The current logic is based on a lot of duct tape, with
offsets calculated based on one define with the number of
source IDs and an enum.
Rewrite the logic in a way that it would be more resilient
of code changes, by moving the source ID count to an enum
and make the offset calculus more explicit.
Such change was inspired on a patch from Jonathan Cameron
splitting the logic to get the CPER address on a separate
function, as this will be needed to support generic error
injection.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Changes from v9:
- patch split on multiple patches to avoid multiple changes
at the same patch.
Changes from v8:
- Non-rename/cleanup changes merged altogether;
- source ID is now more generic, defined per guest target.
That should make easier to add support for 86.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
hw/acpi/ghes.c | 95 ++++++++++++++++++++++++++++++------------
include/hw/acpi/ghes.h | 6 ++-
2 files changed, 73 insertions(+), 28 deletions(-)
diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
index 36fe5f68782f..6e5f0e8cf0c9 100644
--- a/hw/acpi/ghes.c
+++ b/hw/acpi/ghes.c
@@ -61,6 +61,23 @@
*/
#define ACPI_GHES_GESB_SIZE 20
+/*
+ * Offsets with regards to the start of the HEST table stored at
+ * ags->hest_addr_le, according with the memory layout map at
+ * docs/specs/acpi_hest_ghes.rst.
+ */
+
+/* ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2
+ * Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure
+ */
+#define HEST_GHES_V2_TABLE_SIZE 92
+#define GHES_ACK_OFFSET (64 + GAS_ADDR_OFFSET)
+
+/* ACPI 6.2: 18.3.2.7: Generic Hardware Error Source
+ * Table 18-380: 'Error Status Address' field
+ */
+#define GHES_ERR_ST_ADDR_OFFSET (20 + GAS_ADDR_OFFSET)
+
/*
* Values for error_severity field
*/
@@ -401,11 +418,13 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
{
- uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
- uint64_t start_addr;
- bool ret = -1;
+ uint64_t hest_read_ack_start_addr, read_ack_start_addr;
+ uint64_t hest_addr, cper_addr, err_source_struct;
+ uint64_t hest_err_block_addr, error_block_addr;
+ uint32_t i, ret;
AcpiGedState *acpi_ged_state;
AcpiGhesState *ags;
+ uint64_t read_ack;
assert(source_id < ACPI_GHES_ERROR_SOURCE_COUNT);
@@ -414,44 +433,66 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
g_assert(acpi_ged_state);
ags = &acpi_ged_state->ghes_state;
- start_addr = le64_to_cpu(ags->ghes_addr_le);
+ hest_addr = le64_to_cpu(ags->hest_addr_le);
if (!physical_address) {
return -1;
}
- start_addr += source_id * sizeof(uint64_t);
+ err_source_struct = hest_addr + ACPI_GHES_ERROR_SOURCE_COUNT;
- cpu_physical_memory_read(start_addr, &error_block_addr,
- sizeof(error_block_addr));
+ /*
+ * Currently, HEST Error source navigates only for GHESv2 tables
+ */
+ for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
+ uint64_t addr = err_source_struct;
+ uint16_t type, src_id;
- error_block_addr = le64_to_cpu(error_block_addr);
+ cpu_physical_memory_read(addr, &type, sizeof(type));
- read_ack_register_addr = start_addr +
- ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
+ /* For now, we only know the size of GHESv2 table */
+ assert(type == ACPI_GHES_SOURCE_GENERIC_ERROR_V2);
- cpu_physical_memory_read(read_ack_register_addr,
- &read_ack_register, sizeof(read_ack_register));
+ /* It is GHES. Compare CPER source address */
+ addr += sizeof(type);
+ cpu_physical_memory_read(addr, &src_id, sizeof(src_id));
- /* zero means OSPM does not acknowledge the error */
- if (!read_ack_register) {
- error_report("OSPM does not acknowledge previous error,"
- " so can not record CPER for current error anymore");
- } else if (error_block_addr) {
- read_ack_register = cpu_to_le64(0);
- /*
- * Clear the Read Ack Register, OSPM will write it to 1 when
- * it acknowledges this error.
- */
- cpu_physical_memory_write(read_ack_register_addr,
- &read_ack_register, sizeof(uint64_t));
+ if (src_id == source_id) {
+ break;
+ }
- ret = acpi_ghes_record_mem_error(error_block_addr,
- physical_address);
- } else {
+ err_source_struct += HEST_GHES_V2_TABLE_SIZE;
+ }
+ if (i == ACPI_GHES_ERROR_SOURCE_COUNT) {
error_report("can not find Generic Error Status Block");
+
+ return -1;
}
+ /* Navigate though table address pointers */
+
+ hest_err_block_addr = err_source_struct + GHES_ERR_ST_ADDR_OFFSET;
+ hest_read_ack_start_addr = err_source_struct + GHES_ACK_OFFSET;
+
+ cpu_physical_memory_read(hest_err_block_addr, &error_block_addr,
+ sizeof(error_block_addr));
+
+ cpu_physical_memory_read(error_block_addr, &cper_addr,
+ sizeof(error_block_addr));
+
+ cpu_physical_memory_read(hest_read_ack_start_addr, &read_ack_start_addr,
+ sizeof(read_ack_start_addr));
+
+ /* Update ACK offset to notify about a new error */
+
+ cpu_physical_memory_read(read_ack_start_addr,
+ &read_ack, sizeof(read_ack));
+
+ read_ack = cpu_to_le64(0);
+ cpu_physical_memory_write(read_ack_start_addr,
+ &read_ack, sizeof(read_ack));
+
+ ret = acpi_ghes_record_mem_error(error_block_addr, physical_address);
return ret;
}
diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
index c9bbda4740e2..7485f54c28f2 100644
--- a/include/hw/acpi/ghes.h
+++ b/include/hw/acpi/ghes.h
@@ -23,6 +23,7 @@
#define ACPI_GHES_H
#include "hw/acpi/bios-linker-loader.h"
+#include "qapi/error.h"
/*
* Values for Hardware Error Notification Type field
@@ -74,7 +75,10 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
const char *oem_id, const char *oem_table_id);
void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
GArray *hardware_errors);
-int acpi_ghes_record_errors(uint8_t source_id, uint64_t error_physical_addr);
+int acpi_ghes_record_errors(uint8_t source_id,
+ uint64_t error_physical_addr);
+void ghes_record_cper_errors(const void *cper, size_t len,
+ uint16_t source_id, Error **errp);
/**
* acpi_ghes_present: Report whether ACPI GHES table is present
--
2.46.0On Sat, 14 Sep 2024 08:13:28 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
> The current logic is based on a lot of duct tape, with
> offsets calculated based on one define with the number of
> source IDs and an enum.
>
> Rewrite the logic in a way that it would be more resilient
> of code changes, by moving the source ID count to an enum
> and make the offset calculus more explicit.
>
> Such change was inspired on a patch from Jonathan Cameron
> splitting the logic to get the CPER address on a separate
> function, as this will be needed to support generic error
> injection.
so this patch switches to using HEST to lookup error status block
by source id, though nothing in commit message mentions that.
Perhaps it's time to rewrite commit message to be more
specific/clear on what it's doing.
now, I'd split this on several patches that should also take care of
wiring needed to preserve old lookup to keep migration with 9.1 machines
working:
1. extract error status block read_ack addresses calculation/lookup
into a separate function (just current code, without HEST lookup).
2. since old lookup code handles only 1 source and won't ever see multiple
error sources, simplify that as much as possible to keep old way simple
(and mention that in commit message).
it basically should take 1st error status block/read ack addresses from
hardware_errors
3. add to AcpiGedState a callback to with signature of #1 lookup func.
(which will be used to switch between old/new code), by default set to
old lookup func
4. add to GED a bool property x-has-hardware_errors_addr = 1
and use it in acpi_ged_realize() to set callback
if x-has-hardware_errors_addr == 1
callback = old_lookup
5. add new HEST lookup func (not used yet with mentioning that follow up patch
will use it)
6. cleanup fwcfg based on x-has-hardware_errors_addr,
i.e. for 'true':
ask for write pointer to hardware_errors like it's done in current code
and don't register hest_addr write pointer
while for 'false'
do opposite of above.
7. flip x-has-hardware_errors_addr default to 0 and add to hw/core/machine.c
hw_compat_9_1[] = {
{ged type, 'x-has-hardware_errors_addr', 'true'},
}
this will make 9.1 and older machine types to use old lookup callback
while newer machines will use default new lookup
that should take care of switching between new and old ABI,
i.e. which code qemu and guest will use/see.
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>
> ---
>
> Changes from v9:
> - patch split on multiple patches to avoid multiple changes
> at the same patch.
>
> Changes from v8:
> - Non-rename/cleanup changes merged altogether;
> - source ID is now more generic, defined per guest target.
> That should make easier to add support for 86.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> hw/acpi/ghes.c | 95 ++++++++++++++++++++++++++++++------------
> include/hw/acpi/ghes.h | 6 ++-
> 2 files changed, 73 insertions(+), 28 deletions(-)
>
> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> index 36fe5f68782f..6e5f0e8cf0c9 100644
> --- a/hw/acpi/ghes.c
> +++ b/hw/acpi/ghes.c
> @@ -61,6 +61,23 @@
> */
> #define ACPI_GHES_GESB_SIZE 20
>
> +/*
> + * Offsets with regards to the start of the HEST table stored at
> + * ags->hest_addr_le, according with the memory layout map at
> + * docs/specs/acpi_hest_ghes.rst.
> + */
> +
> +/* ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2
> + * Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure
> + */
> +#define HEST_GHES_V2_TABLE_SIZE 92
> +#define GHES_ACK_OFFSET (64 + GAS_ADDR_OFFSET)
> +
> +/* ACPI 6.2: 18.3.2.7: Generic Hardware Error Source
> + * Table 18-380: 'Error Status Address' field
> + */
> +#define GHES_ERR_ST_ADDR_OFFSET (20 + GAS_ADDR_OFFSET)
> +
> /*
> * Values for error_severity field
> */
> @@ -401,11 +418,13 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
>
> int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
> {
> - uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
> - uint64_t start_addr;
> - bool ret = -1;
> + uint64_t hest_read_ack_start_addr, read_ack_start_addr;
> + uint64_t hest_addr, cper_addr, err_source_struct;
> + uint64_t hest_err_block_addr, error_block_addr;
> + uint32_t i, ret;
> AcpiGedState *acpi_ged_state;
> AcpiGhesState *ags;
> + uint64_t read_ack;
>
> assert(source_id < ACPI_GHES_ERROR_SOURCE_COUNT);
>
> @@ -414,44 +433,66 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
> g_assert(acpi_ged_state);
> ags = &acpi_ged_state->ghes_state;
>
> - start_addr = le64_to_cpu(ags->ghes_addr_le);
> + hest_addr = le64_to_cpu(ags->hest_addr_le);
>
> if (!physical_address) {
> return -1;
> }
>
> - start_addr += source_id * sizeof(uint64_t);
> + err_source_struct = hest_addr + ACPI_GHES_ERROR_SOURCE_COUNT;
>
> - cpu_physical_memory_read(start_addr, &error_block_addr,
> - sizeof(error_block_addr));
> + /*
> + * Currently, HEST Error source navigates only for GHESv2 tables
> + */
> + for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
> + uint64_t addr = err_source_struct;
> + uint16_t type, src_id;
>
> - error_block_addr = le64_to_cpu(error_block_addr);
> + cpu_physical_memory_read(addr, &type, sizeof(type));
>
> - read_ack_register_addr = start_addr +
> - ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
> + /* For now, we only know the size of GHESv2 table */
> + assert(type == ACPI_GHES_SOURCE_GENERIC_ERROR_V2);
>
> - cpu_physical_memory_read(read_ack_register_addr,
> - &read_ack_register, sizeof(read_ack_register));
> + /* It is GHES. Compare CPER source address */
> + addr += sizeof(type);
> + cpu_physical_memory_read(addr, &src_id, sizeof(src_id));
>
> - /* zero means OSPM does not acknowledge the error */
> - if (!read_ack_register) {
> - error_report("OSPM does not acknowledge previous error,"
> - " so can not record CPER for current error anymore");
> - } else if (error_block_addr) {
> - read_ack_register = cpu_to_le64(0);
> - /*
> - * Clear the Read Ack Register, OSPM will write it to 1 when
> - * it acknowledges this error.
> - */
> - cpu_physical_memory_write(read_ack_register_addr,
> - &read_ack_register, sizeof(uint64_t));
> + if (src_id == source_id) {
> + break;
> + }
>
> - ret = acpi_ghes_record_mem_error(error_block_addr,
> - physical_address);
> - } else {
> + err_source_struct += HEST_GHES_V2_TABLE_SIZE;
> + }
> + if (i == ACPI_GHES_ERROR_SOURCE_COUNT) {
> error_report("can not find Generic Error Status Block");
> +
> + return -1;
> }
>
> + /* Navigate though table address pointers */
> +
> + hest_err_block_addr = err_source_struct + GHES_ERR_ST_ADDR_OFFSET;
> + hest_read_ack_start_addr = err_source_struct + GHES_ACK_OFFSET;
> +
> + cpu_physical_memory_read(hest_err_block_addr, &error_block_addr,
> + sizeof(error_block_addr));
> +
> + cpu_physical_memory_read(error_block_addr, &cper_addr,
> + sizeof(error_block_addr));
> +
> + cpu_physical_memory_read(hest_read_ack_start_addr, &read_ack_start_addr,
> + sizeof(read_ack_start_addr));
> +
> + /* Update ACK offset to notify about a new error */
> +
> + cpu_physical_memory_read(read_ack_start_addr,
> + &read_ack, sizeof(read_ack));
> +
> + read_ack = cpu_to_le64(0);
> + cpu_physical_memory_write(read_ack_start_addr,
> + &read_ack, sizeof(read_ack));
> +
> + ret = acpi_ghes_record_mem_error(error_block_addr, physical_address);
> return ret;
> }
>
> diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
> index c9bbda4740e2..7485f54c28f2 100644
> --- a/include/hw/acpi/ghes.h
> +++ b/include/hw/acpi/ghes.h
> @@ -23,6 +23,7 @@
> #define ACPI_GHES_H
>
> #include "hw/acpi/bios-linker-loader.h"
> +#include "qapi/error.h"
>
> /*
> * Values for Hardware Error Notification Type field
> @@ -74,7 +75,10 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
> const char *oem_id, const char *oem_table_id);
> void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
> GArray *hardware_errors);
> -int acpi_ghes_record_errors(uint8_t source_id, uint64_t error_physical_addr);
> +int acpi_ghes_record_errors(uint8_t source_id,
> + uint64_t error_physical_addr);
> +void ghes_record_cper_errors(const void *cper, size_t len,
> + uint16_t source_id, Error **errp);
>
> /**
> * acpi_ghes_present: Report whether ACPI GHES table is present
Em Tue, 17 Sep 2024 13:59:34 +0200
Igor Mammedov <imammedo@redhat.com> escreveu:
> On Sat, 14 Sep 2024 08:13:28 +0200
> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:
>
> > The current logic is based on a lot of duct tape, with
> > offsets calculated based on one define with the number of
> > source IDs and an enum.
> >
> > Rewrite the logic in a way that it would be more resilient
> > of code changes, by moving the source ID count to an enum
> > and make the offset calculus more explicit.
> >
> > Such change was inspired on a patch from Jonathan Cameron
> > splitting the logic to get the CPER address on a separate
> > function, as this will be needed to support generic error
> > injection.
>
> so this patch switches to using HEST to lookup error status block
> by source id, though nothing in commit message mentions that.
> Perhaps it's time to rewrite commit message to be more
> specific/clear on what it's doing.
>
> now, I'd split this on several patches that should also take care of
> wiring needed to preserve old lookup to keep migration with 9.1 machines
> working:
>
> 1. extract error status block read_ack addresses calculation/lookup
> into a separate function (just current code, without HEST lookup).
Done. This is at the cleanup series.
> 2. since old lookup code handles only 1 source and won't ever see multiple
> error sources, simplify that as much as possible to keep old way simple
> (and mention that in commit message).
> it basically should take 1st error status block/read ack addresses from
> hardware_errors
Done there too.
>
> 3. add to AcpiGedState a callback to with signature of #1 lookup func.
> (which will be used to switch between old/new code), by default set to
> old lookup func
>
> 4. add to GED a bool property x-has-hardware_errors_addr = 1
> and use it in acpi_ged_realize() to set callback
>
> if x-has-hardware_errors_addr == 1
> callback = old_lookup
Instead of a callback, I opted to define a boolean:
DEFINE_PROP_BOOL("x-has-hest-addr", AcpiGedState, ghes_state.hest_lookup, true),
That avoided the need of exporting the math logic and deal with
callbacks. It also avoided the need of touching acpi_ged_realize().
>
> 5. add new HEST lookup func (not used yet with mentioning that follow up patch
> will use it)
>
> 6. cleanup fwcfg based on x-has-hardware_errors_addr,
> i.e. for 'true':
> ask for write pointer to hardware_errors like it's done in current code
> and don't register hest_addr write pointer
> while for 'false'
> do opposite of above.
This doesn't work. without the fw_cfg logic for both, QEMU/BIOS won't boot
and/or the hardware_errors won't work, causing ghes to do nothing.
> 7. flip x-has-hardware_errors_addr default to 0 and add to hw/core/machine.c
> hw_compat_9_1[] = {
> {ged type, 'x-has-hardware_errors_addr', 'true'},
> }
> this will make 9.1 and older machine types to use old lookup callback
> while newer machines will use default new lookup
I opted to add the changes on machine.c at the same patch.
See the RFC series I posted.
> that should take care of switching between new and old ABI,
> i.e. which code qemu and guest will use/see.
With the new series, both virt-9.1 and virt-9.2 are doing the
right thing using either the legacy or the new math. I double
checked with a small debug patch, and changing the virt-9.1
code to use GPIO, as it is a way easier to inject errors than
via SEA (SEA requires the host OS to generate a bus error on
a hw address used by the VM).
>
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> >
> > ---
> >
> > Changes from v9:
> > - patch split on multiple patches to avoid multiple changes
> > at the same patch.
> >
> > Changes from v8:
> > - Non-rename/cleanup changes merged altogether;
> > - source ID is now more generic, defined per guest target.
> > That should make easier to add support for 86.
> >
> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> > ---
> > hw/acpi/ghes.c | 95 ++++++++++++++++++++++++++++++------------
> > include/hw/acpi/ghes.h | 6 ++-
> > 2 files changed, 73 insertions(+), 28 deletions(-)
> >
> > diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> > index 36fe5f68782f..6e5f0e8cf0c9 100644
> > --- a/hw/acpi/ghes.c
> > +++ b/hw/acpi/ghes.c
> > @@ -61,6 +61,23 @@
> > */
> > #define ACPI_GHES_GESB_SIZE 20
> >
> > +/*
> > + * Offsets with regards to the start of the HEST table stored at
> > + * ags->hest_addr_le, according with the memory layout map at
> > + * docs/specs/acpi_hest_ghes.rst.
> > + */
> > +
> > +/* ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2
> > + * Table 18-382 Generic Hardware Error Source version 2 (GHESv2) Structure
> > + */
> > +#define HEST_GHES_V2_TABLE_SIZE 92
> > +#define GHES_ACK_OFFSET (64 + GAS_ADDR_OFFSET)
> > +
> > +/* ACPI 6.2: 18.3.2.7: Generic Hardware Error Source
> > + * Table 18-380: 'Error Status Address' field
> > + */
> > +#define GHES_ERR_ST_ADDR_OFFSET (20 + GAS_ADDR_OFFSET)
> > +
> > /*
> > * Values for error_severity field
> > */
> > @@ -401,11 +418,13 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
> >
> > int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
> > {
> > - uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
> > - uint64_t start_addr;
> > - bool ret = -1;
> > + uint64_t hest_read_ack_start_addr, read_ack_start_addr;
> > + uint64_t hest_addr, cper_addr, err_source_struct;
> > + uint64_t hest_err_block_addr, error_block_addr;
> > + uint32_t i, ret;
> > AcpiGedState *acpi_ged_state;
> > AcpiGhesState *ags;
> > + uint64_t read_ack;
> >
> > assert(source_id < ACPI_GHES_ERROR_SOURCE_COUNT);
> >
> > @@ -414,44 +433,66 @@ int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
> > g_assert(acpi_ged_state);
> > ags = &acpi_ged_state->ghes_state;
> >
> > - start_addr = le64_to_cpu(ags->ghes_addr_le);
> > + hest_addr = le64_to_cpu(ags->hest_addr_le);
> >
> > if (!physical_address) {
> > return -1;
> > }
> >
> > - start_addr += source_id * sizeof(uint64_t);
> > + err_source_struct = hest_addr + ACPI_GHES_ERROR_SOURCE_COUNT;
> >
> > - cpu_physical_memory_read(start_addr, &error_block_addr,
> > - sizeof(error_block_addr));
> > + /*
> > + * Currently, HEST Error source navigates only for GHESv2 tables
> > + */
> > + for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) {
> > + uint64_t addr = err_source_struct;
> > + uint16_t type, src_id;
> >
> > - error_block_addr = le64_to_cpu(error_block_addr);
> > + cpu_physical_memory_read(addr, &type, sizeof(type));
> >
> > - read_ack_register_addr = start_addr +
> > - ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
> > + /* For now, we only know the size of GHESv2 table */
> > + assert(type == ACPI_GHES_SOURCE_GENERIC_ERROR_V2);
> >
> > - cpu_physical_memory_read(read_ack_register_addr,
> > - &read_ack_register, sizeof(read_ack_register));
> > + /* It is GHES. Compare CPER source address */
> > + addr += sizeof(type);
> > + cpu_physical_memory_read(addr, &src_id, sizeof(src_id));
> >
> > - /* zero means OSPM does not acknowledge the error */
> > - if (!read_ack_register) {
> > - error_report("OSPM does not acknowledge previous error,"
> > - " so can not record CPER for current error anymore");
> > - } else if (error_block_addr) {
> > - read_ack_register = cpu_to_le64(0);
> > - /*
> > - * Clear the Read Ack Register, OSPM will write it to 1 when
> > - * it acknowledges this error.
> > - */
> > - cpu_physical_memory_write(read_ack_register_addr,
> > - &read_ack_register, sizeof(uint64_t));
> > + if (src_id == source_id) {
> > + break;
> > + }
> >
> > - ret = acpi_ghes_record_mem_error(error_block_addr,
> > - physical_address);
> > - } else {
> > + err_source_struct += HEST_GHES_V2_TABLE_SIZE;
> > + }
> > + if (i == ACPI_GHES_ERROR_SOURCE_COUNT) {
> > error_report("can not find Generic Error Status Block");
> > +
> > + return -1;
> > }
> >
> > + /* Navigate though table address pointers */
> > +
> > + hest_err_block_addr = err_source_struct + GHES_ERR_ST_ADDR_OFFSET;
> > + hest_read_ack_start_addr = err_source_struct + GHES_ACK_OFFSET;
> > +
> > + cpu_physical_memory_read(hest_err_block_addr, &error_block_addr,
> > + sizeof(error_block_addr));
> > +
> > + cpu_physical_memory_read(error_block_addr, &cper_addr,
> > + sizeof(error_block_addr));
> > +
> > + cpu_physical_memory_read(hest_read_ack_start_addr, &read_ack_start_addr,
> > + sizeof(read_ack_start_addr));
> > +
> > + /* Update ACK offset to notify about a new error */
> > +
> > + cpu_physical_memory_read(read_ack_start_addr,
> > + &read_ack, sizeof(read_ack));
> > +
> > + read_ack = cpu_to_le64(0);
> > + cpu_physical_memory_write(read_ack_start_addr,
> > + &read_ack, sizeof(read_ack));
> > +
> > + ret = acpi_ghes_record_mem_error(error_block_addr, physical_address);
> > return ret;
> > }
> >
> > diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
> > index c9bbda4740e2..7485f54c28f2 100644
> > --- a/include/hw/acpi/ghes.h
> > +++ b/include/hw/acpi/ghes.h
> > @@ -23,6 +23,7 @@
> > #define ACPI_GHES_H
> >
> > #include "hw/acpi/bios-linker-loader.h"
> > +#include "qapi/error.h"
> >
> > /*
> > * Values for Hardware Error Notification Type field
> > @@ -74,7 +75,10 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_errors,
> > const char *oem_id, const char *oem_table_id);
> > void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
> > GArray *hardware_errors);
> > -int acpi_ghes_record_errors(uint8_t source_id, uint64_t error_physical_addr);
> > +int acpi_ghes_record_errors(uint8_t source_id,
> > + uint64_t error_physical_addr);
> > +void ghes_record_cper_errors(const void *cper, size_t len,
> > + uint16_t source_id, Error **errp);
> >
> > /**
> > * acpi_ghes_present: Report whether ACPI GHES table is present
>
Thanks,
Mauro
On Tue, 1 Oct 2024 13:57:59 +0200 Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote: > Em Tue, 17 Sep 2024 13:59:34 +0200 > Igor Mammedov <imammedo@redhat.com> escreveu: > > > On Sat, 14 Sep 2024 08:13:28 +0200 > > Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote: > > > > > The current logic is based on a lot of duct tape, with > > > offsets calculated based on one define with the number of > > > source IDs and an enum. > > > > > > Rewrite the logic in a way that it would be more resilient > > > of code changes, by moving the source ID count to an enum > > > and make the offset calculus more explicit. > > > > > > Such change was inspired on a patch from Jonathan Cameron > > > splitting the logic to get the CPER address on a separate > > > function, as this will be needed to support generic error > > > injection. > > > > so this patch switches to using HEST to lookup error status block > > by source id, though nothing in commit message mentions that. > > Perhaps it's time to rewrite commit message to be more > > specific/clear on what it's doing. > > > > now, I'd split this on several patches that should also take care of > > wiring needed to preserve old lookup to keep migration with 9.1 machines > > working: [...] > > 6. cleanup fwcfg based on x-has-hardware_errors_addr, > > i.e. for 'true': > > ask for write pointer to hardware_errors like it's done in current code > > and don't register hest_addr write pointer > > while for 'false' > > do opposite of above. > > This doesn't work. without the fw_cfg logic for both, QEMU/BIOS won't boot > and/or the hardware_errors won't work, causing ghes to do nothing. we should look more into it, only 1 of them hest_addr(9.2+) or hwerror_addr(9.1) is necessary so if it breaks, it looks like a bug somewhere to me. > [...] > > > Thanks, > Mauro >
© 2016 - 2024 Red Hat, Inc.