Add basic plumbing for memory expander devices that support Back
Invalidation. This introduces a 'hdm-db=on|off' parameter and
exposes the relevant BI RT/Decoder component cachemem registers.
Some noteworthy properties:
- Devices require enabling Flit mode across the CXL topology.
- Explicit BI-ID commit is required.
- HDM decoder support both host and dev coherency models.
Tested-by: Dongjoo Seo <dongjoo.seo1@samsung.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
---
docs/system/devices/cxl.rst | 23 +++++
hw/cxl/cxl-component-utils.c | 142 ++++++++++++++++++++++++++--
hw/mem/cxl_type3.c | 9 +-
hw/pci-bridge/cxl_downstream.c | 2 +-
hw/pci-bridge/cxl_root_port.c | 3 +-
hw/pci-bridge/cxl_upstream.c | 2 +-
hw/pci-bridge/pci_expander_bridge.c | 2 +-
include/hw/cxl/cxl_component.h | 54 ++++++++++-
include/hw/cxl/cxl_device.h | 3 +
9 files changed, 225 insertions(+), 15 deletions(-)
diff --git a/docs/system/devices/cxl.rst b/docs/system/devices/cxl.rst
index bf7908429af8..32b1b5d7733b 100644
--- a/docs/system/devices/cxl.rst
+++ b/docs/system/devices/cxl.rst
@@ -384,6 +384,29 @@ An example of 4 devices below a switch suitable for 1, 2 or 4 way interleave::
-device cxl-type3,bus=swport3,persistent-memdev=cxl-mem3,lsa=cxl-lsa3,id=cxl-pmem3,sn=0x4 \
-M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
+An example of 4 type3 devices with volatile memory below a switch. Two of the devices
+use HDM-DB for coherence, which requires operating in Flit mode::
+
+ qemu-system-x86_64 -M q35,cxl=on -m 4G,maxmem=8G,slots=8 -smp 4 \
+ ...
+ -object memory-backend-ram,id=cxl-mem0,share=on,size=256M \
+ -object memory-backend-ram,id=cxl-mem1,share=on,size=256M \
+ -object memory-backend-ram,id=cxl-mem2,share=on,size=256M \
+ -object memory-backend-ram,id=cxl-mem3,share=on,size=256M \
+ -device pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1 \
+ -device cxl-rp,port=0,bus=cxl.1,id=root_port0,chassis=0,slot=0 \
+ -device cxl-rp,port=1,bus=cxl.1,id=root_port1,chassis=0,slot=1 \
+ -device cxl-upstream,bus=root_port0,id=us0,x-256b-flit=on \
+ -device cxl-downstream,port=0,bus=us0,id=swport0,chassis=0,slot=4 \
+ -device cxl-type3,bus=swport0,volatile-memdev=cxl-mem0,id=cxl-mem0,sn=0x1,x-256b-flit=on,hdm-db=on \
+ -device cxl-downstream,port=1,bus=us0,id=swport1,chassis=0,slot=5 \
+ -device cxl-type3,bus=swport1,volatile-memdev=cxl-mem1,id=cxl-mem1,sn=0x2,x-256b-flit=on,hdm-db=on \
+ -device cxl-downstream,port=2,bus=us0,id=swport2,chassis=0,slot=6 \
+ -device cxl-type3,bus=swport2,volatile-memdev=cxl-mem2,id=cxl-mem2,sn=0x3 \
+ -device cxl-downstream,port=3,bus=us0,id=swport3,chassis=0,slot=7 \
+ -device cxl-type3,bus=swport3,volatile-memdev=cxl-mem3,id=cxl-mem3,sn=0x4 \
+ -M cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=4G,cxl-fmw.0.interleave-granularity=4k
+
A simple arm/virt example featuring a single direct connected CXL Type 3
Volatile Memory device::
diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
index a43d227336ca..0221479613e8 100644
--- a/hw/cxl/cxl-component-utils.c
+++ b/hw/cxl/cxl-component-utils.c
@@ -71,10 +71,40 @@ static uint64_t cxl_cache_mem_read_reg(void *opaque, hwaddr offset,
case 4:
if (cregs->special_ops && cregs->special_ops->read) {
return cregs->special_ops->read(cxl_cstate, offset, 4);
- } else {
- QEMU_BUILD_BUG_ON(sizeof(*cregs->cache_mem_registers) != 4);
- return cregs->cache_mem_registers[offset / 4];
}
+
+ QEMU_BUILD_BUG_ON(sizeof(*cregs->cache_mem_registers) != 4);
+
+ if (offset == A_CXL_BI_RT_STATUS ||
+ offset == A_CXL_BI_DECODER_STATUS) {
+ int type;
+ uint64_t started;
+
+ type = (offset == A_CXL_BI_RT_STATUS) ?
+ CXL_BISTATE_RT : CXL_BISTATE_DECODER;
+ started = cxl_cstate->bi_state[type].last_commit;
+
+ if (started) {
+ uint32_t *cache_mem = cregs->cache_mem_registers;
+ uint32_t val = cache_mem[offset / 4];
+ uint64_t now;
+ int set;
+
+ now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
+ /* arbitrary 100 ms to do the commit */
+ set = !!(now >= started + 100);
+
+ if (offset == A_CXL_BI_RT_STATUS) {
+ val = FIELD_DP32(val, CXL_BI_RT_STATUS, COMMITTED, set);
+ } else {
+ val = FIELD_DP32(val, CXL_BI_DECODER_STATUS, COMMITTED,
+ set);
+ }
+ stl_le_p((uint8_t *)cache_mem + offset, val);
+ }
+ }
+
+ return cregs->cache_mem_registers[offset / 4];
case 8:
qemu_log_mask(LOG_UNIMP,
"CXL 8 byte cache mem registers not implemented\n");
@@ -123,6 +153,47 @@ static void dumb_hdm_handler(CXLComponentState *cxl_cstate, hwaddr offset,
}
}
+static void bi_handler(CXLComponentState *cxl_cstate, hwaddr offset,
+ uint32_t value)
+{
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ uint32_t sts, *cache_mem = cregs->cache_mem_registers;
+ bool to_commit = false;
+ int type;
+
+ switch (offset) {
+ case A_CXL_BI_RT_CTRL:
+ to_commit = FIELD_EX32(value, CXL_BI_RT_CTRL, COMMIT);
+ if (to_commit) {
+ sts = cxl_cache_mem_read_reg(cxl_cstate,
+ R_CXL_BI_RT_STATUS, 4);
+ sts = FIELD_DP32(sts, CXL_BI_RT_STATUS, COMMITTED, 0);
+ stl_le_p((uint8_t *)cache_mem + R_CXL_BI_RT_STATUS, sts);
+ type = CXL_BISTATE_RT;
+ }
+ break;
+ case A_CXL_BI_DECODER_CTRL:
+ to_commit = FIELD_EX32(value, CXL_BI_DECODER_CTRL, COMMIT);
+ if (to_commit) {
+ sts = cxl_cache_mem_read_reg(cxl_cstate,
+ R_CXL_BI_DECODER_STATUS, 4);
+ sts = FIELD_DP32(sts, CXL_BI_DECODER_STATUS, COMMITTED, 0);
+ stl_le_p((uint8_t *)cache_mem + R_CXL_BI_DECODER_STATUS, sts);
+ type = CXL_BISTATE_DECODER;
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (to_commit) {
+ cxl_cstate->bi_state[type].last_commit =
+ qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
+ }
+
+ stl_le_p((uint8_t *)cache_mem + offset, value);
+}
+
static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
@@ -146,6 +217,9 @@ static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
if (offset >= A_CXL_HDM_DECODER_CAPABILITY &&
offset <= A_CXL_HDM_DECODER3_TARGET_LIST_HI) {
dumb_hdm_handler(cxl_cstate, offset, value);
+ } else if (offset == A_CXL_BI_RT_CTRL ||
+ offset == A_CXL_BI_DECODER_CTRL) {
+ bi_handler(cxl_cstate, offset, value);
} else {
cregs->cache_mem_registers[offset / 4] = value;
}
@@ -235,7 +309,7 @@ static void ras_init_common(uint32_t *reg_state, uint32_t *write_msk)
}
static void hdm_init_common(uint32_t *reg_state, uint32_t *write_msk,
- enum reg_type type)
+ enum reg_type type, bool bi)
{
int decoder_count = CXL_HDM_DECODER_COUNT;
int hdm_inc = R_CXL_HDM_DECODER1_BASE_LO - R_CXL_HDM_DECODER0_BASE_LO;
@@ -260,7 +334,9 @@ static void hdm_init_common(uint32_t *reg_state, uint32_t *write_msk,
UIO_DECODER_COUNT, 0);
ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, MEMDATA_NXM_CAP, 0);
ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY,
- SUPPORTED_COHERENCY_MODEL, 0); /* Unknown */
+ SUPPORTED_COHERENCY_MODEL,
+ /* host+dev or Unknown */
+ type == CXL2_TYPE3_DEVICE && bi ? 3 : 0);
ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_GLOBAL_CONTROL,
HDM_DECODER_ENABLE, 0);
write_msk[R_CXL_HDM_DECODER_GLOBAL_CONTROL] = 0x3;
@@ -283,9 +359,43 @@ static void hdm_init_common(uint32_t *reg_state, uint32_t *write_msk,
}
}
+static void bi_rt_init_common(uint32_t *reg_state, uint32_t *write_msk)
+{
+ /* switch usp must commit the new BI-ID, timeout of 2secs */
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_RT_CAPABILITY, EXPLICIT_COMMIT, 1);
+
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_RT_CTRL, COMMIT, 0);
+ write_msk[R_CXL_BI_RT_CTRL] = 0x1;
+
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_RT_STATUS, COMMITTED, 0);
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_RT_STATUS, ERR_NOT_COMMITTED, 0);
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_RT_STATUS, COMMIT_TMO_SCALE, 0x6);
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_RT_STATUS, COMMIT_TMO_BASE, 0x2);
+}
+
+static void bi_decoder_init_common(uint32_t *reg_state, uint32_t *write_msk,
+ enum reg_type type)
+{
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_CAPABILITY, HDM_D, 0);
+ /* switch dsp must commit the new BI-ID, timeout of 2secs */
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_CAPABILITY, EXPLICIT_COMMIT,
+ (type != CXL2_ROOT_PORT && type != CXL2_TYPE3_DEVICE));
+
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_CTRL, BI_FW, 0);
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_CTRL, BI_ENABLE, 0);
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_CTRL, COMMIT, 0);
+ write_msk[R_CXL_BI_DECODER_CTRL] = 0x7;
+
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_STATUS, COMMITTED, 0);
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_STATUS, ERR_NOT_COMMITTED, 0);
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_STATUS, COMMIT_TMO_SCALE, 0x6);
+ ARRAY_FIELD_DP32(reg_state, CXL_BI_DECODER_STATUS, COMMIT_TMO_BASE, 0x2);
+}
+
void cxl_component_register_init_common(uint32_t *reg_state,
uint32_t *write_msk,
- enum reg_type type)
+ enum reg_type type,
+ bool bi)
{
int caps = 0;
@@ -325,7 +435,7 @@ void cxl_component_register_init_common(uint32_t *reg_state,
case CXL2_LOGICAL_DEVICE:
/* + HDM */
init_cap_reg(HDM, 5, 1);
- hdm_init_common(reg_state, write_msk, type);
+ hdm_init_common(reg_state, write_msk, type, bi);
/* fallthrough */
case CXL2_DOWNSTREAM_PORT:
case CXL2_DEVICE:
@@ -340,6 +450,24 @@ void cxl_component_register_init_common(uint32_t *reg_state,
abort();
}
+ /* back invalidate */
+ if (bi) {
+ switch (type) {
+ case CXL2_UPSTREAM_PORT:
+ init_cap_reg(BI_RT, 11, CXL_BI_RT_CAP_VERSION);
+ bi_rt_init_common(reg_state, write_msk);
+ break;
+ case CXL2_ROOT_PORT:
+ case CXL2_DOWNSTREAM_PORT:
+ case CXL2_TYPE3_DEVICE:
+ init_cap_reg(BI_DECODER, 12, CXL_BI_DECODER_CAP_VERSION);
+ bi_decoder_init_common(reg_state, write_msk, type);
+ break;
+ default:
+ break;
+ }
+ }
+
ARRAY_FIELD_DP32(reg_state, CXL_CAPABILITY_HEADER, ARRAY_SIZE, caps);
#undef init_cap_reg
}
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 182beb34aa29..813f00ed7e18 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -968,6 +968,11 @@ static bool cxl_setup_memory(CXLType3Dev *ct3d, Error **errp)
return false;
}
+ if (!ct3d->flitmode && ct3d->hdmdb) {
+ error_setg(errp, "hdm-db requires operating in 256b flit");
+ return false;
+ }
+
if (ct3d->hostvmem) {
MemoryRegion *vmr;
char *v_name;
@@ -1503,7 +1508,8 @@ void ct3d_reset(DeviceState *dev)
pcie_cap_fill_link_ep_usp(PCI_DEVICE(dev), ct3d->width, ct3d->speed,
ct3d->flitmode);
- cxl_component_register_init_common(reg_state, write_msk, CXL2_TYPE3_DEVICE);
+ cxl_component_register_init_common(reg_state, write_msk,
+ CXL2_TYPE3_DEVICE, ct3d->hdmdb);
cxl_device_register_init_t3(ct3d, CXL_T3_MSIX_MBOX);
/*
@@ -1543,6 +1549,7 @@ static const Property ct3_props[] = {
width, PCIE_LINK_WIDTH_16),
DEFINE_PROP_BOOL("x-256b-flit", CXLType3Dev, flitmode, false),
DEFINE_PROP_UINT16("chmu-port", CXLType3Dev, cxl_dstate.chmu[0].port, 0),
+ DEFINE_PROP_BOOL("hdm-db", CXLType3Dev, hdmdb, false),
};
static uint64_t get_lsa_size(CXLType3Dev *ct3d)
diff --git a/hw/pci-bridge/cxl_downstream.c b/hw/pci-bridge/cxl_downstream.c
index 34d51e4bd19f..65737b8529a8 100644
--- a/hw/pci-bridge/cxl_downstream.c
+++ b/hw/pci-bridge/cxl_downstream.c
@@ -42,7 +42,7 @@ static void latch_registers(CXLDownstreamPort *dsp)
uint32_t *write_msk = dsp->cxl_cstate.crb.cache_mem_regs_write_mask;
cxl_component_register_init_common(reg_state, write_msk,
- CXL2_DOWNSTREAM_PORT);
+ CXL2_DOWNSTREAM_PORT, true);
}
/* TODO: Look at sharing this code across all CXL port types */
diff --git a/hw/pci-bridge/cxl_root_port.c b/hw/pci-bridge/cxl_root_port.c
index 3f7eefa46585..2523967a9e59 100644
--- a/hw/pci-bridge/cxl_root_port.c
+++ b/hw/pci-bridge/cxl_root_port.c
@@ -106,7 +106,8 @@ static void latch_registers(CXLRootPort *crp)
uint32_t *reg_state = crp->cxl_cstate.crb.cache_mem_registers;
uint32_t *write_msk = crp->cxl_cstate.crb.cache_mem_regs_write_mask;
- cxl_component_register_init_common(reg_state, write_msk, CXL2_ROOT_PORT);
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_ROOT_PORT,
+ true);
}
static void build_dvsecs(PCIDevice *d, CXLComponentState *cxl)
diff --git a/hw/pci-bridge/cxl_upstream.c b/hw/pci-bridge/cxl_upstream.c
index 2655042b2d28..51285744cab8 100644
--- a/hw/pci-bridge/cxl_upstream.c
+++ b/hw/pci-bridge/cxl_upstream.c
@@ -136,7 +136,7 @@ static void latch_registers(CXLUpstreamPort *usp)
uint32_t *write_msk = usp->cxl_cstate.crb.cache_mem_regs_write_mask;
cxl_component_register_init_common(reg_state, write_msk,
- CXL2_UPSTREAM_PORT);
+ CXL2_UPSTREAM_PORT, usp->flitmode);
ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 8);
}
diff --git a/hw/pci-bridge/pci_expander_bridge.c b/hw/pci-bridge/pci_expander_bridge.c
index 1bcceddbc4d7..6e5b404768de 100644
--- a/hw/pci-bridge/pci_expander_bridge.c
+++ b/hw/pci-bridge/pci_expander_bridge.c
@@ -301,7 +301,7 @@ static void pxb_cxl_dev_reset(DeviceState *dev)
uint32_t *write_msk = cxl_cstate->crb.cache_mem_regs_write_mask;
int dsp_count = 0;
- cxl_component_register_init_common(reg_state, write_msk, CXL2_RC);
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_RC, false);
/*
* The CXL specification allows for host bridges with no HDM decoders
* if they only have a single root port.
diff --git a/include/hw/cxl/cxl_component.h b/include/hw/cxl/cxl_component.h
index cd92cb02532a..0ff9f5b0fddf 100644
--- a/include/hw/cxl/cxl_component.h
+++ b/include/hw/cxl/cxl_component.h
@@ -67,6 +67,8 @@ CXLx_CAPABILITY_HEADER(LINK, 2)
CXLx_CAPABILITY_HEADER(HDM, 3)
CXLx_CAPABILITY_HEADER(EXTSEC, 4)
CXLx_CAPABILITY_HEADER(SNOOP, 5)
+CXLx_CAPABILITY_HEADER(BI_RT, 6)
+CXLx_CAPABILITY_HEADER(BI_DECODER, 7)
/*
* Capability structures contain the actual registers that the CXL component
@@ -211,10 +213,55 @@ HDM_DECODER_INIT(3);
(CXL_IDE_REGISTERS_OFFSET + CXL_IDE_REGISTERS_SIZE)
#define CXL_SNOOP_REGISTERS_SIZE 0x8
-QEMU_BUILD_BUG_MSG((CXL_SNOOP_REGISTERS_OFFSET +
- CXL_SNOOP_REGISTERS_SIZE) >= 0x1000,
+#define CXL_BI_RT_CAP_VERSION 1
+#define CXL_BI_RT_REGISTERS_OFFSET \
+ (CXL_SNOOP_REGISTERS_OFFSET + CXL_SNOOP_REGISTERS_SIZE)
+#define CXL_BI_RT_REGISTERS_SIZE 0xC
+
+REG32(CXL_BI_RT_CAPABILITY, CXL_BI_RT_REGISTERS_OFFSET)
+ FIELD(CXL_BI_RT_CAPABILITY, EXPLICIT_COMMIT, 0, 1)
+REG32(CXL_BI_RT_CTRL, CXL_BI_RT_REGISTERS_OFFSET + 0x4)
+ FIELD(CXL_BI_RT_CTRL, COMMIT, 0, 1)
+REG32(CXL_BI_RT_STATUS, CXL_BI_RT_REGISTERS_OFFSET + 0x8)
+ FIELD(CXL_BI_RT_STATUS, COMMITTED, 0, 1)
+ FIELD(CXL_BI_RT_STATUS, ERR_NOT_COMMITTED, 1, 1)
+ FIELD(CXL_BI_RT_STATUS, COMMIT_TMO_SCALE, 8, 4)
+ FIELD(CXL_BI_RT_STATUS, COMMIT_TMO_BASE, 12, 4)
+
+/* CXL r3.2 8.2.4.27 - CXL BI Decoder Capability Structure */
+#define CXL_BI_DECODER_CAP_VERSION 1
+#define CXL_BI_DECODER_REGISTERS_OFFSET \
+ (CXL_BI_RT_REGISTERS_OFFSET + CXL_BI_RT_REGISTERS_SIZE)
+#define CXL_BI_DECODER_REGISTERS_SIZE 0xC
+
+REG32(CXL_BI_DECODER_CAPABILITY, CXL_BI_DECODER_REGISTERS_OFFSET)
+ FIELD(CXL_BI_DECODER_CAPABILITY, HDM_D, 0, 1)
+ FIELD(CXL_BI_DECODER_CAPABILITY, EXPLICIT_COMMIT, 1, 1)
+REG32(CXL_BI_DECODER_CTRL, CXL_BI_DECODER_REGISTERS_OFFSET + 0x4)
+ FIELD(CXL_BI_DECODER_CTRL, BI_FW, 0, 1)
+ FIELD(CXL_BI_DECODER_CTRL, BI_ENABLE, 1, 1)
+ FIELD(CXL_BI_DECODER_CTRL, COMMIT, 2, 1)
+REG32(CXL_BI_DECODER_STATUS, CXL_BI_DECODER_REGISTERS_OFFSET + 0x8)
+ FIELD(CXL_BI_DECODER_STATUS, COMMITTED, 0, 1)
+ FIELD(CXL_BI_DECODER_STATUS, ERR_NOT_COMMITTED, 1, 1)
+ FIELD(CXL_BI_DECODER_STATUS, COMMIT_TMO_SCALE, 8, 4)
+ FIELD(CXL_BI_DECODER_STATUS, COMMIT_TMO_BASE, 12, 4)
+
+QEMU_BUILD_BUG_MSG((CXL_BI_DECODER_REGISTERS_OFFSET +
+ CXL_BI_DECODER_REGISTERS_SIZE) >= 0x1000,
"No space for registers");
+/* track BI explicit commit handling for route table and decoder */
+enum {
+ CXL_BISTATE_RT = 0,
+ CXL_BISTATE_DECODER,
+ CXL_BISTATE_MAX
+};
+
+typedef struct bi_state {
+ uint64_t last_commit; /* last 0->1 transition */
+} BIState;
+
typedef struct component_registers {
/*
* Main memory region to be registered with QEMU core.
@@ -260,6 +307,7 @@ typedef struct cxl_component {
CDATObject cdat;
CXLCompObject compliance;
+ BIState bi_state[CXL_BISTATE_MAX];
} CXLComponentState;
void cxl_component_register_block_init(Object *obj,
@@ -267,7 +315,7 @@ void cxl_component_register_block_init(Object *obj,
const char *type);
void cxl_component_register_init_common(uint32_t *reg_state,
uint32_t *write_msk,
- enum reg_type type);
+ enum reg_type type, bool bi);
void cxl_component_create_dvsec(CXLComponentState *cxl_cstate,
enum reg_type cxl_dev_type, uint16_t length,
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index 98a8af0fbeb5..88634fded80b 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -927,6 +927,9 @@ struct CXLType3Dev {
CXLMemSparingReadAttrs rank_sparing_attrs;
CXLMemSparingWriteAttrs rank_sparing_wr_attrs;
+ /* BI flows */
+ bool hdmdb;
+
struct dynamic_capacity {
HostMemoryBackend *host_dc;
AddressSpace host_dc_as;
--
2.39.5© 2016 - 2025 Red Hat, Inc.