1. Patchew
  2. Xen
  3. View series

[PATCH for-4.20] automation: Use a different ImageBuilder repository URL

Michal Orzel posted 1 patch 2 months ago
Patches applied successfully (tree, apply log)
git fetch https://gitlab.com/xen-project/patchew/xen tags/patchew/20240709122117.48051-1-michal.orzel@amd.com
There is a newer version of this series
automation/scripts/qemu-smoke-dom0-arm32.sh       | 2 +-
automation/scripts/qemu-smoke-dom0-arm64.sh       | 2 +-
automation/scripts/qemu-smoke-dom0less-arm32.sh   | 2 +-
automation/scripts/qemu-smoke-dom0less-arm64.sh   | 2 +-
automation/scripts/qemu-xtf-dom0less-arm64.sh     | 2 +-
automation/scripts/xilinx-smoke-dom0less-arm64.sh | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
[PATCH for-4.20] automation: Use a different ImageBuilder repository URL
Posted by Michal Orzel 2 months ago 
Switch to using https://gitlab.com/xen-project/imagebuilder.git which
should be considered official ImageBuilder repo.

Signed-off-by: Michal Orzel <michal.orzel@amd.com>
---
 automation/scripts/qemu-smoke-dom0-arm32.sh       | 2 +-
 automation/scripts/qemu-smoke-dom0-arm64.sh       | 2 +-
 automation/scripts/qemu-smoke-dom0less-arm32.sh   | 2 +-
 automation/scripts/qemu-smoke-dom0less-arm64.sh   | 2 +-
 automation/scripts/qemu-xtf-dom0less-arm64.sh     | 2 +-
 automation/scripts/xilinx-smoke-dom0less-arm64.sh | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/automation/scripts/qemu-smoke-dom0-arm32.sh b/automation/scripts/qemu-smoke-dom0-arm32.sh
index d91648905669..5b62e3f691f1 100755
--- a/automation/scripts/qemu-smoke-dom0-arm32.sh
+++ b/automation/scripts/qemu-smoke-dom0-arm32.sh
@@ -73,7 +73,7 @@ UBOOT_SOURCE="boot.source"
 UBOOT_SCRIPT="boot.scr"' > config
 
 rm -rf imagebuilder
-git clone https://gitlab.com/ViryaOS/imagebuilder
+git clone https://gitlab.com/xen-project/imagebuilder.git
 bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
 
 rm -f ${serial_log}
diff --git a/automation/scripts/qemu-smoke-dom0-arm64.sh b/automation/scripts/qemu-smoke-dom0-arm64.sh
index e0bb37af3610..ca59bdec1b2b 100755
--- a/automation/scripts/qemu-smoke-dom0-arm64.sh
+++ b/automation/scripts/qemu-smoke-dom0-arm64.sh
@@ -87,7 +87,7 @@ LOAD_CMD="tftpb"
 UBOOT_SOURCE="boot.source"
 UBOOT_SCRIPT="boot.scr"' > binaries/config
 rm -rf imagebuilder
-git clone https://gitlab.com/ViryaOS/imagebuilder
+git clone https://gitlab.com/xen-project/imagebuilder.git
 bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
 
 
diff --git a/automation/scripts/qemu-smoke-dom0less-arm32.sh b/automation/scripts/qemu-smoke-dom0less-arm32.sh
index 1e2b939aadf7..11804cbd729f 100755
--- a/automation/scripts/qemu-smoke-dom0less-arm32.sh
+++ b/automation/scripts/qemu-smoke-dom0less-arm32.sh
@@ -125,7 +125,7 @@ if [[ "${test_variant}" == "without-dom0" ]]; then
 fi
 
 rm -rf imagebuilder
-git clone https://gitlab.com/ViryaOS/imagebuilder
+git clone https://gitlab.com/xen-project/imagebuilder.git
 bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
 
 # Run the test
diff --git a/automation/scripts/qemu-smoke-dom0less-arm64.sh b/automation/scripts/qemu-smoke-dom0less-arm64.sh
index 292c38a56147..4b548d1f8e54 100755
--- a/automation/scripts/qemu-smoke-dom0less-arm64.sh
+++ b/automation/scripts/qemu-smoke-dom0less-arm64.sh
@@ -198,7 +198,7 @@ NUM_CPUPOOLS=1' >> binaries/config
 fi
 
 rm -rf imagebuilder
-git clone https://gitlab.com/ViryaOS/imagebuilder
+git clone https://gitlab.com/xen-project/imagebuilder.git
 bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
 
 
diff --git a/automation/scripts/qemu-xtf-dom0less-arm64.sh b/automation/scripts/qemu-xtf-dom0less-arm64.sh
index a667e0412c92..59f926d35fb9 100755
--- a/automation/scripts/qemu-xtf-dom0less-arm64.sh
+++ b/automation/scripts/qemu-xtf-dom0less-arm64.sh
@@ -45,7 +45,7 @@ UBOOT_SOURCE="boot.source"
 UBOOT_SCRIPT="boot.scr"' > binaries/config
 
 rm -rf imagebuilder
-git clone https://gitlab.com/ViryaOS/imagebuilder
+git clone https://gitlab.com/xen-project/imagebuilder.git
 bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
 
 # Run the test
diff --git a/automation/scripts/xilinx-smoke-dom0less-arm64.sh b/automation/scripts/xilinx-smoke-dom0less-arm64.sh
index 4a071c6ef148..e3f7648d5031 100755
--- a/automation/scripts/xilinx-smoke-dom0less-arm64.sh
+++ b/automation/scripts/xilinx-smoke-dom0less-arm64.sh
@@ -122,7 +122,7 @@ if [[ "${test_variant}" == "gem-passthrough" ]]; then
 fi
 
 rm -rf imagebuilder
-git clone https://gitlab.com/ViryaOS/imagebuilder
+git clone https://gitlab.com/xen-project/imagebuilder.git
 bash imagebuilder/scripts/uboot-script-gen -t tftp -d $TFTP/ -c $TFTP/config
 
 # restart the board
-- 
2.25.1
Re: [PATCH for-4.20] automation: Use a different ImageBuilder repository URL
Posted by Alejandro Vallejo 2 months ago 
On Tue Jul 9, 2024 at 1:21 PM BST, Michal Orzel wrote:
> Switch to using https://gitlab.com/xen-project/imagebuilder.git which
> should be considered official ImageBuilder repo.
>
> Signed-off-by: Michal Orzel <michal.orzel@amd.com>
> ---
>  automation/scripts/qemu-smoke-dom0-arm32.sh       | 2 +-
>  automation/scripts/qemu-smoke-dom0-arm64.sh       | 2 +-
>  automation/scripts/qemu-smoke-dom0less-arm32.sh   | 2 +-
>  automation/scripts/qemu-smoke-dom0less-arm64.sh   | 2 +-
>  automation/scripts/qemu-xtf-dom0less-arm64.sh     | 2 +-
>  automation/scripts/xilinx-smoke-dom0less-arm64.sh | 2 +-
>  6 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/automation/scripts/qemu-smoke-dom0-arm32.sh b/automation/scripts/qemu-smoke-dom0-arm32.sh
> index d91648905669..5b62e3f691f1 100755
> --- a/automation/scripts/qemu-smoke-dom0-arm32.sh
> +++ b/automation/scripts/qemu-smoke-dom0-arm32.sh
> @@ -73,7 +73,7 @@ UBOOT_SOURCE="boot.source"
>  UBOOT_SCRIPT="boot.scr"' > config
>  
>  rm -rf imagebuilder
> -git clone https://gitlab.com/ViryaOS/imagebuilder
> +git clone https://gitlab.com/xen-project/imagebuilder.git

For this clone and all others:

You probably want "git clone --depth 1 <url>" to pull the tip of the repo and
not its history.

>  bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
>  
>  rm -f ${serial_log}
> diff --git a/automation/scripts/qemu-smoke-dom0-arm64.sh b/automation/scripts/qemu-smoke-dom0-arm64.sh
> index e0bb37af3610..ca59bdec1b2b 100755
> --- a/automation/scripts/qemu-smoke-dom0-arm64.sh
> +++ b/automation/scripts/qemu-smoke-dom0-arm64.sh
> @@ -87,7 +87,7 @@ LOAD_CMD="tftpb"
>  UBOOT_SOURCE="boot.source"
>  UBOOT_SCRIPT="boot.scr"' > binaries/config
>  rm -rf imagebuilder
> -git clone https://gitlab.com/ViryaOS/imagebuilder
> +git clone https://gitlab.com/xen-project/imagebuilder.git
>  bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
>  
>  
> diff --git a/automation/scripts/qemu-smoke-dom0less-arm32.sh b/automation/scripts/qemu-smoke-dom0less-arm32.sh
> index 1e2b939aadf7..11804cbd729f 100755
> --- a/automation/scripts/qemu-smoke-dom0less-arm32.sh
> +++ b/automation/scripts/qemu-smoke-dom0less-arm32.sh
> @@ -125,7 +125,7 @@ if [[ "${test_variant}" == "without-dom0" ]]; then
>  fi
>  
>  rm -rf imagebuilder
> -git clone https://gitlab.com/ViryaOS/imagebuilder
> +git clone https://gitlab.com/xen-project/imagebuilder.git
>  bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
>  
>  # Run the test
> diff --git a/automation/scripts/qemu-smoke-dom0less-arm64.sh b/automation/scripts/qemu-smoke-dom0less-arm64.sh
> index 292c38a56147..4b548d1f8e54 100755
> --- a/automation/scripts/qemu-smoke-dom0less-arm64.sh
> +++ b/automation/scripts/qemu-smoke-dom0less-arm64.sh
> @@ -198,7 +198,7 @@ NUM_CPUPOOLS=1' >> binaries/config
>  fi
>  
>  rm -rf imagebuilder
> -git clone https://gitlab.com/ViryaOS/imagebuilder
> +git clone https://gitlab.com/xen-project/imagebuilder.git
>  bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
>  
>  
> diff --git a/automation/scripts/qemu-xtf-dom0less-arm64.sh b/automation/scripts/qemu-xtf-dom0less-arm64.sh
> index a667e0412c92..59f926d35fb9 100755
> --- a/automation/scripts/qemu-xtf-dom0less-arm64.sh
> +++ b/automation/scripts/qemu-xtf-dom0less-arm64.sh
> @@ -45,7 +45,7 @@ UBOOT_SOURCE="boot.source"
>  UBOOT_SCRIPT="boot.scr"' > binaries/config
>  
>  rm -rf imagebuilder
> -git clone https://gitlab.com/ViryaOS/imagebuilder
> +git clone https://gitlab.com/xen-project/imagebuilder.git
>  bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
>  
>  # Run the test
> diff --git a/automation/scripts/xilinx-smoke-dom0less-arm64.sh b/automation/scripts/xilinx-smoke-dom0less-arm64.sh
> index 4a071c6ef148..e3f7648d5031 100755
> --- a/automation/scripts/xilinx-smoke-dom0less-arm64.sh
> +++ b/automation/scripts/xilinx-smoke-dom0less-arm64.sh
> @@ -122,7 +122,7 @@ if [[ "${test_variant}" == "gem-passthrough" ]]; then
>  fi
>  
>  rm -rf imagebuilder
> -git clone https://gitlab.com/ViryaOS/imagebuilder
> +git clone https://gitlab.com/xen-project/imagebuilder.git
>  bash imagebuilder/scripts/uboot-script-gen -t tftp -d $TFTP/ -c $TFTP/config
>  
>  # restart the board

Cheers,
Alejandro
Re: [PATCH for-4.20] automation: Use a different ImageBuilder repository URL
Posted by Stefano Stabellini 1 month, 4 weeks ago 
On Tue, 9 Jul 2024, Alejandro Vallejo wrote:
> On Tue Jul 9, 2024 at 1:21 PM BST, Michal Orzel wrote:
> > Switch to using https://gitlab.com/xen-project/imagebuilder.git which
> > should be considered official ImageBuilder repo.
> >
> > Signed-off-by: Michal Orzel <michal.orzel@amd.com>
> > ---
> >  automation/scripts/qemu-smoke-dom0-arm32.sh       | 2 +-
> >  automation/scripts/qemu-smoke-dom0-arm64.sh       | 2 +-
> >  automation/scripts/qemu-smoke-dom0less-arm32.sh   | 2 +-
> >  automation/scripts/qemu-smoke-dom0less-arm64.sh   | 2 +-
> >  automation/scripts/qemu-xtf-dom0less-arm64.sh     | 2 +-
> >  automation/scripts/xilinx-smoke-dom0less-arm64.sh | 2 +-
> >  6 files changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/automation/scripts/qemu-smoke-dom0-arm32.sh b/automation/scripts/qemu-smoke-dom0-arm32.sh
> > index d91648905669..5b62e3f691f1 100755
> > --- a/automation/scripts/qemu-smoke-dom0-arm32.sh
> > +++ b/automation/scripts/qemu-smoke-dom0-arm32.sh
> > @@ -73,7 +73,7 @@ UBOOT_SOURCE="boot.source"
> >  UBOOT_SCRIPT="boot.scr"' > config
> >  
> >  rm -rf imagebuilder
> > -git clone https://gitlab.com/ViryaOS/imagebuilder
> > +git clone https://gitlab.com/xen-project/imagebuilder.git
> 
> For this clone and all others:
> 
> You probably want "git clone --depth 1 <url>" to pull the tip of the repo and
> not its history.

That's a good idea. You can add my

Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>


> >  bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
> >  
> >  rm -f ${serial_log}
> > diff --git a/automation/scripts/qemu-smoke-dom0-arm64.sh b/automation/scripts/qemu-smoke-dom0-arm64.sh
> > index e0bb37af3610..ca59bdec1b2b 100755
> > --- a/automation/scripts/qemu-smoke-dom0-arm64.sh
> > +++ b/automation/scripts/qemu-smoke-dom0-arm64.sh
> > @@ -87,7 +87,7 @@ LOAD_CMD="tftpb"
> >  UBOOT_SOURCE="boot.source"
> >  UBOOT_SCRIPT="boot.scr"' > binaries/config
> >  rm -rf imagebuilder
> > -git clone https://gitlab.com/ViryaOS/imagebuilder
> > +git clone https://gitlab.com/xen-project/imagebuilder.git
> >  bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
> >  
> >  
> > diff --git a/automation/scripts/qemu-smoke-dom0less-arm32.sh b/automation/scripts/qemu-smoke-dom0less-arm32.sh
> > index 1e2b939aadf7..11804cbd729f 100755
> > --- a/automation/scripts/qemu-smoke-dom0less-arm32.sh
> > +++ b/automation/scripts/qemu-smoke-dom0less-arm32.sh
> > @@ -125,7 +125,7 @@ if [[ "${test_variant}" == "without-dom0" ]]; then
> >  fi
> >  
> >  rm -rf imagebuilder
> > -git clone https://gitlab.com/ViryaOS/imagebuilder
> > +git clone https://gitlab.com/xen-project/imagebuilder.git
> >  bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
> >  
> >  # Run the test
> > diff --git a/automation/scripts/qemu-smoke-dom0less-arm64.sh b/automation/scripts/qemu-smoke-dom0less-arm64.sh
> > index 292c38a56147..4b548d1f8e54 100755
> > --- a/automation/scripts/qemu-smoke-dom0less-arm64.sh
> > +++ b/automation/scripts/qemu-smoke-dom0less-arm64.sh
> > @@ -198,7 +198,7 @@ NUM_CPUPOOLS=1' >> binaries/config
> >  fi
> >  
> >  rm -rf imagebuilder
> > -git clone https://gitlab.com/ViryaOS/imagebuilder
> > +git clone https://gitlab.com/xen-project/imagebuilder.git
> >  bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
> >  
> >  
> > diff --git a/automation/scripts/qemu-xtf-dom0less-arm64.sh b/automation/scripts/qemu-xtf-dom0less-arm64.sh
> > index a667e0412c92..59f926d35fb9 100755
> > --- a/automation/scripts/qemu-xtf-dom0less-arm64.sh
> > +++ b/automation/scripts/qemu-xtf-dom0less-arm64.sh
> > @@ -45,7 +45,7 @@ UBOOT_SOURCE="boot.source"
> >  UBOOT_SCRIPT="boot.scr"' > binaries/config
> >  
> >  rm -rf imagebuilder
> > -git clone https://gitlab.com/ViryaOS/imagebuilder
> > +git clone https://gitlab.com/xen-project/imagebuilder.git
> >  bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config
> >  
> >  # Run the test
> > diff --git a/automation/scripts/xilinx-smoke-dom0less-arm64.sh b/automation/scripts/xilinx-smoke-dom0less-arm64.sh
> > index 4a071c6ef148..e3f7648d5031 100755
> > --- a/automation/scripts/xilinx-smoke-dom0less-arm64.sh
> > +++ b/automation/scripts/xilinx-smoke-dom0less-arm64.sh
> > @@ -122,7 +122,7 @@ if [[ "${test_variant}" == "gem-passthrough" ]]; then
> >  fi
> >  
> >  rm -rf imagebuilder
> > -git clone https://gitlab.com/ViryaOS/imagebuilder
> > +git clone https://gitlab.com/xen-project/imagebuilder.git
> >  bash imagebuilder/scripts/uboot-script-gen -t tftp -d $TFTP/ -c $TFTP/config
> >  
> >  # restart the board
> 
> Cheers,
> Alejandro
>
Re: [PATCH for-4.20] automation: Use a different ImageBuilder repository URL
Posted by Michal Orzel 1 month, 4 weeks ago 

On 10/07/2024 01:46, Stefano Stabellini wrote:
> 
> 
> On Tue, 9 Jul 2024, Alejandro Vallejo wrote:
>> On Tue Jul 9, 2024 at 1:21 PM BST, Michal Orzel wrote:
>>> Switch to using https://gitlab.com/xen-project/imagebuilder.git which
>>> should be considered official ImageBuilder repo.
>>>
>>> Signed-off-by: Michal Orzel <michal.orzel@amd.com>
>>> ---
>>>  automation/scripts/qemu-smoke-dom0-arm32.sh       | 2 +-
>>>  automation/scripts/qemu-smoke-dom0-arm64.sh       | 2 +-
>>>  automation/scripts/qemu-smoke-dom0less-arm32.sh   | 2 +-
>>>  automation/scripts/qemu-smoke-dom0less-arm64.sh   | 2 +-
>>>  automation/scripts/qemu-xtf-dom0less-arm64.sh     | 2 +-
>>>  automation/scripts/xilinx-smoke-dom0less-arm64.sh | 2 +-
>>>  6 files changed, 6 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/automation/scripts/qemu-smoke-dom0-arm32.sh b/automation/scripts/qemu-smoke-dom0-arm32.sh
>>> index d91648905669..5b62e3f691f1 100755
>>> --- a/automation/scripts/qemu-smoke-dom0-arm32.sh
>>> +++ b/automation/scripts/qemu-smoke-dom0-arm32.sh
>>> @@ -73,7 +73,7 @@ UBOOT_SOURCE="boot.source"
>>>  UBOOT_SCRIPT="boot.scr"' > config
>>>
>>>  rm -rf imagebuilder
>>> -git clone https://gitlab.com/ViryaOS/imagebuilder
>>> +git clone https://gitlab.com/xen-project/imagebuilder.git
>>
>> For this clone and all others:
>>
>> You probably want "git clone --depth 1 <url>" to pull the tip of the repo and
>> not its history.
> 
> That's a good idea. You can add my
> 
> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Ok, I'll send a v2.

~Michal

Patchew 2.1-devel-b67e4c2

© 2016 - 2024 Red Hat, Inc.