On POWER systems, newer processor generations can operate in compatibility
modes corresponding to earlier generations (e.g., a Power11 system running
in Power10 compatibility mode). In such cases, the effective CPU level
exposed to guests differs from the physical processor generation.

This creates issues for nested virtualization. When booting a nested KVM
guest, QEMU may derive the CPU model from the raw hardware PVR and attempt
to configure the guest accordingly. However, the host is constrained by the
compatibility level negotiated with the hypervisor, and requests exceeding
that level are rejected by KVM, leading to guest boot failures such as:

  KVM-NESTEDv2: couldn't set guest wide elements

This series addresses the issue by preventing fallback to raw mode when the
host itself is booted in a compatibility mode, and by querying the effective
CPU compatibility modes supported by the host via KVM. The kernel interface
uses copy_struct_from/to_user() for forward and backward ABI compatibility.
With these changes, QEMU ensures that nested guests are configured with CPU
models consistent with the host compatibility mode, allowing them to boot
correctly.

Patch summary:
  [1/3] [DO_NOT_MERGE] linux-headers: Add uapi header changes
  [2/3] target/ppc/kvm: Add support for querying host compatibility mode
  [3/3] target/ppc/kvm: Use host compatibility mode for nested guests

Changes in v6:
  - Patch 3: Drop redundant #ifndef CONFIG_KVM / #error guard; kvm.c is
    only compiled when CONFIG_KVM is set (enforced by meson.build), so
    the check can never fire [BALATON]

Testing (with kernel v9 patches):

KVM APIv1 Testing
=================
  On P10 PowerNV machine (L0)
  ---------------------------
    - P10 L1 KVM guest -> works
      - P10 nested L2 KVM guest -> works
      - P9 compat nested L2 KVM guest -> works
    - P9 compat L1 KVM guest -> works
      - P9 nested L2 KVM guest -> works

  On Powernv11 TCG Guest (L0)
  ---------------------------
    - P11 PowerNV TCG L0 guest -> works
    - P11 L1 KVM guest -> works
      - P11 L2 KVM guest -> works
    - P10 compat L1 KVM guest -> works
      - P10 L2 KVM guest -> works
    - P9  compat L1 KVM guest -> works
      - P9 L2 KVM guest -> works

KVM APIv2 Testing
=================
  On P11 PowerVM LPAR (L1)
  ------------------------
    - P11 L2 KVM guest -> works
    - P10 compat L2 KVM guest -> works
    - P9 compat L2 KVM guest fails to boot as expected
    - Without QEMU patches but Linux patches
      - P11 L2 KVM guest -> works
      - P10 compat L2 KVM guest -> works
      - P9 compat L2 KVM guest fails to boot as expected
    - Without Linux patches but QEMU patches
      - P11 L2 KVM guest -> works
      - P10 compat L2 KVM guest -> works

  On P11 LPAR in P10 compat (L1)
  ------------------------------
    - P10 (host compat) L2 KVM guest -> works
    - Without QEMU patch but Linux patches
      - P10 guest fails to boot as expected (error: kvm run failed Invalid argument)
    - Without Linux patch but QEMU patches
      - P10 guest fails to boot as expected (KVM: unknown exit, hardware reason ffffffffffffffea)

  On P10 PowerVM LPAR (L1)
  ------------------------
    - P10 L2 KVM guest -> works
    - P9 compat L2 KVM guest fails to boot as expected

TCG pSeries Guest
=================
    - P11 (default) pSeries guest boots fine

ABI Extensibility Testing (struct size 32, extra member)
=========================================================
    - Newer struct on QEMU, older kernel -> works (kernel returns -E2BIG,
      QEMU retries with correct size)
    - New struct on Linux kernel, older QEMU -> works (kernel zero-pads
      trailing fields, QEMU gets correct data)

Note:
1. Patch 1 is marked DO_NOT_MERGE as it contains linux-headers updates that
   will be synced separately via scripts/update-linux-headers.sh once the
   kernel changes are merged upstream.
2. The corresponding Linux kernel patches (v9) have been accepted into the
   ppc/next branch and will be included in the next pull request.

v5: https://lore.kernel.org/all/20260804182914.83091-1-amachhiw@linux.ibm.com/
v4: https://lore.kernel.org/all/20260701052341.62289-1-amachhiw@linux.ibm.com/
v3: https://lore.kernel.org/all/20260616113915.25589-1-amachhiw@linux.ibm.com/
v2: https://lore.kernel.org/all/20260502140021.69712-1-amachhiw@linux.ibm.com/
v1: https://lore.kernel.org/all/20260430061333.37905-1-amachhiw@linux.ibm.com/

Previous kernel patch versions:
v9: https://lore.kernel.org/all/20260808161148.66673-1-amachhiw@linux.ibm.com/
v8: https://lore.kernel.org/all/20260807172433.82045-1-amachhiw@linux.ibm.com/
v7: https://lore.kernel.org/all/20260806170645.11892-1-amachhiw@linux.ibm.com/
v6: https://lore.kernel.org/all/20260804180705.59160-1-amachhiw@linux.ibm.com/
v5: https://lore.kernel.org/all/20260701051409.51820-1-amachhiw@linux.ibm.com/
v4: https://lore.kernel.org/all/20260616123314.82721-1-amachhiw@linux.ibm.com/
v3: https://lore.kernel.org/all/20260522152744.55251-1-amachhiw@linux.ibm.com/
v2: https://lore.kernel.org/all/20260513100755.83195-1-amachhiw@linux.ibm.com/
v1: https://lore.kernel.org/all/20260430054906.94401-1-amachhiw@linux.ibm.com/

Amit Machhiwal (3):
  [DO_NOT_MERGE] linux-headers: Add uapi header changes
  target/ppc/kvm: Add support for querying host compatibility mode
  target/ppc/kvm: Use host compatibility mode for nested guests

 hw/ppc/spapr_hcall.c            | 14 ++++++
 linux-headers/asm-powerpc/kvm.h | 19 ++++++++
 linux-headers/linux/kvm.h       |  3 ++
 target/ppc/kvm.c                | 84 +++++++++++++++++++++++++++++++++
 target/ppc/kvm_ppc.h            |  7 +++
 5 files changed, 127 insertions(+)


base-commit: e8d693e12af9cbb89d724baadfcc08559669e279
-- 
2.50.1 (Apple Git-155)