After a reset of a QEMU -machine q35 guest, the PCI Express
Enhanced Configuration Mechanism is disabled and the variable
mmconfig no longer matches the configuration register PCIEXBAR
of the Q35 chipset. Until the variable mmconfig is reset to 0,
all pci_config_*() functions no longer work.
The variable mmconfig is located in one of the read-only C-F
segments. To reset it the pci_config_*() functions are needed,
but they do not work.
Replace all pci_config_*() calls with Standard PCI Configuration
Mechanism pci_ioconfig_*() calls until mmconfig is overwritten
with 0 by a fresh copy of the BIOS.
This fixes
In resume (status=0)
In 32bit resume
Attempting a hard reboot
Unable to unlock ram - bridge not found
and a reset loop with QEMU -accel tcg.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
---
src/fw/shadow.c | 14 +++++++-------
src/hw/pci.c | 27 +++++++++++++++++++++++++++
src/hw/pci.h | 6 ++++++
3 files changed, 40 insertions(+), 7 deletions(-)
diff --git a/src/fw/shadow.c b/src/fw/shadow.c
index 4c627a8..8930616 100644
--- a/src/fw/shadow.c
+++ b/src/fw/shadow.c
@@ -32,8 +32,8 @@ __make_bios_writable_intel(u16 bdf, u32 pam0)
{
// Read in current PAM settings from pci config space
union pamdata_u pamdata;
- pamdata.data32[0] = pci_config_readl(bdf, ALIGN_DOWN(pam0, 4));
- pamdata.data32[1] = pci_config_readl(bdf, ALIGN_DOWN(pam0, 4) + 4);
+ pamdata.data32[0] = pci_ioconfig_readl(bdf, ALIGN_DOWN(pam0, 4));
+ pamdata.data32[1] = pci_ioconfig_readl(bdf, ALIGN_DOWN(pam0, 4) + 4);
u8 *pam = &pamdata.data8[pam0 & 0x03];
// Make ram from 0xc0000-0xf0000 writable
@@ -46,8 +46,8 @@ __make_bios_writable_intel(u16 bdf, u32 pam0)
pam[0] = 0x30;
// Write PAM settings back to pci config space
- pci_config_writel(bdf, ALIGN_DOWN(pam0, 4), pamdata.data32[0]);
- pci_config_writel(bdf, ALIGN_DOWN(pam0, 4) + 4, pamdata.data32[1]);
+ pci_ioconfig_writel(bdf, ALIGN_DOWN(pam0, 4), pamdata.data32[0]);
+ pci_ioconfig_writel(bdf, ALIGN_DOWN(pam0, 4) + 4, pamdata.data32[1]);
if (!ram_present)
// Copy bios.
@@ -59,7 +59,7 @@ __make_bios_writable_intel(u16 bdf, u32 pam0)
static void
make_bios_writable_intel(u16 bdf, u32 pam0)
{
- int reg = pci_config_readb(bdf, pam0);
+ int reg = pci_ioconfig_readb(bdf, pam0);
if (!(reg & 0x10)) {
// QEMU doesn't fully implement the piix shadow capabilities -
// if ram isn't backing the bios segment when shadowing is
@@ -125,8 +125,8 @@ make_bios_writable(void)
// At this point, statically allocated variables can't be written,
// so do this search manually.
int bdf;
- foreachbdf(bdf, 0) {
- u32 vendev = pci_config_readl(bdf, PCI_VENDOR_ID);
+ pci_ioconfig_foreachbdf(bdf, 0) {
+ u32 vendev = pci_ioconfig_readl(bdf, PCI_VENDOR_ID);
u16 vendor = vendev & 0xffff, device = vendev >> 16;
if (vendor == PCI_VENDOR_ID_INTEL
&& device == PCI_DEVICE_ID_INTEL_82441) {
diff --git a/src/hw/pci.c b/src/hw/pci.c
index f13cbde..8eda84b 100644
--- a/src/hw/pci.c
+++ b/src/hw/pci.c
@@ -157,6 +157,33 @@ u8 pci_find_capability(u16 bdf, u8 cap_id, u8 cap)
return 0;
}
+// Helper function for pci_ioconfig_foreachbdf() macro - return next device
+int pci_ioconfig_next(int bdf, int bus)
+{
+ if (pci_bdf_to_fn(bdf) == 0
+ && (pci_ioconfig_readb(bdf, PCI_HEADER_TYPE) & 0x80) == 0)
+ // Last found device wasn't a multi-function device - skip to
+ // the next device.
+ bdf += 8;
+ else
+ bdf += 1;
+
+ for (;;) {
+ if (pci_bdf_to_bus(bdf) != bus)
+ return -1;
+
+ u16 v = pci_ioconfig_readw(bdf, PCI_VENDOR_ID);
+ if (v != 0x0000 && v != 0xffff)
+ // Device is present.
+ return bdf;
+
+ if (pci_bdf_to_fn(bdf) == 0)
+ bdf += 8;
+ else
+ bdf += 1;
+ }
+}
+
// Helper function for foreachbdf() macro - return next device
int
pci_next(int bdf, int bus)
diff --git a/src/hw/pci.h b/src/hw/pci.h
index ee6acaf..b2f5baf 100644
--- a/src/hw/pci.h
+++ b/src/hw/pci.h
@@ -27,6 +27,11 @@ static inline u16 pci_bus_devfn_to_bdf(int bus, u16 devfn) {
return (bus << 8) | devfn;
}
+#define pci_ioconfig_foreachbdf(BDF, BUS) \
+ for (BDF=pci_ioconfig_next(pci_bus_devfn_to_bdf((BUS), 0)-1, (BUS)) \
+ ; BDF >= 0 \
+ ; BDF=pci_ioconfig_next(BDF, (BUS)))
+
#define foreachbdf(BDF, BUS) \
for (BDF=pci_next(pci_bus_devfn_to_bdf((BUS), 0)-1, (BUS)) \
; BDF >= 0 \
@@ -39,6 +44,7 @@ void pci_ioconfig_writeb(u16 bdf, u32 addr, u8 val);
u32 pci_ioconfig_readl(u16 bdf, u32 addr);
u16 pci_ioconfig_readw(u16 bdf, u32 addr);
u8 pci_ioconfig_readb(u16 bdf, u32 addr);
+int pci_ioconfig_next(int bdf, int bus);
// PCI configuration access using either PCI CAM or PCIe ECAM
void pci_config_writel(u16 bdf, u32 addr, u32 val);
--
2.34.1
_______________________________________________
SeaBIOS mailing list -- seabios@seabios.org
To unsubscribe send an email to seabios-leave@seabios.org
© 2016 - 2024 Red Hat, Inc.