Currently, ASPEED_DEV_SPI_BOOT is set to "0x400000000", which is the DRAM start
address, and the QEMU loader is used to load the U-Boot binary into this address.

However, if users want to install FMC flash contents as a boot ROM, the DRAM
address 0x400000000 would be overwritten with Boot ROM data. This causes the
AST2700 to fail to boot because the U-Boot data becomes incorrect.

To fix this, change the ASPEED_DEV_SPI_BOOT address to "0x100000000", which is
the FMC0 memory-mapped start address in the AST2700.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
 hw/arm/aspeed_ast27x0.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 92487bf229..10e1358166 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -24,7 +24,7 @@
 #include "qemu/log.h"
 
 static const hwaddr aspeed_soc_ast2700_memmap[] = {
-    [ASPEED_DEV_SPI_BOOT]  =  0x400000000,
+    [ASPEED_DEV_SPI_BOOT]  =  0x100000000,
     [ASPEED_DEV_SRAM]      =  0x10000000,
     [ASPEED_DEV_SDMC]      =  0x12C00000,
     [ASPEED_DEV_SCU]       =  0x12C02000,
-- 
2.34.1