From: Evan Lloyd <evan.lloyd@arm.com>
This change is purely cosmetic, to tidy some code before change.
Mods involve:
Reflow overlength comments.
Split overlength code lines.
Make protocol functions STATIC.
Remove "Horor vacui" comments.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Evan Lloyd <evan.lloyd@arm.com>
Signed-off-by: Girish Pathak <girish.pathak@arm.com>
---
Notes:
v2:
Following comments on the v1 series of patches, some changes were
extracted here to make the actual edits more visible.
- 2017 [Leif]
- Line splits [Leif] (comments about "1 per line")
- STATIC [Leif]
ArmPkg/Drivers/ArmGic/ArmGicDxe.h | 12 +--
ArmPkg/Include/Library/ArmGicLib.h | 29 ++++---
ArmPkg/Drivers/ArmGic/ArmGicCommonDxe.c | 36 +++++----
ArmPkg/Drivers/ArmGic/ArmGicLib.c | 72 +++++++++++++----
ArmPkg/Drivers/ArmGic/GicV2/ArmGicV2Dxe.c | 57 +++++++++-----
ArmPkg/Drivers/ArmGic/GicV3/ArmGicV3Dxe.c | 81 +++++++++++++-------
ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c | 12 +--
7 files changed, 195 insertions(+), 104 deletions(-)
diff --git a/ArmPkg/Drivers/ArmGic/ArmGicDxe.h b/ArmPkg/Drivers/ArmGic/ArmGicDxe.h
index af33aa90b00c6775e10a831d63ed707394862362..1018f2004e75d879a72c2d6bf37b64051e720d12 100644
--- a/ArmPkg/Drivers/ArmGic/ArmGicDxe.h
+++ b/ArmPkg/Drivers/ArmGic/ArmGicDxe.h
@@ -28,9 +28,9 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
extern UINTN mGicNumInterrupts;
extern HARDWARE_INTERRUPT_HANDLER *gRegisteredInterruptHandlers;
-//
+
// Common API
-//
+
EFI_STATUS
InstallAndRegisterInterruptService (
IN EFI_HARDWARE_INTERRUPT_PROTOCOL *InterruptProtocol,
@@ -46,18 +46,18 @@ RegisterInterruptSource (
IN HARDWARE_INTERRUPT_HANDLER Handler
);
-//
+
// GicV2 API
-//
+
EFI_STATUS
GicV2DxeInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
);
-//
+
// GicV3 API
-//
+
EFI_STATUS
GicV3DxeInitialize (
IN EFI_HANDLE ImageHandle,
diff --git a/ArmPkg/Include/Library/ArmGicLib.h b/ArmPkg/Include/Library/ArmGicLib.h
index 4364f3ffef464596f64cf59881d703cf54cf0ddd..f7b546895d116f81c65a853fcdb067ec7601b2da 100644
--- a/ArmPkg/Include/Library/ArmGicLib.h
+++ b/ArmPkg/Include/Library/ArmGicLib.h
@@ -17,9 +17,9 @@
#include <Library/ArmGicArchLib.h>
-//
+
// GIC Distributor
-//
+
#define ARM_GIC_ICDDCR 0x000 // Distributor Control Register
#define ARM_GIC_ICDICTR 0x004 // Interrupt Controller Type Register
#define ARM_GIC_ICDIIDR 0x008 // Implementer Identification Register
@@ -51,9 +51,9 @@
#define ARM_GIC_ICDDCR_ARE (1 << 4) // Affinity Routing Enable (ARE)
#define ARM_GIC_ICDDCR_DS (1 << 6) // Disable Security (DS)
-//
+
// GIC Redistributor
-//
+
#define ARM_GICR_CTLR_FRAME_SIZE SIZE_64KB
#define ARM_GICR_SGI_PPI_FRAME_SIZE SIZE_64KB
@@ -65,9 +65,9 @@
#define ARM_GICR_ISENABLER 0x0100 // Interrupt Set-Enable Registers
#define ARM_GICR_ICENABLER 0x0180 // Interrupt Clear-Enable Registers
-//
+
// GIC Cpu interface
-//
+
#define ARM_GIC_ICCICR 0x00 // CPU Interface Control Register
#define ARM_GIC_ICCPMR 0x04 // Interrupt Priority Mask Register
#define ARM_GIC_ICCBPR 0x08 // Binary Point Register
@@ -104,9 +104,9 @@ ArmGicGetInterfaceIdentification (
IN INTN GicInterruptInterfaceBase
);
-//
+
// GIC Secure interfaces
-//
+
VOID
EFIAPI
ArmGicSetupNonSecure (
@@ -170,7 +170,8 @@ ArmGicSendSgiTo (
* in the GICv3 the register value is only the InterruptId.
*
* @param GicInterruptInterfaceBase Base Address of the GIC CPU Interface
- * @param InterruptId InterruptId read from the Interrupt Acknowledge Register
+ * @param InterruptId InterruptId read from the Interrupt
+ * Acknowledge Register
*
* @retval value returned by the Interrupt Acknowledge Register
*
@@ -220,12 +221,12 @@ ArmGicIsInterruptEnabled (
IN UINTN Source
);
-//
// GIC revision 2 specific declarations
-//
-// Interrupts from 1020 to 1023 are considered as special interrupts (eg: spurious interrupts)
-#define ARM_GIC_IS_SPECIAL_INTERRUPTS(Interrupt) (((Interrupt) >= 1020) && ((Interrupt) <= 1023))
+// Interrupts from 1020 to 1023 are considered as special interrupts
+// (eg: spurious interrupts)
+#define ARM_GIC_IS_SPECIAL_INTERRUPTS(Interrupt) \
+ (((Interrupt) >= 1020) && ((Interrupt) <= 1023))
VOID
EFIAPI
@@ -260,9 +261,7 @@ ArmGicV2EndOfInterrupt (
IN UINTN Source
);
-//
// GIC revision 3 specific declarations
-//
#define ICC_SRE_EL2_SRE (1 << 0)
diff --git a/ArmPkg/Drivers/ArmGic/ArmGicCommonDxe.c b/ArmPkg/Drivers/ArmGic/ArmGicCommonDxe.c
index be77b8361c5af033fd2889cdb48902af867f321d..88cb455b75bb8e8cb22157643a392403ce93129d 100644
--- a/ArmPkg/Drivers/ArmGic/ArmGicCommonDxe.c
+++ b/ArmPkg/Drivers/ArmGic/ArmGicCommonDxe.c
@@ -28,14 +28,14 @@ ExitBootServicesEvent (
IN VOID *Context
);
-//
+
// Making this global saves a few bytes in image size
-//
+
EFI_HANDLE gHardwareInterruptHandle = NULL;
-//
+
// Notifications
-//
+
EFI_EVENT EfiExitBootServicesEvent = (EFI_EVENT)NULL;
// Maximum Number of Interrupts
@@ -96,7 +96,8 @@ InstallAndRegisterInterruptService (
EFI_CPU_ARCH_PROTOCOL *Cpu;
// Initialize the array for the Interrupt Handlers
- gRegisteredInterruptHandlers = (HARDWARE_INTERRUPT_HANDLER*)AllocateZeroPool (sizeof(HARDWARE_INTERRUPT_HANDLER) * mGicNumInterrupts);
+ gRegisteredInterruptHandlers = (HARDWARE_INTERRUPT_HANDLER*)
+ AllocateZeroPool (sizeof(HARDWARE_INTERRUPT_HANDLER) * mGicNumInterrupts);
if (gRegisteredInterruptHandlers == NULL) {
return EFI_OUT_OF_RESOURCES;
}
@@ -110,32 +111,41 @@ InstallAndRegisterInterruptService (
return Status;
}
- //
+
// Get the CPU protocol that this driver requires.
- //
+
Status = gBS->LocateProtocol (&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu);
if (EFI_ERROR (Status)) {
return Status;
}
- //
+
// Unregister the default exception handler.
- //
+
Status = Cpu->RegisterInterruptHandler (Cpu, ARM_ARCH_EXCEPTION_IRQ, NULL);
if (EFI_ERROR (Status)) {
return Status;
}
- //
+
// Register to receive interrupts
- //
- Status = Cpu->RegisterInterruptHandler (Cpu, ARM_ARCH_EXCEPTION_IRQ, InterruptHandler);
+ Status = Cpu->RegisterInterruptHandler (
+ Cpu,
+ ARM_ARCH_EXCEPTION_IRQ,
+ InterruptHandler
+ );
if (EFI_ERROR (Status)) {
return Status;
}
// Register for an ExitBootServicesEvent
- Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY, ExitBootServicesEvent, NULL, &EfiExitBootServicesEvent);
+ Status = gBS->CreateEvent (
+ EVT_SIGNAL_EXIT_BOOT_SERVICES,
+ TPL_NOTIFY,
+ ExitBootServicesEvent,
+ NULL,
+ &EfiExitBootServicesEvent
+ );
return Status;
}
diff --git a/ArmPkg/Drivers/ArmGic/ArmGicLib.c b/ArmPkg/Drivers/ArmGic/ArmGicLib.c
index e658e9bff5d8107b3914bdf1e9e1e51a4e4d4cd7..852330b80db9726f860f6868f7e90d48756b6e58 100644
--- a/ArmPkg/Drivers/ArmGic/ArmGicLib.c
+++ b/ArmPkg/Drivers/ArmGic/ArmGicLib.c
@@ -55,13 +55,17 @@ GicGetCpuRedistributorBase (
UINTN GicCpuRedistributorBase;
MpId = ArmReadMpidr ();
- // Define CPU affinity as Affinity0[0:8], Affinity1[9:15], Affinity2[16:23], Affinity3[24:32]
+ // Define CPU affinity as Affinity0[0:8], Affinity1[9:15],
+ // Affinity2[16:23], Affinity3[24:32]
// whereas Affinity3 is defined at [32:39] in MPIDR
- CpuAffinity = (MpId & (ARM_CORE_AFF0 | ARM_CORE_AFF1 | ARM_CORE_AFF2)) | ((MpId & ARM_CORE_AFF3) >> 8);
+ CpuAffinity = (MpId & (ARM_CORE_AFF0 | ARM_CORE_AFF1 | ARM_CORE_AFF2))
+ | ((MpId & ARM_CORE_AFF3) >> 8);
if (Revision == ARM_GIC_ARCH_REVISION_3) {
- // 2 x 64KB frame: Redistributor control frame + SGI Control & Generation frame
- GicRedistributorGranularity = ARM_GICR_CTLR_FRAME_SIZE + ARM_GICR_SGI_PPI_FRAME_SIZE;
+ // 2 x 64KB frame:
+ // Redistributor control frame + SGI Control & Generation frame
+ GicRedistributorGranularity = ARM_GICR_CTLR_FRAME_SIZE
+ + ARM_GICR_SGI_PPI_FRAME_SIZE;
} else {
ASSERT_EFI_ERROR (EFI_UNSUPPORTED);
return 0;
@@ -112,7 +116,10 @@ ArmGicSendSgiTo (
IN INTN SgiId
)
{
- MmioWrite32 (GicDistributorBase + ARM_GIC_ICDSGIR, ((TargetListFilter & 0x3) << 24) | ((CPUTargetList & 0xFF) << 16) | SgiId);
+ MmioWrite32 (
+ GicDistributorBase + ARM_GIC_ICDSGIR,
+ ((TargetListFilter & 0x3) << 24) | ((CPUTargetList & 0xFF) << 16) | SgiId
+ );
}
/*
@@ -123,7 +130,8 @@ ArmGicSendSgiTo (
* in the GICv3 the register value is only the InterruptId.
*
* @param GicInterruptInterfaceBase Base Address of the GIC CPU Interface
- * @param InterruptId InterruptId read from the Interrupt Acknowledge Register
+ * @param InterruptId InterruptId read from the Interrupt
+ * Acknowledge Register
*
* @retval value returned by the Interrupt Acknowledge Register
*
@@ -200,16 +208,28 @@ ArmGicEnableInterrupt (
FeaturePcdGet (PcdArmGicV3WithV2Legacy) ||
SourceIsSpi (Source)) {
// Write set-enable register
- MmioWrite32 (GicDistributorBase + ARM_GIC_ICDISER + (4 * RegOffset), 1 << RegShift);
+ MmioWrite32 (
+ GicDistributorBase + ARM_GIC_ICDISER + (4 * RegOffset),
+ 1 << RegShift
+ );
} else {
- GicCpuRedistributorBase = GicGetCpuRedistributorBase (GicRedistributorBase, Revision);
+ GicCpuRedistributorBase = GicGetCpuRedistributorBase (
+ GicRedistributorBase,
+ Revision
+ );
if (GicCpuRedistributorBase == 0) {
ASSERT_EFI_ERROR (EFI_NOT_FOUND);
return;
}
// Write set-enable register
- MmioWrite32 (GicCpuRedistributorBase + ARM_GICR_CTLR_FRAME_SIZE + ARM_GICR_ISENABLER + (4 * RegOffset), 1 << RegShift);
+ MmioWrite32 (
+ (GicCpuRedistributorBase
+ + ARM_GICR_CTLR_FRAME_SIZE
+ + ARM_GICR_ISENABLER
+ + (4 * RegOffset)),
+ 1 << RegShift
+ );
}
}
@@ -235,15 +255,27 @@ ArmGicDisableInterrupt (
FeaturePcdGet (PcdArmGicV3WithV2Legacy) ||
SourceIsSpi (Source)) {
// Write clear-enable register
- MmioWrite32 (GicDistributorBase + ARM_GIC_ICDICER + (4 * RegOffset), 1 << RegShift);
+ MmioWrite32 (
+ GicDistributorBase + ARM_GIC_ICDICER + (4 * RegOffset),
+ 1 << RegShift
+ );
} else {
- GicCpuRedistributorBase = GicGetCpuRedistributorBase (GicRedistributorBase, Revision);
+ GicCpuRedistributorBase = GicGetCpuRedistributorBase (
+ GicRedistributorBase,
+ Revision
+ );
if (GicCpuRedistributorBase == 0) {
return;
}
// Write clear-enable register
- MmioWrite32 (GicCpuRedistributorBase + ARM_GICR_CTLR_FRAME_SIZE + ARM_GICR_ICENABLER + (4 * RegOffset), 1 << RegShift);
+ MmioWrite32 (
+ (GicCpuRedistributorBase
+ + ARM_GICR_CTLR_FRAME_SIZE
+ + ARM_GICR_ICENABLER
+ + (4 * RegOffset)),
+ 1 << RegShift
+ );
}
}
@@ -269,15 +301,25 @@ ArmGicIsInterruptEnabled (
if ((Revision == ARM_GIC_ARCH_REVISION_2) ||
FeaturePcdGet (PcdArmGicV3WithV2Legacy) ||
SourceIsSpi (Source)) {
- Interrupts = ((MmioRead32 (GicDistributorBase + ARM_GIC_ICDISER + (4 * RegOffset)) & (1 << RegShift)) != 0);
+ Interrupts = ((MmioRead32 (
+ GicDistributorBase + ARM_GIC_ICDISER + (4 * RegOffset)
+ )
+ & (1 << RegShift)) != 0);
} else {
- GicCpuRedistributorBase = GicGetCpuRedistributorBase (GicRedistributorBase, Revision);
+ GicCpuRedistributorBase = GicGetCpuRedistributorBase (
+ GicRedistributorBase,
+ Revision
+ );
if (GicCpuRedistributorBase == 0) {
return 0;
}
// Read set-enable register
- Interrupts = MmioRead32 (GicCpuRedistributorBase + ARM_GICR_CTLR_FRAME_SIZE + ARM_GICR_ISENABLER + (4 * RegOffset));
+ Interrupts = MmioRead32 (
+ GicCpuRedistributorBase
+ + ARM_GICR_CTLR_FRAME_SIZE
+ + ARM_GICR_ISENABLER
+ + (4 * RegOffset));
}
return ((Interrupts & (1 << RegShift)) != 0);
diff --git a/ArmPkg/Drivers/ArmGic/GicV2/ArmGicV2Dxe.c b/ArmPkg/Drivers/ArmGic/GicV2/ArmGicV2Dxe.c
index b9ecd5543a3e2e0b00fffbcf5543a60567bb5dde..50ec90207b515d849cbf64f0a4b0d639b3868e60 100644
--- a/ArmPkg/Drivers/ArmGic/GicV2/ArmGicV2Dxe.c
+++ b/ArmPkg/Drivers/ArmGic/GicV2/ArmGicV2Dxe.c
@@ -2,7 +2,7 @@
Copyright (c) 2009, Hewlett-Packard Company. All rights reserved.<BR>
Portions copyright (c) 2010, Apple Inc. All rights reserved.<BR>
-Portions copyright (c) 2011-2016, ARM Ltd. All rights reserved.<BR>
+Portions copyright (c) 2011-2017, ARM Ltd. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -43,6 +43,7 @@ STATIC UINT32 mGicDistributorBase;
@retval EFI_UNSUPPORTED Source interrupt is not supported
**/
+STATIC
EFI_STATUS
EFIAPI
GicV2EnableInterruptSource (
@@ -70,6 +71,7 @@ GicV2EnableInterruptSource (
@retval EFI_UNSUPPORTED Source interrupt is not supported
**/
+STATIC
EFI_STATUS
EFIAPI
GicV2DisableInterruptSource (
@@ -98,6 +100,7 @@ GicV2DisableInterruptSource (
@retval EFI_UNSUPPORTED Source interrupt is not supported
**/
+STATIC
EFI_STATUS
EFIAPI
GicV2GetInterruptSourceState (
@@ -127,6 +130,7 @@ GicV2GetInterruptSourceState (
@retval EFI_UNSUPPORTED Source interrupt is not supported
**/
+STATIC
EFI_STATUS
EFIAPI
GicV2EndOfInterrupt (
@@ -147,13 +151,15 @@ GicV2EndOfInterrupt (
EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs.
@param InterruptType Defines the type of interrupt or exception that
- occurred on the processor.This parameter is processor architecture specific.
+ occurred on the processor.This parameter is
+ processor architecture specific.
@param SystemContext A pointer to the processor context when
the interrupt occurred on the processor.
@return None
**/
+STATIC
VOID
EFIAPI
GicV2IrqInterruptHandler (
@@ -166,7 +172,8 @@ GicV2IrqInterruptHandler (
GicInterrupt = ArmGicV2AcknowledgeInterrupt (mGicInterruptInterfaceBase);
- // Special Interrupts (ID1020-ID1023) have an Interrupt ID greater than the number of interrupt (ie: Spurious interrupt).
+ // Special Interrupts (ID1020-ID1023) have an Interrupt ID greater than the
+ // number of interrupt (ie: Spurious interrupt).
if ((GicInterrupt & ARM_GIC_ICCIAR_ACKINTID) >= mGicNumInterrupts) {
// The special interrupt do not need to be acknowledge
return;
@@ -182,9 +189,9 @@ GicV2IrqInterruptHandler (
}
}
-//
+
// The protocol instance produced by this driver
-//
+
EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptV2Protocol = {
RegisterInterruptSource,
GicV2EnableInterruptSource,
@@ -196,12 +203,13 @@ EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptV2Protocol = {
/**
Shutdown our hardware
- DXE Core will disable interrupts and turn off the timer and disable interrupts
- after all the event handlers have run.
+ DXE Core will disable interrupts and turn off the timer and disable
+ interrupts after all the event handlers have run.
@param[in] Event The Event that is being processed
@param[in] Context Event Context
**/
+STATIC
VOID
EFIAPI
GicV2ExitBootServicesEvent (
@@ -256,7 +264,8 @@ GicV2DxeInitialize (
UINTN RegShift;
UINT32 CpuTarget;
- // Make sure the Interrupt Controller Protocol is not already installed in the system.
+ // Make sure the Interrupt Controller Protocol is not already installed in
+ // the system.
ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid);
mGicInterruptInterfaceBase = PcdGet64 (PcdGicInterruptInterfaceBase);
@@ -276,25 +285,28 @@ GicV2DxeInitialize (
);
}
- //
+
// Targets the interrupts to the Primary Cpu
- //
- // Only Primary CPU will run this code. We can identify our GIC CPU ID by reading
- // the GIC Distributor Target register. The 8 first GICD_ITARGETSRn are banked to each
- // connected CPU. These 8 registers hold the CPU targets fields for interrupts 0-31.
- // More Info in the GIC Specification about "Interrupt Processor Targets Registers"
- //
- // Read the first Interrupt Processor Targets Register (that corresponds to the 4
- // first SGIs)
+ // Only Primary CPU will run this code. We can identify our GIC CPU ID by
+ // reading the GIC Distributor Target register. The 8 first GICD_ITARGETSRn
+ // are banked to each connected CPU. These 8 registers hold the CPU targets
+ // fields for interrupts 0-31. More Info in the GIC Specification about
+ // "Interrupt Processor Targets Registers"
+
+ // Read the first Interrupt Processor Targets Register (that corresponds to
+ // the 4 first SGIs)
CpuTarget = MmioRead32 (mGicDistributorBase + ARM_GIC_ICDIPTR);
- // The CPU target is a bit field mapping each CPU to a GIC CPU Interface. This value
- // is 0 when we run on a uniprocessor platform.
+ // The CPU target is a bit field mapping each CPU to a GIC CPU Interface.
+ // This value is 0 when we run on a uniprocessor platform.
if (CpuTarget != 0) {
// The 8 first Interrupt Processor Targets Registers are read-only
for (Index = 8; Index < (mGicNumInterrupts / 4); Index++) {
- MmioWrite32 (mGicDistributorBase + ARM_GIC_ICDIPTR + (Index * 4), CpuTarget);
+ MmioWrite32 (
+ mGicDistributorBase + ARM_GIC_ICDIPTR + (Index * 4),
+ CpuTarget
+ );
}
}
@@ -311,7 +323,10 @@ GicV2DxeInitialize (
ArmGicEnableDistributor (mGicDistributorBase);
Status = InstallAndRegisterInterruptService (
- &gHardwareInterruptV2Protocol, GicV2IrqInterruptHandler, GicV2ExitBootServicesEvent);
+ &gHardwareInterruptV2Protocol,
+ GicV2IrqInterruptHandler,
+ GicV2ExitBootServicesEvent
+ );
return Status;
}
diff --git a/ArmPkg/Drivers/ArmGic/GicV3/ArmGicV3Dxe.c b/ArmPkg/Drivers/ArmGic/GicV3/ArmGicV3Dxe.c
index 8af97a93b1889b33978a7c7fb2a8417c83139142..69b2d8d794e151e25f06cbea079e2796d9793a43 100644
--- a/ArmPkg/Drivers/ArmGic/GicV3/ArmGicV3Dxe.c
+++ b/ArmPkg/Drivers/ArmGic/GicV3/ArmGicV3Dxe.c
@@ -1,6 +1,6 @@
/** @file
*
-* Copyright (c) 2011-2016, ARM Limited. All rights reserved.
+* Copyright (c) 2011-2017, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
@@ -33,6 +33,7 @@ STATIC UINTN mGicRedistributorsBase;
@retval EFI_DEVICE_ERROR Hardware could not be programmed.
**/
+STATIC
EFI_STATUS
EFIAPI
GicV3EnableInterruptSource (
@@ -60,6 +61,7 @@ GicV3EnableInterruptSource (
@retval EFI_DEVICE_ERROR Hardware could not be programmed.
**/
+STATIC
EFI_STATUS
EFIAPI
GicV3DisableInterruptSource (
@@ -88,6 +90,7 @@ GicV3DisableInterruptSource (
@retval EFI_DEVICE_ERROR InterruptState is not valid
**/
+STATIC
EFI_STATUS
EFIAPI
GicV3GetInterruptSourceState (
@@ -101,7 +104,10 @@ GicV3GetInterruptSourceState (
return EFI_UNSUPPORTED;
}
- *InterruptState = ArmGicIsInterruptEnabled (mGicDistributorBase, mGicRedistributorsBase, Source);
+ *InterruptState = ArmGicIsInterruptEnabled (
+ mGicDistributorBase,
+ mGicRedistributorsBase,
+ Source);
return EFI_SUCCESS;
}
@@ -117,6 +123,7 @@ GicV3GetInterruptSourceState (
@retval EFI_DEVICE_ERROR Hardware could not be programmed.
**/
+STATIC
EFI_STATUS
EFIAPI
GicV3EndOfInterrupt (
@@ -137,13 +144,15 @@ GicV3EndOfInterrupt (
EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs.
@param InterruptType Defines the type of interrupt or exception that
- occurred on the processor.This parameter is processor architecture specific.
+ occurred on the processor. This parameter is
+ processor architecture specific.
@param SystemContext A pointer to the processor context when
the interrupt occurred on the processor.
@return None
**/
+STATIC
VOID
EFIAPI
GicV3IrqInterruptHandler (
@@ -173,9 +182,9 @@ GicV3IrqInterruptHandler (
}
}
-//
+
// The protocol instance produced by this driver
-//
+
EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptV3Protocol = {
RegisterInterruptSource,
GicV3EnableInterruptSource,
@@ -242,17 +251,16 @@ GicV3DxeInitialize (
UINT64 CpuTarget;
UINT64 MpId;
- // Make sure the Interrupt Controller Protocol is not already installed in the system.
+ // Make sure the Interrupt Controller Protocol is not already installed in
+ // the system.
ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid);
mGicDistributorBase = PcdGet64 (PcdGicDistributorBase);
mGicRedistributorsBase = PcdGet64 (PcdGicRedistributorsBase);
mGicNumInterrupts = ArmGicGetMaxNumInterrupts (mGicDistributorBase);
- //
// We will be driving this GIC in native v3 mode, i.e., with Affinity
// Routing enabled. So ensure that the ARE bit is set.
- //
if (!FeaturePcdGet (PcdArmGicV3WithV2Legacy)) {
MmioOr32 (mGicDistributorBase + ARM_GIC_ICDDCR, ARM_GIC_ICDDCR_ARE);
}
@@ -270,51 +278,65 @@ GicV3DxeInitialize (
);
}
- //
// Targets the interrupts to the Primary Cpu
- //
if (FeaturePcdGet (PcdArmGicV3WithV2Legacy)) {
- // Only Primary CPU will run this code. We can identify our GIC CPU ID by reading
- // the GIC Distributor Target register. The 8 first GICD_ITARGETSRn are banked to each
- // connected CPU. These 8 registers hold the CPU targets fields for interrupts 0-31.
- // More Info in the GIC Specification about "Interrupt Processor Targets Registers"
- //
- // Read the first Interrupt Processor Targets Register (that corresponds to the 4
- // first SGIs)
+ // Only Primary CPU will run this code. We can identify our GIC CPU ID by
+ // reading the GIC Distributor Target register. The 8 first
+ // GICD_ITARGETSRn are banked to each connected CPU. These 8 registers
+ // hold the CPU targets fields for interrupts 0-31. More Info in the GIC
+ // Specification about "Interrupt Processor Targets Registers"
+
+ // Read the first Interrupt Processor Targets Register (that corresponds
+ // to the 4 first SGIs)
CpuTarget = MmioRead32 (mGicDistributorBase + ARM_GIC_ICDIPTR);
- // The CPU target is a bit field mapping each CPU to a GIC CPU Interface. This value
- // is 0 when we run on a uniprocessor platform.
+ // The CPU target is a bit field mapping each CPU to a GIC CPU Interface.
+ // This value is 0 when we run on a uniprocessor platform.
if (CpuTarget != 0) {
// The 8 first Interrupt Processor Targets Registers are read-only
for (Index = 8; Index < (mGicNumInterrupts / 4); Index++) {
- MmioWrite32 (mGicDistributorBase + ARM_GIC_ICDIPTR + (Index * 4), CpuTarget);
+ MmioWrite32 (
+ mGicDistributorBase + ARM_GIC_ICDIPTR + (Index * 4),
+ CpuTarget
+ );
}
}
} else {
MpId = ArmReadMpidr ();
- CpuTarget = MpId & (ARM_CORE_AFF0 | ARM_CORE_AFF1 | ARM_CORE_AFF2 | ARM_CORE_AFF3);
+ CpuTarget = MpId &
+ (ARM_CORE_AFF0 | ARM_CORE_AFF1 | ARM_CORE_AFF2 | ARM_CORE_AFF3);
+
+ if ((MmioRead32 (
+ mGicDistributorBase + ARM_GIC_ICDDCR
+ ) & ARM_GIC_ICDDCR_DS) != 0) {
- if ((MmioRead32 (mGicDistributorBase + ARM_GIC_ICDDCR) & ARM_GIC_ICDDCR_DS) != 0) {
- //
// If the Disable Security (DS) control bit is set, we are dealing with a
// GIC that has only one security state. In this case, let's assume we are
// executing in non-secure state (which is appropriate for DXE modules)
// and that no other firmware has performed any configuration on the GIC.
// This means we need to reconfigure all interrupts to non-secure Group 1
// first.
- //
- MmioWrite32 (mGicRedistributorsBase + ARM_GICR_CTLR_FRAME_SIZE + ARM_GIC_ICDISR, 0xffffffff);
+
+ MmioWrite32 (
+ mGicRedistributorsBase + ARM_GICR_CTLR_FRAME_SIZE + ARM_GIC_ICDISR,
+ 0xffffffff
+ );
for (Index = 32; Index < mGicNumInterrupts; Index += 32) {
- MmioWrite32 (mGicDistributorBase + ARM_GIC_ICDISR + Index / 8, 0xffffffff);
+ MmioWrite32 (
+ mGicDistributorBase + ARM_GIC_ICDISR + Index / 8,
+ 0xffffffff
+ );
}
}
// Route the SPIs to the primary CPU. SPIs start at the INTID 32
for (Index = 0; Index < (mGicNumInterrupts - 32); Index++) {
- MmioWrite32 (mGicDistributorBase + ARM_GICD_IROUTER + (Index * 8), CpuTarget | ARM_GICD_IROUTER_IRM);
+ MmioWrite32 (
+ mGicDistributorBase + ARM_GICD_IROUTER + (Index * 8),
+ CpuTarget | ARM_GICD_IROUTER_IRM
+ );
}
}
@@ -331,7 +353,10 @@ GicV3DxeInitialize (
ArmGicEnableDistributor (mGicDistributorBase);
Status = InstallAndRegisterInterruptService (
- &gHardwareInterruptV3Protocol, GicV3IrqInterruptHandler, GicV3ExitBootServicesEvent);
+ &gHardwareInterruptV3Protocol,
+ GicV3IrqInterruptHandler,
+ GicV3ExitBootServicesEvent
+ );
return Status;
}
diff --git a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
index 54a1625a32137556b58fa93ddf7fbe4d0f22c786..6d102e25047253048ac555d6fb5de7223d78f381 100644
--- a/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
+++ b/ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.c
@@ -193,18 +193,18 @@ WatchdogSetTimerPeriod (
// Work out how many timer ticks will equate to TimerPeriod
mNumTimerTicks = (mTimerFrequencyHz * TimerPeriod) / TIME_UNITS_PER_SECOND;
- //
+
// If the number of required ticks is greater than the max number the
// watchdog's offset register (WOR) can hold, we need to manually compute and
// set the compare register (WCV)
- //
+
if (mNumTimerTicks > MAX_UINT32) {
- //
+
// We need to enable the watchdog *before* writing to the compare register,
// because enabling the watchdog causes an "explicit refresh", which
// clobbers the compare register (WCV). In order to make sure this doesn't
// trigger an interrupt, set the offset to max.
- //
+
Status = WatchdogWriteOffsetRegister (MAX_UINT32);
if (EFI_ERROR (Status)) {
return Status;
@@ -302,11 +302,11 @@ GenericWatchdogEntry (
EFI_STATUS Status;
EFI_HANDLE Handle;
- //
+
// Make sure the Watchdog Timer Architectural Protocol has not been installed
// in the system yet.
// This will avoid conflicts with the universal watchdog
- //
+
ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiWatchdogTimerArchProtocolGuid);
mTimerFrequencyHz = ArmGenericTimerGetTimerFreq ();
--
Guid("CE165669-3EF3-493F-B85D-6190EE5B9759")
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
© 2016 - 2024 Red Hat, Inc.