This patchset refine the comment of ther previous series:
https://patchew.org/QEMU/cover.1712577715.git.yong.huang@smartx.com/
Aiming to make the review easier, please review, thanks.
Yong
When designing the USB mass storage device model, QEMU places SCSI disk
device as the backend of USB mass storage device. In addition, USB mass
device driver in Guest OS conforms to the "Universal Serial Bus Mass
Storage Class Bulk-Only Transport" specification in order to simulate
the transform behavior between a USB controller and a USB mass device.
The following shows the protocol hierarchy:
+----------------+
CDROM driver | scsi command | CDROM
+----------------+
+-----------------------+
USB mass | USB Mass Storage Class| USB mass
storage driver | Bulk-Only Transport | storage device
+-----------------------+
+----------------+
USB Controller | USB Protocol | USB device
+----------------+
In the USB protocol layer, between the USB controller and USB device, at
least two USB packets will be transformed when guest OS send a
read operation to USB mass storage device:
1. The CBW packet, which will be delivered to the USB device's Bulk-Out
endpoint. In order to simulate a read operation, the USB mass storage
device parses the CBW and converts it to a SCSI command, which would be
executed by CDROM(represented as SCSI disk in QEMU internally), and store
the result data of the SCSI command in a buffer.
2. The DATA-IN packet, which will be delivered from the USB device's
Bulk-In endpoint(fetched directly from the preceding buffer) to the USB
controller.
We consider UHCI to be the controller. The two packets mentioned above may
have been processed by UHCI in two separate frame entries of the Frame List
, and also described by two different TDs. Unlike the physical environment,
a virtualized environment requires the QEMU to make sure that the result
data of CBW is not lost and is delivered to the UHCI controller.
Currently, these types of SCSI requests are not migrated, so QEMU cannot
ensure the result data of the IO operation is not lost if there are
inflight emulated SCSI requests during the live migration.
Assume for the moment that the USB mass storage device is processing the
CBW and storing the result data of the read operation to a buffre, live
migration happens and moves the VM to the destination while not migrating
the result data of the read operation.
After migration, when UHCI at the destination issues a DATA-IN request to
the USB mass storage device, a crash happens because USB mass storage device
fetches the result data and get nothing.
The scenario this patch addresses is this one.
Theoretically, any device that uses the SCSI disk as a back-end would be
affected by this issue. In this case, it is the USB CDROM.
To fix it, inflight emulated SCSI request be migrated during live migration,
similar to the DMA SCSI request.
Hyman Huang (2):
scsi-disk: Introduce the migrate_emulate_scsi_request field
scsi-disk: Fix crash for VM configured with USB CDROM after live
migration
hw/scsi/scsi-disk.c | 35 ++++++++++++++++++++++++++++++++++-
1 file changed, 34 insertions(+), 1 deletion(-)
--
2.39.3