There are two issues with the current value of SMMU_BASE_ADDR_MASK:

- At the lower end, we are clearing bits [4:0]. Per the SMMUv3 spec,
  we should also be treating bit 5 as zero in the base address.
- At the upper end, we are clearing bits [63:48]. Per the SMMUv3 spec,
  only bits [63:52] must be explicitly treated as zero.

Update the SMMU_BASE_ADDR_MASK value to mask out bits [63:52] and [5:0].

ref. ARM IHI 0070C, section 6.3.23.

Signed-off-by: Simon Veith <sveith@amazon.de>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: qemu-arm@nongnu.org
---
 hw/arm/smmuv3-internal.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h
index d190181..042b435 100644
--- a/hw/arm/smmuv3-internal.h
+++ b/hw/arm/smmuv3-internal.h
@@ -99,7 +99,7 @@ REG32(GERROR_IRQ_CFG2, 0x74)
 
 #define A_STRTAB_BASE      0x80 /* 64b */
 
-#define SMMU_BASE_ADDR_MASK 0xffffffffffe0
+#define SMMU_BASE_ADDR_MASK 0xfffffffffffc0
 
 REG32(STRTAB_BASE_CFG,     0x88)
     FIELD(STRTAB_BASE_CFG, FMT,      16, 2)
-- 
2.7.4