Wrap platform_op hypercall definition and platform_hypercall.o of arm and
x86 with CONFIG_PLATFORM_OP, and since PV_SHIM_EXCLUSIVE needs sorting in
the future, move them out of PV_SHIM_EXCLUSIVE condition at the same time.
And need to make PLATFORM_OP with help info. It shall at least provide
"# CONFIG_PLATFORM_OP is not set" in preset configs for PV shim on x86.
With that, all dependent option get covered and could be deleted.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
---
cc: Stefano Stabellini <sstabellini@kernel.org>
cc: Julien Grall <julien@xen.org>
cc: Bertrand Marquis <bertrand.marquis@arm.com>
cc: Michal Orzel <michal.orzel@amd.com>
cc: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
cc: Andrew Cooper <andrew.cooper3@citrix.com>
cc: Anthony PERARD <anthony.perard@vates.tech>
cc: Jan Beulich <jbeulich@suse.com>
cc: "Roger Pau Monné" <roger.pau@citrix.com>
---
xen/arch/arm/Makefile | 2 +-
xen/arch/x86/Makefile | 2 ++
xen/arch/x86/configs/pvshim_defconfig | 1 +
xen/common/Kconfig | 3 +++
xen/include/hypercall-defs.c | 6 ++++--
5 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
index f833cdf2078b..4f9290fe6345 100644
--- a/xen/arch/arm/Makefile
+++ b/xen/arch/arm/Makefile
@@ -42,7 +42,7 @@ obj-$(CONFIG_VM_EVENT) += mem_access.o
obj-y += mm.o
obj-$(CONFIG_VM_EVENT) += monitor.o
obj-y += p2m.o
-obj-y += platform.o
+obj-$(CONFIG_PLATFORM_OP) += platform.o
obj-y += platform_hypercall.o
obj-y += physdev.o
obj-y += processor.o
diff --git a/xen/arch/x86/Makefile b/xen/arch/x86/Makefile
index 5aab30a0c4a4..e180ab1a0409 100644
--- a/xen/arch/x86/Makefile
+++ b/xen/arch/x86/Makefile
@@ -80,6 +80,8 @@ obj-y += xstate.o
ifneq ($(CONFIG_PV_SHIM_EXCLUSIVE),y)
obj-y += domctl.o
+endif
+ifeq ($(CONFIG_PLATFORM_OP),y)
obj-y += platform_hypercall.o
obj-$(CONFIG_COMPAT) += x86_64/platform_hypercall.o
endif
diff --git a/xen/arch/x86/configs/pvshim_defconfig b/xen/arch/x86/configs/pvshim_defconfig
index c58c29adb0bf..e9ede13250d8 100644
--- a/xen/arch/x86/configs/pvshim_defconfig
+++ b/xen/arch/x86/configs/pvshim_defconfig
@@ -25,3 +25,4 @@ CONFIG_EXPERT=y
# CONFIG_DEBUG is not set
# CONFIG_GDBSX is not set
# CONFIG_SYSCTL is not set
+# CONFIG_PLATFORM_OP is not set
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index 1a8f5ec93364..13b544cbb1d5 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -630,6 +630,9 @@ config SYSCTL
config PLATFORM_OP
bool "Enable Platform Operation hypercall"
default y
+ help
+ This option shall only be disabled on some dom0less systems, or
+ PV shim on x86, to reduce Xen footprint.
endmenu
diff --git a/xen/include/hypercall-defs.c b/xen/include/hypercall-defs.c
index c1081d87a252..96ad6efacd5a 100644
--- a/xen/include/hypercall-defs.c
+++ b/xen/include/hypercall-defs.c
@@ -150,7 +150,7 @@ update_va_mapping(unsigned int va, uint32_t lo, uint32_t hi, unsigned int flags)
physdev_op_compat(physdev_op_compat_t *uop)
update_va_mapping_otherdomain(unsigned int va, uint32_t lo, uint32_t hi, unsigned int flags, domid_t domid)
#endif
-#ifndef CONFIG_PV_SHIM_EXCLUSIVE
+#ifdef CONFIG_PLATFORM_OP
platform_op(compat_platform_op_t *u_xenpf_op)
#endif
#ifdef CONFIG_KEXEC
@@ -200,6 +200,8 @@ sysctl(xen_sysctl_t *u_sysctl)
#ifndef CONFIG_PV_SHIM_EXCLUSIVE
domctl(xen_domctl_t *u_domctl)
paging_domctl_cont(xen_domctl_t *u_domctl)
+#endif
+#ifdef CONFIG_PLATFORM_OP
platform_op(xen_platform_op_t *u_xenpf_op)
#endif
#ifdef CONFIG_HVM
@@ -236,7 +238,7 @@ stack_switch do:2 do:2 - - -
set_callbacks compat do - - -
fpu_taskswitch do do - - -
sched_op_compat do do - - dep
-#ifndef CONFIG_PV_SHIM_EXCLUSIVE
+#ifdef CONFIG_PLATFORM_OP
platform_op compat do compat do do
#endif
set_debugreg do do - - -
--
2.34.1