When not specified, Cortex-A9MP configures its GIC with 64 external
IRQs, (see commit a32134aad89 "arm:make the number of GIC interrupts
configurable"), and Cortex-15MP to 128 (see commit  528622421eb
"hw/cpu/a15mpcore: Correct default value for num-irq").
The Caldexa Highbank board however expects a fixed set of 128
interrupts (see the fixed IRQ length when this board was added in
commit 2488514cef2 ("arm: SoC model for Calxeda Highbank"). Add the
GIC_EXT_IRQS definition (with a comment) to make that explicit.

Except explicitly setting a property value to its same implicit
value, there is no logical change intended.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
 hw/arm/highbank.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c
index 495704d9726..0f3c207d548 100644
--- a/hw/arm/highbank.c
+++ b/hw/arm/highbank.c
@@ -45,7 +45,7 @@
 #define MVBAR_ADDR              0x200
 #define BOARD_SETUP_ADDR        (MVBAR_ADDR + 8 * sizeof(uint32_t))
 
-#define NIRQ_GIC                160
+#define GIC_EXT_IRQS            128 /* EnergyCore ECX-1000 & ECX-2000 */
 
 /* Board init.  */
 
@@ -180,7 +180,7 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
 {
     DeviceState *dev = NULL;
     SysBusDevice *busdev;
-    qemu_irq pic[128];
+    qemu_irq pic[GIC_EXT_IRQS];
     int n;
     unsigned int smp_cpus = machine->smp.cpus;
     qemu_irq cpu_irq[4];
@@ -260,7 +260,7 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
         break;
     }
     qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
-    qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
+    qdev_prop_set_uint32(dev, "num-irq", GIC_EXT_IRQS + GIC_INTERNAL);
     busdev = SYS_BUS_DEVICE(dev);
     sysbus_realize_and_unref(busdev, &error_fatal);
     sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
@@ -271,7 +271,7 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
         sysbus_connect_irq(busdev, n + 3 * smp_cpus, cpu_vfiq[n]);
     }
 
-    for (n = 0; n < 128; n++) {
+    for (n = 0; n < GIC_EXT_IRQS; n++) {
         pic[n] = qdev_get_gpio_in(dev, n);
     }
 
-- 
2.47.1

On 2/12/25 07:43, Philippe Mathieu-Daudé wrote:
> When not specified, Cortex-A9MP configures its GIC with 64 external
> IRQs, (see commit a32134aad89 "arm:make the number of GIC interrupts
> configurable"), and Cortex-15MP to 128 (see commit  528622421eb
> "hw/cpu/a15mpcore: Correct default value for num-irq").
> The Caldexa Highbank board however expects a fixed set of 128
> interrupts (see the fixed IRQ length when this board was added in
> commit 2488514cef2 ("arm: SoC model for Calxeda Highbank"). Add the
> GIC_EXT_IRQS definition (with a comment) to make that explicit.
> 
> Except explicitly setting a property value to its same implicit
> value, there is no logical change intended.
> 
> Signed-off-by: Philippe Mathieu-Daudé<philmd@linaro.org>
> ---
>   hw/arm/highbank.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>

r~