target-arm queue. The big thing here is the landing of the 3-phase reset patches... -- PMM The following changes since commit 204aa60b37c23a89e690d418f49787d274303ca7: Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-jan-29-2020' into staging (2020-01-30 14:18:45 +0000) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20200130 for you to fetch changes up to dea101a1ae9968c9fec6ab0291489dad7c49f36f: target/arm/cpu: Add the kvm-no-adjvtime CPU property (2020-01-30 16:02:06 +0000) ---------------------------------------------------------------- target-arm queue: * hw/core/or-irq: Fix incorrect assert forbidding num-lines == MAX_OR_LINES * target/arm/arm-semi: Don't let the guest close stdin/stdout/stderr * aspeed: some minor bugfixes * aspeed: add eMMC controller model for AST2600 SoC * hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus' * New 3-phase reset API for device models * hw/intc/arm_gicv3_kvm: Stop wrongly programming GICR_PENDBASER.PTZ bit * Arm KVM: stop/restart the guest counter when the VM is stopped and started ---------------------------------------------------------------- Andrew Jeffery (2): hw/sd: Configure number of slots exposed by the ASPEED SDHCI model hw/arm: ast2600: Wire up the eMMC controller Andrew Jones (6): target/arm/kvm: trivial: Clean up header documentation hw/arm/virt: Add missing 5.0 options call to 4.2 options target/arm/kvm64: kvm64 cpus have timer registers tests/arm-cpu-features: Check feature default values target/arm/kvm: Implement virtual time adjustment target/arm/cpu: Add the kvm-no-adjvtime CPU property Cédric Le Goater (2): ftgmac100: check RX and TX buffer alignment hw/arm/aspeed: add a 'execute-in-place' property to boot directly from CE0 Damien Hedde (11): add device_legacy_reset function to prepare for reset api change hw/core/qdev: add trace events to help with resettable transition hw/core: create Resettable QOM interface hw/core: add Resettable support to BusClass and DeviceClass hw/core/resettable: add support for changing parent hw/core/qdev: handle parent bus change regarding resettable hw/core/qdev: update hotplug reset regarding resettable hw/core: deprecate old reset functions and introduce new ones docs/devel/reset.rst: add doc about Resettable interface vl: replace deprecated qbus_reset_all registration hw/s390x/ipl: replace deprecated qdev_reset_all registration Joel Stanley (1): misc/pca9552: Add qom set and get Peter Maydell (2): hw/core/or-irq: Fix incorrect assert forbidding num-lines == MAX_OR_LINES target/arm/arm-semi: Don't let the guest close stdin/stdout/stderr Philippe Mathieu-Daudé (1): hw/arm/raspi: Remove obsolete use of -smp to set the soc 'enabled-cpus' Zenghui Yu (1): hw/intc/arm_gicv3_kvm: Stop wrongly programming GICR_PENDBASER.PTZ bit hw/core/Makefile.objs | 1 + tests/Makefile.include | 1 + include/hw/arm/aspeed.h | 2 + include/hw/arm/aspeed_soc.h | 2 + include/hw/arm/virt.h | 1 + include/hw/qdev-core.h | 58 +++++++- include/hw/resettable.h | 247 +++++++++++++++++++++++++++++++++ include/hw/sd/aspeed_sdhci.h | 1 + target/arm/cpu.h | 7 + target/arm/kvm_arm.h | 95 ++++++++++--- hw/arm/aspeed.c | 72 ++++++++-- hw/arm/aspeed_ast2600.c | 31 ++++- hw/arm/aspeed_soc.c | 2 + hw/arm/raspi.c | 2 - hw/arm/virt.c | 9 ++ hw/audio/intel-hda.c | 2 +- hw/core/bus.c | 102 ++++++++++++++ hw/core/or-irq.c | 2 +- hw/core/qdev.c | 160 ++++++++++++++++++++-- hw/core/resettable.c | 301 +++++++++++++++++++++++++++++++++++++++++ hw/hyperv/hyperv.c | 2 +- hw/i386/microvm.c | 2 +- hw/i386/pc.c | 2 +- hw/ide/microdrive.c | 8 +- hw/intc/arm_gicv3_kvm.c | 11 +- hw/intc/spapr_xive.c | 2 +- hw/misc/pca9552.c | 90 ++++++++++++ hw/net/ftgmac100.c | 13 ++ hw/ppc/pnv_psi.c | 4 +- hw/ppc/spapr_pci.c | 2 +- hw/ppc/spapr_vio.c | 2 +- hw/s390x/ipl.c | 10 +- hw/s390x/s390-pci-inst.c | 2 +- hw/scsi/vmw_pvscsi.c | 2 +- hw/sd/aspeed_sdhci.c | 11 +- hw/sd/omap_mmc.c | 2 +- hw/sd/pl181.c | 2 +- target/arm/arm-semi.c | 9 ++ target/arm/cpu.c | 2 + target/arm/cpu64.c | 1 + target/arm/kvm.c | 120 ++++++++++++++++ target/arm/kvm32.c | 3 + target/arm/kvm64.c | 4 + target/arm/machine.c | 7 + target/arm/monitor.c | 1 + tests/qtest/arm-cpu-features.c | 41 ++++-- vl.c | 10 +- docs/arm-cpu-features.rst | 37 ++++- docs/devel/index.rst | 1 + docs/devel/reset.rst | 289 +++++++++++++++++++++++++++++++++++++++ hw/core/trace-events | 27 ++++ 51 files changed, 1727 insertions(+), 90 deletions(-) create mode 100644 include/hw/resettable.h create mode 100644 hw/core/resettable.c create mode 100644 docs/devel/reset.rst The num-lines property of the TYPE_OR_GATE device sets the number of input lines it has. An assert() in or_irq_realize() restricts this to the maximum supported by the implementation. However we got the condition in the assert wrong: it should be using <=, because num-lines == MAX_OR_LINES is permitted, and means that all entries from 0 to MAX_OR_LINES-1 in the s->levels[] array are used. We didn't notice this previously because no user has so far needed that many input lines. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Message-id: 20200120142235.10432-1-peter.maydell@linaro.org --- hw/core/or-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/core/or-irq.c b/hw/core/or-irq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/or-irq.c +++ b/hw/core/or-irq.c @@ -XXX,XX +XXX,XX @@ static void or_irq_realize(DeviceState *dev, Error **errp) { qemu_or_irq *s = OR_IRQ(dev); - assert(s->num_lines < MAX_OR_LINES); + assert(s->num_lines <= MAX_OR_LINES); qdev_init_gpio_in(dev, or_irq_handler, s->num_lines); } -- 2.20.1 The guest can use the semihosting API to open a handle corresponding to QEMU's own stdin, stdout, or stderr. When the guest closes this handle, we should not close the underlying host stdin/stdout/stderr the way we would do if the handle corresponded to a host fd we'd opened on behalf of the guest in SYS_OPEN. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200124172954.28481-1-peter.maydell@linaro.org --- target/arm/arm-semi.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/arm-semi.c b/target/arm/arm-semi.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/arm-semi.c +++ b/target/arm/arm-semi.c @@ -XXX,XX +XXX,XX @@ static uint32_t host_closefn(ARMCPU *cpu, GuestFD *gf) { CPUARMState *env = &cpu->env; + /* + * Only close the underlying host fd if it's one we opened on behalf + * of the guest in SYS_OPEN. + */ + if (gf->hostfd == STDIN_FILENO || + gf->hostfd == STDOUT_FILENO || + gf->hostfd == STDERR_FILENO) { + return 0; + } return set_swi_errno(env, close(gf->hostfd)); } -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> The AST2600 includes a second cut-down version of the SD/MMC controller found in the AST2500, named the eMMC controller. It's cut down in the sense that it only supports one slot rather than two, but it brings the total number of slots supported by the AST2600 to three. The existing code assumed that the SD controller always provided two slots. Rework the SDHCI object to expose the number of slots as a property to be set by the SoC configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-2-clg@kaod.org [PMM: fixed up to use device_class_set_props()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/sd/aspeed_sdhci.h | 1 + hw/arm/aspeed.c | 2 +- hw/arm/aspeed_ast2600.c | 2 ++ hw/arm/aspeed_soc.c | 2 ++ hw/sd/aspeed_sdhci.c | 11 +++++++++-- 5 files changed, 15 insertions(+), 3 deletions(-) diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/sd/aspeed_sdhci.h +++ b/include/hw/sd/aspeed_sdhci.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSDHCIState { SysBusDevice parent; SDHCIState slots[ASPEED_SDHCI_NUM_SLOTS]; + uint8_t num_slots; MemoryRegion iomem; qemu_irq irq; diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) amc->i2c_init(bmc); } - for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) { + for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { SDHCIState *sdhci = &bmc->soc.sdhci.slots[i]; DriveInfo *dinfo = drive_get_next(IF_SD); BlockBackend *blk; diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), TYPE_ASPEED_SDHCI); + object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); + /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), TYPE_ASPEED_SDHCI); + object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); + /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/aspeed_sdhci.c +++ b/hw/sd/aspeed_sdhci.c @@ -XXX,XX +XXX,XX @@ #include "qapi/error.h" #include "hw/irq.h" #include "migration/vmstate.h" +#include "hw/qdev-properties.h" #define ASPEED_SDHCI_INFO 0x00 #define ASPEED_SDHCI_INFO_RESET 0x00030000 @@ -XXX,XX +XXX,XX @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp) /* Create input irqs for the slots */ qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq, - sdhci, NULL, ASPEED_SDHCI_NUM_SLOTS); + sdhci, NULL, sdhci->num_slots); sysbus_init_irq(sbd, &sdhci->irq); memory_region_init_io(&sdhci->iomem, OBJECT(sdhci), &aspeed_sdhci_ops, sdhci, TYPE_ASPEED_SDHCI, 0x1000); sysbus_init_mmio(sbd, &sdhci->iomem); - for (int i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { + for (int i = 0; i < sdhci->num_slots; ++i) { Object *sdhci_slot = OBJECT(&sdhci->slots[i]); SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]); @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_sdhci = { }, }; +static Property aspeed_sdhci_properties[] = { + DEFINE_PROP_UINT8("num-slots", AspeedSDHCIState, num_slots, 0), + DEFINE_PROP_END_OF_LIST(), +}; + static void aspeed_sdhci_class_init(ObjectClass *classp, void *data) { DeviceClass *dc = DEVICE_CLASS(classp); @@ -XXX,XX +XXX,XX @@ static void aspeed_sdhci_class_init(ObjectClass *classp, void *data) dc->realize = aspeed_sdhci_realize; dc->reset = aspeed_sdhci_reset; dc->vmsd = &vmstate_aspeed_sdhci; + device_class_set_props(dc, aspeed_sdhci_properties); } static TypeInfo aspeed_sdhci_info = { -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> Initialise another SDHCI model instance for the AST2600's eMMC controller and use the SDHCI's num_slots value introduced previously to determine whether we should create an SD card instance for the new slot. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-3-clg@kaod.org [ clg : - removed ternary operator from sdhci_attach_drive() - renamed SDHCI objects with a '-controller' prefix ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 2 ++ hw/arm/aspeed.c | 26 +++++++++++++++++--------- hw/arm/aspeed_ast2600.c | 29 ++++++++++++++++++++++++++--- 3 files changed, 45 insertions(+), 12 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedGPIOState gpio; AspeedGPIOState gpio_1_8v; AspeedSDHCIState sdhci; + AspeedSDHCIState emmc; } AspeedSoCState; #define TYPE_ASPEED_SOC "aspeed-soc" @@ -XXX,XX +XXX,XX @@ enum { ASPEED_MII4, ASPEED_SDRAM, ASPEED_XDMA, + ASPEED_EMMC, }; #endif /* ASPEED_SOC_H */ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } +static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo) +{ + DeviceState *card; + + card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), + TYPE_SD_CARD); + if (dinfo) { + qdev_prop_set_drive(card, "drive", blk_by_legacy_dinfo(dinfo), + &error_fatal); + } + object_property_set_bool(OBJECT(card), true, "realized", &error_fatal); +} + static void aspeed_machine_init(MachineState *machine) { AspeedBoardState *bmc; @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) } for (i = 0; i < bmc->soc.sdhci.num_slots; i++) { - SDHCIState *sdhci = &bmc->soc.sdhci.slots[i]; - DriveInfo *dinfo = drive_get_next(IF_SD); - BlockBackend *blk; - DeviceState *card; + sdhci_attach_drive(&bmc->soc.sdhci.slots[i], drive_get_next(IF_SD)); + } - blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL; - card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"), - TYPE_SD_CARD); - qdev_prop_set_drive(card, "drive", blk, &error_fatal); - object_property_set_bool(OBJECT(card), true, "realized", &error_fatal); + if (bmc->soc.emmc.num_slots) { + sdhci_attach_drive(&bmc->soc.emmc.slots[0], drive_get_next(IF_SD)); } arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo); diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { [ASPEED_ADC] = 0x1E6E9000, [ASPEED_VIDEO] = 0x1E700000, [ASPEED_SDHCI] = 0x1E740000, + [ASPEED_EMMC] = 0x1E750000, [ASPEED_GPIO] = 0x1E780000, [ASPEED_GPIO_1_8V] = 0x1E780800, [ASPEED_RTC] = 0x1E781000, @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2600_memmap[] = { #define ASPEED_SOC_AST2600_MAX_IRQ 128 +/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */ static const int aspeed_soc_ast2600_irqmap[] = { [ASPEED_UART1] = 47, [ASPEED_UART2] = 48, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2600_irqmap[] = { [ASPEED_ADC] = 78, [ASPEED_XDMA] = 6, [ASPEED_SDHCI] = 43, + [ASPEED_EMMC] = 15, [ASPEED_GPIO] = 40, [ASPEED_GPIO_1_8V] = 11, [ASPEED_RTC] = 13, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_init(Object *obj) sysbus_init_child_obj(obj, "gpio_1_8v", OBJECT(&s->gpio_1_8v), sizeof(s->gpio_1_8v), typename); - sysbus_init_child_obj(obj, "sdc", OBJECT(&s->sdhci), sizeof(s->sdhci), - TYPE_ASPEED_SDHCI); + sysbus_init_child_obj(obj, "sd-controller", OBJECT(&s->sdhci), + sizeof(s->sdhci), TYPE_ASPEED_SDHCI); object_property_set_int(OBJECT(&s->sdhci), 2, "num-slots", &error_abort); /* Init sd card slot class here so that they're under the correct parent */ for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) { - sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]), + sysbus_init_child_obj(obj, "sd-controller.sdhci[*]", + OBJECT(&s->sdhci.slots[i]), sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI); } + + sysbus_init_child_obj(obj, "emmc-controller", OBJECT(&s->emmc), + sizeof(s->emmc), TYPE_ASPEED_SDHCI); + + object_property_set_int(OBJECT(&s->emmc), 1, "num-slots", &error_abort); + + sysbus_init_child_obj(obj, "emmc-controller.sdhci", + OBJECT(&s->emmc.slots[0]), sizeof(s->emmc.slots[0]), + TYPE_SYSBUS_SDHCI); } /* @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) sc->memmap[ASPEED_SDHCI]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0, aspeed_soc_get_irq(s, ASPEED_SDHCI)); + + /* eMMC */ + object_property_set_bool(OBJECT(&s->emmc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_EMMC]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0, + aspeed_soc_get_irq(s, ASPEED_EMMC)); } static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> These buffers should be aligned on 16 bytes. Ignore invalid RX and TX buffer addresses and log an error. All incoming and outgoing traffic will be dropped because no valid RX or TX descriptors will be available. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-4-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/net/ftgmac100.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/hw/net/ftgmac100.c b/hw/net/ftgmac100.c index XXXXXXX..XXXXXXX 100644 --- a/hw/net/ftgmac100.c +++ b/hw/net/ftgmac100.c @@ -XXX,XX +XXX,XX @@ typedef struct { uint32_t des3; } FTGMAC100Desc; +#define FTGMAC100_DESC_ALIGNMENT 16 + /* * Specific RTL8211E MII Registers */ @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, s->itc = value; break; case FTGMAC100_RXR_BADR: /* Ring buffer address */ + if (!QEMU_IS_ALIGNED(value, FTGMAC100_DESC_ALIGNMENT)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad RX buffer alignment 0x%" + HWADDR_PRIx "\n", __func__, value); + return; + } + s->rx_ring = value; s->rx_descriptor = s->rx_ring; break; @@ -XXX,XX +XXX,XX @@ static void ftgmac100_write(void *opaque, hwaddr addr, break; case FTGMAC100_NPTXR_BADR: /* Transmit buffer address */ + if (!QEMU_IS_ALIGNED(value, FTGMAC100_DESC_ALIGNMENT)) { + qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad TX buffer alignment 0x%" + HWADDR_PRIx "\n", __func__, value); + return; + } s->tx_ring = value; s->tx_descriptor = s->tx_ring; break; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The overhead for the OpenBMC firmware images using the a custom U-Boot is around 2 seconds, which is fine, but with a U-Boot from mainline, it takes an extra 50 seconds or so to reach Linux. A quick survey on the number of reads performed on the flash memory region gives the following figures : OpenBMC U-Boot 922478 (~ 3.5 MBytes) Mainline U-Boot 20569977 (~ 80 MBytes) QEMU must be trashing the TCG TBs and reloading text very often. Some addresses are read more than 250.000 times. Until we find a solution to improve boot time, execution from MMIO is not activated by default. Setting this option also breaks migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200114103433.30534-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed.h | 2 ++ hw/arm/aspeed.c | 44 ++++++++++++++++++++++++++++++++++++----- 2 files changed, 41 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed.h +++ b/include/hw/arm/aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedBoardState AspeedBoardState; typedef struct AspeedMachine { MachineState parent_obj; + + bool mmio_exec; } AspeedMachine; #define ASPEED_MACHINE_CLASS(klass) \ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_init(MachineState *machine) * SoC and 128MB for the AST2500 SoC, which is twice as big as * needed by the flash modules of the Aspeed machines. */ - memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom", - fl->size, &error_abort); - memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, - boot_rom); - write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort); + if (ASPEED_MACHINE(machine)->mmio_exec) { + memory_region_init_alias(boot_rom, OBJECT(bmc), "aspeed.boot_rom", + &fl->mmio, 0, fl->size); + memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, + boot_rom); + } else { + memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom", + fl->size, &error_abort); + memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR, + boot_rom); + write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort); + } } aspeed_board_binfo.ram_size = ram_size; @@ -XXX,XX +XXX,XX @@ static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) /* Bus 11: TODO ucd90160@64 */ } +static bool aspeed_get_mmio_exec(Object *obj, Error **errp) +{ + return ASPEED_MACHINE(obj)->mmio_exec; +} + +static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp) +{ + ASPEED_MACHINE(obj)->mmio_exec = value; +} + +static void aspeed_machine_instance_init(Object *obj) +{ + ASPEED_MACHINE(obj)->mmio_exec = false; +} + +static void aspeed_machine_class_props_init(ObjectClass *oc) +{ + object_class_property_add_bool(oc, "execute-in-place", + aspeed_get_mmio_exec, + aspeed_set_mmio_exec, &error_abort); + object_class_property_set_description(oc, "execute-in-place", + "boot directly from CE0 flash device", &error_abort); +} + static void aspeed_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->no_floppy = 1; mc->no_cdrom = 1; mc->no_parallel = 1; + + aspeed_machine_class_props_init(oc); } static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data) @@ -XXX,XX +XXX,XX @@ static const TypeInfo aspeed_machine_types[] = { .name = TYPE_ASPEED_MACHINE, .parent = TYPE_MACHINE, .instance_size = sizeof(AspeedMachine), + .instance_init = aspeed_machine_instance_init, .class_size = sizeof(AspeedMachineClass), .class_init = aspeed_machine_class_init, .abstract = true, -- 2.20.1 From: Joel Stanley <joel@jms.id.au> Following the pattern of the work recently done with the ASPEED GPIO model, this adds support for inspecting and modifying the PCA9552 LEDs from the monitor. (qemu) qom-set /machine/unattached/device[17] led0 on (qemu) qom-set /machine/unattached/device[17] led0 off (qemu) qom-set /machine/unattached/device[17] led0 pwm0 (qemu) qom-set /machine/unattached/device[17] led0 pwm1 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-6-clg@kaod.org [clg: - removed the "qom-get" examples from the commit log - merged memory leak fixes from Joel ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/pca9552.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/pca9552.c +++ b/hw/misc/pca9552.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/pca9552.h" #include "hw/misc/pca9552_regs.h" #include "migration/vmstate.h" +#include "qapi/error.h" +#include "qapi/visitor.h" #define PCA9552_LED_ON 0x0 #define PCA9552_LED_OFF 0x1 #define PCA9552_LED_PWM0 0x2 #define PCA9552_LED_PWM1 0x3 +static const char *led_state[] = {"on", "off", "pwm0", "pwm1"}; + static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin) { uint8_t reg = PCA9552_LS0 + (pin / 4); @@ -XXX,XX +XXX,XX @@ static int pca9552_event(I2CSlave *i2c, enum i2c_event event) return 0; } +static void pca9552_get_led(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + PCA9552State *s = PCA9552(obj); + int led, rc, reg; + uint8_t state; + + rc = sscanf(name, "led%2d", &led); + if (rc != 1) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } + if (led < 0 || led > s->nr_leds) { + error_setg(errp, "%s invalid led %s", __func__, name); + return; + } + /* + * Get the LSx register as the qom interface should expose the device + * state, not the modeled 'input line' behaviour which would come from + * reading the INPUTx reg + */ + reg = PCA9552_LS0 + led / 4; + state = (pca9552_read(s, reg) >> (led % 8)) & 0x3; + visit_type_str(v, name, (char **)&led_state[state], errp); +} + +/* + * Return an LED selector register value based on an existing one, with + * the appropriate 2-bit state value set for the given LED number (0-3). + */ +static inline uint8_t pca955x_ledsel(uint8_t oldval, int led_num, int state) +{ + return (oldval & (~(0x3 << (led_num << 1)))) | + ((state & 0x3) << (led_num << 1)); +} + +static void pca9552_set_led(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + PCA9552State *s = PCA9552(obj); + Error *local_err = NULL; + int led, rc, reg, val; + uint8_t state; + char *state_str; + + visit_type_str(v, name, &state_str, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + rc = sscanf(name, "led%2d", &led); + if (rc != 1) { + error_setg(errp, "%s: error reading %s", __func__, name); + return; + } + if (led < 0 || led > s->nr_leds) { + error_setg(errp, "%s invalid led %s", __func__, name); + return; + } + + for (state = 0; state < ARRAY_SIZE(led_state); state++) { + if (!strcmp(state_str, led_state[state])) { + break; + } + } + if (state >= ARRAY_SIZE(led_state)) { + error_setg(errp, "%s invalid led state %s", __func__, state_str); + return; + } + + reg = PCA9552_LS0 + led / 4; + val = pca9552_read(s, reg); + val = pca955x_ledsel(val, led % 4, state); + pca9552_write(s, reg, val); +} + static const VMStateDescription pca9552_vmstate = { .name = "PCA9552", .version_id = 0, @@ -XXX,XX +XXX,XX @@ static void pca9552_reset(DeviceState *dev) static void pca9552_initfn(Object *obj) { PCA9552State *s = PCA9552(obj); + int led; /* If support for the other PCA955X devices are implemented, these * constant values might be part of class structure describing the @@ -XXX,XX +XXX,XX @@ static void pca9552_initfn(Object *obj) */ s->max_reg = PCA9552_LS3; s->nr_leds = 16; + + for (led = 0; led < s->nr_leds; led++) { + char *name; + + name = g_strdup_printf("led%d", led); + object_property_add(obj, name, "bool", pca9552_get_led, pca9552_set_led, + NULL, NULL, NULL); + g_free(name); + } } static void pca9552_class_init(ObjectClass *klass, void *data) -- 2.20.1 From: Philippe Mathieu-Daudé <f4bug@amsat.org> Since we enabled parallel TCG code generation for softmmu (see commit 3468b59 "tcg: enable multiple TCG contexts in softmmu") and its subsequent fix (commit 72649619 "add .min_cpus and .default_cpus fields to machine_class"), the raspi machines are restricted to always use their 4 cores: See in hw/arm/raspi2 (with BCM283X_NCPUS set to 4): 222 static void raspi2_machine_init(MachineClass *mc) 223 { 224 mc->desc = "Raspberry Pi 2"; 230 mc->max_cpus = BCM283X_NCPUS; 231 mc->min_cpus = BCM283X_NCPUS; 232 mc->default_cpus = BCM283X_NCPUS; 235 }; 236 DEFINE_MACHINE("raspi2", raspi2_machine_init) We can no longer use the -smp option, as we get: $ qemu-system-arm -M raspi2 -smp 1 qemu-system-arm: Invalid SMP CPUs 1. The min CPUs supported by machine 'raspi2' is 4 Since we can not set the TYPE_BCM283x SOC "enabled-cpus" with -smp, remove the unuseful code. We can achieve the same by using the '-global bcm2836.enabled-cpus=1' option. Reported-by: Laurent Bonnans <laurent.bonnans@here.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20200120235159.18510-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/raspi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/raspi.c +++ b/hw/arm/raspi.c @@ -XXX,XX +XXX,XX @@ static void raspi_init(MachineState *machine, int version) /* Setup the SOC */ object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram), &error_abort); - object_property_set_int(OBJECT(&s->soc), machine->smp.cpus, "enabled-cpus", - &error_abort); int board_rev = version == 3 ? 0xa02082 : 0xa21041; object_property_set_int(OBJECT(&s->soc), board_rev, "board-rev", &error_abort); -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Provide a temporary device_legacy_reset function doing what device_reset does to prepare for the transition with Resettable API. All occurrence of device_reset in the code tree are also replaced by device_legacy_reset. The new resettable API has different prototype and semantics (resetting child buses as well as the specified device). Subsequent commits will make the changeover for each call site individually; once that is complete device_legacy_reset() will be removed. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-2-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-core.h | 4 ++-- hw/audio/intel-hda.c | 2 +- hw/core/qdev.c | 6 +++--- hw/hyperv/hyperv.c | 2 +- hw/i386/microvm.c | 2 +- hw/i386/pc.c | 2 +- hw/ide/microdrive.c | 8 ++++---- hw/intc/spapr_xive.c | 2 +- hw/ppc/pnv_psi.c | 4 ++-- hw/ppc/spapr_pci.c | 2 +- hw/ppc/spapr_vio.c | 2 +- hw/s390x/s390-pci-inst.c | 2 +- hw/scsi/vmw_pvscsi.c | 2 +- hw/sd/omap_mmc.c | 2 +- hw/sd/pl181.c | 2 +- 15 files changed, 22 insertions(+), 22 deletions(-) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ char *qdev_get_own_fw_dev_path_from_handler(BusState *bus, DeviceState *dev); void qdev_machine_init(void); /** - * @device_reset + * device_legacy_reset: * * Reset a single device (by calling the reset method). */ -void device_reset(DeviceState *dev); +void device_legacy_reset(DeviceState *dev); void device_class_set_props(DeviceClass *dc, Property *props); diff --git a/hw/audio/intel-hda.c b/hw/audio/intel-hda.c index XXXXXXX..XXXXXXX 100644 --- a/hw/audio/intel-hda.c +++ b/hw/audio/intel-hda.c @@ -XXX,XX +XXX,XX @@ static void intel_hda_reset(DeviceState *dev) QTAILQ_FOREACH(kid, &d->codecs.qbus.children, sibling) { DeviceState *qdev = kid->child; cdev = HDA_CODEC_DEVICE(qdev); - device_reset(DEVICE(cdev)); + device_legacy_reset(DEVICE(cdev)); d->state_sts |= (1 << cdev->cad); } intel_hda_update_irq(d); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev) static int qdev_reset_one(DeviceState *dev, void *opaque) { - device_reset(dev); + device_legacy_reset(dev); return 0; } @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } if (dev->hotplugged) { - device_reset(dev); + device_legacy_reset(dev); } dev->pending_deleted_event = false; @@ -XXX,XX +XXX,XX @@ void device_class_set_parent_unrealize(DeviceClass *dc, dc->unrealize = dev_unrealize; } -void device_reset(DeviceState *dev) +void device_legacy_reset(DeviceState *dev) { DeviceClass *klass = DEVICE_GET_CLASS(dev); diff --git a/hw/hyperv/hyperv.c b/hw/hyperv/hyperv.c index XXXXXXX..XXXXXXX 100644 --- a/hw/hyperv/hyperv.c +++ b/hw/hyperv/hyperv.c @@ -XXX,XX +XXX,XX @@ void hyperv_synic_reset(CPUState *cs) SynICState *synic = get_synic(cs); if (synic) { - device_reset(DEVICE(synic)); + device_legacy_reset(DEVICE(synic)); } } diff --git a/hw/i386/microvm.c b/hw/i386/microvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/microvm.c +++ b/hw/i386/microvm.c @@ -XXX,XX +XXX,XX @@ static void microvm_machine_reset(MachineState *machine) cpu = X86_CPU(cs); if (cpu->apic_state) { - device_reset(cpu->apic_state); + device_legacy_reset(cpu->apic_state); } } } diff --git a/hw/i386/pc.c b/hw/i386/pc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/i386/pc.c +++ b/hw/i386/pc.c @@ -XXX,XX +XXX,XX @@ static void pc_machine_reset(MachineState *machine) cpu = X86_CPU(cs); if (cpu->apic_state) { - device_reset(cpu->apic_state); + device_legacy_reset(cpu->apic_state); } } } diff --git a/hw/ide/microdrive.c b/hw/ide/microdrive.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ide/microdrive.c +++ b/hw/ide/microdrive.c @@ -XXX,XX +XXX,XX @@ static void md_attr_write(PCMCIACardState *card, uint32_t at, uint8_t value) case 0x00: /* Configuration Option Register */ s->opt = value & 0xcf; if (value & OPT_SRESET) { - device_reset(DEVICE(s)); + device_legacy_reset(DEVICE(s)); } md_interrupt_update(s); break; @@ -XXX,XX +XXX,XX @@ static void md_common_write(PCMCIACardState *card, uint32_t at, uint16_t value) case 0xe: /* Device Control */ s->ctrl = value; if (value & CTRL_SRST) { - device_reset(DEVICE(s)); + device_legacy_reset(DEVICE(s)); } md_interrupt_update(s); break; @@ -XXX,XX +XXX,XX @@ static int dscm1xxxx_attach(PCMCIACardState *card) md->attr_base = pcc->cis[0x74] | (pcc->cis[0x76] << 8); md->io_base = 0x0; - device_reset(DEVICE(md)); + device_legacy_reset(DEVICE(md)); md_interrupt_update(md); return 0; @@ -XXX,XX +XXX,XX @@ static int dscm1xxxx_detach(PCMCIACardState *card) { MicroDriveState *md = MICRODRIVE(card); - device_reset(DEVICE(md)); + device_legacy_reset(DEVICE(md)); return 0; } diff --git a/hw/intc/spapr_xive.c b/hw/intc/spapr_xive.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/spapr_xive.c +++ b/hw/intc/spapr_xive.c @@ -XXX,XX +XXX,XX @@ static target_ulong h_int_reset(PowerPCCPU *cpu, return H_PARAMETER; } - device_reset(DEVICE(xive)); + device_legacy_reset(DEVICE(xive)); if (kvm_irqchip_in_kernel()) { Error *local_err = NULL; diff --git a/hw/ppc/pnv_psi.c b/hw/ppc/pnv_psi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/pnv_psi.c +++ b/hw/ppc/pnv_psi.c @@ -XXX,XX +XXX,XX @@ static void pnv_psi_reset(DeviceState *dev) static void pnv_psi_reset_handler(void *dev) { - device_reset(DEVICE(dev)); + device_legacy_reset(DEVICE(dev)); } static void pnv_psi_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void pnv_psi_p9_mmio_write(void *opaque, hwaddr addr, break; case PSIHB9_INTERRUPT_CONTROL: if (val & PSIHB9_IRQ_RESET) { - device_reset(DEVICE(&psi9->source)); + device_legacy_reset(DEVICE(&psi9->source)); } psi->regs[reg] = val; break; diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr_pci.c +++ b/hw/ppc/spapr_pci.c @@ -XXX,XX +XXX,XX @@ static int spapr_phb_children_reset(Object *child, void *opaque) DeviceState *dev = (DeviceState *) object_dynamic_cast(child, TYPE_DEVICE); if (dev) { - device_reset(dev); + device_legacy_reset(dev); } return 0; diff --git a/hw/ppc/spapr_vio.c b/hw/ppc/spapr_vio.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ppc/spapr_vio.c +++ b/hw/ppc/spapr_vio.c @@ -XXX,XX +XXX,XX @@ int spapr_vio_send_crq(SpaprVioDevice *dev, uint8_t *crq) static void spapr_vio_quiesce_one(SpaprVioDevice *dev) { if (dev->tcet) { - device_reset(DEVICE(dev->tcet)); + device_legacy_reset(DEVICE(dev->tcet)); } free_crq(dev); } diff --git a/hw/s390x/s390-pci-inst.c b/hw/s390x/s390-pci-inst.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/s390-pci-inst.c +++ b/hw/s390x/s390-pci-inst.c @@ -XXX,XX +XXX,XX @@ int clp_service_call(S390CPU *cpu, uint8_t r2, uintptr_t ra) stw_p(&ressetpci->hdr.rsp, CLP_RC_SETPCIFN_FHOP); goto out; } - device_reset(DEVICE(pbdev)); + device_legacy_reset(DEVICE(pbdev)); pbdev->fh &= ~FH_MASK_ENABLE; pbdev->state = ZPCI_FS_DISABLED; stl_p(&ressetpci->fh, pbdev->fh); diff --git a/hw/scsi/vmw_pvscsi.c b/hw/scsi/vmw_pvscsi.c index XXXXXXX..XXXXXXX 100644 --- a/hw/scsi/vmw_pvscsi.c +++ b/hw/scsi/vmw_pvscsi.c @@ -XXX,XX +XXX,XX @@ pvscsi_on_cmd_reset_device(PVSCSIState *s) if (sdev != NULL) { s->resetting++; - device_reset(&sdev->qdev); + device_legacy_reset(&sdev->qdev); s->resetting--; return PVSCSI_COMMAND_PROCESSING_SUCCEEDED; } diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -XXX,XX +XXX,XX @@ void omap_mmc_reset(struct omap_mmc_s *host) * into any bus, and we must reset it manually. When omap_mmc is * QOMified this must move into the QOM reset function. */ - device_reset(DEVICE(host->card)); + device_legacy_reset(DEVICE(host->card)); } static uint64_t omap_mmc_read(void *opaque, hwaddr offset, diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c index XXXXXXX..XXXXXXX 100644 --- a/hw/sd/pl181.c +++ b/hw/sd/pl181.c @@ -XXX,XX +XXX,XX @@ static void pl181_reset(DeviceState *d) /* Since we're still using the legacy SD API the card is not plugged * into any bus, and we must reset it manually. */ - device_reset(DEVICE(s->card)); + device_legacy_reset(DEVICE(s->card)); } static void pl181_init(Object *obj) -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Adds trace events to reset procedure and when updating the parent bus of a device. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-3-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/qdev.c | 29 ++++++++++++++++++++++++++--- hw/core/trace-events | 9 +++++++++ 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ #include "hw/boards.h" #include "hw/sysbus.h" #include "migration/vmstate.h" +#include "trace.h" bool qdev_hotplug = false; static bool qdev_hot_added = false; @@ -XXX,XX +XXX,XX @@ void qdev_set_parent_bus(DeviceState *dev, BusState *bus) bool replugging = dev->parent_bus != NULL; if (replugging) { - /* Keep a reference to the device while it's not plugged into + trace_qdev_update_parent_bus(dev, object_get_typename(OBJECT(dev)), + dev->parent_bus, object_get_typename(OBJECT(dev->parent_bus)), + OBJECT(bus), object_get_typename(OBJECT(bus))); + /* + * Keep a reference to the device while it's not plugged into * any bus, to avoid it potentially evaporating when it is * dereffed in bus_remove_child(). */ @@ -XXX,XX +XXX,XX @@ HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev) return hotplug_ctrl; } +static int qdev_prereset(DeviceState *dev, void *opaque) +{ + trace_qdev_reset_tree(dev, object_get_typename(OBJECT(dev))); + return 0; +} + +static int qbus_prereset(BusState *bus, void *opaque) +{ + trace_qbus_reset_tree(bus, object_get_typename(OBJECT(bus))); + return 0; +} + static int qdev_reset_one(DeviceState *dev, void *opaque) { device_legacy_reset(dev); @@ -XXX,XX +XXX,XX @@ static int qdev_reset_one(DeviceState *dev, void *opaque) static int qbus_reset_one(BusState *bus, void *opaque) { BusClass *bc = BUS_GET_CLASS(bus); + trace_qbus_reset(bus, object_get_typename(OBJECT(bus))); if (bc->reset) { bc->reset(bus); } @@ -XXX,XX +XXX,XX @@ static int qbus_reset_one(BusState *bus, void *opaque) void qdev_reset_all(DeviceState *dev) { - qdev_walk_children(dev, NULL, NULL, qdev_reset_one, qbus_reset_one, NULL); + trace_qdev_reset_all(dev, object_get_typename(OBJECT(dev))); + qdev_walk_children(dev, qdev_prereset, qbus_prereset, + qdev_reset_one, qbus_reset_one, NULL); } void qdev_reset_all_fn(void *opaque) @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque) void qbus_reset_all(BusState *bus) { - qbus_walk_children(bus, NULL, NULL, qdev_reset_one, qbus_reset_one, NULL); + trace_qbus_reset_all(bus, object_get_typename(OBJECT(bus))); + qbus_walk_children(bus, qdev_prereset, qbus_prereset, + qdev_reset_one, qbus_reset_one, NULL); } void qbus_reset_all_fn(void *opaque) @@ -XXX,XX +XXX,XX @@ void device_legacy_reset(DeviceState *dev) { DeviceClass *klass = DEVICE_GET_CLASS(dev); + trace_qdev_reset(dev, object_get_typename(OBJECT(dev))); if (klass->reset) { klass->reset(dev); } diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ # loader.c loader_write_rom(const char *name, uint64_t gpa, uint64_t size, bool isrom) "%s: @0x%"PRIx64" size=0x%"PRIx64" ROM=%d" + +# qdev.c +qdev_reset(void *obj, const char *objtype) "obj=%p(%s)" +qdev_reset_all(void *obj, const char *objtype) "obj=%p(%s)" +qdev_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset_all(void *obj, const char *objtype) "obj=%p(%s)" +qbus_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" +qdev_update_parent_bus(void *obj, const char *objtype, void *oldp, const char *oldptype, void *newp, const char *newptype) "obj=%p(%s) old_parent=%p(%s) new_parent=%p(%s)" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit defines an interface allowing multi-phase reset. This aims to solve a problem of the actual single-phase reset (built in DeviceClass and BusClass): reset behavior is dependent on the order in which reset handlers are called. In particular doing external side-effect (like setting an qemu_irq) is problematic because receiving object may not be reset yet. The Resettable interface divides the reset in 3 well defined phases. To reset an object tree, all 1st phases are executed then all 2nd then all 3rd. See the comments in include/hw/resettable.h for a more complete description. The interface defines 3 phases to let the future possibility of holding an object into reset for some time. The qdev/qbus reset in DeviceClass and BusClass will be modified in following commits to use this interface. A mechanism is provided to allow executing a transitional reset handler in place of the 2nd phase which is executed in children-then-parent order inside a tree. This will allow to transition devices and buses smoothly while keeping the exact current qdev/qbus reset behavior for now. Documentation will be added in a following commit. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-4-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/Makefile.objs | 1 + include/hw/resettable.h | 211 +++++++++++++++++++++++++++++++++++ hw/core/resettable.c | 238 ++++++++++++++++++++++++++++++++++++++++ hw/core/trace-events | 17 +++ 4 files changed, 467 insertions(+) create mode 100644 include/hw/resettable.h create mode 100644 hw/core/resettable.c diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -XXX,XX +XXX,XX @@ common-obj-y += qdev.o qdev-properties.o common-obj-y += bus.o common-obj-y += cpu.o +common-obj-y += resettable.o common-obj-y += hotplug.o common-obj-y += vmstate-if.o # irq.o needed for qdev GPIO handling: diff --git a/include/hw/resettable.h b/include/hw/resettable.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ +/* + * Resettable interface header. + * + * Copyright (c) 2019 GreenSocs SAS + * + * Authors: + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef HW_RESETTABLE_H +#define HW_RESETTABLE_H + +#include "qom/object.h" + +#define TYPE_RESETTABLE_INTERFACE "resettable" + +#define RESETTABLE_CLASS(class) \ + OBJECT_CLASS_CHECK(ResettableClass, (class), TYPE_RESETTABLE_INTERFACE) + +#define RESETTABLE_GET_CLASS(obj) \ + OBJECT_GET_CLASS(ResettableClass, (obj), TYPE_RESETTABLE_INTERFACE) + +typedef struct ResettableState ResettableState; + +/** + * ResetType: + * Types of reset. + * + * + Cold: reset resulting from a power cycle of the object. + * + * TODO: Support has to be added to handle more types. In particular, + * ResettableState structure needs to be expanded. + */ +typedef enum ResetType { + RESET_TYPE_COLD, +} ResetType; + +/* + * ResettableClass: + * Interface for resettable objects. + * + * See docs/devel/reset.rst for more detailed information about how QEMU models + * reset. This whole API must only be used when holding the iothread mutex. + * + * All objects which can be reset must implement this interface; + * it is usually provided by a base class such as DeviceClass or BusClass. + * Every Resettable object must maintain some state tracking the + * progress of a reset operation by providing a ResettableState structure. + * The functions defined in this module take care of updating the + * state of the reset. + * The base class implementation of the interface provides this + * state and implements the associated method: get_state. + * + * Concrete object implementations (typically specific devices + * such as a UART model) should provide the functions + * for the phases.enter, phases.hold and phases.exit methods, which + * they can set in their class init function, either directly or + * by calling resettable_class_set_parent_phases(). + * The phase methods are guaranteed to only only ever be called once + * for any reset event, in the order 'enter', 'hold', 'exit'. + * An object will always move quickly from 'enter' to 'hold' + * but might remain in 'hold' for an arbitrary period of time + * before eventually reset is deasserted and the 'exit' phase is called. + * Object implementations should be prepared for functions handling + * inbound connections from other devices (such as qemu_irq handler + * functions) to be called at any point during reset after their + * 'enter' method has been called. + * + * Users of a resettable object should not call these methods + * directly, but instead use the function resettable_reset(). + * + * @phases.enter: This phase is called when the object enters reset. It + * should reset local state of the object, but it must not do anything that + * has a side-effect on other objects, such as raising or lowering a qemu_irq + * line or reading or writing guest memory. It takes the reset's type as + * argument. + * + * @phases.hold: This phase is called for entry into reset, once every object + * in the system which is being reset has had its @phases.enter method called. + * At this point devices can do actions that affect other objects. + * + * @phases.exit: This phase is called when the object leaves the reset state. + * Actions affecting other objects are permitted. + * + * @get_state: Mandatory method which must return a pointer to a + * ResettableState. + * + * @get_transitional_function: transitional method to handle Resettable objects + * not yet fully moved to this interface. It will be removed as soon as it is + * not needed anymore. This method is optional and may return a pointer to a + * function to be used instead of the phases. If the method exists and returns + * a non-NULL function pointer then that function is executed as a replacement + * of the 'hold' phase method taking the object as argument. The two other phase + * methods are not executed. + * + * @child_foreach: Executes a given callback on every Resettable child. Child + * in this context means a child in the qbus tree, so the children of a qbus + * are the devices on it, and the children of a device are all the buses it + * owns. This is not the same as the QOM object hierarchy. The function takes + * additional opaque and ResetType arguments which must be passed unmodified to + * the callback. + */ +typedef void (*ResettableEnterPhase)(Object *obj, ResetType type); +typedef void (*ResettableHoldPhase)(Object *obj); +typedef void (*ResettableExitPhase)(Object *obj); +typedef ResettableState * (*ResettableGetState)(Object *obj); +typedef void (*ResettableTrFunction)(Object *obj); +typedef ResettableTrFunction (*ResettableGetTrFunction)(Object *obj); +typedef void (*ResettableChildCallback)(Object *, void *opaque, + ResetType type); +typedef void (*ResettableChildForeach)(Object *obj, + ResettableChildCallback cb, + void *opaque, ResetType type); +typedef struct ResettablePhases { + ResettableEnterPhase enter; + ResettableHoldPhase hold; + ResettableExitPhase exit; +} ResettablePhases; +typedef struct ResettableClass { + InterfaceClass parent_class; + + /* Phase methods */ + ResettablePhases phases; + + /* State access method */ + ResettableGetState get_state; + + /* Transitional method for legacy reset compatibility */ + ResettableGetTrFunction get_transitional_function; + + /* Hierarchy handling method */ + ResettableChildForeach child_foreach; +} ResettableClass; + +/** + * ResettableState: + * Structure holding reset related state. The fields should not be accessed + * directly; the definition is here to allow further inclusion into other + * objects. + * + * @count: Number of reset level the object is into. It is incremented when + * the reset operation starts and decremented when it finishes. + * @hold_phase_pending: flag which indicates that we need to invoke the 'hold' + * phase handler for this object. + * @exit_phase_in_progress: true if we are currently in the exit phase + */ +struct ResettableState { + unsigned count; + bool hold_phase_pending; + bool exit_phase_in_progress; +}; + +/** + * resettable_reset: + * Trigger a reset on an object @obj of type @type. @obj must implement + * Resettable interface. + * + * Calling this function is equivalent to calling @resettable_assert_reset() + * then @resettable_release_reset(). + */ +void resettable_reset(Object *obj, ResetType type); + +/** + * resettable_assert_reset: + * Put an object @obj into reset. @obj must implement Resettable interface. + * + * @resettable_release_reset() must eventually be called after this call. + * There must be one call to @resettable_release_reset() per call of + * @resettable_assert_reset(), with the same type argument. + * + * NOTE: Until support for migration is added, the @resettable_release_reset() + * must not be delayed. It must occur just after @resettable_assert_reset() so + * that migration cannot be triggered in between. Prefer using + * @resettable_reset() for now. + */ +void resettable_assert_reset(Object *obj, ResetType type); + +/** + * resettable_release_reset: + * Release the object @obj from reset. @obj must implement Resettable interface. + * + * See @resettable_assert_reset() description for details. + */ +void resettable_release_reset(Object *obj, ResetType type); + +/** + * resettable_is_in_reset: + * Return true if @obj is under reset. + * + * @obj must implement Resettable interface. + */ +bool resettable_is_in_reset(Object *obj); + +/** + * resettable_class_set_parent_phases: + * + * Save @rc current reset phases into @parent_phases and override @rc phases + * by the given new methods (@enter, @hold and @exit). + * Each phase is overridden only if the new one is not NULL allowing to + * override a subset of phases. + */ +void resettable_class_set_parent_phases(ResettableClass *rc, + ResettableEnterPhase enter, + ResettableHoldPhase hold, + ResettableExitPhase exit, + ResettablePhases *parent_phases); + +#endif diff --git a/hw/core/resettable.c b/hw/core/resettable.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ +/* + * Resettable interface. + * + * Copyright (c) 2019 GreenSocs SAS + * + * Authors: + * Damien Hedde + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/module.h" +#include "hw/resettable.h" +#include "trace.h" + +/** + * resettable_phase_enter/hold/exit: + * Function executing a phase recursively in a resettable object and its + * children. + */ +static void resettable_phase_enter(Object *obj, void *opaque, ResetType type); +static void resettable_phase_hold(Object *obj, void *opaque, ResetType type); +static void resettable_phase_exit(Object *obj, void *opaque, ResetType type); + +/** + * enter_phase_in_progress: + * True if we are currently in reset enter phase. + * + * Note: This flag is only used to guarantee (using asserts) that the reset + * API is used correctly. We can use a global variable because we rely on the + * iothread mutex to ensure only one reset operation is in a progress at a + * given time. + */ +static bool enter_phase_in_progress; + +void resettable_reset(Object *obj, ResetType type) +{ + trace_resettable_reset(obj, type); + resettable_assert_reset(obj, type); + resettable_release_reset(obj, type); +} + +void resettable_assert_reset(Object *obj, ResetType type) +{ + /* TODO: change this assert when adding support for other reset types */ + assert(type == RESET_TYPE_COLD); + trace_resettable_reset_assert_begin(obj, type); + assert(!enter_phase_in_progress); + + enter_phase_in_progress = true; + resettable_phase_enter(obj, NULL, type); + enter_phase_in_progress = false; + + resettable_phase_hold(obj, NULL, type); + + trace_resettable_reset_assert_end(obj); +} + +void resettable_release_reset(Object *obj, ResetType type) +{ + /* TODO: change this assert when adding support for other reset types */ + assert(type == RESET_TYPE_COLD); + trace_resettable_reset_release_begin(obj, type); + assert(!enter_phase_in_progress); + + resettable_phase_exit(obj, NULL, type); + + trace_resettable_reset_release_end(obj); +} + +bool resettable_is_in_reset(Object *obj) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + + return s->count > 0; +} + +/** + * resettable_child_foreach: + * helper to avoid checking the existence of the method. + */ +static void resettable_child_foreach(ResettableClass *rc, Object *obj, + ResettableChildCallback cb, + void *opaque, ResetType type) +{ + if (rc->child_foreach) { + rc->child_foreach(obj, cb, opaque, type); + } +} + +/** + * resettable_get_tr_func: + * helper to fetch transitional reset callback if any. + */ +static ResettableTrFunction resettable_get_tr_func(ResettableClass *rc, + Object *obj) +{ + ResettableTrFunction tr_func = NULL; + if (rc->get_transitional_function) { + tr_func = rc->get_transitional_function(obj); + } + return tr_func; +} + +static void resettable_phase_enter(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + bool action_needed = false; + + /* exit phase has to finish properly before entering back in reset */ + assert(!s->exit_phase_in_progress); + + trace_resettable_phase_enter_begin(obj, obj_typename, s->count, type); + + /* Only take action if we really enter reset for the 1st time. */ + /* + * TODO: if adding more ResetType support, some additional checks + * are probably needed here. + */ + if (s->count++ == 0) { + action_needed = true; + } + /* + * We limit the count to an arbitrary "big" value. The value is big + * enough not to be triggered normally. + * The assert will stop an infinite loop if there is a cycle in the + * reset tree. The loop goes through resettable_foreach_child below + * which at some point will call us again. + */ + assert(s->count <= 50); + + /* + * handle the children even if action_needed is at false so that + * child counts are incremented too + */ + resettable_child_foreach(rc, obj, resettable_phase_enter, NULL, type); + + /* execute enter phase for the object if needed */ + if (action_needed) { + trace_resettable_phase_enter_exec(obj, obj_typename, type, + !!rc->phases.enter); + if (rc->phases.enter && !resettable_get_tr_func(rc, obj)) { + rc->phases.enter(obj, type); + } + s->hold_phase_pending = true; + } + trace_resettable_phase_enter_end(obj, obj_typename, s->count); +} + +static void resettable_phase_hold(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + + /* exit phase has to finish properly before entering back in reset */ + assert(!s->exit_phase_in_progress); + + trace_resettable_phase_hold_begin(obj, obj_typename, s->count, type); + + /* handle children first */ + resettable_child_foreach(rc, obj, resettable_phase_hold, NULL, type); + + /* exec hold phase */ + if (s->hold_phase_pending) { + s->hold_phase_pending = false; + ResettableTrFunction tr_func = resettable_get_tr_func(rc, obj); + trace_resettable_phase_hold_exec(obj, obj_typename, !!rc->phases.hold); + if (tr_func) { + trace_resettable_transitional_function(obj, obj_typename); + tr_func(obj); + } else if (rc->phases.hold) { + rc->phases.hold(obj); + } + } + trace_resettable_phase_hold_end(obj, obj_typename, s->count); +} + +static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + const char *obj_typename = object_get_typename(obj); + + assert(!s->exit_phase_in_progress); + trace_resettable_phase_exit_begin(obj, obj_typename, s->count, type); + + /* exit_phase_in_progress ensures this phase is 'atomic' */ + s->exit_phase_in_progress = true; + resettable_child_foreach(rc, obj, resettable_phase_exit, NULL, type); + + assert(s->count > 0); + if (s->count == 1) { + trace_resettable_phase_exit_exec(obj, obj_typename, !!rc->phases.exit); + if (rc->phases.exit && !resettable_get_tr_func(rc, obj)) { + rc->phases.exit(obj); + } + s->count = 0; + } + s->exit_phase_in_progress = false; + trace_resettable_phase_exit_end(obj, obj_typename, s->count); +} + +void resettable_class_set_parent_phases(ResettableClass *rc, + ResettableEnterPhase enter, + ResettableHoldPhase hold, + ResettableExitPhase exit, + ResettablePhases *parent_phases) +{ + *parent_phases = rc->phases; + if (enter) { + rc->phases.enter = enter; + } + if (hold) { + rc->phases.hold = hold; + } + if (exit) { + rc->phases.exit = exit; + } +} + +static const TypeInfo resettable_interface_info = { + .name = TYPE_RESETTABLE_INTERFACE, + .parent = TYPE_INTERFACE, + .class_size = sizeof(ResettableClass), +}; + +static void reset_register_types(void) +{ + type_register_static(&resettable_interface_info); +} + +type_init(reset_register_types) diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ qbus_reset(void *obj, const char *objtype) "obj=%p(%s)" qbus_reset_all(void *obj, const char *objtype) "obj=%p(%s)" qbus_reset_tree(void *obj, const char *objtype) "obj=%p(%s)" qdev_update_parent_bus(void *obj, const char *objtype, void *oldp, const char *oldptype, void *newp, const char *newptype) "obj=%p(%s) old_parent=%p(%s) new_parent=%p(%s)" + +# resettable.c +resettable_reset(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_assert_begin(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_assert_end(void *obj) "obj=%p" +resettable_reset_release_begin(void *obj, int cold) "obj=%p cold=%d" +resettable_reset_release_end(void *obj) "obj=%p" +resettable_phase_enter_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_enter_exec(void *obj, const char *objtype, int type, int has_method) "obj=%p(%s) type=%d method=%d" +resettable_phase_enter_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_phase_hold_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_hold_exec(void *obj, const char *objtype, int has_method) "obj=%p(%s) method=%d" +resettable_phase_hold_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_phase_exit_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" +resettable_phase_exit_exec(void *obj, const char *objtype, int has_method) "obj=%p(%s) method=%d" +resettable_phase_exit_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" +resettable_transitional_function(void *obj, const char *objtype) "obj=%p(%s)" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit adds support of Resettable interface to buses and devices: + ResettableState structure is added in the Bus/Device state + Resettable methods are implemented. + device/bus_is_in_reset function defined This commit allows to transition the objects to the new multi-phase interface without changing the reset behavior at all. Object single reset method can be split into the 3 different phases but the 3 phases are still executed in a row for a given object. From the qdev/qbus reset api point of view, nothing is changed. qdev_reset_all() and qbus_reset_all() are not modified as well as device_legacy_reset(). Transition of an object must be done from parent class to child class. Care has been taken to allow the transition of a parent class without requiring the child classes to be transitioned at the same time. Note that SysBus and SysBusDevice class do not need any transition because they do not override the legacy reset method. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-5-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/Makefile.include | 1 + include/hw/qdev-core.h | 27 ++++++++++++ hw/core/bus.c | 97 ++++++++++++++++++++++++++++++++++++++++++ hw/core/qdev.c | 93 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 218 insertions(+) diff --git a/tests/Makefile.include b/tests/Makefile.include index XXXXXXX..XXXXXXX 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -XXX,XX +XXX,XX @@ tests/fp/%: tests/test-qdev-global-props$(EXESUF): tests/test-qdev-global-props.o \ hw/core/qdev.o hw/core/qdev-properties.o hw/core/hotplug.o\ hw/core/bus.o \ + hw/core/resettable.o \ hw/core/irq.o \ hw/core/fw-path-provider.o \ hw/core/reset.o \ diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ #include "qemu/bitmap.h" #include "qom/object.h" #include "hw/hotplug.h" +#include "hw/resettable.h" enum { DEV_NVECTORS_UNSPECIFIED = -1, @@ -XXX,XX +XXX,XX @@ typedef struct DeviceClass { bool hotpluggable; /* callbacks */ + /* + * Reset method here is deprecated and replaced by methods in the + * resettable class interface to implement a multi-phase reset. + * TODO: remove once every reset callback is unused + */ DeviceReset reset; DeviceRealize realize; DeviceUnrealize unrealize; @@ -XXX,XX +XXX,XX @@ struct NamedGPIOList { /** * DeviceState: * @realized: Indicates whether the device has been fully constructed. + * @reset: ResettableState for the device; handled by Resettable interface. * * This structure should not be accessed directly. We declare it here * so that it can be embedded in individual device state structures. @@ -XXX,XX +XXX,XX @@ struct DeviceState { int num_child_bus; int instance_id_alias; int alias_required_for_version; + ResettableState reset; }; struct DeviceListener { @@ -XXX,XX +XXX,XX @@ typedef struct BusChild { /** * BusState: * @hotplug_handler: link to a hotplug handler associated with bus. + * @reset: ResettableState for the bus; handled by Resettable interface. */ struct BusState { Object obj; @@ -XXX,XX +XXX,XX @@ struct BusState { int num_children; QTAILQ_HEAD(, BusChild) children; QLIST_ENTRY(BusState) sibling; + ResettableState reset; }; /** @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque); void qbus_reset_all(BusState *bus); void qbus_reset_all_fn(void *opaque); +/** + * device_is_in_reset: + * Return true if the device @dev is currently being reset. + */ +bool device_is_in_reset(DeviceState *dev); + +/** + * bus_is_in_reset: + * Return true if the bus @bus is currently being reset. + */ +bool bus_is_in_reset(BusState *bus); + /* This should go away once we get rid of the NULL bus hack */ BusState *sysbus_get_default(void); @@ -XXX,XX +XXX,XX @@ void device_legacy_reset(DeviceState *dev); void device_class_set_props(DeviceClass *dc, Property *props); +/** + * device_class_set_parent_reset: + * TODO: remove the function when DeviceClass's reset method + * is not used anymore. + */ void device_class_set_parent_reset(DeviceClass *dc, DeviceReset dev_reset, DeviceReset *parent_reset); diff --git a/hw/core/bus.c b/hw/core/bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/bus.c +++ b/hw/core/bus.c @@ -XXX,XX +XXX,XX @@ int qbus_walk_children(BusState *bus, return 0; } +bool bus_is_in_reset(BusState *bus) +{ + return resettable_is_in_reset(OBJECT(bus)); +} + +static ResettableState *bus_get_reset_state(Object *obj) +{ + BusState *bus = BUS(obj); + return &bus->reset; +} + +static void bus_reset_child_foreach(Object *obj, ResettableChildCallback cb, + void *opaque, ResetType type) +{ + BusState *bus = BUS(obj); + BusChild *kid; + + QTAILQ_FOREACH(kid, &bus->children, sibling) { + cb(OBJECT(kid->child), opaque, type); + } +} + static void qbus_realize(BusState *bus, DeviceState *parent, const char *name) { const char *typename = object_get_typename(OBJECT(bus)); @@ -XXX,XX +XXX,XX @@ static char *default_bus_get_fw_dev_path(DeviceState *dev) return g_strdup(object_get_typename(OBJECT(dev))); } +/** + * bus_phases_reset: + * Transition reset method for buses to allow moving + * smoothly from legacy reset method to multi-phases + */ +static void bus_phases_reset(BusState *bus) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(bus); + + if (rc->phases.enter) { + rc->phases.enter(OBJECT(bus), RESET_TYPE_COLD); + } + if (rc->phases.hold) { + rc->phases.hold(OBJECT(bus)); + } + if (rc->phases.exit) { + rc->phases.exit(OBJECT(bus)); + } +} + +static void bus_transitional_reset(Object *obj) +{ + BusClass *bc = BUS_GET_CLASS(obj); + + /* + * This will call either @bus_phases_reset (for multi-phases transitioned + * buses) or a bus's specific method for not-yet transitioned buses. + * In both case, it does not reset children. + */ + if (bc->reset) { + bc->reset(BUS(obj)); + } +} + +/** + * bus_get_transitional_reset: + * check if the bus's class is ready for multi-phase + */ +static ResettableTrFunction bus_get_transitional_reset(Object *obj) +{ + BusClass *dc = BUS_GET_CLASS(obj); + if (dc->reset != bus_phases_reset) { + /* + * dc->reset has been overridden by a subclass, + * the bus is not ready for multi phase yet. + */ + return bus_transitional_reset; + } + return NULL; +} + static void bus_class_init(ObjectClass *class, void *data) { BusClass *bc = BUS_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); class->unparent = bus_unparent; bc->get_fw_dev_path = default_bus_get_fw_dev_path; + + rc->get_state = bus_get_reset_state; + rc->child_foreach = bus_reset_child_foreach; + + /* + * @bus_phases_reset is put as the default reset method below, allowing + * to do the multi-phase transition from base classes to leaf classes. It + * allows a legacy-reset Bus class to extend a multi-phases-reset + * Bus class for the following reason: + * + If a base class B has been moved to multi-phase, then it does not + * override this default reset method and may have defined phase methods. + * + A child class C (extending class B) which uses + * bus_class_set_parent_reset() (or similar means) to override the + * reset method will still work as expected. @bus_phases_reset function + * will be registered as the parent reset method and effectively call + * parent reset phases. + */ + bc->reset = bus_phases_reset; + rc->get_transitional_function = bus_get_transitional_reset; } static void qbus_finalize(Object *obj) @@ -XXX,XX +XXX,XX @@ static const TypeInfo bus_info = { .instance_init = qbus_initfn, .instance_finalize = qbus_finalize, .class_init = bus_class_init, + .interfaces = (InterfaceInfo[]) { + { TYPE_RESETTABLE_INTERFACE }, + { } + }, }; static void bus_register_types(void) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ void qbus_reset_all_fn(void *opaque) qbus_reset_all(bus); } +bool device_is_in_reset(DeviceState *dev) +{ + return resettable_is_in_reset(OBJECT(dev)); +} + +static ResettableState *device_get_reset_state(Object *obj) +{ + DeviceState *dev = DEVICE(obj); + return &dev->reset; +} + +static void device_reset_child_foreach(Object *obj, ResettableChildCallback cb, + void *opaque, ResetType type) +{ + DeviceState *dev = DEVICE(obj); + BusState *bus; + + QLIST_FOREACH(bus, &dev->child_bus, sibling) { + cb(OBJECT(bus), opaque, type); + } +} + /* can be used as ->unplug() callback for the simple cases */ void qdev_simple_device_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ device_vmstate_if_get_id(VMStateIf *obj) return qdev_get_dev_path(dev); } +/** + * device_phases_reset: + * Transition reset method for devices to allow moving + * smoothly from legacy reset method to multi-phases + */ +static void device_phases_reset(DeviceState *dev) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(dev); + + if (rc->phases.enter) { + rc->phases.enter(OBJECT(dev), RESET_TYPE_COLD); + } + if (rc->phases.hold) { + rc->phases.hold(OBJECT(dev)); + } + if (rc->phases.exit) { + rc->phases.exit(OBJECT(dev)); + } +} + +static void device_transitional_reset(Object *obj) +{ + DeviceClass *dc = DEVICE_GET_CLASS(obj); + + /* + * This will call either @device_phases_reset (for multi-phases transitioned + * devices) or a device's specific method for not-yet transitioned devices. + * In both case, it does not reset children. + */ + if (dc->reset) { + dc->reset(DEVICE(obj)); + } +} + +/** + * device_get_transitional_reset: + * check if the device's class is ready for multi-phase + */ +static ResettableTrFunction device_get_transitional_reset(Object *obj) +{ + DeviceClass *dc = DEVICE_GET_CLASS(obj); + if (dc->reset != device_phases_reset) { + /* + * dc->reset has been overridden by a subclass, + * the device is not ready for multi phase yet. + */ + return device_transitional_reset; + } + return NULL; +} + static void device_class_init(ObjectClass *class, void *data) { DeviceClass *dc = DEVICE_CLASS(class); VMStateIfClass *vc = VMSTATE_IF_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); class->unparent = device_unparent; @@ -XXX,XX +XXX,XX @@ static void device_class_init(ObjectClass *class, void *data) dc->hotpluggable = true; dc->user_creatable = true; vc->get_id = device_vmstate_if_get_id; + rc->get_state = device_get_reset_state; + rc->child_foreach = device_reset_child_foreach; + + /* + * @device_phases_reset is put as the default reset method below, allowing + * to do the multi-phase transition from base classes to leaf classes. It + * allows a legacy-reset Device class to extend a multi-phases-reset + * Device class for the following reason: + * + If a base class B has been moved to multi-phase, then it does not + * override this default reset method and may have defined phase methods. + * + A child class C (extending class B) which uses + * device_class_set_parent_reset() (or similar means) to override the + * reset method will still work as expected. @device_phases_reset function + * will be registered as the parent reset method and effectively call + * parent reset phases. + */ + dc->reset = device_phases_reset; + rc->get_transitional_function = device_get_transitional_reset; object_class_property_add_bool(class, "realized", device_get_realized, device_set_realized, @@ -XXX,XX +XXX,XX @@ static const TypeInfo device_type_info = { .class_size = sizeof(DeviceClass), .interfaces = (InterfaceInfo[]) { { TYPE_VMSTATE_IF }, + { TYPE_RESETTABLE_INTERFACE }, { } } }; -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Add a function resettable_change_parent() to do the required plumbing when changing the parent a of Resettable object. We need to make sure that the reset state of the object remains coherent with the reset state of the new parent. We make the 2 following hypothesis: + when an object is put in a parent under reset, the object goes in reset. + when an object is removed from a parent under reset, the object leaves reset. The added function avoids any glitch if both old and new parent are already in reset. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-6-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/resettable.h | 16 +++++++++++ hw/core/resettable.c | 62 +++++++++++++++++++++++++++++++++++++++-- hw/core/trace-events | 1 + 3 files changed, 77 insertions(+), 2 deletions(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ void resettable_release_reset(Object *obj, ResetType type); */ bool resettable_is_in_reset(Object *obj); +/** + * resettable_change_parent: + * Indicate that the parent of Ressettable @obj is changing from @oldp to @newp. + * All 3 objects must implement resettable interface. @oldp or @newp may be + * NULL. + * + * This function will adapt the reset state of @obj so that it is coherent + * with the reset state of @newp. It may trigger @resettable_assert_reset() + * or @resettable_release_reset(). It will do such things only if the reset + * state of @newp and @oldp are different. + * + * When using this function during reset, it must only be called during + * a hold phase method. Calling this during enter or exit phase is an error. + */ +void resettable_change_parent(Object *obj, Object *newp, Object *oldp); + /** * resettable_class_set_parent_phases: * diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type); * enter_phase_in_progress: * True if we are currently in reset enter phase. * - * Note: This flag is only used to guarantee (using asserts) that the reset - * API is used correctly. We can use a global variable because we rely on the + * exit_phase_in_progress: + * count the number of exit phase we are in. + * + * Note: These flags are only used to guarantee (using asserts) that the reset + * API is used correctly. We can use global variables because we rely on the * iothread mutex to ensure only one reset operation is in a progress at a * given time. */ static bool enter_phase_in_progress; +static unsigned exit_phase_in_progress; void resettable_reset(Object *obj, ResetType type) { @@ -XXX,XX +XXX,XX @@ void resettable_release_reset(Object *obj, ResetType type) trace_resettable_reset_release_begin(obj, type); assert(!enter_phase_in_progress); + exit_phase_in_progress += 1; resettable_phase_exit(obj, NULL, type); + exit_phase_in_progress -= 1; trace_resettable_reset_release_end(obj); } @@ -XXX,XX +XXX,XX @@ static void resettable_phase_exit(Object *obj, void *opaque, ResetType type) trace_resettable_phase_exit_end(obj, obj_typename, s->count); } +/* + * resettable_get_count: + * Get the count of the Resettable object @obj. Return 0 if @obj is NULL. + */ +static unsigned resettable_get_count(Object *obj) +{ + if (obj) { + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + return rc->get_state(obj)->count; + } + return 0; +} + +void resettable_change_parent(Object *obj, Object *newp, Object *oldp) +{ + ResettableClass *rc = RESETTABLE_GET_CLASS(obj); + ResettableState *s = rc->get_state(obj); + unsigned newp_count = resettable_get_count(newp); + unsigned oldp_count = resettable_get_count(oldp); + + /* + * Ensure we do not change parent when in enter or exit phase. + * During these phases, the reset subtree being updated is partly in reset + * and partly not in reset (it depends on the actual position in + * resettable_child_foreach()s). We are not able to tell in which part is a + * leaving or arriving device. Thus we cannot set the reset count of the + * moving device to the proper value. + */ + assert(!enter_phase_in_progress && !exit_phase_in_progress); + trace_resettable_change_parent(obj, oldp, oldp_count, newp, newp_count); + + /* + * At most one of the two 'for' loops will be executed below + * in order to cope with the difference between the two counts. + */ + /* if newp is more reset than oldp */ + for (unsigned i = oldp_count; i < newp_count; i++) { + resettable_assert_reset(obj, RESET_TYPE_COLD); + } + /* + * if obj is leaving a bus under reset, we need to ensure + * hold phase is not pending. + */ + if (oldp_count && s->hold_phase_pending) { + resettable_phase_hold(obj, NULL, RESET_TYPE_COLD); + } + /* if oldp is more reset than newp */ + for (unsigned i = newp_count; i < oldp_count; i++) { + resettable_release_reset(obj, RESET_TYPE_COLD); + } +} + void resettable_class_set_parent_phases(ResettableClass *rc, ResettableEnterPhase enter, ResettableHoldPhase hold, diff --git a/hw/core/trace-events b/hw/core/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/core/trace-events +++ b/hw/core/trace-events @@ -XXX,XX +XXX,XX @@ resettable_reset_assert_begin(void *obj, int cold) "obj=%p cold=%d" resettable_reset_assert_end(void *obj) "obj=%p" resettable_reset_release_begin(void *obj, int cold) "obj=%p cold=%d" resettable_reset_release_end(void *obj) "obj=%p" +resettable_change_parent(void *obj, void *o, unsigned oc, void *n, unsigned nc) "obj=%p from=%p(%d) to=%p(%d)" resettable_phase_enter_begin(void *obj, const char *objtype, unsigned count, int type) "obj=%p(%s) count=%d type=%d" resettable_phase_enter_exec(void *obj, const char *objtype, int type, int has_method) "obj=%p(%s) type=%d method=%d" resettable_phase_enter_end(void *obj, const char *objtype, unsigned count) "obj=%p(%s) count=%d" -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> In qdev_set_parent_bus(), when changing the parent bus of a realized device, if the source and destination buses are not in the same reset state, some adaptations are required. This patch adds needed call to resettable_change_parent() to make sure a device reset state stays coherent with its parent bus. The addition is a no-op if: 1. the device being parented is not realized. 2. the device is realized, but both buses are not under reset. Case 2 means that as long as qdev_set_parent_bus() is called during the machine realization procedure (which is before the machine reset so nothing is in reset), it is a no op. There are 52 call sites of qdev_set_parent_bus(). All but one fall into the no-op case: + 29 trivial calls related to virtio (in hw/{s390x,display,virtio}/ {vhost,virtio}-xxx.c) to set a vdev(or vgpu) composing device parent bus just before realizing the same vdev(vgpu). + hw/core/qdev.c: when creating a device in qdev_try_create() + hw/core/sysbus.c: when initializing a device in the sysbus + hw/i386/amd_iommu.c: before realizing AMDVIState/pci + hw/isa/piix4.c: before realizing PIIX4State/rtc + hw/misc/auxbus.c: when creating an AUXBus + hw/misc/auxbus.c: when creating an AUXBus child + hw/misc/macio/macio.c: when initializing a MACIOState child + hw/misc/macio/macio.c: before realizing NewWorldMacIOState/pmu + hw/misc/macio/macio.c: before realizing NewWorldMacIOState/cuda + hw/net/virtio-net.c: Used for migration when using the failover mechanism to migration a vfio-pci/net. It is a no-op because at this point the device is already on the bus. + hw/pci-host/designware.c: before realizing DesignwarePCIEHost/root + hw/pci-host/gpex.c: before realizing GPEXHost/root + hw/pci-host/prep.c: when initialiazing PREPPCIState/pci_dev + hw/pci-host/q35.c: before realizing Q35PCIHost/mch + hw/pci-host/versatile.c: when initializing PCIVPBState/pci_dev + hw/pci-host/xilinx-pcie.c: before realizing XilinxPCIEHost/root + hw/s390x/event-facility.c: when creating SCLPEventFacility/ TYPE_SCLP_QUIESCE + hw/s390x/event-facility.c: ditto with SCLPEventFacility/ TYPE_SCLP_CPU_HOTPLUG + hw/s390x/sclp.c: Not trivial because it is called on a SLCPDevice just after realizing it. Ok because at this point the destination bus (sysbus) is not in reset; the realize step is before the machine reset. + hw/sd/core.c: Not OK. Used in sdbus_reparent_card(). See below. + hw/ssi/ssi.c: Used to put spi slave on spi bus and connect the cs line in ssi_auto_connect_slave(). Ok because this function is only used in realize step in hw/ssi/aspeed_smc.ci, hw/ssi/imx_spi.c, hw/ssi/mss-spi.c, hw/ssi/xilinx_spi.c and hw/ssi/xilinx_spips.c. + hw/xen/xen-legacy-backend.c: when creating a XenLegacyDevice device + qdev-monitor.c: in device hotplug creation procedure before realize Note that this commit alone will have no effect, right now there is no use of resettable API to reset anything. So a bus will never be tagged as in-reset by this same API. The one place where side-effect will occurs is in hw/sd/core.c in sdbus_reparent_card(). This function is only used in the raspi machines, including during the sysbus reset procedure. This case will be carrefully handled when doing the multiple phase reset transition. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-7-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/core/qdev.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void bus_add_child(BusState *bus, DeviceState *child) void qdev_set_parent_bus(DeviceState *dev, BusState *bus) { - bool replugging = dev->parent_bus != NULL; + BusState *old_parent_bus = dev->parent_bus; - if (replugging) { + if (old_parent_bus) { trace_qdev_update_parent_bus(dev, object_get_typename(OBJECT(dev)), - dev->parent_bus, object_get_typename(OBJECT(dev->parent_bus)), + old_parent_bus, object_get_typename(OBJECT(old_parent_bus)), OBJECT(bus), object_get_typename(OBJECT(bus))); /* * Keep a reference to the device while it's not plugged into * any bus, to avoid it potentially evaporating when it is * dereffed in bus_remove_child(). + * Also keep the ref of the parent bus until the end, so that + * we can safely call resettable_change_parent() below. */ object_ref(OBJECT(dev)); bus_remove_child(dev->parent_bus, dev); - object_unref(OBJECT(dev->parent_bus)); } dev->parent_bus = bus; object_ref(OBJECT(bus)); bus_add_child(bus, dev); - if (replugging) { + if (dev->realized) { + resettable_change_parent(OBJECT(dev), OBJECT(bus), + OBJECT(old_parent_bus)); + } + if (old_parent_bus) { + object_unref(OBJECT(old_parent_bus)); object_unref(OBJECT(dev)); } } -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> This commit make use of the resettable API to reset the device being hotplugged when it is realized. Also it ensures it is put in a reset state coherent with the parent it is plugged into. Note that there is a difference in the reset. Instead of resetting only the hotplugged device, we reset also its subtree (switch to resettable API). This is not expected to be a problem because sub-buses are just realized too. If a hotplugged device has any sub-buses it is logical to reset them too at this point. The recently added should_be_hidden and PCI's partially_hotplugged mechanisms do not interfere with realize operation: + In the should_be_hidden use case, device creation is delayed. + The partially_hotplugged mechanism prevents a device to be unplugged and unrealized from qdev POV and unrealized. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-8-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/resettable.h | 11 +++++++++++ hw/core/qdev.c | 15 ++++++++++++++- 2 files changed, 25 insertions(+), 1 deletion(-) diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ struct ResettableState { bool exit_phase_in_progress; }; +/** + * resettable_state_clear: + * Clear the state. It puts the state to the initial (zeroed) state required + * to reuse an object. Typically used in realize step of base classes + * implementing the interface. + */ +static inline void resettable_state_clear(ResettableState *state) +{ + memset(state, 0, sizeof(ResettableState)); +} + /** * resettable_reset: * Trigger a reset on an object @obj of type @type. @obj must implement diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } + /* + * Clear the reset state, in case the object was previously unrealized + * with a dirty state. + */ + resettable_state_clear(&dev->reset); + QLIST_FOREACH(bus, &dev->child_bus, sibling) { object_property_set_bool(OBJECT(bus), true, "realized", &local_err); @@ -XXX,XX +XXX,XX @@ static void device_set_realized(Object *obj, bool value, Error **errp) } } if (dev->hotplugged) { - device_legacy_reset(dev); + /* + * Reset the device, as well as its subtree which, at this point, + * should be realized too. + */ + resettable_assert_reset(OBJECT(dev), RESET_TYPE_COLD); + resettable_change_parent(OBJECT(dev), OBJECT(dev->parent_bus), + NULL); + resettable_release_reset(OBJECT(dev), RESET_TYPE_COLD); } dev->pending_deleted_event = false; -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Deprecate device_legacy_reset(), qdev_reset_all() and qbus_reset_all() to be replaced by new functions device_cold_reset() and bus_cold_reset() which uses resettable API. Also introduce resettable_cold_reset_fn() which may be used as a replacement for qdev_reset_all_fn and qbus_reset_all_fn(). Following patches will be needed to look at legacy reset call sites and switch to resettable api. The legacy functions will be removed when unused. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-9-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/qdev-core.h | 27 +++++++++++++++++++++++++++ include/hw/resettable.h | 9 +++++++++ hw/core/bus.c | 5 +++++ hw/core/qdev.c | 5 +++++ hw/core/resettable.c | 5 +++++ 5 files changed, 51 insertions(+) diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/qdev-core.h +++ b/include/hw/qdev-core.h @@ -XXX,XX +XXX,XX @@ int qdev_walk_children(DeviceState *dev, qdev_walkerfn *post_devfn, qbus_walkerfn *post_busfn, void *opaque); +/** + * @qdev_reset_all: + * Reset @dev. See @qbus_reset_all() for more details. + * + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use device_cold_reset() now. + */ void qdev_reset_all(DeviceState *dev); void qdev_reset_all_fn(void *opaque); @@ -XXX,XX +XXX,XX @@ void qdev_reset_all_fn(void *opaque); * hard reset means that qbus_reset_all will reset all state of the device. * For PCI devices, for example, this will include the base address registers * or configuration space. + * + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use bus_cold_reset() now. */ void qbus_reset_all(BusState *bus); void qbus_reset_all_fn(void *opaque); +/** + * device_cold_reset: + * Reset device @dev and perform a recursive processing using the resettable + * interface. It triggers a RESET_TYPE_COLD. + */ +void device_cold_reset(DeviceState *dev); + +/** + * bus_cold_reset: + * + * Reset bus @bus and perform a recursive processing using the resettable + * interface. It triggers a RESET_TYPE_COLD. + */ +void bus_cold_reset(BusState *bus); + /** * device_is_in_reset: * Return true if the device @dev is currently being reset. @@ -XXX,XX +XXX,XX @@ void qdev_machine_init(void); * device_legacy_reset: * * Reset a single device (by calling the reset method). + * Note: This function is deprecated and will be removed when it becomes unused. + * Please use device_cold_reset() now. */ void device_legacy_reset(DeviceState *dev); diff --git a/include/hw/resettable.h b/include/hw/resettable.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/resettable.h +++ b/include/hw/resettable.h @@ -XXX,XX +XXX,XX @@ bool resettable_is_in_reset(Object *obj); */ void resettable_change_parent(Object *obj, Object *newp, Object *oldp); +/** + * resettable_cold_reset_fn: + * Helper to call resettable_reset((Object *) opaque, RESET_TYPE_COLD). + * + * This function is typically useful to register a reset handler with + * qemu_register_reset. + */ +void resettable_cold_reset_fn(void *opaque); + /** * resettable_class_set_parent_phases: * diff --git a/hw/core/bus.c b/hw/core/bus.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/bus.c +++ b/hw/core/bus.c @@ -XXX,XX +XXX,XX @@ int qbus_walk_children(BusState *bus, return 0; } +void bus_cold_reset(BusState *bus) +{ + resettable_reset(OBJECT(bus), RESET_TYPE_COLD); +} + bool bus_is_in_reset(BusState *bus) { return resettable_is_in_reset(OBJECT(bus)); diff --git a/hw/core/qdev.c b/hw/core/qdev.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/qdev.c +++ b/hw/core/qdev.c @@ -XXX,XX +XXX,XX @@ void qbus_reset_all_fn(void *opaque) qbus_reset_all(bus); } +void device_cold_reset(DeviceState *dev) +{ + resettable_reset(OBJECT(dev), RESET_TYPE_COLD); +} + bool device_is_in_reset(DeviceState *dev) { return resettable_is_in_reset(OBJECT(dev)); diff --git a/hw/core/resettable.c b/hw/core/resettable.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/resettable.c +++ b/hw/core/resettable.c @@ -XXX,XX +XXX,XX @@ void resettable_change_parent(Object *obj, Object *newp, Object *oldp) } } +void resettable_cold_reset_fn(void *opaque) +{ + resettable_reset((Object *) opaque, RESET_TYPE_COLD); +} + void resettable_class_set_parent_phases(ResettableClass *rc, ResettableEnterPhase enter, ResettableHoldPhase hold, -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200123132823.1117486-10-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/devel/index.rst | 1 + docs/devel/reset.rst | 289 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 290 insertions(+) create mode 100644 docs/devel/reset.rst diff --git a/docs/devel/index.rst b/docs/devel/index.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/devel/index.rst +++ b/docs/devel/index.rst @@ -XXX,XX +XXX,XX @@ Contents: tcg tcg-plugins bitops + reset diff --git a/docs/devel/reset.rst b/docs/devel/reset.rst new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/docs/devel/reset.rst @@ -XXX,XX +XXX,XX @@ + +======================================= +Reset in QEMU: the Resettable interface +======================================= + +The reset of qemu objects is handled using the resettable interface declared +in ``include/hw/resettable.h``. + +This interface allows objects to be grouped (on a tree basis); so that the +whole group can be reset consistently. Each individual member object does not +have to care about others; in particular, problems of order (which object is +reset first) are addressed. + +As of now DeviceClass and BusClass implement this interface. + + +Triggering reset +---------------- + +This section documents the APIs which "users" of a resettable object should use +to control it. All resettable control functions must be called while holding +the iothread lock. + +You can apply a reset to an object using ``resettable_assert_reset()``. You need +to call ``resettable_release_reset()`` to release the object from reset. To +instantly reset an object, without keeping it in reset state, just call +``resettable_reset()``. These functions take two parameters: a pointer to the +object to reset and a reset type. + +Several types of reset will be supported. For now only cold reset is defined; +others may be added later. The Resettable interface handles reset types with an +enum: + +``RESET_TYPE_COLD`` + Cold reset is supported by every resettable object. In QEMU, it means we reset + to the initial state corresponding to the start of QEMU; this might differ + from what is a real hardware cold reset. It differs from other resets (like + warm or bus resets) which may keep certain parts untouched. + +Calling ``resettable_reset()`` is equivalent to calling +``resettable_assert_reset()`` then ``resettable_release_reset()``. It is +possible to interleave multiple calls to these three functions. There may +be several reset sources/controllers of a given object. The interface handles +everything and the different reset controllers do not need to know anything +about each others. The object will leave reset state only when each other +controllers end their reset operation. This point is handled internally by +maintaining a count of in-progress resets; it is crucial to call +``resettable_release_reset()`` one time and only one time per +``resettable_assert_reset()`` call. + +For now migration of a device or bus in reset is not supported. Care must be +taken not to delay ``resettable_release_reset()`` after its +``resettable_assert_reset()`` counterpart. + +Note that, since resettable is an interface, the API takes a simple Object as +parameter. Still, it is a programming error to call a resettable function on a +non-resettable object and it will trigger a run time assert error. Since most +calls to resettable interface are done through base class functions, such an +error is not likely to happen. + +For Devices and Buses, the following helper functions exist: + +- ``device_cold_reset()`` +- ``bus_cold_reset()`` + +These are simple wrappers around resettable_reset() function; they only cast the +Device or Bus into an Object and pass the cold reset type. When possible +prefer to use these functions instead of ``resettable_reset()``. + +Device and bus functions co-exist because there can be semantic differences +between resetting a bus and resetting the controller bridge which owns it. +For example, consider a SCSI controller. Resetting the controller puts all +its registers back to what reset state was as well as reset everything on the +SCSI bus, whereas resetting just the SCSI bus only resets everything that's on +it but not the controller. + + +Multi-phase mechanism +--------------------- + +This section documents the internals of the resettable interface. + +The resettable interface uses a multi-phase system to relieve objects and +machines from reset ordering problems. To address this, the reset operation +of an object is split into three well defined phases. + +When resetting several objects (for example the whole machine at simulation +startup), all first phases of all objects are executed, then all second phases +and then all third phases. + +The three phases are: + +1. The **enter** phase is executed when the object enters reset. It resets only + local state of the object; it must not do anything that has a side-effect + on other objects, such as raising or lowering a qemu_irq line or reading or + writing guest memory. + +2. The **hold** phase is executed for entry into reset, once every object in the + group which is being reset has had its *enter* phase executed. At this point + devices can do actions that affect other objects. + +3. The **exit** phase is executed when the object leaves the reset state. + Actions affecting other objects are permitted. + +As said in previous section, the interface maintains a count of reset. This +count is used to ensure phases are executed only when required. *enter* and +*hold* phases are executed only when asserting reset for the first time +(if an object is already in reset state when calling +``resettable_assert_reset()`` or ``resettable_reset()``, they are not +executed). +The *exit* phase is executed only when the last reset operation ends. Therefore +the object does not need to care how many of reset controllers it has and how +many of them have started a reset. + + +Handling reset in a resettable object +------------------------------------- + +This section documents the APIs that an implementation of a resettable object +must provide and what functions it has access to. It is intended for people +who want to implement or convert a class which has the resettable interface; +for example when specializing an existing device or bus. + +Methods to implement +.................... + +Three methods should be defined or left empty. Each method corresponds to a +phase of the reset; they are name ``phases.enter()``, ``phases.hold()`` and +``phases.exit()``. They all take the object as parameter. The *enter* method +also take the reset type as second parameter. + +When extending an existing class, these methods may need to be extended too. +The ``resettable_class_set_parent_phases()`` class function may be used to +backup parent class methods. + +Here follows an example to implement reset for a Device which sets an IO while +in reset. + +:: + + static void mydev_reset_enter(Object *obj, ResetType type) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class enter phase */ + if (myclass->parent_phases.enter) { + myclass->parent_phases.enter(obj, type); + } + /* initialize local state only */ + mydev->var = 0; + } + + static void mydev_reset_hold(Object *obj) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class hold phase */ + if (myclass->parent_phases.hold) { + myclass->parent_phases.hold(obj); + } + /* set an IO */ + qemu_set_irq(mydev->irq, 1); + } + + static void mydev_reset_exit(Object *obj) + { + MyDevClass *myclass = MYDEV_GET_CLASS(obj); + MyDevState *mydev = MYDEV(obj); + /* call parent class exit phase */ + if (myclass->parent_phases.exit) { + myclass->parent_phases.exit(obj); + } + /* clear an IO */ + qemu_set_irq(mydev->irq, 0); + } + + typedef struct MyDevClass { + MyParentClass parent_class; + /* to store eventual parent reset methods */ + ResettablePhases parent_phases; + } MyDevClass; + + static void mydev_class_init(ObjectClass *class, void *data) + { + MyDevClass *myclass = MYDEV_CLASS(class); + ResettableClass *rc = RESETTABLE_CLASS(class); + resettable_class_set_parent_reset_phases(rc, + mydev_reset_enter, + mydev_reset_hold, + mydev_reset_exit, + &myclass->parent_phases); + } + +In the above example, we override all three phases. It is possible to override +only some of them by passing NULL instead of a function pointer to +``resettable_class_set_parent_reset_phases()``. For example, the following will +only override the *enter* phase and leave *hold* and *exit* untouched:: + + resettable_class_set_parent_reset_phases(rc, mydev_reset_enter, + NULL, NULL, + &myclass->parent_phases); + +This is equivalent to providing a trivial implementation of the hold and exit +phases which does nothing but call the parent class's implementation of the +phase. + +Polling the reset state +....................... + +Resettable interface provides the ``resettable_is_in_reset()`` function. +This function returns true if the object parameter is currently under reset. + +An object is under reset from the beginning of the *init* phase to the end of +the *exit* phase. During all three phases, the function will return that the +object is in reset. + +This function may be used if the object behavior has to be adapted +while in reset state. For example if a device has an irq input, +it will probably need to ignore it while in reset; then it can for +example check the reset state at the beginning of the irq callback. + +Note that until migration of the reset state is supported, an object +should not be left in reset. So apart from being currently executing +one of the reset phases, the only cases when this function will return +true is if an external interaction (like changing an io) is made during +*hold* or *exit* phase of another object in the same reset group. + +Helpers ``device_is_in_reset()`` and ``bus_is_in_reset()`` are also provided +for devices and buses and should be preferred. + + +Base class handling of reset +---------------------------- + +This section documents parts of the reset mechanism that you only need to know +about if you are extending it to work with a new base class other than +DeviceClass or BusClass, or maintaining the existing code in those classes. Most +people can ignore it. + +Methods to implement +.................... + +There are two other methods that need to exist in a class implementing the +interface: ``get_state()`` and ``child_foreach()``. + +``get_state()`` is simple. *resettable* is an interface and, as a consequence, +does not have any class state structure. But in order to factorize the code, we +need one. This method must return a pointer to ``ResettableState`` structure. +The structure must be allocated by the base class; preferably it should be +located inside the object instance structure. + +``child_foreach()`` is more complex. It should execute the given callback on +every reset child of the given resettable object. All children must be +resettable too. Additional parameters (a reset type and an opaque pointer) must +be passed to the callback too. + +In ``DeviceClass`` and ``BusClass`` the ``ResettableState`` is located +``DeviceState`` and ``BusState`` structure. ``child_foreach()`` is implemented +to follow the bus hierarchy; for a bus, it calls the function on every child +device; for a device, it calls the function on every bus child. When we reset +the main system bus, we reset the whole machine bus tree. + +Changing a resettable parent +............................ + +One thing which should be taken care of by the base class is handling reset +hierarchy changes. + +The reset hierarchy is supposed to be static and built during machine creation. +But there are actually some exceptions. To cope with this, the resettable API +provides ``resettable_change_parent()``. This function allows to set, update or +remove the parent of a resettable object after machine creation is done. As +parameters, it takes the object being moved, the old parent if any and the new +parent if any. + +This function can be used at any time when not in a reset operation. During +a reset operation it must be used only in *hold* phase. Using it in *enter* or +*exit* phase is an error. +Also it should not be used during machine creation, although it is harmless to +do so: the function is a no-op as long as old and new parent are NULL or not +in reset. + +There is currently 2 cases where this function is used: + +1. *device hotplug*; it means a new device is introduced on a live bus. + +2. *hot bus change*; it means an existing live device is added, moved or + removed in the bus hierarchy. At the moment, it occurs only in the raspi + machines for changing the sdbus used by sd card. -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Replace deprecated qbus_reset_all by resettable_cold_reset_fn for the sysbus reset registration. Apart for the raspi machines, this does not impact the behavior because: + at this point resettable just calls the old reset methods of devices and buses in the same order as qdev/qbus. + resettable handlers registered with qemu_register_reset are serialized; there is no interleaving. + eventual explicit calls to legacy reset API (device_reset or qdev/qbus_reset) inside this reset handler will not be masked out by resettable mechanism; they do not go through resettable api. For the raspi machines, during the sysbus reset the sd-card is not reset twice anymore but only once. This is a consequence of switching both sysbus reset and changing parent to resettable; it detects the second reset is not needed. This has no impact on the state after reset; the sd-card reset method only reset local state and query information from the block backend. The raspi reset change can be observed by using the following command (reset will occurs, then do Ctrl-C to end qemu; no firmware is given here). qemu-system-aarch64 -M raspi3 \ -trace resettable_phase_hold_exec \ -trace qdev_update_parent_bus \ -trace resettable_change_parent \ -trace qdev_reset -trace qbus_reset Before the patch, the qdev/qbus_reset traces show when reset method are called. After the patch, the resettable_phase_hold_exec show when reset method are called. The traced reset order of the raspi3 is listed below. I've added empty lines and the tree structure. +->bcm2835-peripherals reset | | +->sd-card reset | +->sd-bus reset +->bcm2835_gpio reset | -> dev_update_parent_bus (move the sd-card on the sdhci-bus) | -> resettable_change_parent | +->bcm2835-dma reset | | +->bcm2835-sdhost-bus reset +->bcm2835-sdhost reset | | +->sd-card (reset ONLY BEFORE BEFORE THE PATCH) | +->sdhci-bus reset +->generic-sdhci reset | +->bcm2835-rng reset +->bcm2835-property reset +->bcm2835-fb reset +->bcm2835-mbox reset +->bcm2835-aux reset +->pl011 reset +->bcm2835-ic reset +->bcm2836-control reset System reset In both case, the sd-card is reset (being on bcm2835_gpio/sd-bus) then moved to generic-sdhci/sdhci-bus by the bcm2835_gpio reset method. Before the patch, it is then reset again being part of generic-sdhci/sdhci-bus. After the patch, it considered again for reset but its reset method is not called because it is already flagged as reset. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200123132823.1117486-11-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- vl.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/vl.c b/vl.c index XXXXXXX..XXXXXXX 100644 --- a/vl.c +++ b/vl.c @@ -XXX,XX +XXX,XX @@ int main(int argc, char **argv, char **envp) /* TODO: once all bus devices are qdevified, this should be done * when bus is created by qdev.c */ - qemu_register_reset(qbus_reset_all_fn, sysbus_get_default()); + /* + * TODO: If we had a main 'reset container' that the whole system + * lived in, we could reset that using the multi-phase reset + * APIs. For the moment, we just reset the sysbus, which will cause + * all devices hanging off it (and all their child buses, recursively) + * to be reset. Note that this will *not* reset any Device objects + * which are not attached to some part of the qbus tree! + */ + qemu_register_reset(resettable_cold_reset_fn, sysbus_get_default()); qemu_run_machine_init_done_notifiers(); if (rom_check_and_register_reset() != 0) { -- 2.20.1 From: Damien Hedde <damien.hedde@greensocs.com> Replace deprecated qdev_reset_all by resettable_cold_reset_fn for the ipl registration in the main reset handlers. This does not impact the behavior for the following reasons: + at this point resettable just call the old reset methods of devices and buses in the same order than qdev/qbus. + resettable handlers registered with qemu_register_reset are serialized; there is no interleaving. + eventual explicit calls to legacy reset API (device_reset or qdev/qbus_reset) inside this reset handler will not be masked out by resettable mechanism; they do not go through resettable api. Signed-off-by: Damien Hedde <damien.hedde@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200123132823.1117486-12-damien.hedde@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/s390x/ipl.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c index XXXXXXX..XXXXXXX 100644 --- a/hw/s390x/ipl.c +++ b/hw/s390x/ipl.c @@ -XXX,XX +XXX,XX @@ static void s390_ipl_realize(DeviceState *dev, Error **errp) */ ipl->compat_start_addr = ipl->start_addr; ipl->compat_bios_start_addr = ipl->bios_start_addr; - qemu_register_reset(qdev_reset_all_fn, dev); + /* + * Because this Device is not on any bus in the qbus tree (it is + * not a sysbus device and it's not on some other bus like a PCI + * bus) it will not be automatically reset by the 'reset the + * sysbus' hook registered by vl.c like most devices. So we must + * manually register a reset hook for it. + * TODO: there should be a better way to do this. + */ + qemu_register_reset(resettable_cold_reset_fn, dev); error: error_propagate(errp, err); } -- 2.20.1 From: Zenghui Yu <yuzenghui@huawei.com> If LPIs are disabled, KVM will just ignore the GICR_PENDBASER.PTZ bit when restoring GICR_CTLR. Setting PTZ here makes littlt sense in "reduce GIC initialization time". And what's worse, PTZ is generally programmed by guest to indicate to the Redistributor whether the LPI Pending table is zero when enabling LPIs. If migration is triggered when the PTZ has just been cleared by guest (and before enabling LPIs), we will see PTZ==1 on the destination side, which is not as expected. Let's just drop this hackish userspace behavior. Also take this chance to refine the comment a bit. Fixes: 367b9f527bec ("hw/intc/arm_gicv3_kvm: Implement get/put functions") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Message-id: 20200119133051.642-1-yuzenghui@huawei.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/arm_gicv3_kvm.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/arm_gicv3_kvm.c +++ b/hw/intc/arm_gicv3_kvm.c @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_put(GICv3State *s) kvm_gicd_access(s, GICD_CTLR, &reg, true); if (redist_typer & GICR_TYPER_PLPIS) { - /* Set base addresses before LPIs are enabled by GICR_CTLR write */ + /* + * Restore base addresses before LPIs are potentially enabled by + * GICR_CTLR write + */ for (ncpu = 0; ncpu < s->num_cpu; ncpu++) { GICv3CPUState *c = &s->cpu[ncpu]; @@ -XXX,XX +XXX,XX @@ static void kvm_arm_gicv3_put(GICv3State *s) kvm_gicr_access(s, GICR_PROPBASER + 4, ncpu, &regh, true); reg64 = c->gicr_pendbaser; - if (!(c->gicr_ctlr & GICR_CTLR_ENABLE_LPIS)) { - /* Setting PTZ is advised if LPIs are disabled, to reduce - * GIC initialization time. - */ - reg64 |= GICR_PENDBASER_PTZ; - } regl = (uint32_t)reg64; kvm_gicr_access(s, GICR_PENDBASER, ncpu, &regl, true); regh = (uint32_t)(reg64 >> 32); -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-2-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm_arm.h | 46 ++++++++++++++++++++++++++------------------ 1 file changed, 27 insertions(+), 19 deletions(-) diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ int kvm_arm_vcpu_init(CPUState *cs); /** - * kvm_arm_vcpu_finalize + * kvm_arm_vcpu_finalize: * @cs: CPUState - * @feature: int + * @feature: feature to finalize * * Finalizes the configuration of the specified VCPU feature by * invoking the KVM_ARM_VCPU_FINALIZE ioctl. Features requiring @@ -XXX,XX +XXX,XX @@ void kvm_arm_register_device(MemoryRegion *mr, uint64_t devid, uint64_t group, int kvm_arm_init_cpreg_list(ARMCPU *cpu); /** - * kvm_arm_reg_syncs_via_cpreg_list - * regidx: KVM register index + * kvm_arm_reg_syncs_via_cpreg_list: + * @regidx: KVM register index * * Return true if this KVM register should be synchronized via the * cpreg list of arbitrary system registers, false if it is synchronized @@ -XXX,XX +XXX,XX @@ int kvm_arm_init_cpreg_list(ARMCPU *cpu); bool kvm_arm_reg_syncs_via_cpreg_list(uint64_t regidx); /** - * kvm_arm_cpreg_level - * regidx: KVM register index + * kvm_arm_cpreg_level: + * @regidx: KVM register index * * Return the level of this coprocessor/system register. Return value is * either KVM_PUT_RUNTIME_STATE, KVM_PUT_RESET_STATE, or KVM_PUT_FULL_STATE. @@ -XXX,XX +XXX,XX @@ void kvm_arm_init_serror_injection(CPUState *cs); * @cpu: ARMCPU * * Get VCPU related state from kvm. + * + * Returns: 0 if success else < 0 error code */ int kvm_get_vcpu_events(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ int kvm_get_vcpu_events(ARMCPU *cpu); * @cpu: ARMCPU * * Put VCPU related state to kvm. + * + * Returns: 0 if success else < 0 error code */ int kvm_put_vcpu_events(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ typedef struct ARMHostCPUFeatures { /** * kvm_arm_get_host_cpu_features: - * @ahcc: ARMHostCPUClass to fill in + * @ahcf: ARMHostCPUClass to fill in * * Probe the capabilities of the host kernel's preferred CPU and fill * in the ARMHostCPUClass struct accordingly. + * + * Returns true on success and false otherwise. */ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf); @@ -XXX,XX +XXX,XX @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu); bool kvm_arm_aarch32_supported(CPUState *cs); /** - * bool kvm_arm_pmu_supported: + * kvm_arm_pmu_supported: * @cs: CPUState * * Returns: true if the KVM VCPU can enable its PMU @@ -XXX,XX +XXX,XX @@ bool kvm_arm_aarch32_supported(CPUState *cs); bool kvm_arm_pmu_supported(CPUState *cs); /** - * bool kvm_arm_sve_supported: + * kvm_arm_sve_supported: * @cs: CPUState * * Returns true if the KVM VCPU can enable SVE and false otherwise. @@ -XXX,XX +XXX,XX @@ bool kvm_arm_pmu_supported(CPUState *cs); bool kvm_arm_sve_supported(CPUState *cs); /** - * kvm_arm_get_max_vm_ipa_size - Returns the number of bits in the - * IPA address space supported by KVM - * + * kvm_arm_get_max_vm_ipa_size: * @ms: Machine state handle + * + * Returns the number of bits in the IPA address space supported by KVM */ int kvm_arm_get_max_vm_ipa_size(MachineState *ms); /** - * kvm_arm_sync_mpstate_to_kvm + * kvm_arm_sync_mpstate_to_kvm: * @cpu: ARMCPU * * If supported set the KVM MP_STATE based on QEMU's model. + * + * Returns 0 on success and -1 on failure. */ int kvm_arm_sync_mpstate_to_kvm(ARMCPU *cpu); /** - * kvm_arm_sync_mpstate_to_qemu + * kvm_arm_sync_mpstate_to_qemu: * @cpu: ARMCPU * * If supported get the MP_STATE from KVM and store in QEMU's model. + * + * Returns 0 on success and aborts on failure. */ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu); @@ -XXX,XX +XXX,XX @@ int kvm_arm_set_irq(int cpu, int irqtype, int irq, int level); static inline void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) { - /* This should never actually be called in the "not KVM" case, + /* + * This should never actually be called in the "not KVM" case, * but set up the fields to indicate an error anyway. */ cpu->kvm_target = QEMU_KVM_ARM_TARGET_NONE; @@ -XXX,XX +XXX,XX @@ bool kvm_arm_handle_debug(CPUState *cs, struct kvm_debug_exit_arch *debug_exit); * * Return: TRUE if any hardware breakpoints in use. */ - bool kvm_arm_hw_debug_active(CPUState *cs); /** * kvm_arm_copy_hw_debug_data: - * * @ptr: kvm_guest_debug_arch structure * * Copy the architecture specific debug registers into the * kvm_guest_debug ioctl structure. */ struct kvm_guest_debug_arch; - void kvm_arm_copy_hw_debug_data(struct kvm_guest_debug_arch *ptr); /** - * its_class_name + * its_class_name: * * Return the ITS class name to use depending on whether KVM acceleration * and KVM CAP_SIGNAL_MSI are supported -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-3-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 0) static void virt_machine_4_2_options(MachineClass *mc) { + virt_machine_5_0_options(mc); compat_props_add(mc->compat_props, hw_compat_4_2, hw_compat_4_2_len); } DEFINE_VIRT_MACHINE(4, 2) -- 2.20.1 From: Andrew Jones <drjones@redhat.com> Add the missing GENERIC_TIMER feature to kvm64 cpus. We don't currently use these registers when KVM is enabled, but it's probably best we add the feature flag for consistency and potential future use. There's also precedent, as we add the PMU feature flag to KVM enabled guests, even though we don't use those registers either. This change was originally posted as a hunk of a different, never merged patch from Bijan Mottahedeh. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200120101023.16030-4-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/kvm64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf) set_feature(&features, ARM_FEATURE_NEON); set_feature(&features, ARM_FEATURE_AARCH64); set_feature(&features, ARM_FEATURE_PMU); + set_feature(&features, ARM_FEATURE_GENERIC_TIMER); ahcf->features = features; -- 2.20.1 From: Andrew Jones <drjones@redhat.com> If we know what the default value should be then we can test for that as well as the feature existence. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20200120101023.16030-5-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- tests/qtest/arm-cpu-features.c | 37 +++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static bool resp_get_feature(QDict *resp, const char *feature) qobject_unref(_resp); \ }) +#define assert_feature(qts, cpu_type, feature, expected_value) \ +({ \ + QDict *_resp, *_props; \ + \ + _resp = do_query_no_props(qts, cpu_type); \ + g_assert(_resp); \ + g_assert(resp_has_props(_resp)); \ + _props = resp_get_props(_resp); \ + g_assert(qdict_get(_props, feature)); \ + g_assert(qdict_get_bool(_props, feature) == (expected_value)); \ + qobject_unref(_resp); \ +}) + +#define assert_has_feature_enabled(qts, cpu_type, feature) \ + assert_feature(qts, cpu_type, feature, true) + +#define assert_has_feature_disabled(qts, cpu_type, feature) \ + assert_feature(qts, cpu_type, feature, false) + static void assert_type_full(QTestState *qts) { const char *error; @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_error(qts, "host", "The CPU type 'host' requires KVM", NULL); /* Test expected feature presence/absence for some cpu types */ - assert_has_feature(qts, "max", "pmu"); - assert_has_feature(qts, "cortex-a15", "pmu"); + assert_has_feature_enabled(qts, "max", "pmu"); + assert_has_feature_enabled(qts, "cortex-a15", "pmu"); assert_has_not_feature(qts, "cortex-a15", "aarch64"); if (g_str_equal(qtest_get_arch(), "aarch64")) { - assert_has_feature(qts, "max", "aarch64"); - assert_has_feature(qts, "max", "sve"); - assert_has_feature(qts, "max", "sve128"); - assert_has_feature(qts, "cortex-a57", "pmu"); - assert_has_feature(qts, "cortex-a57", "aarch64"); + assert_has_feature_enabled(qts, "max", "aarch64"); + assert_has_feature_enabled(qts, "max", "sve"); + assert_has_feature_enabled(qts, "max", "sve128"); + assert_has_feature_enabled(qts, "cortex-a57", "pmu"); + assert_has_feature_enabled(qts, "cortex-a57", "aarch64"); sve_tests_default(qts, "max"); @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) QDict *resp; char *error; - assert_has_feature(qts, "host", "aarch64"); - assert_has_feature(qts, "host", "pmu"); + assert_has_feature_enabled(qts, "host", "aarch64"); + assert_has_feature_enabled(qts, "host", "pmu"); assert_error(qts, "cortex-a15", "We cannot guarantee the CPU type 'cortex-a15' works " -- 2.20.1 From: Andrew Jones <drjones@redhat.com> When a VM is stopped (such as when it's paused) guest virtual time should stop counting. Otherwise, when the VM is resumed it will experience time jumps and its kernel may report soft lockups. Not counting virtual time while the VM is stopped has the side effect of making the guest's time appear to lag when compared with real time, and even with time derived from the physical counter. For this reason, this change, which is enabled by default, comes with a KVM CPU feature allowing it to be disabled, restoring legacy behavior. This patch only provides the implementation of the virtual time adjustment. A subsequent patch will provide the CPU property allowing the change to be enabled and disabled. Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-6-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 7 ++++ target/arm/kvm_arm.h | 38 ++++++++++++++++++ target/arm/kvm.c | 92 ++++++++++++++++++++++++++++++++++++++++++++ target/arm/kvm32.c | 3 ++ target/arm/kvm64.c | 3 ++ target/arm/machine.c | 7 ++++ 6 files changed, 150 insertions(+) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ARMCPU { /* KVM init features for this CPU */ uint32_t kvm_init_features[7]; + /* KVM CPU state */ + + /* KVM virtual time adjustment */ + bool kvm_adjvtime; + bool kvm_vtime_dirty; + uint64_t kvm_vtime; + /* Uniprocessor system with MP extensions */ bool mp_is_up; diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level); */ bool write_kvmstate_to_list(ARMCPU *cpu); +/** + * kvm_arm_cpu_pre_save: + * @cpu: ARMCPU + * + * Called after write_kvmstate_to_list() from cpu_pre_save() to update + * the cpreg list with KVM CPU state. + */ +void kvm_arm_cpu_pre_save(ARMCPU *cpu); + +/** + * kvm_arm_cpu_post_load: + * @cpu: ARMCPU + * + * Called from cpu_post_load() to update KVM CPU state from the cpreg list. + */ +void kvm_arm_cpu_post_load(ARMCPU *cpu); + /** * kvm_arm_reset_vcpu: * @cpu: ARMCPU @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_kvm(ARMCPU *cpu); */ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu); +/** + * kvm_arm_get_virtual_time: + * @cs: CPUState + * + * Gets the VCPU's virtual counter and stores it in the KVM CPU state. + */ +void kvm_arm_get_virtual_time(CPUState *cs); + +/** + * kvm_arm_put_virtual_time: + * @cs: CPUState + * + * Sets the VCPU's virtual counter to the value stored in the KVM CPU state. + */ +void kvm_arm_put_virtual_time(CPUState *cs); + +void kvm_arm_vm_state_change(void *opaque, int running, RunState state); + int kvm_arm_vgic_probe(void); void kvm_arm_pmu_set_irq(CPUState *cs, int irq); @@ -XXX,XX +XXX,XX @@ static inline void kvm_arm_pmu_set_irq(CPUState *cs, int irq) {} static inline void kvm_arm_pmu_init(CPUState *cs) {} static inline void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map) {} + +static inline void kvm_arm_get_virtual_time(CPUState *cs) {} +static inline void kvm_arm_put_virtual_time(CPUState *cs) {} #endif static inline const char *gic_class_name(void) diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ static int compare_u64(const void *a, const void *b) return 0; } +/* + * cpreg_values are sorted in ascending order by KVM register ID + * (see kvm_arm_init_cpreg_list). This allows us to cheaply find + * the storage for a KVM register by ID with a binary search. + */ +static uint64_t *kvm_arm_get_cpreg_ptr(ARMCPU *cpu, uint64_t regidx) +{ + uint64_t *res; + + res = bsearch(&regidx, cpu->cpreg_indexes, cpu->cpreg_array_len, + sizeof(uint64_t), compare_u64); + assert(res); + + return &cpu->cpreg_values[res - cpu->cpreg_indexes]; +} + /* Initialize the ARMCPU cpreg list according to the kernel's * definition of what CPU registers it knows about (and throw away * the previous TCG-created cpreg list). @@ -XXX,XX +XXX,XX @@ bool write_list_to_kvmstate(ARMCPU *cpu, int level) return ok; } +void kvm_arm_cpu_pre_save(ARMCPU *cpu) +{ + /* KVM virtual time adjustment */ + if (cpu->kvm_vtime_dirty) { + *kvm_arm_get_cpreg_ptr(cpu, KVM_REG_ARM_TIMER_CNT) = cpu->kvm_vtime; + } +} + +void kvm_arm_cpu_post_load(ARMCPU *cpu) +{ + /* KVM virtual time adjustment */ + if (cpu->kvm_adjvtime) { + cpu->kvm_vtime = *kvm_arm_get_cpreg_ptr(cpu, KVM_REG_ARM_TIMER_CNT); + cpu->kvm_vtime_dirty = true; + } +} + void kvm_arm_reset_vcpu(ARMCPU *cpu) { int ret; @@ -XXX,XX +XXX,XX @@ int kvm_arm_sync_mpstate_to_qemu(ARMCPU *cpu) return 0; } +void kvm_arm_get_virtual_time(CPUState *cs) +{ + ARMCPU *cpu = ARM_CPU(cs); + struct kvm_one_reg reg = { + .id = KVM_REG_ARM_TIMER_CNT, + .addr = (uintptr_t)&cpu->kvm_vtime, + }; + int ret; + + if (cpu->kvm_vtime_dirty) { + return; + } + + ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg); + if (ret) { + error_report("Failed to get KVM_REG_ARM_TIMER_CNT"); + abort(); + } + + cpu->kvm_vtime_dirty = true; +} + +void kvm_arm_put_virtual_time(CPUState *cs) +{ + ARMCPU *cpu = ARM_CPU(cs); + struct kvm_one_reg reg = { + .id = KVM_REG_ARM_TIMER_CNT, + .addr = (uintptr_t)&cpu->kvm_vtime, + }; + int ret; + + if (!cpu->kvm_vtime_dirty) { + return; + } + + ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg); + if (ret) { + error_report("Failed to set KVM_REG_ARM_TIMER_CNT"); + abort(); + } + + cpu->kvm_vtime_dirty = false; +} + int kvm_put_vcpu_events(ARMCPU *cpu) { CPUARMState *env = &cpu->env; @@ -XXX,XX +XXX,XX @@ MemTxAttrs kvm_arch_post_run(CPUState *cs, struct kvm_run *run) return MEMTXATTRS_UNSPECIFIED; } +void kvm_arm_vm_state_change(void *opaque, int running, RunState state) +{ + CPUState *cs = opaque; + ARMCPU *cpu = ARM_CPU(cs); + + if (running) { + if (cpu->kvm_adjvtime) { + kvm_arm_put_virtual_time(cs); + } + } else { + if (cpu->kvm_adjvtime) { + kvm_arm_get_virtual_time(cs); + } + } +} int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run) { diff --git a/target/arm/kvm32.c b/target/arm/kvm32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm32.c +++ b/target/arm/kvm32.c @@ -XXX,XX +XXX,XX @@ #include "qemu-common.h" #include "cpu.h" #include "qemu/timer.h" +#include "sysemu/runstate.h" #include "sysemu/kvm.h" #include "kvm_arm.h" #include "internals.h" @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) return -EINVAL; } + qemu_add_vm_change_state_handler(kvm_arm_vm_state_change, cs); + /* Determine init features for this CPU */ memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features)); if (cpu->start_powered_off) { diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm64.c +++ b/target/arm/kvm64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/host-utils.h" #include "qemu/main-loop.h" #include "exec/gdbstub.h" +#include "sysemu/runstate.h" #include "sysemu/kvm.h" #include "sysemu/kvm_int.h" #include "kvm_arm.h" @@ -XXX,XX +XXX,XX @@ int kvm_arch_init_vcpu(CPUState *cs) return -EINVAL; } + qemu_add_vm_change_state_handler(kvm_arm_vm_state_change, cs); + /* Determine init features for this CPU */ memset(cpu->kvm_init_features, 0, sizeof(cpu->kvm_init_features)); if (cpu->start_powered_off) { diff --git a/target/arm/machine.c b/target/arm/machine.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/machine.c +++ b/target/arm/machine.c @@ -XXX,XX +XXX,XX @@ static int cpu_pre_save(void *opaque) /* This should never fail */ abort(); } + + /* + * kvm_arm_cpu_pre_save() must be called after + * write_kvmstate_to_list() + */ + kvm_arm_cpu_pre_save(cpu); } else { if (!write_cpustate_to_list(cpu, false)) { /* This should never fail. */ @@ -XXX,XX +XXX,XX @@ static int cpu_post_load(void *opaque, int version_id) * we're using it. */ write_list_to_cpustate(cpu); + kvm_arm_cpu_post_load(cpu); } else { if (!write_list_to_cpustate(cpu)) { return -1; -- 2.20.1 From: Andrew Jones <drjones@redhat.com> kvm-no-adjvtime is a KVM specific CPU property and a first of its kind. To accommodate it we also add kvm_arm_add_vcpu_properties() and a KVM specific CPU properties description to the CPU features document. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 20200120101023.16030-7-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/virt.h | 1 + target/arm/kvm_arm.h | 11 ++++++++++ hw/arm/virt.c | 8 ++++++++ target/arm/cpu.c | 2 ++ target/arm/cpu64.c | 1 + target/arm/kvm.c | 28 +++++++++++++++++++++++++ target/arm/monitor.c | 1 + tests/qtest/arm-cpu-features.c | 4 ++++ docs/arm-cpu-features.rst | 37 +++++++++++++++++++++++++++++++++- 9 files changed, 92 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -XXX,XX +XXX,XX @@ typedef struct { bool smbios_old_sys_ver; bool no_highmem_ecam; bool no_ged; /* Machines < 4.2 has no support for ACPI GED device */ + bool kvm_no_adjvtime; } VirtMachineClass; typedef struct { diff --git a/target/arm/kvm_arm.h b/target/arm/kvm_arm.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm_arm.h +++ b/target/arm/kvm_arm.h @@ -XXX,XX +XXX,XX @@ void kvm_arm_sve_get_vls(CPUState *cs, unsigned long *map); */ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu); +/** + * kvm_arm_add_vcpu_properties: + * @obj: The CPU object to add the properties to + * + * Add all KVM specific CPU properties to the CPU object. These + * are the CPU properties with "kvm-" prefixed names. + */ +void kvm_arm_add_vcpu_properties(Object *obj); + /** * kvm_arm_aarch32_supported: * @cs: CPUState @@ -XXX,XX +XXX,XX @@ static inline void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) cpu->host_cpu_probe_failed = true; } +static inline void kvm_arm_add_vcpu_properties(Object *obj) {} + static inline bool kvm_arm_aarch32_supported(CPUState *cs) { return false; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) } } + if (vmc->kvm_no_adjvtime && + object_property_find(cpuobj, "kvm-no-adjvtime", NULL)) { + object_property_set_bool(cpuobj, true, "kvm-no-adjvtime", NULL); + } + if (vmc->no_pmu && object_property_find(cpuobj, "pmu", NULL)) { object_property_set_bool(cpuobj, false, "pmu", NULL); } @@ -XXX,XX +XXX,XX @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 0) static void virt_machine_4_2_options(MachineClass *mc) { + VirtMachineClass *vmc = VIRT_MACHINE_CLASS(OBJECT_CLASS(mc)); + virt_machine_5_0_options(mc); compat_props_add(mc->compat_props, hw_compat_4_2, hw_compat_4_2_len); + vmc->kvm_no_adjvtime = true; } DEFINE_VIRT_MACHINE(4, 2) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_max_initfn(Object *obj) if (kvm_enabled()) { kvm_arm_set_cpu_features_from_host(cpu); + kvm_arm_add_vcpu_properties(obj); } else { cortex_a15_initfn(obj); @@ -XXX,XX +XXX,XX @@ static void arm_host_initfn(Object *obj) if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { aarch64_add_sve_properties(obj); } + kvm_arm_add_vcpu_properties(obj); arm_cpu_post_init(obj); } diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu64.c +++ b/target/arm/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_max_initfn(Object *obj) if (kvm_enabled()) { kvm_arm_set_cpu_features_from_host(cpu); + kvm_arm_add_vcpu_properties(obj); } else { uint64_t t; uint32_t u; diff --git a/target/arm/kvm.c b/target/arm/kvm.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/kvm.c +++ b/target/arm/kvm.c @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qemu/error-report.h" #include "qemu/main-loop.h" +#include "qom/object.h" +#include "qapi/error.h" #include "sysemu/sysemu.h" #include "sysemu/kvm.h" #include "sysemu/kvm_int.h" @@ -XXX,XX +XXX,XX @@ void kvm_arm_set_cpu_features_from_host(ARMCPU *cpu) env->features = arm_host_cpu_features.features; } +static bool kvm_no_adjvtime_get(Object *obj, Error **errp) +{ + return !ARM_CPU(obj)->kvm_adjvtime; +} + +static void kvm_no_adjvtime_set(Object *obj, bool value, Error **errp) +{ + ARM_CPU(obj)->kvm_adjvtime = !value; +} + +/* KVM VCPU properties should be prefixed with "kvm-". */ +void kvm_arm_add_vcpu_properties(Object *obj) +{ + if (!kvm_enabled()) { + return; + } + + ARM_CPU(obj)->kvm_adjvtime = true; + object_property_add_bool(obj, "kvm-no-adjvtime", kvm_no_adjvtime_get, + kvm_no_adjvtime_set, &error_abort); + object_property_set_description(obj, "kvm-no-adjvtime", + "Set on to disable the adjustment of " + "the virtual counter. VM stopped time " + "will be counted.", &error_abort); +} + bool kvm_arm_pmu_supported(CPUState *cpu) { return kvm_check_extension(cpu->kvm_state, KVM_CAP_ARM_PMU_V3); diff --git a/target/arm/monitor.c b/target/arm/monitor.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/monitor.c +++ b/target/arm/monitor.c @@ -XXX,XX +XXX,XX @@ static const char *cpu_model_advertised_features[] = { "sve128", "sve256", "sve384", "sve512", "sve640", "sve768", "sve896", "sve1024", "sve1152", "sve1280", "sve1408", "sve1536", "sve1664", "sve1792", "sve1920", "sve2048", + "kvm-no-adjvtime", NULL }; diff --git a/tests/qtest/arm-cpu-features.c b/tests/qtest/arm-cpu-features.c index XXXXXXX..XXXXXXX 100644 --- a/tests/qtest/arm-cpu-features.c +++ b/tests/qtest/arm-cpu-features.c @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion(const void *data) assert_has_feature_enabled(qts, "cortex-a15", "pmu"); assert_has_not_feature(qts, "cortex-a15", "aarch64"); + assert_has_not_feature(qts, "max", "kvm-no-adjvtime"); + if (g_str_equal(qtest_get_arch(), "aarch64")) { assert_has_feature_enabled(qts, "max", "aarch64"); assert_has_feature_enabled(qts, "max", "sve"); @@ -XXX,XX +XXX,XX @@ static void test_query_cpu_model_expansion_kvm(const void *data) return; } + assert_has_feature_disabled(qts, "host", "kvm-no-adjvtime"); + if (g_str_equal(qtest_get_arch(), "aarch64")) { bool kvm_supports_sve; char max_name[8], name[8]; diff --git a/docs/arm-cpu-features.rst b/docs/arm-cpu-features.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/arm-cpu-features.rst +++ b/docs/arm-cpu-features.rst @@ -XXX,XX +XXX,XX @@ supporting the feature or only supporting the feature under certain configurations. For example, the `aarch64` CPU feature, which, when disabled, enables the optional AArch32 CPU feature, is only supported when using the KVM accelerator and when running on a host CPU type that -supports the feature. +supports the feature. While `aarch64` currently only works with KVM, +it could work with TCG. CPU features that are specific to KVM are +prefixed with "kvm-" and are described in "KVM VCPU Features". CPU Feature Probing =================== @@ -XXX,XX +XXX,XX @@ disabling many SVE vector lengths would be quite verbose, the `sve<N>` CPU properties have special semantics (see "SVE CPU Property Parsing Semantics"). +KVM VCPU Features +================= + +KVM VCPU features are CPU features that are specific to KVM, such as +paravirt features or features that enable CPU virtualization extensions. +The features' CPU properties are only available when KVM is enabled and +are named with the prefix "kvm-". KVM VCPU features may be probed, +enabled, and disabled in the same way as other CPU features. Below is +the list of KVM VCPU features and their descriptions. + + kvm-no-adjvtime By default kvm-no-adjvtime is disabled. This + means that by default the virtual time + adjustment is enabled (vtime is *not not* + adjusted). + + When virtual time adjustment is enabled each + time the VM transitions back to running state + the VCPU's virtual counter is updated to ensure + stopped time is not counted. This avoids time + jumps surprising guest OSes and applications, + as long as they use the virtual counter for + timekeeping. However it has the side effect of + the virtual and physical counters diverging. + All timekeeping based on the virtual counter + will appear to lag behind any timekeeping that + does not subtract VM stopped time. The guest + may resynchronize its virtual counter with + other time sources as needed. + + Enable kvm-no-adjvtime to disable virtual time + adjustment, also restoring the legacy (pre-5.0) + behavior. + SVE CPU Properties ================== -- 2.20.1 Hi; here's the latest round of arm patches. I have included also my patchset for the RTC devices to avoid keeping time_t and time_t diffs in 32-bit variables. thanks -- PMM The following changes since commit 156618d9ea67f2f2e31d9dedd97f2dcccbe6808c: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-08-30 09:20:27 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230831 for you to fetch changes up to e73b8bb8a3e9a162f70e9ffbf922d4fafc96bbfb: hw/arm: Set number of MPU regions correctly for an505, an521, an524 (2023-08-31 11:07:02 +0100) ---------------------------------------------------------------- target-arm queue: * Some of the preliminary patches for Cortex-A710 support * i.MX7 and i.MX6UL refactoring * Implement SRC device for i.MX7 * Catch illegal-exception-return from EL3 with bad NSE/NS * Use 64-bit offsets for holding time_t differences in RTC devices * Model correct number of MPU regions for an505, an521, an524 boards ---------------------------------------------------------------- Alex Bennée (1): target/arm: properly document FEAT_CRC32 Jean-Christophe Dubois (6): Remove i.MX7 IOMUX GPR device from i.MX6UL Refactor i.MX6UL processor code Add i.MX6UL missing devices. Refactor i.MX7 processor code Add i.MX7 missing TZ devices and memory regions Add i.MX7 SRC device implementation Peter Maydell (8): target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm() hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference rtc: Use time_t for passing and returning time offsets target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties hw/arm: Set number of MPU regions correctly for an505, an521, an524 Richard Henderson (9): target/arm: Reduce dcz_blocksize to uint8_t target/arm: Allow cpu to configure GM blocksize target/arm: Support more GM blocksizes target/arm: When tag memory is not present, set MTE=1 target/arm: Introduce make_ccsidr64 target/arm: Apply access checks to neoverse-n1 special registers target/arm: Apply access checks to neoverse-v1 special registers target/arm: Suppress FEAT_TRBE (Trace Buffer Extension) target/arm: Implement FEAT_HPDS2 as a no-op docs/system/arm/emulation.rst | 2 + include/hw/arm/armsse.h | 5 + include/hw/arm/armv7m.h | 8 + include/hw/arm/fsl-imx6ul.h | 158 ++++++++++++++++--- include/hw/arm/fsl-imx7.h | 338 ++++++++++++++++++++++++++++++----------- include/hw/misc/imx7_src.h | 66 ++++++++ include/hw/rtc/aspeed_rtc.h | 2 +- include/sysemu/rtc.h | 4 +- target/arm/cpregs.h | 2 + target/arm/cpu.h | 5 +- target/arm/internals.h | 6 - target/arm/tcg/translate.h | 2 + hw/arm/armsse.c | 16 ++ hw/arm/armv7m.c | 21 +++ hw/arm/fsl-imx6ul.c | 174 +++++++++++++-------- hw/arm/fsl-imx7.c | 201 +++++++++++++++++++----- hw/arm/mps2-tz.c | 29 ++++ hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++ hw/rtc/aspeed_rtc.c | 5 +- hw/rtc/m48t59.c | 2 +- hw/rtc/twl92230.c | 4 +- softmmu/rtc.c | 4 +- target/arm/cpu.c | 207 ++++++++++++++----------- target/arm/helper.c | 15 +- target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 102 +++++++++---- target/arm/tcg/helper-a64.c | 9 ++ target/arm/tcg/mte_helper.c | 90 ++++++++--- target/arm/tcg/translate-a64.c | 5 +- hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 31 files changed, 1393 insertions(+), 372 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c From: Richard Henderson <richard.henderson@linaro.org> This value is only 4 bits wide. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230811214031.171020-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool prop_lpa2; /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ - uint32_t dcz_blocksize; + uint8_t dcz_blocksize; + uint64_t rvbar_prop; /* Property/input signals. */ /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we hard-coded the blocksize with GMID_EL1_BS. But the value we choose for -cpu max does not match the value that cortex-a710 uses. Mirror the way we handle dcz_blocksize. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230811214031.171020-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 6 ----- target/arm/tcg/translate.h | 2 ++ target/arm/helper.c | 11 +++++--- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/mte_helper.c | 46 ++++++++++++++++++++++------------ target/arm/tcg/translate-a64.c | 5 ++-- 7 files changed, 45 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint8_t dcz_blocksize; + /* GM blocksize, in log_2(words), ie low 4 bits of GMID_EL0 */ + uint8_t gm_blocksize; uint64_t rvbar_prop; /* Property/input signals. */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs); #endif /* !CONFIG_USER_ONLY */ -/* - * The log2 of the words in the tag block, for GMID_EL1.BS. - * The is the maximum, 256 bytes, which manipulates 64-bits of tags. - */ -#define GMID_EL1_BS 6 - /* * SVE predicates are 1/8 the size of SVE vectors, and cannot use * the same simd_desc() encoding due to restrictions on size. diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.h +++ b/target/arm/tcg/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int8_t btype; /* A copy of cpu->dcz_blocksize. */ uint8_t dcz_blocksize; + /* A copy of cpu->gm_blocksize. */ + uint8_t gm_blocksize; /* True if this page is guarded. */ bool guarded_page; /* Bottom two bits of XScale c15_cpar coprocessor access control reg */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, .access = PL1_RW, .accessfn = access_mte, .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, - { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, - .access = PL1_R, .accessfn = access_aa64_tid5, - .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, { .name = "TCO", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, .type = ARM_CP_NO_RAW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * then define only a RAZ/WI version of PSTATE.TCO. */ if (cpu_isar_feature(aa64_mte, cpu)) { + ARMCPRegInfo gmid_reginfo = { + .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL1_R, .accessfn = access_aa64_tid5, + .type = ARM_CP_CONST, .resetvalue = cpu->gm_blocksize, + }; + define_one_arm_cp_reg(cpu, &gmid_reginfo); define_arm_cp_regs(cpu, mte_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + cpu->gm_blocksize = 6; /* 256 bytes */ cpu->sve_vq.supported = MAKE_64BIT_MASK(0, ARM_MAX_VQ); cpu->sme_vq.supported = SVE_VQ_POW2_MAP; diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(st2g_stub)(CPUARMState *env, uint64_t ptr) } } -#define LDGM_STGM_SIZE (4 << GMID_EL1_BS) - uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_LOAD, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* The tag is squashed to zero if the page does not support tags. */ if (!tag_mem) { return 0; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are loading 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - return ldq_le_p(tag_mem); + switch (gm_bs) { + case 6: + /* 256 bytes -> 16 tags -> 64 result bits */ + return ldq_le_p(tag_mem); + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_STORE, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* * Tag store only happens if the page support tags, @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are storing 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - stq_le_p(tag_mem, val); + switch (gm_bs) { + case 6: + stq_le_p(tag_mem, val); + break; + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STGM(DisasContext *s, arg_ldst_tag *a) gen_helper_stgm(cpu_env, addr, tcg_rt); } else { MMUAccessType acc = MMU_DATA_STORE; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static bool trans_LDGM(DisasContext *s, arg_ldst_tag *a) gen_helper_ldgm(tcg_rt, cpu_env, addr); } else { MMUAccessType acc = MMU_DATA_LOAD; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->cp_regs = arm_cpu->cp_regs; dc->features = env->features; dc->dcz_blocksize = arm_cpu->dcz_blocksize; + dc->gm_blocksize = arm_cpu->gm_blocksize; #ifdef CONFIG_USER_ONLY /* In sve_probe_page, we assume TBI is enabled. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Support all of the easy GM block sizes. Use direct memory operations, since the pointers are aligned. While BS=2 (16 bytes, 1 tag) is a legal setting, that requires an atomic store of one nibble. This is not difficult, but there is also no point in supporting it until required. Note that cortex-a710 sets GM blocksize to match its cacheline size of 64 bytes. I expect many implementations will also match the cacheline, which makes 16 bytes very unlikely. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 18 +++++++++--- target/arm/tcg/mte_helper.c | 56 +++++++++++++++++++++++++++++++------ 2 files changed, 62 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) ID_PFR1, VIRTUALIZATION, 0); } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* + * The architectural range of GM blocksize is 2-6, however qemu + * doesn't support blocksize of 2 (see HELPER(ldgm)). + */ + if (tcg_enabled()) { + assert(cpu->gm_blocksize >= 3 && cpu->gm_blocksize <= 6); + } + #ifndef CONFIG_USER_ONLY - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) { /* * Disable the MTE feature bits if we do not have tag-memory * provided by the machine. */ - cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); - } + if (cpu->tag_memory == NULL) { + cpu->isar.id_aa64pfr1 = + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + } #endif + } if (tcg_enabled()) { /* diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + uint64_t ret; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) /* * The ordering of elements within the word corresponds to - * a little-endian operation. + * a little-endian operation. Computation of shift comes from + * + * index = address<LOG2_TAG_GRANULE+3:LOG2_TAG_GRANULE> + * data<index*4+3:index*4> = tag + * + * Because of the alignment of ptr above, BS=6 has shift=0. + * All memory operations are aligned. Defer support for BS=2, + * requiring insertion or extraction of a nibble, until we + * support a cpu that requires it. */ switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + ret = *(uint8_t *)tag_mem; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + ret = cpu_to_le16(*(uint16_t *)tag_mem); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + ret = cpu_to_le32(*(uint32_t *)tag_mem); + break; case 6: /* 256 bytes -> 16 tags -> 64 result bits */ - return ldq_le_p(tag_mem); + return cpu_to_le64(*(uint64_t *)tag_mem); default: - /* cpu configured with unsupported gm blocksize. */ + /* + * CPU configured with unsupported/invalid gm blocksize. + * This is detected early in arm_cpu_realizefn. + */ g_assert_not_reached(); } + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + return ret << shift; } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - /* - * The ordering of elements within the word corresponds to - * a little-endian operation. - */ + /* See LDGM for comments on BS and on shift. */ + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + val >>= shift; switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + *(uint8_t *)tag_mem = val; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + *(uint16_t *)tag_mem = cpu_to_le16(val); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + *(uint32_t *)tag_mem = cpu_to_le32(val); + break; case 6: - stq_le_p(tag_mem, val); + /* 256 bytes -> 16 tags -> 64 result bits */ + *(uint64_t *)tag_mem = cpu_to_le64(val); break; default: /* cpu configured with unsupported gm blocksize. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When the cpu support MTE, but the system does not, reduce cpu support to user instructions at EL0 instead of completely disabling MTE. If we encounter a cpu implementation which does something else, we can revisit this setting. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) #ifndef CONFIG_USER_ONLY /* - * Disable the MTE feature bits if we do not have tag-memory - * provided by the machine. + * If we do not have tag-memory provided by the machine, + * reduce MTE support to instructions enabled at EL0. + * This matches Cortex-A710 BROADCASTMTE input being LOW. */ if (cpu->tag_memory == NULL) { cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 1); } #endif } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Do not hard-code the constants for Neoverse V1. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 48 ++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" +#include "qemu/units.h" #include "internals.h" #include "cpregs.h" +static uint64_t make_ccsidr64(unsigned assoc, unsigned linesize, + unsigned cachesize) +{ + unsigned lg_linesize = ctz32(linesize); + unsigned sets; + + /* + * The 64-bit CCSIDR_EL1 format is: + * [55:32] number of sets - 1 + * [23:3] associativity - 1 + * [2:0] log2(linesize) - 4 + * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc + */ + assert(assoc != 0); + assert(is_power_of_2(linesize)); + assert(lg_linesize >= 4 && lg_linesize <= 7 + 4); + + /* sets * associativity * linesize == cachesize. */ + sets = cachesize / (assoc * linesize); + assert(cachesize % (assoc * linesize) == 0); + + return ((uint64_t)(sets - 1) << 32) + | ((assoc - 1) << 3) + | (lg_linesize - 4); +} + static void aarch64_a35_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_neoverse_v1_initfn(Object *obj) * The Neoverse-V1 r1p2 TRM lists 32-bit format CCSIDR_EL1 values, * but also says it implements CCIDX, which means they should be * 64-bit format. So we here use values which are based on the textual - * information in chapter 2 of the TRM (and on the fact that - * sets * associativity * linesize == cachesize). - * - * The 64-bit CCSIDR_EL1 format is: - * [55:32] number of sets - 1 - * [23:3] associativity - 1 - * [2:0] log2(linesize) - 4 - * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc - * - * L1: 4-way set associative 64-byte line size, total size 64K, - * so sets is 256. + * information in chapter 2 of the TRM: * + * L1: 4-way set associative 64-byte line size, total size 64K. * L2: 8-way set associative, 64 byte line size, either 512K or 1MB. - * We pick 1MB, so this has 2048 sets. - * * L3: No L3 (this matches the CLIDR_EL1 value). */ - cpu->ccsidr[0] = 0x000000ff0000001aull; /* 64KB L1 dcache */ - cpu->ccsidr[1] = 0x000000ff0000001aull; /* 64KB L1 icache */ - cpu->ccsidr[2] = 0x000007ff0000003aull; /* 1MB L2 cache */ + cpu->ccsidr[0] = make_ccsidr64(4, 64, 64 * KiB); /* L1 dcache */ + cpu->ccsidr[1] = cpu->ccsidr[0]; /* L1 icache */ + cpu->ccsidr[2] = make_ccsidr64(8, 64, 1 * MiB); /* L2 cache */ /* From 3.2.115 SCTLR_EL3 */ cpu->reset_sctlr = 0x30c50838; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Access to many of the special registers is enabled or disabled by ACTLR_EL[23], which we implement as constant 0, which means that all writes outside EL3 should trap. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 2 ++ target/arm/helper.c | 4 ++-- target/arm/tcg/cpu64.c | 46 +++++++++++++++++++++++++++++++++--------- 3 files changed, 41 insertions(+), 11 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +CPAccessResult access_tvm_trvm(CPUARMState *, const ARMCPRegInfo *, bool); + #endif /* TARGET_ARM_CPREGS_H */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, } /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ -static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) +CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) { if (arm_current_el(env) == 1) { uint64_t trap = isread ? HCR_TRVM : HCR_TVM; diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a64fx_initfn(Object *obj) /* TODO: Add A64FX specific HPC extension registers */ } +static CPAccessResult access_actlr_w(CPUARMState *env, const ARMCPRegInfo *r, + bool read) +{ + if (!read) { + int el = arm_current_el(env); + + /* Because ACTLR_EL2 is constant 0, writes below EL2 trap to EL2. */ + if (el < 2 && arm_is_el2_enabled(env)) { + return CP_ACCESS_TRAP_EL2; + } + /* Because ACTLR_EL3 is constant 0, writes below EL3 trap to EL3. */ + if (el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + return CP_ACCESS_TRAP_EL3; + } + } + return CP_ACCESS_OK; +} + static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { { .name = "ATCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 7, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + /* Traps and enables are the same as for TCR_EL1. */ + .accessfn = access_tvm_trvm, .fgt = FGT_TCR_EL1, }, { .name = "ATCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 15, .crm = 7, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR3_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, /* * Report CPUCFR_EL1.SCU as 1, as we do not implement the DSU * (and in particular its system registers). @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 4 }, { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 4, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010, + .accessfn = access_actlr_w }, { .name = "CPUPCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 8, .opc2 = 1, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUPWRCTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCDN_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCTL_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGF_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, }; static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> There is only one additional EL1 register modeled, which also needs to use access_actlr_w. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) static const ARMCPRegInfo neoverse_v1_cp_reginfo[] = { { .name = "CPUECTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 5, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUPPMCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 2, .opc2 = 0, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing external to the cpu, which is out of scope for QEMU. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* FEAT_SPE (Statistical Profiling Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, PMSVER, 0); + /* FEAT_TRBE (Trace Buffer Extension) */ + cpu->isar.id_aa64dfr0 = + FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEBUFFER, 0); /* FEAT_TRF (Self-hosted Trace Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEFILT, 0); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This feature allows the operating system to set TCR_ELx.HWU* to allow the implementation to use the PBHA bits from the block and page descriptors for for IMPLEMENTATION DEFINED purposes. Since QEMU has no need to use these bits, we may simply ignore them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HAFDBS (Hardware management of the access flag and dirty bit state) - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) +- FEAT_HPDS2 (Translation table page-based hardware attributes) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR1, HAFDBS, 2); /* FEAT_HAFDBS */ t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 3); /* FEAT_PAN3 */ t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> This is a mandatory feature for Armv8.1 architectures but we don't state the feature clearly in our emulation list. Also include FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org Cc: qemu-stable@nongnu.org Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org> [PMM: pluralize 'instructions' in docs] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CRC32 (CRC32 instructions) - FEAT_CSV2 (Cache speculation variant 2) - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ - t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); /* FEAT_CRC32 */ t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> i.MX7 IOMUX GPR device is not equivalent to i.MX6UL IOMUXC GPR device. In particular, register 22 is not present on i.MX6UL and this is actualy The only register that is really emulated in the i.MX7 IOMUX GPR device. Note: The i.MX6UL code is actually also implementing the IOMUX GPR device as an unimplemented device at the same bus adress and the 2 instantiations were actualy colliding. So we go back to the unimplemented device for now. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 48681bf51ee97646479bb261bee19abebbc8074e.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 -- hw/arm/fsl-imx6ul.c | 11 ----------- 2 files changed, 13 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx6ul_ccm.h" #include "hw/misc/imx6_src.h" #include "hw/misc/imx7_snvs.h" -#include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX6SRCState src; IMX7SNVSState snvs; IMXGPCv2State gpcv2; - IMX7GPRState gpr; IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); - /* - * GPR - */ - object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); - /* * GPIOs 1 to 5 */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOGn_IRQ[i])); } - /* - * GPR - */ - sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); - /* * SDMA */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for most i.MX6UL devices in i.MX6UL header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: d579043fbd4e4b490370783fda43fc02c8e9be75.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 156 +++++++++++++++++++++++++++++++----- hw/arm/fsl-imx6ul.c | 147 ++++++++++++++++++++++----------- 2 files changed, 232 insertions(+), 71 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX6UL "fsl-imx6ul" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX6ULState, FSL_IMX6UL) @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_ADCS = 2, FSL_IMX6UL_NUM_USB_PHYS = 2, FSL_IMX6UL_NUM_USBS = 2, + FSL_IMX6UL_NUM_SAIS = 3, + FSL_IMX6UL_NUM_CANS = 2, + FSL_IMX6UL_NUM_PWMS = 4, }; struct FslIMX6ULState { @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { enum FslIMX6ULMemoryMap { FSL_IMX6UL_MMDC_ADDR = 0x80000000, - FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX6UL_MMDC_SIZE = (2 * GiB), FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, - FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, - FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, - FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, - FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_MEM_SIZE = (256 * MiB), - /* AIPS-2 */ + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_ALIAS_SIZE = (128 * MiB), + + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_EIM_CS_SIZE = (128 * MiB), + + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_AES_ENCRYPT_SIZE = (1 * MiB), + + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_RX_SIZE = (32 * MiB), + + /* AIPS-2 Begin */ FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, FSL_IMX6UL_UART4_ADDR = 0x021F0000, FSL_IMX6UL_UART3_ADDR = 0x021EC000, FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_QSPI_SIZE = 0x500, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CTRL_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_CMP_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_SYS_CNT_RD_SIZE = (16 * KiB), + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_TZASC_SIZE = (16 * KiB), + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_PXP_SIZE = (16 * KiB), + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSI_SIZE = 0x100, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_CSU_SIZE = (16 * KiB), + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_OCOTP_CTRL_SIZE = (4 * KiB), + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_EIM_SIZE = 0x100, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_MMDC_CFG_SIZE = (4 * KiB), + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_ROMCP_SIZE = 0x300, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, FSL_IMX6UL_I2C2_ADDR = 0x021A4000, FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_ADCn_SIZE = 0x100, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, FSL_IMX6UL_USDHC1_ADDR = 0x02190000, - FSL_IMX6UL_SIM1_ADDR = 0x0218C000, - FSL_IMX6UL_ENET1_ADDR = 0x02188000, - FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, - FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, - FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, - FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, - FSL_IMX6UL_CAAM_ADDR = 0x02140000, - FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, - /* AIPS-1 */ + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_SIMn_SIZE = (16 * KiB), + + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB1_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_USB2_ADDR = 0x02184200, + + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_USBO2_PL301_SIZE = (16 * KiB), + + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_AIPS2_CFG_SIZE = 0x100, + + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_CAAM_SIZE = (16 * KiB), + + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + FSL_IMX6UL_A7MPCORE_DAP_SIZE = (4 * KiB), + /* AIPS-2 End */ + + /* AIPS-1 Begin */ FSL_IMX6UL_PWM8_ADDR = 0x020FC000, FSL_IMX6UL_PWM7_ADDR = 0x020F8000, FSL_IMX6UL_PWM6_ADDR = 0x020F4000, FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_SDMA_SIZE = 0x300, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_GPR_SIZE = 0x40, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_IOMUXC_SIZE = 0x700, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_USBPHY2_ADDR = 0x020CA000, - FSL_IMX6UL_USBPHY2_SIZE = (4 * 1024), FSL_IMX6UL_USBPHY1_ADDR = 0x020C9000, - FSL_IMX6UL_USBPHY1_SIZE = (4 * 1024), + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_ANALOG_SIZE = 0x300, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_KPP_SIZE = 0x10, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_SNVS_LP_SIZE = (16 * KiB), + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_CANn_SIZE = (4 * KiB), + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, FSL_IMX6UL_PWM3_ADDR = 0x02088000, FSL_IMX6UL_PWM2_ADDR = 0x02084000, FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_PWMn_SIZE = 0x20, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_AIPS1_CFG_SIZE = (16 * KiB), + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_BEE_SIZE = (16 * KiB), + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_TOUCH_CTRL_SIZE = 0x100, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_SPBA_SIZE = 0x100, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_ASRC_SIZE = 0x100, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, FSL_IMX6UL_SAI2_ADDR = 0x0202C000, FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_SAIn_SIZE = 0x200, + FSL_IMX6UL_UART8_ADDR = 0x02024000, FSL_IMX6UL_UART1_ADDR = 0x02020000, FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + FSL_IMX6UL_SPDIF_SIZE = 0x100, + /* AIPS-1 End */ + + FSL_IMX6UL_BCH_ADDR = 0x01808000, + FSL_IMX6UL_BCH_SIZE = 0x200, + + FSL_IMX6UL_GPMI_ADDR = 0x01806000, + FSL_IMX6UL_GPMI_SIZE = 0x200, FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, - FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + FSL_IMX6UL_APBH_DMA_SIZE = (4 * KiB), FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, - FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = (384 * KiB), + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, - FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_OCRAM_MEM_SIZE = (128 * KiB), + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, - FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_CAAM_MEM_SIZE = (32 * KiB), + FSL_IMX6UL_ROM_ADDR = 0x00000000, - FSL_IMX6UL_ROM_SIZE = 0x00018000, + FSL_IMX6UL_ROM_SIZE = (96 * KiB), }; enum FslIMX6ULIRQs { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * GPIOs 1 to 5 + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { snprintf(name, NAME_SIZE, "epit%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * eCSPI + * eCSPIs */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { snprintf(name, NAME_SIZE, "usbphy%d", i); object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); } + + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX6UL_A7MPCORE_DAP_SIZE); /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * GPIO + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * IOMUXC and IOMUXC_GPR + * IOMUXC */ - for (i = 0; i < 1; i++) { - static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { - FSL_IMX6UL_IOMUXC_ADDR, - FSL_IMX6UL_IOMUXC_GPR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); - } + create_unimplemented_device("iomuxc", FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_gpr", FSL_IMX6UL_IOMUXC_GPR_ADDR, + FSL_IMX6UL_IOMUXC_GPR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { FSL_IMX6UL_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENETn_TIMER_IRQ[i])); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { + static const hwaddr + FSL_IMX6UL_USB_PHYn_ADDR[FSL_IMX6UL_NUM_USB_PHYS] = { + FSL_IMX6UL_USBPHY1_ADDR, + FSL_IMX6UL_USBPHY2_ADDR, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, - FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000); + FSL_IMX6UL_USB_PHYn_ADDR[i]); } + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { + static const hwaddr FSL_IMX6UL_USB02_USBn_ADDR[FSL_IMX6UL_NUM_USBS] = { + FSL_IMX6UL_USBO2_USB1_ADDR, + FSL_IMX6UL_USBO2_USB2_ADDR, + }; + static const int FSL_IMX6UL_USBn_IRQ[] = { FSL_IMX6UL_USB1_IRQ, FSL_IMX6UL_USB2_IRQ, }; + sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, - FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200); + FSL_IMX6UL_USB02_USBn_ADDR[i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX6UL_USBn_IRQ[i])); } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { FSL_IMX6UL_WDOG1_IRQ, FSL_IMX6UL_WDOG2_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * SDMA */ - create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, + FSL_IMX6UL_SDMA_SIZE); /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000); - create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000); - create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_SAIS; i++) { + static const hwaddr FSL_IMX6UL_SAIn_ADDR[FSL_IMX6UL_NUM_SAIS] = { + FSL_IMX6UL_SAI1_ADDR, + FSL_IMX6UL_SAI2_ADDR, + FSL_IMX6UL_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX6UL_SAIn_ADDR[i], + FSL_IMX6UL_SAIn_SIZE); + } /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000); - create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000); - create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000); - create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_PWMS; i++) { + static const hwaddr FSL_IMX6UL_PWMn_ADDR[FSL_IMX6UL_NUM_PWMS] = { + FSL_IMX6UL_PWM1_ADDR, + FSL_IMX6UL_PWM2_ADDR, + FSL_IMX6UL_PWM3_ADDR, + FSL_IMX6UL_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX6UL_PWMn_ADDR[i], + FSL_IMX6UL_PWMn_SIZE); + } /* * Audio ASRC (asynchronous sample rate converter) */ - create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000); + create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, + FSL_IMX6UL_ASRC_SIZE); /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000); - create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_CANS; i++) { + static const hwaddr FSL_IMX6UL_CANn_ADDR[FSL_IMX6UL_NUM_CANS] = { + FSL_IMX6UL_CAN1_ADDR, + FSL_IMX6UL_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX6UL_CANn_ADDR[i], + FSL_IMX6UL_CANn_SIZE); + } /* * APHB_DMA @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) }; snprintf(name, NAME_SIZE, "adc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], + FSL_IMX6UL_ADCn_SIZE); } /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, + FSL_IMX6UL_LCDIF_SIZE); /* * ROM memory -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add 4 missing PWM devices Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 59e4dc56e14eccfefd379275ec19048dff9c10b3.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 +- hw/arm/fsl-imx6ul.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_USBS = 2, FSL_IMX6UL_NUM_SAIS = 3, FSL_IMX6UL_NUM_CANS = 2, - FSL_IMX6UL_NUM_PWMS = 4, + FSL_IMX6UL_NUM_PWMS = 8, }; struct FslIMX6ULState { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_PWM2_ADDR, FSL_IMX6UL_PWM3_ADDR, FSL_IMX6UL_PWM4_ADDR, + FSL_IMX6UL_PWM5_ADDR, + FSL_IMX6UL_PWM6_ADDR, + FSL_IMX6UL_PWM7_ADDR, + FSL_IMX6UL_PWM8_ADDR, }; snprintf(name, NAME_SIZE, "pwm%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, FSL_IMX6UL_LCDIF_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX6UL_CSU_ADDR, + FSL_IMX6UL_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX6UL_TZASC_ADDR, + FSL_IMX6UL_TZASC_SIZE); + /* * ROM memory */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for all i.MX7 devices in i.MX7 header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 59e195d33e4d486a8d131392acd46633c8c10ed7.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 330 ++++++++++++++++++++++++++++---------- hw/arm/fsl-imx7.c | 130 ++++++++++----- 2 files changed, 335 insertions(+), 125 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" -#include "hw/misc/imx6_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ #include "hw/usb/chipidea.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX7 "fsl-imx7" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX7State, FSL_IMX7) @@ -XXX,XX +XXX,XX @@ enum FslIMX7Configuration { FSL_IMX7_NUM_ECSPIS = 4, FSL_IMX7_NUM_USBS = 3, FSL_IMX7_NUM_ADCS = 2, + FSL_IMX7_NUM_SAIS = 3, + FSL_IMX7_NUM_CANS = 2, + FSL_IMX7_NUM_PWMS = 4, }; struct FslIMX7State { @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { enum FslIMX7MemoryMap { FSL_IMX7_MMDC_ADDR = 0x80000000, - FSL_IMX7_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX7_MMDC_SIZE = (2 * GiB), - FSL_IMX7_GPIO1_ADDR = 0x30200000, - FSL_IMX7_GPIO2_ADDR = 0x30210000, - FSL_IMX7_GPIO3_ADDR = 0x30220000, - FSL_IMX7_GPIO4_ADDR = 0x30230000, - FSL_IMX7_GPIO5_ADDR = 0x30240000, - FSL_IMX7_GPIO6_ADDR = 0x30250000, - FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX7_QSPI1_MEM_SIZE = (256 * MiB), - FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + FSL_IMX7_PCIE1_MEM_ADDR = 0x40000000, + FSL_IMX7_PCIE1_MEM_SIZE = (256 * MiB), - FSL_IMX7_WDOG1_ADDR = 0x30280000, - FSL_IMX7_WDOG2_ADDR = 0x30290000, - FSL_IMX7_WDOG3_ADDR = 0x302A0000, - FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_QSPI1_RX_BUF_ADDR = 0x34000000, + FSL_IMX7_QSPI1_RX_BUF_SIZE = (32 * MiB), - FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + /* PCIe Peripherals */ + FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_GPT1_ADDR = 0x302D0000, - FSL_IMX7_GPT2_ADDR = 0x302E0000, - FSL_IMX7_GPT3_ADDR = 0x302F0000, - FSL_IMX7_GPT4_ADDR = 0x30300000, + /* MMAP Peripherals */ + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x8000, - FSL_IMX7_IOMUXC_ADDR = 0x30330000, - FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, - FSL_IMX7_IOMUXCn_SIZE = 0x1000, + /* GPV configuration */ + FSL_IMX7_GPV6_ADDR = 0x32600000, + FSL_IMX7_GPV5_ADDR = 0x32500000, + FSL_IMX7_GPV4_ADDR = 0x32400000, + FSL_IMX7_GPV3_ADDR = 0x32300000, + FSL_IMX7_GPV2_ADDR = 0x32200000, + FSL_IMX7_GPV1_ADDR = 0x32100000, + FSL_IMX7_GPV0_ADDR = 0x32000000, + FSL_IMX7_GPVn_SIZE = (1 * MiB), - FSL_IMX7_OCOTP_ADDR = 0x30350000, - FSL_IMX7_OCOTP_SIZE = 0x10000, + /* Arm Peripherals */ + FSL_IMX7_A7MPCORE_ADDR = 0x31000000, - FSL_IMX7_ANALOG_ADDR = 0x30360000, - FSL_IMX7_SNVS_ADDR = 0x30370000, - FSL_IMX7_CCM_ADDR = 0x30380000, + /* AIPS-3 Begin */ - FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = 0x1000, + FSL_IMX7_ENET2_ADDR = 0x30BF0000, + FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ADC1_ADDR = 0x30610000, - FSL_IMX7_ADC2_ADDR = 0x30620000, - FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_SDMA_ADDR = 0x30BD0000, + FSL_IMX7_SDMA_SIZE = (4 * KiB), - FSL_IMX7_PWM1_ADDR = 0x30660000, - FSL_IMX7_PWM2_ADDR = 0x30670000, - FSL_IMX7_PWM3_ADDR = 0x30680000, - FSL_IMX7_PWM4_ADDR = 0x30690000, - FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_EIM_ADDR = 0x30BC0000, + FSL_IMX7_EIM_SIZE = (4 * KiB), - FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, - FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_QSPI_ADDR = 0x30BB0000, + FSL_IMX7_QSPI_SIZE = 0x8000, - FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_SIM2_ADDR = 0x30BA0000, + FSL_IMX7_SIM1_ADDR = 0x30B90000, + FSL_IMX7_SIMn_SIZE = (4 * KiB), + + FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_USDHC2_ADDR = 0x30B50000, + FSL_IMX7_USDHC1_ADDR = 0x30B40000, + + FSL_IMX7_USB3_ADDR = 0x30B30000, + FSL_IMX7_USBMISC3_ADDR = 0x30B30200, + FSL_IMX7_USB2_ADDR = 0x30B20000, + FSL_IMX7_USBMISC2_ADDR = 0x30B20200, + FSL_IMX7_USB1_ADDR = 0x30B10000, + FSL_IMX7_USBMISC1_ADDR = 0x30B10200, + FSL_IMX7_USBMISCn_SIZE = 0x200, + + FSL_IMX7_USB_PL301_ADDR = 0x30AD0000, + FSL_IMX7_USB_PL301_SIZE = (64 * KiB), + + FSL_IMX7_SEMAPHORE_HS_ADDR = 0x30AC0000, + FSL_IMX7_SEMAPHORE_HS_SIZE = (64 * KiB), + + FSL_IMX7_MUB_ADDR = 0x30AB0000, + FSL_IMX7_MUA_ADDR = 0x30AA0000, + FSL_IMX7_MUn_SIZE = (KiB), + + FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART6_ADDR = 0x30A80000, + FSL_IMX7_UART5_ADDR = 0x30A70000, + FSL_IMX7_UART4_ADDR = 0x30A60000, + + FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_I2C3_ADDR = 0x30A40000, + FSL_IMX7_I2C2_ADDR = 0x30A30000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, + + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CANn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS3_CONF_ADDR = 0x309F0000, + FSL_IMX7_AIPS3_CONF_SIZE = (64 * KiB), FSL_IMX7_CAAM_ADDR = 0x30900000, - FSL_IMX7_CAAM_SIZE = 0x40000, + FSL_IMX7_CAAM_SIZE = (256 * KiB), - FSL_IMX7_CAN1_ADDR = 0x30A00000, - FSL_IMX7_CAN2_ADDR = 0x30A10000, - FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_SPBA_ADDR = 0x308F0000, + FSL_IMX7_SPBA_SIZE = (4 * KiB), - FSL_IMX7_I2C1_ADDR = 0x30A20000, - FSL_IMX7_I2C2_ADDR = 0x30A30000, - FSL_IMX7_I2C3_ADDR = 0x30A40000, - FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_SAI3_ADDR = 0x308C0000, + FSL_IMX7_SAI2_ADDR = 0x308B0000, + FSL_IMX7_SAI1_ADDR = 0x308A0000, + FSL_IMX7_SAIn_SIZE = (4 * KiB), - FSL_IMX7_ECSPI1_ADDR = 0x30820000, - FSL_IMX7_ECSPI2_ADDR = 0x30830000, - FSL_IMX7_ECSPI3_ADDR = 0x30840000, - FSL_IMX7_ECSPI4_ADDR = 0x30630000, - - FSL_IMX7_LCDIF_ADDR = 0x30730000, - FSL_IMX7_LCDIF_SIZE = 0x1000, - - FSL_IMX7_UART1_ADDR = 0x30860000, + FSL_IMX7_UART3_ADDR = 0x30880000, /* * Some versions of the reference manual claim that UART2 is @ * 0x30870000, but experiments with HW + DT files in upstream @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { * actually located @ 0x30890000 */ FSL_IMX7_UART2_ADDR = 0x30890000, - FSL_IMX7_UART3_ADDR = 0x30880000, - FSL_IMX7_UART4_ADDR = 0x30A60000, - FSL_IMX7_UART5_ADDR = 0x30A70000, - FSL_IMX7_UART6_ADDR = 0x30A80000, - FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART1_ADDR = 0x30860000, - FSL_IMX7_SAI1_ADDR = 0x308A0000, - FSL_IMX7_SAI2_ADDR = 0x308B0000, - FSL_IMX7_SAI3_ADDR = 0x308C0000, - FSL_IMX7_SAIn_SIZE = 0x10000, + FSL_IMX7_ECSPI3_ADDR = 0x30840000, + FSL_IMX7_ECSPI2_ADDR = 0x30830000, + FSL_IMX7_ECSPI1_ADDR = 0x30820000, + FSL_IMX7_ECSPIn_SIZE = (4 * KiB), - FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ENET2_ADDR = 0x30BF0000, + /* AIPS-3 End */ - FSL_IMX7_USB1_ADDR = 0x30B10000, - FSL_IMX7_USBMISC1_ADDR = 0x30B10200, - FSL_IMX7_USB2_ADDR = 0x30B20000, - FSL_IMX7_USBMISC2_ADDR = 0x30B20200, - FSL_IMX7_USB3_ADDR = 0x30B30000, - FSL_IMX7_USBMISC3_ADDR = 0x30B30200, - FSL_IMX7_USBMISCn_SIZE = 0x200, + /* AIPS-2 Begin */ - FSL_IMX7_USDHC1_ADDR = 0x30B40000, - FSL_IMX7_USDHC2_ADDR = 0x30B50000, - FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_AXI_DEBUG_MON_ADDR = 0x307E0000, + FSL_IMX7_AXI_DEBUG_MON_SIZE = (64 * KiB), - FSL_IMX7_SDMA_ADDR = 0x30BD0000, - FSL_IMX7_SDMA_SIZE = 0x1000, + FSL_IMX7_PERFMON2_ADDR = 0x307D0000, + FSL_IMX7_PERFMON1_ADDR = 0x307C0000, + FSL_IMX7_PERFMONn_SIZE = (64 * KiB), + + FSL_IMX7_DDRC_ADDR = 0x307A0000, + FSL_IMX7_DDRC_SIZE = (4 * KiB), + + FSL_IMX7_DDRC_PHY_ADDR = 0x30790000, + FSL_IMX7_DDRC_PHY_SIZE = (4 * KiB), + + FSL_IMX7_TZASC_ADDR = 0x30780000, + FSL_IMX7_TZASC_SIZE = (64 * KiB), + + FSL_IMX7_MIPI_DSI_ADDR = 0x30760000, + FSL_IMX7_MIPI_DSI_SIZE = (4 * KiB), + + FSL_IMX7_MIPI_CSI_ADDR = 0x30750000, + FSL_IMX7_MIPI_CSI_SIZE = 0x4000, + + FSL_IMX7_LCDIF_ADDR = 0x30730000, + FSL_IMX7_LCDIF_SIZE = 0x8000, + + FSL_IMX7_CSI_ADDR = 0x30710000, + FSL_IMX7_CSI_SIZE = (4 * KiB), + + FSL_IMX7_PXP_ADDR = 0x30700000, + FSL_IMX7_PXP_SIZE = 0x4000, + + FSL_IMX7_EPDC_ADDR = 0x306F0000, + FSL_IMX7_EPDC_SIZE = (4 * KiB), + + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = (4 * KiB), + + FSL_IMX7_SYSCNT_CTRL_ADDR = 0x306C0000, + FSL_IMX7_SYSCNT_CMP_ADDR = 0x306B0000, + FSL_IMX7_SYSCNT_RD_ADDR = 0x306A0000, + + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWMn_SIZE = (4 * KiB), + + FSL_IMX7_FlEXTIMER2_ADDR = 0x30650000, + FSL_IMX7_FlEXTIMER1_ADDR = 0x30640000, + FSL_IMX7_FLEXTIMERn_SIZE = (4 * KiB), + + FSL_IMX7_ECSPI4_ADDR = 0x30630000, + + FSL_IMX7_ADC2_ADDR = 0x30620000, + FSL_IMX7_ADC1_ADDR = 0x30610000, + FSL_IMX7_ADCn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS2_CONF_ADDR = 0x305F0000, + FSL_IMX7_AIPS2_CONF_SIZE = (64 * KiB), + + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + + FSL_IMX7_CSU_ADDR = 0x303E0000, + FSL_IMX7_CSU_SIZE = (64 * KiB), + + FSL_IMX7_RDC_ADDR = 0x303D0000, + FSL_IMX7_RDC_SIZE = (4 * KiB), + + FSL_IMX7_SEMAPHORE2_ADDR = 0x303C0000, + FSL_IMX7_SEMAPHORE1_ADDR = 0x303B0000, + FSL_IMX7_SEMAPHOREn_SIZE = (4 * KiB), + + FSL_IMX7_GPC_ADDR = 0x303A0000, + + FSL_IMX7_SRC_ADDR = 0x30390000, + FSL_IMX7_SRC_SIZE = (4 * KiB), + + FSL_IMX7_CCM_ADDR = 0x30380000, + + FSL_IMX7_SNVS_HP_ADDR = 0x30370000, + + FSL_IMX7_ANALOG_ADDR = 0x30360000, + + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + + FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, + FSL_IMX7_IOMUXC_GPR_SIZE = (4 * KiB), + + FSL_IMX7_IOMUXC_ADDR = 0x30330000, + FSL_IMX7_IOMUXC_SIZE = (4 * KiB), + + FSL_IMX7_KPP_ADDR = 0x30320000, + FSL_IMX7_KPP_SIZE = (4 * KiB), + + FSL_IMX7_ROMCP_ADDR = 0x30310000, + FSL_IMX7_ROMCP_SIZE = (4 * KiB), + + FSL_IMX7_GPT4_ADDR = 0x30300000, + FSL_IMX7_GPT3_ADDR = 0x302F0000, + FSL_IMX7_GPT2_ADDR = 0x302E0000, + FSL_IMX7_GPT1_ADDR = 0x302D0000, + + FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + FSL_IMX7_IOMUXC_LPSR_SIZE = (4 * KiB), + + FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_WDOG3_ADDR = 0x302A0000, + FSL_IMX7_WDOG2_ADDR = 0x30290000, + FSL_IMX7_WDOG1_ADDR = 0x30280000, + + FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + + FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_GPIO6_ADDR = 0x30250000, + FSL_IMX7_GPIO5_ADDR = 0x30240000, + FSL_IMX7_GPIO4_ADDR = 0x30230000, + FSL_IMX7_GPIO3_ADDR = 0x30220000, + FSL_IMX7_GPIO2_ADDR = 0x30210000, + FSL_IMX7_GPIO1_ADDR = 0x30200000, + + FSL_IMX7_AIPS1_CONF_ADDR = 0x301F0000, + FSL_IMX7_AIPS1_CONF_SIZE = (64 * KiB), - FSL_IMX7_A7MPCORE_ADDR = 0x31000000, FSL_IMX7_A7MPCORE_DAP_ADDR = 0x30000000, + FSL_IMX7_A7MPCORE_DAP_SIZE = (1 * MiB), - FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, + /* AIPS-1 End */ - FSL_IMX7_GPR_ADDR = 0x30340000, + FSL_IMX7_EIM_CS0_ADDR = 0x28000000, + FSL_IMX7_EIM_CS0_SIZE = (128 * MiB), - FSL_IMX7_DMA_APBH_ADDR = 0x33000000, - FSL_IMX7_DMA_APBH_SIZE = 0x2000, + FSL_IMX7_OCRAM_PXP_ADDR = 0x00940000, + FSL_IMX7_OCRAM_PXP_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_EPDC_ADDR = 0x00920000, + FSL_IMX7_OCRAM_EPDC_SIZE = (128 * KiB), + + FSL_IMX7_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX7_OCRAM_MEM_SIZE = (128 * KiB), + + FSL_IMX7_TCMU_ADDR = 0x00800000, + FSL_IMX7_TCMU_SIZE = (32 * KiB), + + FSL_IMX7_TCML_ADDR = 0x007F8000, + FSL_IMX7_TCML_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_S_ADDR = 0x00180000, + FSL_IMX7_OCRAM_S_SIZE = (32 * KiB), + + FSL_IMX7_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX7_CAAM_MEM_SIZE = (32 * KiB), + + FSL_IMX7_ROM_ADDR = 0x00000000, + FSL_IMX7_ROM_SIZE = (96 * KiB), }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) char name[NAME_SIZE]; int i; + /* + * CPUs + */ for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX7_NUM_CPUS); i++) { snprintf(name, NAME_SIZE, "cpu%d", i); object_initialize_child(obj, name, &s->cpu[i], @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) TYPE_A15MPCORE_PRIV); /* - * GPIOs 1 to 7 + * GPIOs */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } - + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); + /* + * PCIE + */ object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) return; } + /* + * CPUs + */ for (i = 0; i < smp_cpus; i++) { o = OBJECT(&s->cpu[i]); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX7_A7MPCORE_DAP_SIZE); /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPTn_IRQ[i])); } + /* + * GPIOs + */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = { FSL_IMX7_GPIO1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * IOMUXC and IOMUXC_LPSR */ - for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) { - static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = { - FSL_IMX7_IOMUXC_ADDR, - FSL_IMX7_IOMUXC_LPSR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i], - FSL_IMX7_IOMUXCn_SIZE); - } + create_unimplemented_device("iomuxc", FSL_IMX7_IOMUXC_ADDR, + FSL_IMX7_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_lspr", FSL_IMX7_IOMUXC_LPSR_ADDR, + FSL_IMX7_IOMUXC_LPSR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = { FSL_IMX7_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_SPIn_IRQ[i])); } + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = { FSL_IMX7_I2C1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * SNVS */ sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_HP_ADDR); /* * SRC @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_PWMS; i++) { + static const hwaddr FSL_IMX7_PWMn_ADDR[FSL_IMX7_NUM_PWMS] = { + FSL_IMX7_PWM1_ADDR, + FSL_IMX7_PWM2_ADDR, + FSL_IMX7_PWM3_ADDR, + FSL_IMX7_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX7_PWMn_ADDR[i], + FSL_IMX7_PWMn_SIZE); + } /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); - create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_CANS; i++) { + static const hwaddr FSL_IMX7_CANn_ADDR[FSL_IMX7_NUM_CANS] = { + FSL_IMX7_CAN1_ADDR, + FSL_IMX7_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX7_CANn_ADDR[i], + FSL_IMX7_CANn_SIZE); + } /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX7_SAI1_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI2_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI3_ADDR, FSL_IMX7_SAIn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_SAIS; i++) { + static const hwaddr FSL_IMX7_SAIn_ADDR[FSL_IMX7_NUM_SAIS] = { + FSL_IMX7_SAI1_ADDR, + FSL_IMX7_SAI2_ADDR, + FSL_IMX7_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX7_SAIn_ADDR[i], + FSL_IMX7_SAIn_SIZE); + } /* * OCOTP @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, FSL_IMX7_OCOTP_SIZE); + /* + * GPR + */ sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_IOMUXC_GPR_ADDR); + /* + * PCIE + */ sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ); sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq); - + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = { FSL_IMX7_USBMISC1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add various memory segments - OCRAM - OCRAM EPDC - OCRAM PXP - OCRAM S - ROM - CAAM Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: f887a3483996ba06d40bd62ffdfb0ecf68621987.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 7 +++++ hw/arm/fsl-imx7.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7GPRState gpr; ChipideaState usb[FSL_IMX7_NUM_USBS]; DesignwarePCIEHost pcie; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_epdc; + MemoryRegion ocram_pxp; + MemoryRegion ocram_s; + uint32_t phy_num[FSL_IMX7_NUM_ETHS]; bool phy_connected[FSL_IMX7_NUM_ETHS]; }; diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX7_CSU_ADDR, + FSL_IMX7_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX7_TZASC_ADDR, + FSL_IMX7_TZASC_SIZE); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx7.ocram", + FSL_IMX7_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * OCRAM EPDC memory + */ + memory_region_init_ram(&s->ocram_epdc, NULL, "imx7.ocram_epdc", + FSL_IMX7_OCRAM_EPDC_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_EPDC_ADDR, + &s->ocram_epdc); + + /* + * OCRAM PXP memory + */ + memory_region_init_ram(&s->ocram_pxp, NULL, "imx7.ocram_pxp", + FSL_IMX7_OCRAM_PXP_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_PXP_ADDR, + &s->ocram_pxp); + + /* + * OCRAM_S memory + */ + memory_region_init_ram(&s->ocram_s, NULL, "imx7.ocram_s", + FSL_IMX7_OCRAM_S_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_S_ADDR, + &s->ocram_s); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, OBJECT(dev), "imx7.rom", + FSL_IMX7_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, OBJECT(dev), "imx7.caam", + FSL_IMX7_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_CAAM_MEM_ADDR, + &s->caam); } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The SRC device is normally used to start the secondary CPU. When running Linux directly, QEMU is emulating a PSCI interface that UBOOT is installing at boot time and therefore the fact that the SRC device is unimplemented is hidden as Qemu respond directly to PSCI requets without using the SRC device. But if you try to run a more bare metal application (maybe uboot itself), then it is not possible to start the secondary CPU as the SRC is an unimplemented device. This patch adds the ability to start the secondary CPU through the SRC device so that you can use this feature in bare metal applications. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +- include/hw/misc/imx7_src.h | 66 +++++++++ hw/arm/fsl-imx7.c | 8 +- hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 6 files changed, 356 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" +#include "hw/misc/imx7_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7CCMState ccm; IMX7AnalogState analog; IMX7SNVSState snvs; + IMX7SRCState src; IMXGPCv2State gpcv2; IMXSPIState spi[FSL_IMX7_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX7_NUM_I2CS]; @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = (4 * KiB), FSL_IMX7_CCM_ADDR = 0x30380000, diff --git a/include/hw/misc/imx7_src.h b/include/hw/misc/imx7_src.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_src.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (C) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SRC_H +#define IMX7_SRC_H + +#include "hw/sysbus.h" +#include "qemu/bitops.h" +#include "qom/object.h" + +#define SRC_SCR 0 +#define SRC_A7RCR0 1 +#define SRC_A7RCR1 2 +#define SRC_M4RCR 3 +#define SRC_ERCR 5 +#define SRC_HSICPHY_RCR 7 +#define SRC_USBOPHY1_RCR 8 +#define SRC_USBOPHY2_RCR 9 +#define SRC_MPIPHY_RCR 10 +#define SRC_PCIEPHY_RCR 11 +#define SRC_SBMR1 22 +#define SRC_SRSR 23 +#define SRC_SISR 26 +#define SRC_SIMR 27 +#define SRC_SBMR2 28 +#define SRC_GPR1 29 +#define SRC_GPR2 30 +#define SRC_GPR3 31 +#define SRC_GPR4 32 +#define SRC_GPR5 33 +#define SRC_GPR6 34 +#define SRC_GPR7 35 +#define SRC_GPR8 36 +#define SRC_GPR9 37 +#define SRC_GPR10 38 +#define SRC_MAX 39 + +/* SRC_A7SCR1 */ +#define R_CORE1_ENABLE_SHIFT 1 +#define R_CORE1_ENABLE_LENGTH 1 +/* SRC_A7SCR0 */ +#define R_CORE1_RST_SHIFT 5 +#define R_CORE1_RST_LENGTH 1 +#define R_CORE0_RST_SHIFT 4 +#define R_CORE0_RST_LENGTH 1 + +#define TYPE_IMX7_SRC "imx7.src" +OBJECT_DECLARE_SIMPLE_TYPE(IMX7SRCState, IMX7_SRC) + +struct IMX7SRCState { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t regs[SRC_MAX]; +}; + +#endif /* IMX7_SRC_H */ diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * SRC + */ + object_initialize_child(obj, "src", &s->src, TYPE_IMX7_SRC); + /* * ECSPIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * SRC */ - create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX7_SRC_ADDR); /* * Watchdogs diff --git a/hw/misc/imx7_src.c b/hw/misc/imx7_src.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_src.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_src.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" +#include "qemu/module.h" +#include "target/arm/arm-powerctl.h" +#include "hw/core/cpu.h" +#include "hw/registerfields.h" + +#include "trace.h" + +static const char *imx7_src_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case SRC_SCR: + return "SRC_SCR"; + case SRC_A7RCR0: + return "SRC_A7RCR0"; + case SRC_A7RCR1: + return "SRC_A7RCR1"; + case SRC_M4RCR: + return "SRC_M4RCR"; + case SRC_ERCR: + return "SRC_ERCR"; + case SRC_HSICPHY_RCR: + return "SRC_HSICPHY_RCR"; + case SRC_USBOPHY1_RCR: + return "SRC_USBOPHY1_RCR"; + case SRC_USBOPHY2_RCR: + return "SRC_USBOPHY2_RCR"; + case SRC_PCIEPHY_RCR: + return "SRC_PCIEPHY_RCR"; + case SRC_SBMR1: + return "SRC_SBMR1"; + case SRC_SRSR: + return "SRC_SRSR"; + case SRC_SISR: + return "SRC_SISR"; + case SRC_SIMR: + return "SRC_SIMR"; + case SRC_SBMR2: + return "SRC_SBMR2"; + case SRC_GPR1: + return "SRC_GPR1"; + case SRC_GPR2: + return "SRC_GPR2"; + case SRC_GPR3: + return "SRC_GPR3"; + case SRC_GPR4: + return "SRC_GPR4"; + case SRC_GPR5: + return "SRC_GPR5"; + case SRC_GPR6: + return "SRC_GPR6"; + case SRC_GPR7: + return "SRC_GPR7"; + case SRC_GPR8: + return "SRC_GPR8"; + case SRC_GPR9: + return "SRC_GPR9"; + case SRC_GPR10: + return "SRC_GPR10"; + default: + sprintf(unknown, "%u ?", reg); + return unknown; + } +} + +static const VMStateDescription vmstate_imx7_src = { + .name = TYPE_IMX7_SRC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_src_reset(DeviceState *dev) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + /* Set reset values */ + s->regs[SRC_SCR] = 0xA0; + s->regs[SRC_SRSR] = 0x1; + s->regs[SRC_SIMR] = 0x1F; +} + +static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + + if (index < SRC_MAX) { + value = s->regs[index]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + } + + trace_imx7_src_read(imx7_src_reg_name(index), value); + + return value; +} + + +/* + * The reset is asynchronous so we need to defer clearing the reset + * bit until the work is completed. + */ + +struct SRCSCRResetInfo { + IMX7SRCState *s; + uint32_t reset_bit; +}; + +static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) +{ + struct SRCSCRResetInfo *ri = data.host_ptr; + IMX7SRCState *s = ri->s; + + assert(qemu_mutex_iothread_locked()); + + s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + g_free(ri); +} + +static void imx7_defer_clear_reset_bit(uint32_t cpuid, + IMX7SRCState *s, + uint32_t reset_shift) +{ + struct SRCSCRResetInfo *ri; + CPUState *cpu = arm_get_cpu_by_id(cpuid); + + if (!cpu) { + return; + } + + ri = g_new(struct SRCSCRResetInfo, 1); + ri->s = s; + ri->reset_bit = reset_shift; + + async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); +} + + +static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + long unsigned int change_mask; + uint32_t current_value = value; + + if (index >= SRC_MAX) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + return; + } + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + change_mask = s->regs[index] ^ (uint32_t)current_value; + + switch (index) { + case SRC_A7RCR0: + if (FIELD_EX32(change_mask, CORE0, RST)) { + arm_reset_cpu(0); + imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); + } + if (FIELD_EX32(change_mask, CORE1, RST)) { + arm_reset_cpu(1); + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + } + s->regs[index] = current_value; + break; + case SRC_A7RCR1: + /* + * On real hardware when the system reset controller starts a + * secondary CPU it runs through some boot ROM code which reads + * the SRC_GPRX registers controlling the start address and branches + * to it. + * Here we are taking a short cut and branching directly to the + * requested address (we don't want to run the boot ROM code inside + * QEMU) + */ + if (FIELD_EX32(change_mask, CORE1, ENABLE)) { + if (FIELD_EX32(current_value, CORE1, ENABLE)) { + /* CORE 1 is brought up */ + arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], + 3, false); + } else { + /* CORE 1 is shut down */ + arm_set_cpu_off(1); + } + /* We clear the reset bits as the processor changed state */ + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + clear_bit(R_CORE1_RST_SHIFT, &change_mask); + } + s->regs[index] = current_value; + break; + default: + s->regs[index] = current_value; + break; + } +} + +static const struct MemoryRegionOps imx7_src_ops = { + .read = imx7_src_read, + .write = imx7_src_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_src_realize(DeviceState *dev, Error **errp) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, + TYPE_IMX7_SRC, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); +} + +static void imx7_src_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx7_src_realize; + dc->reset = imx7_src_reset; + dc->vmsd = &vmstate_imx7_src; + dc->desc = "i.MX6 System Reset Controller"; +} + +static const TypeInfo imx7_src_info = { + .name = TYPE_IMX7_SRC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SRCState), + .class_init = imx7_src_class_init, +}; + +static void imx7_src_register_types(void) +{ + type_register_static(&imx7_src_info); +} + +type_init(imx7_src_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( 'imx6_src.c', 'imx6ul_ccm.c', 'imx7_ccm.c', + 'imx7_src.c', 'imx7_gpr.c', 'imx7_snvs.c', 'imx_ccm.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d" ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +# imx7_src.c +imx7_src_read(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +imx7_src_write(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 + # iotkit-sysinfo.c iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.34.1 The architecture requires (R_TYTWB) that an attempt to return from EL3 when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This enforces that the CPU can't ever be executing below EL3 with the NSE,NS bits indicating an invalid security state.) We were missing this check; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230807150618.101357-1-peter.maydell@linaro.org --- target/arm/tcg/helper-a64.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) spsr &= ~PSTATE_SS; } + /* + * FEAT_RME forbids return from EL3 with an invalid security state. + * We don't need an explicit check for FEAT_RME here because we enforce + * in scr_write() that you can't set the NSE bit without it. + */ + if (cur_el == 3 && (env->cp15.scr_el3 & (SCR_NS | SCR_NSE)) == SCR_NSE) { + goto illegal_return; + } + new_el = el_from_spsr(spsr); if (new_el == -1) { goto illegal_return; -- 2.34.1 In the m48t59 device we almost always use 64-bit arithmetic when dealing with time_t deltas. The one exception is in set_alarm(), which currently uses a plain 'int' to hold the difference between two time_t values. Switch to int64_t instead to avoid any possible overflow issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/m48t59.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/rtc/m48t59.c b/hw/rtc/m48t59.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/m48t59.c +++ b/hw/rtc/m48t59.c @@ -XXX,XX +XXX,XX @@ static void alarm_cb (void *opaque) static void set_alarm(M48t59State *NVRAM) { - int diff; + int64_t diff; if (NVRAM->alrm_timer != NULL) { timer_del(NVRAM->alrm_timer); diff = qemu_timedate_diff(&NVRAM->alarm) - NVRAM->time_offset; -- 2.34.1 In the twl92230 device, use int64_t for the two state fields sec_offset and alm_sec, because we set these to values that are either time_t or differences between two time_t values. These fields aren't saved in vmstate anywhere, so we can safely widen them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/twl92230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/rtc/twl92230.c b/hw/rtc/twl92230.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/twl92230.c +++ b/hw/rtc/twl92230.c @@ -XXX,XX +XXX,XX @@ struct MenelausState { struct tm tm; struct tm new; struct tm alm; - int sec_offset; - int alm_sec; + int64_t sec_offset; + int64_t alm_sec; int next_comp; } rtc; uint16_t rtc_next_vmstate; -- 2.34.1 In the aspeed_rtc device we store a difference between two time_t values in an 'int'. This is not really correct when time_t could be 64 bits. Enlarge the field to 'int64_t'. This is a migration compatibility break for the aspeed boards. While we are changing the vmstate, remove the accidental duplicate of the offset field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> --- include/hw/rtc/aspeed_rtc.h | 2 +- hw/rtc/aspeed_rtc.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/hw/rtc/aspeed_rtc.h b/include/hw/rtc/aspeed_rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/rtc/aspeed_rtc.h +++ b/include/hw/rtc/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ struct AspeedRtcState { qemu_irq irq; uint32_t reg[0x18]; - int offset; + int64_t offset; }; diff --git a/hw/rtc/aspeed_rtc.c b/hw/rtc/aspeed_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/aspeed_rtc.c +++ b/hw/rtc/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_rtc_ops = { static const VMStateDescription vmstate_aspeed_rtc = { .name = TYPE_ASPEED_RTC, - .version_id = 1, + .version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), - VMSTATE_INT32(offset, AspeedRtcState), - VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT64(offset, AspeedRtcState), VMSTATE_END_OF_LIST() } }; -- 2.34.1 The functions qemu_get_timedate() and qemu_timedate_diff() take and return a time offset as an integer. Coverity points out that means that when an RTC device implementation holds an offset as a time_t, as the m48t59 does, the time_t will get truncated. (CID 1507157, 1517772). The functions work with time_t internally, so make them use that type in their APIs. Note that this won't help any Y2038 issues where either the device model itself is keeping the offset in a 32-bit integer, or where the hardware under emulation has Y2038 or other rollover problems. If we missed any cases of the former then hopefully Coverity will warn us about them since after this patch we'd be truncating a time_t in assignments from qemu_timedate_diff().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- include/sysemu/rtc.h | 4 ++-- softmmu/rtc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sysemu/rtc.h b/include/sysemu/rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/rtc.h +++ b/include/sysemu/rtc.h @@ -XXX,XX +XXX,XX @@ * The behaviour of the clock whose value this function returns will * depend on the -rtc command line option passed by the user. */ -void qemu_get_timedate(struct tm *tm, int offset); +void qemu_get_timedate(struct tm *tm, time_t offset); /** * qemu_timedate_diff: Return difference between a struct tm and the RTC @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset); * a timestamp one hour further ahead than the current RTC time * then this function will return 3600. */ -int qemu_timedate_diff(struct tm *tm); +time_t qemu_timedate_diff(struct tm *tm); #endif diff --git a/softmmu/rtc.c b/softmmu/rtc.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/rtc.c +++ b/softmmu/rtc.c @@ -XXX,XX +XXX,XX @@ static time_t qemu_ref_timedate(QEMUClockType clock) return value; } -void qemu_get_timedate(struct tm *tm, int offset) +void qemu_get_timedate(struct tm *tm, time_t offset) { time_t ti = qemu_ref_timedate(rtc_clock); @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset) } } -int qemu_timedate_diff(struct tm *tm) +time_t qemu_timedate_diff(struct tm *tm) { time_t seconds; -- 2.34.1 Where architecturally one ARM_FEATURE_X flag implies another ARM_FEATURE_Y, we allow the CPU init function to only set X, and then set Y for it. Currently we do this in two places -- we set a few flags in arm_cpu_post_init() because we need them to decide which properties to create on the CPU object, and then we do the rest in arm_cpu_realizefn(). However, this is fragile, because it's easy to add a new property and not notice that this means that an X-implies-Y check now has to move from realize to post-init. As a specific example, the pmsav7-dregion property is conditional on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and rely on V8-implies-V7, which doesn't happen until the realizefn. Move all of these X-implies-Y checks into a new function, which we call at the top of arm_cpu_post_init(), so the feature bits are available at that point. This does now give us the reverse issue, that if there's a feature bit which is enabled or disabled by the setting of a property then then X-implies-Y features that are dependent on that property need to be in realize, not in this new function. But the only one of those is the "EL3 implies VBAR" which is already in the right place, so putting things this way round seems better to me. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org --- target/arm/cpu.c | 179 +++++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 82 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ unsigned int gt_cntfrq_period_ns(ARMCPU *cpu) NANOSECONDS_PER_SECOND / cpu->gt_cntfrq_hz : 1; } +static void arm_cpu_propagate_feature_implications(ARMCPU *cpu) +{ + CPUARMState *env = &cpu->env; + bool no_aa32 = false; + + /* + * Some features automatically imply others: set the feature + * bits explicitly for these cases. + */ + + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_PMSA); + } + + if (arm_feature(env, ARM_FEATURE_V8)) { + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V7); + } else { + set_feature(env, ARM_FEATURE_V7VE); + } + } + + /* + * There exist AArch64 cpus without AArch32 support. When KVM + * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. + * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. + * As a general principle, we also do not make ID register + * consistency checks anywhere unless using TCG, because only + * for TCG would a consistency-check failure be a QEMU bug. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); + } + + if (arm_feature(env, ARM_FEATURE_V7VE)) { + /* + * v7 Virtualization Extensions. In real hardware this implies + * EL2 and also the presence of the Security Extensions. + * For QEMU, for backwards-compatibility we implement some + * CPUs or CPU configs which have no actual EL2 or EL3 but do + * include the various other features that V7VE implies. + * Presence of EL2 itself is ARM_FEATURE_EL2, and of the + * Security Extensions is ARM_FEATURE_EL3. + */ + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_arm_div, cpu)); + set_feature(env, ARM_FEATURE_LPAE); + set_feature(env, ARM_FEATURE_V7); + } + if (arm_feature(env, ARM_FEATURE_V7)) { + set_feature(env, ARM_FEATURE_VAPA); + set_feature(env, ARM_FEATURE_THUMB2); + set_feature(env, ARM_FEATURE_MPIDR); + if (!arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V6K); + } else { + set_feature(env, ARM_FEATURE_V6); + } + + /* + * Always define VBAR for V7 CPUs even if it doesn't exist in + * non-EL3 configs. This is needed by some legacy boards. + */ + set_feature(env, ARM_FEATURE_VBAR); + } + if (arm_feature(env, ARM_FEATURE_V6K)) { + set_feature(env, ARM_FEATURE_V6); + set_feature(env, ARM_FEATURE_MVFR); + } + if (arm_feature(env, ARM_FEATURE_V6)) { + set_feature(env, ARM_FEATURE_V5); + if (!arm_feature(env, ARM_FEATURE_M)) { + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_jazelle, cpu)); + set_feature(env, ARM_FEATURE_AUXCR); + } + } + if (arm_feature(env, ARM_FEATURE_V5)) { + set_feature(env, ARM_FEATURE_V4T); + } + if (arm_feature(env, ARM_FEATURE_LPAE)) { + set_feature(env, ARM_FEATURE_V7MP); + } + if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { + set_feature(env, ARM_FEATURE_CBAR); + } + if (arm_feature(env, ARM_FEATURE_THUMB2) && + !arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_THUMB_DSP); + } +} + void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - /* M profile implies PMSA. We have to do this here rather than - * in realize with the other feature-implication checks because - * we look at the PMSA bit to see if we should add some properties. + /* + * Some features imply others. Figure this out now, because we + * are going to look at the feature bits in deciding which + * properties to add. */ - if (arm_feature(&cpu->env, ARM_FEATURE_M)) { - set_feature(&cpu->env, ARM_FEATURE_PMSA); - } + arm_cpu_propagate_feature_implications(cpu); if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) CPUARMState *env = &cpu->env; int pagebits; Error *local_err = NULL; - bool no_aa32 = false; /* Use pc-relative instructions in system-mode */ #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->isar.id_isar3 = u; } - /* Some features automatically imply others: */ - if (arm_feature(env, ARM_FEATURE_V8)) { - if (arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V7); - } else { - set_feature(env, ARM_FEATURE_V7VE); - } - } - - /* - * There exist AArch64 cpus without AArch32 support. When KVM - * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. - * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. - * As a general principle, we also do not make ID register - * consistency checks anywhere unless using TCG, because only - * for TCG would a consistency-check failure be a QEMU bug. - */ - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { - no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); - } - - if (arm_feature(env, ARM_FEATURE_V7VE)) { - /* v7 Virtualization Extensions. In real hardware this implies - * EL2 and also the presence of the Security Extensions. - * For QEMU, for backwards-compatibility we implement some - * CPUs or CPU configs which have no actual EL2 or EL3 but do - * include the various other features that V7VE implies. - * Presence of EL2 itself is ARM_FEATURE_EL2, and of the - * Security Extensions is ARM_FEATURE_EL3. - */ - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_arm_div, cpu)); - set_feature(env, ARM_FEATURE_LPAE); - set_feature(env, ARM_FEATURE_V7); - } - if (arm_feature(env, ARM_FEATURE_V7)) { - set_feature(env, ARM_FEATURE_VAPA); - set_feature(env, ARM_FEATURE_THUMB2); - set_feature(env, ARM_FEATURE_MPIDR); - if (!arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V6K); - } else { - set_feature(env, ARM_FEATURE_V6); - } - - /* Always define VBAR for V7 CPUs even if it doesn't exist in - * non-EL3 configs. This is needed by some legacy boards. - */ - set_feature(env, ARM_FEATURE_VBAR); - } - if (arm_feature(env, ARM_FEATURE_V6K)) { - set_feature(env, ARM_FEATURE_V6); - set_feature(env, ARM_FEATURE_MVFR); - } - if (arm_feature(env, ARM_FEATURE_V6)) { - set_feature(env, ARM_FEATURE_V5); - if (!arm_feature(env, ARM_FEATURE_M)) { - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_jazelle, cpu)); - set_feature(env, ARM_FEATURE_AUXCR); - } - } - if (arm_feature(env, ARM_FEATURE_V5)) { - set_feature(env, ARM_FEATURE_V4T); - } - if (arm_feature(env, ARM_FEATURE_LPAE)) { - set_feature(env, ARM_FEATURE_V7MP); - } - if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { - set_feature(env, ARM_FEATURE_CBAR); - } - if (arm_feature(env, ARM_FEATURE_THUMB2) && - !arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_THUMB_DSP); - } /* * We rely on no XScale CPU having VFP so we can use the same bits in the -- 2.34.1 M-profile CPUs generally allow configuration of the number of MPU regions that they have. We don't currently model this, so our implementations of some of the board models provide CPUs with the wrong number of regions. RTOSes like Zephyr that hardcode the expected number of regions may therefore not run on the model if they are set up to run on real hardware. Add properties mpu-ns-regions and mpu-s-regions to the ARMV7M object, matching the ability of hardware to configure the number of Secure and NonSecure regions separately. Our actual CPU implementation doesn't currently support that, and it happens that none of the MPS boards we model set the number of regions differently for Secure vs NonSecure, so we provide an interface to the boards and SoCs that won't need to change if we ever do add that functionality in future, but make it an error to configure the two properties to different values. (The property name on the CPU is the somewhat misnamed-for-M-profile "pmsav7-dregion", so we don't follow that naming convention for the properties here. The TRM doesn't say what the CPU configuration variable names are, so we pick something, and follow the lowercase convention we already have for properties here.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-3-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 8 ++++++++ hw/arm/armv7m.c | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ARMv7MState, ARMV7M) * + Property "vfp": enable VFP (forwarded to CPU object) * + Property "dsp": enable DSP (forwarded to CPU object) * + Property "enable-bitband": expose bitbanded IO + * + Property "mpu-ns-regions": number of Non-Secure MPU regions (forwarded + * to CPU object pmsav7-dregion property; default is whatever the default + * for the CPU is) + * + Property "mpu-s-regions": number of Secure MPU regions (default is + * whatever the default for the CPU is; must currently be set to the same + * value as mpu-ns-regions if the CPU implements the Security Extension) * + Clock input "refclk" is the external reference clock for the systick timers * + Clock input "cpuclk" is the main CPU clock */ @@ -XXX,XX +XXX,XX @@ struct ARMv7MState { Object *idau; uint32_t init_svtor; uint32_t init_nsvtor; + uint32_t mpu_ns_regions; + uint32_t mpu_s_regions; bool enable_bitband; bool start_powered_off; bool vfp; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) } } + /* + * Real M-profile hardware can be configured with a different number of + * MPU regions for Secure vs NonSecure. QEMU's CPU implementation doesn't + * support that yet, so catch attempts to select that. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + s->mpu_ns_regions != s->mpu_s_regions) { + error_setg(errp, + "mpu-ns-regions and mpu-s-regions properties must have the same value"); + return; + } + if (s->mpu_ns_regions != UINT_MAX && + object_property_find(OBJECT(s->cpu), "pmsav7-dregion")) { + if (!object_property_set_uint(OBJECT(s->cpu), "pmsav7-dregion", + s->mpu_ns_regions, errp)) { + return; + } + } + /* * Tell the CPU where the NVIC is; it will fail realize if it doesn't * have one. Similarly, tell the NVIC where its CPU is. @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { false), DEFINE_PROP_BOOL("vfp", ARMv7MState, vfp, true), DEFINE_PROP_BOOL("dsp", ARMv7MState, dsp, true), + DEFINE_PROP_UINT32("mpu-ns-regions", ARMv7MState, mpu_ns_regions, UINT_MAX), + DEFINE_PROP_UINT32("mpu-s-regions", ARMv7MState, mpu_s_regions, UINT_MAX), DEFINE_PROP_END_OF_LIST(), }; -- 2.34.1 The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The MPS2/MPS3 FPGA images don't override these except in the case of AN547, which uses 16 MPU regions. Define properties on the ARMSSE object for the MPU regions (using the same names as the documented RTL configuration settings, and following the pattern we already have for this device of using all-caps names as the RTL does), and set them in the board code. We don't actually need to override the default except on AN547, but it's simpler code to have the board code set them always rather than tracking which board subtypes want to set them to a non-default value separately from what that value is. Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524 we now correctly use 8 MPU regions, while mps3-an547 stays at its current 16 regions. It's possible some guest code wrongly depended on the previous incorrectly modeled number of memory regions. (Such guest code should ideally check the number of regions via the MPU_TYPE register.) The old behaviour can be obtained with additional -global arguments to QEMU: For mps2-an521 and mps2-an524: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16 For mps2-an505: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 NB that the way the implementation allows this use of -global is slightly fragile: if the board code explicitly sets the properties on the sse-200 object, this overrides the -global command line option. So we rely on: - the boards that need fixing all happen to use the SSE defaults - we can write the board code to only set the property if it is different from the default, rather than having all boards explicitly set the property - the board that does need to use a non-default value happens to need to set it to the same value (16) we previously used This works, but there are some kinds of refactoring of the mps2-tz.c code that would break the support for -global here. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 5 +++++ hw/arm/armsse.c | 16 ++++++++++++++++ hw/arm/mps2-tz.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an * SSE-200 both are present; CPU0 in an SSE-200 has neither. * Since the IoTKit has only one CPU, it does not have the CPU1_* properties. + * + QOM properties "CPU0_MPU_NS", "CPU0_MPU_S", "CPU1_MPU_NS" and "CPU1_MPU_S" + * which set the number of MPU regions on the CPUs. If there is only one + * CPU the CPU1 properties are not present. * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, * which are wired to its NVIC lines 32 .. n+32 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t exp_numirq; uint32_t sram_addr_width; uint32_t init_svtor; + uint32_t cpu_mpu_ns[SSE_MAX_CPUS]; + uint32_t cpu_mpu_s[SSE_MAX_CPUS]; bool cpu_fpu[SSE_MAX_CPUS]; bool cpu_dsp[SSE_MAX_CPUS]; }; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse200_properties[] = { DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], false), DEFINE_PROP_BOOL("CPU1_FPU", ARMSSE, cpu_fpu[1], true), DEFINE_PROP_BOOL("CPU1_DSP", ARMSSE, cpu_dsp[1], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), + DEFINE_PROP_UINT32("CPU1_MPU_NS", ARMSSE, cpu_mpu_ns[1], 8), + DEFINE_PROP_UINT32("CPU1_MPU_S", ARMSSE, cpu_mpu_s[1], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse300_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } } + if (!object_property_set_uint(cpuobj, "mpu-ns-regions", + s->cpu_mpu_ns[i], errp)) { + return; + } + if (!object_property_set_uint(cpuobj, "mpu-s-regions", + s->cpu_mpu_s[i], errp)) { + return; + } if (i > 0) { memory_region_add_subregion_overlap(&s->cpu_container[i], 0, diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineClass { int uart_overflow_irq; /* number of the combined UART overflow IRQ */ uint32_t init_svtor; /* init-svtor setting for SSE */ uint32_t sram_addr_width; /* SRAM_ADDR_WIDTH setting for SSE */ + uint32_t cpu0_mpu_ns; /* CPU0_MPU_NS setting for SSE */ + uint32_t cpu0_mpu_s; /* CPU0_MPU_S setting for SSE */ + uint32_t cpu1_mpu_ns; /* CPU1_MPU_NS setting for SSE */ + uint32_t cpu1_mpu_s; /* CPU1_MPU_S setting for SSE */ const RAMInfo *raminfo; const char *armsse_type; uint32_t boot_ram_size; /* size of ram at address 0; 0 == find in raminfo */ @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) #define MPS3_DDR_SIZE (2 * GiB) #endif +/* For cpu{0,1}_mpu_{ns,s}, means "leave at SSE's default value" */ +#define MPU_REGION_DEFAULT UINT32_MAX + static const uint32_t an505_oscclk[] = { 40000000, 24580000, @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq); qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor); + if (mmc->cpu0_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_NS", mmc->cpu0_mpu_ns); + } + if (mmc->cpu0_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_S", mmc->cpu0_mpu_s); + } + if (object_property_find(OBJECT(iotkitdev), "CPU1_MPU_NS")) { + if (mmc->cpu1_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_NS", mmc->cpu1_mpu_ns); + } + if (mmc->cpu1_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_S", mmc->cpu1_mpu_s); + } + } qdev_prop_set_uint32(iotkitdev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); @@ -XXX,XX +XXX,XX @@ static void mps2tz_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); mc->init = mps2tz_common_init; mc->reset = mps2_machine_reset; iic->check = mps2_tz_idau_check; + + /* Most machines leave these at the SSE defaults */ + mmc->cpu0_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu0_mpu_s = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_s = MPU_REGION_DEFAULT; } static void mps2tz_set_default_ram_info(MPS2TZMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3tz_an547_class_init(ObjectClass *oc, void *data) mmc->numirq = 96; mmc->uart_overflow_irq = 48; mmc->init_svtor = 0x00000000; + mmc->cpu0_mpu_s = mmc->cpu0_mpu_ns = 16; mmc->sram_addr_width = 21; mmc->raminfo = an547_raminfo; mmc->armsse_type = TYPE_SSE300; -- 2.34.1