The following changes since commit 7e7eb9f852a46b51a71ae9d82590b2e4d28827ee: Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-01-28' into staging (2021-01-28 22:43:18 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20210129 for you to fetch changes up to 11749122e1a86866591306d43603d2795a3dea1a: hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS (2021-01-29 10:47:29 +0000) ---------------------------------------------------------------- target-arm queue: * Implement ID_PFR2 * Conditionalize DBGDIDR * rename xlnx-zcu102.canbusN properties * provide powerdown/reset mechanism for secure firmware on 'virt' board * hw/misc: Fix arith overflow in NPCM7XX PWM module * target/arm: Replace magic value by MMU_DATA_LOAD definition * configure: fix preadv errors on Catalina macOS with new XCode * Various configure and other cleanups in preparation for iOS support * hvf: Add hypervisor entitlement to output binaries (needed for Big Sur) * Implement pvpanic-pci device * Convert the CMSDK timer devices to the Clock framework ---------------------------------------------------------------- Alexander Graf (1): hvf: Add hypervisor entitlement to output binaries Hao Wu (1): hw/misc: Fix arith overflow in NPCM7XX PWM module Joelle van Dyne (7): configure: cross-compiling with empty cross_prefix osdep: build with non-working system() function darwin: remove redundant dependency declaration darwin: fix cross-compiling for Darwin configure: cross compile should use x86_64 cpu_family darwin: detect CoreAudio for build darwin: remove 64-bit build detection on 32-bit OS Maxim Uvarov (3): hw: gpio: implement gpio-pwr driver for qemu reset/poweroff arm-virt: refactor gpios creation arm-virt: add secure pl061 for reset/power down Mihai Carabas (4): hw/misc/pvpanic: split-out generic and bus dependent code hw/misc/pvpanic: add PCI interface support pvpanic : update pvpanic spec document tests/qtest: add a test case for pvpanic-pci Paolo Bonzini (1): arm: rename xlnx-zcu102.canbusN properties Peter Maydell (26): configure: Move preadv check to meson.build ptimer: Add new ptimer_set_period_from_clock() function clock: Add new clock_has_source() function tests: Add a simple test of the CMSDK APB timer tests: Add a simple test of the CMSDK APB watchdog tests: Add a simple test of the CMSDK APB dual timer hw/timer/cmsdk-apb-timer: Rename CMSDKAPBTIMER struct to CMSDKAPBTimer hw/timer/cmsdk-apb-timer: Add Clock input hw/timer/cmsdk-apb-dualtimer: Add Clock input hw/watchdog/cmsdk-apb-watchdog: Add Clock input hw/arm/armsse: Rename "MAINCLK" property to "MAINCLK_FRQ" hw/arm/armsse: Wire up clocks hw/arm/mps2: Inline CMSDK_APB_TIMER creation hw/arm/mps2: Create and connect SYSCLK Clock hw/arm/mps2-tz: Create and connect ARMSSE Clocks hw/arm/musca: Create and connect ARMSSE Clocks hw/arm/stellaris: Convert SSYS to QOM device hw/arm/stellaris: Create Clock input for watchdog hw/timer/cmsdk-apb-timer: Convert to use Clock input hw/timer/cmsdk-apb-dualtimer: Convert to use Clock input hw/watchdog/cmsdk-apb-watchdog: Convert to use Clock input tests/qtest/cmsdk-apb-watchdog-test: Test clock changes hw/arm/armsse: Use Clock to set system_clock_scale arm: Don't set freq properties on CMSDK timer, dualtimer, watchdog, ARMSSE arm: Remove frq properties on CMSDK timer, dualtimer, watchdog, ARMSSE hw/arm/stellaris: Remove board-creation reset of STELLARIS_SYS Philippe Mathieu-Daudé (1): target/arm: Replace magic value by MMU_DATA_LOAD definition Richard Henderson (2): target/arm: Implement ID_PFR2 target/arm: Conditionalize DBGDIDR docs/devel/clocks.rst | 16 +++ docs/specs/pci-ids.txt | 1 + docs/specs/pvpanic.txt | 13 ++- docs/system/arm/virt.rst | 2 + configure | 78 ++++++++------ meson.build | 34 ++++++- include/hw/arm/armsse.h | 14 ++- include/hw/arm/virt.h | 2 + include/hw/clock.h | 15 +++ include/hw/misc/pvpanic.h | 24 ++++- include/hw/pci/pci.h | 1 + include/hw/ptimer.h | 22 ++++ include/hw/timer/cmsdk-apb-dualtimer.h | 5 +- include/hw/timer/cmsdk-apb-timer.h | 34 ++----- include/hw/watchdog/cmsdk-apb-watchdog.h | 5 +- include/qemu/osdep.h | 12 +++ include/qemu/typedefs.h | 1 + target/arm/cpu.h | 1 + hw/arm/armsse.c | 48 ++++++--- hw/arm/mps2-tz.c | 14 ++- hw/arm/mps2.c | 28 ++++- hw/arm/musca.c | 13 ++- hw/arm/stellaris.c | 170 +++++++++++++++++++++++-------- hw/arm/virt.c | 111 ++++++++++++++++---- hw/arm/xlnx-zcu102.c | 4 +- hw/core/ptimer.c | 34 +++++++ hw/gpio/gpio_pwr.c | 70 +++++++++++++ hw/misc/npcm7xx_pwm.c | 23 ++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++ hw/misc/pvpanic-pci.c | 94 +++++++++++++++++ hw/misc/pvpanic.c | 85 ++-------------- hw/timer/cmsdk-apb-dualtimer.c | 53 +++++++--- hw/timer/cmsdk-apb-timer.c | 55 +++++----- hw/watchdog/cmsdk-apb-watchdog.c | 29 ++++-- target/arm/helper.c | 27 +++-- target/arm/kvm64.c | 2 + tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++ tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++ tests/qtest/cmsdk-apb-watchdog-test.c | 131 ++++++++++++++++++++++++ tests/qtest/npcm7xx_pwm-test.c | 4 +- tests/qtest/pvpanic-pci-test.c | 94 +++++++++++++++++ tests/qtest/xlnx-can-test.c | 30 +++--- MAINTAINERS | 3 + accel/hvf/entitlements.plist | 8 ++ hw/arm/Kconfig | 1 + hw/gpio/Kconfig | 3 + hw/gpio/meson.build | 1 + hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 12 ++- hw/misc/meson.build | 4 +- scripts/entitlement.sh | 13 +++ tests/qtest/meson.build | 6 +- 52 files changed, 1432 insertions(+), 319 deletions(-) create mode 100644 hw/gpio/gpio_pwr.c create mode 100644 hw/misc/pvpanic-isa.c create mode 100644 hw/misc/pvpanic-pci.c create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c create mode 100644 tests/qtest/cmsdk-apb-timer-test.c create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c create mode 100644 tests/qtest/pvpanic-pci-test.c create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh From: Richard Henderson <richard.henderson@linaro.org> This was defined at some point before ARMv8.4, and will shortly be used by new processor descriptions. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120204400.1056582-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 1 + target/arm/helper.c | 4 ++-- target/arm/kvm64.c | 2 ++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { uint32_t id_mmfr4; uint32_t id_pfr0; uint32_t id_pfr1; + uint32_t id_pfr2; uint32_t mvfr0; uint32_t mvfr1; uint32_t mvfr2; diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, .resetvalue = 0 }, - { .name = "MVFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, + { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, .access = PL1_R, .type = ARM_CP_CONST, .accessfn = access_aa64_tid3, - .resetvalue = 0 }, + .resetvalue = cpu->isar.id_pfr2 }, { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, .access = PL1_R, .type = ARM_CP_CONST, diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) ARM64_SYS_REG(3, 0, 0, 1, 0)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr1, ARM64_SYS_REG(3, 0, 0, 1, 1)); + err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_pfr2, + ARM64_SYS_REG(3, 0, 0, 3, 4)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_dfr0, ARM64_SYS_REG(3, 0, 0, 1, 2)); err |= read_sys_reg32(fdarray[2], &ahcf->isar.id_mmfr0, -- 2.20.1 From: Richard Henderson <richard.henderson@linaro.org> Only define the register if it exists for the cpu. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210120031656.737646-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) */ int i; int wrps, brps, ctx_cmps; - ARMCPRegInfo dbgdidr = { - .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, - .access = PL0_R, .accessfn = access_tda, - .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, - }; + + /* + * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot + * use AArch32. Given that bit 15 is RES1, if the value is 0 then + * the register must not exist for this cpu. + */ + if (cpu->isar.dbgdidr != 0) { + ARMCPRegInfo dbgdidr = { + .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, + .opc1 = 0, .opc2 = 0, + .access = PL0_R, .accessfn = access_tda, + .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, + }; + define_one_arm_cp_reg(cpu, &dbgdidr); + } /* Note that all these register fields hold "number of Xs minus 1". */ brps = arm_num_brps(cpu); @@ -XXX,XX +XXX,XX @@ static void define_debug_regs(ARMCPU *cpu) assert(ctx_cmps <= brps); - define_one_arm_cp_reg(cpu, &dbgdidr); define_arm_cp_regs(cpu, debug_cp_reginfo); if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { -- 2.20.1 From: Paolo Bonzini <pbonzini@redhat.com> The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 4 ++-- tests/qtest/xlnx-can-test.c | 30 +++++++++++++++--------------- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) s->secure = false; /* Default to virt (EL2) being disabled */ s->virt = false; - object_property_add_link(obj, "xlnx-zcu102.canbus0", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS, (Object **)&s->canbus[0], object_property_allow_set_link, 0); - object_property_add_link(obj, "xlnx-zcu102.canbus1", TYPE_CAN_BUS, + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS, (Object **)&s->canbus[1], object_property_allow_set_link, 0); diff --git a/tests/qtest/xlnx-can-test.c b/tests/qtest/xlnx-can-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/xlnx-can-test.c +++ b/tests/qtest/xlnx-can-test.c @@ -XXX,XX +XXX,XX @@ static void test_can_bus(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_loopback(void) uint32_t status = 0; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 in loopback mode. */ @@ -XXX,XX +XXX,XX @@ static void test_can_filter(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0 and CAN1. */ @@ -XXX,XX +XXX,XX @@ static void test_can_sleepmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ @@ -XXX,XX +XXX,XX @@ static void test_can_snoopmode(void) uint8_t can_timestamp = 1; QTestState *qts = qtest_init("-machine xlnx-zcu102" - " -object can-bus,id=canbus0" - " -machine xlnx-zcu102.canbus0=canbus0" - " -machine xlnx-zcu102.canbus1=canbus0" + " -object can-bus,id=canbus" + " -machine canbus0=canbus" + " -machine canbus1=canbus" ); /* Configure the CAN0. */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Implement gpio-pwr driver to allow reboot and poweroff machine. This is simple driver with just 2 gpios lines. Current use case is to reboot and poweroff virt machine in secure mode. Secure pl066 gpio chip is needed for that. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/gpio/gpio_pwr.c | 70 +++++++++++++++++++++++++++++++++++++++++++++ hw/gpio/Kconfig | 3 ++ hw/gpio/meson.build | 1 + 3 files changed, 74 insertions(+) create mode 100644 hw/gpio/gpio_pwr.c diff --git a/hw/gpio/gpio_pwr.c b/hw/gpio/gpio_pwr.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/gpio/gpio_pwr.c @@ -XXX,XX +XXX,XX @@ +/* + * GPIO qemu power controller + * + * Copyright (c) 2020 Linaro Limited + * + * Author: Maxim Uvarov <maxim.uvarov@linaro.org> + * + * Virtual gpio driver which can be used on top of pl061 + * to reboot and shutdown qemu virtual machine. One of use + * case is gpio driver for secure world application (ARM + * Trusted Firmware.). + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +/* + * QEMU interface: + * two named input GPIO lines: + * 'reset' : when asserted, trigger system reset + * 'shutdown' : when asserted, trigger system shutdown + */ + +#include "qemu/osdep.h" +#include "hw/sysbus.h" +#include "sysemu/runstate.h" + +#define TYPE_GPIOPWR "gpio-pwr" +OBJECT_DECLARE_SIMPLE_TYPE(GPIO_PWR_State, GPIOPWR) + +struct GPIO_PWR_State { + SysBusDevice parent_obj; +}; + +static void gpio_pwr_reset(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); + } +} + +static void gpio_pwr_shutdown(void *opaque, int n, int level) +{ + if (level) { + qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); + } +} + +static void gpio_pwr_init(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + + qdev_init_gpio_in_named(dev, gpio_pwr_reset, "reset", 1); + qdev_init_gpio_in_named(dev, gpio_pwr_shutdown, "shutdown", 1); +} + +static const TypeInfo gpio_pwr_info = { + .name = TYPE_GPIOPWR, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(GPIO_PWR_State), + .instance_init = gpio_pwr_init, +}; + +static void gpio_pwr_register_types(void) +{ + type_register_static(&gpio_pwr_info); +} + +type_init(gpio_pwr_register_types) diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -XXX,XX +XXX,XX @@ config PL061 config GPIO_KEY bool +config GPIO_PWR + bool + config SIFIVE_GPIO bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_E500', if_true: files('mpc8xxx.c')) softmmu_ss.add(when: 'CONFIG_GPIO_KEY', if_true: files('gpio_key.c')) +softmmu_ss.add(when: 'CONFIG_GPIO_PWR', if_true: files('gpio_pwr.c')) softmmu_ss.add(when: 'CONFIG_MAX7310', if_true: files('max7310.c')) softmmu_ss.add(when: 'CONFIG_PL061', if_true: files('pl061.c')) softmmu_ss.add(when: 'CONFIG_PUV3', if_true: files('puv3_gpio.c')) -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> No functional change. Just refactor code to better support secure and normal world gpios. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 57 ++++++++++++++++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void virt_powerdown_req(Notifier *n, void *opaque) } } -static void create_gpio(const VirtMachineState *vms) +static void create_gpio_keys(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", + "label", "GPIO Key Poweroff"); + qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", + KEY_POWER); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", + "gpios", phandle, 3, 0); +} + +static void create_gpio_devices(const VirtMachineState *vms, int gpio, + MemoryRegion *mem) { char *nodename; DeviceState *pl061_dev; - hwaddr base = vms->memmap[VIRT_GPIO].base; - hwaddr size = vms->memmap[VIRT_GPIO].size; - int irq = vms->irqmap[VIRT_GPIO]; + hwaddr base = vms->memmap[gpio].base; + hwaddr size = vms->memmap[gpio].size; + int irq = vms->irqmap[gpio]; const char compat[] = "arm,pl061\0arm,primecell"; + SysBusDevice *s; - pl061_dev = sysbus_create_simple("pl061", base, - qdev_get_gpio_in(vms->gic, irq)); + pl061_dev = qdev_new("pl061"); + s = SYS_BUS_DEVICE(pl061_dev); + sysbus_realize_and_unref(s, &error_fatal); + memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq)); uint32_t phandle = qemu_fdt_alloc_phandle(vms->fdt); nodename = g_strdup_printf("/pl061@%" PRIx64, base); @@ -XXX,XX +XXX,XX @@ static void create_gpio(const VirtMachineState *vms) qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); - gpio_key_dev = sysbus_create_simple("gpio-key", -1, - qdev_get_gpio_in(pl061_dev, 3)); - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#address-cells", 1); - - qemu_fdt_add_subnode(vms->fdt, "/gpio-keys/poweroff"); - qemu_fdt_setprop_string(vms->fdt, "/gpio-keys/poweroff", - "label", "GPIO Key Poweroff"); - qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys/poweroff", "linux,code", - KEY_POWER); - qemu_fdt_setprop_cells(vms->fdt, "/gpio-keys/poweroff", - "gpios", phandle, 3, 0); g_free(nodename); + + /* Child gpio devices */ + create_gpio_keys(vms, pl061_dev, phandle); } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) if (has_ged && aarch64 && firmware_loaded && virt_is_acpi_enabled(vms)) { vms->acpi_dev = create_acpi_ged(vms); } else { - create_gpio(vms); + create_gpio_devices(vms, VIRT_GPIO, sysmem); } /* connect powerdown request */ -- 2.20.1 From: Maxim Uvarov <maxim.uvarov@linaro.org> Add secure pl061 for reset/power down machine from the secure world (Arm Trusted Firmware). Connect it with gpio-pwr driver. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> [PMM: Added mention of the new device to the documentation] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 2 ++ include/hw/arm/virt.h | 2 ++ hw/arm/virt.c | 56 +++++++++++++++++++++++++++++++++++++++- hw/arm/Kconfig | 1 + 4 files changed, 60 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ The virt board supports: - Secure-World-only devices if the CPU has TrustZone: - A second PL011 UART + - A second PL061 GPIO controller, with GPIO lines for triggering + a system reset or system poweroff - A secure flash memory - 16MB of secure RAM diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ enum { VIRT_GPIO, VIRT_SECURE_UART, VIRT_SECURE_MEM, + VIRT_SECURE_GPIO, VIRT_PCDIMM_ACPI, VIRT_ACPI_GED, VIRT_NVDIMM_ACPI, @@ -XXX,XX +XXX,XX @@ struct VirtMachineClass { bool kvm_no_adjvtime; bool no_kvm_steal_time; bool acpi_expose_flash; + bool no_secure_gpio; }; struct VirtMachineState { diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const MemMapEntry base_memmap[] = { [VIRT_ACPI_GED] = { 0x09080000, ACPI_GED_EVT_SEL_LEN }, [VIRT_NVDIMM_ACPI] = { 0x09090000, NVDIMM_ACPI_IO_LEN}, [VIRT_PVTIME] = { 0x090a0000, 0x00010000 }, + [VIRT_SECURE_GPIO] = { 0x090b0000, 0x00001000 }, [VIRT_MMIO] = { 0x0a000000, 0x00000200 }, /* ...repeating for a total of NUM_VIRTIO_TRANSPORTS, each of that size */ [VIRT_PLATFORM_BUS] = { 0x0c000000, 0x02000000 }, @@ -XXX,XX +XXX,XX @@ static void create_gpio_keys(const VirtMachineState *vms, "gpios", phandle, 3, 0); } +#define SECURE_GPIO_POWEROFF 0 +#define SECURE_GPIO_RESET 1 + +static void create_secure_gpio_pwr(const VirtMachineState *vms, + DeviceState *pl061_dev, + uint32_t phandle) +{ + DeviceState *gpio_pwr_dev; + + /* gpio-pwr */ + gpio_pwr_dev = sysbus_create_simple("gpio-pwr", -1, NULL); + + /* connect secure pl061 to gpio-pwr */ + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_RESET, + qdev_get_gpio_in_named(gpio_pwr_dev, "reset", 0)); + qdev_connect_gpio_out(pl061_dev, SECURE_GPIO_POWEROFF, + qdev_get_gpio_in_named(gpio_pwr_dev, "shutdown", 0)); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-poweroff"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "compatible", + "gpio-poweroff"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-poweroff", + "gpios", phandle, SECURE_GPIO_POWEROFF, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-poweroff", "secure-status", + "okay"); + + qemu_fdt_add_subnode(vms->fdt, "/gpio-restart"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "compatible", + "gpio-restart"); + qemu_fdt_setprop_cells(vms->fdt, "/gpio-restart", + "gpios", phandle, SECURE_GPIO_RESET, 0); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, "/gpio-restart", "secure-status", + "okay"); +} + static void create_gpio_devices(const VirtMachineState *vms, int gpio, MemoryRegion *mem) { @@ -XXX,XX +XXX,XX @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio, qemu_fdt_setprop_string(vms->fdt, nodename, "clock-names", "apb_pclk"); qemu_fdt_setprop_cell(vms->fdt, nodename, "phandle", phandle); + if (gpio != VIRT_GPIO) { + /* Mark as not usable by the normal world */ + qemu_fdt_setprop_string(vms->fdt, nodename, "status", "disabled"); + qemu_fdt_setprop_string(vms->fdt, nodename, "secure-status", "okay"); + } g_free(nodename); /* Child gpio devices */ - create_gpio_keys(vms, pl061_dev, phandle); + if (gpio == VIRT_GPIO) { + create_gpio_keys(vms, pl061_dev, phandle); + } else { + create_secure_gpio_pwr(vms, pl061_dev, phandle); + } } static void create_virtio_devices(const VirtMachineState *vms) @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) create_gpio_devices(vms, VIRT_GPIO, sysmem); } + if (vms->secure && !vmc->no_secure_gpio) { + create_gpio_devices(vms, VIRT_SECURE_GPIO, secure_sysmem); + } + /* connect powerdown request */ vms->powerdown_notifier.notify = virt_powerdown_req; qemu_register_powerdown_notifier(&vms->powerdown_notifier); @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(6, 0) static void virt_machine_5_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_6_0_options(mc); compat_props_add(mc->compat_props, hw_compat_5_2, hw_compat_5_2_len); + vmc->no_secure_gpio = true; } DEFINE_VIRT_MACHINE(5, 2) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config ARM_VIRT select PL011 # UART select PL031 # RTC select PL061 # GPIO + select GPIO_PWR select PLATFORM_BUS select SMBIOS select VIRTIO_MMIO -- 2.20.1 From: Hao Wu <wuhaotsh@google.com> Fix potential overflow problem when calculating pwm_duty. 1. Ensure p->cmr and p->cnr to be from [0,65535], according to the hardware specification. 2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1) can excceed UINT32_MAX, we convert them to uint64_t in computation and converted them back to uint32_t. (duty is guaranteed to be <= MAX_DUTY so it won't overflow.) Fixes: CID 1442342 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Doug Evans <dje@google.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210127011142.2122790-1-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/npcm7xx_pwm.c | 23 +++++++++++++++++++---- tests/qtest/npcm7xx_pwm-test.c | 4 ++-- 2 files changed, 21 insertions(+), 6 deletions(-) diff --git a/hw/misc/npcm7xx_pwm.c b/hw/misc/npcm7xx_pwm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/npcm7xx_pwm.c +++ b/hw/misc/npcm7xx_pwm.c @@ -XXX,XX +XXX,XX @@ REG32(NPCM7XX_PWM_PWDR3, 0x50); #define NPCM7XX_CH_INV BIT(2) #define NPCM7XX_CH_MOD BIT(3) +#define NPCM7XX_MAX_CMR 65535 +#define NPCM7XX_MAX_CNR 65535 + /* Offset of each PWM channel's prescaler in the PPR register. */ static const int npcm7xx_ppr_base[] = { 0, 0, 8, 8 }; /* Offset of each PWM channel's clock selector in the CSR register. */ @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_freq(NPCM7xxPWM *p) static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) { - uint64_t duty; + uint32_t duty; if (p->running) { if (p->cnr == 0) { @@ -XXX,XX +XXX,XX @@ static uint32_t npcm7xx_pwm_calculate_duty(NPCM7xxPWM *p) } else if (p->cmr >= p->cnr) { duty = NPCM7XX_PWM_MAX_DUTY; } else { - duty = NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); + duty = (uint64_t)NPCM7XX_PWM_MAX_DUTY * (p->cmr + 1) / (p->cnr + 1); } } else { duty = 0; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CNR2: case A_NPCM7XX_PWM_CNR3: p = &s->pwm[npcm7xx_cnr_index(offset)]; - p->cnr = value; + if (value > NPCM7XX_MAX_CNR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cnr value: %u", __func__, value); + p->cnr = NPCM7XX_MAX_CNR; + } else { + p->cnr = value; + } npcm7xx_pwm_update_output(p); break; @@ -XXX,XX +XXX,XX @@ static void npcm7xx_pwm_write(void *opaque, hwaddr offset, case A_NPCM7XX_PWM_CMR2: case A_NPCM7XX_PWM_CMR3: p = &s->pwm[npcm7xx_cmr_index(offset)]; - p->cmr = value; + if (value > NPCM7XX_MAX_CMR) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: invalid cmr value: %u", __func__, value); + p->cmr = NPCM7XX_MAX_CMR; + } else { + p->cmr = value; + } npcm7xx_pwm_update_output(p); break; diff --git a/tests/qtest/npcm7xx_pwm-test.c b/tests/qtest/npcm7xx_pwm-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/npcm7xx_pwm-test.c +++ b/tests/qtest/npcm7xx_pwm-test.c @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_freq(QTestState *qts, uint32_t ppr, uint32_t csr, static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) { - uint64_t duty; + uint32_t duty; if (cnr == 0) { /* PWM is stopped. */ @@ -XXX,XX +XXX,XX @@ static uint64_t pwm_compute_duty(uint32_t cnr, uint32_t cmr, bool inverted) } else if (cmr >= cnr) { duty = MAX_DUTY; } else { - duty = MAX_DUTY * (cmr + 1) / (cnr + 1); + duty = (uint64_t)MAX_DUTY * (cmr + 1) / (cnr + 1); } if (inverted) { -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> cpu_get_phys_page_debug() uses 'DATA LOAD' MMU access type. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210127232822.3530782-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, *attrs = (MemTxAttrs) {}; - ret = get_phys_addr(env, addr, 0, mmu_idx, &phys_addr, + ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, attrs, &prot, &page_size, &fi, &cacheattrs); if (ret) { -- 2.20.1 Move the preadv availability check to meson.build. This is what we want to be doing for host-OS-feature-checks anyway, but it also fixes a problem with building for macOS with the most recent XCode SDK on a Catalina host. On that configuration, 'preadv()' is provided as a weak symbol, so that programs can be built with optional support for it and make a runtime availability check to see whether the preadv() they have is a working one or one which they must not call because it will runtime-assert. QEMU's configure test passes (unless you're building with --enable-werror) because the test program using preadv() compiles, but then QEMU crashes at runtime when preadv() is called, with errors like: dyld: lazy symbol binding failed: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: _preadv Referenced from: /Users/pm215/src/qemu/./build/x86/tests/test-replication Expected in: /usr/lib/libSystem.B.dylib Meson's own function availability check has a special case for macOS which adds '-Wl,-no_weak_imports' to the compiler flags, which forces the test to require the real function, not the macOS-version-too-old stub. So this commit fixes the bug where macOS builds on Catalina currently require --disable-werror. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210126155846.17109-1-peter.maydell@linaro.org --- configure | 16 ---------------- meson.build | 4 +++- 2 files changed, 3 insertions(+), 17 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if compile_prog "" "" ; then iovec=yes fi -########################################## -# preadv probe -cat > $TMPC <<EOF -#include <sys/types.h> -#include <sys/uio.h> -#include <unistd.h> -int main(void) { return preadv(0, 0, 0, 0); } -EOF -preadv=no -if compile_prog "" "" ; then - preadv=yes -fi - ########################################## # fdt probe @@ -XXX,XX +XXX,XX @@ fi if test "$iovec" = "yes" ; then echo "CONFIG_IOVEC=y" >> $config_host_mak fi -if test "$preadv" = "yes" ; then - echo "CONFIG_PREADV=y" >> $config_host_mak -fi if test "$membarrier" = "yes" ; then echo "CONFIG_MEMBARRIER=y" >> $config_host_mak fi diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) + ignored = ['CONFIG_QEMU_INTERP_PREFIX'] # actually per-target arrays = ['CONFIG_AUDIO_DRIVERS', 'CONFIG_BDRV_RW_WHITELIST', 'CONFIG_BDRV_RO_WHITELIST'] strings = ['HOST_DSOSUF', 'CONFIG_IASL'] @@ -XXX,XX +XXX,XX @@ summary_info += {'PIE': get_option('b_pie')} summary_info += {'static build': config_host.has_key('CONFIG_STATIC')} summary_info += {'malloc trim support': has_malloc_trim} summary_info += {'membarrier': config_host.has_key('CONFIG_MEMBARRIER')} -summary_info += {'preadv support': config_host.has_key('CONFIG_PREADV')} +summary_info += {'preadv support': config_host_data.get('CONFIG_PREADV')} summary_info += {'fdatasync': config_host.has_key('CONFIG_FDATASYNC')} summary_info += {'madvise': config_host.has_key('CONFIG_MADVISE')} summary_info += {'posix_madvise': config_host.has_key('CONFIG_POSIX_MADVISE')} -- 2.20.1 From: Joelle van Dyne <j@getutm.app> The iOS toolchain does not use the host prefix naming convention. So we need to enable cross-compile options while allowing the PREFIX to be blank. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-3-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ cpu="" iasl="iasl" interp_prefix="/usr/gnemul/qemu-%M" static="no" +cross_compile="no" cross_prefix="" audio_drv_list="" block_drv_rw_whitelist="" @@ -XXX,XX +XXX,XX @@ for opt do optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)') case "$opt" in --cross-prefix=*) cross_prefix="$optarg" + cross_compile="yes" ;; --cc=*) CC="$optarg" ;; @@ -XXX,XX +XXX,XX @@ $(echo Deprecated targets: $deprecated_targets_list | \ --target-list-exclude=LIST exclude a set of targets from the default target-list Advanced options (experts only): - --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] + --cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix] --cc=CC use C compiler CC [$cc] --iasl=IASL use ACPI compiler IASL [$iasl] --host-cc=CC use C compiler CC [$host_cc] for code run at @@ -XXX,XX +XXX,XX @@ if has $sdl2_config; then fi echo "strip = [$(meson_quote $strip)]" >> $cross echo "windres = [$(meson_quote $windres)]" >> $cross -if test -n "$cross_prefix"; then +if test "$cross_compile" = "yes"; then cross_arg="--cross-file config-meson.cross" echo "[host_machine]" >> $cross if test "$mingw32" = "yes" ; then -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Build without error on hosts without a working system(). If system() is called, return -1 with ENOSYS. Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-6-j@getutm.app Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 1 + include/qemu/osdep.h | 12 ++++++++++++ 2 files changed, 13 insertions(+) diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h')) config_host_data.set('HAVE_PTY_H', cc.has_header('pty.h')) config_host_data.set('HAVE_SYS_IOCCOM_H', cc.has_header('sys/ioccom.h')) config_host_data.set('HAVE_SYS_KCOV_H', cc.has_header('sys/kcov.h')) +config_host_data.set('HAVE_SYSTEM_FUNCTION', cc.has_function('system', prefix: '#include <stdlib.h>')) config_host_data.set('CONFIG_PREADV', cc.has_function('preadv', prefix: '#include <sys/uio.h>')) diff --git a/include/qemu/osdep.h b/include/qemu/osdep.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/osdep.h +++ b/include/qemu/osdep.h @@ -XXX,XX +XXX,XX @@ static inline void qemu_thread_jit_write(void) {} static inline void qemu_thread_jit_execute(void) {} #endif +/** + * Platforms which do not support system() return ENOSYS + */ +#ifndef HAVE_SYSTEM_FUNCTION +#define system platform_does_not_support_system +static inline int platform_does_not_support_system(const char *command) +{ + errno = ENOSYS; + return -1; +} +#endif /* !HAVE_SYSTEM_FUNCTION */ + #endif -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Meson will find CoreFoundation, IOKit, and Cocoa as needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-7-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 1 - 1 file changed, 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ Darwin) fi audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" - QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Add objc to the Meson cross file as well as detection of Darwin. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-8-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross echo "[binaries]" >> $cross echo "c = [$(meson_quote $cc)]" >> $cross test -n "$cxx" && echo "cpp = [$(meson_quote $cxx)]" >> $cross +test -n "$objcc" && echo "objc = [$(meson_quote $objcc)]" >> $cross echo "ar = [$(meson_quote $ar)]" >> $cross echo "nm = [$(meson_quote $nm)]" >> $cross echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then if test "$linux" = "yes" ; then echo "system = 'linux'" >> $cross fi + if test "$darwin" = "yes" ; then + echo "system = 'darwin'" >> $cross + fi case "$ARCH" in i386|x86_64) echo "cpu_family = 'x86'" >> $cross -- 2.20.1 From: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-9-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ if test "$cross_compile" = "yes"; then echo "system = 'darwin'" >> $cross fi case "$ARCH" in - i386|x86_64) + i386) echo "cpu_family = 'x86'" >> $cross ;; + x86_64) + echo "cpu_family = 'x86_64'" >> $cross + ;; ppc64le) echo "cpu_family = 'ppc64'" >> $cross ;; -- 2.20.1 From: Joelle van Dyne <j@getutm.app> On iOS there is no CoreAudio, so we should not assume Darwin always has it. Signed-off-by: Joelle van Dyne <j@getutm.app> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210126012457.39046-11-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fdt="auto" netmap="no" sdl="auto" sdl_image="auto" +coreaudio="auto" virtiofsd="auto" virtfs="auto" libudev="auto" @@ -XXX,XX +XXX,XX @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - audio_drv_list="coreaudio try-sdl" + audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they # won't work when we're compiling with gcc as a C compiler. @@ -XXX,XX +XXX,XX @@ EOF fi fi +########################################## +# detect CoreAudio +if test "$coreaudio" != "no" ; then + coreaudio_libs="-framework CoreAudio" + cat > $TMPC << EOF +#include <CoreAudio/CoreAudio.h> +int main(void) +{ + return (int)AudioGetCurrentHostTime(); +} +EOF + if compile_prog "" "$coreaudio_libs" ; then + coreaudio=yes + else + coreaudio=no + fi +fi + ########################################## # Sound support libraries probe @@ -XXX,XX +XXX,XX @@ for drv in $audio_drv_list; do fi ;; - coreaudio) + coreaudio | try-coreaudio) + if test "$coreaudio" = "no"; then + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio//') + else + error_exit "$drv check failed" \ + "Make sure to have the $drv is available." + fi + else coreaudio_libs="-framework CoreAudio" + if test "$drv" = "try-coreaudio"; then + audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-coreaudio/coreaudio/') + fi + fi ;; dsound) -- 2.20.1 From: Joelle van Dyne <j@getutm.app> A workaround added in early days of 64-bit OSX forced x86_64 if the host machine had 64-bit support. This creates issues when cross- compiling for ARM64. Additionally, the user can always use --cpu=* to manually set the host CPU and therefore this workaround should be removed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Joelle van Dyne <j@getutm.app> Message-id: 20210126012457.39046-12-j@getutm.app Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- configure | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/configure b/configure index XXXXXXX..XXXXXXX 100755 --- a/configure +++ b/configure @@ -XXX,XX +XXX,XX @@ fi # the correct CPU with the --cpu option. case $targetos in Darwin) - # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can - # run 64-bit userspace code. - # If the user didn't specify a CPU explicitly and the kernel says this is - # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. - if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then - cpu="x86_64" - fi HOST_DSOSUF=".dylib" ;; SunOS) @@ -XXX,XX +XXX,XX @@ OpenBSD) Darwin) bsd="yes" darwin="yes" - if [ "$cpu" = "x86_64" ] ; then - QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" - QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" - fi audio_drv_list="try-coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" # Disable attempts to use ObjectiveC features in os/object.h since they -- 2.20.1 From: Alexander Graf <agraf@csgraf.de> In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build. Signed-off-by: Alexander Graf <agraf@csgraf.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Tested-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- meson.build | 29 +++++++++++++++++++++++++---- accel/hvf/entitlements.plist | 8 ++++++++ scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh diff --git a/meson.build b/meson.build index XXXXXXX..XXXXXXX 100644 --- a/meson.build +++ b/meson.build @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true), @@ -XXX,XX +XXX,XX @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [ diff --git a/accel/hvf/entitlements.plist b/accel/hvf/entitlements.plist new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/accel/hvf/entitlements.plist @@ -XXX,XX +XXX,XX @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist> diff --git a/scripts/entitlement.sh b/scripts/entitlement.sh new file mode 100755 index XXXXXXX..XXXXXXX --- /dev/null +++ b/scripts/entitlement.sh @@ -XXX,XX +XXX,XX @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> To ease the PCI device addition in next patches, split the code as follows: - generic code (read/write/setup) is being kept in pvpanic.c - ISA dependent code moved to pvpanic-isa.c Also, rename: - ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE. - TYPE_PVPANIC -> TYPE_PVPANIC_ISA. - MemoryRegion io -> mr. - pvpanic_ioport_* in pvpanic_*. Update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/pvpanic.h | 23 +++++++++- hw/misc/pvpanic-isa.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/pvpanic.c | 85 +++-------------------------------- hw/i386/Kconfig | 2 +- hw/misc/Kconfig | 6 ++- hw/misc/meson.build | 3 +- tests/qtest/meson.build | 2 +- 7 files changed, 130 insertions(+), 85 deletions(-) create mode 100644 hw/misc/pvpanic-isa.c diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" -#define TYPE_PVPANIC "pvpanic" +#define TYPE_PVPANIC_ISA_DEVICE "pvpanic" #define PVPANIC_IOPORT_PROP "ioport" +/* The bit of supported pv event, TODO: include uapi header and remove this */ +#define PVPANIC_F_PANICKED 0 +#define PVPANIC_F_CRASHLOADED 1 + +/* The pv event value */ +#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) +#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) + +/* + * PVPanicState for any device type + */ +typedef struct PVPanicState PVPanicState; +struct PVPanicState { + MemoryRegion mr; + uint8_t events; +}; + +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size); + static inline uint16_t pvpanic_port(void) { - Object *o = object_resolve_path_type("", TYPE_PVPANIC, NULL); + Object *o = object_resolve_path_type("", TYPE_PVPANIC_ISA_DEVICE, NULL); if (!o) { return 0; } diff --git a/hw/misc/pvpanic-isa.c b/hw/misc/pvpanic-isa.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-isa.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated pvpanic device. + * + * Copyright Fujitsu, Corp. 2013 + * + * Authors: + * Wen Congyang <wency@cn.fujitsu.com> + * Hu Tao <hutao@cn.fujitsu.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/isa/isa.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicISAState, PVPANIC_ISA_DEVICE) + +/* + * PVPanicISAState for ISA device and + * use ioport. + */ +struct PVPanicISAState { + ISADevice parent_obj; + + uint16_t ioport; + PVPanicState pvpanic; +}; + +static void pvpanic_isa_initfn(Object *obj) +{ + PVPanicISAState *s = PVPANIC_ISA_DEVICE(obj); + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 1); +} + +static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) +{ + ISADevice *d = ISA_DEVICE(dev); + PVPanicISAState *s = PVPANIC_ISA_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + FWCfgState *fw_cfg = fw_cfg_find(); + uint16_t *pvpanic_port; + + if (!fw_cfg) { + return; + } + + pvpanic_port = g_malloc(sizeof(*pvpanic_port)); + *pvpanic_port = cpu_to_le16(s->ioport); + fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, + sizeof(*pvpanic_port)); + + isa_register_ioport(d, &ps->mr, s->ioport); +} + +static Property pvpanic_isa_properties[] = { + DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicISAState, ioport, 0x505), + DEFINE_PROP_UINT8("events", PVPanicISAState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_isa_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pvpanic_isa_realizefn; + device_class_set_props(dc, pvpanic_isa_properties); + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_isa_info = { + .name = TYPE_PVPANIC_ISA_DEVICE, + .parent = TYPE_ISA_DEVICE, + .instance_size = sizeof(PVPanicISAState), + .instance_init = pvpanic_isa_initfn, + .class_init = pvpanic_isa_class_init, +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_isa_info); +} + +type_init(pvpanic_register_types) diff --git a/hw/misc/pvpanic.c b/hw/misc/pvpanic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pvpanic.c +++ b/hw/misc/pvpanic.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pvpanic.h" #include "qom/object.h" -/* The bit of supported pv event, TODO: include uapi header and remove this */ -#define PVPANIC_F_PANICKED 0 -#define PVPANIC_F_CRASHLOADED 1 - -/* The pv event value */ -#define PVPANIC_PANICKED (1 << PVPANIC_F_PANICKED) -#define PVPANIC_CRASHLOADED (1 << PVPANIC_F_CRASHLOADED) - -typedef struct PVPanicState PVPanicState; -DECLARE_INSTANCE_CHECKER(PVPanicState, ISA_PVPANIC_DEVICE, - TYPE_PVPANIC) - static void handle_event(int event) { static bool logged; @@ -XXX,XX +XXX,XX @@ static void handle_event(int event) } } -#include "hw/isa/isa.h" - -struct PVPanicState { - ISADevice parent_obj; - - MemoryRegion io; - uint16_t ioport; - uint8_t events; -}; - /* return supported events on read */ -static uint64_t pvpanic_ioport_read(void *opaque, hwaddr addr, unsigned size) +static uint64_t pvpanic_read(void *opaque, hwaddr addr, unsigned size) { PVPanicState *pvp = opaque; return pvp->events; } -static void pvpanic_ioport_write(void *opaque, hwaddr addr, uint64_t val, +static void pvpanic_write(void *opaque, hwaddr addr, uint64_t val, unsigned size) { handle_event(val); } static const MemoryRegionOps pvpanic_ops = { - .read = pvpanic_ioport_read, - .write = pvpanic_ioport_write, + .read = pvpanic_read, + .write = pvpanic_write, .impl = { .min_access_size = 1, .max_access_size = 1, }, }; -static void pvpanic_isa_initfn(Object *obj) +void pvpanic_setup_io(PVPanicState *s, DeviceState *dev, unsigned size) { - PVPanicState *s = ISA_PVPANIC_DEVICE(obj); - - memory_region_init_io(&s->io, OBJECT(s), &pvpanic_ops, s, "pvpanic", 1); + memory_region_init_io(&s->mr, OBJECT(dev), &pvpanic_ops, s, "pvpanic", size); } - -static void pvpanic_isa_realizefn(DeviceState *dev, Error **errp) -{ - ISADevice *d = ISA_DEVICE(dev); - PVPanicState *s = ISA_PVPANIC_DEVICE(dev); - FWCfgState *fw_cfg = fw_cfg_find(); - uint16_t *pvpanic_port; - - if (!fw_cfg) { - return; - } - - pvpanic_port = g_malloc(sizeof(*pvpanic_port)); - *pvpanic_port = cpu_to_le16(s->ioport); - fw_cfg_add_file(fw_cfg, "etc/pvpanic-port", pvpanic_port, - sizeof(*pvpanic_port)); - - isa_register_ioport(d, &s->io, s->ioport); -} - -static Property pvpanic_isa_properties[] = { - DEFINE_PROP_UINT16(PVPANIC_IOPORT_PROP, PVPanicState, ioport, 0x505), - DEFINE_PROP_UINT8("events", PVPanicState, events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), - DEFINE_PROP_END_OF_LIST(), -}; - -static void pvpanic_isa_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->realize = pvpanic_isa_realizefn; - device_class_set_props(dc, pvpanic_isa_properties); - set_bit(DEVICE_CATEGORY_MISC, dc->categories); -} - -static TypeInfo pvpanic_isa_info = { - .name = TYPE_PVPANIC, - .parent = TYPE_ISA_DEVICE, - .instance_size = sizeof(PVPanicState), - .instance_init = pvpanic_isa_initfn, - .class_init = pvpanic_isa_class_init, -}; - -static void pvpanic_register_types(void) -{ - type_register_static(&pvpanic_isa_info); -} - -type_init(pvpanic_register_types) diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/Kconfig +++ b/hw/i386/Kconfig @@ -XXX,XX +XXX,XX @@ config PC imply ISA_DEBUG imply PARALLEL imply PCI_DEVICES - imply PVPANIC + imply PVPANIC_ISA imply QXL imply SEV imply SGA diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSCTL config IOTKIT_SYSINFO bool -config PVPANIC +config PVPANIC_COMMON + bool + +config PVPANIC_ISA bool depends on ISA_BUS + select PVPANIC_COMMON config AUX bool diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_COMMON', if_true: files('pvpanic.c')) # ARM devices softmmu_ss.add(when: 'CONFIG_PL310', if_true: files('arm_l2x0.c')) @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_IOTKIT_SYSINFO', if_true: files('iotkit-sysinfo.c') softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) -softmmu_ss.add(when: 'CONFIG_PVPANIC', if_true: files('pvpanic.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ (config_host.has_key('CONFIG_LINUX') and \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ - (config_all_devices.has_key('CONFIG_PVPANIC') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add PCI interface support for PVPANIC device. Create a new file pvpanic-pci.c where the PCI specific routines reside and update the build system with the new files and config structure. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pci-ids.txt | 1 + include/hw/misc/pvpanic.h | 1 + include/hw/pci/pci.h | 1 + hw/misc/pvpanic-pci.c | 94 +++++++++++++++++++++++++++++++++++++++ hw/misc/Kconfig | 6 +++ hw/misc/meson.build | 1 + 6 files changed, 104 insertions(+) create mode 100644 hw/misc/pvpanic-pci.c diff --git a/docs/specs/pci-ids.txt b/docs/specs/pci-ids.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pci-ids.txt +++ b/docs/specs/pci-ids.txt @@ -XXX,XX +XXX,XX @@ PCI devices (other than virtio): 1b36:000d PCI xhci usb host adapter 1b36:000f mdpy (mdev sample device), linux/samples/vfio-mdev/mdpy.c 1b36:0010 PCIe NVMe device (-device nvme) +1b36:0011 PCI PVPanic device (-device pvpanic-pci) All these devices are documented in docs/specs. diff --git a/include/hw/misc/pvpanic.h b/include/hw/misc/pvpanic.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/pvpanic.h +++ b/include/hw/misc/pvpanic.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_PVPANIC_ISA_DEVICE "pvpanic" +#define TYPE_PVPANIC_PCI_DEVICE "pvpanic-pci" #define PVPANIC_IOPORT_PROP "ioport" diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci/pci.h +++ b/include/hw/pci/pci.h @@ -XXX,XX +XXX,XX @@ extern bool pci_available; #define PCI_DEVICE_ID_REDHAT_PCIE_BRIDGE 0x000e #define PCI_DEVICE_ID_REDHAT_MDPY 0x000f #define PCI_DEVICE_ID_REDHAT_NVME 0x0010 +#define PCI_DEVICE_ID_REDHAT_PVPANIC 0x0011 #define PCI_DEVICE_ID_REDHAT_QXL 0x0100 #define FMT_PCIBUS PRIx64 diff --git a/hw/misc/pvpanic-pci.c b/hw/misc/pvpanic-pci.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/pvpanic-pci.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU simulated PCI pvpanic device. + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/module.h" +#include "sysemu/runstate.h" + +#include "hw/nvram/fw_cfg.h" +#include "hw/qdev-properties.h" +#include "migration/vmstate.h" +#include "hw/misc/pvpanic.h" +#include "qom/object.h" +#include "hw/pci/pci.h" + +OBJECT_DECLARE_SIMPLE_TYPE(PVPanicPCIState, PVPANIC_PCI_DEVICE) + +/* + * PVPanicPCIState for PCI device + */ +typedef struct PVPanicPCIState { + PCIDevice dev; + PVPanicState pvpanic; +} PVPanicPCIState; + +static const VMStateDescription vmstate_pvpanic_pci = { + .name = "pvpanic-pci", + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_PCI_DEVICE(dev, PVPanicPCIState), + VMSTATE_END_OF_LIST() + } +}; + +static void pvpanic_pci_realizefn(PCIDevice *dev, Error **errp) +{ + PVPanicPCIState *s = PVPANIC_PCI_DEVICE(dev); + PVPanicState *ps = &s->pvpanic; + + pvpanic_setup_io(&s->pvpanic, DEVICE(s), 2); + + pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &ps->mr); +} + +static Property pvpanic_pci_properties[] = { + DEFINE_PROP_UINT8("events", PVPanicPCIState, pvpanic.events, PVPANIC_PANICKED | PVPANIC_CRASHLOADED), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pvpanic_pci_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pc = PCI_DEVICE_CLASS(klass); + + device_class_set_props(dc, pvpanic_pci_properties); + + pc->realize = pvpanic_pci_realizefn; + pc->vendor_id = PCI_VENDOR_ID_REDHAT; + pc->device_id = PCI_DEVICE_ID_REDHAT_PVPANIC; + pc->revision = 1; + pc->class_id = PCI_CLASS_SYSTEM_OTHER; + dc->vmsd = &vmstate_pvpanic_pci; + + set_bit(DEVICE_CATEGORY_MISC, dc->categories); +} + +static TypeInfo pvpanic_pci_info = { + .name = TYPE_PVPANIC_PCI_DEVICE, + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(PVPanicPCIState), + .class_init = pvpanic_pci_class_init, + .interfaces = (InterfaceInfo[]) { + { INTERFACE_CONVENTIONAL_PCI_DEVICE }, + { } + } +}; + +static void pvpanic_register_types(void) +{ + type_register_static(&pvpanic_pci_info); +} + +type_init(pvpanic_register_types); diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -XXX,XX +XXX,XX @@ config IOTKIT_SYSINFO config PVPANIC_COMMON bool +config PVPANIC_PCI + bool + default y if PCI_DEVICES + depends on PCI + select PVPANIC_COMMON + config PVPANIC_ISA bool depends on ISA_BUS diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_ARMSSE_CPUID', if_true: files('armsse-cpuid.c')) softmmu_ss.add(when: 'CONFIG_ARMSSE_MHU', if_true: files('armsse-mhu.c')) softmmu_ss.add(when: 'CONFIG_PVPANIC_ISA', if_true: files('pvpanic-isa.c')) +softmmu_ss.add(when: 'CONFIG_PVPANIC_PCI', if_true: files('pvpanic-pci.c')) softmmu_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) softmmu_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_scu.c', 'aspeed_sdmc.c', 'aspeed_xdma.c')) softmmu_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-sysreg.c')) -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add pvpanic PCI device support details in docs/specs/pvpanic.txt. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/specs/pvpanic.txt | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/docs/specs/pvpanic.txt b/docs/specs/pvpanic.txt index XXXXXXX..XXXXXXX 100644 --- a/docs/specs/pvpanic.txt +++ b/docs/specs/pvpanic.txt @@ -XXX,XX +XXX,XX @@ PVPANIC DEVICE ============== -pvpanic device is a simulated ISA device, through which a guest panic +pvpanic device is a simulated device, through which a guest panic event is sent to qemu, and a QMP event is generated. This allows management apps (e.g. libvirt) to be notified and respond to the event. @@ -XXX,XX +XXX,XX @@ The management app has the option of waiting for GUEST_PANICKED events, and/or polling for guest-panicked RunState, to learn when the pvpanic device has fired a panic event. +The pvpanic device can be implemented as an ISA device (using IOPORT) or as a +PCI device. + ISA Interface ------------- @@ -XXX,XX +XXX,XX @@ bit 1: a guest panic has happened and will be handled by the guest; the host should record it or report it, but should not affect the execution of the guest. +PCI Interface +------------- + +The PCI interface is similar to the ISA interface except that it uses an MMIO +address space provided by its BAR0, 1 byte long. Any machine with a PCI bus +can enable a pvpanic device by adding '-device pvpanic-pci' to the command +line. + ACPI Interface -------------- -- 2.20.1 From: Mihai Carabas <mihai.carabas@oracle.com> Add a test case for pvpanic-pci device. The scenario is the same as pvpanic ISA device, but is using the PCI bus. Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/pvpanic-pci-test.c | 94 ++++++++++++++++++++++++++++++++++ tests/qtest/meson.build | 1 + 2 files changed, 95 insertions(+) create mode 100644 tests/qtest/pvpanic-pci-test.c diff --git a/tests/qtest/pvpanic-pci-test.c b/tests/qtest/pvpanic-pci-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/pvpanic-pci-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for PV Panic PCI device + * + * Copyright (C) 2020 Oracle + * + * Authors: + * Mihai Carabas <mihai.carabas@oracle.com> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "libqos/libqtest.h" +#include "qapi/qmp/qdict.h" +#include "libqos/pci.h" +#include "libqos/pci-pc.h" +#include "hw/pci/pci_regs.h" + +static void test_panic_nopause(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=none"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "run"); + qobject_unref(response); + + qtest_quit(qts); +} + +static void test_panic(void) +{ + uint8_t val; + QDict *response, *data; + QTestState *qts; + QPCIBus *pcibus; + QPCIDevice *dev; + QPCIBar bar; + + qts = qtest_init("-device pvpanic-pci,addr=04.0 -action panic=pause"); + pcibus = qpci_new_pc(qts, NULL); + dev = qpci_device_find(pcibus, QPCI_DEVFN(0x4, 0x0)); + qpci_device_enable(dev); + bar = qpci_iomap(dev, 0, NULL); + + qpci_memread(dev, bar, 0, &val, sizeof(val)); + g_assert_cmpuint(val, ==, 3); + + val = 1; + qpci_memwrite(dev, bar, 0, &val, sizeof(val)); + + response = qtest_qmp_eventwait_ref(qts, "GUEST_PANICKED"); + g_assert(qdict_haskey(response, "data")); + data = qdict_get_qdict(response, "data"); + g_assert(qdict_haskey(data, "action")); + g_assert_cmpstr(qdict_get_str(data, "action"), ==, "pause"); + qobject_unref(response); + + qtest_quit(qts); +} + +int main(int argc, char **argv) +{ + int ret; + + g_test_init(&argc, &argv, NULL); + qtest_add_func("/pvpanic-pci/panic", test_panic); + qtest_add_func("/pvpanic-pci/panic-nopause", test_panic_nopause); + + ret = g_test_run(); + + return ret; +} diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_i386 = \ config_all_devices.has_key('CONFIG_ISA_IPMI_BT') ? ['ipmi-bt-test'] : []) + \ (config_all_devices.has_key('CONFIG_WDT_IB700') ? ['wdt_ib700-test'] : []) + \ (config_all_devices.has_key('CONFIG_PVPANIC_ISA') ? ['pvpanic-test'] : []) + \ + (config_all_devices.has_key('CONFIG_PVPANIC_PCI') ? ['pvpanic-pci-test'] : []) + \ (config_all_devices.has_key('CONFIG_HDA') ? ['intel-hda-test'] : []) + \ (config_all_devices.has_key('CONFIG_I82801B11') ? ['i82801b11-test'] : []) + \ (config_all_devices.has_key('CONFIG_IOH3420') ? ['ioh3420-test'] : []) + \ -- 2.20.1 The ptimer API currently provides two methods for setting the period: ptimer_set_period(), which takes a period in nanoseconds, and ptimer_set_freq(), which takes a frequency in Hz. Neither of these lines up nicely with the Clock API, because although both the Clock and the ptimer track the frequency using a representation of whole and fractional nanoseconds, conversion via either period-in-ns or frequency-in-Hz will introduce a rounding error. Add a new function ptimer_set_period_from_clock() which takes the Clock object directly to avoid the rounding issues. This includes a facility for the user to specify that there is a frequency divider between the Clock proper and the timer, as some timer devices like the CMSDK APB dualtimer need this. To avoid having to drag in clock.h from ptimer.h we add the Clock type to typedefs.h. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-2-peter.maydell@linaro.org Message-id: 20210121190622.22000-2-peter.maydell@linaro.org --- include/hw/ptimer.h | 22 ++++++++++++++++++++++ include/qemu/typedefs.h | 1 + hw/core/ptimer.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) diff --git a/include/hw/ptimer.h b/include/hw/ptimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ptimer.h +++ b/include/hw/ptimer.h @@ -XXX,XX +XXX,XX @@ void ptimer_transaction_commit(ptimer_state *s); */ void ptimer_set_period(ptimer_state *s, int64_t period); +/** + * ptimer_set_period_from_clock - Set counter increment from a Clock + * @s: ptimer to configure + * @clk: pointer to Clock object to take period from + * @divisor: value to scale the clock frequency down by + * + * If the ptimer is being driven from a Clock, this is the preferred + * way to tell the ptimer about the period, because it avoids any + * possible rounding errors that might happen if the internal + * representation of the Clock period was converted to either a period + * in ns or a frequency in Hz. + * + * If the ptimer should run at the same frequency as the clock, + * pass 1 as the @divisor; if the ptimer should run at half the + * frequency, pass 2, and so on. + * + * This function will assert if it is called outside a + * ptimer_transaction_begin/commit block. + */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clock, + unsigned int divisor); + /** * ptimer_set_freq - Set counter frequency in Hz * @s: ptimer to configure diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index XXXXXXX..XXXXXXX 100644 --- a/include/qemu/typedefs.h +++ b/include/qemu/typedefs.h @@ -XXX,XX +XXX,XX @@ typedef struct BlockDriverState BlockDriverState; typedef struct BusClass BusClass; typedef struct BusState BusState; typedef struct Chardev Chardev; +typedef struct Clock Clock; typedef struct CompatProperty CompatProperty; typedef struct CoMutex CoMutex; typedef struct CPUAddressSpace CPUAddressSpace; diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/ptimer.c +++ b/hw/core/ptimer.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/qtest.h" #include "block/aio.h" #include "sysemu/cpus.h" +#include "hw/clock.h" #define DELTA_ADJUST 1 #define DELTA_NO_ADJUST -1 @@ -XXX,XX +XXX,XX @@ void ptimer_set_period(ptimer_state *s, int64_t period) } } +/* Set counter increment interval from a Clock */ +void ptimer_set_period_from_clock(ptimer_state *s, const Clock *clk, + unsigned int divisor) +{ + /* + * The raw clock period is a 64-bit value in units of 2^-32 ns; + * put another way it's a 32.32 fixed-point ns value. Our internal + * representation of the period is 64.32 fixed point ns, so + * the conversion is simple. + */ + uint64_t raw_period = clock_get(clk); + uint64_t period_frac; + + assert(s->in_transaction); + s->delta = ptimer_get_count(s); + s->period = extract64(raw_period, 32, 32); + period_frac = extract64(raw_period, 0, 32); + /* + * divisor specifies a possible frequency divisor between the + * clock and the timer, so it is a multiplier on the period. + * We do the multiply after splitting the raw period out into + * period and frac to avoid having to do a 32*64->96 multiply. + */ + s->period *= divisor; + period_frac *= divisor; + s->period += extract64(period_frac, 32, 32); + s->period_frac = (uint32_t)period_frac; + + if (s->enabled) { + s->need_reload = true; + } +} + /* Set counter frequency in Hz. */ void ptimer_set_freq(ptimer_state *s, uint32_t freq) { -- 2.20.1 Add a function for checking whether a clock has a source. This is useful for devices which have input clocks that must be wired up by the board as it allows them to fail in realize rather than ploughing on with a zero-period clock. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-3-peter.maydell@linaro.org Message-id: 20210121190622.22000-3-peter.maydell@linaro.org --- docs/devel/clocks.rst | 16 ++++++++++++++++ include/hw/clock.h | 15 +++++++++++++++ 2 files changed, 31 insertions(+) diff --git a/docs/devel/clocks.rst b/docs/devel/clocks.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/clocks.rst +++ b/docs/devel/clocks.rst @@ -XXX,XX +XXX,XX @@ object during device instance init. For example: /* set initial value to 10ns / 100MHz */ clock_set_ns(clk, 10); +To enforce that the clock is wired up by the board code, you can +call ``clock_has_source()`` in your device's realize method: + +.. code-block:: c + + if (!clock_has_source(s->clk)) { + error_setg(errp, "MyDevice: clk input must be connected"); + return; + } + +Note that this only checks that the clock has been wired up; it is +still possible that the output clock connected to it is disabled +or has not yet been configured, in which case the period will be +zero. You should use the clock callback to find out when the clock +period changes. + Fetching clock frequency/period ------------------------------- diff --git a/include/hw/clock.h b/include/hw/clock.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/clock.h +++ b/include/hw/clock.h @@ -XXX,XX +XXX,XX @@ void clock_clear_callback(Clock *clk); */ void clock_set_source(Clock *clk, Clock *src); +/** + * clock_has_source: + * @clk: the clock + * + * Returns true if the clock has a source clock connected to it. + * This is useful for devices which have input clocks which must + * be connected by the board/SoC code which creates them. The + * device code can use this to check in its realize method that + * the clock has been connected. + */ +static inline bool clock_has_source(const Clock *clk) +{ + return clk->source != NULL; +} + /** * clock_set: * @clk: the clock to initialize. -- 2.20.1 Add a simple test of the CMSDK APB timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-4-peter.maydell@linaro.org Message-id: 20210121190622.22000-4-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-timer-test.c | 75 ++++++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 77 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-timer-test.c diff --git a/tests/qtest/cmsdk-apb-timer-test.c b/tests/qtest/cmsdk-apb-timer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-timer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB timer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE-200 timer0; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40000000 + +#define CTRL 0 +#define VALUE 4 +#define RELOAD 8 +#define INTSTATUS 0xc + +static void test_timer(void) +{ + g_assert_true(readl(TIMER_BASE + INTSTATUS) == 0); + + /* Start timer: will fire after 40 * 1000 == 40000 ns */ + writel(TIMER_BASE + RELOAD, 1000); + writel(TIMER_BASE + CTRL, 9); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 500 + 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 0); + + /* VALUE reloads at the following tick */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + VALUE), ==, 1000); + + /* Check write-1-to-clear behaviour of INTSTATUS */ + writel(TIMER_BASE + INTSTATUS, 0); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 1); + writel(TIMER_BASE + INTSTATUS, 1); + g_assert_cmpuint(readl(TIMER_BASE + INTSTATUS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + CTRL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-timer/timer", test_timer); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/rtc/pl031.h F: include/hw/arm/primecell.h F: hw/timer/cmsdk-apb-timer.c F: include/hw/timer/cmsdk-apb-timer.h +F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h F: hw/char/cmsdk-apb-uart.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK watchdog, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-5-peter.maydell@linaro.org Message-id: 20210121190622.22000-5-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- tests/qtest/cmsdk-apb-watchdog-test.c | 79 +++++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 81 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-watchdog-test.c diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB watchdog device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + */ +#define WDOG_BASE 0x40000000 + +#define WDOGLOAD 0 +#define WDOGVALUE 4 +#define WDOGCONTROL 8 +#define WDOGINTCLR 0xc +#define WDOGRIS 0x10 +#define WDOGMIS 0x14 +#define WDOGLOCK 0xc00 + +static void test_watchdog(void) +{ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(500 * 80 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(500 * 80); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine lm3s811evb"); + + qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c F: include/hw/watchdog/cmsdk-apb-watchdog.h +F: tests/qtest/cmsdk-apb-watchdog-test.c F: hw/misc/tz-ppc.c F: include/hw/misc/tz-ppc.h F: hw/misc/tz-mpc.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_watchdog_timer-test'] qtests_arm = \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_NPCM7XX') ? qtests_npcm7xx : []) + \ ['arm-cpu-features', -- 2.20.1 Add a simple test of the CMSDK dual timer, since we're about to do some refactoring of how it is clocked. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-6-peter.maydell@linaro.org Message-id: 20210121190622.22000-6-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-dualtimer-test.c | 130 +++++++++++++++++++++++++ MAINTAINERS | 1 + tests/qtest/meson.build | 1 + 3 files changed, 132 insertions(+) create mode 100644 tests/qtest/cmsdk-apb-dualtimer-test.c diff --git a/tests/qtest/cmsdk-apb-dualtimer-test.c b/tests/qtest/cmsdk-apb-dualtimer-test.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/tests/qtest/cmsdk-apb-dualtimer-test.c @@ -XXX,XX +XXX,XX @@ +/* + * QTest testcase for the CMSDK APB dualtimer device + * + * Copyright (c) 2021 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "libqtest-single.h" + +/* IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick */ +#define TIMER_BASE 0x40002000 + +#define TIMER1LOAD 0 +#define TIMER1VALUE 4 +#define TIMER1CONTROL 8 +#define TIMER1INTCLR 0xc +#define TIMER1RIS 0x10 +#define TIMER1MIS 0x14 +#define TIMER1BGLOAD 0x18 + +#define TIMER2LOAD 0x20 +#define TIMER2VALUE 0x24 +#define TIMER2CONTROL 0x28 +#define TIMER2INTCLR 0x2c +#define TIMER2RIS 0x30 +#define TIMER2MIS 0x34 +#define TIMER2BGLOAD 0x38 + +#define CTRL_ENABLE (1 << 7) +#define CTRL_PERIODIC (1 << 6) +#define CTRL_INTEN (1 << 5) +#define CTRL_PRESCALE_1 (0 << 2) +#define CTRL_PRESCALE_16 (1 << 2) +#define CTRL_PRESCALE_256 (2 << 2) +#define CTRL_32BIT (1 << 1) +#define CTRL_ONESHOT (1 << 0) + +static void test_dualtimer(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER1RIS) == 0); + + /* Start timer: will fire after 40000 ns */ + writel(TIMER_BASE + TIMER1LOAD, 1000); + /* enable in free-running, wrapping, interrupt mode */ + writel(TIMER_BASE + TIMER1CONTROL, CTRL_ENABLE | CTRL_INTEN); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(500 * 40 + 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(500 * 40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0); + + /* + * We are in free-running wrapping 16-bit mode, so on the following + * tick VALUE should have wrapped round to 0xffff. + */ + clock_step(40); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1VALUE), ==, 0xffff); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER1INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER1RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER1CONTROL, 0); +} + +static void test_prescale(void) +{ + g_assert_true(readl(TIMER_BASE + TIMER2RIS) == 0); + + /* Start timer: will fire after 40 * 256 * 1000 == 1024000 ns */ + writel(TIMER_BASE + TIMER2LOAD, 1000); + /* enable in periodic, wrapping, interrupt mode, prescale 256 */ + writel(TIMER_BASE + TIMER2CONTROL, + CTRL_ENABLE | CTRL_INTEN | CTRL_PERIODIC | CTRL_PRESCALE_256); + + /* Step to just past the 500th tick and check VALUE */ + clock_step(40 * 256 * 501); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 500); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 256 * 500); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 0); + + /* In periodic mode the tick VALUE now reloads */ + clock_step(40 * 256); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2VALUE), ==, 1000); + + /* Check that any write to INTCLR clears interrupt */ + writel(TIMER_BASE + TIMER2INTCLR, 1); + g_assert_cmpuint(readl(TIMER_BASE + TIMER2RIS), ==, 0); + + /* Turn off the timer */ + writel(TIMER_BASE + TIMER2CONTROL, 0); +} + +int main(int argc, char **argv) +{ + int r; + + g_test_init(&argc, &argv, NULL); + + qtest_start("-machine mps2-an385"); + + qtest_add_func("/cmsdk-apb-dualtimer/dualtimer", test_dualtimer); + qtest_add_func("/cmsdk-apb-dualtimer/prescale", test_prescale); + + r = g_test_run(); + + qtest_end(); + + return r; +} diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/timer/cmsdk-apb-timer.h F: tests/qtest/cmsdk-apb-timer-test.c F: hw/timer/cmsdk-apb-dualtimer.c F: include/hw/timer/cmsdk-apb-dualtimer.h +F: tests/qtest/cmsdk-apb-dualtimer-test.c F: hw/char/cmsdk-apb-uart.c F: include/hw/char/cmsdk-apb-uart.h F: hw/watchdog/cmsdk-apb-watchdog.c diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -XXX,XX +XXX,XX @@ qtests_npcm7xx = \ 'npcm7xx_timer-test', 'npcm7xx_watchdog_timer-test'] qtests_arm = \ + (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') ? ['pflash-cfi02-test'] : []) + \ -- 2.20.1 The state struct for the CMSDK APB timer device doesn't follow our usual naming convention of camelcase -- "CMSDK" and "APB" are both acronyms, but "TIMER" is not so should not be all-uppercase. Globally rename the struct to "CMSDKAPBTimer" (bringing it into line with CMSDKAPBWatchdog and CMSDKAPBDualTimer; CMSDKAPBUART remains as-is because "UART" is an acronym). Commit created with: perl -p -i -e 's/CMSDKAPBTIMER/CMSDKAPBTimer/g' hw/timer/cmsdk-apb-timer.c include/hw/arm/armsse.h include/hw/timer/cmsdk-apb-timer.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-7-peter.maydell@linaro.org Message-id: 20210121190622.22000-7-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 +++--- include/hw/timer/cmsdk-apb-timer.h | 4 ++-- hw/timer/cmsdk-apb-timer.c | 28 ++++++++++++++-------------- 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ struct ARMSSE { TZPPC apb_ppc0; TZPPC apb_ppc1; TZMPC mpc[IOTS_NUM_MPC]; - CMSDKAPBTIMER timer0; - CMSDKAPBTIMER timer1; - CMSDKAPBTIMER s32ktimer; + CMSDKAPBTimer timer0; + CMSDKAPBTimer timer1; + CMSDKAPBTimer s32ktimer; qemu_or_irq ppc_irq_orgate; SplitIRQ sec_resp_splitter; SplitIRQ ppc_irq_splitter[NUM_PPCS]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" -OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTIMER, CMSDK_APB_TIMER) +OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) -struct CMSDKAPBTIMER { +struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const int timer_id[] = { 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ }; -static void cmsdk_apb_timer_update(CMSDKAPBTIMER *s) +static void cmsdk_apb_timer_update(CMSDKAPBTimer *s) { qemu_set_irq(s->timerint, !!(s->intstatus & R_INTSTATUS_IRQ_MASK)); } static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); uint64_t r; switch (offset) { @@ -XXX,XX +XXX,XX @@ static uint64_t cmsdk_apb_timer_read(void *opaque, hwaddr offset, unsigned size) static void cmsdk_apb_timer_write(void *opaque, hwaddr offset, uint64_t value, unsigned size) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); trace_cmsdk_apb_timer_write(offset, value, size); @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps cmsdk_apb_timer_ops = { static void cmsdk_apb_timer_tick(void *opaque) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(opaque); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); if (s->ctrl & R_CTRL_IRQEN_MASK) { s->intstatus |= R_INTSTATUS_IRQ_MASK; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_tick(void *opaque) static void cmsdk_apb_timer_reset(DeviceState *dev) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); trace_cmsdk_apb_timer_reset(); s->ctrl = 0; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(obj); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(obj); memory_region_init_io(&s->iomem, obj, &cmsdk_apb_timer_ops, s, "cmsdk-apb-timer", 0x1000); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { - CMSDKAPBTIMER *s = CMSDK_APB_TIMER(dev); + CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); if (s->pclk_frq == 0) { error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { .version_id = 1, .minimum_version_id = 1, .fields = (VMStateField[]) { - VMSTATE_PTIMER(timer, CMSDKAPBTIMER), - VMSTATE_UINT32(ctrl, CMSDKAPBTIMER), - VMSTATE_UINT32(value, CMSDKAPBTIMER), - VMSTATE_UINT32(reload, CMSDKAPBTIMER), - VMSTATE_UINT32(intstatus, CMSDKAPBTIMER), + VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_UINT32(ctrl, CMSDKAPBTimer), + VMSTATE_UINT32(value, CMSDKAPBTimer), + VMSTATE_UINT32(reload, CMSDKAPBTimer), + VMSTATE_UINT32(intstatus, CMSDKAPBTimer), VMSTATE_END_OF_LIST() } }; static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTIMER, pclk_frq, 0), + DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), DEFINE_PROP_END_OF_LIST(), }; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) static const TypeInfo cmsdk_apb_timer_info = { .name = TYPE_CMSDK_APB_TIMER, .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(CMSDKAPBTIMER), + .instance_size = sizeof(CMSDKAPBTimer), .instance_init = cmsdk_apb_timer_init, .class_init = cmsdk_apb_timer_class_init, }; -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. Since the device doesn't already have a doc comment for its "QEMU interface", we add one including the new Clock. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-8-peter.maydell@linaro.org Message-id: 20210121190622.22000-8-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 9 +++++++++ hw/timer/cmsdk-apb-timer.c | 7 +++++-- 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ #include "hw/qdev-properties.h" #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_TIMER "cmsdk-apb-timer" OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) +/* + * QEMU interface: + * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "pclk": clock for the timer + * + sysbus MMIO region 0: the register bank + * + sysbus IRQ 0: timer interrupt TIMERINT + */ struct CMSDKAPBTimer { /*< private >*/ SysBusDevice parent_obj; @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { qemu_irq timerint; uint32_t pclk_frq; struct ptimer_state *timer; + Clock *pclk; uint32_t ctrl; uint32_t value; diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/irq.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-timer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_timer_vmstate = { .name = "cmsdk-apb-timer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_PTIMER(timer, CMSDKAPBTimer), + VMSTATE_CLOCK(pclk, CMSDKAPBTimer), VMSTATE_UINT32(ctrl, CMSDKAPBTimer), VMSTATE_UINT32(value, CMSDKAPBTimer), VMSTATE_UINT32(reload, CMSDKAPBTimer), -- 2.20.1 As the first step in converting the CMSDK_APB_DUALTIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the pclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. We take the opportunity to correct the name of the clock input to match the hardware -- the dual timer names the clock which drives the timers TIMCLK. (It does also have a 'pclk' input, which is used only for the register and APB bus logic; on the SSE-200 these clocks are both connected together.) This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-9-peter.maydell@linaro.org Message-id: 20210121190622.22000-9-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-dualtimer.h | 3 +++ hw/timer/cmsdk-apb-dualtimer.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "pclk-frq": frequency at which the timer is clocked + * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC * + sysbus IRO 1: timer block 1 interrupt TIMINT1 @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_DUALTIMER "cmsdk-apb-dualtimer" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { MemoryRegion iomem; qemu_irq timerintc; uint32_t pclk_frq; + Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; uint32_t timeritcr; diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/timer/cmsdk-apb-dualtimer.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_dualtimermod_vmstate = { static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { .name = "cmsdk-apb-dualtimer", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, CMSDK_APB_DUALTIMER_NUM_MODULES, 1, cmsdk_dualtimermod_vmstate, -- 2.20.1 As the first step in converting the CMSDK_APB_TIMER device to the Clock framework, add a Clock input. For the moment we do nothing with this clock; we will change the behaviour from using the wdogclk-frq property to using the Clock once all the users of this device have been converted to wire up the Clock. This is a migration compatibility break for machines mps2-an385, mps2-an386, mps2-an500, mps2-an511, mps2-an505, mps2-an521, musca-a, musca-b1, lm3s811evb, lm3s6965evb. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-10-peter.maydell@linaro.org Message-id: 20210121190622.22000-10-peter.maydell@linaro.org --- include/hw/watchdog/cmsdk-apb-watchdog.h | 3 +++ hw/watchdog/cmsdk-apb-watchdog.c | 7 +++++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * * QEMU interface: * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked + * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt * @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/ptimer.h" +#include "hw/clock.h" #include "qom/object.h" #define TYPE_CMSDK_APB_WATCHDOG "cmsdk-apb-watchdog" @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; + Clock *wdogclk; uint32_t control; uint32_t intstatus; diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ #include "hw/irq.h" #include "hw/qdev-properties.h" #include "hw/registerfields.h" +#include "hw/qdev-clock.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) static const VMStateDescription cmsdk_apb_watchdog_vmstate = { .name = "cmsdk-apb-watchdog", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(wdogclk, CMSDKAPBWatchdog), VMSTATE_PTIMER(timer, CMSDKAPBWatchdog), VMSTATE_UINT32(control, CMSDKAPBWatchdog), VMSTATE_UINT32(intstatus, CMSDKAPBWatchdog), -- 2.20.1 While we transition the ARMSSE code from integer properties specifying clock frequencies to Clock objects, we want to have the device provide both at once. We want the final name of the main input Clock to be "MAINCLK", following the hardware name. Unfortunately creating an input Clock with a name X creates an under-the-hood QOM property X; for "MAINCLK" this clashes with the existing UINT32 property of that name. Rename the UINT32 property to MAINCLK_FRQ so it can coexist with the MAINCLK Clock; once the transition is complete MAINCLK_FRQ will be deleted. Commit created with: perl -p -i -e 's/MAINCLK/MAINCLK_FRQ/g' hw/arm/{armsse,mps2-tz,musca}.c include/hw/arm/armsse.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-11-peter.maydell@linaro.org Message-id: 20210121190622.22000-11-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 +- hw/arm/armsse.c | 6 +++--- hw/arm/mps2-tz.c | 2 +- hw/arm/musca.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * QEMU interface: * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK" is the frequency of the main system clock + * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK", ARMSSE, mainclk_frq, 0), + DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) } if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK property was not set"); + error_setg(errp, "MAINCLK_FRQ property was not set"); return; } diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK", SYSCLK_FRQ); + qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Create two input clocks on the ARMSSE devices, one for the normal MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the appropriate devices. The old property-based clock frequency setting will remain in place until conversion is complete. This is a migration compatibility break for machines mps2-an505, mps2-an521, musca-a, musca-b1. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-12-peter.maydell@linaro.org Message-id: 20210121190622.22000-12-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 6 ++++++ hw/arm/armsse.c | 17 +++++++++++++++-- 2 files changed, 21 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * per-CPU identity and control register blocks * * QEMU interface: + * + Clock input "MAINCLK": clock for CPUs and most peripherals + * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock @@ -XXX,XX +XXX,XX @@ #include "hw/misc/armsse-mhu.h" #include "hw/misc/unimp.h" #include "hw/or-irq.h" +#include "hw/clock.h" #include "hw/core/split-irq.h" #include "hw/cpu/cluster.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t nsccfg; + Clock *mainclk; + Clock *s32kclk; + /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/armsse.h" #include "hw/arm/boot.h" #include "hw/irq.h" +#include "hw/qdev-clock.h" /* Format of the System Information block SYS_CONFIG register */ typedef enum SysConfigFormat { @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); + memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); for (i = 0; i < info->num_cpus; i++) { @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * map its upstream ends to the right place in the container. */ qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) &error_abort); qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * 0x4002f000: S32K timer */ qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); + qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); + qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; } @@ -XXX,XX +XXX,XX @@ static void armsse_idau_check(IDAUInterface *ii, uint32_t address, static const VMStateDescription armsse_vmstate = { .name = "iotkit", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_CLOCK(mainclk, ARMSSE), + VMSTATE_CLOCK(s32kclk, ARMSSE), VMSTATE_UINT32(nsccfg, ARMSSE), VMSTATE_END_OF_LIST() } -- 2.20.1 The old-style convenience function cmsdk_apb_timer_create() for creating CMSDK_APB_TIMER objects is used in only two places in mps2.c. Most of the rest of the code in that file uses the new "initialize in place" coding style. We want to connect up a Clock object which should be done between the object creation and realization; rather than adding a Clock* argument to the convenience function, convert the timer creation code in mps2.c to the same style as is used already for the watchdog, dualtimer and other devices, and delete the now-unused convenience function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-13-peter.maydell@linaro.org Message-id: 20210121190622.22000-13-peter.maydell@linaro.org --- include/hw/timer/cmsdk-apb-timer.h | 21 --------------------- hw/arm/mps2.c | 18 ++++++++++++++++-- 2 files changed, 16 insertions(+), 23 deletions(-) diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { uint32_t intstatus; }; -/** - * cmsdk_apb_timer_create - convenience function to create TYPE_CMSDK_APB_TIMER - * @addr: location in system memory to map registers - * @pclk_frq: frequency in Hz of the PCLK clock (used for calculating baud rate) - */ -static inline DeviceState *cmsdk_apb_timer_create(hwaddr addr, - qemu_irq timerint, - uint32_t pclk_frq) -{ - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_CMSDK_APB_TIMER); - s = SYS_BUS_DEVICE(dev); - qdev_prop_set_uint32(dev, "pclk-frq", pclk_frq); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_mmio_map(s, 0, addr); - sysbus_connect_irq(s, 0, timerint); - return dev; -} - #endif diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { /* CMSDK APB subsystem */ CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; + CMSDKAPBTimer timer[2]; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) } /* CMSDK APB subsystem */ - cmsdk_apb_timer_create(0x40000000, qdev_get_gpio_in(armv7m, 8), SYSCLK_FRQ); - cmsdk_apb_timer_create(0x40001000, qdev_get_gpio_in(armv7m, 9), SYSCLK_FRQ); + for (i = 0; i < ARRAY_SIZE(mms->timer); i++) { + g_autofree char *name = g_strdup_printf("timer%d", i); + hwaddr base = 0x40000000 + i * 0x1000; + int irqno = 8 + i; + SysBusDevice *sbd; + + object_initialize_child(OBJECT(mms), name, &mms->timer[i], + TYPE_CMSDK_APB_TIMER); + sbd = SYS_BUS_DEVICE(&mms->timer[i]); + qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); + } + object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); -- 2.20.1 Create a fixed-frequency Clock object to be the SYSCLK, and wire it up to the devices that require it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-14-peter.maydell@linaro.org Message-id: 20210121190622.22000-14-peter.maydell@linaro.org --- hw/arm/mps2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/watchdog/cmsdk-apb-watchdog.h" +#include "hw/qdev-clock.h" #include "qom/object.h" typedef enum MPS2FPGAType { @@ -XXX,XX +XXX,XX @@ struct MPS2MachineState { CMSDKAPBDualTimer dualtimer; CMSDKAPBWatchdog watchdog; CMSDKAPBTimer timer[2]; + Clock *sysclk; }; #define TYPE_MPS2_MACHINE "mps2" @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* This clock doesn't need migration because it is fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + /* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, qdev_get_gpio_in(armv7m, 10)); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); + qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, qdev_get_gpio_in_named(armv7m, "NMI", 0)); -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-15-peter.maydell@linaro.org Message-id: 20210121190622.22000-15-peter.maydell@linaro.org --- hw/arm/mps2-tz.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ #include "hw/net/lan9118.h" #include "net/net.h" #include "hw/core/split-irq.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MPS2TZ_NUMIRQ 92 @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineState { qemu_or_irq uart_irq_orgate; DeviceState *lan9118; SplitIRQ cpu_irq_splitter[MPS2TZ_NUMIRQ]; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MPS2TZ_MACHINE "mps2tz" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) /* Main SYSCLK frequency in Hz */ #define SYSCLK_FRQ 20000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) /* Create an alias of an entire original MemoryRegion @orig * located at @base in the memory map. @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) exit(EXIT_FAILURE); } + /* These clocks don't need migration because they are fixed-frequency */ + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), TYPE_IOTKIT, &mms->iotkit, mmc->armsse_type); iotkitdev = DEVICE(&mms->iotkit); @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); /* -- 2.20.1 Create and connect the two clocks needed by the ARMSSE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-16-peter.maydell@linaro.org Message-id: 20210121190622.22000-16-peter.maydell@linaro.org --- hw/arm/musca.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tz-ppc.h" #include "hw/misc/unimp.h" #include "hw/rtc/pl031.h" +#include "hw/qdev-clock.h" #include "qom/object.h" #define MUSCA_NUMIRQ_MAX 96 @@ -XXX,XX +XXX,XX @@ struct MuscaMachineState { UnimplementedDeviceState sdio; UnimplementedDeviceState gpio; UnimplementedDeviceState cryptoisland; + Clock *sysclk; + Clock *s32kclk; }; #define TYPE_MUSCA_MACHINE "musca" @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MuscaMachineState, MuscaMachineClass, MUSCA_MACHINE) * don't model that in our SSE-200 model yet. */ #define SYSCLK_FRQ 40000000 +/* Slow 32Khz S32KCLK frequency in Hz */ +#define S32KCLK_FRQ (32 * 1000) static qemu_irq get_sse_irq_in(MuscaMachineState *mms, int irqno) { @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) exit(1); } + mms->sysclk = clock_new(OBJECT(machine), "SYSCLK"); + clock_set_hz(mms->sysclk, SYSCLK_FRQ); + mms->s32kclk = clock_new(OBJECT(machine), "S32KCLK"); + clock_set_hz(mms->s32kclk, S32KCLK_FRQ); + object_initialize_child(OBJECT(machine), "sse-200", &mms->sse, TYPE_SSE200); ssedev = DEVICE(&mms->sse); @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); + qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); + qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* * Musca-A takes the default SSE-200 FPU/DSP settings (ie no for * CPU0 and yes for CPU1); Musca-B1 explicitly enables them for CPU0. -- 2.20.1 Convert the SSYS code in the Stellaris boards (which encapsulates the system registers) to a proper QOM device. This will provide us with somewhere to put the output Clock whose frequency depends on the setting of the PLL configuration registers. This is a migration compatibility break for lm3s811evb, lm3s6965evb. We use 3-phase reset here because the Clock will need to propagate its value in the hold phase. For the moment we reset the device during the board creation so that the system_clock_scale global gets set; this will be removed in a subsequent commit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-17-peter.maydell@linaro.org Message-id: 20210121190622.22000-17-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 132 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 107 insertions(+), 25 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_gptm_realize(DeviceState *dev, Error **errp) /* System controller. */ -typedef struct { +#define TYPE_STELLARIS_SYS "stellaris-sys" +OBJECT_DECLARE_SIMPLE_TYPE(ssys_state, STELLARIS_SYS) + +struct ssys_state { + SysBusDevice parent_obj; + MemoryRegion iomem; uint32_t pborctl; uint32_t ldopctl; @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t dcgc[3]; uint32_t clkvclr; uint32_t ldoarst; + qemu_irq irq; + /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; - qemu_irq irq; - stellaris_board_info *board; -} ssys_state; + uint32_t did0; + uint32_t did1; + uint32_t dc0; + uint32_t dc1; + uint32_t dc2; + uint32_t dc3; + uint32_t dc4; +}; static void ssys_update(ssys_state *s) { @@ -XXX,XX +XXX,XX @@ static uint32_t pllcfg_fury[16] = { static int ssys_board_class(const ssys_state *s) { - uint32_t did0 = s->board->did0; + uint32_t did0 = s->did0; switch (did0 & DID0_VER_MASK) { case DID0_VER_0: return DID0_CLASS_SANDSTORM; @@ -XXX,XX +XXX,XX @@ static uint64_t ssys_read(void *opaque, hwaddr offset, switch (offset) { case 0x000: /* DID0 */ - return s->board->did0; + return s->did0; case 0x004: /* DID1 */ - return s->board->did1; + return s->did1; case 0x008: /* DC0 */ - return s->board->dc0; + return s->dc0; case 0x010: /* DC1 */ - return s->board->dc1; + return s->dc1; case 0x014: /* DC2 */ - return s->board->dc2; + return s->dc2; case 0x018: /* DC3 */ - return s->board->dc3; + return s->dc3; case 0x01c: /* DC4 */ - return s->board->dc4; + return s->dc4; case 0x030: /* PBORCTL */ return s->pborctl; case 0x034: /* LDOPCTL */ @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps ssys_ops = { .endianness = DEVICE_NATIVE_ENDIAN, }; -static void ssys_reset(void *opaque) +static void stellaris_sys_reset_enter(Object *obj, ResetType type) { - ssys_state *s = (ssys_state *)opaque; + ssys_state *s = STELLARIS_SYS(obj); s->pborctl = 0x7ffd; s->rcc = 0x078e3ac0; @@ -XXX,XX +XXX,XX @@ static void ssys_reset(void *opaque) s->rcgc[0] = 1; s->scgc[0] = 1; s->dcgc[0] = 1; +} + +static void stellaris_sys_reset_hold(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + ssys_calculate_system_clock(s); } +static void stellaris_sys_reset_exit(Object *obj) +{ +} + static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { } }; +static Property stellaris_sys_properties[] = { + DEFINE_PROP_UINT32("user0", ssys_state, user0, 0), + DEFINE_PROP_UINT32("user1", ssys_state, user1, 0), + DEFINE_PROP_UINT32("did0", ssys_state, did0, 0), + DEFINE_PROP_UINT32("did1", ssys_state, did1, 0), + DEFINE_PROP_UINT32("dc0", ssys_state, dc0, 0), + DEFINE_PROP_UINT32("dc1", ssys_state, dc1, 0), + DEFINE_PROP_UINT32("dc2", ssys_state, dc2, 0), + DEFINE_PROP_UINT32("dc3", ssys_state, dc3, 0), + DEFINE_PROP_UINT32("dc4", ssys_state, dc4, 0), + DEFINE_PROP_END_OF_LIST() +}; + +static void stellaris_sys_instance_init(Object *obj) +{ + ssys_state *s = STELLARIS_SYS(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(s); + + memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); + sysbus_init_mmio(sbd, &s->iomem); + sysbus_init_irq(sbd, &s->irq); +} + static int stellaris_sys_init(uint32_t base, qemu_irq irq, stellaris_board_info * board, uint8_t *macaddr) { - ssys_state *s; + DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); - s = g_new0(ssys_state, 1); - s->irq = irq; - s->board = board; /* Most devices come preprogrammed with a MAC address in the user data. */ - s->user0 = macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16); - s->user1 = macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16); + qdev_prop_set_uint32(dev, "user0", + macaddr[0] | (macaddr[1] << 8) | (macaddr[2] << 16)); + qdev_prop_set_uint32(dev, "user1", + macaddr[3] | (macaddr[4] << 8) | (macaddr[5] << 16)); + qdev_prop_set_uint32(dev, "did0", board->did0); + qdev_prop_set_uint32(dev, "did1", board->did1); + qdev_prop_set_uint32(dev, "dc0", board->dc0); + qdev_prop_set_uint32(dev, "dc1", board->dc1); + qdev_prop_set_uint32(dev, "dc2", board->dc2); + qdev_prop_set_uint32(dev, "dc3", board->dc3); + qdev_prop_set_uint32(dev, "dc4", board->dc4); + + sysbus_realize_and_unref(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, base); + sysbus_connect_irq(sbd, 0, irq); + + /* + * Normally we should not be resetting devices like this during + * board creation. For the moment we need to do so, because + * system_clock_scale will only get set when the STELLARIS_SYS + * device is reset, and we need its initial value to pass to + * the watchdog device. This hack can be removed once the + * watchdog has been converted to use a Clock input instead. + */ + device_cold_reset(dev); - memory_region_init_io(&s->iomem, NULL, &ssys_ops, s, "ssys", 0x00001000); - memory_region_add_subregion(get_system_memory(), base, &s->iomem); - ssys_reset(s); - vmstate_register(NULL, VMSTATE_INSTANCE_ID_ANY, &vmstate_stellaris_sys, s); return 0; } - /* I2C controller. */ #define TYPE_STELLARIS_I2C "stellaris-i2c" @@ -XXX,XX +XXX,XX @@ static const TypeInfo stellaris_adc_info = { .class_init = stellaris_adc_class_init, }; +static void stellaris_sys_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->vmsd = &vmstate_stellaris_sys; + rc->phases.enter = stellaris_sys_reset_enter; + rc->phases.hold = stellaris_sys_reset_hold; + rc->phases.exit = stellaris_sys_reset_exit; + device_class_set_props(dc, stellaris_sys_properties); +} + +static const TypeInfo stellaris_sys_info = { + .name = TYPE_STELLARIS_SYS, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(ssys_state), + .instance_init = stellaris_sys_instance_init, + .class_init = stellaris_sys_class_init, +}; + static void stellaris_register_types(void) { type_register_static(&stellaris_i2c_info); type_register_static(&stellaris_gptm_info); type_register_static(&stellaris_adc_info); + type_register_static(&stellaris_sys_info); } type_init(stellaris_register_types) -- 2.20.1 Create and connect the Clock input for the watchdog device on the Stellaris boards. Because the Stellaris boards model the ability to change the clock rate by programming PLL registers, we have to create an output Clock on the ssys_state device and wire it up to the watchdog. Note that the old comment on ssys_calculate_system_clock() got the units wrong -- system_clock_scale is in nanoseconds, not milliseconds. Improve the commentary to clarify how we are calculating the period. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-18-peter.maydell@linaro.org Message-id: 20210121190622.22000-18-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "hw/watchdog/cmsdk-apb-watchdog.h" #include "migration/vmstate.h" #include "hw/misc/unimp.h" +#include "hw/qdev-clock.h" #include "cpu.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct ssys_state { uint32_t clkvclr; uint32_t ldoarst; qemu_irq irq; + Clock *sysclk; /* Properties (all read-only registers) */ uint32_t user0; uint32_t user1; @@ -XXX,XX +XXX,XX @@ static bool ssys_use_rcc2(ssys_state *s) } /* - * Caculate the sys. clock period in ms. + * Calculate the system clock period. We only want to propagate + * this change to the rest of the system if we're not being called + * from migration post-load. */ -static void ssys_calculate_system_clock(ssys_state *s) +static void ssys_calculate_system_clock(ssys_state *s, bool propagate_clock) { + /* + * SYSDIV field specifies divisor: 0 == /1, 1 == /2, etc. Input + * clock is 200MHz, which is a period of 5 ns. Dividing the clock + * frequency by X is the same as multiplying the period by X. + */ if (ssys_use_rcc2(s)) { system_clock_scale = 5 * (((s->rcc2 >> 23) & 0x3f) + 1); } else { system_clock_scale = 5 * (((s->rcc >> 23) & 0xf) + 1); } + clock_set_ns(s->sysclk, system_clock_scale); + if (propagate_clock) { + clock_propagate(s->sysclk); + } } static void ssys_write(void *opaque, hwaddr offset, @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x070: /* RCC2 */ if (ssys_board_class(s) == DID0_CLASS_SANDSTORM) { @@ -XXX,XX +XXX,XX @@ static void ssys_write(void *opaque, hwaddr offset, s->int_status |= (1 << 6); } s->rcc2 = value; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, true); break; case 0x100: /* RCGC0 */ s->rcgc[0] = value; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_reset_hold(Object *obj) { ssys_state *s = STELLARIS_SYS(obj); - ssys_calculate_system_clock(s); + /* OK to propagate clocks from the hold phase */ + ssys_calculate_system_clock(s, true); } static void stellaris_sys_reset_exit(Object *obj) @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_post_load(void *opaque, int version_id) { ssys_state *s = opaque; - ssys_calculate_system_clock(s); + ssys_calculate_system_clock(s, false); return 0; } @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_stellaris_sys = { VMSTATE_UINT32_ARRAY(dcgc, ssys_state, 3), VMSTATE_UINT32(clkvclr, ssys_state), VMSTATE_UINT32(ldoarst, ssys_state), + /* No field for sysclk -- handled in post-load instead */ VMSTATE_END_OF_LIST() } }; @@ -XXX,XX +XXX,XX @@ static void stellaris_sys_instance_init(Object *obj) memory_region_init_io(&s->iomem, obj, &ssys_ops, s, "ssys", 0x00001000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->irq); + s->sysclk = qdev_init_clock_out(DEVICE(s), "SYSCLK"); } -static int stellaris_sys_init(uint32_t base, qemu_irq irq, - stellaris_board_info * board, - uint8_t *macaddr) +static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, + stellaris_board_info *board, + uint8_t *macaddr) { DeviceState *dev = qdev_new(TYPE_STELLARIS_SYS); SysBusDevice *sbd = SYS_BUS_DEVICE(dev); @@ -XXX,XX +XXX,XX @@ static int stellaris_sys_init(uint32_t base, qemu_irq irq, */ device_cold_reset(dev); - return 0; + return dev; } /* I2C controller. */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) int flash_size; I2CBus *i2c; DeviceState *dev; + DeviceState *ssys_dev; int i; int j; @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) } } - stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), - board, nd_table[0].macaddr.a); + ssys_dev = stellaris_sys_init(0x400fe000, qdev_get_gpio_in(nvic, 28), + board, nd_table[0].macaddr.a); if (board->dc1 & (1 << 3)) { /* watchdog present */ @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) /* system_clock_scale is valid now */ uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); + qdev_connect_clock_in(dev, "WDOGCLK", + qdev_get_clock_out(ssys_dev, "SYSCLK")); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), -- 2.20.1 Switch the CMSDK APB timer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-19-peter.maydell@linaro.org Message-id: 20210121190622.22000-19-peter.maydell@linaro.org --- hw/timer/cmsdk-apb-timer.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_timer_clk_update(void *opaque) +{ + CMSDKAPBTimer *s = CMSDK_APB_TIMER(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_timer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_init(Object *obj) s, "cmsdk-apb-timer", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->timerint); - s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", NULL, NULL); + s->pclk = qdev_init_clock_in(DEVICE(s), "pclk", + cmsdk_apb_timer_clk_update, s); } static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) { CMSDKAPBTimer *s = CMSDK_APB_TIMER(dev); - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->pclk)) { + error_setg(errp, "CMSDK APB timer: pclk clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->pclk_frq); + ptimer_set_period_from_clock(s->timer, s->pclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Switch the CMSDK APB dualtimer device over to using its Clock input; the pclk-frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-20-peter.maydell@linaro.org Message-id: 20210121190622.22000-20-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/timer/cmsdk-apb-dualtimer.c | 42 ++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 5 deletions(-) diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) qemu_set_irq(s->timerintc, timintc); } +static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) +{ + /* Return the divisor set by the current CONTROL.PRESCALE value */ + switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { + case 0: + return 1; + case 1: + return 16; + case 2: + case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ + return 256; + default: + g_assert_not_reached(); + } +} + static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, uint32_t newctrl) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, default: g_assert_not_reached(); } - ptimer_set_freq(m->timer, m->parent->pclk_frq / divisor); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); } if (changed & R_CONTROL_MODE_MASK) { @@ -XXX,XX +XXX,XX @@ static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) * limit must both be set to 0xffff, so we wrap at 16 bits. */ ptimer_set_limit(m->timer, 0xffff, 1); - ptimer_set_freq(m->timer, m->parent->pclk_frq); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); ptimer_transaction_commit(m->timer); } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_reset(DeviceState *dev) s->timeritop = 0; } +static void cmsdk_apb_dualtimer_clk_update(void *opaque) +{ + CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); + int i; + + for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { + CMSDKAPBDualTimerModule *m = &s->timermod[i]; + ptimer_transaction_begin(m->timer); + ptimer_set_period_from_clock(m->timer, m->parent->timclk, + cmsdk_dualtimermod_divisor(m)); + ptimer_transaction_commit(m->timer); + } +} + static void cmsdk_apb_dualtimer_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_init(Object *obj) for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { sysbus_init_irq(sbd, &s->timermod[i].timerint); } - s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", NULL, NULL); + s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", + cmsdk_apb_dualtimer_clk_update, s); } static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); int i; - if (s->pclk_frq == 0) { - error_setg(errp, "CMSDK APB timer: pclk-frq property must be set"); + if (!clock_has_source(s->timclk)) { + error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); return; } -- 2.20.1 Switch the CMSDK APB watchdog device over to using its Clock input; the wdogclk_frq property is now ignored. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-21-peter.maydell@linaro.org Message-id: 20210121190622.22000-21-peter.maydell@linaro.org --- hw/watchdog/cmsdk-apb-watchdog.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_reset(DeviceState *dev) ptimer_transaction_commit(s->timer); } +static void cmsdk_apb_watchdog_clk_update(void *opaque) +{ + CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(opaque); + + ptimer_transaction_begin(s->timer); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); + ptimer_transaction_commit(s->timer); +} + static void cmsdk_apb_watchdog_init(Object *obj) { SysBusDevice *sbd = SYS_BUS_DEVICE(obj); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_init(Object *obj) s, "cmsdk-apb-watchdog", 0x1000); sysbus_init_mmio(sbd, &s->iomem); sysbus_init_irq(sbd, &s->wdogint); - s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", NULL, NULL); + s->wdogclk = qdev_init_clock_in(DEVICE(s), "WDOGCLK", + cmsdk_apb_watchdog_clk_update, s); s->is_luminary = false; s->id = cmsdk_apb_watchdog_id; @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) { CMSDKAPBWatchdog *s = CMSDK_APB_WATCHDOG(dev); - if (s->wdogclk_frq == 0) { + if (!clock_has_source(s->wdogclk)) { error_setg(errp, - "CMSDK APB watchdog: wdogclk-frq property must be set"); + "CMSDK APB watchdog: WDOGCLK clock must be connected"); return; } @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_realize(DeviceState *dev, Error **errp) PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); ptimer_transaction_begin(s->timer); - ptimer_set_freq(s->timer, s->wdogclk_frq); + ptimer_set_period_from_clock(s->timer, s->wdogclk, 1); ptimer_transaction_commit(s->timer); } -- 2.20.1 Now that the CMSDK APB watchdog uses its Clock input, it will correctly respond when the system clock frequency is changed using the RCC register on in the Stellaris board system registers. Test that when the RCC register is written it causes the watchdog timer to change speed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-22-peter.maydell@linaro.org Message-id: 20210121190622.22000-22-peter.maydell@linaro.org --- tests/qtest/cmsdk-apb-watchdog-test.c | 52 +++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/bitops.h" #include "libqtest-single.h" /* @@ -XXX,XX +XXX,XX @@ #define WDOGMIS 0x14 #define WDOGLOCK 0xc00 +#define SSYS_BASE 0x400fe000 +#define RCC 0x60 +#define SYSDIV_SHIFT 23 +#define SYSDIV_LENGTH 4 + static void test_watchdog(void) { g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); @@ -XXX,XX +XXX,XX @@ static void test_watchdog(void) g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); } +static void test_clock_change(void) +{ + uint32_t rcc; + + /* + * Test that writing to the stellaris board's RCC register to + * change the system clock frequency causes the watchdog + * to change the speed it counts at. + */ + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + writel(WDOG_BASE + WDOGCONTROL, 1); + writel(WDOG_BASE + WDOGLOAD, 1000); + + /* Step to just past the 500th tick */ + clock_step(80 * 500 + 1); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + + /* Rewrite RCC.SYSDIV from 16 to 8, so the clock is now 40ns per tick */ + rcc = readl(SSYS_BASE + RCC); + g_assert_cmpuint(extract32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH), ==, 0xf); + rcc = deposit32(rcc, SYSDIV_SHIFT, SYSDIV_LENGTH, 7); + writel(SSYS_BASE + RCC, rcc); + + /* Just past the 1000th tick: timer should have fired */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + + /* VALUE reloads at following tick */ + clock_step(41); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + + /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ + clock_step(40 * 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); + writel(WDOG_BASE + WDOGINTCLR, 0); + g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); +} + int main(int argc, char **argv) { int r; @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv) qtest_start("-machine lm3s811evb"); qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); + qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", + test_clock_change); r = g_test_run(); -- 2.20.1 Use the MAINCLK Clock input to set the system_clock_scale variable rather than using the mainclk_frq property. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Message-id: 20210128114145.20536-23-peter.maydell@linaro.org Message-id: 20210121190622.22000-23-peter.maydell@linaro.org --- hw/arm/armsse.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_forward_sec_resp_cfg(ARMSSE *s) qdev_connect_gpio_out(dev_splitter, 2, s->sec_resp_cfg_in); } +static void armsse_mainclk_update(void *opaque) +{ + ARMSSE *s = ARM_SSE(opaque); + /* + * Set system_clock_scale from our Clock input; this is what + * controls the tick rate of the CPU SysTick timer. + */ + system_clock_scale = clock_ticks_to_ns(s->mainclk, 1); +} + static void armsse_init(Object *obj) { ARMSSE *s = ARM_SSE(obj); @@ -XXX,XX +XXX,XX @@ static void armsse_init(Object *obj) assert(info->sram_banks <= MAX_SRAM_BANKS); assert(info->num_cpus <= SSE_MAX_CPUS); - s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL); + s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", + armsse_mainclk_update, s); s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL); memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } - if (!s->mainclk_frq) { - error_setg(errp, "MAINCLK_FRQ property was not set"); - return; + if (!clock_has_source(s->mainclk)) { + error_setg(errp, "MAINCLK clock was not connected"); + } + if (!clock_has_source(s->s32kclk)) { + error_setg(errp, "S32KCLK clock was not connected"); } assert(info->num_cpus <= SSE_MAX_CPUS); @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) */ sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->container); - system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq; + /* Set initial system_clock_scale from MAINCLK */ + armsse_mainclk_update(s); } static void armsse_idau_check(IDAUInterface *ii, uint32_t address, -- 2.20.1 Remove all the code that sets frequency properties on the CMSDK timer, dualtimer and watchdog devices and on the ARMSSE SoC device: these properties are unused now that the devices rely on their Clock inputs instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-24-peter.maydell@linaro.org Message-id: 20210121190622.22000-24-peter.maydell@linaro.org --- hw/arm/armsse.c | 7 ------- hw/arm/mps2-tz.c | 1 - hw/arm/mps2.c | 3 --- hw/arm/musca.c | 1 - hw/arm/stellaris.c | 3 --- 5 files changed, 15 deletions(-) diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) * it to the appropriate PPC port; then we can realize the PPC and * map its upstream ends to the right place in the container. */ - qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[0]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) object_property_set_link(OBJECT(&s->apb_ppc0), "port[1]", OBJECT(mr), &error_abort); - qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* Devices behind APB PPC1: * 0x4002f000: S32K timer */ - qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) qdev_connect_gpio_out(DEVICE(&s->nmi_orgate), 0, qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 0)); - qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK); qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */ - qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) { return; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) armsse_get_common_irq_in(s, 1)); sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000); - qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq); qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk); if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) { return; diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) object_property_set_link(OBJECT(&mms->iotkit), "memory", OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", MPS2TZ_NUMIRQ); - qdev_prop_set_uint32(iotkitdev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); sysbus_realize(SYS_BUS_DEVICE(&mms->iotkit), &error_fatal); diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), name, &mms->timer[i], TYPE_CMSDK_APB_TIMER); sbd = SYS_BUS_DEVICE(&mms->timer[i]); - qdev_prop_set_uint32(DEVICE(&mms->timer[i]), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk); sysbus_realize_and_unref(sbd, &error_fatal); sysbus_mmio_map(sbd, 0, base); @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer, TYPE_CMSDK_APB_DUALTIMER); - qdev_prop_set_uint32(DEVICE(&mms->dualtimer), "pclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0, @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000); object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog, TYPE_CMSDK_APB_WATCHDOG); - qdev_prop_set_uint32(DEVICE(&mms->watchdog), "wdogclk-frq", SYSCLK_FRQ); qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk); sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal); sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0, diff --git a/hw/arm/musca.c b/hw/arm/musca.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/musca.c +++ b/hw/arm/musca.c @@ -XXX,XX +XXX,XX @@ static void musca_init(MachineState *machine) qdev_prop_set_uint32(ssedev, "EXP_NUMIRQ", mmc->num_irqs); qdev_prop_set_uint32(ssedev, "init-svtor", mmc->init_svtor); qdev_prop_set_uint32(ssedev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); - qdev_prop_set_uint32(ssedev, "MAINCLK_FRQ", SYSCLK_FRQ); qdev_connect_clock_in(ssedev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(ssedev, "S32KCLK", mms->s32kclk); /* diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) if (board->dc1 & (1 << 3)) { /* watchdog present */ dev = qdev_new(TYPE_LUMINARY_WATCHDOG); - /* system_clock_scale is valid now */ - uint32_t mainclk = NANOSECONDS_PER_SECOND / system_clock_scale; - qdev_prop_set_uint32(dev, "wdogclk-frq", mainclk); qdev_connect_clock_in(dev, "WDOGCLK", qdev_get_clock_out(ssys_dev, "SYSCLK")); -- 2.20.1 Now no users are setting the frq properties on the CMSDK timer, dualtimer, watchdog or ARMSSE SoC devices, we can remove the properties and the struct fields that back them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-25-peter.maydell@linaro.org Message-id: 20210121190622.22000-25-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 2 -- include/hw/timer/cmsdk-apb-dualtimer.h | 2 -- include/hw/timer/cmsdk-apb-timer.h | 2 -- include/hw/watchdog/cmsdk-apb-watchdog.h | 2 -- hw/arm/armsse.c | 2 -- hw/timer/cmsdk-apb-dualtimer.c | 6 ------ hw/timer/cmsdk-apb-timer.c | 6 ------ hw/watchdog/cmsdk-apb-watchdog.c | 6 ------ 8 files changed, 28 deletions(-) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals * + QOM property "memory" is a MemoryRegion containing the devices provided * by the board model. - * + QOM property "MAINCLK_FRQ" is the frequency of the main system clock * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts. * (In hardware, the SSE-200 permits the number of expansion interrupts * for the two CPUs to be configured separately, but we restrict it to @@ -XXX,XX +XXX,XX @@ struct ARMSSE { /* Properties */ MemoryRegion *board_memory; uint32_t exp_numirq; - uint32_t mainclk_frq; uint32_t sram_addr_width; uint32_t init_svtor; bool cpu_fpu[SSE_MAX_CPUS]; diff --git a/include/hw/timer/cmsdk-apb-dualtimer.h b/include/hw/timer/cmsdk-apb-dualtimer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-dualtimer.h +++ b/include/hw/timer/cmsdk-apb-dualtimer.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "TIMCLK": clock (for both timers) * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: combined timer interrupt TIMINTC @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBDualTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerintc; - uint32_t pclk_frq; Clock *timclk; CMSDKAPBDualTimerModule timermod[CMSDK_APB_DUALTIMER_NUM_MODULES]; diff --git a/include/hw/timer/cmsdk-apb-timer.h b/include/hw/timer/cmsdk-apb-timer.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/timer/cmsdk-apb-timer.h +++ b/include/hw/timer/cmsdk-apb-timer.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(CMSDKAPBTimer, CMSDK_APB_TIMER) /* * QEMU interface: - * + QOM property "pclk-frq": frequency at which the timer is clocked * + Clock input "pclk": clock for the timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: timer interrupt TIMERINT @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBTimer { /*< public >*/ MemoryRegion iomem; qemu_irq timerint; - uint32_t pclk_frq; struct ptimer_state *timer; Clock *pclk; diff --git a/include/hw/watchdog/cmsdk-apb-watchdog.h b/include/hw/watchdog/cmsdk-apb-watchdog.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/cmsdk-apb-watchdog.h +++ b/include/hw/watchdog/cmsdk-apb-watchdog.h @@ -XXX,XX +XXX,XX @@ * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit * * QEMU interface: - * + QOM property "wdogclk-frq": frequency at which the watchdog is clocked * + Clock input "WDOGCLK": clock for the watchdog's timer * + sysbus MMIO region 0: the register bank * + sysbus IRQ 0: watchdog interrupt @@ -XXX,XX +XXX,XX @@ struct CMSDKAPBWatchdog { /*< public >*/ MemoryRegion iomem; qemu_irq wdogint; - uint32_t wdogclk_frq; bool is_luminary; struct ptimer_state *timer; Clock *wdogclk; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), @@ -XXX,XX +XXX,XX @@ static Property armsse_properties[] = { DEFINE_PROP_LINK("memory", ARMSSE, board_memory, TYPE_MEMORY_REGION, MemoryRegion *), DEFINE_PROP_UINT32("EXP_NUMIRQ", ARMSSE, exp_numirq, 64), - DEFINE_PROP_UINT32("MAINCLK_FRQ", ARMSSE, mainclk_frq, 0), DEFINE_PROP_UINT32("SRAM_ADDR_WIDTH", ARMSSE, sram_addr_width, 15), DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], false), diff --git a/hw/timer/cmsdk-apb-dualtimer.c b/hw/timer/cmsdk-apb-dualtimer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-dualtimer.c +++ b/hw/timer/cmsdk-apb-dualtimer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { } }; -static Property cmsdk_apb_dualtimer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBDualTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_dualtimer_realize; dc->vmsd = &cmsdk_apb_dualtimer_vmstate; dc->reset = cmsdk_apb_dualtimer_reset; - device_class_set_props(dc, cmsdk_apb_dualtimer_properties); } static const TypeInfo cmsdk_apb_dualtimer_info = { diff --git a/hw/timer/cmsdk-apb-timer.c b/hw/timer/cmsdk-apb-timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cmsdk-apb-timer.c +++ b/hw/timer/cmsdk-apb-timer.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_timer_vmstate = { } }; -static Property cmsdk_apb_timer_properties[] = { - DEFINE_PROP_UINT32("pclk-frq", CMSDKAPBTimer, pclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_timer_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_timer_realize; dc->vmsd = &cmsdk_apb_timer_vmstate; dc->reset = cmsdk_apb_timer_reset; - device_class_set_props(dc, cmsdk_apb_timer_properties); } static const TypeInfo cmsdk_apb_timer_info = { diff --git a/hw/watchdog/cmsdk-apb-watchdog.c b/hw/watchdog/cmsdk-apb-watchdog.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/cmsdk-apb-watchdog.c +++ b/hw/watchdog/cmsdk-apb-watchdog.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription cmsdk_apb_watchdog_vmstate = { } }; -static Property cmsdk_apb_watchdog_properties[] = { - DEFINE_PROP_UINT32("wdogclk-frq", CMSDKAPBWatchdog, wdogclk_frq, 0), - DEFINE_PROP_END_OF_LIST(), -}; - static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); @@ -XXX,XX +XXX,XX @@ static void cmsdk_apb_watchdog_class_init(ObjectClass *klass, void *data) dc->realize = cmsdk_apb_watchdog_realize; dc->vmsd = &cmsdk_apb_watchdog_vmstate; dc->reset = cmsdk_apb_watchdog_reset; - device_class_set_props(dc, cmsdk_apb_watchdog_properties); } static const TypeInfo cmsdk_apb_watchdog_info = { -- 2.20.1 Now that the watchdog device uses its Clock input rather than being passed the value of system_clock_scale at creation time, we can remove the hack where we reset the STELLARIS_SYS at board creation time to force it to set system_clock_scale. Instead it will be reset at the usual point in startup and will inform the watchdog of the clock frequency at that point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Luc Michel <luc@lmichel.fr> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210128114145.20536-26-peter.maydell@linaro.org Message-id: 20210121190622.22000-26-peter.maydell@linaro.org Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- hw/arm/stellaris.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ static DeviceState *stellaris_sys_init(uint32_t base, qemu_irq irq, sysbus_mmio_map(sbd, 0, base); sysbus_connect_irq(sbd, 0, irq); - /* - * Normally we should not be resetting devices like this during - * board creation. For the moment we need to do so, because - * system_clock_scale will only get set when the STELLARIS_SYS - * device is reset, and we need its initial value to pass to - * the watchdog device. This hack can be removed once the - * watchdog has been converted to use a Clock input instead. - */ - device_cold_reset(dev); - return dev; } -- 2.20.1 First arm pullreq for 7.1. The bulk of this is the qemu_split_irq removal. I have enough stuff in my to-review queue that I expect to do another pullreq early next week, but 31 patches is enough to not hang on to. thanks -- PMM The following changes since commit 9c125d17e9402c232c46610802e5931b3639d77b: Merge tag 'pull-tcg-20220420' of https://gitlab.com/rth7680/qemu into staging (2022-04-20 16:43:11 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220421 for you to fetch changes up to 5b415dd61bdbf61fb4be0e9f1a7172b8bce682c6: hw/arm: Use bit fields for NPCM7XX PWRON STRAPs (2022-04-21 11:37:05 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF * versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem * versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s * xlnx-zynqmp: Connect 4 TTC timers * exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq * realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' * stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' * hw/core/irq: remove unused 'qemu_irq_split' function * npcm7xx: use symbolic constants for PWRON STRAP bit fields * virt: document impact of gic-version on max CPUs ---------------------------------------------------------------- Edgar E. Iglesias (6): timer: cadence_ttc: Break out header file to allow embedding hw/arm/xlnx-zynqmp: Connect 4 TTC timers hw/arm: versal: Create an APU CPU Cluster hw/arm: versal: Add the Cortex-R5Fs hw/misc: Add a model of the Xilinx Versal CRL hw/arm: versal: Connect the CRL Hao Wu (2): hw/misc: Add PWRON STRAP bit fields in GCR module hw/arm: Use bit fields for NPCM7XX PWRON STRAPs Heinrich Schuchardt (1): hw/arm/virt: impact of gic-version on max CPUs Peter Maydell (19): hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF hw/arm/exynos4210: Use TYPE_OR_IRQ instead of custom OR-gate device hw/intc/exynos4210_gic: Remove unused TYPE_EXYNOS4210_IRQ_GATE hw/arm/exynos4210: Put a9mpcore device into state struct hw/arm/exynos4210: Drop int_gic_irq[] from Exynos4210Irq struct hw/arm/exynos4210: Coalesce board_irqs and irq_table hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[] hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c hw/arm/exynos4210: Put external GIC into state struct hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c hw/arm/exynos4210: Delete unused macro definitions hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs() hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs() hw/arm/exynos4210: Put combiners into state struct hw/arm/exynos4210: Drop Exynos4210Irq struct Zongyuan Li (3): hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' hw/core/irq: remove unused 'qemu_irq_split' function docs/system/arm/virt.rst | 4 +- include/hw/arm/exynos4210.h | 50 ++-- include/hw/arm/xlnx-versal.h | 16 ++ include/hw/arm/xlnx-zynqmp.h | 4 + include/hw/intc/exynos4210_combiner.h | 57 +++++ include/hw/intc/exynos4210_gic.h | 43 ++++ include/hw/irq.h | 5 - include/hw/misc/npcm7xx_gcr.h | 30 +++ include/hw/misc/xlnx-versal-crl.h | 235 +++++++++++++++++++ include/hw/timer/cadence_ttc.h | 54 +++++ hw/arm/exynos4210.c | 430 ++++++++++++++++++++++++++++++---- hw/arm/npcm7xx_boards.c | 24 +- hw/arm/realview.c | 33 ++- hw/arm/stellaris.c | 15 +- hw/arm/virt.c | 7 + hw/arm/xlnx-versal-virt.c | 6 +- hw/arm/xlnx-versal.c | 99 +++++++- hw/arm/xlnx-zynqmp.c | 22 ++ hw/core/irq.c | 15 -- hw/intc/exynos4210_combiner.c | 108 +-------- hw/intc/exynos4210_gic.c | 344 +-------------------------- hw/misc/xlnx-versal-crl.c | 421 +++++++++++++++++++++++++++++++++ hw/timer/cadence_ttc.c | 32 +-- MAINTAINERS | 2 +- hw/misc/meson.build | 1 + 25 files changed, 1457 insertions(+), 600 deletions(-) create mode 100644 include/hw/intc/exynos4210_combiner.h create mode 100644 include/hw/intc/exynos4210_gic.h create mode 100644 include/hw/misc/xlnx-versal-crl.h create mode 100644 include/hw/timer/cadence_ttc.h create mode 100644 hw/misc/xlnx-versal-crl.c It's not possible to provide the guest with the Security extensions (TrustZone) when using KVM or HVF, because the hardware virtualization extensions don't permit running EL3 guest code. However, we weren't checking for this combination, with the result that QEMU would assert if you tried it: $ qemu-system-aarch64 -enable-kvm -machine virt,secure=on -cpu host -display none Unexpected error in object_property_find_err() at ../../qom/object.c:1304: qemu-system-aarch64: Property 'host-arm-cpu.secure-memory' not found Aborted Check for this combination of options and report an error, in the same way we already do for attempts to give a KVM or HVF guest the Virtualization or MTE extensions. Now we will report: qemu-system-aarch64: mach-virt: KVM does not support providing Security extensions (TrustZone) to the guest CPU Resolves: https://gitlab.com/qemu-project/qemu/-/issues/961 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404155301.566542-1-peter.maydell@linaro.org --- hw/arm/virt.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } + if (vms->secure && (kvm_enabled() || hvf_enabled())) { + error_report("mach-virt: %s does not support providing " + "Security extensions (TrustZone) to the guest CPU", + kvm_enabled() ? "KVM" : "HVF"); + exit(1); + } + if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Break out header file to allow embedding of the the TTC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220331222017.2914409-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/cadence_ttc.h | 54 ++++++++++++++++++++++++++++++++++ hw/timer/cadence_ttc.c | 32 ++------------------ 2 files changed, 56 insertions(+), 30 deletions(-) create mode 100644 include/hw/timer/cadence_ttc.h diff --git a/include/hw/timer/cadence_ttc.h b/include/hw/timer/cadence_ttc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/cadence_ttc.h @@ -XXX,XX +XXX,XX @@ +/* + * Xilinx Zynq cadence TTC model + * + * Copyright (c) 2011 Xilinx Inc. + * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) + * Copyright (c) 2012 PetaLogix Pty Ltd. + * Written By Haibing Ma + * M. Habib + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HW_TIMER_CADENCE_TTC_H +#define HW_TIMER_CADENCE_TTC_H + +#include "hw/sysbus.h" +#include "qemu/timer.h" + +typedef struct { + QEMUTimer *timer; + int freq; + + uint32_t reg_clock; + uint32_t reg_count; + uint32_t reg_value; + uint16_t reg_interval; + uint16_t reg_match[3]; + uint32_t reg_intr; + uint32_t reg_intr_en; + uint32_t reg_event_ctrl; + uint32_t reg_event; + + uint64_t cpu_time; + unsigned int cpu_time_valid; + + qemu_irq irq; +} CadenceTimerState; + +#define TYPE_CADENCE_TTC "cadence_ttc" +OBJECT_DECLARE_SIMPLE_TYPE(CadenceTTCState, CADENCE_TTC) + +struct CadenceTTCState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + CadenceTimerState timer[3]; +}; + +#endif diff --git a/hw/timer/cadence_ttc.c b/hw/timer/cadence_ttc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cadence_ttc.c +++ b/hw/timer/cadence_ttc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qom/object.h" +#include "hw/timer/cadence_ttc.h" + #ifdef CADENCE_TTC_ERR_DEBUG #define DB_PRINT(...) do { \ fprintf(stderr, ": %s: ", __func__); \ @@ -XXX,XX +XXX,XX @@ #define CLOCK_CTRL_PS_EN 0x00000001 #define CLOCK_CTRL_PS_V 0x0000001e -typedef struct { - QEMUTimer *timer; - int freq; - - uint32_t reg_clock; - uint32_t reg_count; - uint32_t reg_value; - uint16_t reg_interval; - uint16_t reg_match[3]; - uint32_t reg_intr; - uint32_t reg_intr_en; - uint32_t reg_event_ctrl; - uint32_t reg_event; - - uint64_t cpu_time; - unsigned int cpu_time_valid; - - qemu_irq irq; -} CadenceTimerState; - -#define TYPE_CADENCE_TTC "cadence_ttc" -OBJECT_DECLARE_SIMPLE_TYPE(CadenceTTCState, CADENCE_TTC) - -struct CadenceTTCState { - SysBusDevice parent_obj; - - MemoryRegion iomem; - CadenceTimerState timer[3]; -}; - static void cadence_timer_update(CadenceTimerState *s) { qemu_set_irq(s->irq, !!(s->reg_intr & s->reg_intr_en)); -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Connect the 4 TTC timers on the ZynqMP. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220331222017.2914409-3-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 4 ++++ hw/arm/xlnx-zynqmp.c | 22 ++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/misc/xlnx-zynqmp-apu-ctrl.h" #include "hw/misc/xlnx-zynqmp-crf.h" +#include "hw/timer/cadence_ttc.h" #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp" OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) #define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \ XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE) +#define XLNX_ZYNQMP_NUM_TTC 4 + /* * Unimplemented mmio regions needed to boot some images. */ @@ -XXX,XX +XXX,XX @@ struct XlnxZynqMPState { qemu_or_irq qspi_irq_orgate; XlnxZynqMPAPUCtrl apu_ctrl; XlnxZynqMPCRF crf; + CadenceTTCState ttc[XLNX_ZYNQMP_NUM_TTC]; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define APU_ADDR 0xfd5c0000 #define APU_IRQ 153 +#define TTC0_ADDR 0xFF110000 +#define TTC0_IRQ 36 + #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_create_crf(XlnxZynqMPState *s, qemu_irq *gic) sysbus_connect_irq(sbd, 0, gic[CRF_IRQ]); } +static void xlnx_zynqmp_create_ttc(XlnxZynqMPState *s, qemu_irq *gic) +{ + SysBusDevice *sbd; + int i, irq; + + for (i = 0; i < XLNX_ZYNQMP_NUM_TTC; i++) { + object_initialize_child(OBJECT(s), "ttc[*]", &s->ttc[i], + TYPE_CADENCE_TTC); + sbd = SYS_BUS_DEVICE(&s->ttc[i]); + + sysbus_realize(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, TTC0_ADDR + i * 0x10000); + for (irq = 0; irq < 3; irq++) { + sysbus_connect_irq(sbd, irq, gic[TTC0_IRQ + i * 3 + irq]); + } + } +} + static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s) { static const struct UnimpInfo { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) xlnx_zynqmp_create_efuse(s, gic_spi); xlnx_zynqmp_create_apu_ctrl(s, gic_spi); xlnx_zynqmp_create_crf(s, gic_spi); + xlnx_zynqmp_create_ttc(s, gic_spi); xlnx_zynqmp_create_unimp_mmio(s); for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) { -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Create an APU CPU Cluster. This is in preparation to add the RPU. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-2-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 2 ++ hw/arm/xlnx-versal.c | 9 ++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/boot.h" +#include "hw/cpu/cluster.h" #include "hw/or-irq.h" #include "hw/sd/sdhci.h" #include "hw/intc/arm_gicv3.h" @@ -XXX,XX +XXX,XX @@ struct Versal { struct { struct { MemoryRegion mr; + CPUClusterState cluster; ARMCPU cpu[XLNX_VERSAL_NR_ACPUS]; GICv3State gic; } apu; diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_cpus(Versal *s) { int i; + object_initialize_child(OBJECT(s), "apu-cluster", &s->fpd.apu.cluster, + TYPE_CPU_CLUSTER); + qdev_prop_set_uint32(DEVICE(&s->fpd.apu.cluster), "cluster-id", 0); + for (i = 0; i < ARRAY_SIZE(s->fpd.apu.cpu); i++) { Object *obj; - object_initialize_child(OBJECT(s), "apu-cpu[*]", &s->fpd.apu.cpu[i], + object_initialize_child(OBJECT(&s->fpd.apu.cluster), + "apu-cpu[*]", &s->fpd.apu.cpu[i], XLNX_VERSAL_ACPU_TYPE); obj = OBJECT(&s->fpd.apu.cpu[i]); if (i) { @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_cpus(Versal *s) &error_abort); qdev_realize(DEVICE(obj), NULL, &error_fatal); } + + qdev_realize(DEVICE(&s->fpd.apu.cluster), NULL, &error_fatal); } static void versal_create_apu_gic(Versal *s, qemu_irq *pic) -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Add the Cortex-R5Fs of the Versal RPU (Real-time Processing Unit) subsystem. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-3-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 10 ++++++++++ hw/arm/xlnx-versal-virt.c | 6 +++--- hw/arm/xlnx-versal.c | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 49 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL) #define XLNX_VERSAL_NR_ACPUS 2 +#define XLNX_VERSAL_NR_RCPUS 2 #define XLNX_VERSAL_NR_UARTS 2 #define XLNX_VERSAL_NR_GEMS 2 #define XLNX_VERSAL_NR_ADMAS 8 @@ -XXX,XX +XXX,XX @@ struct Versal { VersalUsb2 usb; } iou; + /* Real-time Processing Unit. */ + struct { + MemoryRegion mr; + MemoryRegion mr_ps_alias; + + CPUClusterState cluster; + ARMCPU cpu[XLNX_VERSAL_NR_RCPUS]; + } rpu; + struct { qemu_or_irq irq_orgate; XlnxXramCtrl ctrl[XLNX_VERSAL_NR_XRAM]; diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void versal_virt_machine_class_init(ObjectClass *oc, void *data) mc->desc = "Xilinx Versal Virtual development board"; mc->init = versal_virt_init; - mc->min_cpus = XLNX_VERSAL_NR_ACPUS; - mc->max_cpus = XLNX_VERSAL_NR_ACPUS; - mc->default_cpus = XLNX_VERSAL_NR_ACPUS; + mc->min_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; + mc->max_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; + mc->default_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; mc->no_cdrom = true; mc->default_ram_id = "ddr"; } diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #define XLNX_VERSAL_ACPU_TYPE ARM_CPU_TYPE_NAME("cortex-a72") +#define XLNX_VERSAL_RCPU_TYPE ARM_CPU_TYPE_NAME("cortex-r5f") #define GEM_REVISION 0x40070106 #define VERSAL_NUM_PMC_APB_IRQS 3 @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_gic(Versal *s, qemu_irq *pic) } } +static void versal_create_rpu_cpus(Versal *s) +{ + int i; + + object_initialize_child(OBJECT(s), "rpu-cluster", &s->lpd.rpu.cluster, + TYPE_CPU_CLUSTER); + qdev_prop_set_uint32(DEVICE(&s->lpd.rpu.cluster), "cluster-id", 1); + + for (i = 0; i < ARRAY_SIZE(s->lpd.rpu.cpu); i++) { + Object *obj; + + object_initialize_child(OBJECT(&s->lpd.rpu.cluster), + "rpu-cpu[*]", &s->lpd.rpu.cpu[i], + XLNX_VERSAL_RCPU_TYPE); + obj = OBJECT(&s->lpd.rpu.cpu[i]); + object_property_set_bool(obj, "start-powered-off", true, + &error_abort); + + object_property_set_int(obj, "mp-affinity", 0x100 | i, &error_abort); + object_property_set_int(obj, "core-count", ARRAY_SIZE(s->lpd.rpu.cpu), + &error_abort); + object_property_set_link(obj, "memory", OBJECT(&s->lpd.rpu.mr), + &error_abort); + qdev_realize(DEVICE(obj), NULL, &error_fatal); + } + + qdev_realize(DEVICE(&s->lpd.rpu.cluster), NULL, &error_fatal); +} + static void versal_create_uarts(Versal *s, qemu_irq *pic) { int i; @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_apu_cpus(s); versal_create_apu_gic(s, pic); + versal_create_rpu_cpus(s); versal_create_uarts(s, pic); versal_create_usbs(s, pic); versal_create_gems(s, pic); @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) memory_region_add_subregion_overlap(&s->mr_ps, MM_OCM, &s->lpd.mr_ocm, 0); memory_region_add_subregion_overlap(&s->fpd.apu.mr, 0, &s->mr_ps, 0); + memory_region_add_subregion_overlap(&s->lpd.rpu.mr, 0, + &s->lpd.rpu.mr_ps_alias, 0); } static void versal_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void versal_init(Object *obj) Versal *s = XLNX_VERSAL(obj); memory_region_init(&s->fpd.apu.mr, obj, "mr-apu", UINT64_MAX); + memory_region_init(&s->lpd.rpu.mr, obj, "mr-rpu", UINT64_MAX); memory_region_init(&s->mr_ps, obj, "mr-ps-switch", UINT64_MAX); + memory_region_init_alias(&s->lpd.rpu.mr_ps_alias, OBJECT(s), + "mr-rpu-ps-alias", &s->mr_ps, 0, UINT64_MAX); } static Property versal_properties[] = { -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Add a model of the Xilinx Versal CRL. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/xlnx-versal-crl.h | 235 +++++++++++++++++ hw/misc/xlnx-versal-crl.c | 421 ++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + 3 files changed, 657 insertions(+) create mode 100644 include/hw/misc/xlnx-versal-crl.h create mode 100644 hw/misc/xlnx-versal-crl.c diff --git a/include/hw/misc/xlnx-versal-crl.h b/include/hw/misc/xlnx-versal-crl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/xlnx-versal-crl.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Clock-Reset-LPD (CRL). + * + * Copyright (c) 2022 Xilinx Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Edgar E. Iglesias <edgar.iglesias@xilinx.com> + */ +#ifndef HW_MISC_XLNX_VERSAL_CRL_H +#define HW_MISC_XLNX_VERSAL_CRL_H + +#include "hw/sysbus.h" +#include "hw/register.h" +#include "target/arm/cpu.h" + +#define TYPE_XLNX_VERSAL_CRL "xlnx,versal-crl" +OBJECT_DECLARE_SIMPLE_TYPE(XlnxVersalCRL, XLNX_VERSAL_CRL) + +REG32(ERR_CTRL, 0x0) + FIELD(ERR_CTRL, SLVERR_ENABLE, 0, 1) +REG32(IR_STATUS, 0x4) + FIELD(IR_STATUS, ADDR_DECODE_ERR, 0, 1) +REG32(IR_MASK, 0x8) + FIELD(IR_MASK, ADDR_DECODE_ERR, 0, 1) +REG32(IR_ENABLE, 0xc) + FIELD(IR_ENABLE, ADDR_DECODE_ERR, 0, 1) +REG32(IR_DISABLE, 0x10) + FIELD(IR_DISABLE, ADDR_DECODE_ERR, 0, 1) +REG32(WPROT, 0x1c) + FIELD(WPROT, ACTIVE, 0, 1) +REG32(PLL_CLK_OTHER_DMN, 0x20) + FIELD(PLL_CLK_OTHER_DMN, APLL_BYPASS, 0, 1) +REG32(RPLL_CTRL, 0x40) + FIELD(RPLL_CTRL, POST_SRC, 24, 3) + FIELD(RPLL_CTRL, PRE_SRC, 20, 3) + FIELD(RPLL_CTRL, CLKOUTDIV, 16, 2) + FIELD(RPLL_CTRL, FBDIV, 8, 8) + FIELD(RPLL_CTRL, BYPASS, 3, 1) + FIELD(RPLL_CTRL, RESET, 0, 1) +REG32(RPLL_CFG, 0x44) + FIELD(RPLL_CFG, LOCK_DLY, 25, 7) + FIELD(RPLL_CFG, LOCK_CNT, 13, 10) + FIELD(RPLL_CFG, LFHF, 10, 2) + FIELD(RPLL_CFG, CP, 5, 4) + FIELD(RPLL_CFG, RES, 0, 4) +REG32(RPLL_FRAC_CFG, 0x48) + FIELD(RPLL_FRAC_CFG, ENABLED, 31, 1) + FIELD(RPLL_FRAC_CFG, SEED, 22, 3) + FIELD(RPLL_FRAC_CFG, ALGRTHM, 19, 1) + FIELD(RPLL_FRAC_CFG, ORDER, 18, 1) + FIELD(RPLL_FRAC_CFG, DATA, 0, 16) +REG32(PLL_STATUS, 0x50) + FIELD(PLL_STATUS, RPLL_STABLE, 2, 1) + FIELD(PLL_STATUS, RPLL_LOCK, 0, 1) +REG32(RPLL_TO_XPD_CTRL, 0x100) + FIELD(RPLL_TO_XPD_CTRL, CLKACT, 25, 1) + FIELD(RPLL_TO_XPD_CTRL, DIVISOR0, 8, 10) +REG32(LPD_TOP_SWITCH_CTRL, 0x104) + FIELD(LPD_TOP_SWITCH_CTRL, CLKACT_ADMA, 26, 1) + FIELD(LPD_TOP_SWITCH_CTRL, CLKACT, 25, 1) + FIELD(LPD_TOP_SWITCH_CTRL, DIVISOR0, 8, 10) + FIELD(LPD_TOP_SWITCH_CTRL, SRCSEL, 0, 3) +REG32(LPD_LSBUS_CTRL, 0x108) + FIELD(LPD_LSBUS_CTRL, CLKACT, 25, 1) + FIELD(LPD_LSBUS_CTRL, DIVISOR0, 8, 10) + FIELD(LPD_LSBUS_CTRL, SRCSEL, 0, 3) +REG32(CPU_R5_CTRL, 0x10c) + FIELD(CPU_R5_CTRL, CLKACT_OCM2, 28, 1) + FIELD(CPU_R5_CTRL, CLKACT_OCM, 27, 1) + FIELD(CPU_R5_CTRL, CLKACT_CORE, 26, 1) + FIELD(CPU_R5_CTRL, CLKACT, 25, 1) + FIELD(CPU_R5_CTRL, DIVISOR0, 8, 10) + FIELD(CPU_R5_CTRL, SRCSEL, 0, 3) +REG32(IOU_SWITCH_CTRL, 0x114) + FIELD(IOU_SWITCH_CTRL, CLKACT, 25, 1) + FIELD(IOU_SWITCH_CTRL, DIVISOR0, 8, 10) + FIELD(IOU_SWITCH_CTRL, SRCSEL, 0, 3) +REG32(GEM0_REF_CTRL, 0x118) + FIELD(GEM0_REF_CTRL, CLKACT_RX, 27, 1) + FIELD(GEM0_REF_CTRL, CLKACT_TX, 26, 1) + FIELD(GEM0_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM0_REF_CTRL, SRCSEL, 0, 3) +REG32(GEM1_REF_CTRL, 0x11c) + FIELD(GEM1_REF_CTRL, CLKACT_RX, 27, 1) + FIELD(GEM1_REF_CTRL, CLKACT_TX, 26, 1) + FIELD(GEM1_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM1_REF_CTRL, SRCSEL, 0, 3) +REG32(GEM_TSU_REF_CTRL, 0x120) + FIELD(GEM_TSU_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM_TSU_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM_TSU_REF_CTRL, SRCSEL, 0, 3) +REG32(USB0_BUS_REF_CTRL, 0x124) + FIELD(USB0_BUS_REF_CTRL, CLKACT, 25, 1) + FIELD(USB0_BUS_REF_CTRL, DIVISOR0, 8, 10) + FIELD(USB0_BUS_REF_CTRL, SRCSEL, 0, 3) +REG32(UART0_REF_CTRL, 0x128) + FIELD(UART0_REF_CTRL, CLKACT, 25, 1) + FIELD(UART0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(UART0_REF_CTRL, SRCSEL, 0, 3) +REG32(UART1_REF_CTRL, 0x12c) + FIELD(UART1_REF_CTRL, CLKACT, 25, 1) + FIELD(UART1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(UART1_REF_CTRL, SRCSEL, 0, 3) +REG32(SPI0_REF_CTRL, 0x130) + FIELD(SPI0_REF_CTRL, CLKACT, 25, 1) + FIELD(SPI0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(SPI0_REF_CTRL, SRCSEL, 0, 3) +REG32(SPI1_REF_CTRL, 0x134) + FIELD(SPI1_REF_CTRL, CLKACT, 25, 1) + FIELD(SPI1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(SPI1_REF_CTRL, SRCSEL, 0, 3) +REG32(CAN0_REF_CTRL, 0x138) + FIELD(CAN0_REF_CTRL, CLKACT, 25, 1) + FIELD(CAN0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CAN0_REF_CTRL, SRCSEL, 0, 3) +REG32(CAN1_REF_CTRL, 0x13c) + FIELD(CAN1_REF_CTRL, CLKACT, 25, 1) + FIELD(CAN1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CAN1_REF_CTRL, SRCSEL, 0, 3) +REG32(I2C0_REF_CTRL, 0x140) + FIELD(I2C0_REF_CTRL, CLKACT, 25, 1) + FIELD(I2C0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(I2C0_REF_CTRL, SRCSEL, 0, 3) +REG32(I2C1_REF_CTRL, 0x144) + FIELD(I2C1_REF_CTRL, CLKACT, 25, 1) + FIELD(I2C1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(I2C1_REF_CTRL, SRCSEL, 0, 3) +REG32(DBG_LPD_CTRL, 0x148) + FIELD(DBG_LPD_CTRL, CLKACT, 25, 1) + FIELD(DBG_LPD_CTRL, DIVISOR0, 8, 10) + FIELD(DBG_LPD_CTRL, SRCSEL, 0, 3) +REG32(TIMESTAMP_REF_CTRL, 0x14c) + FIELD(TIMESTAMP_REF_CTRL, CLKACT, 25, 1) + FIELD(TIMESTAMP_REF_CTRL, DIVISOR0, 8, 10) + FIELD(TIMESTAMP_REF_CTRL, SRCSEL, 0, 3) +REG32(CRL_SAFETY_CHK, 0x150) +REG32(PSM_REF_CTRL, 0x154) + FIELD(PSM_REF_CTRL, DIVISOR0, 8, 10) + FIELD(PSM_REF_CTRL, SRCSEL, 0, 3) +REG32(DBG_TSTMP_CTRL, 0x158) + FIELD(DBG_TSTMP_CTRL, CLKACT, 25, 1) + FIELD(DBG_TSTMP_CTRL, DIVISOR0, 8, 10) + FIELD(DBG_TSTMP_CTRL, SRCSEL, 0, 3) +REG32(CPM_TOPSW_REF_CTRL, 0x15c) + FIELD(CPM_TOPSW_REF_CTRL, CLKACT, 25, 1) + FIELD(CPM_TOPSW_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CPM_TOPSW_REF_CTRL, SRCSEL, 0, 3) +REG32(USB3_DUAL_REF_CTRL, 0x160) + FIELD(USB3_DUAL_REF_CTRL, CLKACT, 25, 1) + FIELD(USB3_DUAL_REF_CTRL, DIVISOR0, 8, 10) + FIELD(USB3_DUAL_REF_CTRL, SRCSEL, 0, 3) +REG32(RST_CPU_R5, 0x300) + FIELD(RST_CPU_R5, RESET_PGE, 4, 1) + FIELD(RST_CPU_R5, RESET_AMBA, 2, 1) + FIELD(RST_CPU_R5, RESET_CPU1, 1, 1) + FIELD(RST_CPU_R5, RESET_CPU0, 0, 1) +REG32(RST_ADMA, 0x304) + FIELD(RST_ADMA, RESET, 0, 1) +REG32(RST_GEM0, 0x308) + FIELD(RST_GEM0, RESET, 0, 1) +REG32(RST_GEM1, 0x30c) + FIELD(RST_GEM1, RESET, 0, 1) +REG32(RST_SPARE, 0x310) + FIELD(RST_SPARE, RESET, 0, 1) +REG32(RST_USB0, 0x314) + FIELD(RST_USB0, RESET, 0, 1) +REG32(RST_UART0, 0x318) + FIELD(RST_UART0, RESET, 0, 1) +REG32(RST_UART1, 0x31c) + FIELD(RST_UART1, RESET, 0, 1) +REG32(RST_SPI0, 0x320) + FIELD(RST_SPI0, RESET, 0, 1) +REG32(RST_SPI1, 0x324) + FIELD(RST_SPI1, RESET, 0, 1) +REG32(RST_CAN0, 0x328) + FIELD(RST_CAN0, RESET, 0, 1) +REG32(RST_CAN1, 0x32c) + FIELD(RST_CAN1, RESET, 0, 1) +REG32(RST_I2C0, 0x330) + FIELD(RST_I2C0, RESET, 0, 1) +REG32(RST_I2C1, 0x334) + FIELD(RST_I2C1, RESET, 0, 1) +REG32(RST_DBG_LPD, 0x338) + FIELD(RST_DBG_LPD, RPU_DBG1_RESET, 5, 1) + FIELD(RST_DBG_LPD, RPU_DBG0_RESET, 4, 1) + FIELD(RST_DBG_LPD, RESET_HSDP, 1, 1) + FIELD(RST_DBG_LPD, RESET, 0, 1) +REG32(RST_GPIO, 0x33c) + FIELD(RST_GPIO, RESET, 0, 1) +REG32(RST_TTC, 0x344) + FIELD(RST_TTC, TTC3_RESET, 3, 1) + FIELD(RST_TTC, TTC2_RESET, 2, 1) + FIELD(RST_TTC, TTC1_RESET, 1, 1) + FIELD(RST_TTC, TTC0_RESET, 0, 1) +REG32(RST_TIMESTAMP, 0x348) + FIELD(RST_TIMESTAMP, RESET, 0, 1) +REG32(RST_SWDT, 0x34c) + FIELD(RST_SWDT, RESET, 0, 1) +REG32(RST_OCM, 0x350) + FIELD(RST_OCM, RESET, 0, 1) +REG32(RST_IPI, 0x354) + FIELD(RST_IPI, RESET, 0, 1) +REG32(RST_SYSMON, 0x358) + FIELD(RST_SYSMON, SEQ_RST, 1, 1) + FIELD(RST_SYSMON, CFG_RST, 0, 1) +REG32(RST_FPD, 0x360) + FIELD(RST_FPD, SRST, 1, 1) + FIELD(RST_FPD, POR, 0, 1) +REG32(PSM_RST_MODE, 0x370) + FIELD(PSM_RST_MODE, WAKEUP, 2, 1) + FIELD(PSM_RST_MODE, RST_MODE, 0, 2) + +#define CRL_R_MAX (R_PSM_RST_MODE + 1) + +#define RPU_MAX_CPU 2 + +struct XlnxVersalCRL { + SysBusDevice parent_obj; + qemu_irq irq; + + struct { + ARMCPU *cpu_r5[RPU_MAX_CPU]; + DeviceState *adma[8]; + DeviceState *uart[2]; + DeviceState *gem[2]; + DeviceState *usb; + } cfg; + + RegisterInfoArray *reg_array; + uint32_t regs[CRL_R_MAX]; + RegisterInfo regs_info[CRL_R_MAX]; +}; +#endif diff --git a/hw/misc/xlnx-versal-crl.c b/hw/misc/xlnx-versal-crl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/xlnx-versal-crl.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Clock-Reset-LPD (CRL). + * + * Copyright (c) 2022 Advanced Micro Devices, Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Edgar E. Iglesias <edgar.iglesias@amd.com> + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "qemu/bitops.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/register.h" +#include "hw/resettable.h" + +#include "target/arm/arm-powerctl.h" +#include "hw/misc/xlnx-versal-crl.h" + +#ifndef XLNX_VERSAL_CRL_ERR_DEBUG +#define XLNX_VERSAL_CRL_ERR_DEBUG 0 +#endif + +static void crl_update_irq(XlnxVersalCRL *s) +{ + bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK]; + qemu_set_irq(s->irq, pending); +} + +static void crl_status_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + crl_update_irq(s); +} + +static uint64_t crl_enable_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] &= ~val; + crl_update_irq(s); + return 0; +} + +static uint64_t crl_disable_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] |= val; + crl_update_irq(s); + return 0; +} + +static void crl_reset_dev(XlnxVersalCRL *s, DeviceState *dev, + bool rst_old, bool rst_new) +{ + device_cold_reset(dev); +} + +static void crl_reset_cpu(XlnxVersalCRL *s, ARMCPU *armcpu, + bool rst_old, bool rst_new) +{ + if (rst_new) { + arm_set_cpu_off(armcpu->mp_affinity); + } else { + arm_set_cpu_on_and_reset(armcpu->mp_affinity); + } +} + +#define REGFIELD_RESET(type, s, reg, f, new_val, dev) { \ + bool old_f = ARRAY_FIELD_EX32((s)->regs, reg, f); \ + bool new_f = FIELD_EX32(new_val, reg, f); \ + \ + /* Detect edges. */ \ + if (dev && old_f != new_f) { \ + crl_reset_ ## type(s, dev, old_f, new_f); \ + } \ +} + +static uint64_t crl_rst_r5_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(cpu, s, RST_CPU_R5, RESET_CPU0, val64, s->cfg.cpu_r5[0]); + REGFIELD_RESET(cpu, s, RST_CPU_R5, RESET_CPU1, val64, s->cfg.cpu_r5[1]); + return val64; +} + +static uint64_t crl_rst_adma_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + int i; + + /* A single register fans out to all ADMA reset inputs. */ + for (i = 0; i < ARRAY_SIZE(s->cfg.adma); i++) { + REGFIELD_RESET(dev, s, RST_ADMA, RESET, val64, s->cfg.adma[i]); + } + return val64; +} + +static uint64_t crl_rst_uart0_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_UART0, RESET, val64, s->cfg.uart[0]); + return val64; +} + +static uint64_t crl_rst_uart1_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_UART1, RESET, val64, s->cfg.uart[1]); + return val64; +} + +static uint64_t crl_rst_gem0_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_GEM0, RESET, val64, s->cfg.gem[0]); + return val64; +} + +static uint64_t crl_rst_gem1_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_GEM1, RESET, val64, s->cfg.gem[1]); + return val64; +} + +static uint64_t crl_rst_usb_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_USB0, RESET, val64, s->cfg.usb); + return val64; +} + +static const RegisterAccessInfo crl_regs_info[] = { + { .name = "ERR_CTRL", .addr = A_ERR_CTRL, + },{ .name = "IR_STATUS", .addr = A_IR_STATUS, + .w1c = 0x1, + .post_write = crl_status_postw, + },{ .name = "IR_MASK", .addr = A_IR_MASK, + .reset = 0x1, + .ro = 0x1, + },{ .name = "IR_ENABLE", .addr = A_IR_ENABLE, + .pre_write = crl_enable_prew, + },{ .name = "IR_DISABLE", .addr = A_IR_DISABLE, + .pre_write = crl_disable_prew, + },{ .name = "WPROT", .addr = A_WPROT, + },{ .name = "PLL_CLK_OTHER_DMN", .addr = A_PLL_CLK_OTHER_DMN, + .reset = 0x1, + .rsvd = 0xe, + },{ .name = "RPLL_CTRL", .addr = A_RPLL_CTRL, + .reset = 0x24809, + .rsvd = 0xf88c00f6, + },{ .name = "RPLL_CFG", .addr = A_RPLL_CFG, + .reset = 0x2000000, + .rsvd = 0x1801210, + },{ .name = "RPLL_FRAC_CFG", .addr = A_RPLL_FRAC_CFG, + .rsvd = 0x7e330000, + },{ .name = "PLL_STATUS", .addr = A_PLL_STATUS, + .reset = R_PLL_STATUS_RPLL_STABLE_MASK | + R_PLL_STATUS_RPLL_LOCK_MASK, + .rsvd = 0xfa, + .ro = 0x5, + },{ .name = "RPLL_TO_XPD_CTRL", .addr = A_RPLL_TO_XPD_CTRL, + .reset = 0x2000100, + .rsvd = 0xfdfc00ff, + },{ .name = "LPD_TOP_SWITCH_CTRL", .addr = A_LPD_TOP_SWITCH_CTRL, + .reset = 0x6000300, + .rsvd = 0xf9fc00f8, + },{ .name = "LPD_LSBUS_CTRL", .addr = A_LPD_LSBUS_CTRL, + .reset = 0x2000800, + .rsvd = 0xfdfc00f8, + },{ .name = "CPU_R5_CTRL", .addr = A_CPU_R5_CTRL, + .reset = 0xe000300, + .rsvd = 0xe1fc00f8, + },{ .name = "IOU_SWITCH_CTRL", .addr = A_IOU_SWITCH_CTRL, + .reset = 0x2000500, + .rsvd = 0xfdfc00f8, + },{ .name = "GEM0_REF_CTRL", .addr = A_GEM0_REF_CTRL, + .reset = 0xe000a00, + .rsvd = 0xf1fc00f8, + },{ .name = "GEM1_REF_CTRL", .addr = A_GEM1_REF_CTRL, + .reset = 0xe000a00, + .rsvd = 0xf1fc00f8, + },{ .name = "GEM_TSU_REF_CTRL", .addr = A_GEM_TSU_REF_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "USB0_BUS_REF_CTRL", .addr = A_USB0_BUS_REF_CTRL, + .reset = 0x2001900, + .rsvd = 0xfdfc00f8, + },{ .name = "UART0_REF_CTRL", .addr = A_UART0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "UART1_REF_CTRL", .addr = A_UART1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "SPI0_REF_CTRL", .addr = A_SPI0_REF_CTRL, + .reset = 0x600, + .rsvd = 0xfdfc00f8, + },{ .name = "SPI1_REF_CTRL", .addr = A_SPI1_REF_CTRL, + .reset = 0x600, + .rsvd = 0xfdfc00f8, + },{ .name = "CAN0_REF_CTRL", .addr = A_CAN0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "CAN1_REF_CTRL", .addr = A_CAN1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "I2C0_REF_CTRL", .addr = A_I2C0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "I2C1_REF_CTRL", .addr = A_I2C1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "DBG_LPD_CTRL", .addr = A_DBG_LPD_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "TIMESTAMP_REF_CTRL", .addr = A_TIMESTAMP_REF_CTRL, + .reset = 0x2000c00, + .rsvd = 0xfdfc00f8, + },{ .name = "CRL_SAFETY_CHK", .addr = A_CRL_SAFETY_CHK, + },{ .name = "PSM_REF_CTRL", .addr = A_PSM_REF_CTRL, + .reset = 0xf04, + .rsvd = 0xfffc00f8, + },{ .name = "DBG_TSTMP_CTRL", .addr = A_DBG_TSTMP_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "CPM_TOPSW_REF_CTRL", .addr = A_CPM_TOPSW_REF_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "USB3_DUAL_REF_CTRL", .addr = A_USB3_DUAL_REF_CTRL, + .reset = 0x3c00, + .rsvd = 0xfdfc00f8, + },{ .name = "RST_CPU_R5", .addr = A_RST_CPU_R5, + .reset = 0x17, + .rsvd = 0x8, + .pre_write = crl_rst_r5_prew, + },{ .name = "RST_ADMA", .addr = A_RST_ADMA, + .reset = 0x1, + .pre_write = crl_rst_adma_prew, + },{ .name = "RST_GEM0", .addr = A_RST_GEM0, + .reset = 0x1, + .pre_write = crl_rst_gem0_prew, + },{ .name = "RST_GEM1", .addr = A_RST_GEM1, + .reset = 0x1, + .pre_write = crl_rst_gem1_prew, + },{ .name = "RST_SPARE", .addr = A_RST_SPARE, + .reset = 0x1, + },{ .name = "RST_USB0", .addr = A_RST_USB0, + .reset = 0x1, + .pre_write = crl_rst_usb_prew, + },{ .name = "RST_UART0", .addr = A_RST_UART0, + .reset = 0x1, + .pre_write = crl_rst_uart0_prew, + },{ .name = "RST_UART1", .addr = A_RST_UART1, + .reset = 0x1, + .pre_write = crl_rst_uart1_prew, + },{ .name = "RST_SPI0", .addr = A_RST_SPI0, + .reset = 0x1, + },{ .name = "RST_SPI1", .addr = A_RST_SPI1, + .reset = 0x1, + },{ .name = "RST_CAN0", .addr = A_RST_CAN0, + .reset = 0x1, + },{ .name = "RST_CAN1", .addr = A_RST_CAN1, + .reset = 0x1, + },{ .name = "RST_I2C0", .addr = A_RST_I2C0, + .reset = 0x1, + },{ .name = "RST_I2C1", .addr = A_RST_I2C1, + .reset = 0x1, + },{ .name = "RST_DBG_LPD", .addr = A_RST_DBG_LPD, + .reset = 0x33, + .rsvd = 0xcc, + },{ .name = "RST_GPIO", .addr = A_RST_GPIO, + .reset = 0x1, + },{ .name = "RST_TTC", .addr = A_RST_TTC, + .reset = 0xf, + },{ .name = "RST_TIMESTAMP", .addr = A_RST_TIMESTAMP, + .reset = 0x1, + },{ .name = "RST_SWDT", .addr = A_RST_SWDT, + .reset = 0x1, + },{ .name = "RST_OCM", .addr = A_RST_OCM, + },{ .name = "RST_IPI", .addr = A_RST_IPI, + },{ .name = "RST_FPD", .addr = A_RST_FPD, + .reset = 0x3, + },{ .name = "PSM_RST_MODE", .addr = A_PSM_RST_MODE, + .reset = 0x1, + .rsvd = 0xf8, + } +}; + +static void crl_reset_enter(Object *obj, ResetType type) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } +} + +static void crl_reset_hold(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + + crl_update_irq(s); +} + +static const MemoryRegionOps crl_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void crl_init(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + int i; + + s->reg_array = + register_init_block32(DEVICE(obj), crl_regs_info, + ARRAY_SIZE(crl_regs_info), + s->regs_info, s->regs, + &crl_ops, + XLNX_VERSAL_CRL_ERR_DEBUG, + CRL_R_MAX * 4); + sysbus_init_mmio(sbd, &s->reg_array->mem); + sysbus_init_irq(sbd, &s->irq); + + for (i = 0; i < ARRAY_SIZE(s->cfg.cpu_r5); ++i) { + object_property_add_link(obj, "cpu_r5[*]", TYPE_ARM_CPU, + (Object **)&s->cfg.cpu_r5[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.adma); ++i) { + object_property_add_link(obj, "adma[*]", TYPE_DEVICE, + (Object **)&s->cfg.adma[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.uart); ++i) { + object_property_add_link(obj, "uart[*]", TYPE_DEVICE, + (Object **)&s->cfg.uart[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.gem); ++i) { + object_property_add_link(obj, "gem[*]", TYPE_DEVICE, + (Object **)&s->cfg.gem[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + object_property_add_link(obj, "usb", TYPE_DEVICE, + (Object **)&s->cfg.gem[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); +} + +static void crl_finalize(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + register_finalize_block(s->reg_array); +} + +static const VMStateDescription vmstate_crl = { + .name = TYPE_XLNX_VERSAL_CRL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, XlnxVersalCRL, CRL_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void crl_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_crl; + + rc->phases.enter = crl_reset_enter; + rc->phases.hold = crl_reset_hold; +} + +static const TypeInfo crl_info = { + .name = TYPE_XLNX_VERSAL_CRL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxVersalCRL), + .class_init = crl_class_init, + .instance_init = crl_init, + .instance_finalize = crl_finalize, +}; + +static void crl_register_types(void) +{ + type_register_static(&crl_info); +} + +type_init(crl_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c')) softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c')) specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-crf.c')) specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-apu-ctrl.c')) +specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-crl.c')) softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files( 'xlnx-versal-xramc.c', 'xlnx-versal-pmc-iou-slcr.c', -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Connect the CRL (Clock Reset LPD) to the Versal SoC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-5-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 4 +++ hw/arm/xlnx-versal.c | 54 ++++++++++++++++++++++++++++++++++-- 2 files changed, 56 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/xlnx-versal-efuse.h" #include "hw/ssi/xlnx-versal-ospi.h" #include "hw/dma/xlnx_csu_dma.h" +#include "hw/misc/xlnx-versal-crl.h" #include "hw/misc/xlnx-versal-pmc-iou-slcr.h" #define TYPE_XLNX_VERSAL "xlnx-versal" @@ -XXX,XX +XXX,XX @@ struct Versal { qemu_or_irq irq_orgate; XlnxXramCtrl ctrl[XLNX_VERSAL_NR_XRAM]; } xram; + + XlnxVersalCRL crl; } lpd; /* The Platform Management Controller subsystem. */ @@ -XXX,XX +XXX,XX @@ struct Versal { #define VERSAL_TIMER_NS_EL1_IRQ 14 #define VERSAL_TIMER_NS_EL2_IRQ 10 +#define VERSAL_CRL_IRQ 10 #define VERSAL_UART0_IRQ_0 18 #define VERSAL_UART1_IRQ_0 19 #define VERSAL_USB0_IRQ_0 22 diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_ospi(Versal *s, qemu_irq *pic) qdev_connect_gpio_out(orgate, 0, pic[VERSAL_OSPI_IRQ]); } +static void versal_create_crl(Versal *s, qemu_irq *pic) +{ + SysBusDevice *sbd; + int i; + + object_initialize_child(OBJECT(s), "crl", &s->lpd.crl, + TYPE_XLNX_VERSAL_CRL); + sbd = SYS_BUS_DEVICE(&s->lpd.crl); + + for (i = 0; i < ARRAY_SIZE(s->lpd.rpu.cpu); i++) { + g_autofree gchar *name = g_strdup_printf("cpu_r5[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.rpu.cpu[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.gem); i++) { + g_autofree gchar *name = g_strdup_printf("gem[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.gem[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.adma); i++) { + g_autofree gchar *name = g_strdup_printf("adma[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.adma[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.uart); i++) { + g_autofree gchar *name = g_strdup_printf("uart[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.uart[i]), + &error_abort); + } + + object_property_set_link(OBJECT(&s->lpd.crl), + "usb", OBJECT(&s->lpd.iou.usb), + &error_abort); + + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(&s->mr_ps, MM_CRL, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, pic[VERSAL_CRL_IRQ]); +} + /* This takes the board allocated linear DDR memory and creates aliases * for each split DDR range/aperture on the Versal address map. */ @@ -XXX,XX +XXX,XX @@ static void versal_unimp(Versal *s) versal_unimp_area(s, "psm", &s->mr_ps, MM_PSM_START, MM_PSM_END - MM_PSM_START); - versal_unimp_area(s, "crl", &s->mr_ps, - MM_CRL, MM_CRL_SIZE); versal_unimp_area(s, "crf", &s->mr_ps, MM_FPD_CRF, MM_FPD_CRF_SIZE); versal_unimp_area(s, "apu", &s->mr_ps, @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_efuse(s, pic); versal_create_pmc_iou_slcr(s, pic); versal_create_ospi(s, pic); + versal_create_crl(s, pic); versal_map_ddr(s); versal_unimp(s); -- 2.25.1 The Exynos4210 SoC device currently uses a custom device "exynos4210.irq_gate" to model the OR gate that feeds each CPU's IRQ line. We have a standard TYPE_OR_IRQ device for this now, so use that instead. (This is a migration compatibility break, but that is OK for this machine type.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-2-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 + hw/arm/exynos4210.c | 31 ++++++++++++++++--------------- 2 files changed, 17 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { MemoryRegion bootreg_mem; I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER]; qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; + qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) { Exynos4210State *s = EXYNOS4210_SOC(socdev); MemoryRegion *system_mem = get_system_memory(); - qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS]; SysBusDevice *busdev; DeviceState *dev, *uart[4], *pl330[3]; int i, n; @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) /* IRQ Gate */ for (i = 0; i < EXYNOS4210_NCPUS; i++) { - dev = qdev_new("exynos4210.irq_gate"); - qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS); - sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); - /* Get IRQ Gate input in gate_irq */ - for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) { - gate_irq[i][n] = qdev_get_gpio_in(dev, n); - } - busdev = SYS_BUS_DEVICE(dev); - - /* Connect IRQ Gate output to CPU's IRQ line */ - sysbus_connect_irq(busdev, 0, - qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); + DeviceState *orgate = DEVICE(&s->cpu_irq_orgate[i]); + object_property_set_int(OBJECT(orgate), "num-lines", + EXYNOS4210_IRQ_GATE_NINPUTS, + &error_abort); + qdev_realize(orgate, NULL, &error_abort); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); } /* Private memory region and Internal GIC */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { - sysbus_connect_irq(busdev, n, gate_irq[n][0]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) /* Map Distributer interface */ sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { - sysbus_connect_irq(busdev, n, gate_irq[n][1]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n); @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, name, orgate, TYPE_OR_IRQ); g_free(name); } + + for (i = 0; i < ARRAY_SIZE(s->cpu_irq_orgate); i++) { + g_autofree char *name = g_strdup_printf("cpu-irq-orgate%d", i); + object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); + } } static void exynos4210_class_init(ObjectClass *klass, void *data) -- 2.25.1 Now we have removed the only use of TYPE_EXYNOS4210_IRQ_GATE we can delete the device entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220404154658.565020-3-peter.maydell@linaro.org --- hw/intc/exynos4210_gic.c | 107 --------------------------------------- 1 file changed, 107 deletions(-) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_gic_register_types(void) } type_init(exynos4210_gic_register_types) - -/* IRQ OR Gate struct. - * - * This device models an OR gate. There are n_in input qdev gpio lines and one - * output sysbus IRQ line. The output IRQ level is formed as OR between all - * gpio inputs. - */ - -#define TYPE_EXYNOS4210_IRQ_GATE "exynos4210.irq_gate" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210IRQGateState, EXYNOS4210_IRQ_GATE) - -struct Exynos4210IRQGateState { - SysBusDevice parent_obj; - - uint32_t n_in; /* inputs amount */ - uint32_t *level; /* input levels */ - qemu_irq out; /* output IRQ */ -}; - -static Property exynos4210_irq_gate_properties[] = { - DEFINE_PROP_UINT32("n_in", Exynos4210IRQGateState, n_in, 1), - DEFINE_PROP_END_OF_LIST(), -}; - -static const VMStateDescription vmstate_exynos4210_irq_gate = { - .name = "exynos4210.irq_gate", - .version_id = 2, - .minimum_version_id = 2, - .fields = (VMStateField[]) { - VMSTATE_VBUFFER_UINT32(level, Exynos4210IRQGateState, 1, NULL, n_in), - VMSTATE_END_OF_LIST() - } -}; - -/* Process a change in IRQ input. */ -static void exynos4210_irq_gate_handler(void *opaque, int irq, int level) -{ - Exynos4210IRQGateState *s = (Exynos4210IRQGateState *)opaque; - uint32_t i; - - assert(irq < s->n_in); - - s->level[irq] = level; - - for (i = 0; i < s->n_in; i++) { - if (s->level[i] >= 1) { - qemu_irq_raise(s->out); - return; - } - } - - qemu_irq_lower(s->out); -} - -static void exynos4210_irq_gate_reset(DeviceState *d) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(d); - - memset(s->level, 0, s->n_in * sizeof(*s->level)); -} - -/* - * IRQ Gate initialization. - */ -static void exynos4210_irq_gate_init(Object *obj) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(obj); - SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - - sysbus_init_irq(sbd, &s->out); -} - -static void exynos4210_irq_gate_realize(DeviceState *dev, Error **errp) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(dev); - - /* Allocate general purpose input signals and connect a handler to each of - * them */ - qdev_init_gpio_in(dev, exynos4210_irq_gate_handler, s->n_in); - - s->level = g_malloc0(s->n_in * sizeof(*s->level)); -} - -static void exynos4210_irq_gate_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->reset = exynos4210_irq_gate_reset; - dc->vmsd = &vmstate_exynos4210_irq_gate; - device_class_set_props(dc, exynos4210_irq_gate_properties); - dc->realize = exynos4210_irq_gate_realize; -} - -static const TypeInfo exynos4210_irq_gate_info = { - .name = TYPE_EXYNOS4210_IRQ_GATE, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(Exynos4210IRQGateState), - .instance_init = exynos4210_irq_gate_init, - .class_init = exynos4210_irq_gate_class_init, -}; - -static void exynos4210_irq_gate_register_types(void) -{ - type_register_static(&exynos4210_irq_gate_info); -} - -type_init(exynos4210_irq_gate_register_types) -- 2.25.1 The exynos4210 SoC mostly creates its child devices as if it were board code. This includes the a9mpcore object. Switch that to a new-style "embedded in the state struct" creation, because in the next commit we're going to want to refer to the object again further down in the exynos4210_realize() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-4-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 ++ hw/arm/exynos4210.c | 11 ++++++----- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/sysbus.h" +#include "hw/cpu/a9mpcore.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER]; qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; + A9MPPrivState a9mpcore; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) } /* Private memory region and Internal GIC */ - dev = qdev_new(TYPE_A9MPCORE_PRIV); - qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->a9mpcore), "num-cpu", EXYNOS4210_NCPUS); + busdev = SYS_BUS_DEVICE(&s->a9mpcore); + sysbus_realize(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { - s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n); + s->irqs.int_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->a9mpcore), n); } /* Cache controller */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) g_autofree char *name = g_strdup_printf("cpu-irq-orgate%d", i); object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); } + + object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); } static void exynos4210_class_init(ObjectClass *klass, void *data) -- 2.25.1 The only time we use the int_gic_irq[] array in the Exynos4210Irq struct is in the exynos4210_realize() function: we initialize it with the GPIO inputs of the a9mpcore device, and then a bit later on we connect those to the outputs of the internal combiner. Now that the a9mpcore object is easily accessible as s->a9mpcore we can make the connection directly from one device to the other without going via this array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-5-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 - hw/arm/exynos4210.c | 6 ++---- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; - qemu_irq int_gic_irq[EXYNOS4210_INT_GIC_NIRQ]; qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; } Exynos4210Irq; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } - for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { - s->irqs.int_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->a9mpcore), n); - } /* Cache controller */ sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { - sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } exynos4210_combiner_get_gpioin(&s->irqs, dev, 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); -- 2.25.1 The exynos4210 code currently has two very similar arrays of IRQs: * board_irqs is a field of the Exynos4210Irq struct which is filled in by exynos4210_init_board_irqs() with the appropriate qemu_irqs for each IRQ the board/SoC can assert * irq_table is a set of qemu_irqs pointed to from the Exynos4210State struct. It's allocated in exynos4210_init_irq, and the only behaviour these irqs have is that they pass on the level to the equivalent board_irqs[] irq The extra indirection through irq_table is unnecessary, so coalesce these into a single irq_table[] array as a direct field in Exynos4210State which exynos4210_init_board_irqs() fills in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-6-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 8 ++------ hw/arm/exynos4210.c | 6 +----- hw/intc/exynos4210_gic.c | 32 ++++++++------------------------ 3 files changed, 11 insertions(+), 35 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; - qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; } Exynos4210Irq; struct Exynos4210State { @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { /*< public >*/ ARMCPU *cpu[EXYNOS4210_NCPUS]; Exynos4210Irq irqs; - qemu_irq *irq_table; + qemu_irq irq_table[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; MemoryRegion chipid_mem; MemoryRegion iram_mem; @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210State, EXYNOS4210_SOC) void exynos4210_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info); -/* Initialize exynos4210 IRQ subsystem stub */ -qemu_irq *exynos4210_init_irq(Exynos4210Irq *env); - /* Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs */ -void exynos4210_init_board_irqs(Exynos4210Irq *s); +void exynos4210_init_board_irqs(Exynos4210State *s); /* Get IRQ number from exynos4210 IRQ subsystem stub. * To identify IRQ source use internal combiner group and bit number diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); } - /*** IRQs ***/ - - s->irq_table = exynos4210_init_irq(&s->irqs); - /* IRQ Gate */ for (i = 0; i < EXYNOS4210_NCPUS; i++) { DeviceState *orgate = DEVICE(&s->cpu_irq_orgate[i]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ - exynos4210_init_board_irqs(&s->irqs); + exynos4210_init_board_irqs(s); /*** Memory ***/ diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64-EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -static void exynos4210_irq_handler(void *opaque, int irq, int level) -{ - Exynos4210Irq *s = (Exynos4210Irq *)opaque; - - /* Bypass */ - qemu_set_irq(s->board_irqs[irq], level); -} - -/* - * Initialize exynos4210 IRQ subsystem stub. - */ -qemu_irq *exynos4210_init_irq(Exynos4210Irq *s) -{ - return qemu_allocate_irqs(exynos4210_irq_handler, s, - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ); -} - /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. */ -void exynos4210_init_board_irqs(Exynos4210Irq *s) +void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; + Exynos4210Irq *is = &s->irqs; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ void exynos4210_init_board_irqs(Exynos4210Irq *s) irq_id = EXT_GIC_ID_MCT_G1; } if (irq_id) { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_gic_irq[irq_id-32]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); } else { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_combiner_irq[n]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { @@ -XXX,XX +XXX,XX @@ void exynos4210_init_board_irqs(Exynos4210Irq *s) EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; if (irq_id) { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_gic_irq[irq_id-32]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); } } } -- 2.25.1 Fix a missing set of spaces around '-' in the definition of combiner_grp_to_gic_id[]. We're about to move this code, so fix the style issue first to keep checkpatch happy with the code-motion patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-7-peter.maydell@linaro.org --- hw/intc/exynos4210_gic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ enum ExtInt { */ static const uint32_t -combiner_grp_to_gic_id[64-EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { +combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* int combiner groups 16-19 */ { }, { }, { }, { }, /* int combiner group 20 */ -- 2.25.1 The function exynos4210_init_board_irqs() currently lives in exynos4210_gic.c, but it isn't really part of the exynos4210.gic device -- it is a function that implements (some of) the wiring up of interrupts between the SoC's GIC and combiner components. This means it fits better in exynos4210.c, which is the SoC-level code. Move it there. Similarly, exynos4210_git_irq() is used almost only in the SoC-level code, so move it too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-8-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 4 - hw/arm/exynos4210.c | 202 +++++++++++++++++++++++++++++++++++ hw/intc/exynos4210_gic.c | 204 ------------------------------------ 3 files changed, 202 insertions(+), 208 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210State, EXYNOS4210_SOC) void exynos4210_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info); -/* Initialize board IRQs. - * These IRQs contain splitted Int/External Combiner and External Gic IRQs */ -void exynos4210_init_board_irqs(Exynos4210State *s); - /* Get IRQ number from exynos4210 IRQ subsystem stub. * To identify IRQ source use internal combiner group and bit number * grp - group number diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_PL330_BASE1_ADDR 0x12690000 #define EXYNOS4210_PL330_BASE2_ADDR 0x12850000 +enum ExtGicId { + EXT_GIC_ID_MDMA_LCD0 = 66, + EXT_GIC_ID_PDMA0, + EXT_GIC_ID_PDMA1, + EXT_GIC_ID_TIMER0, + EXT_GIC_ID_TIMER1, + EXT_GIC_ID_TIMER2, + EXT_GIC_ID_TIMER3, + EXT_GIC_ID_TIMER4, + EXT_GIC_ID_MCT_L0, + EXT_GIC_ID_WDT, + EXT_GIC_ID_RTC_ALARM, + EXT_GIC_ID_RTC_TIC, + EXT_GIC_ID_GPIO_XB, + EXT_GIC_ID_GPIO_XA, + EXT_GIC_ID_MCT_L1, + EXT_GIC_ID_IEM_APC, + EXT_GIC_ID_IEM_IEC, + EXT_GIC_ID_NFC, + EXT_GIC_ID_UART0, + EXT_GIC_ID_UART1, + EXT_GIC_ID_UART2, + EXT_GIC_ID_UART3, + EXT_GIC_ID_UART4, + EXT_GIC_ID_MCT_G0, + EXT_GIC_ID_I2C0, + EXT_GIC_ID_I2C1, + EXT_GIC_ID_I2C2, + EXT_GIC_ID_I2C3, + EXT_GIC_ID_I2C4, + EXT_GIC_ID_I2C5, + EXT_GIC_ID_I2C6, + EXT_GIC_ID_I2C7, + EXT_GIC_ID_SPI0, + EXT_GIC_ID_SPI1, + EXT_GIC_ID_SPI2, + EXT_GIC_ID_MCT_G1, + EXT_GIC_ID_USB_HOST, + EXT_GIC_ID_USB_DEVICE, + EXT_GIC_ID_MODEMIF, + EXT_GIC_ID_HSMMC0, + EXT_GIC_ID_HSMMC1, + EXT_GIC_ID_HSMMC2, + EXT_GIC_ID_HSMMC3, + EXT_GIC_ID_SDMMC, + EXT_GIC_ID_MIPI_CSI_4LANE, + EXT_GIC_ID_MIPI_DSI_4LANE, + EXT_GIC_ID_MIPI_CSI_2LANE, + EXT_GIC_ID_MIPI_DSI_2LANE, + EXT_GIC_ID_ONENAND_AUDI, + EXT_GIC_ID_ROTATOR, + EXT_GIC_ID_FIMC0, + EXT_GIC_ID_FIMC1, + EXT_GIC_ID_FIMC2, + EXT_GIC_ID_FIMC3, + EXT_GIC_ID_JPEG, + EXT_GIC_ID_2D, + EXT_GIC_ID_PCIe, + EXT_GIC_ID_MIXER, + EXT_GIC_ID_HDMI, + EXT_GIC_ID_HDMI_I2C, + EXT_GIC_ID_MFC, + EXT_GIC_ID_TVENC, +}; + +enum ExtInt { + EXT_GIC_ID_EXTINT0 = 48, + EXT_GIC_ID_EXTINT1, + EXT_GIC_ID_EXTINT2, + EXT_GIC_ID_EXTINT3, + EXT_GIC_ID_EXTINT4, + EXT_GIC_ID_EXTINT5, + EXT_GIC_ID_EXTINT6, + EXT_GIC_ID_EXTINT7, + EXT_GIC_ID_EXTINT8, + EXT_GIC_ID_EXTINT9, + EXT_GIC_ID_EXTINT10, + EXT_GIC_ID_EXTINT11, + EXT_GIC_ID_EXTINT12, + EXT_GIC_ID_EXTINT13, + EXT_GIC_ID_EXTINT14, + EXT_GIC_ID_EXTINT15 +}; + +/* + * External GIC sources which are not from External Interrupt Combiner or + * External Interrupts are starting from EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ, + * which is INTG16 in Internal Interrupt Combiner. + */ + +static const uint32_t +combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { + /* int combiner groups 16-19 */ + { }, { }, { }, { }, + /* int combiner group 20 */ + { 0, EXT_GIC_ID_MDMA_LCD0 }, + /* int combiner group 21 */ + { EXT_GIC_ID_PDMA0, EXT_GIC_ID_PDMA1 }, + /* int combiner group 22 */ + { EXT_GIC_ID_TIMER0, EXT_GIC_ID_TIMER1, EXT_GIC_ID_TIMER2, + EXT_GIC_ID_TIMER3, EXT_GIC_ID_TIMER4 }, + /* int combiner group 23 */ + { EXT_GIC_ID_RTC_ALARM, EXT_GIC_ID_RTC_TIC }, + /* int combiner group 24 */ + { EXT_GIC_ID_GPIO_XB, EXT_GIC_ID_GPIO_XA }, + /* int combiner group 25 */ + { EXT_GIC_ID_IEM_APC, EXT_GIC_ID_IEM_IEC }, + /* int combiner group 26 */ + { EXT_GIC_ID_UART0, EXT_GIC_ID_UART1, EXT_GIC_ID_UART2, EXT_GIC_ID_UART3, + EXT_GIC_ID_UART4 }, + /* int combiner group 27 */ + { EXT_GIC_ID_I2C0, EXT_GIC_ID_I2C1, EXT_GIC_ID_I2C2, EXT_GIC_ID_I2C3, + EXT_GIC_ID_I2C4, EXT_GIC_ID_I2C5, EXT_GIC_ID_I2C6, + EXT_GIC_ID_I2C7 }, + /* int combiner group 28 */ + { EXT_GIC_ID_SPI0, EXT_GIC_ID_SPI1, EXT_GIC_ID_SPI2 , EXT_GIC_ID_USB_HOST}, + /* int combiner group 29 */ + { EXT_GIC_ID_HSMMC0, EXT_GIC_ID_HSMMC1, EXT_GIC_ID_HSMMC2, + EXT_GIC_ID_HSMMC3, EXT_GIC_ID_SDMMC }, + /* int combiner group 30 */ + { EXT_GIC_ID_MIPI_CSI_4LANE, EXT_GIC_ID_MIPI_CSI_2LANE }, + /* int combiner group 31 */ + { EXT_GIC_ID_MIPI_DSI_4LANE, EXT_GIC_ID_MIPI_DSI_2LANE }, + /* int combiner group 32 */ + { EXT_GIC_ID_FIMC0, EXT_GIC_ID_FIMC1 }, + /* int combiner group 33 */ + { EXT_GIC_ID_FIMC2, EXT_GIC_ID_FIMC3 }, + /* int combiner group 34 */ + { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, + /* int combiner group 35 */ + { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* int combiner group 36 */ + { EXT_GIC_ID_MIXER }, + /* int combiner group 37 */ + { EXT_GIC_ID_EXTINT4, EXT_GIC_ID_EXTINT5, EXT_GIC_ID_EXTINT6, + EXT_GIC_ID_EXTINT7 }, + /* groups 38-50 */ + { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, + /* int combiner group 51 */ + { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* group 52 */ + { }, + /* int combiner group 53 */ + { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* groups 54-63 */ + { }, { }, { }, { }, { }, { }, { }, { }, { }, { } +}; + +/* + * Initialize board IRQs. + * These IRQs contain splitted Int/External Combiner and External Gic IRQs. + */ +static void exynos4210_init_board_irqs(Exynos4210State *s) +{ + uint32_t grp, bit, irq_id, n; + Exynos4210Irq *is = &s->irqs; + + for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { + irq_id = 0; + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || + n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { + /* MCT_G0 is passed to External GIC */ + irq_id = EXT_GIC_ID_MCT_G0; + } + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || + n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { + /* MCT_G1 is passed to External and GIC */ + irq_id = EXT_GIC_ID_MCT_G1; + } + if (irq_id) { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); + } else { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_combiner_irq[n]); + } + } + for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { + /* these IDs are passed to Internal Combiner and External GIC */ + grp = EXYNOS4210_COMBINER_GET_GRP_NUM(n); + bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); + irq_id = combiner_grp_to_gic_id[grp - + EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; + + if (irq_id) { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); + } + } +} + +/* + * Get IRQ number from exynos4210 IRQ subsystem stub. + * To identify IRQ source use internal combiner group and bit number + * grp - group number + * bit - bit number inside group + */ +uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) +{ + return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); +} + static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/exynos4210.h" #include "qom/object.h" -enum ExtGicId { - EXT_GIC_ID_MDMA_LCD0 = 66, - EXT_GIC_ID_PDMA0, - EXT_GIC_ID_PDMA1, - EXT_GIC_ID_TIMER0, - EXT_GIC_ID_TIMER1, - EXT_GIC_ID_TIMER2, - EXT_GIC_ID_TIMER3, - EXT_GIC_ID_TIMER4, - EXT_GIC_ID_MCT_L0, - EXT_GIC_ID_WDT, - EXT_GIC_ID_RTC_ALARM, - EXT_GIC_ID_RTC_TIC, - EXT_GIC_ID_GPIO_XB, - EXT_GIC_ID_GPIO_XA, - EXT_GIC_ID_MCT_L1, - EXT_GIC_ID_IEM_APC, - EXT_GIC_ID_IEM_IEC, - EXT_GIC_ID_NFC, - EXT_GIC_ID_UART0, - EXT_GIC_ID_UART1, - EXT_GIC_ID_UART2, - EXT_GIC_ID_UART3, - EXT_GIC_ID_UART4, - EXT_GIC_ID_MCT_G0, - EXT_GIC_ID_I2C0, - EXT_GIC_ID_I2C1, - EXT_GIC_ID_I2C2, - EXT_GIC_ID_I2C3, - EXT_GIC_ID_I2C4, - EXT_GIC_ID_I2C5, - EXT_GIC_ID_I2C6, - EXT_GIC_ID_I2C7, - EXT_GIC_ID_SPI0, - EXT_GIC_ID_SPI1, - EXT_GIC_ID_SPI2, - EXT_GIC_ID_MCT_G1, - EXT_GIC_ID_USB_HOST, - EXT_GIC_ID_USB_DEVICE, - EXT_GIC_ID_MODEMIF, - EXT_GIC_ID_HSMMC0, - EXT_GIC_ID_HSMMC1, - EXT_GIC_ID_HSMMC2, - EXT_GIC_ID_HSMMC3, - EXT_GIC_ID_SDMMC, - EXT_GIC_ID_MIPI_CSI_4LANE, - EXT_GIC_ID_MIPI_DSI_4LANE, - EXT_GIC_ID_MIPI_CSI_2LANE, - EXT_GIC_ID_MIPI_DSI_2LANE, - EXT_GIC_ID_ONENAND_AUDI, - EXT_GIC_ID_ROTATOR, - EXT_GIC_ID_FIMC0, - EXT_GIC_ID_FIMC1, - EXT_GIC_ID_FIMC2, - EXT_GIC_ID_FIMC3, - EXT_GIC_ID_JPEG, - EXT_GIC_ID_2D, - EXT_GIC_ID_PCIe, - EXT_GIC_ID_MIXER, - EXT_GIC_ID_HDMI, - EXT_GIC_ID_HDMI_I2C, - EXT_GIC_ID_MFC, - EXT_GIC_ID_TVENC, -}; - -enum ExtInt { - EXT_GIC_ID_EXTINT0 = 48, - EXT_GIC_ID_EXTINT1, - EXT_GIC_ID_EXTINT2, - EXT_GIC_ID_EXTINT3, - EXT_GIC_ID_EXTINT4, - EXT_GIC_ID_EXTINT5, - EXT_GIC_ID_EXTINT6, - EXT_GIC_ID_EXTINT7, - EXT_GIC_ID_EXTINT8, - EXT_GIC_ID_EXTINT9, - EXT_GIC_ID_EXTINT10, - EXT_GIC_ID_EXTINT11, - EXT_GIC_ID_EXTINT12, - EXT_GIC_ID_EXTINT13, - EXT_GIC_ID_EXTINT14, - EXT_GIC_ID_EXTINT15 -}; - -/* - * External GIC sources which are not from External Interrupt Combiner or - * External Interrupts are starting from EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ, - * which is INTG16 in Internal Interrupt Combiner. - */ - -static const uint32_t -combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { - /* int combiner groups 16-19 */ - { }, { }, { }, { }, - /* int combiner group 20 */ - { 0, EXT_GIC_ID_MDMA_LCD0 }, - /* int combiner group 21 */ - { EXT_GIC_ID_PDMA0, EXT_GIC_ID_PDMA1 }, - /* int combiner group 22 */ - { EXT_GIC_ID_TIMER0, EXT_GIC_ID_TIMER1, EXT_GIC_ID_TIMER2, - EXT_GIC_ID_TIMER3, EXT_GIC_ID_TIMER4 }, - /* int combiner group 23 */ - { EXT_GIC_ID_RTC_ALARM, EXT_GIC_ID_RTC_TIC }, - /* int combiner group 24 */ - { EXT_GIC_ID_GPIO_XB, EXT_GIC_ID_GPIO_XA }, - /* int combiner group 25 */ - { EXT_GIC_ID_IEM_APC, EXT_GIC_ID_IEM_IEC }, - /* int combiner group 26 */ - { EXT_GIC_ID_UART0, EXT_GIC_ID_UART1, EXT_GIC_ID_UART2, EXT_GIC_ID_UART3, - EXT_GIC_ID_UART4 }, - /* int combiner group 27 */ - { EXT_GIC_ID_I2C0, EXT_GIC_ID_I2C1, EXT_GIC_ID_I2C2, EXT_GIC_ID_I2C3, - EXT_GIC_ID_I2C4, EXT_GIC_ID_I2C5, EXT_GIC_ID_I2C6, - EXT_GIC_ID_I2C7 }, - /* int combiner group 28 */ - { EXT_GIC_ID_SPI0, EXT_GIC_ID_SPI1, EXT_GIC_ID_SPI2 , EXT_GIC_ID_USB_HOST}, - /* int combiner group 29 */ - { EXT_GIC_ID_HSMMC0, EXT_GIC_ID_HSMMC1, EXT_GIC_ID_HSMMC2, - EXT_GIC_ID_HSMMC3, EXT_GIC_ID_SDMMC }, - /* int combiner group 30 */ - { EXT_GIC_ID_MIPI_CSI_4LANE, EXT_GIC_ID_MIPI_CSI_2LANE }, - /* int combiner group 31 */ - { EXT_GIC_ID_MIPI_DSI_4LANE, EXT_GIC_ID_MIPI_DSI_2LANE }, - /* int combiner group 32 */ - { EXT_GIC_ID_FIMC0, EXT_GIC_ID_FIMC1 }, - /* int combiner group 33 */ - { EXT_GIC_ID_FIMC2, EXT_GIC_ID_FIMC3 }, - /* int combiner group 34 */ - { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, - /* int combiner group 35 */ - { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* int combiner group 36 */ - { EXT_GIC_ID_MIXER }, - /* int combiner group 37 */ - { EXT_GIC_ID_EXTINT4, EXT_GIC_ID_EXTINT5, EXT_GIC_ID_EXTINT6, - EXT_GIC_ID_EXTINT7 }, - /* groups 38-50 */ - { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, - /* int combiner group 51 */ - { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* group 52 */ - { }, - /* int combiner group 53 */ - { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* groups 54-63 */ - { }, { }, { }, { }, { }, { }, { }, { }, { }, { } -}; - #define EXYNOS4210_GIC_NIRQ 160 #define EXYNOS4210_EXT_GIC_CPU_REGION_SIZE 0x10000 @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -/* - * Initialize board IRQs. - * These IRQs contain splitted Int/External Combiner and External Gic IRQs. - */ -void exynos4210_init_board_irqs(Exynos4210State *s) -{ - uint32_t grp, bit, irq_id, n; - Exynos4210Irq *is = &s->irqs; - - for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { - irq_id = 0; - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { - /* MCT_G0 is passed to External GIC */ - irq_id = EXT_GIC_ID_MCT_G0; - } - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { - /* MCT_G1 is passed to External and GIC */ - irq_id = EXT_GIC_ID_MCT_G1; - } - if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); - } else { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_combiner_irq[n]); - } - } - for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { - /* these IDs are passed to Internal Combiner and External GIC */ - grp = EXYNOS4210_COMBINER_GET_GRP_NUM(n); - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - irq_id = combiner_grp_to_gic_id[grp - - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; - - if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); - } - } -} - -/* - * Get IRQ number from exynos4210 IRQ subsystem stub. - * To identify IRQ source use internal combiner group and bit number - * grp - group number - * bit - bit number inside group - */ -uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) -{ - return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); -} - -/********* GIC part *********/ - #define TYPE_EXYNOS4210_GIC "exynos4210.gic" OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) -- 2.25.1 Switch the creation of the external GIC to the new-style "embedded in state struct" approach, so we can easily refer to the object elsewhere during realize. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-9-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 ++ include/hw/intc/exynos4210_gic.h | 43 ++++++++++++++++++++++++++++++++ hw/arm/exynos4210.c | 10 ++++---- hw/intc/exynos4210_gic.c | 17 ++----------- MAINTAINERS | 2 +- 5 files changed, 53 insertions(+), 21 deletions(-) create mode 100644 include/hw/intc/exynos4210_gic.h diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" +#include "hw/intc/exynos4210_gic.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; + Exynos4210GicState ext_gic; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/include/hw/intc/exynos4210_gic.h b/include/hw/intc/exynos4210_gic.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/intc/exynos4210_gic.h @@ -XXX,XX +XXX,XX @@ +/* + * Samsung exynos4210 GIC implementation. Based on hw/arm_gic.c + * + * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. + * All rights reserved. + * + * Evgeny Voevodin <e.voevodin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HW_INTC_EXYNOS4210_GIC_H +#define HW_INTC_EXYNOS4210_GIC_H + +#include "hw/sysbus.h" + +#define TYPE_EXYNOS4210_GIC "exynos4210.gic" +OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) + +#define EXYNOS4210_GIC_NCPUS 2 + +struct Exynos4210GicState { + SysBusDevice parent_obj; + + MemoryRegion cpu_container; + MemoryRegion dist_container; + MemoryRegion cpu_alias[EXYNOS4210_GIC_NCPUS]; + MemoryRegion dist_alias[EXYNOS4210_GIC_NCPUS]; + uint32_t num_cpu; + DeviceState *gic; +}; + +#endif diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL); /* External GIC */ - dev = qdev_new("exynos4210.gic"); - qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->ext_gic), "num-cpu", EXYNOS4210_NCPUS); + busdev = SYS_BUS_DEVICE(&s->ext_gic); + sysbus_realize(busdev, &error_fatal); /* Map CPU interface */ sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR); /* Map Distributer interface */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { - s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n); + s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->ext_gic), n); } /* Internal Interrupt Combiner */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) } object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); + object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); } static void exynos4210_class_init(ObjectClass *klass, void *data) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "hw/irq.h" #include "hw/qdev-properties.h" +#include "hw/intc/exynos4210_gic.h" #include "hw/arm/exynos4210.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -#define TYPE_EXYNOS4210_GIC "exynos4210.gic" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) - -struct Exynos4210GicState { - SysBusDevice parent_obj; - - MemoryRegion cpu_container; - MemoryRegion dist_container; - MemoryRegion cpu_alias[EXYNOS4210_NCPUS]; - MemoryRegion dist_alias[EXYNOS4210_NCPUS]; - uint32_t num_cpu; - DeviceState *gic; -}; - static void exynos4210_gic_set_irq(void *opaque, int irq, int level) { Exynos4210GicState *s = (Exynos4210GicState *)opaque; @@ -XXX,XX +XXX,XX @@ static void exynos4210_gic_realize(DeviceState *dev, Error **errp) * enough room for the cpu numbers. gcc 9.2.1 on 32-bit x86 * doesn't figure this out, otherwise and gives spurious warnings. */ - assert(n <= EXYNOS4210_NCPUS); + assert(n <= EXYNOS4210_GIC_NCPUS); for (i = 0; i < n; i++) { /* Map CPU interface per SMP Core */ sprintf(cpu_alias_name, "%s%x", cpu_prefix, i); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/*/exynos* -F: include/hw/arm/exynos4210.h +F: include/hw/*/exynos* Calxeda Highbank M: Rob Herring <robh@kernel.org> -- 2.25.1 The only time we use the ext_gic_irq[] array in the Exynos4210Irq struct is during realize of the SoC -- we initialize it with the input IRQs of the external GIC device, and then connect those to outputs of other devices further on in realize (including in the exynos4210_init_board_irqs() function). Now that the ext_gic object is easily accessible as s->ext_gic we can make the connections directly from one device to the other without going via this array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-10-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 - hw/arm/exynos4210.c | 12 ++++++------ 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; - qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; } Exynos4210Irq; struct Exynos4210State { diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; Exynos4210Irq *is = &s->irqs; + DeviceState *extgicdev = DEVICE(&s->ext_gic); for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) } if (irq_id) { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); + qdev_get_gpio_in(extgicdev, + irq_id - 32)); } else { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], is->ext_combiner_irq[n]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) if (irq_id) { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); + qdev_get_gpio_in(extgicdev, + irq_id - 32)); } } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } - for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { - s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->ext_gic), n); - } /* Internal Interrupt Combiner */ dev = qdev_new("exynos4210.combiner"); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { - sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]); + sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } exynos4210_combiner_get_gpioin(&s->irqs, dev, 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); -- 2.25.1 The function exynos4210_combiner_get_gpioin() currently lives in exynos4210_combiner.c, but it isn't really part of the combiner device itself -- it is a function that implements the wiring up of some interrupt sources to multiple combiner inputs. Move it to live with the other SoC-level code in exynos4210.c, along with a few macros previously defined in exynos4210.h which are now used only in exynos4210.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-11-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 11 ----- hw/arm/exynos4210.c | 82 +++++++++++++++++++++++++++++++++++ hw/intc/exynos4210_combiner.c | 77 -------------------------------- 3 files changed, 82 insertions(+), 88 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \ (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8) -#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp)*8 + (bit)) -#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) -#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ - ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) - /* IRQs number for external and internal GIC */ #define EXYNOS4210_EXT_GIC_NIRQ (160-32) #define EXYNOS4210_INT_GIC_NIRQ 64 @@ -XXX,XX +XXX,XX @@ void exynos4210_write_secondary(ARMCPU *cpu, * bit - bit number inside group */ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit); -/* - * Get Combiner input GPIO into irqs structure - */ -void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, - int ext); - /* * exynos4210 UART */ diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { { }, { }, { }, { }, { }, { }, { }, { }, { }, { } }; +#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp) * 8 + (bit)) +#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) +#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ + ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) + /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. @@ -XXX,XX +XXX,XX @@ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); } +/* + * Get Combiner input GPIO into irqs structure + */ +static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, + DeviceState *dev, int ext) +{ + int n; + int bit; + int max; + qemu_irq *irq; + + max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : + EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; + irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; + + /* + * Some IRQs of Int/External Combiner are going to two Combiners groups, + * so let split them. + */ + for (n = 0; n < max; n++) { + + bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); + + switch (n) { + /* MDNIE_LCD1 INTG1 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); + continue; + + /* TMU INTG3 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); + continue; + + /* LCD1 INTG12 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); + continue; + + /* Multi-Core Timer INTG12 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG35 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG51 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG53 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + } + + irq[n] = qdev_get_gpio_in(dev, n); + } +} + static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; diff --git a/hw/intc/exynos4210_combiner.c b/hw/intc/exynos4210_combiner.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_combiner.c +++ b/hw/intc/exynos4210_combiner.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_exynos4210_combiner = { } }; -/* - * Get Combiner input GPIO into irqs structure - */ -void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, - int ext) -{ - int n; - int bit; - int max; - qemu_irq *irq; - - max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; - irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - - /* - * Some IRQs of Int/External Combiner are going to two Combiners groups, - * so let split them. - */ - for (n = 0; n < max; n++) { - - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - - switch (n) { - /* MDNIE_LCD1 INTG1 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); - continue; - - /* TMU INTG3 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); - continue; - - /* LCD1 INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); - continue; - - /* Multi-Core Timer INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG35 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG51 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG53 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - } - - irq[n] = qdev_get_gpio_in(dev, n); - } -} - static uint64_t exynos4210_combiner_read(void *opaque, hwaddr offset, unsigned size) { -- 2.25.1 Delete a couple of #defines which are never used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-12-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \ (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8) -/* IRQs number for external and internal GIC */ -#define EXYNOS4210_EXT_GIC_NIRQ (160-32) -#define EXYNOS4210_INT_GIC_NIRQ 64 - #define EXYNOS4210_I2C_NUMBER 9 #define EXYNOS4210_NUM_DMA 3 -- 2.25.1 In exynos4210_init_board_irqs(), use the TYPE_SPLIT_IRQ device instead of qemu_irq_split(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-13-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 9 ++++++++ hw/arm/exynos4210.c | 41 +++++++++++++++++++++++++++++-------- 2 files changed, 42 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" #include "hw/intc/exynos4210_gic.h" +#include "hw/core/split-irq.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_NUM_DMA 3 +/* + * We need one splitter for every external combiner input, plus + * one for every non-zero entry in combiner_grp_to_gic_id[]. + * We'll assert in exynos4210_init_board_irqs() if this is wrong. + */ +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 60) + typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; Exynos4210GicState ext_gic; + SplitIRQ splitter[EXYNOS4210_NUM_SPLITTERS]; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) uint32_t grp, bit, irq_id, n; Exynos4210Irq *is = &s->irqs; DeviceState *extgicdev = DEVICE(&s->ext_gic); + int splitcount = 0; + DeviceState *splitter; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) /* MCT_G1 is passed to External and GIC */ irq_id = EXT_GIC_ID_MCT_G1; } + + assert(splitcount < EXYNOS4210_NUM_SPLITTERS); + splitter = DEVICE(&s->splitter[splitcount]); + qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_realize(splitter, NULL, &error_abort); + splitcount++; + s->irq_table[n] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - qdev_get_gpio_in(extgicdev, - irq_id - 32)); + qdev_connect_gpio_out(splitter, 1, + qdev_get_gpio_in(extgicdev, irq_id - 32)); } else { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - qdev_get_gpio_in(extgicdev, - irq_id - 32)); + assert(splitcount < EXYNOS4210_NUM_SPLITTERS); + splitter = DEVICE(&s->splitter[splitcount]); + qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_realize(splitter, NULL, &error_abort); + splitcount++; + s->irq_table[n] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, + qdev_get_gpio_in(extgicdev, irq_id - 32)); } } + /* + * We check this here to avoid a more obscure assert later when + * qdev_assert_realized_properly() checks that we realized every + * child object we initialized. + */ + assert(splitcount == EXYNOS4210_NUM_SPLITTERS); } /* @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); } + for (i = 0; i < ARRAY_SIZE(s->splitter); i++) { + g_autofree char *name = g_strdup_printf("irq-splitter%d", i); + object_initialize_child(obj, name, &s->splitter[i], TYPE_SPLIT_IRQ); + } + object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); } -- 2.25.1 In exynos4210_init_board_irqs(), the loop that handles IRQ lines that are in a range that applies to the internal combiner only creates a splitter for those interrupts which go to both the internal combiner and to the external GIC, but it does nothing at all for the interrupts which don't go to the external GIC, leaving the irq_table[] array element empty for those. (This will result in those interrupts simply being lost, not in a QEMU crash.) I don't have a reliable datasheet for this SoC, but since we do wire up one interrupt line in this category (the HDMI I2C device on interrupt 16,1), this seems like it must be a bug in the existing QEMU code. Fill in the irq_table[] entries where we're not splitting the IRQ to both the internal combiner and the external GIC with the IRQ line of the internal combiner. (That is, these IRQ lines go to just one device, not multiple.) This bug didn't have any visible guest effects because the only implemented device that was affected was the HDMI I2C controller, and we never connect any I2C devices to that bus. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-14-peter.maydell@linaro.org --- hw/arm/exynos4210.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); qdev_connect_gpio_out(splitter, 1, qdev_get_gpio_in(extgicdev, irq_id - 32)); + } else { + s->irq_table[n] = is->int_combiner_irq[n]; } } /* -- 2.25.1 Currently for the interrupts MCT_G0 and MCT_G1 which are the only ones in the input range of the external combiner and which are also wired to the external GIC, we connect them only to the internal combiner and the external GIC. This seems likely to be a bug, as all other interrupts which are in the input range of both combiners are connected to both combiners. (The fact that the code in exynos4210_combiner_get_gpioin() is also trying to wire up these inputs on both combiners also suggests this.) Wire these interrupts up to both combiners, like the rest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-15-peter.maydell@linaro.org --- hw/arm/exynos4210.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); - qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_prop_set_uint16(splitter, "num-lines", irq_id ? 3 : 2); qdev_realize(splitter, NULL, &error_abort); splitcount++; s->irq_table[n] = qdev_get_gpio_in(splitter, 0); qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); if (irq_id) { - qdev_connect_gpio_out(splitter, 1, + qdev_connect_gpio_out(splitter, 2, qdev_get_gpio_in(extgicdev, irq_id - 32)); - } else { - qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { -- 2.25.1 The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0 and EXT_GIC_ID_MCT_G1 multiple times. This means that we will connect multiple IRQs up to the same external GIC input, which is not permitted. We do the same thing in the code in exynos4210_init_board_irqs() because the conditionals selecting an irq_id in the first loop match multiple interrupt IDs. Overall we do this for interrupt IDs (1, 4), (12, 4), (35, 4), (51, 4), (53, 4) for EXT_GIC_ID_MCT_G0 and (1, 5), (12, 5), (35, 5), (51, 5), (53, 5) for EXT_GIC_ID_MCT_G1 These correspond to the cases for the multi-core timer that we are wiring up to multiple inputs on the combiner in exynos4210_combiner_get_gpioin(). That code already deals with all these interrupt IDs being the same input source, so we don't need to connect the external GIC interrupt for any of them except the first (1, 4) and (1, 5). Remove the array entries and conditionals which were incorrectly causing us to wire up extra lines. This bug didn't cause any visible effects, because we only connect up a device to the "primary" ID values (1, 4) and (1, 5), so the extra lines would never be set to a level. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-16-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 +- hw/arm/exynos4210.c | 12 +++++------- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ * one for every non-zero entry in combiner_grp_to_gic_id[]. * We'll assert in exynos4210_init_board_irqs() if this is wrong. */ -#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 60) +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 54) typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* int combiner group 34 */ { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, /* int combiner group 35 */ - { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { 0, 0, 0, EXT_GIC_ID_MCT_L1 }, /* int combiner group 36 */ { EXT_GIC_ID_MIXER }, /* int combiner group 37 */ @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* groups 38-50 */ { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, /* int combiner group 51 */ - { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { EXT_GIC_ID_MCT_L0 }, /* group 52 */ { }, /* int combiner group 53 */ - { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { EXT_GIC_ID_WDT }, /* groups 54-63 */ { }, { }, { }, { }, { }, { }, { }, { }, { }, { } }; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4)) { /* MCT_G0 is passed to External GIC */ irq_id = EXT_GIC_ID_MCT_G0; } - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5)) { /* MCT_G1 is passed to External and GIC */ irq_id = EXT_GIC_ID_MCT_G1; } -- 2.25.1 At this point, the function exynos4210_init_board_irqs() splits input IRQ lines to connect them to the input combiner, output combiner and external GIC. The function exynos4210_combiner_get_gpioin() splits some of the combiner input lines further to connect them to multiple different inputs on the combiner. Because (unlike qemu_irq_split()) the TYPE_SPLIT_IRQ device has a configurable number of outputs, we can do all this in one place, by making exynos4210_init_board_irqs() add extra outputs to the splitter device when it must be connected to more than one input on each combiner. We do this with a new data structure, the combinermap, which is an array each of whose elements is a list of the interrupt IDs on the combiner which must be tied together. As we loop through each interrupt ID, if we find that it is the first one in one of these lists, we configure the splitter device with eonugh extra outputs and wire them up to the other interrupt IDs in the list. Conveniently, for all the cases where this is necessary, the lowest-numbered interrupt ID in each group is in the range of the external combiner, so we only need to code for this in the first of the two loops in exynos4210_init_board_irqs(). The old code in exynos4210_combiner_get_gpioin() which is being deleted here had several problems which don't exist in the new code in its handling of the multi-core timer interrupts: (1) the case labels specified bits 4 ... 8, but bit '8' doesn't exist; these should have been 4 ... 7 (2) it used the input irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)] multiple times as the input of several different splitters, which isn't allowed (3) in an apparent cut-and-paste error, the cases for all the multi-core timer inputs used "bit + 4" even though the bit range for the case was (intended to be) 4 ... 7, which meant it was looking at non-existent bits 8 ... 11. None of these exist in the new code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-17-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 6 +- hw/arm/exynos4210.c | 178 +++++++++++++++++++++++------------- 2 files changed, 119 insertions(+), 65 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ /* * We need one splitter for every external combiner input, plus - * one for every non-zero entry in combiner_grp_to_gic_id[]. + * one for every non-zero entry in combiner_grp_to_gic_id[], + * minus one for every external combiner ID in second or later + * places in a combinermap[] line. * We'll assert in exynos4210_init_board_irqs() if this is wrong. */ -#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 54) +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 38) typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) +/* + * Some interrupt lines go to multiple combiner inputs. + * This data structure defines those: each array element is + * a list of combiner inputs which are connected together; + * the one with the smallest interrupt ID value must be first. + * As with combiner_grp_to_gic_id[], we rely on (0, 0) not being + * wired to anything so we can use 0 as a terminator. + */ +#define IRQNO(G, B) EXYNOS4210_COMBINER_GET_IRQ_NUM(G, B) +#define IRQNONE 0 + +#define COMBINERMAP_SIZE 16 + +static const int combinermap[COMBINERMAP_SIZE][6] = { + /* MDNIE_LCD1 */ + { IRQNO(0, 4), IRQNO(1, 0), IRQNONE }, + { IRQNO(0, 5), IRQNO(1, 1), IRQNONE }, + { IRQNO(0, 6), IRQNO(1, 2), IRQNONE }, + { IRQNO(0, 7), IRQNO(1, 3), IRQNONE }, + /* TMU */ + { IRQNO(2, 4), IRQNO(3, 4), IRQNONE }, + { IRQNO(2, 5), IRQNO(3, 5), IRQNONE }, + { IRQNO(2, 6), IRQNO(3, 6), IRQNONE }, + { IRQNO(2, 7), IRQNO(3, 7), IRQNONE }, + /* LCD1 */ + { IRQNO(11, 4), IRQNO(12, 0), IRQNONE }, + { IRQNO(11, 5), IRQNO(12, 1), IRQNONE }, + { IRQNO(11, 6), IRQNO(12, 2), IRQNONE }, + { IRQNO(11, 7), IRQNO(12, 3), IRQNONE }, + /* Multi-core timer */ + { IRQNO(1, 4), IRQNO(12, 4), IRQNO(35, 4), IRQNO(51, 4), IRQNO(53, 4), IRQNONE }, + { IRQNO(1, 5), IRQNO(12, 5), IRQNO(35, 5), IRQNO(51, 5), IRQNO(53, 5), IRQNONE }, + { IRQNO(1, 6), IRQNO(12, 6), IRQNO(35, 6), IRQNO(51, 6), IRQNO(53, 6), IRQNONE }, + { IRQNO(1, 7), IRQNO(12, 7), IRQNO(35, 7), IRQNO(51, 7), IRQNO(53, 7), IRQNONE }, +}; + +#undef IRQNO + +static const int *combinermap_entry(int irq) +{ + /* + * If the interrupt number passed in is the first entry in some + * line of the combinermap, return a pointer to that line; + * otherwise return NULL. + */ + int i; + for (i = 0; i < COMBINERMAP_SIZE; i++) { + if (combinermap[i][0] == irq) { + return combinermap[i]; + } + } + return NULL; +} + +static int mapline_size(const int *mapline) +{ + /* Return number of entries in this mapline in total */ + int i = 0; + + if (!mapline) { + /* Not in the map? IRQ goes to exactly one combiner input */ + return 1; + } + while (*mapline != IRQNONE) { + mapline++; + i++; + } + return i; +} + /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) DeviceState *extgicdev = DEVICE(&s->ext_gic); int splitcount = 0; DeviceState *splitter; + const int *mapline; + int numlines, splitin, in; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) irq_id = EXT_GIC_ID_MCT_G1; } + if (s->irq_table[n]) { + /* + * This must be some non-first entry in a combinermap line, + * and we've already filled it in. + */ + continue; + } + mapline = combinermap_entry(n); + /* + * We need to connect the IRQ to multiple inputs on both combiners + * and possibly also to the external GIC. + */ + numlines = 2 * mapline_size(mapline); + if (irq_id) { + numlines++; + } assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); - qdev_prop_set_uint16(splitter, "num-lines", irq_id ? 3 : 2); + qdev_prop_set_uint16(splitter, "num-lines", numlines); qdev_realize(splitter, NULL, &error_abort); splitcount++; - s->irq_table[n] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); - qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); + + in = n; + splitin = 0; + for (;;) { + s->irq_table[in] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, splitin, is->int_combiner_irq[in]); + qdev_connect_gpio_out(splitter, splitin + 1, is->ext_combiner_irq[in]); + splitin += 2; + if (!mapline) { + break; + } + mapline++; + in = *mapline; + if (in == IRQNONE) { + break; + } + } if (irq_id) { - qdev_connect_gpio_out(splitter, 2, + qdev_connect_gpio_out(splitter, splitin, qdev_get_gpio_in(extgicdev, irq_id - 32)); } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) irq_id = combiner_grp_to_gic_id[grp - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; + if (s->irq_table[n]) { + /* + * This must be some non-first entry in a combinermap line, + * and we've already filled it in. + */ + continue; + } + if (irq_id) { assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, int ext) { int n; - int bit; int max; qemu_irq *irq; @@ -XXX,XX +XXX,XX @@ static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - /* - * Some IRQs of Int/External Combiner are going to two Combiners groups, - * so let split them. - */ for (n = 0; n < max; n++) { - - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - - switch (n) { - /* MDNIE_LCD1 INTG1 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); - continue; - - /* TMU INTG3 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); - continue; - - /* LCD1 INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); - continue; - - /* Multi-Core Timer INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG35 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG51 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG53 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - } - irq[n] = qdev_get_gpio_in(dev, n); } } -- 2.25.1 Switch the creation of the combiner devices to the new-style "embedded in state struct" approach, so we can easily refer to the object elsewhere during realize. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-18-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 3 ++ include/hw/intc/exynos4210_combiner.h | 57 +++++++++++++++++++++++++++ hw/arm/exynos4210.c | 20 +++++----- hw/intc/exynos4210_combiner.c | 31 +-------------- 4 files changed, 72 insertions(+), 39 deletions(-) create mode 100644 include/hw/intc/exynos4210_combiner.h diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" #include "hw/intc/exynos4210_gic.h" +#include "hw/intc/exynos4210_combiner.h" #include "hw/core/split-irq.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; Exynos4210GicState ext_gic; + Exynos4210CombinerState int_combiner; + Exynos4210CombinerState ext_combiner; SplitIRQ splitter[EXYNOS4210_NUM_SPLITTERS]; }; diff --git a/include/hw/intc/exynos4210_combiner.h b/include/hw/intc/exynos4210_combiner.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/intc/exynos4210_combiner.h @@ -XXX,XX +XXX,XX @@ +/* + * Samsung exynos4210 Interrupt Combiner + * + * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. + * All rights reserved. + * + * Evgeny Voevodin <e.voevodin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_INTC_EXYNOS4210_COMBINER +#define HW_INTC_EXYNOS4210_COMBINER + +#include "hw/sysbus.h" + +/* + * State for each output signal of internal combiner + */ +typedef struct CombinerGroupState { + uint8_t src_mask; /* 1 - source enabled, 0 - disabled */ + uint8_t src_pending; /* Pending source interrupts before masking */ +} CombinerGroupState; + +#define TYPE_EXYNOS4210_COMBINER "exynos4210.combiner" +OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210CombinerState, EXYNOS4210_COMBINER) + +/* Number of groups and total number of interrupts for the internal combiner */ +#define IIC_NGRP 64 +#define IIC_NIRQ (IIC_NGRP * 8) +#define IIC_REGSET_SIZE 0x41 + +struct Exynos4210CombinerState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + struct CombinerGroupState group[IIC_NGRP]; + uint32_t reg_set[IIC_REGSET_SIZE]; + uint32_t icipsr[2]; + uint32_t external; /* 1 means that this combiner is external */ + + qemu_irq output_irq[IIC_NGRP]; +}; + +#endif diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) } /* Internal Interrupt Combiner */ - dev = qdev_new("exynos4210.combiner"); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + busdev = SYS_BUS_DEVICE(&s->int_combiner); + sysbus_realize(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, dev, 0); + exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->int_combiner), 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); /* External Interrupt Combiner */ - dev = qdev_new("exynos4210.combiner"); - qdev_prop_set_uint32(dev, "external", 1); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->ext_combiner), "external", 1); + busdev = SYS_BUS_DEVICE(&s->ext_combiner); + sysbus_realize(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, dev, 1); + exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->ext_combiner), 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); + object_initialize_child(obj, "int-combiner", &s->int_combiner, + TYPE_EXYNOS4210_COMBINER); + object_initialize_child(obj, "ext-combiner", &s->ext_combiner, + TYPE_EXYNOS4210_COMBINER); } static void exynos4210_class_init(ObjectClass *klass, void *data) diff --git a/hw/intc/exynos4210_combiner.c b/hw/intc/exynos4210_combiner.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_combiner.c +++ b/hw/intc/exynos4210_combiner.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/module.h" - +#include "hw/intc/exynos4210_combiner.h" #include "hw/arm/exynos4210.h" #include "hw/hw.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ #define DPRINTF(fmt, ...) do {} while (0) #endif -#define IIC_NGRP 64 /* Internal Interrupt Combiner - Groups number */ -#define IIC_NIRQ (IIC_NGRP * 8)/* Internal Interrupt Combiner - Interrupts number */ #define IIC_REGION_SIZE 0x108 /* Size of memory mapped region */ -#define IIC_REGSET_SIZE 0x41 - -/* - * State for each output signal of internal combiner - */ -typedef struct CombinerGroupState { - uint8_t src_mask; /* 1 - source enabled, 0 - disabled */ - uint8_t src_pending; /* Pending source interrupts before masking */ -} CombinerGroupState; - -#define TYPE_EXYNOS4210_COMBINER "exynos4210.combiner" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210CombinerState, EXYNOS4210_COMBINER) - -struct Exynos4210CombinerState { - SysBusDevice parent_obj; - - MemoryRegion iomem; - - struct CombinerGroupState group[IIC_NGRP]; - uint32_t reg_set[IIC_REGSET_SIZE]; - uint32_t icipsr[2]; - uint32_t external; /* 1 means that this combiner is external */ - - qemu_irq output_irq[IIC_NGRP]; -}; static const VMStateDescription vmstate_exynos4210_combiner_group_state = { .name = "exynos4210.combiner.groupstate", -- 2.25.1 The only time we use the int_combiner_irq[] and ext_combiner_irq[] arrays in the Exynos4210Irq struct is during realize of the SoC -- we initialize them with the input IRQs of the combiner devices, and then connect those to outputs of other devices in exynos4210_init_board_irqs(). Now that the combiner objects are easily accessible as s->int_combiner and s->ext_combiner we can make the connections directly from one device to the other without going via these arrays. Since these are the only two remaining elements of Exynos4210Irq, we can remove that struct entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-19-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 6 ------ hw/arm/exynos4210.c | 34 ++++++++-------------------------- 2 files changed, 8 insertions(+), 32 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ */ #define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 38) -typedef struct Exynos4210Irq { - qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; - qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; -} Exynos4210Irq; - struct Exynos4210State { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ ARMCPU *cpu[EXYNOS4210_NCPUS]; - Exynos4210Irq irqs; qemu_irq irq_table[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; MemoryRegion chipid_mem; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static int mapline_size(const int *mapline) static void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; - Exynos4210Irq *is = &s->irqs; DeviceState *extgicdev = DEVICE(&s->ext_gic); + DeviceState *intcdev = DEVICE(&s->int_combiner); + DeviceState *extcdev = DEVICE(&s->ext_combiner); int splitcount = 0; DeviceState *splitter; const int *mapline; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) splitin = 0; for (;;) { s->irq_table[in] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, splitin, is->int_combiner_irq[in]); - qdev_connect_gpio_out(splitter, splitin + 1, is->ext_combiner_irq[in]); + qdev_connect_gpio_out(splitter, splitin, + qdev_get_gpio_in(intcdev, in)); + qdev_connect_gpio_out(splitter, splitin + 1, + qdev_get_gpio_in(extcdev, in)); splitin += 2; if (!mapline) { break; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) qdev_realize(splitter, NULL, &error_abort); splitcount++; s->irq_table[n] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 0, qdev_get_gpio_in(intcdev, n)); qdev_connect_gpio_out(splitter, 1, qdev_get_gpio_in(extgicdev, irq_id - 32)); } else { - s->irq_table[n] = is->int_combiner_irq[n]; + s->irq_table[n] = qdev_get_gpio_in(intcdev, n); } } /* @@ -XXX,XX +XXX,XX @@ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); } -/* - * Get Combiner input GPIO into irqs structure - */ -static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, - DeviceState *dev, int ext) -{ - int n; - int max; - qemu_irq *irq; - - max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; - irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - - for (n = 0; n < max; n++) { - irq[n] = qdev_get_gpio_in(dev, n); - } -} - static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->int_combiner), 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); /* External Interrupt Combiner */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->ext_combiner), 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-2-zongyuan.li@smartx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/realview.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/boot.h" #include "hw/arm/primecell.h" +#include "hw/core/split-irq.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" +#include "hw/qdev-core.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ static const int realview_board_id[] = { 0x76d }; +static void split_irq_from_named(DeviceState *src, const char* outname, + qemu_irq out1, qemu_irq out2) { + DeviceState *splitter = qdev_new(TYPE_SPLIT_IRQ); + + qdev_prop_set_uint32(splitter, "num-lines", 2); + + qdev_realize_and_unref(splitter, NULL, &error_fatal); + + qdev_connect_gpio_out(splitter, 0, out1); + qdev_connect_gpio_out(splitter, 1, out2); + qdev_connect_gpio_out_named(src, outname, 0, + qdev_get_gpio_in(splitter, 0)); +} + static void realview_init(MachineState *machine, enum realview_board_type board_type) { @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, DeviceState *dev, *sysctl, *gpio2, *pl041; SysBusDevice *busdev; qemu_irq pic[64]; - qemu_irq mmc_irq[2]; PCIBus *pci_bus = NULL; NICInfo *nd; DriveInfo *dinfo; @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, * and the PL061 has them the other way about. Also the card * detect line is inverted. */ - mmc_irq[0] = qemu_irq_split( - qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), - qdev_get_gpio_in(gpio2, 1)); - mmc_irq[1] = qemu_irq_split( - qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), - qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); - qdev_connect_gpio_out_named(dev, "card-read-only", 0, mmc_irq[0]); - qdev_connect_gpio_out_named(dev, "card-inserted", 0, mmc_irq[1]); + split_irq_from_named(dev, "card-read-only", + qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), + qdev_get_gpio_in(gpio2, 1)); + + split_irq_from_named(dev, "card-inserted", + qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), + qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); + dinfo = drive_get(IF_SD, 0, 0); if (dinfo) { DeviceState *card; -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-3-zongyuan.li@smartx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" +#include "hw/core/split-irq.h" #include "hw/sysbus.h" #include "hw/sd/sd.h" #include "hw/ssi/ssi.h" @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *ssddev; DriveInfo *dinfo; DeviceState *carddev; + DeviceState *gpio_d_splitter; BlockBackend *blk; /* @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) &error_fatal); ssddev = ssi_create_peripheral(bus, "ssd0323"); - gpio_out[GPIO_D][0] = qemu_irq_split( - qdev_get_gpio_in_named(sddev, SSI_GPIO_CS, 0), + + gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ); + qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2); + qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal); + qdev_connect_gpio_out( + gpio_d_splitter, 0, + qdev_get_gpio_in_named(sddev, SSI_GPIO_CS, 0)); + qdev_connect_gpio_out( + gpio_d_splitter, 1, qdev_get_gpio_in_named(ssddev, SSI_GPIO_CS, 0)); + gpio_out[GPIO_D][0] = qdev_get_gpio_in(gpio_d_splitter, 0); + gpio_out[GPIO_C][7] = qdev_get_gpio_in(ssddev, 0); /* Make sure the select pin is high. */ -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-5-zongyuan.li@smartx.com Resolves: https://gitlab.com/qemu-project/qemu/-/issues/811 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/irq.h | 5 ----- hw/core/irq.c | 15 --------------- 2 files changed, 20 deletions(-) diff --git a/include/hw/irq.h b/include/hw/irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -XXX,XX +XXX,XX @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs. - * It's probably better to use the TYPE_SPLIT_IRQ device instead. - */ -qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); - /* For internal use in qtest. Similar to qemu_irq_split, but operating on an existing vector of qemu_irq. */ void qemu_irq_intercept_in(qemu_irq *gpio_in, qemu_irq_handler handler, int n); diff --git a/hw/core/irq.c b/hw/core/irq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/irq.c +++ b/hw/core/irq.c @@ -XXX,XX +XXX,XX @@ qemu_irq qemu_irq_invert(qemu_irq irq) return qemu_allocate_irq(qemu_notirq, irq, 0); } -static void qemu_splitirq(void *opaque, int line, int level) -{ - struct IRQState **irq = opaque; - irq[0]->handler(irq[0]->opaque, irq[0]->n, level); - irq[1]->handler(irq[1]->opaque, irq[1]->n, level); -} - -qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2) -{ - qemu_irq *s = g_new0(qemu_irq, 2); - s[0] = irq1; - s[1] = irq2; - return qemu_allocate_irq(qemu_splitirq, s, 0); -} - void qemu_irq_intercept_in(qemu_irq *gpio_in, qemu_irq_handler handler, int n) { int i; -- 2.25.1 From: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Describe that the gic-version influences the maximum number of CPUs. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Message-id: 20220413231456.35811-1-heinrich.schuchardt@canonical.com [PMM: minor punctuation tweaks] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ gic-version Valid values are: ``2`` - GICv2 + GICv2. Note that this limits the number of CPUs to 8. ``3`` - GICv3 + GICv3. This allows up to 512 CPUs. ``host`` Use the same GIC version the host provides, when using KVM ``max`` -- 2.25.1 From: Hao Wu <wuhaotsh@google.com> Similar to the Aspeed code in include/misc/aspeed_scu.h, we define the PWRON STRAP fields in their corresponding module for NPCM7XX. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20220411165842.3912945-2-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm7xx_gcr.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "hw/sysbus.h" +/* + * NPCM7XX PWRON STRAP bit fields + * 12: SPI0 powered by VSBV3 at 1.8V + * 11: System flash attached to BMC + * 10: BSP alternative pins. + * 9:8: Flash UART command route enabled. + * 7: Security enabled. + * 6: HI-Z state control. + * 5: ECC disabled. + * 4: Reserved + * 3: JTAG2 enabled. + * 2:0: CPU and DRAM clock frequency. + */ +#define NPCM7XX_PWRON_STRAP_SPI0F18 BIT(12) +#define NPCM7XX_PWRON_STRAP_SFAB BIT(11) +#define NPCM7XX_PWRON_STRAP_BSPA BIT(10) +#define NPCM7XX_PWRON_STRAP_FUP(x) ((x) << 8) +#define FUP_NORM_UART2 3 +#define FUP_PROG_UART3 2 +#define FUP_PROG_UART2 1 +#define FUP_NORM_UART3 0 +#define NPCM7XX_PWRON_STRAP_SECEN BIT(7) +#define NPCM7XX_PWRON_STRAP_HIZ BIT(6) +#define NPCM7XX_PWRON_STRAP_ECC BIT(5) +#define NPCM7XX_PWRON_STRAP_RESERVE1 BIT(4) +#define NPCM7XX_PWRON_STRAP_J2EN BIT(3) +#define NPCM7XX_PWRON_STRAP_CKFRQ(x) (x) +#define CKFRQ_SKIPINIT 0x000 +#define CKFRQ_DEFAULT 0x111 + /* * Number of registers in our device state structure. Don't change this without * incrementing the version_id in the vmstate. -- 2.25.1 From: Hao Wu <wuhaotsh@google.com> This patch uses the defined fields to describe PWRON STRAPs for better readability. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20220411165842.3912945-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/npcm7xx_boards.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "sysemu/block-backend.h" -#define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7 -#define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff -#define QUANTA_GBS_POWER_ON_STRAPS 0x000017ff -#define KUDO_BMC_POWER_ON_STRAPS 0x00001fff -#define MORI_BMC_POWER_ON_STRAPS 0x00001fff +#define NPCM7XX_POWER_ON_STRAPS_DEFAULT ( \ + NPCM7XX_PWRON_STRAP_SPI0F18 | \ + NPCM7XX_PWRON_STRAP_SFAB | \ + NPCM7XX_PWRON_STRAP_BSPA | \ + NPCM7XX_PWRON_STRAP_FUP(FUP_NORM_UART2) | \ + NPCM7XX_PWRON_STRAP_SECEN | \ + NPCM7XX_PWRON_STRAP_HIZ | \ + NPCM7XX_PWRON_STRAP_ECC | \ + NPCM7XX_PWRON_STRAP_RESERVE1 | \ + NPCM7XX_PWRON_STRAP_J2EN | \ + NPCM7XX_PWRON_STRAP_CKFRQ(CKFRQ_DEFAULT)) + +#define NPCM750_EVB_POWER_ON_STRAPS ( \ + NPCM7XX_POWER_ON_STRAPS_DEFAULT & ~NPCM7XX_PWRON_STRAP_J2EN) +#define QUANTA_GSJ_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT +#define QUANTA_GBS_POWER_ON_STRAPS ( \ + NPCM7XX_POWER_ON_STRAPS_DEFAULT & ~NPCM7XX_PWRON_STRAP_SFAB) +#define KUDO_BMC_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT +#define MORI_BMC_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT static const char npcm7xx_default_bootrom[] = "npcm7xx_bootrom.bin"; -- 2.25.1