On Tue, Jan 16, 2018 at 3:22 PM, Alistair Francis
<alistair.francis@xilinx.com> wrote:
>
> This series adds the ZynqMP Power Management Unit (PMU) machine with basic
> functionality.
>
> The machine only has the
> - CPU
> - Memory
> - Interrupt controller
> - IPI device
>
> connected, but that is enough to run some of the ROM and firmware
> code on the machine
>
> The series also adds the IPI device and connects it to the ZynqMP ARM
> side and the ZynqMP PMU. These IPI devices don't connect between the ARM
> and MicroBlaze instances though.
>
> V5:
> - Fix clang makecheck error
> - Rebase on master
> V4:
> - Rename the ZCU102 machine to just ZynqMP
> - Rename the PMC SoC to "xlnx,zynqmp-pmu-soc"
> - Move the IPI device to the machine instead of the SoC
> V3:
> - Add the interrupt controller
> - Replace some of the error_fatals with errp
> - Fix the PMU CPU name
>
>
>
> Alistair Francis (9):
> microblaze: boot.c: Don't try to find NULL pointer
> xlnx-zynqmp-pmu: Initial commit of the ZynqMP PMU
> xlnx-zynqmp-pmu: Add the CPU and memory
> aarch64-softmmu.mak: Use an ARM specific config
> xlnx-pmu-iomod-intc: Add the PMU Interrupt controller
> xlnx-zynqmp-pmu: Connect the PMU interrupt controller
> xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device
> xlnx-zynqmp-pmu: Connect the IPI device to the PMU
> xlnx-zynqmp: Connect the IPI device to the ZynqMP SoC
>
> default-configs/aarch64-softmmu.mak | 1 +
> default-configs/microblaze-softmmu.mak | 1 +
> hw/arm/Makefile.objs | 2 +-
> hw/arm/xlnx-zynqmp.c | 14 +
> hw/display/Makefile.objs | 2 +-
> hw/dma/Makefile.objs | 1 +
> hw/intc/Makefile.objs | 2 +
> hw/intc/xlnx-pmu-iomod-intc.c | 554 +++++++++++++++++++++++++++++++++
> hw/intc/xlnx-zynqmp-ipi.c | 377 ++++++++++++++++++++++
> hw/microblaze/Makefile.objs | 1 +
> hw/microblaze/boot.c | 2 +-
> hw/microblaze/xlnx-zynqmp-pmu.c | 204 ++++++++++++
> include/hw/arm/xlnx-zynqmp.h | 2 +
> include/hw/intc/xlnx-pmu-iomod-intc.h | 58 ++++
> include/hw/intc/xlnx-zynqmp-ipi.h | 57 ++++
> 15 files changed, 1275 insertions(+), 3 deletions(-)
> create mode 100644 hw/intc/xlnx-pmu-iomod-intc.c
> create mode 100644 hw/intc/xlnx-zynqmp-ipi.c
> create mode 100644 hw/microblaze/xlnx-zynqmp-pmu.c
> create mode 100644 include/hw/intc/xlnx-pmu-iomod-intc.h
> create mode 100644 include/hw/intc/xlnx-zynqmp-ipi.h
>
> --
> 2.14.1
>
> This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
ARGH! Apparently Xilinx started this crap up again. I didn't realise
this is on all my emails. I'll work on getting it removed.
Alistair