The following changes since commit 84f07211cc5b4fc6a371559bf8a5de4fb068e648:
Update version for v11.1.0 release (2026-08-11 10:04:46 -0400)
are available in the Git repository at:
https://github.com/legoater/qemu/ tags/pull-aspeed-20260811
for you to fetch changes up to 0375f6498eee6188089924bb766c653492ff8857:
tests/qtest/aspeed-hace: Test the crypto command on the AST2700 (2026-08-11 18:25:58 +0200)
----------------------------------------------------------------
aspeed queue:
* Fixes missing Kconfig dependencies for Aspeed boards
* Adds 64-bit addressing support to the EHCI USB controller model.
Enable it on the AST2700
* Extends Aspeed SMC qtest coverage with fast-read, DOR and QOR
read modes
* Introduces a separate Aspeed2700SCUState type and shares the SCUIO,
FMC and SCU instances across the AST2700 PSP, SSP and TSP
coprocessors
* Adds Data FIFO-based flash access for the AST2700 FMC controller
* Adds the ADC128D818 12-bit 8-channel ADC sensor device with tests,
wired up on the Anacapa board
* Reworks the PCA9552/PCA9555 GPIO/LED driver: polarity inversion,
datasheet-conformant command handling, GPIO QOM properties, reset
via the Resettable interface, and extensive qtest coverage
* Reworks the PCA9554 GPIO driver: output-to-input reflection,
PCA9536 support, pin direction property, and qtest coverage
* Adds PCA9555 IO expanders and temperature sensors to the Catalina
board
* Adds AST2700 I2C master buffer mode support
* Updates ASPEED functional tests to SDK v11.03 and Zephyr SDK v03.08
* Adds AES-GCM support to the QEMU crypto cipher layer (gcrypt,
nettle, gnutls backends) with unit tests
* Adds crypto (AES) command emulation to the Aspeed HACE model:
direct access, scatter-gather, CTR, GCM modes, 64-bit DMA, with
qtest coverage on AST2500, AST2600, AST1030 and AST2700
----------------------------------------------------------------
Carlo Marcelo Arenas Belón (1):
hw/arm/aspeed: avoid sign mismatch on sscanf for uart property
Cédric Le Goater (4):
tests/qtest: aspeed_smc: Introduce read_page_mem_fn for page read helpers
tests/qtest: aspeed_smc: Add fast-read test coverage
tests/qtest: aspeed_smc: Add Dual Output Read (DOR) test coverage
tests/qtest: aspeed_smc: Add Quad Output Read (QOR) test coverage
Emmanuel Blot (32):
hw/sensor: adc128d818: add 12-bit 8-channel ADC device
tests/qtest: adc128d818: add test harness and register access
tests/qtest: adc128d818: test voltage and temperature conversion
tests/qtest: adc128d818: test limit interrupts
tests/qtest: adc128d818: test operating modes and power control
hw/arm/aspeed: anacapa: use ASCII in comments
hw/arm: anacapa: add ADC128D818 devices
hw/gpio: pca9552: register types with DEFINE_TYPES()
hw/gpio: pca9552: move PCA955xState definition out of the header
hw/gpio: pca9552: rename I2CSlave member to parent_obj
hw/gpio: pca9552: default description to the instantiated type name
hw/gpio: pca9552: declare pca9555 device as an alias of pca9535 device
hw/gpio: pca9552: use the Resettable interface instead of legacy reset
hw/gpio: pca9552: apply input polarity inversion on read
hw/gpio: pca9552: conform GPIO command handling to the datasheet
hw/gpio: pca9552: expose GPIO pins as pin%d QOM properties
tests/qtest: add PCA9555 register access tests
tests/qtest: pca9555: test output-to-input reflection and pull-ups
tests/qtest: pca9555: test polarity inversion
tests/qtest: pca9555: test auto-increment and command wrapping
tests/qtest: pca9552: test behaviour specific to the LED variant
hw/gpio: pca9554: add PCA9536 support
hw/gpio: pca9554: add hw-dir property honoring the configured pin direction
hw/gpio: pca9554: reflect push-pull outputs in the input register
hw/gpio: pca9554: expose pin%d as a string property
tests/qtest: add PCA9554 register access tests
tests/qtest: pca9554: test output-to-input reflection and pull-ups
tests/qtest: pca9554: test polarity inversion
tests/qtest: pca9554: test absence of command auto-increment
tests/qtest: pca9554: test the PCA9536 4-bit variant
hw/arm: catalina: model PCA9555 IO expanders with their own type
hw/arm: catalina: add NIC and FIO temperature sensors
Jamin Lin (43):
hw/usb/hcd-ehci: Change descriptor addresses to 64-bit with migration compatibility
hw/usb/hcd-ehci: Add property to advertise 64-bit addressing capability
hw/usb/hcd-ehci: Implement 64-bit QH descriptor addressing
hw/usb/hcd-ehci: Implement 64-bit qTD descriptor addressing
hw/usb/hcd-ehci: Implement 64-bit iTD descriptor addressing
hw/usb/hcd-ehci: Implement 64-bit siTD descriptor addressing
hw/usb/hcd-ehci: Add ctrldssegment-default property
hw/arm/aspeed_ast27x0: Set EHCI ctrldssegment-default
hw/arm/aspeed_ast27x0: Enable 64-bit EHCI DMA addressing
tests/functional/aarch64/test_aspeed_ast2700: Add USB EHCI test for AST2700 A1/A2
hw/misc/aspeed_scu: Introduce Aspeed2700SCUState
hw/arm/aspeed: Use Aspeed2700SCUState for AST2700 users
hw/arm/aspeed_ast27x0: Move SCU link into AST27x0 coprocessors
hw/misc/aspeed_scu: Add separate reset handler for AST2700 SCUIO
hw/arm/aspeed_ast27x0: Pass realized PSP SoC to SSP/TSP initialization
hw/arm/ast27x0: Share single SCUIO instance across PSP, SSP, and TSP
hw/arm/ast27x0: Share FMC controller with SSP and TSP
hw/ssi/aspeed_smc: Add Data FIFO-based flash access support for AST2700
tests/qtest/ast2700-smc-test: Add Data FIFO mode test
hw/i2c/aspeed_i2c: Support the AST2700 master buffer mode
tests/functional/aarch64/test_aspeed_ast2700a2: Update ASPEED SDK v11.03
tests/functional/aarch64/test_aspeed_ast2700a1: Update ASPEED SDK v11.03
tests/functional/aarch64/test_aspeed_ast2700fc: Update ASPEED SDK v11.03
tests/functional/arm/test_aspeed_ast2600_sdk: Update ASPEED SDK v11.03
tests/functional/arm/test_aspeed_ast2500_sdk: Update ASPEED SDK v11.03
tests/functional/arm/test_aspeed_ast1030: Update ASPEED Zephyr SDK v03.08
tests/functional/arm/test_aspeed_ast1060: Update ASPEED ZEPHYR PROJECT v03.07
hw/misc/aspeed_hace: Support the crypto command in direct access mode
tests/qtest/aspeed-hace: Test the crypto command on the AST2500
hw/misc/aspeed_hace: Support scatter-gather mode for the crypto command
hw/misc/aspeed_hace: Support the CTR mode for the crypto command
tests/qtest/aspeed-hace: Test the crypto command on the AST2600
tests/qtest/aspeed-hace: Test the crypto command on the AST1030
crypto/cipher: Add GCM to QCryptoCipherMode
crypto/cipher: Add setaad/gettag for AEAD modes
crypto/cipher-gcrypt: Implement AES-GCM
crypto/cipher-nettle: Implement AES-GCM
crypto/cipher-gnutls: Implement AES-GCM
tests/unit/test-crypto-cipher: Test AES-GCM mode
hw/misc/aspeed_hace: Support 64-bit DMA for the crypto command
hw/misc/aspeed_hace: Support the AES-GCM mode for the crypto command
hw/misc/aspeed_hace: Enable the crypto command on the AST2700
tests/qtest/aspeed-hace: Test the crypto command on the AST2700
Philippe Mathieu-Daudé (3):
hw/arm/aspeed: Add missing PCI_EXPRESS -> PCIE_PORT Kconfig dependency
hw/arm/aspeed: Add missing Kconfig dependencies on required components
hw/arm/aspeed: Add missing Kconfig dependencies on optional components
qapi/crypto.json | 4 +-
crypto/cipherpriv.h | 8 +
hw/usb/hcd-ehci.h | 42 +-
include/crypto/cipher.h | 36 +
include/hw/arm/aspeed_ast1700.h | 2 +-
include/hw/arm/aspeed_coprocessor.h | 16 +-
include/hw/arm/aspeed_soc.h | 1 +
include/hw/gpio/pca9552.h | 31 +-
include/hw/gpio/pca9554.h | 3 +
include/hw/i2c/aspeed_i2c.h | 2 +
include/hw/misc/aspeed_hace.h | 1 -
include/hw/misc/aspeed_scu.h | 5 +
include/hw/sensor/adc128d818.h | 14 +
include/hw/ssi/aspeed_smc.h | 3 +-
tests/qtest/aspeed-hace-utils.h | 20 +
tests/qtest/aspeed-smc-utils.h | 35 +-
crypto/cipher.c | 32 +
hw/arm/aspeed.c | 2 +-
hw/arm/aspeed_ast2600_anacapa.c | 27 +-
hw/arm/aspeed_ast2600_catalina.c | 54 +-
hw/arm/aspeed_ast27x0-fc.c | 38 +-
hw/arm/aspeed_ast27x0-ssp.c | 56 +-
hw/arm/aspeed_ast27x0-tsp.c | 56 +-
hw/arm/aspeed_ast27x0.c | 21 +-
hw/arm/aspeed_coprocessor_common.c | 2 -
hw/core/machine.c | 2 +
hw/gpio/pca9552.c | 256 ++++--
hw/gpio/pca9554.c | 175 +++--
hw/i2c/aspeed_i2c.c | 79 ++
hw/misc/aspeed_hace.c | 461 ++++++++++-
hw/misc/aspeed_scu.c | 20 +-
hw/sensor/adc128d818.c | 696 +++++++++++++++++
hw/ssi/aspeed_smc.c | 117 ++-
hw/usb/hcd-ehci.c | 214 ++++--
tests/qtest/adc128d818-test.c | 856 +++++++++++++++++++++
tests/qtest/aspeed-hace-utils.c | 693 +++++++++++++++++
tests/qtest/aspeed-smc-utils.c | 294 ++++++-
tests/qtest/aspeed_hace-test.c | 18 +
tests/qtest/aspeed_smc-test.c | 71 +-
tests/qtest/ast2700-hace-test.c | 9 +
tests/qtest/ast2700-smc-test.c | 16 +
tests/qtest/pca9552-test.c | 76 ++
tests/qtest/pca9554-test.c | 223 ++++++
tests/qtest/pca9555-test.c | 251 ++++++
tests/unit/test-crypto-cipher.c | 240 ++++++
crypto/cipher-gcrypt.c.inc | 101 +++
crypto/cipher-gnutls.c.inc | 154 ++++
crypto/cipher-nettle.c.inc | 128 +++
hw/arm/Kconfig | 7 +-
hw/pci-host/Kconfig | 1 +
hw/sensor/Kconfig | 4 +
hw/sensor/meson.build | 1 +
hw/sensor/trace-events | 8 +
hw/usb/trace-events | 26 +-
tests/functional/aarch64/test_aspeed_ast2700a1.py | 34 +-
tests/functional/aarch64/test_aspeed_ast2700a2.py | 34 +-
tests/functional/aarch64/test_aspeed_ast2700fc.py | 21 +-
tests/functional/arm/test_aspeed_ast1030.py | 12 +-
tests/functional/arm/test_aspeed_ast1060.py | 14 +-
tests/functional/arm/test_aspeed_ast2500_sdk.py | 8 +-
.../functional/arm/test_aspeed_ast2500_sdk_515.py | 8 +-
tests/functional/arm/test_aspeed_ast2600_sdk.py | 8 +-
.../functional/arm/test_aspeed_ast2600_sdk_515.py | 8 +-
.../functional/arm/test_aspeed_ast2600_sdk_otp.py | 8 +-
tests/qtest/meson.build | 9 +-
65 files changed, 5404 insertions(+), 468 deletions(-)
create mode 100644 include/hw/sensor/adc128d818.h
create mode 100644 hw/sensor/adc128d818.c
create mode 100644 tests/qtest/adc128d818-test.c
create mode 100644 tests/qtest/pca9554-test.c
create mode 100644 tests/qtest/pca9555-test.c