ARM queue: nothing particularly exciting, but 18 patches is enough to send out. thanks -- PMM The following changes since commit 3dabde1128b671f36ac6cb36b97b273139964420: Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20170914' into staging (2017-09-14 16:33:02 +0100) are available in the git repository at: git://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20170914 for you to fetch changes up to ce3bc112cdb1d462e2d52eaa17a7314e7f3af504: mps2-an511: Fix wiring of UART overflow interrupt lines (2017-09-14 18:43:19 +0100) ---------------------------------------------------------------- target-arm queue: * v7M: various code cleanups * v7M: set correct BFSR bits on bus fault * v7M: clear exclusive monitor on reset and exception entry/exit * v7M: don't apply priority mask to negative priorities * zcu102: support 'secure' and 'virtualization' machine properties * aarch64: fix ERET single stepping * gpex: implement PCI INTx routing * mps2-an511: fix UART overflow interrupt line wiring ---------------------------------------------------------------- Alistair Francis (5): xlnx-ep108: Rename to ZCU102 xlnx-zcu102: Manually create the machines xlnx-zcu102: Add a machine level secure property xlnx-zcu102: Add a machine level virtualization property xlnx-zcu102: Mark the EP108 machine as deprecated Jaroslaw Pelczar (1): AArch64: Fix single stepping of ERET instruction Peter Maydell (8): target/arm: Use M_REG_NUM_BANKS rather than hardcoding 2 target/arm: Clear exclusive monitor on v7M reset, exception entry/exit target/arm: Get PRECISERR and IBUSERR the right way round nvic: Don't apply group priority mask to negative priorities target/arm: Remove unnecessary '| 0xf0000000' from do_v7m_exception_exit() target/arm: Add and use defines for EXCRET constants target/arm: Rename 'type' to 'excret' in do_v7m_exception_exit() mps2-an511: Fix wiring of UART overflow interrupt lines Pranavkumar Sawargaonkar (3): hw/pci-host/gpex: Set INTx index/gsi mapping hw/arm/virt: Set INTx/gsi mapping hw/pci-host/gpex: Implement PCI INTx routing Richard Henderson (1): target/arm: Avoid an extra temporary for store_exclusive hw/arm/Makefile.objs | 2 +- include/hw/arm/xlnx-zynqmp.h | 2 + include/hw/pci-host/gpex.h | 3 + target/arm/cpu.h | 35 +++--- target/arm/internals.h | 20 ++++ hw/arm/mps2.c | 4 +- hw/arm/virt.c | 1 + hw/arm/xlnx-ep108.c | 139 ----------------------- hw/arm/xlnx-zcu102.c | 259 +++++++++++++++++++++++++++++++++++++++++++ hw/arm/xlnx-zynqmp.c | 3 +- hw/intc/armv7m_nvic.c | 11 +- hw/pci-host/gpex.c | 22 ++++ target/arm/cpu.c | 6 + target/arm/helper.c | 43 ++++--- target/arm/op_helper.c | 2 +- target/arm/translate-a64.c | 27 ++--- 16 files changed, 382 insertions(+), 197 deletions(-) delete mode 100644 hw/arm/xlnx-ep108.c create mode 100644 hw/arm/xlnx-zcu102.c Use a symbolic constant M_REG_NUM_BANKS for the array size for registers which are banked by M profile security state, rather than hardcoding lots of 2s. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1505137930-13255-2-git-send-email-peter.maydell@linaro.org --- target/arm/cpu.h | 35 +++++++++++++++++++---------------- 1 file changed, 19 insertions(+), 16 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ * accessed via env->registerfield[env->v7m.secure] (whether the security * extension is implemented or not). */ -#define M_REG_NS 0 -#define M_REG_S 1 +enum { + M_REG_NS = 0, + M_REG_S = 1, + M_REG_NUM_BANKS = 2, +}; /* ARM-specific interrupt pending bits. */ #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t other_sp; uint32_t other_ss_msp; uint32_t other_ss_psp; - uint32_t vecbase[2]; - uint32_t basepri[2]; - uint32_t control[2]; - uint32_t ccr[2]; /* Configuration and Control */ - uint32_t cfsr[2]; /* Configurable Fault Status */ + uint32_t vecbase[M_REG_NUM_BANKS]; + uint32_t basepri[M_REG_NUM_BANKS]; + uint32_t control[M_REG_NUM_BANKS]; + uint32_t ccr[M_REG_NUM_BANKS]; /* Configuration and Control */ + uint32_t cfsr[M_REG_NUM_BANKS]; /* Configurable Fault Status */ uint32_t hfsr; /* HardFault Status */ uint32_t dfsr; /* Debug Fault Status Register */ - uint32_t mmfar[2]; /* MemManage Fault Address */ + uint32_t mmfar[M_REG_NUM_BANKS]; /* MemManage Fault Address */ uint32_t bfar; /* BusFault Address */ - unsigned mpu_ctrl[2]; /* MPU_CTRL */ + unsigned mpu_ctrl[M_REG_NUM_BANKS]; /* MPU_CTRL */ int exception; - uint32_t primask[2]; - uint32_t faultmask[2]; + uint32_t primask[M_REG_NUM_BANKS]; + uint32_t faultmask[M_REG_NUM_BANKS]; uint32_t secure; /* Is CPU in Secure state? (not guest visible) */ } v7m; @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { uint32_t *drbar; uint32_t *drsr; uint32_t *dracr; - uint32_t rnr[2]; + uint32_t rnr[M_REG_NUM_BANKS]; } pmsav7; /* PMSAv8 MPU */ @@ -XXX,XX +XXX,XX @@ typedef struct CPUARMState { * pmsav7.rnr (region number register) * pmsav7_dregion (number of configured regions) */ - uint32_t *rbar[2]; - uint32_t *rlar[2]; - uint32_t mair0[2]; - uint32_t mair1[2]; + uint32_t *rbar[M_REG_NUM_BANKS]; + uint32_t *rlar[M_REG_NUM_BANKS]; + uint32_t mair0[M_REG_NUM_BANKS]; + uint32_t mair1[M_REG_NUM_BANKS]; } pmsav8; void *nvic; -- 2.7.4 For M profile we must clear the exclusive monitor on reset, exception entry and exception exit. We weren't doing any of these things; fix this bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505137930-13255-3-git-send-email-peter.maydell@linaro.org --- target/arm/internals.h | 10 ++++++++++ target/arm/cpu.c | 6 ++++++ target/arm/helper.c | 2 ++ target/arm/op_helper.c | 2 +- 4 files changed, 19 insertions(+), 1 deletion(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_handle_psci_call(ARMCPU *cpu); #endif /** + * arm_clear_exclusive: clear the exclusive monitor + * @env: CPU env + * Clear the CPU's exclusive monitor, like the guest CLREX instruction. + */ +static inline void arm_clear_exclusive(CPUARMState *env) +{ + env->exclusive_addr = -1; +} + +/** * ARMMMUFaultInfo: Information describing an ARM MMU Fault * @s2addr: Address that caused a fault at stage 2 * @stage2: True if we faulted at stage 2 diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_reset(CPUState *s) env->regs[15] = 0xFFFF0000; } + /* M profile requires that reset clears the exclusive monitor; + * A profile does not, but clearing it makes more sense than having it + * set with an exclusive access on address zero. + */ + arm_clear_exclusive(env); + env->vfp.xregs[ARM_VFP_FPEXC] = 0; #endif diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_exception_taken(ARMCPU *cpu, uint32_t lr) armv7m_nvic_acknowledge_irq(env->nvic); switch_v7m_sp(env, 0); + arm_clear_exclusive(env); /* Clear IT bits */ env->condexec_bits = 0; env->regs[14] = lr; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) } /* Otherwise, we have a successful exception exit. */ + arm_clear_exclusive(env); qemu_log_mask(CPU_LOG_INT, "...successful exception return\n"); } diff --git a/target/arm/op_helper.c b/target/arm/op_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/op_helper.c +++ b/target/arm/op_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env) aarch64_save_sp(env, cur_el); - env->exclusive_addr = -1; + arm_clear_exclusive(env); /* We must squash the PSTATE.SS bit to zero unless both of the * following hold: -- 2.7.4 For a bus fault, the M profile BFSR bit PRECISERR means a bus fault on a data access, and IBUSERR means a bus fault on an instruction access. We had these the wrong way around; fix this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505137930-13255-4-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) case 0x8: /* External Abort */ switch (cs->exception_index) { case EXCP_PREFETCH_ABORT: - env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_PRECISERR_MASK; - qemu_log_mask(CPU_LOG_INT, "...with CFSR.PRECISERR\n"); + env->v7m.cfsr[M_REG_NS] |= R_V7M_CFSR_IBUSERR_MASK; + qemu_log_mask(CPU_LOG_INT, "...with CFSR.IBUSERR\n"); break; case EXCP_DATA_ABORT: env->v7m.cfsr[M_REG_NS] |= - (R_V7M_CFSR_IBUSERR_MASK | R_V7M_CFSR_BFARVALID_MASK); + (R_V7M_CFSR_PRECISERR_MASK | R_V7M_CFSR_BFARVALID_MASK); env->v7m.bfar = env->exception.vaddress; qemu_log_mask(CPU_LOG_INT, - "...with CFSR.IBUSERR and BFAR 0x%x\n", + "...with CFSR.PRECISERR and BFAR 0x%x\n", env->v7m.bfar); break; } -- 2.7.4 In several places we were unconditionally applying the nvic_gprio_mask() to a priority value. This is incorrect if the priority is one of the fixed negative priority values (for NMI and HardFault), so don't do it. This bug would have caused both NMI and HardFault to be considered as the same priority and so NMI wouldn't correctly preempt HardFault. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505137930-13255-5-git-send-email-peter.maydell@linaro.org --- hw/intc/armv7m_nvic.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/hw/intc/armv7m_nvic.c b/hw/intc/armv7m_nvic.c index XXXXXXX..XXXXXXX 100644 --- a/hw/intc/armv7m_nvic.c +++ b/hw/intc/armv7m_nvic.c @@ -XXX,XX +XXX,XX @@ static void nvic_recompute_state(NVICState *s) } } + if (active_prio > 0) { + active_prio &= nvic_gprio_mask(s); + } + s->vectpending = pend_irq; - s->exception_prio = active_prio & nvic_gprio_mask(s); + s->exception_prio = active_prio; trace_nvic_recompute_state(s->vectpending, s->exception_prio); } @@ -XXX,XX +XXX,XX @@ void armv7m_nvic_acknowledge_irq(void *opaque) assert(vec->enabled); assert(vec->pending); - pendgroupprio = vec->prio & nvic_gprio_mask(s); + pendgroupprio = vec->prio; + if (pendgroupprio > 0) { + pendgroupprio &= nvic_gprio_mask(s); + } assert(pendgroupprio < running); trace_nvic_acknowledge_irq(pending, vec->prio); -- 2.7.4 In do_v7m_exception_exit(), there's no need to force the high 4 bits of 'type' to 1 when calling v7m_exception_taken(), because we know that they're always 1 or we could not have got to this "handle return to magic exception return address" code. Remove the unnecessary ORs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1505137930-13255-6-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); - v7m_exception_taken(cpu, type | 0xf0000000); + v7m_exception_taken(cpu, type); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); return; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; v7m_push_stack(cpu); - v7m_exception_taken(cpu, type | 0xf0000000); + v7m_exception_taken(cpu, type); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: " "failed exception return integrity check\n"); return; -- 2.7.4 The exception-return magic values get some new bits in v8M, which makes some bit definitions for them worthwhile. We don't use the bit definitions for the switch on the low bits which checks the return type for v7M, because this is defined in the v7M ARM ARM as a set of valid values rather than via per-bit checks. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1505137930-13255-7-git-send-email-peter.maydell@linaro.org --- target/arm/internals.h | 10 ++++++++++ target/arm/helper.c | 14 +++++++++----- 2 files changed, 19 insertions(+), 5 deletions(-) diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ FIELD(V7M_CONTROL, NPRIV, 0, 1) FIELD(V7M_CONTROL, SPSEL, 1, 1) FIELD(V7M_CONTROL, FPCA, 2, 1) +/* Bit definitions for v7M exception return payload */ +FIELD(V7M_EXCRET, ES, 0, 1) +FIELD(V7M_EXCRET, RES0, 1, 1) +FIELD(V7M_EXCRET, SPSEL, 2, 1) +FIELD(V7M_EXCRET, MODE, 3, 1) +FIELD(V7M_EXCRET, FTYPE, 4, 1) +FIELD(V7M_EXCRET, DCRS, 5, 1) +FIELD(V7M_EXCRET, S, 6, 1) +FIELD(V7M_EXCRET, RES1, 7, 25) /* including the must-be-1 prefix */ + /* * For AArch64, map a given EL to an index in the banked_spsr array. * Note that this mapping and the AArch32 mapping defined in bank_number() diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) " previous exception %d\n", type, env->v7m.exception); - if (extract32(type, 5, 23) != extract32(-1, 5, 23)) { + if ((type & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) { qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero high bits in exception " "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n", type); } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.) */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - int es = type & 1; + int es = type & R_V7M_EXCRET_ES_MASK; if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) { env->v7m.faultmask[es] = 0; } @@ -XXX,XX +XXX,XX @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) return; /* Never happens. Keep compiler happy. */ } - lr = 0xfffffff1; + lr = R_V7M_EXCRET_RES1_MASK | + R_V7M_EXCRET_S_MASK | + R_V7M_EXCRET_DCRS_MASK | + R_V7M_EXCRET_FTYPE_MASK | + R_V7M_EXCRET_ES_MASK; if (env->v7m.control[env->v7m.secure] & R_V7M_CONTROL_SPSEL_MASK) { - lr |= 4; + lr |= R_V7M_EXCRET_SPSEL_MASK; } if (!arm_v7m_is_handler_mode(env)) { - lr |= 8; + lr |= R_V7M_EXCRET_MODE_MASK; } v7m_push_stack(cpu); -- 2.7.4 In the v7M and v8M ARM ARM, the magic exception return values are referred to as EXC_RETURN values, and in QEMU we use V7M_EXCRET_* constants to define bits within them. Rename the 'type' variable which holds the exception return value in do_v7m_exception_exit() to excret, making it clearer that it does hold an EXC_RETURN value. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1505137930-13255-8-git-send-email-peter.maydell@linaro.org --- target/arm/helper.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static void v7m_push_stack(ARMCPU *cpu) static void do_v7m_exception_exit(ARMCPU *cpu) { CPUARMState *env = &cpu->env; - uint32_t type; + uint32_t excret; uint32_t xpsr; bool ufault = false; bool return_to_sp_process = false; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * the target value up between env->regs[15] and env->thumb in * gen_bx(). Reconstitute it. */ - type = env->regs[15]; + excret = env->regs[15]; if (env->thumb) { - type |= 1; + excret |= 1; } qemu_log_mask(CPU_LOG_INT, "Exception return: magic PC %" PRIx32 " previous exception %d\n", - type, env->v7m.exception); + excret, env->v7m.exception); - if ((type & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) { + if ((excret & R_V7M_EXCRET_RES1_MASK) != R_V7M_EXCRET_RES1_MASK) { qemu_log_mask(LOG_GUEST_ERROR, "M profile: zero high bits in exception " - "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n", type); + "exit PC value 0x%" PRIx32 " are UNPREDICTABLE\n", + excret); } if (env->v7m.exception != ARMV7M_EXCP_NMI) { @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) * which security state's faultmask to clear. (v8M ARM ARM R_KBNF.) */ if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { - int es = type & R_V7M_EXCRET_ES_MASK; + int es = excret & R_V7M_EXCRET_ES_MASK; if (armv7m_nvic_raw_execution_priority(env->nvic) >= 0) { env->v7m.faultmask[es] = 0; } @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) g_assert_not_reached(); } - switch (type & 0xf) { + switch (excret & 0xf) { case 1: /* Return to Handler */ return_to_handler = true; break; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) */ env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); - v7m_exception_taken(cpu, type); + v7m_exception_taken(cpu, excret); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on existing " "stackframe: failed exception return integrity check\n"); return; @@ -XXX,XX +XXX,XX @@ static void do_v7m_exception_exit(ARMCPU *cpu) /* The restored xPSR exception field will be zero if we're * resuming in Thread mode. If that doesn't match what the - * exception return type specified then this is a UsageFault. + * exception return excret specified then this is a UsageFault. */ if (return_to_handler != arm_v7m_is_handler_mode(env)) { /* Take an INVPC UsageFault by pushing the stack again. */ armv7m_nvic_set_pending(env->nvic, ARMV7M_EXCP_USAGE); env->v7m.cfsr[env->v7m.secure] |= R_V7M_CFSR_INVPC_MASK; v7m_push_stack(cpu); - v7m_exception_taken(cpu, type); + v7m_exception_taken(cpu, excret); qemu_log_mask(CPU_LOG_INT, "...taking UsageFault on new stackframe: " "failed exception return integrity check\n"); return; -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> The EP108 is a early access development board. Now that silicon is in production people have access to the ZCU102. Let's rename the internal QEMU files and variables to use the ZCU102. There is no functional change here as the EP108 is still a valid board option. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/Makefile.objs | 2 +- hw/arm/{xlnx-ep108.c => xlnx-zcu102.c} | 30 +++++++++++++++--------------- 2 files changed, 16 insertions(+), 16 deletions(-) rename hw/arm/{xlnx-ep108.c => xlnx-zcu102.c} (85%) diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -XXX,XX +XXX,XX @@ obj-y += omap1.o omap2.o strongarm.o obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o -obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o +obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-zcu102.o obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-zcu102.c similarity index 85% rename from hw/arm/xlnx-ep108.c rename to hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-ep108.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ /* - * Xilinx ZynqMP EP108 board + * Xilinx ZynqMP ZCU102 board * * Copyright (C) 2015 Xilinx Inc * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com> @@ -XXX,XX +XXX,XX @@ #include "exec/address-spaces.h" #include "qemu/log.h" -typedef struct XlnxEP108 { +typedef struct XlnxZCU102 { XlnxZynqMPState soc; MemoryRegion ddr_ram; -} XlnxEP108; +} XlnxZCU102; -static struct arm_boot_info xlnx_ep108_binfo; +static struct arm_boot_info xlnx_zcu102_binfo; -static void xlnx_ep108_init(MachineState *machine) +static void xlnx_zcu102_init(MachineState *machine) { - XlnxEP108 *s = g_new0(XlnxEP108, 1); + XlnxZCU102 *s = g_new0(XlnxZCU102, 1); int i; uint64_t ram_size = machine->ram_size; @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_init(MachineState *machine) } if (ram_size < 0x08000000) { - qemu_log("WARNING: RAM size 0x%" PRIx64 " is small for EP108", + qemu_log("WARNING: RAM size 0x%" PRIx64 " is small for ZCU102", ram_size); } @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_init(MachineState *machine) /* TODO create and connect IDE devices for ide_drive_get() */ - xlnx_ep108_binfo.ram_size = ram_size; - xlnx_ep108_binfo.kernel_filename = machine->kernel_filename; - xlnx_ep108_binfo.kernel_cmdline = machine->kernel_cmdline; - xlnx_ep108_binfo.initrd_filename = machine->initrd_filename; - xlnx_ep108_binfo.loader_start = 0; - arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_ep108_binfo); + xlnx_zcu102_binfo.ram_size = ram_size; + xlnx_zcu102_binfo.kernel_filename = machine->kernel_filename; + xlnx_zcu102_binfo.kernel_cmdline = machine->kernel_cmdline; + xlnx_zcu102_binfo.initrd_filename = machine->initrd_filename; + xlnx_zcu102_binfo.loader_start = 0; + arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_zcu102_binfo); } static void xlnx_ep108_machine_init(MachineClass *mc) { mc->desc = "Xilinx ZynqMP EP108 board"; - mc->init = xlnx_ep108_init; + mc->init = xlnx_zcu102_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; mc->ignore_memory_transaction_failures = true; @@ -XXX,XX +XXX,XX @@ DEFINE_MACHINE("xlnx-ep108", xlnx_ep108_machine_init) static void xlnx_zcu102_machine_init(MachineClass *mc) { mc->desc = "Xilinx ZynqMP ZCU102 board"; - mc->init = xlnx_ep108_init; + mc->init = xlnx_zcu102_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; mc->ignore_memory_transaction_failures = true; -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> In preperation for future work let's manually create the Xilnx machines. This will allow us to set properties for the machines in the future. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 67 insertions(+), 7 deletions(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ #include "qemu/log.h" typedef struct XlnxZCU102 { + MachineState parent_obj; + XlnxZynqMPState soc; MemoryRegion ddr_ram; } XlnxZCU102; +#define TYPE_ZCU102_MACHINE MACHINE_TYPE_NAME("xlnx-zcu102") +#define ZCU102_MACHINE(obj) \ + OBJECT_CHECK(XlnxZCU102, (obj), TYPE_ZCU102_MACHINE) + +#define TYPE_EP108_MACHINE MACHINE_TYPE_NAME("xlnx-ep108") +#define EP108_MACHINE(obj) \ + OBJECT_CHECK(XlnxZCU102, (obj), TYPE_EP108_MACHINE) + static struct arm_boot_info xlnx_zcu102_binfo; -static void xlnx_zcu102_init(MachineState *machine) +static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) { - XlnxZCU102 *s = g_new0(XlnxZCU102, 1); int i; uint64_t ram_size = machine->ram_size; @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_init(MachineState *machine) arm_load_kernel(s->soc.boot_cpu_ptr, &xlnx_zcu102_binfo); } -static void xlnx_ep108_machine_init(MachineClass *mc) +static void xlnx_ep108_init(MachineState *machine) +{ + XlnxZCU102 *s = EP108_MACHINE(machine); + + xlnx_zynqmp_init(s, machine); +} + +static void xlnx_ep108_machine_instance_init(Object *obj) { +} + +static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + mc->desc = "Xilinx ZynqMP EP108 board"; - mc->init = xlnx_zcu102_init; + mc->init = xlnx_ep108_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; mc->ignore_memory_transaction_failures = true; } -DEFINE_MACHINE("xlnx-ep108", xlnx_ep108_machine_init) +static const TypeInfo xlnx_ep108_machine_init_typeinfo = { + .name = MACHINE_TYPE_NAME("xlnx-ep108"), + .parent = TYPE_MACHINE, + .class_init = xlnx_ep108_machine_class_init, + .instance_init = xlnx_ep108_machine_instance_init, + .instance_size = sizeof(XlnxZCU102), +}; -static void xlnx_zcu102_machine_init(MachineClass *mc) +static void xlnx_ep108_machine_init_register_types(void) { + type_register_static(&xlnx_ep108_machine_init_typeinfo); +} + +static void xlnx_zcu102_init(MachineState *machine) +{ + XlnxZCU102 *s = ZCU102_MACHINE(machine); + + xlnx_zynqmp_init(s, machine); +} + +static void xlnx_zcu102_machine_instance_init(Object *obj) +{ +} + +static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + mc->desc = "Xilinx ZynqMP ZCU102 board"; mc->init = xlnx_zcu102_init; mc->block_default_type = IF_IDE; @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_init(MachineClass *mc) mc->ignore_memory_transaction_failures = true; } -DEFINE_MACHINE("xlnx-zcu102", xlnx_zcu102_machine_init) +static const TypeInfo xlnx_zcu102_machine_init_typeinfo = { + .name = MACHINE_TYPE_NAME("xlnx-zcu102"), + .parent = TYPE_MACHINE, + .class_init = xlnx_zcu102_machine_class_init, + .instance_init = xlnx_zcu102_machine_instance_init, + .instance_size = sizeof(XlnxZCU102), +}; + +static void xlnx_zcu102_machine_init_register_types(void) +{ + type_register_static(&xlnx_zcu102_machine_init_typeinfo); +} + +type_init(xlnx_zcu102_machine_init_register_types) +type_init(xlnx_ep108_machine_init_register_types) -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> Add a machine level secure property. This defaults to false and can be set to true using this machine command line argument: -machine xlnx-zcu102,secure=on This follows what the ARM virt machine does. This property only applies to the ZCU102 machine. The EP108 machine does not have this property. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { XlnxZynqMPState soc; MemoryRegion ddr_ram; + + bool secure; } XlnxZCU102; #define TYPE_ZCU102_MACHINE MACHINE_TYPE_NAME("xlnx-zcu102") @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { static struct arm_boot_info xlnx_zcu102_binfo; +static bool zcu102_get_secure(Object *obj, Error **errp) +{ + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + return s->secure; +} + +static void zcu102_set_secure(Object *obj, bool value, Error **errp) +{ + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + s->secure = value; +} + static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) { int i; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) object_property_set_link(OBJECT(&s->soc), OBJECT(&s->ddr_ram), "ddr-ram", &error_abort); + object_property_set_bool(OBJECT(&s->soc), s->secure, "secure", + &error_fatal); object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_init(MachineState *machine) static void xlnx_ep108_machine_instance_init(Object *obj) { + XlnxZCU102 *s = EP108_MACHINE(obj); + + /* EP108, we don't support setting secure */ + s->secure = false; } static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_init(MachineState *machine) static void xlnx_zcu102_machine_instance_init(Object *obj) { + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + /* Default to secure mode being disabled */ + s->secure = false; + object_property_add_bool(obj, "secure", zcu102_get_secure, + zcu102_set_secure, NULL); + object_property_set_description(obj, "secure", + "Set on/off to enable/disable the ARM " + "Security Extensions (TrustZone)", + NULL); } static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> Add a machine level virtualization property. This defaults to false and can be set to true using this machine command line argument: -machine xlnx-zcu102,virtualization=on This follows what the ARM virt machine does. This property only applies to the ZCU102 machine. The EP108 machine does not have this property. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/xlnx-zynqmp.h | 2 ++ hw/arm/xlnx-zcu102.c | 30 +++++++++++++++++++++++++++++- hw/arm/xlnx-zynqmp.c | 3 ++- 3 files changed, 33 insertions(+), 2 deletions(-) diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZynqMPState { /* Has the ARM Security extensions? */ bool secure; + /* Has the ARM Virtualization extensions? */ + bool virt; /* Has the RPU subsystem? */ bool has_rpu; } XlnxZynqMPState; diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ typedef struct XlnxZCU102 { MemoryRegion ddr_ram; bool secure; + bool virt; } XlnxZCU102; #define TYPE_ZCU102_MACHINE MACHINE_TYPE_NAME("xlnx-zcu102") @@ -XXX,XX +XXX,XX @@ static void zcu102_set_secure(Object *obj, bool value, Error **errp) s->secure = value; } +static bool zcu102_get_virt(Object *obj, Error **errp) +{ + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + return s->virt; +} + +static void zcu102_set_virt(Object *obj, bool value, Error **errp) +{ + XlnxZCU102 *s = ZCU102_MACHINE(obj); + + s->virt = value; +} + static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) { int i; @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_init(XlnxZCU102 *s, MachineState *machine) "ddr-ram", &error_abort); object_property_set_bool(OBJECT(&s->soc), s->secure, "secure", &error_fatal); + object_property_set_bool(OBJECT(&s->soc), s->virt, "virtualization", + &error_fatal); object_property_set_bool(OBJECT(&s->soc), true, "realized", &error_fatal); @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_machine_instance_init(Object *obj) { XlnxZCU102 *s = EP108_MACHINE(obj); - /* EP108, we don't support setting secure */ + /* EP108, we don't support setting secure or virt */ s->secure = false; + s->virt = false; } static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) @@ -XXX,XX +XXX,XX @@ static void xlnx_zcu102_machine_instance_init(Object *obj) "Set on/off to enable/disable the ARM " "Security Extensions (TrustZone)", NULL); + + /* Default to virt (EL2) being disabled */ + s->virt = false; + object_property_add_bool(obj, "virtualization", zcu102_get_virt, + zcu102_set_virt, NULL); + object_property_set_description(obj, "virtualization", + "Set on/off to enable/disable emulating a " + "guest CPU which implements the ARM " + "Virtualization Extensions", + NULL); } static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zynqmp.c +++ b/hw/arm/xlnx-zynqmp.c @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) object_property_set_bool(OBJECT(&s->apu_cpu[i]), s->secure, "has_el3", NULL); object_property_set_bool(OBJECT(&s->apu_cpu[i]), - false, "has_el2", NULL); + s->virt, "has_el2", NULL); object_property_set_int(OBJECT(&s->apu_cpu[i]), GIC_BASE_ADDR, "reset-cbar", &error_abort); object_property_set_bool(OBJECT(&s->apu_cpu[i]), true, "realized", @@ -XXX,XX +XXX,XX @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) static Property xlnx_zynqmp_props[] = { DEFINE_PROP_STRING("boot-cpu", XlnxZynqMPState, boot_cpu), DEFINE_PROP_BOOL("secure", XlnxZynqMPState, secure, false), + DEFINE_PROP_BOOL("virtualization", XlnxZynqMPState, virt, false), DEFINE_PROP_BOOL("has_rpu", XlnxZynqMPState, has_rpu, false), DEFINE_PROP_LINK("ddr-ram", XlnxZynqMPState, ddr_ram, TYPE_MEMORY_REGION, MemoryRegion *), -- 2.7.4 From: Alistair Francis <alistair.francis@xilinx.com> The EP108 is the same as the ZCU102, mark it as deprecated as we don't need two machines. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/xlnx-zcu102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/arm/xlnx-zcu102.c b/hw/arm/xlnx-zcu102.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/xlnx-zcu102.c +++ b/hw/arm/xlnx-zcu102.c @@ -XXX,XX +XXX,XX @@ static void xlnx_ep108_machine_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); - mc->desc = "Xilinx ZynqMP EP108 board"; + mc->desc = "Xilinx ZynqMP EP108 board (Deprecated, please use xlnx-zcu102)"; mc->init = xlnx_ep108_init; mc->block_default_type = IF_IDE; mc->units_per_default_bus = 1; -- 2.7.4 From: Jaroslaw Pelczar <j.pelczar@samsung.com> Previously when single stepping through ERET instruction via GDB would result in debugger entering the "next" PC after ERET instruction. When debugging in kernel mode, this will also cause unintended behavior, because debugger will try to access memory from EL0 point of view. Signed-off-by: Jaroslaw Pelczar <j.pelczar@samsung.com> Message-id: 001c01d32895$483027f0$d89077d0$@samsung.com Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_tb_stop(DisasContextBase *dcbase, CPUState *cpu) default: gen_a64_set_pc_im(dc->pc); /* fall through */ + case DISAS_EXIT: case DISAS_JUMP: if (dc->base.singlestep_enabled) { gen_exception_internal(EXCP_DEBUG); -- 2.7.4 From: Richard Henderson <richard.henderson@linaro.org> Instead of copying addr to a local temp, reuse the value (which we have just compared as equal) already saved in cpu_exclusive_addr. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20170908163859.29820-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/translate-a64.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-) diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/translate-a64.c +++ b/target/arm/translate-a64.c @@ -XXX,XX +XXX,XX @@ static void gen_load_exclusive(DisasContext *s, int rt, int rt2, } static void gen_store_exclusive(DisasContext *s, int rd, int rt, int rt2, - TCGv_i64 inaddr, int size, int is_pair) + TCGv_i64 addr, int size, int is_pair) { /* if (env->exclusive_addr == addr && env->exclusive_val == [addr] * && (!is_pair || env->exclusive_high == [addr + datasize])) { @@ -XXX,XX +XXX,XX @@ static void gen_store_exclusive(DisasContext *s, int rd, int rt, int rt2, */ TCGLabel *fail_label = gen_new_label(); TCGLabel *done_label = gen_new_label(); - TCGv_i64 addr = tcg_temp_local_new_i64(); TCGv_i64 tmp; - /* Copy input into a local temp so it is not trashed when the - * basic block ends at the branch insn. - */ - tcg_gen_mov_i64(addr, inaddr); tcg_gen_brcond_i64(TCG_COND_NE, addr, cpu_exclusive_addr, fail_label); tmp = tcg_temp_new_i64(); @@ -XXX,XX +XXX,XX @@ static void gen_store_exclusive(DisasContext *s, int rd, int rt, int rt2, } else { tcg_gen_concat32_i64(tmp, cpu_reg(s, rt2), cpu_reg(s, rt)); } - tcg_gen_atomic_cmpxchg_i64(tmp, addr, cpu_exclusive_val, tmp, + tcg_gen_atomic_cmpxchg_i64(tmp, cpu_exclusive_addr, + cpu_exclusive_val, tmp, get_mem_index(s), MO_64 | MO_ALIGN | s->be_data); tcg_gen_setcond_i64(TCG_COND_NE, tmp, tmp, cpu_exclusive_val); } else if (s->be_data == MO_LE) { - gen_helper_paired_cmpxchg64_le(tmp, cpu_env, addr, cpu_reg(s, rt), - cpu_reg(s, rt2)); + gen_helper_paired_cmpxchg64_le(tmp, cpu_env, cpu_exclusive_addr, + cpu_reg(s, rt), cpu_reg(s, rt2)); } else { - gen_helper_paired_cmpxchg64_be(tmp, cpu_env, addr, cpu_reg(s, rt), - cpu_reg(s, rt2)); + gen_helper_paired_cmpxchg64_be(tmp, cpu_env, cpu_exclusive_addr, + cpu_reg(s, rt), cpu_reg(s, rt2)); } } else { - TCGv_i64 val = cpu_reg(s, rt); - tcg_gen_atomic_cmpxchg_i64(tmp, addr, cpu_exclusive_val, val, - get_mem_index(s), + tcg_gen_atomic_cmpxchg_i64(tmp, cpu_exclusive_addr, cpu_exclusive_val, + cpu_reg(s, rt), get_mem_index(s), size | MO_ALIGN | s->be_data); tcg_gen_setcond_i64(TCG_COND_NE, tmp, tmp, cpu_exclusive_val); } - - tcg_temp_free_i64(addr); - tcg_gen_mov_i64(cpu_reg(s, rd), tmp); tcg_temp_free_i64(tmp); tcg_gen_br(done_label); -- 2.7.4 From: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> To implement INTx to gsi routing we need to pass the gpex host bridge the gsi associated to each INTx index. Let's introduce irq_num array and gpex_set_irq_num setter function. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Tested-by: Feng Kan <fkan@apm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1505296004-6798-2-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/pci-host/gpex.h | 3 +++ hw/pci-host/gpex.c | 10 ++++++++++ 2 files changed, 13 insertions(+) diff --git a/include/hw/pci-host/gpex.h b/include/hw/pci-host/gpex.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/pci-host/gpex.h +++ b/include/hw/pci-host/gpex.h @@ -XXX,XX +XXX,XX @@ typedef struct GPEXHost { MemoryRegion io_ioport; MemoryRegion io_mmio; qemu_irq irq[GPEX_NUM_IRQS]; + int irq_num[GPEX_NUM_IRQS]; } GPEXHost; +int gpex_set_irq_num(GPEXHost *s, int index, int gsi); + #endif /* HW_GPEX_H */ diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/gpex.c +++ b/hw/pci-host/gpex.c @@ -XXX,XX +XXX,XX @@ static void gpex_set_irq(void *opaque, int irq_num, int level) qemu_set_irq(s->irq[irq_num], level); } +int gpex_set_irq_num(GPEXHost *s, int index, int gsi) +{ + if (index >= GPEX_NUM_IRQS) { + return -EINVAL; + } + + s->irq_num[index] = gsi; + return 0; +} + static void gpex_host_realize(DeviceState *dev, Error **errp) { PCIHostState *pci = PCI_HOST_BRIDGE(dev); -- 2.7.4 From: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Let's provide the GPEX host bridge with the INTx/gsi mapping. This is needed for INTx/gsi routing. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Feng Kan <fkan@apm.com> Message-id: 1505296004-6798-3-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/arm/virt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/hw/arm/virt.c b/hw/arm/virt.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -XXX,XX +XXX,XX @@ static void create_pcie(const VirtMachineState *vms, qemu_irq *pic) for (i = 0; i < GPEX_NUM_IRQS; i++) { sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pic[irq + i]); + gpex_set_irq_num(GPEX_HOST(dev), i, irq + i); } pci = PCI_HOST_BRIDGE(dev); -- 2.7.4 From: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Now we are able to retrieve the gsi from the INTx pin, let's enable intx_to_irq routing. From that point on, irqfd becomes usable along with INTx when assigning a PCIe device. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org> Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Tested-by: Feng Kan <fkan@apm.com> Message-id: 1505296004-6798-4-git-send-email-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- hw/pci-host/gpex.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/hw/pci-host/gpex.c b/hw/pci-host/gpex.c index XXXXXXX..XXXXXXX 100644 --- a/hw/pci-host/gpex.c +++ b/hw/pci-host/gpex.c @@ -XXX,XX +XXX,XX @@ int gpex_set_irq_num(GPEXHost *s, int index, int gsi) return 0; } +static PCIINTxRoute gpex_route_intx_pin_to_irq(void *opaque, int pin) +{ + PCIINTxRoute route; + GPEXHost *s = opaque; + + route.mode = PCI_INTX_ENABLED; + route.irq = s->irq_num[pin]; + + return route; +} + static void gpex_host_realize(DeviceState *dev, Error **errp) { PCIHostState *pci = PCI_HOST_BRIDGE(dev); @@ -XXX,XX +XXX,XX @@ static void gpex_host_realize(DeviceState *dev, Error **errp) &s->io_ioport, 0, 4, TYPE_PCIE_BUS); qdev_set_parent_bus(DEVICE(&s->gpex_root), BUS(pci->bus)); + pci_bus_set_route_irq_fn(pci->bus, gpex_route_intx_pin_to_irq); qdev_init_nofail(DEVICE(&s->gpex_root)); } -- 2.7.4 Fix an error that meant we were wiring every UART's overflow interrupts into the same inputs 0 and 1 of the OR gate, rather than giving each its own input. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1505232834-20890-1-git-send-email-peter.maydell@linaro.org --- hw/arm/mps2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/arm/mps2.c b/hw/arm/mps2.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2.c +++ b/hw/arm/mps2.c @@ -XXX,XX +XXX,XX @@ static void mps2_common_init(MachineState *machine) cmsdk_apb_uart_create(uartbase[i], qdev_get_gpio_in(txrx_orgate_dev, 0), qdev_get_gpio_in(txrx_orgate_dev, 1), - qdev_get_gpio_in(orgate_dev, 0), - qdev_get_gpio_in(orgate_dev, 1), + qdev_get_gpio_in(orgate_dev, i * 2), + qdev_get_gpio_in(orgate_dev, i * 2 + 1), NULL, uartchr, SYSCLK_FRQ); } -- 2.7.4 Hi; here's the latest round of arm patches. I have included also my patchset for the RTC devices to avoid keeping time_t and time_t diffs in 32-bit variables. thanks -- PMM The following changes since commit 156618d9ea67f2f2e31d9dedd97f2dcccbe6808c: Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging (2023-08-30 09:20:27 -0400) are available in the Git repository at: https://git.linaro.org/people/pmaydell/qemu-arm.git tags/pull-target-arm-20230831 for you to fetch changes up to e73b8bb8a3e9a162f70e9ffbf922d4fafc96bbfb: hw/arm: Set number of MPU regions correctly for an505, an521, an524 (2023-08-31 11:07:02 +0100) ---------------------------------------------------------------- target-arm queue: * Some of the preliminary patches for Cortex-A710 support * i.MX7 and i.MX6UL refactoring * Implement SRC device for i.MX7 * Catch illegal-exception-return from EL3 with bad NSE/NS * Use 64-bit offsets for holding time_t differences in RTC devices * Model correct number of MPU regions for an505, an521, an524 boards ---------------------------------------------------------------- Alex Bennée (1): target/arm: properly document FEAT_CRC32 Jean-Christophe Dubois (6): Remove i.MX7 IOMUX GPR device from i.MX6UL Refactor i.MX6UL processor code Add i.MX6UL missing devices. Refactor i.MX7 processor code Add i.MX7 missing TZ devices and memory regions Add i.MX7 SRC device implementation Peter Maydell (8): target/arm: Catch illegal-exception-return from EL3 with bad NSE/NS hw/rtc/m48t59: Use 64-bit arithmetic in set_alarm() hw/rtc/twl92230: Use int64_t for sec_offset and alm_sec hw/rtc/aspeed_rtc: Use 64-bit offset for holding time_t difference rtc: Use time_t for passing and returning time offsets target/arm: Do all "ARM_FEATURE_X implies Y" checks in post_init hw/arm/armv7m: Add mpu-ns-regions and mpu-s-regions properties hw/arm: Set number of MPU regions correctly for an505, an521, an524 Richard Henderson (9): target/arm: Reduce dcz_blocksize to uint8_t target/arm: Allow cpu to configure GM blocksize target/arm: Support more GM blocksizes target/arm: When tag memory is not present, set MTE=1 target/arm: Introduce make_ccsidr64 target/arm: Apply access checks to neoverse-n1 special registers target/arm: Apply access checks to neoverse-v1 special registers target/arm: Suppress FEAT_TRBE (Trace Buffer Extension) target/arm: Implement FEAT_HPDS2 as a no-op docs/system/arm/emulation.rst | 2 + include/hw/arm/armsse.h | 5 + include/hw/arm/armv7m.h | 8 + include/hw/arm/fsl-imx6ul.h | 158 ++++++++++++++++--- include/hw/arm/fsl-imx7.h | 338 ++++++++++++++++++++++++++++++----------- include/hw/misc/imx7_src.h | 66 ++++++++ include/hw/rtc/aspeed_rtc.h | 2 +- include/sysemu/rtc.h | 4 +- target/arm/cpregs.h | 2 + target/arm/cpu.h | 5 +- target/arm/internals.h | 6 - target/arm/tcg/translate.h | 2 + hw/arm/armsse.c | 16 ++ hw/arm/armv7m.c | 21 +++ hw/arm/fsl-imx6ul.c | 174 +++++++++++++-------- hw/arm/fsl-imx7.c | 201 +++++++++++++++++++----- hw/arm/mps2-tz.c | 29 ++++ hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++ hw/rtc/aspeed_rtc.c | 5 +- hw/rtc/m48t59.c | 2 +- hw/rtc/twl92230.c | 4 +- softmmu/rtc.c | 4 +- target/arm/cpu.c | 207 ++++++++++++++----------- target/arm/helper.c | 15 +- target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 102 +++++++++---- target/arm/tcg/helper-a64.c | 9 ++ target/arm/tcg/mte_helper.c | 90 ++++++++--- target/arm/tcg/translate-a64.c | 5 +- hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 31 files changed, 1393 insertions(+), 372 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c From: Richard Henderson <richard.henderson@linaro.org> This value is only 4 bits wide. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230811214031.171020-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { bool prop_lpa2; /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ - uint32_t dcz_blocksize; + uint8_t dcz_blocksize; + uint64_t rvbar_prop; /* Property/input signals. */ /* Configurable aspects of GIC cpu interface (which is part of the CPU) */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Previously we hard-coded the blocksize with GMID_EL1_BS. But the value we choose for -cpu max does not match the value that cortex-a710 uses. Mirror the way we handle dcz_blocksize. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230811214031.171020-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.h | 2 ++ target/arm/internals.h | 6 ----- target/arm/tcg/translate.h | 2 ++ target/arm/helper.c | 11 +++++--- target/arm/tcg/cpu64.c | 1 + target/arm/tcg/mte_helper.c | 46 ++++++++++++++++++++++------------ target/arm/tcg/translate-a64.c | 5 ++-- 7 files changed, 45 insertions(+), 28 deletions(-) diff --git a/target/arm/cpu.h b/target/arm/cpu.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.h +++ b/target/arm/cpu.h @@ -XXX,XX +XXX,XX @@ struct ArchCPU { /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */ uint8_t dcz_blocksize; + /* GM blocksize, in log_2(words), ie low 4 bits of GMID_EL0 */ + uint8_t gm_blocksize; uint64_t rvbar_prop; /* Property/input signals. */ diff --git a/target/arm/internals.h b/target/arm/internals.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/internals.h +++ b/target/arm/internals.h @@ -XXX,XX +XXX,XX @@ void arm_log_exception(CPUState *cs); #endif /* !CONFIG_USER_ONLY */ -/* - * The log2 of the words in the tag block, for GMID_EL1.BS. - * The is the maximum, 256 bytes, which manipulates 64-bits of tags. - */ -#define GMID_EL1_BS 6 - /* * SVE predicates are 1/8 the size of SVE vectors, and cannot use * the same simd_desc() encoding due to restrictions on size. diff --git a/target/arm/tcg/translate.h b/target/arm/tcg/translate.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate.h +++ b/target/arm/tcg/translate.h @@ -XXX,XX +XXX,XX @@ typedef struct DisasContext { int8_t btype; /* A copy of cpu->dcz_blocksize. */ uint8_t dcz_blocksize; + /* A copy of cpu->gm_blocksize. */ + uint8_t gm_blocksize; /* True if this page is guarded. */ bool guarded_page; /* Bottom two bits of XScale c15_cpar coprocessor access control reg */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo mte_reginfo[] = { .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, .access = PL1_RW, .accessfn = access_mte, .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, - { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, - .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, - .access = PL1_R, .accessfn = access_aa64_tid5, - .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, { .name = "TCO", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, .type = ARM_CP_NO_RAW, @@ -XXX,XX +XXX,XX @@ void register_cp_regs_for_features(ARMCPU *cpu) * then define only a RAZ/WI version of PSTATE.TCO. */ if (cpu_isar_feature(aa64_mte, cpu)) { + ARMCPRegInfo gmid_reginfo = { + .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, + .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, + .access = PL1_R, .accessfn = access_aa64_tid5, + .type = ARM_CP_CONST, .resetvalue = cpu->gm_blocksize, + }; + define_one_arm_cp_reg(cpu, &gmid_reginfo); define_arm_cp_regs(cpu, mte_reginfo); define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) cpu->ctr = 0x80038003; /* 32 byte I and D cacheline size, VIPT icache */ cpu->dcz_blocksize = 7; /* 512 bytes */ #endif + cpu->gm_blocksize = 6; /* 256 bytes */ cpu->sve_vq.supported = MAKE_64BIT_MASK(0, ARM_MAX_VQ); cpu->sme_vq.supported = SVE_VQ_POW2_MAP; diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ void HELPER(st2g_stub)(CPUARMState *env, uint64_t ptr) } } -#define LDGM_STGM_SIZE (4 << GMID_EL1_BS) - uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_LOAD, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* The tag is squashed to zero if the page does not support tags. */ if (!tag_mem) { return 0; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are loading 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - return ldq_le_p(tag_mem); + switch (gm_bs) { + case 6: + /* 256 bytes -> 16 tags -> 64 result bits */ + return ldq_le_p(tag_mem); + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) { int mmu_idx = cpu_mmu_index(env, false); uintptr_t ra = GETPC(); + int gm_bs = env_archcpu(env)->gm_blocksize; + int gm_bs_bytes = 4 << gm_bs; void *tag_mem; - ptr = QEMU_ALIGN_DOWN(ptr, LDGM_STGM_SIZE); + ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); /* Trap if accessing an invalid page. */ tag_mem = allocation_tag_mem(env, mmu_idx, ptr, MMU_DATA_STORE, - LDGM_STGM_SIZE, MMU_DATA_LOAD, - LDGM_STGM_SIZE / (2 * TAG_GRANULE), ra); + gm_bs_bytes, MMU_DATA_LOAD, + gm_bs_bytes / (2 * TAG_GRANULE), ra); /* * Tag store only happens if the page support tags, @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - QEMU_BUILD_BUG_ON(GMID_EL1_BS != 6); /* - * We are storing 64-bits worth of tags. The ordering of elements - * within the word corresponds to a 64-bit little-endian operation. + * The ordering of elements within the word corresponds to + * a little-endian operation. */ - stq_le_p(tag_mem, val); + switch (gm_bs) { + case 6: + stq_le_p(tag_mem, val); + break; + default: + /* cpu configured with unsupported gm blocksize. */ + g_assert_not_reached(); + } } void HELPER(stzgm_tags)(CPUARMState *env, uint64_t ptr, uint64_t val) diff --git a/target/arm/tcg/translate-a64.c b/target/arm/tcg/translate-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/translate-a64.c +++ b/target/arm/tcg/translate-a64.c @@ -XXX,XX +XXX,XX @@ static bool trans_STGM(DisasContext *s, arg_ldst_tag *a) gen_helper_stgm(cpu_env, addr, tcg_rt); } else { MMUAccessType acc = MMU_DATA_STORE; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static bool trans_LDGM(DisasContext *s, arg_ldst_tag *a) gen_helper_ldgm(tcg_rt, cpu_env, addr); } else { MMUAccessType acc = MMU_DATA_LOAD; - int size = 4 << GMID_EL1_BS; + int size = 4 << s->gm_blocksize; clean_addr = clean_data_tbi(s, addr); tcg_gen_andi_i64(clean_addr, clean_addr, -size); @@ -XXX,XX +XXX,XX @@ static void aarch64_tr_init_disas_context(DisasContextBase *dcbase, dc->cp_regs = arm_cpu->cp_regs; dc->features = env->features; dc->dcz_blocksize = arm_cpu->dcz_blocksize; + dc->gm_blocksize = arm_cpu->gm_blocksize; #ifdef CONFIG_USER_ONLY /* In sve_probe_page, we assume TBI is enabled. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Support all of the easy GM block sizes. Use direct memory operations, since the pointers are aligned. While BS=2 (16 bytes, 1 tag) is a legal setting, that requires an atomic store of one nibble. This is not difficult, but there is also no point in supporting it until required. Note that cortex-a710 sets GM blocksize to match its cacheline size of 64 bytes. I expect many implementations will also match the cacheline, which makes 16 bytes very unlikely. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-4-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 18 +++++++++--- target/arm/tcg/mte_helper.c | 56 +++++++++++++++++++++++++++++++------ 2 files changed, 62 insertions(+), 12 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) ID_PFR1, VIRTUALIZATION, 0); } + if (cpu_isar_feature(aa64_mte, cpu)) { + /* + * The architectural range of GM blocksize is 2-6, however qemu + * doesn't support blocksize of 2 (see HELPER(ldgm)). + */ + if (tcg_enabled()) { + assert(cpu->gm_blocksize >= 3 && cpu->gm_blocksize <= 6); + } + #ifndef CONFIG_USER_ONLY - if (cpu->tag_memory == NULL && cpu_isar_feature(aa64_mte, cpu)) { /* * Disable the MTE feature bits if we do not have tag-memory * provided by the machine. */ - cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); - } + if (cpu->tag_memory == NULL) { + cpu->isar.id_aa64pfr1 = + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + } #endif + } if (tcg_enabled()) { /* diff --git a/target/arm/tcg/mte_helper.c b/target/arm/tcg/mte_helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/mte_helper.c +++ b/target/arm/tcg/mte_helper.c @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + uint64_t ret; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ uint64_t HELPER(ldgm)(CPUARMState *env, uint64_t ptr) /* * The ordering of elements within the word corresponds to - * a little-endian operation. + * a little-endian operation. Computation of shift comes from + * + * index = address<LOG2_TAG_GRANULE+3:LOG2_TAG_GRANULE> + * data<index*4+3:index*4> = tag + * + * Because of the alignment of ptr above, BS=6 has shift=0. + * All memory operations are aligned. Defer support for BS=2, + * requiring insertion or extraction of a nibble, until we + * support a cpu that requires it. */ switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + ret = *(uint8_t *)tag_mem; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + ret = cpu_to_le16(*(uint16_t *)tag_mem); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + ret = cpu_to_le32(*(uint32_t *)tag_mem); + break; case 6: /* 256 bytes -> 16 tags -> 64 result bits */ - return ldq_le_p(tag_mem); + return cpu_to_le64(*(uint64_t *)tag_mem); default: - /* cpu configured with unsupported gm blocksize. */ + /* + * CPU configured with unsupported/invalid gm blocksize. + * This is detected early in arm_cpu_realizefn. + */ g_assert_not_reached(); } + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + return ret << shift; } void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) int gm_bs = env_archcpu(env)->gm_blocksize; int gm_bs_bytes = 4 << gm_bs; void *tag_mem; + int shift; ptr = QEMU_ALIGN_DOWN(ptr, gm_bs_bytes); @@ -XXX,XX +XXX,XX @@ void HELPER(stgm)(CPUARMState *env, uint64_t ptr, uint64_t val) return; } - /* - * The ordering of elements within the word corresponds to - * a little-endian operation. - */ + /* See LDGM for comments on BS and on shift. */ + shift = extract64(ptr, LOG2_TAG_GRANULE, 4) * 4; + val >>= shift; switch (gm_bs) { + case 3: + /* 32 bytes -> 2 tags -> 8 result bits */ + *(uint8_t *)tag_mem = val; + break; + case 4: + /* 64 bytes -> 4 tags -> 16 result bits */ + *(uint16_t *)tag_mem = cpu_to_le16(val); + break; + case 5: + /* 128 bytes -> 8 tags -> 32 result bits */ + *(uint32_t *)tag_mem = cpu_to_le32(val); + break; case 6: - stq_le_p(tag_mem, val); + /* 256 bytes -> 16 tags -> 64 result bits */ + *(uint64_t *)tag_mem = cpu_to_le64(val); break; default: /* cpu configured with unsupported gm blocksize. */ -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> When the cpu support MTE, but the system does not, reduce cpu support to user instructions at EL0 instead of completely disabling MTE. If we encounter a cpu implementation which does something else, we can revisit this setting. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-5-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) #ifndef CONFIG_USER_ONLY /* - * Disable the MTE feature bits if we do not have tag-memory - * provided by the machine. + * If we do not have tag-memory provided by the machine, + * reduce MTE support to instructions enabled at EL0. + * This matches Cortex-A710 BROADCASTMTE input being LOW. */ if (cpu->tag_memory == NULL) { cpu->isar.id_aa64pfr1 = - FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 0); + FIELD_DP64(cpu->isar.id_aa64pfr1, ID_AA64PFR1, MTE, 1); } #endif } -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Do not hard-code the constants for Neoverse V1. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-6-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 48 ++++++++++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 16 deletions(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ #include "qemu/module.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" +#include "qemu/units.h" #include "internals.h" #include "cpregs.h" +static uint64_t make_ccsidr64(unsigned assoc, unsigned linesize, + unsigned cachesize) +{ + unsigned lg_linesize = ctz32(linesize); + unsigned sets; + + /* + * The 64-bit CCSIDR_EL1 format is: + * [55:32] number of sets - 1 + * [23:3] associativity - 1 + * [2:0] log2(linesize) - 4 + * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc + */ + assert(assoc != 0); + assert(is_power_of_2(linesize)); + assert(lg_linesize >= 4 && lg_linesize <= 7 + 4); + + /* sets * associativity * linesize == cachesize. */ + sets = cachesize / (assoc * linesize); + assert(cachesize % (assoc * linesize) == 0); + + return ((uint64_t)(sets - 1) << 32) + | ((assoc - 1) << 3) + | (lg_linesize - 4); +} + static void aarch64_a35_initfn(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); @@ -XXX,XX +XXX,XX @@ static void aarch64_neoverse_v1_initfn(Object *obj) * The Neoverse-V1 r1p2 TRM lists 32-bit format CCSIDR_EL1 values, * but also says it implements CCIDX, which means they should be * 64-bit format. So we here use values which are based on the textual - * information in chapter 2 of the TRM (and on the fact that - * sets * associativity * linesize == cachesize). - * - * The 64-bit CCSIDR_EL1 format is: - * [55:32] number of sets - 1 - * [23:3] associativity - 1 - * [2:0] log2(linesize) - 4 - * so 0 == 16 bytes, 1 == 32 bytes, 2 == 64 bytes, etc - * - * L1: 4-way set associative 64-byte line size, total size 64K, - * so sets is 256. + * information in chapter 2 of the TRM: * + * L1: 4-way set associative 64-byte line size, total size 64K. * L2: 8-way set associative, 64 byte line size, either 512K or 1MB. - * We pick 1MB, so this has 2048 sets. - * * L3: No L3 (this matches the CLIDR_EL1 value). */ - cpu->ccsidr[0] = 0x000000ff0000001aull; /* 64KB L1 dcache */ - cpu->ccsidr[1] = 0x000000ff0000001aull; /* 64KB L1 icache */ - cpu->ccsidr[2] = 0x000007ff0000003aull; /* 1MB L2 cache */ + cpu->ccsidr[0] = make_ccsidr64(4, 64, 64 * KiB); /* L1 dcache */ + cpu->ccsidr[1] = cpu->ccsidr[0]; /* L1 icache */ + cpu->ccsidr[2] = make_ccsidr64(8, 64, 1 * MiB); /* L2 cache */ /* From 3.2.115 SCTLR_EL3 */ cpu->reset_sctlr = 0x30c50838; -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Access to many of the special registers is enabled or disabled by ACTLR_EL[23], which we implement as constant 0, which means that all writes outside EL3 should trap. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-7-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpregs.h | 2 ++ target/arm/helper.c | 4 ++-- target/arm/tcg/cpu64.c | 46 +++++++++++++++++++++++++++++++++--------- 3 files changed, 41 insertions(+), 11 deletions(-) diff --git a/target/arm/cpregs.h b/target/arm/cpregs.h index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpregs.h +++ b/target/arm/cpregs.h @@ -XXX,XX +XXX,XX @@ static inline void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu) { } void define_cortex_a72_a57_a53_cp_reginfo(ARMCPU *cpu); #endif +CPAccessResult access_tvm_trvm(CPUARMState *, const ARMCPRegInfo *, bool); + #endif /* TARGET_ARM_CPREGS_H */ diff --git a/target/arm/helper.c b/target/arm/helper.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/helper.c +++ b/target/arm/helper.c @@ -XXX,XX +XXX,XX @@ static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, } /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ -static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, - bool isread) +CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, + bool isread) { if (arm_current_el(env) == 1) { uint64_t trap = isread ? HCR_TRVM : HCR_TVM; diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void aarch64_a64fx_initfn(Object *obj) /* TODO: Add A64FX specific HPC extension registers */ } +static CPAccessResult access_actlr_w(CPUARMState *env, const ARMCPRegInfo *r, + bool read) +{ + if (!read) { + int el = arm_current_el(env); + + /* Because ACTLR_EL2 is constant 0, writes below EL2 trap to EL2. */ + if (el < 2 && arm_is_el2_enabled(env)) { + return CP_ACCESS_TRAP_EL2; + } + /* Because ACTLR_EL3 is constant 0, writes below EL3 trap to EL3. */ + if (el < 3 && arm_feature(env, ARM_FEATURE_EL3)) { + return CP_ACCESS_TRAP_EL3; + } + } + return CP_ACCESS_OK; +} + static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { { .name = "ATCR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 7, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + /* Traps and enables are the same as for TCR_EL1. */ + .accessfn = access_tvm_trvm, .fgt = FGT_TCR_EL1, }, { .name = "ATCR_EL2", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 4, .crn = 15, .crm = 7, .opc2 = 0, .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUACTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUACTLR3_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, /* * Report CPUCFR_EL1.SCU as 1, as we do not implement the DSU * (and in particular its system registers). @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 4 }, { .name = "CPUECTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 4, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0x961563010, + .accessfn = access_actlr_w }, { .name = "CPUPCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 8, .opc2 = 1, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, @@ -XXX,XX +XXX,XX @@ static const ARMCPRegInfo neoverse_n1_cp_reginfo[] = { .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, { .name = "CPUPWRCTLR_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 7, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCDN_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 2, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGCTL_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 1, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "ERXPFGF_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 2, .opc2 = 0, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, }; static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> There is only one additional EL1 register modeled, which also needs to use access_actlr_w. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-8-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/tcg/cpu64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ static void define_neoverse_n1_cp_reginfo(ARMCPU *cpu) static const ARMCPRegInfo neoverse_v1_cp_reginfo[] = { { .name = "CPUECTLR2_EL1", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 0, .crn = 15, .crm = 1, .opc2 = 5, - .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, + .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, + .accessfn = access_actlr_w }, { .name = "CPUPPMCR_EL3", .state = ARM_CP_STATE_AA64, .opc0 = 3, .opc1 = 6, .crn = 15, .crm = 2, .opc2 = 0, .access = PL3_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> Like FEAT_TRF (Self-hosted Trace Extension), suppress tracing external to the cpu, which is out of scope for QEMU. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-10-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) /* FEAT_SPE (Statistical Profiling Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, PMSVER, 0); + /* FEAT_TRBE (Trace Buffer Extension) */ + cpu->isar.id_aa64dfr0 = + FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEBUFFER, 0); /* FEAT_TRF (Self-hosted Trace Extension) */ cpu->isar.id_aa64dfr0 = FIELD_DP64(cpu->isar.id_aa64dfr0, ID_AA64DFR0, TRACEFILT, 0); -- 2.34.1 From: Richard Henderson <richard.henderson@linaro.org> This feature allows the operating system to set TCR_ELx.HWU* to allow the implementation to use the PBHA bits from the block and page descriptors for for IMPLEMENTATION DEFINED purposes. Since QEMU has no need to use these bits, we may simply ignore them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230811214031.171020-11-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu32.c | 2 +- target/arm/tcg/cpu64.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_HAFDBS (Hardware management of the access flag and dirty bit state) - FEAT_HCX (Support for the HCRX_EL2 register) - FEAT_HPDS (Hierarchical permission disables) +- FEAT_HPDS2 (Translation table page-based hardware attributes) - FEAT_I8MM (AArch64 Int8 matrix multiplication instructions) - FEAT_IDST (ID space trap handling) - FEAT_IESB (Implicit error synchronization event) diff --git a/target/arm/tcg/cpu32.c b/target/arm/tcg/cpu32.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu32.c +++ b/target/arm/tcg/cpu32.c @@ -XXX,XX +XXX,XX @@ void aa32_max_features(ARMCPU *cpu) cpu->isar.id_mmfr3 = t; t = cpu->isar.id_mmfr4; - t = FIELD_DP32(t, ID_MMFR4, HPDS, 1); /* FEAT_AA32HPD */ + t = FIELD_DP32(t, ID_MMFR4, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP32(t, ID_MMFR4, AC2, 1); /* ACTLR2, HACTLR2 */ t = FIELD_DP32(t, ID_MMFR4, CNP, 1); /* FEAT_TTCNP */ t = FIELD_DP32(t, ID_MMFR4, XNX, 1); /* FEAT_XNX */ diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64MMFR1, HAFDBS, 2); /* FEAT_HAFDBS */ t = FIELD_DP64(t, ID_AA64MMFR1, VMIDBITS, 2); /* FEAT_VMID16 */ t = FIELD_DP64(t, ID_AA64MMFR1, VH, 1); /* FEAT_VHE */ - t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 1); /* FEAT_HPDS */ + t = FIELD_DP64(t, ID_AA64MMFR1, HPDS, 2); /* FEAT_HPDS2 */ t = FIELD_DP64(t, ID_AA64MMFR1, LO, 1); /* FEAT_LOR */ t = FIELD_DP64(t, ID_AA64MMFR1, PAN, 3); /* FEAT_PAN3 */ t = FIELD_DP64(t, ID_AA64MMFR1, XNX, 1); /* FEAT_XNX */ -- 2.34.1 From: Alex Bennée <alex.bennee@linaro.org> This is a mandatory feature for Armv8.1 architectures but we don't state the feature clearly in our emulation list. Also include FEAT_CRC32 comment in aarch64_max_tcg_initfn for ease of grepping. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230824075406.1515566-1-alex.bennee@linaro.org Cc: qemu-stable@nongnu.org Message-Id: <20230222110104.3996971-1-alex.bennee@linaro.org> [PMM: pluralize 'instructions' in docs] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- docs/system/arm/emulation.rst | 1 + target/arm/tcg/cpu64.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/system/arm/emulation.rst b/docs/system/arm/emulation.rst index XXXXXXX..XXXXXXX 100644 --- a/docs/system/arm/emulation.rst +++ b/docs/system/arm/emulation.rst @@ -XXX,XX +XXX,XX @@ the following architecture extensions: - FEAT_BBM at level 2 (Translation table break-before-make levels) - FEAT_BF16 (AArch64 BFloat16 instructions) - FEAT_BTI (Branch Target Identification) +- FEAT_CRC32 (CRC32 instructions) - FEAT_CSV2 (Cache speculation variant 2) - FEAT_CSV2_1p1 (Cache speculation variant 2, version 1.1) - FEAT_CSV2_1p2 (Cache speculation variant 2, version 1.2) diff --git a/target/arm/tcg/cpu64.c b/target/arm/tcg/cpu64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/cpu64.c +++ b/target/arm/tcg/cpu64.c @@ -XXX,XX +XXX,XX @@ void aarch64_max_tcg_initfn(Object *obj) t = FIELD_DP64(t, ID_AA64ISAR0, AES, 2); /* FEAT_PMULL */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA1, 1); /* FEAT_SHA1 */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA2, 2); /* FEAT_SHA512 */ - t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); + t = FIELD_DP64(t, ID_AA64ISAR0, CRC32, 1); /* FEAT_CRC32 */ t = FIELD_DP64(t, ID_AA64ISAR0, ATOMIC, 2); /* FEAT_LSE */ t = FIELD_DP64(t, ID_AA64ISAR0, RDM, 1); /* FEAT_RDM */ t = FIELD_DP64(t, ID_AA64ISAR0, SHA3, 1); /* FEAT_SHA3 */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> i.MX7 IOMUX GPR device is not equivalent to i.MX6UL IOMUXC GPR device. In particular, register 22 is not present on i.MX6UL and this is actualy The only register that is really emulated in the i.MX7 IOMUX GPR device. Note: The i.MX6UL code is actually also implementing the IOMUX GPR device as an unimplemented device at the same bus adress and the 2 instantiations were actualy colliding. So we go back to the unimplemented device for now. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 48681bf51ee97646479bb261bee19abebbc8074e.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 -- hw/arm/fsl-imx6ul.c | 11 ----------- 2 files changed, 13 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx6ul_ccm.h" #include "hw/misc/imx6_src.h" #include "hw/misc/imx7_snvs.h" -#include "hw/misc/imx7_gpr.h" #include "hw/intc/imx_gpcv2.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { IMX6SRCState src; IMX7SNVSState snvs; IMXGPCv2State gpcv2; - IMX7GPRState gpr; IMXSPIState spi[FSL_IMX6UL_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX6UL_NUM_I2CS]; IMXSerialState uart[FSL_IMX6UL_NUM_UARTS]; diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) */ object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); - /* - * GPR - */ - object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); - /* * GPIOs 1 to 5 */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOGn_IRQ[i])); } - /* - * GPR - */ - sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR); - /* * SDMA */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for most i.MX6UL devices in i.MX6UL header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: d579043fbd4e4b490370783fda43fc02c8e9be75.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 156 +++++++++++++++++++++++++++++++----- hw/arm/fsl-imx6ul.c | 147 ++++++++++++++++++++++----------- 2 files changed, 232 insertions(+), 71 deletions(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ #include "exec/memory.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX6UL "fsl-imx6ul" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX6ULState, FSL_IMX6UL) @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_ADCS = 2, FSL_IMX6UL_NUM_USB_PHYS = 2, FSL_IMX6UL_NUM_USBS = 2, + FSL_IMX6UL_NUM_SAIS = 3, + FSL_IMX6UL_NUM_CANS = 2, + FSL_IMX6UL_NUM_PWMS = 4, }; struct FslIMX6ULState { @@ -XXX,XX +XXX,XX @@ struct FslIMX6ULState { enum FslIMX6ULMemoryMap { FSL_IMX6UL_MMDC_ADDR = 0x80000000, - FSL_IMX6UL_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX6UL_MMDC_SIZE = (2 * GiB), FSL_IMX6UL_QSPI1_MEM_ADDR = 0x60000000, - FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, - FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, - FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, - FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_MEM_SIZE = (256 * MiB), - /* AIPS-2 */ + FSL_IMX6UL_EIM_ALIAS_ADDR = 0x58000000, + FSL_IMX6UL_EIM_ALIAS_SIZE = (128 * MiB), + + FSL_IMX6UL_EIM_CS_ADDR = 0x50000000, + FSL_IMX6UL_EIM_CS_SIZE = (128 * MiB), + + FSL_IMX6UL_AES_ENCRYPT_ADDR = 0x10000000, + FSL_IMX6UL_AES_ENCRYPT_SIZE = (1 * MiB), + + FSL_IMX6UL_QSPI1_RX_ADDR = 0x0C000000, + FSL_IMX6UL_QSPI1_RX_SIZE = (32 * MiB), + + /* AIPS-2 Begin */ FSL_IMX6UL_UART6_ADDR = 0x021FC000, + FSL_IMX6UL_I2C4_ADDR = 0x021F8000, + FSL_IMX6UL_UART5_ADDR = 0x021F4000, FSL_IMX6UL_UART4_ADDR = 0x021F0000, FSL_IMX6UL_UART3_ADDR = 0x021EC000, FSL_IMX6UL_UART2_ADDR = 0x021E8000, + FSL_IMX6UL_WDOG3_ADDR = 0x021E4000, + FSL_IMX6UL_QSPI_ADDR = 0x021E0000, + FSL_IMX6UL_QSPI_SIZE = 0x500, + FSL_IMX6UL_SYS_CNT_CTRL_ADDR = 0x021DC000, + FSL_IMX6UL_SYS_CNT_CTRL_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_CMP_ADDR = 0x021D8000, + FSL_IMX6UL_SYS_CNT_CMP_SIZE = (16 * KiB), + FSL_IMX6UL_SYS_CNT_RD_ADDR = 0x021D4000, + FSL_IMX6UL_SYS_CNT_RD_SIZE = (16 * KiB), + FSL_IMX6UL_TZASC_ADDR = 0x021D0000, + FSL_IMX6UL_TZASC_SIZE = (16 * KiB), + FSL_IMX6UL_PXP_ADDR = 0x021CC000, + FSL_IMX6UL_PXP_SIZE = (16 * KiB), + FSL_IMX6UL_LCDIF_ADDR = 0x021C8000, + FSL_IMX6UL_LCDIF_SIZE = 0x100, + FSL_IMX6UL_CSI_ADDR = 0x021C4000, + FSL_IMX6UL_CSI_SIZE = 0x100, + FSL_IMX6UL_CSU_ADDR = 0x021C0000, + FSL_IMX6UL_CSU_SIZE = (16 * KiB), + FSL_IMX6UL_OCOTP_CTRL_ADDR = 0x021BC000, + FSL_IMX6UL_OCOTP_CTRL_SIZE = (4 * KiB), + FSL_IMX6UL_EIM_ADDR = 0x021B8000, + FSL_IMX6UL_EIM_SIZE = 0x100, + FSL_IMX6UL_SIM2_ADDR = 0x021B4000, + FSL_IMX6UL_MMDC_CFG_ADDR = 0x021B0000, + FSL_IMX6UL_MMDC_CFG_SIZE = (4 * KiB), + FSL_IMX6UL_ROMCP_ADDR = 0x021AC000, + FSL_IMX6UL_ROMCP_SIZE = 0x300, + FSL_IMX6UL_I2C3_ADDR = 0x021A8000, FSL_IMX6UL_I2C2_ADDR = 0x021A4000, FSL_IMX6UL_I2C1_ADDR = 0x021A0000, + FSL_IMX6UL_ADC2_ADDR = 0x0219C000, FSL_IMX6UL_ADC1_ADDR = 0x02198000, + FSL_IMX6UL_ADCn_SIZE = 0x100, + FSL_IMX6UL_USDHC2_ADDR = 0x02194000, FSL_IMX6UL_USDHC1_ADDR = 0x02190000, - FSL_IMX6UL_SIM1_ADDR = 0x0218C000, - FSL_IMX6UL_ENET1_ADDR = 0x02188000, - FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, - FSL_IMX6UL_USBO2_USB_ADDR = 0x02184000, - FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, - FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, - FSL_IMX6UL_CAAM_ADDR = 0x02140000, - FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, - /* AIPS-1 */ + FSL_IMX6UL_SIM1_ADDR = 0x0218C000, + FSL_IMX6UL_SIMn_SIZE = (16 * KiB), + + FSL_IMX6UL_ENET1_ADDR = 0x02188000, + + FSL_IMX6UL_USBO2_USBMISC_ADDR = 0x02184800, + FSL_IMX6UL_USBO2_USB1_ADDR = 0x02184000, + FSL_IMX6UL_USBO2_USB2_ADDR = 0x02184200, + + FSL_IMX6UL_USBO2_PL301_ADDR = 0x02180000, + FSL_IMX6UL_USBO2_PL301_SIZE = (16 * KiB), + + FSL_IMX6UL_AIPS2_CFG_ADDR = 0x0217C000, + FSL_IMX6UL_AIPS2_CFG_SIZE = 0x100, + + FSL_IMX6UL_CAAM_ADDR = 0x02140000, + FSL_IMX6UL_CAAM_SIZE = (16 * KiB), + + FSL_IMX6UL_A7MPCORE_DAP_ADDR = 0x02100000, + FSL_IMX6UL_A7MPCORE_DAP_SIZE = (4 * KiB), + /* AIPS-2 End */ + + /* AIPS-1 Begin */ FSL_IMX6UL_PWM8_ADDR = 0x020FC000, FSL_IMX6UL_PWM7_ADDR = 0x020F8000, FSL_IMX6UL_PWM6_ADDR = 0x020F4000, FSL_IMX6UL_PWM5_ADDR = 0x020F0000, + FSL_IMX6UL_SDMA_ADDR = 0x020EC000, + FSL_IMX6UL_SDMA_SIZE = 0x300, + FSL_IMX6UL_GPT2_ADDR = 0x020E8000, + FSL_IMX6UL_IOMUXC_GPR_ADDR = 0x020E4000, + FSL_IMX6UL_IOMUXC_GPR_SIZE = 0x40, + FSL_IMX6UL_IOMUXC_ADDR = 0x020E0000, + FSL_IMX6UL_IOMUXC_SIZE = 0x700, + FSL_IMX6UL_GPC_ADDR = 0x020DC000, + FSL_IMX6UL_SRC_ADDR = 0x020D8000, + FSL_IMX6UL_EPIT2_ADDR = 0x020D4000, FSL_IMX6UL_EPIT1_ADDR = 0x020D0000, + FSL_IMX6UL_SNVS_HP_ADDR = 0x020CC000, + FSL_IMX6UL_USBPHY2_ADDR = 0x020CA000, - FSL_IMX6UL_USBPHY2_SIZE = (4 * 1024), FSL_IMX6UL_USBPHY1_ADDR = 0x020C9000, - FSL_IMX6UL_USBPHY1_SIZE = (4 * 1024), + FSL_IMX6UL_ANALOG_ADDR = 0x020C8000, + FSL_IMX6UL_ANALOG_SIZE = 0x300, + FSL_IMX6UL_CCM_ADDR = 0x020C4000, + FSL_IMX6UL_WDOG2_ADDR = 0x020C0000, FSL_IMX6UL_WDOG1_ADDR = 0x020BC000, + FSL_IMX6UL_KPP_ADDR = 0x020B8000, + FSL_IMX6UL_KPP_SIZE = 0x10, + FSL_IMX6UL_ENET2_ADDR = 0x020B4000, + FSL_IMX6UL_SNVS_LP_ADDR = 0x020B0000, + FSL_IMX6UL_SNVS_LP_SIZE = (16 * KiB), + FSL_IMX6UL_GPIO5_ADDR = 0x020AC000, FSL_IMX6UL_GPIO4_ADDR = 0x020A8000, FSL_IMX6UL_GPIO3_ADDR = 0x020A4000, FSL_IMX6UL_GPIO2_ADDR = 0x020A0000, FSL_IMX6UL_GPIO1_ADDR = 0x0209C000, + FSL_IMX6UL_GPT1_ADDR = 0x02098000, + FSL_IMX6UL_CAN2_ADDR = 0x02094000, FSL_IMX6UL_CAN1_ADDR = 0x02090000, + FSL_IMX6UL_CANn_SIZE = (4 * KiB), + FSL_IMX6UL_PWM4_ADDR = 0x0208C000, FSL_IMX6UL_PWM3_ADDR = 0x02088000, FSL_IMX6UL_PWM2_ADDR = 0x02084000, FSL_IMX6UL_PWM1_ADDR = 0x02080000, + FSL_IMX6UL_PWMn_SIZE = 0x20, + FSL_IMX6UL_AIPS1_CFG_ADDR = 0x0207C000, + FSL_IMX6UL_AIPS1_CFG_SIZE = (16 * KiB), + FSL_IMX6UL_BEE_ADDR = 0x02044000, + FSL_IMX6UL_BEE_SIZE = (16 * KiB), + FSL_IMX6UL_TOUCH_CTRL_ADDR = 0x02040000, + FSL_IMX6UL_TOUCH_CTRL_SIZE = 0x100, + FSL_IMX6UL_SPBA_ADDR = 0x0203C000, + FSL_IMX6UL_SPBA_SIZE = 0x100, + FSL_IMX6UL_ASRC_ADDR = 0x02034000, + FSL_IMX6UL_ASRC_SIZE = 0x100, + FSL_IMX6UL_SAI3_ADDR = 0x02030000, FSL_IMX6UL_SAI2_ADDR = 0x0202C000, FSL_IMX6UL_SAI1_ADDR = 0x02028000, + FSL_IMX6UL_SAIn_SIZE = 0x200, + FSL_IMX6UL_UART8_ADDR = 0x02024000, FSL_IMX6UL_UART1_ADDR = 0x02020000, FSL_IMX6UL_UART7_ADDR = 0x02018000, + FSL_IMX6UL_ECSPI4_ADDR = 0x02014000, FSL_IMX6UL_ECSPI3_ADDR = 0x02010000, FSL_IMX6UL_ECSPI2_ADDR = 0x0200C000, FSL_IMX6UL_ECSPI1_ADDR = 0x02008000, + FSL_IMX6UL_SPDIF_ADDR = 0x02004000, + FSL_IMX6UL_SPDIF_SIZE = 0x100, + /* AIPS-1 End */ + + FSL_IMX6UL_BCH_ADDR = 0x01808000, + FSL_IMX6UL_BCH_SIZE = 0x200, + + FSL_IMX6UL_GPMI_ADDR = 0x01806000, + FSL_IMX6UL_GPMI_SIZE = 0x200, FSL_IMX6UL_APBH_DMA_ADDR = 0x01804000, - FSL_IMX6UL_APBH_DMA_SIZE = (32 * 1024), + FSL_IMX6UL_APBH_DMA_SIZE = (4 * KiB), FSL_IMX6UL_A7MPCORE_ADDR = 0x00A00000, FSL_IMX6UL_OCRAM_ALIAS_ADDR = 0x00920000, - FSL_IMX6UL_OCRAM_ALIAS_SIZE = 0x00060000, + FSL_IMX6UL_OCRAM_ALIAS_SIZE = (384 * KiB), + FSL_IMX6UL_OCRAM_MEM_ADDR = 0x00900000, - FSL_IMX6UL_OCRAM_MEM_SIZE = 0x00020000, + FSL_IMX6UL_OCRAM_MEM_SIZE = (128 * KiB), + FSL_IMX6UL_CAAM_MEM_ADDR = 0x00100000, - FSL_IMX6UL_CAAM_MEM_SIZE = 0x00008000, + FSL_IMX6UL_CAAM_MEM_SIZE = (32 * KiB), + FSL_IMX6UL_ROM_ADDR = 0x00000000, - FSL_IMX6UL_ROM_SIZE = 0x00018000, + FSL_IMX6UL_ROM_SIZE = (96 * KiB), }; enum FslIMX6ULIRQs { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * GPIOs 1 to 5 + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { snprintf(name, NAME_SIZE, "epit%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * eCSPI + * eCSPIs */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { snprintf(name, NAME_SIZE, "usbphy%d", i); object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); } + + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_init(Object *obj) } /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX6UL_A7MPCORE_DAP_SIZE); /* - * GPT 1, 2 + * GPTs */ for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) { static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * EPIT 1, 2 + * EPITs */ for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) { static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * GPIO + * GPIOs */ for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) { static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * IOMUXC and IOMUXC_GPR + * IOMUXC */ - for (i = 0; i < 1; i++) { - static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = { - FSL_IMX6UL_IOMUXC_ADDR, - FSL_IMX6UL_IOMUXC_GPR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000); - } + create_unimplemented_device("iomuxc", FSL_IMX6UL_IOMUXC_ADDR, + FSL_IMX6UL_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_gpr", FSL_IMX6UL_IOMUXC_GPR_ADDR, + FSL_IMX6UL_IOMUXC_GPR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = { FSL_IMX6UL_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * I2C + * I2Cs */ for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) { static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) { static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_ENETn_TIMER_IRQ[i])); } - /* USB */ + /* + * USB PHYs + */ for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) { + static const hwaddr + FSL_IMX6UL_USB_PHYn_ADDR[FSL_IMX6UL_NUM_USB_PHYS] = { + FSL_IMX6UL_USBPHY1_ADDR, + FSL_IMX6UL_USBPHY2_ADDR, + }; + sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, - FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000); + FSL_IMX6UL_USB_PHYn_ADDR[i]); } + /* + * USBs + */ for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) { + static const hwaddr FSL_IMX6UL_USB02_USBn_ADDR[FSL_IMX6UL_NUM_USBS] = { + FSL_IMX6UL_USBO2_USB1_ADDR, + FSL_IMX6UL_USBO2_USB2_ADDR, + }; + static const int FSL_IMX6UL_USBn_IRQ[] = { FSL_IMX6UL_USB1_IRQ, FSL_IMX6UL_USB2_IRQ, }; + sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, - FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200); + FSL_IMX6UL_USB02_USBn_ADDR[i]); sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX6UL_USBn_IRQ[i])); } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) { static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) { static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_WDOG2_ADDR, FSL_IMX6UL_WDOG3_ADDR, }; + static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = { FSL_IMX6UL_WDOG1_IRQ, FSL_IMX6UL_WDOG2_IRQ, @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) /* * SDMA */ - create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000); + create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, + FSL_IMX6UL_SDMA_SIZE); /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000); - create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000); - create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_SAIS; i++) { + static const hwaddr FSL_IMX6UL_SAIn_ADDR[FSL_IMX6UL_NUM_SAIS] = { + FSL_IMX6UL_SAI1_ADDR, + FSL_IMX6UL_SAI2_ADDR, + FSL_IMX6UL_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX6UL_SAIn_ADDR[i], + FSL_IMX6UL_SAIn_SIZE); + } /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000); - create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000); - create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000); - create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_PWMS; i++) { + static const hwaddr FSL_IMX6UL_PWMn_ADDR[FSL_IMX6UL_NUM_PWMS] = { + FSL_IMX6UL_PWM1_ADDR, + FSL_IMX6UL_PWM2_ADDR, + FSL_IMX6UL_PWM3_ADDR, + FSL_IMX6UL_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX6UL_PWMn_ADDR[i], + FSL_IMX6UL_PWMn_SIZE); + } /* * Audio ASRC (asynchronous sample rate converter) */ - create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000); + create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, + FSL_IMX6UL_ASRC_SIZE); /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000); - create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000); + for (i = 0; i < FSL_IMX6UL_NUM_CANS; i++) { + static const hwaddr FSL_IMX6UL_CANn_ADDR[FSL_IMX6UL_NUM_CANS] = { + FSL_IMX6UL_CAN1_ADDR, + FSL_IMX6UL_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX6UL_CANn_ADDR[i], + FSL_IMX6UL_CANn_SIZE); + } /* * APHB_DMA @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) }; snprintf(name, NAME_SIZE, "adc%d", i); - create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000); + create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], + FSL_IMX6UL_ADCn_SIZE); } /* * LCD */ - create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000); + create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, + FSL_IMX6UL_LCDIF_SIZE); /* * ROM memory -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add 4 missing PWM devices Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 59e4dc56e14eccfefd379275ec19048dff9c10b3.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx6ul.h | 2 +- hw/arm/fsl-imx6ul.c | 16 ++++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/include/hw/arm/fsl-imx6ul.h b/include/hw/arm/fsl-imx6ul.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx6ul.h +++ b/include/hw/arm/fsl-imx6ul.h @@ -XXX,XX +XXX,XX @@ enum FslIMX6ULConfiguration { FSL_IMX6UL_NUM_USBS = 2, FSL_IMX6UL_NUM_SAIS = 3, FSL_IMX6UL_NUM_CANS = 2, - FSL_IMX6UL_NUM_PWMS = 4, + FSL_IMX6UL_NUM_PWMS = 8, }; struct FslIMX6ULState { diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx6ul.c +++ b/hw/arm/fsl-imx6ul.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) FSL_IMX6UL_PWM2_ADDR, FSL_IMX6UL_PWM3_ADDR, FSL_IMX6UL_PWM4_ADDR, + FSL_IMX6UL_PWM5_ADDR, + FSL_IMX6UL_PWM6_ADDR, + FSL_IMX6UL_PWM7_ADDR, + FSL_IMX6UL_PWM8_ADDR, }; snprintf(name, NAME_SIZE, "pwm%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx6ul_realize(DeviceState *dev, Error **errp) create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, FSL_IMX6UL_LCDIF_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX6UL_CSU_ADDR, + FSL_IMX6UL_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX6UL_TZASC_ADDR, + FSL_IMX6UL_TZASC_SIZE); + /* * ROM memory */ -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add Addr and size definition for all i.MX7 devices in i.MX7 header file. * Use those newly defined named constants whenever possible. * Standardize the way we init a familly of unimplemented devices - SAI - PWM - CAN * Add/rework few comments Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: 59e195d33e4d486a8d131392acd46633c8c10ed7.1692964892.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 330 ++++++++++++++++++++++++++++---------- hw/arm/fsl-imx7.c | 130 ++++++++++----- 2 files changed, 335 insertions(+), 125 deletions(-) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" -#include "hw/misc/imx6_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ #include "hw/usb/chipidea.h" #include "cpu.h" #include "qom/object.h" +#include "qemu/units.h" #define TYPE_FSL_IMX7 "fsl-imx7" OBJECT_DECLARE_SIMPLE_TYPE(FslIMX7State, FSL_IMX7) @@ -XXX,XX +XXX,XX @@ enum FslIMX7Configuration { FSL_IMX7_NUM_ECSPIS = 4, FSL_IMX7_NUM_USBS = 3, FSL_IMX7_NUM_ADCS = 2, + FSL_IMX7_NUM_SAIS = 3, + FSL_IMX7_NUM_CANS = 2, + FSL_IMX7_NUM_PWMS = 4, }; struct FslIMX7State { @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { enum FslIMX7MemoryMap { FSL_IMX7_MMDC_ADDR = 0x80000000, - FSL_IMX7_MMDC_SIZE = 2 * 1024 * 1024 * 1024UL, + FSL_IMX7_MMDC_SIZE = (2 * GiB), - FSL_IMX7_GPIO1_ADDR = 0x30200000, - FSL_IMX7_GPIO2_ADDR = 0x30210000, - FSL_IMX7_GPIO3_ADDR = 0x30220000, - FSL_IMX7_GPIO4_ADDR = 0x30230000, - FSL_IMX7_GPIO5_ADDR = 0x30240000, - FSL_IMX7_GPIO6_ADDR = 0x30250000, - FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_QSPI1_MEM_ADDR = 0x60000000, + FSL_IMX7_QSPI1_MEM_SIZE = (256 * MiB), - FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + FSL_IMX7_PCIE1_MEM_ADDR = 0x40000000, + FSL_IMX7_PCIE1_MEM_SIZE = (256 * MiB), - FSL_IMX7_WDOG1_ADDR = 0x30280000, - FSL_IMX7_WDOG2_ADDR = 0x30290000, - FSL_IMX7_WDOG3_ADDR = 0x302A0000, - FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_QSPI1_RX_BUF_ADDR = 0x34000000, + FSL_IMX7_QSPI1_RX_BUF_SIZE = (32 * MiB), - FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + /* PCIe Peripherals */ + FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_GPT1_ADDR = 0x302D0000, - FSL_IMX7_GPT2_ADDR = 0x302E0000, - FSL_IMX7_GPT3_ADDR = 0x302F0000, - FSL_IMX7_GPT4_ADDR = 0x30300000, + /* MMAP Peripherals */ + FSL_IMX7_DMA_APBH_ADDR = 0x33000000, + FSL_IMX7_DMA_APBH_SIZE = 0x8000, - FSL_IMX7_IOMUXC_ADDR = 0x30330000, - FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, - FSL_IMX7_IOMUXCn_SIZE = 0x1000, + /* GPV configuration */ + FSL_IMX7_GPV6_ADDR = 0x32600000, + FSL_IMX7_GPV5_ADDR = 0x32500000, + FSL_IMX7_GPV4_ADDR = 0x32400000, + FSL_IMX7_GPV3_ADDR = 0x32300000, + FSL_IMX7_GPV2_ADDR = 0x32200000, + FSL_IMX7_GPV1_ADDR = 0x32100000, + FSL_IMX7_GPV0_ADDR = 0x32000000, + FSL_IMX7_GPVn_SIZE = (1 * MiB), - FSL_IMX7_OCOTP_ADDR = 0x30350000, - FSL_IMX7_OCOTP_SIZE = 0x10000, + /* Arm Peripherals */ + FSL_IMX7_A7MPCORE_ADDR = 0x31000000, - FSL_IMX7_ANALOG_ADDR = 0x30360000, - FSL_IMX7_SNVS_ADDR = 0x30370000, - FSL_IMX7_CCM_ADDR = 0x30380000, + /* AIPS-3 Begin */ - FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = 0x1000, + FSL_IMX7_ENET2_ADDR = 0x30BF0000, + FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ADC1_ADDR = 0x30610000, - FSL_IMX7_ADC2_ADDR = 0x30620000, - FSL_IMX7_ADCn_SIZE = 0x1000, + FSL_IMX7_SDMA_ADDR = 0x30BD0000, + FSL_IMX7_SDMA_SIZE = (4 * KiB), - FSL_IMX7_PWM1_ADDR = 0x30660000, - FSL_IMX7_PWM2_ADDR = 0x30670000, - FSL_IMX7_PWM3_ADDR = 0x30680000, - FSL_IMX7_PWM4_ADDR = 0x30690000, - FSL_IMX7_PWMn_SIZE = 0x10000, + FSL_IMX7_EIM_ADDR = 0x30BC0000, + FSL_IMX7_EIM_SIZE = (4 * KiB), - FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, - FSL_IMX7_PCIE_PHY_SIZE = 0x10000, + FSL_IMX7_QSPI_ADDR = 0x30BB0000, + FSL_IMX7_QSPI_SIZE = 0x8000, - FSL_IMX7_GPC_ADDR = 0x303A0000, + FSL_IMX7_SIM2_ADDR = 0x30BA0000, + FSL_IMX7_SIM1_ADDR = 0x30B90000, + FSL_IMX7_SIMn_SIZE = (4 * KiB), + + FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_USDHC2_ADDR = 0x30B50000, + FSL_IMX7_USDHC1_ADDR = 0x30B40000, + + FSL_IMX7_USB3_ADDR = 0x30B30000, + FSL_IMX7_USBMISC3_ADDR = 0x30B30200, + FSL_IMX7_USB2_ADDR = 0x30B20000, + FSL_IMX7_USBMISC2_ADDR = 0x30B20200, + FSL_IMX7_USB1_ADDR = 0x30B10000, + FSL_IMX7_USBMISC1_ADDR = 0x30B10200, + FSL_IMX7_USBMISCn_SIZE = 0x200, + + FSL_IMX7_USB_PL301_ADDR = 0x30AD0000, + FSL_IMX7_USB_PL301_SIZE = (64 * KiB), + + FSL_IMX7_SEMAPHORE_HS_ADDR = 0x30AC0000, + FSL_IMX7_SEMAPHORE_HS_SIZE = (64 * KiB), + + FSL_IMX7_MUB_ADDR = 0x30AB0000, + FSL_IMX7_MUA_ADDR = 0x30AA0000, + FSL_IMX7_MUn_SIZE = (KiB), + + FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART6_ADDR = 0x30A80000, + FSL_IMX7_UART5_ADDR = 0x30A70000, + FSL_IMX7_UART4_ADDR = 0x30A60000, + + FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_I2C3_ADDR = 0x30A40000, + FSL_IMX7_I2C2_ADDR = 0x30A30000, + FSL_IMX7_I2C1_ADDR = 0x30A20000, + + FSL_IMX7_CAN2_ADDR = 0x30A10000, + FSL_IMX7_CAN1_ADDR = 0x30A00000, + FSL_IMX7_CANn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS3_CONF_ADDR = 0x309F0000, + FSL_IMX7_AIPS3_CONF_SIZE = (64 * KiB), FSL_IMX7_CAAM_ADDR = 0x30900000, - FSL_IMX7_CAAM_SIZE = 0x40000, + FSL_IMX7_CAAM_SIZE = (256 * KiB), - FSL_IMX7_CAN1_ADDR = 0x30A00000, - FSL_IMX7_CAN2_ADDR = 0x30A10000, - FSL_IMX7_CANn_SIZE = 0x10000, + FSL_IMX7_SPBA_ADDR = 0x308F0000, + FSL_IMX7_SPBA_SIZE = (4 * KiB), - FSL_IMX7_I2C1_ADDR = 0x30A20000, - FSL_IMX7_I2C2_ADDR = 0x30A30000, - FSL_IMX7_I2C3_ADDR = 0x30A40000, - FSL_IMX7_I2C4_ADDR = 0x30A50000, + FSL_IMX7_SAI3_ADDR = 0x308C0000, + FSL_IMX7_SAI2_ADDR = 0x308B0000, + FSL_IMX7_SAI1_ADDR = 0x308A0000, + FSL_IMX7_SAIn_SIZE = (4 * KiB), - FSL_IMX7_ECSPI1_ADDR = 0x30820000, - FSL_IMX7_ECSPI2_ADDR = 0x30830000, - FSL_IMX7_ECSPI3_ADDR = 0x30840000, - FSL_IMX7_ECSPI4_ADDR = 0x30630000, - - FSL_IMX7_LCDIF_ADDR = 0x30730000, - FSL_IMX7_LCDIF_SIZE = 0x1000, - - FSL_IMX7_UART1_ADDR = 0x30860000, + FSL_IMX7_UART3_ADDR = 0x30880000, /* * Some versions of the reference manual claim that UART2 is @ * 0x30870000, but experiments with HW + DT files in upstream @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { * actually located @ 0x30890000 */ FSL_IMX7_UART2_ADDR = 0x30890000, - FSL_IMX7_UART3_ADDR = 0x30880000, - FSL_IMX7_UART4_ADDR = 0x30A60000, - FSL_IMX7_UART5_ADDR = 0x30A70000, - FSL_IMX7_UART6_ADDR = 0x30A80000, - FSL_IMX7_UART7_ADDR = 0x30A90000, + FSL_IMX7_UART1_ADDR = 0x30860000, - FSL_IMX7_SAI1_ADDR = 0x308A0000, - FSL_IMX7_SAI2_ADDR = 0x308B0000, - FSL_IMX7_SAI3_ADDR = 0x308C0000, - FSL_IMX7_SAIn_SIZE = 0x10000, + FSL_IMX7_ECSPI3_ADDR = 0x30840000, + FSL_IMX7_ECSPI2_ADDR = 0x30830000, + FSL_IMX7_ECSPI1_ADDR = 0x30820000, + FSL_IMX7_ECSPIn_SIZE = (4 * KiB), - FSL_IMX7_ENET1_ADDR = 0x30BE0000, - FSL_IMX7_ENET2_ADDR = 0x30BF0000, + /* AIPS-3 End */ - FSL_IMX7_USB1_ADDR = 0x30B10000, - FSL_IMX7_USBMISC1_ADDR = 0x30B10200, - FSL_IMX7_USB2_ADDR = 0x30B20000, - FSL_IMX7_USBMISC2_ADDR = 0x30B20200, - FSL_IMX7_USB3_ADDR = 0x30B30000, - FSL_IMX7_USBMISC3_ADDR = 0x30B30200, - FSL_IMX7_USBMISCn_SIZE = 0x200, + /* AIPS-2 Begin */ - FSL_IMX7_USDHC1_ADDR = 0x30B40000, - FSL_IMX7_USDHC2_ADDR = 0x30B50000, - FSL_IMX7_USDHC3_ADDR = 0x30B60000, + FSL_IMX7_AXI_DEBUG_MON_ADDR = 0x307E0000, + FSL_IMX7_AXI_DEBUG_MON_SIZE = (64 * KiB), - FSL_IMX7_SDMA_ADDR = 0x30BD0000, - FSL_IMX7_SDMA_SIZE = 0x1000, + FSL_IMX7_PERFMON2_ADDR = 0x307D0000, + FSL_IMX7_PERFMON1_ADDR = 0x307C0000, + FSL_IMX7_PERFMONn_SIZE = (64 * KiB), + + FSL_IMX7_DDRC_ADDR = 0x307A0000, + FSL_IMX7_DDRC_SIZE = (4 * KiB), + + FSL_IMX7_DDRC_PHY_ADDR = 0x30790000, + FSL_IMX7_DDRC_PHY_SIZE = (4 * KiB), + + FSL_IMX7_TZASC_ADDR = 0x30780000, + FSL_IMX7_TZASC_SIZE = (64 * KiB), + + FSL_IMX7_MIPI_DSI_ADDR = 0x30760000, + FSL_IMX7_MIPI_DSI_SIZE = (4 * KiB), + + FSL_IMX7_MIPI_CSI_ADDR = 0x30750000, + FSL_IMX7_MIPI_CSI_SIZE = 0x4000, + + FSL_IMX7_LCDIF_ADDR = 0x30730000, + FSL_IMX7_LCDIF_SIZE = 0x8000, + + FSL_IMX7_CSI_ADDR = 0x30710000, + FSL_IMX7_CSI_SIZE = (4 * KiB), + + FSL_IMX7_PXP_ADDR = 0x30700000, + FSL_IMX7_PXP_SIZE = 0x4000, + + FSL_IMX7_EPDC_ADDR = 0x306F0000, + FSL_IMX7_EPDC_SIZE = (4 * KiB), + + FSL_IMX7_PCIE_PHY_ADDR = 0x306D0000, + FSL_IMX7_PCIE_PHY_SIZE = (4 * KiB), + + FSL_IMX7_SYSCNT_CTRL_ADDR = 0x306C0000, + FSL_IMX7_SYSCNT_CMP_ADDR = 0x306B0000, + FSL_IMX7_SYSCNT_RD_ADDR = 0x306A0000, + + FSL_IMX7_PWM4_ADDR = 0x30690000, + FSL_IMX7_PWM3_ADDR = 0x30680000, + FSL_IMX7_PWM2_ADDR = 0x30670000, + FSL_IMX7_PWM1_ADDR = 0x30660000, + FSL_IMX7_PWMn_SIZE = (4 * KiB), + + FSL_IMX7_FlEXTIMER2_ADDR = 0x30650000, + FSL_IMX7_FlEXTIMER1_ADDR = 0x30640000, + FSL_IMX7_FLEXTIMERn_SIZE = (4 * KiB), + + FSL_IMX7_ECSPI4_ADDR = 0x30630000, + + FSL_IMX7_ADC2_ADDR = 0x30620000, + FSL_IMX7_ADC1_ADDR = 0x30610000, + FSL_IMX7_ADCn_SIZE = (4 * KiB), + + FSL_IMX7_AIPS2_CONF_ADDR = 0x305F0000, + FSL_IMX7_AIPS2_CONF_SIZE = (64 * KiB), + + /* AIPS-2 End */ + + /* AIPS-1 Begin */ + + FSL_IMX7_CSU_ADDR = 0x303E0000, + FSL_IMX7_CSU_SIZE = (64 * KiB), + + FSL_IMX7_RDC_ADDR = 0x303D0000, + FSL_IMX7_RDC_SIZE = (4 * KiB), + + FSL_IMX7_SEMAPHORE2_ADDR = 0x303C0000, + FSL_IMX7_SEMAPHORE1_ADDR = 0x303B0000, + FSL_IMX7_SEMAPHOREn_SIZE = (4 * KiB), + + FSL_IMX7_GPC_ADDR = 0x303A0000, + + FSL_IMX7_SRC_ADDR = 0x30390000, + FSL_IMX7_SRC_SIZE = (4 * KiB), + + FSL_IMX7_CCM_ADDR = 0x30380000, + + FSL_IMX7_SNVS_HP_ADDR = 0x30370000, + + FSL_IMX7_ANALOG_ADDR = 0x30360000, + + FSL_IMX7_OCOTP_ADDR = 0x30350000, + FSL_IMX7_OCOTP_SIZE = 0x10000, + + FSL_IMX7_IOMUXC_GPR_ADDR = 0x30340000, + FSL_IMX7_IOMUXC_GPR_SIZE = (4 * KiB), + + FSL_IMX7_IOMUXC_ADDR = 0x30330000, + FSL_IMX7_IOMUXC_SIZE = (4 * KiB), + + FSL_IMX7_KPP_ADDR = 0x30320000, + FSL_IMX7_KPP_SIZE = (4 * KiB), + + FSL_IMX7_ROMCP_ADDR = 0x30310000, + FSL_IMX7_ROMCP_SIZE = (4 * KiB), + + FSL_IMX7_GPT4_ADDR = 0x30300000, + FSL_IMX7_GPT3_ADDR = 0x302F0000, + FSL_IMX7_GPT2_ADDR = 0x302E0000, + FSL_IMX7_GPT1_ADDR = 0x302D0000, + + FSL_IMX7_IOMUXC_LPSR_ADDR = 0x302C0000, + FSL_IMX7_IOMUXC_LPSR_SIZE = (4 * KiB), + + FSL_IMX7_WDOG4_ADDR = 0x302B0000, + FSL_IMX7_WDOG3_ADDR = 0x302A0000, + FSL_IMX7_WDOG2_ADDR = 0x30290000, + FSL_IMX7_WDOG1_ADDR = 0x30280000, + + FSL_IMX7_IOMUXC_LPSR_GPR_ADDR = 0x30270000, + + FSL_IMX7_GPIO7_ADDR = 0x30260000, + FSL_IMX7_GPIO6_ADDR = 0x30250000, + FSL_IMX7_GPIO5_ADDR = 0x30240000, + FSL_IMX7_GPIO4_ADDR = 0x30230000, + FSL_IMX7_GPIO3_ADDR = 0x30220000, + FSL_IMX7_GPIO2_ADDR = 0x30210000, + FSL_IMX7_GPIO1_ADDR = 0x30200000, + + FSL_IMX7_AIPS1_CONF_ADDR = 0x301F0000, + FSL_IMX7_AIPS1_CONF_SIZE = (64 * KiB), - FSL_IMX7_A7MPCORE_ADDR = 0x31000000, FSL_IMX7_A7MPCORE_DAP_ADDR = 0x30000000, + FSL_IMX7_A7MPCORE_DAP_SIZE = (1 * MiB), - FSL_IMX7_PCIE_REG_ADDR = 0x33800000, - FSL_IMX7_PCIE_REG_SIZE = 16 * 1024, + /* AIPS-1 End */ - FSL_IMX7_GPR_ADDR = 0x30340000, + FSL_IMX7_EIM_CS0_ADDR = 0x28000000, + FSL_IMX7_EIM_CS0_SIZE = (128 * MiB), - FSL_IMX7_DMA_APBH_ADDR = 0x33000000, - FSL_IMX7_DMA_APBH_SIZE = 0x2000, + FSL_IMX7_OCRAM_PXP_ADDR = 0x00940000, + FSL_IMX7_OCRAM_PXP_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_EPDC_ADDR = 0x00920000, + FSL_IMX7_OCRAM_EPDC_SIZE = (128 * KiB), + + FSL_IMX7_OCRAM_MEM_ADDR = 0x00900000, + FSL_IMX7_OCRAM_MEM_SIZE = (128 * KiB), + + FSL_IMX7_TCMU_ADDR = 0x00800000, + FSL_IMX7_TCMU_SIZE = (32 * KiB), + + FSL_IMX7_TCML_ADDR = 0x007F8000, + FSL_IMX7_TCML_SIZE = (32 * KiB), + + FSL_IMX7_OCRAM_S_ADDR = 0x00180000, + FSL_IMX7_OCRAM_S_SIZE = (32 * KiB), + + FSL_IMX7_CAAM_MEM_ADDR = 0x00100000, + FSL_IMX7_CAAM_MEM_SIZE = (32 * KiB), + + FSL_IMX7_ROM_ADDR = 0x00000000, + FSL_IMX7_ROM_SIZE = (96 * KiB), }; enum FslIMX7IRQs { diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) char name[NAME_SIZE]; int i; + /* + * CPUs + */ for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX7_NUM_CPUS); i++) { snprintf(name, NAME_SIZE, "cpu%d", i); object_initialize_child(obj, name, &s->cpu[i], @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) TYPE_A15MPCORE_PRIV); /* - * GPIOs 1 to 7 + * GPIOs */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { snprintf(name, NAME_SIZE, "gpio%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { snprintf(name, NAME_SIZE, "gpt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { snprintf(name, NAME_SIZE, "spi%d", i + 1); object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); } - + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { snprintf(name, NAME_SIZE, "i2c%d", i + 1); object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { snprintf(name, NAME_SIZE, "uart%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * Ethernet + * Ethernets */ for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) { snprintf(name, NAME_SIZE, "eth%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) } /* - * SDHCI + * SDHCIs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { snprintf(name, NAME_SIZE, "usdhc%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { snprintf(name, NAME_SIZE, "wdt%d", i); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR); + /* + * PCIE + */ object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { snprintf(name, NAME_SIZE, "usb%d", i); object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) return; } + /* + * CPUs + */ for (i = 0; i < smp_cpus; i++) { o = OBJECT(&s->cpu[i]); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * A7MPCORE DAP */ create_unimplemented_device("a7mpcore-dap", FSL_IMX7_A7MPCORE_DAP_ADDR, - 0x100000); + FSL_IMX7_A7MPCORE_DAP_SIZE); /* - * GPT1, 2, 3, 4 + * GPTs */ for (i = 0; i < FSL_IMX7_NUM_GPTS; i++) { static const hwaddr FSL_IMX7_GPTn_ADDR[FSL_IMX7_NUM_GPTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_GPTn_IRQ[i])); } + /* + * GPIOs + */ for (i = 0; i < FSL_IMX7_NUM_GPIOS; i++) { static const hwaddr FSL_IMX7_GPIOn_ADDR[FSL_IMX7_NUM_GPIOS] = { FSL_IMX7_GPIO1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * IOMUXC and IOMUXC_LPSR */ - for (i = 0; i < FSL_IMX7_NUM_IOMUXCS; i++) { - static const hwaddr FSL_IMX7_IOMUXCn_ADDR[FSL_IMX7_NUM_IOMUXCS] = { - FSL_IMX7_IOMUXC_ADDR, - FSL_IMX7_IOMUXC_LPSR_ADDR, - }; - - snprintf(name, NAME_SIZE, "iomuxc%d", i); - create_unimplemented_device(name, FSL_IMX7_IOMUXCn_ADDR[i], - FSL_IMX7_IOMUXCn_SIZE); - } + create_unimplemented_device("iomuxc", FSL_IMX7_IOMUXC_ADDR, + FSL_IMX7_IOMUXC_SIZE); + create_unimplemented_device("iomuxc_lspr", FSL_IMX7_IOMUXC_LPSR_ADDR, + FSL_IMX7_IOMUXC_LPSR_SIZE); /* * CCM @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX7_GPC_ADDR); - /* Initialize all ECSPI */ + /* + * ECSPIs + */ for (i = 0; i < FSL_IMX7_NUM_ECSPIS; i++) { static const hwaddr FSL_IMX7_SPIn_ADDR[FSL_IMX7_NUM_ECSPIS] = { FSL_IMX7_ECSPI1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) FSL_IMX7_SPIn_IRQ[i])); } + /* + * I2Cs + */ for (i = 0; i < FSL_IMX7_NUM_I2CS; i++) { static const hwaddr FSL_IMX7_I2Cn_ADDR[FSL_IMX7_NUM_I2CS] = { FSL_IMX7_I2C1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * UART + * UARTs */ for (i = 0; i < FSL_IMX7_NUM_UARTS; i++) { static const hwaddr FSL_IMX7_UARTn_ADDR[FSL_IMX7_NUM_UARTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * Ethernet + * Ethernets * * We must use two loops since phy_connected affects the other interface * and we have to set all properties before calling sysbus_realize(). @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) } /* - * USDHC + * USDHCs */ for (i = 0; i < FSL_IMX7_NUM_USDHCS; i++) { static const hwaddr FSL_IMX7_USDHCn_ADDR[FSL_IMX7_NUM_USDHCS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) * SNVS */ sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX7_SNVS_HP_ADDR); /* * SRC @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); /* - * Watchdog + * Watchdogs */ for (i = 0; i < FSL_IMX7_NUM_WDTS; i++) { static const hwaddr FSL_IMX7_WDOGn_ADDR[FSL_IMX7_NUM_WDTS] = { @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("caam", FSL_IMX7_CAAM_ADDR, FSL_IMX7_CAAM_SIZE); /* - * PWM + * PWMs */ - create_unimplemented_device("pwm1", FSL_IMX7_PWM1_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm2", FSL_IMX7_PWM2_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm3", FSL_IMX7_PWM3_ADDR, FSL_IMX7_PWMn_SIZE); - create_unimplemented_device("pwm4", FSL_IMX7_PWM4_ADDR, FSL_IMX7_PWMn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_PWMS; i++) { + static const hwaddr FSL_IMX7_PWMn_ADDR[FSL_IMX7_NUM_PWMS] = { + FSL_IMX7_PWM1_ADDR, + FSL_IMX7_PWM2_ADDR, + FSL_IMX7_PWM3_ADDR, + FSL_IMX7_PWM4_ADDR, + }; + + snprintf(name, NAME_SIZE, "pwm%d", i); + create_unimplemented_device(name, FSL_IMX7_PWMn_ADDR[i], + FSL_IMX7_PWMn_SIZE); + } /* - * CAN + * CANs */ - create_unimplemented_device("can1", FSL_IMX7_CAN1_ADDR, FSL_IMX7_CANn_SIZE); - create_unimplemented_device("can2", FSL_IMX7_CAN2_ADDR, FSL_IMX7_CANn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_CANS; i++) { + static const hwaddr FSL_IMX7_CANn_ADDR[FSL_IMX7_NUM_CANS] = { + FSL_IMX7_CAN1_ADDR, + FSL_IMX7_CAN2_ADDR, + }; + + snprintf(name, NAME_SIZE, "can%d", i); + create_unimplemented_device(name, FSL_IMX7_CANn_ADDR[i], + FSL_IMX7_CANn_SIZE); + } /* - * SAI (Audio SSI (Synchronous Serial Interface)) + * SAIs (Audio SSI (Synchronous Serial Interface)) */ - create_unimplemented_device("sai1", FSL_IMX7_SAI1_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI2_ADDR, FSL_IMX7_SAIn_SIZE); - create_unimplemented_device("sai2", FSL_IMX7_SAI3_ADDR, FSL_IMX7_SAIn_SIZE); + for (i = 0; i < FSL_IMX7_NUM_SAIS; i++) { + static const hwaddr FSL_IMX7_SAIn_ADDR[FSL_IMX7_NUM_SAIS] = { + FSL_IMX7_SAI1_ADDR, + FSL_IMX7_SAI2_ADDR, + FSL_IMX7_SAI3_ADDR, + }; + + snprintf(name, NAME_SIZE, "sai%d", i); + create_unimplemented_device(name, FSL_IMX7_SAIn_ADDR[i], + FSL_IMX7_SAIn_SIZE); + } /* * OCOTP @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("ocotp", FSL_IMX7_OCOTP_ADDR, FSL_IMX7_OCOTP_SIZE); + /* + * GPR + */ sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort); - sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_GPR_ADDR); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX7_IOMUXC_GPR_ADDR); + /* + * PCIE + */ sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort); sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX7_PCIE_REG_ADDR); @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) irq = qdev_get_gpio_in(DEVICE(&s->a7mpcore), FSL_IMX7_PCI_INTD_IRQ); sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq); - + /* + * USBs + */ for (i = 0; i < FSL_IMX7_NUM_USBS; i++) { static const hwaddr FSL_IMX7_USBMISCn_ADDR[FSL_IMX7_NUM_USBS] = { FSL_IMX7_USBMISC1_ADDR, @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) */ create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> * Add TZASC as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add CSU as unimplemented device. - Allow bare metal application to access this (unimplemented) device * Add various memory segments - OCRAM - OCRAM EPDC - OCRAM PXP - OCRAM S - ROM - CAAM Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: f887a3483996ba06d40bd62ffdfb0ecf68621987.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 7 +++++ hw/arm/fsl-imx7.c | 63 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7GPRState gpr; ChipideaState usb[FSL_IMX7_NUM_USBS]; DesignwarePCIEHost pcie; + MemoryRegion rom; + MemoryRegion caam; + MemoryRegion ocram; + MemoryRegion ocram_epdc; + MemoryRegion ocram_pxp; + MemoryRegion ocram_s; + uint32_t phy_num[FSL_IMX7_NUM_ETHS]; bool phy_connected[FSL_IMX7_NUM_ETHS]; }; diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) create_unimplemented_device("pcie-phy", FSL_IMX7_PCIE_PHY_ADDR, FSL_IMX7_PCIE_PHY_SIZE); + /* + * CSU + */ + create_unimplemented_device("csu", FSL_IMX7_CSU_ADDR, + FSL_IMX7_CSU_SIZE); + + /* + * TZASC + */ + create_unimplemented_device("tzasc", FSL_IMX7_TZASC_ADDR, + FSL_IMX7_TZASC_SIZE); + + /* + * OCRAM memory + */ + memory_region_init_ram(&s->ocram, NULL, "imx7.ocram", + FSL_IMX7_OCRAM_MEM_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_MEM_ADDR, + &s->ocram); + + /* + * OCRAM EPDC memory + */ + memory_region_init_ram(&s->ocram_epdc, NULL, "imx7.ocram_epdc", + FSL_IMX7_OCRAM_EPDC_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_EPDC_ADDR, + &s->ocram_epdc); + + /* + * OCRAM PXP memory + */ + memory_region_init_ram(&s->ocram_pxp, NULL, "imx7.ocram_pxp", + FSL_IMX7_OCRAM_PXP_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_PXP_ADDR, + &s->ocram_pxp); + + /* + * OCRAM_S memory + */ + memory_region_init_ram(&s->ocram_s, NULL, "imx7.ocram_s", + FSL_IMX7_OCRAM_S_SIZE, + &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_OCRAM_S_ADDR, + &s->ocram_s); + + /* + * ROM memory + */ + memory_region_init_rom(&s->rom, OBJECT(dev), "imx7.rom", + FSL_IMX7_ROM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_ROM_ADDR, + &s->rom); + + /* + * CAAM memory + */ + memory_region_init_rom(&s->caam, OBJECT(dev), "imx7.caam", + FSL_IMX7_CAAM_MEM_SIZE, &error_abort); + memory_region_add_subregion(get_system_memory(), FSL_IMX7_CAAM_MEM_ADDR, + &s->caam); } static Property fsl_imx7_properties[] = { -- 2.34.1 From: Jean-Christophe Dubois <jcd@tribudubois.net> The SRC device is normally used to start the secondary CPU. When running Linux directly, QEMU is emulating a PSCI interface that UBOOT is installing at boot time and therefore the fact that the SRC device is unimplemented is hidden as Qemu respond directly to PSCI requets without using the SRC device. But if you try to run a more bare metal application (maybe uboot itself), then it is not possible to start the secondary CPU as the SRC is an unimplemented device. This patch adds the ability to start the secondary CPU through the SRC device so that you can use this feature in bare metal applications. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: ce9a0162defd2acee5dc7f8a674743de0cded569.1692964892.git.jcd@tribudubois.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- include/hw/arm/fsl-imx7.h | 3 +- include/hw/misc/imx7_src.h | 66 +++++++++ hw/arm/fsl-imx7.c | 8 +- hw/misc/imx7_src.c | 276 +++++++++++++++++++++++++++++++++++++ hw/misc/meson.build | 1 + hw/misc/trace-events | 4 + 6 files changed, 356 insertions(+), 2 deletions(-) create mode 100644 include/hw/misc/imx7_src.h create mode 100644 hw/misc/imx7_src.c diff --git a/include/hw/arm/fsl-imx7.h b/include/hw/arm/fsl-imx7.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/fsl-imx7.h +++ b/include/hw/arm/fsl-imx7.h @@ -XXX,XX +XXX,XX @@ #include "hw/misc/imx7_ccm.h" #include "hw/misc/imx7_snvs.h" #include "hw/misc/imx7_gpr.h" +#include "hw/misc/imx7_src.h" #include "hw/watchdog/wdt_imx2.h" #include "hw/gpio/imx_gpio.h" #include "hw/char/imx_serial.h" @@ -XXX,XX +XXX,XX @@ struct FslIMX7State { IMX7CCMState ccm; IMX7AnalogState analog; IMX7SNVSState snvs; + IMX7SRCState src; IMXGPCv2State gpcv2; IMXSPIState spi[FSL_IMX7_NUM_ECSPIS]; IMXI2CState i2c[FSL_IMX7_NUM_I2CS]; @@ -XXX,XX +XXX,XX @@ enum FslIMX7MemoryMap { FSL_IMX7_GPC_ADDR = 0x303A0000, FSL_IMX7_SRC_ADDR = 0x30390000, - FSL_IMX7_SRC_SIZE = (4 * KiB), FSL_IMX7_CCM_ADDR = 0x30380000, diff --git a/include/hw/misc/imx7_src.h b/include/hw/misc/imx7_src.h new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/include/hw/misc/imx7_src.h @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (C) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#ifndef IMX7_SRC_H +#define IMX7_SRC_H + +#include "hw/sysbus.h" +#include "qemu/bitops.h" +#include "qom/object.h" + +#define SRC_SCR 0 +#define SRC_A7RCR0 1 +#define SRC_A7RCR1 2 +#define SRC_M4RCR 3 +#define SRC_ERCR 5 +#define SRC_HSICPHY_RCR 7 +#define SRC_USBOPHY1_RCR 8 +#define SRC_USBOPHY2_RCR 9 +#define SRC_MPIPHY_RCR 10 +#define SRC_PCIEPHY_RCR 11 +#define SRC_SBMR1 22 +#define SRC_SRSR 23 +#define SRC_SISR 26 +#define SRC_SIMR 27 +#define SRC_SBMR2 28 +#define SRC_GPR1 29 +#define SRC_GPR2 30 +#define SRC_GPR3 31 +#define SRC_GPR4 32 +#define SRC_GPR5 33 +#define SRC_GPR6 34 +#define SRC_GPR7 35 +#define SRC_GPR8 36 +#define SRC_GPR9 37 +#define SRC_GPR10 38 +#define SRC_MAX 39 + +/* SRC_A7SCR1 */ +#define R_CORE1_ENABLE_SHIFT 1 +#define R_CORE1_ENABLE_LENGTH 1 +/* SRC_A7SCR0 */ +#define R_CORE1_RST_SHIFT 5 +#define R_CORE1_RST_LENGTH 1 +#define R_CORE0_RST_SHIFT 4 +#define R_CORE0_RST_LENGTH 1 + +#define TYPE_IMX7_SRC "imx7.src" +OBJECT_DECLARE_SIMPLE_TYPE(IMX7SRCState, IMX7_SRC) + +struct IMX7SRCState { + /* <private> */ + SysBusDevice parent_obj; + + /* <public> */ + MemoryRegion iomem; + + uint32_t regs[SRC_MAX]; +}; + +#endif /* IMX7_SRC_H */ diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/fsl-imx7.c +++ b/hw/arm/fsl-imx7.c @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_init(Object *obj) */ object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2); + /* + * SRC + */ + object_initialize_child(obj, "src", &s->src, TYPE_IMX7_SRC); + /* * ECSPIs */ @@ -XXX,XX +XXX,XX @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp) /* * SRC */ - create_unimplemented_device("src", FSL_IMX7_SRC_ADDR, FSL_IMX7_SRC_SIZE); + sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort); + sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX7_SRC_ADDR); /* * Watchdogs diff --git a/hw/misc/imx7_src.c b/hw/misc/imx7_src.c new file mode 100644 index XXXXXXX..XXXXXXX --- /dev/null +++ b/hw/misc/imx7_src.c @@ -XXX,XX +XXX,XX @@ +/* + * IMX7 System Reset Controller + * + * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "hw/misc/imx7_src.h" +#include "migration/vmstate.h" +#include "qemu/bitops.h" +#include "qemu/log.h" +#include "qemu/main-loop.h" +#include "qemu/module.h" +#include "target/arm/arm-powerctl.h" +#include "hw/core/cpu.h" +#include "hw/registerfields.h" + +#include "trace.h" + +static const char *imx7_src_reg_name(uint32_t reg) +{ + static char unknown[20]; + + switch (reg) { + case SRC_SCR: + return "SRC_SCR"; + case SRC_A7RCR0: + return "SRC_A7RCR0"; + case SRC_A7RCR1: + return "SRC_A7RCR1"; + case SRC_M4RCR: + return "SRC_M4RCR"; + case SRC_ERCR: + return "SRC_ERCR"; + case SRC_HSICPHY_RCR: + return "SRC_HSICPHY_RCR"; + case SRC_USBOPHY1_RCR: + return "SRC_USBOPHY1_RCR"; + case SRC_USBOPHY2_RCR: + return "SRC_USBOPHY2_RCR"; + case SRC_PCIEPHY_RCR: + return "SRC_PCIEPHY_RCR"; + case SRC_SBMR1: + return "SRC_SBMR1"; + case SRC_SRSR: + return "SRC_SRSR"; + case SRC_SISR: + return "SRC_SISR"; + case SRC_SIMR: + return "SRC_SIMR"; + case SRC_SBMR2: + return "SRC_SBMR2"; + case SRC_GPR1: + return "SRC_GPR1"; + case SRC_GPR2: + return "SRC_GPR2"; + case SRC_GPR3: + return "SRC_GPR3"; + case SRC_GPR4: + return "SRC_GPR4"; + case SRC_GPR5: + return "SRC_GPR5"; + case SRC_GPR6: + return "SRC_GPR6"; + case SRC_GPR7: + return "SRC_GPR7"; + case SRC_GPR8: + return "SRC_GPR8"; + case SRC_GPR9: + return "SRC_GPR9"; + case SRC_GPR10: + return "SRC_GPR10"; + default: + sprintf(unknown, "%u ?", reg); + return unknown; + } +} + +static const VMStateDescription vmstate_imx7_src = { + .name = TYPE_IMX7_SRC, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]) { + VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), + VMSTATE_END_OF_LIST() + }, +}; + +static void imx7_src_reset(DeviceState *dev) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memset(s->regs, 0, sizeof(s->regs)); + + /* Set reset values */ + s->regs[SRC_SCR] = 0xA0; + s->regs[SRC_SRSR] = 0x1; + s->regs[SRC_SIMR] = 0x1F; +} + +static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) +{ + uint32_t value = 0; + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + + if (index < SRC_MAX) { + value = s->regs[index]; + } else { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + } + + trace_imx7_src_read(imx7_src_reg_name(index), value); + + return value; +} + + +/* + * The reset is asynchronous so we need to defer clearing the reset + * bit until the work is completed. + */ + +struct SRCSCRResetInfo { + IMX7SRCState *s; + uint32_t reset_bit; +}; + +static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) +{ + struct SRCSCRResetInfo *ri = data.host_ptr; + IMX7SRCState *s = ri->s; + + assert(qemu_mutex_iothread_locked()); + + s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + g_free(ri); +} + +static void imx7_defer_clear_reset_bit(uint32_t cpuid, + IMX7SRCState *s, + uint32_t reset_shift) +{ + struct SRCSCRResetInfo *ri; + CPUState *cpu = arm_get_cpu_by_id(cpuid); + + if (!cpu) { + return; + } + + ri = g_new(struct SRCSCRResetInfo, 1); + ri->s = s; + ri->reset_bit = reset_shift; + + async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); +} + + +static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, + unsigned size) +{ + IMX7SRCState *s = (IMX7SRCState *)opaque; + uint32_t index = offset >> 2; + long unsigned int change_mask; + uint32_t current_value = value; + + if (index >= SRC_MAX) { + qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" + HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); + return; + } + + trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); + + change_mask = s->regs[index] ^ (uint32_t)current_value; + + switch (index) { + case SRC_A7RCR0: + if (FIELD_EX32(change_mask, CORE0, RST)) { + arm_reset_cpu(0); + imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); + } + if (FIELD_EX32(change_mask, CORE1, RST)) { + arm_reset_cpu(1); + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + } + s->regs[index] = current_value; + break; + case SRC_A7RCR1: + /* + * On real hardware when the system reset controller starts a + * secondary CPU it runs through some boot ROM code which reads + * the SRC_GPRX registers controlling the start address and branches + * to it. + * Here we are taking a short cut and branching directly to the + * requested address (we don't want to run the boot ROM code inside + * QEMU) + */ + if (FIELD_EX32(change_mask, CORE1, ENABLE)) { + if (FIELD_EX32(current_value, CORE1, ENABLE)) { + /* CORE 1 is brought up */ + arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], + 3, false); + } else { + /* CORE 1 is shut down */ + arm_set_cpu_off(1); + } + /* We clear the reset bits as the processor changed state */ + imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); + clear_bit(R_CORE1_RST_SHIFT, &change_mask); + } + s->regs[index] = current_value; + break; + default: + s->regs[index] = current_value; + break; + } +} + +static const struct MemoryRegionOps imx7_src_ops = { + .read = imx7_src_read, + .write = imx7_src_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .valid = { + /* + * Our device would not work correctly if the guest was doing + * unaligned access. This might not be a limitation on the real + * device but in practice there is no reason for a guest to access + * this device unaligned. + */ + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void imx7_src_realize(DeviceState *dev, Error **errp) +{ + IMX7SRCState *s = IMX7_SRC(dev); + + memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, + TYPE_IMX7_SRC, 0x1000); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); +} + +static void imx7_src_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = imx7_src_realize; + dc->reset = imx7_src_reset; + dc->vmsd = &vmstate_imx7_src; + dc->desc = "i.MX6 System Reset Controller"; +} + +static const TypeInfo imx7_src_info = { + .name = TYPE_IMX7_SRC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(IMX7SRCState), + .class_init = imx7_src_class_init, +}; + +static void imx7_src_register_types(void) +{ + type_register_static(&imx7_src_info); +} + +type_init(imx7_src_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -XXX,XX +XXX,XX @@ system_ss.add(when: 'CONFIG_IMX', if_true: files( 'imx6_src.c', 'imx6ul_ccm.c', 'imx7_ccm.c', + 'imx7_src.c', 'imx7_gpr.c', 'imx7_snvs.c', 'imx_ccm.c', diff --git a/hw/misc/trace-events b/hw/misc/trace-events index XXXXXXX..XXXXXXX 100644 --- a/hw/misc/trace-events +++ b/hw/misc/trace-events @@ -XXX,XX +XXX,XX @@ ccm_clock_freq(uint32_t clock, uint32_t freq) "(Clock = %d) = %d" ccm_read_reg(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 ccm_write_reg(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +# imx7_src.c +imx7_src_read(const char *reg_name, uint32_t value) "reg[%s] => 0x%" PRIx32 +imx7_src_write(const char *reg_name, uint32_t value) "reg[%s] <= 0x%" PRIx32 + # iotkit-sysinfo.c iotkit_sysinfo_read(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" iotkit_sysinfo_write(uint64_t offset, uint64_t data, unsigned size) "IoTKit SysInfo write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" -- 2.34.1 The architecture requires (R_TYTWB) that an attempt to return from EL3 when SCR_EL3.{NSE,NS} are {1,0} is an illegal exception return. (This enforces that the CPU can't ever be executing below EL3 with the NSE,NS bits indicating an invalid security state.) We were missing this check; add it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230807150618.101357-1-peter.maydell@linaro.org --- target/arm/tcg/helper-a64.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/target/arm/tcg/helper-a64.c b/target/arm/tcg/helper-a64.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/tcg/helper-a64.c +++ b/target/arm/tcg/helper-a64.c @@ -XXX,XX +XXX,XX @@ void HELPER(exception_return)(CPUARMState *env, uint64_t new_pc) spsr &= ~PSTATE_SS; } + /* + * FEAT_RME forbids return from EL3 with an invalid security state. + * We don't need an explicit check for FEAT_RME here because we enforce + * in scr_write() that you can't set the NSE bit without it. + */ + if (cur_el == 3 && (env->cp15.scr_el3 & (SCR_NS | SCR_NSE)) == SCR_NSE) { + goto illegal_return; + } + new_el = el_from_spsr(spsr); if (new_el == -1) { goto illegal_return; -- 2.34.1 In the m48t59 device we almost always use 64-bit arithmetic when dealing with time_t deltas. The one exception is in set_alarm(), which currently uses a plain 'int' to hold the difference between two time_t values. Switch to int64_t instead to avoid any possible overflow issues. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/m48t59.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/hw/rtc/m48t59.c b/hw/rtc/m48t59.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/m48t59.c +++ b/hw/rtc/m48t59.c @@ -XXX,XX +XXX,XX @@ static void alarm_cb (void *opaque) static void set_alarm(M48t59State *NVRAM) { - int diff; + int64_t diff; if (NVRAM->alrm_timer != NULL) { timer_del(NVRAM->alrm_timer); diff = qemu_timedate_diff(&NVRAM->alarm) - NVRAM->time_offset; -- 2.34.1 In the twl92230 device, use int64_t for the two state fields sec_offset and alm_sec, because we set these to values that are either time_t or differences between two time_t values. These fields aren't saved in vmstate anywhere, so we can safely widen them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/rtc/twl92230.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hw/rtc/twl92230.c b/hw/rtc/twl92230.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/twl92230.c +++ b/hw/rtc/twl92230.c @@ -XXX,XX +XXX,XX @@ struct MenelausState { struct tm tm; struct tm new; struct tm alm; - int sec_offset; - int alm_sec; + int64_t sec_offset; + int64_t alm_sec; int next_comp; } rtc; uint16_t rtc_next_vmstate; -- 2.34.1 In the aspeed_rtc device we store a difference between two time_t values in an 'int'. This is not really correct when time_t could be 64 bits. Enlarge the field to 'int64_t'. This is a migration compatibility break for the aspeed boards. While we are changing the vmstate, remove the accidental duplicate of the offset field. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> --- include/hw/rtc/aspeed_rtc.h | 2 +- hw/rtc/aspeed_rtc.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/hw/rtc/aspeed_rtc.h b/include/hw/rtc/aspeed_rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/rtc/aspeed_rtc.h +++ b/include/hw/rtc/aspeed_rtc.h @@ -XXX,XX +XXX,XX @@ struct AspeedRtcState { qemu_irq irq; uint32_t reg[0x18]; - int offset; + int64_t offset; }; diff --git a/hw/rtc/aspeed_rtc.c b/hw/rtc/aspeed_rtc.c index XXXXXXX..XXXXXXX 100644 --- a/hw/rtc/aspeed_rtc.c +++ b/hw/rtc/aspeed_rtc.c @@ -XXX,XX +XXX,XX @@ static const MemoryRegionOps aspeed_rtc_ops = { static const VMStateDescription vmstate_aspeed_rtc = { .name = TYPE_ASPEED_RTC, - .version_id = 1, + .version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32_ARRAY(reg, AspeedRtcState, 0x18), - VMSTATE_INT32(offset, AspeedRtcState), - VMSTATE_INT32(offset, AspeedRtcState), + VMSTATE_INT64(offset, AspeedRtcState), VMSTATE_END_OF_LIST() } }; -- 2.34.1 The functions qemu_get_timedate() and qemu_timedate_diff() take and return a time offset as an integer. Coverity points out that means that when an RTC device implementation holds an offset as a time_t, as the m48t59 does, the time_t will get truncated. (CID 1507157, 1517772). The functions work with time_t internally, so make them use that type in their APIs. Note that this won't help any Y2038 issues where either the device model itself is keeping the offset in a 32-bit integer, or where the hardware under emulation has Y2038 or other rollover problems. If we missed any cases of the former then hopefully Coverity will warn us about them since after this patch we'd be truncating a time_t in assignments from qemu_timedate_diff().) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- include/sysemu/rtc.h | 4 ++-- softmmu/rtc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/include/sysemu/rtc.h b/include/sysemu/rtc.h index XXXXXXX..XXXXXXX 100644 --- a/include/sysemu/rtc.h +++ b/include/sysemu/rtc.h @@ -XXX,XX +XXX,XX @@ * The behaviour of the clock whose value this function returns will * depend on the -rtc command line option passed by the user. */ -void qemu_get_timedate(struct tm *tm, int offset); +void qemu_get_timedate(struct tm *tm, time_t offset); /** * qemu_timedate_diff: Return difference between a struct tm and the RTC @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset); * a timestamp one hour further ahead than the current RTC time * then this function will return 3600. */ -int qemu_timedate_diff(struct tm *tm); +time_t qemu_timedate_diff(struct tm *tm); #endif diff --git a/softmmu/rtc.c b/softmmu/rtc.c index XXXXXXX..XXXXXXX 100644 --- a/softmmu/rtc.c +++ b/softmmu/rtc.c @@ -XXX,XX +XXX,XX @@ static time_t qemu_ref_timedate(QEMUClockType clock) return value; } -void qemu_get_timedate(struct tm *tm, int offset) +void qemu_get_timedate(struct tm *tm, time_t offset) { time_t ti = qemu_ref_timedate(rtc_clock); @@ -XXX,XX +XXX,XX @@ void qemu_get_timedate(struct tm *tm, int offset) } } -int qemu_timedate_diff(struct tm *tm) +time_t qemu_timedate_diff(struct tm *tm) { time_t seconds; -- 2.34.1 Where architecturally one ARM_FEATURE_X flag implies another ARM_FEATURE_Y, we allow the CPU init function to only set X, and then set Y for it. Currently we do this in two places -- we set a few flags in arm_cpu_post_init() because we need them to decide which properties to create on the CPU object, and then we do the rest in arm_cpu_realizefn(). However, this is fragile, because it's easy to add a new property and not notice that this means that an X-implies-Y check now has to move from realize to post-init. As a specific example, the pmsav7-dregion property is conditional on ARM_FEATURE_PMSA && ARM_FEATURE_V7, which means it won't appear on the Cortex-M33 and -M55, because they set ARM_FEATURE_V8 and rely on V8-implies-V7, which doesn't happen until the realizefn. Move all of these X-implies-Y checks into a new function, which we call at the top of arm_cpu_post_init(), so the feature bits are available at that point. This does now give us the reverse issue, that if there's a feature bit which is enabled or disabled by the setting of a property then then X-implies-Y features that are dependent on that property need to be in realize, not in this new function. But the only one of those is the "EL3 implies VBAR" which is already in the right place, so putting things this way round seems better to me. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230724174335.2150499-2-peter.maydell@linaro.org --- target/arm/cpu.c | 179 +++++++++++++++++++++++++---------------------- 1 file changed, 97 insertions(+), 82 deletions(-) diff --git a/target/arm/cpu.c b/target/arm/cpu.c index XXXXXXX..XXXXXXX 100644 --- a/target/arm/cpu.c +++ b/target/arm/cpu.c @@ -XXX,XX +XXX,XX @@ unsigned int gt_cntfrq_period_ns(ARMCPU *cpu) NANOSECONDS_PER_SECOND / cpu->gt_cntfrq_hz : 1; } +static void arm_cpu_propagate_feature_implications(ARMCPU *cpu) +{ + CPUARMState *env = &cpu->env; + bool no_aa32 = false; + + /* + * Some features automatically imply others: set the feature + * bits explicitly for these cases. + */ + + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_PMSA); + } + + if (arm_feature(env, ARM_FEATURE_V8)) { + if (arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V7); + } else { + set_feature(env, ARM_FEATURE_V7VE); + } + } + + /* + * There exist AArch64 cpus without AArch32 support. When KVM + * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. + * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. + * As a general principle, we also do not make ID register + * consistency checks anywhere unless using TCG, because only + * for TCG would a consistency-check failure be a QEMU bug. + */ + if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { + no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); + } + + if (arm_feature(env, ARM_FEATURE_V7VE)) { + /* + * v7 Virtualization Extensions. In real hardware this implies + * EL2 and also the presence of the Security Extensions. + * For QEMU, for backwards-compatibility we implement some + * CPUs or CPU configs which have no actual EL2 or EL3 but do + * include the various other features that V7VE implies. + * Presence of EL2 itself is ARM_FEATURE_EL2, and of the + * Security Extensions is ARM_FEATURE_EL3. + */ + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_arm_div, cpu)); + set_feature(env, ARM_FEATURE_LPAE); + set_feature(env, ARM_FEATURE_V7); + } + if (arm_feature(env, ARM_FEATURE_V7)) { + set_feature(env, ARM_FEATURE_VAPA); + set_feature(env, ARM_FEATURE_THUMB2); + set_feature(env, ARM_FEATURE_MPIDR); + if (!arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_V6K); + } else { + set_feature(env, ARM_FEATURE_V6); + } + + /* + * Always define VBAR for V7 CPUs even if it doesn't exist in + * non-EL3 configs. This is needed by some legacy boards. + */ + set_feature(env, ARM_FEATURE_VBAR); + } + if (arm_feature(env, ARM_FEATURE_V6K)) { + set_feature(env, ARM_FEATURE_V6); + set_feature(env, ARM_FEATURE_MVFR); + } + if (arm_feature(env, ARM_FEATURE_V6)) { + set_feature(env, ARM_FEATURE_V5); + if (!arm_feature(env, ARM_FEATURE_M)) { + assert(!tcg_enabled() || no_aa32 || + cpu_isar_feature(aa32_jazelle, cpu)); + set_feature(env, ARM_FEATURE_AUXCR); + } + } + if (arm_feature(env, ARM_FEATURE_V5)) { + set_feature(env, ARM_FEATURE_V4T); + } + if (arm_feature(env, ARM_FEATURE_LPAE)) { + set_feature(env, ARM_FEATURE_V7MP); + } + if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { + set_feature(env, ARM_FEATURE_CBAR); + } + if (arm_feature(env, ARM_FEATURE_THUMB2) && + !arm_feature(env, ARM_FEATURE_M)) { + set_feature(env, ARM_FEATURE_THUMB_DSP); + } +} + void arm_cpu_post_init(Object *obj) { ARMCPU *cpu = ARM_CPU(obj); - /* M profile implies PMSA. We have to do this here rather than - * in realize with the other feature-implication checks because - * we look at the PMSA bit to see if we should add some properties. + /* + * Some features imply others. Figure this out now, because we + * are going to look at the feature bits in deciding which + * properties to add. */ - if (arm_feature(&cpu->env, ARM_FEATURE_M)) { - set_feature(&cpu->env, ARM_FEATURE_PMSA); - } + arm_cpu_propagate_feature_implications(cpu); if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) CPUARMState *env = &cpu->env; int pagebits; Error *local_err = NULL; - bool no_aa32 = false; /* Use pc-relative instructions in system-mode */ #ifndef CONFIG_USER_ONLY @@ -XXX,XX +XXX,XX @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp) cpu->isar.id_isar3 = u; } - /* Some features automatically imply others: */ - if (arm_feature(env, ARM_FEATURE_V8)) { - if (arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V7); - } else { - set_feature(env, ARM_FEATURE_V7VE); - } - } - - /* - * There exist AArch64 cpus without AArch32 support. When KVM - * queries ID_ISAR0_EL1 on such a host, the value is UNKNOWN. - * Similarly, we cannot check ID_AA64PFR0 without AArch64 support. - * As a general principle, we also do not make ID register - * consistency checks anywhere unless using TCG, because only - * for TCG would a consistency-check failure be a QEMU bug. - */ - if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { - no_aa32 = !cpu_isar_feature(aa64_aa32, cpu); - } - - if (arm_feature(env, ARM_FEATURE_V7VE)) { - /* v7 Virtualization Extensions. In real hardware this implies - * EL2 and also the presence of the Security Extensions. - * For QEMU, for backwards-compatibility we implement some - * CPUs or CPU configs which have no actual EL2 or EL3 but do - * include the various other features that V7VE implies. - * Presence of EL2 itself is ARM_FEATURE_EL2, and of the - * Security Extensions is ARM_FEATURE_EL3. - */ - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_arm_div, cpu)); - set_feature(env, ARM_FEATURE_LPAE); - set_feature(env, ARM_FEATURE_V7); - } - if (arm_feature(env, ARM_FEATURE_V7)) { - set_feature(env, ARM_FEATURE_VAPA); - set_feature(env, ARM_FEATURE_THUMB2); - set_feature(env, ARM_FEATURE_MPIDR); - if (!arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_V6K); - } else { - set_feature(env, ARM_FEATURE_V6); - } - - /* Always define VBAR for V7 CPUs even if it doesn't exist in - * non-EL3 configs. This is needed by some legacy boards. - */ - set_feature(env, ARM_FEATURE_VBAR); - } - if (arm_feature(env, ARM_FEATURE_V6K)) { - set_feature(env, ARM_FEATURE_V6); - set_feature(env, ARM_FEATURE_MVFR); - } - if (arm_feature(env, ARM_FEATURE_V6)) { - set_feature(env, ARM_FEATURE_V5); - if (!arm_feature(env, ARM_FEATURE_M)) { - assert(!tcg_enabled() || no_aa32 || - cpu_isar_feature(aa32_jazelle, cpu)); - set_feature(env, ARM_FEATURE_AUXCR); - } - } - if (arm_feature(env, ARM_FEATURE_V5)) { - set_feature(env, ARM_FEATURE_V4T); - } - if (arm_feature(env, ARM_FEATURE_LPAE)) { - set_feature(env, ARM_FEATURE_V7MP); - } - if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { - set_feature(env, ARM_FEATURE_CBAR); - } - if (arm_feature(env, ARM_FEATURE_THUMB2) && - !arm_feature(env, ARM_FEATURE_M)) { - set_feature(env, ARM_FEATURE_THUMB_DSP); - } /* * We rely on no XScale CPU having VFP so we can use the same bits in the -- 2.34.1 M-profile CPUs generally allow configuration of the number of MPU regions that they have. We don't currently model this, so our implementations of some of the board models provide CPUs with the wrong number of regions. RTOSes like Zephyr that hardcode the expected number of regions may therefore not run on the model if they are set up to run on real hardware. Add properties mpu-ns-regions and mpu-s-regions to the ARMV7M object, matching the ability of hardware to configure the number of Secure and NonSecure regions separately. Our actual CPU implementation doesn't currently support that, and it happens that none of the MPS boards we model set the number of regions differently for Secure vs NonSecure, so we provide an interface to the boards and SoCs that won't need to change if we ever do add that functionality in future, but make it an error to configure the two properties to different values. (The property name on the CPU is the somewhat misnamed-for-M-profile "pmsav7-dregion", so we don't follow that naming convention for the properties here. The TRM doesn't say what the CPU configuration variable names are, so we pick something, and follow the lowercase convention we already have for properties here.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-3-peter.maydell@linaro.org --- include/hw/arm/armv7m.h | 8 ++++++++ hw/arm/armv7m.c | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+) diff --git a/include/hw/arm/armv7m.h b/include/hw/arm/armv7m.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armv7m.h +++ b/include/hw/arm/armv7m.h @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_SIMPLE_TYPE(ARMv7MState, ARMV7M) * + Property "vfp": enable VFP (forwarded to CPU object) * + Property "dsp": enable DSP (forwarded to CPU object) * + Property "enable-bitband": expose bitbanded IO + * + Property "mpu-ns-regions": number of Non-Secure MPU regions (forwarded + * to CPU object pmsav7-dregion property; default is whatever the default + * for the CPU is) + * + Property "mpu-s-regions": number of Secure MPU regions (default is + * whatever the default for the CPU is; must currently be set to the same + * value as mpu-ns-regions if the CPU implements the Security Extension) * + Clock input "refclk" is the external reference clock for the systick timers * + Clock input "cpuclk" is the main CPU clock */ @@ -XXX,XX +XXX,XX @@ struct ARMv7MState { Object *idau; uint32_t init_svtor; uint32_t init_nsvtor; + uint32_t mpu_ns_regions; + uint32_t mpu_s_regions; bool enable_bitband; bool start_powered_off; bool vfp; diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -XXX,XX +XXX,XX @@ static void armv7m_realize(DeviceState *dev, Error **errp) } } + /* + * Real M-profile hardware can be configured with a different number of + * MPU regions for Secure vs NonSecure. QEMU's CPU implementation doesn't + * support that yet, so catch attempts to select that. + */ + if (arm_feature(&s->cpu->env, ARM_FEATURE_M_SECURITY) && + s->mpu_ns_regions != s->mpu_s_regions) { + error_setg(errp, + "mpu-ns-regions and mpu-s-regions properties must have the same value"); + return; + } + if (s->mpu_ns_regions != UINT_MAX && + object_property_find(OBJECT(s->cpu), "pmsav7-dregion")) { + if (!object_property_set_uint(OBJECT(s->cpu), "pmsav7-dregion", + s->mpu_ns_regions, errp)) { + return; + } + } + /* * Tell the CPU where the NVIC is; it will fail realize if it doesn't * have one. Similarly, tell the NVIC where its CPU is. @@ -XXX,XX +XXX,XX @@ static Property armv7m_properties[] = { false), DEFINE_PROP_BOOL("vfp", ARMv7MState, vfp, true), DEFINE_PROP_BOOL("dsp", ARMv7MState, dsp, true), + DEFINE_PROP_UINT32("mpu-ns-regions", ARMv7MState, mpu_ns_regions, UINT_MAX), + DEFINE_PROP_UINT32("mpu-s-regions", ARMv7MState, mpu_s_regions, UINT_MAX), DEFINE_PROP_END_OF_LIST(), }; -- 2.34.1 The IoTKit, SSE200 and SSE300 all default to 8 MPU regions. The MPS2/MPS3 FPGA images don't override these except in the case of AN547, which uses 16 MPU regions. Define properties on the ARMSSE object for the MPU regions (using the same names as the documented RTL configuration settings, and following the pattern we already have for this device of using all-caps names as the RTL does), and set them in the board code. We don't actually need to override the default except on AN547, but it's simpler code to have the board code set them always rather than tracking which board subtypes want to set them to a non-default value separately from what that value is. Tho overall effect is that for mps2-an505, mps2-an521 and mps3-an524 we now correctly use 8 MPU regions, while mps3-an547 stays at its current 16 regions. It's possible some guest code wrongly depended on the previous incorrectly modeled number of memory regions. (Such guest code should ideally check the number of regions via the MPU_TYPE register.) The old behaviour can be obtained with additional -global arguments to QEMU: For mps2-an521 and mps2-an524: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 -global sse-200.CPU1_MPU_NS=16 -global sse-200.CPU1_MPU_S=16 For mps2-an505: -global sse-200.CPU0_MPU_NS=16 -global sse-200.CPU0_MPU_S=16 NB that the way the implementation allows this use of -global is slightly fragile: if the board code explicitly sets the properties on the sse-200 object, this overrides the -global command line option. So we rely on: - the boards that need fixing all happen to use the SSE defaults - we can write the board code to only set the property if it is different from the default, rather than having all boards explicitly set the property - the board that does need to use a non-default value happens to need to set it to the same value (16) we previously used This works, but there are some kinds of refactoring of the mps2-tz.c code that would break the support for -global here. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1772 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230724174335.2150499-4-peter.maydell@linaro.org --- include/hw/arm/armsse.h | 5 +++++ hw/arm/armsse.c | 16 ++++++++++++++++ hw/arm/mps2-tz.c | 29 +++++++++++++++++++++++++++++ 3 files changed, 50 insertions(+) diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h index XXXXXXX..XXXXXXX 100644 --- a/include/hw/arm/armsse.h +++ b/include/hw/arm/armsse.h @@ -XXX,XX +XXX,XX @@ * (matching the hardware) is that for CPU0 in an IoTKit and CPU1 in an * SSE-200 both are present; CPU0 in an SSE-200 has neither. * Since the IoTKit has only one CPU, it does not have the CPU1_* properties. + * + QOM properties "CPU0_MPU_NS", "CPU0_MPU_S", "CPU1_MPU_NS" and "CPU1_MPU_S" + * which set the number of MPU regions on the CPUs. If there is only one + * CPU the CPU1 properties are not present. * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0, * which are wired to its NVIC lines 32 .. n+32 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for @@ -XXX,XX +XXX,XX @@ struct ARMSSE { uint32_t exp_numirq; uint32_t sram_addr_width; uint32_t init_svtor; + uint32_t cpu_mpu_ns[SSE_MAX_CPUS]; + uint32_t cpu_mpu_s[SSE_MAX_CPUS]; bool cpu_fpu[SSE_MAX_CPUS]; bool cpu_dsp[SSE_MAX_CPUS]; }; diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/armsse.c +++ b/hw/arm/armsse.c @@ -XXX,XX +XXX,XX @@ static Property iotkit_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse200_properties[] = { DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], false), DEFINE_PROP_BOOL("CPU1_FPU", ARMSSE, cpu_fpu[1], true), DEFINE_PROP_BOOL("CPU1_DSP", ARMSSE, cpu_dsp[1], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), + DEFINE_PROP_UINT32("CPU1_MPU_NS", ARMSSE, cpu_mpu_ns[1], 8), + DEFINE_PROP_UINT32("CPU1_MPU_S", ARMSSE, cpu_mpu_s[1], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static Property sse300_properties[] = { DEFINE_PROP_UINT32("init-svtor", ARMSSE, init_svtor, 0x10000000), DEFINE_PROP_BOOL("CPU0_FPU", ARMSSE, cpu_fpu[0], true), DEFINE_PROP_BOOL("CPU0_DSP", ARMSSE, cpu_dsp[0], true), + DEFINE_PROP_UINT32("CPU0_MPU_NS", ARMSSE, cpu_mpu_ns[0], 8), + DEFINE_PROP_UINT32("CPU0_MPU_S", ARMSSE, cpu_mpu_s[0], 8), DEFINE_PROP_END_OF_LIST() }; @@ -XXX,XX +XXX,XX @@ static void armsse_realize(DeviceState *dev, Error **errp) return; } } + if (!object_property_set_uint(cpuobj, "mpu-ns-regions", + s->cpu_mpu_ns[i], errp)) { + return; + } + if (!object_property_set_uint(cpuobj, "mpu-s-regions", + s->cpu_mpu_s[i], errp)) { + return; + } if (i > 0) { memory_region_add_subregion_overlap(&s->cpu_container[i], 0, diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c index XXXXXXX..XXXXXXX 100644 --- a/hw/arm/mps2-tz.c +++ b/hw/arm/mps2-tz.c @@ -XXX,XX +XXX,XX @@ struct MPS2TZMachineClass { int uart_overflow_irq; /* number of the combined UART overflow IRQ */ uint32_t init_svtor; /* init-svtor setting for SSE */ uint32_t sram_addr_width; /* SRAM_ADDR_WIDTH setting for SSE */ + uint32_t cpu0_mpu_ns; /* CPU0_MPU_NS setting for SSE */ + uint32_t cpu0_mpu_s; /* CPU0_MPU_S setting for SSE */ + uint32_t cpu1_mpu_ns; /* CPU1_MPU_NS setting for SSE */ + uint32_t cpu1_mpu_s; /* CPU1_MPU_S setting for SSE */ const RAMInfo *raminfo; const char *armsse_type; uint32_t boot_ram_size; /* size of ram at address 0; 0 == find in raminfo */ @@ -XXX,XX +XXX,XX @@ OBJECT_DECLARE_TYPE(MPS2TZMachineState, MPS2TZMachineClass, MPS2TZ_MACHINE) #define MPS3_DDR_SIZE (2 * GiB) #endif +/* For cpu{0,1}_mpu_{ns,s}, means "leave at SSE's default value" */ +#define MPU_REGION_DEFAULT UINT32_MAX + static const uint32_t an505_oscclk[] = { 40000000, 24580000, @@ -XXX,XX +XXX,XX @@ static void mps2tz_common_init(MachineState *machine) OBJECT(system_memory), &error_abort); qdev_prop_set_uint32(iotkitdev, "EXP_NUMIRQ", mmc->numirq); qdev_prop_set_uint32(iotkitdev, "init-svtor", mmc->init_svtor); + if (mmc->cpu0_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_NS", mmc->cpu0_mpu_ns); + } + if (mmc->cpu0_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU0_MPU_S", mmc->cpu0_mpu_s); + } + if (object_property_find(OBJECT(iotkitdev), "CPU1_MPU_NS")) { + if (mmc->cpu1_mpu_ns != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_NS", mmc->cpu1_mpu_ns); + } + if (mmc->cpu1_mpu_s != MPU_REGION_DEFAULT) { + qdev_prop_set_uint32(iotkitdev, "CPU1_MPU_S", mmc->cpu1_mpu_s); + } + } qdev_prop_set_uint32(iotkitdev, "SRAM_ADDR_WIDTH", mmc->sram_addr_width); qdev_connect_clock_in(iotkitdev, "MAINCLK", mms->sysclk); qdev_connect_clock_in(iotkitdev, "S32KCLK", mms->s32kclk); @@ -XXX,XX +XXX,XX @@ static void mps2tz_class_init(ObjectClass *oc, void *data) { MachineClass *mc = MACHINE_CLASS(oc); IDAUInterfaceClass *iic = IDAU_INTERFACE_CLASS(oc); + MPS2TZMachineClass *mmc = MPS2TZ_MACHINE_CLASS(oc); mc->init = mps2tz_common_init; mc->reset = mps2_machine_reset; iic->check = mps2_tz_idau_check; + + /* Most machines leave these at the SSE defaults */ + mmc->cpu0_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu0_mpu_s = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_ns = MPU_REGION_DEFAULT; + mmc->cpu1_mpu_s = MPU_REGION_DEFAULT; } static void mps2tz_set_default_ram_info(MPS2TZMachineClass *mmc) @@ -XXX,XX +XXX,XX @@ static void mps3tz_an547_class_init(ObjectClass *oc, void *data) mmc->numirq = 96; mmc->uart_overflow_irq = 48; mmc->init_svtor = 0x00000000; + mmc->cpu0_mpu_s = mmc->cpu0_mpu_ns = 16; mmc->sram_addr_width = 21; mmc->raminfo = an547_raminfo; mmc->armsse_type = TYPE_SSE300; -- 2.34.1