uint8_t is good enough to hold a property "between 0 and 0xff".

Define pullups/pulldowns properties using DEFINE_PROP_UINT8()
macro, remove unnecessary range checks in pl061_realize().
Update the two caller sites.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
v2: qdev_prop_set_uint32 -> qdev_prop_set_uint8 in callers (Peter)
---
 hw/arm/virt.c        |  4 ++--
 hw/gpio/pl061.c      | 16 ++++------------
 hw/vmapple/vmapple.c |  4 ++--
 3 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 175023897a7..28e842f22ea 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -1133,8 +1133,8 @@ static void create_gpio_devices(const VirtMachineState *vms, int gpio,
 
     pl061_dev = qdev_new("pl061");
     /* Pull lines down to 0 if not driven by the PL061 */
-    qdev_prop_set_uint32(pl061_dev, "pullups", 0);
-    qdev_prop_set_uint32(pl061_dev, "pulldowns", 0xff);
+    qdev_prop_set_uint8(pl061_dev, "pullups", 0);
+    qdev_prop_set_uint8(pl061_dev, "pulldowns", 0xff);
     s = SYS_BUS_DEVICE(pl061_dev);
     sysbus_realize_and_unref(s, &error_fatal);
     memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0));
diff --git a/hw/gpio/pl061.c b/hw/gpio/pl061.c
index 1acca3f2f80..a3ac038c2f7 100644
--- a/hw/gpio/pl061.c
+++ b/hw/gpio/pl061.c
@@ -79,8 +79,8 @@ struct PL061State {
     qemu_irq out[N_GPIOS];
     const unsigned char *id;
     /* Properties, for non-Luminary PL061 */
-    uint32_t pullups;
-    uint32_t pulldowns;
+    uint8_t pullups;
+    uint8_t pulldowns;
 };
 
 static const VMStateDescription vmstate_pl061 = {
@@ -547,14 +547,6 @@ static void pl061_realize(DeviceState *dev, Error **errp)
 {
     PL061State *s = PL061(dev);
 
-    if (s->pullups > 0xff) {
-        error_setg(errp, "pullups property must be between 0 and 0xff");
-        return;
-    }
-    if (s->pulldowns > 0xff) {
-        error_setg(errp, "pulldowns property must be between 0 and 0xff");
-        return;
-    }
     if (s->pullups & s->pulldowns) {
         error_setg(errp, "no bit may be set both in pullups and pulldowns");
         return;
@@ -562,8 +554,8 @@ static void pl061_realize(DeviceState *dev, Error **errp)
 }
 
 static const Property pl061_props[] = {
-    DEFINE_PROP_UINT32("pullups", PL061State, pullups, 0xff),
-    DEFINE_PROP_UINT32("pulldowns", PL061State, pulldowns, 0x0),
+    DEFINE_PROP_UINT8("pullups", PL061State, pullups, 0xff),
+    DEFINE_PROP_UINT8("pulldowns", PL061State, pulldowns, 0x0),
 };
 
 static void pl061_class_init(ObjectClass *klass, const void *data)
diff --git a/hw/vmapple/vmapple.c b/hw/vmapple/vmapple.c
index 1e4365f32c9..f3cff329244 100644
--- a/hw/vmapple/vmapple.c
+++ b/hw/vmapple/vmapple.c
@@ -326,8 +326,8 @@ static void create_gpio_devices(const VMAppleMachineState *vms, int gpio,
 
     pl061_dev = qdev_new("pl061");
     /* Pull lines down to 0 if not driven by the PL061 */
-    qdev_prop_set_uint32(pl061_dev, "pullups", 0);
-    qdev_prop_set_uint32(pl061_dev, "pulldowns", 0xff);
+    qdev_prop_set_uint8(pl061_dev, "pullups", 0);
+    qdev_prop_set_uint8(pl061_dev, "pulldowns", 0xff);
     s = SYS_BUS_DEVICE(pl061_dev);
     sysbus_realize_and_unref(s, &error_fatal);
     memory_region_add_subregion(mem, base, sysbus_mmio_get_region(s, 0));
-- 
2.51.0

On Tue, 21 Oct 2025 at 15:53, Philippe Mathieu-Daudé <philmd@linaro.org>
wrote:
>
> uint8_t is good enough to hold a property "between 0 and 0xff".
>
> Define pullups/pulldowns properties using DEFINE_PROP_UINT8()
> macro, remove unnecessary range checks in pl061_realize().
> Update the two caller sites.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> ---
> v2: qdev_prop_set_uint32 -> qdev_prop_set_uint8 in callers (Peter)



Applied to target-arm.next, thanks.

-- PMM

On Tue, 21 Oct 2025 at 15:53, Philippe Mathieu-Daudé <philmd@linaro.org> wrote:
>
> uint8_t is good enough to hold a property "between 0 and 0xff".
>
> Define pullups/pulldowns properties using DEFINE_PROP_UINT8()
> macro, remove unnecessary range checks in pl061_realize().
> Update the two caller sites.
>
> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
> ---
> v2: qdev_prop_set_uint32 -> qdev_prop_set_uint8 in callers (Peter)

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

thanks
-- PMM