Improve awkward phrasing in migrate-incoming While there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
qapi/audio.json | 8 ++++----
qapi/block-core.json | 10 +++++-----
qapi/block-export.json | 2 +-
qapi/char.json | 6 +++---
qapi/introspect.json | 4 ++--
qapi/migration.json | 8 ++++----
qapi/run-state.json | 6 +++---
qapi/transaction.json | 2 +-
qapi/uefi.json | 2 +-
qapi/ui.json | 4 ++--
10 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/qapi/audio.json b/qapi/audio.json
index 49633cf317..67f36f1cfe 100644
--- a/qapi/audio.json
+++ b/qapi/audio.json
@@ -309,9 +309,9 @@
#
# @name: name of the sink/source to use
#
-# @stream-name: name of the PulseAudio stream created by qemu. Can be
+# @stream-name: name of the PulseAudio stream created by QEMU. Can be
# used to identify the stream in PulseAudio when you create
-# multiple PulseAudio devices or run multiple qemu instances
+# multiple PulseAudio devices or run multiple QEMU instances
# (default: audiodev's id, since 4.2)
#
# @latency: latency you want PulseAudio to achieve in microseconds
@@ -353,9 +353,9 @@
#
# @name: name of the sink/source to use
#
-# @stream-name: name of the PipeWire stream created by qemu. Can be
+# @stream-name: name of the PipeWire stream created by QEMU. Can be
# used to identify the stream in PipeWire when you create multiple
-# PipeWire devices or run multiple qemu instances (default:
+# PipeWire devices or run multiple QEMU instances (default:
# audiodev's id)
#
# @latency: latency you want PipeWire to achieve in microseconds
diff --git a/qapi/block-core.json b/qapi/block-core.json
index cc48fc7122..b6447e847e 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -2030,7 +2030,7 @@
#
# @id: Block graph node identifier. This @id is generated only for
# x-debug-query-block-graph and does not relate to any other
-# identifiers in Qemu.
+# identifiers in QEMU.
#
# @type: Type of graph node. Can be one of block-backend, block-job
# or block-driver-state.
@@ -2794,7 +2794,7 @@
# The node that receives the data is called the top image, can be
# located in any part of the chain (but always above the base image;
# see below) and can be specified using its device or node name.
-# Earlier qemu versions only allowed 'device' to name the top level
+# Earlier QEMU versions only allowed 'device' to name the top level
# node; presence of the 'base-node' parameter during introspection can
# be used as a witness of the enhanced semantics of 'device'.
#
@@ -3196,7 +3196,7 @@
#
# Selects the AIO backend to handle I/O requests
#
-# @threads: Use qemu's thread pool
+# @threads: Use QEMU's thread pool
#
# @native: Use native AIO backend (only Linux and Windows)
#
@@ -5157,10 +5157,10 @@
##
# @BlockdevQcow2Version:
#
-# @v2: The original QCOW2 format as introduced in qemu 0.10 (version
+# @v2: The original QCOW2 format as introduced in QEMU 0.10 (version
# 2)
#
-# @v3: The extended QCOW2 format as introduced in qemu 1.1 (version 3)
+# @v3: The extended QCOW2 format as introduced in QEMU 1.1 (version 3)
#
# Since: 2.12
##
diff --git a/qapi/block-export.json b/qapi/block-export.json
index 04190b503c..ed4deb54db 100644
--- a/qapi/block-export.json
+++ b/qapi/block-export.json
@@ -169,7 +169,7 @@
# @growable: Whether writes beyond the EOF should grow the block node
# accordingly. (default: false)
#
-# @allow-other: If this is off, only qemu's user is allowed access to
+# @allow-other: If this is off, only QEMU's user is allowed access to
# this export. That cannot be changed even with chmod or chown.
# Enabling this option will allow other users access to the export
# with the FUSE mount option "allow_other". Note that using
diff --git a/qapi/char.json b/qapi/char.json
index 9ad9d11cf6..f1d8b503dd 100644
--- a/qapi/char.json
+++ b/qapi/char.json
@@ -351,7 +351,7 @@
# Configuration info for stdio chardevs.
#
# @signal: Allow signals (such as SIGINT triggered by ^C) be delivered
-# to qemu. Default: true.
+# to QEMU. Default: true.
#
# Since: 1.5
##
@@ -443,7 +443,7 @@
##
# @ChardevQemuVDAgent:
#
-# Configuration info for qemu vdagent implementation.
+# Configuration info for QEMU vdagent implementation.
#
# @mouse: enable/disable mouse, default is enabled.
#
@@ -656,7 +656,7 @@
##
# @ChardevQemuVDAgentWrapper:
#
-# @data: Configuration info for qemu vdagent implementation
+# @data: Configuration info for QEMU vdagent implementation
#
# Since: 6.1
##
diff --git a/qapi/introspect.json b/qapi/introspect.json
index 95724ee2d2..e9e0297282 100644
--- a/qapi/introspect.json
+++ b/qapi/introspect.json
@@ -26,9 +26,9 @@
# the QAPI schema.
#
# Furthermore, while we strive to keep the QMP wire format
-# backwards-compatible across qemu versions, the introspection output
+# backwards-compatible across QEMU versions, the introspection output
# is not guaranteed to have the same stability. For example, one
-# version of qemu may list an object member as an optional
+# version of QEMU may list an object member as an optional
# non-variant, while another lists the same member only through the
# object's variants; or the type of a member may change from a generic
# string into a specific enum or from one specific type into an
diff --git a/qapi/migration.json b/qapi/migration.json
index 0e5a656cc9..461f9f0892 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -415,7 +415,7 @@
# on secondary side, this process is called COarse-Grain LOck
# Stepping (COLO) for Non-stop Service. (since 2.8)
#
-# @release-ram: if enabled, qemu will free the migrated ram pages on
+# @release-ram: if enabled, QEMU will free the migrated ram pages on
# the source during postcopy-ram migration. (since 2.9)
#
# @return-path: If enabled, migration will use the return path even
@@ -1500,7 +1500,7 @@
##
# @x-colo-lost-heartbeat:
#
-# Tell qemu that heartbeat is lost, request it to do takeover
+# Tell QEMU that heartbeat is lost, request it to do takeover
# procedures. If this command is sent to the PVM, the Primary side
# will exit COLO mode. If sent to the Secondary, the Secondary side
# will run failover work, then takes over server operation to become
@@ -1729,8 +1729,8 @@
##
# @migrate-incoming:
#
-# Start an incoming migration, the qemu must have been started with
-# -incoming defer
+# Start an incoming migration. QEMU must have been started with
+# -incoming defer.
#
# @uri: The Uniform Resource Identifier identifying the source or
# address to listen on
diff --git a/qapi/run-state.json b/qapi/run-state.json
index 4e44da63a0..eee61edff4 100644
--- a/qapi/run-state.json
+++ b/qapi/run-state.json
@@ -135,19 +135,19 @@
##
# @SHUTDOWN:
#
-# Emitted when the virtual machine has shut down, indicating that qemu
+# Emitted when the virtual machine has shut down, indicating that QEMU
# is about to exit.
#
# @guest: If true, the shutdown was triggered by a guest request (such
# as a guest-initiated ACPI shutdown request or other
# hardware-specific action) rather than a host request (such as
-# sending qemu a SIGINT). (since 2.10)
+# sending QEMU a SIGINT). (since 2.10)
#
# @reason: The @ShutdownCause which resulted in the SHUTDOWN.
# (since 4.0)
#
# .. note:: If the command-line option ``-no-shutdown`` has been
-# specified, qemu will not exit, and a STOP event will eventually
+# specified, QEMU will not exit, and a STOP event will eventually
# follow the SHUTDOWN event.
#
# Since: 0.12
diff --git a/qapi/transaction.json b/qapi/transaction.json
index 021e383496..5c3394919e 100644
--- a/qapi/transaction.json
+++ b/qapi/transaction.json
@@ -223,7 +223,7 @@
# exists, the request will be rejected. Only some image formats
# support it, for example, qcow2, and rbd,
#
-# On failure, qemu will try delete the newly created internal snapshot
+# On failure, QEMU will try delete the newly created internal snapshot
# in the transaction. When an I/O error occurs during deletion, the
# user needs to fix it later with qemu-img or other command.
#
diff --git a/qapi/uefi.json b/qapi/uefi.json
index bdfcabe1df..6592183d6c 100644
--- a/qapi/uefi.json
+++ b/qapi/uefi.json
@@ -5,7 +5,7 @@
##
# = UEFI Variable Store
#
-# The qemu efi variable store implementation (hw/uefi/) uses this to
+# The QEMU efi variable store implementation (hw/uefi/) uses this to
# store non-volatile variables in json format on disk.
#
# This is an existing format already supported by (at least) two other
diff --git a/qapi/ui.json b/qapi/ui.json
index 3991329668..5939947b76 100644
--- a/qapi/ui.json
+++ b/qapi/ui.json
@@ -1526,12 +1526,12 @@
#
# Display (user interface) options.
#
-# @type: Which DisplayType qemu should use.
+# @type: Which DisplayType QEMU should use.
#
# @full-screen: Start user interface in fullscreen mode
# (default: off).
#
-# @window-close: Allow to quit qemu with window close button
+# @window-close: Allow to quit QEMU with window close button
# (default: on).
#
# @show-cursor: Force showing the mouse cursor (default: off).
--
2.48.1