1. Patchew
  2. QEMU
  3. [PATCH 0/2] hw/arm: ast2600: Wire up eMMC controller
  4. View patch

[PATCH 2/2] hw/arm: ast2600: Wire up the eMMC controller

Andrew Jeffery posted 2 patches 6 years, 2 months ago
Maintainers: Joel Stanley <joel@jms.id.au>, Peter Maydell <peter.maydell@linaro.org>, "Cédric Le Goater" <clg@kaod.org>, Andrew Jeffery <andrew@aj.id.au>
There is a newer version of this series
[PATCH 2/2] hw/arm: ast2600: Wire up the eMMC controller
Posted by Andrew Jeffery 6 years, 2 months ago 
Initialise another SDHCI model instance for the AST2600's eMMC
controller and use the SDHCI's num_slots value introduced previously to
determine whether we should create an SD card instance for the new slot.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 hw/arm/aspeed.c             | 13 +++++++++++++
 hw/arm/aspeed_ast2600.c     | 21 +++++++++++++++++++++
 include/hw/arm/aspeed_soc.h |  2 ++
 3 files changed, 36 insertions(+)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 862549b1f3a9..0e08d62e9ff3 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -272,6 +272,19 @@ static void aspeed_board_init(MachineState *machine,
         object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
     }
 
+    if (bmc->soc.emmc.num_slots) {
+        SDHCIState *emmc = &bmc->soc.emmc.slots[0];
+        DriveInfo *dinfo = drive_get_next(IF_SD);
+        BlockBackend *blk;
+        DeviceState *card;
+
+        blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
+        card = qdev_create(qdev_get_child_bus(DEVICE(emmc), "sd-bus"),
+                           TYPE_SD_CARD);
+        qdev_prop_set_drive(card, "drive", blk, &error_fatal);
+        object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
+    }
+
     arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
 }
 
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 931ee5aae183..723c8196c8a5 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -46,6 +46,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
     [ASPEED_ADC]       = 0x1E6E9000,
     [ASPEED_VIDEO]     = 0x1E700000,
     [ASPEED_SDHCI]     = 0x1E740000,
+    [ASPEED_EMMC]      = 0x1E750000,
     [ASPEED_GPIO]      = 0x1E780000,
     [ASPEED_GPIO_1_8V] = 0x1E780800,
     [ASPEED_RTC]       = 0x1E781000,
@@ -64,6 +65,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
 
 #define ASPEED_SOC_AST2600_MAX_IRQ 128
 
+/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */
 static const int aspeed_soc_ast2600_irqmap[] = {
     [ASPEED_UART1]     = 47,
     [ASPEED_UART2]     = 48,
@@ -77,6 +79,7 @@ static const int aspeed_soc_ast2600_irqmap[] = {
     [ASPEED_ADC]       = 78,
     [ASPEED_XDMA]      = 6,
     [ASPEED_SDHCI]     = 43,
+    [ASPEED_EMMC]      = 15,
     [ASPEED_GPIO]      = 40,
     [ASPEED_GPIO_1_8V] = 11,
     [ASPEED_RTC]       = 13,
@@ -215,6 +218,14 @@ static void aspeed_soc_ast2600_init(Object *obj)
         sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]),
                               sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI);
     }
+
+    sysbus_init_child_obj(obj, "emmc", OBJECT(&s->emmc), sizeof(s->emmc),
+                          TYPE_ASPEED_SDHCI);
+
+    object_property_set_int(OBJECT(&s->emmc), 1, "num-slots", &error_abort);
+
+    sysbus_init_child_obj(obj, "emmc[*]", OBJECT(&s->emmc.slots[0]),
+            sizeof(s->emmc.slots[0]), TYPE_SYSBUS_SDHCI);
 }
 
 /*
@@ -487,6 +498,16 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
                     sc->memmap[ASPEED_SDHCI]);
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
                        aspeed_soc_get_irq(s, ASPEED_SDHCI));
+
+    /* eMMC */
+    object_property_set_bool(OBJECT(&s->emmc), true, "realized", &err);
+    if (err) {
+        error_propagate(errp, err);
+        return;
+    }
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_EMMC]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
+                       aspeed_soc_get_irq(s, ASPEED_EMMC));
 }
 
 static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data)
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index 495c08be1b84..911443f4c071 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -56,6 +56,7 @@ typedef struct AspeedSoCState {
     AspeedGPIOState gpio;
     AspeedGPIOState gpio_1_8v;
     AspeedSDHCIState sdhci;
+    AspeedSDHCIState emmc;
 } AspeedSoCState;
 
 #define TYPE_ASPEED_SOC "aspeed-soc"
@@ -125,6 +126,7 @@ enum {
     ASPEED_MII4,
     ASPEED_SDRAM,
     ASPEED_XDMA,
+    ASPEED_EMMC,
 };
 
 #endif /* ASPEED_SOC_H */
-- 
git-series 0.9.1
Re: [PATCH 2/2] hw/arm: ast2600: Wire up the eMMC controller
Posted by Cédric Le Goater 6 years, 2 months ago 
On 10/12/2019 01:52, Andrew Jeffery wrote:
> Initialise another SDHCI model instance for the AST2600's eMMC
> controller and use the SDHCI's num_slots value introduced previously to
> determine whether we should create an SD card instance for the new slot.
> 
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

LGTM. One comment.

> ---
>  hw/arm/aspeed.c             | 13 +++++++++++++
>  hw/arm/aspeed_ast2600.c     | 21 +++++++++++++++++++++
>  include/hw/arm/aspeed_soc.h |  2 ++
>  3 files changed, 36 insertions(+)
> 
> diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> index 862549b1f3a9..0e08d62e9ff3 100644
> --- a/hw/arm/aspeed.c
> +++ b/hw/arm/aspeed.c
> @@ -272,6 +272,19 @@ static void aspeed_board_init(MachineState *machine,
>          object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
>      }
>  
> +    if (bmc->soc.emmc.num_slots) {
> +        SDHCIState *emmc = &bmc->soc.emmc.slots[0];
> +        DriveInfo *dinfo = drive_get_next(IF_SD);
> +        BlockBackend *blk;
> +        DeviceState *card;
> +
> +        blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
> +        card = qdev_create(qdev_get_child_bus(DEVICE(emmc), "sd-bus"),
> +                           TYPE_SD_CARD);
> +        qdev_prop_set_drive(card, "drive", blk, &error_fatal);
> +        object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
> +    }

I think we could use a function for the above ^

C.

>      arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
>  }
>  
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index 931ee5aae183..723c8196c8a5 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -46,6 +46,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
>      [ASPEED_ADC]       = 0x1E6E9000,
>      [ASPEED_VIDEO]     = 0x1E700000,
>      [ASPEED_SDHCI]     = 0x1E740000,
> +    [ASPEED_EMMC]      = 0x1E750000,
>      [ASPEED_GPIO]      = 0x1E780000,
>      [ASPEED_GPIO_1_8V] = 0x1E780800,
>      [ASPEED_RTC]       = 0x1E781000,
> @@ -64,6 +65,7 @@ static const hwaddr aspeed_soc_ast2600_memmap[] = {
>  
>  #define ASPEED_SOC_AST2600_MAX_IRQ 128
>  
> +/* Shared Peripheral Interrupt values below are offset by -32 from datasheet */
>  static const int aspeed_soc_ast2600_irqmap[] = {
>      [ASPEED_UART1]     = 47,
>      [ASPEED_UART2]     = 48,
> @@ -77,6 +79,7 @@ static const int aspeed_soc_ast2600_irqmap[] = {
>      [ASPEED_ADC]       = 78,
>      [ASPEED_XDMA]      = 6,
>      [ASPEED_SDHCI]     = 43,
> +    [ASPEED_EMMC]      = 15,
>      [ASPEED_GPIO]      = 40,
>      [ASPEED_GPIO_1_8V] = 11,
>      [ASPEED_RTC]       = 13,
> @@ -215,6 +218,14 @@ static void aspeed_soc_ast2600_init(Object *obj)
>          sysbus_init_child_obj(obj, "sdhci[*]", OBJECT(&s->sdhci.slots[i]),
>                                sizeof(s->sdhci.slots[i]), TYPE_SYSBUS_SDHCI);
>      }
> +
> +    sysbus_init_child_obj(obj, "emmc", OBJECT(&s->emmc), sizeof(s->emmc),
> +                          TYPE_ASPEED_SDHCI);
> +
> +    object_property_set_int(OBJECT(&s->emmc), 1, "num-slots", &error_abort);
> +
> +    sysbus_init_child_obj(obj, "emmc[*]", OBJECT(&s->emmc.slots[0]),
> +            sizeof(s->emmc.slots[0]), TYPE_SYSBUS_SDHCI);
>  }
>  
>  /*
> @@ -487,6 +498,16 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
>                      sc->memmap[ASPEED_SDHCI]);
>      sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
>                         aspeed_soc_get_irq(s, ASPEED_SDHCI));
> +
> +    /* eMMC */
> +    object_property_set_bool(OBJECT(&s->emmc), true, "realized", &err);
> +    if (err) {
> +        error_propagate(errp, err);
> +        return;
> +    }
> +    sysbus_mmio_map(SYS_BUS_DEVICE(&s->emmc), 0, sc->memmap[ASPEED_EMMC]);
> +    sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
> +                       aspeed_soc_get_irq(s, ASPEED_EMMC));
>  }
>  
>  static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data)
> diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
> index 495c08be1b84..911443f4c071 100644
> --- a/include/hw/arm/aspeed_soc.h
> +++ b/include/hw/arm/aspeed_soc.h
> @@ -56,6 +56,7 @@ typedef struct AspeedSoCState {
>      AspeedGPIOState gpio;
>      AspeedGPIOState gpio_1_8v;
>      AspeedSDHCIState sdhci;
> +    AspeedSDHCIState emmc;
>  } AspeedSoCState;
>  
>  #define TYPE_ASPEED_SOC "aspeed-soc"
> @@ -125,6 +126,7 @@ enum {
>      ASPEED_MII4,
>      ASPEED_SDRAM,
>      ASPEED_XDMA,
> +    ASPEED_EMMC,
>  };
>  
>  #endif /* ASPEED_SOC_H */
>
Re: [PATCH 2/2] hw/arm: ast2600: Wire up the eMMC controller
Posted by Andrew Jeffery 6 years, 2 months ago 

On Tue, 10 Dec 2019, at 23:22, Cédric Le Goater wrote:
> On 10/12/2019 01:52, Andrew Jeffery wrote:
> > Initialise another SDHCI model instance for the AST2600's eMMC
> > controller and use the SDHCI's num_slots value introduced previously to
> > determine whether we should create an SD card instance for the new slot.
> > 
> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> 
> LGTM. One comment.
> 
> > ---
> >  hw/arm/aspeed.c             | 13 +++++++++++++
> >  hw/arm/aspeed_ast2600.c     | 21 +++++++++++++++++++++
> >  include/hw/arm/aspeed_soc.h |  2 ++
> >  3 files changed, 36 insertions(+)
> > 
> > diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> > index 862549b1f3a9..0e08d62e9ff3 100644
> > --- a/hw/arm/aspeed.c
> > +++ b/hw/arm/aspeed.c
> > @@ -272,6 +272,19 @@ static void aspeed_board_init(MachineState *machine,
> >          object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
> >      }
> >  
> > +    if (bmc->soc.emmc.num_slots) {
> > +        SDHCIState *emmc = &bmc->soc.emmc.slots[0];
> > +        DriveInfo *dinfo = drive_get_next(IF_SD);
> > +        BlockBackend *blk;
> > +        DeviceState *card;
> > +
> > +        blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
> > +        card = qdev_create(qdev_get_child_bus(DEVICE(emmc), "sd-bus"),
> > +                           TYPE_SD_CARD);
> > +        qdev_prop_set_drive(card, "drive", blk, &error_fatal);
> > +        object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
> > +    }
> 
> I think we could use a function for the above ^

Yep, I'll refactor that.

Andrew

Patchew 2.1-devel-b67e4c2

© 2016 - 2026 Red Hat, Inc.