset) { + case GITS_CTLR: + s->ctlr |= (value & ~(s->ctlr)); + + if (s->ctlr & ITS_CTLR_ENABLED) { + extract_table_params(s); + extract_cmdq_params(s); + s->creadr = 0; + } + break; + case GITS_CBASER: + /* + * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is + * already enabled + */ + if (!(s->ctlr & ITS_CTLR_ENABLED)) { + s->cbaser = deposit64(s->cbaser, 0, 32, value); + s->creadr = 0; + s->cwriter = s->creadr; + } + break; + case GITS_CBASER + 4: + /* + * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is + * already enabled + */ + if (!(s->ctlr & ITS_CTLR_ENABLED)) { + s->cbaser = deposit64(s->cbaser, 32, 32, value); + s->creadr = 0; + s->cwriter = s->creadr; + } + break; + case GITS_CWRITER: + s->cwriter = deposit64(s->cwriter, 0, 32, + (value & ~R_GITS_CWRITER_RETRY_MASK)); + break; + case GITS_CWRITER + 4: + s->cwriter = deposit64(s->cwriter, 32, 32, value); + break; + case GITS_CREADR: + if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) { + s->creadr = deposit64(s->creadr, 0, 32, + (value & ~R_GITS_CREADR_STALLED_MASK)); + } else { + /* RO register, ignore the write */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid guest write to RO register at offset " + TARGET_FMT_plx "\n", __func__, offset); + } + break; + case GITS_CREADR + 4: + if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) { + s->creadr = deposit64(s->creadr, 32, 32, value); + } else { + /* RO register, ignore the write */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid guest write to RO register at offset " + TARGET_FMT_plx "\n", __func__, offset); + } + break; + case GITS_BASER ... GITS_BASER + 0x3f: + /* + * IMPDEF choice:- GITS_BASERn register becomes RO if ITS is + * already enabled + */ + if (!(s->ctlr & ITS_CTLR_ENABLED)) { + index = (offset - GITS_BASER) / 8; + + if (offset & 7) { + value <<= 32; + value &= ~GITS_BASER_RO_MASK; + s->baser[index] &= GITS_BASER_RO_MASK | MAKE_64BIT_MASK(0, 32); + s->baser[index] |= value; + } else { + value &= ~GITS_BASER_RO_MASK; + s->baser[index] &= GITS_BASER_RO_MASK | MAKE_64BIT_MASK(32, 32); + s->baser[index] |= value; + } + } + break; + case GITS_IIDR: + case GITS_IDREGS ... GITS_IDREGS + 0x2f: + /* RO registers, ignore the write */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid guest write to RO register at offset " + TARGET_FMT_plx "\n", __func__, offset); + break; + default: + result = false; + break; + } return result; } @@ -XXX,XX +XXX,XX @@ static bool its_readl(GICv3ITSState *s, hwaddr offset, uint64_t *data, MemTxAttrs attrs) { bool result = true; + int index; + switch (offset) { + case GITS_CTLR: + *data = s->ctlr; + break; + case GITS_IIDR: + *data = gicv3_iidr(); + break; + case GITS_IDREGS ... GITS_IDREGS + 0x2f: + /* ID registers */ + *data = gicv3_idreg(offset - GITS_IDREGS); + break; + case GITS_TYPER: + *data = extract64(s->typer, 0, 32); + break; + case GITS_TYPER + 4: + *data = extract64(s->typer, 32, 32); + break; + case GITS_CBASER: + *data = extract64(s->cbaser, 0, 32); + break; + case GITS_CBASER + 4: + *data = extract64(s->cbaser, 32, 32); + break; + case GITS_CREADR: + *data = extract64(s->creadr, 0, 32); + break; + case GITS_CREADR + 4: + *data = extract64(s->creadr, 32, 32); + break; + case GITS_CWRITER: + *data = extract64(s->cwriter, 0, 32); + break; + case GITS_CWRITER + 4: + *data = extract64(s->cwriter, 32, 32); + break; + case GITS_BASER ... GITS_BASER + 0x3f: + index = (offset - GITS_BASER) / 8; + if (offset & 7) { + *data = extract64(s->baser[index], 32, 32); + } else { + *data = extract64(s->baser[index], 0, 32); + } + break; + default: + result = false; + break; + } return result; } @@ -XXX,XX +XXX,XX @@ static bool its_writell(GICv3ITSState *s, hwaddr offset, uint64_t value, MemTxAttrs attrs) { bool result = true; + int index; + switch (offset) { + case GITS_BASER ... GITS_BASER + 0x3f: + /* + * IMPDEF choice:- GITS_BASERn register becomes RO if ITS is + * already enabled + */ + if (!(s->ctlr & ITS_CTLR_ENABLED)) { + index = (offset - GITS_BASER) / 8; + s->baser[index] &= GITS_BASER_RO_MASK; + s->baser[index] |= (value & ~GITS_BASER_RO_MASK); + } + break; + case GITS_CBASER: + /* + * IMPDEF choice:- GITS_CBASER register becomes RO if ITS is + * already enabled + */ + if (!(s->ctlr & ITS_CTLR_ENABLED)) { + s->cbaser = value; + s->creadr = 0; + s->cwriter = s->creadr; + } + break; + case GITS_CWRITER: + s->cwriter = value & ~R_GITS_CWRITER_RETRY_MASK; + break; + case GITS_CREADR: + if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) { + s->creadr = value & ~R_GITS_CREADR_STALLED_MASK; + } else { + /* RO register, ignore the write */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid guest write to RO register at offset " + TARGET_FMT_plx "\n", __func__, offset); + } + break; + case GITS_TYPER: + /* RO registers, ignore the write */ + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid guest write to RO register at offset " + TARGET_FMT_plx "\n", __func__, offset); + break; + default: + result = false; + break; + } return result; } @@ -XXX,XX +XXX,XX @@ static bool its_readll(GICv3ITSState *s, hwaddr offset, uint64_t *data, MemTxAttrs attrs) { bool result = true; + int index; + switch (offset) { + case GITS_TYPER: + *data = s->typer; + break; + case GITS_BASER ... GITS_BASER + 0x3f: + index = (offset - GITS_BASER) / 8; + *data = s->baser[index]; + break; + case GITS_CBASER: + *data = s->cbaser; + break; + case GITS_CREADR: + *data = s->creadr; + break; + case GITS_CWRITER: + *data = s->cwriter; + break; + default: + result = false; + break; + } return result; } @@ -XXX,XX +XXX,XX @@ static void gicv3_arm_its_realize(DeviceState *dev, Error **errp) gicv3_its_init_mmio(s, &gicv3_its_control_ops, &gicv3_its_translation_ops); + address_space_init(&s->gicv3->dma_as, s->gicv3->dma, + "gicv3-its-sysmem"); + /* set the ITS default features supported */ s->typer = FIELD_DP64(s->typer, GITS_TYPER, PHYSICAL, GITS_TYPE_PHYSICAL); @@ -XXX,XX +XXX,XX @@ static void gicv3_its_reset(DeviceState *dev) GITS_CTE_SIZE - 1); } +static void gicv3_its_post_load(GICv3ITSState *s) +{ + if (s->ctlr & ITS_CTLR_ENABLED) { + extract_table_params(s); + extract_cmdq_params(s); + } +} + static Property gicv3_its_props[] = { DEFINE_PROP_LINK("parent-gicv3", GICv3ITSState, gicv3, "arm-gicv3", GICv3State *), @@ -XXX,XX +XXX,XX @@ static void gicv3_its_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); GICv3ITSClass *ic = ARM_GICV3_ITS_CLASS(klass); + GICv3ITSCommonClass *icc = ARM_GICV3_ITS_COMMON_CLASS(klass); dc->realize = gicv3_arm_its_realize; device_class_set_props(dc, gicv3_its_props); device_class_set_parent_reset(dc, gicv3_its_reset, &ic->parent_reset); + icc->post_load = gicv3_its_post_load; } static const TypeInfo gicv3_its_info = { -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Added functionality to trigger ITS command queue processing on write to CWRITE register and process each command queue entry to identify the command type and handle commands like MAPD,MAPC,SYNC. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Message-id: 20210910143951.92242-4-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 40 +++++ hw/intc/arm_gicv3_its.c | 319 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 359 insertions(+) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GITS_TYPER, CIL, 36, 1) #define L1TABLE_ENTRY_SIZE 8 #define GITS_CMDQ_ENTRY_SIZE 32 +#define NUM_BYTES_IN_DW 8 + +#define CMD_MASK 0xff + +/* ITS Commands */ +#define GITS_CMD_CLEAR 0x04 +#define GITS_CMD_DISCARD 0x0F +#define GITS_CMD_INT 0x03 +#define GITS_CMD_MAPC 0x09 +#define GITS_CMD_MAPD 0x08 +#define GITS_CMD_MAPI 0x0B +#define GITS_CMD_MAPTI 0x0A +#define GITS_CMD_INV 0x0C +#define GITS_CMD_INVALL 0x0D +#define GITS_CMD_SYNC 0x05 + +/* MAPC command fields */ +#define ICID_LENGTH 16 +#define ICID_MASK ((1U << ICID_LENGTH) - 1) +FIELD(MAPC, RDBASE, 16, 32) + +#define RDBASE_PROCNUM_LENGTH 16 +#define RDBASE_PROCNUM_MASK ((1ULL << RDBASE_PROCNUM_LENGTH) - 1) + +/* MAPD command fields */ +#define ITTADDR_LENGTH 44 +#define ITTADDR_SHIFT 8 +#define ITTADDR_MASK MAKE_64BIT_MASK(ITTADDR_SHIFT, ITTADDR_LENGTH) +#define SIZE_MASK 0x1f + +#define DEVID_SHIFT 32 +#define DEVID_MASK MAKE_64BIT_MASK(32, 32) + +#define VALID_SHIFT 63 +#define CMD_FIELD_VALID_MASK (1ULL << VALID_SHIFT) +#define L2_TABLE_VALID_MASK CMD_FIELD_VALID_MASK +#define TABLE_ENTRY_VALID_MASK (1ULL << 0) /** * Default features advertised by this version of ITS @@ -XXX,XX +XXX,XX @@ FIELD(GITS_TYPER, CIL, 36, 1) * Valid = 1 bit,ITTAddr = 44 bits,Size = 5 bits */ #define GITS_DTE_SIZE (0x8ULL) +#define GITS_DTE_ITTADDR_SHIFT 6 +#define GITS_DTE_ITTADDR_MASK MAKE_64BIT_MASK(GITS_DTE_ITTADDR_SHIFT, \ + ITTADDR_LENGTH) /* * 8 bytes Collection Table Entry size diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz) return result; } +static bool update_cte(GICv3ITSState *s, uint16_t icid, bool valid, + uint64_t rdbase) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint64_t value; + uint64_t l2t_addr; + bool valid_l2t; + uint32_t l2t_id; + uint32_t max_l2_entries; + uint64_t cte = 0; + MemTxResult res = MEMTX_OK; + + if (!s->ct.valid) { + return true; + } + + if (valid) { + /* add mapping entry to collection table */ + cte = (valid & TABLE_ENTRY_VALID_MASK) | (rdbase << 1ULL); + } + + /* + * The specification defines the format of level 1 entries of a + * 2-level table, but the format of level 2 entries and the format + * of flat-mapped tables is IMPDEF. + */ + if (s->ct.indirect) { + l2t_id = icid / (s->ct.page_sz / L1TABLE_ENTRY_SIZE); + + value = address_space_ldq_le(as, + s->ct.base_addr + + (l2t_id * L1TABLE_ENTRY_SIZE), + MEMTXATTRS_UNSPECIFIED, &res); + + if (res != MEMTX_OK) { + return false; + } + + valid_l2t = (value & L2_TABLE_VALID_MASK) != 0; + + if (valid_l2t) { + max_l2_entries = s->ct.page_sz / s->ct.entry_sz; + + l2t_addr = value & ((1ULL << 51) - 1); + + address_space_stq_le(as, l2t_addr + + ((icid % max_l2_entries) * GITS_CTE_SIZE), + cte, MEMTXATTRS_UNSPECIFIED, &res); + } + } else { + /* Flat level table */ + address_space_stq_le(as, s->ct.base_addr + (icid * GITS_CTE_SIZE), + cte, MEMTXATTRS_UNSPECIFIED, &res); + } + if (res != MEMTX_OK) { + return false; + } else { + return true; + } +} + +static bool process_mapc(GICv3ITSState *s, uint32_t offset) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint16_t icid; + uint64_t rdbase; + bool valid; + MemTxResult res = MEMTX_OK; + bool result = false; + uint64_t value; + + offset += NUM_BYTES_IN_DW; + offset += NUM_BYTES_IN_DW; + + value = address_space_ldq_le(as, s->cq.base_addr + offset, + MEMTXATTRS_UNSPECIFIED, &res); + + if (res != MEMTX_OK) { + return result; + } + + icid = value & ICID_MASK; + + rdbase = (value & R_MAPC_RDBASE_MASK) >> R_MAPC_RDBASE_SHIFT; + rdbase &= RDBASE_PROCNUM_MASK; + + valid = (value & CMD_FIELD_VALID_MASK); + + if ((icid > s->ct.maxids.max_collids) || (rdbase > s->gicv3->num_cpu)) { + qemu_log_mask(LOG_GUEST_ERROR, + "ITS MAPC: invalid collection table attributes " + "icid %d rdbase %lu\n", icid, rdbase); + /* + * in this implementation, in case of error + * we ignore this command and move onto the next + * command in the queue + */ + } else { + result = update_cte(s, icid, valid, rdbase); + } + + return result; +} + +static bool update_dte(GICv3ITSState *s, uint32_t devid, bool valid, + uint8_t size, uint64_t itt_addr) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint64_t value; + uint64_t l2t_addr; + bool valid_l2t; + uint32_t l2t_id; + uint32_t max_l2_entries; + uint64_t dte = 0; + MemTxResult res = MEMTX_OK; + + if (s->dt.valid) { + if (valid) { + /* add mapping entry to device table */ + dte = (valid & TABLE_ENTRY_VALID_MASK) | + ((size & SIZE_MASK) << 1U) | + (itt_addr << GITS_DTE_ITTADDR_SHIFT); + } + } else { + return true; + } + + /* + * The specification defines the format of level 1 entries of a + * 2-level table, but the format of level 2 entries and the format + * of flat-mapped tables is IMPDEF. + */ + if (s->dt.indirect) { + l2t_id = devid / (s->dt.page_sz / L1TABLE_ENTRY_SIZE); + + value = address_space_ldq_le(as, + s->dt.base_addr + + (l2t_id * L1TABLE_ENTRY_SIZE), + MEMTXATTRS_UNSPECIFIED, &res); + + if (res != MEMTX_OK) { + return false; + } + + valid_l2t = (value & L2_TABLE_VALID_MASK) != 0; + + if (valid_l2t) { + max_l2_entries = s->dt.page_sz / s->dt.entry_sz; + + l2t_addr = value & ((1ULL << 51) - 1); + + address_space_stq_le(as, l2t_addr + + ((devid % max_l2_entries) * GITS_DTE_SIZE), + dte, MEMTXATTRS_UNSPECIFIED, &res); + } + } else { + /* Flat level table */ + address_space_stq_le(as, s->dt.base_addr + (devid * GITS_DTE_SIZE), + dte, MEMTXATTRS_UNSPECIFIED, &res); + } + if (res != MEMTX_OK) { + return false; + } else { + return true; + } +} + +static bool process_mapd(GICv3ITSState *s, uint64_t value, uint32_t offset) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint32_t devid; + uint8_t size; + uint64_t itt_addr; + bool valid; + MemTxResult res = MEMTX_OK; + bool result = false; + + devid = ((value & DEVID_MASK) >> DEVID_SHIFT); + + offset += NUM_BYTES_IN_DW; + value = address_space_ldq_le(as, s->cq.base_addr + offset, + MEMTXATTRS_UNSPECIFIED, &res); + + if (res != MEMTX_OK) { + return result; + } + + size = (value & SIZE_MASK); + + offset += NUM_BYTES_IN_DW; + value = address_space_ldq_le(as, s->cq.base_addr + offset, + MEMTXATTRS_UNSPECIFIED, &res); + + if (res != MEMTX_OK) { + return result; + } + + itt_addr = (value & ITTADDR_MASK) >> ITTADDR_SHIFT; + + valid = (value & CMD_FIELD_VALID_MASK); + + if ((devid > s->dt.maxids.max_devids) || + (size > FIELD_EX64(s->typer, GITS_TYPER, IDBITS))) { + qemu_log_mask(LOG_GUEST_ERROR, + "ITS MAPD: invalid device table attributes " + "devid %d or size %d\n", devid, size); + /* + * in this implementation, in case of error + * we ignore this command and move onto the next + * command in the queue + */ + } else { + result = update_dte(s, devid, valid, size, itt_addr); + } + + return result; +} + +/* + * Current implementation blocks until all + * commands are processed + */ +static void process_cmdq(GICv3ITSState *s) +{ + uint32_t wr_offset = 0; + uint32_t rd_offset = 0; + uint32_t cq_offset = 0; + uint64_t data; + AddressSpace *as = &s->gicv3->dma_as; + MemTxResult res = MEMTX_OK; + bool result = true; + uint8_t cmd; + + if (!(s->ctlr & ITS_CTLR_ENABLED)) { + return; + } + + wr_offset = FIELD_EX64(s->cwriter, GITS_CWRITER, OFFSET); + + if (wr_offset > s->cq.max_entries) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid write offset " + "%d\n", __func__, wr_offset); + return; + } + + rd_offset = FIELD_EX64(s->creadr, GITS_CREADR, OFFSET); + + if (rd_offset > s->cq.max_entries) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid read offset " + "%d\n", __func__, rd_offset); + return; + } + + while (wr_offset != rd_offset) { + cq_offset = (rd_offset * GITS_CMDQ_ENTRY_SIZE); + data = address_space_ldq_le(as, s->cq.base_addr + cq_offset, + MEMTXATTRS_UNSPECIFIED, &res); + if (res != MEMTX_OK) { + result = false; + } + cmd = (data & CMD_MASK); + + switch (cmd) { + case GITS_CMD_INT: + break; + case GITS_CMD_CLEAR: + break; + case GITS_CMD_SYNC: + /* + * Current implementation makes a blocking synchronous call + * for every command issued earlier, hence the internal state + * is already consistent by the time SYNC command is executed. + * Hence no further processing is required for SYNC command. + */ + break; + case GITS_CMD_MAPD: + result = process_mapd(s, data, cq_offset); + break; + case GITS_CMD_MAPC: + result = process_mapc(s, cq_offset); + break; + case GITS_CMD_MAPTI: + break; + case GITS_CMD_MAPI: + break; + case GITS_CMD_DISCARD: + break; + case GITS_CMD_INV: + case GITS_CMD_INVALL: + break; + default: + break; + } + if (result) { + rd_offset++; + rd_offset %= s->cq.max_entries; + s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, OFFSET, rd_offset); + } else { + /* + * in this implementation, in case of dma read/write error + * we stall the command processing + */ + s->creadr = FIELD_DP64(s->creadr, GITS_CREADR, STALLED, 1); + qemu_log_mask(LOG_GUEST_ERROR, + "%s: %x cmd processing failed\n", __func__, cmd); + break; + } + } +} + /* * This function extracts the ITS Device and Collection table specific * parameters (like base_addr, size etc) from GITS_BASER register. @@ -XXX,XX +XXX,XX @@ static bool its_writel(GICv3ITSState *s, hwaddr offset, extract_table_params(s); extract_cmdq_params(s); s->creadr = 0; + process_cmdq(s); } break; case GITS_CBASER: @@ -XXX,XX +XXX,XX @@ static bool its_writel(GICv3ITSState *s, hwaddr offset, case GITS_CWRITER: s->cwriter = deposit64(s->cwriter, 0, 32, (value & ~R_GITS_CWRITER_RETRY_MASK)); + if (s->cwriter != s->creadr) { + process_cmdq(s); + } break; case GITS_CWRITER + 4: s->cwriter = deposit64(s->cwriter, 32, 32, value); @@ -XXX,XX +XXX,XX @@ static bool its_writell(GICv3ITSState *s, hwaddr offset, break; case GITS_CWRITER: s->cwriter = value & ~R_GITS_CWRITER_RETRY_MASK; + if (s->cwriter != s->creadr) { + process_cmdq(s); + } break; case GITS_CREADR: if (s->gicv3->gicd_ctlr & GICD_CTLR_DS) { -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Added ITS command queue handling for MAPTI,MAPI commands,handled ITS translation which triggers an LPI via INT command as well as write to GITS_TRANSLATER register,defined enum to differentiate between ITS command interrupt trigger and GITS_TRANSLATER based interrupt trigger. Each of these commands make use of other functionalities implemented to get device table entry,collection table entry or interrupt translation table entry required for their processing. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210910143951.92242-5-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 12 + include/hw/intc/arm_gicv3_common.h | 2 + hw/intc/arm_gicv3_its.c | 365 ++++++++++++++++++++++++++++- 3 files changed, 378 insertions(+), 1 deletion(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(MAPC, RDBASE, 16, 32) #define ITTADDR_MASK MAKE_64BIT_MASK(ITTADDR_SHIFT, ITTADDR_LENGTH) #define SIZE_MASK 0x1f +/* MAPI command fields */ +#define EVENTID_MASK ((1ULL << 32) - 1) + +/* MAPTI command fields */ +#define pINTID_SHIFT 32 +#define pINTID_MASK MAKE_64BIT_MASK(32, 32) + #define DEVID_SHIFT 32 #define DEVID_MASK MAKE_64BIT_MASK(32, 32) @@ -XXX,XX +XXX,XX @@ FIELD(MAPC, RDBASE, 16, 32) * Values: | vPEID | ICID | */ #define ITS_ITT_ENTRY_SIZE 0xC +#define ITE_ENTRY_INTTYPE_SHIFT 1 +#define ITE_ENTRY_INTID_SHIFT 2 +#define ITE_ENTRY_INTID_MASK MAKE_64BIT_MASK(2, 24) +#define ITE_ENTRY_INTSP_SHIFT 26 +#define ITE_ENTRY_ICID_MASK MAKE_64BIT_MASK(0, 16) /* 16 bits EventId */ #define ITS_IDBITS GICD_TYPER_IDBITS diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ #define GICV3_MAXIRQ 1020 #define GICV3_MAXSPI (GICV3_MAXIRQ - GIC_INTERNAL) +#define GICV3_LPI_INTID_START 8192 + #define GICV3_REDIST_SIZE 0x20000 /* Number of SGI target-list bits */ diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ struct GICv3ITSClass { void (*parent_reset)(DeviceState *dev); }; +/* + * This is an internal enum used to distinguish between LPI triggered + * via command queue and LPI triggered via gits_translater write. + */ +typedef enum ItsCmdType { + NONE = 0, /* internal indication for GITS_TRANSLATER write */ + CLEAR = 1, + DISCARD = 2, + INT = 3, +} ItsCmdType; + +typedef struct { + uint32_t iteh; + uint64_t itel; +} IteEntry; + static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz) { uint64_t result = 0; @@ -XXX,XX +XXX,XX @@ static uint64_t baser_base_addr(uint64_t value, uint32_t page_sz) return result; } +static bool get_cte(GICv3ITSState *s, uint16_t icid, uint64_t *cte, + MemTxResult *res) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint64_t l2t_addr; + uint64_t value; + bool valid_l2t; + uint32_t l2t_id; + uint32_t max_l2_entries; + + if (s->ct.indirect) { + l2t_id = icid / (s->ct.page_sz / L1TABLE_ENTRY_SIZE); + + value = address_space_ldq_le(as, + s->ct.base_addr + + (l2t_id * L1TABLE_ENTRY_SIZE), + MEMTXATTRS_UNSPECIFIED, res); + + if (*res == MEMTX_OK) { + valid_l2t = (value & L2_TABLE_VALID_MASK) != 0; + + if (valid_l2t) { + max_l2_entries = s->ct.page_sz / s->ct.entry_sz; + + l2t_addr = value & ((1ULL << 51) - 1); + + *cte = address_space_ldq_le(as, l2t_addr + + ((icid % max_l2_entries) * GITS_CTE_SIZE), + MEMTXATTRS_UNSPECIFIED, res); + } + } + } else { + /* Flat level table */ + *cte = address_space_ldq_le(as, s->ct.base_addr + + (icid * GITS_CTE_SIZE), + MEMTXATTRS_UNSPECIFIED, res); + } + + return (*cte & TABLE_ENTRY_VALID_MASK) != 0; +} + +static bool update_ite(GICv3ITSState *s, uint32_t eventid, uint64_t dte, + IteEntry ite) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint64_t itt_addr; + MemTxResult res = MEMTX_OK; + + itt_addr = (dte & GITS_DTE_ITTADDR_MASK) >> GITS_DTE_ITTADDR_SHIFT; + itt_addr <<= ITTADDR_SHIFT; /* 256 byte aligned */ + + address_space_stq_le(as, itt_addr + (eventid * (sizeof(uint64_t) + + sizeof(uint32_t))), ite.itel, MEMTXATTRS_UNSPECIFIED, + &res); + + if (res == MEMTX_OK) { + address_space_stl_le(as, itt_addr + (eventid * (sizeof(uint64_t) + + sizeof(uint32_t))) + sizeof(uint32_t), ite.iteh, + MEMTXATTRS_UNSPECIFIED, &res); + } + if (res != MEMTX_OK) { + return false; + } else { + return true; + } +} + +static bool get_ite(GICv3ITSState *s, uint32_t eventid, uint64_t dte, + uint16_t *icid, uint32_t *pIntid, MemTxResult *res) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint64_t itt_addr; + bool status = false; + IteEntry ite = {}; + + itt_addr = (dte & GITS_DTE_ITTADDR_MASK) >> GITS_DTE_ITTADDR_SHIFT; + itt_addr <<= ITTADDR_SHIFT; /* 256 byte aligned */ + + ite.itel = address_space_ldq_le(as, itt_addr + + (eventid * (sizeof(uint64_t) + + sizeof(uint32_t))), MEMTXATTRS_UNSPECIFIED, + res); + + if (*res == MEMTX_OK) { + ite.iteh = address_space_ldl_le(as, itt_addr + + (eventid * (sizeof(uint64_t) + + sizeof(uint32_t))) + sizeof(uint32_t), + MEMTXATTRS_UNSPECIFIED, res); + + if (*res == MEMTX_OK) { + if (ite.itel & TABLE_ENTRY_VALID_MASK) { + if ((ite.itel >> ITE_ENTRY_INTTYPE_SHIFT) & + GITS_TYPE_PHYSICAL) { + *pIntid = (ite.itel & ITE_ENTRY_INTID_MASK) >> + ITE_ENTRY_INTID_SHIFT; + *icid = ite.iteh & ITE_ENTRY_ICID_MASK; + status = true; + } + } + } + } + return status; +} + +static uint64_t get_dte(GICv3ITSState *s, uint32_t devid, MemTxResult *res) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint64_t l2t_addr; + uint64_t value; + bool valid_l2t; + uint32_t l2t_id; + uint32_t max_l2_entries; + + if (s->dt.indirect) { + l2t_id = devid / (s->dt.page_sz / L1TABLE_ENTRY_SIZE); + + value = address_space_ldq_le(as, + s->dt.base_addr + + (l2t_id * L1TABLE_ENTRY_SIZE), + MEMTXATTRS_UNSPECIFIED, res); + + if (*res == MEMTX_OK) { + valid_l2t = (value & L2_TABLE_VALID_MASK) != 0; + + if (valid_l2t) { + max_l2_entries = s->dt.page_sz / s->dt.entry_sz; + + l2t_addr = value & ((1ULL << 51) - 1); + + value = address_space_ldq_le(as, l2t_addr + + ((devid % max_l2_entries) * GITS_DTE_SIZE), + MEMTXATTRS_UNSPECIFIED, res); + } + } + } else { + /* Flat level table */ + value = address_space_ldq_le(as, s->dt.base_addr + + (devid * GITS_DTE_SIZE), + MEMTXATTRS_UNSPECIFIED, res); + } + + return value; +} + +/* + * This function handles the processing of following commands based on + * the ItsCmdType parameter passed:- + * 1. triggering of lpi interrupt translation via ITS INT command + * 2. triggering of lpi interrupt translation via gits_translater register + * 3. handling of ITS CLEAR command + * 4. handling of ITS DISCARD command + */ +static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, + ItsCmdType cmd) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint32_t devid, eventid; + MemTxResult res = MEMTX_OK; + bool dte_valid; + uint64_t dte = 0; + uint32_t max_eventid; + uint16_t icid = 0; + uint32_t pIntid = 0; + bool ite_valid = false; + uint64_t cte = 0; + bool cte_valid = false; + bool result = false; + + if (cmd == NONE) { + devid = offset; + } else { + devid = ((value & DEVID_MASK) >> DEVID_SHIFT); + + offset += NUM_BYTES_IN_DW; + value = address_space_ldq_le(as, s->cq.base_addr + offset, + MEMTXATTRS_UNSPECIFIED, &res); + } + + if (res != MEMTX_OK) { + return result; + } + + eventid = (value & EVENTID_MASK); + + dte = get_dte(s, devid, &res); + + if (res != MEMTX_OK) { + return result; + } + dte_valid = dte & TABLE_ENTRY_VALID_MASK; + + if (dte_valid) { + max_eventid = (1UL << (((dte >> 1U) & SIZE_MASK) + 1)); + + ite_valid = get_ite(s, eventid, dte, &icid, &pIntid, &res); + + if (res != MEMTX_OK) { + return result; + } + + if (ite_valid) { + cte_valid = get_cte(s, icid, &cte, &res); + } + + if (res != MEMTX_OK) { + return result; + } + } + + if ((devid > s->dt.maxids.max_devids) || !dte_valid || !ite_valid || + !cte_valid || (eventid > max_eventid)) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes " + "devid %d or eventid %d or invalid dte %d or" + "invalid cte %d or invalid ite %d\n", + __func__, devid, eventid, dte_valid, cte_valid, + ite_valid); + /* + * in this implementation, in case of error + * we ignore this command and move onto the next + * command in the queue + */ + } else { + /* + * Current implementation only supports rdbase == procnum + * Hence rdbase physical address is ignored + */ + if (cmd == DISCARD) { + IteEntry ite = {}; + /* remove mapping from interrupt translation table */ + result = update_ite(s, eventid, dte, ite); + } + } + + return result; +} + +static bool process_mapti(GICv3ITSState *s, uint64_t value, uint32_t offset, + bool ignore_pInt) +{ + AddressSpace *as = &s->gicv3->dma_as; + uint32_t devid, eventid; + uint32_t pIntid = 0; + uint32_t max_eventid, max_Intid; + bool dte_valid; + MemTxResult res = MEMTX_OK; + uint16_t icid = 0; + uint64_t dte = 0; + IteEntry ite; + uint32_t int_spurious = INTID_SPURIOUS; + bool result = false; + + devid = ((value & DEVID_MASK) >> DEVID_SHIFT); + offset += NUM_BYTES_IN_DW; + value = address_space_ldq_le(as, s->cq.base_addr + offset, + MEMTXATTRS_UNSPECIFIED, &res); + + if (res != MEMTX_OK) { + return result; + } + + eventid = (value & EVENTID_MASK); + + if (!ignore_pInt) { + pIntid = ((value & pINTID_MASK) >> pINTID_SHIFT); + } + + offset += NUM_BYTES_IN_DW; + value = address_space_ldq_le(as, s->cq.base_addr + offset, + MEMTXATTRS_UNSPECIFIED, &res); + + if (res != MEMTX_OK) { + return result; + } + + icid = value & ICID_MASK; + + dte = get_dte(s, devid, &res); + + if (res != MEMTX_OK) { + return result; + } + dte_valid = dte & TABLE_ENTRY_VALID_MASK; + + max_eventid = (1UL << (((dte >> 1U) & SIZE_MASK) + 1)); + + if (!ignore_pInt) { + max_Intid = (1ULL << (GICD_TYPER_IDBITS + 1)) - 1; + } + + if ((devid > s->dt.maxids.max_devids) || (icid > s->ct.maxids.max_collids) + || !dte_valid || (eventid > max_eventid) || + (!ignore_pInt && (((pIntid < GICV3_LPI_INTID_START) || + (pIntid > max_Intid)) && (pIntid != INTID_SPURIOUS)))) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid command attributes " + "devid %d or icid %d or eventid %d or pIntid %d or" + "unmapped dte %d\n", __func__, devid, icid, eventid, + pIntid, dte_valid); + /* + * in this implementation, in case of error + * we ignore this command and move onto the next + * command in the queue + */ + } else { + /* add ite entry to interrupt translation table */ + ite.itel = (dte_valid & TABLE_ENTRY_VALID_MASK) | + (GITS_TYPE_PHYSICAL << ITE_ENTRY_INTTYPE_SHIFT); + + if (ignore_pInt) { + ite.itel |= (eventid << ITE_ENTRY_INTID_SHIFT); + } else { + ite.itel |= (pIntid << ITE_ENTRY_INTID_SHIFT); + } + ite.itel |= (int_spurious << ITE_ENTRY_INTSP_SHIFT); + ite.iteh = icid; + + result = update_ite(s, eventid, dte, ite); + } + + return result; +} + static bool update_cte(GICv3ITSState *s, uint16_t icid, bool valid, uint64_t rdbase) { @@ -XXX,XX +XXX,XX @@ static void process_cmdq(GICv3ITSState *s) switch (cmd) { case GITS_CMD_INT: + res = process_its_cmd(s, data, cq_offset, INT); break; case GITS_CMD_CLEAR: + res = process_its_cmd(s, data, cq_offset, CLEAR); break; case GITS_CMD_SYNC: /* @@ -XXX,XX +XXX,XX @@ static void process_cmdq(GICv3ITSState *s) result = process_mapc(s, cq_offset); break; case GITS_CMD_MAPTI: + result = process_mapti(s, data, cq_offset, false); break; case GITS_CMD_MAPI: + result = process_mapti(s, data, cq_offset, true); break; case GITS_CMD_DISCARD: + result = process_its_cmd(s, data, cq_offset, DISCARD); break; case GITS_CMD_INV: case GITS_CMD_INVALL: @@ -XXX,XX +XXX,XX @@ static MemTxResult gicv3_its_translation_write(void *opaque, hwaddr offset, uint64_t data, unsigned size, MemTxAttrs attrs) { - return MEMTX_OK; + GICv3ITSState *s = (GICv3ITSState *)opaque; + bool result = true; + uint32_t devid = 0; + + switch (offset) { + case GITS_TRANSLATER: + if (s->ctlr & ITS_CTLR_ENABLED) { + devid = attrs.requester_id; + result = process_its_cmd(s, data, devid, NONE); + } + break; + default: + break; + } + + if (result) { + return MEMTX_OK; + } else { + return MEMTX_ERROR; + } } static bool its_writel(GICv3ITSState *s, hwaddr offset, -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Added properties to enable ITS feature and define qemu system address space memory in gicv3 common,setup distributor and redistributor registers to indicate LPI support. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Message-id: 20210910143951.92242-6-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 2 ++ include/hw/intc/arm_gicv3_common.h | 1 + hw/intc/arm_gicv3_common.c | 12 ++++++++++++ hw/intc/arm_gicv3_dist.c | 5 ++++- hw/intc/arm_gicv3_redist.c | 12 +++++++++--- 5 files changed, 28 insertions(+), 4 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ #define GICD_CTLR_E1NWF (1U << 7) #define GICD_CTLR_RWP (1U << 31) +#define GICD_TYPER_LPIS_SHIFT 17 + /* 16 bits EventId */ #define GICD_TYPER_IDBITS 0xf diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3State { uint32_t num_cpu; uint32_t num_irq; uint32_t revision; + bool lpi_enable; bool security_extn; bool irq_reset_nonsecure; bool gicd_no_migration_shift_bug; diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp) return; } + if (s->lpi_enable && !s->dma) { + error_setg(errp, "Redist-ITS: Guest 'sysmem' reference link not set"); + return; + } + s->cpu = g_new0(GICv3CPUState, s->num_cpu); for (i = 0; i < s->num_cpu; i++) { @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_realize(DeviceState *dev, Error **errp) (1 << 24) | (i << 8) | (last << 4); + + if (s->lpi_enable) { + s->cpu[i].gicr_typer |= GICR_TYPER_PLPIS; + } } } @@ -XXX,XX +XXX,XX @@ static Property arm_gicv3_common_properties[] = { DEFINE_PROP_UINT32("num-cpu", GICv3State, num_cpu, 1), DEFINE_PROP_UINT32("num-irq", GICv3State, num_irq, 32), DEFINE_PROP_UINT32("revision", GICv3State, revision, 3), + DEFINE_PROP_BOOL("has-lpi", GICv3State, lpi_enable, 0), DEFINE_PROP_BOOL("has-security-extensions", GICv3State, security_extn, 0), DEFINE_PROP_ARRAY("redist-region-count", GICv3State, nb_redist_regions, redist_region_count, qdev_prop_uint32, uint32_t), + DEFINE_PROP_LINK("sysmem", GICv3State, dma, TYPE_MEMORY_REGION, + MemoryRegion *), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/intc/arm_gicv3_dist.c b/hw/intc/arm_gicv3_dist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_dist.c +++ b/hw/intc/arm_gicv3_dist.c @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, * A3V == 1 (non-zero values of Affinity level 3 supported) * IDbits == 0xf (we support 16-bit interrupt identifiers) * DVIS == 0 (Direct virtual LPI injection not supported) - * LPIS == 0 (LPIs not supported) + * LPIS == 1 (LPIs are supported if affinity routing is enabled) + * num_LPIs == 0b00000 (bits [15:11],Number of LPIs as indicated + * by GICD_TYPER.IDbits) * MBIS == 0 (message-based SPIs not supported) * SecurityExtn == 1 if security extns supported * CPUNumber == 0 since for us ARE is always 1 @@ -XXX,XX +XXX,XX @@ static bool gicd_readl(GICv3State *s, hwaddr offset, bool sec_extn = !(s->gicd_ctlr & GICD_CTLR_DS); *data = (1 << 25) | (1 << 24) | (sec_extn << 10) | + (s->lpi_enable << GICD_TYPER_LPIS_SHIFT) | (0xf << 19) | itlinesnumber; return true; } diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset, case GICR_CTLR: /* For our implementation, GICR_TYPER.DPGS is 0 and so all * the DPG bits are RAZ/WI. We don't do anything asynchronously, - * so UWP and RWP are RAZ/WI. And GICR_TYPER.LPIS is 0 (we don't - * implement LPIs) so Enable_LPIs is RES0. So there are no writable - * bits for us. + * so UWP and RWP are RAZ/WI. GICR_TYPER.LPIS is 1 (we + * implement LPIs) so Enable_LPIs is programmable. */ + if (cs->gicr_typer & GICR_TYPER_PLPIS) { + if (value & GICR_CTLR_ENABLE_LPIS) { + cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS; + } else { + cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS; + } + } return MEMTX_OK; case GICR_STATUSR: /* RAZ/WI for our implementation */ -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Implemented lpi processing at redistributor to get lpi config info from lpi configuration table,determine priority,set pending state in lpi pending table and forward the lpi to cpuif.Added logic to invoke redistributor lpi processing with translated LPI which set/clear LPI from ITS device as part of ITS INT,CLEAR,DISCARD command and GITS_TRANSLATER processing. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210910143951.92242-7-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/gicv3_internal.h | 9 ++ include/hw/intc/arm_gicv3_common.h | 7 ++ hw/intc/arm_gicv3.c | 14 +++ hw/intc/arm_gicv3_common.c | 1 + hw/intc/arm_gicv3_cpuif.c | 7 +- hw/intc/arm_gicv3_its.c | 23 +++++ hw/intc/arm_gicv3_redist.c | 141 +++++++++++++++++++++++++++++ 7 files changed, 200 insertions(+), 2 deletions(-) diff --git a/hw/intc/gicv3_internal.h b/hw/intc/gicv3_internal.h index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/gicv3_internal.h +++ b/hw/intc/gicv3_internal.h @@ -XXX,XX +XXX,XX @@ FIELD(GICR_PENDBASER, PHYADDR, 16, 36) FIELD(GICR_PENDBASER, OUTERCACHE, 56, 3) FIELD(GICR_PENDBASER, PTZ, 62, 1) +#define GICR_PROPBASER_IDBITS_THRESHOLD 0xd + #define ICC_CTLR_EL1_CBPR (1U << 0) #define ICC_CTLR_EL1_EOIMODE (1U << 1) #define ICC_CTLR_EL1_PMHE (1U << 6) @@ -XXX,XX +XXX,XX @@ FIELD(GITS_TYPER, CIL, 36, 1) #define L1TABLE_ENTRY_SIZE 8 +#define LPI_CTE_ENABLED TABLE_ENTRY_VALID_MASK +#define LPI_PRIORITY_MASK 0xfc + #define GITS_CMDQ_ENTRY_SIZE 32 #define NUM_BYTES_IN_DW 8 @@ -XXX,XX +XXX,XX @@ FIELD(MAPC, RDBASE, 16, 32) * Valid = 1 bit,RDBase = 36 bits(considering max RDBASE) */ #define GITS_CTE_SIZE (0x8ULL) +#define GITS_CTE_RDBASE_PROCNUM_MASK MAKE_64BIT_MASK(1, RDBASE_PROCNUM_LENGTH) /* Special interrupt IDs */ #define INTID_SECURE 1020 @@ -XXX,XX +XXX,XX @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data, unsigned size, MemTxAttrs attrs); void gicv3_dist_set_irq(GICv3State *s, int irq, int level); void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level); +void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level); +void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level); +void gicv3_redist_update_lpi(GICv3CPUState *cs); void gicv3_redist_send_sgi(GICv3CPUState *cs, int grp, int irq, bool ns); void gicv3_init_cpuif(GICv3State *s); diff --git a/include/hw/intc/arm_gicv3_common.h b/include/hw/intc/arm_gicv3_common.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/intc/arm_gicv3_common.h +++ b/include/hw/intc/arm_gicv3_common.h @@ -XXX,XX +XXX,XX @@ struct GICv3CPUState { * real state above; it doesn't need to be migrated. */ PendingIrq hppi; + + /* + * Cached information recalculated from LPI tables + * in guest memory + */ + PendingIrq hpplpi; + /* This is temporary working state, to avoid a malloc in gicv3_update() */ bool seenbetter; }; diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3.c +++ b/hw/intc/arm_gicv3.c @@ -XXX,XX +XXX,XX @@ static void gicv3_redist_update_noirqset(GICv3CPUState *cs) cs->hppi.grp = gicv3_irq_group(cs->gic, cs, cs->hppi.irq); } + if ((cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) && cs->gic->lpi_enable && + (cs->hpplpi.prio != 0xff)) { + if (irqbetter(cs, cs->hpplpi.irq, cs->hpplpi.prio)) { + cs->hppi.irq = cs->hpplpi.irq; + cs->hppi.prio = cs->hpplpi.prio; + cs->hppi.grp = cs->hpplpi.grp; + seenbetter = true; + } + } + /* If the best interrupt we just found would preempt whatever * was the previous best interrupt before this update, then * we know it's definitely the best one now. @@ -XXX,XX +XXX,XX @@ static void gicv3_set_irq(void *opaque, int irq, int level) static void arm_gicv3_post_load(GICv3State *s) { + int i; /* Recalculate our cached idea of the current highest priority * pending interrupt, but don't set IRQ or FIQ lines. */ + for (i = 0; i < s->num_cpu; i++) { + gicv3_redist_update_lpi(&s->cpu[i]); + } gicv3_full_update_noirqset(s); /* Repopulate the cache of GICv3CPUState pointers for target CPUs */ gicv3_cache_all_target_cpustates(s); diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_common.c +++ b/hw/intc/arm_gicv3_common.c @@ -XXX,XX +XXX,XX @@ static void arm_gicv3_common_reset(DeviceState *dev) memset(cs->gicr_ipriorityr, 0, sizeof(cs->gicr_ipriorityr)); cs->hppi.prio = 0xff; + cs->hpplpi.prio = 0xff; /* State in the CPU interface must *not* be reset here, because it * is part of the CPU's reset domain, not the GIC device's. diff --git a/hw/intc/arm_gicv3_cpuif.c b/hw/intc/arm_gicv3_cpuif.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_cpuif.c +++ b/hw/intc/arm_gicv3_cpuif.c @@ -XXX,XX +XXX,XX @@ static void icc_activate_irq(GICv3CPUState *cs, int irq) cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1); cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0); gicv3_redist_update(cs); - } else { + } else if (irq < GICV3_LPI_INTID_START) { gicv3_gicd_active_set(cs->gic, irq); gicv3_gicd_pending_clear(cs->gic, irq); gicv3_update(cs->gic, irq, 1); + } else { + gicv3_redist_lpi_pending(cs, irq, 0); } } @@ -XXX,XX +XXX,XX @@ static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri, trace_gicv3_icc_eoir_write(is_eoir0 ? 0 : 1, gicv3_redist_affid(cs), value); - if (irq >= cs->gic->num_irq) { + if ((irq >= cs->gic->num_irq) && + !(cs->gic->lpi_enable && (irq >= GICV3_LPI_INTID_START))) { /* This handles two cases: * 1. If software writes the ID of a spurious interrupt [ie 1020-1023] * to the GICC_EOIR, the GIC ignores that write. diff --git a/hw/intc/arm_gicv3_its.c b/hw/intc/arm_gicv3_its.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_its.c +++ b/hw/intc/arm_gicv3_its.c @@ -XXX,XX +XXX,XX @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, uint64_t cte = 0; bool cte_valid = false; bool result = false; + uint64_t rdbase; if (cmd == NONE) { devid = offset; @@ -XXX,XX +XXX,XX @@ static bool process_its_cmd(GICv3ITSState *s, uint64_t value, uint32_t offset, * Current implementation only supports rdbase == procnum * Hence rdbase physical address is ignored */ + rdbase = (cte & GITS_CTE_RDBASE_PROCNUM_MASK) >> 1U; + + if (rdbase > s->gicv3->num_cpu) { + return result; + } + + if ((cmd == CLEAR) || (cmd == DISCARD)) { + gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 0); + } else { + gicv3_redist_process_lpi(&s->gicv3->cpu[rdbase], pIntid, 1); + } + if (cmd == DISCARD) { IteEntry ite = {}; /* remove mapping from interrupt translation table */ @@ -XXX,XX +XXX,XX @@ static void process_cmdq(GICv3ITSState *s) MemTxResult res = MEMTX_OK; bool result = true; uint8_t cmd; + int i; if (!(s->ctlr & ITS_CTLR_ENABLED)) { return; @@ -XXX,XX +XXX,XX @@ static void process_cmdq(GICv3ITSState *s) break; case GITS_CMD_INV: case GITS_CMD_INVALL: + /* + * Current implementation doesn't cache any ITS tables, + * but the calculated lpi priority information. We only + * need to trigger lpi priority re-calculation to be in + * sync with LPI config table or pending table changes. + */ + for (i = 0; i < s->gicv3->num_cpu; i++) { + gicv3_redist_update_lpi(&s->gicv3->cpu[i]); + } break; default: break; diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_redist.c +++ b/hw/intc/arm_gicv3_redist.c @@ -XXX,XX +XXX,XX @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr offset, if (cs->gicr_typer & GICR_TYPER_PLPIS) { if (value & GICR_CTLR_ENABLE_LPIS) { cs->gicr_ctlr |= GICR_CTLR_ENABLE_LPIS; + /* Check for any pending interr in pending table */ + gicv3_redist_update_lpi(cs); + gicv3_redist_update(cs); } else { cs->gicr_ctlr &= ~GICR_CTLR_ENABLE_LPIS; } @@ -XXX,XX +XXX,XX @@ MemTxResult gicv3_redist_write(void *opaque, hwaddr offset, uint64_t data, return r; } +static void gicv3_redist_check_lpi_priority(GICv3CPUState *cs, int irq) +{ + AddressSpace *as = &cs->gic->dma_as; + uint64_t lpict_baddr; + uint8_t lpite; + uint8_t prio; + + lpict_baddr = cs->gicr_propbaser & R_GICR_PROPBASER_PHYADDR_MASK; + + address_space_read(as, lpict_baddr + ((irq - GICV3_LPI_INTID_START) * + sizeof(lpite)), MEMTXATTRS_UNSPECIFIED, &lpite, + sizeof(lpite)); + + if (!(lpite & LPI_CTE_ENABLED)) { + return; + } + + if (cs->gic->gicd_ctlr & GICD_CTLR_DS) { + prio = lpite & LPI_PRIORITY_MASK; + } else { + prio = ((lpite & LPI_PRIORITY_MASK) >> 1) | 0x80; + } + + if ((prio < cs->hpplpi.prio) || + ((prio == cs->hpplpi.prio) && (irq <= cs->hpplpi.irq))) { + cs->hpplpi.irq = irq; + cs->hpplpi.prio = prio; + /* LPIs are always non-secure Grp1 interrupts */ + cs->hpplpi.grp = GICV3_G1NS; + } +} + +void gicv3_redist_update_lpi(GICv3CPUState *cs) +{ + /* + * This function scans the LPI pending table and for each pending + * LPI, reads the corresponding entry from LPI configuration table + * to extract the priority info and determine if the current LPI + * priority is lower than the last computed high priority lpi interrupt. + * If yes, replace current LPI as the new high priority lpi interrupt. + */ + AddressSpace *as = &cs->gic->dma_as; + uint64_t lpipt_baddr; + uint32_t pendt_size = 0; + uint8_t pend; + int i, bit; + uint64_t idbits; + + idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS), + GICD_TYPER_IDBITS); + + if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser || + !cs->gicr_pendbaser) { + return; + } + + cs->hpplpi.prio = 0xff; + + lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK; + + /* Determine the highest priority pending interrupt among LPIs */ + pendt_size = (1ULL << (idbits + 1)); + + for (i = GICV3_LPI_INTID_START / 8; i < pendt_size / 8; i++) { + address_space_read(as, lpipt_baddr + i, MEMTXATTRS_UNSPECIFIED, &pend, + sizeof(pend)); + + while (pend) { + bit = ctz32(pend); + gicv3_redist_check_lpi_priority(cs, i * 8 + bit); + pend &= ~(1 << bit); + } + } +} + +void gicv3_redist_lpi_pending(GICv3CPUState *cs, int irq, int level) +{ + /* + * This function updates the pending bit in lpi pending table for + * the irq being activated or deactivated. + */ + AddressSpace *as = &cs->gic->dma_as; + uint64_t lpipt_baddr; + bool ispend = false; + uint8_t pend; + + /* + * get the bit value corresponding to this irq in the + * lpi pending table + */ + lpipt_baddr = cs->gicr_pendbaser & R_GICR_PENDBASER_PHYADDR_MASK; + + address_space_read(as, lpipt_baddr + ((irq / 8) * sizeof(pend)), + MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend)); + + ispend = extract32(pend, irq % 8, 1); + + /* no change in the value of pending bit, return */ + if (ispend == level) { + return; + } + pend = deposit32(pend, irq % 8, 1, level ? 1 : 0); + + address_space_write(as, lpipt_baddr + ((irq / 8) * sizeof(pend)), + MEMTXATTRS_UNSPECIFIED, &pend, sizeof(pend)); + + /* + * check if this LPI is better than the current hpplpi, if yes + * just set hpplpi.prio and .irq without doing a full rescan + */ + if (level) { + gicv3_redist_check_lpi_priority(cs, irq); + } else { + if (irq == cs->hpplpi.irq) { + gicv3_redist_update_lpi(cs); + } + } +} + +void gicv3_redist_process_lpi(GICv3CPUState *cs, int irq, int level) +{ + uint64_t idbits; + + idbits = MIN(FIELD_EX64(cs->gicr_propbaser, GICR_PROPBASER, IDBITS), + GICD_TYPER_IDBITS); + + if (!(cs->gicr_ctlr & GICR_CTLR_ENABLE_LPIS) || !cs->gicr_propbaser || + !cs->gicr_pendbaser || (irq > (1ULL << (idbits + 1)) - 1) || + irq < GICV3_LPI_INTID_START) { + return; + } + + /* set/clear the pending bit for this irq */ + gicv3_redist_lpi_pending(cs, irq, level); + + gicv3_redist_update(cs); +} + void gicv3_redist_set_irq(GICv3CPUState *cs, int irq, int level) { /* Update redistributor state for a change in an external PPI input line */ -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Added expected IORT files applicable with latest GICv3 ITS changes.Temporarily differences in these files are okay. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210910143951.92242-8-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 4 ++++ tests/data/acpi/virt/IORT | 0 tests/data/acpi/virt/IORT.memhp | 0 tests/data/acpi/virt/IORT.numamem | 0 tests/data/acpi/virt/IORT.pxb | 0 5 files changed, 4 insertions(+) create mode 100644 tests/data/acpi/virt/IORT create mode 100644 tests/data/acpi/virt/IORT.memhp create mode 100644 tests/data/acpi/virt/IORT.numamem create mode 100644 tests/data/acpi/virt/IORT.pxb diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1 +1,5 @@ /* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/virt/IORT", +"tests/data/acpi/virt/IORT.memhp", +"tests/data/acpi/virt/IORT.numamem", +"tests/data/acpi/virt/IORT.pxb", diff --git a/tests/data/acpi/virt/IORT b/tests/data/acpi/virt/IORT new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/IORT.memhp b/tests/data/acpi/virt/IORT.memhp new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/IORT.numamem b/tests/data/acpi/virt/IORT.numamem new file mode 100644 index XXXXXXX..XXXXXXX diff --git a/tests/data/acpi/virt/IORT.pxb b/tests/data/acpi/virt/IORT.pxb new file mode 100644 index XXXXXXX..XXXXXXX -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Included creation of ITS as part of virt platform GIC initialization. This Emulated ITS model now co-exists with kvm ITS and is enabled in absence of kvm irq kernel support in a platform. Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210910143951.92242-9-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 2 ++ target/arm/kvm_arm.h | 4 ++-- hw/arm/virt.c | 29 +++++++++++++++++++++++++++-- 3 files changed, 31 insertions(+), 4 deletions(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { MachineClass parent; bool disallow_affinity_adjustment; bool no_its; + bool no_tcg_its; bool no_pmu; bool claim_edge_triggered_timers; bool smbios_old_sys_ver; @@ -XXX,XX +XXX,XX @@ struct VirtMachineState { bool highmem; bool highmem_ecam; bool its; + bool tcg_its; bool virt; bool ras; bool mte; diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ static inline const char *its_class_name(void) /* KVM implementation requires this capability */ return kvm_direct_msi_enabled() ? "arm-its-kvm" : NULL; } else { - /* Software emulation is not implemented yet */ - return NULL; + /* Software emulation based model */ + return "arm-gicv3-its"; } } diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_its(VirtMachineState *vms) const char *itsclass = its_class_name(); DeviceState *dev; + if (!strcmp(itsclass, "arm-gicv3-its")) { + if (!vms->tcg_its) { + itsclass = NULL; + } + } + if (!itsclass) { /* Do nothing if not supported */ return; @@ -XXX,XX +XXX,XX @@ static void create_v2m(VirtMachineState *vms) vms->msi_controller = VIRT_MSI_CTRL_GICV2M; } -static void create_gic(VirtMachineState *vms) +static void create_gic(VirtMachineState *vms, MemoryRegion *mem) { MachineState *ms = MACHINE(vms); /* We create a standalone GIC */ @@ -XXX,XX +XXX,XX @@ static void create_gic(VirtMachineState *vms) nb_redist_regions); qdev_prop_set_uint32(vms->gic, "redist-region-count[0]", redist0_count); + if (!kvm_irqchip_in_kernel()) { + if (vms->tcg_its) { + object_property_set_link(OBJECT(vms->gic), "sysmem", + OBJECT(mem), &error_fatal); + qdev_prop_set_bit(vms->gic, "has-lpi", true); + } + } + if (nb_redist_regions == 2) { uint32_t redist1_capacity = vms->memmap[VIRT_HIGH_GIC_REDIST2].size / GICV3_REDIST_SIZE; @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) virt_flash_fdt(vms, sysmem, secure_sysmem ?: sysmem); - create_gic(vms); + create_gic(vms, sysmem); virt_cpu_post_init(vms, sysmem); @@ -XXX,XX +XXX,XX @@ static void virt_instance_init(Object *obj) } else { /* Default allows ITS instantiation */ vms->its = true; + + if (vmc->no_tcg_its) { + vms->tcg_its = false; + } else { + vms->tcg_its = true; + } } /* Default disallows iommu instantiation */ @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 2) static void virt_machine_6_1_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_2_options(mc); compat_props_add(mc->compat_props, hw_compat_6_1, hw_compat_6_1_len); + + /* qemu ITS was introduced with 6.2 */ + vmc->no_tcg_its = true; } DEFINE_VIRT_MACHINE(6, 1) -- 2.20.1 From: Shashi Mallela <shashi.mallela@linaro.org> Updated expected IORT files applicable with latest GICv3 ITS changes. Full diff of new file disassembly: /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20180629 (64-bit version) * Copyright (c) 2000 - 2018 Intel Corporation * * Disassembly of tests/data/acpi/virt/IORT.pxb, Tue Jun 29 17:35:38 2021 * * ACPI Data Table [IORT] * * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue */ [000h 0000 4] Signature : "IORT" [IO Remapping Table] [004h 0004 4] Table Length : 0000007C [008h 0008 1] Revision : 00 [009h 0009 1] Checksum : 07 [00Ah 0010 6] Oem ID : "BOCHS " [010h 0016 8] Oem Table ID : "BXPC " [018h 0024 4] Oem Revision : 00000001 [01Ch 0028 4] Asl Compiler ID : "BXPC" [020h 0032 4] Asl Compiler Revision : 00000001 [024h 0036 4] Node Count : 00000002 [028h 0040 4] Node Offset : 00000030 [02Ch 0044 4] Reserved : 00000000 [030h 0048 1] Type : 00 [031h 0049 2] Length : 0018 [033h 0051 1] Revision : 00 [034h 0052 4] Reserved : 00000000 [038h 0056 4] Mapping Count : 00000000 [03Ch 0060 4] Mapping Offset : 00000000 [040h 0064 4] ItsCount : 00000001 [044h 0068 4] Identifiers : 00000000 [048h 0072 1] Type : 02 [049h 0073 2] Length : 0034 [04Bh 0075 1] Revision : 00 [04Ch 0076 4] Reserved : 00000000 [050h 0080 4] Mapping Count : 00000001 [054h 0084 4] Mapping Offset : 00000020 [058h 0088 8] Memory Properties : [IORT Memory Access Properties] [058h 0088 4] Cache Coherency : 00000001 [05Ch 0092 1] Hints (decoded below) : 00 Transient : 0 Write Allocate : 0 Read Allocate : 0 Override : 0 [05Dh 0093 2] Reserved : 0000 [05Fh 0095 1] Memory Flags (decoded below) : 03 Coherency : 1 Device Attribute : 1 [060h 0096 4] ATS Attribute : 00000000 [064h 0100 4] PCI Segment Number : 00000000 [068h 0104 1] Memory Size Limit : 00 [069h 0105 3] Reserved : 000000 [068h 0104 4] Input base : 00000000 [06Ch 0108 4] ID Count : 0000FFFF [070h 0112 4] Output Base : 00000000 [074h 0116 4] Output Reference : 00000030 [078h 0120 4] Flags (decoded below) : 00000000 Single Mapping : 0 Raw Table Data: Length 124 (0x7C) 0000: 49 4F 52 54 7C 00 00 00 00 07 42 4F 43 48 53 20 // IORT|.....BOCHS 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC 0020: 01 00 00 00 02 00 00 00 30 00 00 00 00 00 00 00 // ........0....... 0030: 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................ 0040: 01 00 00 00 00 00 00 00 02 34 00 00 00 00 00 00 // .........4...... 0050: 01 00 00 00 20 00 00 00 01 00 00 00 00 00 00 03 // .... ........... 0060: 00 00 00 00 00 00 00 00 00 00 00 00 FF FF 00 00 // ................ 0070: 00 00 00 00 30 00 00 00 00 00 00 00 // ....0....... Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org> Acked-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210910143951.92242-10-shashi.mallela@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/bios-tables-test-allowed-diff.h | 4 ---- tests/data/acpi/virt/IORT | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.memhp | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.numamem | Bin 0 -> 124 bytes tests/data/acpi/virt/IORT.pxb | Bin 0 -> 124 bytes 5 files changed, 4 deletions(-) diff --git a/tests/qtest/bios-tables-test-allowed-diff.h b/tests/qtest/bios-tables-test-allowed-diff.h index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/bios-tables-test-allowed-diff.h +++ b/tests/qtest/bios-tables-test-allowed-diff.h @@ -1,5 +1 @@ /* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/virt/IORT", -"tests/data/acpi/virt/IORT.memhp", -"tests/data/acpi/virt/IORT.numamem", -"tests/data/acpi/virt/IORT.pxb", diff --git a/tests/data/acpi/virt/IORT b/tests/data/acpi/virt/IORT index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 124 zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0# QRGb+i3L*dhhtM#y0PN=p0RR91 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/virt/IORT.memhp b/tests/data/acpi/virt/IORT.memhp index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 124 zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0# QRGb+i3L*dhhtM#y0PN=p0RR91 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/virt/IORT.numamem b/tests/data/acpi/virt/IORT.numamem index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 124 zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0# QRGb+i3L*dhhtM#y0PN=p0RR91 literal 0 HcmV?d00001 diff --git a/tests/data/acpi/virt/IORT.pxb b/tests/data/acpi/virt/IORT.pxb index XXXXXXX..XXXXXXX 100644 GIT binary patch literal 124 zcmebD4+^Pa00MR=e`k+i1*eDrX9XZ&1PX!JAesq?4S*O7Bw!2(4Uz`|CKCt^;wu0# QRGb+i3L*dhhtM#y0PN=p0RR91 literal 0 HcmV?d00001 -- 2.20.1 In v8A, the PSTATE.IL bit is set for various kinds of illegal exception return or mode-change attempts. We already set PSTATE.IL (or its AArch32 equivalent CPSR.IL) in all those cases, but we weren't implementing the part of the behaviour where attempting to execute an instruction with PSTATE.IL takes an immediate exception with an appropriate syndrome value. Add a new TB flags bit tracking PSTATE.IL/CPSR.IL, and generate code to take an exception instead of whatever the instruction would have been. PSTATE.IL and CPSR.IL change only on exception entry, attempted exception exit, and various AArch32 mode changes via cpsr_write(). These places generally already rebuild the hflags, so the only place we need an extra rebuild_hflags call is in the illegal-return codepath of the AArch64 exception_return helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210821195958.41312-2-richard.henderson@linaro.org Message-Id: <20210817162118.24319-1-peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [rth: Added missing returns; set IL bit in syndrome] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- target/arm/cpu.h | 1 + target/arm/syndrome.h | 5 +++++ target/arm/translate.h | 2 ++ target/arm/helper-a64.c | 1 + target/arm/helper.c | 8 ++++++++ target/arm/translate-a64.c | 11 +++++++++++ target/arm/translate.c | 21 +++++++++++++++++++++ 7 files changed, 49 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ FIELD(TBFLAG_ANY, FPEXC_EL, 8, 2) FIELD(TBFLAG_ANY, DEBUG_TARGET_EL, 10, 2) /* Memory operations require alignment: SCTLR_ELx.A or CCR.UNALIGN_TRP */ FIELD(TBFLAG_ANY, ALIGN_MEM, 12, 1) +FIELD(TBFLAG_ANY, PSTATE__IL, 13, 1) /* * Bit usage when in AArch32 state, both A- and M-profile. diff --git a/target/arm/syndrome.h b/target/arm/syndrome.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/syndrome.h +++ b/target/arm/syndrome.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t syn_wfx(int cv, int cond, int ti, bool is_16bit) (cv << 24) | (cond << 20) | ti; } +static inline uint32_t syn_illegalstate(void) +{ + return (EC_ILLEGALSTATE << ARM_EL_EC_SHIFT) | ARM_EL_IL; +} + #endif /* TARGET_ARM_SYNDROME_H */ diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { bool hstr_active; /* True if memory operations require alignment */ bool align_mem; + /* True if PSTATE.IL is set */ + bool pstate_il; /* * >= 0, a copy of PSTATE.BTYPE, which will be 0 without v8.5-BTI. * < 0, set by the current instruction. diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper-a64.c +++ b/target/arm/helper-a64.c @@ -XXX,XX +XXX,XX @@ illegal_return: if (!arm_singlestep_active(env)) { env->pstate &= ~PSTATE_SS; } + helper_rebuild_hflags_a64(env, cur_el); qemu_log_mask(LOG_GUEST_ERROR, "Illegal exception return at EL%d: " "resuming execution at 0x%" PRIx64 "\n", cur_el, env->pc); } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, DP_TBFLAG_A32(flags, HSTR_ACTIVE, 1); } + if (env->uncached_cpsr & CPSR_IL) { + DP_TBFLAG_ANY(flags, PSTATE__IL, 1); + } + return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); } @@ -XXX,XX +XXX,XX @@ static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, } } + if (env->pstate & PSTATE_IL) { + DP_TBFLAG_ANY(flags, PSTATE__IL, 1); + } + if (cpu_isar_feature(aa64_mte, env_archcpu(env))) { /* * Set MTE_ACTIVE if any access may be Checked, and leave clear diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void disas_a64_insn(CPUARMState *env, DisasContext *s) s->fp_access_checked = false; s->sve_access_checked = false; + if (s->pstate_il) { + /* + * Illegal execution state. This has priority over BTI + * exceptions, but comes after instruction abort exceptions. + */ + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_illegalstate(), default_exception_el(s)); + return; + } + if (dc_isar_feature(aa64_bti, s)) { if (s->base.num_insns == 1) { /* @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, #endif dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL); dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); + dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL); dc->sve_excp_el = EX_TBFLAG_A64(tb_flags, SVEEXC_EL); dc->sve_len = (EX_TBFLAG_A64(tb_flags, ZCR_LEN) + 1) * 16; dc->pauth_active = EX_TBFLAG_A64(tb_flags, PAUTH_ACTIVE); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) return; } + if (s->pstate_il) { + /* + * Illegal execution state. This has priority over BTI + * exceptions, but comes after instruction abort exceptions. + */ + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_illegalstate(), default_exception_el(s)); + return; + } + if (cond == 0xf) { /* In ARMv3 and v4 the NV condition is UNPREDICTABLE; we * choose to UNDEF. In ARMv5 and above the space is used @@ -XXX,XX +XXX,XX @@ static void arm_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs) #endif dc->fp_excp_el = EX_TBFLAG_ANY(tb_flags, FPEXC_EL); dc->align_mem = EX_TBFLAG_ANY(tb_flags, ALIGN_MEM); + dc->pstate_il = EX_TBFLAG_ANY(tb_flags, PSTATE__IL); if (arm_feature(env, ARM_FEATURE_M)) { dc->vfp_enabled = 1; @@ -XXX,XX +XXX,XX @@ static void thumb_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) } dc->insn = insn; + if (dc->pstate_il) { + /* + * Illegal execution state. This has priority over BTI + * exceptions, but comes after instruction abort exceptions. + */ + gen_exception_insn(dc, dc->pc_curr, EXCP_UDEF, + syn_illegalstate(), default_exception_el(dc)); + return; + } + if (dc->eci) { /* * For M-profile continuable instructions, ECI/ICI handling -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> It is confusing to have different exits from translation for various conditions in separate functions. Merge disas_a64_insn into its only caller. Standardize on the "s" name for the DisasContext, as the code from disas_a64_insn had more instances. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210821195958.41312-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 224 ++++++++++++++++++------------------- 1 file changed, 109 insertions(+), 115 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool btype_destination_ok(uint32_t insn, bool bt, int btype) return false; } -/* C3.1 A64 instruction index by encoding */ -static void disas_a64_insn(CPUARMState *env, DisasContext *s) -{ - uint32_t insn; - - s->pc_curr = s->base.pc_next; - insn = arm_ldl_code(env, s->base.pc_next, s->sctlr_b); - s->insn = insn; - s->base.pc_next += 4; - - s->fp_access_checked = false; - s->sve_access_checked = false; - - if (s->pstate_il) { - /* - * Illegal execution state. This has priority over BTI - * exceptions, but comes after instruction abort exceptions. - */ - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_illegalstate(), default_exception_el(s)); - return; - } - - if (dc_isar_feature(aa64_bti, s)) { - if (s->base.num_insns == 1) { - /* - * At the first insn of the TB, compute s->guarded_page. - * We delayed computing this until successfully reading - * the first insn of the TB, above. This (mostly) ensures - * that the softmmu tlb entry has been populated, and the - * page table GP bit is available. - * - * Note that we need to compute this even if btype == 0, - * because this value is used for BR instructions later - * where ENV is not available. - */ - s->guarded_page = is_guarded_page(env, s); - - /* First insn can have btype set to non-zero. */ - tcg_debug_assert(s->btype >= 0); - - /* - * Note that the Branch Target Exception has fairly high - * priority -- below debugging exceptions but above most - * everything else. This allows us to handle this now - * instead of waiting until the insn is otherwise decoded. - */ - if (s->btype != 0 - && s->guarded_page - && !btype_destination_ok(insn, s->bt, s->btype)) { - gen_exception_insn(s, s->pc_curr, EXCP_UDEF, - syn_btitrap(s->btype), - default_exception_el(s)); - return; - } - } else { - /* Not the first insn: btype must be 0. */ - tcg_debug_assert(s->btype == 0); - } - } - - switch (extract32(insn, 25, 4)) { - case 0x0: case 0x1: case 0x3: /* UNALLOCATED */ - unallocated_encoding(s); - break; - case 0x2: - if (!dc_isar_feature(aa64_sve, s) || !disas_sve(s, insn)) { - unallocated_encoding(s); - } - break; - case 0x8: case 0x9: /* Data processing - immediate */ - disas_data_proc_imm(s, insn); - break; - case 0xa: case 0xb: /* Branch, exception generation and system insns */ - disas_b_exc_sys(s, insn); - break; - case 0x4: - case 0x6: - case 0xc: - case 0xe: /* Loads and stores */ - disas_ldst(s, insn); - break; - case 0x5: - case 0xd: /* Data processing - register */ - disas_data_proc_reg(s, insn); - break; - case 0x7: - case 0xf: /* Data processing - SIMD and floating point */ - disas_data_proc_simd_fp(s, insn); - break; - default: - assert(FALSE); /* all 15 cases should be handled above */ - break; - } - - /* if we allocated any temporaries, free them here */ - free_tmp_a64(s); - - /* - * After execution of most insns, btype is reset to 0. - * Note that we set btype == -1 when the insn sets btype. - */ - if (s->btype > 0 && s->base.is_jmp != DISAS_NORETURN) { - reset_btype(s); - } -} - static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cpu) { @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_insn_start(DisasContextBase *dcbase, CPUState *cpu) static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) { - DisasContext *dc = container_of(dcbase, DisasContext, base); + DisasContext *s = container_of(dcbase, DisasContext, base); CPUARMState *env = cpu->env_ptr; + uint32_t insn; - if (dc->ss_active && !dc->pstate_ss) { + if (s->ss_active && !s->pstate_ss) { /* Singlestep state is Active-pending. * If we're in this state at the start of a TB then either * a) we just took an exception to an EL which is being debugged @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_translate_insn(DisasContextBase *dcbase, CPUState *cpu) * "did not step an insn" case, and so the syndrome ISV and EX * bits should be zero. */ - assert(dc->base.num_insns == 1); - gen_swstep_exception(dc, 0, 0); - dc->base.is_jmp = DISAS_NORETURN; - } else { - disas_a64_insn(env, dc); + assert(s->base.num_insns == 1); + gen_swstep_exception(s, 0, 0); + s->base.is_jmp = DISAS_NORETURN; + return; } - translator_loop_temp_check(&dc->base); + s->pc_curr = s->base.pc_next; + insn = arm_ldl_code(env, s->base.pc_next, s->sctlr_b); + s->insn = insn; + s->base.pc_next += 4; + + s->fp_access_checked = false; + s->sve_access_checked = false; + + if (s->pstate_il) { + /* + * Illegal execution state. This has priority over BTI + * exceptions, but comes after instruction abort exceptions. + */ + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_illegalstate(), default_exception_el(s)); + return; + } + + if (dc_isar_feature(aa64_bti, s)) { + if (s->base.num_insns == 1) { + /* + * At the first insn of the TB, compute s->guarded_page. + * We delayed computing this until successfully reading + * the first insn of the TB, above. This (mostly) ensures + * that the softmmu tlb entry has been populated, and the + * page table GP bit is available. + * + * Note that we need to compute this even if btype == 0, + * because this value is used for BR instructions later + * where ENV is not available. + */ + s->guarded_page = is_guarded_page(env, s); + + /* First insn can have btype set to non-zero. */ + tcg_debug_assert(s->btype >= 0); + + /* + * Note that the Branch Target Exception has fairly high + * priority -- below debugging exceptions but above most + * everything else. This allows us to handle this now + * instead of waiting until the insn is otherwise decoded. + */ + if (s->btype != 0 + && s->guarded_page + && !btype_destination_ok(insn, s->bt, s->btype)) { + gen_exception_insn(s, s->pc_curr, EXCP_UDEF, + syn_btitrap(s->btype), + default_exception_el(s)); + return; + } + } else { + /* Not the first insn: btype must be 0. */ + tcg_debug_assert(s->btype == 0); + } + } + + switch (extract32(insn, 25, 4)) { + case 0x0: case 0x1: case 0x3: /* UNALLOCATED */ + unallocated_encoding(s); + break; + case 0x2: + if (!dc_isar_feature(aa64_sve, s) || !disas_sve(s, insn)) { + unallocated_encoding(s); + } + break; + case 0x8: case 0x9: /* Data processing - immediate */ + disas_data_proc_imm(s, insn); + break; + case 0xa: case 0xb: /* Branch, exception generation and system insns */ + disas_b_exc_sys(s, insn); + break; + case 0x4: + case 0x6: + case 0xc: + case 0xe: /* Loads and stores */ + disas_ldst(s, insn); + break; + case 0x5: + case 0xd: /* Data processing - register */ + disas_data_proc_reg(s, insn); + break; + case 0x7: + case 0xf: /* Data processing - SIMD and floating point */ + disas_data_proc_simd_fp(s, insn); + break; + default: + assert(FALSE); /* all 15 cases should be handled above */ + break; + } + + /* if we allocated any temporaries, free them here */ + free_tmp_a64(s); + + /* + * After execution of most insns, btype is reset to 0. + * Note that we set btype == -1 when the insn sets btype. + */ + if (s->btype > 0 && s->base.is_jmp != DISAS_NORETURN) { + reset_btype(s); + } + + translator_loop_temp_check(&s->base); } static void aarch64_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) -- 2.20.1 By default, QEMU will allow devices to be plugged into a bus up to the bus class's device count limit. If the user creates a device on the command line or via the monitor and doesn't explicitly specify the bus to plug it in, QEMU will plug it into the first non-full bus that it finds. This is fine in most cases, but some machines have multiple buses of a given type, some of which are dedicated to on-board devices and some of which have an externally exposed connector for user-pluggable devices. One example is I2C buses. Provide a new function qbus_mark_full() so that a machine model can mark this kind of "internal only" bus as 'full' after it has created all the devices that should be plugged into that bus. The "find a non-full bus" algorithm will then skip the internal-only bus when looking for a place to plug in user-created devices. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210903151435.22379-2-peter.maydell@linaro.org --- include/hw/qdev-core.h | 24 ++++++++++++++++++++++++ softmmu/qdev-monitor.c | 7 ++++++- 2 files changed, 30 insertions(+), 1 deletion(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ struct BusState { HotplugHandler *hotplug_handler; int max_index; bool realized; + bool full; int num_children; /* @@ -XXX,XX +XXX,XX @@ static inline bool qbus_is_hotpluggable(BusState *bus) return bus->hotplug_handler; } +/** + * qbus_mark_full: Mark this bus as full, so no more devices can be attached + * @bus: Bus to mark as full + * + * By default, QEMU will allow devices to be plugged into a bus up + * to the bus class's device count limit. Calling this function + * marks a particular bus as full, so that no more devices can be + * plugged into it. In particular this means that the bus will not + * be considered as a candidate for plugging in devices created by + * the user on the commandline or via the monitor. + * If a machine has multiple buses of a given type, such as I2C, + * where some of those buses in the real hardware are used only for + * internal devices and some are exposed via expansion ports, you + * can use this function to mark the internal-only buses as full + * after you have created all their internal devices. Then user + * created devices will appear on the expansion-port bus where + * guest software expects them. + */ +static inline void qbus_mark_full(BusState *bus) +{ + bus->full = true; +} + void device_listener_register(DeviceListener *listener); void device_listener_unregister(DeviceListener *listener); diff --git a/softmmu/qdev-monitor.c b/softmmu/qdev-monitor.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/qdev-monitor.c +++ b/softmmu/qdev-monitor.c @@ -XXX,XX +XXX,XX @@ static DeviceState *qbus_find_dev(BusState *bus, char *elem) static inline bool qbus_is_full(BusState *bus) { - BusClass *bus_class = BUS_GET_CLASS(bus); + BusClass *bus_class; + + if (bus->full) { + return true; + } + bus_class = BUS_GET_CLASS(bus); return bus_class->max_dev && bus->num_children >= bus_class->max_dev; } -- 2.20.1 The mps2-tz boards use a data-driven structure to create the devices that sit behind peripheral protection controllers. Currently the functions which create these devices are passed an 'opaque' pointer which is always the address within the machine struct of the device to create, and some "all devices need this" information like irqs and addresses. If a specific device needs more information than this, it is currently not possible to pass that through from the PPCInfo data structure. Add support for passing an extra data parameter, so that we can more flexibly handle the needs of specific device types. To provide some type-safety we make this extra parameter a pointer to a union (which initially has no members). In particular, we would like to be able to indicate which of the i2c controllers are for on-board devices only and which are connected to the external 'shield' expansion port; a subsequent patch will use this mechanism for that purpose. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210903151435.22379-3-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno) } } +/* Union describing the device-specific extra data we pass to the devfn. */ +typedef union PPCExtraData { +} PPCExtraData; + /* Most of the devices in the AN505 FPGA image sit behind * Peripheral Protection Controllers. These data structures * define the layout of which devices sit behind which PPCs. @@ -XXX,XX +XXX,XX @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno) */ typedef MemoryRegion *MakeDevFn(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs); + const int *irqs, + const PPCExtraData *extradata); typedef struct PPCPortInfo { const char *name; @@ -XXX,XX +XXX,XX @@ typedef struct PPCPortInfo { hwaddr addr; hwaddr size; int irqs[3]; /* currently no device needs more IRQ lines than this */ + PPCExtraData extradata; /* to pass device-specific info to the devfn */ } PPCPortInfo; typedef struct PPCInfo { @@ -XXX,XX +XXX,XX @@ typedef struct PPCInfo { static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, + const PPCExtraData *extradata) { /* Initialize, configure and realize a TYPE_UNIMPLEMENTED_DEVICE, * and return a pointer to its MemoryRegion. @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_unimp_dev(MPS2TZMachineState *mms, static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, const PPCExtraData *extradata) { /* The irq[] array is tx, rx, combined, in that order */ MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_uart(MPS2TZMachineState *mms, void *opaque, static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, const PPCExtraData *extradata) { MPS2SCC *scc = opaque; DeviceState *sccdev; @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_scc(MPS2TZMachineState *mms, void *opaque, static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, const PPCExtraData *extradata) { MPS2FPGAIO *fpgaio = opaque; MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_GET_CLASS(mms); @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_fpgaio(MPS2TZMachineState *mms, void *opaque, static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, + const PPCExtraData *extradata) { SysBusDevice *s; NICInfo *nd = &nd_table[0]; @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_dev(MPS2TZMachineState *mms, void *opaque, static MemoryRegion *make_eth_usb(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, + const PPCExtraData *extradata) { /* * The AN524 makes the ethernet and USB share a PPC port. @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_eth_usb(MPS2TZMachineState *mms, void *opaque, static MemoryRegion *make_mpc(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, const PPCExtraData *extradata) { TZMPC *mpc = opaque; int i = mpc - &mms->mpc[0]; @@ -XXX,XX +XXX,XX @@ static void remap_irq_fn(void *opaque, int n, int level) static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, const PPCExtraData *extradata) { /* The irq[] array is DMACINTR, DMACINTERR, DMACINTTC, in that order */ PL080State *dma = opaque; @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_dma(MPS2TZMachineState *mms, void *opaque, static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, const PPCExtraData *extradata) { /* * The AN505 has five PL022 SPI controllers. @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_spi(MPS2TZMachineState *mms, void *opaque, static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, const PPCExtraData *extradata) { ArmSbconI2CState *i2c = opaque; SysBusDevice *s; @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque, static MemoryRegion *make_rtc(MPS2TZMachineState *mms, void *opaque, const char *name, hwaddr size, - const int *irqs) + const int *irqs, const PPCExtraData *extradata) { PL031State *pl031 = opaque; SysBusDevice *s; @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) } mr = pinfo->devfn(mms, pinfo->opaque, pinfo->name, pinfo->size, - pinfo->irqs); + pinfo->irqs, &pinfo->extradata); portname = g_strdup_printf("port[%d]", port); object_property_set_link(OBJECT(ppc), portname, OBJECT(mr), &error_fatal); -- 2.20.1 The various MPS2 boards have multiple I2C buses: typically a bus dedicated to the audio configuration, one for the LCD touchscreen controller, one for a DDR4 EEPROM, and two which are connected to the external Shield expansion connector. Mark the buses which are used only for board-internal devices as 'full' so that if the user creates i2c devices on the commandline without specifying a bus name then they will be connected to the I2C controller used for the Shield connector, where guest software will expect them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210903151435.22379-4-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 57 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 14 deletions(-) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static qemu_irq get_sse_irq_in(MPS2TZMachineState *mms, int irqno) /* Union describing the device-specific extra data we pass to the devfn. */ typedef union PPCExtraData { + bool i2c_internal; } PPCExtraData; /* Most of the devices in the AN505 FPGA image sit behind @@ -XXX,XX +XXX,XX @@ static MemoryRegion *make_i2c(MPS2TZMachineState *mms, void *opaque, object_initialize_child(OBJECT(mms), name, i2c, TYPE_ARM_SBCON_I2C); s = SYS_BUS_DEVICE(i2c); sysbus_realize(s, &error_fatal); + + /* + * If this is an internal-use-only i2c bus, mark it full + * so that user-created i2c devices are not plugged into it. + * If we implement models of any on-board i2c devices that + * plug in to one of the internal-use-only buses, then we will + * need to create and plugging those in here before we mark the + * bus as full. + */ + if (extradata->i2c_internal) { + BusState *qbus = qdev_get_child_bus(DEVICE(i2c), "i2c"); + qbus_mark_full(qbus); + } + return sysbus_mmio_get_region(s, 0); } @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) { "uart2", make_uart, &mms->uart[2], 0x40202000, 0x1000, { 36, 37, 44 } }, { "uart3", make_uart, &mms->uart[3], 0x40203000, 0x1000, { 38, 39, 45 } }, { "uart4", make_uart, &mms->uart[4], 0x40204000, 0x1000, { 40, 41, 46 } }, - { "i2c0", make_i2c, &mms->i2c[0], 0x40207000, 0x1000 }, - { "i2c1", make_i2c, &mms->i2c[1], 0x40208000, 0x1000 }, - { "i2c2", make_i2c, &mms->i2c[2], 0x4020c000, 0x1000 }, - { "i2c3", make_i2c, &mms->i2c[3], 0x4020d000, 0x1000 }, + { "i2c0", make_i2c, &mms->i2c[0], 0x40207000, 0x1000, {}, + { .i2c_internal = true /* touchscreen */ } }, + { "i2c1", make_i2c, &mms->i2c[1], 0x40208000, 0x1000, {}, + { .i2c_internal = true /* audio conf */ } }, + { "i2c2", make_i2c, &mms->i2c[2], 0x4020c000, 0x1000, {}, + { .i2c_internal = false /* shield 0 */ } }, + { "i2c3", make_i2c, &mms->i2c[3], 0x4020d000, 0x1000, {}, + { .i2c_internal = false /* shield 1 */ } }, }, }, { .name = "apb_ppcexp2", @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) }, { .name = "apb_ppcexp1", .ports = { - { "i2c0", make_i2c, &mms->i2c[0], 0x41200000, 0x1000 }, - { "i2c1", make_i2c, &mms->i2c[1], 0x41201000, 0x1000 }, + { "i2c0", make_i2c, &mms->i2c[0], 0x41200000, 0x1000, {}, + { .i2c_internal = true /* touchscreen */ } }, + { "i2c1", make_i2c, &mms->i2c[1], 0x41201000, 0x1000, {}, + { .i2c_internal = true /* audio conf */ } }, { "spi0", make_spi, &mms->spi[0], 0x41202000, 0x1000, { 52 } }, { "spi1", make_spi, &mms->spi[1], 0x41203000, 0x1000, { 53 } }, { "spi2", make_spi, &mms->spi[2], 0x41204000, 0x1000, { 54 } }, - { "i2c2", make_i2c, &mms->i2c[2], 0x41205000, 0x1000 }, - { "i2c3", make_i2c, &mms->i2c[3], 0x41206000, 0x1000 }, + { "i2c2", make_i2c, &mms->i2c[2], 0x41205000, 0x1000, {}, + { .i2c_internal = false /* shield 0 */ } }, + { "i2c3", make_i2c, &mms->i2c[3], 0x41206000, 0x1000, {}, + { .i2c_internal = false /* shield 1 */ } }, { /* port 7 reserved */ }, - { "i2c4", make_i2c, &mms->i2c[4], 0x41208000, 0x1000 }, + { "i2c4", make_i2c, &mms->i2c[4], 0x41208000, 0x1000, {}, + { .i2c_internal = true /* DDR4 EEPROM */ } }, }, }, { .name = "apb_ppcexp2", @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) }, { .name = "apb_ppcexp1", .ports = { - { "i2c0", make_i2c, &mms->i2c[0], 0x49200000, 0x1000 }, - { "i2c1", make_i2c, &mms->i2c[1], 0x49201000, 0x1000 }, + { "i2c0", make_i2c, &mms->i2c[0], 0x49200000, 0x1000, {}, + { .i2c_internal = true /* touchscreen */ } }, + { "i2c1", make_i2c, &mms->i2c[1], 0x49201000, 0x1000, {}, + { .i2c_internal = true /* audio conf */ } }, { "spi0", make_spi, &mms->spi[0], 0x49202000, 0x1000, { 53 } }, { "spi1", make_spi, &mms->spi[1], 0x49203000, 0x1000, { 54 } }, { "spi2", make_spi, &mms->spi[2], 0x49204000, 0x1000, { 55 } }, - { "i2c2", make_i2c, &mms->i2c[2], 0x49205000, 0x1000 }, - { "i2c3", make_i2c, &mms->i2c[3], 0x49206000, 0x1000 }, + { "i2c2", make_i2c, &mms->i2c[2], 0x49205000, 0x1000, {}, + { .i2c_internal = false /* shield 0 */ } }, + { "i2c3", make_i2c, &mms->i2c[3], 0x49206000, 0x1000, {}, + { .i2c_internal = false /* shield 1 */ } }, { /* port 7 reserved */ }, - { "i2c4", make_i2c, &mms->i2c[4], 0x49208000, 0x1000 }, + { "i2c4", make_i2c, &mms->i2c[4], 0x49208000, 0x1000, {}, + { .i2c_internal = true /* DDR4 EEPROM */ } }, }, }, { .name = "apb_ppcexp2", -- 2.20.1 The various MPS2 boards implemented in mps2.c have multiple I2C buses: a bus dedicated to the audio configuration, one for the LCD touchscreen controller, and two which are connected to the external Shield expansion connector. Mark the buses which are used only for board-internal devices as 'full' so that if the user creates i2c devices on the commandline without specifying a bus name then they will be connected to the I2C controller used for the Shield connector, where guest software will expect them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210903151435.22379-5-peter.maydell@linaro.org --- hw/arm/mps2.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) 0x40023000, /* Audio */ 0x40029000, /* Shield0 */ 0x4002a000}; /* Shield1 */ - sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL); + DeviceState *dev; + + dev = sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL); + if (i < 2) { + /* + * internal-only bus: mark it full to avoid user-created + * i2c devices being plugged into it. + */ + BusState *qbus = qdev_get_child_bus(dev, "i2c"); + qbus_mark_full(qbus); + } } create_unimplemented_device("i2s", 0x40024000, 0x400); -- 2.20.1 Hi; here's the latest round of arm patches. I have included also my patchset for the RTC devices to avoid keeping time_t and time_t diffs in 32-bit variables. thanks -- PMM The following changes since commit 156618d9ea67f2f2e31d9dedd97f2dcccbe6808c: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-08-30 09:20:27 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230831 for you to fetch changes up to e73b8bb8a3e9a162f70e9ffbf922d4fafc96bbfb: hw/arm: Set number of MPU regions correctly for an505, an521, an524 (2023-08-31 11:07:02 +0100) ---------------------------------------------------------------- target-arm queue: * Some of the preliminary patches for Cortex-A710 support * i.MX7 and i.MX6UL refactoring * Implement SRC device for i.MX7 * Catch illegal-exception-return from EL3 with bad NSE/NS * Use 64-bit offsets for holding time_t differences in RTC devices * Model correct number of MPU regions for an505, an521, an524 boards ---------------------------------------------------------------- Alex Bennée (1): target/arm: properly document FEAT_CRC32 Jean-Christophe Dubois (6): Remove i.MX7 IOMUX GPR device from i.MX6UL Refactor i.MX6UL processor code Add i.MX6UL missing devices. Refactor i.MX7 processor code Add i.MX7 missing TZ devices and memory regions Add i.MX7 SRC device implementation Peter Maydell (8): target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm() hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference rtc: Use time_t for passing and returning time offsets target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties hw/arm: Set number of MPU regions correctly for an505, an521, an524 Richard Henderson (9): target/arm: Reduce dcz_blocksize to uint8_t target/arm: Allow cpu to configure GM blocksize target/arm: Support more GM blocksizes target/arm: When tag memory is not present, set MTE=1 target/arm: Introduce make_ccsidr64 target/arm: Apply access checks to neoverse-n1 special registers target/arm: Apply access checks to neoverse-v1 special registers target/arm: Suppress FEAT_TRBE (Trace Buffer Extension) target/arm: Implement FEAT_HPDS2 as a no-op docs/system/arm/emulation.rst | 2 + include/hw/arm/armsse.h | 5 + include/hw/arm/armv7m.h | 8 + include/hw/arm/fsl-imx6ul.h | 158 ++++++++++++++++--- include/hw/arm/fsl-imx7.h | 338 ++++++++++++++++++++++++++++++----------- include/hw/misc/imx7_src.h | 66 ++++++++ include/hw/rtc/aspeed_rtc.h | 2 +- include/sysemu/rtc.h | 4 +- target/arm/cpregs.h | 2 + target/arm/cpu.h | 5 +- target/arm/internals.h | 6 - target/arm/tcg/translate.h | 2 + hw/arm/armsse.c | 16 ++ hw/arm/armv7m.c | 21 +++ hw/arm/fsl-imx6ul.c | 174 +++++++++++++-------- hw/arm/fsl-imx7.c | 201 +++++++++++++++++++----- hw/arm/mps2-tz.c | 29 ++++ hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++ hw/rtc/aspeed_rtc.c | 5 +- hw/rtc/m48t59.c | 2 +- hw/rtc/twl92230.c | 4 +- softmmu/rtc.c | 4 +- target/arm/cpu.c | 207 ++++++++++++++----------- target/arm/helper.c | 15 +- target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 102 +++++++++---- target/arm/tcg/helper-a64.c | 9 ++ target/arm/tcg/mte_helper.c | 90 ++++++++--- target/arm/tcg/translate-a64.c | 5 +- hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 31 files changed, 1393 insertions(+), 372 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c From: Richard Henderson <richard.henderson@linaro.org> This value is only 4 bits wide. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230811214031.171020-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool prop_lpa2; /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ - uint32_t dcz_blocksize; + uint8_t dcz_blocksize; + uint64_t rvbar_prop; /* Property/input signals. */ /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we hard-coded the blocksize with GMID_EL1_BS. But the value we choose for -cpu max does not match the value that cortex-a710 uses. Mirror the way we handle dcz_blocksize. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230811214031.171020-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 6 ----- target/arm/tcg/translate.h | 2 ++ target/arm/helper.c | 11 +++++--- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/mte_helper.c | 46 ++++++++++++++++++++++------------ target/arm/tcg/translate-a64.c | 5 ++-- 7 files changed, 45 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint8_t dcz_blocksize; + /* GM blocksize, in log_2(words), ie low 4 bits of GMID_EL0 */ + uint8_t gm_blocksize; uint64_t rvbar_prop; /* Property/input signals. */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs); #endif /* !CONFIG_USER_ONLY */ -/* - * The log2 of the words in the tag block, for GMID_EL1.BS. - * The is the maximum, 256 bytes, which manipulates 64-bits of tags. - */ -#define GMID_EL1_BS 6 - /* * SVE predicates are 1/8 the size of SVE vectors, and cannot use * the same simd_desc() encoding due to restrictions on size. diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.h +++ b/target/arm/tcg/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int8_t btype; /* A copy of cpu->dcz_blocksize. */ uint8_t dcz_blocksize; + /* A copy of cpu->gm_blocksize. */ + uint8_t gm_blocksize; /* True if this page is guarded. */ bool guarded_page; /* Bottom two bits of XScale c15_cpar coprocessor access control reg */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, .access = PL1_RW, .accessfn = access_mte, .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, - { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, - .access = PL1_R, .accessfn = access_aa64_tid5, - .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, { .name = "TCO", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, .type = ARM_CP_NO_RAW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * then define only a RAZ/WI version of PSTATE.TCO. */ if (cpu_isar_feature(aa64_mte, cpu)) { + ARMCPRegInfo gmid_reginfo = { + .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL1_R, .accessfn = access_aa64_tid5, + .type = ARM_CP_CONST, .resetvalue = cpu->gm_blocksize, + }; + define_one_arm_cp_reg(cpu, &gmid_reginfo); define_arm_cp_regs(cpu, mte_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + cpu->gm_blocksize = 6; /* 256 bytes */ cpu->sve_vq.supported = MAKE_64BIT_MASK(0, ARM_MAX_VQ); cpu->sme_vq.supported = SVE_VQ_POW2_MAP; diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(st2g_stub)(CPUARMState *env, uint64_t ptr) } } -#define LDGM_STGM_SIZE (4 << GMID_EL1_BS) - uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_LOAD, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* The tag is squashed to zero if the page does not support tags. */ if (!tag_mem) { return 0; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are loading 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - return ldq_le_p(tag_mem); + switch (gm_bs) { + case 6: + /* 256 bytes -> 16 tags -> 64 result bits */ + return ldq_le_p(tag_mem); + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_STORE, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* * Tag store only happens if the page support tags, @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are storing 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - stq_le_p(tag_mem, val); + switch (gm_bs) { + case 6: + stq_le_p(tag_mem, val); + break; + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STGM(DisasContext *s, arg_ldst_tag *a) gen_helper_stgm(cpu_env, addr, tcg_rt); } else { MMUAccessType acc = MMU_DATA_STORE; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static bool trans_LDGM(DisasContext *s, arg_ldst_tag *a) gen_helper_ldgm(tcg_rt, cpu_env, addr); } else { MMUAccessType acc = MMU_DATA_LOAD; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->cp_regs = arm_cpu->cp_regs; dc->features = env->features; dc->dcz_blocksize = arm_cpu->dcz_blocksize; + dc->gm_blocksize = arm_cpu->gm_blocksize; #ifdef CONFIG_USER_ONLY /* In sve_probe_page, we assume TBI is enabled. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Support all of the easy GM block sizes. Use direct memory operations, since the pointers are aligned. While BS=2 (16 bytes, 1 tag) is a legal setting, that requires an atomic store of one nibble. This is not difficult, but there is also no point in supporting it until required. Note that cortex-a710 sets GM blocksize to match its cacheline size of 64 bytes. I expect many implementations will also match the cacheline, which makes 16 bytes very unlikely. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 18 +++++++++--- target/arm/tcg/mte_helper.c | 56 +++++++++++++++++++++++++++++++------ 2 files changed, 62 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) ID_PFR1, VIRTUALIZATION, 0); } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* + * The architectural range of GM blocksize is 2-6, however qemu + * doesn't support blocksize of 2 (see HELPER(ldgm)). + */ + if (tcg_enabled()) { + assert(cpu->gm_blocksize >= 3 && cpu->gm_blocksize <= 6); + } + #ifndef CONFIG_USER_ONLY - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) { /* * Disable the MTE feature bits if we do not have tag-memory * provided by the machine. */ - cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); - } + if (cpu->tag_memory == NULL) { + cpu->isar.id_aa64pfr1 = + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + } #endif + } if (tcg_enabled()) { /* diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + uint64_t ret; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) /* * The ordering of elements within the word corresponds to - * a little-endian operation. + * a little-endian operation. Computation of shift comes from + * + * index = address<LOG2_TAG_GRANULE+3:LOG2_TAG_GRANULE> + * data<index*4+3:index*4> = tag + * + * Because of the alignment of ptr above, BS=6 has shift=0. + * All memory operations are aligned. Defer support for BS=2, + * requiring insertion or extraction of a nibble, until we + * support a cpu that requires it. */ switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + ret = *(uint8_t *)tag_mem; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + ret = cpu_to_le16(*(uint16_t *)tag_mem); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + ret = cpu_to_le32(*(uint32_t *)tag_mem); + break; case 6: /* 256 bytes -> 16 tags -> 64 result bits */ - return ldq_le_p(tag_mem); + return cpu_to_le64(*(uint64_t *)tag_mem); default: - /* cpu configured with unsupported gm blocksize. */ + /* + * CPU configured with unsupported/invalid gm blocksize. + * This is detected early in arm_cpu_realizefn. + */ g_assert_not_reached(); } + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + return ret << shift; } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - /* - * The ordering of elements within the word corresponds to - * a little-endian operation. - */ + /* See LDGM for comments on BS and on shift. */ + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + val >>= shift; switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + *(uint8_t *)tag_mem = val; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + *(uint16_t *)tag_mem = cpu_to_le16(val); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + *(uint32_t *)tag_mem = cpu_to_le32(val); + break; case 6: - stq_le_p(tag_mem, val); + /* 256 bytes -> 16 tags -> 64 result bits */ + *(uint64_t *)tag_mem = cpu_to_le64(val); break; default: /* cpu configured with unsupported gm blocksize. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When the cpu support MTE, but the system does not, reduce cpu support to user instructions at EL0 instead of completely disabling MTE. If we encounter a cpu implementation which does something else, we can revisit this setting. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) #ifndef CONFIG_USER_ONLY /* - * Disable the MTE feature bits if we do not have tag-memory - * provided by the machine. + * If we do not have tag-memory provided by the machine, + * reduce MTE support to instructions enabled at EL0. + * This matches Cortex-A710 BROADCASTMTE input being LOW. */ if (cpu->tag_memory == NULL) { cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 1); } #endif } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Do not hard-code the constants for Neoverse V1. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 48 ++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" +#include "qemu/units.h" #include "internals.h" #include "cpregs.h" +static uint64_t make_ccsidr64(unsigned assoc, unsigned linesize, + unsigned cachesize) +{ + unsigned lg_linesize = ctz32(linesize); + unsigned sets; + + /* + * The 64-bit CCSIDR_EL1 format is: + * [55:32] number of sets - 1 + * [23:3] associativity - 1 + * [2:0] log2(linesize) - 4 + * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc + */ + assert(assoc != 0); + assert(is_power_of_2(linesize)); + assert(lg_linesize >= 4 && lg_linesize <= 7 + 4); + + /* sets * associativity * linesize == cachesize. */ + sets = cachesize / (assoc * linesize); + assert(cachesize % (assoc * linesize) == 0); + + return ((uint64_t)(sets - 1) << 32) + | ((assoc - 1) << 3) + | (lg_linesize - 4); +} + static void aarch64_a35_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_neoverse_v1_initfn(Object *obj) * The Neoverse-V1 r1p2 TRM lists 32-bit format CCSIDR_EL1 values, * but also says it implements CCIDX, which means they should be * 64-bit format. So we here use values which are based on the textual - * information in chapter 2 of the TRM (and on the fact that - * sets * associativity * linesize == cachesize). - * - * The 64-bit CCSIDR_EL1 format is: - * [55:32] number of sets - 1 - * [23:3] associativity - 1 - * [2:0] log2(linesize) - 4 - * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc - * - * L1: 4-way set associative 64-byte line size, total size 64K, - * so sets is 256. + * information in chapter 2 of the TRM: * + * L1: 4-way set associative 64-byte line size, total size 64K. * L2: 8-way set associative, 64 byte line size, either 512K or 1MB. - * We pick 1MB, so this has 2048 sets. - * * L3: No L3 (this matches the CLIDR_EL1 value). */ - cpu->ccsidr[0] = 0x000000ff0000001aull; /* 64KB L1 dcache */ - cpu->ccsidr[1] = 0x000000ff0000001aull; /* 64KB L1 icache */ - cpu->ccsidr[2] = 0x000007ff0000003aull; /* 1MB L2 cache */ + cpu->ccsidr[0] = make_ccsidr64(4, 64, 64 * KiB); /* L1 dcache */ + cpu->ccsidr[1] = cpu->ccsidr[0]; /* L1 icache */ + cpu->ccsidr[2] = make_ccsidr64(8, 64, 1 * MiB); /* L2 cache */ /* From 3.2.115 SCTLR_EL3 */ cpu->reset_sctlr = 0x30c50838; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Access to many of the special registers is enabled or disabled by ACTLR_EL[23], which we implement as constant 0, which means that all writes outside EL3 should trap. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 2 ++ target/arm/helper.c | 4 ++-- target/arm/tcg/cpu64.c | 46 +++++++++++++++++++++++++++++++++--------- 3 files changed, 41 insertions(+), 11 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +CPAccessResult access_tvm_trvm(CPUARMState *, const ARMCPRegInfo *, bool); + #endif /* TARGET_ARM_CPREGS_H */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, } /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ -static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) +CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) { if (arm_current_el(env) == 1) { uint64_t trap = isread ? HCR_TRVM : HCR_TVM; diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a64fx_initfn(Object *obj) /* TODO: Add A64FX specific HPC extension registers */ } +static CPAccessResult access_actlr_w(CPUARMState *env, const ARMCPRegInfo *r, + bool read) +{ + if (!read) { + int el = arm_current_el(env); + + /* Because ACTLR_EL2 is constant 0, writes below EL2 trap to EL2. */ + if (el < 2 && arm_is_el2_enabled(env)) { + return CP_ACCESS_TRAP_EL2; + } + /* Because ACTLR_EL3 is constant 0, writes below EL3 trap to EL3. */ + if (el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + return CP_ACCESS_TRAP_EL3; + } + } + return CP_ACCESS_OK; +} + static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { { .name = "ATCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 7, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + /* Traps and enables are the same as for TCR_EL1. */ + .accessfn = access_tvm_trvm, .fgt = FGT_TCR_EL1, }, { .name = "ATCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 15, .crm = 7, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR3_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, /* * Report CPUCFR_EL1.SCU as 1, as we do not implement the DSU * (and in particular its system registers). @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 4 }, { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 4, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010, + .accessfn = access_actlr_w }, { .name = "CPUPCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 8, .opc2 = 1, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUPWRCTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCDN_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCTL_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGF_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, }; static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> There is only one additional EL1 register modeled, which also needs to use access_actlr_w. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) static const ARMCPRegInfo neoverse_v1_cp_reginfo[] = { { .name = "CPUECTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 5, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUPPMCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 2, .opc2 = 0, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing external to the cpu, which is out of scope for QEMU. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* FEAT_SPE (Statistical Profiling Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, PMSVER, 0); + /* FEAT_TRBE (Trace Buffer Extension) */ + cpu->isar.id_aa64dfr0 = + FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEBUFFER, 0); /* FEAT_TRF (Self-hosted Trace Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEFILT, 0); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This feature allows the operating system to set TCR_ELx.HWU* to allow the implementation to use the PBHA bits from the block and page descriptors for for IMPLEMENTATION DEFINED purposes. Since QEMU has no need to use these bits, we may simply ignore them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HAFDBS (Hardware management of the access flag and dirty bit state) - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) +- FEAT_HPDS2 (Translation table page-based hardware attributes) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR1, HAFDBS, 2); /* FEAT_HAFDBS */ t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 3); /* FEAT_PAN3 */ t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> This is a mandatory feature for Armv8.1 architectures but we don't state the feature clearly in our emulation list. Also include FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org Cc: qemu-stable@nongnu.org Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org> [PMM: pluralize 'instructions' in docs] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CRC32 (CRC32 instructions) - FEAT_CSV2 (Cache speculation variant 2) - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ - t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); /* FEAT_CRC32 */ t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> i.MX7 IOMUX GPR device is not equivalent to i.MX6UL IOMUXC GPR device. In particular, register 22 is not present on i.MX6UL and this is actualy The only register that is really emulated in the i.MX7 IOMUX GPR device. Note: The i.MX6UL code is actually also implementing the IOMUX GPR device as an unimplemented device at the same bus adress and the 2 instantiations were actualy colliding. So we go back to the unimplemented device for now. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 48681bf51ee97646479bb261bee19abebbc8074e.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 -- hw/arm/fsl-imx6ul.c | 11 ----------- 2 files changed, 13 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx6ul_ccm.h" #include "hw/misc/imx6_src.h" #include "hw/misc/imx7_snvs.h" -#include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX6SRCState src; IMX7SNVSState snvs; IMXGPCv2State gpcv2; - IMX7GPRState gpr; IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); - /* - * GPR - */ - object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); - /* * GPIOs 1 to 5 */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOGn_IRQ[i])); } - /* - * GPR - */ - sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); - /* * SDMA */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for most i.MX6UL devices in i.MX6UL header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: d579043fbd4e4b490370783fda43fc02c8e9be75.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 156 +++++++++++++++++++++++++++++++----- hw/arm/fsl-imx6ul.c | 147 ++++++++++++++++++++++----------- 2 files changed, 232 insertions(+), 71 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX6UL "fsl-imx6ul" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX6ULState, FSL_IMX6UL) @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_ADCS = 2, FSL_IMX6UL_NUM_USB_PHYS = 2, FSL_IMX6UL_NUM_USBS = 2, + FSL_IMX6UL_NUM_SAIS = 3, + FSL_IMX6UL_NUM_CANS = 2, + FSL_IMX6UL_NUM_PWMS = 4, }; struct FslIMX6ULState { @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { enum FslIMX6ULMemoryMap { FSL_IMX6UL_MMDC_ADDR = 0x80000000, - FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX6UL_MMDC_SIZE = (2 * GiB), FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, - FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, - FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, - FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, - FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_MEM_SIZE = (256 * MiB), - /* AIPS-2 */ + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_ALIAS_SIZE = (128 * MiB), + + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_EIM_CS_SIZE = (128 * MiB), + + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_AES_ENCRYPT_SIZE = (1 * MiB), + + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_RX_SIZE = (32 * MiB), + + /* AIPS-2 Begin */ FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, FSL_IMX6UL_UART4_ADDR = 0x021F0000, FSL_IMX6UL_UART3_ADDR = 0x021EC000, FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_QSPI_SIZE = 0x500, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CTRL_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_CMP_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_SYS_CNT_RD_SIZE = (16 * KiB), + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_TZASC_SIZE = (16 * KiB), + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_PXP_SIZE = (16 * KiB), + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSI_SIZE = 0x100, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_CSU_SIZE = (16 * KiB), + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_OCOTP_CTRL_SIZE = (4 * KiB), + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_EIM_SIZE = 0x100, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_MMDC_CFG_SIZE = (4 * KiB), + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_ROMCP_SIZE = 0x300, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, FSL_IMX6UL_I2C2_ADDR = 0x021A4000, FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_ADCn_SIZE = 0x100, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, FSL_IMX6UL_USDHC1_ADDR = 0x02190000, - FSL_IMX6UL_SIM1_ADDR = 0x0218C000, - FSL_IMX6UL_ENET1_ADDR = 0x02188000, - FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, - FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, - FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, - FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, - FSL_IMX6UL_CAAM_ADDR = 0x02140000, - FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, - /* AIPS-1 */ + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_SIMn_SIZE = (16 * KiB), + + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB1_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_USB2_ADDR = 0x02184200, + + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_USBO2_PL301_SIZE = (16 * KiB), + + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_AIPS2_CFG_SIZE = 0x100, + + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_CAAM_SIZE = (16 * KiB), + + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + FSL_IMX6UL_A7MPCORE_DAP_SIZE = (4 * KiB), + /* AIPS-2 End */ + + /* AIPS-1 Begin */ FSL_IMX6UL_PWM8_ADDR = 0x020FC000, FSL_IMX6UL_PWM7_ADDR = 0x020F8000, FSL_IMX6UL_PWM6_ADDR = 0x020F4000, FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_SDMA_SIZE = 0x300, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_GPR_SIZE = 0x40, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_IOMUXC_SIZE = 0x700, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_USBPHY2_ADDR = 0x020CA000, - FSL_IMX6UL_USBPHY2_SIZE = (4 * 1024), FSL_IMX6UL_USBPHY1_ADDR = 0x020C9000, - FSL_IMX6UL_USBPHY1_SIZE = (4 * 1024), + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_ANALOG_SIZE = 0x300, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_KPP_SIZE = 0x10, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_SNVS_LP_SIZE = (16 * KiB), + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_CANn_SIZE = (4 * KiB), + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, FSL_IMX6UL_PWM3_ADDR = 0x02088000, FSL_IMX6UL_PWM2_ADDR = 0x02084000, FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_PWMn_SIZE = 0x20, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_AIPS1_CFG_SIZE = (16 * KiB), + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_BEE_SIZE = (16 * KiB), + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_TOUCH_CTRL_SIZE = 0x100, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_SPBA_SIZE = 0x100, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_ASRC_SIZE = 0x100, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, FSL_IMX6UL_SAI2_ADDR = 0x0202C000, FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_SAIn_SIZE = 0x200, + FSL_IMX6UL_UART8_ADDR = 0x02024000, FSL_IMX6UL_UART1_ADDR = 0x02020000, FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + FSL_IMX6UL_SPDIF_SIZE = 0x100, + /* AIPS-1 End */ + + FSL_IMX6UL_BCH_ADDR = 0x01808000, + FSL_IMX6UL_BCH_SIZE = 0x200, + + FSL_IMX6UL_GPMI_ADDR = 0x01806000, + FSL_IMX6UL_GPMI_SIZE = 0x200, FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, - FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + FSL_IMX6UL_APBH_DMA_SIZE = (4 * KiB), FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, - FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = (384 * KiB), + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, - FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_OCRAM_MEM_SIZE = (128 * KiB), + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, - FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_CAAM_MEM_SIZE = (32 * KiB), + FSL_IMX6UL_ROM_ADDR = 0x00000000, - FSL_IMX6UL_ROM_SIZE = 0x00018000, + FSL_IMX6UL_ROM_SIZE = (96 * KiB), }; enum FslIMX6ULIRQs { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * GPIOs 1 to 5 + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { snprintf(name, NAME_SIZE, "epit%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * eCSPI + * eCSPIs */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { snprintf(name, NAME_SIZE, "usbphy%d", i); object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); } + + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX6UL_A7MPCORE_DAP_SIZE); /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * GPIO + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * IOMUXC and IOMUXC_GPR + * IOMUXC */ - for (i = 0; i < 1; i++) { - static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { - FSL_IMX6UL_IOMUXC_ADDR, - FSL_IMX6UL_IOMUXC_GPR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); - } + create_unimplemented_device("iomuxc", FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_gpr", FSL_IMX6UL_IOMUXC_GPR_ADDR, + FSL_IMX6UL_IOMUXC_GPR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { FSL_IMX6UL_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENETn_TIMER_IRQ[i])); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { + static const hwaddr + FSL_IMX6UL_USB_PHYn_ADDR[FSL_IMX6UL_NUM_USB_PHYS] = { + FSL_IMX6UL_USBPHY1_ADDR, + FSL_IMX6UL_USBPHY2_ADDR, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, - FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000); + FSL_IMX6UL_USB_PHYn_ADDR[i]); } + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { + static const hwaddr FSL_IMX6UL_USB02_USBn_ADDR[FSL_IMX6UL_NUM_USBS] = { + FSL_IMX6UL_USBO2_USB1_ADDR, + FSL_IMX6UL_USBO2_USB2_ADDR, + }; + static const int FSL_IMX6UL_USBn_IRQ[] = { FSL_IMX6UL_USB1_IRQ, FSL_IMX6UL_USB2_IRQ, }; + sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, - FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200); + FSL_IMX6UL_USB02_USBn_ADDR[i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX6UL_USBn_IRQ[i])); } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { FSL_IMX6UL_WDOG1_IRQ, FSL_IMX6UL_WDOG2_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * SDMA */ - create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, + FSL_IMX6UL_SDMA_SIZE); /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000); - create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000); - create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_SAIS; i++) { + static const hwaddr FSL_IMX6UL_SAIn_ADDR[FSL_IMX6UL_NUM_SAIS] = { + FSL_IMX6UL_SAI1_ADDR, + FSL_IMX6UL_SAI2_ADDR, + FSL_IMX6UL_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX6UL_SAIn_ADDR[i], + FSL_IMX6UL_SAIn_SIZE); + } /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000); - create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000); - create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000); - create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_PWMS; i++) { + static const hwaddr FSL_IMX6UL_PWMn_ADDR[FSL_IMX6UL_NUM_PWMS] = { + FSL_IMX6UL_PWM1_ADDR, + FSL_IMX6UL_PWM2_ADDR, + FSL_IMX6UL_PWM3_ADDR, + FSL_IMX6UL_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX6UL_PWMn_ADDR[i], + FSL_IMX6UL_PWMn_SIZE); + } /* * Audio ASRC (asynchronous sample rate converter) */ - create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000); + create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, + FSL_IMX6UL_ASRC_SIZE); /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000); - create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_CANS; i++) { + static const hwaddr FSL_IMX6UL_CANn_ADDR[FSL_IMX6UL_NUM_CANS] = { + FSL_IMX6UL_CAN1_ADDR, + FSL_IMX6UL_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX6UL_CANn_ADDR[i], + FSL_IMX6UL_CANn_SIZE); + } /* * APHB_DMA @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) }; snprintf(name, NAME_SIZE, "adc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], + FSL_IMX6UL_ADCn_SIZE); } /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, + FSL_IMX6UL_LCDIF_SIZE); /* * ROM memory -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add 4 missing PWM devices Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 59e4dc56e14eccfefd379275ec19048dff9c10b3.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 +- hw/arm/fsl-imx6ul.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_USBS = 2, FSL_IMX6UL_NUM_SAIS = 3, FSL_IMX6UL_NUM_CANS = 2, - FSL_IMX6UL_NUM_PWMS = 4, + FSL_IMX6UL_NUM_PWMS = 8, }; struct FslIMX6ULState { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_PWM2_ADDR, FSL_IMX6UL_PWM3_ADDR, FSL_IMX6UL_PWM4_ADDR, + FSL_IMX6UL_PWM5_ADDR, + FSL_IMX6UL_PWM6_ADDR, + FSL_IMX6UL_PWM7_ADDR, + FSL_IMX6UL_PWM8_ADDR, }; snprintf(name, NAME_SIZE, "pwm%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, FSL_IMX6UL_LCDIF_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX6UL_CSU_ADDR, + FSL_IMX6UL_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX6UL_TZASC_ADDR, + FSL_IMX6UL_TZASC_SIZE); + /* * ROM memory */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for all i.MX7 devices in i.MX7 header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 59e195d33e4d486a8d131392acd46633c8c10ed7.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 330 ++++++++++++++++++++++++++++---------- hw/arm/fsl-imx7.c | 130 ++++++++++----- 2 files changed, 335 insertions(+), 125 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" -#include "hw/misc/imx6_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ #include "hw/usb/chipidea.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX7 "fsl-imx7" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX7State, FSL_IMX7) @@ -XXX,XX +XXX,XX @@ enum FslIMX7Configuration { FSL_IMX7_NUM_ECSPIS = 4, FSL_IMX7_NUM_USBS = 3, FSL_IMX7_NUM_ADCS = 2, + FSL_IMX7_NUM_SAIS = 3, + FSL_IMX7_NUM_CANS = 2, + FSL_IMX7_NUM_PWMS = 4, }; struct FslIMX7State { @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { enum FslIMX7MemoryMap { FSL_IMX7_MMDC_ADDR = 0x80000000, - FSL_IMX7_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX7_MMDC_SIZE = (2 * GiB), - FSL_IMX7_GPIO1_ADDR = 0x30200000, - FSL_IMX7_GPIO2_ADDR = 0x30210000, - FSL_IMX7_GPIO3_ADDR = 0x30220000, - FSL_IMX7_GPIO4_ADDR = 0x30230000, - FSL_IMX7_GPIO5_ADDR = 0x30240000, - FSL_IMX7_GPIO6_ADDR = 0x30250000, - FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX7_QSPI1_MEM_SIZE = (256 * MiB), - FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + FSL_IMX7_PCIE1_MEM_ADDR = 0x40000000, + FSL_IMX7_PCIE1_MEM_SIZE = (256 * MiB), - FSL_IMX7_WDOG1_ADDR = 0x30280000, - FSL_IMX7_WDOG2_ADDR = 0x30290000, - FSL_IMX7_WDOG3_ADDR = 0x302A0000, - FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_QSPI1_RX_BUF_ADDR = 0x34000000, + FSL_IMX7_QSPI1_RX_BUF_SIZE = (32 * MiB), - FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + /* PCIe Peripherals */ + FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_GPT1_ADDR = 0x302D0000, - FSL_IMX7_GPT2_ADDR = 0x302E0000, - FSL_IMX7_GPT3_ADDR = 0x302F0000, - FSL_IMX7_GPT4_ADDR = 0x30300000, + /* MMAP Peripherals */ + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x8000, - FSL_IMX7_IOMUXC_ADDR = 0x30330000, - FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, - FSL_IMX7_IOMUXCn_SIZE = 0x1000, + /* GPV configuration */ + FSL_IMX7_GPV6_ADDR = 0x32600000, + FSL_IMX7_GPV5_ADDR = 0x32500000, + FSL_IMX7_GPV4_ADDR = 0x32400000, + FSL_IMX7_GPV3_ADDR = 0x32300000, + FSL_IMX7_GPV2_ADDR = 0x32200000, + FSL_IMX7_GPV1_ADDR = 0x32100000, + FSL_IMX7_GPV0_ADDR = 0x32000000, + FSL_IMX7_GPVn_SIZE = (1 * MiB), - FSL_IMX7_OCOTP_ADDR = 0x30350000, - FSL_IMX7_OCOTP_SIZE = 0x10000, + /* Arm Peripherals */ + FSL_IMX7_A7MPCORE_ADDR = 0x31000000, - FSL_IMX7_ANALOG_ADDR = 0x30360000, - FSL_IMX7_SNVS_ADDR = 0x30370000, - FSL_IMX7_CCM_ADDR = 0x30380000, + /* AIPS-3 Begin */ - FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = 0x1000, + FSL_IMX7_ENET2_ADDR = 0x30BF0000, + FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ADC1_ADDR = 0x30610000, - FSL_IMX7_ADC2_ADDR = 0x30620000, - FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_SDMA_ADDR = 0x30BD0000, + FSL_IMX7_SDMA_SIZE = (4 * KiB), - FSL_IMX7_PWM1_ADDR = 0x30660000, - FSL_IMX7_PWM2_ADDR = 0x30670000, - FSL_IMX7_PWM3_ADDR = 0x30680000, - FSL_IMX7_PWM4_ADDR = 0x30690000, - FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_EIM_ADDR = 0x30BC0000, + FSL_IMX7_EIM_SIZE = (4 * KiB), - FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, - FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_QSPI_ADDR = 0x30BB0000, + FSL_IMX7_QSPI_SIZE = 0x8000, - FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_SIM2_ADDR = 0x30BA0000, + FSL_IMX7_SIM1_ADDR = 0x30B90000, + FSL_IMX7_SIMn_SIZE = (4 * KiB), + + FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_USDHC2_ADDR = 0x30B50000, + FSL_IMX7_USDHC1_ADDR = 0x30B40000, + + FSL_IMX7_USB3_ADDR = 0x30B30000, + FSL_IMX7_USBMISC3_ADDR = 0x30B30200, + FSL_IMX7_USB2_ADDR = 0x30B20000, + FSL_IMX7_USBMISC2_ADDR = 0x30B20200, + FSL_IMX7_USB1_ADDR = 0x30B10000, + FSL_IMX7_USBMISC1_ADDR = 0x30B10200, + FSL_IMX7_USBMISCn_SIZE = 0x200, + + FSL_IMX7_USB_PL301_ADDR = 0x30AD0000, + FSL_IMX7_USB_PL301_SIZE = (64 * KiB), + + FSL_IMX7_SEMAPHORE_HS_ADDR = 0x30AC0000, + FSL_IMX7_SEMAPHORE_HS_SIZE = (64 * KiB), + + FSL_IMX7_MUB_ADDR = 0x30AB0000, + FSL_IMX7_MUA_ADDR = 0x30AA0000, + FSL_IMX7_MUn_SIZE = (KiB), + + FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART6_ADDR = 0x30A80000, + FSL_IMX7_UART5_ADDR = 0x30A70000, + FSL_IMX7_UART4_ADDR = 0x30A60000, + + FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_I2C3_ADDR = 0x30A40000, + FSL_IMX7_I2C2_ADDR = 0x30A30000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, + + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CANn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS3_CONF_ADDR = 0x309F0000, + FSL_IMX7_AIPS3_CONF_SIZE = (64 * KiB), FSL_IMX7_CAAM_ADDR = 0x30900000, - FSL_IMX7_CAAM_SIZE = 0x40000, + FSL_IMX7_CAAM_SIZE = (256 * KiB), - FSL_IMX7_CAN1_ADDR = 0x30A00000, - FSL_IMX7_CAN2_ADDR = 0x30A10000, - FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_SPBA_ADDR = 0x308F0000, + FSL_IMX7_SPBA_SIZE = (4 * KiB), - FSL_IMX7_I2C1_ADDR = 0x30A20000, - FSL_IMX7_I2C2_ADDR = 0x30A30000, - FSL_IMX7_I2C3_ADDR = 0x30A40000, - FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_SAI3_ADDR = 0x308C0000, + FSL_IMX7_SAI2_ADDR = 0x308B0000, + FSL_IMX7_SAI1_ADDR = 0x308A0000, + FSL_IMX7_SAIn_SIZE = (4 * KiB), - FSL_IMX7_ECSPI1_ADDR = 0x30820000, - FSL_IMX7_ECSPI2_ADDR = 0x30830000, - FSL_IMX7_ECSPI3_ADDR = 0x30840000, - FSL_IMX7_ECSPI4_ADDR = 0x30630000, - - FSL_IMX7_LCDIF_ADDR = 0x30730000, - FSL_IMX7_LCDIF_SIZE = 0x1000, - - FSL_IMX7_UART1_ADDR = 0x30860000, + FSL_IMX7_UART3_ADDR = 0x30880000, /* * Some versions of the reference manual claim that UART2 is @ * 0x30870000, but experiments with HW + DT files in upstream @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { * actually located @ 0x30890000 */ FSL_IMX7_UART2_ADDR = 0x30890000, - FSL_IMX7_UART3_ADDR = 0x30880000, - FSL_IMX7_UART4_ADDR = 0x30A60000, - FSL_IMX7_UART5_ADDR = 0x30A70000, - FSL_IMX7_UART6_ADDR = 0x30A80000, - FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART1_ADDR = 0x30860000, - FSL_IMX7_SAI1_ADDR = 0x308A0000, - FSL_IMX7_SAI2_ADDR = 0x308B0000, - FSL_IMX7_SAI3_ADDR = 0x308C0000, - FSL_IMX7_SAIn_SIZE = 0x10000, + FSL_IMX7_ECSPI3_ADDR = 0x30840000, + FSL_IMX7_ECSPI2_ADDR = 0x30830000, + FSL_IMX7_ECSPI1_ADDR = 0x30820000, + FSL_IMX7_ECSPIn_SIZE = (4 * KiB), - FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ENET2_ADDR = 0x30BF0000, + /* AIPS-3 End */ - FSL_IMX7_USB1_ADDR = 0x30B10000, - FSL_IMX7_USBMISC1_ADDR = 0x30B10200, - FSL_IMX7_USB2_ADDR = 0x30B20000, - FSL_IMX7_USBMISC2_ADDR = 0x30B20200, - FSL_IMX7_USB3_ADDR = 0x30B30000, - FSL_IMX7_USBMISC3_ADDR = 0x30B30200, - FSL_IMX7_USBMISCn_SIZE = 0x200, + /* AIPS-2 Begin */ - FSL_IMX7_USDHC1_ADDR = 0x30B40000, - FSL_IMX7_USDHC2_ADDR = 0x30B50000, - FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_AXI_DEBUG_MON_ADDR = 0x307E0000, + FSL_IMX7_AXI_DEBUG_MON_SIZE = (64 * KiB), - FSL_IMX7_SDMA_ADDR = 0x30BD0000, - FSL_IMX7_SDMA_SIZE = 0x1000, + FSL_IMX7_PERFMON2_ADDR = 0x307D0000, + FSL_IMX7_PERFMON1_ADDR = 0x307C0000, + FSL_IMX7_PERFMONn_SIZE = (64 * KiB), + + FSL_IMX7_DDRC_ADDR = 0x307A0000, + FSL_IMX7_DDRC_SIZE = (4 * KiB), + + FSL_IMX7_DDRC_PHY_ADDR = 0x30790000, + FSL_IMX7_DDRC_PHY_SIZE = (4 * KiB), + + FSL_IMX7_TZASC_ADDR = 0x30780000, + FSL_IMX7_TZASC_SIZE = (64 * KiB), + + FSL_IMX7_MIPI_DSI_ADDR = 0x30760000, + FSL_IMX7_MIPI_DSI_SIZE = (4 * KiB), + + FSL_IMX7_MIPI_CSI_ADDR = 0x30750000, + FSL_IMX7_MIPI_CSI_SIZE = 0x4000, + + FSL_IMX7_LCDIF_ADDR = 0x30730000, + FSL_IMX7_LCDIF_SIZE = 0x8000, + + FSL_IMX7_CSI_ADDR = 0x30710000, + FSL_IMX7_CSI_SIZE = (4 * KiB), + + FSL_IMX7_PXP_ADDR = 0x30700000, + FSL_IMX7_PXP_SIZE = 0x4000, + + FSL_IMX7_EPDC_ADDR = 0x306F0000, + FSL_IMX7_EPDC_SIZE = (4 * KiB), + + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = (4 * KiB), + + FSL_IMX7_SYSCNT_CTRL_ADDR = 0x306C0000, + FSL_IMX7_SYSCNT_CMP_ADDR = 0x306B0000, + FSL_IMX7_SYSCNT_RD_ADDR = 0x306A0000, + + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWMn_SIZE = (4 * KiB), + + FSL_IMX7_FlEXTIMER2_ADDR = 0x30650000, + FSL_IMX7_FlEXTIMER1_ADDR = 0x30640000, + FSL_IMX7_FLEXTIMERn_SIZE = (4 * KiB), + + FSL_IMX7_ECSPI4_ADDR = 0x30630000, + + FSL_IMX7_ADC2_ADDR = 0x30620000, + FSL_IMX7_ADC1_ADDR = 0x30610000, + FSL_IMX7_ADCn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS2_CONF_ADDR = 0x305F0000, + FSL_IMX7_AIPS2_CONF_SIZE = (64 * KiB), + + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + + FSL_IMX7_CSU_ADDR = 0x303E0000, + FSL_IMX7_CSU_SIZE = (64 * KiB), + + FSL_IMX7_RDC_ADDR = 0x303D0000, + FSL_IMX7_RDC_SIZE = (4 * KiB), + + FSL_IMX7_SEMAPHORE2_ADDR = 0x303C0000, + FSL_IMX7_SEMAPHORE1_ADDR = 0x303B0000, + FSL_IMX7_SEMAPHOREn_SIZE = (4 * KiB), + + FSL_IMX7_GPC_ADDR = 0x303A0000, + + FSL_IMX7_SRC_ADDR = 0x30390000, + FSL_IMX7_SRC_SIZE = (4 * KiB), + + FSL_IMX7_CCM_ADDR = 0x30380000, + + FSL_IMX7_SNVS_HP_ADDR = 0x30370000, + + FSL_IMX7_ANALOG_ADDR = 0x30360000, + + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + + FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, + FSL_IMX7_IOMUXC_GPR_SIZE = (4 * KiB), + + FSL_IMX7_IOMUXC_ADDR = 0x30330000, + FSL_IMX7_IOMUXC_SIZE = (4 * KiB), + + FSL_IMX7_KPP_ADDR = 0x30320000, + FSL_IMX7_KPP_SIZE = (4 * KiB), + + FSL_IMX7_ROMCP_ADDR = 0x30310000, + FSL_IMX7_ROMCP_SIZE = (4 * KiB), + + FSL_IMX7_GPT4_ADDR = 0x30300000, + FSL_IMX7_GPT3_ADDR = 0x302F0000, + FSL_IMX7_GPT2_ADDR = 0x302E0000, + FSL_IMX7_GPT1_ADDR = 0x302D0000, + + FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + FSL_IMX7_IOMUXC_LPSR_SIZE = (4 * KiB), + + FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_WDOG3_ADDR = 0x302A0000, + FSL_IMX7_WDOG2_ADDR = 0x30290000, + FSL_IMX7_WDOG1_ADDR = 0x30280000, + + FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + + FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_GPIO6_ADDR = 0x30250000, + FSL_IMX7_GPIO5_ADDR = 0x30240000, + FSL_IMX7_GPIO4_ADDR = 0x30230000, + FSL_IMX7_GPIO3_ADDR = 0x30220000, + FSL_IMX7_GPIO2_ADDR = 0x30210000, + FSL_IMX7_GPIO1_ADDR = 0x30200000, + + FSL_IMX7_AIPS1_CONF_ADDR = 0x301F0000, + FSL_IMX7_AIPS1_CONF_SIZE = (64 * KiB), - FSL_IMX7_A7MPCORE_ADDR = 0x31000000, FSL_IMX7_A7MPCORE_DAP_ADDR = 0x30000000, + FSL_IMX7_A7MPCORE_DAP_SIZE = (1 * MiB), - FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, + /* AIPS-1 End */ - FSL_IMX7_GPR_ADDR = 0x30340000, + FSL_IMX7_EIM_CS0_ADDR = 0x28000000, + FSL_IMX7_EIM_CS0_SIZE = (128 * MiB), - FSL_IMX7_DMA_APBH_ADDR = 0x33000000, - FSL_IMX7_DMA_APBH_SIZE = 0x2000, + FSL_IMX7_OCRAM_PXP_ADDR = 0x00940000, + FSL_IMX7_OCRAM_PXP_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_EPDC_ADDR = 0x00920000, + FSL_IMX7_OCRAM_EPDC_SIZE = (128 * KiB), + + FSL_IMX7_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX7_OCRAM_MEM_SIZE = (128 * KiB), + + FSL_IMX7_TCMU_ADDR = 0x00800000, + FSL_IMX7_TCMU_SIZE = (32 * KiB), + + FSL_IMX7_TCML_ADDR = 0x007F8000, + FSL_IMX7_TCML_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_S_ADDR = 0x00180000, + FSL_IMX7_OCRAM_S_SIZE = (32 * KiB), + + FSL_IMX7_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX7_CAAM_MEM_SIZE = (32 * KiB), + + FSL_IMX7_ROM_ADDR = 0x00000000, + FSL_IMX7_ROM_SIZE = (96 * KiB), }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) char name[NAME_SIZE]; int i; + /* + * CPUs + */ for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX7_NUM_CPUS); i++) { snprintf(name, NAME_SIZE, "cpu%d", i); object_initialize_child(obj, name, &s->cpu[i], @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) TYPE_A15MPCORE_PRIV); /* - * GPIOs 1 to 7 + * GPIOs */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } - + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); + /* + * PCIE + */ object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) return; } + /* + * CPUs + */ for (i = 0; i < smp_cpus; i++) { o = OBJECT(&s->cpu[i]); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX7_A7MPCORE_DAP_SIZE); /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPTn_IRQ[i])); } + /* + * GPIOs + */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = { FSL_IMX7_GPIO1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * IOMUXC and IOMUXC_LPSR */ - for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) { - static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = { - FSL_IMX7_IOMUXC_ADDR, - FSL_IMX7_IOMUXC_LPSR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i], - FSL_IMX7_IOMUXCn_SIZE); - } + create_unimplemented_device("iomuxc", FSL_IMX7_IOMUXC_ADDR, + FSL_IMX7_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_lspr", FSL_IMX7_IOMUXC_LPSR_ADDR, + FSL_IMX7_IOMUXC_LPSR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = { FSL_IMX7_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_SPIn_IRQ[i])); } + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = { FSL_IMX7_I2C1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * SNVS */ sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_HP_ADDR); /* * SRC @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_PWMS; i++) { + static const hwaddr FSL_IMX7_PWMn_ADDR[FSL_IMX7_NUM_PWMS] = { + FSL_IMX7_PWM1_ADDR, + FSL_IMX7_PWM2_ADDR, + FSL_IMX7_PWM3_ADDR, + FSL_IMX7_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX7_PWMn_ADDR[i], + FSL_IMX7_PWMn_SIZE); + } /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); - create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_CANS; i++) { + static const hwaddr FSL_IMX7_CANn_ADDR[FSL_IMX7_NUM_CANS] = { + FSL_IMX7_CAN1_ADDR, + FSL_IMX7_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX7_CANn_ADDR[i], + FSL_IMX7_CANn_SIZE); + } /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX7_SAI1_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI2_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI3_ADDR, FSL_IMX7_SAIn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_SAIS; i++) { + static const hwaddr FSL_IMX7_SAIn_ADDR[FSL_IMX7_NUM_SAIS] = { + FSL_IMX7_SAI1_ADDR, + FSL_IMX7_SAI2_ADDR, + FSL_IMX7_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX7_SAIn_ADDR[i], + FSL_IMX7_SAIn_SIZE); + } /* * OCOTP @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, FSL_IMX7_OCOTP_SIZE); + /* + * GPR + */ sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_IOMUXC_GPR_ADDR); + /* + * PCIE + */ sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ); sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq); - + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = { FSL_IMX7_USBMISC1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add various memory segments - OCRAM - OCRAM EPDC - OCRAM PXP - OCRAM S - ROM - CAAM Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: f887a3483996ba06d40bd62ffdfb0ecf68621987.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 7 +++++ hw/arm/fsl-imx7.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7GPRState gpr; ChipideaState usb[FSL_IMX7_NUM_USBS]; DesignwarePCIEHost pcie; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_epdc; + MemoryRegion ocram_pxp; + MemoryRegion ocram_s; + uint32_t phy_num[FSL_IMX7_NUM_ETHS]; bool phy_connected[FSL_IMX7_NUM_ETHS]; }; diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX7_CSU_ADDR, + FSL_IMX7_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX7_TZASC_ADDR, + FSL_IMX7_TZASC_SIZE); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx7.ocram", + FSL_IMX7_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * OCRAM EPDC memory + */ + memory_region_init_ram(&s->ocram_epdc, NULL, "imx7.ocram_epdc", + FSL_IMX7_OCRAM_EPDC_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_EPDC_ADDR, + &s->ocram_epdc); + + /* + * OCRAM PXP memory + */ + memory_region_init_ram(&s->ocram_pxp, NULL, "imx7.ocram_pxp", + FSL_IMX7_OCRAM_PXP_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_PXP_ADDR, + &s->ocram_pxp); + + /* + * OCRAM_S memory + */ + memory_region_init_ram(&s->ocram_s, NULL, "imx7.ocram_s", + FSL_IMX7_OCRAM_S_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_S_ADDR, + &s->ocram_s); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, OBJECT(dev), "imx7.rom", + FSL_IMX7_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, OBJECT(dev), "imx7.caam", + FSL_IMX7_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_CAAM_MEM_ADDR, + &s->caam); } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The SRC device is normally used to start the secondary CPU. When running Linux directly, QEMU is emulating a PSCI interface that UBOOT is installing at boot time and therefore the fact that the SRC device is unimplemented is hidden as Qemu respond directly to PSCI requets without using the SRC device. But if you try to run a more bare metal application (maybe uboot itself), then it is not possible to start the secondary CPU as the SRC is an unimplemented device. This patch adds the ability to start the secondary CPU through the SRC device so that you can use this feature in bare metal applications. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +- include/hw/misc/imx7_src.h | 66 +++++++++ hw/arm/fsl-imx7.c | 8 +- hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 6 files changed, 356 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" +#include "hw/misc/imx7_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7CCMState ccm; IMX7AnalogState analog; IMX7SNVSState snvs; + IMX7SRCState src; IMXGPCv2State gpcv2; IMXSPIState spi[FSL_IMX7_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX7_NUM_I2CS]; @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = (4 * KiB), FSL_IMX7_CCM_ADDR = 0x30380000, diff --git a/include/hw/misc/imx7_src.h b/include/hw/misc/imx7_src.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_src.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (C) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SRC_H +#define IMX7_SRC_H + +#include "hw/sysbus.h" +#include "qemu/bitops.h" +#include "qom/object.h" + +#define SRC_SCR 0 +#define SRC_A7RCR0 1 +#define SRC_A7RCR1 2 +#define SRC_M4RCR 3 +#define SRC_ERCR 5 +#define SRC_HSICPHY_RCR 7 +#define SRC_USBOPHY1_RCR 8 +#define SRC_USBOPHY2_RCR 9 +#define SRC_MPIPHY_RCR 10 +#define SRC_PCIEPHY_RCR 11 +#define SRC_SBMR1 22 +#define SRC_SRSR 23 +#define SRC_SISR 26 +#define SRC_SIMR 27 +#define SRC_SBMR2 28 +#define SRC_GPR1 29 +#define SRC_GPR2 30 +#define SRC_GPR3 31 +#define SRC_GPR4 32 +#define SRC_GPR5 33 +#define SRC_GPR6 34 +#define SRC_GPR7 35 +#define SRC_GPR8 36 +#define SRC_GPR9 37 +#define SRC_GPR10 38 +#define SRC_MAX 39 + +/* SRC_A7SCR1 */ +#define R_CORE1_ENABLE_SHIFT 1 +#define R_CORE1_ENABLE_LENGTH 1 +/* SRC_A7SCR0 */ +#define R_CORE1_RST_SHIFT 5 +#define R_CORE1_RST_LENGTH 1 +#define R_CORE0_RST_SHIFT 4 +#define R_CORE0_RST_LENGTH 1 + +#define TYPE_IMX7_SRC "imx7.src" +OBJECT_DECLARE_SIMPLE_TYPE(IMX7SRCState, IMX7_SRC) + +struct IMX7SRCState { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t regs[SRC_MAX]; +}; + +#endif /* IMX7_SRC_H */ diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * SRC + */ + object_initialize_child(obj, "src", &s->src, TYPE_IMX7_SRC); + /* * ECSPIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * SRC */ - create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX7_SRC_ADDR); /* * Watchdogs diff --git a/hw/misc/imx7_src.c b/hw/misc/imx7_src.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_src.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_src.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" +#include "qemu/module.h" +#include "target/arm/arm-powerctl.h" +#include "hw/core/cpu.h" +#include "hw/registerfields.h" + +#include "trace.h" + +static const char *imx7_src_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case SRC_SCR: + return "SRC_SCR"; + case SRC_A7RCR0: + return "SRC_A7RCR0"; + case SRC_A7RCR1: + return "SRC_A7RCR1"; + case SRC_M4RCR: + return "SRC_M4RCR"; + case SRC_ERCR: + return "SRC_ERCR"; + case SRC_HSICPHY_RCR: + return "SRC_HSICPHY_RCR"; + case SRC_USBOPHY1_RCR: + return "SRC_USBOPHY1_RCR"; + case SRC_USBOPHY2_RCR: + return "SRC_USBOPHY2_RCR"; + case SRC_PCIEPHY_RCR: + return "SRC_PCIEPHY_RCR"; + case SRC_SBMR1: + return "SRC_SBMR1"; + case SRC_SRSR: + return "SRC_SRSR"; + case SRC_SISR: + return "SRC_SISR"; + case SRC_SIMR: + return "SRC_SIMR"; + case SRC_SBMR2: + return "SRC_SBMR2"; + case SRC_GPR1: + return "SRC_GPR1"; + case SRC_GPR2: + return "SRC_GPR2"; + case SRC_GPR3: + return "SRC_GPR3"; + case SRC_GPR4: + return "SRC_GPR4"; + case SRC_GPR5: + return "SRC_GPR5"; + case SRC_GPR6: + return "SRC_GPR6"; + case SRC_GPR7: + return "SRC_GPR7"; + case SRC_GPR8: + return "SRC_GPR8"; + case SRC_GPR9: + return "SRC_GPR9"; + case SRC_GPR10: + return "SRC_GPR10"; + default: + sprintf(unknown, "%u ?", reg); + return unknown; + } +} + +static const VMStateDescription vmstate_imx7_src = { + .name = TYPE_IMX7_SRC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_src_reset(DeviceState *dev) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + /* Set reset values */ + s->regs[SRC_SCR] = 0xA0; + s->regs[SRC_SRSR] = 0x1; + s->regs[SRC_SIMR] = 0x1F; +} + +static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + + if (index < SRC_MAX) { + value = s->regs[index]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + } + + trace_imx7_src_read(imx7_src_reg_name(index), value); + + return value; +} + + +/* + * The reset is asynchronous so we need to defer clearing the reset + * bit until the work is completed. + */ + +struct SRCSCRResetInfo { + IMX7SRCState *s; + uint32_t reset_bit; +}; + +static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) +{ + struct SRCSCRResetInfo *ri = data.host_ptr; + IMX7SRCState *s = ri->s; + + assert(qemu_mutex_iothread_locked()); + + s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + g_free(ri); +} + +static void imx7_defer_clear_reset_bit(uint32_t cpuid, + IMX7SRCState *s, + uint32_t reset_shift) +{ + struct SRCSCRResetInfo *ri; + CPUState *cpu = arm_get_cpu_by_id(cpuid); + + if (!cpu) { + return; + } + + ri = g_new(struct SRCSCRResetInfo, 1); + ri->s = s; + ri->reset_bit = reset_shift; + + async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); +} + + +static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + long unsigned int change_mask; + uint32_t current_value = value; + + if (index >= SRC_MAX) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + return; + } + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + change_mask = s->regs[index] ^ (uint32_t)current_value; + + switch (index) { + case SRC_A7RCR0: + if (FIELD_EX32(change_mask, CORE0, RST)) { + arm_reset_cpu(0); + imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); + } + if (FIELD_EX32(change_mask, CORE1, RST)) { + arm_reset_cpu(1); + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + } + s->regs[index] = current_value; + break; + case SRC_A7RCR1: + /* + * On real hardware when the system reset controller starts a + * secondary CPU it runs through some boot ROM code which reads + * the SRC_GPRX registers controlling the start address and branches + * to it. + * Here we are taking a short cut and branching directly to the + * requested address (we don't want to run the boot ROM code inside + * QEMU) + */ + if (FIELD_EX32(change_mask, CORE1, ENABLE)) { + if (FIELD_EX32(current_value, CORE1, ENABLE)) { + /* CORE 1 is brought up */ + arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], + 3, false); + } else { + /* CORE 1 is shut down */ + arm_set_cpu_off(1); + } + /* We clear the reset bits as the processor changed state */ + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + clear_bit(R_CORE1_RST_SHIFT, &change_mask); + } + s->regs[index] = current_value; + break; + default: + s->regs[index] = current_value; + break; + } +} + +static const struct MemoryRegionOps imx7_src_ops = { + .read = imx7_src_read, + .write = imx7_src_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_src_realize(DeviceState *dev, Error **errp) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, + TYPE_IMX7_SRC, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); +} + +static void imx7_src_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx7_src_realize; + dc->reset = imx7_src_reset; + dc->vmsd = &vmstate_imx7_src; + dc->desc = "i.MX6 System Reset Controller"; +} + +static const TypeInfo imx7_src_info = { + .name = TYPE_IMX7_SRC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SRCState), + .class_init = imx7_src_class_init, +}; + +static void imx7_src_register_types(void) +{ + type_register_static(&imx7_src_info); +} + +type_init(imx7_src_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( 'imx6_src.c', 'imx6ul_ccm.c', 'imx7_ccm.c', + 'imx7_src.c', 'imx7_gpr.c', 'imx7_snvs.c', 'imx_ccm.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d" ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +# imx7_src.c +imx7_src_read(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +imx7_src_write(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 + # iotkit-sysinfo.c iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.34.1 The architecture requires (R_TYTWB) that an attempt to return from EL3 when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This enforces that the CPU can't ever be executing below EL3 with the NSE,NS bits indicating an invalid security state.) We were missing this check; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230807150618.101357-1-peter.maydell@linaro.org --- target/arm/tcg/helper-a64.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) spsr &= ~PSTATE_SS; } + /* + * FEAT_RME forbids return from EL3 with an invalid security state. + * We don't need an explicit check for FEAT_RME here because we enforce + * in scr_write() that you can't set the NSE bit without it. + */ + if (cur_el == 3 && (env->cp15.scr_el3 & (SCR_NS | SCR_NSE)) == SCR_NSE) { + goto illegal_return; + } + new_el = el_from_spsr(spsr); if (new_el == -1) { goto illegal_return; -- 2.34.1 In the m48t59 device we almost always use 64-bit arithmetic when dealing with time_t deltas. The one exception is in set_alarm(), which currently uses a plain 'int' to hold the difference between two time_t values. Switch to int64_t instead to avoid any possible overflow issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/m48t59.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/rtc/m48t59.c b/hw/rtc/m48t59.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/m48t59.c +++ b/hw/rtc/m48t59.c @@ -XXX,XX +XXX,XX @@ static void alarm_cb (void *opaque) static void set_alarm(M48t59State *NVRAM) { - int diff; + int64_t diff; if (NVRAM->alrm_timer != NULL) { timer_del(NVRAM->alrm_timer); diff = qemu_timedate_diff(&NVRAM->alarm) - NVRAM->time_offset; -- 2.34.1 In the twl92230 device, use int64_t for the two state fields sec_offset and alm_sec, because we set these to values that are either time_t or differences between two time_t values. These fields aren't saved in vmstate anywhere, so we can safely widen them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/twl92230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/rtc/twl92230.c b/hw/rtc/twl92230.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/twl92230.c +++ b/hw/rtc/twl92230.c @@ -XXX,XX +XXX,XX @@ struct MenelausState { struct tm tm; struct tm new; struct tm alm; - int sec_offset; - int alm_sec; + int64_t sec_offset; + int64_t alm_sec; int next_comp; } rtc; uint16_t rtc_next_vmstate; -- 2.34.1 In the aspeed_rtc device we store a difference between two time_t values in an 'int'. This is not really correct when time_t could be 64 bits. Enlarge the field to 'int64_t'. This is a migration compatibility break for the aspeed boards. While we are changing the vmstate, remove the accidental duplicate of the offset field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> --- include/hw/rtc/aspeed_rtc.h | 2 +- hw/rtc/aspeed_rtc.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/hw/rtc/aspeed_rtc.h b/include/hw/rtc/aspeed_rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/rtc/aspeed_rtc.h +++ b/include/hw/rtc/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ struct AspeedRtcState { qemu_irq irq; uint32_t reg[0x18]; - int offset; + int64_t offset; }; diff --git a/hw/rtc/aspeed_rtc.c b/hw/rtc/aspeed_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/aspeed_rtc.c +++ b/hw/rtc/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_rtc_ops = { static const VMStateDescription vmstate_aspeed_rtc = { .name = TYPE_ASPEED_RTC, - .version_id = 1, + .version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), - VMSTATE_INT32(offset, AspeedRtcState), - VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT64(offset, AspeedRtcState), VMSTATE_END_OF_LIST() } }; -- 2.34.1 The functions qemu_get_timedate() and qemu_timedate_diff() take and return a time offset as an integer. Coverity points out that means that when an RTC device implementation holds an offset as a time_t, as the m48t59 does, the time_t will get truncated. (CID 1507157, 1517772). The functions work with time_t internally, so make them use that type in their APIs. Note that this won't help any Y2038 issues where either the device model itself is keeping the offset in a 32-bit integer, or where the hardware under emulation has Y2038 or other rollover problems. If we missed any cases of the former then hopefully Coverity will warn us about them since after this patch we'd be truncating a time_t in assignments from qemu_timedate_diff().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- include/sysemu/rtc.h | 4 ++-- softmmu/rtc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sysemu/rtc.h b/include/sysemu/rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/rtc.h +++ b/include/sysemu/rtc.h @@ -XXX,XX +XXX,XX @@ * The behaviour of the clock whose value this function returns will * depend on the -rtc command line option passed by the user. */ -void qemu_get_timedate(struct tm *tm, int offset); +void qemu_get_timedate(struct tm *tm, time_t offset); /** * qemu_timedate_diff: Return difference between a struct tm and the RTC @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset); * a timestamp one hour further ahead than the current RTC time * then this function will return 3600. */ -int qemu_timedate_diff(struct tm *tm); +time_t qemu_timedate_diff(struct tm *tm); #endif diff --git a/softmmu/rtc.c b/softmmu/rtc.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/rtc.c +++ b/softmmu/rtc.c @@ -XXX,XX +XXX,XX @@ static time_t qemu_ref_timedate(QEMUClockType clock) return value; } -void qemu_get_timedate(struct tm *tm, int offset) +void qemu_get_timedate(struct tm *tm, time_t offset) { time_t ti = qemu_ref_timedate(rtc_clock); @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset) } } -int qemu_timedate_diff(struct tm *tm) +time_t qemu_timedate_diff(struct tm *tm) { time_t seconds; -- 2.34.1 Where architecturally one ARM_FEATURE_X flag implies another ARM_FEATURE_Y, we allow the CPU init function to only set X, and then set Y for it. Currently we do this in two places -- we set a few flags in arm_cpu_post_init() because we need them to decide which properties to create on the CPU object, and then we do the rest in arm_cpu_realizefn(). However, this is fragile, because it's easy to add a new property and not notice that this means that an X-implies-Y check now has to move from realize to post-init. As a specific example, the pmsav7-dregion property is conditional on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and rely on V8-implies-V7, which doesn't happen until the realizefn. Move all of these X-implies-Y checks into a new function, which we call at the top of arm_cpu_post_init(), so the feature bits are available at that point. This does now give us the reverse issue, that if there's a feature bit which is enabled or disabled by the setting of a property then then X-implies-Y features that are dependent on that property need to be in realize, not in this new function. But the only one of those is the "EL3 implies VBAR" which is already in the right place, so putting things this way round seems better to me. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org --- target/arm/cpu.c | 179 +++++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 82 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ unsigned int gt_cntfrq_period_ns(ARMCPU *cpu) NANOSECONDS_PER_SECOND / cpu->gt_cntfrq_hz : 1; } +static void arm_cpu_propagate_feature_implications(ARMCPU *cpu) +{ + CPUARMState *env = &cpu->env; + bool no_aa32 = false; + + /* + * Some features automatically imply others: set the feature + * bits explicitly for these cases. + */ + + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_PMSA); + } + + if (arm_feature(env, ARM_FEATURE_V8)) { + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V7); + } else { + set_feature(env, ARM_FEATURE_V7VE); + } + } + + /* + * There exist AArch64 cpus without AArch32 support. When KVM + * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. + * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. + * As a general principle, we also do not make ID register + * consistency checks anywhere unless using TCG, because only + * for TCG would a consistency-check failure be a QEMU bug. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); + } + + if (arm_feature(env, ARM_FEATURE_V7VE)) { + /* + * v7 Virtualization Extensions. In real hardware this implies + * EL2 and also the presence of the Security Extensions. + * For QEMU, for backwards-compatibility we implement some + * CPUs or CPU configs which have no actual EL2 or EL3 but do + * include the various other features that V7VE implies. + * Presence of EL2 itself is ARM_FEATURE_EL2, and of the + * Security Extensions is ARM_FEATURE_EL3. + */ + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_arm_div, cpu)); + set_feature(env, ARM_FEATURE_LPAE); + set_feature(env, ARM_FEATURE_V7); + } + if (arm_feature(env, ARM_FEATURE_V7)) { + set_feature(env, ARM_FEATURE_VAPA); + set_feature(env, ARM_FEATURE_THUMB2); + set_feature(env, ARM_FEATURE_MPIDR); + if (!arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V6K); + } else { + set_feature(env, ARM_FEATURE_V6); + } + + /* + * Always define VBAR for V7 CPUs even if it doesn't exist in + * non-EL3 configs. This is needed by some legacy boards. + */ + set_feature(env, ARM_FEATURE_VBAR); + } + if (arm_feature(env, ARM_FEATURE_V6K)) { + set_feature(env, ARM_FEATURE_V6); + set_feature(env, ARM_FEATURE_MVFR); + } + if (arm_feature(env, ARM_FEATURE_V6)) { + set_feature(env, ARM_FEATURE_V5); + if (!arm_feature(env, ARM_FEATURE_M)) { + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_jazelle, cpu)); + set_feature(env, ARM_FEATURE_AUXCR); + } + } + if (arm_feature(env, ARM_FEATURE_V5)) { + set_feature(env, ARM_FEATURE_V4T); + } + if (arm_feature(env, ARM_FEATURE_LPAE)) { + set_feature(env, ARM_FEATURE_V7MP); + } + if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { + set_feature(env, ARM_FEATURE_CBAR); + } + if (arm_feature(env, ARM_FEATURE_THUMB2) && + !arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_THUMB_DSP); + } +} + void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - /* M profile implies PMSA. We have to do this here rather than - * in realize with the other feature-implication checks because - * we look at the PMSA bit to see if we should add some properties. + /* + * Some features imply others. Figure this out now, because we + * are going to look at the feature bits in deciding which + * properties to add. */ - if (arm_feature(&cpu->env, ARM_FEATURE_M)) { - set_feature(&cpu->env, ARM_FEATURE_PMSA); - } + arm_cpu_propagate_feature_implications(cpu); if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) CPUARMState *env = &cpu->env; int pagebits; Error *local_err = NULL; - bool no_aa32 = false; /* Use pc-relative instructions in system-mode */ #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->isar.id_isar3 = u; } - /* Some features automatically imply others: */ - if (arm_feature(env, ARM_FEATURE_V8)) { - if (arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V7); - } else { - set_feature(env, ARM_FEATURE_V7VE); - } - } - - /* - * There exist AArch64 cpus without AArch32 support. When KVM - * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. - * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. - * As a general principle, we also do not make ID register - * consistency checks anywhere unless using TCG, because only - * for TCG would a consistency-check failure be a QEMU bug. - */ - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { - no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); - } - - if (arm_feature(env, ARM_FEATURE_V7VE)) { - /* v7 Virtualization Extensions. In real hardware this implies - * EL2 and also the presence of the Security Extensions. - * For QEMU, for backwards-compatibility we implement some - * CPUs or CPU configs which have no actual EL2 or EL3 but do - * include the various other features that V7VE implies. - * Presence of EL2 itself is ARM_FEATURE_EL2, and of the - * Security Extensions is ARM_FEATURE_EL3. - */ - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_arm_div, cpu)); - set_feature(env, ARM_FEATURE_LPAE); - set_feature(env, ARM_FEATURE_V7); - } - if (arm_feature(env, ARM_FEATURE_V7)) { - set_feature(env, ARM_FEATURE_VAPA); - set_feature(env, ARM_FEATURE_THUMB2); - set_feature(env, ARM_FEATURE_MPIDR); - if (!arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V6K); - } else { - set_feature(env, ARM_FEATURE_V6); - } - - /* Always define VBAR for V7 CPUs even if it doesn't exist in - * non-EL3 configs. This is needed by some legacy boards. - */ - set_feature(env, ARM_FEATURE_VBAR); - } - if (arm_feature(env, ARM_FEATURE_V6K)) { - set_feature(env, ARM_FEATURE_V6); - set_feature(env, ARM_FEATURE_MVFR); - } - if (arm_feature(env, ARM_FEATURE_V6)) { - set_feature(env, ARM_FEATURE_V5); - if (!arm_feature(env, ARM_FEATURE_M)) { - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_jazelle, cpu)); - set_feature(env, ARM_FEATURE_AUXCR); - } - } - if (arm_feature(env, ARM_FEATURE_V5)) { - set_feature(env, ARM_FEATURE_V4T); - } - if (arm_feature(env, ARM_FEATURE_LPAE)) { - set_feature(env, ARM_FEATURE_V7MP); - } - if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { - set_feature(env, ARM_FEATURE_CBAR); - } - if (arm_feature(env, ARM_FEATURE_THUMB2) && - !arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_THUMB_DSP); - } /* * We rely on no XScale CPU having VFP so we can use the same bits in the -- 2.34.1 M-profile CPUs generally allow configuration of the number of MPU regions that they have. We don't currently model this, so our implementations of some of the board models provide CPUs with the wrong number of regions. RTOSes like Zephyr that hardcode the expected number of regions may therefore not run on the model if they are set up to run on real hardware. Add properties mpu-ns-regions and mpu-s-regions to the ARMV7M object, matching the ability of hardware to configure the number of Secure and NonSecure regions separately. Our actual CPU implementation doesn't currently support that, and it happens that none of the MPS boards we model set the number of regions differently for Secure vs NonSecure, so we provide an interface to the boards and SoCs that won't need to change if we ever do add that functionality in future, but make it an error to configure the two properties to different values. (The property name on the CPU is the somewhat misnamed-for-M-profile "pmsav7-dregion", so we don't follow that naming convention for the properties here. The TRM doesn't say what the CPU configuration variable names are, so we pick something, and follow the lowercase convention we already have for properties here.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-3-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 8 ++++++++ hw/arm/armv7m.c | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ARMv7MState, ARMV7M) * + Property "vfp": enable VFP (forwarded to CPU object) * + Property "dsp": enable DSP (forwarded to CPU object) * + Property "enable-bitband": expose bitbanded IO + * + Property "mpu-ns-regions": number of Non-Secure MPU regions (forwarded + * to CPU object pmsav7-dregion property; default is whatever the default + * for the CPU is) + * + Property "mpu-s-regions": number of Secure MPU regions (default is + * whatever the default for the CPU is; must currently be set to the same + * value as mpu-ns-regions if the CPU implements the Security Extension) * + Clock input "refclk" is the external reference clock for the systick timers * + Clock input "cpuclk" is the main CPU clock */ @@ -XXX,XX +XXX,XX @@ struct ARMv7MState { Object *idau; uint32_t init_svtor; uint32_t init_nsvtor; + uint32_t mpu_ns_regions; + uint32_t mpu_s_regions; bool enable_bitband; bool start_powered_off; bool vfp; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) } } + /* + * Real M-profile hardware can be configured with a different number of + * MPU regions for Secure vs NonSecure. QEMU's CPU implementation doesn't + * support that yet, so catch attempts to select that. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + s->mpu_ns_regions != s->mpu_s_regions) { + error_setg(errp, + "mpu-ns-regions and mpu-s-regions properties must have the same value"); + return; + } + if (s->mpu_ns_regions != UINT_MAX && + object_property_find(OBJECT(s->cpu), "pmsav7-dregion")) { + if (!object_property_set_uint(OBJECT(s->cpu), "pmsav7-dregion", + s->mpu_ns_regions, errp)) { + return; + } + } + /* * Tell the CPU where the NVIC is; it will fail realize if it doesn't * have one. Similarly, tell the NVIC where its CPU is. @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { false), DEFINE_PROP_BOOL("vfp", ARMv7MState, vfp, true), DEFINE_PROP_BOOL("dsp", ARMv7MState, dsp, true), + DEFINE_PROP_UINT32("mpu-ns-regions", ARMv7MState, mpu_ns_regions, UINT_MAX), + DEFINE_PROP_UINT32("mpu-s-regions", ARMv7MState, mpu_s_regions, UINT_MAX), DEFINE_PROP_END_OF_LIST(), }; -- 2.34.1 The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The MPS2/MPS3 FPGA images don't override these except in the case of AN547, which uses 16 MPU regions. Define properties on the ARMSSE object for the MPU regions (using the same names as the documented RTL configuration settings, and following the pattern we already have for this device of using all-caps names as the RTL does), and set them in the board code. We don't actually need to override the default except on AN547, but it's simpler code to have the board code set them always rather than tracking which board subtypes want to set them to a non-default value separately from what that value is. Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524 we now correctly use 8 MPU regions, while mps3-an547 stays at its current 16 regions. It's possible some guest code wrongly depended on the previous incorrectly modeled number of memory regions. (Such guest code should ideally check the number of regions via the MPU_TYPE register.) The old behaviour can be obtained with additional -global arguments to QEMU: For mps2-an521 and mps2-an524: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16 For mps2-an505: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 NB that the way the implementation allows this use of -global is slightly fragile: if the board code explicitly sets the properties on the sse-200 object, this overrides the -global command line option. So we rely on: - the boards that need fixing all happen to use the SSE defaults - we can write the board code to only set the property if it is different from the default, rather than having all boards explicitly set the property - the board that does need to use a non-default value happens to need to set it to the same value (16) we previously used This works, but there are some kinds of refactoring of the mps2-tz.c code that would break the support for -global here. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 5 +++++ hw/arm/armsse.c | 16 ++++++++++++++++ hw/arm/mps2-tz.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an * SSE-200 both are present; CPU0 in an SSE-200 has neither. * Since the IoTKit has only one CPU, it does not have the CPU1_* properties. + * + QOM properties "CPU0_MPU_NS", "CPU0_MPU_S", "CPU1_MPU_NS" and "CPU1_MPU_S" + * which set the number of MPU regions on the CPUs. If there is only one + * CPU the CPU1 properties are not present. * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, * which are wired to its NVIC lines 32 .. n+32 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t exp_numirq; uint32_t sram_addr_width; uint32_t init_svtor; + uint32_t cpu_mpu_ns[SSE_MAX_CPUS]; + uint32_t cpu_mpu_s[SSE_MAX_CPUS]; bool cpu_fpu[SSE_MAX_CPUS]; bool cpu_dsp[SSE_MAX_CPUS]; }; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse200_properties[] = { DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], false), DEFINE_PROP_BOOL("CPU1_FPU", ARMSSE, cpu_fpu[1], true), DEFINE_PROP_BOOL("CPU1_DSP", ARMSSE, cpu_dsp[1], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), + DEFINE_PROP_UINT32("CPU1_MPU_NS", ARMSSE, cpu_mpu_ns[1], 8), + DEFINE_PROP_UINT32("CPU1_MPU_S", ARMSSE, cpu_mpu_s[1], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse300_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } } + if (!object_property_set_uint(cpuobj, "mpu-ns-regions", + s->cpu_mpu_ns[i], errp)) { + return; + } + if (!object_property_set_uint(cpuobj, "mpu-s-regions", + s->cpu_mpu_s[i], errp)) { + return; + } if (i > 0) { memory_region_add_subregion_overlap(&s->cpu_container[i], 0, diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineClass { int uart_overflow_irq; /* number of the combined UART overflow IRQ */ uint32_t init_svtor; /* init-svtor setting for SSE */ uint32_t sram_addr_width; /* SRAM_ADDR_WIDTH setting for SSE */ + uint32_t cpu0_mpu_ns; /* CPU0_MPU_NS setting for SSE */ + uint32_t cpu0_mpu_s; /* CPU0_MPU_S setting for SSE */ + uint32_t cpu1_mpu_ns; /* CPU1_MPU_NS setting for SSE */ + uint32_t cpu1_mpu_s; /* CPU1_MPU_S setting for SSE */ const RAMInfo *raminfo; const char *armsse_type; uint32_t boot_ram_size; /* size of ram at address 0; 0 == find in raminfo */ @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) #define MPS3_DDR_SIZE (2 * GiB) #endif +/* For cpu{0,1}_mpu_{ns,s}, means "leave at SSE's default value" */ +#define MPU_REGION_DEFAULT UINT32_MAX + static const uint32_t an505_oscclk[] = { 40000000, 24580000, @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq); qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor); + if (mmc->cpu0_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_NS", mmc->cpu0_mpu_ns); + } + if (mmc->cpu0_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_S", mmc->cpu0_mpu_s); + } + if (object_property_find(OBJECT(iotkitdev), "CPU1_MPU_NS")) { + if (mmc->cpu1_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_NS", mmc->cpu1_mpu_ns); + } + if (mmc->cpu1_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_S", mmc->cpu1_mpu_s); + } + } qdev_prop_set_uint32(iotkitdev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); @@ -XXX,XX +XXX,XX @@ static void mps2tz_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); mc->init = mps2tz_common_init; mc->reset = mps2_machine_reset; iic->check = mps2_tz_idau_check; + + /* Most machines leave these at the SSE defaults */ + mmc->cpu0_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu0_mpu_s = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_s = MPU_REGION_DEFAULT; } static void mps2tz_set_default_ram_info(MPS2TZMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3tz_an547_class_init(ObjectClass *oc, void *data) mmc->numirq = 96; mmc->uart_overflow_irq = 48; mmc->init_svtor = 0x00000000; + mmc->cpu0_mpu_s = mmc->cpu0_mpu_ns = 16; mmc->sram_addr_width = 21; mmc->raminfo = an547_raminfo; mmc->armsse_type = TYPE_SSE300; -- 2.34.1