1. Patchew
  2. Xen
  3. View series

[PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE

Michal Orzel posted 1 patch 4 years, 11 months ago
Test gitlab-ci failed
Patches applied successfully (tree, apply log)
git fetch https://gitlab.com/xen-project/patchew/xen tags/patchew/20210310065803.348-1-michal.orzel@arm.com
There is a newer version of this series
xen/arch/arm/Makefile | 5 ++---
xen/common/Kconfig    | 8 ++++++++
2 files changed, 10 insertions(+), 3 deletions(-)
[PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Michal Orzel 4 years, 11 months ago 
Currently in order to link existing DTB into Xen image
we need to either specify option CONFIG_DTB_FILE on the
command line or manually add it into .config.
Add Kconfig entry: CONFIG_DTB_FILE to be able to
provide the path to DTB we want to embed into Xen image.
If no path provided - the dtb will not be embedded.

Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
as it is not needed since Kconfig will define it in a header
with all the other config options.

Signed-off-by: Michal Orzel <michal.orzel@arm.com>
---
 xen/arch/arm/Makefile | 5 ++---
 xen/common/Kconfig    | 8 ++++++++
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
index 16e6523e2c..46e6a95fec 100644
--- a/xen/arch/arm/Makefile
+++ b/xen/arch/arm/Makefile
@@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
 
 #obj-bin-y += ....o
 
-ifdef CONFIG_DTB_FILE
+ifneq ($(CONFIG_DTB_FILE),"")
 obj-y += dtb.o
-AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
 endif
 
 ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
@@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
 xen.lds: xen.lds.S
 	$(CPP) -P $(a_flags) -MQ $@ -o $@ $<
 
-dtb.o: $(CONFIG_DTB_FILE)
+dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
 
 .PHONY: clean
 clean::
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index eb953d171e..a27836bf47 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -400,6 +400,14 @@ config DOM0_MEM
 
 	  Leave empty if you are not sure what to specify.
 
+config DTB_FILE
+	string "Absolute path to device tree blob"
+	depends on HAS_DEVICE_TREE
+	---help---
+	  When using a bootloader that has no device tree support or when there
+	  is no bootloader at all, use this option to specify the absolute path
+	  to a device tree that will be linked directly inside Xen binary.
+
 config TRACEBUFFER
 	bool "Enable tracing infrastructure" if EXPERT
 	default y
-- 
2.29.0
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Jan Beulich 4 years, 11 months ago 
On 10.03.2021 07:58, Michal Orzel wrote:
> --- a/xen/common/Kconfig
> +++ b/xen/common/Kconfig
> @@ -400,6 +400,14 @@ config DOM0_MEM
>  
>  	  Leave empty if you are not sure what to specify.
>  
> +config DTB_FILE
> +	string "Absolute path to device tree blob"
> +	depends on HAS_DEVICE_TREE
> +	---help---
> +	  When using a bootloader that has no device tree support or when there
> +	  is no bootloader at all, use this option to specify the absolute path
> +	  to a device tree that will be linked directly inside Xen binary.

Nit: Linux, iirc, has dropped support for ---help--- (allowing
only help now). To limit churn whenever we're going to re-sync
our kconfig again, I'd like to avoid introduction of new uses
of the old form. I'm sure this could be taken care of while
committing.

Jan
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Ian Jackson 4 years, 11 months ago 
Jan Beulich writes ("Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE"):
> Nit: Linux, iirc, has dropped support for ---help--- (allowing
> only help now). To limit churn whenever we're going to re-sync
> our kconfig again, I'd like to avoid introduction of new uses
> of the old form. I'm sure this could be taken care of while
> committing.

At this stage of the release I would prefer to avoid updates made by
the committer when committing.  Ie the thing that is committed should
have been previously posted and had at least some minimal time to spot
howlers.

Thanks,
Ian.
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Julien Grall 4 years, 11 months ago 
Hi Ian,

On 10/03/2021 11:33, Ian Jackson wrote:
> Jan Beulich writes ("Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE"):
>> Nit: Linux, iirc, has dropped support for ---help--- (allowing
>> only help now). To limit churn whenever we're going to re-sync
>> our kconfig again, I'd like to avoid introduction of new uses
>> of the old form. I'm sure this could be taken care of while
>> committing.
> 
> At this stage of the release I would prefer to avoid updates made by
> the committer when committing.  Ie the thing that is committed should
> have been previously posted and had at least some minimal time to spot
> howlers.

I was under the impression that this patch would not target 4.15. At 
least I didn't see any request for it.

Cheers,

-- 
Julien Grall
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Ian Jackson 4 years, 11 months ago 
Julien Grall writes ("Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE"):
> I was under the impression that this patch would not target 4.15. At 
> least I didn't see any request for it.

OK, good :-).

Thanks,
Ian.
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Michal Orzel 4 years, 11 months ago 

On 10.03.2021 14:36, Ian Jackson wrote:
> Julien Grall writes ("Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE"):
>> I was under the impression that this patch would not target 4.15. At 
>> least I didn't see any request for it.
> 
> OK, good :-).
> 
> Thanks,
> Ian.
> 
So do you guys want me to push v5 now with fix "help" or will the commiter do this?

Michal
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Julien Grall 4 years, 11 months ago 
Hi Michal,

On 10/03/2021 06:58, Michal Orzel wrote:
> Currently in order to link existing DTB into Xen image
> we need to either specify option CONFIG_DTB_FILE on the
> command line or manually add it into .config.
> Add Kconfig entry: CONFIG_DTB_FILE to be able to
> provide the path to DTB we want to embed into Xen image.
> If no path provided - the dtb will not be embedded.
> 
> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
> as it is not needed since Kconfig will define it in a header
> with all the other config options.
> 
> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
> ---
>   xen/arch/arm/Makefile | 5 ++---
>   xen/common/Kconfig    | 8 ++++++++
>   2 files changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
> index 16e6523e2c..46e6a95fec 100644
> --- a/xen/arch/arm/Makefile
> +++ b/xen/arch/arm/Makefile
> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
>   
>   #obj-bin-y += ....o
>   
> -ifdef CONFIG_DTB_FILE
> +ifneq ($(CONFIG_DTB_FILE),"")
>   obj-y += dtb.o
> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>   endif
>   
>   ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
>   xen.lds: xen.lds.S
>   	$(CPP) -P $(a_flags) -MQ $@ -o $@ $<
>   
> -dtb.o: $(CONFIG_DTB_FILE)
> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
>   
>   .PHONY: clean
>   clean::
> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
> index eb953d171e..a27836bf47 100644
> --- a/xen/common/Kconfig
> +++ b/xen/common/Kconfig
> @@ -400,6 +400,14 @@ config DOM0_MEM
>   
>   	  Leave empty if you are not sure what to specify.
>   
> +config DTB_FILE
> +	string "Absolute path to device tree blob"
> +	depends on HAS_DEVICE_TREE
> +	---help---
> +	  When using a bootloader that has no device tree support or when there
> +	  is no bootloader at all, use this option to specify the absolute path
> +	  to a device tree that will be linked directly inside Xen binary.

With this approach, CONFIG_DTB_FILE will always be defined. This means 
that Xen will always be compiled to use the "embedded" DTB. When the 
string is "", it will be garbagge.

So I think we need a second config to that indicates whether the string 
is empty or not.

Interestingly, your first version of patch didn't expose the problem 
because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is 
not selected. Although, it would still happily build if CONFIG_DTB_FILE 
is "".

Cheers,

-- 
Julien Grall
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Michal Orzel 4 years, 11 months ago 
Hi Julien,

On 11.03.2021 11:34, Julien Grall wrote:
> Hi Michal,
> 
> On 10/03/2021 06:58, Michal Orzel wrote:
>> Currently in order to link existing DTB into Xen image
>> we need to either specify option CONFIG_DTB_FILE on the
>> command line or manually add it into .config.
>> Add Kconfig entry: CONFIG_DTB_FILE to be able to
>> provide the path to DTB we want to embed into Xen image.
>> If no path provided - the dtb will not be embedded.
>>
>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>> as it is not needed since Kconfig will define it in a header
>> with all the other config options.
>>
>> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
>> ---
>>   xen/arch/arm/Makefile | 5 ++---
>>   xen/common/Kconfig    | 8 ++++++++
>>   2 files changed, 10 insertions(+), 3 deletions(-)
>>
>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
>> index 16e6523e2c..46e6a95fec 100644
>> --- a/xen/arch/arm/Makefile
>> +++ b/xen/arch/arm/Makefile
>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
>>     #obj-bin-y += ....o
>>   -ifdef CONFIG_DTB_FILE
>> +ifneq ($(CONFIG_DTB_FILE),"")
>>   obj-y += dtb.o
>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>   endif
>>     ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
>>   xen.lds: xen.lds.S
>>       $(CPP) -P $(a_flags) -MQ $@ -o $@ $<
>>   -dtb.o: $(CONFIG_DTB_FILE)
>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
>>     .PHONY: clean
>>   clean::
>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
>> index eb953d171e..a27836bf47 100644
>> --- a/xen/common/Kconfig
>> +++ b/xen/common/Kconfig
>> @@ -400,6 +400,14 @@ config DOM0_MEM
>>           Leave empty if you are not sure what to specify.
>>   +config DTB_FILE
>> +    string "Absolute path to device tree blob"
>> +    depends on HAS_DEVICE_TREE
>> +    ---help---
>> +      When using a bootloader that has no device tree support or when there
>> +      is no bootloader at all, use this option to specify the absolute path
>> +      to a device tree that will be linked directly inside Xen binary.
> 
> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge.
> 
> So I think we need a second config to that indicates whether the string is empty or not.
> 
> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "".
> 
> Cheers,
> 
I do not agrree. We do not need another config.
If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary.
The dtb.o will be compiled and embedded into Xen if and only if the path to dtb was given.

Cheers,
Michal
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Julien Grall 4 years, 11 months ago 

On 11/03/2021 10:41, Michal Orzel wrote:
> Hi Julien,

Hi,

> 
> On 11.03.2021 11:34, Julien Grall wrote:
>> Hi Michal,
>>
>> On 10/03/2021 06:58, Michal Orzel wrote:
>>> Currently in order to link existing DTB into Xen image
>>> we need to either specify option CONFIG_DTB_FILE on the
>>> command line or manually add it into .config.
>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to
>>> provide the path to DTB we want to embed into Xen image.
>>> If no path provided - the dtb will not be embedded.
>>>
>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>> as it is not needed since Kconfig will define it in a header
>>> with all the other config options.
>>>
>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
>>> ---
>>>    xen/arch/arm/Makefile | 5 ++---
>>>    xen/common/Kconfig    | 8 ++++++++
>>>    2 files changed, 10 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
>>> index 16e6523e2c..46e6a95fec 100644
>>> --- a/xen/arch/arm/Makefile
>>> +++ b/xen/arch/arm/Makefile
>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
>>>      #obj-bin-y += ....o
>>>    -ifdef CONFIG_DTB_FILE
>>> +ifneq ($(CONFIG_DTB_FILE),"")
>>>    obj-y += dtb.o
>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>    endif
>>>      ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
>>>    xen.lds: xen.lds.S
>>>        $(CPP) -P $(a_flags) -MQ $@ -o $@ $<
>>>    -dtb.o: $(CONFIG_DTB_FILE)
>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
>>>      .PHONY: clean
>>>    clean::
>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
>>> index eb953d171e..a27836bf47 100644
>>> --- a/xen/common/Kconfig
>>> +++ b/xen/common/Kconfig
>>> @@ -400,6 +400,14 @@ config DOM0_MEM
>>>            Leave empty if you are not sure what to specify.
>>>    +config DTB_FILE
>>> +    string "Absolute path to device tree blob"
>>> +    depends on HAS_DEVICE_TREE
>>> +    ---help---
>>> +      When using a bootloader that has no device tree support or when there
>>> +      is no bootloader at all, use this option to specify the absolute path
>>> +      to a device tree that will be linked directly inside Xen binary.
>>
>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge.
>>
>> So I think we need a second config to that indicates whether the string is empty or not.
>>
>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "".
>>
>> Cheers,
>>
> I do not agrree. We do not need another config.

Did you test that Xen will still boot if the string is empty?

> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary.

The dtb.o will not be created but the section will because the linker 
use #ifdef CONFIG_DTB_FILE:

42sh> grep CONFIG_DTB .config
CONFIG_DTB_FILE=""
42sh> nm xen-syms | grep _sdtb
00000000003560f8 B _sdtb

And to show this is going to be used:

42sh> git diff
diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
index 5d44667bd89d..2b680b8226d2 100644
--- a/xen/arch/arm/arm64/head.S
+++ b/xen/arch/arm/arm64/head.S
@@ -297,6 +297,7 @@ real_start_efi:

          /* Using the DTB in the .dtb section? */
  #ifdef CONFIG_DTB_FILE
+        e
          load_paddr x21, _sdtb
  #endif

42hs> make
[...]
   CC      arm64/head.o
arm64/head.S: Assembler messages:
arm64/head.S:300: Error: unknown mnemonic `e' -- `e'
/home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for 
target 'arm64/head.o' failed

So _sdtb is going to always be used...

Cheers,

-- 
Julien Grall
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Michal Orzel 4 years, 11 months ago 

On 11.03.2021 12:11, Julien Grall wrote:
> 
> 
> On 11/03/2021 10:41, Michal Orzel wrote:
>> Hi Julien,
> 
> Hi,
> 
>>
>> On 11.03.2021 11:34, Julien Grall wrote:
>>> Hi Michal,
>>>
>>> On 10/03/2021 06:58, Michal Orzel wrote:
>>>> Currently in order to link existing DTB into Xen image
>>>> we need to either specify option CONFIG_DTB_FILE on the
>>>> command line or manually add it into .config.
>>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to
>>>> provide the path to DTB we want to embed into Xen image.
>>>> If no path provided - the dtb will not be embedded.
>>>>
>>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>> as it is not needed since Kconfig will define it in a header
>>>> with all the other config options.
>>>>
>>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
>>>> ---
>>>>    xen/arch/arm/Makefile | 5 ++---
>>>>    xen/common/Kconfig    | 8 ++++++++
>>>>    2 files changed, 10 insertions(+), 3 deletions(-)
>>>>
>>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
>>>> index 16e6523e2c..46e6a95fec 100644
>>>> --- a/xen/arch/arm/Makefile
>>>> +++ b/xen/arch/arm/Makefile
>>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
>>>>      #obj-bin-y += ....o
>>>>    -ifdef CONFIG_DTB_FILE
>>>> +ifneq ($(CONFIG_DTB_FILE),"")
>>>>    obj-y += dtb.o
>>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>>    endif
>>>>      ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
>>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
>>>>    xen.lds: xen.lds.S
>>>>        $(CPP) -P $(a_flags) -MQ $@ -o $@ $<
>>>>    -dtb.o: $(CONFIG_DTB_FILE)
>>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
>>>>      .PHONY: clean
>>>>    clean::
>>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
>>>> index eb953d171e..a27836bf47 100644
>>>> --- a/xen/common/Kconfig
>>>> +++ b/xen/common/Kconfig
>>>> @@ -400,6 +400,14 @@ config DOM0_MEM
>>>>            Leave empty if you are not sure what to specify.
>>>>    +config DTB_FILE
>>>> +    string "Absolute path to device tree blob"
>>>> +    depends on HAS_DEVICE_TREE
>>>> +    ---help---
>>>> +      When using a bootloader that has no device tree support or when there
>>>> +      is no bootloader at all, use this option to specify the absolute path
>>>> +      to a device tree that will be linked directly inside Xen binary.
>>>
>>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge.
>>>
>>> So I think we need a second config to that indicates whether the string is empty or not.
>>>
>>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "".
>>>
>>> Cheers,
>>>
>> I do not agrree. We do not need another config.
> 
> Did you test that Xen will still boot if the string is empty?
> 
>> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary.
> 
> The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE:
> 
> 42sh> grep CONFIG_DTB .config
> CONFIG_DTB_FILE=""
> 42sh> nm xen-syms | grep _sdtb
> 00000000003560f8 B _sdtb
> 
> And to show this is going to be used:
> 
> 42sh> git diff
> diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
> index 5d44667bd89d..2b680b8226d2 100644
> --- a/xen/arch/arm/arm64/head.S
> +++ b/xen/arch/arm/arm64/head.S
> @@ -297,6 +297,7 @@ real_start_efi:
> 
>          /* Using the DTB in the .dtb section? */
>  #ifdef CONFIG_DTB_FILE
> +        e
>          load_paddr x21, _sdtb
>  #endif
> 
> 42hs> make
> [...]
>   CC      arm64/head.o
> arm64/head.S: Assembler messages:
> arm64/head.S:300: Error: unknown mnemonic `e' -- `e'
> /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed
> 
> So _sdtb is going to always be used...
> 
> Cheers,
> 

Yes you are right. So I could add another config like:
config DTB_VALID
	def_bool y if DTB_FILE != ""
and change all the lines containing:
#ifdef CONFIG_DTB_FILE
to
#ifdef CONFIG_DTB_VALID

What do u think?

Michal
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Jan Beulich 4 years, 11 months ago 
On 11.03.2021 13:39, Michal Orzel wrote:
> On 11.03.2021 12:11, Julien Grall wrote:
>> On 11/03/2021 10:41, Michal Orzel wrote:
>>> On 11.03.2021 11:34, Julien Grall wrote:
>>>> On 10/03/2021 06:58, Michal Orzel wrote:
>>>>> Currently in order to link existing DTB into Xen image
>>>>> we need to either specify option CONFIG_DTB_FILE on the
>>>>> command line or manually add it into .config.
>>>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to
>>>>> provide the path to DTB we want to embed into Xen image.
>>>>> If no path provided - the dtb will not be embedded.
>>>>>
>>>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>>> as it is not needed since Kconfig will define it in a header
>>>>> with all the other config options.
>>>>>
>>>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
>>>>> ---
>>>>>    xen/arch/arm/Makefile | 5 ++---
>>>>>    xen/common/Kconfig    | 8 ++++++++
>>>>>    2 files changed, 10 insertions(+), 3 deletions(-)
>>>>>
>>>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
>>>>> index 16e6523e2c..46e6a95fec 100644
>>>>> --- a/xen/arch/arm/Makefile
>>>>> +++ b/xen/arch/arm/Makefile
>>>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
>>>>>      #obj-bin-y += ....o
>>>>>    -ifdef CONFIG_DTB_FILE
>>>>> +ifneq ($(CONFIG_DTB_FILE),"")
>>>>>    obj-y += dtb.o
>>>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>>>    endif
>>>>>      ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
>>>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
>>>>>    xen.lds: xen.lds.S
>>>>>        $(CPP) -P $(a_flags) -MQ $@ -o $@ $<
>>>>>    -dtb.o: $(CONFIG_DTB_FILE)
>>>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
>>>>>      .PHONY: clean
>>>>>    clean::
>>>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
>>>>> index eb953d171e..a27836bf47 100644
>>>>> --- a/xen/common/Kconfig
>>>>> +++ b/xen/common/Kconfig
>>>>> @@ -400,6 +400,14 @@ config DOM0_MEM
>>>>>            Leave empty if you are not sure what to specify.
>>>>>    +config DTB_FILE
>>>>> +    string "Absolute path to device tree blob"
>>>>> +    depends on HAS_DEVICE_TREE
>>>>> +    ---help---
>>>>> +      When using a bootloader that has no device tree support or when there
>>>>> +      is no bootloader at all, use this option to specify the absolute path
>>>>> +      to a device tree that will be linked directly inside Xen binary.
>>>>
>>>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge.
>>>>
>>>> So I think we need a second config to that indicates whether the string is empty or not.
>>>>
>>>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "".
>>>>
>>>> Cheers,
>>>>
>>> I do not agrree. We do not need another config.
>>
>> Did you test that Xen will still boot if the string is empty?
>>
>>> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary.
>>
>> The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE:
>>
>> 42sh> grep CONFIG_DTB .config
>> CONFIG_DTB_FILE=""
>> 42sh> nm xen-syms | grep _sdtb
>> 00000000003560f8 B _sdtb
>>
>> And to show this is going to be used:
>>
>> 42sh> git diff
>> diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
>> index 5d44667bd89d..2b680b8226d2 100644
>> --- a/xen/arch/arm/arm64/head.S
>> +++ b/xen/arch/arm/arm64/head.S
>> @@ -297,6 +297,7 @@ real_start_efi:
>>
>>          /* Using the DTB in the .dtb section? */
>>  #ifdef CONFIG_DTB_FILE
>> +        e
>>          load_paddr x21, _sdtb
>>  #endif
>>
>> 42hs> make
>> [...]
>>   CC      arm64/head.o
>> arm64/head.S: Assembler messages:
>> arm64/head.S:300: Error: unknown mnemonic `e' -- `e'
>> /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed
>>
>> So _sdtb is going to always be used...
>>
>> Cheers,
>>
> 
> Yes you are right. So I could add another config like:
> config DTB_VALID
> 	def_bool y if DTB_FILE != ""
> and change all the lines containing:
> #ifdef CONFIG_DTB_FILE
> to
> #ifdef CONFIG_DTB_VALID

I'm sorry to jump in again, but I still think a 2nd Kconfig setting
is not needed. I count three uses of CONFIG_DTB_VALID outside of
make files. The ones in .S can be replaced by using assembler
directives .ifeqs / .ifneqs. And the one in xen.lds.S looks to be
unnecessary altogether: If there's no input .dtb section, the
linker wouldn't allocate an output one anyway. And the _sdtb symbol,
if you want to avoid its creation when there's no reference, could
be wrapped in PROVIDE(). (I also think that symbol should be
defined inside the section definition, not ahead of it.)

Jan
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Julien Grall 4 years, 11 months ago 
Hi,

On 11/03/2021 13:10, Jan Beulich wrote:
> On 11.03.2021 13:39, Michal Orzel wrote:
>> On 11.03.2021 12:11, Julien Grall wrote:
>>> On 11/03/2021 10:41, Michal Orzel wrote:
>>>> On 11.03.2021 11:34, Julien Grall wrote:
>>>>> On 10/03/2021 06:58, Michal Orzel wrote:
>>>>>> Currently in order to link existing DTB into Xen image
>>>>>> we need to either specify option CONFIG_DTB_FILE on the
>>>>>> command line or manually add it into .config.
>>>>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to
>>>>>> provide the path to DTB we want to embed into Xen image.
>>>>>> If no path provided - the dtb will not be embedded.
>>>>>>
>>>>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>>>> as it is not needed since Kconfig will define it in a header
>>>>>> with all the other config options.
>>>>>>
>>>>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
>>>>>> ---
>>>>>>     xen/arch/arm/Makefile | 5 ++---
>>>>>>     xen/common/Kconfig    | 8 ++++++++
>>>>>>     2 files changed, 10 insertions(+), 3 deletions(-)
>>>>>>
>>>>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
>>>>>> index 16e6523e2c..46e6a95fec 100644
>>>>>> --- a/xen/arch/arm/Makefile
>>>>>> +++ b/xen/arch/arm/Makefile
>>>>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
>>>>>>       #obj-bin-y += ....o
>>>>>>     -ifdef CONFIG_DTB_FILE
>>>>>> +ifneq ($(CONFIG_DTB_FILE),"")
>>>>>>     obj-y += dtb.o
>>>>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>>>>     endif
>>>>>>       ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
>>>>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
>>>>>>     xen.lds: xen.lds.S
>>>>>>         $(CPP) -P $(a_flags) -MQ $@ -o $@ $<
>>>>>>     -dtb.o: $(CONFIG_DTB_FILE)
>>>>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
>>>>>>       .PHONY: clean
>>>>>>     clean::
>>>>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
>>>>>> index eb953d171e..a27836bf47 100644
>>>>>> --- a/xen/common/Kconfig
>>>>>> +++ b/xen/common/Kconfig
>>>>>> @@ -400,6 +400,14 @@ config DOM0_MEM
>>>>>>             Leave empty if you are not sure what to specify.
>>>>>>     +config DTB_FILE
>>>>>> +    string "Absolute path to device tree blob"
>>>>>> +    depends on HAS_DEVICE_TREE
>>>>>> +    ---help---
>>>>>> +      When using a bootloader that has no device tree support or when there
>>>>>> +      is no bootloader at all, use this option to specify the absolute path
>>>>>> +      to a device tree that will be linked directly inside Xen binary.
>>>>>
>>>>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge.
>>>>>
>>>>> So I think we need a second config to that indicates whether the string is empty or not.
>>>>>
>>>>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "".
>>>>>
>>>>> Cheers,
>>>>>
>>>> I do not agrree. We do not need another config.
>>>
>>> Did you test that Xen will still boot if the string is empty?
>>>
>>>> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary.
>>>
>>> The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE:
>>>
>>> 42sh> grep CONFIG_DTB .config
>>> CONFIG_DTB_FILE=""
>>> 42sh> nm xen-syms | grep _sdtb
>>> 00000000003560f8 B _sdtb
>>>
>>> And to show this is going to be used:
>>>
>>> 42sh> git diff
>>> diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
>>> index 5d44667bd89d..2b680b8226d2 100644
>>> --- a/xen/arch/arm/arm64/head.S
>>> +++ b/xen/arch/arm/arm64/head.S
>>> @@ -297,6 +297,7 @@ real_start_efi:
>>>
>>>           /* Using the DTB in the .dtb section? */
>>>   #ifdef CONFIG_DTB_FILE
>>> +        e
>>>           load_paddr x21, _sdtb
>>>   #endif
>>>
>>> 42hs> make
>>> [...]
>>>    CC      arm64/head.o
>>> arm64/head.S: Assembler messages:
>>> arm64/head.S:300: Error: unknown mnemonic `e' -- `e'
>>> /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed
>>>
>>> So _sdtb is going to always be used...
>>>
>>> Cheers,
>>>
>>
>> Yes you are right. So I could add another config like:
>> config DTB_VALID
>> 	def_bool y if DTB_FILE != ""
>> and change all the lines containing:
>> #ifdef CONFIG_DTB_FILE
>> to
>> #ifdef CONFIG_DTB_VALID
> 
> I'm sorry to jump in again, but I still think a 2nd Kconfig setting
> is not needed. I count three uses of CONFIG_DTB_VALID outside of
> make files. The ones in .S can be replaced by using assembler
> directives .ifeqs / .ifneqs. And the one in xen.lds.S looks to be
> unnecessary altogether: If there's no input .dtb section, the
> linker wouldn't allocate an output one anyway. And the _sdtb symbol,
> if you want to avoid its creation when there's no reference, could
> be wrapped in PROVIDE(). (I also think that symbol should be
> defined inside the section definition, not ahead of it.)

I don't particularly care of the approach used so long it doesn't break 
existing setup and doesn't end up to define _sdtb.

Cheers,

-- 
Julien Grall
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Michal Orzel 4 years, 11 months ago 

On 11.03.2021 14:32, Julien Grall wrote:
> Hi,
> 
> On 11/03/2021 13:10, Jan Beulich wrote:
>> On 11.03.2021 13:39, Michal Orzel wrote:
>>> On 11.03.2021 12:11, Julien Grall wrote:
>>>> On 11/03/2021 10:41, Michal Orzel wrote:
>>>>> On 11.03.2021 11:34, Julien Grall wrote:
>>>>>> On 10/03/2021 06:58, Michal Orzel wrote:
>>>>>>> Currently in order to link existing DTB into Xen image
>>>>>>> we need to either specify option CONFIG_DTB_FILE on the
>>>>>>> command line or manually add it into .config.
>>>>>>> Add Kconfig entry: CONFIG_DTB_FILE to be able to
>>>>>>> provide the path to DTB we want to embed into Xen image.
>>>>>>> If no path provided - the dtb will not be embedded.
>>>>>>>
>>>>>>> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>>>>> as it is not needed since Kconfig will define it in a header
>>>>>>> with all the other config options.
>>>>>>>
>>>>>>> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
>>>>>>> ---
>>>>>>>     xen/arch/arm/Makefile | 5 ++---
>>>>>>>     xen/common/Kconfig    | 8 ++++++++
>>>>>>>     2 files changed, 10 insertions(+), 3 deletions(-)
>>>>>>>
>>>>>>> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
>>>>>>> index 16e6523e2c..46e6a95fec 100644
>>>>>>> --- a/xen/arch/arm/Makefile
>>>>>>> +++ b/xen/arch/arm/Makefile
>>>>>>> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
>>>>>>>       #obj-bin-y += ....o
>>>>>>>     -ifdef CONFIG_DTB_FILE
>>>>>>> +ifneq ($(CONFIG_DTB_FILE),"")
>>>>>>>     obj-y += dtb.o
>>>>>>> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
>>>>>>>     endif
>>>>>>>       ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
>>>>>>> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
>>>>>>>     xen.lds: xen.lds.S
>>>>>>>         $(CPP) -P $(a_flags) -MQ $@ -o $@ $<
>>>>>>>     -dtb.o: $(CONFIG_DTB_FILE)
>>>>>>> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
>>>>>>>       .PHONY: clean
>>>>>>>     clean::
>>>>>>> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
>>>>>>> index eb953d171e..a27836bf47 100644
>>>>>>> --- a/xen/common/Kconfig
>>>>>>> +++ b/xen/common/Kconfig
>>>>>>> @@ -400,6 +400,14 @@ config DOM0_MEM
>>>>>>>             Leave empty if you are not sure what to specify.
>>>>>>>     +config DTB_FILE
>>>>>>> +    string "Absolute path to device tree blob"
>>>>>>> +    depends on HAS_DEVICE_TREE
>>>>>>> +    ---help---
>>>>>>> +      When using a bootloader that has no device tree support or when there
>>>>>>> +      is no bootloader at all, use this option to specify the absolute path
>>>>>>> +      to a device tree that will be linked directly inside Xen binary.
>>>>>>
>>>>>> With this approach, CONFIG_DTB_FILE will always be defined. This means that Xen will always be compiled to use the "embedded" DTB. When the string is "", it will be garbagge.
>>>>>>
>>>>>> So I think we need a second config to that indicates whether the string is empty or not.
>>>>>>
>>>>>> Interestingly, your first version of patch didn't expose the problem because CONFIG_DTB_FILE would not be defined if the CONFIG_LINK_DTB is not selected. Although, it would still happily build if CONFIG_DTB_FILE is "".
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>> I do not agrree. We do not need another config.
>>>>
>>>> Did you test that Xen will still boot if the string is empty?
>>>>
>>>>> If string is empty - the dtb.o will not be created and there will be no dtb section in xen binary.
>>>>
>>>> The dtb.o will not be created but the section will because the linker use #ifdef CONFIG_DTB_FILE:
>>>>
>>>> 42sh> grep CONFIG_DTB .config
>>>> CONFIG_DTB_FILE=""
>>>> 42sh> nm xen-syms | grep _sdtb
>>>> 00000000003560f8 B _sdtb
>>>>
>>>> And to show this is going to be used:
>>>>
>>>> 42sh> git diff
>>>> diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
>>>> index 5d44667bd89d..2b680b8226d2 100644
>>>> --- a/xen/arch/arm/arm64/head.S
>>>> +++ b/xen/arch/arm/arm64/head.S
>>>> @@ -297,6 +297,7 @@ real_start_efi:
>>>>
>>>>           /* Using the DTB in the .dtb section? */
>>>>   #ifdef CONFIG_DTB_FILE
>>>> +        e
>>>>           load_paddr x21, _sdtb
>>>>   #endif
>>>>
>>>> 42hs> make
>>>> [...]
>>>>    CC      arm64/head.o
>>>> arm64/head.S: Assembler messages:
>>>> arm64/head.S:300: Error: unknown mnemonic `e' -- `e'
>>>> /home/ANT.AMAZON.COM/jgrall/works/oss/xen/xen/Rules.mk:204: recipe for target 'arm64/head.o' failed
>>>>
>>>> So _sdtb is going to always be used...
>>>>
>>>> Cheers,
>>>>
>>>
>>> Yes you are right. So I could add another config like:
>>> config DTB_VALID
>>>     def_bool y if DTB_FILE != ""
>>> and change all the lines containing:
>>> #ifdef CONFIG_DTB_FILE
>>> to
>>> #ifdef CONFIG_DTB_VALID
>>
>> I'm sorry to jump in again, but I still think a 2nd Kconfig setting
>> is not needed. I count three uses of CONFIG_DTB_VALID outside of
>> make files. The ones in .S can be replaced by using assembler
>> directives .ifeqs / .ifneqs. And the one in xen.lds.S looks to be
>> unnecessary altogether: If there's no input .dtb section, the
>> linker wouldn't allocate an output one anyway. And the _sdtb symbol,
>> if you want to avoid its creation when there's no reference, could
>> be wrapped in PROVIDE(). (I also think that symbol should be
>> defined inside the section definition, not ahead of it.)
> 
> I don't particularly care of the approach used so long it doesn't break existing setup and doesn't end up to define _sdtb.
> 
> Cheers,
> 
I will send v5.
Re: [PATCH v4] arm: Add Kconfig entry to select CONFIG_DTB_FILE
Posted by Bertrand Marquis 4 years, 11 months ago 
Hi,

> On 10 Mar 2021, at 07:58, Michal Orzel <Michal.Orzel@arm.com> wrote:
> 
> Currently in order to link existing DTB into Xen image
> we need to either specify option CONFIG_DTB_FILE on the
> command line or manually add it into .config.
> Add Kconfig entry: CONFIG_DTB_FILE to be able to
> provide the path to DTB we want to embed into Xen image.
> If no path provided - the dtb will not be embedded.
> 
> Remove the line: AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
> as it is not needed since Kconfig will define it in a header
> with all the other config options.
> 
> Signed-off-by: Michal Orzel <michal.orzel@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>

Cheers
Bertrand

> ---
> xen/arch/arm/Makefile | 5 ++---
> xen/common/Kconfig    | 8 ++++++++
> 2 files changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
> index 16e6523e2c..46e6a95fec 100644
> --- a/xen/arch/arm/Makefile
> +++ b/xen/arch/arm/Makefile
> @@ -68,9 +68,8 @@ extra-y += $(TARGET_SUBARCH)/head.o
> 
> #obj-bin-y += ....o
> 
> -ifdef CONFIG_DTB_FILE
> +ifneq ($(CONFIG_DTB_FILE),"")
> obj-y += dtb.o
> -AFLAGS-y += -DCONFIG_DTB_FILE=\"$(CONFIG_DTB_FILE)\"
> endif
> 
> ALL_OBJS := $(TARGET_SUBARCH)/head.o $(ALL_OBJS)
> @@ -137,7 +136,7 @@ asm-offsets.s: $(TARGET_SUBARCH)/asm-offsets.c
> xen.lds: xen.lds.S
> 	$(CPP) -P $(a_flags) -MQ $@ -o $@ $<
> 
> -dtb.o: $(CONFIG_DTB_FILE)
> +dtb.o: $(patsubst "%",%,$(CONFIG_DTB_FILE))
> 
> .PHONY: clean
> clean::
> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
> index eb953d171e..a27836bf47 100644
> --- a/xen/common/Kconfig
> +++ b/xen/common/Kconfig
> @@ -400,6 +400,14 @@ config DOM0_MEM
> 
> 	  Leave empty if you are not sure what to specify.
> 
> +config DTB_FILE
> +	string "Absolute path to device tree blob"
> +	depends on HAS_DEVICE_TREE
> +	---help---
> +	  When using a bootloader that has no device tree support or when there
> +	  is no bootloader at all, use this option to specify the absolute path
> +	  to a device tree that will be linked directly inside Xen binary.
> +
> config TRACEBUFFER
> 	bool "Enable tracing infrastructure" if EXPERT
> 	default y
> -- 
> 2.29.0
>

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.