target-arm queue for softfreeze: this is quite big as I was on holiday last week, so this is all just sneaking in under the wire. I particularly wanted to get Philippe's patches in before freeze as that sort of code-movement patchset is painful to have to rebase. thanks -- PMM The following changes since commit ae9108f8f0746ce64d02afb1a216153a50926132: Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-4.1-pull-request' into staging (2019-07-01 15:55:40 +0100) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20190701 for you to fetch changes up to 787a7e76c2e93a48c47b324fea592c9910a70483: target/arm: Declare some M-profile functions publicly (2019-07-01 17:29:01 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm/boot: fix direct kernel boot with initrd * hw/arm/msf2-som: Exit when the cpu is not the expected one * i.mx7: fix bugs in PCI controller needed to boot recent kernels * aspeed: add RTC device * aspeed: fix some timer device bugs * aspeed: add swift-bmc board * aspeed: vic: Add support for legacy register interface * aspeed: add aspeed-xdma device * Add new sbsa-ref board for aarch64 * target/arm: code refactoring in preparation for support of compilation with TCG disabled ---------------------------------------------------------------- Adriana Kobylak (1): aspeed: Add support for the swift-bmc board Andrew Jeffery (3): aspeed/timer: Status register contains reload for stopped timer aspeed/timer: Fix match calculations aspeed: vic: Add support for legacy register interface Andrew Jones (1): hw/arm/boot: fix direct kernel boot with initrd Andrey Smirnov (5): i.mx7d: Add no-op/unimplemented APBH DMA module i.mx7d: Add no-op/unimplemented PCIE PHY IP block pci: designware: Update MSI mapping unconditionally pci: designware: Update MSI mapping when MSI address changes i.mx7d: pci: Update PCI IRQ mapping to match HW Christian Svensson (1): aspeed/timer: Ensure positive muldiv delta Cédric Le Goater (7): aspeed: add a per SoC mapping for the interrupt space aspeed: add a per SoC mapping for the memory space aspeed: introduce a configurable number of CPU per machine aspeed: add support for multiple NICs aspeed: remove the "ram" link aspeed: add a RAM memory region container aspeed/smc: add a 'sdram_base' property Eddie James (1): hw/misc/aspeed_xdma: New device Hongbo Zhang (2): hw/arm: Add arm SBSA reference machine, skeleton part hw/arm: Add arm SBSA reference machine, devices part Jan Kiszka (1): hw/arm/virt: Add support for Cortex-A7 Joel Stanley (4): hw: timer: Add ASPEED RTC device hw/arm/aspeed: Add RTC to SoC aspeed/timer: Fix behaviour running Linux aspeed: Link SCU to the watchdog Philippe Mathieu-Daudé (19): hw/arm/msf2-som: Exit when the cpu is not the expected one target/arm: Makefile cleanup (Aarch64) target/arm: Makefile cleanup (ARM) target/arm: Makefile cleanup (KVM) target/arm: Makefile cleanup (softmmu) target/arm: Add copyright boilerplate target/arm/helper: Remove unused include target/arm: Fix multiline comment syntax target/arm: Fix coding style issues target/arm: Move CPU state dumping routines to cpu.c target/arm: Declare get_phys_addr() function publicly target/arm: Move TLB related routines to tlb_helper.c target/arm/vfp_helper: Move code around target/arm/vfp_helper: Extract vfp_set_fpscr_to_host() target/arm/vfp_helper: Extract vfp_set_fpscr_from_host() target/arm/vfp_helper: Restrict the SoftFloat use to TCG target/arm: Restrict PSCI to TCG target/arm: Declare arm_log_exception() function publicly target/arm: Declare some M-profile functions publicly Samuel Ortiz (1): target/arm: Move the DC ZVA helper into op_helper hw/arm/Makefile.objs | 1 + hw/misc/Makefile.objs | 1 + hw/timer/Makefile.objs | 2 +- target/arm/Makefile.objs | 24 +- include/hw/arm/aspeed_soc.h | 53 ++- include/hw/arm/fsl-imx7.h | 14 +- include/hw/misc/aspeed_xdma.h | 30 ++ include/hw/ssi/aspeed_smc.h | 3 + include/hw/timer/aspeed_rtc.h | 31 ++ include/hw/watchdog/wdt_aspeed.h | 1 + target/arm/cpu.h | 2 - target/arm/internals.h | 69 ++- target/arm/translate.h | 5 - hw/arm/aspeed.c | 76 +++- hw/arm/aspeed_soc.c | 262 +++++++++--- hw/arm/boot.c | 3 +- hw/arm/fsl-imx7.c | 11 + hw/arm/msf2-som.c | 1 + hw/arm/sbsa-ref.c | 806 ++++++++++++++++++++++++++++++++++++ hw/arm/virt.c | 1 + hw/intc/aspeed_vic.c | 105 +++-- hw/misc/aspeed_xdma.c | 165 ++++++++ hw/pci-host/designware.c | 18 +- hw/ssi/aspeed_smc.c | 1 + hw/timer/aspeed_rtc.c | 180 ++++++++ hw/timer/aspeed_timer.c | 76 ++-- hw/watchdog/wdt_aspeed.c | 20 + target/arm/cpu.c | 232 ++++++++++- target/arm/helper.c | 498 +++++++++------------- target/arm/op_helper.c | 262 ++++++------ target/arm/tlb_helper.c | 200 +++++++++ target/arm/translate-a64.c | 128 ------ target/arm/translate.c | 91 +--- target/arm/vfp_helper.c | 199 +++++---- MAINTAINERS | 8 + default-configs/aarch64-softmmu.mak | 1 + hw/arm/Kconfig | 14 + hw/misc/trace-events | 3 + hw/timer/trace-events | 4 + 39 files changed, 2675 insertions(+), 926 deletions(-) create mode 100644 include/hw/misc/aspeed_xdma.h create mode 100644 include/hw/timer/aspeed_rtc.h create mode 100644 hw/arm/sbsa-ref.c create mode 100644 hw/misc/aspeed_xdma.c create mode 100644 hw/timer/aspeed_rtc.c create mode 100644 target/arm/tlb_helper.c From: Andrew Jones <drjones@redhat.com> Fix the condition used to check whether the initrd fits into RAM; in some cases if an initrd was also passed on the command line we would get an error stating that it was too big to fit into RAM after the kernel. Despite the error the loader continued anyway, though, so also add an exit(1) when the initrd is actually too big. Fixes: 852dc64d665f ("hw/arm/boot: Diagnose layouts that put initrd or DTB off the end of RAM") Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190618125844.4863-1-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/boot.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hw/arm/boot.c b/hw/arm/boot.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -XXX,XX +XXX,XX @@ static void arm_setup_direct_kernel_boot(ARMCPU *cpu, info->initrd_filename); exit(1); } - if (info->initrd_start + initrd_size > info->ram_size) { + if (info->initrd_start + initrd_size > ram_end) { error_report("could not load initrd '%s': " "too big to fit into RAM after the kernel", info->initrd_filename); + exit(1); } } else { initrd_size = 0; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This machine correctly defines its default_cpu_type to cortex-m3 and report an error if the user requested another cpu_type, however it does not exit, and this can confuse users trying to use another core: $ qemu-system-arm -M emcraft-sf2 -cpu cortex-m4 -kernel test-m4.elf qemu-system-arm: This board can only be used with CPU cortex-m3-arm-cpu [output related to M3 core ...] The CPU is indeed a M3 core: (qemu) info qom-tree /machine (emcraft-sf2-machine) /unattached (container) /device[0] (msf2-soc) /armv7m (armv7m) /cpu (cortex-m3-arm-cpu) Add the missing exit() call to return to the shell. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 20190617160136.29930-1-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/msf2-som.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/msf2-som.c +++ b/hw/arm/msf2-som.c @@ -XXX,XX +XXX,XX @@ static void emcraft_sf2_s2s010_init(MachineState *machine) if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) { error_report("This board can only be used with CPU %s", mc->default_cpu_type); + exit(1); } memory_region_init_ram(ddr, NULL, "ddr-ram", DDR_SIZE, -- 2.20.1 From: Jan Kiszka <jan.kiszka@siemens.com> Allow cortex-a7 to be used with the virt board; it supports the v7VE features and there is no reason to deny this type. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: fc5404f7-4d1d-c28f-6e48-d8799c82acc0@web.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static const int a15irqmap[] = { }; static const char *valid_cpus[] = { + ARM_CPU_TYPE_NAME("cortex-a7"), ARM_CPU_TYPE_NAME("cortex-a15"), ARM_CPU_TYPE_NAME("cortex-a53"), ARM_CPU_TYPE_NAME("cortex-a57"), -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Instantiate no-op APBH DMA module. Needed to boot latest Linux kernel. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +++ hw/arm/fsl-imx7.c | 6 ++++++ 2 files changed, 9 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, FSL_IMX7_GPR_ADDR = 0x30340000, + + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x2000, }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("lcdif", FSL_IMX7_LCDIF_ADDR, FSL_IMX7_LCDIF_SIZE); + + /* + * DMA APBH + */ + create_unimplemented_device("dma-apbh", FSL_IMX7_DMA_APBH_ADDR, + FSL_IMX7_DMA_APBH_SIZE); } static void fsl_imx7_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Add no-op/unimplemented PCIE PHY IP block. Needed by new kernels to use PCIE. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +++ hw/arm/fsl-imx7.c | 5 +++++ 2 files changed, 8 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_ADC2_ADDR = 0x30620000, FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_I2C1_ADDR = 0x30A20000, diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("dma-apbh", FSL_IMX7_DMA_APBH_ADDR, FSL_IMX7_DMA_APBH_SIZE); + /* + * PCIe PHY + */ + create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, + FSL_IMX7_PCIE_PHY_SIZE); } static void fsl_imx7_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Expression to calculate update_msi_mapping in code handling writes to DESIGNWARE_PCIE_MSI_INTR0_ENABLE is missing an ! operator and should be: !!root->msi.intr[0].enable ^ !!val; so that MSI mapping is updated when enabled transitions from either "none" -> "any" or "any" -> "none". Since that register shouldn't be written to very often, change the code to update MSI mapping unconditionally instead of trying to fix the update_msi_mapping logic. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/pci-host/designware.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/designware.c +++ b/hw/pci-host/designware.c @@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, root->msi.base |= (uint64_t)val << 32; break; - case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: { - const bool update_msi_mapping = !root->msi.intr[0].enable ^ !!val; - + case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: root->msi.intr[0].enable = val; - - if (update_msi_mapping) { - designware_pcie_root_update_msi_mapping(root); - } + designware_pcie_root_update_msi_mapping(root); break; - } case DESIGNWARE_PCIE_MSI_INTR0_MASK: root->msi.intr[0].mask = val; -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> MSI mapping needs to be update when MSI address changes, so add the code to do so. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/pci-host/designware.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/designware.c +++ b/hw/pci-host/designware.c @@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, case DESIGNWARE_PCIE_MSI_ADDR_LO: root->msi.base &= 0xFFFFFFFF00000000ULL; root->msi.base |= val; + designware_pcie_root_update_msi_mapping(root); break; case DESIGNWARE_PCIE_MSI_ADDR_HI: root->msi.base &= 0x00000000FFFFFFFFULL; root->msi.base |= (uint64_t)val << 32; + designware_pcie_root_update_msi_mapping(root); break; case DESIGNWARE_PCIE_MSI_INTR0_ENABLE: -- 2.20.1 From: Andrey Smirnov <andrew.smirnov@gmail.com> Datasheet for i.MX7 is incorrect and i.MX7's PCI IRQ mapping matches that of i.MX6: * INTD/MSI 122 * INTC 123 * INTB 124 * INTA 125 Fix all of the relevant code to reflect that fact. Needed by latest Linux kernels. (Reference: Linux kernel commit 538d6e9d597584e80 from an NXP employee confirming that the datasheet is incorrect and with a report of a test against hardware.) Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added ref to kernel commit confirming the datasheet error] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 8 ++++---- hw/pci-host/designware.c | 6 ++++-- 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ enum FslIMX7IRQs { FSL_IMX7_USB2_IRQ = 42, FSL_IMX7_USB3_IRQ = 40, - FSL_IMX7_PCI_INTA_IRQ = 122, - FSL_IMX7_PCI_INTB_IRQ = 123, - FSL_IMX7_PCI_INTC_IRQ = 124, - FSL_IMX7_PCI_INTD_IRQ = 125, + FSL_IMX7_PCI_INTA_IRQ = 125, + FSL_IMX7_PCI_INTB_IRQ = 124, + FSL_IMX7_PCI_INTC_IRQ = 123, + FSL_IMX7_PCI_INTD_IRQ = 122, FSL_IMX7_UART7_IRQ = 126, diff --git a/hw/pci-host/designware.c b/hw/pci-host/designware.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/designware.c +++ b/hw/pci-host/designware.c @@ -XXX,XX +XXX,XX @@ #define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff) #define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C +#define DESIGNWARE_PCIE_IRQ_MSI 3 + static DesignwarePCIEHost * designware_pcie_root_to_host(DesignwarePCIERoot *root) { @@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_msi_write(void *opaque, hwaddr addr, root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable; if (root->msi.intr[0].status & ~root->msi.intr[0].mask) { - qemu_set_irq(host->pci.irqs[0], 1); + qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1); } } @@ -XXX,XX +XXX,XX @@ static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address, case DESIGNWARE_PCIE_MSI_INTR0_STATUS: root->msi.intr[0].status ^= val; if (!root->msi.intr[0].status) { - qemu_set_irq(host->pci.irqs[0], 0); + qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0); } break; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> This will simplify the definition of new SoCs, like the AST2600 which should use a different CPU and a different IRQ number layout. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 36 +++++++++++++++++++++++ hw/arm/aspeed_soc.c | 57 +++++++++++++++++++++++++++++++------ 2 files changed, 85 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { const char *fmc_typename; const char **spi_typename; int wdts_num; + const int *irqmap; } AspeedSoCInfo; typedef struct AspeedSoCClass { @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCClass { #define ASPEED_SOC_GET_CLASS(obj) \ OBJECT_GET_CLASS(AspeedSoCClass, (obj), TYPE_ASPEED_SOC) +enum { + ASPEED_IOMEM, + ASPEED_UART1, + ASPEED_UART2, + ASPEED_UART3, + ASPEED_UART4, + ASPEED_UART5, + ASPEED_VUART, + ASPEED_FMC, + ASPEED_SPI1, + ASPEED_SPI2, + ASPEED_VIC, + ASPEED_SDMC, + ASPEED_SCU, + ASPEED_ADC, + ASPEED_SRAM, + ASPEED_GPIO, + ASPEED_RTC, + ASPEED_TIMER1, + ASPEED_TIMER2, + ASPEED_TIMER3, + ASPEED_TIMER4, + ASPEED_TIMER5, + ASPEED_TIMER6, + ASPEED_TIMER7, + ASPEED_TIMER8, + ASPEED_WDT, + ASPEED_PWM, + ASPEED_LPC, + ASPEED_IBT, + ASPEED_I2C, + ASPEED_ETH1, + ASPEED_ETH2, +}; + #endif /* ASPEED_SOC_H */ diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ #define ASPEED_SOC_ETH1_BASE 0x1E660000 #define ASPEED_SOC_ETH2_BASE 0x1E680000 -static const int uart_irqs[] = { 9, 32, 33, 34, 10 }; -static const int timer_irqs[] = { 16, 17, 18, 35, 36, 37, 38, 39, }; +static const int aspeed_soc_ast2400_irqmap[] = { + [ASPEED_UART1] = 9, + [ASPEED_UART2] = 32, + [ASPEED_UART3] = 33, + [ASPEED_UART4] = 34, + [ASPEED_UART5] = 10, + [ASPEED_VUART] = 8, + [ASPEED_FMC] = 19, + [ASPEED_SDMC] = 0, + [ASPEED_SCU] = 21, + [ASPEED_ADC] = 31, + [ASPEED_GPIO] = 20, + [ASPEED_RTC] = 22, + [ASPEED_TIMER1] = 16, + [ASPEED_TIMER2] = 17, + [ASPEED_TIMER3] = 18, + [ASPEED_TIMER4] = 35, + [ASPEED_TIMER5] = 36, + [ASPEED_TIMER6] = 37, + [ASPEED_TIMER7] = 38, + [ASPEED_TIMER8] = 39, + [ASPEED_WDT] = 27, + [ASPEED_PWM] = 28, + [ASPEED_LPC] = 8, + [ASPEED_IBT] = 8, /* LPC */ + [ASPEED_I2C] = 12, + [ASPEED_ETH1] = 2, + [ASPEED_ETH2] = 3, +}; #define AST2400_SDRAM_BASE 0x40000000 #define AST2500_SDRAM_BASE 0x80000000 +/* AST2500 uses the same IRQs as the AST2400 */ +#define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap + static const hwaddr aspeed_soc_ast2400_spi_bases[] = { ASPEED_SOC_SPI_BASE }; static const char *aspeed_soc_ast2400_typenames[] = { "aspeed.smc.spi" }; @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, + .irqmap = aspeed_soc_ast2400_irqmap, }, { .name = "ast2400-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, + .irqmap = aspeed_soc_ast2400_irqmap, }, { .name = "ast2400", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, + .irqmap = aspeed_soc_ast2400_irqmap, }, { .name = "ast2500-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm1176"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .fmc_typename = "aspeed.smc.ast2500-fmc", .spi_typename = aspeed_soc_ast2500_typenames, .wdts_num = 3, + .irqmap = aspeed_soc_ast2500_irqmap, }, }; +static qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int ctrl) +{ + AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); + + return qdev_get_gpio_in(DEVICE(&s->vic), sc->info->irqmap[ctrl]); +} + static void aspeed_soc_init(Object *obj) { AspeedSoCState *s = ASPEED_SOC(obj); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE); - for (i = 0; i < ARRAY_SIZE(timer_irqs); i++) { - qemu_irq irq = qdev_get_gpio_in(DEVICE(&s->vic), timer_irqs[i]); + for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) { + qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i); sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq); } /* UART - attach an 8250 to the IO space as our UART5 */ if (serial_hd(0)) { - qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]); + qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5); serial_mm_init(get_system_memory(), ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2, uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE); sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0, - qdev_get_gpio_in(DEVICE(&s->vic), 12)); + aspeed_soc_get_irq(s, ASPEED_I2C)); /* FMC, The number of CS is set at the board level */ object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1, s->fmc.ctrl->flash_window_base); sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, - qdev_get_gpio_in(DEVICE(&s->vic), 19)); + aspeed_soc_get_irq(s, ASPEED_FMC)); /* SPI */ for (i = 0; i < sc->info->spis_num; i++) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0, - qdev_get_gpio_in(DEVICE(&s->vic), 2)); + aspeed_soc_get_irq(s, ASPEED_ETH1)); } static void aspeed_soc_class_init(ObjectClass *oc, void *data) -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> This will simplify the definition of new SoCs, like the AST2600 which should use a slightly different address space and have a different set of controllers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 4 +- hw/arm/aspeed.c | 8 +-- hw/arm/aspeed_soc.c | 117 ++++++++++++++++++++++-------------- 3 files changed, 78 insertions(+), 51 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { const char *name; const char *cpu_type; uint32_t silicon_rev; - hwaddr sdram_base; uint64_t sram_size; int spis_num; - const hwaddr *spi_bases; const char *fmc_typename; const char **spi_typename; int wdts_num; const int *irqmap; + const hwaddr *memmap; } AspeedSoCInfo; typedef struct AspeedSoCClass { @@ -XXX,XX +XXX,XX @@ enum { ASPEED_I2C, ASPEED_ETH1, ASPEED_ETH2, + ASPEED_SDRAM, }; #endif /* ASPEED_SOC_H */ diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size); - memory_region_add_subregion(get_system_memory(), sc->info->sdram_base, - &bmc->ram); + memory_region_add_subregion(get_system_memory(), + sc->info->memmap[ASPEED_SDRAM], &bmc->ram); object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram), &error_abort); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, "max_ram", max_ram_size - ram_size); memory_region_add_subregion(get_system_memory(), - sc->info->sdram_base + ram_size, + sc->info->memmap[ASPEED_SDRAM] + ram_size, &bmc->max_ram); aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, aspeed_board_binfo.initrd_filename = machine->initrd_filename; aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline; aspeed_board_binfo.ram_size = ram_size; - aspeed_board_binfo.loader_start = sc->info->sdram_base; + aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM]; if (cfg->i2c_init) { cfg->i2c_init(bmc); diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ #include "hw/i2c/aspeed_i2c.h" #include "net/net.h" -#define ASPEED_SOC_UART_5_BASE 0x00184000 #define ASPEED_SOC_IOMEM_SIZE 0x00200000 -#define ASPEED_SOC_IOMEM_BASE 0x1E600000 -#define ASPEED_SOC_FMC_BASE 0x1E620000 -#define ASPEED_SOC_SPI_BASE 0x1E630000 -#define ASPEED_SOC_SPI2_BASE 0x1E631000 -#define ASPEED_SOC_VIC_BASE 0x1E6C0000 -#define ASPEED_SOC_SDMC_BASE 0x1E6E0000 -#define ASPEED_SOC_SCU_BASE 0x1E6E2000 -#define ASPEED_SOC_SRAM_BASE 0x1E720000 -#define ASPEED_SOC_TIMER_BASE 0x1E782000 -#define ASPEED_SOC_WDT_BASE 0x1E785000 -#define ASPEED_SOC_I2C_BASE 0x1E78A000 -#define ASPEED_SOC_ETH1_BASE 0x1E660000 -#define ASPEED_SOC_ETH2_BASE 0x1E680000 + +static const hwaddr aspeed_soc_ast2400_memmap[] = { + [ASPEED_IOMEM] = 0x1E600000, + [ASPEED_FMC] = 0x1E620000, + [ASPEED_SPI1] = 0x1E630000, + [ASPEED_VIC] = 0x1E6C0000, + [ASPEED_SDMC] = 0x1E6E0000, + [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_ADC] = 0x1E6E9000, + [ASPEED_SRAM] = 0x1E720000, + [ASPEED_GPIO] = 0x1E780000, + [ASPEED_RTC] = 0x1E781000, + [ASPEED_TIMER1] = 0x1E782000, + [ASPEED_WDT] = 0x1E785000, + [ASPEED_PWM] = 0x1E786000, + [ASPEED_LPC] = 0x1E789000, + [ASPEED_IBT] = 0x1E789140, + [ASPEED_I2C] = 0x1E78A000, + [ASPEED_ETH1] = 0x1E660000, + [ASPEED_ETH2] = 0x1E680000, + [ASPEED_UART1] = 0x1E783000, + [ASPEED_UART5] = 0x1E784000, + [ASPEED_VUART] = 0x1E787000, + [ASPEED_SDRAM] = 0x40000000, +}; + +static const hwaddr aspeed_soc_ast2500_memmap[] = { + [ASPEED_IOMEM] = 0x1E600000, + [ASPEED_FMC] = 0x1E620000, + [ASPEED_SPI1] = 0x1E630000, + [ASPEED_SPI2] = 0x1E631000, + [ASPEED_VIC] = 0x1E6C0000, + [ASPEED_SDMC] = 0x1E6E0000, + [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_ADC] = 0x1E6E9000, + [ASPEED_SRAM] = 0x1E720000, + [ASPEED_GPIO] = 0x1E780000, + [ASPEED_RTC] = 0x1E781000, + [ASPEED_TIMER1] = 0x1E782000, + [ASPEED_WDT] = 0x1E785000, + [ASPEED_PWM] = 0x1E786000, + [ASPEED_LPC] = 0x1E789000, + [ASPEED_IBT] = 0x1E789140, + [ASPEED_I2C] = 0x1E78A000, + [ASPEED_ETH1] = 0x1E660000, + [ASPEED_ETH2] = 0x1E680000, + [ASPEED_UART1] = 0x1E783000, + [ASPEED_UART5] = 0x1E784000, + [ASPEED_VUART] = 0x1E787000, + [ASPEED_SDRAM] = 0x80000000, +}; static const int aspeed_soc_ast2400_irqmap[] = { [ASPEED_UART1] = 9, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = { [ASPEED_ETH2] = 3, }; -#define AST2400_SDRAM_BASE 0x40000000 -#define AST2500_SDRAM_BASE 0x80000000 - -/* AST2500 uses the same IRQs as the AST2400 */ #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap -static const hwaddr aspeed_soc_ast2400_spi_bases[] = { ASPEED_SOC_SPI_BASE }; static const char *aspeed_soc_ast2400_typenames[] = { "aspeed.smc.spi" }; - -static const hwaddr aspeed_soc_ast2500_spi_bases[] = { ASPEED_SOC_SPI_BASE, - ASPEED_SOC_SPI2_BASE}; static const char *aspeed_soc_ast2500_typenames[] = { "aspeed.smc.ast2500-spi1", "aspeed.smc.ast2500-spi2" }; @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .name = "ast2400-a0", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), .silicon_rev = AST2400_A0_SILICON_REV, - .sdram_base = AST2400_SDRAM_BASE, .sram_size = 0x8000, .spis_num = 1, - .spi_bases = aspeed_soc_ast2400_spi_bases, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, + .memmap = aspeed_soc_ast2400_memmap, }, { .name = "ast2400-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), .silicon_rev = AST2400_A1_SILICON_REV, - .sdram_base = AST2400_SDRAM_BASE, .sram_size = 0x8000, .spis_num = 1, - .spi_bases = aspeed_soc_ast2400_spi_bases, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, + .memmap = aspeed_soc_ast2400_memmap, }, { .name = "ast2400", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), .silicon_rev = AST2400_A0_SILICON_REV, - .sdram_base = AST2400_SDRAM_BASE, .sram_size = 0x8000, .spis_num = 1, - .spi_bases = aspeed_soc_ast2400_spi_bases, .fmc_typename = "aspeed.smc.fmc", .spi_typename = aspeed_soc_ast2400_typenames, .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, + .memmap = aspeed_soc_ast2400_memmap, }, { .name = "ast2500-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm1176"), .silicon_rev = AST2500_A1_SILICON_REV, - .sdram_base = AST2500_SDRAM_BASE, .sram_size = 0x9000, .spis_num = 2, - .spi_bases = aspeed_soc_ast2500_spi_bases, .fmc_typename = "aspeed.smc.ast2500-fmc", .spi_typename = aspeed_soc_ast2500_typenames, .wdts_num = 3, .irqmap = aspeed_soc_ast2500_irqmap, + .memmap = aspeed_soc_ast2500_memmap, }, }; @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) Error *err = NULL, *local_err = NULL; /* IO space */ - create_unimplemented_device("aspeed_soc.io", - ASPEED_SOC_IOMEM_BASE, ASPEED_SOC_IOMEM_SIZE); + create_unimplemented_device("aspeed_soc.io", sc->info->memmap[ASPEED_IOMEM], + ASPEED_SOC_IOMEM_SIZE); /* CPU */ object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - memory_region_add_subregion(get_system_memory(), ASPEED_SOC_SRAM_BASE, - &s->sram); + memory_region_add_subregion(get_system_memory(), + sc->info->memmap[ASPEED_SRAM], &s->sram); /* SCU */ object_property_set_bool(OBJECT(&s->scu), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, ASPEED_SOC_SCU_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->scu), 0, sc->info->memmap[ASPEED_SCU]); /* VIC */ object_property_set_bool(OBJECT(&s->vic), true, "realized", &err); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, ASPEED_SOC_VIC_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->vic), 0, sc->info->memmap[ASPEED_VIC]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0, qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ)); sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, ASPEED_SOC_TIMER_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->timerctrl), 0, + sc->info->memmap[ASPEED_TIMER1]); for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) { qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_TIMER1 + i); sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) /* UART - attach an 8250 to the IO space as our UART5 */ if (serial_hd(0)) { qemu_irq uart5 = aspeed_soc_get_irq(s, ASPEED_UART5); - serial_mm_init(get_system_memory(), - ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2, + serial_mm_init(get_system_memory(), sc->info->memmap[ASPEED_UART5], 2, uart5, 38400, serial_hd(0), DEVICE_LITTLE_ENDIAN); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, ASPEED_SOC_I2C_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c), 0, sc->info->memmap[ASPEED_I2C]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0, aspeed_soc_get_irq(s, ASPEED_I2C)); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, ASPEED_SOC_FMC_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 0, sc->info->memmap[ASPEED_FMC]); sysbus_mmio_map(SYS_BUS_DEVICE(&s->fmc), 1, s->fmc.ctrl->flash_window_base); sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0, @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, sc->info->spi_bases[i]); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, + sc->info->memmap[ASPEED_SPI1 + i]); sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 1, s->spi[i].ctrl->flash_window_base); } @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, ASPEED_SOC_SDMC_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->sdmc), 0, sc->info->memmap[ASPEED_SDMC]); /* Watch dog */ for (i = 0; i < sc->info->wdts_num; i++) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) return; } sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, - ASPEED_SOC_WDT_BASE + i * 0x20); + sc->info->memmap[ASPEED_WDT] + i * 0x20); } /* Net */ @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) error_propagate(errp, err); return; } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, ASPEED_SOC_ETH1_BASE); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, + sc->info->memmap[ASPEED_ETH1]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0, aspeed_soc_get_irq(s, ASPEED_ETH1)); } -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The RTC is modeled to provide time and date functionality. It is initialised at zero to match the hardware. There is no modelling of the alarm functionality, which includes the IRQ line. As there is no guest code to exercise this function that is acceptable for now. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190618165311.27066-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/Makefile.objs | 2 +- include/hw/timer/aspeed_rtc.h | 31 ++++++ hw/timer/aspeed_rtc.c | 180 ++++++++++++++++++++++++++++++++++ hw/timer/trace-events | 4 + 4 files changed, 216 insertions(+), 1 deletion(-) create mode 100644 include/hw/timer/aspeed_rtc.h create mode 100644 hw/timer/aspeed_rtc.c diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/Makefile.objs +++ b/hw/timer/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_MC146818RTC) += mc146818rtc.o obj-$(CONFIG_ALLWINNER_A10_PIT) += allwinner-a10-pit.o common-obj-$(CONFIG_STM32F2XX_TIMER) += stm32f2xx_timer.o -common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o +common-obj-$(CONFIG_ASPEED_SOC) += aspeed_timer.o aspeed_rtc.o common-obj-$(CONFIG_SUN4V_RTC) += sun4v-rtc.o common-obj-$(CONFIG_CMSDK_APB_TIMER) += cmsdk-apb-timer.o diff --git a/include/hw/timer/aspeed_rtc.h b/include/hw/timer/aspeed_rtc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED Real Time Clock + * Joel Stanley <joel@jms.id.au> + * + * Copyright 2019 IBM Corp + * SPDX-License-Identifier: GPL-2.0-or-later + */ +#ifndef ASPEED_RTC_H +#define ASPEED_RTC_H + +#include <stdint.h> + +#include "hw/hw.h" +#include "hw/irq.h" +#include "hw/sysbus.h" + +typedef struct AspeedRtcState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + qemu_irq irq; + + uint32_t reg[0x18]; + int offset; + +} AspeedRtcState; + +#define TYPE_ASPEED_RTC "aspeed.rtc" +#define ASPEED_RTC(obj) OBJECT_CHECK(AspeedRtcState, (obj), TYPE_ASPEED_RTC) + +#endif /* ASPEED_RTC_H */ diff --git a/hw/timer/aspeed_rtc.c b/hw/timer/aspeed_rtc.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/timer/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED Real Time Clock + * Joel Stanley <joel@jms.id.au> + * + * Copyright 2019 IBM Corp + * SPDX-License-Identifier: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "hw/timer/aspeed_rtc.h" +#include "qemu/log.h" +#include "qemu/timer.h" + +#include "trace.h" + +#define COUNTER1 (0x00 / 4) +#define COUNTER2 (0x04 / 4) +#define ALARM (0x08 / 4) +#define CONTROL (0x10 / 4) +#define ALARM_STATUS (0x14 / 4) + +#define RTC_UNLOCKED BIT(1) +#define RTC_ENABLED BIT(0) + +static void aspeed_rtc_calc_offset(AspeedRtcState *rtc) +{ + struct tm tm; + uint32_t year, cent; + uint32_t reg1 = rtc->reg[COUNTER1]; + uint32_t reg2 = rtc->reg[COUNTER2]; + + tm.tm_mday = (reg1 >> 24) & 0x1f; + tm.tm_hour = (reg1 >> 16) & 0x1f; + tm.tm_min = (reg1 >> 8) & 0x3f; + tm.tm_sec = (reg1 >> 0) & 0x3f; + + cent = (reg2 >> 16) & 0x1f; + year = (reg2 >> 8) & 0x7f; + tm.tm_mon = ((reg2 >> 0) & 0x0f) - 1; + tm.tm_year = year + (cent * 100) - 1900; + + rtc->offset = qemu_timedate_diff(&tm); +} + +static uint32_t aspeed_rtc_get_counter(AspeedRtcState *rtc, int r) +{ + uint32_t year, cent; + struct tm now; + + qemu_get_timedate(&now, rtc->offset); + + switch (r) { + case COUNTER1: + return (now.tm_mday << 24) | (now.tm_hour << 16) | + (now.tm_min << 8) | now.tm_sec; + case COUNTER2: + cent = (now.tm_year + 1900) / 100; + year = now.tm_year % 100; + return ((cent & 0x1f) << 16) | ((year & 0x7f) << 8) | + ((now.tm_mon + 1) & 0xf); + default: + g_assert_not_reached(); + } +} + +static uint64_t aspeed_rtc_read(void *opaque, hwaddr addr, + unsigned size) +{ + AspeedRtcState *rtc = opaque; + uint64_t val; + uint32_t r = addr >> 2; + + switch (r) { + case COUNTER1: + case COUNTER2: + if (rtc->reg[CONTROL] & RTC_ENABLED) { + rtc->reg[r] = aspeed_rtc_get_counter(rtc, r); + } + /* fall through */ + case CONTROL: + val = rtc->reg[r]; + break; + case ALARM: + case ALARM_STATUS: + default: + qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx "\n", __func__, addr); + return 0; + } + + trace_aspeed_rtc_read(addr, val); + + return val; +} + +static void aspeed_rtc_write(void *opaque, hwaddr addr, + uint64_t val, unsigned size) +{ + AspeedRtcState *rtc = opaque; + uint32_t r = addr >> 2; + + switch (r) { + case COUNTER1: + case COUNTER2: + if (!(rtc->reg[CONTROL] & RTC_UNLOCKED)) { + break; + } + /* fall through */ + case CONTROL: + rtc->reg[r] = val; + aspeed_rtc_calc_offset(rtc); + break; + case ALARM: + case ALARM_STATUS: + default: + qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx "\n", __func__, addr); + break; + } + trace_aspeed_rtc_write(addr, val); +} + +static void aspeed_rtc_reset(DeviceState *d) +{ + AspeedRtcState *rtc = ASPEED_RTC(d); + + rtc->offset = 0; + memset(rtc->reg, 0, sizeof(rtc->reg)); +} + +static const MemoryRegionOps aspeed_rtc_ops = { + .read = aspeed_rtc_read, + .write = aspeed_rtc_write, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static const VMStateDescription vmstate_aspeed_rtc = { + .name = TYPE_ASPEED_RTC, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), + VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_END_OF_LIST() + } +}; + +static void aspeed_rtc_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + AspeedRtcState *s = ASPEED_RTC(dev); + + sysbus_init_irq(sbd, &s->irq); + + memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_rtc_ops, s, + "aspeed-rtc", 0x18ULL); + sysbus_init_mmio(sbd, &s->iomem); +} + +static void aspeed_rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = aspeed_rtc_realize; + dc->vmsd = &vmstate_aspeed_rtc; + dc->reset = aspeed_rtc_reset; +} + +static const TypeInfo aspeed_rtc_info = { + .name = TYPE_ASPEED_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedRtcState), + .class_init = aspeed_rtc_class_init, +}; + +static void aspeed_rtc_register_types(void) +{ + type_register_static(&aspeed_rtc_info); +} + +type_init(aspeed_rtc_register_types) diff --git a/hw/timer/trace-events b/hw/timer/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/trace-events +++ b/hw/timer/trace-events @@ -XXX,XX +XXX,XX @@ cmsdk_apb_dualtimer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK A cmsdk_apb_dualtimer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" cmsdk_apb_dualtimer_reset(void) "CMSDK APB dualtimer: reset" +# hw/timer/aspeed-rtc.c +aspeed_rtc_read(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64 +aspeed_rtc_write(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64 + # sun4v-rtc.c sun4v_rtc_read(uint64_t addr, uint64_t value) "read: addr 0x%" PRIx64 " value 0x%" PRIx64 sun4v_rtc_write(uint64_t addr, uint64_t value) "write: addr 0x%" PRIx64 " value 0x%" PRIx64 -- 2.20.1 From: Joel Stanley <joel@jms.id.au> All systems have an RTC. The IRQ is hooked up but the model does not use it at this stage. There is no guest code that uses it, so this limitation is acceptable. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190618165311.27066-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 2 ++ hw/arm/aspeed_soc.c | 13 +++++++++++++ 2 files changed, 15 insertions(+) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/aspeed_scu.h" #include "hw/misc/aspeed_sdmc.h" #include "hw/timer/aspeed_timer.h" +#include "hw/timer/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" #include "hw/ssi/aspeed_smc.h" #include "hw/watchdog/wdt_aspeed.h" @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { ARMCPU cpu; MemoryRegion sram; AspeedVICState vic; + AspeedRtcState rtc; AspeedTimerCtrlState timerctrl; AspeedI2CState i2c; AspeedSCUState scu; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "vic", OBJECT(&s->vic), sizeof(s->vic), TYPE_ASPEED_VIC); + sysbus_init_child_obj(obj, "rtc", OBJECT(&s->rtc), sizeof(s->rtc), + TYPE_ASPEED_RTC); + sysbus_init_child_obj(obj, "timerctrl", OBJECT(&s->timerctrl), sizeof(s->timerctrl), TYPE_ASPEED_TIMER); object_property_add_const_link(OBJECT(&s->timerctrl), "scu", @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1, qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ)); + /* RTC */ + object_property_set_bool(OBJECT(&s->rtc), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, sc->info->memmap[ASPEED_RTC]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, + aspeed_soc_get_irq(s, ASPEED_RTC)); + /* Timer */ object_property_set_bool(OBJECT(&s->timerctrl), true, "realized", &err); if (err) { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The current models of the Aspeed SoCs only have one CPU but future ones will support SMP. Introduce a new num_cpus field at the SoC class level to define the number of available CPUs per SoC and also introduce a 'num-cpus' property to activate the CPUs configured for the machine. The max_cpus limit of the machine should depend on the SoC definition but, unfortunately, these values are not available when the machine class is initialized. This is the reason why we add a check on num_cpus in the AspeedSoC realize handler. SMP support will be activated when models for such SoCs are implemented. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-6-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 5 ++++- hw/arm/aspeed.c | 7 +++++-- hw/arm/aspeed_soc.c | 33 +++++++++++++++++++++++++++------ 3 files changed, 36 insertions(+), 9 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #define ASPEED_SPIS_NUM 2 #define ASPEED_WDTS_NUM 3 +#define ASPEED_CPUS_NUM 2 typedef struct AspeedSoCState { /*< private >*/ DeviceState parent; /*< public >*/ - ARMCPU cpu; + ARMCPU cpu[ASPEED_CPUS_NUM]; + uint32_t num_cpus; MemoryRegion sram; AspeedVICState vic; AspeedRtcState rtc; @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCInfo { int wdts_num; const int *irqmap; const hwaddr *memmap; + uint32_t num_cpus; } AspeedSoCInfo; typedef struct AspeedSoCClass { diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ #include "hw/misc/tmp105.h" #include "qemu/log.h" #include "sysemu/block-backend.h" +#include "sysemu/sysemu.h" #include "hw/loader.h" #include "qemu/error-report.h" #include "qemu/units.h" static struct arm_boot_info aspeed_board_binfo = { .board_id = -1, /* device-tree-only board */ - .nb_cpus = 1, }; struct AspeedBoardState { @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs", &error_abort); + object_property_set_int(OBJECT(&bmc->soc), smp_cpus, "num-cpus", + &error_abort); if (machine->kernel_filename) { /* * When booting with a -kernel command line there is no u-boot @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline; aspeed_board_binfo.ram_size = ram_size; aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM]; + aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus; if (cfg->i2c_init) { cfg->i2c_init(bmc); @@ -XXX,XX +XXX,XX @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->desc = board->desc; mc->init = aspeed_machine_init; - mc->max_cpus = 1; + mc->max_cpus = ASPEED_CPUS_NUM; mc->no_sdcard = 1; mc->no_floppy = 1; mc->no_cdrom = 1; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ #include "hw/char/serial.h" #include "qemu/log.h" #include "qemu/module.h" +#include "qemu/error-report.h" #include "hw/i2c/aspeed_i2c.h" #include "net/net.h" @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, + .num_cpus = 1, }, { .name = "ast2400-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, + .num_cpus = 1, }, { .name = "ast2400", .cpu_type = ARM_CPU_TYPE_NAME("arm926"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .wdts_num = 2, .irqmap = aspeed_soc_ast2400_irqmap, .memmap = aspeed_soc_ast2400_memmap, + .num_cpus = 1, }, { .name = "ast2500-a1", .cpu_type = ARM_CPU_TYPE_NAME("arm1176"), @@ -XXX,XX +XXX,XX @@ static const AspeedSoCInfo aspeed_socs[] = { .wdts_num = 3, .irqmap = aspeed_soc_ast2500_irqmap, .memmap = aspeed_soc_ast2500_memmap, + .num_cpus = 1, }, }; @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s); int i; - object_initialize_child(obj, "cpu", OBJECT(&s->cpu), sizeof(s->cpu), - sc->info->cpu_type, &error_abort, NULL); + for (i = 0; i < sc->info->num_cpus; i++) { + object_initialize_child(obj, "cpu[*]", OBJECT(&s->cpu[i]), + sizeof(s->cpu[i]), sc->info->cpu_type, + &error_abort, NULL); + } sysbus_init_child_obj(obj, "scu", OBJECT(&s->scu), sizeof(s->scu), TYPE_ASPEED_SCU); @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) create_unimplemented_device("aspeed_soc.io", sc->info->memmap[ASPEED_IOMEM], ASPEED_SOC_IOMEM_SIZE); + if (s->num_cpus > sc->info->num_cpus) { + warn_report("%s: invalid number of CPUs %d, using default %d", + sc->info->name, s->num_cpus, sc->info->num_cpus); + s->num_cpus = sc->info->num_cpus; + } + /* CPU */ - object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err); - if (err) { - error_propagate(errp, err); - return; + for (i = 0; i < s->num_cpus; i++) { + object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } } /* SRAM */ @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0, aspeed_soc_get_irq(s, ASPEED_ETH1)); } +static Property aspeed_soc_properties[] = { + DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), + DEFINE_PROP_END_OF_LIST(), +}; static void aspeed_soc_class_init(ObjectClass *oc, void *data) { @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_class_init(ObjectClass *oc, void *data) dc->realize = aspeed_soc_realize; /* Reason: Uses serial_hds and nd_table in realize() directly */ dc->user_creatable = false; + dc->props = aspeed_soc_properties; } static const TypeInfo aspeed_soc_type_info = { -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The Aspeed SoCs have two MACs. Extend the Aspeed model to support a second NIC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/aspeed_soc.h | 3 ++- hw/arm/aspeed_soc.c | 33 +++++++++++++++++++-------------- 2 files changed, 21 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #define ASPEED_SPIS_NUM 2 #define ASPEED_WDTS_NUM 3 #define ASPEED_CPUS_NUM 2 +#define ASPEED_MACS_NUM 2 typedef struct AspeedSoCState { /*< private >*/ @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedSMCState spi[ASPEED_SPIS_NUM]; AspeedSDMCState sdmc; AspeedWDTState wdt[ASPEED_WDTS_NUM]; - FTGMAC100State ftgmac100; + FTGMAC100State ftgmac100[ASPEED_MACS_NUM]; } AspeedSoCState; #define TYPE_ASPEED_SOC "aspeed-soc" diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sc->info->silicon_rev); } - sysbus_init_child_obj(obj, "ftgmac100", OBJECT(&s->ftgmac100), - sizeof(s->ftgmac100), TYPE_FTGMAC100); + for (i = 0; i < ASPEED_MACS_NUM; i++) { + sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), + sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); + } } static void aspeed_soc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } /* Net */ - qdev_set_nic_properties(DEVICE(&s->ftgmac100), &nd_table[0]); - object_property_set_bool(OBJECT(&s->ftgmac100), true, "aspeed", &err); - object_property_set_bool(OBJECT(&s->ftgmac100), true, "realized", - &local_err); - error_propagate(&err, local_err); - if (err) { - error_propagate(errp, err); - return; + for (i = 0; i < nb_nics; i++) { + qdev_set_nic_properties(DEVICE(&s->ftgmac100[i]), &nd_table[i]); + object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "aspeed", + &err); + object_property_set_bool(OBJECT(&s->ftgmac100[i]), true, "realized", + &local_err); + error_propagate(&err, local_err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, + sc->info->memmap[ASPEED_ETH1 + i]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, + aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); } - sysbus_mmio_map(SYS_BUS_DEVICE(&s->ftgmac100), 0, - sc->info->memmap[ASPEED_ETH1]); - sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100), 0, - aspeed_soc_get_irq(s, ASPEED_ETH1)); } static Property aspeed_soc_properties[] = { DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The Linux kernel driver was updated in commit 4451d3f59f2a ("clocksource/drivers/fttmr010: Fix set_next_event handler) to fix an issue observed on hardware: > RELOAD register is loaded into COUNT register when the aspeed timer > is enabled, which means the next event may be delayed because timer > interrupt won't be generated until <0xFFFFFFFF - current_count + > cycles>. When running under Qemu, the system appeared "laggy". The guest is now scheduling timer events too regularly, starving the host of CPU time. This patch modifies the timer model to attempt to schedule the timer expiry as the guest requests, but if we have missed the deadline we re interrupt and try again, which allows the guest to catch up. Provides expected behaviour with old and new guest code. Fixes: c04bd47db6b9 ("hw/timer: Add ASPEED timer device model") Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-8-clg@kaod.org [clg: - merged a fix from Andrew Jeffery <andrew@aj.id.au> "Fire interrupt on failure to meet deadline" https://lists.ozlabs.org/pipermail/openbmc/2019-January/014641.html - adapted commit log - checkpatch fixes ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 57 ++++++++++++++++++++++------------------- 1 file changed, 30 insertions(+), 27 deletions(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t calculate_time(struct AspeedTimer *t, uint32_t ticks) static uint64_t calculate_next(struct AspeedTimer *t) { - uint64_t next = 0; - uint32_t rate = calculate_rate(t); + uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + uint64_t next; - while (!next) { - /* We don't know the relationship between the values in the match - * registers, so sort using MAX/MIN/zero. We sort in that order as the - * timer counts down to zero. */ - uint64_t seq[] = { - calculate_time(t, MAX(t->match[0], t->match[1])), - calculate_time(t, MIN(t->match[0], t->match[1])), - calculate_time(t, 0), - }; - uint64_t reload_ns; - uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + /* + * We don't know the relationship between the values in the match + * registers, so sort using MAX/MIN/zero. We sort in that order as + * the timer counts down to zero. + */ - if (now < seq[0]) { - next = seq[0]; - } else if (now < seq[1]) { - next = seq[1]; - } else if (now < seq[2]) { - next = seq[2]; - } else if (t->reload) { - reload_ns = muldiv64(t->reload, NANOSECONDS_PER_SECOND, rate); - t->start = now - ((now - t->start) % reload_ns); - } else { - /* no reload value, return 0 */ - break; - } + next = calculate_time(t, MAX(t->match[0], t->match[1])); + if (now < next) { + return next; } - return next; + next = calculate_time(t, MIN(t->match[0], t->match[1])); + if (now < next) { + return next; + } + + next = calculate_time(t, 0); + if (now < next) { + return next; + } + + /* We've missed all deadlines, fire interrupt and try again */ + timer_del(&t->timer); + + if (timer_overflow_interrupt(t)) { + t->level = !t->level; + qemu_set_irq(t->irq, t->level); + } + + t->start = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); + return calculate_time(t, MAX(MAX(t->match[0], t->match[1]), 0)); } static void aspeed_timer_mod(AspeedTimer *t) -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> From the datasheet: This register stores the current status of counter #N. When timer enable bit TMC30[N * b] is disabled, the reload register will be loaded into this counter. When timer bit TMC30[N * b] is set, the counter will start to decrement. CPU can update this register value when enable bit is set. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-9-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_timer_get_value(AspeedTimer *t, int reg) switch (reg) { case TIMER_REG_STATUS: - value = calculate_ticks(t, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); + if (timer_enabled(t)) { + value = calculate_ticks(t, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); + } else { + value = t->reload; + } break; case TIMER_REG_RELOAD: value = t->reload; -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> If the match value exceeds reload then we don't want to include it in calculations for the next event. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-10-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static inline uint64_t calculate_time(struct AspeedTimer *t, uint32_t ticks) return t->start + delta_ns; } +static inline uint32_t calculate_match(struct AspeedTimer *t, int i) +{ + return t->match[i] < t->reload ? t->match[i] : 0; +} + static uint64_t calculate_next(struct AspeedTimer *t) { uint64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); @@ -XXX,XX +XXX,XX @@ static uint64_t calculate_next(struct AspeedTimer *t) * the timer counts down to zero. */ - next = calculate_time(t, MAX(t->match[0], t->match[1])); + next = calculate_time(t, MAX(calculate_match(t, 0), calculate_match(t, 1))); if (now < next) { return next; } - next = calculate_time(t, MIN(t->match[0], t->match[1])); + next = calculate_time(t, MIN(calculate_match(t, 0), calculate_match(t, 1))); if (now < next) { return next; } @@ -XXX,XX +XXX,XX @@ static uint64_t calculate_next(struct AspeedTimer *t) qemu_set_irq(t->irq, t->level); } + next = MAX(MAX(calculate_match(t, 0), calculate_match(t, 1)), 0); t->start = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); - return calculate_time(t, MAX(MAX(t->match[0], t->match[1]), 0)); + + return calculate_time(t, next); } static void aspeed_timer_mod(AspeedTimer *t) -- 2.20.1 From: Christian Svensson <bluecmd@google.com> If the host decrements the counter register that results in a negative delta. This is then passed to muldiv64 which only handles unsigned numbers resulting in bogus results. This fix ensures the delta being operated on is positive. Test case: kexec a kernel using aspeed_timer and it will freeze on the second bootup when the kernel initializes the timer. With this patch that no longer happens and the timer appears to run OK. Signed-off-by: Christian Svensson <bluecmd@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20190618165311.27066-12-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/timer/aspeed_timer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/hw/timer/aspeed_timer.c b/hw/timer/aspeed_timer.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/aspeed_timer.c +++ b/hw/timer/aspeed_timer.c @@ -XXX,XX +XXX,XX @@ static void aspeed_timer_set_value(AspeedTimerCtrlState *s, int timer, int reg, int64_t delta = (int64_t) value - (int64_t) calculate_ticks(t, now); uint32_t rate = calculate_rate(t); - t->start += muldiv64(delta, NANOSECONDS_PER_SECOND, rate); + if (delta >= 0) { + t->start += muldiv64(delta, NANOSECONDS_PER_SECOND, rate); + } else { + t->start -= muldiv64(-delta, NANOSECONDS_PER_SECOND, rate); + } aspeed_timer_mod(t); } break; -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> It has never been used as far as I can tell from the git history. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size); memory_region_add_subregion(get_system_memory(), sc->info->memmap[ASPEED_SDRAM], &bmc->ram); - object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram), - &error_abort); max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", &error_abort); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The RAM memory region is defined after the SoC is realized when the SDMC controller has checked that the defined RAM size for the machine is correct. This is problematic for controller models requiring a link on the RAM region, for DMA support in the SMC controller for instance. Introduce a container memory region for the RAM that we can link into the controllers early, before the SoC is realized. It will be populated with the RAM region after the checks have be done. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-14-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ static struct arm_boot_info aspeed_board_binfo = { struct AspeedBoardState { AspeedSoCState soc; + MemoryRegion ram_container; MemoryRegion ram; MemoryRegion max_ram; }; @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, ram_addr_t max_ram_size; bmc = g_new0(AspeedBoardState, 1); + + memory_region_init(&bmc->ram_container, NULL, "aspeed-ram-container", + UINT32_MAX); + object_initialize_child(OBJECT(machine), "soc", &bmc->soc, (sizeof(bmc->soc)), cfg->soc_name, &error_abort, NULL); @@ -XXX,XX +XXX,XX @@ static void aspeed_board_init(MachineState *machine, &error_abort); memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size); + memory_region_add_subregion(&bmc->ram_container, 0, &bmc->ram); memory_region_add_subregion(get_system_memory(), - sc->info->memmap[ASPEED_SDRAM], &bmc->ram); + sc->info->memmap[ASPEED_SDRAM], + &bmc->ram_container); max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size", &error_abort); memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL, "max_ram", max_ram_size - ram_size); - memory_region_add_subregion(get_system_memory(), - sc->info->memmap[ASPEED_SDRAM] + ram_size, - &bmc->max_ram); + memory_region_add_subregion(&bmc->ram_container, ram_size, &bmc->max_ram); aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort); aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort); -- 2.20.1 From: Cédric Le Goater <clg@kaod.org> The DRAM address of a DMA transaction depends on the DRAM base address of the SoC. Inform the SMC controller model with this value. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190618165311.27066-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/ssi/aspeed_smc.h | 3 +++ hw/arm/aspeed_soc.c | 6 ++++++ hw/ssi/aspeed_smc.c | 1 + 3 files changed, 10 insertions(+) diff --git a/include/hw/ssi/aspeed_smc.h b/include/hw/ssi/aspeed_smc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/ssi/aspeed_smc.h +++ b/include/hw/ssi/aspeed_smc.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSMCState { uint8_t r_timings; uint8_t conf_enable_w0; + /* for DMA support */ + uint64_t sdram_base; + AspeedSMCFlash *flashes; uint8_t snoop_index; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) aspeed_soc_get_irq(s, ASPEED_I2C)); /* FMC, The number of CS is set at the board level */ + object_property_set_int(OBJECT(&s->fmc), sc->info->memmap[ASPEED_SDRAM], + "sdram-base", &err); + if (err) { + error_propagate(errp, err); + return; + } object_property_set_bool(OBJECT(&s->fmc), true, "realized", &err); if (err) { error_propagate(errp, err); diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_aspeed_smc = { static Property aspeed_smc_properties[] = { DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1), + DEFINE_PROP_UINT64("sdram-base", AspeedSMCState, sdram_base, 0), DEFINE_PROP_END_OF_LIST(), }; -- 2.20.1 From: Adriana Kobylak <anoo@us.ibm.com> The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-20-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/aspeed.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -XXX,XX +XXX,XX @@ struct AspeedBoardState { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +/* Swift hardware value: 0xF11AD206 */ +#define SWIFT_BMC_HW_STRAP1 ( \ + AST2500_HW_STRAP1_DEFAULTS | \ + SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ + SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ + SCU_AST2500_HW_STRAP_UART_DEBUG | \ + SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ + SCU_H_PLL_BYPASS_EN | \ + SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ + SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) + /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 @@ -XXX,XX +XXX,XX @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc) i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32); } +static void swift_bmc_i2c_init(AspeedBoardState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60); + + /* The swift board expects a TMP275 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48); + /* The swift board expects a pca9551 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60); + + /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60); + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c); + /* The swift board expects a pca9539 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74); + + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c); + /* The swift board expects a pca9539 but a pca9552 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552", + 0x74); + + /* The swift board expects a TMP275 but a TMP105 is compatible */ + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48); + i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a); +} + static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc) { AspeedSoCState *soc = &bmc->soc; @@ -XXX,XX +XXX,XX @@ static const AspeedBoardConfig aspeed_boards[] = { .num_cs = 2, .i2c_init = romulus_bmc_i2c_init, .ram = 512 * MiB, + }, { + .name = MACHINE_TYPE_NAME("swift-bmc"), + .desc = "OpenPOWER Swift BMC (ARM1176)", + .soc_name = "ast2500-a1", + .hw_strap1 = SWIFT_BMC_HW_STRAP1, + .fmc_model = "mx66l1g45g", + .spi_model = "mx66l1g45g", + .num_cs = 2, + .i2c_init = swift_bmc_i2c_init, + .ram = 512 * MiB, }, { .name = MACHINE_TYPE_NAME("witherspoon-bmc"), .desc = "OpenPOWER Witherspoon BMC (ARM1176)", -- 2.20.1 From: Eddie James <eajames@linux.ibm.com> The XDMA engine embedded in the Aspeed SOCs performs PCI DMA operations between the SOC (acting as a BMC) and a host processor in a server. The XDMA engine exists on the AST2400, AST2500, and AST2600 SOCs, so enable it for all of those. Add trace events on the important register writes in the XDMA engine. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-21-clg@kaod.org [clg: - changed title ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/misc/Makefile.objs | 1 + include/hw/arm/aspeed_soc.h | 3 + include/hw/misc/aspeed_xdma.h | 30 +++++++ hw/arm/aspeed_soc.c | 17 ++++ hw/misc/aspeed_xdma.c | 165 ++++++++++++++++++++++++++++++++++ hw/misc/trace-events | 3 + 6 files changed, 219 insertions(+) create mode 100644 include/hw/misc/aspeed_xdma.h create mode 100644 hw/misc/aspeed_xdma.c diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_ARMSSE_MHU) += armsse-mhu.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_AUX) += auxbus.o +obj-$(CONFIG_ASPEED_SOC) += aspeed_xdma.o obj-$(CONFIG_ASPEED_SOC) += aspeed_scu.o aspeed_sdmc.o obj-$(CONFIG_MSF2) += msf2-sysreg.o obj-$(CONFIG_NRF51_SOC) += nrf51_rng.o diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/aspeed_soc.h +++ b/include/hw/arm/aspeed_soc.h @@ -XXX,XX +XXX,XX @@ #include "hw/intc/aspeed_vic.h" #include "hw/misc/aspeed_scu.h" #include "hw/misc/aspeed_sdmc.h" +#include "hw/misc/aspeed_xdma.h" #include "hw/timer/aspeed_timer.h" #include "hw/timer/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" @@ -XXX,XX +XXX,XX @@ typedef struct AspeedSoCState { AspeedTimerCtrlState timerctrl; AspeedI2CState i2c; AspeedSCUState scu; + AspeedXDMAState xdma; AspeedSMCState fmc; AspeedSMCState spi[ASPEED_SPIS_NUM]; AspeedSDMCState sdmc; @@ -XXX,XX +XXX,XX @@ enum { ASPEED_ETH1, ASPEED_ETH2, ASPEED_SDRAM, + ASPEED_XDMA, }; #endif /* ASPEED_SOC_H */ diff --git a/include/hw/misc/aspeed_xdma.h b/include/hw/misc/aspeed_xdma.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/aspeed_xdma.h @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED XDMA Controller + * Eddie James <eajames@linux.ibm.com> + * + * Copyright (C) 2019 IBM Corp. + * SPDX-License-Identifer: GPL-2.0-or-later + */ + +#ifndef ASPEED_XDMA_H +#define ASPEED_XDMA_H + +#include "hw/sysbus.h" + +#define TYPE_ASPEED_XDMA "aspeed.xdma" +#define ASPEED_XDMA(obj) OBJECT_CHECK(AspeedXDMAState, (obj), TYPE_ASPEED_XDMA) + +#define ASPEED_XDMA_NUM_REGS (ASPEED_XDMA_REG_SIZE / sizeof(uint32_t)) +#define ASPEED_XDMA_REG_SIZE 0x7C + +typedef struct AspeedXDMAState { + SysBusDevice parent; + + MemoryRegion iomem; + qemu_irq irq; + + char bmc_cmdq_readp_set; + uint32_t regs[ASPEED_XDMA_NUM_REGS]; +} AspeedXDMAState; + +#endif /* ASPEED_XDMA_H */ diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2400_memmap[] = { [ASPEED_VIC] = 0x1E6C0000, [ASPEED_SDMC] = 0x1E6E0000, [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_XDMA] = 0x1E6E7000, [ASPEED_ADC] = 0x1E6E9000, [ASPEED_SRAM] = 0x1E720000, [ASPEED_GPIO] = 0x1E780000, @@ -XXX,XX +XXX,XX @@ static const hwaddr aspeed_soc_ast2500_memmap[] = { [ASPEED_VIC] = 0x1E6C0000, [ASPEED_SDMC] = 0x1E6E0000, [ASPEED_SCU] = 0x1E6E2000, + [ASPEED_XDMA] = 0x1E6E7000, [ASPEED_ADC] = 0x1E6E9000, [ASPEED_SRAM] = 0x1E720000, [ASPEED_GPIO] = 0x1E780000, @@ -XXX,XX +XXX,XX @@ static const int aspeed_soc_ast2400_irqmap[] = { [ASPEED_I2C] = 12, [ASPEED_ETH1] = 2, [ASPEED_ETH2] = 3, + [ASPEED_XDMA] = 6, }; #define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sysbus_init_child_obj(obj, "ftgmac100[*]", OBJECT(&s->ftgmac100[i]), sizeof(s->ftgmac100[i]), TYPE_FTGMAC100); } + + sysbus_init_child_obj(obj, "xdma", OBJECT(&s->xdma), sizeof(s->xdma), + TYPE_ASPEED_XDMA); } static void aspeed_soc_realize(DeviceState *dev, Error **errp) @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0, aspeed_soc_get_irq(s, ASPEED_ETH1 + i)); } + + /* XDMA */ + object_property_set_bool(OBJECT(&s->xdma), true, "realized", &err); + if (err) { + error_propagate(errp, err); + return; + } + sysbus_mmio_map(SYS_BUS_DEVICE(&s->xdma), 0, + sc->info->memmap[ASPEED_XDMA]); + sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0, + aspeed_soc_get_irq(s, ASPEED_XDMA)); } static Property aspeed_soc_properties[] = { DEFINE_PROP_UINT32("num-cpus", AspeedSoCState, num_cpus, 0), diff --git a/hw/misc/aspeed_xdma.c b/hw/misc/aspeed_xdma.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/aspeed_xdma.c @@ -XXX,XX +XXX,XX @@ +/* + * ASPEED XDMA Controller + * Eddie James <eajames@linux.ibm.com> + * + * Copyright (C) 2019 IBM Corp + * SPDX-License-Identifer: GPL-2.0-or-later + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "hw/misc/aspeed_xdma.h" +#include "qapi/error.h" + +#include "trace.h" + +#define XDMA_BMC_CMDQ_ADDR 0x10 +#define XDMA_BMC_CMDQ_ENDP 0x14 +#define XDMA_BMC_CMDQ_WRP 0x18 +#define XDMA_BMC_CMDQ_W_MASK 0x0003FFFF +#define XDMA_BMC_CMDQ_RDP 0x1C +#define XDMA_BMC_CMDQ_RDP_MAGIC 0xEE882266 +#define XDMA_IRQ_ENG_CTRL 0x20 +#define XDMA_IRQ_ENG_CTRL_US_COMP BIT(4) +#define XDMA_IRQ_ENG_CTRL_DS_COMP BIT(5) +#define XDMA_IRQ_ENG_CTRL_W_MASK 0xBFEFF07F +#define XDMA_IRQ_ENG_STAT 0x24 +#define XDMA_IRQ_ENG_STAT_US_COMP BIT(4) +#define XDMA_IRQ_ENG_STAT_DS_COMP BIT(5) +#define XDMA_IRQ_ENG_STAT_RESET 0xF8000000 +#define XDMA_MEM_SIZE 0x1000 + +#define TO_REG(addr) ((addr) / sizeof(uint32_t)) + +static uint64_t aspeed_xdma_read(void *opaque, hwaddr addr, unsigned int size) +{ + uint32_t val = 0; + AspeedXDMAState *xdma = opaque; + + if (addr < ASPEED_XDMA_REG_SIZE) { + val = xdma->regs[TO_REG(addr)]; + } + + return (uint64_t)val; +} + +static void aspeed_xdma_write(void *opaque, hwaddr addr, uint64_t val, + unsigned int size) +{ + unsigned int idx; + uint32_t val32 = (uint32_t)val; + AspeedXDMAState *xdma = opaque; + + if (addr >= ASPEED_XDMA_REG_SIZE) { + return; + } + + switch (addr) { + case XDMA_BMC_CMDQ_ENDP: + xdma->regs[TO_REG(addr)] = val32 & XDMA_BMC_CMDQ_W_MASK; + break; + case XDMA_BMC_CMDQ_WRP: + idx = TO_REG(addr); + xdma->regs[idx] = val32 & XDMA_BMC_CMDQ_W_MASK; + xdma->regs[TO_REG(XDMA_BMC_CMDQ_RDP)] = xdma->regs[idx]; + + trace_aspeed_xdma_write(addr, val); + + if (xdma->bmc_cmdq_readp_set) { + xdma->bmc_cmdq_readp_set = 0; + } else { + xdma->regs[TO_REG(XDMA_IRQ_ENG_STAT)] |= + XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP; + + if (xdma->regs[TO_REG(XDMA_IRQ_ENG_CTRL)] & + (XDMA_IRQ_ENG_CTRL_US_COMP | XDMA_IRQ_ENG_CTRL_DS_COMP)) + qemu_irq_raise(xdma->irq); + } + break; + case XDMA_BMC_CMDQ_RDP: + trace_aspeed_xdma_write(addr, val); + + if (val32 == XDMA_BMC_CMDQ_RDP_MAGIC) { + xdma->bmc_cmdq_readp_set = 1; + } + break; + case XDMA_IRQ_ENG_CTRL: + xdma->regs[TO_REG(addr)] = val32 & XDMA_IRQ_ENG_CTRL_W_MASK; + break; + case XDMA_IRQ_ENG_STAT: + trace_aspeed_xdma_write(addr, val); + + idx = TO_REG(addr); + if (val32 & (XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP)) { + xdma->regs[idx] &= + ~(XDMA_IRQ_ENG_STAT_US_COMP | XDMA_IRQ_ENG_STAT_DS_COMP); + qemu_irq_lower(xdma->irq); + } + break; + default: + xdma->regs[TO_REG(addr)] = val32; + break; + } +} + +static const MemoryRegionOps aspeed_xdma_ops = { + .read = aspeed_xdma_read, + .write = aspeed_xdma_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid.min_access_size = 4, + .valid.max_access_size = 4, +}; + +static void aspeed_xdma_realize(DeviceState *dev, Error **errp) +{ + SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + AspeedXDMAState *xdma = ASPEED_XDMA(dev); + + sysbus_init_irq(sbd, &xdma->irq); + memory_region_init_io(&xdma->iomem, OBJECT(xdma), &aspeed_xdma_ops, xdma, + TYPE_ASPEED_XDMA, XDMA_MEM_SIZE); + sysbus_init_mmio(sbd, &xdma->iomem); +} + +static void aspeed_xdma_reset(DeviceState *dev) +{ + AspeedXDMAState *xdma = ASPEED_XDMA(dev); + + xdma->bmc_cmdq_readp_set = 0; + memset(xdma->regs, 0, ASPEED_XDMA_REG_SIZE); + xdma->regs[TO_REG(XDMA_IRQ_ENG_STAT)] = XDMA_IRQ_ENG_STAT_RESET; + + qemu_irq_lower(xdma->irq); +} + +static const VMStateDescription aspeed_xdma_vmstate = { + .name = TYPE_ASPEED_XDMA, + .version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, AspeedXDMAState, ASPEED_XDMA_NUM_REGS), + VMSTATE_END_OF_LIST(), + }, +}; + +static void aspeed_xdma_class_init(ObjectClass *classp, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(classp); + + dc->realize = aspeed_xdma_realize; + dc->reset = aspeed_xdma_reset; + dc->vmsd = &aspeed_xdma_vmstate; +} + +static const TypeInfo aspeed_xdma_info = { + .name = TYPE_ASPEED_XDMA, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(AspeedXDMAState), + .class_init = aspeed_xdma_class_init, +}; + +static void aspeed_xdma_register_type(void) +{ + type_register_static(&aspeed_xdma_info); +} +type_init(aspeed_xdma_register_type); diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ armsse_cpuid_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 CPU_I # armsse-mhu.c armsse_mhu_read(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" + +# aspeed_xdma.c +aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64 -- 2.20.1 From: Andrew Jeffery <andrew@aj.id.au> The legacy interface only supported up to 32 IRQs, which became restrictive around the AST2400 generation. QEMU support for the SoCs started with the AST2400 along with an effort to reimplement and upstream drivers for Linux, so up until this point the consumers of the QEMU ASPEED support only required the 64 IRQ register interface. In an effort to support older BMC firmware, add support for the 32 IRQ interface. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-22-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/intc/aspeed_vic.c | 105 ++++++++++++++++++++++++++----------------- 1 file changed, 63 insertions(+), 42 deletions(-) diff --git a/hw/intc/aspeed_vic.c b/hw/intc/aspeed_vic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/aspeed_vic.c +++ b/hw/intc/aspeed_vic.c @@ -XXX,XX +XXX,XX @@ static void aspeed_vic_set_irq(void *opaque, int irq, int level) static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size) { - uint64_t val; - const bool high = !!(offset & 0x4); - hwaddr n_offset = (offset & ~0x4); AspeedVICState *s = (AspeedVICState *)opaque; + hwaddr n_offset; + uint64_t val; + bool high; if (offset < AVIC_NEW_BASE_OFFSET) { - qemu_log_mask(LOG_UNIMP, "%s: Ignoring read from legacy registers " - "at 0x%" HWADDR_PRIx "[%u]\n", __func__, offset, size); - return 0; + high = false; + n_offset = offset; + } else { + high = !!(offset & 0x4); + n_offset = (offset & ~0x4); } - n_offset -= AVIC_NEW_BASE_OFFSET; - switch (n_offset) { - case 0x0: /* IRQ Status */ + case 0x80: /* IRQ Status */ + case 0x00: val = s->raw & ~s->select & s->enable; break; - case 0x08: /* FIQ Status */ + case 0x88: /* FIQ Status */ + case 0x04: val = s->raw & s->select & s->enable; break; - case 0x10: /* Raw Interrupt Status */ + case 0x90: /* Raw Interrupt Status */ + case 0x08: val = s->raw; break; - case 0x18: /* Interrupt Selection */ + case 0x98: /* Interrupt Selection */ + case 0x0c: val = s->select; break; - case 0x20: /* Interrupt Enable */ + case 0xa0: /* Interrupt Enable */ + case 0x10: val = s->enable; break; - case 0x30: /* Software Interrupt */ + case 0xb0: /* Software Interrupt */ + case 0x18: val = s->trigger; break; - case 0x40: /* Interrupt Sensitivity */ + case 0xc0: /* Interrupt Sensitivity */ + case 0x24: val = s->sense; break; - case 0x48: /* Interrupt Both Edge Trigger Control */ + case 0xc8: /* Interrupt Both Edge Trigger Control */ + case 0x28: val = s->dual_edge; break; - case 0x50: /* Interrupt Event */ + case 0xd0: /* Interrupt Event */ + case 0x2c: val = s->event; break; - case 0x60: /* Edge Triggered Interrupt Status */ + case 0xe0: /* Edge Triggered Interrupt Status */ val = s->raw & ~s->sense; break; /* Illegal */ - case 0x28: /* Interrupt Enable Clear */ - case 0x38: /* Software Interrupt Clear */ - case 0x58: /* Edge Triggered Interrupt Clear */ + case 0xa8: /* Interrupt Enable Clear */ + case 0xb8: /* Software Interrupt Clear */ + case 0xd8: /* Edge Triggered Interrupt Clear */ qemu_log_mask(LOG_GUEST_ERROR, "%s: Read of write-only register with offset 0x%" HWADDR_PRIx "\n", __func__, offset); @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size) } if (high) { val = extract64(val, 32, 19); + } else { + val = extract64(val, 0, 32); } trace_aspeed_vic_read(offset, size, val); return val; @@ -XXX,XX +XXX,XX @@ static uint64_t aspeed_vic_read(void *opaque, hwaddr offset, unsigned size) static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data, unsigned size) { - const bool high = !!(offset & 0x4); - hwaddr n_offset = (offset & ~0x4); AspeedVICState *s = (AspeedVICState *)opaque; + hwaddr n_offset; + bool high; if (offset < AVIC_NEW_BASE_OFFSET) { - qemu_log_mask(LOG_UNIMP, - "%s: Ignoring write to legacy registers at 0x%" - HWADDR_PRIx "[%u] <- 0x%" PRIx64 "\n", __func__, offset, - size, data); - return; + high = false; + n_offset = offset; + } else { + high = !!(offset & 0x4); + n_offset = (offset & ~0x4); } - n_offset -= AVIC_NEW_BASE_OFFSET; trace_aspeed_vic_write(offset, size, data); /* Given we have members using separate enable/clear registers, deposit64() @@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data, } switch (n_offset) { - case 0x18: /* Interrupt Selection */ + case 0x98: /* Interrupt Selection */ + case 0x0c: /* Register has deposit64() semantics - overwrite requested 32 bits */ if (high) { s->select &= AVIC_L_MASK; @@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data, } s->select |= data; break; - case 0x20: /* Interrupt Enable */ + case 0xa0: /* Interrupt Enable */ + case 0x10: s->enable |= data; break; - case 0x28: /* Interrupt Enable Clear */ + case 0xa8: /* Interrupt Enable Clear */ + case 0x14: s->enable &= ~data; break; - case 0x30: /* Software Interrupt */ + case 0xb0: /* Software Interrupt */ + case 0x18: qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. " "IRQs requested: 0x%016" PRIx64 "\n", __func__, data); break; - case 0x38: /* Software Interrupt Clear */ + case 0xb8: /* Software Interrupt Clear */ + case 0x1c: qemu_log_mask(LOG_UNIMP, "%s: Software interrupts unavailable. " "IRQs to be cleared: 0x%016" PRIx64 "\n", __func__, data); break; - case 0x50: /* Interrupt Event */ + case 0xd0: /* Interrupt Event */ /* Register has deposit64() semantics - overwrite the top four valid * IRQ bits, as only the top four IRQs (GPIOs) can change their event * type */ @@ -XXX,XX +XXX,XX @@ static void aspeed_vic_write(void *opaque, hwaddr offset, uint64_t data, "Ignoring invalid write to interrupt event register"); } break; - case 0x58: /* Edge Triggered Interrupt Clear */ + case 0xd8: /* Edge Triggered Interrupt Clear */ + case 0x38: s->raw &= ~(data & ~s->sense); break; - case 0x00: /* IRQ Status */ - case 0x08: /* FIQ Status */ - case 0x10: /* Raw Interrupt Status */ - case 0x40: /* Interrupt Sensitivity */ - case 0x48: /* Interrupt Both Edge Trigger Control */ - case 0x60: /* Edge Triggered Interrupt Status */ + case 0x80: /* IRQ Status */ + case 0x00: + case 0x88: /* FIQ Status */ + case 0x04: + case 0x90: /* Raw Interrupt Status */ + case 0x08: + case 0xc0: /* Interrupt Sensitivity */ + case 0x24: + case 0xc8: /* Interrupt Both Edge Trigger Control */ + case 0x28: + case 0xe0: /* Edge Triggered Interrupt Status */ qemu_log_mask(LOG_GUEST_ERROR, "%s: Write of read-only register with offset 0x%" HWADDR_PRIx "\n", __func__, offset); -- 2.20.1 From: Joel Stanley <joel@jms.id.au> The ast2500 uses the watchdog to reset the SDRAM controller. This operation is usually performed by u-boot's memory training procedure, and it is enabled by setting a bit in the SCU and then causing the watchdog to expire. Therefore, we need the watchdog to be able to access the SCU's register space. This causes the watchdog to not perform a system reset when the bit is set. In the future it could perform a reset of the SDMC model. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190621065242.32535-1-joel@jms.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/watchdog/wdt_aspeed.h | 1 + hw/arm/aspeed_soc.c | 2 ++ hw/watchdog/wdt_aspeed.c | 20 ++++++++++++++++++++ 3 files changed, 23 insertions(+) diff --git a/include/hw/watchdog/wdt_aspeed.h b/include/hw/watchdog/wdt_aspeed.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/watchdog/wdt_aspeed.h +++ b/include/hw/watchdog/wdt_aspeed.h @@ -XXX,XX +XXX,XX @@ typedef struct AspeedWDTState { MemoryRegion iomem; uint32_t regs[ASPEED_WDT_REGS_MAX]; + AspeedSCUState *scu; uint32_t pclk_freq; uint32_t silicon_rev; uint32_t ext_pulse_width_mask; diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/aspeed_soc.c +++ b/hw/arm/aspeed_soc.c @@ -XXX,XX +XXX,XX @@ static void aspeed_soc_init(Object *obj) sizeof(s->wdt[i]), TYPE_ASPEED_WDT); qdev_prop_set_uint32(DEVICE(&s->wdt[i]), "silicon-rev", sc->info->silicon_rev); + object_property_add_const_link(OBJECT(&s->wdt[i]), "scu", + OBJECT(&s->scu), &error_abort); } for (i = 0; i < ASPEED_MACS_NUM; i++) { diff --git a/hw/watchdog/wdt_aspeed.c b/hw/watchdog/wdt_aspeed.c index XXXXXXX..XXXXXXX 100644 --- a/hw/watchdog/wdt_aspeed.c +++ b/hw/watchdog/wdt_aspeed.c @@ -XXX,XX +XXX,XX @@ #define WDT_RESTART_MAGIC 0x4755 +#define SCU_RESET_CONTROL1 (0x04 / 4) +#define SCU_RESET_SDRAM BIT(0) + static bool aspeed_wdt_is_enabled(const AspeedWDTState *s) { return s->regs[WDT_CTRL] & WDT_CTRL_ENABLE; @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_timer_expired(void *dev) { AspeedWDTState *s = ASPEED_WDT(dev); + /* Do not reset on SDRAM controller reset */ + if (s->scu->regs[SCU_RESET_CONTROL1] & SCU_RESET_SDRAM) { + timer_del(s->timer); + s->regs[WDT_CTRL] = 0; + return; + } + qemu_log_mask(CPU_LOG_RESET, "Watchdog timer expired.\n"); watchdog_perform_action(); timer_del(s->timer); @@ -XXX,XX +XXX,XX @@ static void aspeed_wdt_realize(DeviceState *dev, Error **errp) { SysBusDevice *sbd = SYS_BUS_DEVICE(dev); AspeedWDTState *s = ASPEED_WDT(dev); + Error *err = NULL; + Object *obj; + + obj = object_property_get_link(OBJECT(dev), "scu", &err); + if (!obj) { + error_propagate(errp, err); + error_prepend(errp, "required link 'scu' not found: "); + return; + } + s->scu = ASPEED_SCU(obj); if (!is_supported_silicon_rev(s->silicon_rev)) { error_setg(errp, "Unknown silicon revision: 0x%" PRIx32, -- 2.20.1 From: Hongbo Zhang <hongbo.zhang@linaro.org> For AArch64, the existing "virt" machine is primarily meant to run on KVM and execute virtualization workloads, but we need an environment as faithful as possible to physical hardware, for supporting firmware and OS development for physical Aarch64 machines. This patch introduces new machine type 'sbsa-ref' with main features: - Based on 'virt' machine type. - A new memory map. - CPU type cortex-a57. - EL2 and EL3 are enabled. - GIC version 3. - System bus AHCI controller. - System bus EHCI controller. - CDROM and hard disc on AHCI bus. - E1000E ethernet card on PCIE bus. - VGA display adaptor on PCIE bus. - No virtio devices. - No fw_cfg device. - No ACPI table supplied. - Only minimal device tree nodes. Arm Trusted Firmware and UEFI porting to this are done accordingly, and the firmware should supply ACPI tables to the guest OS. The minimal device tree nodes supplied by QEMU for this platform are only to pass the dynamic info reflecting command line input to firmware, not for loading the guest OS. To make the review easier, this task is split into two patches, the fundamental skeleton part and the peripheral devices part; this patch is the first part. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Message-id: 1561890034-15921-2-git-send-email-hongbo.zhang@linaro.org [PMM: commit message tweaks; moved some bits between patch 1 and 2 to ensure patch 1 builds cleanly; removed unneeded lines from Kconfig stanza; only provide board for qemu-system-aarch64, not qemu-system-arm; added MAINTAINERS entry] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 1 + hw/arm/sbsa-ref.c | 271 ++++++++++++++++++++++++++++ MAINTAINERS | 8 + default-configs/aarch64-softmmu.mak | 1 + hw/arm/Kconfig | 14 ++ 5 files changed, 295 insertions(+) create mode 100644 hw/arm/sbsa-ref.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_SPITZ) += spitz.o obj-$(CONFIG_TOSA) += tosa.o obj-$(CONFIG_Z2) += z2.o obj-$(CONFIG_REALVIEW) += realview.o +obj-$(CONFIG_SBSA_REF) += sbsa-ref.o obj-$(CONFIG_STELLARIS) += stellaris.o obj-$(CONFIG_COLLIE) += collie.o obj-$(CONFIG_VERSATILE) += versatilepb.o diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM SBSA Reference Platform emulation + * + * Copyright (c) 2018 Linaro Limited + * Written by Hongbo Zhang <hongbo.zhang@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2 or later, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/error-report.h" +#include "qemu/units.h" +#include "sysemu/numa.h" +#include "sysemu/sysemu.h" +#include "exec/address-spaces.h" +#include "exec/hwaddr.h" +#include "kvm_arm.h" +#include "hw/arm/boot.h" +#include "hw/boards.h" +#include "hw/intc/arm_gicv3_common.h" + +#define RAMLIMIT_GB 8192 +#define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB) + +enum { + SBSA_FLASH, + SBSA_MEM, + SBSA_CPUPERIPHS, + SBSA_GIC_DIST, + SBSA_GIC_REDIST, + SBSA_SMMU, + SBSA_UART, + SBSA_RTC, + SBSA_PCIE, + SBSA_PCIE_MMIO, + SBSA_PCIE_MMIO_HIGH, + SBSA_PCIE_PIO, + SBSA_PCIE_ECAM, + SBSA_GPIO, + SBSA_SECURE_UART, + SBSA_SECURE_UART_MM, + SBSA_SECURE_MEM, + SBSA_AHCI, + SBSA_EHCI, +}; + +typedef struct MemMapEntry { + hwaddr base; + hwaddr size; +} MemMapEntry; + +typedef struct { + MachineState parent; + struct arm_boot_info bootinfo; + int smp_cpus; + void *fdt; + int fdt_size; + int psci_conduit; +} SBSAMachineState; + +#define TYPE_SBSA_MACHINE MACHINE_TYPE_NAME("sbsa-ref") +#define SBSA_MACHINE(obj) \ + OBJECT_CHECK(SBSAMachineState, (obj), TYPE_SBSA_MACHINE) + +static const MemMapEntry sbsa_ref_memmap[] = { + /* 512M boot ROM */ + [SBSA_FLASH] = { 0, 0x20000000 }, + /* 512M secure memory */ + [SBSA_SECURE_MEM] = { 0x20000000, 0x20000000 }, + /* Space reserved for CPU peripheral devices */ + [SBSA_CPUPERIPHS] = { 0x40000000, 0x00040000 }, + [SBSA_GIC_DIST] = { 0x40060000, 0x00010000 }, + [SBSA_GIC_REDIST] = { 0x40080000, 0x04000000 }, + [SBSA_UART] = { 0x60000000, 0x00001000 }, + [SBSA_RTC] = { 0x60010000, 0x00001000 }, + [SBSA_GPIO] = { 0x60020000, 0x00001000 }, + [SBSA_SECURE_UART] = { 0x60030000, 0x00001000 }, + [SBSA_SECURE_UART_MM] = { 0x60040000, 0x00001000 }, + [SBSA_SMMU] = { 0x60050000, 0x00020000 }, + /* Space here reserved for more SMMUs */ + [SBSA_AHCI] = { 0x60100000, 0x00010000 }, + [SBSA_EHCI] = { 0x60110000, 0x00010000 }, + /* Space here reserved for other devices */ + [SBSA_PCIE_PIO] = { 0x7fff0000, 0x00010000 }, + /* 32-bit address PCIE MMIO space */ + [SBSA_PCIE_MMIO] = { 0x80000000, 0x70000000 }, + /* 256M PCIE ECAM space */ + [SBSA_PCIE_ECAM] = { 0xf0000000, 0x10000000 }, + /* ~1TB PCIE MMIO space (4GB to 1024GB boundary) */ + [SBSA_PCIE_MMIO_HIGH] = { 0x100000000ULL, 0xFF00000000ULL }, + [SBSA_MEM] = { 0x10000000000ULL, RAMLIMIT_BYTES }, +}; + +static void sbsa_ref_init(MachineState *machine) +{ + SBSAMachineState *sms = SBSA_MACHINE(machine); + MachineClass *mc = MACHINE_GET_CLASS(machine); + MemoryRegion *sysmem = get_system_memory(); + MemoryRegion *secure_sysmem = NULL; + MemoryRegion *ram = g_new(MemoryRegion, 1); + const CPUArchIdList *possible_cpus; + int n, sbsa_max_cpus; + + if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) { + error_report("sbsa-ref: CPU type other than the built-in " + "cortex-a57 not supported"); + exit(1); + } + + if (kvm_enabled()) { + error_report("sbsa-ref: KVM is not supported for this machine"); + exit(1); + } + + /* + * This machine has EL3 enabled, external firmware should supply PSCI + * implementation, so the QEMU's internal PSCI is disabled. + */ + sms->psci_conduit = QEMU_PSCI_CONDUIT_DISABLED; + + sbsa_max_cpus = sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE; + + if (max_cpus > sbsa_max_cpus) { + error_report("Number of SMP CPUs requested (%d) exceeds max CPUs " + "supported by machine 'sbsa-ref' (%d)", + max_cpus, sbsa_max_cpus); + exit(1); + } + + sms->smp_cpus = smp_cpus; + + if (machine->ram_size > sbsa_ref_memmap[SBSA_MEM].size) { + error_report("sbsa-ref: cannot model more than %dGB RAM", RAMLIMIT_GB); + exit(1); + } + + possible_cpus = mc->possible_cpu_arch_ids(machine); + for (n = 0; n < possible_cpus->len; n++) { + Object *cpuobj; + CPUState *cs; + + if (n >= smp_cpus) { + break; + } + + cpuobj = object_new(possible_cpus->cpus[n].type); + object_property_set_int(cpuobj, possible_cpus->cpus[n].arch_id, + "mp-affinity", NULL); + + cs = CPU(cpuobj); + cs->cpu_index = n; + + numa_cpu_pre_plug(&possible_cpus->cpus[cs->cpu_index], DEVICE(cpuobj), + &error_fatal); + + if (object_property_find(cpuobj, "reset-cbar", NULL)) { + object_property_set_int(cpuobj, + sbsa_ref_memmap[SBSA_CPUPERIPHS].base, + "reset-cbar", &error_abort); + } + + object_property_set_link(cpuobj, OBJECT(sysmem), "memory", + &error_abort); + + object_property_set_link(cpuobj, OBJECT(secure_sysmem), + "secure-memory", &error_abort); + + object_property_set_bool(cpuobj, true, "realized", &error_fatal); + object_unref(cpuobj); + } + + memory_region_allocate_system_memory(ram, NULL, "sbsa-ref.ram", + machine->ram_size); + memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base, ram); + + sms->bootinfo.ram_size = machine->ram_size; + sms->bootinfo.kernel_filename = machine->kernel_filename; + sms->bootinfo.nb_cpus = smp_cpus; + sms->bootinfo.board_id = -1; + sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base; + arm_load_kernel(ARM_CPU(first_cpu), &sms->bootinfo); +} + +static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx) +{ + uint8_t clustersz = ARM_DEFAULT_CPUS_PER_CLUSTER; + return arm_cpu_mp_affinity(idx, clustersz); +} + +static const CPUArchIdList *sbsa_ref_possible_cpu_arch_ids(MachineState *ms) +{ + SBSAMachineState *sms = SBSA_MACHINE(ms); + int n; + + if (ms->possible_cpus) { + assert(ms->possible_cpus->len == max_cpus); + return ms->possible_cpus; + } + + ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) + + sizeof(CPUArchId) * max_cpus); + ms->possible_cpus->len = max_cpus; + for (n = 0; n < ms->possible_cpus->len; n++) { + ms->possible_cpus->cpus[n].type = ms->cpu_type; + ms->possible_cpus->cpus[n].arch_id = + sbsa_ref_cpu_mp_affinity(sms, n); + ms->possible_cpus->cpus[n].props.has_thread_id = true; + ms->possible_cpus->cpus[n].props.thread_id = n; + } + return ms->possible_cpus; +} + +static CpuInstanceProperties +sbsa_ref_cpu_index_to_props(MachineState *ms, unsigned cpu_index) +{ + MachineClass *mc = MACHINE_GET_CLASS(ms); + const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(ms); + + assert(cpu_index < possible_cpus->len); + return possible_cpus->cpus[cpu_index].props; +} + +static int64_t +sbsa_ref_get_default_cpu_node_id(const MachineState *ms, int idx) +{ + return idx % nb_numa_nodes; +} + +static void sbsa_ref_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + + mc->init = sbsa_ref_init; + mc->desc = "QEMU 'SBSA Reference' ARM Virtual Machine"; + mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a57"); + mc->max_cpus = 512; + mc->pci_allow_0_address = true; + mc->minimum_page_bits = 12; + mc->block_default_type = IF_IDE; + mc->no_cdrom = 1; + mc->default_ram_size = 1 * GiB; + mc->default_cpus = 4; + mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids; + mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props; + mc->get_default_cpu_node_id = sbsa_ref_get_default_cpu_node_id; +} + +static const TypeInfo sbsa_ref_info = { + .name = TYPE_SBSA_MACHINE, + .parent = TYPE_MACHINE, + .class_init = sbsa_ref_class_init, + .instance_size = sizeof(SBSAMachineState), +}; + +static void sbsa_ref_machine_init(void) +{ + type_register_static(&sbsa_ref_info); +} + +type_init(sbsa_ref_machine_init); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ F: include/hw/arm/fsl-imx6.h F: include/hw/misc/imx6_*.h F: include/hw/ssi/imx_spi.h +SBSA-REF +M: Radoslaw Biernacki <radoslaw.biernacki@linaro.org> +M: Peter Maydell <peter.maydell@linaro.org> +R: Leif Lindholm <leif.lindholm@linaro.org> +L: qemu-arm@nongnu.org +S: Maintained +F: hw/arm/sbsa-ref.c + Sharp SL-5500 (Collie) PDA M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org diff --git a/default-configs/aarch64-softmmu.mak b/default-configs/aarch64-softmmu.mak index XXXXXXX..XXXXXXX 100644 --- a/default-configs/aarch64-softmmu.mak +++ b/default-configs/aarch64-softmmu.mak @@ -XXX,XX +XXX,XX @@ include arm-softmmu.mak CONFIG_XLNX_ZYNQMP_ARM=y CONFIG_XLNX_VERSAL=y +CONFIG_SBSA_REF=y diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -XXX,XX +XXX,XX @@ config REALVIEW select DS1338 # I2C RTC+NVRAM select USB_OHCI +config SBSA_REF + bool + imply PCI_DEVICES + select AHCI + select ARM_SMMUV3 + select GPIO_KEY + select PCI_EXPRESS + select PCI_EXPRESS_GENERIC_BRIDGE + select PFLASH_CFI01 + select PL011 # UART + select PL031 # RTC + select PL061 # GPIO + select USB_EHCI_SYSBUS + config SABRELITE bool select FSL_IMX6 -- 2.20.1 From: Hongbo Zhang <hongbo.zhang@linaro.org> Following the previous patch, this patch adds peripheral devices to the newly introduced SBSA-ref machine. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Message-id: 1561890034-15921-3-git-send-email-hongbo.zhang@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/sbsa-ref.c | 535 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 535 insertions(+) diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu-common.h" #include "qapi/error.h" #include "qemu/error-report.h" #include "qemu/units.h" +#include "sysemu/device_tree.h" #include "sysemu/numa.h" #include "sysemu/sysemu.h" #include "exec/address-spaces.h" #include "exec/hwaddr.h" #include "kvm_arm.h" #include "hw/arm/boot.h" +#include "hw/block/flash.h" #include "hw/boards.h" +#include "hw/ide/internal.h" +#include "hw/ide/ahci_internal.h" #include "hw/intc/arm_gicv3_common.h" +#include "hw/loader.h" +#include "hw/pci-host/gpex.h" +#include "hw/usb.h" +#include "net/net.h" #define RAMLIMIT_GB 8192 #define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB) +#define NUM_IRQS 256 +#define NUM_SMMU_IRQS 4 +#define NUM_SATA_PORTS 6 + +#define VIRTUAL_PMU_IRQ 7 +#define ARCH_GIC_MAINT_IRQ 9 +#define ARCH_TIMER_VIRT_IRQ 11 +#define ARCH_TIMER_S_EL1_IRQ 13 +#define ARCH_TIMER_NS_EL1_IRQ 14 +#define ARCH_TIMER_NS_EL2_IRQ 10 + enum { SBSA_FLASH, SBSA_MEM, @@ -XXX,XX +XXX,XX @@ typedef struct { void *fdt; int fdt_size; int psci_conduit; + PFlashCFI01 *flash[2]; } SBSAMachineState; #define TYPE_SBSA_MACHINE MACHINE_TYPE_NAME("sbsa-ref") @@ -XXX,XX +XXX,XX @@ static const MemMapEntry sbsa_ref_memmap[] = { [SBSA_MEM] = { 0x10000000000ULL, RAMLIMIT_BYTES }, }; +static const int sbsa_ref_irqmap[] = { + [SBSA_UART] = 1, + [SBSA_RTC] = 2, + [SBSA_PCIE] = 3, /* ... to 6 */ + [SBSA_GPIO] = 7, + [SBSA_SECURE_UART] = 8, + [SBSA_SECURE_UART_MM] = 9, + [SBSA_AHCI] = 10, + [SBSA_EHCI] = 11, +}; + +/* + * Firmware on this machine only uses ACPI table to load OS, these limited + * device tree nodes are just to let firmware know the info which varies from + * command line parameters, so it is not necessary to be fully compatible + * with the kernel CPU and NUMA binding rules. + */ +static void create_fdt(SBSAMachineState *sms) +{ + void *fdt = create_device_tree(&sms->fdt_size); + const MachineState *ms = MACHINE(sms); + int cpu; + + if (!fdt) { + error_report("create_device_tree() failed"); + exit(1); + } + + sms->fdt = fdt; + + qemu_fdt_setprop_string(fdt, "/", "compatible", "linux,sbsa-ref"); + qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); + qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); + + if (have_numa_distance) { + int size = nb_numa_nodes * nb_numa_nodes * 3 * sizeof(uint32_t); + uint32_t *matrix = g_malloc0(size); + int idx, i, j; + + for (i = 0; i < nb_numa_nodes; i++) { + for (j = 0; j < nb_numa_nodes; j++) { + idx = (i * nb_numa_nodes + j) * 3; + matrix[idx + 0] = cpu_to_be32(i); + matrix[idx + 1] = cpu_to_be32(j); + matrix[idx + 2] = cpu_to_be32(numa_info[i].distance[j]); + } + } + + qemu_fdt_add_subnode(fdt, "/distance-map"); + qemu_fdt_setprop(fdt, "/distance-map", "distance-matrix", + matrix, size); + g_free(matrix); + } + + qemu_fdt_add_subnode(sms->fdt, "/cpus"); + + for (cpu = sms->smp_cpus - 1; cpu >= 0; cpu--) { + char *nodename = g_strdup_printf("/cpus/cpu@%d", cpu); + ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(cpu)); + CPUState *cs = CPU(armcpu); + + qemu_fdt_add_subnode(sms->fdt, nodename); + + if (ms->possible_cpus->cpus[cs->cpu_index].props.has_node_id) { + qemu_fdt_setprop_cell(sms->fdt, nodename, "numa-node-id", + ms->possible_cpus->cpus[cs->cpu_index].props.node_id); + } + + g_free(nodename); + } +} + +#define SBSA_FLASH_SECTOR_SIZE (256 * KiB) + +static PFlashCFI01 *sbsa_flash_create1(SBSAMachineState *sms, + const char *name, + const char *alias_prop_name) +{ + /* + * Create a single flash device. We use the same parameters as + * the flash devices on the Versatile Express board. + */ + DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01); + + qdev_prop_set_uint64(dev, "sector-length", SBSA_FLASH_SECTOR_SIZE); + qdev_prop_set_uint8(dev, "width", 4); + qdev_prop_set_uint8(dev, "device-width", 2); + qdev_prop_set_bit(dev, "big-endian", false); + qdev_prop_set_uint16(dev, "id0", 0x89); + qdev_prop_set_uint16(dev, "id1", 0x18); + qdev_prop_set_uint16(dev, "id2", 0x00); + qdev_prop_set_uint16(dev, "id3", 0x00); + qdev_prop_set_string(dev, "name", name); + object_property_add_child(OBJECT(sms), name, OBJECT(dev), + &error_abort); + object_property_add_alias(OBJECT(sms), alias_prop_name, + OBJECT(dev), "drive", &error_abort); + return PFLASH_CFI01(dev); +} + +static void sbsa_flash_create(SBSAMachineState *sms) +{ + sms->flash[0] = sbsa_flash_create1(sms, "sbsa.flash0", "pflash0"); + sms->flash[1] = sbsa_flash_create1(sms, "sbsa.flash1", "pflash1"); +} + +static void sbsa_flash_map1(PFlashCFI01 *flash, + hwaddr base, hwaddr size, + MemoryRegion *sysmem) +{ + DeviceState *dev = DEVICE(flash); + + assert(size % SBSA_FLASH_SECTOR_SIZE == 0); + assert(size / SBSA_FLASH_SECTOR_SIZE <= UINT32_MAX); + qdev_prop_set_uint32(dev, "num-blocks", size / SBSA_FLASH_SECTOR_SIZE); + qdev_init_nofail(dev); + + memory_region_add_subregion(sysmem, base, + sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), + 0)); +} + +static void sbsa_flash_map(SBSAMachineState *sms, + MemoryRegion *sysmem, + MemoryRegion *secure_sysmem) +{ + /* + * Map two flash devices to fill the SBSA_FLASH space in the memmap. + * sysmem is the system memory space. secure_sysmem is the secure view + * of the system, and the first flash device should be made visible only + * there. The second flash device is visible to both secure and nonsecure. + * If sysmem == secure_sysmem this means there is no separate Secure + * address space and both flash devices are generally visible. + */ + hwaddr flashsize = sbsa_ref_memmap[SBSA_FLASH].size / 2; + hwaddr flashbase = sbsa_ref_memmap[SBSA_FLASH].base; + + sbsa_flash_map1(sms->flash[0], flashbase, flashsize, + secure_sysmem); + sbsa_flash_map1(sms->flash[1], flashbase + flashsize, flashsize, + sysmem); +} + +static bool sbsa_firmware_init(SBSAMachineState *sms, + MemoryRegion *sysmem, + MemoryRegion *secure_sysmem) +{ + int i; + BlockBackend *pflash_blk0; + + /* Map legacy -drive if=pflash to machine properties */ + for (i = 0; i < ARRAY_SIZE(sms->flash); i++) { + pflash_cfi01_legacy_drive(sms->flash[i], + drive_get(IF_PFLASH, 0, i)); + } + + sbsa_flash_map(sms, sysmem, secure_sysmem); + + pflash_blk0 = pflash_cfi01_get_blk(sms->flash[0]); + + if (bios_name) { + char *fname; + MemoryRegion *mr; + int image_size; + + if (pflash_blk0) { + error_report("The contents of the first flash device may be " + "specified with -bios or with -drive if=pflash... " + "but you cannot use both options at once"); + exit(1); + } + + /* Fall back to -bios */ + + fname = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); + if (!fname) { + error_report("Could not find ROM image '%s'", bios_name); + exit(1); + } + mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(sms->flash[0]), 0); + image_size = load_image_mr(fname, mr); + g_free(fname); + if (image_size < 0) { + error_report("Could not load ROM image '%s'", bios_name); + exit(1); + } + } + + return pflash_blk0 || bios_name; +} + +static void create_secure_ram(SBSAMachineState *sms, + MemoryRegion *secure_sysmem) +{ + MemoryRegion *secram = g_new(MemoryRegion, 1); + hwaddr base = sbsa_ref_memmap[SBSA_SECURE_MEM].base; + hwaddr size = sbsa_ref_memmap[SBSA_SECURE_MEM].size; + + memory_region_init_ram(secram, NULL, "sbsa-ref.secure-ram", size, + &error_fatal); + memory_region_add_subregion(secure_sysmem, base, secram); +} + +static void create_gic(SBSAMachineState *sms, qemu_irq *pic) +{ + DeviceState *gicdev; + SysBusDevice *gicbusdev; + const char *gictype; + uint32_t redist0_capacity, redist0_count; + int i; + + gictype = gicv3_class_name(); + + gicdev = qdev_create(NULL, gictype); + qdev_prop_set_uint32(gicdev, "revision", 3); + qdev_prop_set_uint32(gicdev, "num-cpu", smp_cpus); + /* + * Note that the num-irq property counts both internal and external + * interrupts; there are always 32 of the former (mandated by GIC spec). + */ + qdev_prop_set_uint32(gicdev, "num-irq", NUM_IRQS + 32); + qdev_prop_set_bit(gicdev, "has-security-extensions", true); + + redist0_capacity = + sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE; + redist0_count = MIN(smp_cpus, redist0_capacity); + + qdev_prop_set_uint32(gicdev, "len-redist-region-count", 1); + qdev_prop_set_uint32(gicdev, "redist-region-count[0]", redist0_count); + + qdev_init_nofail(gicdev); + gicbusdev = SYS_BUS_DEVICE(gicdev); + sysbus_mmio_map(gicbusdev, 0, sbsa_ref_memmap[SBSA_GIC_DIST].base); + sysbus_mmio_map(gicbusdev, 1, sbsa_ref_memmap[SBSA_GIC_REDIST].base); + + /* + * Wire the outputs from each CPU's generic timer and the GICv3 + * maintenance interrupt signal to the appropriate GIC PPI inputs, + * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs. + */ + for (i = 0; i < smp_cpus; i++) { + DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); + int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int irq; + /* + * Mapping from the output timer irq lines from the CPU to the + * GIC PPI inputs used for this board. + */ + const int timer_irq[] = { + [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ, + [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ, + [GTIMER_HYP] = ARCH_TIMER_NS_EL2_IRQ, + [GTIMER_SEC] = ARCH_TIMER_S_EL1_IRQ, + }; + + for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { + qdev_connect_gpio_out(cpudev, irq, + qdev_get_gpio_in(gicdev, + ppibase + timer_irq[irq])); + } + + qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, + qdev_get_gpio_in(gicdev, ppibase + + ARCH_GIC_MAINT_IRQ)); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, + qdev_get_gpio_in(gicdev, ppibase + + VIRTUAL_PMU_IRQ)); + + sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); + sysbus_connect_irq(gicbusdev, i + smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_FIQ)); + sysbus_connect_irq(gicbusdev, i + 2 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ)); + sysbus_connect_irq(gicbusdev, i + 3 * smp_cpus, + qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ)); + } + + for (i = 0; i < NUM_IRQS; i++) { + pic[i] = qdev_get_gpio_in(gicdev, i); + } +} + +static void create_uart(const SBSAMachineState *sms, qemu_irq *pic, int uart, + MemoryRegion *mem, Chardev *chr) +{ + hwaddr base = sbsa_ref_memmap[uart].base; + int irq = sbsa_ref_irqmap[uart]; + DeviceState *dev = qdev_create(NULL, "pl011"); + SysBusDevice *s = SYS_BUS_DEVICE(dev); + + qdev_prop_set_chr(dev, "chardev", chr); + qdev_init_nofail(dev); + memory_region_add_subregion(mem, base, + sysbus_mmio_get_region(s, 0)); + sysbus_connect_irq(s, 0, pic[irq]); +} + +static void create_rtc(const SBSAMachineState *sms, qemu_irq *pic) +{ + hwaddr base = sbsa_ref_memmap[SBSA_RTC].base; + int irq = sbsa_ref_irqmap[SBSA_RTC]; + + sysbus_create_simple("pl031", base, pic[irq]); +} + +static DeviceState *gpio_key_dev; +static void sbsa_ref_powerdown_req(Notifier *n, void *opaque) +{ + /* use gpio Pin 3 for power button event */ + qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1); +} + +static Notifier sbsa_ref_powerdown_notifier = { + .notify = sbsa_ref_powerdown_req +}; + +static void create_gpio(const SBSAMachineState *sms, qemu_irq *pic) +{ + DeviceState *pl061_dev; + hwaddr base = sbsa_ref_memmap[SBSA_GPIO].base; + int irq = sbsa_ref_irqmap[SBSA_GPIO]; + + pl061_dev = sysbus_create_simple("pl061", base, pic[irq]); + + gpio_key_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 3)); + + /* connect powerdown request */ + qemu_register_powerdown_notifier(&sbsa_ref_powerdown_notifier); +} + +static void create_ahci(const SBSAMachineState *sms, qemu_irq *pic) +{ + hwaddr base = sbsa_ref_memmap[SBSA_AHCI].base; + int irq = sbsa_ref_irqmap[SBSA_AHCI]; + DeviceState *dev; + DriveInfo *hd[NUM_SATA_PORTS]; + SysbusAHCIState *sysahci; + AHCIState *ahci; + int i; + + dev = qdev_create(NULL, "sysbus-ahci"); + qdev_prop_set_uint32(dev, "num-ports", NUM_SATA_PORTS); + qdev_init_nofail(dev); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[irq]); + + sysahci = SYSBUS_AHCI(dev); + ahci = &sysahci->ahci; + ide_drive_get(hd, ARRAY_SIZE(hd)); + for (i = 0; i < ahci->ports; i++) { + if (hd[i] == NULL) { + continue; + } + ide_create_drive(&ahci->dev[i].port, 0, hd[i]); + } +} + +static void create_ehci(const SBSAMachineState *sms, qemu_irq *pic) +{ + hwaddr base = sbsa_ref_memmap[SBSA_EHCI].base; + int irq = sbsa_ref_irqmap[SBSA_EHCI]; + + sysbus_create_simple("platform-ehci-usb", base, pic[irq]); +} + +static void create_smmu(const SBSAMachineState *sms, qemu_irq *pic, + PCIBus *bus) +{ + hwaddr base = sbsa_ref_memmap[SBSA_SMMU].base; + int irq = sbsa_ref_irqmap[SBSA_SMMU]; + DeviceState *dev; + int i; + + dev = qdev_create(NULL, "arm-smmuv3"); + + object_property_set_link(OBJECT(dev), OBJECT(bus), "primary-bus", + &error_abort); + qdev_init_nofail(dev); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); + for (i = 0; i < NUM_SMMU_IRQS; i++) { + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + } +} + +static void create_pcie(SBSAMachineState *sms, qemu_irq *pic) +{ + hwaddr base_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].base; + hwaddr size_ecam = sbsa_ref_memmap[SBSA_PCIE_ECAM].size; + hwaddr base_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].base; + hwaddr size_mmio = sbsa_ref_memmap[SBSA_PCIE_MMIO].size; + hwaddr base_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].base; + hwaddr size_mmio_high = sbsa_ref_memmap[SBSA_PCIE_MMIO_HIGH].size; + hwaddr base_pio = sbsa_ref_memmap[SBSA_PCIE_PIO].base; + int irq = sbsa_ref_irqmap[SBSA_PCIE]; + MemoryRegion *mmio_alias, *mmio_alias_high, *mmio_reg; + MemoryRegion *ecam_alias, *ecam_reg; + DeviceState *dev; + PCIHostState *pci; + int i; + + dev = qdev_create(NULL, TYPE_GPEX_HOST); + qdev_init_nofail(dev); + + /* Map ECAM space */ + ecam_alias = g_new0(MemoryRegion, 1); + ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); + memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam", + ecam_reg, 0, size_ecam); + memory_region_add_subregion(get_system_memory(), base_ecam, ecam_alias); + + /* Map the MMIO space */ + mmio_alias = g_new0(MemoryRegion, 1); + mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); + memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio", + mmio_reg, base_mmio, size_mmio); + memory_region_add_subregion(get_system_memory(), base_mmio, mmio_alias); + + /* Map the MMIO_HIGH space */ + mmio_alias_high = g_new0(MemoryRegion, 1); + memory_region_init_alias(mmio_alias_high, OBJECT(dev), "pcie-mmio-high", + mmio_reg, base_mmio_high, size_mmio_high); + memory_region_add_subregion(get_system_memory(), base_mmio_high, + mmio_alias_high); + + /* Map IO port space */ + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, base_pio); + + for (i = 0; i < GPEX_NUM_IRQS; i++) { + sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + gpex_set_irq_num(GPEX_HOST(dev), i, irq + i); + } + + pci = PCI_HOST_BRIDGE(dev); + if (pci->bus) { + for (i = 0; i < nb_nics; i++) { + NICInfo *nd = &nd_table[i]; + + if (!nd->model) { + nd->model = g_strdup("e1000e"); + } + + pci_nic_init_nofail(nd, pci->bus, nd->model, NULL); + } + } + + pci_create_simple(pci->bus, -1, "VGA"); + + create_smmu(sms, pic, pci->bus); +} + +static void *sbsa_ref_dtb(const struct arm_boot_info *binfo, int *fdt_size) +{ + const SBSAMachineState *board = container_of(binfo, SBSAMachineState, + bootinfo); + + *fdt_size = board->fdt_size; + return board->fdt; +} + static void sbsa_ref_init(MachineState *machine) { SBSAMachineState *sms = SBSA_MACHINE(machine); @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) MemoryRegion *sysmem = get_system_memory(); MemoryRegion *secure_sysmem = NULL; MemoryRegion *ram = g_new(MemoryRegion, 1); + bool firmware_loaded; const CPUArchIdList *possible_cpus; int n, sbsa_max_cpus; + qemu_irq pic[NUM_IRQS]; if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) { error_report("sbsa-ref: CPU type other than the built-in " @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) exit(1); } + /* + * The Secure view of the world is the same as the NonSecure, + * but with a few extra devices. Create it as a container region + * containing the system memory at low priority; any secure-only + * devices go in at higher priority and take precedence. + */ + secure_sysmem = g_new(MemoryRegion, 1); + memory_region_init(secure_sysmem, OBJECT(machine), "secure-memory", + UINT64_MAX); + memory_region_add_subregion_overlap(secure_sysmem, 0, sysmem, -1); + + firmware_loaded = sbsa_firmware_init(sms, sysmem, + secure_sysmem ?: sysmem); + + if (machine->kernel_filename && firmware_loaded) { + error_report("sbsa-ref: No fw_cfg device on this machine, " + "so -kernel option is not supported when firmware loaded, " + "please load OS from hard disk instead"); + exit(1); + } + /* * This machine has EL3 enabled, external firmware should supply PSCI * implementation, so the QEMU's internal PSCI is disabled. @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_init(MachineState *machine) machine->ram_size); memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base, ram); + create_fdt(sms); + + create_secure_ram(sms, secure_sysmem); + + create_gic(sms, pic); + + create_uart(sms, pic, SBSA_UART, sysmem, serial_hd(0)); + create_uart(sms, pic, SBSA_SECURE_UART, secure_sysmem, serial_hd(1)); + /* Second secure UART for RAS and MM from EL0 */ + create_uart(sms, pic, SBSA_SECURE_UART_MM, secure_sysmem, serial_hd(2)); + + create_rtc(sms, pic); + + create_gpio(sms, pic); + + create_ahci(sms, pic); + + create_ehci(sms, pic); + + create_pcie(sms, pic); + sms->bootinfo.ram_size = machine->ram_size; sms->bootinfo.kernel_filename = machine->kernel_filename; sms->bootinfo.nb_cpus = smp_cpus; sms->bootinfo.board_id = -1; sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base; + sms->bootinfo.get_dtb = sbsa_ref_dtb; + sms->bootinfo.firmware_loaded = firmware_loaded; arm_load_kernel(ARM_CPU(first_cpu), &sms->bootinfo); } @@ -XXX,XX +XXX,XX @@ sbsa_ref_get_default_cpu_node_id(const MachineState *ms, int idx) return idx % nb_numa_nodes; } +static void sbsa_ref_instance_init(Object *obj) +{ + SBSAMachineState *sms = SBSA_MACHINE(obj); + + sbsa_flash_create(sms); +} + static void sbsa_ref_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); @@ -XXX,XX +XXX,XX @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data) static const TypeInfo sbsa_ref_info = { .name = TYPE_SBSA_MACHINE, .parent = TYPE_MACHINE, + .instance_init = sbsa_ref_instance_init, .class_init = sbsa_ref_class_init, .instance_size = sizeof(SBSAMachineState), }; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Group Aarch64 rules together, TCG related ones at the bottom. This will help when restricting TCG-only objects. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-2-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += translate.o op_helper.o helper.o cpu.o obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o vfp_helper.o obj-y += gdbstub.o -obj-$(TARGET_AARCH64) += cpu64.o translate-a64.o helper-a64.o gdbstub64.o -obj-$(TARGET_AARCH64) += pauth_helper.o +obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o obj-y += crypto_helper.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o @@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c target/arm/translate.o: target/arm/decode-vfp.inc.c target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c +obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o +obj-$(TARGET_AARCH64) += pauth_helper.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Group ARM objects together, TCG related ones at the bottom. This will help when restricting TCG-only objects. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-3-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-$(CONFIG_KVM) += kvm.o obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o -obj-y += translate.o op_helper.o helper.o cpu.o -obj-y += neon_helper.o iwmmxt_helper.o vec_helper.o vfp_helper.o -obj-y += gdbstub.o +obj-y += helper.o vfp_helper.o +obj-y += cpu.o gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o -obj-y += crypto_helper.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o DECODETREE = $(SRC_PATH)/scripts/decodetree.py @@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c target/arm/translate.o: target/arm/decode-vfp.inc.c target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c +obj-y += translate.o op_helper.o +obj-y += crypto_helper.o +obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o + obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o obj-$(TARGET_AARCH64) += pauth_helper.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Group KVM rules together. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-4-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-y += arm-semi.o obj-$(CONFIG_SOFTMMU) += machine.o psci.o arch_dump.o monitor.o -obj-$(CONFIG_KVM) += kvm.o -obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o -obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o -obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o obj-y += helper.o vfp_helper.o obj-y += cpu.o gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o +obj-$(CONFIG_KVM) += kvm.o +obj-$(call land,$(CONFIG_KVM),$(call lnot,$(TARGET_AARCH64))) += kvm32.o +obj-$(call land,$(CONFIG_KVM),$(TARGET_AARCH64)) += kvm64.o +obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o + DECODETREE = $(SRC_PATH)/scripts/decodetree.py target/arm/decode-sve.inc.c: $(SRC_PATH)/target/arm/sve.decode $(DECODETREE) -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Group SOFTMMU objects together. Since PSCI is TCG specific, keep it separate. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-y += arm-semi.o -obj-$(CONFIG_SOFTMMU) += machine.o psci.o arch_dump.o monitor.o obj-y += helper.o vfp_helper.o obj-y += cpu.o gdbstub.o obj-$(TARGET_AARCH64) += cpu64.o gdbstub64.o + +obj-$(CONFIG_SOFTMMU) += machine.o arch_dump.o monitor.o obj-$(CONFIG_SOFTMMU) += arm-powerctl.o obj-$(CONFIG_KVM) += kvm.o @@ -XXX,XX +XXX,XX @@ obj-y += translate.o op_helper.o obj-y += crypto_helper.o obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o +obj-$(CONFIG_SOFTMMU) += psci.o + obj-$(TARGET_AARCH64) += translate-a64.o helper-a64.o obj-$(TARGET_AARCH64) += translate-sve.o sve_helper.o obj-$(TARGET_AARCH64) += pauth_helper.o -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Robert Bradford <robert.bradford@intel.com> Reviewed-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM generic helpers. + * + * This code is licensed under the GNU GPL v2 or later. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ #include "qemu/osdep.h" #include "qemu/units.h" #include "target/arm/idau.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-7-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #include "exec/gdbstub.h" #include "exec/helper-proto.h" #include "qemu/host-utils.h" -#include "sysemu/arch_init.h" #include "sysemu/sysemu.h" #include "qemu/bitops.h" #include "qemu/crc32c.h" @@ -XXX,XX +XXX,XX @@ #include "hw/semihosting/semihost.h" #include "sysemu/cpus.h" #include "sysemu/kvm.h" -#include "fpu/softfloat.h" #include "qemu/range.h" #include "qapi/qapi-commands-target.h" #include "qapi/error.h" -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since commit 8c06fbdf36b checkpatch.pl enforce a new multiline comment syntax. Since we'll move this code around, fix its style first. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 237 ++++++++++++++++++++++++++-------------- target/arm/op_helper.c | 54 ++++++--- target/arm/vfp_helper.c | 3 +- 3 files changed, 196 insertions(+), 98 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) { - /* The TT instructions can be used by unprivileged code, but in + /* + * The TT instructions can be used by unprivileged code, but in * user-only emulation we don't have the MPU. * Luckily since we know we are NonSecure unprivileged (and that in * turn means that the A flag wasn't specified), all the bits in the @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_write(ARMCPU *cpu, uint32_t addr, uint32_t value, return true; pend_fault: - /* By pending the exception at this point we are making + /* + * By pending the exception at this point we are making * the IMPDEF choice "overridden exceptions pended" (see the * MergeExcInfo() pseudocode). The other choice would be to not * pend them now and then make a choice about which to throw away @@ -XXX,XX +XXX,XX @@ static bool v7m_stack_read(ARMCPU *cpu, uint32_t *dest, uint32_t addr, return true; pend_fault: - /* By pending the exception at this point we are making + /* + * By pending the exception at this point we are making * the IMPDEF choice "overridden exceptions pended" (see the * MergeExcInfo() pseudocode). The other choice would be to not * pend them now and then make a choice about which to throw away @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_preserve_fp_state)(CPUARMState *env) */ } -/* Write to v7M CONTROL.SPSEL bit for the specified security bank. +/* + * Write to v7M CONTROL.SPSEL bit for the specified security bank. * This may change the current stack pointer between Main and Process * stack pointers if it is done for the CONTROL register for the current * security state. @@ -XXX,XX +XXX,XX @@ static void write_v7m_control_spsel_for_secstate(CPUARMState *env, } } -/* Write to v7M CONTROL.SPSEL bit. This may change the current +/* + * Write to v7M CONTROL.SPSEL bit. This may change the current * stack pointer between Main and Process stack pointers. */ static void write_v7m_control_spsel(CPUARMState *env, bool new_spsel) @@ -XXX,XX +XXX,XX @@ static void write_v7m_control_spsel(CPUARMState *env, bool new_spsel) void write_v7m_exception(CPUARMState *env, uint32_t new_exc) { - /* Write a new value to v7m.exception, thus transitioning into or out + /* + * Write a new value to v7m.exception, thus transitioning into or out * of Handler mode; this may result in a change of active stack pointer. */ bool new_is_psp, old_is_psp = v7m_using_psp(env); @@ -XXX,XX +XXX,XX @@ static void switch_v7m_security_state(CPUARMState *env, bool new_secstate) return; } - /* All the banked state is accessed by looking at env->v7m.secure + /* + * All the banked state is accessed by looking at env->v7m.secure * except for the stack pointer; rearrange the SP appropriately. */ new_ss_msp = env->v7m.other_ss_msp; @@ -XXX,XX +XXX,XX @@ static void switch_v7m_security_state(CPUARMState *env, bool new_secstate) void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) { - /* Handle v7M BXNS: + /* + * Handle v7M BXNS: * - if the return value is a magic value, do exception return (like BX) * - otherwise bit 0 of the return value is the target security state */ @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) } if (dest >= min_magic) { - /* This is an exception return magic value; put it where + /* + * This is an exception return magic value; put it where * do_v7m_exception_exit() expects and raise EXCEPTION_EXIT. * Note that if we ever add gen_ss_advance() singlestep support to * M profile this should count as an "instruction execution complete" @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_bxns)(CPUARMState *env, uint32_t dest) void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) { - /* Handle v7M BLXNS: + /* + * Handle v7M BLXNS: * - bit 0 of the destination address is the target security state */ @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) assert(env->v7m.secure); if (dest & 1) { - /* target is Secure, so this is just a normal BLX, + /* + * Target is Secure, so this is just a normal BLX, * except that the low bit doesn't indicate Thumb/not. */ env->regs[14] = nextinst; @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) env->regs[13] = sp; env->regs[14] = 0xfeffffff; if (arm_v7m_is_handler_mode(env)) { - /* Write a dummy value to IPSR, to avoid leaking the current secure + /* + * Write a dummy value to IPSR, to avoid leaking the current secure * exception number to non-secure code. This is guaranteed not * to cause write_v7m_exception() to actually change stacks. */ @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_blxns)(CPUARMState *env, uint32_t dest) static uint32_t *get_v7m_sp_ptr(CPUARMState *env, bool secure, bool threadmode, bool spsel) { - /* Return a pointer to the location where we currently store the + /* + * Return a pointer to the location where we currently store the * stack pointer for the requested security state and thread mode. * This pointer will become invalid if the CPU state is updated * such that the stack pointers are switched around (eg changing @@ -XXX,XX +XXX,XX @@ static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure, mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targets_secure, true); - /* We don't do a get_phys_addr() here because the rules for vector + /* + * We don't do a get_phys_addr() here because the rules for vector * loads are special: they always use the default memory map, and * the default memory map permits reads from all addresses. * Since there's no easy way to pass through to pmsav8_mpu_lookup() @@ -XXX,XX +XXX,XX @@ static bool arm_v7m_load_vector(ARMCPU *cpu, int exc, bool targets_secure, return true; load_fail: - /* All vector table fetch fails are reported as HardFault, with + /* + * All vector table fetch fails are reported as HardFault, with * HFSR.VECTTBL and .FORCED set. (FORCED is set because * technically the underlying exception is a MemManage or BusFault * that is escalated to HardFault.) This is a terminal exception, @@ -XXX,XX +XXX,XX @@ static uint32_t v7m_integrity_sig(CPUARMState *env, uint32_t lr) static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_faults) { - /* For v8M, push the callee-saves register part of the stack frame. + /* + * For v8M, push the callee-saves register part of the stack frame. * Compare the v8M pseudocode PushCalleeStack(). * In the tailchaining case this may not be the current stack. */ @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, return true; } - /* Write as much of the stack frame as we can. A write failure may + /* + * Write as much of the stack frame as we can. A write failure may * cause us to pend a derived exception. */ sig = v7m_integrity_sig(env, lr); @@ -XXX,XX +XXX,XX @@ static bool v7m_push_callee_stack(ARMCPU *cpu, uint32_t lr, bool dotailchain, static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, bool ignore_stackfaults) { - /* Do the "take the exception" parts of exception entry, + /* + * Do the "take the exception" parts of exception entry, * but not the pushing of state to the stack. This is * similar to the pseudocode ExceptionTaken() function. */ @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, if (arm_feature(env, ARM_FEATURE_V8)) { if (arm_feature(env, ARM_FEATURE_M_SECURITY) && (lr & R_V7M_EXCRET_S_MASK)) { - /* The background code (the owner of the registers in the + /* + * The background code (the owner of the registers in the * exception frame) is Secure. This means it may either already * have or now needs to push callee-saves registers. */ if (targets_secure) { if (dotailchain && !(lr & R_V7M_EXCRET_ES_MASK)) { - /* We took an exception from Secure to NonSecure + /* + * We took an exception from Secure to NonSecure * (which means the callee-saved registers got stacked) * and are now tailchaining to a Secure exception. * Clear DCRS so eventual return from this Secure @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, lr &= ~R_V7M_EXCRET_DCRS_MASK; } } else { - /* We're going to a non-secure exception; push the + /* + * We're going to a non-secure exception; push the * callee-saves registers to the stack now, if they're * not already saved. */ @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, lr |= R_V7M_EXCRET_SPSEL_MASK; } - /* Clear registers if necessary to prevent non-secure exception + /* + * Clear registers if necessary to prevent non-secure exception * code being able to see register values from secure code. * Where register values become architecturally UNKNOWN we leave * them with their previous values. */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { if (!targets_secure) { - /* Always clear the caller-saved registers (they have been + /* + * Always clear the caller-saved registers (they have been * pushed to the stack earlier in v7m_push_stack()). * Clear callee-saved registers if the background code is * Secure (in which case these regs were saved in @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, } if (push_failed && !ignore_stackfaults) { - /* Derived exception on callee-saves register stacking: + /* + * Derived exception on callee-saves register stacking: * we might now want to take a different exception which * targets a different security state, so try again from the top. */ @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr, bool dotailchain, return; } - /* Now we've done everything that might cause a derived exception + /* + * Now we've done everything that might cause a derived exception * we can go ahead and activate whichever exception we're going to * take (which might now be the derived exception). */ @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_vlldm)(CPUARMState *env, uint32_t fptr) static bool v7m_push_stack(ARMCPU *cpu) { - /* Do the "set up stack frame" part of exception entry, + /* + * Do the "set up stack frame" part of exception entry, * similar to pseudocode PushStack(). * Return true if we generate a derived exception (and so * should ignore further stack faults trying to process @@ -XXX,XX +XXX,XX @@ static bool v7m_push_stack(ARMCPU *cpu) } } - /* Write as much of the stack frame as we can. If we fail a stack + /* + * Write as much of the stack frame as we can. If we fail a stack * write this will result in a derived exception being pended * (which may be taken in preference to the one we started with * if it has higher priority). @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) bool ftype; bool restore_s16_s31; - /* If we're not in Handler mode then jumps to magic exception-exit + /* + * If we're not in Handler mode then jumps to magic exception-exit * addresses don't have magic behaviour. However for the v8M * security extensions the magic secure-function-return has to * work in thread mode too, so to avoid doing an extra check in @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } - /* In the spec pseudocode ExceptionReturn() is called directly + /* + * In the spec pseudocode ExceptionReturn() is called directly * from BXWritePC() and gets the full target PC value including * bit zero. In QEMU's implementation we treat it as a normal * jump-to-register (which is then caught later on), and so split @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - /* EXC_RETURN.ES validation check (R_SMFL). We must do this before + /* + * EXC_RETURN.ES validation check (R_SMFL). We must do this before * we pick which FAULTMASK to clear. */ if (!env->v7m.secure && @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } if (env->v7m.exception != ARMV7M_EXCP_NMI) { - /* Auto-clear FAULTMASK on return from other than NMI. + /* + * Auto-clear FAULTMASK on return from other than NMI. * If the security extension is implemented then this only * happens if the raw execution priority is >= 0; the * value of the ES bit in the exception return value indicates @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* still an irq active now */ break; case 1: - /* we returned to base exception level, no nesting. + /* + * We returned to base exception level, no nesting. * (In the pseudocode this is written using "NestedActivation != 1" * where we have 'rettobase == false'.) */ @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) if (arm_feature(env, ARM_FEATURE_V8)) { if (!arm_feature(env, ARM_FEATURE_M_SECURITY)) { - /* UNPREDICTABLE if S == 1 or DCRS == 0 or ES == 1 (R_XLCP); + /* + * UNPREDICTABLE if S == 1 or DCRS == 0 or ES == 1 (R_XLCP); * we choose to take the UsageFault. */ if ((excret & R_V7M_EXCRET_S_MASK) || @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) break; case 13: /* Return to Thread using Process stack */ case 9: /* Return to Thread using Main stack */ - /* We only need to check NONBASETHRDENA for v7M, because in + /* + * We only need to check NONBASETHRDENA for v7M, because in * v8M this bit does not exist (it is RES1). */ if (!rettobase && @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } if (ufault) { - /* Bad exception return: instead of popping the exception + /* + * Bad exception return: instead of popping the exception * stack, directly take a usage fault on the current stack. */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) switch_v7m_security_state(env, return_to_secure); { - /* The stack pointer we should be reading the exception frame from + /* + * The stack pointer we should be reading the exception frame from * depends on bits in the magic exception return type value (and * for v8M isn't necessarily the stack pointer we will eventually * end up resuming execution with). Get a pointer to the location @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) v7m_stack_read(cpu, &xpsr, frameptr + 0x1c, mmu_idx); if (!pop_ok) { - /* v7m_stack_read() pended a fault, so take it (as a tail + /* + * v7m_stack_read() pended a fault, so take it (as a tail * chained exception on the same stack frame) */ qemu_log_mask(CPU_LOG_INT, "...derived exception on unstacking\n"); @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) return; } - /* Returning from an exception with a PC with bit 0 set is defined + /* + * Returning from an exception with a PC with bit 0 set is defined * behaviour on v8M (bit 0 is ignored), but for v7M it was specified * to be UNPREDICTABLE. In practice actual v7M hardware seems to ignore * the lsbit, and there are several RTOSes out there which incorrectly @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } if (arm_feature(env, ARM_FEATURE_V8)) { - /* For v8M we have to check whether the xPSR exception field + /* + * For v8M we have to check whether the xPSR exception field * matches the EXCRET value for return to handler/thread * before we commit to changing the SP and xPSR. */ bool will_be_handler = (xpsr & XPSR_EXCP) != 0; if (return_to_handler != will_be_handler) { - /* Take an INVPC UsageFault on the current stack. + /* + * Take an INVPC UsageFault on the current stack. * By this point we will have switched to the security state * for the background state, so this UsageFault will target * that state. @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) frameptr += 0x40; } } - /* Undo stack alignment (the SPREALIGN bit indicates that the original + /* + * Undo stack alignment (the SPREALIGN bit indicates that the original * pre-exception SP was not 8-aligned and we added a padding word to * align it, so we undo this by ORing in the bit that increases it * from the current 8-aligned value to the 8-unaligned value. (Adding 4 @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) V7M_CONTROL, SFPA, sfpa); } - /* The restored xPSR exception field will be zero if we're + /* + * The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the * exception return excret specified then this is a UsageFault. * v7M requires we make this check here; v8M did it earlier. */ if (return_to_handler != arm_v7m_is_handler_mode(env)) { - /* Take an INVPC UsageFault by pushing the stack again; + /* + * Take an INVPC UsageFault by pushing the stack again; * we know we're v7M so this is never a Secure UsageFault. */ bool ignore_stackfaults; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) static bool do_v7m_function_return(ARMCPU *cpu) { - /* v8M security extensions magic function return. + /* + * v8M security extensions magic function return. * We may either: * (1) throw an exception (longjump) * (2) return true if we successfully handled the function return @@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu) frame_sp_p = get_v7m_sp_ptr(env, true, threadmode, spsel); frameptr = *frame_sp_p; - /* These loads may throw an exception (for MPU faults). We want to + /* + * These loads may throw an exception (for MPU faults). We want to * do them as secure, so work out what MMU index that is. */ mmu_idx = arm_v7m_mmu_idx_for_secstate(env, true); @@ -XXX,XX +XXX,XX @@ static void arm_log_exception(int idx) static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, uint32_t addr, uint16_t *insn) { - /* Load a 16-bit portion of a v7M instruction, returning true on success, + /* + * Load a 16-bit portion of a v7M instruction, returning true on success, * or false on failure (in which case we will have pended the appropriate * exception). * We need to do the instruction fetch's MPU and SAU checks @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, v8m_security_lookup(env, addr, MMU_INST_FETCH, mmu_idx, &sattrs); if (!sattrs.nsc || sattrs.ns) { - /* This must be the second half of the insn, and it straddles a + /* + * This must be the second half of the insn, and it straddles a * region boundary with the second half not being S&NSC. */ env->v7m.sfsr |= R_V7M_SFSR_INVEP_MASK; @@ -XXX,XX +XXX,XX @@ static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, static bool v7m_handle_execute_nsc(ARMCPU *cpu) { - /* Check whether this attempt to execute code in a Secure & NS-Callable + /* + * Check whether this attempt to execute code in a Secure & NS-Callable * memory region is for an SG instruction; if so, then emulate the * effect of the SG instruction and return true. Otherwise pend * the correct kind of exception and return false. @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) ARMMMUIdx mmu_idx; uint16_t insn; - /* We should never get here unless get_phys_addr_pmsav8() caused + /* + * We should never get here unless get_phys_addr_pmsav8() caused * an exception for NS executing in S&NSC memory. */ assert(!env->v7m.secure); @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) } if (insn != 0xe97f) { - /* Not an SG instruction first half (we choose the IMPDEF + /* + * Not an SG instruction first half (we choose the IMPDEF * early-SG-check option). */ goto gen_invep; @@ -XXX,XX +XXX,XX @@ static bool v7m_handle_execute_nsc(ARMCPU *cpu) } if (insn != 0xe97f) { - /* Not an SG instruction second half (yes, both halves of the SG + /* + * Not an SG instruction second half (yes, both halves of the SG * insn have the same hex value) */ goto gen_invep; } - /* OK, we have confirmed that we really have an SG instruction. + /* + * OK, we have confirmed that we really have an SG instruction. * We know we're NS in S memory so don't need to repeat those checks. */ qemu_log_mask(CPU_LOG_INT, "...really an SG instruction at 0x%08" PRIx32 @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) arm_log_exception(cs->exception_index); - /* For exceptions we just mark as pending on the NVIC, and let that - handle it. */ + /* + * For exceptions we just mark as pending on the NVIC, and let that + * handle it. + */ switch (cs->exception_index) { case EXCP_UDEF: armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE, env->v7m.secure); @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) break; case EXCP_PREFETCH_ABORT: case EXCP_DATA_ABORT: - /* Note that for M profile we don't have a guest facing FSR, but + /* + * Note that for M profile we don't have a guest facing FSR, but * the env->exception.fsr will be populated by the code that * raises the fault, in the A profile short-descriptor format. */ switch (env->exception.fsr & 0xf) { case M_FAKE_FSR_NSC_EXEC: - /* Exception generated when we try to execute code at an address + /* + * Exception generated when we try to execute code at an address * which is marked as Secure & Non-Secure Callable and the CPU * is in the Non-Secure state. The only instruction which can * be executed like this is SG (and that only if both halves of @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) } break; case M_FAKE_FSR_SFAULT: - /* Various flavours of SecureFault for attempts to execute or + /* + * Various flavours of SecureFault for attempts to execute or * access data in the wrong security state. */ switch (cs->exception_index) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_BUS, false); break; default: - /* All other FSR values are either MPU faults or "can't happen + /* + * All other FSR values are either MPU faults or "can't happen * for M profile" cases. */ switch (cs->exception_index) { @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (arm_feature(env, ARM_FEATURE_V8)) { lr = R_V7M_EXCRET_RES1_MASK | R_V7M_EXCRET_DCRS_MASK; - /* The S bit indicates whether we should return to Secure + /* + * The S bit indicates whether we should return to Secure * or NonSecure (ie our current state). * The ES bit indicates whether we're taking this exception * to Secure or NonSecure (ie our target state). We set it @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) v7m_exception_taken(cpu, lr, false, ignore_stackfaults); } -/* Function used to synchronize QEMU's AArch64 register set with AArch32 +/* + * Function used to synchronize QEMU's AArch64 register set with AArch32 * register set. This is necessary when switching between AArch32 and AArch64 * execution state. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env) env->xregs[i] = env->regs[i]; } - /* Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12. + /* + * Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12. * Otherwise, they come from the banked user regs. */ if (mode == ARM_CPU_MODE_FIQ) { @@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env) } } - /* Registers x13-x23 are the various mode SP and FP registers. Registers + /* + * Registers x13-x23 are the various mode SP and FP registers. Registers * r13 and r14 are only copied if we are in that mode, otherwise we copy * from the mode banked register. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env) env->xregs[23] = env->banked_r13[bank_number(ARM_CPU_MODE_UND)]; } - /* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ + /* + * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ * mode, then we can copy from r8-r14. Otherwise, we copy from the * FIQ bank for r8-r14. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_32_to_64(CPUARMState *env) env->pc = env->regs[15]; } -/* Function used to synchronize QEMU's AArch32 register set with AArch64 +/* + * Function used to synchronize QEMU's AArch32 register set with AArch64 * register set. This is necessary when switching between AArch32 and AArch64 * execution state. */ @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) env->regs[i] = env->xregs[i]; } - /* Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12. + /* + * Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12. * Otherwise, we copy x8-x12 into the banked user regs. */ if (mode == ARM_CPU_MODE_FIQ) { @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) } } - /* Registers r13 & r14 depend on the current mode. + /* + * Registers r13 & r14 depend on the current mode. * If we are in a given mode, we copy the corresponding x registers to r13 * and r14. Otherwise, we copy the x register to the banked r13 and r14 * for the mode. @@ -XXX,XX +XXX,XX @@ void aarch64_sync_64_to_32(CPUARMState *env) } else { env->banked_r13[bank_number(ARM_CPU_MODE_USR)] = env->xregs[13]; - /* HYP is an exception in that it does not have its own banked r14 but + /* + * HYP is an exception in that it does not have its own banked r14 but * shares the USR r14 */ if (mode == ARM_CPU_MODE_HYP) { @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return value; } case 0x94: /* CONTROL_NS */ - /* We have to handle this here because unprivileged Secure code + /* + * We have to handle this here because unprivileged Secure code * can read the NS CONTROL register. */ if (!env->v7m.secure) { @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) return env->v7m.faultmask[M_REG_NS]; case 0x98: /* SP_NS */ { - /* This gives the non-secure SP selected based on whether we're + /* + * This gives the non-secure SP selected based on whether we're * currently in handler mode or not, using the NS CONTROL.SPSEL. */ bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_mrs)(CPUARMState *env, uint32_t reg) void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) { - /* We're passed bits [11..0] of the instruction; extract + /* + * We're passed bits [11..0] of the instruction; extract * SYSm and the mask bits. * Invalid combinations of SYSm and mask are UNPREDICTABLE; * we choose to treat them as if the mask bits were valid. @@ -XXX,XX +XXX,XX @@ void HELPER(v7m_msr)(CPUARMState *env, uint32_t maskreg, uint32_t val) return; case 0x98: /* SP_NS */ { - /* This gives the non-secure SP selected based on whether we're + /* + * This gives the non-secure SP selected based on whether we're * currently in handler mode or not, using the NS CONTROL.SPSEL. */ bool spsel = env->v7m.control[M_REG_NS] & R_V7M_CONTROL_SPSEL_MASK; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) bool targetsec = env->v7m.secure; bool is_subpage; - /* Work out what the security state and privilege level we're + /* + * Work out what the security state and privilege level we're * interested in is... */ if (alt) { @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) /* ...and then figure out which MMU index this is */ mmu_idx = arm_v7m_mmu_idx_for_secstate_and_priv(env, targetsec, targetpriv); - /* We know that the MPU and SAU don't care about the access type + /* + * We know that the MPU and SAU don't care about the access type * for our purposes beyond that we don't want to claim to be * an insn fetch, so we arbitrarily call this a read. */ - /* MPU region info only available for privileged or if + /* + * MPU region info only available for privileged or if * inspecting the other MPU state. */ if (arm_current_el(env) != 0 || alt) { @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) { - /* Implement DC ZVA, which zeroes a fixed-length block of memory. + /* + * Implement DC ZVA, which zeroes a fixed-length block of memory. * Note that we do not implement the (architecturally mandated) * alignment fault for attempts to use this on Device memory * (which matches the usual QEMU behaviour of not implementing either @@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) #ifndef CONFIG_USER_ONLY { - /* Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than + /* + * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than * the block size so we might have to do more than one TLB lookup. * We know that in fact for any v8 CPU the page size is at least 4K * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only @@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) } } if (i == maxidx) { - /* If it's all in the TLB it's fair game for just writing to; + /* + * If it's all in the TLB it's fair game for just writing to; * we know we don't need to update dirty status, etc. */ for (i = 0; i < maxidx - 1; i++) { @@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); return; } - /* OK, try a store and see if we can populate the tlb. This + /* + * OK, try a store and see if we can populate the tlb. This * might cause an exception if the memory isn't writable, * in which case we will longjmp out of here. We must for * this purpose use the actual register value passed to us @@ -XXX,XX +XXX,XX @@ void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) } } - /* Slow path (probably attempt to do this to an I/O device or + /* + * Slow path (probably attempt to do this to an I/O device or * similar, or clearing of a block of code we have translations * cached for). Just do a series of byte writes as the architecture * demands. It's not worth trying to use a cpu_physical_memory_map(), diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, { uint32_t syn; - /* ISV is only set for data aborts routed to EL2 and + /* + * ISV is only set for data aborts routed to EL2 and * never for stage-1 page table walks faulting on stage 2. * * Furthermore, ISV is only set for certain kinds of load/stores. @@ -XXX,XX +XXX,XX @@ static inline uint32_t merge_syn_data_abort(uint32_t template_syn, syn = syn_data_abort_no_iss(same_el, ea, 0, s1ptw, is_write, fsc); } else { - /* Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template + /* + * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template * syndrome created at translation time. * Now we create the runtime syndrome with the remaining fields. */ @@ -XXX,XX +XXX,XX @@ void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type, if (target_el == 2 || arm_el_is_aa64(env, target_el) || arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { - /* LPAE format fault status register : bottom 6 bits are + /* + * LPAE format fault status register : bottom 6 bits are * status code in the same form as needed for syndrome */ fsr = arm_fi_to_lfsc(fi); fsc = extract32(fsr, 0, 6); } else { fsr = arm_fi_to_sfsc(fi); - /* Short format FSR : this fault will never actually be reported + /* + * Short format FSR : this fault will never actually be reported * to an EL that uses a syndrome register. Use a (currently) * reserved FSR code in case the constructed syndrome does leak * into the guest somehow. @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); } -/* arm_cpu_do_transaction_failed: handle a memory system error response +/* + * arm_cpu_do_transaction_failed: handle a memory system error response * (eg "no device/memory present at address") by raising an external abort * exception */ @@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn) int bt; uint32_t contextidr; - /* Links to unimplemented or non-context aware breakpoints are + /* + * Links to unimplemented or non-context aware breakpoints are * CONSTRAINED UNPREDICTABLE: either behave as if disabled, or * as if linked to an UNKNOWN context-aware breakpoint (in which * case DBGWCR<n>_EL1.LBN must indicate that breakpoint). @@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn) bt = extract64(bcr, 20, 4); - /* We match the whole register even if this is AArch32 using the + /* + * We match the whole register even if this is AArch32 using the * short descriptor format (in which case it holds both PROCID and ASID), * since we don't implement the optional v7 context ID masking. */ @@ -XXX,XX +XXX,XX @@ static bool linked_bp_matches(ARMCPU *cpu, int lbn) case 9: /* linked VMID match (reserved if no EL2) */ case 11: /* linked context ID and VMID match (reserved if no EL2) */ default: - /* Links to Unlinked context breakpoints must generate no + /* + * Links to Unlinked context breakpoints must generate no * events; we choose to do the same for reserved values too. */ return false; @@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp) CPUARMState *env = &cpu->env; uint64_t cr; int pac, hmc, ssc, wt, lbn; - /* Note that for watchpoints the check is against the CPU security + /* + * Note that for watchpoints the check is against the CPU security * state, not the S/NS attribute on the offending data access. */ bool is_secure = arm_is_secure(env); @@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp) } cr = env->cp15.dbgwcr[n]; if (wp->hitattrs.user) { - /* The LDRT/STRT/LDT/STT "unprivileged access" instructions should + /* + * The LDRT/STRT/LDT/STT "unprivileged access" instructions should * match watchpoints as if they were accesses done at EL0, even if * the CPU is at EL1 or higher. */ @@ -XXX,XX +XXX,XX @@ static bool bp_wp_matches(ARMCPU *cpu, int n, bool is_wp) } cr = env->cp15.dbgbcr[n]; } - /* The WATCHPOINT_HIT flag guarantees us that the watchpoint is + /* + * The WATCHPOINT_HIT flag guarantees us that the watchpoint is * enabled and that the address and access type match; for breakpoints * we know the address matched; check the remaining fields, including * linked breakpoints. We rely on WCR and BCR having the same layout @@ -XXX,XX +XXX,XX @@ static bool check_watchpoints(ARMCPU *cpu) CPUARMState *env = &cpu->env; int n; - /* If watchpoints are disabled globally or we can't take debug + /* + * If watchpoints are disabled globally or we can't take debug * exceptions here then watchpoint firings are ignored. */ if (extract32(env->cp15.mdscr_el1, 15, 1) == 0 @@ -XXX,XX +XXX,XX @@ static bool check_breakpoints(ARMCPU *cpu) CPUARMState *env = &cpu->env; int n; - /* If breakpoints are disabled globally or we can't take debug + /* + * If breakpoints are disabled globally or we can't take debug * exceptions here then breakpoint firings are ignored. */ if (extract32(env->cp15.mdscr_el1, 15, 1) == 0 @@ -XXX,XX +XXX,XX @@ void HELPER(check_breakpoints)(CPUARMState *env) bool arm_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) { - /* Called by core code when a CPU watchpoint fires; need to check if this + /* + * Called by core code when a CPU watchpoint fires; need to check if this * is also an architectural watchpoint match. */ ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len) ARMCPU *cpu = ARM_CPU(cs); CPUARMState *env = &cpu->env; - /* In BE32 system mode, target memory is stored byteswapped (on a + /* + * In BE32 system mode, target memory is stored byteswapped (on a * little-endian host system), and by the time we reach here (via an * opcode helper) the addresses of subword accesses have been adjusted * to account for that, which means that watchpoints will not match. @@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len) void arm_debug_excp_handler(CPUState *cs) { - /* Called by core code when a watchpoint or breakpoint fires; + /* + * Called by core code when a watchpoint or breakpoint fires; * need to check which one and raise the appropriate exception. */ ARMCPU *cpu = ARM_CPU(cs); @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) uint64_t pc = is_a64(env) ? env->pc : env->regs[15]; bool same_el = (arm_debug_target_el(env) == arm_current_el(env)); - /* (1) GDB breakpoints should be handled first. + /* + * (1) GDB breakpoints should be handled first. * (2) Do not raise a CPU exception if no CPU breakpoint has fired, * since singlestep is also done by generating a debug internal * exception. @@ -XXX,XX +XXX,XX @@ void arm_debug_excp_handler(CPUState *cs) } env->exception.fsr = arm_debug_exception_fsr(env); - /* FAR is UNKNOWN: clear vaddress to avoid potentially exposing + /* + * FAR is UNKNOWN: clear vaddress to avoid potentially exposing * values to the guest that it shouldn't be able to see at its * exception/security level. */ diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) set_default_nan_mode(dnan_enabled, &env->vfp.fp_status_f16); } - /* The exception flags are ORed together when we read fpscr so we + /* + * The exception flags are ORed together when we read fpscr so we * only need to preserve the current state in one of our * float_status values. */ -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Since we'll move this code around, fix its style first. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate.c | 11 ++++++----- target/arm/vfp_helper.c | 36 ++++++++++++++++++++++++------------ 2 files changed, 30 insertions(+), 17 deletions(-) diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) loaded_base = 0; loaded_var = NULL; n = 0; - for(i=0;i<16;i++) { + for (i = 0; i < 16; i++) { if (insn & (1 << i)) n++; } @@ -XXX,XX +XXX,XX @@ static void disas_arm_insn(DisasContext *s, unsigned int insn) } } j = 0; - for(i=0;i<16;i++) { + for (i = 0; i < 16; i++) { if (insn & (1 << i)) { if (is_load) { /* load */ @@ -XXX,XX +XXX,XX @@ void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags) return; } - for(i=0;i<16;i++) { + for (i = 0; i < 16; i++) { qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]); - if ((i % 4) == 3) + if ((i % 4) == 3) { qemu_fprintf(f, "\n"); - else + } else { qemu_fprintf(f, " "); + } } if (arm_feature(env, ARM_FEATURE_M)) { diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_from_host(int host_bits) { int target_bits = 0; - if (host_bits & float_flag_invalid) + if (host_bits & float_flag_invalid) { target_bits |= 1; - if (host_bits & float_flag_divbyzero) + } + if (host_bits & float_flag_divbyzero) { target_bits |= 2; - if (host_bits & float_flag_overflow) + } + if (host_bits & float_flag_overflow) { target_bits |= 4; - if (host_bits & (float_flag_underflow | float_flag_output_denormal)) + } + if (host_bits & (float_flag_underflow | float_flag_output_denormal)) { target_bits |= 8; - if (host_bits & float_flag_inexact) + } + if (host_bits & float_flag_inexact) { target_bits |= 0x10; - if (host_bits & float_flag_input_denormal) + } + if (host_bits & float_flag_input_denormal) { target_bits |= 0x80; + } return target_bits; } @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits) { int host_bits = 0; - if (target_bits & 1) + if (target_bits & 1) { host_bits |= float_flag_invalid; - if (target_bits & 2) + } + if (target_bits & 2) { host_bits |= float_flag_divbyzero; - if (target_bits & 4) + } + if (target_bits & 4) { host_bits |= float_flag_overflow; - if (target_bits & 8) + } + if (target_bits & 8) { host_bits |= float_flag_underflow; - if (target_bits & 0x10) + } + if (target_bits & 0x10) { host_bits |= float_flag_inexact; - if (target_bits & 0x80) + } + if (target_bits & 0x80) { host_bits |= float_flag_input_denormal; + } return host_bits; } -- 2.20.1 From: Samuel Ortiz <sameo@linux.intel.com> Those helpers are a software implementation of the ARM v8 memory zeroing op code. They should be moved to the op helper file, which is going to eventually be built only when TCG is enabled. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Robert Bradford <robert.bradford@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-10-philmd@redhat.com [PMD: Rebased] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/helper.c | 92 ----------------------------------------- target/arm/op_helper.c | 93 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 93 insertions(+), 92 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, #endif } -void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) -{ - /* - * Implement DC ZVA, which zeroes a fixed-length block of memory. - * Note that we do not implement the (architecturally mandated) - * alignment fault for attempts to use this on Device memory - * (which matches the usual QEMU behaviour of not implementing either - * alignment faults or any memory attribute handling). - */ - - ARMCPU *cpu = env_archcpu(env); - uint64_t blocklen = 4 << cpu->dcz_blocksize; - uint64_t vaddr = vaddr_in & ~(blocklen - 1); - -#ifndef CONFIG_USER_ONLY - { - /* - * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than - * the block size so we might have to do more than one TLB lookup. - * We know that in fact for any v8 CPU the page size is at least 4K - * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only - * 1K as an artefact of legacy v5 subpage support being present in the - * same QEMU executable. So in practice the hostaddr[] array has - * two entries, given the current setting of TARGET_PAGE_BITS_MIN. - */ - int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); - void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; - int try, i; - unsigned mmu_idx = cpu_mmu_index(env, false); - TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); - - assert(maxidx <= ARRAY_SIZE(hostaddr)); - - for (try = 0; try < 2; try++) { - - for (i = 0; i < maxidx; i++) { - hostaddr[i] = tlb_vaddr_to_host(env, - vaddr + TARGET_PAGE_SIZE * i, - 1, mmu_idx); - if (!hostaddr[i]) { - break; - } - } - if (i == maxidx) { - /* - * If it's all in the TLB it's fair game for just writing to; - * we know we don't need to update dirty status, etc. - */ - for (i = 0; i < maxidx - 1; i++) { - memset(hostaddr[i], 0, TARGET_PAGE_SIZE); - } - memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); - return; - } - /* - * OK, try a store and see if we can populate the tlb. This - * might cause an exception if the memory isn't writable, - * in which case we will longjmp out of here. We must for - * this purpose use the actual register value passed to us - * so that we get the fault address right. - */ - helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); - /* Now we can populate the other TLB entries, if any */ - for (i = 0; i < maxidx; i++) { - uint64_t va = vaddr + TARGET_PAGE_SIZE * i; - if (va != (vaddr_in & TARGET_PAGE_MASK)) { - helper_ret_stb_mmu(env, va, 0, oi, GETPC()); - } - } - } - - /* - * Slow path (probably attempt to do this to an I/O device or - * similar, or clearing of a block of code we have translations - * cached for). Just do a series of byte writes as the architecture - * demands. It's not worth trying to use a cpu_physical_memory_map(), - * memset(), unmap() sequence here because: - * + we'd need to account for the blocksize being larger than a page - * + the direct-RAM access case is almost always going to be dealt - * with in the fastpath code above, so there's no speed benefit - * + we would have to deal with the map returning NULL because the - * bounce buffer was in use - */ - for (i = 0; i < blocklen; i++) { - helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); - } - } -#else - memset(g2h(vaddr), 0, blocklen); -#endif -} - /* Note that signed overflow is undefined in C. The following routines are careful to use unsigned types where modulo arithmetic is required. Failure to do so _will_ break on newer gcc. */ diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ * License along with this library; if not, see <http://www.gnu.org/licenses/>. */ #include "qemu/osdep.h" +#include "qemu/units.h" #include "qemu/log.h" #include "qemu/main-loop.h" #include "cpu.h" @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(ror_cc)(CPUARMState *env, uint32_t x, uint32_t i) return ((uint32_t)x >> shift) | (x << (32 - shift)); } } + +void HELPER(dc_zva)(CPUARMState *env, uint64_t vaddr_in) +{ + /* + * Implement DC ZVA, which zeroes a fixed-length block of memory. + * Note that we do not implement the (architecturally mandated) + * alignment fault for attempts to use this on Device memory + * (which matches the usual QEMU behaviour of not implementing either + * alignment faults or any memory attribute handling). + */ + + ARMCPU *cpu = env_archcpu(env); + uint64_t blocklen = 4 << cpu->dcz_blocksize; + uint64_t vaddr = vaddr_in & ~(blocklen - 1); + +#ifndef CONFIG_USER_ONLY + { + /* + * Slightly awkwardly, QEMU's TARGET_PAGE_SIZE may be less than + * the block size so we might have to do more than one TLB lookup. + * We know that in fact for any v8 CPU the page size is at least 4K + * and the block size must be 2K or less, but TARGET_PAGE_SIZE is only + * 1K as an artefact of legacy v5 subpage support being present in the + * same QEMU executable. So in practice the hostaddr[] array has + * two entries, given the current setting of TARGET_PAGE_BITS_MIN. + */ + int maxidx = DIV_ROUND_UP(blocklen, TARGET_PAGE_SIZE); + void *hostaddr[DIV_ROUND_UP(2 * KiB, 1 << TARGET_PAGE_BITS_MIN)]; + int try, i; + unsigned mmu_idx = cpu_mmu_index(env, false); + TCGMemOpIdx oi = make_memop_idx(MO_UB, mmu_idx); + + assert(maxidx <= ARRAY_SIZE(hostaddr)); + + for (try = 0; try < 2; try++) { + + for (i = 0; i < maxidx; i++) { + hostaddr[i] = tlb_vaddr_to_host(env, + vaddr + TARGET_PAGE_SIZE * i, + 1, mmu_idx); + if (!hostaddr[i]) { + break; + } + } + if (i == maxidx) { + /* + * If it's all in the TLB it's fair game for just writing to; + * we know we don't need to update dirty status, etc. + */ + for (i = 0; i < maxidx - 1; i++) { + memset(hostaddr[i], 0, TARGET_PAGE_SIZE); + } + memset(hostaddr[i], 0, blocklen - (i * TARGET_PAGE_SIZE)); + return; + } + /* + * OK, try a store and see if we can populate the tlb. This + * might cause an exception if the memory isn't writable, + * in which case we will longjmp out of here. We must for + * this purpose use the actual register value passed to us + * so that we get the fault address right. + */ + helper_ret_stb_mmu(env, vaddr_in, 0, oi, GETPC()); + /* Now we can populate the other TLB entries, if any */ + for (i = 0; i < maxidx; i++) { + uint64_t va = vaddr + TARGET_PAGE_SIZE * i; + if (va != (vaddr_in & TARGET_PAGE_MASK)) { + helper_ret_stb_mmu(env, va, 0, oi, GETPC()); + } + } + } + + /* + * Slow path (probably attempt to do this to an I/O device or + * similar, or clearing of a block of code we have translations + * cached for). Just do a series of byte writes as the architecture + * demands. It's not worth trying to use a cpu_physical_memory_map(), + * memset(), unmap() sequence here because: + * + we'd need to account for the blocksize being larger than a page + * + the direct-RAM access case is almost always going to be dealt + * with in the fastpath code above, so there's no speed benefit + * + we would have to deal with the map returning NULL because the + * bounce buffer was in use + */ + for (i = 0; i < blocklen; i++) { + helper_ret_stb_mmu(env, vaddr + i, 0, oi, GETPC()); + } + } +#else + memset(g2h(vaddr), 0, blocklen); +#endif +} -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Suggested-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-11-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 - target/arm/translate.h | 5 - target/arm/cpu.c | 226 +++++++++++++++++++++++++++++++++++++ target/arm/translate-a64.c | 128 --------------------- target/arm/translate.c | 88 --------------- 5 files changed, 226 insertions(+), 223 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ void arm_cpu_do_interrupt(CPUState *cpu); void arm_v7m_cpu_do_interrupt(CPUState *cpu); bool arm_cpu_exec_interrupt(CPUState *cpu, int int_req); -void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags); - hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cpu, vaddr addr, MemTxAttrs *attrs); diff --git a/target/arm/translate.h b/target/arm/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.h +++ b/target/arm/translate.h @@ -XXX,XX +XXX,XX @@ static inline void disas_set_insn_syndrome(DisasContext *s, uint32_t syn) #ifdef TARGET_AARCH64 void a64_translate_init(void); void gen_a64_set_pc_im(uint64_t val); -void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags); extern const TranslatorOps aarch64_translator_ops; #else static inline void a64_translate_init(void) @@ -XXX,XX +XXX,XX @@ static inline void a64_translate_init(void) static inline void gen_a64_set_pc_im(uint64_t val) { } - -static inline void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) -{ -} #endif void arm_test_cc(DisasCompare *cmp, int cc); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" +#include "qemu/qemu-print.h" #include "qemu-common.h" #include "target/arm/idau.h" #include "qemu/module.h" @@ -XXX,XX +XXX,XX @@ static void arm_disas_set_info(CPUState *cpu, disassemble_info *info) #endif } +#ifdef TARGET_AARCH64 + +static void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) +{ + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + uint32_t psr = pstate_read(env); + int i; + int el = arm_current_el(env); + const char *ns_status; + + qemu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); + for (i = 0; i < 32; i++) { + if (i == 31) { + qemu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]); + } else { + qemu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i], + (i + 2) % 3 ? " " : "\n"); + } + } + + if (arm_feature(env, ARM_FEATURE_EL3) && el != 3) { + ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S "; + } else { + ns_status = ""; + } + qemu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c", + psr, + psr & PSTATE_N ? 'N' : '-', + psr & PSTATE_Z ? 'Z' : '-', + psr & PSTATE_C ? 'C' : '-', + psr & PSTATE_V ? 'V' : '-', + ns_status, + el, + psr & PSTATE_SP ? 'h' : 't'); + + if (cpu_isar_feature(aa64_bti, cpu)) { + qemu_fprintf(f, " BTYPE=%d", (psr & PSTATE_BTYPE) >> 10); + } + if (!(flags & CPU_DUMP_FPU)) { + qemu_fprintf(f, "\n"); + return; + } + if (fp_exception_el(env, el) != 0) { + qemu_fprintf(f, " FPU disabled\n"); + return; + } + qemu_fprintf(f, " FPCR=%08x FPSR=%08x\n", + vfp_get_fpcr(env), vfp_get_fpsr(env)); + + if (cpu_isar_feature(aa64_sve, cpu) && sve_exception_el(env, el) == 0) { + int j, zcr_len = sve_zcr_len_for_el(env, el); + + for (i = 0; i <= FFR_PRED_NUM; i++) { + bool eol; + if (i == FFR_PRED_NUM) { + qemu_fprintf(f, "FFR="); + /* It's last, so end the line. */ + eol = true; + } else { + qemu_fprintf(f, "P%02d=", i); + switch (zcr_len) { + case 0: + eol = i % 8 == 7; + break; + case 1: + eol = i % 6 == 5; + break; + case 2: + case 3: + eol = i % 3 == 2; + break; + default: + /* More than one quadword per predicate. */ + eol = true; + break; + } + } + for (j = zcr_len / 4; j >= 0; j--) { + int digits; + if (j * 4 + 4 <= zcr_len + 1) { + digits = 16; + } else { + digits = (zcr_len % 4 + 1) * 4; + } + qemu_fprintf(f, "%0*" PRIx64 "%s", digits, + env->vfp.pregs[i].p[j], + j ? ":" : eol ? "\n" : " "); + } + } + + for (i = 0; i < 32; i++) { + if (zcr_len == 0) { + qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, env->vfp.zregs[i].d[1], + env->vfp.zregs[i].d[0], i & 1 ? "\n" : " "); + } else if (zcr_len == 1) { + qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 + ":%016" PRIx64 ":%016" PRIx64 "\n", + i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2], + env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]); + } else { + for (j = zcr_len; j >= 0; j--) { + bool odd = (zcr_len - j) % 2 != 0; + if (j == zcr_len) { + qemu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1); + } else if (!odd) { + if (j > 0) { + qemu_fprintf(f, " [%x-%x]=", j, j - 1); + } else { + qemu_fprintf(f, " [%x]=", j); + } + } + qemu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s", + env->vfp.zregs[i].d[j * 2 + 1], + env->vfp.zregs[i].d[j * 2], + odd || j == 0 ? "\n" : ":"); + } + } + } + } else { + for (i = 0; i < 32; i++) { + uint64_t *q = aa64_vfp_qreg(env, i); + qemu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s", + i, q[1], q[0], (i & 1 ? "\n" : " ")); + } + } +} + +#else + +static inline void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) +{ + g_assert_not_reached(); +} + +#endif + +static void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags) +{ + ARMCPU *cpu = ARM_CPU(cs); + CPUARMState *env = &cpu->env; + int i; + + if (is_a64(env)) { + aarch64_cpu_dump_state(cs, f, flags); + return; + } + + for (i = 0; i < 16; i++) { + qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]); + if ((i % 4) == 3) { + qemu_fprintf(f, "\n"); + } else { + qemu_fprintf(f, " "); + } + } + + if (arm_feature(env, ARM_FEATURE_M)) { + uint32_t xpsr = xpsr_read(env); + const char *mode; + const char *ns_status = ""; + + if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { + ns_status = env->v7m.secure ? "S " : "NS "; + } + + if (xpsr & XPSR_EXCP) { + mode = "handler"; + } else { + if (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_NPRIV_MASK) { + mode = "unpriv-thread"; + } else { + mode = "priv-thread"; + } + } + + qemu_fprintf(f, "XPSR=%08x %c%c%c%c %c %s%s\n", + xpsr, + xpsr & XPSR_N ? 'N' : '-', + xpsr & XPSR_Z ? 'Z' : '-', + xpsr & XPSR_C ? 'C' : '-', + xpsr & XPSR_V ? 'V' : '-', + xpsr & XPSR_T ? 'T' : 'A', + ns_status, + mode); + } else { + uint32_t psr = cpsr_read(env); + const char *ns_status = ""; + + if (arm_feature(env, ARM_FEATURE_EL3) && + (psr & CPSR_M) != ARM_CPU_MODE_MON) { + ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S "; + } + + qemu_fprintf(f, "PSR=%08x %c%c%c%c %c %s%s%d\n", + psr, + psr & CPSR_N ? 'N' : '-', + psr & CPSR_Z ? 'Z' : '-', + psr & CPSR_C ? 'C' : '-', + psr & CPSR_V ? 'V' : '-', + psr & CPSR_T ? 'T' : 'A', + ns_status, + aarch32_mode_name(psr), (psr & 0x10) ? 32 : 26); + } + + if (flags & CPU_DUMP_FPU) { + int numvfpregs = 0; + if (arm_feature(env, ARM_FEATURE_VFP)) { + numvfpregs += 16; + } + if (arm_feature(env, ARM_FEATURE_VFP3)) { + numvfpregs += 16; + } + for (i = 0; i < numvfpregs; i++) { + uint64_t v = *aa32_vfp_dreg(env, i); + qemu_fprintf(f, "s%02d=%08x s%02d=%08x d%02d=%016" PRIx64 "\n", + i * 2, (uint32_t)v, + i * 2 + 1, (uint32_t)(v >> 32), + i, v); + } + qemu_fprintf(f, "FPSCR: %08x\n", vfp_get_fpscr(env)); + } +} + uint64_t arm_cpu_mp_affinity(int idx, uint8_t clustersz) { uint32_t Aff1 = idx / clustersz; diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ #include "translate.h" #include "internals.h" #include "qemu/host-utils.h" -#include "qemu/qemu-print.h" #include "hw/semihosting/semihost.h" #include "exec/gen-icount.h" @@ -XXX,XX +XXX,XX @@ static void set_btype(DisasContext *s, int val) s->btype = -1; } -void aarch64_cpu_dump_state(CPUState *cs, FILE *f, int flags) -{ - ARMCPU *cpu = ARM_CPU(cs); - CPUARMState *env = &cpu->env; - uint32_t psr = pstate_read(env); - int i; - int el = arm_current_el(env); - const char *ns_status; - - qemu_fprintf(f, " PC=%016" PRIx64 " ", env->pc); - for (i = 0; i < 32; i++) { - if (i == 31) { - qemu_fprintf(f, " SP=%016" PRIx64 "\n", env->xregs[i]); - } else { - qemu_fprintf(f, "X%02d=%016" PRIx64 "%s", i, env->xregs[i], - (i + 2) % 3 ? " " : "\n"); - } - } - - if (arm_feature(env, ARM_FEATURE_EL3) && el != 3) { - ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S "; - } else { - ns_status = ""; - } - qemu_fprintf(f, "PSTATE=%08x %c%c%c%c %sEL%d%c", - psr, - psr & PSTATE_N ? 'N' : '-', - psr & PSTATE_Z ? 'Z' : '-', - psr & PSTATE_C ? 'C' : '-', - psr & PSTATE_V ? 'V' : '-', - ns_status, - el, - psr & PSTATE_SP ? 'h' : 't'); - - if (cpu_isar_feature(aa64_bti, cpu)) { - qemu_fprintf(f, " BTYPE=%d", (psr & PSTATE_BTYPE) >> 10); - } - if (!(flags & CPU_DUMP_FPU)) { - qemu_fprintf(f, "\n"); - return; - } - if (fp_exception_el(env, el) != 0) { - qemu_fprintf(f, " FPU disabled\n"); - return; - } - qemu_fprintf(f, " FPCR=%08x FPSR=%08x\n", - vfp_get_fpcr(env), vfp_get_fpsr(env)); - - if (cpu_isar_feature(aa64_sve, cpu) && sve_exception_el(env, el) == 0) { - int j, zcr_len = sve_zcr_len_for_el(env, el); - - for (i = 0; i <= FFR_PRED_NUM; i++) { - bool eol; - if (i == FFR_PRED_NUM) { - qemu_fprintf(f, "FFR="); - /* It's last, so end the line. */ - eol = true; - } else { - qemu_fprintf(f, "P%02d=", i); - switch (zcr_len) { - case 0: - eol = i % 8 == 7; - break; - case 1: - eol = i % 6 == 5; - break; - case 2: - case 3: - eol = i % 3 == 2; - break; - default: - /* More than one quadword per predicate. */ - eol = true; - break; - } - } - for (j = zcr_len / 4; j >= 0; j--) { - int digits; - if (j * 4 + 4 <= zcr_len + 1) { - digits = 16; - } else { - digits = (zcr_len % 4 + 1) * 4; - } - qemu_fprintf(f, "%0*" PRIx64 "%s", digits, - env->vfp.pregs[i].p[j], - j ? ":" : eol ? "\n" : " "); - } - } - - for (i = 0; i < 32; i++) { - if (zcr_len == 0) { - qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 "%s", - i, env->vfp.zregs[i].d[1], - env->vfp.zregs[i].d[0], i & 1 ? "\n" : " "); - } else if (zcr_len == 1) { - qemu_fprintf(f, "Z%02d=%016" PRIx64 ":%016" PRIx64 - ":%016" PRIx64 ":%016" PRIx64 "\n", - i, env->vfp.zregs[i].d[3], env->vfp.zregs[i].d[2], - env->vfp.zregs[i].d[1], env->vfp.zregs[i].d[0]); - } else { - for (j = zcr_len; j >= 0; j--) { - bool odd = (zcr_len - j) % 2 != 0; - if (j == zcr_len) { - qemu_fprintf(f, "Z%02d[%x-%x]=", i, j, j - 1); - } else if (!odd) { - if (j > 0) { - qemu_fprintf(f, " [%x-%x]=", j, j - 1); - } else { - qemu_fprintf(f, " [%x]=", j); - } - } - qemu_fprintf(f, "%016" PRIx64 ":%016" PRIx64 "%s", - env->vfp.zregs[i].d[j * 2 + 1], - env->vfp.zregs[i].d[j * 2], - odd || j == 0 ? "\n" : ":"); - } - } - } - } else { - for (i = 0; i < 32; i++) { - uint64_t *q = aa64_vfp_qreg(env, i); - qemu_fprintf(f, "Q%02d=%016" PRIx64 ":%016" PRIx64 "%s", - i, q[1], q[0], (i & 1 ? "\n" : " ")); - } - } -} - void gen_a64_set_pc_im(uint64_t val) { tcg_gen_movi_i64(cpu_pc, val); diff --git a/target/arm/translate.c b/target/arm/translate.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate.c +++ b/target/arm/translate.c @@ -XXX,XX +XXX,XX @@ #include "tcg-op-gvec.h" #include "qemu/log.h" #include "qemu/bitops.h" -#include "qemu/qemu-print.h" #include "arm_ldst.h" #include "hw/semihosting/semihost.h" @@ -XXX,XX +XXX,XX @@ void gen_intermediate_code(CPUState *cpu, TranslationBlock *tb, int max_insns) translator_loop(ops, &dc.base, cpu, tb, max_insns); } -void arm_cpu_dump_state(CPUState *cs, FILE *f, int flags) -{ - ARMCPU *cpu = ARM_CPU(cs); - CPUARMState *env = &cpu->env; - int i; - - if (is_a64(env)) { - aarch64_cpu_dump_state(cs, f, flags); - return; - } - - for (i = 0; i < 16; i++) { - qemu_fprintf(f, "R%02d=%08x", i, env->regs[i]); - if ((i % 4) == 3) { - qemu_fprintf(f, "\n"); - } else { - qemu_fprintf(f, " "); - } - } - - if (arm_feature(env, ARM_FEATURE_M)) { - uint32_t xpsr = xpsr_read(env); - const char *mode; - const char *ns_status = ""; - - if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - ns_status = env->v7m.secure ? "S " : "NS "; - } - - if (xpsr & XPSR_EXCP) { - mode = "handler"; - } else { - if (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_NPRIV_MASK) { - mode = "unpriv-thread"; - } else { - mode = "priv-thread"; - } - } - - qemu_fprintf(f, "XPSR=%08x %c%c%c%c %c %s%s\n", - xpsr, - xpsr & XPSR_N ? 'N' : '-', - xpsr & XPSR_Z ? 'Z' : '-', - xpsr & XPSR_C ? 'C' : '-', - xpsr & XPSR_V ? 'V' : '-', - xpsr & XPSR_T ? 'T' : 'A', - ns_status, - mode); - } else { - uint32_t psr = cpsr_read(env); - const char *ns_status = ""; - - if (arm_feature(env, ARM_FEATURE_EL3) && - (psr & CPSR_M) != ARM_CPU_MODE_MON) { - ns_status = env->cp15.scr_el3 & SCR_NS ? "NS " : "S "; - } - - qemu_fprintf(f, "PSR=%08x %c%c%c%c %c %s%s%d\n", - psr, - psr & CPSR_N ? 'N' : '-', - psr & CPSR_Z ? 'Z' : '-', - psr & CPSR_C ? 'C' : '-', - psr & CPSR_V ? 'V' : '-', - psr & CPSR_T ? 'T' : 'A', - ns_status, - aarch32_mode_name(psr), (psr & 0x10) ? 32 : 26); - } - - if (flags & CPU_DUMP_FPU) { - int numvfpregs = 0; - if (arm_feature(env, ARM_FEATURE_VFP)) { - numvfpregs += 16; - } - if (arm_feature(env, ARM_FEATURE_VFP3)) { - numvfpregs += 16; - } - for (i = 0; i < numvfpregs; i++) { - uint64_t v = *aa32_vfp_dreg(env, i); - qemu_fprintf(f, "s%02d=%08x s%02d=%08x d%02d=%016" PRIx64 "\n", - i * 2, (uint32_t)v, - i * 2 + 1, (uint32_t)(v >> 32), - i, v); - } - qemu_fprintf(f, "FPSCR: %08x\n", vfp_get_fpscr(env)); - } -} - void restore_state_to_opc(CPUARMState *env, TranslationBlock *tb, target_ulong *data) { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> In the next commit we will split the TLB related routines of this file, and this function will also be called in the new file. Declare it in the "internals.h" header. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-12-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 16 ++++++++++++++++ target/arm/helper.c | 21 +++++---------------- 2 files changed, 21 insertions(+), 16 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline int exception_target_el(CPUARMState *env) return target_el; } +#ifndef CONFIG_USER_ONLY + +/* Cacheability and shareability attributes for a memory access */ +typedef struct ARMCacheAttrs { + unsigned int attrs:8; /* as in the MAIR register encoding */ + unsigned int shareability:2; /* as in the SH field of the VMSAv8-64 PTEs */ +} ARMCacheAttrs; + +bool get_phys_addr(CPUARMState *env, target_ulong address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, + target_ulong *page_size, + ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs); + +#endif /* !CONFIG_USER_ONLY */ + #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */ #ifndef CONFIG_USER_ONLY -/* Cacheability and shareability attributes for a memory access */ -typedef struct ARMCacheAttrs { - unsigned int attrs:8; /* as in the MAIR register encoding */ - unsigned int shareability:2; /* as in the SH field of the VMSAv8-64 PTEs */ -} ARMCacheAttrs; - -static bool get_phys_addr(CPUARMState *env, target_ulong address, - MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, - target_ulong *page_size, - ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs); static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, MMUAccessType access_type, ARMMMUIdx mmu_idx, @@ -XXX,XX +XXX,XX @@ static ARMCacheAttrs combine_cacheattrs(ARMCacheAttrs s1, ARMCacheAttrs s2) * @fi: set to fault info if the translation fails * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes */ -static bool get_phys_addr(CPUARMState *env, target_ulong address, - MMUAccessType access_type, ARMMMUIdx mmu_idx, - hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, - target_ulong *page_size, - ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) +bool get_phys_addr(CPUARMState *env, target_ulong address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, + target_ulong *page_size, + ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) { if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) { /* Call ourselves recursively to do the stage 1 and then stage 2 -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> These routines are TCG specific. The arm_deliver_fault() function is only used within the new helper. Make it static. Suggested-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-13-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/Makefile.objs | 1 + target/arm/internals.h | 3 - target/arm/cpu.c | 6 +- target/arm/helper.c | 53 ----------- target/arm/op_helper.c | 135 -------------------------- target/arm/tlb_helper.c | 200 +++++++++++++++++++++++++++++++++++++++ 6 files changed, 205 insertions(+), 193 deletions(-) create mode 100644 target/arm/tlb_helper.c diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/target/arm/Makefile.objs +++ b/target/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ target/arm/translate-sve.o: target/arm/decode-sve.inc.c target/arm/translate.o: target/arm/decode-vfp.inc.c target/arm/translate.o: target/arm/decode-vfp-uncond.inc.c +obj-y += tlb_helper.o obj-y += translate.o op_helper.o obj-y += crypto_helper.o obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, MMUAccessType access_type, int mmu_idx, bool probe, uintptr_t retaddr); -void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) QEMU_NORETURN; - /* Return true if the stage 1 translation regime is using LPAE format page * tables */ bool arm_s1_regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx); diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_class_init(ObjectClass *oc, void *data) cc->gdb_write_register = arm_cpu_gdb_write_register; #ifndef CONFIG_USER_ONLY cc->do_interrupt = arm_cpu_do_interrupt; - cc->do_unaligned_access = arm_cpu_do_unaligned_access; - cc->do_transaction_failed = arm_cpu_do_transaction_failed; cc->get_phys_page_attrs_debug = arm_cpu_get_phys_page_attrs_debug; cc->asidx_from_attrs = arm_asidx_from_attrs; cc->vmsd = &vmstate_arm_cpu; @@ -XXX,XX +XXX,XX @@ static void arm_cpu_class_init(ObjectClass *oc, void *data) #ifdef CONFIG_TCG cc->tcg_initialize = arm_translate_init; cc->tlb_fill = arm_cpu_tlb_fill; +#if !defined(CONFIG_USER_ONLY) + cc->do_unaligned_access = arm_cpu_do_unaligned_access; + cc->do_transaction_failed = arm_cpu_do_transaction_failed; +#endif /* CONFIG_TCG && !CONFIG_USER_ONLY */ #endif } diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(v7m_tt)(CPUARMState *env, uint32_t addr, uint32_t op) #endif -bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, - MMUAccessType access_type, int mmu_idx, - bool probe, uintptr_t retaddr) -{ - ARMCPU *cpu = ARM_CPU(cs); - -#ifdef CONFIG_USER_ONLY - cpu->env.exception.vaddress = address; - if (access_type == MMU_INST_FETCH) { - cs->exception_index = EXCP_PREFETCH_ABORT; - } else { - cs->exception_index = EXCP_DATA_ABORT; - } - cpu_loop_exit_restore(cs, retaddr); -#else - hwaddr phys_addr; - target_ulong page_size; - int prot, ret; - MemTxAttrs attrs = {}; - ARMMMUFaultInfo fi = {}; - - /* - * Walk the page table and (if the mapping exists) add the page - * to the TLB. On success, return true. Otherwise, if probing, - * return false. Otherwise populate fsr with ARM DFSR/IFSR fault - * register format, and signal the fault. - */ - ret = get_phys_addr(&cpu->env, address, access_type, - core_to_arm_mmu_idx(&cpu->env, mmu_idx), - &phys_addr, &attrs, &prot, &page_size, &fi, NULL); - if (likely(!ret)) { - /* - * Map a single [sub]page. Regions smaller than our declared - * target page size are handled specially, so for those we - * pass in the exact addresses. - */ - if (page_size >= TARGET_PAGE_SIZE) { - phys_addr &= TARGET_PAGE_MASK; - address &= TARGET_PAGE_MASK; - } - tlb_set_page_with_attrs(cs, address, phys_addr, attrs, - prot, mmu_idx, page_size); - return true; - } else if (probe) { - return false; - } else { - /* now we have a real cpu fault */ - cpu_restore_state(cs, retaddr, true); - arm_deliver_fault(cpu, address, access_type, mmu_idx, &fi); - } -#endif -} - /* Note that signed overflow is undefined in C. The following routines are careful to use unsigned types where modulo arithmetic is required. Failure to do so _will_ break on newer gcc. */ diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(neon_tbl)(uint32_t ireg, uint32_t def, void *vn, return val; } -#if !defined(CONFIG_USER_ONLY) - -static inline uint32_t merge_syn_data_abort(uint32_t template_syn, - unsigned int target_el, - bool same_el, bool ea, - bool s1ptw, bool is_write, - int fsc) -{ - uint32_t syn; - - /* - * ISV is only set for data aborts routed to EL2 and - * never for stage-1 page table walks faulting on stage 2. - * - * Furthermore, ISV is only set for certain kinds of load/stores. - * If the template syndrome does not have ISV set, we should leave - * it cleared. - * - * See ARMv8 specs, D7-1974: - * ISS encoding for an exception from a Data Abort, the - * ISV field. - */ - if (!(template_syn & ARM_EL_ISV) || target_el != 2 || s1ptw) { - syn = syn_data_abort_no_iss(same_el, - ea, 0, s1ptw, is_write, fsc); - } else { - /* - * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template - * syndrome created at translation time. - * Now we create the runtime syndrome with the remaining fields. - */ - syn = syn_data_abort_with_iss(same_el, - 0, 0, 0, 0, 0, - ea, 0, s1ptw, is_write, fsc, - false); - /* Merge the runtime syndrome with the template syndrome. */ - syn |= template_syn; - } - return syn; -} - -void arm_deliver_fault(ARMCPU *cpu, vaddr addr, MMUAccessType access_type, - int mmu_idx, ARMMMUFaultInfo *fi) -{ - CPUARMState *env = &cpu->env; - int target_el; - bool same_el; - uint32_t syn, exc, fsr, fsc; - ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); - - target_el = exception_target_el(env); - if (fi->stage2) { - target_el = 2; - env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; - } - same_el = (arm_current_el(env) == target_el); - - if (target_el == 2 || arm_el_is_aa64(env, target_el) || - arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { - /* - * LPAE format fault status register : bottom 6 bits are - * status code in the same form as needed for syndrome - */ - fsr = arm_fi_to_lfsc(fi); - fsc = extract32(fsr, 0, 6); - } else { - fsr = arm_fi_to_sfsc(fi); - /* - * Short format FSR : this fault will never actually be reported - * to an EL that uses a syndrome register. Use a (currently) - * reserved FSR code in case the constructed syndrome does leak - * into the guest somehow. - */ - fsc = 0x3f; - } - - if (access_type == MMU_INST_FETCH) { - syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); - exc = EXCP_PREFETCH_ABORT; - } else { - syn = merge_syn_data_abort(env->exception.syndrome, target_el, - same_el, fi->ea, fi->s1ptw, - access_type == MMU_DATA_STORE, - fsc); - if (access_type == MMU_DATA_STORE - && arm_feature(env, ARM_FEATURE_V6)) { - fsr |= (1 << 11); - } - exc = EXCP_DATA_ABORT; - } - - env->exception.vaddress = addr; - env->exception.fsr = fsr; - raise_exception(env, exc, syn, target_el); -} - -/* Raise a data fault alignment exception for the specified virtual address */ -void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, - MMUAccessType access_type, - int mmu_idx, uintptr_t retaddr) -{ - ARMCPU *cpu = ARM_CPU(cs); - ARMMMUFaultInfo fi = {}; - - /* now we have a real cpu fault */ - cpu_restore_state(cs, retaddr, true); - - fi.type = ARMFault_Alignment; - arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); -} - -/* - * arm_cpu_do_transaction_failed: handle a memory system error response - * (eg "no device/memory present at address") by raising an external abort - * exception - */ -void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, - vaddr addr, unsigned size, - MMUAccessType access_type, - int mmu_idx, MemTxAttrs attrs, - MemTxResult response, uintptr_t retaddr) -{ - ARMCPU *cpu = ARM_CPU(cs); - ARMMMUFaultInfo fi = {}; - - /* now we have a real cpu fault */ - cpu_restore_state(cs, retaddr, true); - - fi.ea = arm_extabort_type(response); - fi.type = ARMFault_SyncExternal; - arm_deliver_fault(cpu, addr, access_type, mmu_idx, &fi); -} - -#endif /* !defined(CONFIG_USER_ONLY) */ - void HELPER(v8m_stackcheck)(CPUARMState *env, uint32_t newvalue) { /* diff --git a/target/arm/tlb_helper.c b/target/arm/tlb_helper.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/target/arm/tlb_helper.c @@ -XXX,XX +XXX,XX @@ +/* + * ARM TLB (Translation lookaside buffer) helpers. + * + * This code is licensed under the GNU GPL v2 or later. + * + * SPDX-License-Identifier: GPL-2.0-or-later + */ +#include "qemu/osdep.h" +#include "cpu.h" +#include "internals.h" +#include "exec/exec-all.h" + +#if !defined(CONFIG_USER_ONLY) + +static inline uint32_t merge_syn_data_abort(uint32_t template_syn, + unsigned int target_el, + bool same_el, bool ea, + bool s1ptw, bool is_write, + int fsc) +{ + uint32_t syn; + + /* + * ISV is only set for data aborts routed to EL2 and + * never for stage-1 page table walks faulting on stage 2. + * + * Furthermore, ISV is only set for certain kinds of load/stores. + * If the template syndrome does not have ISV set, we should leave + * it cleared. + * + * See ARMv8 specs, D7-1974: + * ISS encoding for an exception from a Data Abort, the + * ISV field. + */ + if (!(template_syn & ARM_EL_ISV) || target_el != 2 || s1ptw) { + syn = syn_data_abort_no_iss(same_el, + ea, 0, s1ptw, is_write, fsc); + } else { + /* + * Fields: IL, ISV, SAS, SSE, SRT, SF and AR come from the template + * syndrome created at translation time. + * Now we create the runtime syndrome with the remaining fields. + */ + syn = syn_data_abort_with_iss(same_el, + 0, 0, 0, 0, 0, + ea, 0, s1ptw, is_write, fsc, + false); + /* Merge the runtime syndrome with the template syndrome. */ + syn |= template_syn; + } + return syn; +} + +static void QEMU_NORETURN arm_deliver_fault(ARMCPU *cpu, vaddr addr, + MMUAccessType access_type, + int mmu_idx, ARMMMUFaultInfo *fi) +{ + CPUARMState *env = &cpu->env; + int target_el; + bool same_el; + uint32_t syn, exc, fsr, fsc; + ARMMMUIdx arm_mmu_idx = core_to_arm_mmu_idx(env, mmu_idx); + + target_el = exception_target_el(env); + if (fi->stage2) { + target_el = 2; + env->cp15.hpfar_el2 = extract64(fi->s2addr, 12, 47) << 4; + } + same_el = (arm_current_el(env) == target_el); + + if (target_el == 2 || arm_el_is_aa64(env, target_el) || + arm_s1_regime_using_lpae_format(env, arm_mmu_idx)) { + /* + * LPAE format fault status register : bottom 6 bits are + * status code in the same form as needed for syndrome + */ + fsr = arm_fi_to_lfsc(fi); + fsc = extract32(fsr, 0, 6); + } else { + fsr = arm_fi_to_sfsc(fi); + /* + * Short format FSR : this fault will never actually be reported + * to an EL that uses a syndrome register. Use a (currently) + * reserved FSR code in case the constructed syndrome does leak + * into the guest somehow. + */ + fsc = 0x3f; + } + + if (access_type == MMU_INST_FETCH) { + syn = syn_insn_abort(same_el, fi->ea, fi->s1ptw, fsc); + exc = EXCP_PREFETCH_ABORT; + } else { + syn = merge_syn_data_abort(env->exception.syndrome, target_el, + same_el, fi->ea, fi->s1ptw, + access_type == MMU_DATA_STORE, + fsc); + if (access_type == MMU_DATA_STORE + && arm_feature(env, ARM_FEATURE_V6)) { + fsr |= (1 << 11); + } + exc = EXCP_DATA_ABORT; + } + + env->exception.vaddress = addr; + env->exception.fsr = fsr; + raise_exception(env, exc, syn, target_el); +} + +/* Raise a data fault alignment exception for the specified virtual address */ +void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, + MMUAccessType access_type, + int mmu_idx, uintptr_t retaddr) +{ + ARMCPU *cpu = ARM_CPU(cs); + ARMMMUFaultInfo fi = {}; + + /* now we have a real cpu fault */ + cpu_restore_state(cs, retaddr, true); + + fi.type = ARMFault_Alignment; + arm_deliver_fault(cpu, vaddr, access_type, mmu_idx, &fi); +} + +/* + * arm_cpu_do_transaction_failed: handle a memory system error response + * (eg "no device/memory present at address") by raising an external abort + * exception + */ +void arm_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, + vaddr addr, unsigned size, + MMUAccessType access_type, + int mmu_idx, MemTxAttrs attrs, + MemTxResult response, uintptr_t retaddr) +{ + ARMCPU *cpu = ARM_CPU(cs); + ARMMMUFaultInfo fi = {}; + + /* now we have a real cpu fault */ + cpu_restore_state(cs, retaddr, true); + + fi.ea = arm_extabort_type(response); + fi.type = ARMFault_SyncExternal; + arm_deliver_fault(cpu, addr, access_type, mmu_idx, &fi); +} + +#endif /* !defined(CONFIG_USER_ONLY) */ + +bool arm_cpu_tlb_fill(CPUState *cs, vaddr address, int size, + MMUAccessType access_type, int mmu_idx, + bool probe, uintptr_t retaddr) +{ + ARMCPU *cpu = ARM_CPU(cs); + +#ifdef CONFIG_USER_ONLY + cpu->env.exception.vaddress = address; + if (access_type == MMU_INST_FETCH) { + cs->exception_index = EXCP_PREFETCH_ABORT; + } else { + cs->exception_index = EXCP_DATA_ABORT; + } + cpu_loop_exit_restore(cs, retaddr); +#else + hwaddr phys_addr; + target_ulong page_size; + int prot, ret; + MemTxAttrs attrs = {}; + ARMMMUFaultInfo fi = {}; + + /* + * Walk the page table and (if the mapping exists) add the page + * to the TLB. On success, return true. Otherwise, if probing, + * return false. Otherwise populate fsr with ARM DFSR/IFSR fault + * register format, and signal the fault. + */ + ret = get_phys_addr(&cpu->env, address, access_type, + core_to_arm_mmu_idx(&cpu->env, mmu_idx), + &phys_addr, &attrs, &prot, &page_size, &fi, NULL); + if (likely(!ret)) { + /* + * Map a single [sub]page. Regions smaller than our declared + * target page size are handled specially, so for those we + * pass in the exact addresses. + */ + if (page_size >= TARGET_PAGE_SIZE) { + phys_addr &= TARGET_PAGE_MASK; + address &= TARGET_PAGE_MASK; + } + tlb_set_page_with_attrs(cs, address, phys_addr, attrs, + prot, mmu_idx, page_size); + return true; + } else if (probe) { + return false; + } else { + /* now we have a real cpu fault */ + cpu_restore_state(cs, retaddr, true); + arm_deliver_fault(cpu, address, access_type, mmu_idx, &fi); + } +#endif +} -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> To ease the review of the next commit, move the vfp_exceptbits_to_host() function directly after vfp_exceptbits_from_host(). Amusingly the diff shows we are moving vfp_get_fpscr(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-15-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp_helper.c | 52 ++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_from_host(int host_bits) return target_bits; } -uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) -{ - uint32_t i, fpscr; - - fpscr = env->vfp.xregs[ARM_VFP_FPSCR] - | (env->vfp.vec_len << 16) - | (env->vfp.vec_stride << 20); - - i = get_float_exception_flags(&env->vfp.fp_status); - i |= get_float_exception_flags(&env->vfp.standard_fp_status); - /* FZ16 does not generate an input denormal exception. */ - i |= (get_float_exception_flags(&env->vfp.fp_status_f16) - & ~float_flag_input_denormal); - fpscr |= vfp_exceptbits_from_host(i); - - i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; - fpscr |= i ? FPCR_QC : 0; - - return fpscr; -} - -uint32_t vfp_get_fpscr(CPUARMState *env) -{ - return HELPER(vfp_get_fpscr)(env); -} - /* Convert vfp exception flags to target form. */ static inline int vfp_exceptbits_to_host(int target_bits) { @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits) return host_bits; } +uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) +{ + uint32_t i, fpscr; + + fpscr = env->vfp.xregs[ARM_VFP_FPSCR] + | (env->vfp.vec_len << 16) + | (env->vfp.vec_stride << 20); + + i = get_float_exception_flags(&env->vfp.fp_status); + i |= get_float_exception_flags(&env->vfp.standard_fp_status); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + fpscr |= vfp_exceptbits_from_host(i); + + i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; + fpscr |= i ? FPCR_QC : 0; + + return fpscr; +} + +uint32_t vfp_get_fpscr(CPUARMState *env) +{ + return HELPER(vfp_get_fpscr)(env); +} + void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) { int i; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The vfp_set_fpscr() helper contains code specific to the host floating point implementation (here the SoftFloat library). Extract this code to vfp_set_fpscr_to_host(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-16-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp_helper.c | 127 +++++++++++++++++++++------------------- 1 file changed, 66 insertions(+), 61 deletions(-) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits) return host_bits; } -uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) -{ - uint32_t i, fpscr; - - fpscr = env->vfp.xregs[ARM_VFP_FPSCR] - | (env->vfp.vec_len << 16) - | (env->vfp.vec_stride << 20); - - i = get_float_exception_flags(&env->vfp.fp_status); - i |= get_float_exception_flags(&env->vfp.standard_fp_status); - /* FZ16 does not generate an input denormal exception. */ - i |= (get_float_exception_flags(&env->vfp.fp_status_f16) - & ~float_flag_input_denormal); - fpscr |= vfp_exceptbits_from_host(i); - - i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; - fpscr |= i ? FPCR_QC : 0; - - return fpscr; -} - -uint32_t vfp_get_fpscr(CPUARMState *env) -{ - return HELPER(vfp_get_fpscr)(env); -} - -void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) +static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val) { int i; uint32_t changed = env->vfp.xregs[ARM_VFP_FPSCR]; - /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */ - if (!cpu_isar_feature(aa64_fp16, env_archcpu(env))) { - val &= ~FPCR_FZ16; - } - - if (arm_feature(env, ARM_FEATURE_M)) { - /* - * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits - * and also for the trapped-exception-handling bits IxE. - */ - val &= 0xf7c0009f; - } - - /* - * We don't implement trapped exception handling, so the - * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) - * - * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC - * (which are stored in fp_status), and the other RES0 bits - * in between, then we clear all of the low 16 bits. - */ - env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000; - env->vfp.vec_len = (val >> 16) & 7; - env->vfp.vec_stride = (val >> 20) & 3; - - /* - * The bit we set within fpscr_q is arbitrary; the register as a - * whole being zero/non-zero is what counts. - */ - env->vfp.qc[0] = val & FPCR_QC; - env->vfp.qc[1] = 0; - env->vfp.qc[2] = 0; - env->vfp.qc[3] = 0; - changed ^= val; if (changed & (3 << 22)) { i = (val >> 22) & 3; @@ -XXX,XX +XXX,XX @@ void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) set_float_exception_flags(0, &env->vfp.standard_fp_status); } +uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) +{ + uint32_t i, fpscr; + + fpscr = env->vfp.xregs[ARM_VFP_FPSCR] + | (env->vfp.vec_len << 16) + | (env->vfp.vec_stride << 20); + + i = get_float_exception_flags(&env->vfp.fp_status); + i |= get_float_exception_flags(&env->vfp.standard_fp_status); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + fpscr |= vfp_exceptbits_from_host(i); + + i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; + fpscr |= i ? FPCR_QC : 0; + + return fpscr; +} + +uint32_t vfp_get_fpscr(CPUARMState *env) +{ + return HELPER(vfp_get_fpscr)(env); +} + +void HELPER(vfp_set_fpscr)(CPUARMState *env, uint32_t val) +{ + /* When ARMv8.2-FP16 is not supported, FZ16 is RES0. */ + if (!cpu_isar_feature(aa64_fp16, env_archcpu(env))) { + val &= ~FPCR_FZ16; + } + + if (arm_feature(env, ARM_FEATURE_M)) { + /* + * M profile FPSCR is RES0 for the QC, STRIDE, FZ16, LEN bits + * and also for the trapped-exception-handling bits IxE. + */ + val &= 0xf7c0009f; + } + + /* + * We don't implement trapped exception handling, so the + * trap enable bits, IDE|IXE|UFE|OFE|DZE|IOE are all RAZ/WI (not RES0!) + * + * If we exclude the exception flags, IOC|DZC|OFC|UFC|IXC|IDC + * (which are stored in fp_status), and the other RES0 bits + * in between, then we clear all of the low 16 bits. + */ + env->vfp.xregs[ARM_VFP_FPSCR] = val & 0xf7c80000; + env->vfp.vec_len = (val >> 16) & 7; + env->vfp.vec_stride = (val >> 20) & 3; + + /* + * The bit we set within fpscr_q is arbitrary; the register as a + * whole being zero/non-zero is what counts. + */ + env->vfp.qc[0] = val & FPCR_QC; + env->vfp.qc[1] = 0; + env->vfp.qc[2] = 0; + env->vfp.qc[3] = 0; + + vfp_set_fpscr_to_host(env, val); +} + void vfp_set_fpscr(CPUARMState *env, uint32_t val) { HELPER(vfp_set_fpscr)(env, val); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> The vfp_set_fpscr() helper contains code specific to the host floating point implementation (here the SoftFloat library). Extract this code to vfp_set_fpscr_from_host(). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-17-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp_helper.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ static inline int vfp_exceptbits_to_host(int target_bits) return host_bits; } +static uint32_t vfp_get_fpscr_from_host(CPUARMState *env) +{ + uint32_t i; + + i = get_float_exception_flags(&env->vfp.fp_status); + i |= get_float_exception_flags(&env->vfp.standard_fp_status); + /* FZ16 does not generate an input denormal exception. */ + i |= (get_float_exception_flags(&env->vfp.fp_status_f16) + & ~float_flag_input_denormal); + return vfp_exceptbits_from_host(i); +} + static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val) { int i; @@ -XXX,XX +XXX,XX @@ uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) | (env->vfp.vec_len << 16) | (env->vfp.vec_stride << 20); - i = get_float_exception_flags(&env->vfp.fp_status); - i |= get_float_exception_flags(&env->vfp.standard_fp_status); - /* FZ16 does not generate an input denormal exception. */ - i |= (get_float_exception_flags(&env->vfp.fp_status_f16) - & ~float_flag_input_denormal); - fpscr |= vfp_exceptbits_from_host(i); + fpscr |= vfp_get_fpscr_from_host(env); i = env->vfp.qc[0] | env->vfp.qc[1] | env->vfp.qc[2] | env->vfp.qc[3]; fpscr |= i ? FPCR_QC : 0; -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> This code is specific to the SoftFloat floating-point implementation, which is only used by TCG. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-18-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/vfp_helper.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/target/arm/vfp_helper.c b/target/arm/vfp_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/vfp_helper.c +++ b/target/arm/vfp_helper.c @@ -XXX,XX +XXX,XX @@ */ #include "qemu/osdep.h" -#include "qemu/log.h" #include "cpu.h" #include "exec/helper-proto.h" -#include "fpu/softfloat.h" #include "internals.h" - +#ifdef CONFIG_TCG +#include "qemu/log.h" +#include "fpu/softfloat.h" +#endif /* VFP support. We follow the convention used for VFP instructions: Single precision routines have a "s" suffix, double precision a "d" suffix. */ +#ifdef CONFIG_TCG + /* Convert host exception flags to vfp form. */ static inline int vfp_exceptbits_from_host(int host_bits) { @@ -XXX,XX +XXX,XX @@ static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val) set_float_exception_flags(0, &env->vfp.standard_fp_status); } +#else + +static uint32_t vfp_get_fpscr_from_host(CPUARMState *env) +{ + return 0; +} + +static void vfp_set_fpscr_to_host(CPUARMState *env, uint32_t val) +{ +} + +#endif + uint32_t HELPER(vfp_get_fpscr)(CPUARMState *env) { uint32_t i, fpscr; @@ -XXX,XX +XXX,XX @@ void vfp_set_fpscr(CPUARMState *env, uint32_t val) HELPER(vfp_set_fpscr)(env, val); } +#ifdef CONFIG_TCG + #define VFP_HELPER(name, p) HELPER(glue(glue(vfp_,name),p)) #define VFP_BINOP(name) \ @@ -XXX,XX +XXX,XX @@ float64 HELPER(frint64_d)(float64 f, void *fpst) { return frint_d(f, fpst, 64); } + +#endif -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> Under KVM, the kernel gets the HVC call and handle the PSCI requests. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-20-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ vaddr arm_adjust_watchpoint_address(CPUState *cs, vaddr addr, int len); /* Callback function for when a watchpoint or breakpoint triggers. */ void arm_debug_excp_handler(CPUState *cs); -#ifdef CONFIG_USER_ONLY +#if defined(CONFIG_USER_ONLY) || !defined(CONFIG_TCG) static inline bool arm_is_psci_call(ARMCPU *cpu, int excp_type) { return false; } +static inline void arm_handle_psci_call(ARMCPU *cpu) +{ + g_assert_not_reached(); +} #else /* Return true if the r0/x0 value indicates that this SMC/HVC is a PSCI call. */ bool arm_is_psci_call(ARMCPU *cpu, int excp_type); -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> In few commits we will split the M-profile functions from this file, and this function will also be called in the new file. Declare it in the "internals.h" header. Since it is in the middle of a block of M profile functions, move it previous to this block to ease the later refactor. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-21-philmd@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 2 ++ target/arm/helper.c | 76 +++++++++++++++++++++--------------------- 2 files changed, 40 insertions(+), 38 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ bool get_phys_addr(CPUARMState *env, target_ulong address, target_ulong *page_size, ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs); +void arm_log_exception(int idx); + #endif /* !CONFIG_USER_ONLY */ #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, return target_el; } +void arm_log_exception(int idx) +{ + if (qemu_loglevel_mask(CPU_LOG_INT)) { + const char *exc = NULL; + static const char * const excnames[] = { + [EXCP_UDEF] = "Undefined Instruction", + [EXCP_SWI] = "SVC", + [EXCP_PREFETCH_ABORT] = "Prefetch Abort", + [EXCP_DATA_ABORT] = "Data Abort", + [EXCP_IRQ] = "IRQ", + [EXCP_FIQ] = "FIQ", + [EXCP_BKPT] = "Breakpoint", + [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", + [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", + [EXCP_HVC] = "Hypervisor Call", + [EXCP_HYP_TRAP] = "Hypervisor Trap", + [EXCP_SMC] = "Secure Monitor Call", + [EXCP_VIRQ] = "Virtual IRQ", + [EXCP_VFIQ] = "Virtual FIQ", + [EXCP_SEMIHOST] = "Semihosting call", + [EXCP_NOCP] = "v7M NOCP UsageFault", + [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", + [EXCP_STKOF] = "v8M STKOF UsageFault", + [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", + [EXCP_LSERR] = "v8M LSERR UsageFault", + [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", + }; + + if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { + exc = excnames[idx]; + } + if (!exc) { + exc = "unknown"; + } + qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc); + } +} + /* * Return true if the v7M CPACR permits access to the FPU for the specified * security state and privilege level. @@ -XXX,XX +XXX,XX @@ static bool do_v7m_function_return(ARMCPU *cpu) return true; } -static void arm_log_exception(int idx) -{ - if (qemu_loglevel_mask(CPU_LOG_INT)) { - const char *exc = NULL; - static const char * const excnames[] = { - [EXCP_UDEF] = "Undefined Instruction", - [EXCP_SWI] = "SVC", - [EXCP_PREFETCH_ABORT] = "Prefetch Abort", - [EXCP_DATA_ABORT] = "Data Abort", - [EXCP_IRQ] = "IRQ", - [EXCP_FIQ] = "FIQ", - [EXCP_BKPT] = "Breakpoint", - [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", - [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", - [EXCP_HVC] = "Hypervisor Call", - [EXCP_HYP_TRAP] = "Hypervisor Trap", - [EXCP_SMC] = "Secure Monitor Call", - [EXCP_VIRQ] = "Virtual IRQ", - [EXCP_VFIQ] = "Virtual FIQ", - [EXCP_SEMIHOST] = "Semihosting call", - [EXCP_NOCP] = "v7M NOCP UsageFault", - [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", - [EXCP_STKOF] = "v8M STKOF UsageFault", - [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", - [EXCP_LSERR] = "v8M LSERR UsageFault", - [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", - }; - - if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { - exc = excnames[idx]; - } - if (!exc) { - exc = "unknown"; - } - qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc); - } -} - static bool v7m_read_half_insn(ARMCPU *cpu, ARMMMUIdx mmu_idx, uint32_t addr, uint16_t *insn) { -- 2.20.1 From: Philippe Mathieu-Daudé <philmd@redhat.com> In the next commit we will split the M-profile functions from this file. Some function will be called out of helper.c. Declare them in the "internals.h" header. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190701132516.26392-22-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/internals.h | 42 ++++++++++++++++++++++++++++++++++++++++++ target/arm/helper.c | 38 ++------------------------------------ 2 files changed, 44 insertions(+), 36 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ static inline uint32_t v7m_sp_limit(CPUARMState *env) } } +/** + * v7m_cpacr_pass: + * Return true if the v7M CPACR permits access to the FPU for the specified + * security state and privilege level. + */ +static inline bool v7m_cpacr_pass(CPUARMState *env, + bool is_secure, bool is_priv) +{ + switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { + case 0: + case 2: /* UNPREDICTABLE: we treat like 0 */ + return false; + case 1: + return is_priv; + case 3: + return true; + default: + g_assert_not_reached(); + } +} + /** * aarch32_mode_name(): Return name of the AArch32 CPU mode * @psr: Program Status Register indicating CPU mode @@ -XXX,XX +XXX,XX @@ static inline int exception_target_el(CPUARMState *env) #ifndef CONFIG_USER_ONLY +/* Security attributes for an address, as returned by v8m_security_lookup. */ +typedef struct V8M_SAttributes { + bool subpage; /* true if these attrs don't cover the whole TARGET_PAGE */ + bool ns; + bool nsc; + uint8_t sregion; + bool srvalid; + uint8_t iregion; + bool irvalid; +} V8M_SAttributes; + +void v8m_security_lookup(CPUARMState *env, uint32_t address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + V8M_SAttributes *sattrs); + +bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, + MMUAccessType access_type, ARMMMUIdx mmu_idx, + hwaddr *phys_ptr, MemTxAttrs *txattrs, + int *prot, bool *is_subpage, + ARMMMUFaultInfo *fi, uint32_t *mregion); + /* Cacheability and shareability attributes for a memory access */ typedef struct ARMCacheAttrs { unsigned int attrs:8; /* as in the MAIR register encoding */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static bool get_phys_addr_lpae(CPUARMState *env, target_ulong address, hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot, target_ulong *page_size_ptr, ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs); - -/* Security attributes for an address, as returned by v8m_security_lookup. */ -typedef struct V8M_SAttributes { - bool subpage; /* true if these attrs don't cover the whole TARGET_PAGE */ - bool ns; - bool nsc; - uint8_t sregion; - bool srvalid; - uint8_t iregion; - bool irvalid; -} V8M_SAttributes; - -static void v8m_security_lookup(CPUARMState *env, uint32_t address, - MMUAccessType access_type, ARMMMUIdx mmu_idx, - V8M_SAttributes *sattrs); #endif static void switch_mode(CPUARMState *env, int mode); @@ -XXX,XX +XXX,XX @@ void arm_log_exception(int idx) } } -/* - * Return true if the v7M CPACR permits access to the FPU for the specified - * security state and privilege level. - */ -static bool v7m_cpacr_pass(CPUARMState *env, bool is_secure, bool is_priv) -{ - switch (extract32(env->v7m.cpacr[is_secure], 20, 2)) { - case 0: - case 2: /* UNPREDICTABLE: we treat like 0 */ - return false; - case 1: - return is_priv; - case 3: - return true; - default: - g_assert_not_reached(); - } -} - /* * What kind of stack write are we doing? This affects how exceptions * generated during the stacking are treated. @@ -XXX,XX +XXX,XX @@ static bool v8m_is_sau_exempt(CPUARMState *env, (address >= 0xe00ff000 && address <= 0xe00fffff); } -static void v8m_security_lookup(CPUARMState *env, uint32_t address, +void v8m_security_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, V8M_SAttributes *sattrs) { @@ -XXX,XX +XXX,XX @@ static void v8m_security_lookup(CPUARMState *env, uint32_t address, } } -static bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, +bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, MMUAccessType access_type, ARMMMUIdx mmu_idx, hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot, bool *is_subpage, -- 2.20.1 First arm pullreq for 7.1. The bulk of this is the qemu_split_irq removal. I have enough stuff in my to-review queue that I expect to do another pullreq early next week, but 31 patches is enough to not hang on to. thanks -- PMM The following changes since commit 9c125d17e9402c232c46610802e5931b3639d77b: Merge tag 'pull-tcg-20220420' of https://gitlab.com/rth7680/qemu into staging (2022-04-20 16:43:11 -0700) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20220421 for you to fetch changes up to 5b415dd61bdbf61fb4be0e9f1a7172b8bce682c6: hw/arm: Use bit fields for NPCM7XX PWRON STRAPs (2022-04-21 11:37:05 +0100) ---------------------------------------------------------------- target-arm queue: * hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF * versal: Add the Cortex-R5s in the Real-Time Processing Unit (RPU) subsystem * versal: model enough of the Clock/Reset Low-power domain (CRL) to allow control of the Cortex-R5s * xlnx-zynqmp: Connect 4 TTC timers * exynos4210: Refactor GIC/combiner code to stop using qemu_split_irq * realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' * stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' * hw/core/irq: remove unused 'qemu_irq_split' function * npcm7xx: use symbolic constants for PWRON STRAP bit fields * virt: document impact of gic-version on max CPUs ---------------------------------------------------------------- Edgar E. Iglesias (6): timer: cadence_ttc: Break out header file to allow embedding hw/arm/xlnx-zynqmp: Connect 4 TTC timers hw/arm: versal: Create an APU CPU Cluster hw/arm: versal: Add the Cortex-R5Fs hw/misc: Add a model of the Xilinx Versal CRL hw/arm: versal: Connect the CRL Hao Wu (2): hw/misc: Add PWRON STRAP bit fields in GCR module hw/arm: Use bit fields for NPCM7XX PWRON STRAPs Heinrich Schuchardt (1): hw/arm/virt: impact of gic-version on max CPUs Peter Maydell (19): hw/arm/virt: Check for attempt to use TrustZone with KVM or HVF hw/arm/exynos4210: Use TYPE_OR_IRQ instead of custom OR-gate device hw/intc/exynos4210_gic: Remove unused TYPE_EXYNOS4210_IRQ_GATE hw/arm/exynos4210: Put a9mpcore device into state struct hw/arm/exynos4210: Drop int_gic_irq[] from Exynos4210Irq struct hw/arm/exynos4210: Coalesce board_irqs and irq_table hw/arm/exynos4210: Fix code style nit in combiner_grp_to_gic_id[] hw/arm/exynos4210: Move exynos4210_init_board_irqs() into exynos4210.c hw/arm/exynos4210: Put external GIC into state struct hw/arm/exynos4210: Drop ext_gic_irq[] from Exynos4210Irq struct hw/arm/exynos4210: Move exynos4210_combiner_get_gpioin() into exynos4210.c hw/arm/exynos4210: Delete unused macro definitions hw/arm/exynos4210: Use TYPE_SPLIT_IRQ in exynos4210_init_board_irqs() hw/arm/exynos4210: Fill in irq_table[] for internal-combiner-only IRQ lines hw/arm/exynos4210: Connect MCT_G0 and MCT_G1 to both combiners hw/arm/exynos4210: Don't connect multiple lines to external GIC inputs hw/arm/exynos4210: Fold combiner splits into exynos4210_init_board_irqs() hw/arm/exynos4210: Put combiners into state struct hw/arm/exynos4210: Drop Exynos4210Irq struct Zongyuan Li (3): hw/arm/realview: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' hw/arm/stellaris: replace 'qemu_split_irq' with 'TYPE_SPLIT_IRQ' hw/core/irq: remove unused 'qemu_irq_split' function docs/system/arm/virt.rst | 4 +- include/hw/arm/exynos4210.h | 50 ++-- include/hw/arm/xlnx-versal.h | 16 ++ include/hw/arm/xlnx-zynqmp.h | 4 + include/hw/intc/exynos4210_combiner.h | 57 +++++ include/hw/intc/exynos4210_gic.h | 43 ++++ include/hw/irq.h | 5 - include/hw/misc/npcm7xx_gcr.h | 30 +++ include/hw/misc/xlnx-versal-crl.h | 235 +++++++++++++++++++ include/hw/timer/cadence_ttc.h | 54 +++++ hw/arm/exynos4210.c | 430 ++++++++++++++++++++++++++++++---- hw/arm/npcm7xx_boards.c | 24 +- hw/arm/realview.c | 33 ++- hw/arm/stellaris.c | 15 +- hw/arm/virt.c | 7 + hw/arm/xlnx-versal-virt.c | 6 +- hw/arm/xlnx-versal.c | 99 +++++++- hw/arm/xlnx-zynqmp.c | 22 ++ hw/core/irq.c | 15 -- hw/intc/exynos4210_combiner.c | 108 +-------- hw/intc/exynos4210_gic.c | 344 +-------------------------- hw/misc/xlnx-versal-crl.c | 421 +++++++++++++++++++++++++++++++++ hw/timer/cadence_ttc.c | 32 +-- MAINTAINERS | 2 +- hw/misc/meson.build | 1 + 25 files changed, 1457 insertions(+), 600 deletions(-) create mode 100644 include/hw/intc/exynos4210_combiner.h create mode 100644 include/hw/intc/exynos4210_gic.h create mode 100644 include/hw/misc/xlnx-versal-crl.h create mode 100644 include/hw/timer/cadence_ttc.h create mode 100644 hw/misc/xlnx-versal-crl.c It's not possible to provide the guest with the Security extensions (TrustZone) when using KVM or HVF, because the hardware virtualization extensions don't permit running EL3 guest code. However, we weren't checking for this combination, with the result that QEMU would assert if you tried it: $ qemu-system-aarch64 -enable-kvm -machine virt,secure=on -cpu host -display none Unexpected error in object_property_find_err() at ../../qom/object.c:1304: qemu-system-aarch64: Property 'host-arm-cpu.secure-memory' not found Aborted Check for this combination of options and report an error, in the same way we already do for attempts to give a KVM or HVF guest the Virtualization or MTE extensions. Now we will report: qemu-system-aarch64: mach-virt: KVM does not support providing Security extensions (TrustZone) to the guest CPU Resolves: https://gitlab.com/qemu-project/qemu/-/issues/961 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404155301.566542-1-peter.maydell@linaro.org --- hw/arm/virt.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void machvirt_init(MachineState *machine) exit(1); } + if (vms->secure && (kvm_enabled() || hvf_enabled())) { + error_report("mach-virt: %s does not support providing " + "Security extensions (TrustZone) to the guest CPU", + kvm_enabled() ? "KVM" : "HVF"); + exit(1); + } + if (vms->virt && (kvm_enabled() || hvf_enabled())) { error_report("mach-virt: %s does not support providing " "Virtualization extensions to the guest CPU", -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Break out header file to allow embedding of the the TTC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220331222017.2914409-2-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/timer/cadence_ttc.h | 54 ++++++++++++++++++++++++++++++++++ hw/timer/cadence_ttc.c | 32 ++------------------ 2 files changed, 56 insertions(+), 30 deletions(-) create mode 100644 include/hw/timer/cadence_ttc.h diff --git a/include/hw/timer/cadence_ttc.h b/include/hw/timer/cadence_ttc.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/timer/cadence_ttc.h @@ -XXX,XX +XXX,XX @@ +/* + * Xilinx Zynq cadence TTC model + * + * Copyright (c) 2011 Xilinx Inc. + * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) + * Copyright (c) 2012 PetaLogix Pty Ltd. + * Written By Haibing Ma + * M. Habib + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HW_TIMER_CADENCE_TTC_H +#define HW_TIMER_CADENCE_TTC_H + +#include "hw/sysbus.h" +#include "qemu/timer.h" + +typedef struct { + QEMUTimer *timer; + int freq; + + uint32_t reg_clock; + uint32_t reg_count; + uint32_t reg_value; + uint16_t reg_interval; + uint16_t reg_match[3]; + uint32_t reg_intr; + uint32_t reg_intr_en; + uint32_t reg_event_ctrl; + uint32_t reg_event; + + uint64_t cpu_time; + unsigned int cpu_time_valid; + + qemu_irq irq; +} CadenceTimerState; + +#define TYPE_CADENCE_TTC "cadence_ttc" +OBJECT_DECLARE_SIMPLE_TYPE(CadenceTTCState, CADENCE_TTC) + +struct CadenceTTCState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + CadenceTimerState timer[3]; +}; + +#endif diff --git a/hw/timer/cadence_ttc.c b/hw/timer/cadence_ttc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/timer/cadence_ttc.c +++ b/hw/timer/cadence_ttc.c @@ -XXX,XX +XXX,XX @@ #include "qemu/timer.h" #include "qom/object.h" +#include "hw/timer/cadence_ttc.h" + #ifdef CADENCE_TTC_ERR_DEBUG #define DB_PRINT(...) do { \ fprintf(stderr, ": %s: ", __func__); \ @@ -XXX,XX +XXX,XX @@ #define CLOCK_CTRL_PS_EN 0x00000001 #define CLOCK_CTRL_PS_V 0x0000001e -typedef struct { - QEMUTimer *timer; - int freq; - - uint32_t reg_clock; - uint32_t reg_count; - uint32_t reg_value; - uint16_t reg_interval; - uint16_t reg_match[3]; - uint32_t reg_intr; - uint32_t reg_intr_en; - uint32_t reg_event_ctrl; - uint32_t reg_event; - - uint64_t cpu_time; - unsigned int cpu_time_valid; - - qemu_irq irq; -} CadenceTimerState; - -#define TYPE_CADENCE_TTC "cadence_ttc" -OBJECT_DECLARE_SIMPLE_TYPE(CadenceTTCState, CADENCE_TTC) - -struct CadenceTTCState { - SysBusDevice parent_obj; - - MemoryRegion iomem; - CadenceTimerState timer[3]; -}; - static void cadence_timer_update(CadenceTimerState *s) { qemu_set_irq(s->irq, !!(s->reg_intr & s->reg_intr_en)); -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Connect the 4 TTC timers on the ZynqMP. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Luc Michel <luc@lmichel.fr> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220331222017.2914409-3-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 4 ++++ hw/arm/xlnx-zynqmp.c | 22 ++++++++++++++++++++++ 2 files changed, 26 insertions(+) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/misc/xlnx-zynqmp-apu-ctrl.h" #include "hw/misc/xlnx-zynqmp-crf.h" +#include "hw/timer/cadence_ttc.h" #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp" OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) #define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \ XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE) +#define XLNX_ZYNQMP_NUM_TTC 4 + /* * Unimplemented mmio regions needed to boot some images. */ @@ -XXX,XX +XXX,XX @@ struct XlnxZynqMPState { qemu_or_irq qspi_irq_orgate; XlnxZynqMPAPUCtrl apu_ctrl; XlnxZynqMPCRF crf; + CadenceTTCState ttc[XLNX_ZYNQMP_NUM_TTC]; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ #define APU_ADDR 0xfd5c0000 #define APU_IRQ 153 +#define TTC0_ADDR 0xFF110000 +#define TTC0_IRQ 36 + #define IPI_ADDR 0xFF300000 #define IPI_IRQ 64 @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_create_crf(XlnxZynqMPState *s, qemu_irq *gic) sysbus_connect_irq(sbd, 0, gic[CRF_IRQ]); } +static void xlnx_zynqmp_create_ttc(XlnxZynqMPState *s, qemu_irq *gic) +{ + SysBusDevice *sbd; + int i, irq; + + for (i = 0; i < XLNX_ZYNQMP_NUM_TTC; i++) { + object_initialize_child(OBJECT(s), "ttc[*]", &s->ttc[i], + TYPE_CADENCE_TTC); + sbd = SYS_BUS_DEVICE(&s->ttc[i]); + + sysbus_realize(sbd, &error_fatal); + sysbus_mmio_map(sbd, 0, TTC0_ADDR + i * 0x10000); + for (irq = 0; irq < 3; irq++) { + sysbus_connect_irq(sbd, irq, gic[TTC0_IRQ + i * 3 + irq]); + } + } +} + static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s) { static const struct UnimpInfo { @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) xlnx_zynqmp_create_efuse(s, gic_spi); xlnx_zynqmp_create_apu_ctrl(s, gic_spi); xlnx_zynqmp_create_crf(s, gic_spi); + xlnx_zynqmp_create_ttc(s, gic_spi); xlnx_zynqmp_create_unimp_mmio(s); for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) { -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Create an APU CPU Cluster. This is in preparation to add the RPU. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-2-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 2 ++ hw/arm/xlnx-versal.c | 9 ++++++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/boot.h" +#include "hw/cpu/cluster.h" #include "hw/or-irq.h" #include "hw/sd/sdhci.h" #include "hw/intc/arm_gicv3.h" @@ -XXX,XX +XXX,XX @@ struct Versal { struct { struct { MemoryRegion mr; + CPUClusterState cluster; ARMCPU cpu[XLNX_VERSAL_NR_ACPUS]; GICv3State gic; } apu; diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_cpus(Versal *s) { int i; + object_initialize_child(OBJECT(s), "apu-cluster", &s->fpd.apu.cluster, + TYPE_CPU_CLUSTER); + qdev_prop_set_uint32(DEVICE(&s->fpd.apu.cluster), "cluster-id", 0); + for (i = 0; i < ARRAY_SIZE(s->fpd.apu.cpu); i++) { Object *obj; - object_initialize_child(OBJECT(s), "apu-cpu[*]", &s->fpd.apu.cpu[i], + object_initialize_child(OBJECT(&s->fpd.apu.cluster), + "apu-cpu[*]", &s->fpd.apu.cpu[i], XLNX_VERSAL_ACPU_TYPE); obj = OBJECT(&s->fpd.apu.cpu[i]); if (i) { @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_cpus(Versal *s) &error_abort); qdev_realize(DEVICE(obj), NULL, &error_fatal); } + + qdev_realize(DEVICE(&s->fpd.apu.cluster), NULL, &error_fatal); } static void versal_create_apu_gic(Versal *s, qemu_irq *pic) -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Add the Cortex-R5Fs of the Versal RPU (Real-time Processing Unit) subsystem. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-3-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 10 ++++++++++ hw/arm/xlnx-versal-virt.c | 6 +++--- hw/arm/xlnx-versal.c | 36 ++++++++++++++++++++++++++++++++++++ 3 files changed, 49 insertions(+), 3 deletions(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL) #define XLNX_VERSAL_NR_ACPUS 2 +#define XLNX_VERSAL_NR_RCPUS 2 #define XLNX_VERSAL_NR_UARTS 2 #define XLNX_VERSAL_NR_GEMS 2 #define XLNX_VERSAL_NR_ADMAS 8 @@ -XXX,XX +XXX,XX @@ struct Versal { VersalUsb2 usb; } iou; + /* Real-time Processing Unit. */ + struct { + MemoryRegion mr; + MemoryRegion mr_ps_alias; + + CPUClusterState cluster; + ARMCPU cpu[XLNX_VERSAL_NR_RCPUS]; + } rpu; + struct { qemu_or_irq irq_orgate; XlnxXramCtrl ctrl[XLNX_VERSAL_NR_XRAM]; diff --git a/hw/arm/xlnx-versal-virt.c b/hw/arm/xlnx-versal-virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal-virt.c +++ b/hw/arm/xlnx-versal-virt.c @@ -XXX,XX +XXX,XX @@ static void versal_virt_machine_class_init(ObjectClass *oc, void *data) mc->desc = "Xilinx Versal Virtual development board"; mc->init = versal_virt_init; - mc->min_cpus = XLNX_VERSAL_NR_ACPUS; - mc->max_cpus = XLNX_VERSAL_NR_ACPUS; - mc->default_cpus = XLNX_VERSAL_NR_ACPUS; + mc->min_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; + mc->max_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; + mc->default_cpus = XLNX_VERSAL_NR_ACPUS + XLNX_VERSAL_NR_RCPUS; mc->no_cdrom = true; mc->default_ram_id = "ddr"; } diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #define XLNX_VERSAL_ACPU_TYPE ARM_CPU_TYPE_NAME("cortex-a72") +#define XLNX_VERSAL_RCPU_TYPE ARM_CPU_TYPE_NAME("cortex-r5f") #define GEM_REVISION 0x40070106 #define VERSAL_NUM_PMC_APB_IRQS 3 @@ -XXX,XX +XXX,XX @@ static void versal_create_apu_gic(Versal *s, qemu_irq *pic) } } +static void versal_create_rpu_cpus(Versal *s) +{ + int i; + + object_initialize_child(OBJECT(s), "rpu-cluster", &s->lpd.rpu.cluster, + TYPE_CPU_CLUSTER); + qdev_prop_set_uint32(DEVICE(&s->lpd.rpu.cluster), "cluster-id", 1); + + for (i = 0; i < ARRAY_SIZE(s->lpd.rpu.cpu); i++) { + Object *obj; + + object_initialize_child(OBJECT(&s->lpd.rpu.cluster), + "rpu-cpu[*]", &s->lpd.rpu.cpu[i], + XLNX_VERSAL_RCPU_TYPE); + obj = OBJECT(&s->lpd.rpu.cpu[i]); + object_property_set_bool(obj, "start-powered-off", true, + &error_abort); + + object_property_set_int(obj, "mp-affinity", 0x100 | i, &error_abort); + object_property_set_int(obj, "core-count", ARRAY_SIZE(s->lpd.rpu.cpu), + &error_abort); + object_property_set_link(obj, "memory", OBJECT(&s->lpd.rpu.mr), + &error_abort); + qdev_realize(DEVICE(obj), NULL, &error_fatal); + } + + qdev_realize(DEVICE(&s->lpd.rpu.cluster), NULL, &error_fatal); +} + static void versal_create_uarts(Versal *s, qemu_irq *pic) { int i; @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_apu_cpus(s); versal_create_apu_gic(s, pic); + versal_create_rpu_cpus(s); versal_create_uarts(s, pic); versal_create_usbs(s, pic); versal_create_gems(s, pic); @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) memory_region_add_subregion_overlap(&s->mr_ps, MM_OCM, &s->lpd.mr_ocm, 0); memory_region_add_subregion_overlap(&s->fpd.apu.mr, 0, &s->mr_ps, 0); + memory_region_add_subregion_overlap(&s->lpd.rpu.mr, 0, + &s->lpd.rpu.mr_ps_alias, 0); } static void versal_init(Object *obj) @@ -XXX,XX +XXX,XX @@ static void versal_init(Object *obj) Versal *s = XLNX_VERSAL(obj); memory_region_init(&s->fpd.apu.mr, obj, "mr-apu", UINT64_MAX); + memory_region_init(&s->lpd.rpu.mr, obj, "mr-rpu", UINT64_MAX); memory_region_init(&s->mr_ps, obj, "mr-ps-switch", UINT64_MAX); + memory_region_init_alias(&s->lpd.rpu.mr_ps_alias, OBJECT(s), + "mr-rpu-ps-alias", &s->mr_ps, 0, UINT64_MAX); } static Property versal_properties[] = { -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Add a model of the Xilinx Versal CRL. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-4-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/xlnx-versal-crl.h | 235 +++++++++++++++++ hw/misc/xlnx-versal-crl.c | 421 ++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + 3 files changed, 657 insertions(+) create mode 100644 include/hw/misc/xlnx-versal-crl.h create mode 100644 hw/misc/xlnx-versal-crl.c diff --git a/include/hw/misc/xlnx-versal-crl.h b/include/hw/misc/xlnx-versal-crl.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/xlnx-versal-crl.h @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Clock-Reset-LPD (CRL). + * + * Copyright (c) 2022 Xilinx Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Edgar E. Iglesias <edgar.iglesias@xilinx.com> + */ +#ifndef HW_MISC_XLNX_VERSAL_CRL_H +#define HW_MISC_XLNX_VERSAL_CRL_H + +#include "hw/sysbus.h" +#include "hw/register.h" +#include "target/arm/cpu.h" + +#define TYPE_XLNX_VERSAL_CRL "xlnx,versal-crl" +OBJECT_DECLARE_SIMPLE_TYPE(XlnxVersalCRL, XLNX_VERSAL_CRL) + +REG32(ERR_CTRL, 0x0) + FIELD(ERR_CTRL, SLVERR_ENABLE, 0, 1) +REG32(IR_STATUS, 0x4) + FIELD(IR_STATUS, ADDR_DECODE_ERR, 0, 1) +REG32(IR_MASK, 0x8) + FIELD(IR_MASK, ADDR_DECODE_ERR, 0, 1) +REG32(IR_ENABLE, 0xc) + FIELD(IR_ENABLE, ADDR_DECODE_ERR, 0, 1) +REG32(IR_DISABLE, 0x10) + FIELD(IR_DISABLE, ADDR_DECODE_ERR, 0, 1) +REG32(WPROT, 0x1c) + FIELD(WPROT, ACTIVE, 0, 1) +REG32(PLL_CLK_OTHER_DMN, 0x20) + FIELD(PLL_CLK_OTHER_DMN, APLL_BYPASS, 0, 1) +REG32(RPLL_CTRL, 0x40) + FIELD(RPLL_CTRL, POST_SRC, 24, 3) + FIELD(RPLL_CTRL, PRE_SRC, 20, 3) + FIELD(RPLL_CTRL, CLKOUTDIV, 16, 2) + FIELD(RPLL_CTRL, FBDIV, 8, 8) + FIELD(RPLL_CTRL, BYPASS, 3, 1) + FIELD(RPLL_CTRL, RESET, 0, 1) +REG32(RPLL_CFG, 0x44) + FIELD(RPLL_CFG, LOCK_DLY, 25, 7) + FIELD(RPLL_CFG, LOCK_CNT, 13, 10) + FIELD(RPLL_CFG, LFHF, 10, 2) + FIELD(RPLL_CFG, CP, 5, 4) + FIELD(RPLL_CFG, RES, 0, 4) +REG32(RPLL_FRAC_CFG, 0x48) + FIELD(RPLL_FRAC_CFG, ENABLED, 31, 1) + FIELD(RPLL_FRAC_CFG, SEED, 22, 3) + FIELD(RPLL_FRAC_CFG, ALGRTHM, 19, 1) + FIELD(RPLL_FRAC_CFG, ORDER, 18, 1) + FIELD(RPLL_FRAC_CFG, DATA, 0, 16) +REG32(PLL_STATUS, 0x50) + FIELD(PLL_STATUS, RPLL_STABLE, 2, 1) + FIELD(PLL_STATUS, RPLL_LOCK, 0, 1) +REG32(RPLL_TO_XPD_CTRL, 0x100) + FIELD(RPLL_TO_XPD_CTRL, CLKACT, 25, 1) + FIELD(RPLL_TO_XPD_CTRL, DIVISOR0, 8, 10) +REG32(LPD_TOP_SWITCH_CTRL, 0x104) + FIELD(LPD_TOP_SWITCH_CTRL, CLKACT_ADMA, 26, 1) + FIELD(LPD_TOP_SWITCH_CTRL, CLKACT, 25, 1) + FIELD(LPD_TOP_SWITCH_CTRL, DIVISOR0, 8, 10) + FIELD(LPD_TOP_SWITCH_CTRL, SRCSEL, 0, 3) +REG32(LPD_LSBUS_CTRL, 0x108) + FIELD(LPD_LSBUS_CTRL, CLKACT, 25, 1) + FIELD(LPD_LSBUS_CTRL, DIVISOR0, 8, 10) + FIELD(LPD_LSBUS_CTRL, SRCSEL, 0, 3) +REG32(CPU_R5_CTRL, 0x10c) + FIELD(CPU_R5_CTRL, CLKACT_OCM2, 28, 1) + FIELD(CPU_R5_CTRL, CLKACT_OCM, 27, 1) + FIELD(CPU_R5_CTRL, CLKACT_CORE, 26, 1) + FIELD(CPU_R5_CTRL, CLKACT, 25, 1) + FIELD(CPU_R5_CTRL, DIVISOR0, 8, 10) + FIELD(CPU_R5_CTRL, SRCSEL, 0, 3) +REG32(IOU_SWITCH_CTRL, 0x114) + FIELD(IOU_SWITCH_CTRL, CLKACT, 25, 1) + FIELD(IOU_SWITCH_CTRL, DIVISOR0, 8, 10) + FIELD(IOU_SWITCH_CTRL, SRCSEL, 0, 3) +REG32(GEM0_REF_CTRL, 0x118) + FIELD(GEM0_REF_CTRL, CLKACT_RX, 27, 1) + FIELD(GEM0_REF_CTRL, CLKACT_TX, 26, 1) + FIELD(GEM0_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM0_REF_CTRL, SRCSEL, 0, 3) +REG32(GEM1_REF_CTRL, 0x11c) + FIELD(GEM1_REF_CTRL, CLKACT_RX, 27, 1) + FIELD(GEM1_REF_CTRL, CLKACT_TX, 26, 1) + FIELD(GEM1_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM1_REF_CTRL, SRCSEL, 0, 3) +REG32(GEM_TSU_REF_CTRL, 0x120) + FIELD(GEM_TSU_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM_TSU_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM_TSU_REF_CTRL, SRCSEL, 0, 3) +REG32(USB0_BUS_REF_CTRL, 0x124) + FIELD(USB0_BUS_REF_CTRL, CLKACT, 25, 1) + FIELD(USB0_BUS_REF_CTRL, DIVISOR0, 8, 10) + FIELD(USB0_BUS_REF_CTRL, SRCSEL, 0, 3) +REG32(UART0_REF_CTRL, 0x128) + FIELD(UART0_REF_CTRL, CLKACT, 25, 1) + FIELD(UART0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(UART0_REF_CTRL, SRCSEL, 0, 3) +REG32(UART1_REF_CTRL, 0x12c) + FIELD(UART1_REF_CTRL, CLKACT, 25, 1) + FIELD(UART1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(UART1_REF_CTRL, SRCSEL, 0, 3) +REG32(SPI0_REF_CTRL, 0x130) + FIELD(SPI0_REF_CTRL, CLKACT, 25, 1) + FIELD(SPI0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(SPI0_REF_CTRL, SRCSEL, 0, 3) +REG32(SPI1_REF_CTRL, 0x134) + FIELD(SPI1_REF_CTRL, CLKACT, 25, 1) + FIELD(SPI1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(SPI1_REF_CTRL, SRCSEL, 0, 3) +REG32(CAN0_REF_CTRL, 0x138) + FIELD(CAN0_REF_CTRL, CLKACT, 25, 1) + FIELD(CAN0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CAN0_REF_CTRL, SRCSEL, 0, 3) +REG32(CAN1_REF_CTRL, 0x13c) + FIELD(CAN1_REF_CTRL, CLKACT, 25, 1) + FIELD(CAN1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CAN1_REF_CTRL, SRCSEL, 0, 3) +REG32(I2C0_REF_CTRL, 0x140) + FIELD(I2C0_REF_CTRL, CLKACT, 25, 1) + FIELD(I2C0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(I2C0_REF_CTRL, SRCSEL, 0, 3) +REG32(I2C1_REF_CTRL, 0x144) + FIELD(I2C1_REF_CTRL, CLKACT, 25, 1) + FIELD(I2C1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(I2C1_REF_CTRL, SRCSEL, 0, 3) +REG32(DBG_LPD_CTRL, 0x148) + FIELD(DBG_LPD_CTRL, CLKACT, 25, 1) + FIELD(DBG_LPD_CTRL, DIVISOR0, 8, 10) + FIELD(DBG_LPD_CTRL, SRCSEL, 0, 3) +REG32(TIMESTAMP_REF_CTRL, 0x14c) + FIELD(TIMESTAMP_REF_CTRL, CLKACT, 25, 1) + FIELD(TIMESTAMP_REF_CTRL, DIVISOR0, 8, 10) + FIELD(TIMESTAMP_REF_CTRL, SRCSEL, 0, 3) +REG32(CRL_SAFETY_CHK, 0x150) +REG32(PSM_REF_CTRL, 0x154) + FIELD(PSM_REF_CTRL, DIVISOR0, 8, 10) + FIELD(PSM_REF_CTRL, SRCSEL, 0, 3) +REG32(DBG_TSTMP_CTRL, 0x158) + FIELD(DBG_TSTMP_CTRL, CLKACT, 25, 1) + FIELD(DBG_TSTMP_CTRL, DIVISOR0, 8, 10) + FIELD(DBG_TSTMP_CTRL, SRCSEL, 0, 3) +REG32(CPM_TOPSW_REF_CTRL, 0x15c) + FIELD(CPM_TOPSW_REF_CTRL, CLKACT, 25, 1) + FIELD(CPM_TOPSW_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CPM_TOPSW_REF_CTRL, SRCSEL, 0, 3) +REG32(USB3_DUAL_REF_CTRL, 0x160) + FIELD(USB3_DUAL_REF_CTRL, CLKACT, 25, 1) + FIELD(USB3_DUAL_REF_CTRL, DIVISOR0, 8, 10) + FIELD(USB3_DUAL_REF_CTRL, SRCSEL, 0, 3) +REG32(RST_CPU_R5, 0x300) + FIELD(RST_CPU_R5, RESET_PGE, 4, 1) + FIELD(RST_CPU_R5, RESET_AMBA, 2, 1) + FIELD(RST_CPU_R5, RESET_CPU1, 1, 1) + FIELD(RST_CPU_R5, RESET_CPU0, 0, 1) +REG32(RST_ADMA, 0x304) + FIELD(RST_ADMA, RESET, 0, 1) +REG32(RST_GEM0, 0x308) + FIELD(RST_GEM0, RESET, 0, 1) +REG32(RST_GEM1, 0x30c) + FIELD(RST_GEM1, RESET, 0, 1) +REG32(RST_SPARE, 0x310) + FIELD(RST_SPARE, RESET, 0, 1) +REG32(RST_USB0, 0x314) + FIELD(RST_USB0, RESET, 0, 1) +REG32(RST_UART0, 0x318) + FIELD(RST_UART0, RESET, 0, 1) +REG32(RST_UART1, 0x31c) + FIELD(RST_UART1, RESET, 0, 1) +REG32(RST_SPI0, 0x320) + FIELD(RST_SPI0, RESET, 0, 1) +REG32(RST_SPI1, 0x324) + FIELD(RST_SPI1, RESET, 0, 1) +REG32(RST_CAN0, 0x328) + FIELD(RST_CAN0, RESET, 0, 1) +REG32(RST_CAN1, 0x32c) + FIELD(RST_CAN1, RESET, 0, 1) +REG32(RST_I2C0, 0x330) + FIELD(RST_I2C0, RESET, 0, 1) +REG32(RST_I2C1, 0x334) + FIELD(RST_I2C1, RESET, 0, 1) +REG32(RST_DBG_LPD, 0x338) + FIELD(RST_DBG_LPD, RPU_DBG1_RESET, 5, 1) + FIELD(RST_DBG_LPD, RPU_DBG0_RESET, 4, 1) + FIELD(RST_DBG_LPD, RESET_HSDP, 1, 1) + FIELD(RST_DBG_LPD, RESET, 0, 1) +REG32(RST_GPIO, 0x33c) + FIELD(RST_GPIO, RESET, 0, 1) +REG32(RST_TTC, 0x344) + FIELD(RST_TTC, TTC3_RESET, 3, 1) + FIELD(RST_TTC, TTC2_RESET, 2, 1) + FIELD(RST_TTC, TTC1_RESET, 1, 1) + FIELD(RST_TTC, TTC0_RESET, 0, 1) +REG32(RST_TIMESTAMP, 0x348) + FIELD(RST_TIMESTAMP, RESET, 0, 1) +REG32(RST_SWDT, 0x34c) + FIELD(RST_SWDT, RESET, 0, 1) +REG32(RST_OCM, 0x350) + FIELD(RST_OCM, RESET, 0, 1) +REG32(RST_IPI, 0x354) + FIELD(RST_IPI, RESET, 0, 1) +REG32(RST_SYSMON, 0x358) + FIELD(RST_SYSMON, SEQ_RST, 1, 1) + FIELD(RST_SYSMON, CFG_RST, 0, 1) +REG32(RST_FPD, 0x360) + FIELD(RST_FPD, SRST, 1, 1) + FIELD(RST_FPD, POR, 0, 1) +REG32(PSM_RST_MODE, 0x370) + FIELD(PSM_RST_MODE, WAKEUP, 2, 1) + FIELD(PSM_RST_MODE, RST_MODE, 0, 2) + +#define CRL_R_MAX (R_PSM_RST_MODE + 1) + +#define RPU_MAX_CPU 2 + +struct XlnxVersalCRL { + SysBusDevice parent_obj; + qemu_irq irq; + + struct { + ARMCPU *cpu_r5[RPU_MAX_CPU]; + DeviceState *adma[8]; + DeviceState *uart[2]; + DeviceState *gem[2]; + DeviceState *usb; + } cfg; + + RegisterInfoArray *reg_array; + uint32_t regs[CRL_R_MAX]; + RegisterInfo regs_info[CRL_R_MAX]; +}; +#endif diff --git a/hw/misc/xlnx-versal-crl.c b/hw/misc/xlnx-versal-crl.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/xlnx-versal-crl.c @@ -XXX,XX +XXX,XX @@ +/* + * QEMU model of the Clock-Reset-LPD (CRL). + * + * Copyright (c) 2022 Advanced Micro Devices, Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Edgar E. Iglesias <edgar.iglesias@amd.com> + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qemu/log.h" +#include "qemu/bitops.h" +#include "migration/vmstate.h" +#include "hw/qdev-properties.h" +#include "hw/sysbus.h" +#include "hw/irq.h" +#include "hw/register.h" +#include "hw/resettable.h" + +#include "target/arm/arm-powerctl.h" +#include "hw/misc/xlnx-versal-crl.h" + +#ifndef XLNX_VERSAL_CRL_ERR_DEBUG +#define XLNX_VERSAL_CRL_ERR_DEBUG 0 +#endif + +static void crl_update_irq(XlnxVersalCRL *s) +{ + bool pending = s->regs[R_IR_STATUS] & ~s->regs[R_IR_MASK]; + qemu_set_irq(s->irq, pending); +} + +static void crl_status_postw(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + crl_update_irq(s); +} + +static uint64_t crl_enable_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] &= ~val; + crl_update_irq(s); + return 0; +} + +static uint64_t crl_disable_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + uint32_t val = val64; + + s->regs[R_IR_MASK] |= val; + crl_update_irq(s); + return 0; +} + +static void crl_reset_dev(XlnxVersalCRL *s, DeviceState *dev, + bool rst_old, bool rst_new) +{ + device_cold_reset(dev); +} + +static void crl_reset_cpu(XlnxVersalCRL *s, ARMCPU *armcpu, + bool rst_old, bool rst_new) +{ + if (rst_new) { + arm_set_cpu_off(armcpu->mp_affinity); + } else { + arm_set_cpu_on_and_reset(armcpu->mp_affinity); + } +} + +#define REGFIELD_RESET(type, s, reg, f, new_val, dev) { \ + bool old_f = ARRAY_FIELD_EX32((s)->regs, reg, f); \ + bool new_f = FIELD_EX32(new_val, reg, f); \ + \ + /* Detect edges. */ \ + if (dev && old_f != new_f) { \ + crl_reset_ ## type(s, dev, old_f, new_f); \ + } \ +} + +static uint64_t crl_rst_r5_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(cpu, s, RST_CPU_R5, RESET_CPU0, val64, s->cfg.cpu_r5[0]); + REGFIELD_RESET(cpu, s, RST_CPU_R5, RESET_CPU1, val64, s->cfg.cpu_r5[1]); + return val64; +} + +static uint64_t crl_rst_adma_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + int i; + + /* A single register fans out to all ADMA reset inputs. */ + for (i = 0; i < ARRAY_SIZE(s->cfg.adma); i++) { + REGFIELD_RESET(dev, s, RST_ADMA, RESET, val64, s->cfg.adma[i]); + } + return val64; +} + +static uint64_t crl_rst_uart0_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_UART0, RESET, val64, s->cfg.uart[0]); + return val64; +} + +static uint64_t crl_rst_uart1_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_UART1, RESET, val64, s->cfg.uart[1]); + return val64; +} + +static uint64_t crl_rst_gem0_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_GEM0, RESET, val64, s->cfg.gem[0]); + return val64; +} + +static uint64_t crl_rst_gem1_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_GEM1, RESET, val64, s->cfg.gem[1]); + return val64; +} + +static uint64_t crl_rst_usb_prew(RegisterInfo *reg, uint64_t val64) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(reg->opaque); + + REGFIELD_RESET(dev, s, RST_USB0, RESET, val64, s->cfg.usb); + return val64; +} + +static const RegisterAccessInfo crl_regs_info[] = { + { .name = "ERR_CTRL", .addr = A_ERR_CTRL, + },{ .name = "IR_STATUS", .addr = A_IR_STATUS, + .w1c = 0x1, + .post_write = crl_status_postw, + },{ .name = "IR_MASK", .addr = A_IR_MASK, + .reset = 0x1, + .ro = 0x1, + },{ .name = "IR_ENABLE", .addr = A_IR_ENABLE, + .pre_write = crl_enable_prew, + },{ .name = "IR_DISABLE", .addr = A_IR_DISABLE, + .pre_write = crl_disable_prew, + },{ .name = "WPROT", .addr = A_WPROT, + },{ .name = "PLL_CLK_OTHER_DMN", .addr = A_PLL_CLK_OTHER_DMN, + .reset = 0x1, + .rsvd = 0xe, + },{ .name = "RPLL_CTRL", .addr = A_RPLL_CTRL, + .reset = 0x24809, + .rsvd = 0xf88c00f6, + },{ .name = "RPLL_CFG", .addr = A_RPLL_CFG, + .reset = 0x2000000, + .rsvd = 0x1801210, + },{ .name = "RPLL_FRAC_CFG", .addr = A_RPLL_FRAC_CFG, + .rsvd = 0x7e330000, + },{ .name = "PLL_STATUS", .addr = A_PLL_STATUS, + .reset = R_PLL_STATUS_RPLL_STABLE_MASK | + R_PLL_STATUS_RPLL_LOCK_MASK, + .rsvd = 0xfa, + .ro = 0x5, + },{ .name = "RPLL_TO_XPD_CTRL", .addr = A_RPLL_TO_XPD_CTRL, + .reset = 0x2000100, + .rsvd = 0xfdfc00ff, + },{ .name = "LPD_TOP_SWITCH_CTRL", .addr = A_LPD_TOP_SWITCH_CTRL, + .reset = 0x6000300, + .rsvd = 0xf9fc00f8, + },{ .name = "LPD_LSBUS_CTRL", .addr = A_LPD_LSBUS_CTRL, + .reset = 0x2000800, + .rsvd = 0xfdfc00f8, + },{ .name = "CPU_R5_CTRL", .addr = A_CPU_R5_CTRL, + .reset = 0xe000300, + .rsvd = 0xe1fc00f8, + },{ .name = "IOU_SWITCH_CTRL", .addr = A_IOU_SWITCH_CTRL, + .reset = 0x2000500, + .rsvd = 0xfdfc00f8, + },{ .name = "GEM0_REF_CTRL", .addr = A_GEM0_REF_CTRL, + .reset = 0xe000a00, + .rsvd = 0xf1fc00f8, + },{ .name = "GEM1_REF_CTRL", .addr = A_GEM1_REF_CTRL, + .reset = 0xe000a00, + .rsvd = 0xf1fc00f8, + },{ .name = "GEM_TSU_REF_CTRL", .addr = A_GEM_TSU_REF_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "USB0_BUS_REF_CTRL", .addr = A_USB0_BUS_REF_CTRL, + .reset = 0x2001900, + .rsvd = 0xfdfc00f8, + },{ .name = "UART0_REF_CTRL", .addr = A_UART0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "UART1_REF_CTRL", .addr = A_UART1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "SPI0_REF_CTRL", .addr = A_SPI0_REF_CTRL, + .reset = 0x600, + .rsvd = 0xfdfc00f8, + },{ .name = "SPI1_REF_CTRL", .addr = A_SPI1_REF_CTRL, + .reset = 0x600, + .rsvd = 0xfdfc00f8, + },{ .name = "CAN0_REF_CTRL", .addr = A_CAN0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "CAN1_REF_CTRL", .addr = A_CAN1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "I2C0_REF_CTRL", .addr = A_I2C0_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "I2C1_REF_CTRL", .addr = A_I2C1_REF_CTRL, + .reset = 0xc00, + .rsvd = 0xfdfc00f8, + },{ .name = "DBG_LPD_CTRL", .addr = A_DBG_LPD_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "TIMESTAMP_REF_CTRL", .addr = A_TIMESTAMP_REF_CTRL, + .reset = 0x2000c00, + .rsvd = 0xfdfc00f8, + },{ .name = "CRL_SAFETY_CHK", .addr = A_CRL_SAFETY_CHK, + },{ .name = "PSM_REF_CTRL", .addr = A_PSM_REF_CTRL, + .reset = 0xf04, + .rsvd = 0xfffc00f8, + },{ .name = "DBG_TSTMP_CTRL", .addr = A_DBG_TSTMP_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "CPM_TOPSW_REF_CTRL", .addr = A_CPM_TOPSW_REF_CTRL, + .reset = 0x300, + .rsvd = 0xfdfc00f8, + },{ .name = "USB3_DUAL_REF_CTRL", .addr = A_USB3_DUAL_REF_CTRL, + .reset = 0x3c00, + .rsvd = 0xfdfc00f8, + },{ .name = "RST_CPU_R5", .addr = A_RST_CPU_R5, + .reset = 0x17, + .rsvd = 0x8, + .pre_write = crl_rst_r5_prew, + },{ .name = "RST_ADMA", .addr = A_RST_ADMA, + .reset = 0x1, + .pre_write = crl_rst_adma_prew, + },{ .name = "RST_GEM0", .addr = A_RST_GEM0, + .reset = 0x1, + .pre_write = crl_rst_gem0_prew, + },{ .name = "RST_GEM1", .addr = A_RST_GEM1, + .reset = 0x1, + .pre_write = crl_rst_gem1_prew, + },{ .name = "RST_SPARE", .addr = A_RST_SPARE, + .reset = 0x1, + },{ .name = "RST_USB0", .addr = A_RST_USB0, + .reset = 0x1, + .pre_write = crl_rst_usb_prew, + },{ .name = "RST_UART0", .addr = A_RST_UART0, + .reset = 0x1, + .pre_write = crl_rst_uart0_prew, + },{ .name = "RST_UART1", .addr = A_RST_UART1, + .reset = 0x1, + .pre_write = crl_rst_uart1_prew, + },{ .name = "RST_SPI0", .addr = A_RST_SPI0, + .reset = 0x1, + },{ .name = "RST_SPI1", .addr = A_RST_SPI1, + .reset = 0x1, + },{ .name = "RST_CAN0", .addr = A_RST_CAN0, + .reset = 0x1, + },{ .name = "RST_CAN1", .addr = A_RST_CAN1, + .reset = 0x1, + },{ .name = "RST_I2C0", .addr = A_RST_I2C0, + .reset = 0x1, + },{ .name = "RST_I2C1", .addr = A_RST_I2C1, + .reset = 0x1, + },{ .name = "RST_DBG_LPD", .addr = A_RST_DBG_LPD, + .reset = 0x33, + .rsvd = 0xcc, + },{ .name = "RST_GPIO", .addr = A_RST_GPIO, + .reset = 0x1, + },{ .name = "RST_TTC", .addr = A_RST_TTC, + .reset = 0xf, + },{ .name = "RST_TIMESTAMP", .addr = A_RST_TIMESTAMP, + .reset = 0x1, + },{ .name = "RST_SWDT", .addr = A_RST_SWDT, + .reset = 0x1, + },{ .name = "RST_OCM", .addr = A_RST_OCM, + },{ .name = "RST_IPI", .addr = A_RST_IPI, + },{ .name = "RST_FPD", .addr = A_RST_FPD, + .reset = 0x3, + },{ .name = "PSM_RST_MODE", .addr = A_PSM_RST_MODE, + .reset = 0x1, + .rsvd = 0xf8, + } +}; + +static void crl_reset_enter(Object *obj, ResetType type) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { + register_reset(&s->regs_info[i]); + } +} + +static void crl_reset_hold(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + + crl_update_irq(s); +} + +static const MemoryRegionOps crl_ops = { + .read = register_read_memory, + .write = register_write_memory, + .endianness = DEVICE_LITTLE_ENDIAN, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + }, +}; + +static void crl_init(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + int i; + + s->reg_array = + register_init_block32(DEVICE(obj), crl_regs_info, + ARRAY_SIZE(crl_regs_info), + s->regs_info, s->regs, + &crl_ops, + XLNX_VERSAL_CRL_ERR_DEBUG, + CRL_R_MAX * 4); + sysbus_init_mmio(sbd, &s->reg_array->mem); + sysbus_init_irq(sbd, &s->irq); + + for (i = 0; i < ARRAY_SIZE(s->cfg.cpu_r5); ++i) { + object_property_add_link(obj, "cpu_r5[*]", TYPE_ARM_CPU, + (Object **)&s->cfg.cpu_r5[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.adma); ++i) { + object_property_add_link(obj, "adma[*]", TYPE_DEVICE, + (Object **)&s->cfg.adma[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.uart); ++i) { + object_property_add_link(obj, "uart[*]", TYPE_DEVICE, + (Object **)&s->cfg.uart[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + for (i = 0; i < ARRAY_SIZE(s->cfg.gem); ++i) { + object_property_add_link(obj, "gem[*]", TYPE_DEVICE, + (Object **)&s->cfg.gem[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); + } + + object_property_add_link(obj, "usb", TYPE_DEVICE, + (Object **)&s->cfg.gem[i], + qdev_prop_allow_set_link_before_realize, + OBJ_PROP_LINK_STRONG); +} + +static void crl_finalize(Object *obj) +{ + XlnxVersalCRL *s = XLNX_VERSAL_CRL(obj); + register_finalize_block(s->reg_array); +} + +static const VMStateDescription vmstate_crl = { + .name = TYPE_XLNX_VERSAL_CRL, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, XlnxVersalCRL, CRL_R_MAX), + VMSTATE_END_OF_LIST(), + } +}; + +static void crl_class_init(ObjectClass *klass, void *data) +{ + ResettableClass *rc = RESETTABLE_CLASS(klass); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->vmsd = &vmstate_crl; + + rc->phases.enter = crl_reset_enter; + rc->phases.hold = crl_reset_hold; +} + +static const TypeInfo crl_info = { + .name = TYPE_XLNX_VERSAL_CRL, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(XlnxVersalCRL), + .class_init = crl_class_init, + .instance_init = crl_init, + .instance_finalize = crl_finalize, +}; + +static void crl_register_types(void) +{ + type_register_static(&crl_info); +} + +type_init(crl_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ softmmu_ss.add(when: 'CONFIG_SLAVIO', if_true: files('slavio_misc.c')) softmmu_ss.add(when: 'CONFIG_ZYNQ', if_true: files('zynq_slcr.c')) specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-crf.c')) specific_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp-apu-ctrl.c')) +specific_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal-crl.c')) softmmu_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files( 'xlnx-versal-xramc.c', 'xlnx-versal-pmc-iou-slcr.c', -- 2.25.1 From: "Edgar E. Iglesias" <edgar.iglesias@amd.com> Connect the CRL (Clock Reset LPD) to the Versal SoC. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Frederic Konrad <fkonrad@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20220406174303.2022038-5-edgar.iglesias@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-versal.h | 4 +++ hw/arm/xlnx-versal.c | 54 ++++++++++++++++++++++++++++++++++-- 2 files changed, 56 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -XXX,XX +XXX,XX @@ #include "hw/nvram/xlnx-versal-efuse.h" #include "hw/ssi/xlnx-versal-ospi.h" #include "hw/dma/xlnx_csu_dma.h" +#include "hw/misc/xlnx-versal-crl.h" #include "hw/misc/xlnx-versal-pmc-iou-slcr.h" #define TYPE_XLNX_VERSAL "xlnx-versal" @@ -XXX,XX +XXX,XX @@ struct Versal { qemu_or_irq irq_orgate; XlnxXramCtrl ctrl[XLNX_VERSAL_NR_XRAM]; } xram; + + XlnxVersalCRL crl; } lpd; /* The Platform Management Controller subsystem. */ @@ -XXX,XX +XXX,XX @@ struct Versal { #define VERSAL_TIMER_NS_EL1_IRQ 14 #define VERSAL_TIMER_NS_EL2_IRQ 10 +#define VERSAL_CRL_IRQ 10 #define VERSAL_UART0_IRQ_0 18 #define VERSAL_UART1_IRQ_0 19 #define VERSAL_USB0_IRQ_0 22 diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-versal.c +++ b/hw/arm/xlnx-versal.c @@ -XXX,XX +XXX,XX @@ static void versal_create_ospi(Versal *s, qemu_irq *pic) qdev_connect_gpio_out(orgate, 0, pic[VERSAL_OSPI_IRQ]); } +static void versal_create_crl(Versal *s, qemu_irq *pic) +{ + SysBusDevice *sbd; + int i; + + object_initialize_child(OBJECT(s), "crl", &s->lpd.crl, + TYPE_XLNX_VERSAL_CRL); + sbd = SYS_BUS_DEVICE(&s->lpd.crl); + + for (i = 0; i < ARRAY_SIZE(s->lpd.rpu.cpu); i++) { + g_autofree gchar *name = g_strdup_printf("cpu_r5[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.rpu.cpu[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.gem); i++) { + g_autofree gchar *name = g_strdup_printf("gem[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.gem[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.adma); i++) { + g_autofree gchar *name = g_strdup_printf("adma[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.adma[i]), + &error_abort); + } + + for (i = 0; i < ARRAY_SIZE(s->lpd.iou.uart); i++) { + g_autofree gchar *name = g_strdup_printf("uart[%d]", i); + + object_property_set_link(OBJECT(&s->lpd.crl), + name, OBJECT(&s->lpd.iou.uart[i]), + &error_abort); + } + + object_property_set_link(OBJECT(&s->lpd.crl), + "usb", OBJECT(&s->lpd.iou.usb), + &error_abort); + + sysbus_realize(sbd, &error_fatal); + memory_region_add_subregion(&s->mr_ps, MM_CRL, + sysbus_mmio_get_region(sbd, 0)); + sysbus_connect_irq(sbd, 0, pic[VERSAL_CRL_IRQ]); +} + /* This takes the board allocated linear DDR memory and creates aliases * for each split DDR range/aperture on the Versal address map. */ @@ -XXX,XX +XXX,XX @@ static void versal_unimp(Versal *s) versal_unimp_area(s, "psm", &s->mr_ps, MM_PSM_START, MM_PSM_END - MM_PSM_START); - versal_unimp_area(s, "crl", &s->mr_ps, - MM_CRL, MM_CRL_SIZE); versal_unimp_area(s, "crf", &s->mr_ps, MM_FPD_CRF, MM_FPD_CRF_SIZE); versal_unimp_area(s, "apu", &s->mr_ps, @@ -XXX,XX +XXX,XX @@ static void versal_realize(DeviceState *dev, Error **errp) versal_create_efuse(s, pic); versal_create_pmc_iou_slcr(s, pic); versal_create_ospi(s, pic); + versal_create_crl(s, pic); versal_map_ddr(s); versal_unimp(s); -- 2.25.1 The Exynos4210 SoC device currently uses a custom device "exynos4210.irq_gate" to model the OR gate that feeds each CPU's IRQ line. We have a standard TYPE_OR_IRQ device for this now, so use that instead. (This is a migration compatibility break, but that is OK for this machine type.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-2-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 + hw/arm/exynos4210.c | 31 ++++++++++++++++--------------- 2 files changed, 17 insertions(+), 15 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { MemoryRegion bootreg_mem; I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER]; qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; + qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) { Exynos4210State *s = EXYNOS4210_SOC(socdev); MemoryRegion *system_mem = get_system_memory(); - qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS]; SysBusDevice *busdev; DeviceState *dev, *uart[4], *pl330[3]; int i, n; @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) /* IRQ Gate */ for (i = 0; i < EXYNOS4210_NCPUS; i++) { - dev = qdev_new("exynos4210.irq_gate"); - qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS); - sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); - /* Get IRQ Gate input in gate_irq */ - for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) { - gate_irq[i][n] = qdev_get_gpio_in(dev, n); - } - busdev = SYS_BUS_DEVICE(dev); - - /* Connect IRQ Gate output to CPU's IRQ line */ - sysbus_connect_irq(busdev, 0, - qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); + DeviceState *orgate = DEVICE(&s->cpu_irq_orgate[i]); + object_property_set_int(OBJECT(orgate), "num-lines", + EXYNOS4210_IRQ_GATE_NINPUTS, + &error_abort); + qdev_realize(orgate, NULL, &error_abort); + qdev_connect_gpio_out(orgate, 0, + qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); } /* Private memory region and Internal GIC */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_realize_and_unref(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { - sysbus_connect_irq(busdev, n, gate_irq[n][0]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) /* Map Distributer interface */ sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { - sysbus_connect_irq(busdev, n, gate_irq[n][1]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n); @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, name, orgate, TYPE_OR_IRQ); g_free(name); } + + for (i = 0; i < ARRAY_SIZE(s->cpu_irq_orgate); i++) { + g_autofree char *name = g_strdup_printf("cpu-irq-orgate%d", i); + object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); + } } static void exynos4210_class_init(ObjectClass *klass, void *data) -- 2.25.1 Now we have removed the only use of TYPE_EXYNOS4210_IRQ_GATE we can delete the device entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20220404154658.565020-3-peter.maydell@linaro.org --- hw/intc/exynos4210_gic.c | 107 --------------------------------------- 1 file changed, 107 deletions(-) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_gic_register_types(void) } type_init(exynos4210_gic_register_types) - -/* IRQ OR Gate struct. - * - * This device models an OR gate. There are n_in input qdev gpio lines and one - * output sysbus IRQ line. The output IRQ level is formed as OR between all - * gpio inputs. - */ - -#define TYPE_EXYNOS4210_IRQ_GATE "exynos4210.irq_gate" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210IRQGateState, EXYNOS4210_IRQ_GATE) - -struct Exynos4210IRQGateState { - SysBusDevice parent_obj; - - uint32_t n_in; /* inputs amount */ - uint32_t *level; /* input levels */ - qemu_irq out; /* output IRQ */ -}; - -static Property exynos4210_irq_gate_properties[] = { - DEFINE_PROP_UINT32("n_in", Exynos4210IRQGateState, n_in, 1), - DEFINE_PROP_END_OF_LIST(), -}; - -static const VMStateDescription vmstate_exynos4210_irq_gate = { - .name = "exynos4210.irq_gate", - .version_id = 2, - .minimum_version_id = 2, - .fields = (VMStateField[]) { - VMSTATE_VBUFFER_UINT32(level, Exynos4210IRQGateState, 1, NULL, n_in), - VMSTATE_END_OF_LIST() - } -}; - -/* Process a change in IRQ input. */ -static void exynos4210_irq_gate_handler(void *opaque, int irq, int level) -{ - Exynos4210IRQGateState *s = (Exynos4210IRQGateState *)opaque; - uint32_t i; - - assert(irq < s->n_in); - - s->level[irq] = level; - - for (i = 0; i < s->n_in; i++) { - if (s->level[i] >= 1) { - qemu_irq_raise(s->out); - return; - } - } - - qemu_irq_lower(s->out); -} - -static void exynos4210_irq_gate_reset(DeviceState *d) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(d); - - memset(s->level, 0, s->n_in * sizeof(*s->level)); -} - -/* - * IRQ Gate initialization. - */ -static void exynos4210_irq_gate_init(Object *obj) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(obj); - SysBusDevice *sbd = SYS_BUS_DEVICE(obj); - - sysbus_init_irq(sbd, &s->out); -} - -static void exynos4210_irq_gate_realize(DeviceState *dev, Error **errp) -{ - Exynos4210IRQGateState *s = EXYNOS4210_IRQ_GATE(dev); - - /* Allocate general purpose input signals and connect a handler to each of - * them */ - qdev_init_gpio_in(dev, exynos4210_irq_gate_handler, s->n_in); - - s->level = g_malloc0(s->n_in * sizeof(*s->level)); -} - -static void exynos4210_irq_gate_class_init(ObjectClass *klass, void *data) -{ - DeviceClass *dc = DEVICE_CLASS(klass); - - dc->reset = exynos4210_irq_gate_reset; - dc->vmsd = &vmstate_exynos4210_irq_gate; - device_class_set_props(dc, exynos4210_irq_gate_properties); - dc->realize = exynos4210_irq_gate_realize; -} - -static const TypeInfo exynos4210_irq_gate_info = { - .name = TYPE_EXYNOS4210_IRQ_GATE, - .parent = TYPE_SYS_BUS_DEVICE, - .instance_size = sizeof(Exynos4210IRQGateState), - .instance_init = exynos4210_irq_gate_init, - .class_init = exynos4210_irq_gate_class_init, -}; - -static void exynos4210_irq_gate_register_types(void) -{ - type_register_static(&exynos4210_irq_gate_info); -} - -type_init(exynos4210_irq_gate_register_types) -- 2.25.1 The exynos4210 SoC mostly creates its child devices as if it were board code. This includes the a9mpcore object. Switch that to a new-style "embedded in the state struct" creation, because in the next commit we're going to want to refer to the object again further down in the exynos4210_realize() function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-4-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 ++ hw/arm/exynos4210.c | 11 ++++++----- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/sysbus.h" +#include "hw/cpu/a9mpcore.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER]; qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; + A9MPPrivState a9mpcore; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) } /* Private memory region and Internal GIC */ - dev = qdev_new(TYPE_A9MPCORE_PRIV); - qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->a9mpcore), "num-cpu", EXYNOS4210_NCPUS); + busdev = SYS_BUS_DEVICE(&s->a9mpcore); + sysbus_realize(busdev, &error_fatal); sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR); for (n = 0; n < EXYNOS4210_NCPUS; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { - s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n); + s->irqs.int_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->a9mpcore), n); } /* Cache controller */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) g_autofree char *name = g_strdup_printf("cpu-irq-orgate%d", i); object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); } + + object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); } static void exynos4210_class_init(ObjectClass *klass, void *data) -- 2.25.1 The only time we use the int_gic_irq[] array in the Exynos4210Irq struct is in the exynos4210_realize() function: we initialize it with the GPIO inputs of the a9mpcore device, and then a bit later on we connect those to the outputs of the internal combiner. Now that the a9mpcore object is easily accessible as s->a9mpcore we can make the connection directly from one device to the other without going via this array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-5-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 - hw/arm/exynos4210.c | 6 ++---- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; - qemu_irq int_gic_irq[EXYNOS4210_INT_GIC_NIRQ]; qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; } Exynos4210Irq; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 0)); } - for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) { - s->irqs.int_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->a9mpcore), n); - } /* Cache controller */ sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { - sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]); + sysbus_connect_irq(busdev, n, + qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } exynos4210_combiner_get_gpioin(&s->irqs, dev, 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); -- 2.25.1 The exynos4210 code currently has two very similar arrays of IRQs: * board_irqs is a field of the Exynos4210Irq struct which is filled in by exynos4210_init_board_irqs() with the appropriate qemu_irqs for each IRQ the board/SoC can assert * irq_table is a set of qemu_irqs pointed to from the Exynos4210State struct. It's allocated in exynos4210_init_irq, and the only behaviour these irqs have is that they pass on the level to the equivalent board_irqs[] irq The extra indirection through irq_table is unnecessary, so coalesce these into a single irq_table[] array as a direct field in Exynos4210State which exynos4210_init_board_irqs() fills in. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-6-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 8 ++------ hw/arm/exynos4210.c | 6 +----- hw/intc/exynos4210_gic.c | 32 ++++++++------------------------ 3 files changed, 11 insertions(+), 35 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; - qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; } Exynos4210Irq; struct Exynos4210State { @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { /*< public >*/ ARMCPU *cpu[EXYNOS4210_NCPUS]; Exynos4210Irq irqs; - qemu_irq *irq_table; + qemu_irq irq_table[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; MemoryRegion chipid_mem; MemoryRegion iram_mem; @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210State, EXYNOS4210_SOC) void exynos4210_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info); -/* Initialize exynos4210 IRQ subsystem stub */ -qemu_irq *exynos4210_init_irq(Exynos4210Irq *env); - /* Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs */ -void exynos4210_init_board_irqs(Exynos4210Irq *s); +void exynos4210_init_board_irqs(Exynos4210State *s); /* Get IRQ number from exynos4210 IRQ subsystem stub. * To identify IRQ source use internal combiner group and bit number diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) qdev_realize(DEVICE(cpuobj), NULL, &error_fatal); } - /*** IRQs ***/ - - s->irq_table = exynos4210_init_irq(&s->irqs); - /* IRQ Gate */ for (i = 0; i < EXYNOS4210_NCPUS; i++) { DeviceState *orgate = DEVICE(&s->cpu_irq_orgate[i]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ - exynos4210_init_board_irqs(&s->irqs); + exynos4210_init_board_irqs(s); /*** Memory ***/ diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64-EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -static void exynos4210_irq_handler(void *opaque, int irq, int level) -{ - Exynos4210Irq *s = (Exynos4210Irq *)opaque; - - /* Bypass */ - qemu_set_irq(s->board_irqs[irq], level); -} - -/* - * Initialize exynos4210 IRQ subsystem stub. - */ -qemu_irq *exynos4210_init_irq(Exynos4210Irq *s) -{ - return qemu_allocate_irqs(exynos4210_irq_handler, s, - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ); -} - /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. */ -void exynos4210_init_board_irqs(Exynos4210Irq *s) +void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; + Exynos4210Irq *is = &s->irqs; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ void exynos4210_init_board_irqs(Exynos4210Irq *s) irq_id = EXT_GIC_ID_MCT_G1; } if (irq_id) { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_gic_irq[irq_id-32]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); } else { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_combiner_irq[n]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { @@ -XXX,XX +XXX,XX @@ void exynos4210_init_board_irqs(Exynos4210Irq *s) EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; if (irq_id) { - s->board_irqs[n] = qemu_irq_split(s->int_combiner_irq[n], - s->ext_gic_irq[irq_id-32]); + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); } } } -- 2.25.1 Fix a missing set of spaces around '-' in the definition of combiner_grp_to_gic_id[]. We're about to move this code, so fix the style issue first to keep checkpatch happy with the code-motion patch. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-7-peter.maydell@linaro.org --- hw/intc/exynos4210_gic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ enum ExtInt { */ static const uint32_t -combiner_grp_to_gic_id[64-EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { +combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* int combiner groups 16-19 */ { }, { }, { }, { }, /* int combiner group 20 */ -- 2.25.1 The function exynos4210_init_board_irqs() currently lives in exynos4210_gic.c, but it isn't really part of the exynos4210.gic device -- it is a function that implements (some of) the wiring up of interrupts between the SoC's GIC and combiner components. This means it fits better in exynos4210.c, which is the SoC-level code. Move it there. Similarly, exynos4210_git_irq() is used almost only in the SoC-level code, so move it too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-8-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 4 - hw/arm/exynos4210.c | 202 +++++++++++++++++++++++++++++++++++ hw/intc/exynos4210_gic.c | 204 ------------------------------------ 3 files changed, 202 insertions(+), 208 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210State, EXYNOS4210_SOC) void exynos4210_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info); -/* Initialize board IRQs. - * These IRQs contain splitted Int/External Combiner and External Gic IRQs */ -void exynos4210_init_board_irqs(Exynos4210State *s); - /* Get IRQ number from exynos4210 IRQ subsystem stub. * To identify IRQ source use internal combiner group and bit number * grp - group number diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_PL330_BASE1_ADDR 0x12690000 #define EXYNOS4210_PL330_BASE2_ADDR 0x12850000 +enum ExtGicId { + EXT_GIC_ID_MDMA_LCD0 = 66, + EXT_GIC_ID_PDMA0, + EXT_GIC_ID_PDMA1, + EXT_GIC_ID_TIMER0, + EXT_GIC_ID_TIMER1, + EXT_GIC_ID_TIMER2, + EXT_GIC_ID_TIMER3, + EXT_GIC_ID_TIMER4, + EXT_GIC_ID_MCT_L0, + EXT_GIC_ID_WDT, + EXT_GIC_ID_RTC_ALARM, + EXT_GIC_ID_RTC_TIC, + EXT_GIC_ID_GPIO_XB, + EXT_GIC_ID_GPIO_XA, + EXT_GIC_ID_MCT_L1, + EXT_GIC_ID_IEM_APC, + EXT_GIC_ID_IEM_IEC, + EXT_GIC_ID_NFC, + EXT_GIC_ID_UART0, + EXT_GIC_ID_UART1, + EXT_GIC_ID_UART2, + EXT_GIC_ID_UART3, + EXT_GIC_ID_UART4, + EXT_GIC_ID_MCT_G0, + EXT_GIC_ID_I2C0, + EXT_GIC_ID_I2C1, + EXT_GIC_ID_I2C2, + EXT_GIC_ID_I2C3, + EXT_GIC_ID_I2C4, + EXT_GIC_ID_I2C5, + EXT_GIC_ID_I2C6, + EXT_GIC_ID_I2C7, + EXT_GIC_ID_SPI0, + EXT_GIC_ID_SPI1, + EXT_GIC_ID_SPI2, + EXT_GIC_ID_MCT_G1, + EXT_GIC_ID_USB_HOST, + EXT_GIC_ID_USB_DEVICE, + EXT_GIC_ID_MODEMIF, + EXT_GIC_ID_HSMMC0, + EXT_GIC_ID_HSMMC1, + EXT_GIC_ID_HSMMC2, + EXT_GIC_ID_HSMMC3, + EXT_GIC_ID_SDMMC, + EXT_GIC_ID_MIPI_CSI_4LANE, + EXT_GIC_ID_MIPI_DSI_4LANE, + EXT_GIC_ID_MIPI_CSI_2LANE, + EXT_GIC_ID_MIPI_DSI_2LANE, + EXT_GIC_ID_ONENAND_AUDI, + EXT_GIC_ID_ROTATOR, + EXT_GIC_ID_FIMC0, + EXT_GIC_ID_FIMC1, + EXT_GIC_ID_FIMC2, + EXT_GIC_ID_FIMC3, + EXT_GIC_ID_JPEG, + EXT_GIC_ID_2D, + EXT_GIC_ID_PCIe, + EXT_GIC_ID_MIXER, + EXT_GIC_ID_HDMI, + EXT_GIC_ID_HDMI_I2C, + EXT_GIC_ID_MFC, + EXT_GIC_ID_TVENC, +}; + +enum ExtInt { + EXT_GIC_ID_EXTINT0 = 48, + EXT_GIC_ID_EXTINT1, + EXT_GIC_ID_EXTINT2, + EXT_GIC_ID_EXTINT3, + EXT_GIC_ID_EXTINT4, + EXT_GIC_ID_EXTINT5, + EXT_GIC_ID_EXTINT6, + EXT_GIC_ID_EXTINT7, + EXT_GIC_ID_EXTINT8, + EXT_GIC_ID_EXTINT9, + EXT_GIC_ID_EXTINT10, + EXT_GIC_ID_EXTINT11, + EXT_GIC_ID_EXTINT12, + EXT_GIC_ID_EXTINT13, + EXT_GIC_ID_EXTINT14, + EXT_GIC_ID_EXTINT15 +}; + +/* + * External GIC sources which are not from External Interrupt Combiner or + * External Interrupts are starting from EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ, + * which is INTG16 in Internal Interrupt Combiner. + */ + +static const uint32_t +combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { + /* int combiner groups 16-19 */ + { }, { }, { }, { }, + /* int combiner group 20 */ + { 0, EXT_GIC_ID_MDMA_LCD0 }, + /* int combiner group 21 */ + { EXT_GIC_ID_PDMA0, EXT_GIC_ID_PDMA1 }, + /* int combiner group 22 */ + { EXT_GIC_ID_TIMER0, EXT_GIC_ID_TIMER1, EXT_GIC_ID_TIMER2, + EXT_GIC_ID_TIMER3, EXT_GIC_ID_TIMER4 }, + /* int combiner group 23 */ + { EXT_GIC_ID_RTC_ALARM, EXT_GIC_ID_RTC_TIC }, + /* int combiner group 24 */ + { EXT_GIC_ID_GPIO_XB, EXT_GIC_ID_GPIO_XA }, + /* int combiner group 25 */ + { EXT_GIC_ID_IEM_APC, EXT_GIC_ID_IEM_IEC }, + /* int combiner group 26 */ + { EXT_GIC_ID_UART0, EXT_GIC_ID_UART1, EXT_GIC_ID_UART2, EXT_GIC_ID_UART3, + EXT_GIC_ID_UART4 }, + /* int combiner group 27 */ + { EXT_GIC_ID_I2C0, EXT_GIC_ID_I2C1, EXT_GIC_ID_I2C2, EXT_GIC_ID_I2C3, + EXT_GIC_ID_I2C4, EXT_GIC_ID_I2C5, EXT_GIC_ID_I2C6, + EXT_GIC_ID_I2C7 }, + /* int combiner group 28 */ + { EXT_GIC_ID_SPI0, EXT_GIC_ID_SPI1, EXT_GIC_ID_SPI2 , EXT_GIC_ID_USB_HOST}, + /* int combiner group 29 */ + { EXT_GIC_ID_HSMMC0, EXT_GIC_ID_HSMMC1, EXT_GIC_ID_HSMMC2, + EXT_GIC_ID_HSMMC3, EXT_GIC_ID_SDMMC }, + /* int combiner group 30 */ + { EXT_GIC_ID_MIPI_CSI_4LANE, EXT_GIC_ID_MIPI_CSI_2LANE }, + /* int combiner group 31 */ + { EXT_GIC_ID_MIPI_DSI_4LANE, EXT_GIC_ID_MIPI_DSI_2LANE }, + /* int combiner group 32 */ + { EXT_GIC_ID_FIMC0, EXT_GIC_ID_FIMC1 }, + /* int combiner group 33 */ + { EXT_GIC_ID_FIMC2, EXT_GIC_ID_FIMC3 }, + /* int combiner group 34 */ + { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, + /* int combiner group 35 */ + { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* int combiner group 36 */ + { EXT_GIC_ID_MIXER }, + /* int combiner group 37 */ + { EXT_GIC_ID_EXTINT4, EXT_GIC_ID_EXTINT5, EXT_GIC_ID_EXTINT6, + EXT_GIC_ID_EXTINT7 }, + /* groups 38-50 */ + { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, + /* int combiner group 51 */ + { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* group 52 */ + { }, + /* int combiner group 53 */ + { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + /* groups 54-63 */ + { }, { }, { }, { }, { }, { }, { }, { }, { }, { } +}; + +/* + * Initialize board IRQs. + * These IRQs contain splitted Int/External Combiner and External Gic IRQs. + */ +static void exynos4210_init_board_irqs(Exynos4210State *s) +{ + uint32_t grp, bit, irq_id, n; + Exynos4210Irq *is = &s->irqs; + + for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { + irq_id = 0; + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || + n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { + /* MCT_G0 is passed to External GIC */ + irq_id = EXT_GIC_ID_MCT_G0; + } + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || + n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { + /* MCT_G1 is passed to External and GIC */ + irq_id = EXT_GIC_ID_MCT_G1; + } + if (irq_id) { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); + } else { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_combiner_irq[n]); + } + } + for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { + /* these IDs are passed to Internal Combiner and External GIC */ + grp = EXYNOS4210_COMBINER_GET_GRP_NUM(n); + bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); + irq_id = combiner_grp_to_gic_id[grp - + EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; + + if (irq_id) { + s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], + is->ext_gic_irq[irq_id - 32]); + } + } +} + +/* + * Get IRQ number from exynos4210 IRQ subsystem stub. + * To identify IRQ source use internal combiner group and bit number + * grp - group number + * bit - bit number inside group + */ +uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) +{ + return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); +} + static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ #include "hw/arm/exynos4210.h" #include "qom/object.h" -enum ExtGicId { - EXT_GIC_ID_MDMA_LCD0 = 66, - EXT_GIC_ID_PDMA0, - EXT_GIC_ID_PDMA1, - EXT_GIC_ID_TIMER0, - EXT_GIC_ID_TIMER1, - EXT_GIC_ID_TIMER2, - EXT_GIC_ID_TIMER3, - EXT_GIC_ID_TIMER4, - EXT_GIC_ID_MCT_L0, - EXT_GIC_ID_WDT, - EXT_GIC_ID_RTC_ALARM, - EXT_GIC_ID_RTC_TIC, - EXT_GIC_ID_GPIO_XB, - EXT_GIC_ID_GPIO_XA, - EXT_GIC_ID_MCT_L1, - EXT_GIC_ID_IEM_APC, - EXT_GIC_ID_IEM_IEC, - EXT_GIC_ID_NFC, - EXT_GIC_ID_UART0, - EXT_GIC_ID_UART1, - EXT_GIC_ID_UART2, - EXT_GIC_ID_UART3, - EXT_GIC_ID_UART4, - EXT_GIC_ID_MCT_G0, - EXT_GIC_ID_I2C0, - EXT_GIC_ID_I2C1, - EXT_GIC_ID_I2C2, - EXT_GIC_ID_I2C3, - EXT_GIC_ID_I2C4, - EXT_GIC_ID_I2C5, - EXT_GIC_ID_I2C6, - EXT_GIC_ID_I2C7, - EXT_GIC_ID_SPI0, - EXT_GIC_ID_SPI1, - EXT_GIC_ID_SPI2, - EXT_GIC_ID_MCT_G1, - EXT_GIC_ID_USB_HOST, - EXT_GIC_ID_USB_DEVICE, - EXT_GIC_ID_MODEMIF, - EXT_GIC_ID_HSMMC0, - EXT_GIC_ID_HSMMC1, - EXT_GIC_ID_HSMMC2, - EXT_GIC_ID_HSMMC3, - EXT_GIC_ID_SDMMC, - EXT_GIC_ID_MIPI_CSI_4LANE, - EXT_GIC_ID_MIPI_DSI_4LANE, - EXT_GIC_ID_MIPI_CSI_2LANE, - EXT_GIC_ID_MIPI_DSI_2LANE, - EXT_GIC_ID_ONENAND_AUDI, - EXT_GIC_ID_ROTATOR, - EXT_GIC_ID_FIMC0, - EXT_GIC_ID_FIMC1, - EXT_GIC_ID_FIMC2, - EXT_GIC_ID_FIMC3, - EXT_GIC_ID_JPEG, - EXT_GIC_ID_2D, - EXT_GIC_ID_PCIe, - EXT_GIC_ID_MIXER, - EXT_GIC_ID_HDMI, - EXT_GIC_ID_HDMI_I2C, - EXT_GIC_ID_MFC, - EXT_GIC_ID_TVENC, -}; - -enum ExtInt { - EXT_GIC_ID_EXTINT0 = 48, - EXT_GIC_ID_EXTINT1, - EXT_GIC_ID_EXTINT2, - EXT_GIC_ID_EXTINT3, - EXT_GIC_ID_EXTINT4, - EXT_GIC_ID_EXTINT5, - EXT_GIC_ID_EXTINT6, - EXT_GIC_ID_EXTINT7, - EXT_GIC_ID_EXTINT8, - EXT_GIC_ID_EXTINT9, - EXT_GIC_ID_EXTINT10, - EXT_GIC_ID_EXTINT11, - EXT_GIC_ID_EXTINT12, - EXT_GIC_ID_EXTINT13, - EXT_GIC_ID_EXTINT14, - EXT_GIC_ID_EXTINT15 -}; - -/* - * External GIC sources which are not from External Interrupt Combiner or - * External Interrupts are starting from EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ, - * which is INTG16 in Internal Interrupt Combiner. - */ - -static const uint32_t -combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { - /* int combiner groups 16-19 */ - { }, { }, { }, { }, - /* int combiner group 20 */ - { 0, EXT_GIC_ID_MDMA_LCD0 }, - /* int combiner group 21 */ - { EXT_GIC_ID_PDMA0, EXT_GIC_ID_PDMA1 }, - /* int combiner group 22 */ - { EXT_GIC_ID_TIMER0, EXT_GIC_ID_TIMER1, EXT_GIC_ID_TIMER2, - EXT_GIC_ID_TIMER3, EXT_GIC_ID_TIMER4 }, - /* int combiner group 23 */ - { EXT_GIC_ID_RTC_ALARM, EXT_GIC_ID_RTC_TIC }, - /* int combiner group 24 */ - { EXT_GIC_ID_GPIO_XB, EXT_GIC_ID_GPIO_XA }, - /* int combiner group 25 */ - { EXT_GIC_ID_IEM_APC, EXT_GIC_ID_IEM_IEC }, - /* int combiner group 26 */ - { EXT_GIC_ID_UART0, EXT_GIC_ID_UART1, EXT_GIC_ID_UART2, EXT_GIC_ID_UART3, - EXT_GIC_ID_UART4 }, - /* int combiner group 27 */ - { EXT_GIC_ID_I2C0, EXT_GIC_ID_I2C1, EXT_GIC_ID_I2C2, EXT_GIC_ID_I2C3, - EXT_GIC_ID_I2C4, EXT_GIC_ID_I2C5, EXT_GIC_ID_I2C6, - EXT_GIC_ID_I2C7 }, - /* int combiner group 28 */ - { EXT_GIC_ID_SPI0, EXT_GIC_ID_SPI1, EXT_GIC_ID_SPI2 , EXT_GIC_ID_USB_HOST}, - /* int combiner group 29 */ - { EXT_GIC_ID_HSMMC0, EXT_GIC_ID_HSMMC1, EXT_GIC_ID_HSMMC2, - EXT_GIC_ID_HSMMC3, EXT_GIC_ID_SDMMC }, - /* int combiner group 30 */ - { EXT_GIC_ID_MIPI_CSI_4LANE, EXT_GIC_ID_MIPI_CSI_2LANE }, - /* int combiner group 31 */ - { EXT_GIC_ID_MIPI_DSI_4LANE, EXT_GIC_ID_MIPI_DSI_2LANE }, - /* int combiner group 32 */ - { EXT_GIC_ID_FIMC0, EXT_GIC_ID_FIMC1 }, - /* int combiner group 33 */ - { EXT_GIC_ID_FIMC2, EXT_GIC_ID_FIMC3 }, - /* int combiner group 34 */ - { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, - /* int combiner group 35 */ - { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* int combiner group 36 */ - { EXT_GIC_ID_MIXER }, - /* int combiner group 37 */ - { EXT_GIC_ID_EXTINT4, EXT_GIC_ID_EXTINT5, EXT_GIC_ID_EXTINT6, - EXT_GIC_ID_EXTINT7 }, - /* groups 38-50 */ - { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, - /* int combiner group 51 */ - { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* group 52 */ - { }, - /* int combiner group 53 */ - { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, - /* groups 54-63 */ - { }, { }, { }, { }, { }, { }, { }, { }, { }, { } -}; - #define EXYNOS4210_GIC_NIRQ 160 #define EXYNOS4210_EXT_GIC_CPU_REGION_SIZE 0x10000 @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -/* - * Initialize board IRQs. - * These IRQs contain splitted Int/External Combiner and External Gic IRQs. - */ -void exynos4210_init_board_irqs(Exynos4210State *s) -{ - uint32_t grp, bit, irq_id, n; - Exynos4210Irq *is = &s->irqs; - - for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { - irq_id = 0; - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { - /* MCT_G0 is passed to External GIC */ - irq_id = EXT_GIC_ID_MCT_G0; - } - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { - /* MCT_G1 is passed to External and GIC */ - irq_id = EXT_GIC_ID_MCT_G1; - } - if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); - } else { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_combiner_irq[n]); - } - } - for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { - /* these IDs are passed to Internal Combiner and External GIC */ - grp = EXYNOS4210_COMBINER_GET_GRP_NUM(n); - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - irq_id = combiner_grp_to_gic_id[grp - - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; - - if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); - } - } -} - -/* - * Get IRQ number from exynos4210 IRQ subsystem stub. - * To identify IRQ source use internal combiner group and bit number - * grp - group number - * bit - bit number inside group - */ -uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) -{ - return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); -} - -/********* GIC part *********/ - #define TYPE_EXYNOS4210_GIC "exynos4210.gic" OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) -- 2.25.1 Switch the creation of the external GIC to the new-style "embedded in state struct" approach, so we can easily refer to the object elsewhere during realize. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-9-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 ++ include/hw/intc/exynos4210_gic.h | 43 ++++++++++++++++++++++++++++++++ hw/arm/exynos4210.c | 10 ++++---- hw/intc/exynos4210_gic.c | 17 ++----------- MAINTAINERS | 2 +- 5 files changed, 53 insertions(+), 21 deletions(-) create mode 100644 include/hw/intc/exynos4210_gic.h diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/or-irq.h" #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" +#include "hw/intc/exynos4210_gic.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; + Exynos4210GicState ext_gic; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/include/hw/intc/exynos4210_gic.h b/include/hw/intc/exynos4210_gic.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/intc/exynos4210_gic.h @@ -XXX,XX +XXX,XX @@ +/* + * Samsung exynos4210 GIC implementation. Based on hw/arm_gic.c + * + * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. + * All rights reserved. + * + * Evgeny Voevodin <e.voevodin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HW_INTC_EXYNOS4210_GIC_H +#define HW_INTC_EXYNOS4210_GIC_H + +#include "hw/sysbus.h" + +#define TYPE_EXYNOS4210_GIC "exynos4210.gic" +OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) + +#define EXYNOS4210_GIC_NCPUS 2 + +struct Exynos4210GicState { + SysBusDevice parent_obj; + + MemoryRegion cpu_container; + MemoryRegion dist_container; + MemoryRegion cpu_alias[EXYNOS4210_GIC_NCPUS]; + MemoryRegion dist_alias[EXYNOS4210_GIC_NCPUS]; + uint32_t num_cpu; + DeviceState *gic; +}; + +#endif diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL); /* External GIC */ - dev = qdev_new("exynos4210.gic"); - qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->ext_gic), "num-cpu", EXYNOS4210_NCPUS); + busdev = SYS_BUS_DEVICE(&s->ext_gic); + sysbus_realize(busdev, &error_fatal); /* Map CPU interface */ sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR); /* Map Distributer interface */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { - s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n); + s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->ext_gic), n); } /* Internal Interrupt Combiner */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) } object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); + object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); } static void exynos4210_class_init(ObjectClass *klass, void *data) diff --git a/hw/intc/exynos4210_gic.c b/hw/intc/exynos4210_gic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_gic.c +++ b/hw/intc/exynos4210_gic.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "hw/irq.h" #include "hw/qdev-properties.h" +#include "hw/intc/exynos4210_gic.h" #include "hw/arm/exynos4210.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_GIC_CPU_REGION_SIZE 0x100 #define EXYNOS4210_GIC_DIST_REGION_SIZE 0x1000 -#define TYPE_EXYNOS4210_GIC "exynos4210.gic" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) - -struct Exynos4210GicState { - SysBusDevice parent_obj; - - MemoryRegion cpu_container; - MemoryRegion dist_container; - MemoryRegion cpu_alias[EXYNOS4210_NCPUS]; - MemoryRegion dist_alias[EXYNOS4210_NCPUS]; - uint32_t num_cpu; - DeviceState *gic; -}; - static void exynos4210_gic_set_irq(void *opaque, int irq, int level) { Exynos4210GicState *s = (Exynos4210GicState *)opaque; @@ -XXX,XX +XXX,XX @@ static void exynos4210_gic_realize(DeviceState *dev, Error **errp) * enough room for the cpu numbers. gcc 9.2.1 on 32-bit x86 * doesn't figure this out, otherwise and gives spurious warnings. */ - assert(n <= EXYNOS4210_NCPUS); + assert(n <= EXYNOS4210_GIC_NCPUS); for (i = 0; i < n; i++) { /* Map CPU interface per SMP Core */ sprintf(cpu_alias_name, "%s%x", cpu_prefix, i); diff --git a/MAINTAINERS b/MAINTAINERS index XXXXXXX..XXXXXXX 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -XXX,XX +XXX,XX @@ M: Peter Maydell <peter.maydell@linaro.org> L: qemu-arm@nongnu.org S: Odd Fixes F: hw/*/exynos* -F: include/hw/arm/exynos4210.h +F: include/hw/*/exynos* Calxeda Highbank M: Rob Herring <robh@kernel.org> -- 2.25.1 The only time we use the ext_gic_irq[] array in the Exynos4210Irq struct is during realize of the SoC -- we initialize it with the input IRQs of the external GIC device, and then connect those to outputs of other devices further on in realize (including in the exynos4210_init_board_irqs() function). Now that the ext_gic object is easily accessible as s->ext_gic we can make the connections directly from one device to the other without going via this array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-10-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 1 - hw/arm/exynos4210.c | 12 ++++++------ 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; - qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; } Exynos4210Irq; struct Exynos4210State { diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; Exynos4210Irq *is = &s->irqs; + DeviceState *extgicdev = DEVICE(&s->ext_gic); for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) } if (irq_id) { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); + qdev_get_gpio_in(extgicdev, + irq_id - 32)); } else { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], is->ext_combiner_irq[n]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) if (irq_id) { s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_gic_irq[irq_id - 32]); + qdev_get_gpio_in(extgicdev, + irq_id - 32)); } } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->cpu_irq_orgate[n]), 1)); } - for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) { - s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(DEVICE(&s->ext_gic), n); - } /* Internal Interrupt Combiner */ dev = qdev_new("exynos4210.combiner"); @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) busdev = SYS_BUS_DEVICE(dev); sysbus_realize_and_unref(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { - sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]); + sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } exynos4210_combiner_get_gpioin(&s->irqs, dev, 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); -- 2.25.1 The function exynos4210_combiner_get_gpioin() currently lives in exynos4210_combiner.c, but it isn't really part of the combiner device itself -- it is a function that implements the wiring up of some interrupt sources to multiple combiner inputs. Move it to live with the other SoC-level code in exynos4210.c, along with a few macros previously defined in exynos4210.h which are now used only in exynos4210.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-11-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 11 ----- hw/arm/exynos4210.c | 82 +++++++++++++++++++++++++++++++++++ hw/intc/exynos4210_combiner.c | 77 -------------------------------- 3 files changed, 82 insertions(+), 88 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \ (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8) -#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp)*8 + (bit)) -#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) -#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ - ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) - /* IRQs number for external and internal GIC */ #define EXYNOS4210_EXT_GIC_NIRQ (160-32) #define EXYNOS4210_INT_GIC_NIRQ 64 @@ -XXX,XX +XXX,XX @@ void exynos4210_write_secondary(ARMCPU *cpu, * bit - bit number inside group */ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit); -/* - * Get Combiner input GPIO into irqs structure - */ -void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, - int ext); - /* * exynos4210 UART */ diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { { }, { }, { }, { }, { }, { }, { }, { }, { }, { } }; +#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp) * 8 + (bit)) +#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) +#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ + ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) + /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. @@ -XXX,XX +XXX,XX @@ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); } +/* + * Get Combiner input GPIO into irqs structure + */ +static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, + DeviceState *dev, int ext) +{ + int n; + int bit; + int max; + qemu_irq *irq; + + max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : + EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; + irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; + + /* + * Some IRQs of Int/External Combiner are going to two Combiners groups, + * so let split them. + */ + for (n = 0; n < max; n++) { + + bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); + + switch (n) { + /* MDNIE_LCD1 INTG1 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); + continue; + + /* TMU INTG3 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); + continue; + + /* LCD1 INTG12 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); + continue; + + /* Multi-Core Timer INTG12 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG35 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG51 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + + /* Multi-Core Timer INTG53 */ + case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... + EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): + irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), + irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); + continue; + } + + irq[n] = qdev_get_gpio_in(dev, n); + } +} + static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; diff --git a/hw/intc/exynos4210_combiner.c b/hw/intc/exynos4210_combiner.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_combiner.c +++ b/hw/intc/exynos4210_combiner.c @@ -XXX,XX +XXX,XX @@ static const VMStateDescription vmstate_exynos4210_combiner = { } }; -/* - * Get Combiner input GPIO into irqs structure - */ -void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, - int ext) -{ - int n; - int bit; - int max; - qemu_irq *irq; - - max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; - irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - - /* - * Some IRQs of Int/External Combiner are going to two Combiners groups, - * so let split them. - */ - for (n = 0; n < max; n++) { - - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - - switch (n) { - /* MDNIE_LCD1 INTG1 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); - continue; - - /* TMU INTG3 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); - continue; - - /* LCD1 INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); - continue; - - /* Multi-Core Timer INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG35 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG51 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG53 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - } - - irq[n] = qdev_get_gpio_in(dev, n); - } -} - static uint64_t exynos4210_combiner_read(void *opaque, hwaddr offset, unsigned size) { -- 2.25.1 Delete a couple of #defines which are never used. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-12-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \ (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8) -/* IRQs number for external and internal GIC */ -#define EXYNOS4210_EXT_GIC_NIRQ (160-32) -#define EXYNOS4210_INT_GIC_NIRQ 64 - #define EXYNOS4210_I2C_NUMBER 9 #define EXYNOS4210_NUM_DMA 3 -- 2.25.1 In exynos4210_init_board_irqs(), use the TYPE_SPLIT_IRQ device instead of qemu_irq_split(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-13-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 9 ++++++++ hw/arm/exynos4210.c | 41 +++++++++++++++++++++++++++++-------- 2 files changed, 42 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" #include "hw/intc/exynos4210_gic.h" +#include "hw/core/split-irq.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ #define EXYNOS4210_NUM_DMA 3 +/* + * We need one splitter for every external combiner input, plus + * one for every non-zero entry in combiner_grp_to_gic_id[]. + * We'll assert in exynos4210_init_board_irqs() if this is wrong. + */ +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 60) + typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; Exynos4210GicState ext_gic; + SplitIRQ splitter[EXYNOS4210_NUM_SPLITTERS]; }; #define TYPE_EXYNOS4210_SOC "exynos4210" diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) uint32_t grp, bit, irq_id, n; Exynos4210Irq *is = &s->irqs; DeviceState *extgicdev = DEVICE(&s->ext_gic); + int splitcount = 0; + DeviceState *splitter; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) /* MCT_G1 is passed to External and GIC */ irq_id = EXT_GIC_ID_MCT_G1; } + + assert(splitcount < EXYNOS4210_NUM_SPLITTERS); + splitter = DEVICE(&s->splitter[splitcount]); + qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_realize(splitter, NULL, &error_abort); + splitcount++; + s->irq_table[n] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - qdev_get_gpio_in(extgicdev, - irq_id - 32)); + qdev_connect_gpio_out(splitter, 1, + qdev_get_gpio_in(extgicdev, irq_id - 32)); } else { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - is->ext_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; if (irq_id) { - s->irq_table[n] = qemu_irq_split(is->int_combiner_irq[n], - qdev_get_gpio_in(extgicdev, - irq_id - 32)); + assert(splitcount < EXYNOS4210_NUM_SPLITTERS); + splitter = DEVICE(&s->splitter[splitcount]); + qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_realize(splitter, NULL, &error_abort); + splitcount++; + s->irq_table[n] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, + qdev_get_gpio_in(extgicdev, irq_id - 32)); } } + /* + * We check this here to avoid a more obscure assert later when + * qdev_assert_realized_properly() checks that we realized every + * child object we initialized. + */ + assert(splitcount == EXYNOS4210_NUM_SPLITTERS); } /* @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, name, &s->cpu_irq_orgate[i], TYPE_OR_IRQ); } + for (i = 0; i < ARRAY_SIZE(s->splitter); i++) { + g_autofree char *name = g_strdup_printf("irq-splitter%d", i); + object_initialize_child(obj, name, &s->splitter[i], TYPE_SPLIT_IRQ); + } + object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); } -- 2.25.1 In exynos4210_init_board_irqs(), the loop that handles IRQ lines that are in a range that applies to the internal combiner only creates a splitter for those interrupts which go to both the internal combiner and to the external GIC, but it does nothing at all for the interrupts which don't go to the external GIC, leaving the irq_table[] array element empty for those. (This will result in those interrupts simply being lost, not in a QEMU crash.) I don't have a reliable datasheet for this SoC, but since we do wire up one interrupt line in this category (the HDMI I2C device on interrupt 16,1), this seems like it must be a bug in the existing QEMU code. Fill in the irq_table[] entries where we're not splitting the IRQ to both the internal combiner and the external GIC with the IRQ line of the internal combiner. (That is, these IRQ lines go to just one device, not multiple.) This bug didn't have any visible guest effects because the only implemented device that was affected was the HDMI I2C controller, and we never connect any I2C devices to that bus. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-14-peter.maydell@linaro.org --- hw/arm/exynos4210.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); qdev_connect_gpio_out(splitter, 1, qdev_get_gpio_in(extgicdev, irq_id - 32)); + } else { + s->irq_table[n] = is->int_combiner_irq[n]; } } /* -- 2.25.1 Currently for the interrupts MCT_G0 and MCT_G1 which are the only ones in the input range of the external combiner and which are also wired to the external GIC, we connect them only to the internal combiner and the external GIC. This seems likely to be a bug, as all other interrupts which are in the input range of both combiners are connected to both combiners. (The fact that the code in exynos4210_combiner_get_gpioin() is also trying to wire up these inputs on both combiners also suggests this.) Wire these interrupts up to both combiners, like the rest. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-15-peter.maydell@linaro.org --- hw/arm/exynos4210.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); - qdev_prop_set_uint16(splitter, "num-lines", 2); + qdev_prop_set_uint16(splitter, "num-lines", irq_id ? 3 : 2); qdev_realize(splitter, NULL, &error_abort); splitcount++; s->irq_table[n] = qdev_get_gpio_in(splitter, 0); qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); if (irq_id) { - qdev_connect_gpio_out(splitter, 1, + qdev_connect_gpio_out(splitter, 2, qdev_get_gpio_in(extgicdev, irq_id - 32)); - } else { - qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); } } for (; n < EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; n++) { -- 2.25.1 The combiner_grp_to_gic_id[] array includes the EXT_GIC_ID_MCT_G0 and EXT_GIC_ID_MCT_G1 multiple times. This means that we will connect multiple IRQs up to the same external GIC input, which is not permitted. We do the same thing in the code in exynos4210_init_board_irqs() because the conditionals selecting an irq_id in the first loop match multiple interrupt IDs. Overall we do this for interrupt IDs (1, 4), (12, 4), (35, 4), (51, 4), (53, 4) for EXT_GIC_ID_MCT_G0 and (1, 5), (12, 5), (35, 5), (51, 5), (53, 5) for EXT_GIC_ID_MCT_G1 These correspond to the cases for the multi-core timer that we are wiring up to multiple inputs on the combiner in exynos4210_combiner_get_gpioin(). That code already deals with all these interrupt IDs being the same input source, so we don't need to connect the external GIC interrupt for any of them except the first (1, 4) and (1, 5). Remove the array entries and conditionals which were incorrectly causing us to wire up extra lines. This bug didn't cause any visible effects, because we only connect up a device to the "primary" ID values (1, 4) and (1, 5), so the extra lines would never be set to a level. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-16-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 2 +- hw/arm/exynos4210.c | 12 +++++------- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ * one for every non-zero entry in combiner_grp_to_gic_id[]. * We'll assert in exynos4210_init_board_irqs() if this is wrong. */ -#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 60) +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 54) typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* int combiner group 34 */ { EXT_GIC_ID_ONENAND_AUDI, EXT_GIC_ID_NFC }, /* int combiner group 35 */ - { 0, 0, 0, EXT_GIC_ID_MCT_L1, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { 0, 0, 0, EXT_GIC_ID_MCT_L1 }, /* int combiner group 36 */ { EXT_GIC_ID_MIXER }, /* int combiner group 37 */ @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { /* groups 38-50 */ { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, { }, /* int combiner group 51 */ - { EXT_GIC_ID_MCT_L0, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { EXT_GIC_ID_MCT_L0 }, /* group 52 */ { }, /* int combiner group 53 */ - { EXT_GIC_ID_WDT, 0, 0, 0, EXT_GIC_ID_MCT_G0, EXT_GIC_ID_MCT_G1 }, + { EXT_GIC_ID_WDT }, /* groups 54-63 */ { }, { }, { }, { }, { }, { }, { }, { }, { }, { } }; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4)) { + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 4)) { /* MCT_G0 is passed to External GIC */ irq_id = EXT_GIC_ID_MCT_G0; } - if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5) || - n == EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 5)) { + if (n == EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 5)) { /* MCT_G1 is passed to External and GIC */ irq_id = EXT_GIC_ID_MCT_G1; } -- 2.25.1 At this point, the function exynos4210_init_board_irqs() splits input IRQ lines to connect them to the input combiner, output combiner and external GIC. The function exynos4210_combiner_get_gpioin() splits some of the combiner input lines further to connect them to multiple different inputs on the combiner. Because (unlike qemu_irq_split()) the TYPE_SPLIT_IRQ device has a configurable number of outputs, we can do all this in one place, by making exynos4210_init_board_irqs() add extra outputs to the splitter device when it must be connected to more than one input on each combiner. We do this with a new data structure, the combinermap, which is an array each of whose elements is a list of the interrupt IDs on the combiner which must be tied together. As we loop through each interrupt ID, if we find that it is the first one in one of these lists, we configure the splitter device with eonugh extra outputs and wire them up to the other interrupt IDs in the list. Conveniently, for all the cases where this is necessary, the lowest-numbered interrupt ID in each group is in the range of the external combiner, so we only need to code for this in the first of the two loops in exynos4210_init_board_irqs(). The old code in exynos4210_combiner_get_gpioin() which is being deleted here had several problems which don't exist in the new code in its handling of the multi-core timer interrupts: (1) the case labels specified bits 4 ... 8, but bit '8' doesn't exist; these should have been 4 ... 7 (2) it used the input irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)] multiple times as the input of several different splitters, which isn't allowed (3) in an apparent cut-and-paste error, the cases for all the multi-core timer inputs used "bit + 4" even though the bit range for the case was (intended to be) 4 ... 7, which meant it was looking at non-existent bits 8 ... 11. None of these exist in the new code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-17-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 6 +- hw/arm/exynos4210.c | 178 +++++++++++++++++++++++------------- 2 files changed, 119 insertions(+), 65 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ /* * We need one splitter for every external combiner input, plus - * one for every non-zero entry in combiner_grp_to_gic_id[]. + * one for every non-zero entry in combiner_grp_to_gic_id[], + * minus one for every external combiner ID in second or later + * places in a combinermap[] line. * We'll assert in exynos4210_init_board_irqs() if this is wrong. */ -#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 54) +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 38) typedef struct Exynos4210Irq { qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ combiner_grp_to_gic_id[64 - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][8] = { #define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) +/* + * Some interrupt lines go to multiple combiner inputs. + * This data structure defines those: each array element is + * a list of combiner inputs which are connected together; + * the one with the smallest interrupt ID value must be first. + * As with combiner_grp_to_gic_id[], we rely on (0, 0) not being + * wired to anything so we can use 0 as a terminator. + */ +#define IRQNO(G, B) EXYNOS4210_COMBINER_GET_IRQ_NUM(G, B) +#define IRQNONE 0 + +#define COMBINERMAP_SIZE 16 + +static const int combinermap[COMBINERMAP_SIZE][6] = { + /* MDNIE_LCD1 */ + { IRQNO(0, 4), IRQNO(1, 0), IRQNONE }, + { IRQNO(0, 5), IRQNO(1, 1), IRQNONE }, + { IRQNO(0, 6), IRQNO(1, 2), IRQNONE }, + { IRQNO(0, 7), IRQNO(1, 3), IRQNONE }, + /* TMU */ + { IRQNO(2, 4), IRQNO(3, 4), IRQNONE }, + { IRQNO(2, 5), IRQNO(3, 5), IRQNONE }, + { IRQNO(2, 6), IRQNO(3, 6), IRQNONE }, + { IRQNO(2, 7), IRQNO(3, 7), IRQNONE }, + /* LCD1 */ + { IRQNO(11, 4), IRQNO(12, 0), IRQNONE }, + { IRQNO(11, 5), IRQNO(12, 1), IRQNONE }, + { IRQNO(11, 6), IRQNO(12, 2), IRQNONE }, + { IRQNO(11, 7), IRQNO(12, 3), IRQNONE }, + /* Multi-core timer */ + { IRQNO(1, 4), IRQNO(12, 4), IRQNO(35, 4), IRQNO(51, 4), IRQNO(53, 4), IRQNONE }, + { IRQNO(1, 5), IRQNO(12, 5), IRQNO(35, 5), IRQNO(51, 5), IRQNO(53, 5), IRQNONE }, + { IRQNO(1, 6), IRQNO(12, 6), IRQNO(35, 6), IRQNO(51, 6), IRQNO(53, 6), IRQNONE }, + { IRQNO(1, 7), IRQNO(12, 7), IRQNO(35, 7), IRQNO(51, 7), IRQNO(53, 7), IRQNONE }, +}; + +#undef IRQNO + +static const int *combinermap_entry(int irq) +{ + /* + * If the interrupt number passed in is the first entry in some + * line of the combinermap, return a pointer to that line; + * otherwise return NULL. + */ + int i; + for (i = 0; i < COMBINERMAP_SIZE; i++) { + if (combinermap[i][0] == irq) { + return combinermap[i]; + } + } + return NULL; +} + +static int mapline_size(const int *mapline) +{ + /* Return number of entries in this mapline in total */ + int i = 0; + + if (!mapline) { + /* Not in the map? IRQ goes to exactly one combiner input */ + return 1; + } + while (*mapline != IRQNONE) { + mapline++; + i++; + } + return i; +} + /* * Initialize board IRQs. * These IRQs contain splitted Int/External Combiner and External Gic IRQs. @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) DeviceState *extgicdev = DEVICE(&s->ext_gic); int splitcount = 0; DeviceState *splitter; + const int *mapline; + int numlines, splitin, in; for (n = 0; n < EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ; n++) { irq_id = 0; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) irq_id = EXT_GIC_ID_MCT_G1; } + if (s->irq_table[n]) { + /* + * This must be some non-first entry in a combinermap line, + * and we've already filled it in. + */ + continue; + } + mapline = combinermap_entry(n); + /* + * We need to connect the IRQ to multiple inputs on both combiners + * and possibly also to the external GIC. + */ + numlines = 2 * mapline_size(mapline); + if (irq_id) { + numlines++; + } assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); - qdev_prop_set_uint16(splitter, "num-lines", irq_id ? 3 : 2); + qdev_prop_set_uint16(splitter, "num-lines", numlines); qdev_realize(splitter, NULL, &error_abort); splitcount++; - s->irq_table[n] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); - qdev_connect_gpio_out(splitter, 1, is->ext_combiner_irq[n]); + + in = n; + splitin = 0; + for (;;) { + s->irq_table[in] = qdev_get_gpio_in(splitter, 0); + qdev_connect_gpio_out(splitter, splitin, is->int_combiner_irq[in]); + qdev_connect_gpio_out(splitter, splitin + 1, is->ext_combiner_irq[in]); + splitin += 2; + if (!mapline) { + break; + } + mapline++; + in = *mapline; + if (in == IRQNONE) { + break; + } + } if (irq_id) { - qdev_connect_gpio_out(splitter, 2, + qdev_connect_gpio_out(splitter, splitin, qdev_get_gpio_in(extgicdev, irq_id - 32)); } } @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) irq_id = combiner_grp_to_gic_id[grp - EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ][bit]; + if (s->irq_table[n]) { + /* + * This must be some non-first entry in a combinermap line, + * and we've already filled it in. + */ + continue; + } + if (irq_id) { assert(splitcount < EXYNOS4210_NUM_SPLITTERS); splitter = DEVICE(&s->splitter[splitcount]); @@ -XXX,XX +XXX,XX @@ static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, int ext) { int n; - int bit; int max; qemu_irq *irq; @@ -XXX,XX +XXX,XX @@ static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - /* - * Some IRQs of Int/External Combiner are going to two Combiners groups, - * so let split them. - */ for (n = 0; n < max; n++) { - - bit = EXYNOS4210_COMBINER_GET_BIT_NUM(n); - - switch (n) { - /* MDNIE_LCD1 INTG1 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(1, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(0, bit + 4)]); - continue; - - /* TMU INTG3 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(3, 4): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(2, bit)]); - continue; - - /* LCD1 INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 0) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 3): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(11, bit + 4)]); - continue; - - /* Multi-Core Timer INTG12 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(12, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG35 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(35, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG51 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(51, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - - /* Multi-Core Timer INTG53 */ - case EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 4) ... - EXYNOS4210_COMBINER_GET_IRQ_NUM(53, 8): - irq[n] = qemu_irq_split(qdev_get_gpio_in(dev, n), - irq[EXYNOS4210_COMBINER_GET_IRQ_NUM(1, bit + 4)]); - continue; - } - irq[n] = qdev_get_gpio_in(dev, n); } } -- 2.25.1 Switch the creation of the combiner devices to the new-style "embedded in state struct" approach, so we can easily refer to the object elsewhere during realize. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-18-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 3 ++ include/hw/intc/exynos4210_combiner.h | 57 +++++++++++++++++++++++++++ hw/arm/exynos4210.c | 20 +++++----- hw/intc/exynos4210_combiner.c | 31 +-------------- 4 files changed, 72 insertions(+), 39 deletions(-) create mode 100644 include/hw/intc/exynos4210_combiner.h diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/cpu/a9mpcore.h" #include "hw/intc/exynos4210_gic.h" +#include "hw/intc/exynos4210_combiner.h" #include "hw/core/split-irq.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -XXX,XX +XXX,XX @@ struct Exynos4210State { qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; A9MPPrivState a9mpcore; Exynos4210GicState ext_gic; + Exynos4210CombinerState int_combiner; + Exynos4210CombinerState ext_combiner; SplitIRQ splitter[EXYNOS4210_NUM_SPLITTERS]; }; diff --git a/include/hw/intc/exynos4210_combiner.h b/include/hw/intc/exynos4210_combiner.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/intc/exynos4210_combiner.h @@ -XXX,XX +XXX,XX @@ +/* + * Samsung exynos4210 Interrupt Combiner + * + * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. + * All rights reserved. + * + * Evgeny Voevodin <e.voevodin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_INTC_EXYNOS4210_COMBINER +#define HW_INTC_EXYNOS4210_COMBINER + +#include "hw/sysbus.h" + +/* + * State for each output signal of internal combiner + */ +typedef struct CombinerGroupState { + uint8_t src_mask; /* 1 - source enabled, 0 - disabled */ + uint8_t src_pending; /* Pending source interrupts before masking */ +} CombinerGroupState; + +#define TYPE_EXYNOS4210_COMBINER "exynos4210.combiner" +OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210CombinerState, EXYNOS4210_COMBINER) + +/* Number of groups and total number of interrupts for the internal combiner */ +#define IIC_NGRP 64 +#define IIC_NIRQ (IIC_NGRP * 8) +#define IIC_REGSET_SIZE 0x41 + +struct Exynos4210CombinerState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + struct CombinerGroupState group[IIC_NGRP]; + uint32_t reg_set[IIC_REGSET_SIZE]; + uint32_t icipsr[2]; + uint32_t external; /* 1 means that this combiner is external */ + + qemu_irq output_irq[IIC_NGRP]; +}; + +#endif diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) } /* Internal Interrupt Combiner */ - dev = qdev_new("exynos4210.combiner"); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + busdev = SYS_BUS_DEVICE(&s->int_combiner); + sysbus_realize(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, dev, 0); + exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->int_combiner), 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); /* External Interrupt Combiner */ - dev = qdev_new("exynos4210.combiner"); - qdev_prop_set_uint32(dev, "external", 1); - busdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(busdev, &error_fatal); + qdev_prop_set_uint32(DEVICE(&s->ext_combiner), "external", 1); + busdev = SYS_BUS_DEVICE(&s->ext_combiner); + sysbus_realize(busdev, &error_fatal); for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, dev, 1); + exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->ext_combiner), 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_init(Object *obj) object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); object_initialize_child(obj, "ext-gic", &s->ext_gic, TYPE_EXYNOS4210_GIC); + object_initialize_child(obj, "int-combiner", &s->int_combiner, + TYPE_EXYNOS4210_COMBINER); + object_initialize_child(obj, "ext-combiner", &s->ext_combiner, + TYPE_EXYNOS4210_COMBINER); } static void exynos4210_class_init(ObjectClass *klass, void *data) diff --git a/hw/intc/exynos4210_combiner.c b/hw/intc/exynos4210_combiner.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/exynos4210_combiner.c +++ b/hw/intc/exynos4210_combiner.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "migration/vmstate.h" #include "qemu/module.h" - +#include "hw/intc/exynos4210_combiner.h" #include "hw/arm/exynos4210.h" #include "hw/hw.h" #include "hw/irq.h" @@ -XXX,XX +XXX,XX @@ #define DPRINTF(fmt, ...) do {} while (0) #endif -#define IIC_NGRP 64 /* Internal Interrupt Combiner - Groups number */ -#define IIC_NIRQ (IIC_NGRP * 8)/* Internal Interrupt Combiner - Interrupts number */ #define IIC_REGION_SIZE 0x108 /* Size of memory mapped region */ -#define IIC_REGSET_SIZE 0x41 - -/* - * State for each output signal of internal combiner - */ -typedef struct CombinerGroupState { - uint8_t src_mask; /* 1 - source enabled, 0 - disabled */ - uint8_t src_pending; /* Pending source interrupts before masking */ -} CombinerGroupState; - -#define TYPE_EXYNOS4210_COMBINER "exynos4210.combiner" -OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210CombinerState, EXYNOS4210_COMBINER) - -struct Exynos4210CombinerState { - SysBusDevice parent_obj; - - MemoryRegion iomem; - - struct CombinerGroupState group[IIC_NGRP]; - uint32_t reg_set[IIC_REGSET_SIZE]; - uint32_t icipsr[2]; - uint32_t external; /* 1 means that this combiner is external */ - - qemu_irq output_irq[IIC_NGRP]; -}; static const VMStateDescription vmstate_exynos4210_combiner_group_state = { .name = "exynos4210.combiner.groupstate", -- 2.25.1 The only time we use the int_combiner_irq[] and ext_combiner_irq[] arrays in the Exynos4210Irq struct is during realize of the SoC -- we initialize them with the input IRQs of the combiner devices, and then connect those to outputs of other devices in exynos4210_init_board_irqs(). Now that the combiner objects are easily accessible as s->int_combiner and s->ext_combiner we can make the connections directly from one device to the other without going via these arrays. Since these are the only two remaining elements of Exynos4210Irq, we can remove that struct entirely. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20220404154658.565020-19-peter.maydell@linaro.org --- include/hw/arm/exynos4210.h | 6 ------ hw/arm/exynos4210.c | 34 ++++++++-------------------------- 2 files changed, 8 insertions(+), 32 deletions(-) diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -XXX,XX +XXX,XX @@ */ #define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 38) -typedef struct Exynos4210Irq { - qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; - qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; -} Exynos4210Irq; - struct Exynos4210State { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ ARMCPU *cpu[EXYNOS4210_NCPUS]; - Exynos4210Irq irqs; qemu_irq irq_table[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; MemoryRegion chipid_mem; diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -XXX,XX +XXX,XX @@ static int mapline_size(const int *mapline) static void exynos4210_init_board_irqs(Exynos4210State *s) { uint32_t grp, bit, irq_id, n; - Exynos4210Irq *is = &s->irqs; DeviceState *extgicdev = DEVICE(&s->ext_gic); + DeviceState *intcdev = DEVICE(&s->int_combiner); + DeviceState *extcdev = DEVICE(&s->ext_combiner); int splitcount = 0; DeviceState *splitter; const int *mapline; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) splitin = 0; for (;;) { s->irq_table[in] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, splitin, is->int_combiner_irq[in]); - qdev_connect_gpio_out(splitter, splitin + 1, is->ext_combiner_irq[in]); + qdev_connect_gpio_out(splitter, splitin, + qdev_get_gpio_in(intcdev, in)); + qdev_connect_gpio_out(splitter, splitin + 1, + qdev_get_gpio_in(extcdev, in)); splitin += 2; if (!mapline) { break; @@ -XXX,XX +XXX,XX @@ static void exynos4210_init_board_irqs(Exynos4210State *s) qdev_realize(splitter, NULL, &error_abort); splitcount++; s->irq_table[n] = qdev_get_gpio_in(splitter, 0); - qdev_connect_gpio_out(splitter, 0, is->int_combiner_irq[n]); + qdev_connect_gpio_out(splitter, 0, qdev_get_gpio_in(intcdev, n)); qdev_connect_gpio_out(splitter, 1, qdev_get_gpio_in(extgicdev, irq_id - 32)); } else { - s->irq_table[n] = is->int_combiner_irq[n]; + s->irq_table[n] = qdev_get_gpio_in(intcdev, n); } } /* @@ -XXX,XX +XXX,XX @@ uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit) return EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit); } -/* - * Get Combiner input GPIO into irqs structure - */ -static void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, - DeviceState *dev, int ext) -{ - int n; - int max; - qemu_irq *irq; - - max = ext ? EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ : - EXYNOS4210_MAX_INT_COMBINER_IN_IRQ; - irq = ext ? irqs->ext_combiner_irq : irqs->int_combiner_irq; - - for (n = 0; n < max; n++) { - irq[n] = qdev_get_gpio_in(dev, n); - } -} - static uint8_t chipid_and_omr[] = { 0x11, 0x02, 0x21, 0x43, 0x09, 0x00, 0x00, 0x00 }; @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->a9mpcore), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->int_combiner), 0); sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR); /* External Interrupt Combiner */ @@ -XXX,XX +XXX,XX @@ static void exynos4210_realize(DeviceState *socdev, Error **errp) for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) { sysbus_connect_irq(busdev, n, qdev_get_gpio_in(DEVICE(&s->ext_gic), n)); } - exynos4210_combiner_get_gpioin(&s->irqs, DEVICE(&s->ext_combiner), 1); sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR); /* Initialize board IRQs. */ -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-2-zongyuan.li@smartx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/realview.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/hw/arm/realview.c b/hw/arm/realview.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -XXX,XX +XXX,XX @@ #include "hw/sysbus.h" #include "hw/arm/boot.h" #include "hw/arm/primecell.h" +#include "hw/core/split-irq.h" #include "hw/net/lan9118.h" #include "hw/net/smc91c111.h" #include "hw/pci/pci.h" +#include "hw/qdev-core.h" #include "net/net.h" #include "sysemu/sysemu.h" #include "hw/boards.h" @@ -XXX,XX +XXX,XX @@ static const int realview_board_id[] = { 0x76d }; +static void split_irq_from_named(DeviceState *src, const char* outname, + qemu_irq out1, qemu_irq out2) { + DeviceState *splitter = qdev_new(TYPE_SPLIT_IRQ); + + qdev_prop_set_uint32(splitter, "num-lines", 2); + + qdev_realize_and_unref(splitter, NULL, &error_fatal); + + qdev_connect_gpio_out(splitter, 0, out1); + qdev_connect_gpio_out(splitter, 1, out2); + qdev_connect_gpio_out_named(src, outname, 0, + qdev_get_gpio_in(splitter, 0)); +} + static void realview_init(MachineState *machine, enum realview_board_type board_type) { @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, DeviceState *dev, *sysctl, *gpio2, *pl041; SysBusDevice *busdev; qemu_irq pic[64]; - qemu_irq mmc_irq[2]; PCIBus *pci_bus = NULL; NICInfo *nd; DriveInfo *dinfo; @@ -XXX,XX +XXX,XX @@ static void realview_init(MachineState *machine, * and the PL061 has them the other way about. Also the card * detect line is inverted. */ - mmc_irq[0] = qemu_irq_split( - qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), - qdev_get_gpio_in(gpio2, 1)); - mmc_irq[1] = qemu_irq_split( - qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), - qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); - qdev_connect_gpio_out_named(dev, "card-read-only", 0, mmc_irq[0]); - qdev_connect_gpio_out_named(dev, "card-inserted", 0, mmc_irq[1]); + split_irq_from_named(dev, "card-read-only", + qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT), + qdev_get_gpio_in(gpio2, 1)); + + split_irq_from_named(dev, "card-inserted", + qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN), + qemu_irq_invert(qdev_get_gpio_in(gpio2, 0))); + dinfo = drive_get(IF_SD, 0, 0); if (dinfo) { DeviceState *card; -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-3-zongyuan.li@smartx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/stellaris.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/stellaris.c +++ b/hw/arm/stellaris.c @@ -XXX,XX +XXX,XX @@ #include "qemu/osdep.h" #include "qapi/error.h" +#include "hw/core/split-irq.h" #include "hw/sysbus.h" #include "hw/sd/sd.h" #include "hw/ssi/ssi.h" @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) DeviceState *ssddev; DriveInfo *dinfo; DeviceState *carddev; + DeviceState *gpio_d_splitter; BlockBackend *blk; /* @@ -XXX,XX +XXX,XX @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board) &error_fatal); ssddev = ssi_create_peripheral(bus, "ssd0323"); - gpio_out[GPIO_D][0] = qemu_irq_split( - qdev_get_gpio_in_named(sddev, SSI_GPIO_CS, 0), + + gpio_d_splitter = qdev_new(TYPE_SPLIT_IRQ); + qdev_prop_set_uint32(gpio_d_splitter, "num-lines", 2); + qdev_realize_and_unref(gpio_d_splitter, NULL, &error_fatal); + qdev_connect_gpio_out( + gpio_d_splitter, 0, + qdev_get_gpio_in_named(sddev, SSI_GPIO_CS, 0)); + qdev_connect_gpio_out( + gpio_d_splitter, 1, qdev_get_gpio_in_named(ssddev, SSI_GPIO_CS, 0)); + gpio_out[GPIO_D][0] = qdev_get_gpio_in(gpio_d_splitter, 0); + gpio_out[GPIO_C][7] = qdev_get_gpio_in(ssddev, 0); /* Make sure the select pin is high. */ -- 2.25.1 From: Zongyuan Li <zongyuan.li@smartx.com> Signed-off-by: Zongyuan Li <zongyuan.li@smartx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20220324181557.203805-5-zongyuan.li@smartx.com Resolves: https://gitlab.com/qemu-project/qemu/-/issues/811 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/irq.h | 5 ----- hw/core/irq.c | 15 --------------- 2 files changed, 20 deletions(-) diff --git a/include/hw/irq.h b/include/hw/irq.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -XXX,XX +XXX,XX @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs. - * It's probably better to use the TYPE_SPLIT_IRQ device instead. - */ -qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); - /* For internal use in qtest. Similar to qemu_irq_split, but operating on an existing vector of qemu_irq. */ void qemu_irq_intercept_in(qemu_irq *gpio_in, qemu_irq_handler handler, int n); diff --git a/hw/core/irq.c b/hw/core/irq.c index XXXXXXX..XXXXXXX 100644 --- a/hw/core/irq.c +++ b/hw/core/irq.c @@ -XXX,XX +XXX,XX @@ qemu_irq qemu_irq_invert(qemu_irq irq) return qemu_allocate_irq(qemu_notirq, irq, 0); } -static void qemu_splitirq(void *opaque, int line, int level) -{ - struct IRQState **irq = opaque; - irq[0]->handler(irq[0]->opaque, irq[0]->n, level); - irq[1]->handler(irq[1]->opaque, irq[1]->n, level); -} - -qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2) -{ - qemu_irq *s = g_new0(qemu_irq, 2); - s[0] = irq1; - s[1] = irq2; - return qemu_allocate_irq(qemu_splitirq, s, 0); -} - void qemu_irq_intercept_in(qemu_irq *gpio_in, qemu_irq_handler handler, int n) { int i; -- 2.25.1 From: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Describe that the gic-version influences the maximum number of CPUs. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Message-id: 20220413231456.35811-1-heinrich.schuchardt@canonical.com [PMM: minor punctuation tweaks] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/virt.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/virt.rst b/docs/system/arm/virt.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/virt.rst +++ b/docs/system/arm/virt.rst @@ -XXX,XX +XXX,XX @@ gic-version Valid values are: ``2`` - GICv2 + GICv2. Note that this limits the number of CPUs to 8. ``3`` - GICv3 + GICv3. This allows up to 512 CPUs. ``host`` Use the same GIC version the host provides, when using KVM ``max`` -- 2.25.1 From: Hao Wu <wuhaotsh@google.com> Similar to the Aspeed code in include/misc/aspeed_scu.h, we define the PWRON STRAP fields in their corresponding module for NPCM7XX. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20220411165842.3912945-2-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/misc/npcm7xx_gcr.h | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "hw/sysbus.h" +/* + * NPCM7XX PWRON STRAP bit fields + * 12: SPI0 powered by VSBV3 at 1.8V + * 11: System flash attached to BMC + * 10: BSP alternative pins. + * 9:8: Flash UART command route enabled. + * 7: Security enabled. + * 6: HI-Z state control. + * 5: ECC disabled. + * 4: Reserved + * 3: JTAG2 enabled. + * 2:0: CPU and DRAM clock frequency. + */ +#define NPCM7XX_PWRON_STRAP_SPI0F18 BIT(12) +#define NPCM7XX_PWRON_STRAP_SFAB BIT(11) +#define NPCM7XX_PWRON_STRAP_BSPA BIT(10) +#define NPCM7XX_PWRON_STRAP_FUP(x) ((x) << 8) +#define FUP_NORM_UART2 3 +#define FUP_PROG_UART3 2 +#define FUP_PROG_UART2 1 +#define FUP_NORM_UART3 0 +#define NPCM7XX_PWRON_STRAP_SECEN BIT(7) +#define NPCM7XX_PWRON_STRAP_HIZ BIT(6) +#define NPCM7XX_PWRON_STRAP_ECC BIT(5) +#define NPCM7XX_PWRON_STRAP_RESERVE1 BIT(4) +#define NPCM7XX_PWRON_STRAP_J2EN BIT(3) +#define NPCM7XX_PWRON_STRAP_CKFRQ(x) (x) +#define CKFRQ_SKIPINIT 0x000 +#define CKFRQ_DEFAULT 0x111 + /* * Number of registers in our device state structure. Don't change this without * incrementing the version_id in the vmstate. -- 2.25.1 From: Hao Wu <wuhaotsh@google.com> This patch uses the defined fields to describe PWRON STRAPs for better readability. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Patrick Venture <venture@google.com> Message-id: 20220411165842.3912945-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/npcm7xx_boards.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/npcm7xx_boards.c +++ b/hw/arm/npcm7xx_boards.c @@ -XXX,XX +XXX,XX @@ #include "sysemu/sysemu.h" #include "sysemu/block-backend.h" -#define NPCM750_EVB_POWER_ON_STRAPS 0x00001ff7 -#define QUANTA_GSJ_POWER_ON_STRAPS 0x00001fff -#define QUANTA_GBS_POWER_ON_STRAPS 0x000017ff -#define KUDO_BMC_POWER_ON_STRAPS 0x00001fff -#define MORI_BMC_POWER_ON_STRAPS 0x00001fff +#define NPCM7XX_POWER_ON_STRAPS_DEFAULT ( \ + NPCM7XX_PWRON_STRAP_SPI0F18 | \ + NPCM7XX_PWRON_STRAP_SFAB | \ + NPCM7XX_PWRON_STRAP_BSPA | \ + NPCM7XX_PWRON_STRAP_FUP(FUP_NORM_UART2) | \ + NPCM7XX_PWRON_STRAP_SECEN | \ + NPCM7XX_PWRON_STRAP_HIZ | \ + NPCM7XX_PWRON_STRAP_ECC | \ + NPCM7XX_PWRON_STRAP_RESERVE1 | \ + NPCM7XX_PWRON_STRAP_J2EN | \ + NPCM7XX_PWRON_STRAP_CKFRQ(CKFRQ_DEFAULT)) + +#define NPCM750_EVB_POWER_ON_STRAPS ( \ + NPCM7XX_POWER_ON_STRAPS_DEFAULT & ~NPCM7XX_PWRON_STRAP_J2EN) +#define QUANTA_GSJ_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT +#define QUANTA_GBS_POWER_ON_STRAPS ( \ + NPCM7XX_POWER_ON_STRAPS_DEFAULT & ~NPCM7XX_PWRON_STRAP_SFAB) +#define KUDO_BMC_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT +#define MORI_BMC_POWER_ON_STRAPS NPCM7XX_POWER_ON_STRAPS_DEFAULT static const char npcm7xx_default_bootrom[] = "npcm7xx_bootrom.bin"; -- 2.25.1