This small patchset fixes a couple of bugs in our ATS insn
handling:
 * for faults reported to the 64-bit PAR we were not
   setting the S and PTW bits to indicate stage 2
   fault information
   (NB: stage 2 faults aren't reported with 32-bit
   PAR formats so there's no need to change the 32-bit
   code path)
 * ATS1Hx were implementing the wrong thing (doing a
   stage 2 lookup rather than an EL2 stage 1 lookup)

The major missing bit of ATS at the moment is that a stage
2 fault during execution of an NS-EL1 ATS insn that asks
for a stage 1 lookup should cause a trap to EL2. I started
to sketch out some code to do that, but I realised by
putting an assert() in it that I didn't have any guests
that actually hit the problem, so put it on the back burner.
If anybody does hit that missing feature, feel free to send
me a test case :-)

Based-on: <20181012144235.19646-1-peter.maydell@linaro.org>
("[PATCH 00/10] target/arm: more HCR bits, improve syndrome reporting")
but only to avoid a textual conflict in the patch context.

thanks
-- PMM

Peter Maydell (2):
  target/arm: Set S and PTW in 64-bit PAR format
  target/arm: Fix ATS1Hx instructions

 target/arm/helper.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

-- 
2.19.0

Ping for code review, please?

thanks
-- PMM

On 16 October 2018 at 10:37, Peter Maydell <peter.maydell@linaro.org> wrote:
> This small patchset fixes a couple of bugs in our ATS insn
> handling:
>  * for faults reported to the 64-bit PAR we were not
>    setting the S and PTW bits to indicate stage 2
>    fault information
>    (NB: stage 2 faults aren't reported with 32-bit
>    PAR formats so there's no need to change the 32-bit
>    code path)
>  * ATS1Hx were implementing the wrong thing (doing a
>    stage 2 lookup rather than an EL2 stage 1 lookup)
>
> The major missing bit of ATS at the moment is that a stage
> 2 fault during execution of an NS-EL1 ATS insn that asks
> for a stage 1 lookup should cause a trap to EL2. I started
> to sketch out some code to do that, but I realised by
> putting an assert() in it that I didn't have any guests
> that actually hit the problem, so put it on the back burner.
> If anybody does hit that missing feature, feel free to send
> me a test case :-)
>
> Based-on: <20181012144235.19646-1-peter.maydell@linaro.org>
> ("[PATCH 00/10] target/arm: more HCR bits, improve syndrome reporting")
> but only to avoid a textual conflict in the patch context.
>
> thanks
> -- PMM
>
> Peter Maydell (2):
>   target/arm: Set S and PTW in 64-bit PAR format
>   target/arm: Fix ATS1Hx instructions
>
>  target/arm/helper.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)

Hi,

This series failed docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

Type: series
Message-id: 20181016093703.10637-1-peter.maydell@linaro.org
Subject: [Qemu-devel] [PATCH 0/2] target/arm: fix some ATS* bugs

=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=8
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
Switched to a new branch 'test'
7118b6bc32 target/arm: Fix ATS1Hx instructions
2e6d932650 target/arm: Set S and PTW in 64-bit PAR format

=== OUTPUT BEGIN ===
  BUILD   fedora
make[1]: Entering directory '/var/tmp/patchew-tester-tmp-j_cwgv70/src'
  GEN     /var/tmp/patchew-tester-tmp-j_cwgv70/src/docker-src.2018-11-06-04.49.59.28947/qemu.tar
Cloning into '/var/tmp/patchew-tester-tmp-j_cwgv70/src/docker-src.2018-11-06-04.49.59.28947/qemu.tar.vroot'...
done.
Your branch is up-to-date with 'origin/test'.
Submodule 'dtc' (git://git.qemu-project.org/dtc.git) registered for path 'dtc'
Cloning into '/var/tmp/patchew-tester-tmp-j_cwgv70/src/docker-src.2018-11-06-04.49.59.28947/qemu.tar.vroot/dtc'...
Submodule path 'dtc': checked out '88f18909db731a627456f26d779445f84e449536'
Submodule 'ui/keycodemapdb' (git://git.qemu.org/keycodemapdb.git) registered for path 'ui/keycodemapdb'
Cloning into '/var/tmp/patchew-tester-tmp-j_cwgv70/src/docker-src.2018-11-06-04.49.59.28947/qemu.tar.vroot/ui/keycodemapdb'...
Submodule path 'ui/keycodemapdb': checked out '6b3d716e2b6472eb7189d3220552280ef3d832ce'
  COPY    RUNNER
    RUN test-mingw in qemu:fedora 
Packages installed:
SDL2-devel-2.0.8-5.fc28.x86_64
bc-1.07.1-5.fc28.x86_64
bison-3.0.4-9.fc28.x86_64
bluez-libs-devel-5.50-1.fc28.x86_64
brlapi-devel-0.6.7-19.fc28.x86_64
bzip2-1.0.6-26.fc28.x86_64
bzip2-devel-1.0.6-26.fc28.x86_64
ccache-3.4.2-2.fc28.x86_64
clang-6.0.1-1.fc28.x86_64
device-mapper-multipath-devel-0.7.4-3.git07e7bd5.fc28.x86_64
findutils-4.6.0-19.fc28.x86_64
flex-2.6.1-7.fc28.x86_64
gcc-8.1.1-5.fc28.x86_64
gcc-c++-8.1.1-5.fc28.x86_64
gettext-0.19.8.1-14.fc28.x86_64
git-2.17.1-3.fc28.x86_64
glib2-devel-2.56.1-4.fc28.x86_64
glusterfs-api-devel-4.1.2-2.fc28.x86_64
gnutls-devel-3.6.3-3.fc28.x86_64
gtk3-devel-3.22.30-1.fc28.x86_64
hostname-3.20-3.fc28.x86_64
libaio-devel-0.3.110-11.fc28.x86_64
libasan-8.1.1-5.fc28.x86_64
libattr-devel-2.4.48-3.fc28.x86_64
libcap-devel-2.25-9.fc28.x86_64
libcap-ng-devel-0.7.9-4.fc28.x86_64
libcurl-devel-7.59.0-6.fc28.x86_64
libfdt-devel-1.4.6-5.fc28.x86_64
libpng-devel-1.6.34-6.fc28.x86_64
librbd-devel-12.2.7-1.fc28.x86_64
libssh2-devel-1.8.0-7.fc28.x86_64
libubsan-8.1.1-5.fc28.x86_64
libusbx-devel-1.0.22-1.fc28.x86_64
libxml2-devel-2.9.8-4.fc28.x86_64
llvm-6.0.1-6.fc28.x86_64
lzo-devel-2.08-12.fc28.x86_64
make-4.2.1-6.fc28.x86_64
mingw32-SDL2-2.0.5-3.fc27.noarch
mingw32-bzip2-1.0.6-9.fc27.noarch
mingw32-curl-7.57.0-1.fc28.noarch
mingw32-glib2-2.56.1-1.fc28.noarch
mingw32-gmp-6.1.2-2.fc27.noarch
mingw32-gnutls-3.6.2-1.fc28.noarch
mingw32-gtk3-3.22.30-1.fc28.noarch
mingw32-libjpeg-turbo-1.5.1-3.fc27.noarch
mingw32-libpng-1.6.29-2.fc27.noarch
mingw32-libssh2-1.8.0-3.fc27.noarch
mingw32-libtasn1-4.13-1.fc28.noarch
mingw32-nettle-3.4-1.fc28.noarch
mingw32-pixman-0.34.0-3.fc27.noarch
mingw32-pkg-config-0.28-9.fc27.x86_64
mingw64-SDL2-2.0.5-3.fc27.noarch
mingw64-bzip2-1.0.6-9.fc27.noarch
mingw64-curl-7.57.0-1.fc28.noarch
mingw64-glib2-2.56.1-1.fc28.noarch
mingw64-gmp-6.1.2-2.fc27.noarch
mingw64-gnutls-3.6.2-1.fc28.noarch
mingw64-gtk3-3.22.30-1.fc28.noarch
mingw64-libjpeg-turbo-1.5.1-3.fc27.noarch
mingw64-libpng-1.6.29-2.fc27.noarch
mingw64-libssh2-1.8.0-3.fc27.noarch
mingw64-libtasn1-4.13-1.fc28.noarch
mingw64-nettle-3.4-1.fc28.noarch
mingw64-pixman-0.34.0-3.fc27.noarch
mingw64-pkg-config-0.28-9.fc27.x86_64
ncurses-devel-6.1-5.20180224.fc28.x86_64
nettle-devel-3.4-2.fc28.x86_64
nss-devel-3.38.0-1.0.fc28.x86_64
numactl-devel-2.0.11-8.fc28.x86_64
package PyYAML is not installed
package libjpeg-devel is not installed
perl-5.26.2-413.fc28.x86_64
pixman-devel-0.34.0-8.fc28.x86_64
python3-3.6.5-1.fc28.x86_64
snappy-devel-1.1.7-5.fc28.x86_64
sparse-0.5.2-1.fc28.x86_64
spice-server-devel-0.14.0-4.fc28.x86_64
systemtap-sdt-devel-3.3-1.fc28.x86_64
tar-1.30-3.fc28.x86_64
usbredir-devel-0.8.0-1.fc28.x86_64
virglrenderer-devel-0.6.0-4.20170210git76b3da97b.fc28.x86_64
vte3-devel-0.36.5-6.fc28.x86_64
which-2.21-8.fc28.x86_64
xen-devel-4.10.1-5.fc28.x86_64
zlib-devel-1.2.11-8.fc28.x86_64

Environment variables:
TARGET_LIST=
PACKAGES=bc     bison     bluez-libs-devel     brlapi-devel     bzip2     bzip2-devel     ccache     clang     device-mapper-multipath-devel     findutils     flex     gcc     gcc-c++     gettext     git     glib2-devel     glusterfs-api-devel     gnutls-devel     gtk3-devel     hostname     libaio-devel     libasan     libattr-devel     libcap-devel     libcap-ng-devel     libcurl-devel     libfdt-devel     libjpeg-devel     libpng-devel     librbd-devel     libssh2-devel     libubsan     libusbx-devel     libxml2-devel     llvm     lzo-devel     make     mingw32-bzip2     mingw32-curl     mingw32-glib2     mingw32-gmp     mingw32-gnutls     mingw32-gtk3     mingw32-libjpeg-turbo     mingw32-libpng     mingw32-libssh2     mingw32-libtasn1     mingw32-nettle     mingw32-pixman     mingw32-pkg-config     mingw32-SDL2     mingw64-bzip2     mingw64-curl     mingw64-glib2     mingw64-gmp     mingw64-gnutls     mingw64-gtk3     mingw64-libjpeg-turbo     mingw64-libpng     mingw64-libssh2     mingw64-libtasn1     mingw64-nettle     mingw64-pixman     mingw64-pkg-config     mingw64-SDL2     ncurses-devel     nettle-devel     nss-devel     numactl-devel     perl     pixman-devel     python3     PyYAML     SDL2-devel     snappy-devel     sparse     spice-server-devel     systemtap-sdt-devel     tar     usbredir-devel     virglrenderer-devel     vte3-devel     which     xen-devel     zlib-devel
J=8
V=
HOSTNAME=581d9c168188
DEBUG=
SHOW_ENV=1
PWD=/
HOME=/home/patchew
CCACHE_DIR=/var/tmp/ccache
DISTTAG=f28container
QEMU_CONFIGURE_OPTS=--python=/usr/bin/python3
FGC=f28
TEST_DIR=/tmp/qemu-test
SHLVL=1
FEATURES=mingw clang pyyaml asan dtc
PATH=/usr/lib/ccache:/usr/lib64/ccache:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
MAKEFLAGS= -j8
EXTRA_CONFIGURE_OPTS=
_=/usr/bin/env

Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install --python=/usr/bin/python3 --cross-prefix=x86_64-w64-mingw32- --enable-trace-backends=simple --enable-gnutls --enable-nettle --enable-curl --enable-vnc --enable-bzip2 --enable-guest-agent --with-sdlabi=2.0 --with-gtkabi=3.0
ERROR: unknown option --with-gtkabi=3.0
Try '/tmp/qemu-test/src/configure --help' for more information
# QEMU configure log Tue Nov  6 09:50:16 UTC 2018
# Configured with: '/tmp/qemu-test/src/configure' '--enable-werror' '--target-list=x86_64-softmmu,aarch64-softmmu' '--prefix=/tmp/qemu-test/install' '--python=/usr/bin/python3' '--cross-prefix=x86_64-w64-mingw32-' '--enable-trace-backends=simple' '--enable-gnutls' '--enable-nettle' '--enable-curl' '--enable-vnc' '--enable-bzip2' '--enable-guest-agent' '--with-sdlabi=2.0' '--with-gtkabi=3.0'
#

funcs: do_compiler do_cc compile_object check_define main
lines: 92 119 608 625 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __linux__ not defined
 #error __linux__ not defined
  ^~~~~

funcs: do_compiler do_cc compile_object check_define main
lines: 92 119 608 627 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c

funcs: do_compiler do_cc compile_object check_define main
lines: 92 119 608 677 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __i386__ not defined
 #error __i386__ not defined
  ^~~~~

funcs: do_compiler do_cc compile_object check_define main
lines: 92 119 608 679 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c

funcs: do_compiler do_cc compile_object check_define main
lines: 92 119 608 680 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __ILP32__ not defined
 #error __ILP32__ not defined
  ^~~~~

funcs: do_compiler do_cc compile_object check_include main
lines: 92 119 616 771 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c

funcs: do_compiler do_cc compile_prog main
lines: 92 125 907 0
x86_64-w64-mingw32-gcc -mthreads -D__USE_MINGW_ANSI_STDIO=1 -DWIN32_LEAN_AND_MEAN -DWINVER=0x501 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -g -liberty
/usr/lib/gcc/x86_64-w64-mingw32/7.3.0/../../../../x86_64-w64-mingw32/bin/ld: cannot find -liberty
collect2: error: ld returned 1 exit status
Failed to run 'configure'
Traceback (most recent call last):
  File "./tests/docker/docker.py", line 563, in <module>
    sys.exit(main())
  File "./tests/docker/docker.py", line 560, in main
    return args.cmdobj.run(args, argv)
  File "./tests/docker/docker.py", line 306, in run
    return Docker().run(argv, args.keep, quiet=args.quiet)
  File "./tests/docker/docker.py", line 274, in run
    quiet=quiet)
  File "./tests/docker/docker.py", line 181, in _do_check
    return subprocess.check_call(self._command + cmd, **kwargs)
  File "/usr/lib64/python2.7/subprocess.py", line 186, in check_call
    raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=5bcf7f1ce1a911e88b3152540069c830', '-u', '1000', '--security-opt', 'seccomp=unconfined', '--rm', '--net=none', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=8', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-j_cwgv70/src/docker-src.2018-11-06-04.49.59.28947:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-mingw']' returned non-zero exit status 1
make[1]: *** [tests/docker/Makefile.include:217: docker-run] Error 1
make[1]: Leaving directory '/var/tmp/patchew-tester-tmp-j_cwgv70/src'
make: *** [tests/docker/Makefile.include:251: docker-run-test-mingw@fedora] Error 2

real	0m37.093s
user	0m5.048s
sys	0m3.799s
=== OUTPUT END ===

Test command exited with code: 2


---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com

On Tue, 11/06 01:50, no-reply@patchew.org wrote:
> ERROR: unknown option --with-gtkabi=3.0

Patchew is testing old series branches of which are heavily lagging behind. This
configure option in the mingw docker testing is recently dropped, so it's a
false positive.

Fam


> Try '/tmp/qemu-test/src/configure --help' for more information
> # QEMU configure log Tue Nov  6 09:50:16 UTC 2018
> # Configured with: '/tmp/qemu-test/src/configure' '--enable-werror' '--target-list=x86_64-softmmu,aarch64-softmmu' '--prefix=/tmp/qemu-test/install' '--python=/usr/bin/python3' '--cross-prefix=x86_64-w64-mingw32-' '--enable-trace-backends=simple' '--enable-gnutls' '--enable-nettle' '--enable-curl' '--enable-vnc' '--enable-bzip2' '--enable-guest-agent' '--with-sdlabi=2.0' '--with-gtkabi=3.0'
> #
> 
> funcs: do_compiler do_cc compile_object check_define main
> lines: 92 119 608 625 0
> x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
> config-temp/qemu-conf.c:2:2: error: #error __linux__ not defined
>  #error __linux__ not defined
>   ^~~~~
> 
> funcs: do_compiler do_cc compile_object check_define main
> lines: 92 119 608 627 0
> x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
> 
> funcs: do_compiler do_cc compile_object check_define main
> lines: 92 119 608 677 0
> x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
> config-temp/qemu-conf.c:2:2: error: #error __i386__ not defined
>  #error __i386__ not defined
>   ^~~~~
> 
> funcs: do_compiler do_cc compile_object check_define main
> lines: 92 119 608 679 0
> x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
> 
> funcs: do_compiler do_cc compile_object check_define main
> lines: 92 119 608 680 0
> x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
> config-temp/qemu-conf.c:2:2: error: #error __ILP32__ not defined
>  #error __ILP32__ not defined
>   ^~~~~
> 
> funcs: do_compiler do_cc compile_object check_include main
> lines: 92 119 616 771 0
> x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
> 
> funcs: do_compiler do_cc compile_prog main
> lines: 92 125 907 0
> x86_64-w64-mingw32-gcc -mthreads -D__USE_MINGW_ANSI_STDIO=1 -DWIN32_LEAN_AND_MEAN -DWINVER=0x501 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -g -liberty
> /usr/lib/gcc/x86_64-w64-mingw32/7.3.0/../../../../x86_64-w64-mingw32/bin/ld: cannot find -liberty
> collect2: error: ld returned 1 exit status
> Failed to run 'configure'
> Traceback (most recent call last):
>   File "./tests/docker/docker.py", line 563, in <module>
>     sys.exit(main())
>   File "./tests/docker/docker.py", line 560, in main
>     return args.cmdobj.run(args, argv)
>   File "./tests/docker/docker.py", line 306, in run
>     return Docker().run(argv, args.keep, quiet=args.quiet)
>   File "./tests/docker/docker.py", line 274, in run
>     quiet=quiet)
>   File "./tests/docker/docker.py", line 181, in _do_check
>     return subprocess.check_call(self._command + cmd, **kwargs)
>   File "/usr/lib64/python2.7/subprocess.py", line 186, in check_call
>     raise CalledProcessError(retcode, cmd)
> subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=5bcf7f1ce1a911e88b3152540069c830', '-u', '1000', '--security-opt', 'seccomp=unconfined', '--rm', '--net=none', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=8', '-e', 'DEBUG=', '-e', 'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-j_cwgv70/src/docker-src.2018-11-06-04.49.59.28947:/var/tmp/qemu:z,ro', 'qemu:fedora', '/var/tmp/qemu/run', 'test-mingw']' returned non-zero exit status 1
> make[1]: *** [tests/docker/Makefile.include:217: docker-run] Error 1
> make[1]: Leaving directory '/var/tmp/patchew-tester-tmp-j_cwgv70/src'
> make: *** [tests/docker/Makefile.include:251: docker-run-test-mingw@fedora] Error 2
> 
> real	0m37.093s
> user	0m5.048s
> sys	0m3.799s
> === OUTPUT END ===
> 
> Test command exited with code: 2
> 
> 
> ---
> Email generated automatically by Patchew [http://patchew.org/].
> Please send your feedback to patchew-devel@redhat.com