From: Anisa Su <anisa.su@samsung.com>
FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5
Signed-off-by: Anisa Su <anisa.su@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
include/hw/cxl/cxl_device.h | 4 ++
hw/cxl/cxl-mailbox-utils.c | 109 ++++++++++++++++++++++++++++++++++++
hw/mem/cxl_type3.c | 8 +--
3 files changed, 117 insertions(+), 4 deletions(-)
diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
index ed91e5387e..fdee60b977 100644
--- a/include/hw/cxl/cxl_device.h
+++ b/include/hw/cxl/cxl_device.h
@@ -728,4 +728,8 @@ void cxl_create_dc_event_records_for_extents(CXLType3Dev *ct3d,
CXLDCEventType type,
CXLDCExtentRaw extents[],
uint32_t ext_count);
+bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
+ uint64_t dpa, uint64_t len);
+bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
+ uint64_t dpa, uint64_t len);
#endif
diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
index d0a1d63582..5ea0d07808 100644
--- a/hw/cxl/cxl-mailbox-utils.c
+++ b/hw/cxl/cxl-mailbox-utils.c
@@ -122,6 +122,7 @@ enum {
#define GET_HOST_DC_REGION_CONFIG 0x1
#define SET_DC_REGION_CONFIG 0x2
#define GET_DC_REGION_EXTENT_LIST 0x3
+ #define INITIATE_DC_ADD 0x4
};
/* CCI Message Format CXL r3.1 Figure 7-19 */
@@ -3542,6 +3543,107 @@ static CXLRetCode cmd_fm_get_dc_region_extent_list(const struct cxl_cmd *cmd,
return CXL_MBOX_SUCCESS;
}
+/*
+ * Helper function to convert CXLDCExtentRaw to CXLUpdateDCExtentListInPl
+ * in order to reuse cxl_detect_malformed_extent_list() function which accepts
+ * CXLUpdateDCExtentListInPl as a parameter.
+ */
+static void convert_raw_extents(CXLDCExtentRaw raw_extents[],
+ CXLUpdateDCExtentListInPl *extent_list,
+ int count)
+{
+ int i;
+
+ extent_list->num_entries_updated = count;
+
+ for (i = 0; i < count; i++) {
+ extent_list->updated_entries[i].start_dpa = raw_extents[i].start_dpa;
+ extent_list->updated_entries[i].len = raw_extents[i].len;
+ }
+}
+
+/* CXL r3.2 Section 7.6.7.6.5 Initiate Dynamic Capacity Add (Opcode 5604h) */
+static CXLRetCode cmd_fm_initiate_dc_add(const struct cxl_cmd *cmd,
+ uint8_t *payload_in,
+ size_t len_in,
+ uint8_t *payload_out,
+ size_t *len_out,
+ CXLCCI *cci)
+{
+ struct {
+ uint16_t host_id;
+ uint8_t selection_policy;
+ uint8_t reg_num;
+ uint64_t length;
+ uint8_t tag[0x10];
+ uint32_t ext_count;
+ CXLDCExtentRaw extents[];
+ } QEMU_PACKED *in = (void *)payload_in;
+ CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
+ int i, rc;
+
+ switch (in->selection_policy) {
+ case CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE: {
+ /* Adding extents exceeds device's extent tracking ability. */
+ if (in->ext_count + ct3d->dc.total_extent_count >
+ CXL_NUM_EXTENTS_SUPPORTED) {
+ return CXL_MBOX_RESOURCES_EXHAUSTED;
+ }
+
+ g_autofree CXLUpdateDCExtentListInPl *list =
+ g_malloc0(sizeof(*list) +
+ in->ext_count * sizeof(*list->updated_entries));
+
+ convert_raw_extents(in->extents, list, in->ext_count);
+ rc = cxl_detect_malformed_extent_list(ct3d, list);
+
+ for (i = 0; i < in->ext_count; i++) {
+ CXLDCExtentRaw *ext = &in->extents[i];
+
+ /* Check requested extents do not overlap with pending ones. */
+ if (cxl_extent_groups_overlaps_dpa_range(&ct3d->dc.extents_pending,
+ ext->start_dpa,
+ ext->len)) {
+ return CXL_MBOX_INVALID_EXTENT_LIST;
+ }
+ /* Check requested extents do not overlap with existing ones. */
+ if (cxl_extents_overlaps_dpa_range(&ct3d->dc.extents,
+ ext->start_dpa,
+ ext->len)) {
+ return CXL_MBOX_INVALID_EXTENT_LIST;
+ }
+ }
+
+ if (rc) {
+ return rc;
+ }
+
+ CXLDCExtentGroup *group = NULL;
+ for (i = 0; i < in->ext_count; i++) {
+ CXLDCExtentRaw *ext = &in->extents[i];
+
+ group = cxl_insert_extent_to_extent_group(group, ext->start_dpa,
+ ext->len, ext->tag,
+ ext->shared_seq);
+ }
+
+ cxl_extent_group_list_insert_tail(&ct3d->dc.extents_pending, group);
+ ct3d->dc.total_extent_count += in->ext_count;
+ cxl_create_dc_event_records_for_extents(ct3d,
+ DC_EVENT_ADD_CAPACITY,
+ in->extents,
+ in->ext_count);
+
+ return CXL_MBOX_SUCCESS;
+ }
+ default: {
+ qemu_log_mask(LOG_UNIMP,
+ "CXL extent selection policy not supported.\n");
+ return CXL_MBOX_INVALID_INPUT;
+ }
+ }
+}
+
static const struct cxl_cmd cxl_cmd_set[256][256] = {
[INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
cmd_infostat_bg_op_abort, 0, 0 },
@@ -3669,6 +3771,13 @@ static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
[FMAPI_DCD_MGMT][GET_DC_REGION_EXTENT_LIST] = { "GET_DC_REGION_EXTENT_LIST",
cmd_fm_get_dc_region_extent_list, 12, 0 },
+ [FMAPI_DCD_MGMT][INITIATE_DC_ADD] = { "INIT_DC_ADD",
+ cmd_fm_initiate_dc_add, ~0,
+ (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
+ CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
+ CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
+ CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
+ CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
};
/*
diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
index 9c2b9d197b..7676d785c2 100644
--- a/hw/mem/cxl_type3.c
+++ b/hw/mem/cxl_type3.c
@@ -1885,8 +1885,8 @@ void qmp_cxl_inject_memory_module_event(const char *path, CxlEventLog log,
* the list.
* Return value: return true if has overlaps; otherwise, return false
*/
-static bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
- uint64_t dpa, uint64_t len)
+bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
+ uint64_t dpa, uint64_t len)
{
CXLDCExtent *ent;
Range range1, range2;
@@ -1931,8 +1931,8 @@ bool cxl_extents_contains_dpa_range(CXLDCExtentList *list,
return false;
}
-static bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
- uint64_t dpa, uint64_t len)
+bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
+ uint64_t dpa, uint64_t len)
{
CXLDCExtentGroup *group;
--
2.48.1On Wed, Jul 02, 2025 at 05:02:16PM +0100, Jonathan Cameron wrote:
> From: Anisa Su <anisa.su@samsung.com>
>
> FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5
>
> Signed-off-by: Anisa Su <anisa.su@samsung.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Only a minor comment inline ...
> ---
> include/hw/cxl/cxl_device.h | 4 ++
> hw/cxl/cxl-mailbox-utils.c | 109 ++++++++++++++++++++++++++++++++++++
> hw/mem/cxl_type3.c | 8 +--
> 3 files changed, 117 insertions(+), 4 deletions(-)
>
> diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> index ed91e5387e..fdee60b977 100644
> --- a/include/hw/cxl/cxl_device.h
> +++ b/include/hw/cxl/cxl_device.h
> @@ -728,4 +728,8 @@ void cxl_create_dc_event_records_for_extents(CXLType3Dev *ct3d,
> CXLDCEventType type,
> CXLDCExtentRaw extents[],
> uint32_t ext_count);
> +bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> + uint64_t dpa, uint64_t len);
> +bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> + uint64_t dpa, uint64_t len);
> #endif
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index d0a1d63582..5ea0d07808 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -122,6 +122,7 @@ enum {
> #define GET_HOST_DC_REGION_CONFIG 0x1
> #define SET_DC_REGION_CONFIG 0x2
> #define GET_DC_REGION_EXTENT_LIST 0x3
> + #define INITIATE_DC_ADD 0x4
> };
>
> /* CCI Message Format CXL r3.1 Figure 7-19 */
> @@ -3542,6 +3543,107 @@ static CXLRetCode cmd_fm_get_dc_region_extent_list(const struct cxl_cmd *cmd,
> return CXL_MBOX_SUCCESS;
> }
>
> +/*
> + * Helper function to convert CXLDCExtentRaw to CXLUpdateDCExtentListInPl
> + * in order to reuse cxl_detect_malformed_extent_list() function which accepts
> + * CXLUpdateDCExtentListInPl as a parameter.
> + */
> +static void convert_raw_extents(CXLDCExtentRaw raw_extents[],
> + CXLUpdateDCExtentListInPl *extent_list,
> + int count)
> +{
> + int i;
> +
> + extent_list->num_entries_updated = count;
> +
> + for (i = 0; i < count; i++) {
> + extent_list->updated_entries[i].start_dpa = raw_extents[i].start_dpa;
> + extent_list->updated_entries[i].len = raw_extents[i].len;
> + }
> +}
> +
> +/* CXL r3.2 Section 7.6.7.6.5 Initiate Dynamic Capacity Add (Opcode 5604h) */
/* CXL r3.2 Section 7.6.7.6.5: Initiate Dynamic Capacity Add (Opcode 5604h) */
Fan
> +static CXLRetCode cmd_fm_initiate_dc_add(const struct cxl_cmd *cmd,
> + uint8_t *payload_in,
> + size_t len_in,
> + uint8_t *payload_out,
> + size_t *len_out,
> + CXLCCI *cci)
> +{
> + struct {
> + uint16_t host_id;
> + uint8_t selection_policy;
> + uint8_t reg_num;
> + uint64_t length;
> + uint8_t tag[0x10];
> + uint32_t ext_count;
> + CXLDCExtentRaw extents[];
> + } QEMU_PACKED *in = (void *)payload_in;
> + CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> + int i, rc;
> +
> + switch (in->selection_policy) {
> + case CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE: {
> + /* Adding extents exceeds device's extent tracking ability. */
> + if (in->ext_count + ct3d->dc.total_extent_count >
> + CXL_NUM_EXTENTS_SUPPORTED) {
> + return CXL_MBOX_RESOURCES_EXHAUSTED;
> + }
> +
> + g_autofree CXLUpdateDCExtentListInPl *list =
> + g_malloc0(sizeof(*list) +
> + in->ext_count * sizeof(*list->updated_entries));
> +
> + convert_raw_extents(in->extents, list, in->ext_count);
> + rc = cxl_detect_malformed_extent_list(ct3d, list);
> +
> + for (i = 0; i < in->ext_count; i++) {
> + CXLDCExtentRaw *ext = &in->extents[i];
> +
> + /* Check requested extents do not overlap with pending ones. */
> + if (cxl_extent_groups_overlaps_dpa_range(&ct3d->dc.extents_pending,
> + ext->start_dpa,
> + ext->len)) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> + /* Check requested extents do not overlap with existing ones. */
> + if (cxl_extents_overlaps_dpa_range(&ct3d->dc.extents,
> + ext->start_dpa,
> + ext->len)) {
> + return CXL_MBOX_INVALID_EXTENT_LIST;
> + }
> + }
> +
> + if (rc) {
> + return rc;
> + }
> +
> + CXLDCExtentGroup *group = NULL;
> + for (i = 0; i < in->ext_count; i++) {
> + CXLDCExtentRaw *ext = &in->extents[i];
> +
> + group = cxl_insert_extent_to_extent_group(group, ext->start_dpa,
> + ext->len, ext->tag,
> + ext->shared_seq);
> + }
> +
> + cxl_extent_group_list_insert_tail(&ct3d->dc.extents_pending, group);
> + ct3d->dc.total_extent_count += in->ext_count;
> + cxl_create_dc_event_records_for_extents(ct3d,
> + DC_EVENT_ADD_CAPACITY,
> + in->extents,
> + in->ext_count);
> +
> + return CXL_MBOX_SUCCESS;
> + }
> + default: {
> + qemu_log_mask(LOG_UNIMP,
> + "CXL extent selection policy not supported.\n");
> + return CXL_MBOX_INVALID_INPUT;
> + }
> + }
> +}
> +
> static const struct cxl_cmd cxl_cmd_set[256][256] = {
> [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
> cmd_infostat_bg_op_abort, 0, 0 },
> @@ -3669,6 +3771,13 @@ static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
> CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> [FMAPI_DCD_MGMT][GET_DC_REGION_EXTENT_LIST] = { "GET_DC_REGION_EXTENT_LIST",
> cmd_fm_get_dc_region_extent_list, 12, 0 },
> + [FMAPI_DCD_MGMT][INITIATE_DC_ADD] = { "INIT_DC_ADD",
> + cmd_fm_initiate_dc_add, ~0,
> + (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
> + CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
> + CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> + CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> + CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> };
>
> /*
> diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> index 9c2b9d197b..7676d785c2 100644
> --- a/hw/mem/cxl_type3.c
> +++ b/hw/mem/cxl_type3.c
> @@ -1885,8 +1885,8 @@ void qmp_cxl_inject_memory_module_event(const char *path, CxlEventLog log,
> * the list.
> * Return value: return true if has overlaps; otherwise, return false
> */
> -static bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> - uint64_t dpa, uint64_t len)
> +bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> + uint64_t dpa, uint64_t len)
> {
> CXLDCExtent *ent;
> Range range1, range2;
> @@ -1931,8 +1931,8 @@ bool cxl_extents_contains_dpa_range(CXLDCExtentList *list,
> return false;
> }
>
> -static bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> - uint64_t dpa, uint64_t len)
> +bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> + uint64_t dpa, uint64_t len)
> {
> CXLDCExtentGroup *group;
>
> --
> 2.48.1
>
--
Fan Ni (From gmail)
On Thu, 3 Jul 2025 16:23:57 +0000
Fan Ni <nifan.cxl@gmail.com> wrote:
> On Wed, Jul 02, 2025 at 05:02:16PM +0100, Jonathan Cameron wrote:
> > From: Anisa Su <anisa.su@samsung.com>
> >
> > FM DCD Management command 0x5604 implemented per CXL r3.2 Spec Section 7.6.7.6.5
> >
> > Signed-off-by: Anisa Su <anisa.su@samsung.com>
> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>
> Reviewed-by: Fan Ni <fan.ni@samsung.com>
>
> Only a minor comment inline ...
Thanks!
Michael, I'll let these sit for a little while but if it is helpful
for you if I do a v2 with the colon added just let me know.
Jonathan
> > ---
> > include/hw/cxl/cxl_device.h | 4 ++
> > hw/cxl/cxl-mailbox-utils.c | 109 ++++++++++++++++++++++++++++++++++++
> > hw/mem/cxl_type3.c | 8 +--
> > 3 files changed, 117 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/hw/cxl/cxl_device.h b/include/hw/cxl/cxl_device.h
> > index ed91e5387e..fdee60b977 100644
> > --- a/include/hw/cxl/cxl_device.h
> > +++ b/include/hw/cxl/cxl_device.h
> > @@ -728,4 +728,8 @@ void cxl_create_dc_event_records_for_extents(CXLType3Dev *ct3d,
> > CXLDCEventType type,
> > CXLDCExtentRaw extents[],
> > uint32_t ext_count);
> > +bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> > + uint64_t dpa, uint64_t len);
> > +bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> > + uint64_t dpa, uint64_t len);
> > #endif
> > diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> > index d0a1d63582..5ea0d07808 100644
> > --- a/hw/cxl/cxl-mailbox-utils.c
> > +++ b/hw/cxl/cxl-mailbox-utils.c
> > @@ -122,6 +122,7 @@ enum {
> > #define GET_HOST_DC_REGION_CONFIG 0x1
> > #define SET_DC_REGION_CONFIG 0x2
> > #define GET_DC_REGION_EXTENT_LIST 0x3
> > + #define INITIATE_DC_ADD 0x4
> > };
> >
> > /* CCI Message Format CXL r3.1 Figure 7-19 */
> > @@ -3542,6 +3543,107 @@ static CXLRetCode cmd_fm_get_dc_region_extent_list(const struct cxl_cmd *cmd,
> > return CXL_MBOX_SUCCESS;
> > }
> >
> > +/*
> > + * Helper function to convert CXLDCExtentRaw to CXLUpdateDCExtentListInPl
> > + * in order to reuse cxl_detect_malformed_extent_list() function which accepts
> > + * CXLUpdateDCExtentListInPl as a parameter.
> > + */
> > +static void convert_raw_extents(CXLDCExtentRaw raw_extents[],
> > + CXLUpdateDCExtentListInPl *extent_list,
> > + int count)
> > +{
> > + int i;
> > +
> > + extent_list->num_entries_updated = count;
> > +
> > + for (i = 0; i < count; i++) {
> > + extent_list->updated_entries[i].start_dpa = raw_extents[i].start_dpa;
> > + extent_list->updated_entries[i].len = raw_extents[i].len;
> > + }
> > +}
> > +
> > +/* CXL r3.2 Section 7.6.7.6.5 Initiate Dynamic Capacity Add (Opcode 5604h) */
>
> /* CXL r3.2 Section 7.6.7.6.5: Initiate Dynamic Capacity Add (Opcode 5604h) */
>
> Fan
>
> > +static CXLRetCode cmd_fm_initiate_dc_add(const struct cxl_cmd *cmd,
> > + uint8_t *payload_in,
> > + size_t len_in,
> > + uint8_t *payload_out,
> > + size_t *len_out,
> > + CXLCCI *cci)
> > +{
> > + struct {
> > + uint16_t host_id;
> > + uint8_t selection_policy;
> > + uint8_t reg_num;
> > + uint64_t length;
> > + uint8_t tag[0x10];
> > + uint32_t ext_count;
> > + CXLDCExtentRaw extents[];
> > + } QEMU_PACKED *in = (void *)payload_in;
> > + CXLType3Dev *ct3d = CXL_TYPE3(cci->d);
> > + int i, rc;
> > +
> > + switch (in->selection_policy) {
> > + case CXL_EXTENT_SELECTION_POLICY_PRESCRIPTIVE: {
> > + /* Adding extents exceeds device's extent tracking ability. */
> > + if (in->ext_count + ct3d->dc.total_extent_count >
> > + CXL_NUM_EXTENTS_SUPPORTED) {
> > + return CXL_MBOX_RESOURCES_EXHAUSTED;
> > + }
> > +
> > + g_autofree CXLUpdateDCExtentListInPl *list =
> > + g_malloc0(sizeof(*list) +
> > + in->ext_count * sizeof(*list->updated_entries));
> > +
> > + convert_raw_extents(in->extents, list, in->ext_count);
> > + rc = cxl_detect_malformed_extent_list(ct3d, list);
> > +
> > + for (i = 0; i < in->ext_count; i++) {
> > + CXLDCExtentRaw *ext = &in->extents[i];
> > +
> > + /* Check requested extents do not overlap with pending ones. */
> > + if (cxl_extent_groups_overlaps_dpa_range(&ct3d->dc.extents_pending,
> > + ext->start_dpa,
> > + ext->len)) {
> > + return CXL_MBOX_INVALID_EXTENT_LIST;
> > + }
> > + /* Check requested extents do not overlap with existing ones. */
> > + if (cxl_extents_overlaps_dpa_range(&ct3d->dc.extents,
> > + ext->start_dpa,
> > + ext->len)) {
> > + return CXL_MBOX_INVALID_EXTENT_LIST;
> > + }
> > + }
> > +
> > + if (rc) {
> > + return rc;
> > + }
> > +
> > + CXLDCExtentGroup *group = NULL;
> > + for (i = 0; i < in->ext_count; i++) {
> > + CXLDCExtentRaw *ext = &in->extents[i];
> > +
> > + group = cxl_insert_extent_to_extent_group(group, ext->start_dpa,
> > + ext->len, ext->tag,
> > + ext->shared_seq);
> > + }
> > +
> > + cxl_extent_group_list_insert_tail(&ct3d->dc.extents_pending, group);
> > + ct3d->dc.total_extent_count += in->ext_count;
> > + cxl_create_dc_event_records_for_extents(ct3d,
> > + DC_EVENT_ADD_CAPACITY,
> > + in->extents,
> > + in->ext_count);
> > +
> > + return CXL_MBOX_SUCCESS;
> > + }
> > + default: {
> > + qemu_log_mask(LOG_UNIMP,
> > + "CXL extent selection policy not supported.\n");
> > + return CXL_MBOX_INVALID_INPUT;
> > + }
> > + }
> > +}
> > +
> > static const struct cxl_cmd cxl_cmd_set[256][256] = {
> > [INFOSTAT][BACKGROUND_OPERATION_ABORT] = { "BACKGROUND_OPERATION_ABORT",
> > cmd_infostat_bg_op_abort, 0, 0 },
> > @@ -3669,6 +3771,13 @@ static const struct cxl_cmd cxl_cmd_set_fm_dcd[256][256] = {
> > CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> > [FMAPI_DCD_MGMT][GET_DC_REGION_EXTENT_LIST] = { "GET_DC_REGION_EXTENT_LIST",
> > cmd_fm_get_dc_region_extent_list, 12, 0 },
> > + [FMAPI_DCD_MGMT][INITIATE_DC_ADD] = { "INIT_DC_ADD",
> > + cmd_fm_initiate_dc_add, ~0,
> > + (CXL_MBOX_CONFIG_CHANGE_COLD_RESET |
> > + CXL_MBOX_CONFIG_CHANGE_CONV_RESET |
> > + CXL_MBOX_CONFIG_CHANGE_CXL_RESET |
> > + CXL_MBOX_IMMEDIATE_CONFIG_CHANGE |
> > + CXL_MBOX_IMMEDIATE_DATA_CHANGE) },
> > };
> >
> > /*
> > diff --git a/hw/mem/cxl_type3.c b/hw/mem/cxl_type3.c
> > index 9c2b9d197b..7676d785c2 100644
> > --- a/hw/mem/cxl_type3.c
> > +++ b/hw/mem/cxl_type3.c
> > @@ -1885,8 +1885,8 @@ void qmp_cxl_inject_memory_module_event(const char *path, CxlEventLog log,
> > * the list.
> > * Return value: return true if has overlaps; otherwise, return false
> > */
> > -static bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> > - uint64_t dpa, uint64_t len)
> > +bool cxl_extents_overlaps_dpa_range(CXLDCExtentList *list,
> > + uint64_t dpa, uint64_t len)
> > {
> > CXLDCExtent *ent;
> > Range range1, range2;
> > @@ -1931,8 +1931,8 @@ bool cxl_extents_contains_dpa_range(CXLDCExtentList *list,
> > return false;
> > }
> >
> > -static bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> > - uint64_t dpa, uint64_t len)
> > +bool cxl_extent_groups_overlaps_dpa_range(CXLDCExtentGroupList *list,
> > + uint64_t dpa, uint64_t len)
> > {
> > CXLDCExtentGroup *group;
> >
> > --
> > 2.48.1
> >
>
© 2016 - 2025 Red Hat, Inc.