> Subject: Re: [PATCH 0/3] xen/arm: add i.MX lpuart and i.MX8QM initial
> support
> 
> On 28.02.2022 02:07, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > Add i.MX lpuart driver and i.MX8QM platform support.
> >  - lpuart is the uart IP used in i.MX8QM/QXP/93.
> >  - Very basic i.MX8QM platform support.
> >
> > Peng Fan (3):
> >   xen/arm: Add i.MX lpuart driver
> >   xen/arm: Add i.MX lpuart early printk support
> >   xen/arm: Add i.MX8QM platform support
> >
> >  xen/arch/arm/Kconfig.debug              |  21 ++
> >  xen/arch/arm/arm64/debug-imx-lpuart.inc |  48 ++++
> >  xen/arch/arm/platforms/Makefile         |   1 +
> >  xen/arch/arm/platforms/imx8qm.c         |  44 ++++
> >  xen/drivers/char/Kconfig                |   8 +
> >  xen/drivers/char/Makefile               |   1 +
> >  xen/drivers/char/imx-lpuart.c           | 303
> ++++++++++++++++++++++++
> >  xen/include/xen/imx-lpuart.h            |  64 +++++
> >  8 files changed, 490 insertions(+)
> >  create mode 100644 xen/arch/arm/arm64/debug-imx-lpuart.inc
> >  create mode 100644 xen/arch/arm/platforms/imx8qm.c  create mode
> > 100644 xen/drivers/char/imx-lpuart.c  create mode 100644
> > xen/include/xen/imx-lpuart.h
> 
> I guess the latter two additions want to be accompanied by an update
> to ./MAINTAINERS' ARM section.

I'll address this in v2. Let me wait more comments and address together.

Thanks,
Peng.

> 
> Jan