Signed-off-by: John Snow <jsnow@redhat.com>
---
qapi/migration.json | 62 ++++++++++++++++++++++-----------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/qapi/migration.json b/qapi/migration.json
index d7c5047462e..fec6479a23e 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -193,14 +193,14 @@
#
# Information about current migration process.
#
-# @status: @MigrationStatus describing the current migration status.
+# @status: `MigrationStatus` describing the current migration status.
# If this field is not returned, no migration process has been
# initiated
#
-# @ram: @MigrationStats containing detailed migration status, only
+# @ram: `MigrationStats` containing detailed migration status, only
# returned if status is 'active' or 'completed'(since 1.2)
#
-# @xbzrle-cache: @XBZRLECacheStats containing detailed XBZRLE
+# @xbzrle-cache: `XBZRLECacheStats` containing detailed XBZRLE
# migration statistics, only returned if XBZRLE feature is on and
# status is 'active' or 'completed' (since 1.2)
#
@@ -239,7 +239,7 @@
# @socket-address: Only used for tcp, to know what the real port is
# (Since 4.0)
#
-# @vfio: @VfioStats containing detailed VFIO devices migration
+# @vfio: `VfioStats` containing detailed VFIO devices migration
# statistics, only returned if VFIO device is present, migration
# is supported by all VFIO devices and status is 'active' or
# 'completed' (since 5.2)
@@ -250,7 +250,7 @@
#
# @dirty-limit-throttle-time-per-round: Maximum throttle time (in
# microseconds) of virtual CPUs each dirty ring full round, which
-# shows how MigrationCapability dirty-limit affects the guest
+# shows how `MigrationCapability` dirty-limit affects the guest
# during live migration. (Since 8.1)
#
# @dirty-limit-ring-full-time: Estimated average dirty ring full time
@@ -587,7 +587,7 @@
#
# @normal: the original form of migration. (since 8.2)
#
-# @cpr-reboot: The migrate command stops the VM and saves state to the
+# @cpr-reboot: The `migrate` command stops the VM and saves state to the
# URI. After quitting QEMU, the user resumes by running QEMU
# -incoming.
#
@@ -635,7 +635,7 @@
#
# New QEMU reads the CPR channel before opening a monitor, hence
# the CPR channel cannot be specified in the list of channels for
-# a migrate-incoming command. It may only be specified on the
+# a `migrate-incoming` command. It may only be specified on the
# command line.
#
# The main channel address cannot be a file type, and for an
@@ -646,10 +646,10 @@
# memory-backend-epc is not supported. The VM must be started
# with the '-machine aux-ram-share=on' option.
#
-# When using -incoming defer, you must issue the migrate command
+# When using -incoming defer, you must issue the `migrate` command
# to old QEMU before issuing any monitor commands to new QEMU.
# However, new QEMU does not open and read the migration stream
-# until you issue the migrate incoming command.
+# until you issue the `migrate` incoming command.
#
# (since 10.0)
##
@@ -871,11 +871,11 @@
# @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration.
# Defaults to 1. (Since 8.1)
#
-# @mode: Migration mode. See description in @MigMode. Default is
+# @mode: Migration mode. See description in `MigMode`. Default is
# 'normal'. (Since 8.2)
#
# @zero-page-detection: Whether and how to detect zero pages.
-# See description in @ZeroPageDetection. Default is 'multifd'.
+# See description in `ZeroPageDetection`. Default is 'multifd'.
# (since 9.0)
#
# @direct-io: Open migration files with O_DIRECT when possible. This
@@ -1052,11 +1052,11 @@
# @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration.
# Defaults to 1. (Since 8.1)
#
-# @mode: Migration mode. See description in @MigMode. Default is
+# @mode: Migration mode. See description in `MigMode`. Default is
# 'normal'. (Since 8.2)
#
# @zero-page-detection: Whether and how to detect zero pages.
-# See description in @ZeroPageDetection. Default is 'multifd'.
+# See description in `ZeroPageDetection`. Default is 'multifd'.
# (since 9.0)
#
# @direct-io: Open migration files with O_DIRECT when possible. This
@@ -1068,8 +1068,8 @@
# @unstable: Members @x-checkpoint-delay and
# @x-vcpu-dirty-limit-period are experimental.
#
-# TODO: either fuse back into MigrationParameters, or make
-# MigrationParameters members mandatory
+# TODO: either fuse back into `MigrationParameters`, or make
+# `MigrationParameters` members mandatory
#
# Since: 2.4
##
@@ -1262,11 +1262,11 @@
# @vcpu-dirty-limit: Dirtyrate limit (MB/s) during live migration.
# Defaults to 1. (Since 8.1)
#
-# @mode: Migration mode. See description in @MigMode. Default is
+# @mode: Migration mode. See description in `MigMode`. Default is
# 'normal'. (Since 8.2)
#
# @zero-page-detection: Whether and how to detect zero pages.
-# See description in @ZeroPageDetection. Default is 'multifd'.
+# See description in `ZeroPageDetection`. Default is 'multifd'.
# (since 9.0)
#
# @direct-io: Open migration files with O_DIRECT when possible. This
@@ -1356,7 +1356,7 @@
#
# Emitted when a migration event happens
#
-# @status: @MigrationStatus describing the current migration status.
+# @status: `MigrationStatus` describing the current migration status.
#
# Since: 2.4
#
@@ -1477,8 +1477,8 @@
# The reason for a COLO exit.
#
# @none: failover has never happened. This state does not occur in
-# the COLO_EXIT event, and is only visible in the result of
-# query-colo-status.
+# the `COLO_EXIT` event, and is only visible in the result of
+# `query-colo-status`.
#
# @request: COLO exit is due to an external request.
#
@@ -1733,8 +1733,8 @@
# list connected to a destination interface endpoint.
#
# @exit-on-error: Exit on incoming migration failure. Default true.
-# When set to false, the failure triggers a MIGRATION event, and
-# error details could be retrieved with query-migrate.
+# When set to false, the failure triggers a :qapi:event:`MIGRATION`
+# event, and error details could be retrieved with `query-migrate`.
# (since 9.1)
#
# Since: 2.3
@@ -1746,7 +1746,7 @@
# already exposed above libvirt.
#
# 2. QEMU must be started with -incoming defer to allow
-# migrate-incoming to be used.
+# `migrate-incoming` to be used.
#
# 3. The uri format is the same as for -incoming
#
@@ -1799,7 +1799,7 @@
# devices of the VM are not saved by this command.
#
# @filename: the file to save the state of the devices to as binary
-# data. See xen-save-devices-state.txt for a description of the
+# data. See `xen-save-devices-state`.txt for a description of the
# binary format.
#
# @live: Optional argument to ask QEMU to treat this command as part
@@ -1840,7 +1840,7 @@
# devices of the VM are not loaded by this command.
#
# @filename: the file to load the state of the devices from as binary
-# data. See xen-save-devices-state.txt for a description of the
+# data. See `xen-save-devices-state`.txt for a description of the
# binary format.
#
# Since: 2.7
@@ -2049,7 +2049,7 @@
# @DirtyRateMeasureMode:
#
# Method used to measure dirty page rate. Differences between
-# available methods are explained in @calc-dirty-rate.
+# available methods are explained in `calc-dirty-rate`.
#
# @page-sampling: use page sampling
#
@@ -2117,7 +2117,7 @@
# @calc-dirty-rate:
#
# Start measuring dirty page rate of the VM. Results can be retrieved
-# with @query-dirty-rate after measurements are completed.
+# with `query-dirty-rate` after measurements are completed.
#
# Dirty page rate is the number of pages changed in a given time
# period expressed in MiB/s. The following methods of calculation are
@@ -2190,7 +2190,7 @@
##
# @query-dirty-rate:
#
-# Query results of the most recent invocation of @calc-dirty-rate.
+# Query results of the most recent invocation of `calc-dirty-rate`.
#
# @calc-time-unit: time unit in which to report calculation time.
# By default it is reported in seconds. (Since 8.2)
@@ -2240,7 +2240,7 @@
#
# Requires KVM with accelerator property "dirty-ring-size" set. A
# virtual CPU's dirty page rate is a measure of its memory load. To
-# observe dirty page rates, use @calc-dirty-rate.
+# observe dirty page rates, use `calc-dirty-rate`.
#
# @cpu-index: index of a virtual CPU, default is all.
#
@@ -2265,7 +2265,7 @@
# Cancel the upper limit of dirty page rate for virtual CPUs.
#
# Cancel the dirty page limit for the vCPU which has been set with
-# set-vcpu-dirty-limit command. Note that this command requires
+# `set-vcpu-dirty-limit` command. Note that this command requires
# support from dirty ring, same as the "set-vcpu-dirty-limit".
#
# @cpu-index: index of a virtual CPU, default is all.
@@ -2423,7 +2423,7 @@
# time it takes to load the snapshot.
#
# It is strongly recommended that @devices contain all writable block
-# device nodes that can have changed since the original @snapshot-save
+# device nodes that can have changed since the original `snapshot-save`
# command execution.
#
# .. qmp-example::
--
2.48.1