The mcimx6ul-evk machine can boot Linux directly, but it cannot run the
U-Boot proper produced by Buildroot far enough to load a kernel from its
SD card. Early U-Boot boot test accesses currently abort or observe
placeholder values, and the i.MX uSDHC model exposes several issues.
This series lets an unmodified Buildroot 2026.05 U-Boot 2024.07 image
run on mcimx6ul-evk, load zImage and imx6ul-14x14-evk.dtb from USDHC2,
start Linux, mount the SD card root file system, and reach the Buildroot
login prompt. It also documents and tests the existing direct Linux boot
path.
Patches 1 through 4 provide the minimum early-firmware-visible state.
Patches 5 through 8 address i.MX uSDHC behavior needed by U-Boot. The
last two patches document both boot paths and add functional tests for
U-Boot and direct Linux boot.
This series is based on the v5 PolarFire SoC Icicle Kit series
<20261104154207.641511-1-bin.meng@processmission.com>,
as the SDHCI changes overlap.
Changes in v5:
- Rebase on the v5 PolarFire SoC Icicle Kit series
- Address the uSDHC const and opaque-pointer review comments
- Consolidate uSDHC write dispatch while preserving partial accesses
- Fix boot example formatting and use the default RAM size
Changes in v4:
- Rebase on the v4 PolarFire SoC Icicle Kit series
- Simplify the reserved page to a MemoryRegion
- Log invalid reserved accesses and explain the RAZ/WI behaviour
- Reference the U-Boot fix for the reserved-register access
- Make the functional test executable
Changes in v3:
- hw/cpu: a15mpcore: Model the reserved page as RAZ/WI
- Rebase on the v3 PolarFire SoC Icicle Kit series
- Model the full reserved page as a child of a15mpcore_priv
- Validate MMDC RAM geometry and document supported capacities
- Translate uSDHC vendor clock gates in its MMIO handlers
- Cover partial reset accesses and migrate vendor clock state
- Extend contiguous SDMA completion to both eSDHC byte orders
Changes in v2:
- rebase on top of the microchip polarfire soc series
Bin Meng (10):
hw/cpu: a15mpcore: Model the reserved page as RAZ/WI
hw/misc: imx6ul_ccm: Update PMU_MISC0 reset value
hw/arm: fsl-imx6ul: Map early firmware register placeholders
hw/arm: fsl-imx6ul: Add a minimal MMDC geometry model
hw/sd: sdhci: Use a QEMU-local no-busy IRQ quirk bit
hw/sd: sdhci: Honor i.MX uSDHC vendor clock gates
hw/sd: sdhci: Preserve uSDHC status enables for U-Boot
hw/sd: sdhci: Skip SDMA boundary stops for eSDHC and uSDHC
docs/system/arm: Document MCIMX6UL-EVK Buildroot boot
tests/functional/arm: Add MCIMX6UL-EVK boot tests
MAINTAINERS | 1 +
docs/system/arm/mcimx6ul-evk.rst | 72 ++++++++++
include/hw/arm/fsl-imx6ul.h | 2 +
include/hw/cpu/a15mpcore.h | 1 +
include/hw/sd/sdhci.h | 10 +-
hw/arm/fsl-imx6ul.c | 87 +++++++++++-
hw/arm/mcimx6ul-evk.c | 2 +
hw/cpu/a15mpcore.c | 32 +++++
hw/misc/imx6ul_ccm.c | 2 +-
hw/sd/sdhci.c | 154 +++++++++++++++++-----
tests/functional/arm/meson.build | 2 +
tests/functional/arm/test_mcimx6ul_evk.py | 69 ++++++++++
12 files changed, 394 insertions(+), 40 deletions(-)
create mode 100755 tests/functional/arm/test_mcimx6ul_evk.py
---
base-commit: 055648c36dd2ce8bf7a339f852ba01f063e23b4e
branch: imx6ul-evk
--
2.53.0